--- /dev/null
+#ifndef SB16_H
+#define SB16_H
+
+#define SB_DEBUG 0 /* 1 = print debug info */
+#define SB_DEBUG_2 0 /* 1 = print more debug info */
+
+#define SB_TIMEOUT 32000 /* timeout count */
+
+/* IRQ, base address and DMA channels */
+#define SB_IRQ 7
+#define SB_BASE_ADDR 0x220 /* 0x210, 0x220, 0x230, 0x240,
+ * 0x250, 0x260, 0x280
+ */
+#define SB_DMA_8 1 /* 0, 1, 3 */
+#define SB_DMA_16 5 /* 5, 6, 7 */
+#if _WORD_SIZE == 2
+#define DMA_SIZE 8192 /* Dma buffer MUST BE MULTIPLE OF 2 */
+#else
+#define DMA_SIZE (64 * 1024) /* Dma buffer MUST BE MULTIPLE OF 2 */
+#endif
+
+/* Some defaults for the DSP */
+#define DEFAULT_SPEED 22050 /* Sample rate */
+#define DEFAULT_BITS 8 /* Nr. of bits */
+#define DEFAULT_SIGN 0 /* 0 = unsigned, 1 = signed */
+#define DEFAULT_STEREO 0 /* 0 = mono, 1 = stereo */
+
+/* DMA port addresses */
+#define DMA8_ADDR ((SB_DMA_8 & 3) << 1) + 0x00
+#define DMA8_COUNT ((SB_DMA_8 & 3) << 1) + 0x01
+#define DMA8_MASK 0x0A
+#define DMA8_MODE 0x0B
+#define DMA8_CLEAR 0x0C
+
+
+/* If after this preprocessing stuff DMA8_PAGE is not defined
+ * the 8-bit DMA channel specified is not valid
+ */
+#if SB_DMA_8 == 0
+# define DMA8_PAGE 0x87
+#else
+# if SB_DMA_8 == 1
+# define DMA8_PAGE 0x83
+# else
+# if SB_DMA_8 == 3
+# define DMA8_PAGE 0x82
+# endif
+# endif
+#endif
+
+
+#define DMA16_ADDR ((SB_DMA_16 & 3) << 2) + 0xC0
+#define DMA16_COUNT ((SB_DMA_16 & 3) << 2) + 0xC2
+#define DMA16_MASK 0xD4
+#define DMA16_MODE 0xD6
+#define DMA16_CLEAR 0xD8
+
+
+/* If after this preprocessing stuff DMA16_PAGE is not defined
+ * the 16-bit DMA channel specified is not valid
+ */
+#if SB_DMA_16 == 5
+# define DMA16_PAGE 0x8B
+#else
+# if SB_DMA_16 == 6
+# define DMA16_PAGE 0x89
+# else
+# if SB_DMA_16 == 7
+# define DMA16_PAGE 0x8A
+# endif
+# endif
+#endif
+
+
+/* DMA modes */
+#define DMA16_AUTO_PLAY 0x58 + (SB_DMA_16 & 3)
+#define DMA16_AUTO_REC 0x54 + (SB_DMA_16 & 3)
+#define DMA8_AUTO_PLAY 0x58 + SB_DMA_8
+#define DMA8_AUTO_REC 0x54 + SB_DMA_8
+
+
+/* IO ports for soundblaster */
+#define DSP_RESET 0x6 + SB_BASE_ADDR
+#define DSP_READ 0xA + SB_BASE_ADDR
+#define DSP_WRITE 0xC + SB_BASE_ADDR
+#define DSP_COMMAND 0xC + SB_BASE_ADDR
+#define DSP_STATUS 0xC + SB_BASE_ADDR
+#define DSP_DATA_AVL 0xE + SB_BASE_ADDR
+#define DSP_DATA16_AVL 0xF + SB_BASE_ADDR
+#define MIXER_REG 0x4 + SB_BASE_ADDR
+#define MIXER_DATA 0x5 + SB_BASE_ADDR
+#define OPL3_LEFT 0x0 + SB_BASE_ADDR
+#define OPL3_RIGHT 0x2 + SB_BASE_ADDR
+#define OPL3_BOTH 0x8 + SB_BASE_ADDR
+
+
+/* DSP Commands */
+#define DSP_INPUT_RATE 0x42 /* set input sample rate */
+#define DSP_OUTPUT_RATE 0x41 /* set output sample rate */
+#define DSP_CMD_SPKON 0xD1 /* set speaker on */
+#define DSP_CMD_SPKOFF 0xD3 /* set speaker off */
+#define DSP_CMD_DMA8HALT 0xD0 /* halt DMA 8-bit operation */
+#define DSP_CMD_DMA8CONT 0xD4 /* continue DMA 8-bit operation */
+#define DSP_CMD_DMA16HALT 0xD5 /* halt DMA 16-bit operation */
+#define DSP_CMD_DMA16CONT 0xD6 /* continue DMA 16-bit operation */
+#define DSP_GET_VERSION 0xE1 /* get version number of DSP */
+#define DSP_CMD_8BITAUTO_IN 0xCE /* 8 bit auto-initialized input */
