From: AceVest <zhaoyanbai@126.com>
Date: Sun, 17 Jun 2018 08:32:58 +0000 (+0800)
Subject: ...
X-Git-Url: http://zhaoyanbai.com/repos/man.named.html?a=commitdiff_plain;h=4de8c6c3a46f7222edb3e71e7972a6b1eb70fa41;p=acecode.git

...
---

diff --git a/arduino/hardware/ace/avr/cores/avr/AceAvr.h b/arduino/hardware/ace/avr/cores/avr/AceAvr.h
index 9e48440..38fb062 100644
--- a/arduino/hardware/ace/avr/cores/avr/AceAvr.h
+++ b/arduino/hardware/ace/avr/cores/avr/AceAvr.h
@@ -9,13 +9,30 @@
 
 #pragma once
 
+#include <stdint.h>
+#include <avr/pgmspace.h>
+
+#define LOW  0
+#define HIGH 1
+
+#define INPUT	        0
+#define OUTPUT	        1
+#define INPUT_PULLUP    2
+
+void delay(unsigned long ms);
+void acevest();
+
 // ATmega328P
 #define __SFR_OFFSET 0x20
 #define _MMIO_BYTE(mem_addr) (*(volatile uint8_t *)(mem_addr))
 #define _SFR_IO8(io_addr) _MMIO_BYTE((io_addr) + __SFR_OFFSET)
-#define SREG _SFR_IO8(0x3F)
-#define DDRB _SFR_IO8(0x04)
-#define PORTB _SFR_IO8(0x05)
+#define DDRB    _SFR_IO8(0x04)
+#define PORTB   _SFR_IO8(0x05)
+#define DDRC    _SFR_IO8(0x07)
+#define PORTC   _SFR_IO8(0x08)
+#define DDRD    _SFR_IO8(0x0A)
+#define PORTD   _SFR_IO8(0x0B)
+#define SREG    _SFR_IO8(0x3F)
 
 // F_CPU 定义在命令行中
 #ifndef F_CPU
@@ -26,3 +43,19 @@
 #define cli()  __asm__ __volatile__ ("cli" ::: "memory")
 #define sei()  __asm__ __volatile__ ("sei" ::: "memory")
 #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+
+
+const uint8_t PA = 1;
+const uint8_t PB = 2;
+const uint8_t PC = 3;
+const uint8_t PD = 4;
+
+
+uint8_t get_digital_pin_port(uint8_t pin);
+uint8_t get_digital_pin_bit_mask(uint8_t pin);
+volatile uint8_t* get_digital_pin_port_mode_register(uint8_t pin);
+volatile uint8_t* get_digital_pin_port_output_register(uint8_t pin);
+
+
+void set_digital_pin_mode(uint8_t pin, uint8_t mode);
+void digital_write(uint8_t pin, uint8_t val);
diff --git a/arduino/hardware/ace/avr/cores/avr/Arduino.h b/arduino/hardware/ace/avr/cores/avr/Arduino.h
index df4d362..f90c621 100644
--- a/arduino/hardware/ace/avr/cores/avr/Arduino.h
+++ b/arduino/hardware/ace/avr/cores/avr/Arduino.h
@@ -9,9 +9,5 @@
 
