From: Jorrit Herder Date: Fri, 12 Aug 2005 11:08:23 +0000 (+0000) Subject: *** empty log message *** X-Git-Tag: v3.1.0~359 X-Git-Url: http://zhaoyanbai.com/repos/jquery-3.1.1.min.js?a=commitdiff_plain;h=fb2fc31f8eaf4aabd632bfbf0cbc5063d15fe73b;p=minix.git *** empty log message *** --- diff --git a/commands/scripts/setup.sh b/commands/scripts/setup.sh index bf19d68e2..22c88da45 100755 --- a/commands/scripts/setup.sh +++ b/commands/scripts/setup.sh @@ -1,13 +1,19 @@ #!/bin/sh # -# setup 4.1 - install a MINIX distribution Author: Kees J. Bot -# 20 Dec 1994 +# setup 4.1 - install a MINIX distribution +# +# Changes: +# Aug 2005 robustness checks and beautifications (Jorrit N. Herder) +# Jul 2005 extended with autopart and networking (Ben J. Gras) +# Dec 20, 1994 created (Kees J. Bot) +# LOCALRC=/usr/etc/rc.local PATH=/bin:/usr/bin export PATH + usage() { cat >&2 <<'EOF' @@ -24,6 +30,11 @@ EOF exit 1 } +warn() +{ + echo -e "\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b ! $1" +} + # No options. while getopts '' opt; do usage; done shift `expr $OPTIND - 1` @@ -63,45 +74,59 @@ case $thisroot:$fdusr in esac echo -n " -Welcome to the MINIX installation script. +Welcome to the MINIX setup script. This script will guide you in setting up +MINIX on your machine. Please consult the manual for detailed instructions. Note 1: If the screen blanks, hit CTRL+F3 to select \"software scrolling\". -Note 2: If things go wrong then hit CTRL+C and start over. +Note 2: If things go wrong then hit CTRL+C to abort and start over. Note 3: Default answers, like [y], can simply be chosen by hitting ENTER. Note 4: If you see a colon (:) then you should hit ENTER to continue. :" read ret +# begin Step 1 echo "" echo " --- Step 1: Select keyboard type --------------------------------------" echo "" -echo "What type of keyboard do you have? You can choose one of:" -echo "" -ls -C /usr/lib/keymaps | sed -e 's/\.map//g' -e 's/^/ /' -echo -n " -Keyboard type? [us-std] "; read keymap -test -n "$keymap" && loadkeys "/usr/lib/keymaps/$keymap.map" -ok="" -while [ "$ok" = "" ] + echo "What type of keyboard do you have? You can choose one of:" + echo "" + ls -C /usr/lib/keymaps | sed -e 's/\.map//g' -e 's/^/ /' + echo "" +step1="" +while [ "$step1" != ok ] +do + echo -n "Keyboard type? [us-std] "; read keymap + test -n "$keymap" || keymap=us-std + if loadkeys "/usr/lib/keymaps/$keymap.map" 2>/dev/null + then step1=ok + else warn "invalid keyboard" + fi +done +# end Step 1 + + +# begin Step 2 +step2="" +while [ "$step2" != ok ] do echo "" echo " --- Step 2: Create a partition for MINIX 3 ----------------------------" echo "" - echo "Now you need to create a MINIX 3 partition on your hard disk." - echo "Unless you are an expert, you are advised to use the automated" - echo "step-by-step help in setting up." - echo "" - echo -n "Do you want to use (A)utomatic or the e(X)pert mode? [A] " - read ch - case "$ch" in - [Aa]*) auto="1"; ok="yes"; ;; - '') auto="1"; ok="yes"; ;; - [Xx]*) auto=""; ok="yes"; ;; - *) echo "Unrecognized response."; ok=""; ;; - esac -done + echo "Now you need to create a MINIX 3 partition on your hard disk." + echo "Unless you are an expert, you are advised to use the automated" + echo "step-by-step help in setting up." + echo "" + ok="" + while [ "$ok" = "" ] + do + echo -n "Press ENTER for automatic mode or type 'expert': " + read mode + if [ -z "$mode" ]; then auto="1"; ok="yes"; fi + if [ "$mode" = expert ]; then auto=""; ok="yes"; fi + if [ "$ok" != yes ]; then warn "try again"; fi + done primary= @@ -133,21 +158,24 @@ make. (See the devices section in usage(8) on MINIX device names.) Please finish the name of the primary partition you have created: (Just type ENTER if you want to rerun \"part\") /dev/" read primary +done echo "" echo "This is the point of no return. You have selected to install MINIX" echo "on partition /dev/$primary. Please confirm that you want to use this" echo "selection to install MINIX." echo "" -while [ -z "$confirmation" -o "$confirmation" != yes ] - do - echo -n "Are you sure you want to continue? Please enter 'yes' or 'no':" - read confirmation - done +confirmation="" +while [ -z "$confirmation" -o "$confirmation" != yes -a "$confirmation" != no ] +do +echo -n "Are you sure you want to continue? Please