+#define DSP_CMD_8BITAUTO_OUT 0xC6 /* 8 bit auto-initialized output */
+#define DSP_CMD_16BITAUTO_IN 0xBE /* 16 bit auto-initialized input */
+#define DSP_CMD_16BITAUTO_OUT 0xB6 /* 16 bit auto-initialized output */
+#define DSP_CMD_IRQREQ8 0xF2 /* Interrupt request 8 bit */
+#define DSP_CMD_IRQREQ16 0xF3 /* Interrupt request 16 bit */
+
+
+/* DSP Modes */
+#define DSP_MODE_MONO_US 0x00 /* Mono unsigned */
+#define DSP_MODE_MONO_S 0x10 /* Mono signed */
+#define DSP_MODE_STEREO_US 0x20 /* Stereo unsigned */
+#define DSP_MODE_STEREO_S 0x30 /* Stereo signed */
+
+
+/* MIXER commands */
+#define MIXER_RESET 0x00 /* Reset */
+#define MIXER_DAC_LEVEL 0x04 /* Used for detection only */
+#define MIXER_MASTER_LEFT 0x30 /* Master volume left */
+#define MIXER_MASTER_RIGHT 0x31 /* Master volume right */
+#define MIXER_DAC_LEFT 0x32 /* Dac level left */
+#define MIXER_DAC_RIGHT 0x33 /* Dac level right */
+#define MIXER_FM_LEFT 0x34 /* Fm level left */
+#define MIXER_FM_RIGHT 0x35 /* Fm level right */
+#define MIXER_CD_LEFT 0x36 /* Cd audio level left */
+#define MIXER_CD_RIGHT 0x37 /* Cd audio level right */
+#define MIXER_LINE_LEFT 0x38 /* Line in level left */
+#define MIXER_LINE_RIGHT 0x39 /* Line in level right */
+#define MIXER_MIC_LEVEL 0x3A /* Microphone level */
+#define MIXER_PC_LEVEL 0x3B /* Pc speaker level */
+#define MIXER_OUTPUT_CTRL 0x3C /* Output control */
+#define MIXER_IN_LEFT 0x3D /* Input control left */
+#define MIXER_IN_RIGHT 0x3E /* Input control right */
+#define MIXER_GAIN_IN_LEFT 0x3F /* Input gain control left */
+#define MIXER_GAIN_IN_RIGHT 0x40 /* Input gain control right */
+#define MIXER_GAIN_OUT_LEFT 0x41 /* Output gain control left */
+#define MIXER_GAIN_OUT_RIGHT 0x42 /* Output gain control rigth */
+#define MIXER_AGC 0x43 /* Automatic gain control */
+#define MIXER_TREBLE_LEFT 0x44 /* Treble left */
+#define MIXER_TREBLE_RIGHT 0x45 /* Treble right */
+#define MIXER_BASS_LEFT 0x46 /* Bass left */
+#define MIXER_BASS_RIGHT 0x47 /* Bass right */
+#define MIXER_SET_IRQ 0x80 /* Set irq number */
+#define MIXER_SET_DMA 0x81 /* Set DMA channels */
+#define MIXER_IRQ_STATUS 0x82 /* Irq status */
+
+/* Mixer constants */
+#define MIC 0x01 /* Microphone */
+#define CD_RIGHT 0x02
+#define CD_LEFT 0x04
+#define LINE_RIGHT 0x08
+#define LINE_LEFT 0x10
+#define FM_RIGHT 0x20
+#define FM_LEFT 0x40
+
+/* DSP constants */
+#define DMA_NR_OF_BUFFERS 2
+#define DSP_MAX_SPEED 44100 /* Max sample speed in KHz */
+#define DSP_MIN_SPEED 4000 /* Min sample speed in KHz */
+#define DSP_MAX_FRAGMENT_SIZE DMA_SIZE / DMA_NR_OF_BUFFERS /* Maximum fragment size */
+#define DSP_MIN_FRAGMENT_SIZE 1024 /* Minimum fragment size */
+#define DSP_NR_OF_BUFFERS 8
+
+
+/* Number of bytes you can DMA before hitting a 64K boundary: */
+#define dma_bytes_left(phys) \
+ ((unsigned) (sizeof(int) == 2 ? 0 : 0x10000) - (unsigned) ((phys) & 0xFFFF))
+
+
+#endif /* SB16_H */
--- /dev/null
+#include "sb16.h"
+#include "../drivers.h"
+#include <sys/ioc_sound.h>
+
+_PROTOTYPE(void main, (void));
+FORWARD _PROTOTYPE( int dsp_open, (void) );
+FORWARD _PROTOTYPE( int dsp_close, (void) );
+FORWARD _PROTOTYPE( int dsp_ioctl, (message *m_ptr) );