 #pragma once
 
-#include <stdint.h>
-#include <avr/pgmspace.h>
 #include <AceAvr.h>
 
-void delay(unsigned long ms);
-void acevest();
diff --git a/arduino/hardware/ace/avr/cores/avr/a.sh b/arduino/hardware/ace/avr/cores/avr/a.sh
new file mode 100755
index 0000000..1b4c2d8
--- /dev/null
+++ b/arduino/hardware/ace/avr/cores/avr/a.sh
@@ -0,0 +1,2 @@
+avr-gcc -g -O0 -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10804 -DARDUINO_ACE_AVR -DARDUINO_ARCH_AVR   "-I/Users/ace/workspace/Arduino/hardware/ace/avr/cores/avr" "-I/Users/ace/workspace/Arduino/hardware/ace/avr/variants/avr" "/Users/ace/workspace/Arduino/hardware/ace/avr/cores/avr/main.cpp" -o "main"
+avr-gcc -c -g -O0 -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10804 -DARDUINO_ACE_AVR -DARDUINO_ARCH_AVR   "-I/Users/ace/workspace/Arduino/hardware/ace/avr/cores/avr" "-I/Users/ace/workspace/Arduino/hardware/ace/avr/variants/avr" "/Users/ace/workspace/Arduino/hardware/ace/avr/cores/avr/main.cpp" -o "main.cpp.o"
diff --git a/arduino/hardware/ace/avr/cores/avr/avr.cpp b/arduino/hardware/ace/avr/cores/avr/avr.cpp
new file mode 100644
index 0000000..f61ed70
--- /dev/null
+++ b/arduino/hardware/ace/avr/cores/avr/avr.cpp
@@ -0,0 +1,83 @@
+#include <AceAvr.h>
+
+// On the board, digital pins are also used
+// for the analog output (software PWM).  Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA328P
+//
+//                  +-\/-+
+//            PC6  1|    |28  PC5 (AI 5) (D 19)
+//      (D 0) PD0  2|    |27  PC4 (AI 4) (D 18)
+//      (D 1) PD1  3|    |26  PC3 (AI 3) (D 17)
+//      (D 2) PD2  4|    |25  PC2 (AI 2) (D 16)
+// PWM+ (D 3) PD3  5|    |24  PC1 (AI 1) (D 15)
+//      (D 4) PD4  6|    |23  PC0 (AI 0) (D 14)
+//            VCC  7|    |22  GND
+//            GND  8|    |21  AREF
+//            PB6  9|    |20  AVCC
+//            PB7 10|    |19  PB5 (D 13)
+// PWM+ (D 5) PD5 11|    |18  PB4 (D 12)
+// PWM+ (D 6) PD6 12|    |17  PB3 (D 11) PWM
+//      (D 7) PD7 13|    |16  PB2 (D 10) PWM
+//      (D 8) PB0 14|    |15  PB1 (D 9)  PWM
+//                  +----+
+//
+// (PWM+ indicates the additional PWM pins on the ATmega168.)
+
+uint8_t get_digital_pin_port(uint8_t pin) {
+    if(pin < 8) {
+        return PD;
+    }
+
+    if(pin < 14) {
+        return PB;
+    }
+
+    return PC;
+}
+
+uint8_t get_digital_pin_bit_mask(uint8_t pin) {
+    uint8_t seg = 0;
+
+    switch(get_digital_pin_port(pin)) {
+    case PB:
+        seg = 8;
+        break;
+    case PC:
+        seg = 14;
+        break;
+    case PD:
+        seg = 0;
+        break;
+    }
+
+    return (1 << (pin - seg));
+}
+
+volatile uint8_t* get_digital_pin_port_mode_register(uint8_t pin) {
+    switch(get_digital_pin_port(pin)) {
+    case PB:
+        return &DDRB;
+    case PC:
+        return &DDRC;
+    case PD:
+        return &DDRD;
+    }
+
+    return 0;
+}
+
+
+volatile uint8_t* get_digital_pin_port_output_register(uint8_t pin) {
+    switch(get_digital_pin_port(pin)) {
+    case PB:
+        return &PORTB;
+    case PC:
+        return &PORTC;
+    case PD:
+        return &PORTC;
+    }
+
+    return 0;
+}
diff --git a/arduino/hardware/ace/avr/cores/avr/backup/code1 b/arduino/hardware/ace/avr/cores/avr/backup/code1
new file mode 100644
index 0000000..fbfd546
--- /dev/null
+++ b/arduino/hardware/ace/avr/cores/avr/backup/code1
@@ -0,0 +1,82 @@
+/*
+ * ------------------------------------------------------------------------
+ *   File Name: main.cpp
+ *      Author: Zhao Yanbai
+ *              2018-06-14 20:21:33 Thursday CST
+ * Description: none
+ * ------------------------------------------------------------------------
