From: AceVest <zhaoyanbai@126.com>
Date: Wed, 5 Jun 2019 02:29:04 +0000 (+0800)
Subject: F103RE GPIO
X-Git-Url: http://zhaoyanbai.com/repos/%22http:/www.isc.org/icons/zlib_tech.html?a=commitdiff_plain;h=93d23558a9ea11f8265fbb960b5876130383f529;p=acecode.git

F103RE GPIO
---

diff --git a/learn/stm32/F103RE/F103RE.elf.cfg b/learn/stm32/F103RE/F103RE.elf.cfg
new file mode 100644
index 0000000..a8296a7
--- /dev/null
+++ b/learn/stm32/F103RE/F103RE.elf.cfg
@@ -0,0 +1,30 @@
+# This is an genericBoard board with a single STM32F103RETx chip
+#
+# Generated by STM32CubeIDE
+# Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s)
+
+source [find interface/stlink-tcp.cfg]
+
+set WORKAREASIZE 0x8000
+
+transport select "hla_swd"
+
+set CHIPNAME STM32F103RETx
+set BOARDNAME genericBoard
+
+# Enable debug when in low power modes
+set ENABLE_LOW_POWER 1
+
+# Stop Watchdog counters when halt
+set STOP_WATCHDOG 1
+
+# STlink Debug clock frequency
+set CLOCK_FREQ 4000
+
+# use software system reset
+reset_config none
+set CONNECT_UNDER_RESET 0
+
+# BCTM CPU variables
+
+source [find target/stm32f1x.cfg]
diff --git a/learn/stm32/F103RE/F103RE.elf.launch b/learn/stm32/F103RE/F103RE.elf.launch
new file mode 100644
index 0000000..4e9145b
--- /dev/null
+++ b/learn/stm32/F103RE/F103RE.elf.launch
@@ -0,0 +1,72 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="com.st.stm32cube.ide.mcu.debug.launch.launchConfigurationType">
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_swv" value="false"/>
+<intAttribute key="com.st.stm32cube.ide.mcu.debug.launch.formatVersion" value="2"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.ip_address_local" value="localhost"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.remoteCommand" value="target remote"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startServer" value="true"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swd_mode" value="true"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_port" value="61235"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_div" value="8"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_hclk" value="16000000"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.useRemoteTarget" value="true"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_DEVICE_SHAREABLE_ALLOWED" value="true"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_INTERFACE" value="Swd"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_INTERFACE_FREQUENCY" value="4000000.0"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_LOW_POWER_MODE_ALLOWED" value="true"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_RESET_MODE" value="soft"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_STOP_WATCHDOG_THEN_HALTED_ALLOWED" value="true"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.OPENOCD_GENERATOR_OPTION" value="true"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.OPENOCD_NAME" value="&quot;${stm32cubeide_openocd_path}/openocd&quot;"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.OPENOCD_OTHER_OPTIONS" value=""/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.OPENOCD_SCRIPT" value="${ProjDirPath}/F103RE.elf.cfg"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.OPENOCD_SCRIPT_CHOICE" value="automated"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.ST-LINK" value="48FF72066767555730381267"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_external_loader" value="false"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_logging" value="false"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_shared_stlink" value="false"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.external_loader" value=""/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.log_file" value="/Users/ace/workspace/acecode/learn/stm32/F103RE/Debug/st-link_gdbserver_log.txt"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_ap_id" value="0"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_check_serial_number" value="false"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_txt_serial_number" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="false"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="ST-LINK (OpenOCD)"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="${TOOLCHAIN_PATH}/arm-none-eabi-gdb"/>
+<booleanAttribute key="org.eclipse.cdt.dsf.gdb.NON_STOP" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="remote"/>
+<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/F103RE.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="F103RE"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value=""/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/F103RE"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;memoryBlockExpressionList context=&quot;reserved-for-future-use&quot;/&gt;&#10;"/>
+<stringAttribute key="process_factory_id" value="org.eclipse.cdt.dsf.gdb.GdbProcessFactory"/>
+</launchConfiguration>
diff --git a/learn/stm32/F103RE/Src/main.c b/learn/stm32/F103RE/Src/main.c
index 8458d3e..4555c88 100644
--- a/learn/stm32/F103RE/Src/main.c
+++ b/learn/stm32/F103RE/Src/main.c
@@ -96,6 +96,8 @@ int main(void)
   /* USER CODE BEGIN WHILE */
   while (1)
   {
+	  HAL_GPIO_TogglePin(LED1_GPIO_Port, LED1_Pin);
+	  HAL_Delay(100);
     /* USER CODE END WHILE */
 
     /* USER CODE BEGIN 3 */