enter 'yes' or 'no': " +read confirmation +if [ "$confirmation" = yes ]; then step2=ok; fi done + else # Automatic mode - while [ -z "$primary" ] - do +# while [ -z "$primary" ] +# do PF="/tmp/pf" if autopart -f$PF then if [ -s "$PF" ] @@ -166,10 +194,15 @@ else # reset at retries and timeouts in case autopart left # them messy atnormalize - done +# done + + if [ -n "$primary" ]; then step2=ok; fi fi +done +# end Step 2 + root=${primary}s0 swap=${primary}s1 usr=${primary}s2 @@ -191,43 +224,52 @@ hex2int() echo $i } +# begin Step 3 echo "" echo " --- Step 3: Select your Ethernet chip ---------------------------------" echo "" # Ask user about networking echo "MINIX currently supports the following Ethernet cards. Please choose: " -echo "" -echo "0. No Ethernet card (no networking)" -echo "1. Intel Pro/100" -echo "2. Realtek 8139 based card" -echo "3. Realtek 8029 based card (emulated by Qemu)" -echo "4. NE2000, 3com 503 or WD based card (emulated by Bochs)" -echo "5. 3Com 501 or 3Com 509 based card" -echo "6. Different Ethernet card (no networking)" -echo "" -echo "With some cards, you'll have to edit $LOCALRC after installing." -echo "" -echo "You can always change your mind after the install." -echo "" -echo -n "Choice? [0] " -read eth -driver="" -driverargs="" -config_warn=" -Note: After installing, edit $LOCALRC to the right configuration. -If you chose option 4, the defaults for emulation by Bochs have been set." -case "$eth" in - 1) driver=fxp; ;; - 2) driver=rtl8139; ;; - 3) driver=dp8390; driverargs="dp8390_arg='DPETH0=pci'"; ;; - 4) driver=dp8390; driverargs="dp8390_arg='DPETH0=240:9'"; - echo "$config_warn"; + echo "" + echo "0. No Ethernet card (no networking)" + echo "1. Intel Pro/100" + echo "2. Realtek 8139 based card" + echo "3. Realtek 8029 based card (emulated by Qemu)" + echo "4. NE2000, 3com 503 or WD based card (emulated by Bochs)" + echo "5. 3Com 501 or 3Com 509 based card" + echo "6. Different Ethernet card (no networking)" + echo "" + echo "You can always change your mind after the setup." + echo "" +step3="" +while [ "$step3" != ok ] +do + eth="" + echo -n "Ethernet card? [0] "; read eth + test -z $eth && eth=0 + driver="" + driverargs="" + case "$eth" in + 0) step3="ok"; ;; + 1) step3="ok"; driver=fxp; ;; + 2) step3="ok"; driver=rtl8139; ;; + 3) step3="ok"; driver=dp8390; driverargs="dp8390_arg='DPETH0=pci'"; ;; + 4) step3="ok"; driver=dp8390; driverargs="dp8390_arg='DPETH0=240:9'"; + echo "" + echo "Note: After installing, edit $LOCALRC to the right configuration." + echo " chose option 4, the defaults for emulation by Bochs have been set." ;; - 5) driver=dpeth; driverargs="#dpeth_arg='DPETH0=port:irq:memory'"; - echo "$config_warn"; + 5) step3="ok"; driver=dpeth; driverargs="#dpeth_arg='DPETH0=port:irq:memory'"; + echo "" + echo "Note: After installing, edit $LOCALRC to the right configuration." ;; -esac + 6) step3="ok"; ;; + *) warn "choose a number" + esac +done +# end Step 3 + # Compute the amount of memory available to MINIX. memsize=0 @@ -243,13 +285,13 @@ do done # Compute an advised swap size. -swapadv=0 -case `arch` in -i86) - test $memsize -lt 4096 && swapadv=$(expr 4096 - $memsize) - ;; -*) test $memsize -lt 6144 && swapadv=$(expr 6144 - $memsize) -esac +# swapadv=0 +# case `arch` in +# i86) +# test $memsize -lt 4096 && swapadv=$(expr 4096 - $memsize) +# ;; +# *) test $memsize -lt 6144 && swapadv=$(expr 6144 - $memsize) +# esac blockdefault=4 @@ -262,41 +304,39 @@ echo "For a small disk or small RAM you may want 1 or 2 KB blocks." echo "" while [ -z "$blocksize" ] -do echo -n "Block size in kilobytes? [$blockdefault] " - read blocksize - if [ -z "$blocksize" ] - then blocksize=$blockdefault - fi +do + echo -n "Block size in kilobytes? [$blockdefault] "; read blocksize + test -z "$blocksize" && blocksize=$blockdefault if [ "$blocksize" -ne 1 -a "$blocksize" -ne 2 -a "$blocksize" -ne $blockdefault ] - then echo "$blocksize KB is a bogus block size; 1, 2 or $blockdefault KB please." + then + warn "1, 2 or 4 please" blocksize="" fi done blocksizebytes="`expr $blocksize '*' 1024`" -echo "" -echo " --- Step 5: Allocate swap space ---------------------------------------" -echo "" -echo -n "How much swap space would you like? Swapspace is only needed if this -system is memory