+ */
+#include <Arduino.h>
+
+
+#if 0
+volatile unsigned long timer0_overflow_count = 0;
+
+//extern "C" void TIMER0_OVF_vect() __attribute__ ((signal,used, externally_visible));
+//void TIMER0_OVF_vect()
+
+extern "C" void __vector_16() __attribute__ ((signal,used, externally_visible));
+void __vector_16()
+{
+    timer0_overflow_count++;
+}
+
+
+
+int main() {
+__asm__ __volatile__ ("sei" ::: "memory");
+__asm__ __volatile__ ("nop" ::: "memory");
+__asm__ __volatile__ ("nop" ::: "memory");
+        uint8_t oldSREG = SREG;
+		oldSREG = 0xAA;
+		SREG = oldSREG;
+		uint16_t x = (uint16_t)(&DDRB);
+		x++;
+__asm__ __volatile__ ("nop" ::: "memory");
+__asm__ __volatile__ ("nop" ::: "memory");
+__asm__ __volatile__ ("cli" ::: "memory");
+	
+	return 0;
+}
+#else
+
+void init_timer0();
+
+void init() {
+    sei();
+    init_timer0();
+}
+
+int main()
+{
+    init();
+
+    //uint8_t pin = 13;
+    uint8_t bit = 1<<4; // pin 13是 B组的第5个
+    volatile uint8_t *reg = ((volatile uint8_t *)((uint16_t)(&DDRB)));
+    volatile uint8_t *out = ((volatile uint8_t *)((uint16_t)(&PORTB)));
+
+    // set pin output
+    uint8_t oldSREG = SREG;
+    cli();
+    *reg |= bit;
+    SREG = oldSREG;
+
+    const int d = 1000;
+    int n = 0;
+
+    while(1) {
+        n++;
+
+        oldSREG = SREG;
+        cli();
+                        /* HIGH */      /* LOW */
+        n % 2 == 0 ? *out |= bit : *out &= ~bit;
+        SREG = oldSREG;
+
+        delay(d);
+    }
+
+    return 0;
+}
+#endif
diff --git a/arduino/hardware/ace/avr/cores/avr/lib.cpp b/arduino/hardware/ace/avr/cores/avr/lib.cpp
new file mode 100644
index 0000000..c2bd8dc
--- /dev/null
+++ b/arduino/hardware/ace/avr/cores/avr/lib.cpp
@@ -0,0 +1,46 @@
+/*
+ * ------------------------------------------------------------------------
+ *   File Name: lib.cpp
+ *      Author: Zhao Yanbai
+ *              2018-06-17 15:27:28 Sunday CST
+ * Description: none
+ * ------------------------------------------------------------------------
+ */
+#include <AceAvr.h>
+
+void set_digital_pin_mode(uint8_t pin, uint8_t mode) {
+    uint8_t bit_mask = get_digital_pin_bit_mask(pin);
+    volatile uint8_t *mod_reg = get_digital_pin_port_mode_register(pin);
+    volatile uint8_t *out_reg = get_digital_pin_port_output_register(pin);
+
+    if(0 == mod_reg || 0 == out_reg) return;
+
+    uint8_t oldSREG = SREG;
+    cli();
+
+    switch(mode) {
+    case INPUT:
+        *mod_reg &= ~bit_mask;
+        *out_reg &= ~bit_mask;
+        break;
+    case INPUT_PULLUP:
+        *mod_reg &= ~bit_mask;
+        *out_reg |= ~bit_mask;
+        break;
+    case OUTPUT:
+        *mod_reg |= bit_mask;
+        break;
+    }
+
+    SREG = oldSREG;
+}
+
+void digital_write(uint8_t pin, uint8_t val) {
+    uint8_t bit_mask = get_digital_pin_bit_mask(pin);
+    volatile uint8_t *out_reg = get_digital_pin_port_output_register(pin);
+
+    uint8_t oldSREG = SREG;
+    cli();
+    val == LOW ? *out_reg &= ~bit_mask : *out_reg |= bit_mask;
+    SREG = oldSREG;
+}
diff --git a/arduino/hardware/ace/avr/cores/avr/main b/arduino/hardware/ace/avr/cores/avr/main
new file mode 100755
index 0000000..0327266
Binary files /dev/null and b/arduino/hardware/ace/avr/cores/avr/main differ
diff --git a/arduino/hardware/ace/avr/cores/avr/main.cpp b/arduino/hardware/ace/avr/cores/avr/main.cpp
index d402d78..6892650 100644
--- a/arduino/hardware/ace/avr/cores/avr/main.cpp
+++ b/arduino/hardware/ace/avr/cores/avr/main.cpp
@@ -6,44 +6,37 @@
  * Description: none
  * ------------------------------------------------------------------------
  */
-#include <Arduino.h>
-
 
