From: Jorrit Herder Date: Thu, 11 Aug 2005 13:12:55 +0000 (+0000) Subject: Install script beautifications. X-Git-Tag: v3.1.0~372 X-Git-Url: http://zhaoyanbai.com/repos/%22http:/www.isc.org/icons/verify-sign/verify.pl?a=commitdiff_plain;h=897a03507742f512d8270fac8d626bf844d7ec21;p=minix.git Install script beautifications. Changed message of the day. Fixed some compile warnings in src/boot/. Changed header() variable. --- diff --git a/boot/boot.c b/boot/boot.c index 388054421..eabbd02fb 100755 --- a/boot/boot.c +++ b/boot/boot.c @@ -13,6 +13,7 @@ char version[]= "2.20"; #include #include #include +#include #include #include #include @@ -894,9 +895,8 @@ void get_parameters(void) /* Variables boot needs: */ b_setvar(E_SPECIAL|E_VAR, "image", "boot/image"); - b_setvar(E_SPECIAL|E_FUNCTION, "leader", - "echo MINIX boot monitor \\v\\n" - "\\nPress ESC to enter the monitor"); + b_setvar(E_SPECIAL|E_FUNCTION, "leader", + "echo --- Welcome to MINIX 3. This is the boot monitor. ---\\n"); b_setvar(E_SPECIAL|E_FUNCTION, "main", "menu"); b_setvar(E_SPECIAL|E_FUNCTION, "trailer", ""); diff --git a/boot/bootimage.c b/boot/bootimage.c index 361b55026..4dc217443 100755 --- a/boot/bootimage.c +++ b/boot/bootimage.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include diff --git a/commands/ibm/autopart.c b/commands/ibm/autopart.c index 5ddf09418..819135fb7 100755 --- a/commands/ibm/autopart.c +++ b/commands/ibm/autopart.c @@ -33,6 +33,9 @@ #include #include +/* Declare prototype. */ +static void printstep(int step, char *message); + /* True if a partition is an extended partition. */ #define ext_part(s) ((s) == 0x05 || (s) == 0x0F) @@ -2359,6 +2362,8 @@ select_region(void) region_t *reg; int nofree = 0; + printstep(2, "Select a disk region"); + if(nr_regions < 1) { printf("\nNo regions found - maybe the drive is too small.\n" "Please try expert mode.\n"); @@ -2372,7 +2377,6 @@ select_region(void) } do { - printstep(5, "Select a region"); printf("\nI've found the following region%s on this disk (%s).\n\n", SORNOT(nr_regions), prettysizeprint(table[0].size/2)); @@ -2410,11 +2414,9 @@ select_region(void) printf("That region number isn't available.\n"); continue; } - printstep(6, "Confirm your partition choice"); sure = is_sure(0, "\nPlease confirm you want to use disk region number %d?", rn); } else { - printstep(6, "Confirm your partition choice"); rn = 0; sure = is_sure(0, "\nUse this region?"); } @@ -2423,12 +2425,12 @@ select_region(void) return(®ions[rn]); } -void printstep(int step, char *str) +static void printstep(int step, char *str) { int n; - n = printf("\n --- Step %d: %s ", step, str); + n = printf("\n --- Substep 2.%d: %s ---", step, str); while(n++ < 70) printf("-"); - printf("\n\n"); + printf("\n"); } device_t * @@ -2438,6 +2440,7 @@ select_disk(void) int i, choice, drives; static char line[500]; + printstep(1, "Select a disk to install MINIX"); printf("\nProbing for disks. This may take a short while."); do { @@ -2445,7 +2448,6 @@ select_disk(void) curdev=firstdev; for(; i < MAX_DEVICES;) { - printf("."); m_read('r', NULL); if(device >= 0) { devices[i].dev = curdev; @@ -2472,20 +2474,13 @@ select_disk(void) printf("\nProbing done; %d drive%s found.\n", drives, SORNOT(drives)); - if(drives == 1) { - sure = 1; - choice = 0; - } else { - - printstep(3, "Choose a disk to install MINIX 3 on"); printf("\nI've found the following drive%s on your system.