From: David van Moolenbroek <david@minix3.org>
Date: Wed, 22 Feb 2017 15:23:10 +0000 (+0000)
Subject: Rename MINIX service(8) to minix-service(8)
X-Git-Url: http://zhaoyanbai.com/repos/?a=commitdiff_plain;h=refs%2Fchanges%2F01%2F3401%2F1;p=minix.git

Rename MINIX service(8) to minix-service(8)

IMPORTANT: this change has a docs/UPDATING entry!

This rename is unfortunately necessary because NetBSD has decided to
create its own service(8) utility, and we will want to import theirs
as well.  The two can obviously not coexist.

Also move ours from /bin to /sbin, as it is a superuser-only utility.

Change-Id: Ic6e46ffb3a84b4747d2fdcb0d74e62dbea065039
---

diff --git a/distrib/sets/lists/minix-base/mi b/distrib/sets/lists/minix-base/mi
index 3c5dc9f93..0f4ba2d25 100644
--- a/distrib/sets/lists/minix-base/mi
+++ b/distrib/sets/lists/minix-base/mi
@@ -36,7 +36,7 @@
 ./bin/mv                                                minix-base
 ./bin/netconf                                           minix-base
 ./bin/pax                                               minix-base
-./bin/printconfig                                       minix-base
+./bin/printconfig                                       minix-base      obsolete
 ./bin/printroot                                         minix-base
 ./bin/ps                                                minix-base
 ./bin/pwd                                               minix-base
@@ -46,7 +46,7 @@
 ./bin/readclock                                         minix-base
 ./bin/rm                                                minix-base
 ./bin/rmdir                                             minix-base
-./bin/service                                           minix-base
+./bin/service                                           minix-base      obsolete
 ./bin/setup                                             minix-base
 ./bin/sh                                                minix-base
 ./bin/sleep                                             minix-base
@@ -185,6 +185,7 @@
 ./sbin/fsck_mfs                                         minix-base
 ./sbin/halt                                             minix-base
 ./sbin/init                                             minix-base
+./sbin/minix-service                                    minix-base
 ./sbin/mkfs.mfs                                         minix-base
 ./sbin/mknod                                            minix-base
 ./sbin/newfs_ext2fs                                     minix-base
@@ -194,6 +195,7 @@
 ./sbin/nologin                                          minix-base
 ./sbin/ping                                             minix-base
 ./sbin/poweroff                                         minix-base
+./sbin/printconfig                                      minix-base
 ./sbin/reboot                                           minix-base
 ./sbin/shutdown                                         minix-base
 ./sbin/sysctl                                           minix-base
diff --git a/distrib/sets/lists/minix-debug/mi b/distrib/sets/lists/minix-debug/mi
index e15bc27ac..7ca9a7265 100644
--- a/distrib/sets/lists/minix-debug/mi
+++ b/distrib/sets/lists/minix-debug/mi
@@ -134,7 +134,7 @@
 ./usr/libdata/debug/bin/mount.debug                     minix-debug     debug
 ./usr/libdata/debug/bin/mv.debug                        minix-debug     debug
 ./usr/libdata/debug/bin/pax.debug                       minix-debug     debug
-./usr/libdata/debug/bin/printconfig.debug               minix-debug     debug
+./usr/libdata/debug/bin/printconfig.debug               minix-debug     debug,obsolete
 ./usr/libdata/debug/bin/printroot.debug                 minix-debug     debug
 ./usr/libdata/debug/bin/ps.debug                        minix-debug     debug
 ./usr/libdata/debug/bin/pwd.debug                       minix-debug     debug
@@ -143,7 +143,7 @@
 ./usr/libdata/debug/bin/readclock.debug                 minix-debug     debug
 ./usr/libdata/debug/bin/rm.debug                        minix-debug     debug
 ./usr/libdata/debug/bin/rmdir.debug                     minix-debug     debug
-./usr/libdata/debug/bin/service.debug                   minix-debug     debug
+./usr/libdata/debug/bin/service.debug                   minix-debug     debug,obsolete
 ./usr/libdata/debug/bin/sh.debug                        minix-debug     debug
 ./usr/libdata/debug/bin/sleep.debug                     minix-debug     debug
 ./usr/libdata/debug/bin/stty.debug                      minix-debug     debug
@@ -161,12 +161,14 @@
 ./usr/libdata/debug/sbin/fsck_ext2fs.debug              minix-debug     debug
 ./usr/libdata/debug/sbin/fsck_mfs.debug                 minix-debug     debug
 ./usr/libdata/debug/sbin/init.debug                     minix-debug     debug
+./usr/libdata/debug/sbin/minix-service.debug            minix-debug     debug
 ./usr/libdata/debug/sbin/mknod.debug                    minix-debug     debug
 ./usr/libdata/debug/sbin/newfs_ext2fs.debug             minix-debug     debug
 ./usr/libdata/debug/sbin/newfs_msdos.debug              minix-debug     debug
 ./usr/libdata/debug/sbin/newfs_udf.debug                minix-debug     debug
 ./usr/libdata/debug/sbin/newfs_v7fs.debug               minix-debug     debug
 ./usr/libdata/debug/sbin/ping.debug                     minix-debug     debug
+./usr/libdata/debug/sbin/printconfig.debug              minix-debug     debug
 ./usr/libdata/debug/sbin/reboot.debug                   minix-debug     debug
 ./usr/libdata/debug/sbin/shutdown.debug                 minix-debug     debug
 ./usr/libdata/debug/sbin/sysctl.debug                   minix-debug     debug
diff --git a/distrib/sets/lists/minix-man/mi b/distrib/sets/lists/minix-man/mi
index 676d3b4bb..62dcffccd 100644
--- a/distrib/sets/lists/minix-man/mi
+++ b/distrib/sets/lists/minix-man/mi
@@ -3405,6 +3405,7 @@
 ./usr/man/man8/loadramdisk.8                            minix-man
 ./usr/man/man8/makefs.8                                 minix-man
 ./usr/man/man8/makewhatis.8                             minix-man
+./usr/man/man8/minix-service.8                          minix-man
 ./usr/man/man8/mknod.8                                  minix-man
 ./usr/man/man8/mtree.8                                  minix-man
 ./usr/man/man8/netconf.8                                minix-man
@@ -3436,7 +3437,7 @@
 ./usr/man/man8/rshd.8                                   minix-man
 ./usr/man/man8/screendump.8                             minix-man
 ./usr/man/man8/serial-ip.8                              minix-man       obsolete
-./usr/man/man8/service.8                                minix-man
+./usr/man/man8/service.8                                minix-man       obsolete
 ./usr/man/man8/setup.8                                  minix-man
 ./usr/man/man8/shutdown.8                               minix-man
 ./usr/man/man8/slip.8                                   minix-man
diff --git a/docs/UPDATING b/docs/UPDATING
index 12a5dd7d0..3a53ccdd4 100644
--- a/docs/UPDATING
+++ b/docs/UPDATING
@@ -1,3 +1,18 @@
+20170222:
+	Because of naming conflicts, the MINIX 3 service(8) utility has been
+	renamed to "minix-service".  After successfully rebuilding the system
+	*and* rebooting (no earlier!), remove the old service utility:
+
+		# rm /bin/service
+
+	Better yet, use the postinstall(8) command to remove all files marked
+	as obsolete.  It is not a bad idea to do this every now and then:
+
+		# postinstall fix obsolete
+
+	..but only ever after the reboot!  Either way, deleting the old service
+	tool will avoid conflicts with the same-named NetBSD utility later on.
+
 20170218:
 	Before starting a build, you will have to update your master.passwd and
 	group files in /etc.  This is needed because we have switched over from
diff --git a/etc/rc b/etc/rc
index f9fcd2140..2f310d3de 100755
--- a/etc/rc
+++ b/etc/rc
@@ -46,7 +46,7 @@ up()
     service=$1
     shift
 
-    service $opt up /service/$service "$@"
+    minix-service $opt up /service/$service "$@"
 }
 
 edit()
@@ -72,7 +72,7 @@ edit()
     if [ ! -x $binlocation ]
     then	binlocation=/sbin/$service
     fi
-    service $opt edit $binlocation -label $service "$@"
+    minix-service $opt edit $binlocation -label $service "$@"
 }
 
 while getopts 'saf' opt
@@ -174,7 +174,7 @@ autoboot|start)
 	rootline=`cat /etc/mtab | grep "on / "`
 	rootfs=fs_`echo "$rootline" | cut -d' ' -f1 | cut -d'/' -f3`
 	roottype=`echo "$rootline" | cut -d' ' -f5`
-	service -c edit /service/$roottype -label $rootfs
+	minix-service -c edit /service/$roottype -label $rootfs
     fi
 
     if [ "$sflag" ]
@@ -224,11 +224,11 @@ down|stop)
 
     if [ -x /service/usbd ]
     then
-	service down usbd
+	minix-service down usbd
     fi
 