+#include <Arduino.h>
 void init_timer0();
+void init_timer1();
 
 void init() {
     sei();
     init_timer0();
+    init_timer1();
 }
 
+extern uint8_t tick;
 int main()
 {
     init();
 
-    //uint8_t pin = 13;
-    uint8_t bit = 1<<5; // pin 13是 B组的第5个
-    volatile uint8_t *reg = ((volatile uint8_t *)((uint16_t)(&DDRB)));
-    volatile uint8_t *out = ((volatile uint8_t *)((uint16_t)(&PORTB)));
+    uint8_t pin = 12;
+    set_digital_pin_mode(pin, OUTPUT);
 
-    // set pin output
-    uint8_t oldSREG = SREG;
-    cli();
-    *reg |= bit;
-    SREG = oldSREG;
-
-    const int d = 1000;
     int n = 0;
-
+    uint8_t state = LOW;
     while(1) {
         n++;
 
-        oldSREG = SREG;
-        cli();
-                        /* HIGH */      /* LOW */
-        n % 2 == 0 ? *out |= bit : *out &= ~bit;
-        SREG = oldSREG;
+        if(tick > 100) {
+            state = state == LOW ? HIGH : LOW;
+            tick = 0;
+        }
 
-        delay(d);
+        digital_write(pin, state);
+        delay(10);
     }
 
     return 0;
diff --git a/arduino/hardware/ace/avr/cores/avr/main.cpp.d b/arduino/hardware/ace/avr/cores/avr/main.cpp.d
new file mode 100644
index 0000000..ded7b7e
--- /dev/null
+++ b/arduino/hardware/ace/avr/cores/avr/main.cpp.d
@@ -0,0 +1,4 @@
+main.cpp.o: \
+ /Users/ace/workspace/Arduino/hardware/ace/avr/cores/avr/main.cpp \
+ /Users/ace/workspace/Arduino/hardware/ace/avr/cores/avr/Arduino.h \
+ /Users/ace/workspace/Arduino/hardware/ace/avr/cores/avr/AceAvr.h
diff --git a/arduino/hardware/ace/avr/cores/avr/main.d b/arduino/hardware/ace/avr/cores/avr/main.d
new file mode 100644
index 0000000..cade3be
--- /dev/null
+++ b/arduino/hardware/ace/avr/cores/avr/main.d
@@ -0,0 +1,3 @@
+main: /Users/ace/workspace/Arduino/hardware/ace/avr/cores/avr/main.cpp \
+ /Users/ace/workspace/Arduino/hardware/ace/avr/cores/avr/Arduino.h \
+ /Users/ace/workspace/Arduino/hardware/ace/avr/cores/avr/AceAvr.h
diff --git a/arduino/hardware/ace/avr/cores/avr/timer.cpp b/arduino/hardware/ace/avr/cores/avr/timer.cpp
index f88e153..9a3092c 100644
--- a/arduino/hardware/ace/avr/cores/avr/timer.cpp
+++ b/arduino/hardware/ace/avr/cores/avr/timer.cpp
@@ -9,13 +9,8 @@
 
