From 44bedb31d842b4b0444105519bcf929a69fe2dc1 Mon Sep 17 00:00:00 2001 From: Lionel Sambuc Date: Tue, 18 Dec 2012 20:25:56 +0100 Subject: [PATCH] Importing common/dist/zlib Change-Id: I46de716a98ccc501ca32b2a9445d9964594ddc61 --- common/dist/zlib/ChangeLog | 855 ++++++++ common/dist/zlib/FAQ | 339 ++++ common/dist/zlib/INDEX | 51 + common/dist/zlib/Makefile | 154 ++ common/dist/zlib/Makefile.in | 154 ++ common/dist/zlib/README | 125 ++ common/dist/zlib/adler32.c | 151 ++ common/dist/zlib/algorithm.txt | 209 ++ common/dist/zlib/amiga/Makefile.pup | 66 + common/dist/zlib/amiga/Makefile.sas | 65 + common/dist/zlib/as400/bndsrc | 132 ++ common/dist/zlib/as400/compile.clp | 123 ++ common/dist/zlib/as400/readme.txt | 111 ++ common/dist/zlib/as400/zlib.inc | 331 ++++ common/dist/zlib/compress.c | 81 + common/dist/zlib/configure | 459 +++++ common/dist/zlib/contrib/README.contrib | 71 + common/dist/zlib/contrib/ada/buffer_demo.adb | 106 + common/dist/zlib/contrib/ada/mtest.adb | 156 ++ common/dist/zlib/contrib/ada/read.adb | 156 ++ common/dist/zlib/contrib/ada/readme.txt | 65 + common/dist/zlib/contrib/ada/test.adb | 463 +++++ common/dist/zlib/contrib/ada/zlib-streams.adb | 225 +++ common/dist/zlib/contrib/ada/zlib-streams.ads | 114 ++ common/dist/zlib/contrib/ada/zlib-thin.adb | 141 ++ common/dist/zlib/contrib/ada/zlib-thin.ads | 450 +++++ common/dist/zlib/contrib/ada/zlib.adb | 701 +++++++ common/dist/zlib/contrib/ada/zlib.ads | 328 ++++ common/dist/zlib/contrib/ada/zlib.gpr | 20 + common/dist/zlib/contrib/asm586/README.586 | 43 + common/dist/zlib/contrib/asm586/match.S | 364 ++++ common/dist/zlib/contrib/asm686/README.686 | 34 + common/dist/zlib/contrib/asm686/match.S | 329 ++++ common/dist/zlib/contrib/blast/Makefile | 8 + common/dist/zlib/contrib/blast/README | 4 + common/dist/zlib/contrib/blast/blast.c | 446 +++++ common/dist/zlib/contrib/blast/blast.h | 73 + common/dist/zlib/contrib/blast/test.pk | Bin 0 -> 8 bytes common/dist/zlib/contrib/blast/test.txt | 1 + common/dist/zlib/contrib/delphi/ZLib.pas | 557 ++++++ common/dist/zlib/contrib/delphi/ZLibConst.pas | 11 + common/dist/zlib/contrib/delphi/readme.txt | 76 + common/dist/zlib/contrib/delphi/zlibd32.mak | 93 + .../dist/zlib/contrib/dotzlib/DotZLib.build | 33 + common/dist/zlib/contrib/dotzlib/DotZLib.chm | Bin 0 -> 72728 bytes common/dist/zlib/contrib/dotzlib/DotZLib.sln | 21 + .../contrib/dotzlib/DotZLib/AssemblyInfo.cs | 58 + .../contrib/dotzlib/DotZLib/ChecksumImpl.cs | 202 ++ .../contrib/dotzlib/DotZLib/CircularBuffer.cs | 83 + .../zlib/contrib/dotzlib/DotZLib/CodecBase.cs | 198 ++ .../zlib/contrib/dotzlib/DotZLib/Deflater.cs | 106 + .../zlib/contrib/dotzlib/DotZLib/DotZLib.cs | 288 +++ .../contrib/dotzlib/DotZLib/DotZLib.csproj | 141 ++ .../contrib/dotzlib/DotZLib/GZipStream.cs | 301 +++ .../zlib/contrib/dotzlib/DotZLib/Inflater.cs | 105 + .../zlib/contrib/dotzlib/DotZLib/UnitTests.cs | 274 +++ .../dist/zlib/contrib/dotzlib/LICENSE_1_0.txt | 23 + common/dist/zlib/contrib/dotzlib/readme.txt | 58 + common/dist/zlib/contrib/infback9/README | 1 + common/dist/zlib/contrib/infback9/infback9.c | 610 ++++++ common/dist/zlib/contrib/infback9/infback9.h | 39 + common/dist/zlib/contrib/infback9/inffix9.h | 109 ++ common/dist/zlib/contrib/infback9/inflate9.h | 49 + common/dist/zlib/contrib/infback9/inftree9.c | 325 +++ common/dist/zlib/contrib/infback9/inftree9.h | 57 + common/dist/zlib/contrib/inflate86/inffas86.c | 1159 +++++++++++ common/dist/zlib/contrib/inflate86/inffast.S | 1368 +++++++++++++ common/dist/zlib/contrib/iostream/test.cpp | 24 + .../dist/zlib/contrib/iostream/zfstream.cpp | 329 ++++ common/dist/zlib/contrib/iostream/zfstream.h | 130 ++ common/dist/zlib/contrib/iostream2/zstream.h | 309 +++ .../zlib/contrib/iostream2/zstream_test.cpp | 25 + common/dist/zlib/contrib/iostream3/README | 35 + common/dist/zlib/contrib/iostream3/TODO | 17 + common/dist/zlib/contrib/iostream3/test.cc | 50 + .../dist/zlib/contrib/iostream3/zfstream.cc | 479 +++++ common/dist/zlib/contrib/iostream3/zfstream.h | 468 +++++ common/dist/zlib/contrib/masm686/match.asm | 413 ++++ common/dist/zlib/contrib/masmx64/bld_ml64.bat | 2 + common/dist/zlib/contrib/masmx64/gvmat64.asm | 513 +++++ common/dist/zlib/contrib/masmx64/inffas8664.c | 188 ++ .../dist/zlib/contrib/masmx64/inffasx64.asm | 392 ++++ common/dist/zlib/contrib/masmx64/readme.txt | 28 + common/dist/zlib/contrib/masmx86/bld_ml32.bat | 2 + common/dist/zlib/contrib/masmx86/gvmat32.asm | 972 +++++++++ common/dist/zlib/contrib/masmx86/gvmat32c.c | 64 + common/dist/zlib/contrib/masmx86/inffas32.asm | 1083 ++++++++++ common/dist/zlib/contrib/masmx86/mkasm.bat | 3 + common/dist/zlib/contrib/masmx86/readme.txt | 21 + .../dist/zlib/contrib/minizip/ChangeLogUnzip | 67 + common/dist/zlib/contrib/minizip/Makefile | 25 + common/dist/zlib/contrib/minizip/crypt.h | 134 ++ common/dist/zlib/contrib/minizip/ioapi.c | 179 ++ common/dist/zlib/contrib/minizip/ioapi.h | 77 + common/dist/zlib/contrib/minizip/iowin32.c | 272 +++ common/dist/zlib/contrib/minizip/iowin32.h | 23 + common/dist/zlib/contrib/minizip/miniunz.c | 587 ++++++ common/dist/zlib/contrib/minizip/minizip.c | 422 ++++ common/dist/zlib/contrib/minizip/mztools.c | 283 +++ common/dist/zlib/contrib/minizip/mztools.h | 33 + common/dist/zlib/contrib/minizip/unzip.c | 1600 +++++++++++++++ common/dist/zlib/contrib/minizip/unzip.h | 356 ++++ common/dist/zlib/contrib/minizip/zip.c | 1221 ++++++++++++ common/dist/zlib/contrib/minizip/zip.h | 237 +++ common/dist/zlib/contrib/pascal/example.pas | 599 ++++++ common/dist/zlib/contrib/pascal/readme.txt | 76 + common/dist/zlib/contrib/pascal/zlibd32.mak | 93 + common/dist/zlib/contrib/pascal/zlibpas.pas | 236 +++ common/dist/zlib/contrib/puff/Makefile | 8 + common/dist/zlib/contrib/puff/README | 63 + common/dist/zlib/contrib/puff/puff.c | 839 ++++++++ common/dist/zlib/contrib/puff/puff.h | 33 + common/dist/zlib/contrib/puff/zeros.raw | Bin 0 -> 1213 bytes common/dist/zlib/contrib/testzlib/testzlib.c | 277 +++ .../dist/zlib/contrib/testzlib/testzlib.txt | 10 + common/dist/zlib/contrib/untgz/Makefile | 14 + common/dist/zlib/contrib/untgz/Makefile.msc | 17 + common/dist/zlib/contrib/untgz/untgz.c | 676 +++++++ common/dist/zlib/contrib/vstudio/readme.txt | 73 + .../zlib/contrib/vstudio/vc7/miniunz.vcproj | 126 ++ .../zlib/contrib/vstudio/vc7/minizip.vcproj | 126 ++ .../zlib/contrib/vstudio/vc7/testzlib.vcproj | 126 ++ common/dist/zlib/contrib/vstudio/vc7/zlib.rc | 32 + .../zlib/contrib/vstudio/vc7/zlibstat.vcproj | 246 +++ .../dist/zlib/contrib/vstudio/vc7/zlibvc.def | 92 + .../dist/zlib/contrib/vstudio/vc7/zlibvc.sln | 78 + .../zlib/contrib/vstudio/vc7/zlibvc.vcproj | 445 +++++ .../zlib/contrib/vstudio/vc8/miniunz.vcproj | 566 ++++++ .../zlib/contrib/vstudio/vc8/minizip.vcproj | 563 ++++++ .../zlib/contrib/vstudio/vc8/testzlib.vcproj | 948 +++++++++ .../contrib/vstudio/vc8/testzlibdll.vcproj | 567 ++++++ common/dist/zlib/contrib/vstudio/vc8/zlib.rc | 32 + .../zlib/contrib/vstudio/vc8/zlibstat.vcproj | 870 +++++++++ .../dist/zlib/contrib/vstudio/vc8/zlibvc.def | 92 + .../dist/zlib/contrib/vstudio/vc8/zlibvc.sln | 144 ++ .../zlib/contrib/vstudio/vc8/zlibvc.vcproj | 1219 ++++++++++++ common/dist/zlib/crc32.c | 435 +++++ common/dist/zlib/crc32.h | 443 +++++ common/dist/zlib/deflate.c | 1738 +++++++++++++++++ common/dist/zlib/deflate.h | 333 ++++ common/dist/zlib/example.c | 567 ++++++ common/dist/zlib/examples/README.examples | 42 + common/dist/zlib/examples/fitblk.c | 235 +++ common/dist/zlib/examples/gun.c | 695 +++++++ common/dist/zlib/examples/gzappend.c | 502 +++++ common/dist/zlib/examples/gzjoin.c | 450 +++++ common/dist/zlib/examples/gzlog.c | 415 ++++ common/dist/zlib/examples/gzlog.h | 60 + common/dist/zlib/examples/zlib_how.html | 523 +++++ common/dist/zlib/examples/zpipe.c | 193 ++ common/dist/zlib/examples/zran.c | 406 ++++ common/dist/zlib/gzio.c | 1035 ++++++++++ common/dist/zlib/infback.c | 625 ++++++ common/dist/zlib/inffast.c | 320 +++ common/dist/zlib/inffast.h | 13 + common/dist/zlib/inffixed.h | 96 + common/dist/zlib/inflate.c | 1378 +++++++++++++ common/dist/zlib/inflate.h | 117 ++ common/dist/zlib/inftrees.c | 331 ++++ common/dist/zlib/inftrees.h | 57 + common/dist/zlib/make_vms.com | 461 +++++ common/dist/zlib/minigzip.c | 324 +++ common/dist/zlib/msdos/Makefile.bor | 109 ++ common/dist/zlib/msdos/Makefile.dj2 | 104 + common/dist/zlib/msdos/Makefile.emx | 69 + common/dist/zlib/msdos/Makefile.msc | 106 + common/dist/zlib/msdos/Makefile.tc | 94 + common/dist/zlib/old/Makefile.riscos | 151 ++ common/dist/zlib/old/README | 3 + common/dist/zlib/old/descrip.mms | 48 + common/dist/zlib/old/os2/Makefile.os2 | 136 ++ common/dist/zlib/old/os2/zlib.def | 51 + common/dist/zlib/old/visual-basic.txt | 160 ++ common/dist/zlib/old/zlib.html | 971 +++++++++ common/dist/zlib/projects/README.projects | 41 + common/dist/zlib/projects/visualc6/README.txt | 73 + .../dist/zlib/projects/visualc6/example.dsp | 278 +++ .../dist/zlib/projects/visualc6/minigzip.dsp | 278 +++ common/dist/zlib/projects/visualc6/zlib.dsp | 609 ++++++ common/dist/zlib/projects/visualc6/zlib.dsw | 59 + common/dist/zlib/qnx/package.qpg | 141 ++ common/dist/zlib/trees.c | 1222 ++++++++++++ common/dist/zlib/trees.h | 130 ++ common/dist/zlib/uncompr.c | 63 + common/dist/zlib/win32/DLL_FAQ.txt | 397 ++++ common/dist/zlib/win32/Makefile.bor | 107 + common/dist/zlib/win32/Makefile.emx | 69 + common/dist/zlib/win32/Makefile.gcc | 141 ++ common/dist/zlib/win32/Makefile.msc | 126 ++ common/dist/zlib/win32/VisualC.txt | 3 + common/dist/zlib/win32/zlib.def | 60 + common/dist/zlib/win32/zlib1.rc | 39 + common/dist/zlib/zconf.h | 340 ++++ common/dist/zlib/zconf.in.h | 334 ++++ common/dist/zlib/zlib.3 | 161 ++ common/dist/zlib/zlib.h | 1361 +++++++++++++ common/dist/zlib/zutil.c | 320 +++ common/dist/zlib/zutil.h | 278 +++ releasetools/nbsd_ports | 1 + 199 files changed, 54825 insertions(+) create mode 100644 common/dist/zlib/ChangeLog create mode 100644 common/dist/zlib/FAQ create mode 100644 common/dist/zlib/INDEX create mode 100644 common/dist/zlib/Makefile create mode 100644 common/dist/zlib/Makefile.in create mode 100644 common/dist/zlib/README create mode 100644 common/dist/zlib/adler32.c create mode 100644 common/dist/zlib/algorithm.txt create mode 100644 common/dist/zlib/amiga/Makefile.pup create mode 100644 common/dist/zlib/amiga/Makefile.sas create mode 100644 common/dist/zlib/as400/bndsrc create mode 100644 common/dist/zlib/as400/compile.clp create mode 100644 common/dist/zlib/as400/readme.txt create mode 100644 common/dist/zlib/as400/zlib.inc create mode 100644 common/dist/zlib/compress.c create mode 100644 common/dist/zlib/configure create mode 100644 common/dist/zlib/contrib/README.contrib create mode 100644 common/dist/zlib/contrib/ada/buffer_demo.adb create mode 100644 common/dist/zlib/contrib/ada/mtest.adb create mode 100644 