\n", SORNOT(drives)); for(i = 0; i < drives; i++) { - if(drives > 1) - printf("\n %2d. ", i); - else printf(" "); - printf(" (%s, ", devices[i].dev->name); + printf(" "); + printf("Disk %d", i); + printf(" ( %s, ", devices[i].dev->name); printf("%s)\n", prettysizeprint(devices[i].sectors/2)); printregions(devices[i].regions, 8, devices[i].nr_partitions, @@ -2493,6 +2488,7 @@ select_disk(void) devices[i].nr_regions, 0); } + if (drives > 1) { printf("\nPlease enter disk number you want to use: "); fflush(NULL); if(!fgets(line, sizeof(line)-2, stdin)) @@ -2502,10 +2498,12 @@ select_disk(void) printf("Number out of range.\n"); continue; } - printstep(4, "Confirm your choice"); + } + else { + choice = 0; + } sure = is_sure(0, "\nPlease confirm you want to use disk %d (%s)?", choice, devices[choice].dev->name); - } } while(!sure); return devices[choice].dev; } @@ -2562,6 +2560,7 @@ do_autopart(int resultfd) struct part_entry *pe; char sure[50]; struct part_entry orig_table[1 + NR_PARTITIONS]; + int region, disk; nordonly = 1; probing = 1; @@ -2600,11 +2599,14 @@ do_autopart(int resultfd) m_dump(table); #endif - printstep(7, "Point of no return"); + printstep(3, "Confirm your choices"); + + region = (int)(r-regions); + disk = (int) (curdev-firstdev); - printf("\nThis is the point of no return. You have selected to install MINIX\n"); - printf("into region %d of disk %d. If you agree with this selection, your\n", (int)(r-regions), (int) (curdev-firstdev)); - printf("disk will be written to prepare for the rest of the installation.\n\n"); + printf("\nThis is the point of no return. You have selected to install MINIX\n"); + printf("into region %d of disk %d (%sp%d). Please confirm that you want\n", region, disk, devices[disk].dev->name, region); + printf("to use this selection to install MINIX.\n\n"); if(!is_sure(SURE_SERIOUS, "Are you sure you want to continue?")) return 1; diff --git a/commands/scripts/setup.sh b/commands/scripts/setup.sh index fecba1ef1..4cffc0884 100755 --- a/commands/scripts/setup.sh +++ b/commands/scripts/setup.sh @@ -62,22 +62,21 @@ case $thisroot:$fdusr in *) fdroot=$thisroot # ? esac -echo -n "\ -This is the MINIX installation script. +echo -n " +Welcome to the MINIX installation script. Note 1: If the screen blanks, hit CTRL+F3 to select \"software scrolling\". Note 2: If things go wrong then hit DEL and start over. -Note 3: Some questions have default answers, like this: [y] - Simply hit ENTER if you want to choose that answer. +Note 3: Default answers, like [y], can simply be chosen by hitting ENTER. Note 4: If you see a colon (:) then you should hit ENTER to continue. :" read ret -echo " --- Step 1: Select keyboard type ---------------------------------" - -echo " -What type of keyboard do you have? You can choose one of: -" +echo "" +echo " --- Step 1: Select keyboard type --------------------------------------" +echo "" +echo "What type of keyboard do you have? You can choose one of:" +echo "" ls -C /usr/lib/keymaps | sed -e 's/\.map//g' -e 's/^/ /' echo -n " Keyboard type? [us-std] "; read keymap @@ -86,10 +85,14 @@ test -n "$keymap" && loadkeys "/usr/lib/keymaps/$keymap.map" ok="" while [ "$ok" = "" ] do -echo " - --- Step 2: Select your expertise level --------------------------- -" - echo "Now you need to create a MINIX 3 partition on the hard disk." +echo "" +echo " --- Step 2: Create a partition for MINIX 3 ----------------------------" +echo "" + + echo "Now you need to create a MINIX 3 partition on your hard disk." + echo "Unless you are an expert, you are advised to use the automated" + echo "step-by-step help in setting up." + echo "" echo -n "Do you want to use (A)utomatic or the e(X)pert mode? [A] " read ch case "$ch" in @@ -130,7 +133,17 @@ make. (See the devices section in usage(8) on MINIX device names.) Please finish the name of the primary partition you have created: (Just type ENTER if you want to rerun \"part\") /dev/" read primary - done +echo "" +echo "This is the point of no return. You have selected to install MINIX" +echo "on partition /dev/$primary. Please confirm that you want to use this" +echo "selection to install MINIX." +echo "" +while [ -z "$confirmation" -o "$confirmation" != yes ] + do + echo -n "Are you sure you want to continue? Please enter 'yes' or 'no':" + read confirmation + done +done else # Automatic mode while [ -z "$primary" ] @@ -177,41 +190,42 @@ hex2int() done echo $i } -echo " --- Step 8: Select your Ethernet chip ----------------------------" -# Ask user about networking echo "" +echo " --- Step 3: Select your Ethernet chip ---------------------------------" +echo "" + +# Ask user about networking echo "MINIX currently supports the following Ethernet cards. Please choose: " echo "" echo "0. No Ethernet card (no networking)" echo "1. Intel Pro/100" echo "2. Realtek 8139 based card" echo "3. Realtek 8029 based card (emulated by Qemu)" -echo "4. NE2000, 3com 503 or WD based card (NE2000 is emulated by Bochs)" -echo "5. NE2000, with default settings for Bochs emulation in $LOCALRC" -echo "6. A 3com 501 or 509" -echo "7. A different Ethernet card (no networking)" +echo "4. NE2000, 3com 503 or WD based card (emulated by Bochs)" +echo "5. 3Com 501 or 3Com 509 based card" +echo "6. Different Ethernet card (no networking)" echo "" -echo "With some cards, you'll have to edit $LOCALRC " -echo "after installing to the proper parameters." +echo "With some cards, you'll have to edit $LOCALRC after installing." echo "" echo "You can always change your mind after the install." echo "" -echo -n "Choice? " +echo -n "Choice? [0] " read eth driver="" driverargs="" -config_warn="Note: After installing, please edit $LOCALRC to the right configuration." +config_warn=" +Note: After installing, edit $LOCALRC to the right configuration. +If you chose option 4, the defaults for emulation by Bochs have been set." case "$eth" in 1) driver=fxp; ;; 2) driver=rtl8139; ;; 3) driver=dp8390; driverargs="dp8390_arg='DPETH0=pci'"; ;; - 4) driver=dp8390; driverargs="#dp8390_arg='DPETH0=port:irq:memory'"; - echo $config_warn; + 4) driver=dp8390; driverargs="dp8390_arg='DPETH0=240:9'"; + echo "$config_warn"; ;; - 5) driver=dp8390; driverargs="dp8390_arg='DPETH0=240:9'"; ;; - 6) driver=dpeth; driverargs="#dpeth_arg='DPETH0=port:irq:memory'"; - echo $config_warn; + 5) driver=dpeth; driverargs="#dpeth_arg='DPETH0=port:irq:memory'"; + echo "$config_warn"; ;; esac @@ -238,30 +252,35 @@ i86) esac blockdefault=4 -echo " --- Step 9: Select a disk block size -----------------------------" -echo "The default block size on the disk is $blockdefault KB. -If you have a small disk or small RAM you may want 1 KB blocks. -Please type 1 then, or leave it at the default. -" +echo "" +echo " --- Step 4: Select a block size ---------------------------------------" +echo "" + +echo "The maximum (and default) file system block size is $blockdefault KB." +echo "For a small disk or small RAM you may want 1 or 2 KB blocks." +echo "" while [ -z "$blocksize" ] -do echo -n "Block size in kilobytes [$blockdefault]? " +do echo -n "Block size in kilobytes? [$blockdefault] " read blocksize if [ -z "$blocksize" ] then blocksize=$blockdefault fi if [ "$blocksize" -ne 1 -a "$blocksize" -ne 2 -a "$blocksize" -ne $blockdefault ] - then echo "$blocksize bogus block size. 1, 2 or $blockdefault please." + then echo "$blocksize KB is a bogus block size; 1, 2 or $blockdefault KB please." blocksize="" fi done blocksizebytes="`expr $blocksize '*' 1024`" -echo " --- Step 10: Allocate swap space ----------------------------------" + +echo "" +echo " --- Step 5: Allocate swap space ---------------------------------------" +echo "" echo -n "How much swap space would you like? Swapspace is only needed if this -system is memory starved. If you have 128 MB of memory or more, you +system is memory starved. If you have 128 MB of memory or more, you probably don't need it. If you have less and want to run many programs at once, I suggest setting it to the memory size. @@ -271,28 +290,22 @@ swapsize= read swapsize test -z "$swapsize" && swapsize=$swapadv -echo " - --- Step 11: Check all your choices ---------------------------------- -" -echo -n "You have created a partition named: /dev/$primary +echo " +You have selected to install MINIX in the partition /dev/$primary. The following subpartitions are about to be created on /dev/$primary: - Root subpartition: /dev/$root 2 MB - Swap subpartition: /dev/$swap $swapsize kb + Root subpartition: /dev/$root 16 MB + Swap subpartition: /dev/$swap $swapsize KB /usr subpartition: /dev/$usr rest of $primary - -Hit ENTER if everything looks fine, or hit DEL to bail out if you want to -think it over. The next step will overwrite /dev/$primary. -:" -read ret +" # Secondary master bootstrap. installboot -m /dev/$primary /usr/mdec/masterboot >/dev/null || exit # Partition the primary. p3=0:0 test "$swapsize" -gt 0 && p3=81:`expr $swapsize \* 2` -partition /dev/$primary 1 81:4096* $p3 81:0+ || exit +partition /dev/$primary 1 81:32768* $p3 81:0+ > /dev/null || exit if [ "$swapsize" -gt 0 ] then @@ -304,17 +317,21 @@ else swap= fi -echo " --- Step 12: Wait for bad block detection ----------------------------" +echo "" +echo " --- Step 6: Wait for bad block detection ------------------------------" +echo "" mkfs -B $blocksizebytes /dev/$usr -echo "\ -Scanning /dev/$usr for bad blocks. (Hit DEL to stop the scan if you are -absolutely sure that there can not be any bad blocks. Otherwise just wait.)" +echo "Scanning /dev/$usr for bad blocks. (Hit DEL to stop the scan if you are" +echo "absolutely sure that there can not be any bad blocks. Otherwise just wait.)" +echo "" trap ': nothing' 2 readall -b /dev/$usr | sh trap 2 -echo " --- Step 13: Wait for files to be copied ------------------------------" +echo "" +echo " --- Step 7: Wait for files to be copied -------------------------------" +echo "" mount /dev/$usr /mnt || exit # Mount the intended /usr. @@ -395,14 +412,14 @@ i86) test $cache -lt 64 && cache=0 test $cache -gt 1024 && cache=1024 esac -echo "Second level file system block cache set to $cache kb." +# echo "Second level file system block cache set to $cache KB." if [ $cache -eq 0 ]; then cache=; else cache="ramsize=$cache"; fi - # Make bootable. +# Make bootable. installboot -d /dev/$root /usr/mdec/bootblock /boot/boot >/dev/null || exit -edparams /dev/$root "rootdev=$root; ramimagedev=$root; $disable $cache; main() { echo This is the MINIX 3 boot monitor.; echo MINIX will load in 5 seconds, or press ESC.; trap 5000 boot; menu; }; save" || exit +edparams /dev/$root "rootdev=$root; ramimagedev=$root; $disable $cache; main() { echo By default, MINIX 3 will automatically load in 3 seconds.; echo Press ESC to enter the monitor for special configuration.; trap 3000 boot; menu; }; save" || exit pfile="/usr/src/tools/fdbootparams" -echo "Remembering boot parameters in ${pfile}." +# echo "Remembering boot parameters in ${pfile}." echo "rootdev=$root; ramimagedev=$root; $cache; save" >$pfile || exit sync @@ -410,6 +427,7 @@ echo " Please type 'shutdown' to exit MINIX 3 and enter the boot monitor. At the boot monitor prompt, you can type 'boot $primary' to try the newly installed MINIX system. + See Part IV: Testing in the usage manual. "