 #include<Arduino.h>
 
-extern "C" void TIMER0_OVF_vect() __attribute__ ((signal,used, externally_visible));
-volatile unsigned long timer0_overflow_count = 0;
-void TIMER0_OVF_vect()
-{
-    timer0_overflow_count++;
-}
 
+volatile unsigned long timer0_overflow_count = 0;
 #if 0
 static void __empty() {
     // Empty
@@ -69,3 +64,35 @@ void init_timer0() {
     // enable timer 0 overflow interrupt
     sbi(TIMSK0, TOIE0);
 }
+
+
+
+
+void init_timer1() {
+  //set timer1 interrupt at 100Hz
+  TCCR1A = 0;// set entire TCCR1A register to 0
+  TCCR1B = 0;// same for TCCR1B
+  TCNT1  = 0;//initialize counter value to 0
+  // set compare match register for 100Hz increments
+  OCR1A = 155; // = (16*10^6) / (1024*100Hz) - 1 (must be <65536)
+  // turn on CTC mode
+  TCCR1B |= (1 << WGM12);
+  // Set CS10 and CS12 bits for 1024 prescaler
+  TCCR1B |= (1 << CS12) | (1 << CS10);  
+  // enable timer compare interrupt
+  TIMSK1 |= (1 << OCIE1A);
+}
+
+extern "C" void TIMER0_OVF_vect() __attribute__ ((signal,used, externally_visible));
+void TIMER0_OVF_vect()
+{
+    timer0_overflow_count++;
+}
+
+
+extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal,used, externally_visible));
+uint8_t tick = 0;
+void TIMER1_COMPA_vect()
+{
+    tick++;
+}
diff --git a/documents/ATmega328P.md b/documents/ATmega328P.md
new file mode 100644
index 0000000..1ff4eef
--- /dev/null
+++ b/documents/ATmega328P.md
@@ -0,0 +1,67 @@
+# ATmega328P
+
+
+## 中断
+### 中断向量表
+|Vector| No Program Address| Source Interrupts| definition|
+|:-:|---|---|:--|
+|0| 0x0000| RESET| External Pin, Power-on Reset, Brown-out Reset and Watchdog System Reset|
+|1| 0x0002| INT0| External Interrupt Request 0|
+|2| 0x0004| INT1| External Interrupt Request 1|
+|3| 0x0006| PCINT0| Pin Change Interrupt Request 0|
+|4| 0x0008| PCINT1| Pin Change Interrupt Request 1|
+|5| 0x000A| PCINT2| Pin Change Interrupt Request 2|
+|6| 0x000C| WDT| Watchdog Time-out Interrupt|
+|7| 0x000E| TIMER2_COMPA| Timer/Counter2 Compare Match A|
+|8| 0x0010| TIMER2_COMPB| Timer/Coutner2 Compare Match B|
+|9| 0x0012| TIMER2_OVF| Timer/Counter2 Overflow|
+|10| 0x0014| TIMER1_CAPT| Timer/Counter1 Capture Event|
+|11| 0x0016| TIMER1_COMPA| Timer/Counter1 Compare Match A|
+|12| 0x0018| TIMER1_COMPB| Timer/Coutner1 Compare Match B|
+|13| 0x001A| TIMER1_OVF| Timer/Counter1 Overflow|
+|14| 0x001C| TIMER0_COMPA| Timer/Counter0 Compare Match A|
+|15| 0x001E| TIMER0_COMPB| Timer/Coutner0 Compare Match B|
+|16| 0x0020| TIMER0_OVF| Timer/Counter0 Overflow|
+|17| 0x0022| SPI STC| SPI Serial Transfer Complete|
+|18| 0x0024| USART_RX| USART Rx Complete|
+|19| 0x0026| USART_UDRE| USART Data Register Empty|
