From: acevest <zhaoyanbai@126.com>
Date: Wed, 17 May 2023 14:57:43 +0000 (+0800)
Subject: PCI端口新的更直观的操作模式
X-Git-Url: http://zhaoyanbai.com/repos/doxygen-warnings.log?a=commitdiff_plain;h=3537cffae510168b6d32640ff38609a38143c7db;p=kernel.git

PCI端口新的更直观的操作模式
---

diff --git a/drivers/pci.c b/drivers/pci.c
index 156f5a0..74db154 100644
--- a/drivers/pci.c
+++ b/drivers/pci.c
@@ -23,35 +23,67 @@ LIST_HEAD(pci_devs);
 
 const char *pci_get_info(unsigned int classcode, unsigned int progif);
 
-int pci_read_config_byte(int reg) {
-    outl(PCI_CONFIG_CMD(reg), PCI_ADDR);
-    return inb(PCI_DATA + (PCI_GET_CMD_REG(reg) & 3));
+#if PCI_RW_ALIGN_MODE
+int pci_read_config_byte(int cmd) {
+    outl(PCI_CONFIG_CMD(cmd), PCI_ADDR);
+    return inb(PCI_DATA + (PCI_GET_CMD_REG(cmd) & 3));
 }
 
-int pci_read_config_word(int reg) {
-    outl(PCI_CONFIG_CMD(reg), PCI_ADDR);
-    return inw(PCI_DATA + (PCI_GET_CMD_REG(reg) & 2));
+int pci_read_config_word(int cmd) {
+    outl(PCI_CONFIG_CMD(cmd), PCI_ADDR);
+    return inw(PCI_DATA + (PCI_GET_CMD_REG(cmd) & 2));
 }
 
-int pci_read_config_long(int reg) {
-    outl(PCI_CONFIG_CMD(reg), PCI_ADDR);
+int pci_read_config_long(int cmd) {
+    outl(PCI_CONFIG_CMD(cmd), PCI_ADDR);
     return inl(PCI_DATA);
 }
 
-void pci_write_config_byte(int value, int reg) {
-    outl(PCI_CONFIG_CMD(reg), PCI_ADDR);
-    outb(value & 0xFF, PCI_DATA + (reg & 3));
+void pci_write_config_byte(int value, int cmd) {
+    outl(PCI_CONFIG_CMD(cmd), PCI_ADDR);
+    outb(value & 0xFF, PCI_DATA + (cmd & 3));
 }
 
-void pci_write_config_word(int value, int reg) {
-    outl(PCI_CONFIG_CMD(reg), PCI_ADDR);
-    outw(value & 0xFFFF, PCI_DATA + (reg & 2));
+void pci_write_config_word(int value, int cmd) {
+    outl(PCI_CONFIG_CMD(cmd), PCI_ADDR);
+    outw(value & 0xFFFF, PCI_DATA + (cmd & 2));
 }
 
-void pci_write_config_long(int value, int reg) {
-    outl(PCI_CONFIG_CMD(reg), PCI_ADDR);
+void pci_write_config_long(int value, int cmd) {
+    outl(PCI_CONFIG_CMD(cmd), PCI_ADDR);
     outl(value, PCI_DATA);
 }
+#else
+int pci_read_config_byte(int cmd) {
+    outl(cmd, PCI_ADDR);
+    return inb(PCI_DATA);
+}
+
+int pci_read_config_word(int cmd) {
+    outl(cmd, PCI_ADDR);
+    return inw(PCI_DATA);
+}
+
+int pci_read_config_long(int cmd) {
+    outl(cmd, PCI_ADDR);
+    return inl(PCI_DATA);
+}
+
+void pci_write_config_byte(int value, int cmd) {
+    outl(cmd, PCI_ADDR);
+    outb(value & 0xFF, PCI_DATA);
+}
+
+void pci_write_config_word(int value, int cmd) {
+    outl(cmd, PCI_ADDR);
+    outw(value & 0xFFFF, PCI_DATA);
+}
+
+void pci_write_config_long(int value, int cmd) {
+    outl(cmd, PCI_ADDR);
+    outl(value, PCI_DATA);
+}
+#endif
 
 void scan_pci_bus(int bus) {
     u8 dev, devfn;
diff --git a/include/pci.h b/include/pci.h
index 10f4160..4120007 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -22,6 +22,15 @@
 #define PCI_ADDR 0xCF8  // CONFIG_ADDRESS
 #define PCI_DATA 0xCFC  // CONFIG_DATA
 
+// PCI Command
+// 这个PCI_CMD是写入PCI_ADDR的，通过bus,dev,fn,reg可以定位到某个PCI总线(可以有多条PCI总线)上的某个设备的某个功能的某个寄存器
+#define PCI_CMD(bus, dev, fn, reg) (0x80000000 | (bus << 16) | (dev << 11) | (fn << 8) | reg)
+
+#if PCI_RW_ALIGN_MODE
+#define PCI_CONFIG_CMD(cmd) (cmd & ~3)
+#define PCI_GET_CMD_REG(cmd) (cmd & 0xFF)
+#endif
+
 // PCI Device
 //  All PCI compliant devices must support the Vendor ID, Device ID, Command and Status, Revision ID, Class Code and
 //  Header Type fields.Implementation of the other registers is optional, depending upon the devices functionality.
@@ -178,12 +187,6 @@ typedef union pci_device
 #define PCI_MINGNT 0x3E
 #define PCI_MAXLAT 0x3F
 
-// PCI Command Register
-#define PCI_CMD(bus, dev, devfn, reg) (0x80000000 | (bus << 16) | (dev << 11) | (devfn << 8) | reg)
-
-#define PCI_CONFIG_CMD(cmd) (cmd & ~3)
-#define PCI_GET_CMD_REG(cmd) (cmd & 0xFF)
-
 /*   PCI IDS   */
 // Display
 #define PCI_BASE_CLASS_DISPLAY 0x03