+FORWARD _PROTOTYPE( void dsp_write, (message *m_ptr) );
+FORWARD _PROTOTYPE( void dsp_hardware_msg, (void) );
+FORWARD _PROTOTYPE( void dsp_status, (message *m_ptr) );
+
+FORWARD _PROTOTYPE( void reply, (int code, int replyee, int process, int status) );
+FORWARD _PROTOTYPE( void init_buffer, (void) );
+FORWARD _PROTOTYPE( int dsp_inb, (int port) );
+FORWARD _PROTOTYPE( void dsp_outb, (int port, int value) );
+FORWARD _PROTOTYPE( int dsp_init, (void) );
+FORWARD _PROTOTYPE( int dsp_reset, (void) );
+FORWARD _PROTOTYPE( int dsp_command, (int value) );
+FORWARD _PROTOTYPE( int dsp_set_size, (unsigned int size) );
+FORWARD _PROTOTYPE( int dsp_set_speed, (unsigned int speed) );
+FORWARD _PROTOTYPE( int dsp_set_stereo, (unsigned int stereo) );
+FORWARD _PROTOTYPE( int dsp_set_bits, (unsigned int bits) );
+FORWARD _PROTOTYPE( int dsp_set_sign, (unsigned int sign) );
+FORWARD _PROTOTYPE( void dsp_dma_setup, (phys_bytes address, int count) );
+FORWARD _PROTOTYPE( void dsp_setup, (void) );
+_PROTOTYPE(int mixer_set, (int reg, int data));
+
+PRIVATE int irq_hook_id; /* id of irq hook at the kernel */
+
+PRIVATE char DmaBuffer[DMA_SIZE + 64 * 1024];
+PRIVATE char* DmaPtr;
+PRIVATE phys_bytes DmaPhys;
+
+PRIVATE char Buffer[DSP_MAX_FRAGMENT_SIZE * DSP_NR_OF_BUFFERS];
+
+PRIVATE int DspVersion[2];
+PRIVATE unsigned int DspStereo = DEFAULT_STEREO;
+PRIVATE unsigned int DspSpeed = DEFAULT_SPEED;
+PRIVATE unsigned int DspBits = DEFAULT_BITS;
+PRIVATE unsigned int DspSign = DEFAULT_SIGN;
+PRIVATE unsigned int DspFragmentSize = DSP_MAX_FRAGMENT_SIZE;
+PRIVATE int DspAvail = 0;
+PRIVATE int DspBusy = 0;
+PRIVATE int DmaDone = 1;
+PRIVATE int DmaMode = 0;
+PRIVATE int DmaBusy = -1;
+PRIVATE int DmaFillNext = 0;
+PRIVATE int BufReadNext = -1;
+PRIVATE int BufFillNext = 0;
+
+PRIVATE int revivePending = 0;
+PRIVATE int reviveStatus;
+PRIVATE int reviveProcNr;
+
+#define dprint (void)
+
+
+/*===========================================================================*
+ * main
+ *===========================================================================*/
+PUBLIC void main()
+{
+ int r, caller, proc_nr, s;
+ message mess;
+
+ dprint("sb16_dsp.c: main()\n");
+
+ /* Get a DMA buffer. */
+ init_buffer();
+
+ while(TRUE) {
+ /* Wait for an incoming message */
+ receive(ANY, &mess);
+
+ caller = mess.m_source;
+ proc_nr = mess.PROC_NR;
+
+ /* Now carry out the work. */
+ switch(mess.m_type) {
+ case DEV_OPEN: r = dsp_open(); break;
+ case DEV_CLOSE: r = dsp_close(); break;
+ case DEV_IOCTL: r = dsp_ioctl(&mess); break;
+
+ case DEV_READ: r = EINVAL; break; /* Not yet implemented */
+ case DEV_WRITE: dsp_write(&mess); continue; /* don't reply */
+
+ case DEV_STATUS: dsp_status(&mess); continue; /* don't reply */
+ case HARD_INT: dsp_hardware_msg(); continue; /* don't reply */
+ case SYS_SIG: continue; /* don't reply */
+ default: r = EINVAL;
+ }
+
+ /* Finally, prepare and send the reply message. */
+ reply(TASK_REPLY, caller, proc_nr, r);
+ }
+
+}
+
+
+/*===========================================================================*
+ * dsp_open
+ *===========================================================================*/
+PRIVATE int dsp_open()
+{