+|20| 0x0028| USART_TX| USART Tx Complete|
+|21| 0x002A| ADC| ADC Conversion Complete|
+|22| 0x002C| EE READY| EEPROM Ready|
+|23| 0x002E| ANALOG COMP| Analog Comparator|
+|24| 0x0030| TWI| 2-wire Serial Interface (I2C)|
+|25| 0x0032| SPM| READY Store Program Memory Ready|
+
+上表中的地址是按16bit算的
+
+编写对应的中断程序，以`TIMER1_OVF`举例，按如下格式
+
+```
+extern "C" void __vector_16() __attribute__ ((signal,used, externally_visible));
+void __vector_16()
+{
+	// ...
+}
+```
+
+### 中断向量表所在位置
+|BOOTRST| IVSEL| Reset Address| Interrupt Vectors Start Address|
+|---|---|---|:--|
+|1| 0| 0x000| 0x002|
+|1| 1| 0x000| Boot Reset Address + 0x0002|
+|0| 0| Boot Reset Address| 0x002|
+|0| 1| Boot Reset Address| Boot Reset Address + 0x0002|
+
+* BOOTRST是fuse.high_byte.BOOTRST比特们，1表示unprogramed，reset时从地址0开始，0表示programed，reset时从地址`Boot Reset Address`开始
+* 地址`Boot Reset Address`与BOOTSZ即fuse.hih_byte[2:1]相关
+* IVSEL是MCUCR寄存器的第1个bit
+
+### 外部中断
+* 如果启用中断，就算将INT、PCINT引脚配置成`OUTPUT`也会触发中断
+### PCINT和INT引脚的差别
+* INT限制在了两个端口上面，而PCINT则是所有接口都具备。
+* INT具有上沿，下沿，低电平，高电平触发这几种模式，而PCINT只有测量电平的变化这一个模式。
+* INT可以了解具体是哪个口触发的，而PCINT不行。
+* PCINT不会直接跳转入指定的程序，用户需要读取寄存器来做判断是哪个PCINT端口产生了变化。
+* INT0和INT1各自可配置一个中断程序入口，而所有的PCINT都只会触发跳转进入一条指定的程序。
+
diff --git a/learn/doc/mac_bash_profile b/learn/doc/mac_bash_profile
index 295697b..a6103c2 100644
--- a/learn/doc/mac_bash_profile
+++ b/learn/doc/mac_bash_profile
@@ -5,9 +5,11 @@ HISTCONTROL=ignoreboth
 #export PATH="$(brew --prefix homebrew/php/php56)/bin:$PATH"
 export PATH=/usr/local/sbin:$PATH
 export PATH=/Users/Ace/.local/bin:$PATH
+export PATH=$PATH:$HOME/esp/xtensa-esp32-elf/bin
 export GOBIN=/Users/Ace/.local/bin
-export PATH=/Users/Ace/workspace/github/metasploit-framework:$PATH
-export MSF_DATABASE_CONFIG=/Users/Ace/workspace/github/metasploit-framework/config/database.yml
+export IDF_PATH=$HOME/esp/esp-idf
+export PATH=$PATH:/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/
+export PATH=$PATH:$HOME/Library/Arduino15/packages/arduino/tools/avrdude/6.0.1-arduino5/bin
 #多个GOPATH用';'分隔 go get会存到第一个目录
 export GOPATH=/Users/Ace/go
 export PS1="\W\$ "
diff --git a/learn/doc/vimrc b/learn/doc/vimrc
index cf110be..72f9f27 100644
--- a/learn/doc/vimrc
+++ b/learn/doc/vimrc
@@ -99,6 +99,8 @@ autocmd FileType php,python,h,c,java,perl,shell,bash,vim,ruby,cc,cpp set ai
 autocmd FileType php,python,h,c,java,perl,shell,bash,vim,ruby,cc,cpp set sw=4
 autocmd FileType php,python,h,c,java,perl,shell,bash,vim,ruby,cc,cpp set ts=4
 autocmd FileType php,python,h,c,java,perl,shell,bash,vim,ruby,cc,cpp set sts=4
+autocmd FileType php,python,h,c,java,perl,shell,bash,vim,ruby,cc,cpp set expandtab
+
 
