From: David van Moolenbroek <david@minix3.org>
Date: Tue, 12 Feb 2013 13:52:52 +0000 (+0000)
Subject: ahci: centralize, fix port reset
X-Git-Tag: v3.2.1~10
X-Git-Url: http://zhaoyanbai.com/repos/%22http:/www.isc.org/icons/zlib_tech.html?a=commitdiff_plain;h=ad0b58fe835b996b6eba9b6df83b2e35071ef126;p=minix.git

ahci: centralize, fix port reset
---

diff --git a/drivers/ahci/ahci.c b/drivers/ahci/ahci.c
index c04e41bed..bbb47efdd 100644
--- a/drivers/ahci/ahci.c
+++ b/drivers/ahci/ahci.c
@@ -1192,6 +1192,21 @@ static ssize_t port_transfer(struct port_state *ps, u64_t pos, u64_t eof,
 	return size;
 }
 
+/*===========================================================================*
+ *				port_hardreset				     *
+ *===========================================================================*/
+static void port_hardreset(struct port_state *ps)
+{
+	/* Perform a port-level (hard) reset on the given port.
+	 */
+
+	port_write(ps, AHCI_PORT_SCTL, AHCI_PORT_SCTL_DET_INIT);
+
+	micro_delay(COMRESET_DELAY * 1000);	/* COMRESET_DELAY is in ms */
+
+	port_write(ps, AHCI_PORT_SCTL, AHCI_PORT_SCTL_DET_NONE);
+}
+
 /*===========================================================================*
  *				port_start				     *
  *===========================================================================*/
@@ -1242,20 +1257,18 @@ static void port_restart(struct port_state *ps)
 
 		dprintf(V_ERR, ("%s: port reset\n", ahci_portname(ps)));
 
-		/* Trigger a port reset. */
-		port_write(ps, AHCI_PORT_SCTL, AHCI_PORT_SCTL_DET_INIT);
-		micro_delay(SPINUP_DELAY * 1000);
-		port_write(ps, AHCI_PORT_SCTL, AHCI_PORT_SCTL_DET_NONE);
-
 		/* To keep this driver simple, we do not transparently recover
 		 * ongoing requests. Instead, we mark the failing device as
-		 * disconnected, and assume that if the reset succeeds, the
+		 * disconnected, and reset it. If the reset succeeds, the
 		 * device (or, perhaps, eventually, another device) will come
 		 * back up. Any current and future requests to this port will
 		 * be failed until the port is fully closed and reopened.
 		 */
 		port_disconnect(ps);
 
+		/* Trigger a port reset. */
+		port_hardreset(ps);
+
 		return;
 	}
 
@@ -1907,13 +1920,14 @@ static void port_init(struct port_state *ps)
 	/* Just listen for device status change events for now. */
 	port_write(ps, AHCI_PORT_IE, AHCI_PORT_IE_PRCE);
 
-	/* Perform a reset on the device. */
+	/* Enable device spin-up for HBAs that support staggered spin-up.
+	 * This is a no-op for HBAs that do not support it.
+	 */
 	cmd = port_read(ps, AHCI_PORT_CMD);
 	port_write(ps, AHCI_PORT_CMD, cmd | AHCI_PORT_CMD_SUD);
 
-	port_write(ps, AHCI_PORT_SCTL, AHCI_PORT_SCTL_DET_INIT);
-	micro_delay(SPINUP_DELAY * 1000);	/* SPINUP_DELAY is in ms */
-	port_write(ps, AHCI_PORT_SCTL, AHCI_PORT_SCTL_DET_NONE);
+	/* Trigger a port reset. */
+	port_hardreset(ps);
 
 	set_timer(&ps->cmd_info[0].timer, ahci_spinup_timeout,
 		port_timeout, BUILD_ARG(ps - port_state, 0));
diff --git a/drivers/ahci/ahci.h b/drivers/ahci/ahci.h
index 617619338..48b5f5318 100644
--- a/drivers/ahci/ahci.h
+++ b/drivers/ahci/ahci.h
@@ -15,7 +15,7 @@
 #define FLUSH_TIMEOUT		60000	/* time to wait for flush cmd (ms) */
 
 /* Time values that are defined by the standards. */
-#define SPINUP_DELAY		1	/* time to assert spin-up flag (ms) */
+#define COMRESET_DELAY		1	/* time to assert port reset (ms) */
 #define RESET_DELAY		1000	/* maximum HBA reset time (ms) */
 #define PORTREG_DELAY		500	/* maximum port register update (ms) */