From: Philip Homburg <philip@cs.vu.nl>
Date: Fri, 5 Aug 2005 18:37:15 +0000 (+0000)
Subject: Temp hacks for QEMU. Call to env_setargs in dpeth.
X-Git-Tag: v3.1.0~414
X-Git-Url: http://zhaoyanbai.com/repos/jquery-3.1.1.min.js?a=commitdiff_plain;h=cfd27c36cb213736f76422126c75dfd70abf79fd;p=minix.git

Temp hacks for QEMU. Call to env_setargs in dpeth.
---

diff --git a/drivers/dp8390/rtl8029.c b/drivers/dp8390/rtl8029.c
index bb76b2f2d..631f63d87 100644
--- a/drivers/dp8390/rtl8029.c
+++ b/drivers/dp8390/rtl8029.c
@@ -120,7 +120,11 @@ struct dpeth *dep;
 	/* printf("cr = 0x%x\n", pci_attr_r16(devind, PCI_CR)); */
 	bar= pci_attr_r32(devind, PCI_BAR) & 0xffffffe0;
 	if ((bar & 0x3ff) >= 0x100-32 || bar < 0x400)
-		panic("", "base address is not properly configured", NO_NUM);
+	{
+		printf("rtl8029: ignoring bad base address 0x%x for QEMU\n",
+			bar);
+		/* panic("", "base address is not properly configured", NO_NUM); */
+	}
 	dep->de_base_port= bar;
 
 	ilr= pci_attr_r8(devind, PCI_ILR);
diff --git a/drivers/dpeth/dp.c b/drivers/dpeth/dp.c
index 83b81eb3a..115129a32 100644
--- a/drivers/dpeth/dp.c
+++ b/drivers/dpeth/dp.c
@@ -49,6 +49,9 @@
 **  +------------+---------+---------+---------------+
 **
 **  $Log$
+**  Revision 1.6  2005/08/05 18:37:15  philip
+**  Temp hacks for QEMU. Call to env_setargs in dpeth.
+**
 **  Revision 1.5  2005/08/02 15:30:35  jnherder
 **  Various updates to support dynamically starting drivers.
 **  Output during initialization should be suppressed. Unless an error occurs.
@@ -90,7 +93,6 @@
 */
 extern int errno;
 static dpeth_t de_table[DE_PORT_NR];
-static int dpeth_tasknr = ANY;
 
 typedef struct dp_conf {	/* Configuration description structure */
   port_t dpc_port;
@@ -567,14 +569,8 @@ PUBLIC int main(int argc, char **argv)
   dpeth_t *dep;
   int rc, fkeys, sfkeys;
 
-  /* Get precess number */
-  if ((dpeth_tasknr = getprocnr()) < 0)
-	panic(DevName, "getprocnr() failed", errno);
-#if defined USE_IOPL
-  /* Request direct access to hardware I/O ports */
-  if ((rc = sys_enable_iop(dpeth_tasknr)) != OK)
-	panic(DevName, "sys_enable_iop() failed", rc);
-#endif
+  env_setargs(argc, argv);
+
   /* Request function key for debug dumps */
   fkeys = sfkeys = 0; bit_set(sfkeys, 8);
   if ((fkey_map(&fkeys, &sfkeys)) != OK) 
diff --git a/drivers/libpci/pci.c b/drivers/libpci/pci.c
index 55403be12..374a06fd0 100644
--- a/drivers/libpci/pci.c
+++ b/drivers/libpci/pci.c
@@ -515,7 +515,12 @@ printf("probe_bus(%d)\n", busind);
 			headt= pci_attr_r8(devind, PCI_HEADT);
 			sts= pci_attr_rsts(devind);
 			if (sts & (PSR_SSE|PSR_RMAS|PSR_RTAS))
-				break;
+			{
+				printf(
+			"pci: ignoring bad value 0x%x in sts for QEMU\n",
+					sts & (PSR_SSE|PSR_RMAS|PSR_RTAS));
+				/* break; */
+			}
 			if (vid == NO_VID)
 			{
 				/* Some bridge implementations do support