common/dist/zlib/contrib/ada/read.adb create mode 100644 common/dist/zlib/contrib/ada/readme.txt create mode 100644 common/dist/zlib/contrib/ada/test.adb create mode 100644 common/dist/zlib/contrib/ada/zlib-streams.adb create mode 100644 common/dist/zlib/contrib/ada/zlib-streams.ads create mode 100644 common/dist/zlib/contrib/ada/zlib-thin.adb create mode 100644 common/dist/zlib/contrib/ada/zlib-thin.ads create mode 100644 common/dist/zlib/contrib/ada/zlib.adb create mode 100644 common/dist/zlib/contrib/ada/zlib.ads create mode 100644 common/dist/zlib/contrib/ada/zlib.gpr create mode 100644 common/dist/zlib/contrib/asm586/README.586 create mode 100644 common/dist/zlib/contrib/asm586/match.S create mode 100644 common/dist/zlib/contrib/asm686/README.686 create mode 100644 common/dist/zlib/contrib/asm686/match.S create mode 100644 common/dist/zlib/contrib/blast/Makefile create mode 100644 common/dist/zlib/contrib/blast/README create mode 100644 common/dist/zlib/contrib/blast/blast.c create mode 100644 common/dist/zlib/contrib/blast/blast.h create mode 100644 common/dist/zlib/contrib/blast/test.pk create mode 100644 common/dist/zlib/contrib/blast/test.txt create mode 100644 common/dist/zlib/contrib/delphi/ZLib.pas create mode 100644 common/dist/zlib/contrib/delphi/ZLibConst.pas create mode 100644 common/dist/zlib/contrib/delphi/readme.txt create mode 100644 common/dist/zlib/contrib/delphi/zlibd32.mak create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib.build create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib.chm create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib.sln create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib/AssemblyInfo.cs create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib/CircularBuffer.cs create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib/CodecBase.cs create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib/Deflater.cs create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib/DotZLib.cs create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib/DotZLib.csproj create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib/GZipStream.cs create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib/Inflater.cs create mode 100644 common/dist/zlib/contrib/dotzlib/DotZLib/UnitTests.cs create mode 100644 common/dist/zlib/contrib/dotzlib/LICENSE_1_0.txt create mode 100644 common/dist/zlib/contrib/dotzlib/readme.txt create mode 100644 common/dist/zlib/contrib/infback9/README create mode 100644 common/dist/zlib/contrib/infback9/infback9.c create mode 100644 common/dist/zlib/contrib/infback9/infback9.h create mode 100644 common/dist/zlib/contrib/infback9/inffix9.h create mode 100644 common/dist/zlib/contrib/infback9/inflate9.h create mode 100644 common/dist/zlib/contrib/infback9/inftree9.c create mode 100644 common/dist/zlib/contrib/infback9/inftree9.h create mode 100644 common/dist/zlib/contrib/inflate86/inffas86.c create mode 100644 common/dist/zlib/contrib/inflate86/inffast.S create mode 100644 common/dist/zlib/contrib/iostream/test.cpp create mode 100644 common/dist/zlib/contrib/iostream/zfstream.cpp create mode 100644 common/dist/zlib/contrib/iostream/zfstream.h create mode 100644 common/dist/zlib/contrib/iostream2/zstream.h create mode 100644 common/dist/zlib/contrib/iostream2/zstream_test.cpp create mode 100644 common/dist/zlib/contrib/iostream3/README create mode 100644 common/dist/zlib/contrib/iostream3/TODO create mode 100644 common/dist/zlib/contrib/iostream3/test.cc create mode 100644 common/dist/zlib/contrib/iostream3/zfstream.cc create mode 100644 common/dist/zlib/contrib/iostream3/zfstream.h create mode 100644 common/dist/zlib/contrib/masm686/match.asm create mode 100644 common/dist/zlib/contrib/masmx64/bld_ml64.bat create mode 100644 common/dist/zlib/contrib/masmx64/gvmat64.asm create mode 100644 common/dist/zlib/contrib/masmx64/inffas8664.c create mode 100644 common/dist/zlib/contrib/masmx64/inffasx64.asm create mode 100644 common/dist/zlib/contrib/masmx64/readme.txt create mode 100644 common/dist/zlib/contrib/masmx86/bld_ml32.bat create mode 100644 common/dist/zlib/contrib/masmx86/gvmat32.asm create mode 100644 common/dist/zlib/contrib/masmx86/gvmat32c.c create mode 100644 common/dist/zlib/contrib/masmx86/inffas32.asm create mode 100644 common/dist/zlib/contrib/masmx86/mkasm.bat create mode 100644 common/dist/zlib/contrib/masmx86/readme.txt create mode 100644 common/dist/zlib/contrib/minizip/ChangeLogUnzip create mode 100644 common/dist/zlib/contrib/minizip/Makefile create mode 100644 common/dist/zlib/contrib/minizip/crypt.h create mode 100644 common/dist/zlib/contrib/minizip/ioapi.c create mode 100644 common/dist/zlib/contrib/minizip/ioapi.h create mode 100644 common/dist/zlib/contrib/minizip/iowin32.c create mode 100644 common/dist/zlib/contrib/minizip/iowin32.h create mode 100644 common/dist/zlib/contrib/minizip/miniunz.c create mode 100644 common/dist/zlib/contrib/minizip/minizip.c create mode 100644 common/dist/zlib/contrib/minizip/mztools.c create mode 100644 common/dist/zlib/contrib/minizip/mztools.h create mode 100644 common/dist/zlib/contrib/minizip/unzip.c create mode 100644 common/dist/zlib/contrib/minizip/unzip.h create mode 100644 common/dist/zlib/contrib/minizip/zip.c create mode 100644 common/dist/zlib/contrib/minizip/zip.h create mode 100644 common/dist/zlib/contrib/pascal/example.pas create mode 100644 common/dist/zlib/contrib/pascal/readme.txt create mode 100644 common/dist/zlib/contrib/pascal/zlibd32.mak create mode 100644 common/dist/zlib/contrib/pascal/zlibpas.pas create mode 100644 common/dist/zlib/contrib/puff/Makefile create mode 100644 common/dist/zlib/contrib/puff/README create mode 100644 common/dist/zlib/contrib/puff/puff.c create mode 100644 common/dist/zlib/contrib/puff/puff.h create mode 100644 common/dist/zlib/contrib/puff/zeros.raw create mode 100644 common/dist/zlib/contrib/testzlib/testzlib.c create mode 100644 common/dist/zlib/contrib/testzlib/testzlib.txt create mode 100644 common/dist/zlib/contrib/untgz/Makefile create mode 100644 common/dist/zlib/contrib/untgz/Makefile.msc create mode 100644 common/dist/zlib/contrib/untgz/untgz.c create mode 100644 common/dist/zlib/contrib/vstudio/readme.txt create mode 100644 common/dist/zlib/contrib/vstudio/vc7/miniunz.vcproj create mode 100644 common/dist/zlib/contrib/vstudio/vc7/minizip.vcproj create mode 100644 common/dist/zlib/contrib/vstudio/vc7/testzlib.vcproj create mode 100644 common/dist/zlib/contrib/vstudio/vc7/zlib.rc create mode 100644 common/dist/zlib/contrib/vstudio/vc7/zlibstat.vcproj create mode 100644 common/dist/zlib/contrib/vstudio/vc7/zlibvc.def create mode 100644 common/dist/zlib/contrib/vstudio/vc7/zlibvc.sln create mode 100644 common/dist/zlib/contrib/vstudio/vc7/zlibvc.vcproj create mode 100644 common/dist/zlib/contrib/vstudio/vc8/miniunz.vcproj create mode 100644 common/dist/zlib/contrib/vstudio/vc8/minizip.vcproj create mode 100644 common/dist/zlib/contrib/vstudio/vc8/testzlib.vcproj create mode 100644 common/dist/zlib/contrib/vstudio/vc8/testzlibdll.vcproj create mode 100644 common/dist/zlib/contrib/vstudio/vc8/zlib.rc create mode 100644 common/dist/zlib/contrib/vstudio/vc8/zlibstat.vcproj create mode 100644 common/dist/zlib/contrib/vstudio/vc8/zlibvc.def create mode 100644 common/dist/zlib/contrib/vstudio/vc8/zlibvc.sln create mode 100644 common/dist/zlib/contrib/vstudio/vc8/zlibvc.vcproj create mode 100644 common/dist/zlib/crc32.c create mode 100644 common/dist/zlib/crc32.h create mode 100644 common/dist/zlib/deflate.c create mode 100644 common/dist/zlib/deflate.h create mode 100644 common/dist/zlib/example.c create mode 100644 common/dist/zlib/examples/README.examples create mode 100644 common/dist/zlib/examples/fitblk.c create mode 100644 common/dist/zlib/examples/gun.c create mode 100644 common/dist/zlib/examples/gzappend.c create mode 100644 common/dist/zlib/examples/gzjoin.c create mode 100644 common/dist/zlib/examples/gzlog.c create mode 100644 common/dist/zlib/examples/gzlog.h create mode 100644 common/dist/zlib/examples/zlib_how.html create mode 100644 common/dist/zlib/examples/zpipe.c create mode 100644 common/dist/zlib/examples/zran.c create mode 100644 common/dist/zlib/gzio.c create mode 100644 common/dist/zlib/infback.c create mode 100644 common/dist/zlib/inffast.c create mode 100644 common/dist/zlib/inffast.h create mode 100644 common/dist/zlib/inffixed.h create mode 100644 common/dist/zlib/inflate.c create mode 100644 common/dist/zlib/inflate.h create mode 100644 common/dist/zlib/inftrees.c create mode 100644 common/dist/zlib/inftrees.h create mode 100644 common/dist/zlib/make_vms.com create mode 100644 common/dist/zlib/minigzip.c create mode 100644 common/dist/zlib/msdos/Makefile.bor create mode 100644 common/dist/zlib/msdos/Makefile.dj2 create mode 100644 common/dist/zlib/msdos/Makefile.emx create mode 100644 common/dist/zlib/msdos/Makefile.msc create mode 100644 common/dist/zlib/msdos/Makefile.tc create mode 100644 common/dist/zlib/old/Makefile.riscos create mode 100644 common/dist/zlib/old/README create mode 100644 common/dist/zlib/old/descrip.mms create mode 100644 common/dist/zlib/old/os2/Makefile.os2 create mode 100644 common/dist/zlib/old/os2/zlib.def create mode 100644 common/dist/zlib/old/visual-basic.txt create mode 100644 common/dist/zlib/old/zlib.html create mode 100644 common/dist/zlib/projects/README.projects create mode 100644 common/dist/zlib/projects/visualc6/README.txt create mode 100644 common/dist/zlib/projects/visualc6/example.dsp create mode 100644 common/dist/zlib/projects/visualc6/minigzip.dsp create mode 100644 common/dist/zlib/projects/visualc6/zlib.dsp create mode 100644 common/dist/zlib/projects/visualc6/zlib.dsw create mode 100644 common/dist/zlib/qnx/package.qpg create mode 100644 common/dist/zlib/trees.c create mode 100644 common/dist/zlib/trees.h create mode 100644 common/dist/zlib/uncompr.c create mode 100644 common/dist/zlib/win32/DLL_FAQ.txt create mode 100644 common/dist/zlib/win32/Makefile.bor create mode 100644 common/dist/zlib/win32/Makefile.emx create mode 100644 common/dist/zlib/win32/Makefile.gcc create mode 100644 common/dist/zlib/win32/Makefile.msc create mode 100644 common/dist/zlib/win32/VisualC.txt create mode 100644 common/dist/zlib/win32/zlib.def create mode 100644 common/dist/zlib/win32/zlib1.rc create mode 100644 common/dist/zlib/zconf.h create mode 100644 common/dist/zlib/zconf.in.h create mode 100644 common/dist/zlib/zlib.3 create mode 100644 common/dist/zlib/zlib.h create mode 100644 common/dist/zlib/zutil.c create mode 100644 common/dist/zlib/zutil.h diff --git a/common/dist/zlib/ChangeLog b/common/dist/zlib/ChangeLog new file mode 100644 index 000000000..2b7cf3a73 --- /dev/null +++ b/common/dist/zlib/ChangeLog @@ -0,0 +1,855 @@ + + ChangeLog file for zlib + +Changes in 1.2.3 (18 July 2005) +- Apply security vulnerability fixes to contrib/infback9 as well +- Clean up some text files (carriage returns, trailing space) +- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant] + +Changes in 1.2.2.4 (11 July 2005) +- Add inflatePrime() function for starting inflation at bit boundary +- Avoid some Visual C warnings in deflate.c +- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit + compile +- Fix some spelling errors in comments [Betts] +- Correct inflateInit2() error return documentation in zlib.h +- Added zran.c example of compressed data random access to examples + directory, shows use of inflatePrime() +- Fix cast for assignments to strm->state in inflate.c and infback.c +- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer] +- Move declarations of gf2 functions to right place in crc32.c [Oberhumer] +- Add cast in trees.c t avoid a warning [Oberhumer] +- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer] +- Update make_vms.com [Zinser] +- Initialize state->write in inflateReset() since copied in inflate_fast() +- Be more strict on incomplete code sets in inflate_table() and increase + ENOUGH and MAXD -- this repairs a possible security vulnerability for + invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for + discovering the vulnerability and providing test cases. +- Add ia64 support to configure for HP-UX [Smith] +- Add error return to gzread() for format or i/o error [Levin] +- Use malloc.h for OS/2 [Necasek] + +Changes in 1.2.2.3 (27 May 2005) +- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile +- Typecast fread() return values in gzio.c [Vollant] +- Remove trailing space in minigzip.c outmode (VC++ can't deal with it) +- Fix crc check bug in gzread() after gzungetc() [Heiner] +- Add the deflateTune() function to adjust internal compression parameters +- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack) +- Remove an incorrect assertion in examples/zpipe.c +- Add C++ wrapper in infback9.h [Donais] +- Fix bug in inflateCopy() when decoding fixed codes +- Note in zlib.h how much deflateSetDictionary() actually uses +- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used) +- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer] +- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer] +- Add gzdirect() function to indicate transparent reads +- Update contrib/minizip [Vollant] +- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer] +- Add casts in crc32.c to avoid warnings [Oberhumer] +- Add contrib/masmx64 [Vollant] +- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant] + +Changes in 1.2.2.2 (30 December 2004) +- Replace structure assignments in deflate.c and inflate.c with zmemcpy to + avoid implicit memcpy calls (portability for no-library compilation) +- Increase sprintf() buffer size in gzdopen() to allow for large numbers +- Add INFLATE_STRICT to check distances against zlib header +- Improve WinCE errno handling and comments [Chang] +- Remove comment about no gzip header processing in FAQ +- Add Z_FIXED strategy option to deflateInit2() to force fixed trees +- Add updated make_vms.com [Coghlan], update README +- Create a new "examples" directory, move gzappend.c there, add zpipe.c, + fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html. +- Add FAQ entry and comments in deflate.c on uninitialized memory access +- Add Solaris 9 make options in configure [Gilbert] +- Allow strerror() usage in gzio.c for STDC +- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer] +- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant] +- Use z_off_t for adler32_combine() and crc32_combine() lengths +- Make adler32() much faster for small len +- Use OS_CODE in deflate() default gzip header + +Changes in 1.2.2.1 (31 October 2004) +- Allow inflateSetDictionary() call for raw inflate +- Fix inflate header crc check bug for file names and comments +- Add deflateSetHeader() and gz_header structure for custom gzip headers +- Add inflateGetheader() to retrieve gzip headers +- Add crc32_combine() and adler32_combine() functions +- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list +- Use zstreamp consistently in zlib.h (inflate_back functions) +- Remove GUNZIP condition from definition of inflate_mode in inflate.h + and in contrib/inflate86/inffast.S [Truta, Anderson] +- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson] +- Update projects/README.projects and projects/visualc6 [Truta] +- Update win32/DLL_FAQ.txt [Truta] +- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta] +- Deprecate Z_ASCII; use Z_TEXT instead [Truta] +- Use a new algorithm for setting strm->data_type in trees.c [Truta] +- Do not define an exit() prototype in zutil.c unless DEBUG defined +- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta] +- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate() +- Fix Darwin build version identification [Peterson] + +Changes in 1.2.2 (3 October 2004) +- Update zlib.h comments on gzip in-memory processing +- Set adler to 1 in inflateReset() to support Java test suite [Walles] +- Add contrib/dotzlib [Ravn] +- Update win32/DLL_FAQ.txt [Truta] +- Update contrib/minizip [Vollant] +- Move contrib/visual-basic.txt to old/ [Truta] +- Fix assembler builds in projects/visualc6/ [Truta] + +Changes in 1.2.1.2 (9 September 2004) +- Update INDEX file +- Fix trees.c to update strm->data_type (no one ever noticed!) +- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown] +- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE) +- Add limited multitasking protection to DYNAMIC_CRC_TABLE +- Add NO_vsnprintf for VMS in zutil.h [Mozilla] +- Don't declare strerror() under VMS [Mozilla] +- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize +- Update contrib/ada [Anisimkov] +- Update contrib/minizip [Vollant] +- Fix configure to not hardcode directories for Darwin [Peterson] +- Fix gzio.c to not return error on empty files [Brown] +- Fix indentation; update version in contrib/delphi/ZLib.pas and + contrib/pascal/zlibpas.pas [Truta] +- Update mkasm.bat in contrib/masmx86 [Truta] +- Update contrib/untgz [Truta] +- Add projects/README.projects [Truta] +- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta] +- Update win32/DLL_FAQ.txt [Truta] +- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta] +- Remove an unnecessary assignment to curr in inftrees.c [Truta] +- Add OS/2 to exe builds in configure [Poltorak] +- Remove err dummy parameter in zlib.h [Kientzle] + +Changes in 1.2.1.1 (9 January 2004) +- Update email address in README +- Several FAQ updates +- Fix a big fat bug in inftrees.c that prevented decoding valid + dynamic blocks with only literals and no distance codes -- + Thanks to "Hot Emu" for the bug report and sample file +- Add a note to puff.c on no distance codes case. + +Changes in 1.2.1 (17 November 2003) +- Remove a tab in contrib/gzappend/gzappend.c +- Update some interfaces in contrib for new zlib functions +- Update zlib version number in some contrib entries +- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta] +- Support shared libraries on Hurd and KFreeBSD [Brown] +- Fix error in NO_DIVIDE option of adler32.c + +Changes in 1.2.0.8 (4 November 2003) +- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas +- Add experimental NO_DIVIDE #define in adler32.c + - Possibly faster on some processors (let me know if it is) +- Correct Z_BLOCK to not return on first inflate call if no wrap +- Fix strm->data_type on inflate() return to correctly indicate EOB +- Add deflatePrime() function for appending in the middle of a byte +- Add contrib/gzappend for an example of appending to a stream +- Update win32/DLL_FAQ.txt [Truta] +- Delete Turbo C comment in README [Truta] +- Improve some indentation in zconf.h [Truta] +- Fix infinite loop on bad input in configure script [Church] +- Fix gzeof() for concatenated gzip files [Johnson] +- Add example to contrib/visual-basic.txt [Michael B.] +- Add -p to mkdir's in Makefile.in [vda] +- Fix configure to properly detect presence or lack of printf functions +- Add AS400 support [Monnerat] +- Add a little Cygwin support [Wilson] + +Changes in 1.2.0.7 (21 September 2003) +- Correct some debug formats in contrib/infback9 +- Cast a type in a debug statement in trees.c +- Change search and replace delimiter in configure from % to # [Beebe] +- Update contrib/untgz to 0.2 with various fixes [Truta] +- Add build support for Amiga [Nikl] +- Remove some directories in old that have been updated to 1.2 +- Add dylib building for Mac OS X in configure and Makefile.in +- Remove old distribution stuff from Makefile +- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X +- Update links in README + +Changes in 1.2.0.6 (13 September 2003) +- Minor FAQ updates +- Update contrib/minizip to 1.00 [Vollant] +- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta] +- Update POSTINC comment for 68060 [Nikl] +- Add contrib/infback9 with deflate64 decoding (unsupported) +- For MVS define NO_vsnprintf and undefine FAR [van Burik] +- Add pragma for fdopen on MVS [van Burik] + +Changes in 1.2.0.5 (8 September 2003) +- Add OF to inflateBackEnd() declaration in zlib.h +- Remember start when using gzdopen in the middle of a file +- Use internal off_t counters in gz* functions to properly handle seeks +- Perform more rigorous check for distance-too-far in inffast.c +- Add Z_BLOCK flush option to return from inflate at block boundary +- Set strm->data_type on return from inflate + - Indicate bits unused, if at block boundary, and if in last block +- Replace size_t with ptrdiff_t in crc32.c, and check for correct size +- Add condition so old NO_DEFLATE define still works for compatibility +- FAQ update regarding the Windows DLL [Truta] +- INDEX update: add qnx entry, remove aix entry [Truta] +- Install zlib.3 into mandir [Wilson] +- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta] +- Adapt the zlib interface to the new DLL convention guidelines [Truta] +- Introduce ZLIB_WINAPI macro to allow the export of functions using + the WINAPI calling convention, for Visual Basic [Vollant, Truta] +- Update msdos and win32 scripts and makefiles [Truta] +- Export symbols by name, not by ordinal, in win32/zlib.def [Truta] +- Add contrib/ada [Anisimkov] +- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta] +- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant] +- Add contrib/masm686 [Truta] +- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm + [Truta, Vollant] +- Update contrib/delphi; rename to contrib/pascal; add example [Truta] +- Remove contrib/delphi2; add a new contrib/delphi [Truta] +- Avoid inclusion of the nonstandard in contrib/iostream, + and fix some method prototypes [Truta] +- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip + [Truta] +- Avoid the use of backslash (\) in contrib/minizip [Vollant] +- Fix file time handling in contrib/untgz; update makefiles [Truta] +- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines + [Vollant] +- Remove contrib/vstudio/vc15_16 [Vollant] +- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta] +- Update README.contrib [Truta] +- Invert the assignment order of match_head and s->prev[...] in + INSERT_STRING [Truta] +- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings + [Truta] +- Compare function pointers with 0, not with NULL or Z_NULL [Truta] +- Fix prototype of syncsearch in inflate.c [Truta] +- Introduce ASMINF macro to be enabled when using an ASM implementation + of inflate_fast [Truta] +- Change NO_DEFLATE to NO_GZCOMPRESS [Truta] +- Modify test_gzio in example.c to take a single file name as a + parameter [Truta] +- Exit the example.c program if gzopen fails [Truta] +- Add type casts around strlen in example.c [Truta] +- Remove casting to sizeof in minigzip.c; give a proper type + to the variable compared with SUFFIX_LEN [Truta] +- Update definitions of STDC and STDC99 in zconf.h [Truta] +- Synchronize zconf.h with the new Windows DLL interface [Truta] +- Use SYS16BIT instead of __32BIT__ to distinguish between + 16- and 32-bit platforms [Truta] +- Use far memory allocators in small 16-bit memory models for + Turbo C [Truta] +- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in + zlibCompileFlags [Truta] +- Cygwin has vsnprintf [Wilson] +- In Windows16, OS_CODE is 0, as in MSDOS [Truta] +- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson] + +Changes in 1.2.0.4 (10 August 2003) +- Minor FAQ updates +- Be more strict when checking inflateInit2's windowBits parameter +- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well +- Add gzip wrapper option to deflateInit2 using windowBits +- Add updated QNX rule in configure and qnx directory [Bonnefoy] +- Make inflate distance-too-far checks more rigorous +- Clean up FAR usage in inflate +- Add casting to sizeof() in gzio.c and minigzip.c + +Changes in 1.2.0.3 (19 July 2003) +- Fix silly error in gzungetc() implementation [Vollant] +- Update contrib/minizip and contrib/vstudio [Vollant] +- Fix printf format in example.c +- Correct cdecl support in zconf.in.h [Anisimkov] +- Minor FAQ updates + +Changes in 1.2.0.2 (13 July 2003) +- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons +- Attempt to avoid warnings in crc32.c for pointer-int conversion +- Add AIX to configure, remove aix directory [Bakker] +- Add some casts to minigzip.c +- Improve checking after insecure sprintf() or vsprintf() calls +- Remove #elif's from crc32.c +- Change leave label to inf_leave in inflate.c and infback.c to avoid + library conflicts +- Remove inflate gzip decoding by default--only enable gzip decoding by + special request for stricter backward compatibility +- Add zlibCompileFlags() function to return compilation information +- More typecasting in deflate.c to avoid warnings +- Remove leading underscore from _Capital #defines [Truta] +- Fix configure to link shared library when testing +- Add some Windows CE target adjustments [Mai] +- Remove #define ZLIB_DLL in zconf.h [Vollant] +- Add zlib.3 [Rodgers] +- Update RFC URL in deflate.c and algorithm.txt [Mai] +- Add zlib_dll_FAQ.txt to contrib [Truta] +- Add UL to some constants [Truta] +- Update minizip and vstudio [Vollant] +- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h +- Expand use of NO_DUMMY_DECL to avoid all dummy structures +- Added iostream3 to contrib [Schwardt] +- Replace rewind() with fseek() for WinCE [Truta] +- Improve setting of zlib format compression level flags + - Report 0 for huffman and rle strategies and for level == 0 or 1 + - Report 2 only for level == 6 +- Only deal with 64K limit when necessary at compile time [Truta] +- Allow TOO_FAR check to be turned off at compile time [Truta] +- Add gzclearerr() function [Souza] +- Add gzungetc() function + +Changes in 1.2.0.1 (17 March 2003) +- Add Z_RLE strategy for run-length encoding [Truta] + - When Z_RLE requested, restrict matches to distance one + - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE +- Correct FASTEST compilation to allow level == 0 +- Clean up what gets compiled for FASTEST +- Incorporate changes to zconf.in.h [Vollant] + - Refine detection of Turbo C need for dummy returns + - Refine ZLIB_DLL compilation + - Include additional header file on VMS for off_t typedef +- Try to use _vsnprintf where it supplants vsprintf [Vollant] +- Add some casts in inffast.c +- Enchance comments in zlib.h on what happens if gzprintf() tries to + write more than 4095 bytes before compression +- Remove unused state from inflateBackEnd() +- Remove exit(0) from minigzip.c, example.c +- Get rid of all those darn tabs +- Add "check" target to Makefile.in that does the same thing as "test" +- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in +- Update contrib/inflate86 [Anderson] +- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant] +- Add msdos and win32 directories with makefiles [Truta] +- More additions and improvements to the FAQ + +Changes in 1.2.0 (9 March 2003) +- New and improved inflate code + - About 20% faster + - Does not allocate 32K window unless and until needed + - Automatically detects and decompresses gzip streams + - Raw inflate no longer needs an extra dummy byte at end + - Added inflateBack functions using a callback interface--even faster + than inflate, useful for file utilities (gzip, zip) + - Added inflateCopy() function to record state for random access on + externally generated deflate streams (e.g. in gzip files) + - More readable code (I hope) +- New and improved crc32() + - About 50% faster, thanks to suggestions from Rodney Brown +- Add deflateBound() and compressBound() functions +- Fix memory leak in deflateInit2() +- Permit setting dictionary for raw deflate (for parallel deflate) +- Fix const declaration for gzwrite() +- Check for some malloc() failures in gzio.c +- Fix bug in gzopen() on single-byte file 0x1f +- Fix bug in gzread() on concatenated file with 0x1f at end of buffer + and next buffer doesn't start with 0x8b +- Fix uncompress() to return Z_DATA_ERROR on truncated input +- Free memory at end of example.c +- Remove MAX #define in trees.c (conflicted with some libraries) +- Fix static const's in deflate.c, gzio.c, and zutil.[ch] +- Declare malloc() and free() in gzio.c if STDC not defined +- Use malloc() instead of calloc() in zutil.c if int big enough +- Define STDC for AIX +- Add aix/ with approach for compiling shared library on AIX +- Add HP-UX support for shared libraries in configure +- Add OpenUNIX support for shared libraries in configure +- Use $cc instead of gcc to build shared library +- Make prefix directory if needed when installing +- Correct Macintosh avoidance of typedef Byte in zconf.h +- Correct Turbo C memory allocation when under Linux +- Use libz.a instead of -lz in Makefile (assure use of compiled library) +- Update configure to check for snprintf or vsnprintf functions and their + return value, warn during make if using an insecure function +- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that + is lost when library is used--resolution is to build new zconf.h +- Documentation improvements (in zlib.h): + - Document raw deflate and inflate + - Update RFCs URL + - Point out that zlib and gzip formats are different + - Note that Z_BUF_ERROR is not fatal + - Document string limit for gzprintf() and possible buffer overflow + - Note requirement on avail_out when flushing + - Note permitted values of flush parameter of inflate() +- Add some FAQs (and even answers) to the FAQ +- Add contrib/inflate86/ for x86 faster inflate +- Add contrib/blast/ for PKWare Data Compression Library decompression +- Add contrib/puff/ simple inflate for deflate format description + +Changes in 1.1.4 (11 March 2002) +- ZFREE was repeated on same allocation on some error conditions. + This creates a security problem described in + http://www.zlib.org/advisory-2002-03-11.txt +- Returned incorrect error (Z_MEM_ERROR) on some invalid data +- Avoid accesses before window for invalid distances with inflate window + less than 32K. +- force windowBits > 8 to avoid a bug in the encoder for a window size + of 256 bytes. (A complete fix will be available in 1.1.5). + +Changes in 1.1.3 (9 July 1998) +- fix "an inflate input buffer bug that shows up on rare but persistent + occasions" (Mark) +- fix gzread and gztell for concatenated .gz files (Didier Le Botlan) +- fix gzseek(..., SEEK_SET) in write mode +- fix crc check after a gzeek (Frank Faubert) +- fix miniunzip when the last entry in a zip file is itself a zip file + (J Lillge) +- add contrib/asm586 and contrib/asm686 (Brian Raiter) + See http://www.muppetlabs.com/~breadbox/software/assembly.html +- add support for Delphi 3 in contrib/delphi (Bob Dellaca) +- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti) +- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren) +- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks) +- added a FAQ file + +- Support gzdopen on Mac with Metrowerks (Jason Linhart) +- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart) +- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young) +- avoid some warnings with Borland C (Tom Tanner) +- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant) +- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant) +- allow several arguments to configure (Tim Mooney, Frodo Looijaard) +- use libdir and includedir in Makefile.in (Tim Mooney) +- support shared libraries on OSF1 V4 (Tim Mooney) +- remove so_locations in "make clean" (Tim Mooney) +- fix maketree.c compilation error (Glenn, Mark) +- Python interface to zlib now in Python 1.5 (Jeremy Hylton) +- new Makefile.riscos (Rich Walker) +- initialize static descriptors in trees.c for embedded targets (Nick Smith) +- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith) +- add the OS/2 files in Makefile.in too (Andrew Zabolotny) +- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane) +- fix maketree.c to allow clean compilation of inffixed.h (Mark) +- fix parameter check in deflateCopy (Gunther Nikl) +- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler) +- Many portability patches by Christian Spieler: + . zutil.c, zutil.h: added "const" for zmem* + . Make_vms.com: fixed some typos + . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists + . msdos/Makefile.msc: remove "default rtl link library" info from obj files + . msdos/Makefile.*: use model-dependent name for the built zlib library + . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc: + new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT) +- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane) +- replace __far with _far for better portability (Christian Spieler, Tom Lane) +- fix test for errno.h in configure (Tim Newsham) + +Changes in 1.1.2 (19 March 98) +- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant) + See http://www.winimage.com/zLibDll/unzip.html +- preinitialize the inflate tables for fixed codes, to make the code + completely thread safe (Mark) +- some simplifications and slight speed-up to the inflate code (Mark) +- fix gzeof on non-compressed files (Allan Schrum) +- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs) +- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn) +- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny) +- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori) +- do not wrap extern "C" around system includes (Tom Lane) +- mention zlib binding for TCL in README (Andreas Kupries) +- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert) +- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson) +- allow "configure --prefix $HOME" (Tim Mooney) +- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson) +- move Makefile.sas to amiga/Makefile.sas + +Changes in 1.1.1 (27 Feb 98) +- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson) +- remove block truncation heuristic which had very marginal effect for zlib + (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the + compression ratio on some files. This also allows inlining _tr_tally for + matches in deflate_slow. +- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier) + +Changes in 1.1.0 (24 Feb 98) +- do not return STREAM_END prematurely in inflate (John Bowler) +- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler) +- compile with -DFASTEST to get compression code optimized for speed only +- in minigzip, try mmap'ing the input file first (Miguel Albrecht) +- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain + on Sun but significant on HP) + +- add a pointer to experimental unzip library in README (Gilles Vollant) +- initialize variable gcc in configure (Chris Herborth) + +Changes in 1.0.9 (17 Feb 1998) +- added gzputs and gzgets functions +- do not clear eof flag in gzseek (Mark Diekhans) +- fix gzseek for files in transparent mode (Mark Diekhans) +- do not assume that vsprintf returns the number of bytes written (Jens Krinke) +- replace EXPORT with ZEXPORT to avoid conflict with other programs +- added compress2 in zconf.h, zlib.def, zlib.dnt +- new asm code from Gilles Vollant in contrib/asm386 +- simplify the inflate code (Mark): + . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new() + . ZALLOC the length list in inflate_trees_fixed() instead of using stack + . ZALLOC the value area for huft_build() instead of using stack + . Simplify Z_FINISH check in inflate() + +- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8 +- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi) +- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with + the declaration of FAR (Gilles VOllant) +- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann) +- read_buf buf parameter of type Bytef* instead of charf* +- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout) +- do not redeclare unlink in minigzip.c for WIN32 (John Bowler) +- fix check for presence of directories in "make install" (Ian Willis) + +Changes in 1.0.8 (27 Jan 1998) +- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant) +- fix gzgetc and gzputc for big endian systems (Markus Oberhumer) +- added compress2() to allow setting the compression level +- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong) +- use constant arrays for the static trees in trees.c instead of computing + them at run time (thanks to Ken Raeburn for this suggestion). To create + trees.h, compile with GEN_TREES_H and run "make test". +- check return code of example in "make test" and display result +- pass minigzip command line options to file_compress +- simplifying code of inflateSync to avoid gcc 2.8 bug + +- support CC="gcc -Wall" in configure -s (QingLong) +- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn) +- fix test for shared library support to avoid compiler warnings +- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant) +- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit) +- do not use fdopen for Metrowerks on Mac (Brad Pettit)) +- add checks for gzputc and gzputc in example.c +- avoid warnings in gzio.c and deflate.c (Andreas Kleinert) +- use const for the CRC table (Ken Raeburn) +- fixed "make uninstall" for shared libraries +- use Tracev instead of Trace in infblock.c +- in example.c use correct compressed length for test_sync +- suppress +vnocompatwarnings in configure for HPUX (not always supported) + +Changes in 1.0.7 (20 Jan 1998) +- fix gzseek which was broken in write mode +- return error for gzseek to negative absolute position +- fix configure for Linux (Chun-Chung Chen) +- increase stack space for MSC (Tim Wegner) +- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant) +- define EXPORTVA for gzprintf (Gilles Vollant) +- added man page zlib.3 (Rick Rodgers) +- for contrib/untgz, fix makedir() and improve Makefile + +- check gzseek in write mode in example.c +- allocate extra buffer for seeks only if gzseek is actually called +- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant) +- add inflateSyncPoint in zconf.h +- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def + +Changes in 1.0.6 (19 Jan 1998) +- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and + gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code) +- Fix a deflate bug occurring only with compression level 0 (thanks to + Andy Buckler for finding this one). +- In minigzip, pass transparently also the first byte for .Z files. +- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress() +- check Z_FINISH in inflate (thanks to Marc Schluper) +- Implement deflateCopy (thanks to Adam Costello) +- make static libraries by default in configure, add --shared option. +- move MSDOS or Windows specific files to directory msdos +- suppress the notion of partial flush to simplify the interface + (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4) +- suppress history buffer provided by application to simplify the interface + (this feature was not implemented anyway in 1.0.4) +- next_in and avail_in must be initialized before calling inflateInit or + inflateInit2 +- add EXPORT in all exported functions (for Windows DLL) +- added Makefile.nt (thanks to Stephen Williams) +- added the unsupported "contrib" directory: + contrib/asm386/ by Gilles Vollant + 386 asm code replacing longest_match(). + contrib/iostream/ by Kevin Ruland + A C++ I/O streams interface to the zlib gz* functions + contrib/iostream2/ by Tyge Løvset + Another C++ I/O streams interface + contrib/untgz/ by "Pedro A. Aranda Guti\irrez" + A very simple tar.gz file extractor using zlib + contrib/visual-basic.txt by Carlos Rios + How to use compress(), uncompress() and the gz* functions from VB. +- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression + level) in minigzip (thanks to Tom Lane) + +- use const for rommable constants in deflate +- added test for gzseek and gztell in example.c +- add undocumented function inflateSyncPoint() (hack for Paul Mackerras) +- add undocumented function zError to convert error code to string + (for Tim Smithers) +- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code. +- Use default memcpy for Symantec MSDOS compiler. +- Add EXPORT keyword for check_func (needed for Windows DLL) +- add current directory to LD_LIBRARY_PATH for "make test" +- create also a link for libz.so.1 +- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura) +- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX) +- added -soname for Linux in configure (Chun-Chung Chen, +- assign numbers to the exported functions in zlib.def (for Windows DLL) +- add advice in zlib.h for best usage of deflateSetDictionary +- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn) +- allow compilation with ANSI keywords only enabled for TurboC in large model +- avoid "versionString"[0] (Borland bug) +- add NEED_DUMMY_RETURN for Borland +- use variable z_verbose for tracing in debug mode (L. Peter Deutsch). +- allow compilation with CC +- defined STDC for OS/2 (David Charlap) +- limit external names to 8 chars for MVS (Thomas Lund) +- in minigzip.c, use static buffers only for 16-bit systems +- fix suffix check for "minigzip -d foo.gz" +- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee) +- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau) +- added makelcc.bat for lcc-win32 (Tom St Denis) +- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe) +- Avoid expanded Id. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion. +- check for unistd.h in configure (for off_t) +- remove useless check parameter in inflate_blocks_free +- avoid useless assignment of s->check to itself in inflate_blocks_new +- do not flush twice in gzclose (thanks to Ken Raeburn) +- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h +- use NO_ERRNO_H instead of enumeration of operating systems with errno.h +- work around buggy fclose on pipes for HP/UX +- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson) +- fix configure if CC is already equal to gcc + +Changes in 1.0.5 (3 Jan 98) +- Fix inflate to terminate gracefully when fed corrupted or invalid data +- Use const for rommable constants in inflate +- Eliminate memory leaks on error conditions in inflate +- Removed some vestigial code in inflate +- Update web address in README + +Changes in 1.0.4 (24 Jul 96) +- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF + bit, so the decompressor could decompress all the correct data but went + on to attempt decompressing extra garbage data. This affected minigzip too. +- zlibVersion and gzerror return const char* (needed for DLL) +- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno) +- use z_error only for DEBUG (avoid problem with DLLs) + +Changes in 1.0.3 (2 Jul 96) +- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS + small and medium models; this makes the library incompatible with previous + versions for these models. (No effect in large model or on other systems.) +- return OK instead of BUF_ERROR if previous deflate call returned with + avail_out as zero but there is nothing to do +- added memcmp for non STDC compilers +- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly) +- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO) +- better check for 16-bit mode MSC (avoids problem with Symantec) + +Changes in 1.0.2 (23 May 96) +- added Windows DLL support +- added a function zlibVersion (for the DLL support) +- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model) +- Bytef is define's instead of typedef'd only for Borland C +- avoid reading uninitialized memory in example.c +- mention in README that the zlib format is now RFC1950 +- updated Makefile.dj2 +- added algorithm.doc + +Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion] +- fix array overlay in deflate.c which sometimes caused bad compressed data +- fix inflate bug with empty stored block +- fix MSDOS medium model which was broken in 0.99 +- fix deflateParams() which could generated bad compressed data. +- Bytef is define'd instead of typedef'ed (work around Borland bug) +- added an INDEX file +- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32), + Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas) +- speed up adler32 for modern machines without auto-increment +- added -ansi for IRIX in configure +- static_init_done in trees.c is an int +- define unlink as delete for VMS +- fix configure for QNX +- add configure branch for SCO and HPUX +- avoid many warnings (unused variables, dead assignments, etc...) +- no fdopen for BeOS +- fix the Watcom fix for 32 bit mode (define FAR as empty) +- removed redefinition of Byte for MKWERKS +- work around an MWKERKS bug (incorrect merge of all .h files) + +Changes in 0.99 (27 Jan 96) +- allow preset dictionary shared between compressor and decompressor +- allow compression level 0 (no compression) +- add deflateParams in zlib.h: allow dynamic change of compression level + and compression strategy. +- test large buffers and deflateParams in example.c +- add optional "configure" to build zlib as a shared library +- suppress Makefile.qnx, use configure instead +- fixed deflate for 64-bit systems (detected on Cray) +- fixed inflate_blocks for 64-bit systems (detected on Alpha) +- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2) +- always return Z_BUF_ERROR when deflate() has nothing to do +- deflateInit and inflateInit are now macros to allow version checking +- prefix all global functions and types with z_ with -DZ_PREFIX +- make falloc completely reentrant (inftrees.c) +- fixed very unlikely race condition in ct_static_init +- free in reverse order of allocation to help memory manager +- use zlib-1.0/* instead of zlib/* inside the tar.gz +- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith + -Wconversion -Wstrict-prototypes -Wmissing-prototypes" +- allow gzread on concatenated .gz files +- deflateEnd now returns Z_DATA_ERROR if it was premature +- deflate is finally (?) fully deterministic (no matches beyond end of input) +- Document Z_SYNC_FLUSH +- add uninstall in Makefile +- Check for __cpluplus in zlib.h +- Better test in ct_align for partial flush +- avoid harmless warnings for Borland C++ +- initialize hash_head in deflate.c +- avoid warning on fdopen (gzio.c) for HP cc -Aa +- include stdlib.h for STDC compilers +- include errno.h for Cray +- ignore error if ranlib doesn't exist +- call ranlib twice for NeXTSTEP +- use exec_prefix instead of prefix for libz.a +- renamed ct_* as _tr_* to avoid conflict with applications +- clear z->msg in inflateInit2 before any error return +- initialize opaque in example.c, gzio.c, deflate.c and inflate.c +- fixed typo in zconf.h (_GNUC__ => __GNUC__) +- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode) +- fix typo in Make_vms.com (f$trnlnm -> f$getsyi) +- in fcalloc, normalize pointer if size > 65520 bytes +- don't use special fcalloc for 32 bit Borland C++ +- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc... +- use Z_BINARY instead of BINARY +- document that gzclose after gzdopen will close the file +- allow "a" as mode in gzopen. +- fix error checking in gzread +- allow skipping .gz extra-field on pipes +- added reference to Perl interface in README +- put the crc table in FAR data (I dislike more and more the medium model :) +- added get_crc_table +- added a dimension to all arrays (Borland C can't count). +- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast +- guard against multiple inclusion of *.h (for precompiled header on Mac) +- Watcom C pretends to be Microsoft C small model even in 32 bit mode. +- don't use unsized arrays to avoid silly warnings by Visual C++: + warning C4746: 'inflate_mask' : unsized array treated as '__far' + (what's wrong with far data in far model?). +- define enum out of inflate_blocks_state to allow compilation with C++ + +Changes in 0.95 (16 Aug 95) +- fix MSDOS small and medium model (now easier to adapt to any compiler) +- inlined send_bits +- fix the final (:-) bug for deflate with flush (output was correct but + not completely flushed in rare occasions). +- default window size is same for compression and decompression + (it's now sufficient to set MAX_WBITS in zconf.h). +- voidp -> voidpf and voidnp -> voidp (for consistency with other + typedefs and because voidnp was not near in large model). + +Changes in 0.94 (13 Aug 95) +- support MSDOS medium model +- fix deflate with flush (could sometimes generate bad output) +- fix deflateReset (zlib header was incorrectly suppressed) +- added support for VMS +- allow a compression level in gzopen() +- gzflush now calls fflush +- For deflate with flush, flush even if no more input is provided. +- rename libgz.a as libz.a +- avoid complex expression in infcodes.c triggering Turbo C bug +- work around a problem with gcc on Alpha (in INSERT_STRING) +- don't use inline functions (problem with some gcc versions) +- allow renaming of Byte, uInt, etc... with #define. +- avoid warning about (unused) pointer before start of array in deflate.c +- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c +- avoid reserved word 'new' in trees.c + +Changes in 0.93 (25 June 95) +- temporarily disable inline functions +- make deflate deterministic +- give enough lookahead for PARTIAL_FLUSH +- Set binary mode for stdin/stdout in minigzip.c for OS/2 +- don't even use signed char in inflate (not portable enough) +- fix inflate memory leak for segmented architectures + +Changes in 0.92 (3 May 95) +- don't assume that char is signed (problem on SGI) +- Clear bit buffer when starting a stored block +- no memcpy on Pyramid +- suppressed inftest.c +- optimized fill_window, put longest_match inline for gcc +- optimized inflate on stored blocks. +- untabify all sources to simplify patches + +Changes in 0.91 (2 May 95) +- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h +- Document the memory requirements in zconf.h +- added "make install" +- fix sync search logic in inflateSync +- deflate(Z_FULL_FLUSH) now works even if output buffer too short +- after inflateSync, don't scare people with just "lo world" +- added support for DJGPP + +Changes in 0.9 (1 May 95) +- don't assume that zalloc clears the allocated memory (the TurboC bug + was Mark's bug after all :) +- let again gzread copy uncompressed data unchanged (was working in 0.71) +- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented +- added a test of inflateSync in example.c +- moved MAX_WBITS to zconf.h because users might want to change that. +- document explicitly that zalloc(64K) on MSDOS must return a normalized + pointer (zero offset) +- added Makefiles for Microsoft C, Turbo C, Borland C++ +- faster crc32() + +Changes in 0.8 (29 April 95) +- added fast inflate (inffast.c) +- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this + is incompatible with previous versions of zlib which returned Z_OK. +- work around a TurboC compiler bug (bad code for b << 0, see infutil.h) + (actually that was not a compiler bug, see 0.81 above) +- gzread no longer reads one extra byte in certain cases +- In gzio destroy(), don't reference a freed structure +- avoid many warnings for MSDOS +- avoid the ERROR symbol which is used by MS Windows + +Changes in 0.71 (14 April 95) +- Fixed more MSDOS compilation problems :( There is still a bug with + TurboC large model. + +Changes in 0.7 (14 April 95) +- Added full inflate support. +- Simplified the crc32() interface. The pre- and post-conditioning + (one's complement) is now done inside crc32(). WARNING: this is + incompatible with previous versions; see zlib.h for the new usage. + +Changes in 0.61 (12 April 95) +- workaround for a bug in TurboC. example and minigzip now work on MSDOS. + +Changes in 0.6 (11 April 95) +- added minigzip.c +- added gzdopen to reopen a file descriptor as gzFile +- added transparent reading of non-gziped files in gzread. +- fixed bug in gzread (don't read crc as data) +- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose). +- don't allocate big arrays in the stack (for MSDOS) +- fix some MSDOS compilation problems + +Changes in 0.5: +- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but + not yet Z_FULL_FLUSH. +- support decompression but only in a single step (forced Z_FINISH) +- added opaque object for zalloc and zfree. +- added deflateReset and inflateReset +- added a variable zlib_version for consistency checking. +- renamed the 'filter' parameter of deflateInit2 as 'strategy'. + Added Z_FILTERED and Z_HUFFMAN_ONLY constants. + +Changes in 0.4: +- avoid "zip" everywhere, use zlib instead of ziplib. +- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush + if compression method == 8. +- added adler32 and crc32 +- renamed deflateOptions as deflateInit2, call one or the other but not both +- added the method parameter for deflateInit2. +- added inflateInit2 +- simplied considerably deflateInit and inflateInit by not supporting + user-provided history buffer. This is supported only in deflateInit2 + and inflateInit2. + +Changes in 0.3: +- prefix all macro names with Z_ +- use Z_FINISH instead of deflateEnd to finish compression. +- added Z_HUFFMAN_ONLY +- added gzerror() diff --git a/common/dist/zlib/FAQ b/common/dist/zlib/FAQ new file mode 100644 index 000000000..441d910da --- /dev/null +++ b/common/dist/zlib/FAQ @@ -0,0 +1,339 @@ + + Frequently Asked Questions about zlib + + +If your question is not there, please check the zlib home page +http://www.zlib.org which may have more recent information. +The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html + + + 1. Is zlib Y2K-compliant? + + Yes. zlib doesn't handle dates. + + 2. Where can I get a Windows DLL version? + + The zlib sources can be compiled without change to produce a DLL. + See the file win32/DLL_FAQ.txt in the zlib distribution. + Pointers to the precompiled DLL are found in the zlib web site at + http://www.zlib.org. + + 3. Where can I get a Visual Basic interface to zlib? + + See + * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm + * contrib/visual-basic.txt in the zlib distribution + * win32/DLL_FAQ.txt in the zlib distribution + + 4. compress() returns Z_BUF_ERROR. + + Make sure that before the call of compress, the length of the compressed + buffer is equal to the total size of the compressed buffer and not + zero. For Visual Basic, check that this parameter is passed by reference + ("as any"), not by value ("as long"). + + 5. deflate() or inflate() returns Z_BUF_ERROR. + + Before making the call, make sure that avail_in and avail_out are not + zero. When setting the parameter flush equal to Z_FINISH, also make sure + that avail_out is big enough to allow processing all pending input. + Note that a Z_BUF_ERROR is not fatal--another call to deflate() or + inflate() can be made with more input or output space. A Z_BUF_ERROR + may in fact be unavoidable depending on how the functions are used, since + it is not possible to tell whether or not there is more output pending + when strm.avail_out returns with zero. + + 6. Where's the zlib documentation (man pages, etc.)? + + It's in zlib.h for the moment, and Francis S. Lin has converted it to a + web page zlib.html. Volunteers to transform this to Unix-style man pages, + please contact us (zlib@gzip.org). Examples of zlib usage are in the files + example.c and minigzip.c. + + 7. Why don't you use GNU autoconf or libtool or ...? + + Because we would like to keep zlib as a very small and simple + package. zlib is rather portable and doesn't need much configuration. + + 8. I found a bug in zlib. + + Most of the time, such problems are due to an incorrect usage of + zlib. Please try to reproduce the problem with a small program and send + the corresponding source to us at zlib@gzip.org . Do not send + multi-megabyte data files without prior agreement. + + 9. Why do I get "undefined reference to gzputc"? + + If "make test" produces something like + + example.o(.text+0x154): undefined reference to `gzputc' + + check that you don't have old files libz.* in /usr/lib, /usr/local/lib or + /usr/X11R6/lib. Remove any old versions, then do "make install". + +10. I need a Delphi interface to zlib. + + See the contrib/delphi directory in the zlib distribution. + +11. Can zlib handle .zip archives? + + Not by itself, no. See the directory contrib/minizip in the zlib + distribution. + +12. Can zlib handle .Z files? + + No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt + the code of uncompress on your own. + +13. How can I make a Unix shared library? + + make clean + ./configure -s + make + +14. How do I install a shared zlib library on Unix? + + After the above, then: + + make install + + However, many flavors of Unix come with a shared zlib already installed. + Before going to the trouble of compiling a shared version of zlib and + trying to install it, you may want to check if it's already there! If you + can #include , it's there. The -lz option will probably link to it. + +15. I have a question about OttoPDF. + + We are not the authors of OttoPDF. The real author is on the OttoPDF web + site: Joel Hainley, jhainley@myndkryme.com. + +16. Can zlib decode Flate data in an Adobe PDF file? + + Yes. See http://www.fastio.com/ (ClibPDF), or http://www.pdflib.com/ . + To modify PDF forms, see http://sourceforge.net/projects/acroformtool/ . + +17. Why am I getting this "register_frame_info not found" error on Solaris? + + After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib + generates an error such as: + + ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so: + symbol __register_frame_info: referenced symbol not found + + The symbol __register_frame_info is not part of zlib, it is generated by + the C compiler (cc or gcc). You must recompile applications using zlib + which have this problem. This problem is specific to Solaris. See + http://www.sunfreeware.com for Solaris versions of zlib and applications + using zlib. + +18. Why does gzip give an error on a file I make with compress/deflate? + + The compress and deflate functions produce data in the zlib format, which + is different and incompatible with the gzip format. The gz* functions in + zlib on the other hand use the gzip format. Both the zlib and gzip + formats use the same compressed data format internally, but have different + headers and trailers around the compressed data. + +19. Ok, so why are there two different formats? + + The gzip format was designed to retain the directory information about + a single file, such as the name and last modification date. The zlib + format on the other hand was designed for in-memory and communication + channel applications, and has a much more compact header and trailer and + uses a faster integrity check than gzip. + +20. Well that's nice, but how do I make a gzip file in memory? + + You can request that deflate write the gzip format instead of the zlib + format using deflateInit2(). You can also request that inflate decode + the gzip format using inflateInit2(). Read zlib.h for more details. + +21. Is zlib thread-safe? + + Yes. However any library routines that zlib uses and any application- + provided memory allocation routines must also be thread-safe. zlib's gz* + functions use stdio library routines, and most of zlib's functions use the + library memory allocation routines by default. zlib's Init functions allow + for the application to provide custom memory allocation routines. + + Of course, you should only operate on any given zlib or gzip stream from a + single thread at a time. + +22. Can I use zlib in my commercial application? + + Yes. Please read the license in zlib.h. + +23. Is zlib under the GNU license? + + No. Please read the license in zlib.h. + +24. The license says that altered source versions must be "plainly marked". So + what exactly do I need to do to meet that requirement? + + You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In + particular, the final version number needs to be changed to "f", and an + identification string should be appended to ZLIB_VERSION. Version numbers + x.x.x.f are reserved for modifications to zlib by others than the zlib + maintainers. For example, if the version of the base zlib you are altering + is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and + ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also + update the version strings in deflate.c and inftrees.c. + + For altered source distributions, you should also note the origin and + nature of the changes in zlib.h, as well as in ChangeLog and README, along + with the dates of the alterations. The origin should include at least your + name (or your company's name), and an email address to contact for help or + issues with the library. + + Note that distributing a compiled zlib library along with zlib.h and + zconf.h is also a source distribution, and so you should change + ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes + in zlib.h as you would for a full source distribution. + +25. Will zlib work on a big-endian or little-endian architecture, and can I + exchange compressed data between them? + + Yes and yes. + +26. Will zlib work on a 64-bit machine? + + It should. It has been tested on 64-bit machines, and has no dependence + on any data types being limited to 32-bits in length. If you have any + difficulties, please provide a complete problem report to zlib@gzip.org + +27. Will zlib decompress data from the PKWare Data Compression Library? + + No. The PKWare DCL uses a completely different compressed data format + than does PKZIP and zlib. However, you can look in zlib's contrib/blast + directory for a possible solution to your problem. + +28. Can I access data randomly in a compressed stream? + + No, not without some preparation. If when compressing you periodically + use Z_FULL_FLUSH, carefully write all the pending data at those points, + and keep an index of those locations, then you can start decompression + at those points. You have to be careful to not use Z_FULL_FLUSH too + often, since it can significantly degrade compression. + +29. Does zlib work on MVS, OS/390, CICS, etc.? + + We don't know for sure. We have heard occasional reports of success on + these systems. If you do use it on one of these, please provide us with + a report, instructions, and patches that we can reference when we get + these questions. Thanks. + +30. Is there some simpler, easier to read version of inflate I can look at + to understand the deflate format? + + First off, you should read RFC 1951. Second, yes. Look in zlib's + contrib/puff directory. + +31. Does zlib infringe on any patents? + + As far as we know, no. In fact, that was originally the whole point behind + zlib. Look here for some more information: + + http://www.gzip.org/#faq11 + +32. Can zlib work with greater than 4 GB of data? + + Yes. inflate() and deflate() will process any amount of data correctly. + Each call of inflate() or deflate() is limited to input and output chunks + of the maximum value that can be stored in the compiler's "unsigned int" + type, but there is no limit to the number of chunks. Note however that the + strm.total_in and strm_total_out counters may be limited to 4 GB. These + counters are provided as a convenience and are not used internally by + inflate() or deflate(). The application can easily set up its own counters + updated after each call of inflate() or deflate() to count beyond 4 GB. + compress() and uncompress() may be limited to 4 GB, since they operate in a + single call. gzseek() and gztell() may be limited to 4 GB depending on how + zlib is compiled. See the zlibCompileFlags() function in zlib.h. + + The word "may" appears several times above since there is a 4 GB limit + only if the compiler's "long" type is 32 bits. If the compiler's "long" + type is 64 bits, then the limit is 16 exabytes. + +33. Does zlib have any security vulnerabilities? + + The only one that we are aware of is potentially in gzprintf(). If zlib + is compiled to use sprintf() or vsprintf(), then there is no protection + against a buffer overflow of a 4K string space, other than the caller of + gzprintf() assuring that the output will not exceed 4K. On the other + hand, if zlib is compiled to use snprintf() or vsnprintf(), which should + normally be the case, then there is no vulnerability. The ./configure + script will display warnings if an insecure variation of sprintf() will + be used by gzprintf(). Also the zlibCompileFlags() function will return + information on what variant of sprintf() is used by gzprintf(). + + If you don't have snprintf() or vsnprintf() and would like one, you can + find a portable implementation here: + + http://www.ijs.si/software/snprintf/ + + Note that you should be using the most recent version of zlib. Versions + 1.1.3 and before were subject to a double-free vulnerability. + +34. Is there a Java version of zlib? + + Probably what you want is to use zlib in Java. zlib is already included + as part of the Java SDK in the java.util.zip package. If you really want + a version of zlib written in the Java language, look on the zlib home + page for links: http://www.zlib.org/ + +35. I get this or that compiler or source-code scanner warning when I crank it + up to maximally-pedantic. Can't you guys write proper code? + + Many years ago, we gave up attempting to avoid warnings on every compiler + in the universe. It just got to be a waste of time, and some compilers + were downright silly. So now, we simply make sure that the code always + works. + +36. Valgrind (or some similar memory access checker) says that deflate is + performing a conditional jump that