 "golang默认使用TAB
 "autocmd FileType go set ai
diff --git a/tools/hzk16/HZK16C b/tools/hzk16/HZK16C
new file mode 100755
index 0000000..65b02a9
Binary files /dev/null and b/tools/hzk16/HZK16C differ
diff --git a/tools/hzk16/HZK16X b/tools/hzk16/HZK16X
new file mode 100755
index 0000000..68144b0
Binary files /dev/null and b/tools/hzk16/HZK16X differ
diff --git a/tools/hzk16/hz_16x16_c_code_maker.py b/tools/hzk16/hz_16x16_c_code_maker.py
new file mode 100755
index 0000000..165e05e
--- /dev/null
+++ b/tools/hzk16/hz_16x16_c_code_maker.py
@@ -0,0 +1,137 @@
+#!/usr/bin/python
+#encoding: utf-8
+import sys
+import binascii
+
+RECT_HEIGHT = 16
+RECT_WIDTH = 16
+BYTE_COUNT_PER_ROW = RECT_WIDTH / 8
+BYTE_COUNT_PER_FONT = BYTE_COUNT_PER_ROW * RECT_HEIGHT
+
+KEYS = [0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01]
+
+class FontRender(object):
+    def __init__(self, font_file,
+                 rect_height=RECT_HEIGHT, rect_width=RECT_WIDTH, byte_count_per_row=BYTE_COUNT_PER_ROW):
+        self.font_file = font_file
+        self.rect_height = rect_height
+        self.rect_width = rect_width
+        self.byte_count_per_row = byte_count_per_row
+
+        self.__init_rect_list__()
+
+        self.c_code_list = []
+
+    def __init_rect_list__(self):
+        self.rect_list = [] * RECT_HEIGHT
+
+        for i in range(RECT_HEIGHT):
+            self.rect_list.append([] * RECT_WIDTH)
+
+    def get_font_area_index(self, txt, encoding='utf-8'):
+        if not isinstance(txt, unicode):
+            txt = txt.decode(encoding)
+
+        gb2312 = txt.encode('gb2312')
+        hex_str = binascii.b2a_hex(gb2312)
+
+        area = eval('0x' + hex_str[:2]) - 0xA0
+        index = eval('0x' + hex_str[2:]) - 0xA0
+
+        return area, index
+
+    def get_font_rect(self, area, index):
+        offset = (94 * (area-1) + (index-1)) * BYTE_COUNT_PER_FONT
+        btxt = None
+
+        with open(self.font_file, "rb") as f:
+            f.seek(offset)
+            btxt = f.read(BYTE_COUNT_PER_FONT)
+
+        return btxt
+
+    def convert_font_rect(self, font_rect):
+        for k in range(len(font_rect) / self.byte_count_per_row):
+            row_list = self.rect_list[k]
+            for j in range(self.byte_count_per_row):
+                for i in range(8):
+                    asc = binascii.b2a_hex(font_rect[k * self.byte_count_per_row + j])
+                    asc = eval('0x' + asc)
+                    flag = asc & KEYS[i]
+                    row_list.append(flag)
+
+    def make_c_code(self, font_rect, ch) :
+        c_code_str = '\n    // {0}\n'.format(ch)
+        c_code_str += '    {'
+        for k in range(len(font_rect) / self.byte_count_per_row):
+            row_list = self.rect_list[k]
+            for j in range(self.byte_count_per_row):
+                data = 0
+                for i in range(8):
+                    asc = binascii.b2a_hex(font_rect[k * self.byte_count_per_row + j])
+                    asc = eval('0x' + asc)
+                    flag = asc & KEYS[i]
+                    data <<= 1
+                    if flag != 0 :
+                        data |= 1
+
+                if k != 0 or j != 0 :
