From: Michal Maka <mmaka@jpembedded.eu>
Date: Tue, 13 Aug 2013 15:01:14 +0000 (+0200)
Subject: beaglebone ethernet improvements
X-Git-Tag: v3.3.0~837
X-Git-Url: http://zhaoyanbai.com/repos/%22http:/www.isc.org/icons/zlib_tech.html?a=commitdiff_plain;h=0c044c6b02c4ca3f0b9dcea7283b092054e2309a;p=minix.git

beaglebone ethernet improvements

	. added enable interrupts routine at the HW init stage
	. remove workaround, obsoleted by libnetdriver change
	. change netconf.sh to allow configuring this driver,
	  changed README.txt to reflect this

Change-Id: Ib659d5a55be96022b5e9013caa556dca5092ce89
---

diff --git a/commands/netconf/netconf.sh b/commands/netconf/netconf.sh
index c435379af..c9f75ad9f 100644
--- a/commands/netconf/netconf.sh
+++ b/commands/netconf/netconf.sh
@@ -99,17 +99,18 @@ card()
 	printf "%2d. %s %s\n" "$card_number" "$card_mark" "$card_name"
 }
 
-first_pcicard=4
+first_pcicard=5
 
 cards()
 {
     # Run lspci once to a temp file for use in 'card' function
-    lspci >$LSPCI || exit
+    lspci >$LSPCI 2>/dev/null || true
 
     card 0 "No Ethernet card (no networking)"
     card 1 "3Com 501 or 3Com 509 based card"
     card 2 "Realtek 8029 based card (also emulated by Qemu)" "10EC:8029"
     card 3 "NE2000, 3com 503 or WD based card (also emulated by Bochs)"
+    card 4 "lan8710a (on BeagleBone, BeagleBone Black)"
     n=$first_pcicard
     for pcicard in $pci_list
     do	var=\$pci_descr$pcicard; descr="`eval echo $var`"
@@ -201,6 +202,7 @@ drv_params()
            test "$v" = 1 && echo "Note: After installing, edit $LOCALRC to the right configuration."
            test "$v" = 1 && echo " chose option 4, the defaults for emulation by Bochs have been set."
 		;;
+	4) driver=lan8710a;	;;
         $first_after_pci) driver="psip0"; ;;    
         *) warn "choose a number"
       esac
diff --git a/drivers/lan8710a/README.txt b/drivers/lan8710a/README.txt
index 6b6e6e990..7dc461a0d 100644
--- a/drivers/lan8710a/README.txt
+++ b/drivers/lan8710a/README.txt
@@ -8,14 +8,9 @@ created July 2013, JPEmbedded (info@jpembedded.eu)
 --------------------------------------------------------------------------------
 *                           INSTALLATION:                                      *
 --------------------------------------------------------------------------------
-To install LAN8710A for BeagleBone under MINIX you have to edit /etc/inet.conf
-by adding line:
-eth0 lan8710a 0 { default; };
-and changing:
-psip0 { default; };
-to:
-psip1;
-Restart the system and the driver should work.
+To install LAN8710A for BeagleBone under MINIX you execute 'netconf' as
+usual.  Select the LAN8710A driver from the list.  Restart the system
+and the driver should work.
 
 --------------------------------------------------------------------------------
 *                                 TESTS:                                       *
diff --git a/drivers/lan8710a/lan8710a.c b/drivers/lan8710a/lan8710a.c
index 506236f15..d355f55ef 100644
--- a/drivers/lan8710a/lan8710a.c
+++ b/drivers/lan8710a/lan8710a.c
@@ -58,7 +58,6 @@ main(int argc, char *argv[])
 	message m;
 	int r;
 	int ipc_status;
-	static int rx_first_enabled = FALSE;
 
 	/* SEF local startup */
 	env_setargs(argc, argv);
@@ -90,18 +89,6 @@ main(int argc, char *argv[])
 				break;
 			case DL_GETSTAT_S:
 				lan8710a_getstat(&m);
-				/*
-				 * Workaround:
-				 * Re-enabling interrupts here is made to avoid
-				 * problem that Rx interrupt came when it can't
-				 * be handled. When this problem occurs next Rx
-				 * interrupts don't appear.
-				 */
-				 if(rx_first_enabled == FALSE) {
-					rx_first_enabled = TRUE;
-					lan8710a_enable_interrupt(RX_INT |
-								  TX_INT);
-				}
 				break;
 			default:
 				panic("Illegal message: %d", m.m_type);
@@ -796,6 +783,9 @@ lan8710a_init_hw(void)
 
 	/* GMII RX and TX release from reset. */
 	lan8710a_reg_set(CPSW_SL_MACCONTROL(1), CPSW_SL_GMII_EN);
+	
+	/* Enable interrupts. */
+	lan8710a_enable_interrupt(RX_INT | TX_INT);
 
 	return TRUE;
 }