     # Tell RS server we're going down.
-    service shutdown
+    minix-service shutdown
     ;;
 esac
 
diff --git a/etc/rc.capes/BB-BONE-WTHR-01 b/etc/rc.capes/BB-BONE-WTHR-01
index cb60e3e93..a66e48bf2 100644
--- a/etc/rc.capes/BB-BONE-WTHR-01
+++ b/etc/rc.capes/BB-BONE-WTHR-01
@@ -4,17 +4,17 @@
 
 # TSL2550 Ambient Light Sensor
 test -e /dev/tsl2550b3s39 || (cd /dev && MAKEDEV tsl2550b3s39)
-/bin/service up /service/tsl2550 -dev /dev/tsl2550b3s39 \
+/sbin/minix-service up /service/tsl2550 -dev /dev/tsl2550b3s39 \
 	-label tsl2550.3.39 -args 'bus=3 address=0x39' && echo -n " tsl2550"
 
 # SHT21 Temperature and Humidity Sensor
 test -e /dev/sht21b3s40 || (cd /dev && MAKEDEV sht21b3s40)
-/bin/service up /service/sht21 -dev /dev/sht21b3s40 \
+/sbin/minix-service up /service/sht21 -dev /dev/sht21b3s40 \
 	-label sht21.3.40 -args 'bus=3 address=0x40' && echo -n " sht21"
 
 # BMP085 Temperature and Pressure Sensor
 test -e /dev/bmp085b3s77 || (cd /dev && MAKEDEV bmp085b3s77)
-/bin/service up /service/bmp085 -dev /dev/bmp085b3s77 \
+/sbin/minix-service up /service/bmp085 -dev /dev/bmp085b3s77 \
 	-label bmp085.3.77 -args 'bus=3 address=0x77' && echo -n " bmp085"
 
 daemonize tcpd http /usr/share/beaglebone/weather/weatherstation.lua
diff --git a/etc/rs.inet b/etc/rs.inet
index 448915d7d..128301fe4 100755
--- a/etc/rs.inet
+++ b/etc/rs.inet
@@ -57,7 +57,7 @@ echo "Arguments: $@"
 
 restarts=$(grep restarts /proc/service/$1 |cut -d: -f2)
 restarts=$(( $restarts + 1 ))
-service down "$1"
+minix-service down "$1"
 kill_by_name dhcpd
 kill_by_name nonamed
 kill_by_name syslogd
@@ -66,10 +66,10 @@ kill_by_name syslogd
 sleep 3
 if [ X`/bin/sysenv lwip` = Xyes ]
 then
-	service up /service/lwip -script /etc/rs.inet -dev /dev/ip -restarts $restarts
+	minix-service up /service/lwip -script /etc/rs.inet -dev /dev/ip -restarts $restarts
 	dhcpd --lwip &
 else
-	service up /service/inet -script /etc/rs.inet -dev /dev/ip -restarts $restarts
+	minix-service up /service/inet -script /etc/rs.inet -dev /dev/ip -restarts $restarts
 	daemonize dhcpd
 fi
 daemonize nonamed -L
diff --git a/etc/usr/rc b/etc/usr/rc
index 8603c41d3..ae391f724 100644
--- a/etc/usr/rc
+++ b/etc/usr/rc
@@ -97,7 +97,7 @@ up()
     for dir in $SERVICES_DIRS
     do	bin=$dir/$service
 	if [ -x $bin -a -z "$found" ]
-	then	service $opt up $bin "$@" 
+	then	minix-service $opt up $bin "$@" 
     		echo -n " $service"
 		found=yes
 	fi
diff --git a/minix/commands/Makefile b/minix/commands/Makefile
index 08f04f17f..35d4e156a 100644
--- a/minix/commands/Makefile
+++ b/minix/commands/Makefile
@@ -15,13 +15,13 @@ SUBDIR=	add_route arp at backup \
 	intr irdpd isoread \
 	loadkeys loadramdisk logger look lp \
 	lpd lspci mail MAKEDEV \
-	mount mt netconf \
+	minix-service mount mt netconf \
 	nonamed \
 	prep printroot \
 	profile progressbar pr_routes \
 	ramdisk rarpd rawspeed readclock \
 	remsync rget rlogin \
-	rotate service setup \
+	rotate setup \
 	slip spell sprofalyze sprofdiff srccrc \
 	svrctl swifi synctree sysenv \
 	tcpd tcpdp tcpstat telnet \
diff --git a/minix/commands/devmand/main.c b/minix/commands/devmand/main.c
index 14810fc64..b22cc5dc3 100644
--- a/minix/commands/devmand/main.c
+++ b/minix/commands/devmand/main.c
@@ -9,12 +9,10 @@
 #include <assert.h>
 #include <signal.h>
 #include <minix/dmap.h>
+#include <minix/paths.h>
 #include "usb_driver.h"
 #include "proto.h"
 
-#define SERVICE_BINARY "/bin/service"
-
-
 #define DEVMAN_TYPE_NAME "dev_type"
 #define PATH_LEN 256
 #define INVAL_MAJOR -1
@@ -166,8 +164,8 @@ int stop_driver(struct devmand_driver_instance *inst)
 	assert(inst->label);
 
 	snprintf(cmdl, 1024, "%s down %s %d",
-	    SERVICE_BINARY, inst->label, inst->dev_id);
-	dbg("executing service: \"%s\"", cmdl);
+	    _PATH_MINIX_SERVICE, inst->label, inst->dev_id);
+	dbg("executing minix-service: \"%s\"", cmdl);
 	ret = system(cmdl);
 	if (ret != 0)
 	{
@@ -201,9 +199,9 @@ int start_driver(struct devmand_driver_instance *inst)
 	assert(inst->label);
 
 	snprintf(cmdl, 1024, "%s up %s  -major %d -devid %d -label %s",
-	    SERVICE_BINARY, inst->drv->binary, inst->major, inst->dev_id,
+	    _PATH_MINIX_SERVICE, inst->drv->binary, inst->major, inst->dev_id,
 		inst->label);
-	dbg("executing service: \"%s\"", cmdl);
+	dbg("executing minix-service: \"%s\"", cmdl);
 
 	ret = system(cmdl);
 
@@ -739,7 +737,7 @@ static void usb_intf_add_event(char *path, int dev_id)
 	drv_inst->dev_id = dev_id;
 
 
-	/* start driver (invoke service) */
+	/* start driver (invoke minix-service) */
 	start_driver(drv_inst);
 
