From: Thomas Veerman Date: Tue, 8 Jan 2013 12:02:38 +0000 (+0100) Subject: ARM: fix clock X-Git-Tag: v3.2.1~121 X-Git-Url: http://zhaoyanbai.com/repos/%24relpath%24tabs.css?a=commitdiff_plain;h=c77228c77beaa3299c51542a0674aa9645766e9a;p=minix.git ARM: fix clock The GPTIMER1 clock is configured to run at 32 kHz and generate (overflow) interrupts every 1 ms. However, the Timer Overflow Wrappping Register (TOWR) was configured to filter every other interrupt. This caused to the internal 'realtime' value to be off. --- diff --git a/kernel/arch/arm/omap_timer.c b/kernel/arch/arm/omap_timer.c index 4821d2a19..f106dc092 100644 --- a/kernel/arch/arm/omap_timer.c +++ b/kernel/arch/arm/omap_timer.c @@ -23,23 +23,24 @@ int omap3_register_timer_handler(const irq_handler_t handler) void omap3_timer_init(unsigned freq) { + u32_t tisr; + /* Stop timer */ mmio_clear(OMAP3_GPTIMER1_TCLR, OMAP3_TCLR_ST); /* Use 32 KHz clock source for GPTIMER1 */ mmio_clear(OMAP3_CM_CLKSEL_WKUP, OMAP3_CLKSEL_GPT1); - /* Use 1-ms tick mode for GPTIMER1 */ + /* Use 1-ms tick mode for GPTIMER1 TRM 16.2.4.2.1 */ mmio_write(OMAP3_GPTIMER1_TPIR, 232000); mmio_write(OMAP3_GPTIMER1_TNIR, -768000); mmio_write(OMAP3_GPTIMER1_TLDR, 0xffffffe0); mmio_write(OMAP3_GPTIMER1_TCRR, 0xffffffe0); - /* Set frequency */ - mmio_write(OMAP3_GPTIMER1_TOWR, TIMER_COUNT(freq)); - /* Set up overflow interrupt */ - mmio_write(OMAP3_GPTIMER1_TISR, ~0); + tisr = OMAP3_TISR_MAT_IT_FLAG | OMAP3_TISR_OVF_IT_FLAG | + OMAP3_TISR_TCAR_IT_FLAG; + mmio_write(OMAP3_GPTIMER1_TISR, tisr); /* Clear interrupt status */ mmio_write(OMAP3_GPTIMER1_TIER, OMAP3_TIER_OVF_IT_ENA); omap3_irq_unmask(OMAP3_GPT1_IRQ); @@ -55,8 +56,12 @@ void omap3_timer_stop() void omap3_timer_int_handler() { - /* Clear the interrupt */ - mmio_write(OMAP3_GPTIMER1_TISR, ~0); + /* Clear all interrupts */ + u32_t tisr; + + tisr = OMAP3_TISR_MAT_IT_FLAG | OMAP3_TISR_OVF_IT_FLAG | + OMAP3_TISR_TCAR_IT_FLAG; + mmio_write(OMAP3_GPTIMER1_TISR, tisr); tsc++; }