From: Ben Gras <ben@minix3.org>
Date: Mon, 8 Aug 2005 17:37:39 +0000 (+0000)
Subject: More nits and polish
X-Git-Tag: v3.1.0~396
X-Git-Url: http://zhaoyanbai.com/repos/rndc-confgen.html?a=commitdiff_plain;h=560466ed8e9dcb4cd1051a3e8a242d2c7a14fa81;p=minix.git

More nits and polish
---

diff --git a/commands/scripts/setup.sh b/commands/scripts/setup.sh
index 5cfe49011..e19eb048f 100755
--- a/commands/scripts/setup.sh
+++ b/commands/scripts/setup.sh
@@ -238,11 +238,11 @@ echo "
  --- Step 4 --- Block size -------------------------------------------
 "
 echo "\
-The default block size on the disk is $blockdefault KB. However, sizes of 1 to $blockdefault KB
-are also supported. If you have a small disk or small RAM you may want less
-than $blockdefault KB, in which case type a block size from 1 to 8 (1, 2, 4 or $blockdefault are
-suggested values). Otherwise hit ENTER for the default of $blockdefault KB blocks, which
-should be fine in most cases."
+The default block size on the disk is $blockdefault KB.
+If you have a small disk or small RAM you may want less
+than $blockdefault KB. Please type 1, 2, or 4 for a smaller
+block size (in KB), or hit ENTER for the default of 
+$blockdefault KB blocks, which should be fine in most cases."
 
 while [ -z "$blocksize" ]
 do	echo -n "Block size [$blockdefault KB]? "
@@ -250,8 +250,8 @@ do	echo -n "Block size [$blockdefault KB]? "
 	if [ -z "$blocksize" ]
 	then	blocksize=$blockdefault
 	fi
-	if [ $blocksize -gt $blockdefault -o $blocksize -lt 1 ]
-	then	echo "$blocksize bogus block size. 1-$blockdefault please."
+	if [ "$blocksize" -ne 1 -a "$blocksize" -ne 2 -a "$blocksize" -ne 4 -a "$blocksize" -ne $blockdefault ]
+	then	echo "$blocksize bogus block size. 1, 2, 4 or $blockdefault please."
 		blocksize=""
 	fi
 done
@@ -376,7 +376,7 @@ if [ -n "$driver" ]
 then	echo "eth0 $driver 0 { default; };" >/mnt/etc/inet.conf
 	echo "$driverargs" >$LOCALRC
 	disable=""
-else	disable=inet
+else	disable="disable=inet;"
 fi
 
 umount /dev/$root || exit		# Unmount the new root.
@@ -398,7 +398,7 @@ if [ $cache -eq 0 ]; then cache=; else cache="ramsize=$cache"; fi
 
 					# Make bootable.
 installboot -d /dev/$root /usr/mdec/bootblock /boot/boot >/dev/null || exit
-edparams /dev/$root "rootdev=$root; ramimagedev=$root; disable=$disable; $cache; main() { echo This is the MINIX 3 boot monitor.; echo MINIX will load in 5 seconds, or press ESC.; trap 5000 boot; menu; }; save" || exit
+edparams /dev/$root "rootdev=$root; ramimagedev=$root; $disable $cache; main() { echo This is the MINIX 3 boot monitor.; echo MINIX will load in 5 seconds, or press ESC.; trap 5000 boot; menu; }; save" || exit
 pfile="/usr/src/tools/fdbootparams"
 echo "Remembering boot parameters in ${pfile}."
 echo "rootdev=$root; ramimagedev=$root; $cache; save" >$pfile || exit
diff --git a/tools/release.sh b/tools/release.sh
index b6d35b7a8..dd0d1aca4 100755
--- a/tools/release.sh
+++ b/tools/release.sh
@@ -32,6 +32,7 @@ umount $TMPDISK
 umount $RAM
 
 ( cd .. && make clean )
+( cd .. && make depend )
 echo " * Cleanup old files"
 rm -rf $RELEASEDIR $ISO $IMAGE $ROOTIMAGE $ISOGZ $CDFILES
 mkdir -p $CDFILES || exit
@@ -67,7 +68,7 @@ make programs image
 (cd ../boot && make)
 make image || exit 1
 sh mkboot cdfdboot
-cp cdfdboot $CDFILES/bootflp.img
+cp $IMAGE $CDFILES/bootflp.img
 cp release/cd/* $CDFILES
 writeisofs -l MINIX -b $IMAGE $CDFILES $ISO || exit 1
 echo "Appending Minix root and usr filesystem"
diff --git a/tools/release/cd/README.TXT b/tools/release/cd/README.TXT
index 02b99c8ae..d51ac032c 100644
--- a/tools/release/cd/README.TXT
+++ b/tools/release/cd/README.TXT
@@ -8,6 +8,10 @@ harddisk with it. Its contents are not visible here.
 In this directory:
 	README.TXT: This file.
 	PRESZ134.ZIP: A tool to help resizing partitions.
+	BOOTFLP.IMG: If you can't boot from CD, write this image to a
+	             floppy and boot from it, while having the CD in a
+	             CD drive. The system on the floppy should find the
+	             CD and start up as if it had been booted from CD.
 
 For more information, new releases, other software and documentation
 about MINIX 3, please visit: