From: David van Moolenbroek Date: Mon, 1 Dec 2014 17:00:04 +0000 (+0000) Subject: e1000: convert to KNF X-Git-Url: http://zhaoyanbai.com/repos/%22http:/www.isc.org/icons/zpipe.c?a=commitdiff_plain;h=107df7c8fabf2d51ba8e0606ed44abc6d487523f;p=minix.git e1000: convert to KNF Change-Id: Ibd156c2e0a58fed70895080d4b230b26c500fa11 --- diff --git a/minix/drivers/net/e1000/e1000.c b/minix/drivers/net/e1000/e1000.c index 8ec80313c..367200ff0 100644 --- a/minix/drivers/net/e1000/e1000.c +++ b/minix/drivers/net/e1000/e1000.c @@ -1,9 +1,4 @@ -/** - * @file e1000.c - * - * @brief This file contains a device driver for Intel Pro/1000 - * Gigabit Ethernet Controllers. - */ +/* A device driver for Intel Pro/1000 Gigabit Ethernet Controllers. */ #include #include @@ -44,7 +39,7 @@ static void e1000_reg_unset(e1000_t *e, uint32_t reg, uint32_t value); static u16_t eeprom_eerd(void *e, int reg); static u16_t eeprom_ich(void *e, int reg); static int eeprom_ich_init(e1000_t *e); -static int eeprom_ich_cycle(const e1000_t *e, u32_t timeout); +static int eeprom_ich_cycle(e1000_t *e, u32_t timeout); static void reply(e1000_t *e); static void mess_reply(message *req, message *reply); @@ -53,1156 +48,1054 @@ static void sef_local_startup(void); static int sef_cb_init_fresh(int type, sef_init_info_t *info); static void sef_cb_signal_handler(int signo); -/*===========================================================================* - * main * - *===========================================================================*/ -int main(int argc, char *argv[]) +/* + * The e1000 driver. + */ +int +main(int argc, char * argv[]) { - message m; - int ipc_status; - int r; - - /* SEF local startup. */ - env_setargs(argc, argv); - sef_local_startup(); - - /* - * Enter the main driver loop. - */ - while (TRUE) - { - if ((r= netdriver_receive(ANY, &m, &ipc_status)) != OK) - { - panic("netdriver_receive failed: %d", r); - } + message m; + int ipc_status; + int r; - if (is_ipc_notify(ipc_status)) - { - switch (_ENDPOINT_P(m.m_source)) - { - case HARDWARE: - e1000_interrupt(&m); - break; - - case CLOCK: - break; - } - continue; - } - switch (m.m_type) - { - case DL_WRITEV_S: e1000_writev_s(&m, FALSE); break; - case DL_READV_S: e1000_readv_s(&m, FALSE); break; - case DL_CONF: e1000_init(&m); break; - case DL_GETSTAT_S: e1000_getstat_s(&m); break; - default: - panic("illegal message: %d", m.m_type); + /* SEF local startup. */ + env_setargs(argc, argv); + sef_local_startup(); + + /* + * Enter the main driver loop. + */ + while (TRUE) { + if ((r = netdriver_receive(ANY, &m, &ipc_status)) != OK) + panic("netdriver_receive failed: %d", r); + + if (is_ipc_notify(ipc_status)) { + switch (_ENDPOINT_P(m.m_source)) { + case HARDWARE: + e1000_interrupt(&m); + break; + } + + continue; + } + + switch (m.m_type) { + case DL_WRITEV_S: e1000_writev_s(&m, FALSE); break; + case DL_READV_S: e1000_readv_s(&m, FALSE); break; + case DL_CONF: e1000_init(&m); break; + case DL_GETSTAT_S: e1000_getstat_s(&m); break; + default: panic("illegal message: %d", m.m_type); + } } - } } -/*===========================================================================* - * sef_local_startup * - *===========================================================================*/ -static void sef_local_startup() +/* + * Perform SEF initialization. + */ +static void +sef_local_startup(void) { - /* Register init callbacks. */ - sef_setcb_init_fresh(sef_cb_init_fresh); - sef_setcb_init_lu(sef_cb_init_fresh); - sef_setcb_init_restart(sef_cb_init_fresh); - /* Register live update callbacks. */ - sef_setcb_lu_prepare(sef_cb_lu_prepare_always_ready); - sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid_workfree); + /* Register init callbacks. */ + sef_setcb_init_fresh(sef_cb_init_fresh); + sef_setcb_init_lu(sef_cb_init_fresh); + sef_setcb_init_restart(sef_cb_init_fresh); - /* Register signal callbacks. */ - sef_setcb_signal_handler(sef_cb_signal_handler); + /* Register live update callbacks. */ + sef_setcb_lu_prepare(sef_cb_lu_prepare_always_ready); + sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid_workfree); - /* Let SEF perform startup. */ - sef_startup(); + /* Register signal callbacks. */ + sef_setcb_signal_handler(sef_cb_signal_handler); + + /* Let SEF perform startup. */ + sef_startup(); } -/*===========================================================================* - * sef_cb_init_fresh * - *===========================================================================*/ -static int sef_cb_init_fresh(int UNUSED(type), sef_init_info_t *UNUSED(info)) +/* + * Initialize the e1000 driver. + */ +static int +sef_cb_init_fresh(int __unused type, sef_init_info_t * __unused info) { -/* Initialize the e1000 driver. */ - long v; - int r; + long v; + int r; - v = 0; - (void) env_parse("instance", "d", 0, &v, 0, 255); - e1000_instance = (int) v; + v = 0; + (void)env_parse("instance", "d", 0, &v, 0, 255); + e1000_instance = (int) v; - /* Clear state. */ - memset(&e1000_state, 0, sizeof(e1000_state)); + /* Clear state. */ + memset(&e1000_state, 0, sizeof(e1000_state)); - /* Perform calibration. */ - if((r = tsc_calibrate()) != OK) - { - panic("tsc_calibrate failed: %d", r); - } + /* Perform calibration. */ + if ((r = tsc_calibrate()) != OK) + panic("tsc_calibrate failed: %d", r); - /* Announce we are up! */ - netdriver_announce(); + /* Announce we are up! */ + netdriver_announce(); - return(OK); + return OK; } -/*===========================================================================* - * sef_cb_signal_handler * - *===========================================================================*/ -static void sef_cb_signal_handler(int signo) +/* + * Process a signal. + */ +static void +sef_cb_signal_handler(int signo) { - e1000_t *e; - e = &e1000_state; + e1000_t *e; + + e = &e1000_state; - E1000_DEBUG(3, ("%s: got signal\n", e->name)); + E1000_DEBUG(3, ("%s: got signal\n", e->name)); - /* Only check for termination signal, ignore anything else. */ - if (signo != SIGTERM) return; + /* Only check for termination signal, ignore anything else. */ + if (signo != SIGTERM) return; - e1000_stop(e); + e1000_stop(e); } -/*===========================================================================* - * e1000_init * - *===========================================================================*/ -static void e1000_init(message *mp) +/* + * Process a configuration message from Inet. + */ +static void +e1000_init(message * mp) { - static int first_time = 1; - message reply_mess; - e1000_t *e; - - E1000_DEBUG(3, ("e1000: init()\n")); - - /* Configure PCI devices, if needed. */ - if (first_time) - { - first_time = 0; - e1000_init_pci(); - } - e = &e1000_state; - - /* Initialize hardware, if needed. */ - if (!(e->status & E1000_ENABLED) && !(e1000_init_hw(e))) - { - reply_mess.m_type = DL_CONF_REPLY; - reply_mess.m_netdrv_net_dl_conf.stat = ENXIO; - mess_reply(mp, &reply_mess); - return; - } - /* Reply back to INET. */ - reply_mess.m_type = DL_CONF_REPLY; - reply_mess.m_netdrv_net_dl_conf.stat = OK; - memcpy(reply_mess.m_netdrv_net_dl_conf.hw_addr, e->address.ea_addr, + static int first_time = 1; + message reply_mess; + e1000_t *e; + + E1000_DEBUG(3, ("e1000: init()\n")); + + /* Configure PCI devices, if needed. */ + if (first_time) { + first_time = 0; + e1000_init_pci(); + } + + e = &e1000_state; + + /* Initialize hardware, if needed. */ + if (!(e->status & E1000_ENABLED) && !(e1000_init_hw(e))) { + reply_mess.m_type = DL_CONF_REPLY; + reply_mess.m_netdrv_net_dl_conf.stat = ENXIO; + mess_reply(mp, &reply_mess); + return; + } + + /* Reply back to INET. */ + reply_mess.m_type = DL_CONF_REPLY; + reply_mess.m_netdrv_net_dl_conf.stat = OK; + memcpy(reply_mess.m_netdrv_net_dl_conf.hw_addr, e->address.ea_addr, sizeof(reply_mess.m_netdrv_net_dl_conf.hw_addr)); - mess_reply(mp, &reply_mess); + mess_reply(mp, &reply_mess); } -/*===========================================================================* - * e1000_int_pci * - *===========================================================================*/ -static void e1000_init_pci() +/* + * Find a matching PCI device. + */ +static void +e1000_init_pci(void) { - e1000_t *e; + e1000_t *e; + + /* Initialize the PCI bus. */ + pci_init(); - /* Initialize the PCI bus. */ - pci_init(); + /* Try to detect e1000 cards. */ + e = &e1000_state; + strlcpy(e->name, "e1000#0", sizeof(e->name)); + e->name[6] += e1000_instance; - /* Try to detect e1000's. */ - e = &e1000_state; - strlcpy(e->name, "e1000#0", sizeof(e->name)); - e->name[6] += e1000_instance; - e1000_probe(e, e1000_instance); + e1000_probe(e, e1000_instance); } -/*===========================================================================* - * e1000_probe * - *===========================================================================*/ -static int e1000_probe(e1000_t *e, int skip) +/* + * Find a matching device. Return TRUE on success. + */ +static int +e1000_probe(e1000_t * e, int skip) { - int r, devind, ioflag; - u16_t vid, did, cr; - u32_t status[2]; - u32_t base, size; - u32_t gfpreg, sector_base_addr; - char *dname; - - E1000_DEBUG(3, ("%s: probe()\n", e->name)); - - /* - * Attempt to iterate the PCI bus. Start at the beginning. - */ - if ((r = pci_first_dev(&devind, &vid, &did)) == 0) - { - return FALSE; - } - /* Loop devices on the PCI bus. */ - while (skip--) - { - E1000_DEBUG(3, ("%s: probe() devind %d vid 0x%x did 0x%x\n", - e->name, devind, vid, did)); - - if (!(r = pci_next_dev(&devind, &vid, &did))) - { - return FALSE; + int r, devind, ioflag; + u16_t vid, did, cr; + u32_t status[2]; + u32_t base, size; + size_t flash_size; + u32_t gfpreg, sector_base_addr; + char *dname; + + E1000_DEBUG(3, ("%s: probe()\n", e->name)); + + /* Attempt to iterate the PCI bus. Start at the beginning. */ + if ((r = pci_first_dev(&devind, &vid, &did)) == 0) + return FALSE; + + /* Loop devices on the PCI bus. */ + while (skip--) { + E1000_DEBUG(3, ("%s: probe() devind %d vid 0x%x did 0x%x\n", + e->name, devind, vid, did)); + + if (!(r = pci_next_dev(&devind, &vid, &did))) + return FALSE; } - } - /* - * Successfully detected an Intel Pro/1000 on the PCI bus. - */ - e->status |= E1000_DETECTED; - e->eeprom_read = eeprom_eerd; - - /* - * Set card specific properties. - */ - switch (did) - { - case E1000_DEV_ID_ICH10_D_BM_LM: - case E1000_DEV_ID_ICH10_R_BM_LF: - e->eeprom_read = eeprom_ich; - break; - - case E1000_DEV_ID_82540EM: + + /* We found a matching card. Set card-specific properties. */ + e->status |= E1000_DETECTED; + e->eeprom_read = eeprom_eerd; + + switch (did) { + case E1000_DEV_ID_ICH10_D_BM_LM: + case E1000_DEV_ID_ICH10_R_BM_LF: + e->eeprom_read = eeprom_ich; + break; + + case E1000_DEV_ID_82540EM: case E1000_DEV_ID_82545EM: - e->eeprom_done_bit = (1 << 4); - e->eeprom_addr_off = 8; - break; + e->eeprom_done_bit = (1 << 4); + e->eeprom_addr_off = 8; + break; default: - e->eeprom_done_bit = (1 << 1); - e->eeprom_addr_off = 2; - break; - } - - /* Inform the user about the new card. */ - if (!(dname = pci_dev_name(vid, did))) - { - dname = "Intel Pro/1000 Gigabit Ethernet Card"; - } - E1000_DEBUG(1, ("%s: %s (%04x/%04x/%02x) at %s\n", - e->name, dname, vid, did, e->revision, - pci_slot_name(devind))); - - /* Reserve PCI resources found. */ - if ((r = pci_reserve_ok(devind)) != OK) - { - panic("failed to reserve PCI device: %d", r); - } - /* Read PCI configuration. */ - e->irq = pci_attr_r8(devind, PCI_ILR); - - if ((r = pci_get_bar(devind, PCI_BAR, &base, &size, &ioflag)) != OK) - panic("failed to get PCI BAR (%d)", r); - if (ioflag) panic("PCI BAR is not for memory"); - - e->regs = vm_map_phys(SELF, (void *) base, size); - if (e->regs == (u8_t *) -1) { + e->eeprom_done_bit = (1 << 1); + e->eeprom_addr_off = 2; + break; + } + + /* Inform the user about the new card. */ + if (!(dname = pci_dev_name(vid, did))) + dname = "Intel Pro/1000 Gigabit Ethernet Card"; + E1000_DEBUG(1, ("%s: %s (%04x/%04x/%02x) at %s\n", + e->name, dname, vid, did, e->revision, pci_slot_name(devind))); + + /* Reserve PCI resources found. */ + if ((r = pci_reserve_ok(devind)) != OK) + panic("failed to reserve PCI device: %d", r); + + /* Read PCI configuration. */ + e->irq = pci_attr_r8(devind, PCI_ILR); + + if ((r = pci_get_bar(devind, PCI_BAR, &base, &size, &ioflag)) != OK) + panic("failed to get PCI BAR: %d", r); + if (ioflag) + panic("PCI BAR is not for memory"); + + if ((e->regs = vm_map_phys(SELF, (void *)base, size)) == MAP_FAILED) panic("failed to map hardware registers from PCI"); - } - /* FIXME: enable DMA bus mastering if necessary. This is disabled by - * default on VMware. Eventually, the PCI driver should deal with this. - */ - cr = pci_attr_r16(devind, PCI_CR); - if (!(cr & PCI_CR_MAST_EN)) + /* Enable DMA bus mastering if necessary. */ + cr = pci_attr_r16(devind, PCI_CR); + if (!(cr & PCI_CR_MAST_EN)) pci_attr_w16(devind, PCI_CR, cr | PCI_CR_MAST_EN); - /* Optionally map flash memory. */ - if (did != E1000_DEV_ID_82540EM && - did != E1000_DEV_ID_82545EM && - did != E1000_DEV_ID_82540EP && - pci_attr_r32(devind, PCI_BAR_2)) - { - size_t flash_size; - - /* 82566/82567/82562V series support mapping 4kB of flash memory */ - switch(did) - { - case E1000_DEV_ID_ICH10_D_BM_LM: - case E1000_DEV_ID_ICH10_R_BM_LF: - flash_size = 0x1000; - break; - default: - flash_size = 0x10000; - } - - if ((e->flash = vm_map_phys(SELF, - (void *) pci_attr_r32(devind, PCI_BAR_2), - flash_size)) == MAP_FAILED) { - panic("e1000: couldn't map in flash."); - } - - gfpreg = E1000_READ_FLASH_REG(e, ICH_FLASH_GFPREG); - /* - * sector_base_addr is a "sector"-aligned address (4096 bytes) - */ - sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; - - /* flash_base_addr is byte-aligned */ - e->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT; - } - /* - * Output debug information. - */ - status[0] = e1000_reg_read(e, E1000_REG_STATUS); - E1000_DEBUG(3, ("%s: MEM at %p, IRQ %d\n", - e->name, e->regs, e->irq)); - E1000_DEBUG(3, ("%s: link %s, %s duplex\n", - e->name, status[0] & 3 ? "up" : "down", - status[0] & 1 ? "full" : "half")); - return TRUE; + /* Optionally map flash memory. */ + if (did != E1000_DEV_ID_82540EM && did != E1000_DEV_ID_82545EM && + did != E1000_DEV_ID_82540EP && pci_attr_r32(devind, PCI_BAR_2)) { + /* + * 82566/82567/82562V series support mapping 4kB of flash + * memory. + */ + switch (did) { + case E1000_DEV_ID_ICH10_D_BM_LM: + case E1000_DEV_ID_ICH10_R_BM_LF: + flash_size = 0x1000; + break; + default: + flash_size = 0x10000; + } + + if ((e->flash = vm_map_phys(SELF, + (void *)pci_attr_r32(devind, PCI_BAR_2), + flash_size)) == MAP_FAILED) + panic("e1000: couldn't map in flash"); + + /* + * sector_base_addr is a "sector"-aligned address (4096 bytes) + */ + gfpreg = E1000_READ_FLASH_REG(e, ICH_FLASH_GFPREG); + sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; + + /* flash_base_addr is byte-aligned */ + e->flash_base_addr = + sector_base_addr << FLASH_SECTOR_ADDR_SHIFT; + } + + /* Output debug information. */ + status[0] = e1000_reg_read(e, E1000_REG_STATUS); + E1000_DEBUG(3, ("%s: MEM at %p, IRQ %d\n", e->name, e->regs, e->irq)); + E1000_DEBUG(3, ("%s: link %s, %s duplex\n", e->name, + status[0] & 3 ? "up" : "down", status[0] & 1 ? "full" : "half")); + + return TRUE; } -/*===========================================================================* - * e1000_init_hw * - *===========================================================================*/ -static int e1000_init_hw(e) -e1000_t *e; +/* + * Initialize the hardware. + */ +static int +e1000_init_hw(e1000_t * e) { - int r, i; - - e->status |= E1000_ENABLED; - e->irq_hook = e->irq; - - /* - * Set the interrupt handler and policy. Do not automatically - * re-enable interrupts. Return the IRQ line number on interrupts. - */ - if ((r = sys_irqsetpolicy(e->irq, 0, &e->irq_hook)) != OK) - { - panic("sys_irqsetpolicy failed: %d", r); - } - if ((r = sys_irqenable(&e->irq_hook)) != OK) - { - panic("sys_irqenable failed: %d", r); - } - /* Reset hardware. */ - e1000_reset_hw(e); - - /* - * Initialize appropriately, according to section 14.3 General Configuration - * of Intel's Gigabit Ethernet Controllers Software Developer's Manual. - */ - e1000_reg_set(e, E1000_REG_CTRL, E1000_REG_CTRL_ASDE | E1000_REG_CTRL_SLU); - e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_LRST); - e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_PHY_RST); - e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_ILOS); - e1000_reg_write(e, E1000_REG_FCAL, 0); - e1000_reg_write(e, E1000_REG_FCAH, 0); - e1000_reg_write(e, E1000_REG_FCT, 0); - e1000_reg_write(e, E1000_REG_FCTTV, 0); - e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_VME); - - /* Clear Multicast Table Array (MTA). */ - for (i = 0; i < 128; i++) - { - e1000_reg_write(e, E1000_REG_MTA + i * 4, 0); - } - /* Initialize statistics registers. */ - for (i = 0; i < 64; i++) - { - e1000_reg_write(e, E1000_REG_CRCERRS + (i * 4), 0); - } - /* - * Aquire MAC address and setup RX/TX buffers. - */ - e1000_init_addr(e); - e1000_init_buf(e); - - /* Enable interrupts. */ - e1000_reg_set(e, E1000_REG_IMS, E1000_REG_IMS_LSC | - E1000_REG_IMS_RXO | - E1000_REG_IMS_RXT | - E1000_REG_IMS_TXQE | - E1000_REG_IMS_TXDW); - return TRUE; + int r, i; + + e->status |= E1000_ENABLED; + e->irq_hook = e->irq; + + /* + * Set the interrupt handler and policy. Do not automatically + * reenable interrupts. Return the IRQ line number on interrupts. + */ + if ((r = sys_irqsetpolicy(e->irq, 0, &e->irq_hook)) != OK) + panic("sys_irqsetpolicy failed: %d", r); + if ((r = sys_irqenable(&e->irq_hook)) != OK) + panic("sys_irqenable failed: %d", r); + + /* Reset hardware. */ + e1000_reset_hw(e); + + /* + * Initialize appropriately, according to section 14.3 General + * Configuration of Intel's Gigabit Ethernet Controllers Software + * Developer's Manual. + */ + e1000_reg_set(e, E1000_REG_CTRL, + E1000_REG_CTRL_ASDE | E1000_REG_CTRL_SLU); + e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_LRST); + e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_PHY_RST); + e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_ILOS); + e1000_reg_write(e, E1000_REG_FCAL, 0); + e1000_reg_write(e, E1000_REG_FCAH, 0); + e1000_reg_write(e, E1000_REG_FCT, 0); + e1000_reg_write(e, E1000_REG_FCTTV, 0); + e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_VME); + + /* Clear Multicast Table Array (MTA). */ + for (i = 0; i < 128; i++) + e1000_reg_write(e, E1000_REG_MTA + i, 0); + + /* Initialize statistics registers. */ + for (i = 0; i < 64; i++) + e1000_reg_write(e, E1000_REG_CRCERRS + (i * 4), 0); + + /* Acquire MAC address and set up RX/TX buffers. */ + e1000_init_addr(e); + e1000_init_buf(e); + + /* Enable interrupts. */ + e1000_reg_set(e, E1000_REG_IMS, E1000_REG_IMS_LSC | E1000_REG_IMS_RXO | + E1000_REG_IMS_RXT | E1000_REG_IMS_TXQE | E1000_REG_IMS_TXDW); + return TRUE; } -/*===========================================================================* - * e1000_init_addr * - *===========================================================================*/ -static void e1000_init_addr(e) -e1000_t *e; +/* + * Initialize the card's ethernet address. + */ +static void +e1000_init_addr(e1000_t * e) { - static char eakey[]= E1000_ENVVAR "#_EA"; - static char eafmt[]= "x:x:x:x:x:x"; - u16_t word; - int i; - long v; - - /* - * Do we have a user defined ethernet address? - */ - eakey[sizeof(E1000_ENVVAR)-1] = '0' + e1000_instance; - - for (i= 0; i < 6; i++) - { - if (env_parse(eakey, eafmt, i, &v, 0x00L, 0xFFL) != EP_SET) - break; - else - e->address.ea_addr[i]= v; - } - /* - * If that fails, read Ethernet Address from EEPROM. - */ - if (i != 6) - { - for (i = 0; i < 3; i++) - { - word = e->eeprom_read(e, i); - e->address.ea_addr[(i * 2)] = (word & 0xff); - e->address.ea_addr[(i * 2) + 1] = (word & 0xff00) >> 8; + static char eakey[] = E1000_ENVVAR "#_EA"; + static char eafmt[] = "x:x:x:x:x:x"; + u16_t word; + int i; + long v; + + /* Do we have a user defined ethernet address? */ + eakey[sizeof(E1000_ENVVAR)-1] = '0' + e1000_instance; + + for (i = 0; i < 6; i++) { + if (env_parse(eakey, eafmt, i, &v, 0x00L, 0xFFL) != EP_SET) + break; + else + e->address.ea_addr[i] = v; } - } - /* - * Set Receive Address. - */ - e1000_reg_write(e, E1000_REG_RAL, *(u32_t *)(&e->address.ea_addr[0])); - e1000_reg_write(e, E1000_REG_RAH, *(u16_t *)(&e->address.ea_addr[4])); - e1000_reg_set(e, E1000_REG_RAH, E1000_REG_RAH_AV); - e1000_reg_set(e, E1000_REG_RCTL, E1000_REG_RCTL_MPE); - - E1000_DEBUG(3, ("%s: Ethernet Address %x:%x:%x:%x:%x:%x\n", e->name, - e->address.ea_addr[0], e->address.ea_addr[1], - e->address.ea_addr[2], e->address.ea_addr[3], - e->address.ea_addr[4], e->address.ea_addr[5])); + + /* If that fails, read Ethernet Address from EEPROM. */ + if (i != 6) { + for (i = 0; i < 3; i++) { + word = e->eeprom_read(e, i); + e->address.ea_addr[(i * 2)] = (word & 0x00ff); + e->address.ea_addr[(i * 2) + 1] = (word & 0xff00) >> 8; + } + } + + /* Set Receive Address. */ + e1000_reg_write(e, E1000_REG_RAL, *(u32_t *)(&e->address.ea_addr[0])); + e1000_reg_write(e, E1000_REG_RAH, *(u16_t *)(&e->address.ea_addr[4])); + e1000_reg_set(e, E1000_REG_RAH, E1000_REG_RAH_AV); + e1000_reg_set(e, E1000_REG_RCTL, E1000_REG_RCTL_MPE); + + E1000_DEBUG(3, ("%s: Ethernet Address %x:%x:%x:%x:%x:%x\n", e->name, + e->address.ea_addr[0], e->address.ea_addr[1], + e->address.ea_addr[2], e->address.ea_addr[3], + e->address.ea_addr[4], e->address.ea_addr[5])); } -/*===========================================================================* - * e1000_init_buf * - *===========================================================================*/ -static void e1000_init_buf(e) -e1000_t *e; +/* + * Initialize receive and transmit buffers. + */ +static void +e1000_init_buf(e1000_t * e) { - phys_bytes rx_buff_p; - phys_bytes tx_buff_p; - int i; - - /* Number of descriptors. */ - e->rx_desc_count = E1000_RXDESC_NR; - e->tx_desc_count = E1000_TXDESC_NR; - - /* - * First, allocate the receive descriptors. - */ - if (!e->rx_desc) - { - if ((e->rx_desc = alloc_contig(sizeof(e1000_rx_desc_t) * - e->rx_desc_count, AC_ALIGN4K, - &e->rx_desc_p)) == NULL) { - panic("failed to allocate RX descriptors"); - } - memset(e->rx_desc, 0, sizeof(e1000_rx_desc_t) * e->rx_desc_count); - - /* - * Allocate 2048-byte buffers. - */ - e->rx_buffer_size = E1000_RXDESC_NR * E1000_IOBUF_SIZE; - - /* Attempt to allocate. */ - if ((e->rx_buffer = alloc_contig(e->rx_buffer_size, - AC_ALIGN4K, &rx_buff_p)) == NULL) - { - panic("failed to allocate RX buffers"); + phys_bytes rx_buff_p; + phys_bytes tx_buff_p; + int i; + + /* Number of descriptors. */ + e->rx_desc_count = E1000_RXDESC_NR; + e->tx_desc_count = E1000_TXDESC_NR; + + /* Allocate the receive descriptors. */ + if (!e->rx_desc) { + if ((e->rx_desc = alloc_contig(sizeof(e1000_rx_desc_t) * + e->rx_desc_count, AC_ALIGN4K, &e->rx_desc_p)) == NULL) + panic("failed to allocate RX descriptors"); + + memset(e->rx_desc, 0, + sizeof(e1000_rx_desc_t) * e->rx_desc_count); + + e->rx_buffer_size = E1000_RXDESC_NR * E1000_IOBUF_SIZE; + + /* Allocate receive buffers. */ + if ((e->rx_buffer = alloc_contig(e->rx_buffer_size, AC_ALIGN4K, + &rx_buff_p)) == NULL) + panic("failed to allocate RX buffers"); + + /* Set up receive descriptors. */ + for (i = 0; i < E1000_RXDESC_NR; i++) + e->rx_desc[i].buffer = rx_buff_p + + (i * E1000_IOBUF_SIZE); } - /* Setup receive descriptors. */ - for (i = 0; i < E1000_RXDESC_NR; i++) - { - e->rx_desc[i].buffer = rx_buff_p + (i * E1000_IOBUF_SIZE); - } - } - /* - * Then, allocate transmit descriptors. - */ - if (!e->tx_desc) - { - if ((e->tx_desc = alloc_contig(sizeof(e1000_tx_desc_t) * - e->tx_desc_count, AC_ALIGN4K, - &e->tx_desc_p)) == NULL) { - panic("failed to allocate TX descriptors"); - } - memset(e->tx_desc, 0, sizeof(e1000_tx_desc_t) * e->tx_desc_count); - - /* - * Allocate 2048-byte buffers. - */ - e->tx_buffer_size = E1000_TXDESC_NR * E1000_IOBUF_SIZE; - - /* Attempt to allocate. */ - if ((e->tx_buffer = alloc_contig(e->tx_buffer_size, - AC_ALIGN4K, &tx_buff_p)) == NULL) - { - panic("failed to allocate TX buffers"); - } - /* Setup transmit descriptors. */ - for (i = 0; i < E1000_TXDESC_NR; i++) - { - e->tx_desc[i].buffer = tx_buff_p + (i * E1000_IOBUF_SIZE); + + /* Allocate transmit descriptors. */ + if (!e->tx_desc) { + if ((e->tx_desc = alloc_contig(sizeof(e1000_tx_desc_t) * + e->tx_desc_count, AC_ALIGN4K, &e->tx_desc_p)) == NULL) + panic("failed to allocate TX descriptors"); + + memset(e->tx_desc, 0, + sizeof(e1000_tx_desc_t) * e->tx_desc_count); + + /* Allocate transmit buffers. */ + e->tx_buffer_size = E1000_TXDESC_NR * E1000_IOBUF_SIZE; + + /* Attempt to allocate. */ + if ((e->tx_buffer = alloc_contig(e->tx_buffer_size, AC_ALIGN4K, + &tx_buff_p)) == NULL) + panic("failed to allocate TX buffers"); + + /* Set up transmit descriptors. */ + for (i = 0; i < E1000_TXDESC_NR; i++) + e->tx_desc[i].buffer = tx_buff_p + + (i * E1000_IOBUF_SIZE); } - } - /* - * Setup the receive ring registers. - */ - e1000_reg_write(e, E1000_REG_RDBAL, e->rx_desc_p); - e1000_reg_write(e, E1000_REG_RDBAH, 0); - e1000_reg_write(e, E1000_REG_RDLEN, e->rx_desc_count * - sizeof(e1000_rx_desc_t)); - e1000_reg_write(e, E1000_REG_RDH, 0); - e1000_reg_write(e, E1000_REG_RDT, e->rx_desc_count - 1); - e1000_reg_unset(e, E1000_REG_RCTL, E1000_REG_RCTL_BSIZE); - e1000_reg_set(e, E1000_REG_RCTL, E1000_REG_RCTL_EN); - - /* - * Setup the transmit ring registers. - */ - e1000_reg_write(e, E1000_REG_TDBAL, e->tx_desc_p); - e1000_reg_write(e, E1000_REG_TDBAH, 0); - e1000_reg_write(e, E1000_REG_TDLEN, e->tx_desc_count * - sizeof(e1000_tx_desc_t)); - e1000_reg_write(e, E1000_REG_TDH, 0); - e1000_reg_write(e, E1000_REG_TDT, 0); - e1000_reg_set( e, E1000_REG_TCTL, E1000_REG_TCTL_EN | E1000_REG_TCTL_PSP); + + /* Set up the receive ring registers. */ + e1000_reg_write(e, E1000_REG_RDBAL, e->rx_desc_p); + e1000_reg_write(e, E1000_REG_RDBAH, 0); + e1000_reg_write(e, E1000_REG_RDLEN, + e->rx_desc_count * sizeof(e1000_rx_desc_t)); + e1000_reg_write(e, E1000_REG_RDH, 0); + e1000_reg_write(e, E1000_REG_RDT, e->rx_desc_count - 1); + e1000_reg_unset(e, E1000_REG_RCTL, E1000_REG_RCTL_BSIZE); + e1000_reg_set(e, E1000_REG_RCTL, E1000_REG_RCTL_EN); + + /* Set up the transmit ring registers. */ + e1000_reg_write(e, E1000_REG_TDBAL, e->tx_desc_p); + e1000_reg_write(e, E1000_REG_TDBAH, 0); + e1000_reg_write(e, E1000_REG_TDLEN, + e->tx_desc_count * sizeof(e1000_tx_desc_t)); + e1000_reg_write(e, E1000_REG_TDH, 0); + e1000_reg_write(e, E1000_REG_TDT, 0); + e1000_reg_set(e, E1000_REG_TCTL, + E1000_REG_TCTL_EN | E1000_REG_TCTL_PSP); } -/*===========================================================================* - * e1000_reset_hw * - *===========================================================================*/ -static void e1000_reset_hw(e) -e1000_t *e; +/* + * Reset the card. + */ +static void +e1000_reset_hw(e1000_t * e) { - /* Assert a Device Reset signal. */ - e1000_reg_set(e, E1000_REG_CTRL, E1000_REG_CTRL_RST); - /* Wait one microsecond. */ - tickdelay(1); + /* Assert a Device Reset signal. */ + e1000_reg_set(e, E1000_REG_CTRL, E1000_REG_CTRL_RST); + + /* Wait one microsecond. */ + tickdelay(1); } -/*===========================================================================* - * e1000_writev_s * - *===========================================================================*/ -static void e1000_writev_s(mp, from_int) -message *mp; -int from_int; +/* + * Try to send a packet. + */ +static void +e1000_writev_s(message * mp, int from_int) { - e1000_t *e = &e1000_state; - e1000_tx_desc_t *desc; - iovec_s_t iovec[E1000_IOVEC_NR]; - int r, head, tail, i, bytes = 0, size; - - E1000_DEBUG(3, ("e1000: writev_s(%p,%d)\n", mp, from_int)); - - /* Are we called from the interrupt handler? */ - if (!from_int) - { - /* We cannot write twice simultaneously. - assert(!(e->status & E1000_WRITING)); */ - - /* Copy write message. */ - e->tx_message = *mp; - e->client = mp->m_source; - e->status |= E1000_WRITING; - - /* Must be a sane vector count. */ - assert(e->tx_message.m_net_netdrv_dl_writev_s.count > 0); - assert(e->tx_message.m_net_netdrv_dl_writev_s.count < E1000_IOVEC_NR); - - /* - * Copy the I/O vector table. - */ - if ((r = sys_safecopyfrom(e->tx_message.m_source, - e->tx_message.m_net_netdrv_dl_writev_s.grant, 0, - (vir_bytes) iovec, - e->tx_message.m_net_netdrv_dl_writev_s.count * - sizeof(iovec_s_t))) != OK) - { - panic("sys_safecopyfrom() failed: %d", r); - } - /* Find the head, tail and current descriptors. */ - head = e1000_reg_read(e, E1000_REG_TDH); - tail = e1000_reg_read(e, E1000_REG_TDT); - desc = &e->tx_desc[tail]; - - E1000_DEBUG(4, ("%s: head=%d, tail=%d\n", - e->name, head, tail)); - - /* Loop vector elements. */ - for (i = 0; i < e->tx_message.m_net_netdrv_dl_writev_s.count; i++) - { - size = iovec[i].iov_size < (E1000_IOBUF_SIZE - bytes) ? - iovec[i].iov_size : (E1000_IOBUF_SIZE - bytes); - - E1000_DEBUG(4, ("iovec[%d] = %d\n", i, size)); - - /* Copy bytes to TX queue buffers. */ - if ((r = sys_safecopyfrom(e->tx_message.m_source, - iovec[i].iov_grant, 0, - (vir_bytes) e->tx_buffer + - (tail * E1000_IOBUF_SIZE), - size)) != OK) - { - panic("sys_safecopyfrom() failed: %d", r); - } - /* Mark this descriptor ready. */ - desc->status = 0; - desc->command = 0; - desc->length = size; - - /* Marks End-of-Packet. */ - if (i == e->tx_message.m_net_netdrv_dl_writev_s.count - 1) - { - desc->command = E1000_TX_CMD_EOP | - E1000_TX_CMD_FCS | - E1000_TX_CMD_RS; - } - /* Move to next descriptor. */ - tail = (tail + 1) % e->tx_desc_count; - bytes += size; - desc = &e->tx_desc[tail]; - } - /* Increment tail. Start transmission. */ - e1000_reg_write(e, E1000_REG_TDT, tail); - - E1000_DEBUG(2, ("e1000: wrote %d byte packet\n", bytes)); - } - else - { - e->status |= E1000_TRANSMIT; - } - reply(e); + e1000_t *e = &e1000_state; + e1000_tx_desc_t *desc; + iovec_s_t iovec[E1000_IOVEC_NR]; + int r, head, tail, i, bytes = 0, size; + + E1000_DEBUG(3, ("e1000: writev_s(%p,%d)\n", mp, from_int)); + + /* Are we called from the interrupt handler? */ + if (!from_int) { + /* We cannot write twice simultaneously. + assert(!(e->status & E1000_WRITING)); */ + + /* Copy write message. */ + e->tx_message = *mp; + e->client = mp->m_source; + e->status |= E1000_WRITING; + + /* Must be a sane vector count. */ + assert(e->tx_message.m_net_netdrv_dl_writev_s.count > 0); + assert(e->tx_message.m_net_netdrv_dl_writev_s.count < + E1000_IOVEC_NR); + + /* + * Copy the I/O vector table. + */ + if ((r = sys_safecopyfrom(e->tx_message.m_source, + e->tx_message.m_net_netdrv_dl_writev_s.grant, 0, + (vir_bytes)iovec, + e->tx_message.m_net_netdrv_dl_writev_s.count * + sizeof(iovec_s_t))) != OK) + panic("sys_safecopyfrom() failed: %d", r); + + /* Find the head, tail and current descriptors. */ + head = e1000_reg_read(e, E1000_REG_TDH); + tail = e1000_reg_read(e, E1000_REG_TDT); + desc = &e->tx_desc[tail]; + + E1000_DEBUG(4, ("%s: head=%d, tail=%d\n", + e->name, head, tail)); + + /* Loop vector elements. */ + for (i = 0; i < e->tx_message.m_net_netdrv_dl_writev_s.count; + i++) + { + size = iovec[i].iov_size < (E1000_IOBUF_SIZE - bytes) ? + iovec[i].iov_size : (E1000_IOBUF_SIZE - bytes); + + E1000_DEBUG(4, ("iovec[%d] = %d\n", i, size)); + + /* Copy bytes to TX queue buffers. */ + if ((r = sys_safecopyfrom(e->tx_message.m_source, + iovec[i].iov_grant, 0, (vir_bytes) e->tx_buffer + + (tail * E1000_IOBUF_SIZE), size)) != OK) + panic("sys_safecopyfrom() failed: %d", r); + + /* Mark this descriptor ready. */ + desc->status = 0; + desc->command = 0; + desc->length = size; + + /* Marks End-of-Packet. */ + if (i == + e->tx_message.m_net_netdrv_dl_writev_s.count - 1) { + desc->command = E1000_TX_CMD_EOP | + E1000_TX_CMD_FCS | E1000_TX_CMD_RS; + } + /* Move to next descriptor. */ + tail = (tail + 1) % e->tx_desc_count; + bytes += size; + desc = &e->tx_desc[tail]; + } + + /* Increment tail. Start transmission. */ + e1000_reg_write(e, E1000_REG_TDT, tail); + + E1000_DEBUG(2, ("e1000: wrote %d byte packet\n", bytes)); + } else + e->status |= E1000_TRANSMIT; + reply(e); } -/*===========================================================================* - * e1000_readv_s * - *===========================================================================*/ -static void e1000_readv_s(mp, from_int) -message *mp; -int from_int; +/* + * Try to receive a packet. + */ +static void +e1000_readv_s(message * mp, int from_int) { - e1000_t *e = &e1000_state; - e1000_rx_desc_t *desc; - iovec_s_t iovec[E1000_IOVEC_NR]; - int i, r, head, tail, cur, bytes = 0, size; - - E1000_DEBUG(3, ("e1000: readv_s(%p,%d)\n", mp, from_int)); - - /* Are we called from the interrupt handler? */ - if (!from_int) - { - e->rx_message = *mp; - e->client = mp->m_source; - e->status |= E1000_READING; - e->rx_size = 0; - - assert(e->rx_message.m_net_netdrv_dl_readv_s.count > 0); - assert(e->rx_message.m_net_netdrv_dl_readv_s.count < E1000_IOVEC_NR); - } - if (e->status & E1000_READING) - { - /* - * Copy the I/O vector table first. - */ - if ((r = sys_safecopyfrom(e->rx_message.m_source, - e->rx_message.m_net_netdrv_dl_readv_s.grant, 0, - (vir_bytes) iovec, - e->rx_message.m_net_netdrv_dl_readv_s.count * - sizeof(iovec_s_t))) != OK) - { - panic("sys_safecopyfrom() failed: %d", r); - } - /* Find the head, tail and current descriptors. */ - head = e1000_reg_read(e, E1000_REG_RDH); - tail = e1000_reg_read(e, E1000_REG_RDT); - cur = (tail + 1) % e->rx_desc_count; - desc = &e->rx_desc[cur]; - - /* - * Only handle one packet at a time. - */ - if (!(desc->status & E1000_RX_STATUS_EOP)) - { - reply(e); - return; + e1000_t *e = &e1000_state; + e1000_rx_desc_t *desc; + iovec_s_t iovec[E1000_IOVEC_NR]; + int i, r, head, tail, cur, bytes = 0, size; + + E1000_DEBUG(3, ("e1000: readv_s(%p,%d)\n", mp, from_int)); + + /* Are we called from the interrupt handler? */ + if (!from_int) { + e->rx_message = *mp; + e->client = mp->m_source; + e->status |= E1000_READING; + e->rx_size = 0; + + assert(e->rx_message.m_net_netdrv_dl_readv_s.count > 0); + assert(e->rx_message.m_net_netdrv_dl_readv_s.count < + E1000_IOVEC_NR); } - E1000_DEBUG(4, ("%s: head=%x, tail=%d\n", - e->name, head, tail)); - /* - * Copy to vector elements. - */ - for (i = 0; i < e->rx_message.m_net_netdrv_dl_readv_s.count && - bytes < desc->length; i++) - { - size = iovec[i].iov_size < (desc->length - bytes) ? - iovec[i].iov_size : (desc->length - bytes); - - E1000_DEBUG(4, ("iovec[%d] = %lu[%d]\n", - i, iovec[i].iov_size, size)); - - if ((r = sys_safecopyto(e->rx_message.m_source, iovec[i].iov_grant, - 0, (vir_bytes) e->rx_buffer + bytes + - (cur * E1000_IOBUF_SIZE), - size)) != OK) - { - panic("sys_safecopyto() failed: %d", r); - } - bytes += size; + if (e->status & E1000_READING) { + /* + * Copy the I/O vector table first. + */ + if ((r = sys_safecopyfrom(e->rx_message.m_source, + e->rx_message.m_net_netdrv_dl_readv_s.grant, 0, + (vir_bytes)iovec, + e->rx_message.m_net_netdrv_dl_readv_s.count * + sizeof(iovec_s_t))) != OK) + panic("sys_safecopyfrom() failed: %d", r); + + /* Find the head, tail and current descriptors. */ + head = e1000_reg_read(e, E1000_REG_RDH); + tail = e1000_reg_read(e, E1000_REG_RDT); + cur = (tail + 1) % e->rx_desc_count; + desc = &e->rx_desc[cur]; + + /* + * Only handle one packet at a time. + */ + if (!(desc->status & E1000_RX_STATUS_EOP)) { + reply(e); + return; + } + E1000_DEBUG(4, ("%s: head=%x, tail=%d\n", + e->name, head, tail)); + + /* + * Copy to vector elements. + */ + for (i = 0; i < e->rx_message.m_net_netdrv_dl_readv_s.count && + bytes < desc->length; i++) { + size = iovec[i].iov_size < (desc->length - bytes) ? + iovec[i].iov_size : (desc->length - bytes); + + E1000_DEBUG(4, ("iovec[%d] = %lu[%d]\n", + i, iovec[i].iov_size, size)); + + if ((r = sys_safecopyto(e->rx_message.m_source, + iovec[i].iov_grant, 0, (vir_bytes)e->rx_buffer + + bytes + (cur * E1000_IOBUF_SIZE), size)) != OK) + panic("sys_safecopyto() failed: %d", r); + bytes += size; + } + desc->status = 0; + + /* + * Update state. + */ + e->rx_size = bytes; + e->status |= E1000_RECEIVED; + E1000_DEBUG(2, ("e1000: got %d byte packet\n", e->rx_size)); + + /* Increment tail. */ + e1000_reg_write(e, E1000_REG_RDT, + (tail + 1) % e->rx_desc_count); } - desc->status = 0; - - /* - * Update state. - */ - e->rx_size = bytes; - e->status |= E1000_RECEIVED; - E1000_DEBUG(2, ("e1000: got %d byte packet\n", e->rx_size)); - - /* Increment tail. */ - e1000_reg_write(e, E1000_REG_RDT, (tail + 1) % e->rx_desc_count); - } - reply(e); + reply(e); } -/*===========================================================================* - * e1000_getstat_s * - *===========================================================================*/ -static void e1000_getstat_s(mp) -message *mp; +/* + * Return statistics. + */ +static void +e1000_getstat_s(message * mp) { - int r; - eth_stat_t stats; - e1000_t *e = &e1000_state; - - E1000_DEBUG(3, ("e1000: getstat_s()\n")); - - stats.ets_recvErr = e1000_reg_read(e, E1000_REG_RXERRC); - stats.ets_sendErr = 0; - stats.ets_OVW = 0; - stats.ets_CRCerr = e1000_reg_read(e, E1000_REG_CRCERRS); - stats.ets_frameAll = 0; - stats.ets_missedP = e1000_reg_read(e, E1000_REG_MPC); - stats.ets_packetR = e1000_reg_read(e, E1000_REG_TPR); - stats.ets_packetT = e1000_reg_read(e, E1000_REG_TPT); - stats.ets_collision = e1000_reg_read(e, E1000_REG_COLC); - stats.ets_transAb = 0; - stats.ets_carrSense = 0; - stats.ets_fifoUnder = 0; - stats.ets_fifoOver = 0; - stats.ets_CDheartbeat = 0; - stats.ets_OWC = 0; - - sys_safecopyto(mp->m_source, mp->m_net_netdrv_dl_getstat_s.grant, 0, + int r; + eth_stat_t stats; + e1000_t *e = &e1000_state; + + E1000_DEBUG(3, ("e1000: getstat_s()\n")); + + stats.ets_recvErr = e1000_reg_read(e, E1000_REG_RXERRC); + stats.ets_sendErr = 0; + stats.ets_OVW = 0; + stats.ets_CRCerr = e1000_reg_read(e, E1000_REG_CRCERRS); + stats.ets_frameAll = 0; + stats.ets_missedP = e1000_reg_read(e, E1000_REG_MPC); + stats.ets_packetR = e1000_reg_read(e, E1000_REG_TPR); + stats.ets_packetT = e1000_reg_read(e, E1000_REG_TPT); + stats.ets_collision = e1000_reg_read(e, E1000_REG_COLC); + stats.ets_transAb = 0; + stats.ets_carrSense = 0; + stats.ets_fifoUnder = 0; + stats.ets_fifoOver = 0; + stats.ets_CDheartbeat = 0; + stats.ets_OWC = 0; + + sys_safecopyto(mp->m_source, mp->m_net_netdrv_dl_getstat_s.grant, 0, (vir_bytes)&stats, sizeof(stats)); - mp->m_type = DL_STAT_REPLY; - if((r=ipc_send(mp->m_source, mp)) != OK) - panic("e1000_getstat: ipc_send() failed: %d", r); + mp->m_type = DL_STAT_REPLY; + if ((r = ipc_send(mp->m_source, mp)) != OK) + panic("e1000_getstat: ipc_send() failed: %d", r); } -/*===========================================================================* - * e1000_interrupt * - *===========================================================================*/ -static void e1000_interrupt(mp) -message *mp; +/* + * Handle an interrupt. + */ +static void +e1000_interrupt(message * mp) { - e1000_t *e; - u32_t cause; - - E1000_DEBUG(3, ("e1000: interrupt\n")); - - /* - * Check the card for interrupt reason(s). - */ - e = &e1000_state; - - /* Re-enable interrupts. */ - if (sys_irqenable(&e->irq_hook) != OK) - { - panic("failed to re-enable IRQ"); - } - - /* Read the Interrupt Cause Read register. */ - if ((cause = e1000_reg_read(e, E1000_REG_ICR))) - { - if (cause & E1000_REG_ICR_LSC) - e1000_link_changed(e); - - if (cause & (E1000_REG_ICR_RXO | E1000_REG_ICR_RXT)) - e1000_readv_s(&e->rx_message, TRUE); - - if ((cause & E1000_REG_ICR_TXQE) || - (cause & E1000_REG_ICR_TXDW)) - e1000_writev_s(&e->tx_message, TRUE); - } + e1000_t *e; + u32_t cause; + + E1000_DEBUG(3, ("e1000: interrupt\n")); + + e = &e1000_state; + + /* Reenable interrupts. */ + if (sys_irqenable(&e->irq_hook) != OK) + panic("failed to re-enable IRQ"); + + /* Read the Interrupt Cause Read register. */ + if ((cause = e1000_reg_read(e, E1000_REG_ICR)) != 0) { + if (cause & E1000_REG_ICR_LSC) + e1000_link_changed(e); + + if (cause & (E1000_REG_ICR_RXO | E1000_REG_ICR_RXT)) + e1000_readv_s(&e->rx_message, TRUE); + + if (cause & (E1000_REG_ICR_TXQE | E1000_REG_ICR_TXDW)) + e1000_writev_s(&e->tx_message, TRUE); + } } -/*===========================================================================* - * e1000_link_changed * - *===========================================================================*/ -static int e1000_link_changed(e) -e1000_t *e; +/* + * Link status has changed. Nothing to do for now. + */ +static int +e1000_link_changed(e1000_t * e) { - E1000_DEBUG(4, ("%s: link_changed()\n", e->name)); - return FALSE; + + E1000_DEBUG(4, ("%s: link_changed()\n", e->name)); + return FALSE; } -/*===========================================================================* - * e1000_stop * - *===========================================================================*/ -static void e1000_stop(e) -e1000_t *e; +/* + * Stop the card. + */ +static void +e1000_stop(e1000_t *e) { - E1000_DEBUG(3, ("%s: stop()\n", e->name)); - e1000_reset_hw(e); + E1000_DEBUG(3, ("%s: stop()\n", e->name)); + + e1000_reset_hw(e); - exit(EXIT_SUCCESS); + exit(EXIT_SUCCESS); } -/*===========================================================================* - * e1000_reg_read * - *===========================================================================*/ -static uint32_t e1000_reg_read(e, reg) -e1000_t *e; -uint32_t reg; +/* + * Read from a register. + */ +static uint32_t +e1000_reg_read(e1000_t * e, uint32_t reg) { - uint32_t value; + uint32_t value; - /* Assume a sane register. */ - assert(reg < 0x1ffff); + /* Assume a sane register. */ + assert(reg < 0x1ffff); - /* Read from memory mapped register. */ - value = *(volatile u32_t *)(e->regs + reg); + /* Read from memory mapped register. */ + value = *(volatile uint32_t *)(e->regs + reg); - /* Return the result. */ - return value; + /* Return the result. */ + return value; } -/*===========================================================================* - * e1000_reg_write * - *===========================================================================*/ -static void e1000_reg_write(e, reg, value) -e1000_t *e; -uint32_t reg; -uint32_t value; +/* + * Write to a register. + */ +static void +e1000_reg_write(e1000_t * e, uint32_t reg, uint32_t value) { - /* Assume a sane register. */ - assert(reg < 0x1ffff); - - /* Write to memory mapped register. */ - *(volatile u32_t *)(e->regs + reg) = value; + + /* Assume a sane register. */ + assert(reg < 0x1ffff); + + /* Write to memory mapped register. */ + *(volatile u32_t *)(e->regs + reg) = value; } -/*===========================================================================* - * e1000_reg_set * - *===========================================================================*/ -static void e1000_reg_set(e, reg, value) -e1000_t *e; -uint32_t reg; -uint32_t value; +/* + * Set bits in a register. + */ +static void +e1000_reg_set(e1000_t * e, uint32_t reg, uint32_t value) { - uint32_t data; + uint32_t data; - /* First read the current value. */ - data = e1000_reg_read(e, reg); - - /* Set value, and write back. */ - e1000_reg_write(e, reg, data | value); + /* First read the current value. */ + data = e1000_reg_read(e, reg); + + /* Set bits, and write back. */ + e1000_reg_write(e, reg, data | value); } -/*===========================================================================* - * e1000_reg_unset * - *===========================================================================*/ -static void e1000_reg_unset(e, reg, value) -e1000_t *e; -uint32_t reg; -uint32_t value; +/* + * Clear bits in a register. + */ +static void +e1000_reg_unset(e1000_t * e, uint32_t reg, uint32_t value) { - uint32_t data; + uint32_t data; - /* First read the current value. */ - data = e1000_reg_read(e, reg); - - /* Unset value, and write back. */ - e1000_reg_write(e, reg, data & ~value); -} + /* First read the current value. */ + data = e1000_reg_read(e, reg); + /* Unset bits, and write back. */ + e1000_reg_write(e, reg, data & ~value); +} -/*===========================================================================* - * eeprom_eerd * - *===========================================================================*/ -static u16_t eeprom_eerd(v, reg) -void *v; -int reg; +/* + * Read from EEPROM. + */ +static u16_t +eeprom_eerd(void * v, int reg) { - e1000_t *e = (e1000_t *) v; - u32_t data; + e1000_t *e = (e1000_t *)v; + u32_t data; - /* Request EEPROM read. */ - e1000_reg_write(e, E1000_REG_EERD, - (reg << e->eeprom_addr_off) | (E1000_REG_EERD_START)); + /* Request EEPROM read. */ + e1000_reg_write(e, E1000_REG_EERD, + (reg << e->eeprom_addr_off) | (E1000_REG_EERD_START)); - /* Wait until ready. */ - while (!((data = (e1000_reg_read(e, E1000_REG_EERD))) & e->eeprom_done_bit)); + /* Wait until ready. */ + while (!((data = (e1000_reg_read(e, E1000_REG_EERD))) & + e->eeprom_done_bit)); - return data >> 16; + return data >> 16; } -/*===========================================================================* - * eeprom_ich_init * - *===========================================================================*/ -static int eeprom_ich_init(e) -e1000_t *e; +/* + * Initialize ICH8 flash. + */ +static int +eeprom_ich_init(e1000_t * e) { - union ich8_hws_flash_status hsfsts; - int ret_val = -1; - int i = 0; - - hsfsts.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFSTS); - - /* Check if the flash descriptor is valid */ - if (hsfsts.hsf_status.fldesvalid == 0) - { - E1000_DEBUG(3, ("Flash descriptor invalid. " - "SW Sequencing must be used.")); - goto out; - } - /* Clear FCERR and DAEL in hw status by writing 1 */ - hsfsts.hsf_status.flcerr = 1; - hsfsts.hsf_status.dael = 1; - - E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFSTS, hsfsts.regval); - - /* - * Either we should have a hardware SPI cycle in progress - * bit to check against, in order to start a new cycle or - * FDONE bit should be changed in the hardware so that it - * is 1 after hardware reset, which can then be used as an - * indication whether a cycle is in progress or has been - * completed. - */ - if (hsfsts.hsf_status.flcinprog == 0) - { - /* - * There is no cycle running at present, - * so we can start a cycle. - * Begin by setting Flash Cycle Done. - */ - hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFSTS, hsfsts.regval); - ret_val = 0; - } - else - { - /* - * Otherwise poll for sometime so the current - * cycle has a chance to end before giving up. - */ - for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) - { - hsfsts.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFSTS); - - if (hsfsts.hsf_status.flcinprog == 0) - { - ret_val = 0; - break; - } - tickdelay(1); - } - if (ret_val == 0) - { - /* - * Successful in waiting for previous cycle to timeout, - * now set the Flash Cycle Done. - */ - hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFSTS, - hsfsts.regval); - } - else - { - E1000_DEBUG(3, ("Flash controller busy, cannot get access")); - } - } -out: - return ret_val; + union ich8_hws_flash_status hsfsts; + int ret_val = -1; + int i = 0; + + hsfsts.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFSTS); + + /* Check if the flash descriptor is valid */ + if (hsfsts.hsf_status.fldesvalid == 0) { + E1000_DEBUG(3, ("Flash descriptor invalid. " + "SW Sequencing must be used.")); + goto out; + } + + /* Clear FCERR and DAEL in hw status by writing 1 */ + hsfsts.hsf_status.flcerr = 1; + hsfsts.hsf_status.dael = 1; + + E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFSTS, hsfsts.regval); + + /* + * Either we should have a hardware SPI cycle in progress bit to check + * against, in order to start a new cycle or FDONE bit should be + * changed in the hardware so that it is 1 after hardware reset, which + * can then be used as an indication whether a cycle is in progress or + * has been completed. + */ + if (hsfsts.hsf_status.flcinprog == 0) { + /* + * There is no cycle running at present, so we can start a + * cycle. Begin by setting Flash Cycle Done. + */ + hsfsts.hsf_status.flcdone = 1; + E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFSTS, hsfsts.regval); + ret_val = 0; + } else { + /* + * Otherwise poll for sometime so the current cycle has a + * chance to end before giving up. + */ + for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) { + hsfsts.regval = E1000_READ_FLASH_REG16(e, + ICH_FLASH_HSFSTS); + + if (hsfsts.hsf_status.flcinprog == 0) { + ret_val = 0; + break; + } + tickdelay(1); + } + if (ret_val == 0) { + /* + * Successful in waiting for previous cycle to timeout, + * now set the Flash Cycle Done. + */ + hsfsts.hsf_status.flcdone = 1; + E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFSTS, + hsfsts.regval); + } else { + E1000_DEBUG(3, + ("Flash controller busy, cannot get access")); + } + } +out: + return ret_val; } -/*===========================================================================* - * eeprom_ich_cycle * - *===========================================================================*/ -static int eeprom_ich_cycle(const e1000_t *e, u32_t timeout) +/* + * Start ICH8 flash cycle. + */ +static int +eeprom_ich_cycle(e1000_t * e, u32_t timeout) { - union ich8_hws_flash_ctrl hsflctl; - union ich8_hws_flash_status hsfsts; - int ret_val = -1; - u32_t i = 0; - - E1000_DEBUG(3, ("e1000_flash_cycle_ich8lan")); - - /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ - hsflctl.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFCTL); - hsflctl.hsf_ctrl.flcgo = 1; - E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFCTL, hsflctl.regval); - - /* wait till FDONE bit is set to 1 */ - do - { - hsfsts.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.flcdone == 1) - break; - tickdelay(1); - } - while (i++ < timeout); - - if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) - ret_val = 0; - - return ret_val; + union ich8_hws_flash_ctrl hsflctl; + union ich8_hws_flash_status hsfsts; + int ret_val = -1; + u32_t i = 0; + + E1000_DEBUG(3, ("e1000_flash_cycle_ich8lan")); + + /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ + hsflctl.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFCTL); + hsflctl.hsf_ctrl.flcgo = 1; + E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFCTL, hsflctl.regval); + + /* Wait till the FDONE bit is set to 1 */ + do { + hsfsts.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFSTS); + if (hsfsts.hsf_status.flcdone == 1) + break; + tickdelay(1); + } while (i++ < timeout); + + if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) + ret_val = 0; + + return ret_val; } -/*===========================================================================* - * eeprom_ich * - *===========================================================================*/ -static u16_t eeprom_ich(v, reg) -void *v; -int reg; +/* + * Read from ICH8 flash. + */ +static u16_t +eeprom_ich(void * v, int reg) { - union ich8_hws_flash_status hsfsts; - union ich8_hws_flash_ctrl hsflctl; - u32_t flash_linear_addr; - u32_t flash_data = 0; - int ret_val = -1; - u8_t count = 0; - e1000_t *e = (e1000_t *) v; - u16_t data = 0; - - E1000_DEBUG(3, ("e1000_read_flash_data_ich8lan")); - - if (reg > ICH_FLASH_LINEAR_ADDR_MASK) - goto out; - - reg *= sizeof(u16_t); - flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & reg) + - e->flash_base_addr; - - do { - tickdelay(1); - - /* Steps */ - ret_val = eeprom_ich_init(e); - if (ret_val != 0) - break; - - hsflctl.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFCTL); - /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ - hsflctl.hsf_ctrl.fldbcount = 1; - hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; - E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFCTL, hsflctl.regval); - E1000_WRITE_FLASH_REG(e, ICH_FLASH_FADDR, flash_linear_addr); - - ret_val = eeprom_ich_cycle(v, ICH_FLASH_READ_COMMAND_TIMEOUT); - - /* - * Check if FCERR is set to 1, if set to 1, clear it - * and try the whole sequence a few more times, else - * read in (shift in) the Flash Data0, the order is - * least significant byte first msb to lsb - */ - if (ret_val == 0) - { - flash_data = E1000_READ_FLASH_REG(e, ICH_FLASH_FDATA0); - data = (u16_t)(flash_data & 0x0000FFFF); - break; - } - else - { - /* - * If we've gotten here, then things are probably - * completely hosed, but if the error condition is - * detected, it won't hurt to give it another try... - * ICH_FLASH_CYCLE_REPEAT_COUNT times. - */ - hsfsts.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFSTS); - - if (hsfsts.hsf_status.flcerr == 1) - { - /* Repeat for some time before giving up. */ - continue; - } - else if (hsfsts.hsf_status.flcdone == 0) - { - E1000_DEBUG(3, ("Timeout error - flash cycle " - "did not complete.")); - break; - } - } - } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); + union ich8_hws_flash_status hsfsts; + union ich8_hws_flash_ctrl hsflctl; + u32_t flash_linear_addr; + u32_t flash_data = 0; + int ret_val = -1; + u8_t count = 0; + e1000_t *e = (e1000_t *)v; + u16_t data = 0; + + E1000_DEBUG(3, ("e1000_read_flash_data_ich8lan")); + + if (reg > ICH_FLASH_LINEAR_ADDR_MASK) + goto out; + + reg *= sizeof(u16_t); + flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & reg) + + e->flash_base_addr; + + do { + tickdelay(1); + + /* Steps */ + ret_val = eeprom_ich_init(e); + if (ret_val != 0) + break; + + hsflctl.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFCTL); + /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ + hsflctl.hsf_ctrl.fldbcount = 1; + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; + E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFCTL, hsflctl.regval); + E1000_WRITE_FLASH_REG(e, ICH_FLASH_FADDR, flash_linear_addr); + + ret_val = eeprom_ich_cycle(v, ICH_FLASH_READ_COMMAND_TIMEOUT); + + /* + * Check if FCERR is set to 1, if set to 1, clear it and try + * the whole sequence a few more times, else read in (shift in) + * the Flash Data0, the order is least significant byte first + * msb to lsb. + */ + if (ret_val == 0) { + flash_data = E1000_READ_FLASH_REG(e, ICH_FLASH_FDATA0); + data = (u16_t)(flash_data & 0x0000FFFF); + break; + } else { + /* + * If we've gotten here, then things are probably + * completely hosed, but if the error condition is + * detected, it won't hurt to give it another try... + * ICH_FLASH_CYCLE_REPEAT_COUNT times. + */ + hsfsts.regval = E1000_READ_FLASH_REG16(e, + ICH_FLASH_HSFSTS); + + if (hsfsts.hsf_status.flcerr == 1) { + /* Repeat for some time before giving up. */ + continue; + } else if (hsfsts.hsf_status.flcdone == 0) { + E1000_DEBUG(3, ("Timeout error - flash cycle " + "did not complete.")); + break; + } + } + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); out: - return data; + return data; } -/*===========================================================================* - * reply * - *===========================================================================*/ -static void reply(e) -e1000_t *e; +/* + * Reply to a task request from Inet. + */ +static void +reply(e1000_t *e) { - message msg; - int r; - - /* Only reply to client for read/write request. */ - if (!(e->status & E1000_READING || - e->status & E1000_WRITING)) - { - return; - } - /* Construct reply message. */ - msg.m_type = DL_TASK_REPLY; - msg.m_netdrv_net_dl_task.flags = DL_NOFLAGS; - msg.m_netdrv_net_dl_task.count = 0; - - /* Did we successfully receive packet(s)? */ - if (e->status & E1000_READING && - e->status & E1000_RECEIVED) - { - msg.m_netdrv_net_dl_task.flags |= DL_PACK_RECV; - msg.m_netdrv_net_dl_task.count = - e->rx_size >= ETH_MIN_PACK_SIZE ? - e->rx_size : ETH_MIN_PACK_SIZE; - - /* Clear flags. */ - e->status &= ~(E1000_READING | E1000_RECEIVED); - } - /* Did we successfully transmit packet(s)? */ - if (e->status & E1000_TRANSMIT && - e->status & E1000_WRITING) - { - msg.m_netdrv_net_dl_task.flags |= DL_PACK_SEND; - - /* Clear flags. */ - e->status &= ~(E1000_WRITING | E1000_TRANSMIT); - } - - /* Acknowledge to INET. */ - if ((r = ipc_send(e->client, &msg)) != OK) - { - panic("ipc_send() failed: %d", r); - } + message msg; + int r; + + /* Only reply to client for read/write request. */ + if (!(e->status & E1000_READING || e->status & E1000_WRITING)) + return; + + /* Construct reply message. */ + msg.m_type = DL_TASK_REPLY; + msg.m_netdrv_net_dl_task.flags = DL_NOFLAGS; + msg.m_netdrv_net_dl_task.count = 0; + + /* Did we successfully receive packet(s)? */ + if (e->status & E1000_READING && e->status & E1000_RECEIVED) { + msg.m_netdrv_net_dl_task.flags |= DL_PACK_RECV; + msg.m_netdrv_net_dl_task.count = + e->rx_size >= ETH_MIN_PACK_SIZE ? + e->rx_size : ETH_MIN_PACK_SIZE; + + /* Clear flags. */ + e->status &= ~(E1000_READING | E1000_RECEIVED); + } + + /* Did we successfully transmit packet(s)? */ + if (e->status & E1000_TRANSMIT && e->status & E1000_WRITING) { + msg.m_netdrv_net_dl_task.flags |= DL_PACK_SEND; + + /* Clear flags. */ + e->status &= ~(E1000_WRITING | E1000_TRANSMIT); + } + + /* Acknowledge to INET. */ + if ((r = ipc_send(e->client, &msg)) != OK) + panic("ipc_send() failed: %d", r); } -/*===========================================================================* - * mess_reply * - *===========================================================================*/ -static void mess_reply(req, reply_mess) -message *req; -message *reply_mess; +/* + * Send a reply to Inet. + */ +static void +mess_reply(message *req, message *reply_mess) { - if (ipc_send(req->m_source, reply_mess) != OK) - { - panic("unable to send reply message"); - } + + if (ipc_send(req->m_source, reply_mess) != OK) + panic("unable to send reply message"); }