+ dprint("sb16_dsp.c: dsp_open()\n");
+
+ /* try to detect SoundBlaster card */
+ if(!DspAvail && dsp_init() != OK) return EIO;
+
+ /* Only one open at a time with soundcards */
+ if(DspBusy) return EBUSY;
+
+ /* Start with a clean DSP */
+ if(dsp_reset() != OK) return EIO;
+
+ /* Setup default values */
+ DspStereo = DEFAULT_STEREO;
+ DspSpeed = DEFAULT_SPEED;
+ DspBits = DEFAULT_BITS;
+ DspSign = DEFAULT_SIGN;
+ DspFragmentSize = DMA_SIZE / 2;
+
+ DspBusy = 1;
+
+ return OK;
+}
+
+
+/*===========================================================================*
+ * dsp_close
+ *===========================================================================*/
+PRIVATE int dsp_close()
+{
+ dprint("sb16_dsp.c: dsp_close()\n");
+
+ DspBusy = 0; /* soundcard available again */
+
+ return OK;
+}
+
+
+/*===========================================================================*
+ * dsp_ioctl
+ *===========================================================================*/
+PRIVATE int dsp_ioctl(m_ptr)
+message *m_ptr;
+{
+ int status;
+ phys_bytes user_phys;
+ unsigned int val;
+
+ dprint("sb16_dsp.c: dsp_ioctl()\n");
+
+ /* Cannot change parameters during play or recording */
+ if(DmaBusy >= 0) return EBUSY;
+
+ /* Get user data */
+ if(m_ptr->REQUEST != DSPIORESET) {
+ sys_vircopy(m_ptr->PROC_NR, D, (vir_bytes)m_ptr->ADDRESS, SELF, D, (vir_bytes)&val, sizeof(val));
+ }
+
+ dprint("dsp_ioctl: got ioctl %d, argument: %d\n", m_ptr->REQUEST, val);
+
+ switch(m_ptr->REQUEST) {
+ case DSPIORATE: status = dsp_set_speed(val); break;
+ case DSPIOSTEREO: status = dsp_set_stereo(val); break;
+ case DSPIOBITS: status = dsp_set_bits(val); break;
+ case DSPIOSIZE: status = dsp_set_size(val); break;
+ case DSPIOSIGN: status = dsp_set_sign(val); break;
+ case DSPIOMAX:
+ val = DSP_MAX_FRAGMENT_SIZE;
+ sys_vircopy(SELF, D, (vir_bytes)&val, m_ptr->PROC_NR, D, (vir_bytes)m_ptr->ADDRESS, sizeof(val));
+ status = OK;
+ break;
+ case DSPIORESET: status = dsp_reset(); break;
+ default: status = ENOTTY; break;
+ }
+
+ return status;
+}
+
+
+/*===========================================================================*
+ * dsp_write
+ *===========================================================================*/
+PRIVATE void dsp_write(m_ptr)
+message *m_ptr;
+{
+ int s;
+ message mess;
+
+ dprint("sb16_dsp.c: dsp_write()\n");
+
+ if(m_ptr->COUNT != DspFragmentSize) {
+ reply(TASK_REPLY, m_ptr->m_source, m_ptr->PROC_NR, EINVAL);
+ return;
+ }
+
+ reply(TASK_REPLY, m_ptr->m_source, m_ptr->PROC_NR, SUSPEND);
+
+ if(DmaBusy < 0) { /* Dma tranfer not yet started */
+
+ DmaMode = DEV_WRITE; /* Dma mode is writing */
+ sys_datacopy(m_ptr->PROC_NR, (vir_bytes)m_ptr->ADDRESS, SELF, (vir_bytes)DmaPtr, (phys_bytes)DspFragmentSize);
+ dsp_dma_setup(DmaPhys, DspFragmentSize * DMA_NR_OF_BUFFERS);
+ dsp_setup();
+ DmaBusy = 0; /* Dma is busy */
+ dprint(" filled dma[0]\n");
+ DmaFillNext = 1;
+
+ } else if(DmaBusy != DmaFillNext) { /* Dma transfer started, but Dma buffer not yet full */
+
+ sys_datacopy(m_ptr->PROC_NR, (vir_bytes)m_ptr->ADDRESS, SELF, (vir_bytes)DmaPtr + DmaFillNext * DspFragmentSize, (phys_bytes)DspFragmentSize);
+ dprint(" filled dma[%d]\n", DmaFillNext);
+ DmaFillNext = (DmaFillNext + 1) % DMA_NR_OF_BUFFERS;
+
+ } else if(BufReadNext < 0) { /* Dma buffer full, fill first element of second buffer */
+
+ sys_datacopy(m_ptr->PROC_NR, (vir_bytes)m_ptr->ADDRESS, SELF, (vir_bytes)Buffer, (phys_bytes)DspFragmentSize);
+ dprint(" filled buf[0]\n");
+ BufReadNext = 0;
+ BufFillNext = 1;
+
+ } else { /* Dma buffer is full, filling second buffer */
+
+ while(BufReadNext == BufFillNext) { /* Second buffer also full, wait for space to become available */
+ receive(HARDWARE, &mess);
+ dsp_hardware_msg();
+ }
+ sys_datacopy(m_ptr->PROC_NR, (vir_bytes)m_ptr->ADDRESS, SELF, (vir_bytes)Buffer + BufFillNext * DspFragmentSize, (phys_bytes)DspFragmentSize);
+ dprint(" filled buf[%d]\n", BufFillNext);
+ BufFillNext = (BufFillNext + 1) % DSP_NR_OF_BUFFERS;
+
+ }
+
+ revivePending = 1;
+ reviveStatus = DspFragmentSize;
+ reviveProcNr = m_ptr->PROC_NR;
+ notify(m_ptr->m_source);
+}
+
+
+/*===========================================================================*
+ * dsp_hardware_msg
+ *===========================================================================*/
+PRIVATE void dsp_hardware_msg()
+{
+ dprint("Interrupt: ");
+ if(DmaBusy >= 0) { /* Dma transfer was actually busy */
+ dprint("Finished playing dma[%d]; ", DmaBusy);
+ DmaBusy = (DmaBusy + 1) % DMA_NR_OF_BUFFERS;
+ if(DmaBusy == DmaFillNext) { /* Dma buffer empty, stop Dma transfer */
+ dsp_command((DspBits == 8 ? DSP_CMD_DMA8HALT : DSP_CMD_DMA16HALT));
+ dprint("No more work...!\n");
+ DmaBusy = -1;
+ } else if(BufReadNext >= 0) { /* Data in second buffer, copy one fragment to Dma buffer */
+ memcpy(DmaPtr + DmaFillNext * DspFragmentSize, Buffer + BufReadNext * DspFragmentSize, DspFragmentSize);
+ dprint("copy buf[%d] -> dma[%d]; ", BufReadNext, DmaFillNext);
+ BufReadNext = (BufReadNext + 1) % DSP_NR_OF_BUFFERS;
+ DmaFillNext = (DmaFillNext + 1) % DMA_NR_OF_BUFFERS;
+ if(BufReadNext == BufFillNext) {
+ BufReadNext = -1;
+ }
+ dprint("Starting dma[%d]\n", DmaBusy);
+ } else { /* Second buffer empty, still data in Dma buffer, continue playback */
+ dprint("Starting dma[%d]\n", DmaBusy);
+ }
+ }
+
+ /* Acknowledge the interrupt on the DSP */
+ dsp_inb((DspBits == 8 ? DSP_DATA_AVL : DSP_DATA16_AVL));
+}
+
+
+/*===========================================================================*
+ * dsp_status *
+ *===========================================================================*/
+PRIVATE void dsp_status(m_ptr)
+message *m_ptr; /* pointer to the newly arrived message */
+{
+ if(revivePending) {
+ m_ptr->m_type = DEV_REVIVE; /* build message */
+ m_ptr->REP_PROC_NR = reviveProcNr;
+ m_ptr->REP_STATUS = reviveStatus;
+
+ revivePending = 0; /* unmark event */
+ } else {
+ m_ptr->m_type = DEV_NO_STATUS;
+ }
+
+ send(m_ptr->m_source, m_ptr); /* send the message */
+}
+
+
+/*===========================================================================*
+ * reply *
+ *===========================================================================*/
+PRIVATE void reply(code, replyee, process, status)
+int code;
+int replyee;
+int process;
+int status;
+{
+ message m;
+
+ m.m_type = code; /* TASK_REPLY or REVIVE */
+ m.REP_STATUS = status; /* result of device operation */
+ m.REP_PROC_NR = process; /* which user made the request */
+
+ send(replyee, &m);
+}
+
+
+/*===========================================================================*
+ * init_buffer
+ *===========================================================================*/
+PRIVATE void init_buffer()
+{
+/* Select a buffer that can safely be used for dma transfers.
+ * Its absolute address is 'DmaPhys', the normal address is 'DmaPtr'.
+ */
+
+#if (CHIP == INTEL)
+ unsigned left;
+
+ DmaPtr = DmaBuffer;
+ sys_umap(SELF, D, (vir_bytes)DmaBuffer, (phys_bytes)sizeof(DmaBuffer), &DmaPhys);
+
+ if((left = dma_bytes_left(DmaPhys)) < DMA_SIZE) {
+ /* First half of buffer crosses a 64K boundary, can't DMA into that */
+ DmaPtr += left;
+ DmaPhys += left;
+ }
+#else /* CHIP != INTEL */
+ panic("SB16DSP","init_buffer() failed, CHIP != INTEL", 0);
+#endif /* CHIP == INTEL */
+}
+
+
+/*===========================================================================*
+ * dsp_inb
+ *===========================================================================*/
+PRIVATE int dsp_inb(port)
+int port;
+{
+ int s, value = -1;
+
+ if ((s=sys_inb(port, &value)) != OK)
+ panic("SB16DSP","sys_inb() failed", s);
+
+ return value;
+}
+
+
+/*===========================================================================*
+ * dsp_outb
+ *===========================================================================*/
+PRIVATE void dsp_outb(port, value)
+int port;
+int value;
+{
+ int s;
+
+ if ((s=sys_outb(port, value)) != OK)
+ panic("SB16DSP","sys_outb() failed", s);
+}
+
+
+/*===========================================================================*
+ * dsp_init
+ *===========================================================================*/
+PRIVATE int dsp_init()
+{
+ int i, s;
+
+ if(dsp_reset () != OK) {
+ dprint("sb16: No SoundBlaster card detected\n");
+ return -1;
+ }
+
+ DspVersion[0] = DspVersion[1] = 0;
+ dsp_command(DSP_GET_VERSION); /* Get DSP version bytes */
+
+ for(i = 1000; i; i--) {
+ if(dsp_inb(DSP_DATA_AVL) & 0x80) {
+ if(DspVersion[0] == 0) {
+ DspVersion[0] = dsp_inb(DSP_READ);
+ } else {
+ DspVersion[1] = dsp_inb(DSP_READ);
+ break;
+ }
+ }
+ }
+
+ if(DspVersion[0] < 4) {
+ dprint("sb16: No SoundBlaster 16 compatible card detected\n");
+ return -1;
+ }
+
+ dprint("sb16: SoundBlaster DSP version %d.%d detected\n", DspVersion[0], DspVersion[1]);
+
+ /* set SB to use our IRQ and DMA channels */
+ mixer_set(MIXER_SET_IRQ, (1 << (SB_IRQ / 2 - 1)));
+ mixer_set(MIXER_SET_DMA, (1 << SB_DMA_8 | 1 << SB_DMA_16));
+
+ /* register interrupt vector and enable irq */
+ if ((s=sys_irqsetpolicy(SB_IRQ, IRQ_REENABLE, &irq_hook_id )) != OK)
+ panic("SB16DSP", "Couldn't set IRQ policy", s);
+ if ((s=sys_irqenable(&irq_hook_id)) != OK)
+ panic("SB16DSP", "Couldn't enable IRQ", s);
+
+ DspAvail = 1;
+ return OK;
+}
+
+
+/*===========================================================================*
+ * dsp_reset
+ *===========================================================================*/
+PRIVATE int dsp_reset()
+{
+ int i;
+
+ dsp_outb(DSP_RESET, 1);
+ for(i = 0; i < 1000; i++); /* wait a while */