starved. If you have 128 MB of memory or more, you -probably don't need it. If you have less and want to run many programs -at once, I suggest setting it to the memory size. +# begin Step 5 +# echo "" +# echo " --- Step 5: Allocate swap space ---------------------------------------" +# echo "" -Size in kilobytes? [$swapadv] " - -swapsize= -read swapsize -test -z "$swapsize" && swapsize=$swapadv +# echo -n "How much swap space would you like? Swapspace is only needed if this +# system is memory starved. If you have 128 MB of memory or more, you +# probably don't need it. If you have less and want to run many programs +# at once, I suggest setting it to the memory size. +# Size in kilobytes? [$swapadv] " +# read swapsize +# test -z "$swapsize" && swapsize=$swapadv +# echo " You have selected to install MINIX in the partition /dev/$primary. The following subpartitions are about to be created on /dev/$primary: Root subpartition: /dev/$root 16 MB - Swap subpartition: /dev/$swap $swapsize KB /usr subpartition: /dev/$usr rest of $primary " # Secondary master bootstrap. @@ -304,33 +344,38 @@ installboot -m /dev/$primary /usr/mdec/masterboot >/dev/null || exit # Partition the primary. p3=0:0 -test "$swapsize" -gt 0 && p3=81:`expr $swapsize \* 2` +# test "$swapsize" -gt 0 && p3=81:`expr $swapsize \* 2` partition /dev/$primary 1 81:32768* $p3 81:0+ > /dev/null || exit -if [ "$swapsize" -gt 0 ] -then - # We must have that swap, now! - mkswap -f /dev/$swap || exit - mount -s /dev/$swap || exit -else - # Forget about swap. - swap= -fi +# if [ "$swapsize" -gt 0 ] +# then +# # We must have that swap, now! +# mkswap -f /dev/$swap || exit +# mount -s /dev/$swap || exit +# else +# # Forget about swap. +# swap= +# fi echo "" -echo " --- Step 6: Wait for bad block detection ------------------------------" +echo " --- Step 5: Wait for bad block detection ------------------------------" echo "" +echo "Scanning disk for bad blocks. Hit CTRL-C to stop the scan if you are" +echo "sure that there can not be any bad blocks. Otherwise just wait." -mkfs -B $blocksizebytes /dev/$usr -echo "Scanning /dev/$usr for bad blocks. (Hit CTRL+C to stop the scan if you are" -echo "absolutely sure that there can not be any bad blocks. Otherwise just wait.)" +trap ': nothing;echo' 2 echo "" -trap ': nothing' 2 +echo "Scanning /dev/$root for bad blocks:" +mkfs -B $blocksizebytes /dev/$root || exit +readall -b /dev/$root | sh +echo "" +echo "Scanning /dev/$usr for bad blocks:" +mkfs -B $blocksizebytes /dev/$usr || exit readall -b /dev/$usr | sh trap 2 echo "" -echo " --- Step 7: Wait for files to be copied -------------------------------" +echo " --- Step 6: Wait for files to be copied -------------------------------" echo "" mount /dev/$usr /mnt || exit # Mount the intended /usr. @@ -371,10 +416,6 @@ echo " Copying $fdroot to /dev/$root " -mkfs -B $blocksizebytes /dev/$root || exit -echo "Scanning /dev/$root for bad blocks. (Hit CTRL+C to stop the scan if you are" -echo "absolutely sure that there can not be any bad blocks. Otherwise just wait.)" -readall -b /dev/$root | sh mount /dev/$root /mnt || exit # Running from the installation CD. files="`find / -xdev | wc -l`" @@ -383,12 +424,12 @@ chmod 555 /mnt/usr # CD remnants that aren't for the installed system rm /mnt/etc/issue /mnt/CD 2>/dev/null - # Change /etc/fstab. + # Change /etc/fstab. (No swap.) + # ${swap:+swap=/dev/$swap} echo >/mnt/etc/fstab "\ # Poor man's File System Table. root=/dev/$root -${swap:+swap=/dev/$swap} usr=/dev/$usr" # National keyboard map. @@ -428,10 +469,13 @@ echo "rootdev=$root; ramimagedev=$root; $cache; save" >$pfile || exit sync echo " -Please type 'shutdown' to exit MINIX 3 and enter the boot monitor. -At the boot monitor prompt, you can type 'boot $primary' to try the -newly installed MINIX system. +Please type 'shutdown' to exit MINIX 3 and enter the boot monitor. At the +boot monitor prompt, type 'boot $primary' to try your new MINIX system. + +This ends the MINIX setup script. After booting your newly set up system, +you can run the test suites as indicated in the setup manual. You also +may want to take care of local configuration, such as securing your system +with a password. Please consult the usage manual for more information. -See Part IV: Testing in the usage manual. "