 	/*
diff --git a/minix/commands/minix-service/Makefile b/minix/commands/minix-service/Makefile
new file mode 100644
index 000000000..2d5851572
--- /dev/null
+++ b/minix/commands/minix-service/Makefile
@@ -0,0 +1,10 @@
+# Makefile for minix-service
+PROGS=	minix-service printconfig
+SRCS.minix-service=minix-service.c parse.c util.c
+SRCS.printconfig=print.c parse.c util.c
+
+BINDIR= /sbin
+MAN.minix-service=	minix-service.8 system.conf.5
+MAN.printconfig=
+
+.include <bsd.prog.mk>
diff --git a/minix/commands/service/config.h b/minix/commands/minix-service/config.h
similarity index 100%
rename from minix/commands/service/config.h
rename to minix/commands/minix-service/config.h
diff --git a/minix/commands/service/service.8 b/minix/commands/minix-service/minix-service.8
similarity index 84%
rename from minix/commands/service/service.8
rename to minix/commands/minix-service/minix-service.8
index 711c02248..b78f94a72 100644
--- a/minix/commands/service/service.8
+++ b/minix/commands/minix-service/minix-service.8
@@ -1,24 +1,24 @@
-.TH SERVICE 8
+.TH MINIX-SERVICE 8
 .SH NAME
-service \- Manage an operating system service.
+minix-service \- Manage an operating system service.
 .SH SYNOPSIS
 .PP
-\fBservice [-b -c -n -p -r] (up|run|edit|update)\fR \fI<binary|self>\fR
+\fBminix-service [-b -c -n -p -r] (up|run|edit|update)\fR \fI<binary|self>\fR
 [\fB-args\fR \fI<args>\fR] [\fB-dev\fR \fI<special>\fR]
 [\fB-period\fR \fI<ticks>\fR]
 [\fB-script\fR \fI<path>\fR] [\fB-label\fR \fI<name>\fR]
 [\fB-config\fR \fI<path>\fR] [\fB-state\fR \fI<state>\fR]
 [\fB-maxtime\fR \fI<time>\fR]
 .PP
-\fBservice down\fR \fI<label>\fR
+\fBminix-service down\fR \fI<label>\fR
 .PP
-\fBservice refresh\fR \fI<label>\fR
+\fBminix-service refresh\fR \fI<label>\fR
 .PP
-\fBservice restart\fR \fI<label>\fR
+\fBminix-service restart\fR \fI<label>\fR
 .PP
-\fBservice clone\fR \fI<label>\fR
+\fBminix-service clone\fR \fI<label>\fR
 .PP
-\fBservice shutdown\fR
+\fBminix-service shutdown\fR
 .br
 .de FL
 .TP
@@ -32,7 +32,7 @@ service \- Manage an operating system service.
 ..
 .SH DESCRIPTION
 .PP
-The \fBservice\fR utility instructs the reincarnation server (\fBRS\fR)
+The \fBminix-service\fR utility instructs the reincarnation server (\fBRS\fR)
 to perform an action for a given system service (an OS server
 or device driver). The action may concern an existing system service
 (SHIFT+F6 to list them all), or a new system service to be started
@@ -51,7 +51,7 @@ or device driver). The action may concern an existing system service
 .SH ACTIONS
 .PP
 .SS
-\fBservice up\fR \fI<binary>\fR
+\fBminix-service up\fR \fI<binary>\fR
 .PP
 .PP
 Starts a new system service identified by the given \fI<binary>\fR,
@@ -133,20 +133,20 @@ for the syntax to use in the system configuration file.
 The default is to use the global system configuration file \fB/etc/system.conf\fR.
 .PP
 .SS
-\fBservice run\fR \fI<binary>\fR
+\fBminix-service run\fR \fI<binary>\fR
 .PP
 .PP
 Runs a new system service identified by the given \fI<binary>\fR,
 which must be specified using an absolute path. Similar to
-\fBservice up\fR \fI<binary>\fR, but instructs \fBRS\fR not to
+\fBminix-service up\fR \fI<binary>\fR, but instructs \fBRS\fR not to
 restart the service upon termination. This action is currently a shorthand
-for \fBservice up\fR \fI<binary>\fR \fB-script\fR \fI/etc/rs.single\fR, which
-uses a recovery script that simply brings down the service upon termination.
-This action should be only used for short-lived programs that need system
-service privileges and do not require crash recovery support.
+for \fBminix-service up\fR \fI<binary>\fR \fB-script\fR \fI/etc/rs.single\fR,
+which uses a recovery script that simply brings down the service upon
+termination. This action should be only used for short-lived programs that need
+system service privileges and do not require crash recovery support.
 .PP
 .SS
-\fBservice edit\fR \fI<binary>\fR [\fB-label\fR \fI<name>\fR]
+\fBminix-service edit\fR \fI<binary>\fR [\fB-label\fR \fI<name>\fR]
 .PP
 .PP
 Edits settings of an existing system service identified by the given
@@ -158,7 +158,7 @@ associated to the service will no be updated. This
 action takes the same options supported by the \fBup\fR action.
 .PP
 .SS
-\fBservice update\fR \fI<binary|self>\fR
+\fBminix-service update\fR \fI<binary|self>\fR
 .PP
 .PP
 Live updates an existing system service with a new version identified by the
@@ -182,7 +182,7 @@ specifies the maximum amount time for the service to prepare
 for the update. The default is 0 (unlimited).
 .PP
 .SS
-\fBservice down\fR \fI<label>\fR
+\fBminix-service down\fR \fI<label>\fR
 .PP
 .PP
 Stops an existing system service identified by the given \fI<label>\fR. \fBRS\fR
@@ -190,28 +190,28 @@ will bring down the service without attempting to restart it. Critical system
 services cannot be shut down.
 .PP
 .SS
-\fBservice refresh\fR \fI<label>\fR
+\fBminix-service refresh\fR \fI<label>\fR
 .PP
 .PP
 Refreshes an existing system service identified by the given \fI<label>\fR.
 \fBRS\fR will kill the service and attempt to restart it.
 .PP
 .SS
-\fBservice restart\fR \fI<label>\fR
+\fBminix-service restart\fR \fI<label>\fR
 .PP
 .PP
 Restarts an existing terminated system service identified by the
 given \fI<label>\fR. This action can only be used from a recovery script.
 .PP
 .SS
-\fBservice clone\fR \fI<label>\fR
+\fBminix-service clone\fR \fI<label>\fR
 .PP
 .PP
 Clones an existing system service to create a replica \fBRS\fR will use
 to restart the service upon termination.
 .PP
 .SS
-\fBservice shutdown\fR
+\fBminix-service shutdown\fR
 .PP
 .PP
 Tells \fBRS\fR the system is about to shutdown and no system service should
@@ -219,15 +219,15 @@ be restarted upon termination.
 .PP
 .SH EXAMPLES
 .TP 20
-.B service up /sbin/is -period 5HZ
+.B minix-service up /sbin/is -period 5HZ
 # Start the IS server and check its status every 5 seconds.
 .br
 .TP 20
-.B service up /usr/sbin/dp8390 -args DPETH0=pci
+.B minix-service up /usr/sbin/dp8390 -args DPETH0=pci
 # Start the DP8390 ethernet driver, passing one argument.
 .br
 .TP 20
-.B service down lance
+.B minix-service down lance
 # Stop the system service with label lance.
 .br
 .SH "SEE ALSO"
diff --git a/minix/commands/service/service.c b/minix/commands/minix-service/minix-service.c
similarity index 100%
rename from minix/commands/service/service.c
rename to minix/commands/minix-service/minix-service.c
diff --git a/minix/commands/service/parse.c b/minix/commands/minix-service/parse.c
similarity index 99%
rename from minix/commands/service/parse.c
rename to minix/commands/minix-service/parse.c
index dfae9e3c3..3dcdc24a4 100644
--- a/minix/commands/service/parse.c
+++ b/minix/commands/minix-service/parse.c
@@ -1117,8 +1117,8 @@ static const char *do_config(const char *label, char *filename, struct rs_config
 	}
 	if (cp == NULL)
 	{
-		fprintf(stderr, "service: service '%s' not found in '%s'\n",
-			label, filename);
+		fprintf(stderr, "minix-service: service '%s' not found in "
+		    "'%s'\n", label, filename);
 		exit(1);
 	}
 
diff --git a/minix/commands/service/parse.h b/minix/commands/minix-service/parse.h
similarity index 100%
rename from minix/commands/service/parse.h
rename to minix/commands/minix-service/parse.h
diff --git a/minix/commands/service/print.c b/minix/commands/minix-service/print.c
similarity index 100%
rename from minix/commands/service/print.c
rename to minix/commands/minix-service/print.c
diff --git a/minix/commands/service/proto.h b/minix/commands/minix-service/proto.h
similarity index 100%
rename from minix/commands/service/proto.h
rename to minix/commands/minix-service/proto.h
diff --git a/minix/commands/service/system.conf.5 b/minix/commands/minix-service/system.conf.5
similarity index 94%
rename from minix/commands/service/system.conf.5
rename to minix/commands/minix-service/system.conf.5
index db46b394b..5ae0fe03b 100644
--- a/minix/commands/service/system.conf.5
+++ b/minix/commands/minix-service/system.conf.5
@@ -12,9 +12,9 @@ The file
 .B /etc/system.conf
 is the global system configuration file that contains the
 configuration for all the primary system services. This is the file
-that the \fBservice\fR utility uses by default. Custom configuration
+that the \fBminix-service\fR utility uses by default. Custom configuration
 files with the same format can be specified on a per-service basis. See
-.BR service (8)
+.BR minix-service (8)
 for more details.
 
 This page is a summary of all the elements that can be found in this
@@ -23,8 +23,8 @@ configuration file.
 The syntax used is that of the common configuration file described in
 .BR configfile (5).
 .PP
-The \fBservice\fR utility scans the configuration file from beginning to end
-to gather information about a specific system service when starting or
+The \fBminix-service\fR utility scans the configuration file from beginning to
+end to gather information about a specific system service when starting or
 updating the properties of a service.
 The file contains a collection of service entries of the form:
 
@@ -47,7 +47,7 @@ be used:
 .RS
 specifies the user id or the user name to use to run the system service.
 \fISELF\fR can be used when the service has to start with the realuid of
-the user who's executing the \fBservice\fR utility.
+the user who's executing the \fBminix-service\fR utility.
 Many system services run with root privileges (uid \fB0\fR).
 The default user is service (uid \fB12\fR).
 .RE
@@ -174,7 +174,7 @@ The default is to allow no controller services.
 .PP
 .SH "SEE ALSO"
 .BR configfile (5),
-.BR service (8),
+.BR minix-service (8),
 .BR boot (8).
 .SH AUTHOR
 Cristiano Giuffrida <giuffrida@cs.vu.nl>
diff --git a/minix/commands/service/util.c b/minix/commands/minix-service/util.c
similarity index 77%
rename from minix/commands/service/util.c
rename to minix/commands/minix-service/util.c
index 71b4f7570..44e930515 100644
--- a/minix/commands/service/util.c
+++ b/minix/commands/minix-service/util.c
@@ -7,7 +7,7 @@ void fatal(char *fmt, ...)
 {
 	va_list ap;
 
-	fprintf(stderr, "service: fatal error: ");
+	fprintf(stderr, "minix-service: fatal error: ");
 	va_start(ap, fmt);
 	vfprintf(stderr, fmt, ap);
 	va_end(ap);
@@ -20,7 +20,7 @@ void warning(char *fmt, ...)
 {
 	va_list ap;
 
-	fprintf(stderr, "service: warning: ");
+	fprintf(stderr, "minix-service: warning: ");
 	va_start(ap, fmt);
 	vfprintf(stderr, fmt, ap);
 	va_end(ap);
diff --git a/minix/commands/service/Makefile b/minix/commands/service/Makefile
deleted file mode 100644
index f29caf664..000000000
--- a/minix/commands/service/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# Makefile for service
-PROGS=	service printconfig
-SRCS.service=service.c parse.c util.c
-SRCS.printconfig=print.c parse.c util.c
-
-BINDIR= /bin
-MAN.service=	service.8 system.conf.5
-MAN.printconfig=
-
-.include <bsd.prog.mk>
diff --git a/minix/commands/swifi/tests/rs.restart_imm b/minix/commands/swifi/tests/rs.restart_imm
index 815a842f8..8cb1fa34d 100755
--- a/minix/commands/swifi/tests/rs.restart_imm
+++ b/minix/commands/swifi/tests/rs.restart_imm
@@ -2,4 +2,4 @@
 
 # 'Recovery' script immediately restarts.
 echo "Arguments: $@" >/dev/console
-service restart "$1"
+minix-service restart "$1"
diff --git a/minix/commands/swifi/tests/run_swifi b/minix/commands/swifi/tests/run_swifi
index 08e1bc95f..29eed2ebb 100644
--- a/minix/commands/swifi/tests/run_swifi
+++ b/minix/commands/swifi/tests/run_swifi
@@ -9,7 +9,7 @@ EXE=$EXEDIR/$NAME
 
 start_driver()
 {
-	service up $EXE -label $LABEL -script /etc/rs.single -period 3HZ
+	minix-service up $EXE -label $LABEL -script /etc/rs.single -period 3HZ
 }
 
 do_one()
@@ -51,7 +51,7 @@ one_round()
 }
 
 # Start our own driver.
-service down $LABEL
+minix-service down $LABEL
 sleep 10	# Allow driver to die
 start_driver
 
diff --git a/minix/commands/swifi/tests/run_t1 b/minix/commands/swifi/tests/run_t1
index c4b22424f..396beee4c 100755
--- a/minix/commands/swifi/tests/run_t1
+++ b/minix/commands/swifi/tests/run_t1
@@ -101,9 +101,9 @@ random)
 esac
 
 # Start our own driver.
-service down $LABEL
+minix-service down $LABEL
 sleep 2	# Allow driver to die
-service up $EXE -script `pwd`/rs.restart_imm -period 3HZ $DEV
+minix-service up $EXE -script `pwd`/rs.restart_imm -period 3HZ $DEV
 
 i=0
 while [ $i -lt "$count" ]
@@ -119,4 +119,4 @@ do
 done
 
 # Restart the driver
-service refresh $LABEL
+minix-service refresh $LABEL
diff --git a/minix/commands/swifi/tests/run_t2 b/minix/commands/swifi/tests/run_t2
index 757b2191c..88be6dd9d 100755
--- a/minix/commands/swifi/tests/run_t2
+++ b/minix/commands/swifi/tests/run_t2
@@ -121,9 +121,9 @@ random)
 esac
 
 # Start our own driver.
-service down $LABEL
+minix-service down $LABEL
 sleep 10	# Allow driver to die
-service up $EXE -script `pwd`/rs.restart_imm -period 3HZ
+minix-service up $EXE -script `pwd`/rs.restart_imm -period 3HZ
 
 i=0
 while [ $i -lt "$count" ]
@@ -143,4 +143,4 @@ echo "driver crashed after $fault_blocks blocks"
 echo "driver failed to connect after $connect_blocks blocks"
 
 # Restart the driver
-service refresh $LABEL
+minix-service refresh $LABEL
diff --git a/minix/commands/update_asr/update_asr.8 b/minix/commands/update_asr/update_asr.8
index 3d3e396da..41d5ae369 100644
--- a/minix/commands/update_asr/update_asr.8
+++ b/minix/commands/update_asr/update_asr.8
@@ -35,7 +35,7 @@ The following options are available:
 Enable verbose mode.
 .El
 .Sh SEE ALSO
-.Xr service 8
+.Xr minix-service 8
 .Sh AUTHORS
 The
 .Nm
diff --git a/minix/commands/update_asr/update_asr.sh b/minix/commands/update_asr/update_asr.sh
index 66edd2db6..0c9a98b28 100644
--- a/minix/commands/update_asr/update_asr.sh
+++ b/minix/commands/update_asr/update_asr.sh
@@ -25,8 +25,8 @@ SKIP="memory vm"
 STATES="vfs:2 ahci_:2 virtio_blk_:2"
 
 # If this variable is set, it is used as timeout for the live updates.  The
-# service(8) argument takes a number of click ticks, or a number of seconds
-# if the value ends with "HZ".
+# minix-service(8) argument takes a number of click ticks, or a number of
+# seconds if the value ends with "HZ".
 TIMEOUT=300HZ
 
 # Configuration ends here.
@@ -122,7 +122,7 @@ for service in $services; do
 	# Perform the live update.  The update may legitimately fail if the
 	# service is not in the right state.  TODO: report transient errors
 	# as debugging output only.
-	service -a update $binary -progname $filename -label $label \
+	minix-service -a update $binary -progname $filename -label $label \
 		-asr-count $count $state $maxtime
 	error=$?
 	if [ $error -eq 0 ]; then
diff --git a/minix/drivers/audio/README b/minix/drivers/audio/README
index ee1b90223..84f8d8ec0 100644
--- a/minix/drivers/audio/README
+++ b/minix/drivers/audio/README
@@ -6,4 +6,4 @@ es1371/            ES1371 driver
 sb16/              SB16 ISA driver
 
 Running the drivers:
-* service up /service/es137{0,1} -dev /dev/audio
+* minix-service up /service/es137{0,1} -dev /dev/audio
diff --git a/minix/drivers/audio/sb16/README b/minix/drivers/audio/sb16/README
index 7ab8dd2c7..96466c203 100644
--- a/minix/drivers/audio/sb16/README
+++ b/minix/drivers/audio/sb16/README
@@ -11,8 +11,8 @@ Installation instructions SB16 driver Minix >= 3.0.7
 (default 7 and 220)
 - make install
 - MAKEDEV /dev/audio (if /dev/audio doesn't allready exist)
-- service up /service/sb16_dsp -dev /dev/audio
-- service up /service/sb16_mixer -dev /dev/mixer
+- minix-service up /service/sb16_dsp -dev /dev/audio
+- minix-service up /service/sb16_mixer -dev /dev/mixer
 done... (you can include the last 2 lines in /usr/etc/rc)
 
 
diff --git a/minix/drivers/bus/i2c/README.txt b/minix/drivers/bus/i2c/README.txt
index a1ab83777..53b39cc86 100644
--- a/minix/drivers/bus/i2c/README.txt
+++ b/minix/drivers/bus/i2c/README.txt
@@ -33,9 +33,9 @@ cd /dev && MAKEDEV i2c-1 && MAKEDEV i2c-2 && MAKEDEV i2c-3
 
 Starting up the instances:
 
-/bin/service up /service/i2c -dev /dev/i2c-1 -label i2c.1 -args instance=1
-/bin/service up /service/i2c -dev /dev/i2c-2 -label i2c.2 -args instance=2
-/bin/service up /service/i2c -dev /dev/i2c-3 -label i2c.3 -args instance=3
+/sbin/minix-service up /service/i2c -dev /dev/i2c-1 -label i2c.1 -args instance=1
+/sbin/minix-service up /service/i2c -dev /dev/i2c-2 -label i2c.2 -args instance=2
+/sbin/minix-service up /service/i2c -dev /dev/i2c-3 -label i2c.3 -args instance=3
 
 There is an i2cscan program from NetBSD which can detect devices on the bus:
 
diff --git a/minix/drivers/eeprom/cat24c256/README.txt b/minix/drivers/eeprom/cat24c256/README.txt
index 712498d19..de881130c 100644
--- a/minix/drivers/eeprom/cat24c256/README.txt
+++ b/minix/drivers/eeprom/cat24c256/README.txt
@@ -12,5 +12,5 @@ Testing the Code
 
 Starting up an instance:
 
-/bin/service up /service/cat24c256 -dev /dev/eepromb1s50 -label cat24c256.1.50 -args 'bus=1 address=0x50'
+/sbin/minix-service up /service/cat24c256 -dev /dev/eepromb1s50 -label cat24c256.1.50 -args 'bus=1 address=0x50'
 
diff --git a/minix/drivers/power/tps65217/README.txt b/minix/drivers/power/tps65217/README.txt
index 905894a39..ca0fa3ba3 100644
--- a/minix/drivers/power/tps65217/README.txt
+++ b/minix/drivers/power/tps65217/README.txt
@@ -12,9 +12,9 @@ Testing the Code
 
 Starting up an instance:
 
-/bin/service up /usr/sbin/tps65217 -label tps65217.1.24 \
+/sbin/minix-service up /usr/sbin/tps65217 -label tps65217.1.24 \
 	-args 'bus=1 address=0x24'
 
 Killing an instance:
 
-/bin/service down tps65217.1.24
+/sbin/minix-service down tps65217.1.24
diff --git a/minix/drivers/power/tps65950/README.txt b/minix/drivers/power/tps65950/README.txt
index b72b5d885..d632abdae 100644
--- a/minix/drivers/power/tps65950/README.txt
+++ b/minix/drivers/power/tps65950/README.txt
@@ -28,9 +28,9 @@ Testing the Code
 
 Starting up an instance:
 
-/bin/service up /service/tps65950 -label tps65950.1.48 \
+/sbin/minix-service up /service/tps65950 -label tps65950.1.48 \
 	-args 'bus=1 address=0x48'
 
 Killing an instance:
 
-/bin/service down tps65950.1.48
+/sbin/minix-service down tps65950.1.48
diff --git a/minix/drivers/sensors/bmp085/README.txt b/minix/drivers/sensors/bmp085/README.txt
index 5d0646057..837cee99e 100644
--- a/minix/drivers/sensors/bmp085/README.txt
+++ b/minix/drivers/sensors/bmp085/README.txt
@@ -30,9 +30,9 @@ Limitations
 
 The measurement resolution is configurable in the chip, but this driver just
 uses standard mode. It could probably be implemented with an ioctl() or by
-passing an argument via the service command, but it doesn't seem too useful at
-this time. See the data sheet for the trade-offs between conversion time,
-power consumption, and resolution.
+passing an argument via the minix-service command, but it doesn't seem too
+useful at this time. See the data sheet for the trade-offs between conversion
+time, power consumption, and resolution.
 
 While only the BMP085 is supported at present, the BMP085's predecessor,
 SMD500, should be easy to support in this driver with some small changes
@@ -50,8 +50,8 @@ The driver should have been started by a script in /etc/rc.capes/ If not,
 this is how you start up an instance:
 
 cd /dev && MAKEDEV bmp085b3s77
-/bin/service up /service/bmp085 -label bmp085.3.77 -dev /dev/bmp085b3s77 \
-	-args 'bus=3 address=0x77'
+/sbin/minix-service up /service/bmp085 -label bmp085.3.77 \
+	-dev /dev/bmp085b3s77 -args 'bus=3 address=0x77'
 
 Getting the sensor value:
 
@@ -59,5 +59,5 @@ cat /dev/bmp085b3s77
 
 Killing an instance:
 
-/bin/service down bmp085.3.77
+/sbin/minix-service down bmp085.3.77
 
diff --git a/minix/drivers/sensors/sht21/README.txt b/minix/drivers/sensors/sht21/README.txt
index 41df519ab..f5a10c29f 100644
--- a/minix/drivers/sensors/sht21/README.txt
+++ b/minix/drivers/sensors/sht21/README.txt
@@ -35,9 +35,9 @@ second will return cached temperature and humidity values.
 The measurement resolution is configurable in the chip, but this driver just
 uses the default maximum resolutions (12-bit for Humidity, 14-bit for
 temperature). It could probably be implemented with an ioctl() or by passing
-an argument via the service command, but it doesn't seem too useful at this
-time. See the data sheet for the trade-off between faster conversion time and
-lower resolution.
+an argument via the minix-service command, but it doesn't seem too useful at
+this time. See the data sheet for the trade-off between faster conversion time
+and lower resolution.
 
 In testing, the temperature sensor reported a value several degrees higher
 than an indoor thermometer placed nearby. It doesn't appear to be a bug in the
@@ -54,7 +54,7 @@ The driver should have been started by a script in /etc/rc.capes/ If not,
 this is how you start up an instance:
 
 cd /dev && MAKEDEV sht21b3s40
-/bin/service up /service/sht21 -label sht21.3.40 -dev /dev/sht21b3s40 \
+/sbin/minix-service up /service/sht21 -label sht21.3.40 -dev /dev/sht21b3s40 \
 	-args 'bus=3 address=0x40'
 
 Getting the sensor value:
@@ -63,5 +63,5 @@ cat /dev/sht21b3s40
 
 Killing an instance:
 
-/bin/service down sht21.3.40
+/sbin/minix-service down sht21.3.40
 
diff --git a/minix/drivers/sensors/tsl2550/README.txt b/minix/drivers/sensors/tsl2550/README.txt
index 5244feb8f..225777301 100644
--- a/minix/drivers/sensors/tsl2550/README.txt
+++ b/minix/drivers/sensors/tsl2550/README.txt
@@ -33,8 +33,8 @@ The driver should have been started by a script in /etc/rc.capes/ If not,
 this is how you start up an instance:
 
 cd /dev && MAKEDEV tsl2550b3s39
-/bin/service up /service/tsl2550 -label tsl2550.3.39 -dev /dev/tsl2550b3s39 \
-	-args 'bus=3 address=0x39'
+/sbin/minix-service up /service/tsl2550 -label tsl2550.3.39 \
+	-dev /dev/tsl2550b3s39 -args 'bus=3 address=0x39'
 
 Getting the sensor value:
 
@@ -42,5 +42,5 @@ cat /dev/tsl2550b3s39
 
 Killing an instance:
 
-/bin/service down tsl2550.3.39
+/sbin/minix-service down tsl2550.3.39
 
diff --git a/minix/drivers/storage/mmc/emmc.txt b/minix/drivers/storage/mmc/emmc.txt
index 59c37a593..0fdd405c7 100644
--- a/minix/drivers/storage/mmc/emmc.txt
+++ b/minix/drivers/storage/mmc/emmc.txt
@@ -4,7 +4,7 @@ driver (mmcblk.c).
 * Mini how-to
 On the BeagleBone Black, the block device files /dev/c1d* (major = 8) are free.
 The driver can use /dev/c1d0.
-# service up /service/emmc -dev /dev/c1d0
+# minix-service up /service/emmc -dev /dev/c1d0
 
 * Programmed Input/Output
 The driver does not have support for DMA.
@@ -20,4 +20,4 @@ AM335x Sitara Processors Technical Reference Manual. Literature number: SPRUH73L
 Embedded MultiMediaCard Product Standard (MMCA, 4.41). Document number: JESD84-A441
 AM335x Sitara Processors Datasheet. Literature number: SPRS717F
 OMAP35x Applications Processor Technical Reference Manual. Literature number: SPRUF98X
-MINIX 3 MMC/SD source code.
\ No newline at end of file
+MINIX 3 MMC/SD source code.
diff --git a/minix/drivers/storage/mmc/mmcblk.c b/minix/drivers/storage/mmc/mmcblk.c
index 7e5446f29..631ebf17f 100644
--- a/minix/drivers/storage/mmc/mmcblk.c
+++ b/minix/drivers/storage/mmc/mmcblk.c
@@ -96,9 +96,10 @@ apply_env()
 	/* apply the env setting passed to this driver parameters accepted
 	 * log_level=[0-4] (NONE,WARN,INFO,DEBUG,TRACE) instance=[0-3]
 	 * instance/bus number to use for this driver Passing these arguments
-	 * is done when starting the driver using the service command in the
-	 * following way service up /service/mmc -args "log_level=2 instance=1
-	 * driver=dummy" -dev /dev/c2d0 */
+	 * is done when starting the driver using the minix-service command in
+	 * the following way:
+	 * minix-service up /service/mmc -args "log_level=2 instance=1
+	 *    driver=dummy" -dev /dev/c2d0 */
 	char driver[16];
 	memset(driver, '\0', 16);
 	(void) env_get_param("driver", driver, 16);
diff --git a/minix/drivers/storage/ramdisk/Makefile b/minix/drivers/storage/ramdisk/Makefile
index 05524c63f..db0a1da21 100644
--- a/minix/drivers/storage/ramdisk/Makefile
+++ b/minix/drivers/storage/ramdisk/Makefile
@@ -45,8 +45,8 @@ PROGRAMS+=		mount
 dir.mount:=	minix/commands/mount
 PROGRAMS+=		procfs
 dir.procfs:=	minix/fs/procfs
-PROGRAMS+=		service
-dir.service:=	minix/commands/service
+PROGRAMS+=		minix-service
+dir.minix-service:=	minix/commands/minix-service
 PROGRAMS+=		sh
 dir.sh:=	bin/sh
 PROGRAMS+=		sysenv
diff --git a/minix/drivers/storage/ramdisk/proto b/minix/drivers/storage/ramdisk/proto
index bdf8256b8..f418e8b40 100644
--- a/minix/drivers/storage/ramdisk/proto
+++ b/minix/drivers/storage/ramdisk/proto
@@ -13,7 +13,9 @@ d--755 0 0
 		umount ---755 0 0 umount
 		grep ---755 0 0 grep
 		sh ---755 0 0 sh
-		service ---755 0 0 service
+	$
+	sbin d--755 0 0
+		minix-service ---755 0 0 minix-service
 	$
 	service d--755 0 0
 #ifdef __i386__
diff --git a/minix/drivers/storage/ramdisk/rc b/minix/drivers/storage/ramdisk/rc
index de2a3a6a8..fc39d410f 100644
--- a/minix/drivers/storage/ramdisk/rc
+++ b/minix/drivers/storage/ramdisk/rc
@@ -5,18 +5,20 @@ exec >/dev/log
 exec 2>/dev/log
 exec </dev/null
 
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
 FSCK=/bin/fsck_mfs
 ACPI=/service/acpi
 
 if [ X`/bin/sysenv arch` = Xi386 ]
 then	if [ -e $ACPI -a -n "`sysenv acpi`" ]
 	then
-		/bin/service -c up $ACPI
+		minix-service -c up $ACPI
 	fi
-	/bin/service -c up /service/pci -dev /dev/pci
+	minix-service -c up /service/pci -dev /dev/pci
 
-	/bin/service -c up /service/input -dev /dev/kbdmux
-	/bin/service -c up /service/pckbd || :
+	minix-service -c up /service/input -dev /dev/kbdmux
+	minix-service -c up /service/pckbd || :
 
 	# Start procfs so we can access /proc/pci
 	mount -t procfs none /proc >/dev/null
@@ -30,27 +32,27 @@ then	if [ -e $ACPI -a -n "`sysenv acpi`" ]
 		virtio_blk=yes
         fi
 
-	/bin/service -cn up /service/floppy -dev /dev/fd0
+	minix-service -cn up /service/floppy -dev /dev/fd0
 	if [ X`/bin/sysenv ahci` = Xyes ]
 	then
 		# this is here temporarily, for testing purposes
-		/bin/service -c up /service/ahci -dev /dev/c0d0 -label ahci_0 -args instance=0
+		minix-service -c up /service/ahci -dev /dev/c0d0 -label ahci_0 -args instance=0
 	elif [ X"$virtio_blk" = Xyes ]
 	then
-		/bin/service -c up /service/virtio_blk -dev /dev/c0d0 -label virtio_blk_0 -args instance=0
+		minix-service -c up /service/virtio_blk -dev /dev/c0d0 -label virtio_blk_0 -args instance=0
 	else
-		/bin/service -c up /service/at_wini -dev /dev/c0d0 -label at_wini_0
-		/bin/service -cr up /service/at_wini -dev /dev/c1d0 -label at_wini_1 -args instance=1 2>/dev/null || :
+		minix-service -c up /service/at_wini -dev /dev/c0d0 -label at_wini_0
+		minix-service -cr up /service/at_wini -dev /dev/c1d0 -label at_wini_1 -args instance=1 2>/dev/null || :
 	fi
 	/bin/umount /proc >/dev/null
 fi
 
 if [ X`/bin/sysenv arch` = Xearm ]
 then	echo Starting the mmc driver
-	/bin/service -c up /service/mmc -dev /dev/c0d0
+	minix-service -c up /service/mmc -dev /dev/c0d0
 fi
 
-/bin/service up /service/procfs || echo "WARNING: couldn't start procfs"
+minix-service up /service/procfs || echo "WARNING: couldn't start procfs"
 
 if /bin/sysenv rootdevname >/dev/null
 then	rootdevname=/dev/`/bin/sysenv rootdevname`
diff --git a/minix/drivers/video/fb/README.txt b/minix/drivers/video/fb/README.txt
index f51b227b1..5fa0826a9 100644
--- a/minix/drivers/video/fb/README.txt
+++ b/minix/drivers/video/fb/README.txt
@@ -12,7 +12,7 @@ Testing the Code
 
 Starting up an instance:
 
-service up /service/fb -dev /dev/fb0 -args edid.0=cat24c256.3.50
+minix-service up /service/fb -dev /dev/fb0 -args edid.0=cat24c256.3.50
 
 The arguments take the following form:
 
diff --git a/minix/drivers/video/fb/fb_edid.c b/minix/drivers/video/fb/fb_edid.c
index 588e77a53..c671e40b6 100644
--- a/minix/drivers/video/fb/fb_edid.c
+++ b/minix/drivers/video/fb/fb_edid.c
@@ -45,11 +45,11 @@ static struct log log = {
 static char edid_providers[FB_DEV_NR][RS_MAX_LABEL_LEN+1];
 
 /*
- * Populate edid_providers from command line arguments. The service command
- * should get EDID providers like this: "-args edid.0=tda19988.1.3470" where
- * 0 is the minor number of the frame buffer, tda19988 is the device driver,
- * 1 is the i2c bus and 3470 is the slave address (the TDA19988 has 2 slave
- * addresses 0x34 and 0x70).
+ * Populate edid_providers from command line arguments. The minix-service
+ * command should get EDID providers like this: "-args edid.0=tda19988.1.3470"
+ * where 0 is the minor number of the frame buffer, tda19988 is the device
+ * driver, 1 is the i2c bus and 3470 is the slave address (the TDA19988 has 2
+ * slave addresses 0x34 and 0x70).
  */
 int
 fb_edid_args_parse(void)
diff --git a/minix/drivers/video/tda19988/README.txt b/minix/drivers/video/tda19988/README.txt
index 60c133054..be76f2d81 100644
--- a/minix/drivers/video/tda19988/README.txt
+++ b/minix/drivers/video/tda19988/README.txt
@@ -52,12 +52,12 @@ Testing the Code
 
 Starting up an instance:
 
-/bin/service up /service/tda19988 -label tda19988.1.3470 \
+/sbin/minix-service up /service/tda19988 -label tda19988.1.3470 \
 	-args 'cec_bus=1 cec_address=0x34 hdmi_bus=1 hdmi_address=0x70'
 
 Killing an instance:
 
-/bin/service down tda19988.1.3470
+/sbin/minix-service down tda19988.1.3470
 
 The driver is meant to be accessed from other drivers using the block
 device protocol, so it doesn't have a reserved major number and device file.
@@ -67,11 +67,11 @@ device file to read the EDID like this:
 cd /dev
 mknod tda19988 b 32 0
 chmod 600 tda19988
-/bin/service up /service/tda19988 -label tda19988.1.3470 \
+/sbin/minix-service up /service/tda19988 -label tda19988.1.3470 \
 	-dev /dev/tda19988 \
 	-args 'cec_bus=1 cec_address=0x34 hdmi_bus=1 hdmi_address=0x70'
 dd if=/dev/tda19988 of=/root/edid.dat count=1 bs=128
-/bin/service down tda19988.1.3470
+/sbin/minix-service down tda19988.1.3470
 hexdump -C /root/edid.dat
 rm tda19988
 
diff --git a/minix/include/minix/paths.h b/minix/include/minix/paths.h
index bb473a64f..8e0de4542 100644
--- a/minix/include/minix/paths.h
+++ b/minix/include/minix/paths.h
@@ -1,7 +1,7 @@
 #ifndef _MINIX_PATHS_H_
 #define _MINIX_PATHS_H_
 
-#define _PATH_SERVICE	"/bin/service"
+#define _PATH_MINIX_SERVICE "/sbin/minix-service"
 #define _PATH_PROC	"/proc/"
 
 #define _PATH_SYSTEM_CONF "/etc/system.conf"
diff --git a/minix/lib/libc/sys/mount.c b/minix/lib/libc/sys/mount.c
index 1a05e3daf..f3aa076ce 100644
--- a/minix/lib/libc/sys/mount.c
+++ b/minix/lib/libc/sys/mount.c
@@ -20,9 +20,9 @@ static char fspath[] = "/service/:/usr/pkg/service/"; /* Must include trailing '
 static int rs_down(char *label)
 {
 	char cmd[200];
-	if(strlen(_PATH_SERVICE)+strlen(label)+50 >= sizeof(cmd))
+	if(strlen(_PATH_MINIX_SERVICE)+strlen(label)+50 >= sizeof(cmd))
 		return -1;
-	sprintf(cmd, _PATH_SERVICE " down '%s'", label);
+	sprintf(cmd, _PATH_MINIX_SERVICE " down '%s'", label);
 	return system(cmd);
 }
 
@@ -125,13 +125,14 @@ int minix_mount(char *special, char *name, int mountflags, int srvflags,
 		return(-1);
 	}
 
-	if (strlen(_PATH_SERVICE) + strlen(path) + strlen(label) +
+	if (strlen(_PATH_MINIX_SERVICE) + strlen(path) + strlen(label) +
 	    strlen(args) + 50 >= sizeof(cmd)) {
 		errno = E2BIG;
 		return -1;
 	}
 
-	sprintf(cmd, _PATH_SERVICE " %sup %s -label '%s' -args '%s %s %s%s'",
+	sprintf(cmd, _PATH_MINIX_SERVICE
+		" %sup %s -label '%s' -args '%s %s %s%s'",
 		reuse ? "-r ": "", path, label, special, name,
 		args[0] ? "-o " : "", args);
 
diff --git a/minix/tests/blocktest/support.sh b/minix/tests/blocktest/support.sh
index eb3dc431c..b34fd0254 100644
--- a/minix/tests/blocktest/support.sh
+++ b/minix/tests/blocktest/support.sh
@@ -14,6 +14,6 @@ block_test() {
   if [ ! -b "$1" ]; then echo "$1 is not a block device" >&2; exit 1; fi
   pair=$(devtopair $1)
   if [ -z "$pair" ]; then echo "driver not found for $1" >&2; exit 1; fi
-  service up `pwd`/blocktest -args "$pair,$2" -config system.conf \
+  minix-service up `pwd`/blocktest -args "$pair,$2" -config system.conf \
     -script /etc/rs.single -label blocktest_$(stat -f '%r' $1)
 }
diff --git a/minix/tests/ddekit/ddekittest.sh b/minix/tests/ddekit/ddekittest.sh
index 9331282ea..1901186cd 100755
--- a/minix/tests/ddekit/ddekittest.sh
+++ b/minix/tests/ddekit/ddekittest.sh
@@ -6,7 +6,7 @@
 # runs the ddekit driver on the given device with the given parameters
 run_ddekittest () {
   if [ ! -x ddekittest_driver ]; then echo "compile ddekittest first!" >&2; exit 1; fi
-  service up `pwd`/ddekittest_driver  -config system.conf \
+  minix-service up `pwd`/ddekittest_driver  -config system.conf \
 	-script /etc/rs.single -label ddekittest
 }
 
@@ -16,4 +16,4 @@ run_ddekittest () {
 #
 run_ddekittest
 sleep 10
-service down ddekittest
+minix-service down ddekittest
diff --git a/minix/tests/ds/run b/minix/tests/ds/run
index bdb0b309c..b6857a46e 100644
--- a/minix/tests/ds/run
+++ b/minix/tests/ds/run
@@ -2,6 +2,6 @@
 
 PWD=`pwd`
 
-service up ${PWD}/subs -config system.conf -script /etc/rs.single
-service up ${PWD}/dstest -config system.conf -script /etc/rs.single
-service down subs
+minix-service up ${PWD}/subs -config system.conf -script /etc/rs.single
+minix-service up ${PWD}/dstest -config system.conf -script /etc/rs.single
+minix-service down subs
diff --git a/minix/tests/fbdtest/test.sh b/minix/tests/fbdtest/test.sh
index 0d2c79553..81917d17b 100755
--- a/minix/tests/fbdtest/test.sh
+++ b/minix/tests/fbdtest/test.sh
@@ -82,11 +82,11 @@ read_test() {
   EXP=$2
   shift 2
   $RWBLOCKS $DEV $PAT
-  service up /service/fbd -dev /dev/fbd -args "$PAIR" || exit 1
+  minix-service up /service/fbd -dev /dev/fbd -args "$PAIR" || exit 1
   fbdctl add $@ >/dev/null
   #fbdctl list
   RES="`$RWBLOCKS /dev/fbd`"
-  service down fbd
+  minix-service down fbd
   echo -n "$RES: "
   if echo "$RES" | egrep "^$EXP\$" >/dev/null 2>&1; then
     if [ "$OPT" = "-last" -a "$RES" != "$LAST" ]; then
@@ -115,11 +115,11 @@ write_test() {
   WS=$3
   shift 3
   $RWBLOCKS $DEV UUUUUUUUUUUUUUUU
-  service up /service/fbd -dev /dev/fbd -args "$PAIR" || exit 1
+  minix-service up /service/fbd -dev /dev/fbd -args "$PAIR" || exit 1
   fbdctl add $@ >/dev/null
   #fbdctl list
   $RWBLOCKS /dev/fbd $PAT $WS
-  service down fbd
+  minix-service down fbd
   RES="`$RWBLOCKS $DEV`"
   echo -n "$RES: "
   if echo "$RES" | egrep "^$EXP\$" >/dev/null 2>&1; then
diff --git a/minix/tests/kernel/sys_padconf/run b/minix/tests/kernel/sys_padconf/run
index c47743c69..2f14d15fa 100755
--- a/minix/tests/kernel/sys_padconf/run
+++ b/minix/tests/kernel/sys_padconf/run
@@ -3,7 +3,7 @@
 make >/dev/null
 
 echo -n "Kernel test (sys_padconf): "
-service up `pwd`/padconftest -config system.conf -label padconftest -script /etc/rs.single
+minix-service up `pwd`/padconftest -config system.conf -label padconftest -script /etc/rs.single
 r=$?
 