+ dsp_outb(DSP_RESET, 0);
+
+ for(i = 0; i < 1000 && !(dsp_inb(DSP_DATA_AVL) & 0x80); i++);
+
+ if(dsp_inb(DSP_READ) != 0xAA) return EIO; /* No SoundBlaster */
+
+ DmaBusy = -1;
+ DmaDone = 1;
+
+ return OK;
+}
+
+
+/*===========================================================================*
+ * dsp_command
+ *===========================================================================*/
+PRIVATE int dsp_command(value)
+int value;
+{
+ int i, status;
+
+ for (i = 0; i < SB_TIMEOUT; i++) {
+ if((dsp_inb(DSP_STATUS) & 0x80) == 0) {
+ dsp_outb(DSP_COMMAND, value);
+ return OK;
+ }
+ }
+
+ dprint("sb16: SoundBlaster: DSP Command(%x) timeout\n", value);
+ return -1;
+}
+
+
+/*===========================================================================*
+ * dsp_set_size
+ *===========================================================================*/
+static int dsp_set_size(size)
+unsigned int size;
+{
+ dprint("dsp_set_size(): set fragment size to %u\n", size);
+
+ /* Sanity checks */
+ if(size < DSP_MIN_FRAGMENT_SIZE || size > DSP_MAX_FRAGMENT_SIZE || size % 2 != 0) {
+ return EINVAL;
+ }
+
+ DspFragmentSize = size;
+
+ return OK;
+}
+
+
+/*===========================================================================*
+ * dsp_set_speed
+ *===========================================================================*/
+static int dsp_set_speed(speed)
+unsigned int speed;
+{
+ dprint("sb16: setting speed to %u, stereo = %d\n", speed, DspStereo);
+
+ if(speed < DSP_MIN_SPEED || speed > DSP_MAX_SPEED) {
+ return EPERM;
+ }
+
+ /* Soundblaster 16 can be programmed with real sample rates
+ * instead of time constants
+ *
+ * Since you cannot sample and play at the same time
+ * we set in- and output rate to the same value
+ */
+
+ dsp_command(DSP_INPUT_RATE); /* set input rate */
+ dsp_command(speed >> 8); /* high byte of speed */
+ dsp_command(speed); /* low byte of speed */
+ dsp_command(DSP_OUTPUT_RATE); /* same for output rate */
+ dsp_command(speed >> 8);
+ dsp_command(speed);
+
+ DspSpeed = speed;
+
+ return OK;
+}
+
+
+/*===========================================================================*
+ * dsp_set_stereo
+ *===========================================================================*/
+static int dsp_set_stereo(stereo)
+unsigned int stereo;
+{
+ if(stereo) {
+ DspStereo = 1;
+ } else {
+ DspStereo = 0;
+ }
+
+ return OK;
+}
+
+
+/*===========================================================================*
+ * dsp_set_bits
+ *===========================================================================*/
+static int dsp_set_bits(bits)
+unsigned int bits;
+{
+ /* Sanity checks */
+ if(bits != 8 && bits != 16) {
+ return EINVAL;
+ }
+
+ DspBits = bits;
+
+ return OK;
+}
+
+
+/*===========================================================================*
+ * dsp_set_sign
+ *===========================================================================*/
+static int dsp_set_sign(sign)
+unsigned int sign;
+{
+ dprint("sb16: set sign to %u\n", sign);
+
+ DspSign = (sign > 0 ? 1 : 0);
+
+ return OK;
+}
+
+
+/*===========================================================================*