+                    c_code_str= c_code_str + ','
+                c_code_str= c_code_str + str(hex(data))
+
+
+        c_code_str += '}'
+        self.c_code_list.append(c_code_str)
+
+
+
+    def render_font_rect(self, rect_list=None):
+        if not rect_list:
+            rect_list = self.rect_list
+
+        for row in rect_list:
+            for i in row:
+                if i:
+                    print '■',
+                else:
+                    print '○',
+            print
+
+    def print_c_code(self) :
+        s = 'const uint8_t PROGMEM chinese_str[][{0}] = '.format(BYTE_COUNT_PER_FONT)
+        s += '{'
+        for i in range(0, len(self.c_code_list)) :
+            if i != 0 :
+                s += ','
+            s += self.c_code_list[i]
+
+        s += '\n};'
+
+        print(s)
+
+
+    def convert(self, text, encoding='utf-8'):
+        if not isinstance(text, unicode):
+            text = text.decode(encoding)
+
+        for t in text:
+            area, index = self.get_font_area_index(t)
+            font_rect = self.get_font_rect(area, index)
+
+            self.make_c_code(font_rect, t.encode(encoding))
+            self.convert_font_rect(font_rect)
+
+    def get_rect_info(self):
+        return self.rect_list
+
+if '__main__' == __name__:
+    text = u''
+    if len(sys.argv) != 2 :
+        print("Usage:\n    {0} <string>".format(sys.argv[0]))
+    text = sys.argv[1]
+    fr = FontRender('./hzk16s')
+    fr.convert(text)
+    # print fr.get_rect_info()
+    # fr.render_font_rect()
+    fr.print_c_code()
+
diff --git a/tools/hzk16/hzk16f b/tools/hzk16/hzk16f
new file mode 100755
index 0000000..eff886f
Binary files /dev/null and b/tools/hzk16/hzk16f differ
diff --git a/tools/hzk16/hzk16h b/tools/hzk16/hzk16h
new file mode 100755
index 0000000..fd430f8
Binary files /dev/null and b/tools/hzk16/hzk16h differ
diff --git a/tools/hzk16/hzk16k b/tools/hzk16/hzk16k
new file mode 100755
index 0000000..d509911
Binary files /dev/null and b/tools/hzk16/hzk16k differ
diff --git a/tools/hzk16/hzk16l b/tools/hzk16/hzk16l
new file mode 100755
index 0000000..be8cf18
Binary files /dev/null and b/tools/hzk16/hzk16l differ
diff --git a/tools/hzk16/hzk16s b/tools/hzk16/hzk16s
new file mode 100755
index 0000000..410af8a
Binary files /dev/null and b/tools/hzk16/hzk16s differ
diff --git a/tools/hzk16/hzk16v b/tools/hzk16/hzk16v
new file mode 100755
index 0000000..47ef6bb
Binary files /dev/null and b/tools/hzk16/hzk16v differ
diff --git a/tools/hzk16/hzk16y b/tools/hzk16/hzk16y
new file mode 100755
index 0000000..723f878
Binary files /dev/null and b/tools/hzk16/hzk16y differ
diff --git a/tools/hzk16/readme.txt b/tools/hzk16/readme.txt
new file mode 100644
index 0000000..aee5b7b
--- /dev/null
+++ b/tools/hzk16/readme.txt
@@ -0,0 +1,22 @@
+hzk16所有字体　下面是在WINDOWS下面生成的不同字体风格的HZK16：
+宋　　－－HZK16S
+仿　　－－HZK16F
+黑　　－－HZK16H
+楷　　－－HZK16K 仿与楷字型相近而风格仍有差别 
+幼圆　－－HZK16Y
+隶　　－－HZK16L 效果较差 
+
+另三个是DOS下汉字系统的字库：
+粗　　－－HZK16C
+细　　－－HZK16X 类XZL字体 
+繁　　－－HZK16V
+
+附件1中是宋仿黑楷幼圆5种字库 附件2中是粗细繁隶4种 ">hzk16所有字体　下面是在WINDOWS下面生成的不同字体风格的HZK16：
+宋　　－－HZK16S
+仿　　－－HZK16F
+黑　　－－HZK16H
+楷　　－－HZK16K 仿与楷字型相近而风格仍有差别 
+幼圆　－－HZK16Y
+隶　　－－HZK16L 效果较差 
+
+另三个是DOS下汉字  [更多]