 if [ $r -ne 0 ]; then
diff --git a/minix/tests/kernel/sys_vumap/run b/minix/tests/kernel/sys_vumap/run
index 18de72e8d..8270bf760 100755
--- a/minix/tests/kernel/sys_vumap/run
+++ b/minix/tests/kernel/sys_vumap/run
@@ -3,10 +3,10 @@
 make >/dev/null
 
 echo -n "Kernel test (sys_vumap): "
-service up `pwd`/vumaprelay -config system.conf -label vumaprelay -script /etc/rs.single
-service up `pwd`/vumaptest -config system.conf -script /etc/rs.single 2>/dev/null
+minix-service up `pwd`/vumaprelay -config system.conf -label vumaprelay -script /etc/rs.single
+minix-service up `pwd`/vumaptest -config system.conf -script /etc/rs.single 2>/dev/null
 r=$?
-service down vumaprelay
+minix-service down vumaprelay
 
 if [ $r -ne 0 ]; then
   echo "failure"
diff --git a/minix/tests/safecopy/down b/minix/tests/safecopy/down
index 6ca8abe02..ae162382a 100755
--- a/minix/tests/safecopy/down
+++ b/minix/tests/safecopy/down
@@ -1,5 +1,5 @@
 #!/bin/sh
 
-service down grantor
-service down requestor
+minix-service down grantor
+minix-service down requestor
 
diff --git a/minix/tests/safecopy/run b/minix/tests/safecopy/run
index 1067ef75c..e7245c712 100755
--- a/minix/tests/safecopy/run
+++ b/minix/tests/safecopy/run
@@ -2,6 +2,6 @@
 
 PWD=`pwd`
 
-service up ${PWD}/grantor -config ${PWD}/system.conf -script ${PWD}/down
-service up ${PWD}/requestor -config ${PWD}/system.conf -script ${PWD}/down
+minix-service up ${PWD}/grantor -config ${PWD}/system.conf -script ${PWD}/down
+minix-service up ${PWD}/requestor -config ${PWD}/system.conf -script ${PWD}/down
 
diff --git a/minix/tests/test73.c b/minix/tests/test73.c
index 8d08b4013..dc4a3b28f 100644
--- a/minix/tests/test73.c
+++ b/minix/tests/test73.c
@@ -68,14 +68,14 @@ main(int argc, char *argv[])
 
 	/* stop residual testvm service if any */
 	snprintf(cmdline, sizeof(cmdline), "%s down testvm >/dev/null 2>&1",
-		_PATH_SERVICE);
+		_PATH_MINIX_SERVICE);
 	if(system(cmdline) < 0) { e(9); exit(1); }
 
 	/* start the testvm service */
 	snprintf(cmdline, sizeof(cmdline),
 		"%s up /%s/../testvm -script /etc/rs.single "
 		"-args /%s/%s -config %s/../testvm.conf",
-			_PATH_SERVICE, cwd, cwd, pipefn, cwd);
+			_PATH_MINIX_SERVICE, cwd, cwd, pipefn, cwd);
 	if(system(cmdline) < 0) { e(10); exit(1); }
 
 	/* don't hang forever if the open or read block */
diff --git a/minix/tests/testrelpol.sh b/minix/tests/testrelpol.sh
index f58a79660..0865c1f28 100755
--- a/minix/tests/testrelpol.sh
+++ b/minix/tests/testrelpol.sh
@@ -93,7 +93,7 @@ prepare_service() {
 	echo $flags | grep -q 'r' || return 0
 	echo $flags | grep -q 'R' && return 0
 
-	service clone $label
+	minix-service clone $label
 	return 1
 }
 
@@ -102,7 +102,7 @@ cleanup_service() {
 
 	label=$1
 
-	service unclone $label
+	minix-service unclone $label
 }
 
 #######################################################################
@@ -120,7 +120,7 @@ pol_restart() {
 	restarts_pre=$(get_value restarts ${service})
 	endpoint_pre=$(get_value endpoint ${service})
 
-	service fi ${label}
+	minix-service fi ${label}
 	if ! wait_for_service ${service} ${restarts_pre}
 	then
 		echo not ok
@@ -154,7 +154,7 @@ pol_reset() {
 	restarts_pre=$(get_value restarts ${service})
 	endpoint_pre=$(get_value endpoint ${service})
 
-	service fi ${label}
+	minix-service fi ${label}
 	if ! wait_for_service ${service} ${restarts_pre}
 	then
 		echo not ok
@@ -187,7 +187,7 @@ lu_test_one() {
 	lu_maxtime=${lu_maxtime:-3HZ}
 	lu_state=${lu_state:-1}
 
-	service ${lu_opts} update ${prog} -label ${label} -maxtime ${lu_maxtime} -state ${lu_state}
+	minix-service ${lu_opts} update ${prog} -label ${label} -maxtime ${lu_maxtime} -state ${lu_state}
 	if [ $? -ne $result ]
 	then
 		return 1
@@ -271,18 +271,18 @@ multi_lu_test_one() {
 
 			if [ $index -eq $once_index ]
 			then
-				service ${lu_opts_once} -q update self \
+				minix-service ${lu_opts_once} -q update self \
 					-label ${label} \
 					-maxtime ${lu_maxtime_once} \
 					-state ${lu_state_once} || ret=2
 			else
-				service ${lu_opts} -q update self \
+				minix-service ${lu_opts} -q update self \
 					-label ${label} \
 					-maxtime ${lu_maxtime} \
 					-state ${lu_state} || ret=2
 			fi
 		done
-		service sysctl upd_run
+		minix-service sysctl upd_run
 		result=$?
 
 		# We may experience transient failures as a result of services
diff --git a/minix/tests/testrmib.sh b/minix/tests/testrmib.sh
index 3bd8c06f4..e32cb3dfc 100755
--- a/minix/tests/testrmib.sh
+++ b/minix/tests/testrmib.sh
@@ -12,7 +12,7 @@
 
 bomb() {
   echo $*
-  service down rmibtest 2>/dev/null
+  minix-service down rmibtest 2>/dev/null
   exit 1
 }
 
@@ -29,7 +29,7 @@ old_nodes=`sysctl -n minix.mib.nodes 2>/dev/null` || bomb "no MIB stats?"
 old_objects=`sysctl -n minix.mib.objects 2>/dev/null` || bomb "no MIB stats?"
 old_remotes=`sysctl -n minix.mib.remotes 2>/dev/null` || bomb "no MIB stats?"
 
-service up `pwd`/rmibtest -label rmibtest -config rmibtest.conf || \
+minix-service up `pwd`/rmibtest -label rmibtest -config rmibtest.conf || \
   bomb "unable to start test service"
 
 cd ..
@@ -55,7 +55,7 @@ sysctl -wq minix.rtest.func=7895375 || bomb "unable to set func value"
 # Test the minix.test shadowing subtree using a subset of the regular MIB test
 ./test87 19 >/dev/null || bomb "test87 reported failure"
 
-service down rmibtest
+minix-service down rmibtest
 
 sleep 1
 
diff --git a/minix/tests/testvnd.sh b/minix/tests/testvnd.sh
index cbc13451e..e60f8dae6 100755
--- a/minix/tests/testvnd.sh
+++ b/minix/tests/testvnd.sh
@@ -32,7 +32,7 @@ if vndconfig -l vnd0 >/dev/null 2>&1; then
     echo "ok"
     exit 0
   else
-    service down vnd0
+    minix-service down vnd0
   fi
 fi
 if vndconfig -l vnd1 >/dev/null 2>&1; then
@@ -41,7 +41,7 @@ if vndconfig -l vnd1 >/dev/null 2>&1; then
     echo "ok"
     exit 0
   else
-    service down vnd1
+    minix-service down vnd1
   fi
 fi
 
diff --git a/usr.sbin/vnconfig/vnconfig.c b/usr.sbin/vnconfig/vnconfig.c
index 6d9006b76..7e3b2ab35 100644
--- a/usr.sbin/vnconfig/vnconfig.c
+++ b/usr.sbin/vnconfig/vnconfig.c
@@ -149,7 +149,7 @@ start_service(char *dev)
 
 	snprintf(cmd, sizeof(cmd),
 	    "%s up %s/vnd -label vnd%u -args instance=%u -dev %s",
-	    _PATH_SERVICE, _PATH_DRIVERS, n, n, dev);
+	    _PATH_MINIX_SERVICE, _PATH_DRIVERS, n, n, dev);
 
 	status = system(cmd);
 
@@ -183,8 +183,8 @@ stop_service(int fd, char *dev)
 		if (verbose)
 			printf("%s: stopping driver\n", dev);
 
-		snprintf(cmd, sizeof(cmd), "%s down vnd%u", _PATH_SERVICE,
-		    vnu.vnu_unit);
+		snprintf(cmd, sizeof(cmd), "%s down vnd%u",
+		    _PATH_MINIX_SERVICE, vnu.vnu_unit);
 
 		system(cmd);
 	}