+ * dsp_dma_setup
+ *===========================================================================*/
+PRIVATE void dsp_dma_setup(address, count)
+phys_bytes address;
+int count;
+{
+ dprint("Setting up %d bit DMA\n", DspBits);
+
+ if(DspBits == 8) { /* 8 bit sound */
+ count--;
+
+ dsp_outb(DMA8_MASK, SB_DMA_8 | 0x04); /* Disable DMA channel */
+ dsp_outb(DMA8_CLEAR, 0x00); /* Clear flip flop */
+
+ /* set DMA mode */
+ dsp_outb(DMA8_MODE, (DmaMode == DEV_WRITE ? DMA8_AUTO_PLAY : DMA8_AUTO_REC));
+
+ dsp_outb(DMA8_ADDR, address >> 0); /* Low_byte of address */
+ dsp_outb(DMA8_ADDR, address >> 8); /* High byte of address */
+ dsp_outb(DMA8_PAGE, address >> 16); /* 64K page number */
+ dsp_outb(DMA8_COUNT, count >> 0); /* Low byte of count */
+ dsp_outb(DMA8_COUNT, count >> 8); /* High byte of count */
+ dsp_outb(DMA8_MASK, SB_DMA_8); /* Enable DMA channel */
+ } else { /* 16 bit sound */
+ count-= 2;
+
+ dsp_outb(DMA16_MASK, (SB_DMA_16 & 3) | 0x04); /* Disable DMA channel */
+ dsp_outb(DMA16_CLEAR, 0x00); /* Clear flip flop */
+
+ /* Set dma mode */
+ dsp_outb(DMA16_MODE, (DmaMode == DEV_WRITE ? DMA16_AUTO_PLAY : DMA16_AUTO_REC));
+
+ dsp_outb(DMA16_ADDR, (address >> 1) & 0xFF); /* Low_byte of address */
+ dsp_outb(DMA16_ADDR, (address >> 9) & 0xFF); /* High byte of address */
+ dsp_outb(DMA16_PAGE, (address >> 16) & 0xFE); /* 128K page number */
+ dsp_outb(DMA16_COUNT, count >> 1); /* Low byte of count */
+ dsp_outb(DMA16_COUNT, count >> 9); /* High byte of count */
+ dsp_outb(DMA16_MASK, SB_DMA_16 & 3); /* Enable DMA channel */
+ }
+}
+
+
+/*===========================================================================*
+ * dsp_setup()
+ *===========================================================================*/
+PRIVATE void dsp_setup()
+{
+ /* Set current sample speed */
+ dsp_set_speed(DspSpeed);
+
+ /* Put the speaker on */
+ if(DmaMode == DEV_WRITE) {
+ dsp_command (DSP_CMD_SPKON); /* put speaker on */
+
+ /* Program DSP with dma mode */
+ dsp_command((DspBits == 8 ? DSP_CMD_8BITAUTO_OUT : DSP_CMD_16BITAUTO_OUT));
+ } else {
+ dsp_command (DSP_CMD_SPKOFF); /* put speaker off */
+
+ /* Program DSP with dma mode */
+ dsp_command((DspBits == 8 ? DSP_CMD_8BITAUTO_IN : DSP_CMD_16BITAUTO_IN));
+ }
+
+ /* Program DSP with transfer mode */
+ if (!DspSign) {
+ dsp_command((DspStereo == 1 ? DSP_MODE_STEREO_US : DSP_MODE_MONO_US));
+ } else {
+ dsp_command((DspStereo == 1 ? DSP_MODE_STEREO_S : DSP_MODE_MONO_S));
+ }
+
+ /* Give length of fragment to DSP */
+ if (DspBits == 8) { /* 8 bit transfer */
+ /* #bytes - 1 */
+ dsp_command((DspFragmentSize - 1) >> 0);
+ dsp_command((DspFragmentSize - 1) >> 8);
+ } else { /* 16 bit transfer */
+ /* #words - 1 */
+ dsp_command((DspFragmentSize - 1) >> 1);
+ dsp_command((DspFragmentSize - 1) >> 9);
+ }
+}
+
+
+/*===========================================================================*
+ * mixer_set
+ *===========================================================================*/
+PUBLIC int mixer_set(reg, data)
+int reg;
+int data;
+{
+ int i;
+
+ dsp_outb(MIXER_REG, reg);
+ for(i = 0; i < 100; i++);
+ dsp_outb(MIXER_DATA, data);
+
+ return OK;
+}
\ No newline at end of file