From: acevest <zhaoyanbai@126.com>
Date: Mon, 13 May 2024 11:11:27 +0000 (+0800)
Subject: 硬盘PIO_EXT读支持一次读多个扇区
X-Git-Url: http://zhaoyanbai.com/repos/%22http:/www.isc.org/icons/zpipe.c?a=commitdiff_plain;h=988d2d5672659093fa04675577f339a277ef4d88;p=kernel.git

硬盘PIO_EXT读支持一次读多个扇区
---

diff --git a/drivers/ata.c b/drivers/ata.c
index fca0bba..3e22617 100644
--- a/drivers/ata.c
+++ b/drivers/ata.c
@@ -71,6 +71,7 @@ void ata_read_identity_string(const uint16_t *identify, int bgn, int end, char *
     buf[i] = 0;
 }
 
+uint16_t max_sectors_per_transfer = 0;
 // 《AT Attachment 8 - ATA/ATAPI Command Set》
 void ide_ata_init() {
     for (int i = 0; i < MAX_IDE_DRIVE_CNT; i++) {
@@ -205,6 +206,8 @@ void ide_ata_init() {
             // 低8位0x00代表Reserved，0x01~0xFF代表每次最大传输扇区数
             printk("A: %04x\n", identify[47]);  // 高 8 位保留，低 8 位表示最大扇区数
 
+            max_sectors_per_transfer = identify[47];
+
             // 第8位为1表示多扇区设置有效
             // 当前设置的一次传送的扇区数
             printk("B: %04x\n", identify[59]);
@@ -473,6 +476,8 @@ int ata_dma_stop(int channel) {
 
 // ATA_CMD_READ_PIO_EXT
 int ata_pio_read_ext(int drv, uint64_t pos, uint16_t count) {
+    assert(count <= max_sectors_per_transfer);
+
     // 不再设置nIEN，需要中断
     outb(0x00, REG_CTL(drv));
 
@@ -504,7 +509,7 @@ int ata_pio_read_ext(int drv, uint64_t pos, uint16_t count) {
         nop();
     }
 
-    outb(ATA_CMD_READ_PIO_EXT, REG_CMD(drv));
+    outb(ATA_CMD_READ_MULTIPLE_EXT, REG_CMD(drv));
 
     return 0;
 }
diff --git a/drivers/ata.h b/drivers/ata.h
index e62aee3..9cec84a 100644
--- a/drivers/ata.h
+++ b/drivers/ata.h
@@ -71,21 +71,27 @@ extern unsigned int IDE_CHL1_CTL_BASE;
 #define ATA_STATUS_ERR 0x01       /* error */
 
 #define ATA_CMD_IDLE 0x00
+#define ATA_CMD_DEVICE_RESET 0x08
 #define ATA_CMD_RECALIBRATE 0x10
 #define ATA_CMD_READ_PIO 0x20     /* read data */
 #define ATA_CMD_READ_PIO_EXT 0x24 /* read data (LBA-48 bit)*/
 #define ATA_CMD_READ_DMA 0xC8
 #define ATA_CMD_READ_DMA_EXT 0x25 /* read data DMA LBA48 */
+#define ATA_CMD_READ_MULTIPLE_EXT 0x29
 #define ATA_CMD_WRITE_PIO 0x30
 #define ATA_CMD_WRITE_PIO_EXT 0x34
 #define ATA_CMD_WRITE_DMA 0xCA
 #define ATA_CMD_WRITE_DMA_EXT 0X35
+#define ATA_CMD_WRITE_MULTIPLE_EXT 0x37
 #define ATA_CMD_READ_VERIFY 0x40
 #define ATA_CMD_FORMAT 0x50
 #define ATA_CMD_SEEK 0x70
 #define ATA_CMD_DIAG 0x90
 #define ATA_CMD_SPECIFY 0x91
 #define ATA_CMD_IDENTIFY_PACKET 0xA1
+#define ATA_CMD_READ_MULTIPLE 0xC4
+#define ATA_CMD_WRITE_MULTIPLE 0xC5
+#define ATA_CMD_SET_MULTIPLE_MODE 0xC6
 #define ATA_CMD_IDENTIFY 0xEC
 
 #define ATA_CTL 0
diff --git a/gdbscript b/gdbscript
index d5fe482..89fe90e 100644
--- a/gdbscript
+++ b/gdbscript
@@ -18,6 +18,8 @@ target remote localhost:1234
 
 set pagination off
 
+#b task_disk.c:97
+
 #b init_serial
 
 #b init_system_info
diff --git a/kernel/task_disk.c b/kernel/task_disk.c
index 59bde4a..0cdb866 100644
--- a/kernel/task_disk.c
+++ b/kernel/task_disk.c
@@ -101,6 +101,7 @@ void disk_task_entry(void *arg) {
 #if !DISK_DMA_MODE
         // 对于PIO的方式来说，一次只能操作一个扇区，所以有几个扇区就要重试几次
         send_cmd_times = r->count;
+        send_cmd_times = 1;
 #endif
         for (int count = 0; count < send_cmd_times; count++) {
             switch (r->command) {
@@ -114,9 +115,9 @@ void disk_task_entry(void *arg) {
                 assert(r->buf != NULL || r->bb->data != NULL);
 #if !DISK_DMA_MODE
                 if (r->bb != 0) {
-                    ata_pio_read_ext(drv_no, pos + count, 1);
+                    ata_pio_read_ext(drv_no, pos + count, r->count);
                 } else {
-                    ata_pio_read_ext(drv_no, pos + count, 1);
+                    ata_pio_read_ext(drv_no, pos + count, r->count);
                 }
 #else
                 if (r->bb != 0) {
@@ -141,9 +142,9 @@ void disk_task_entry(void *arg) {
             if (DISK_REQ_READ == r->command || DISK_REQ_IDENTIFY == r->command) {
                 uint32_t offset = SECT_SIZE * count;
                 if (r->bb != 0) {
-                    ata_pio_read_data(drv_no, 1, r->bb->data + offset);
+                    ata_pio_read_data(drv_no, r->count, r->bb->data + offset);
                 } else {
-                    ata_pio_read_data(drv_no, 1, r->buf + offset);
+                    ata_pio_read_data(drv_no, r->count, r->buf + offset);
                 }
             }