depends on an uninitialized value. + Isn't that a bug? + + No. That is intentional for performance reasons, and the output of + deflate is not affected. This only started showing up recently since + zlib 1.2.x uses malloc() by default for allocations, whereas earlier + versions used calloc(), which zeros out the allocated memory. + +37. Will zlib read the (insert any ancient or arcane format here) compressed + data format? + + Probably not. Look in the comp.compression FAQ for pointers to various + formats and associated software. + +38. How can I encrypt/decrypt zip files with zlib? + + zlib doesn't support encryption. The original PKZIP encryption is very weak + and can be broken with freely available programs. To get strong encryption, + use GnuPG, http://www.gnupg.org/ , which already includes zlib compression. + For PKZIP compatible "encryption", look at http://www.info-zip.org/ + +39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings? + + "gzip" is the gzip format, and "deflate" is the zlib format. They should + probably have called the second one "zlib" instead to avoid confusion + with the raw deflate compressed data format. While the HTTP 1.1 RFC 2616 + correctly points to the zlib specification in RFC 1950 for the "deflate" + transfer encoding, there have been reports of servers and browsers that + incorrectly produce or expect raw deflate data per the deflate + specficiation in RFC 1951, most notably Microsoft. So even though the + "deflate" transfer encoding using the zlib format would be the more + efficient approach (and in fact exactly what the zlib format was designed + for), using the "gzip" transfer encoding is probably more reliable due to + an unfortunate choice of name on the part of the HTTP 1.1 authors. + + Bottom line: use the gzip format for HTTP 1.1 encoding. + +40. Does zlib support the new "Deflate64" format introduced by PKWare? + + No. PKWare has apparently decided to keep that format proprietary, since + they have not documented it as they have previous compression formats. + In any case, the compression improvements are so modest compared to other + more modern approaches, that it's not worth the effort to implement. + +41. Can you please sign these lengthy legal documents and fax them back to us + so that we can use your software in our product? + + No. Go away. Shoo. diff --git a/common/dist/zlib/INDEX b/common/dist/zlib/INDEX new file mode 100644 index 000000000..0587e5902 --- /dev/null +++ b/common/dist/zlib/INDEX @@ -0,0 +1,51 @@ +ChangeLog history of changes +FAQ Frequently Asked Questions about zlib +INDEX this file +Makefile makefile for Unix (generated by configure) +Makefile.in makefile for Unix (template for configure) +README guess what +algorithm.txt description of the (de)compression algorithm +configure configure script for Unix +zconf.in.h template for zconf.h (used by configure) + +amiga/ makefiles for Amiga SAS C +as400/ makefiles for IBM AS/400 +msdos/ makefiles for MSDOS +old/ makefiles for various architectures and zlib documentation + files that have not yet been updated for zlib 1.2.x +projects/ projects for various Integrated Development Environments +qnx/ makefiles for QNX +win32/ makefiles for Windows + + zlib public header files (must be kept): +zconf.h +zlib.h + + private source files used to build the zlib library: +adler32.c +compress.c +crc32.c +crc32.h +deflate.c +deflate.h +gzio.c +infback.c +inffast.c +inffast.h +inffixed.h +inflate.c +inflate.h +inftrees.c +inftrees.h +trees.c +trees.h +uncompr.c +zutil.c +zutil.h + + source files for sample programs: +example.c +minigzip.c + + unsupported contribution by third parties +See contrib/README.contrib diff --git a/common/dist/zlib/Makefile b/common/dist/zlib/Makefile new file mode 100644 index 000000000..2fd6e45c4 --- /dev/null +++ b/common/dist/zlib/Makefile @@ -0,0 +1,154 @@ +# Makefile for zlib +# Copyright (C) 1995-2005 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile and test, type: +# ./configure; make test +# The call of configure is optional if you don't have special requirements +# If you wish to build zlib as a shared library, use: ./configure -s + +# To use the asm code, type: +# cp contrib/asm?86/match.S ./match.S +# make LOC=-DASMV OBJA=match.o + +# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type: +# make install +# To install in $HOME instead of /usr/local, use: +# make install prefix=$HOME + +CC=cc + +CFLAGS=-O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-g -DDEBUG +#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ +# -Wstrict-prototypes -Wmissing-prototypes + +LDFLAGS=libz.a +LDSHARED=$(CC) +CPP=$(CC) -E + +LIBS=libz.a +SHAREDLIB=libz.so +SHAREDLIBV=libz.so.1.2.3 +SHAREDLIBM=libz.so.1 + +AR=ar rc +RANLIB=ranlib +TAR=tar +SHELL=/bin/sh +EXE= + +prefix = /usr/local +exec_prefix = ${prefix} +libdir = ${exec_prefix}/lib +includedir = ${prefix}/include +mandir = ${prefix}/share/man +man3dir = ${mandir}/man3 + +OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \ + zutil.o inflate.o infback.o inftrees.o inffast.o + +OBJA = +# to use the asm code: make OBJA=match.o + +TEST_OBJS = example.o minigzip.o + +all: example$(EXE) minigzip$(EXE) + +check: test +test: all + @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \ + echo hello world | ./minigzip | ./minigzip -d || \ + echo ' *** minigzip test FAILED ***' ; \ + if ./example; then \ + echo ' *** zlib test OK ***'; \ + else \ + echo ' *** zlib test FAILED ***'; \ + fi + +libz.a: $(OBJS) $(OBJA) + $(AR) $@ $(OBJS) $(OBJA) + -@ ($(RANLIB) $@ || true) >/dev/null 2>&1 + +match.o: match.S + $(CPP) match.S > _match.s + $(CC) -c _match.s + mv _match.o match.o + rm -f _match.s + +$(SHAREDLIBV): $(OBJS) + $(LDSHARED) -o $@ $(OBJS) + rm -f $(SHAREDLIB) $(SHAREDLIBM) + ln -s $@ $(SHAREDLIB) + ln -s $@ $(SHAREDLIBM) + +example$(EXE): example.o $(LIBS) + $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS) + +minigzip$(EXE): minigzip.o $(LIBS) + $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS) + +install: $(LIBS) + -@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi + -@if [ ! -d $(includedir) ]; then mkdir -p $(includedir); fi + -@if [ ! -d $(libdir) ]; then mkdir -p $(libdir); fi + -@if [ ! -d $(man3dir) ]; then mkdir -p $(man3dir); fi + cp zlib.h zconf.h $(includedir) + chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h + cp $(LIBS) $(libdir) + cd $(libdir); chmod 755 $(LIBS) + -@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1 + cd $(libdir); if test -f $(SHAREDLIBV); then \ + rm -f $(SHAREDLIB) $(SHAREDLIBM); \ + ln -s $(SHAREDLIBV) $(SHAREDLIB); \ + ln -s $(SHAREDLIBV) $(SHAREDLIBM); \ + (ldconfig || true) >/dev/null 2>&1; \ + fi + cp zlib.3 $(man3dir) + chmod 644 $(man3dir)/zlib.3 +# The ranlib in install is needed on NeXTSTEP which checks file times +# ldconfig is for Linux + +uninstall: + cd $(includedir); \ + cd $(libdir); rm -f libz.a; \ + if test -f $(SHAREDLIBV); then \ + rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \ + fi + cd $(man3dir); rm -f zlib.3 + +mostlyclean: clean +clean: + rm -f *.o *~ example$(EXE) minigzip$(EXE) \ + libz.* foo.gz so_locations \ + _match.s maketree contrib/infback9/*.o + +maintainer-clean: distclean +distclean: clean + cp -p Makefile.in Makefile + cp -p zconf.in.h zconf.h + rm -f .DS_Store + +tags: + etags *.[ch] + +depend: + makedepend -- $(CFLAGS) -- *.[ch] + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: crc32.h zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +example.o: zlib.h zconf.h +gzio.o: zutil.h zlib.h zconf.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +minigzip.o: zlib.h zconf.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/common/dist/zlib/Makefile.in b/common/dist/zlib/Makefile.in new file mode 100644 index 000000000..2fd6e45c4 --- /dev/null +++ b/common/dist/zlib/Makefile.in @@ -0,0 +1,154 @@ +# Makefile for zlib +# Copyright (C) 1995-2005 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile and test, type: +# ./configure; make test +# The call of configure is optional if you don't have special requirements +# If you wish to build zlib as a shared library, use: ./configure -s + +# To use the asm code, type: +# cp contrib/asm?86/match.S ./match.S +# make LOC=-DASMV OBJA=match.o + +# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type: +# make install +# To install in $HOME instead of /usr/local, use: +# make install prefix=$HOME + +CC=cc + +CFLAGS=-O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-g -DDEBUG +#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ +# -Wstrict-prototypes -Wmissing-prototypes + +LDFLAGS=libz.a +LDSHARED=$(CC) +CPP=$(CC) -E + +LIBS=libz.a +SHAREDLIB=libz.so +SHAREDLIBV=libz.so.1.2.3 +SHAREDLIBM=libz.so.1 + +AR=ar rc +RANLIB=ranlib +TAR=tar +SHELL=/bin/sh +EXE= + +prefix = /usr/local +exec_prefix = ${prefix} +libdir = ${exec_prefix}/lib +includedir = ${prefix}/include +mandir = ${prefix}/share/man +man3dir = ${mandir}/man3 + +OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \ + zutil.o inflate.o infback.o inftrees.o inffast.o + +OBJA = +# to use the asm code: make OBJA=match.o + +TEST_OBJS = example.o minigzip.o + +all: example$(EXE) minigzip$(EXE) + +check: test +test: all + @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \ + echo hello world | ./minigzip | ./minigzip -d || \ + echo ' *** minigzip test FAILED ***' ; \ + if ./example; then \ + echo ' *** zlib test OK ***'; \ + else \ + echo ' *** zlib test FAILED ***'; \ + fi + +libz.a: $(OBJS) $(OBJA) + $(AR) $@ $(OBJS) $(OBJA) + -@ ($(RANLIB) $@ || true) >/dev/null 2>&1 + +match.o: match.S + $(CPP) match.S > _match.s + $(CC) -c _match.s + mv _match.o match.o + rm -f _match.s + +$(SHAREDLIBV): $(OBJS) + $(LDSHARED) -o $@ $(OBJS) + rm -f $(SHAREDLIB) $(SHAREDLIBM) + ln -s $@ $(SHAREDLIB) + ln -s $@ $(SHAREDLIBM) + +example$(EXE): example.o $(LIBS) + $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS) + +minigzip$(EXE): minigzip.o $(LIBS) + $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS) + +install: $(LIBS) + -@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi + -@if [ ! -d $(includedir) ]; then mkdir -p $(includedir); fi + -@if [ ! -d $(libdir) ]; then mkdir -p $(libdir); fi + -@if [ ! -d $(man3dir) ]; then mkdir -p $(man3dir); fi + cp zlib.h zconf.h $(includedir) + chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h + cp $(LIBS) $(libdir) + cd $(libdir); chmod 755 $(LIBS) + -@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1 + cd $(libdir); if test -f $(SHAREDLIBV); then \ + rm -f $(SHAREDLIB) $(SHAREDLIBM); \ + ln -s $(SHAREDLIBV) $(SHAREDLIB); \ + ln -s $(SHAREDLIBV) $(SHAREDLIBM); \ + (ldconfig || true) >/dev/null 2>&1; \ + fi + cp zlib.3 $(man3dir) + chmod 644 $(man3dir)/zlib.3 +# The ranlib in install is needed on NeXTSTEP which checks file times +# ldconfig is for Linux + +uninstall: + cd $(includedir); \ + cd $(libdir); rm -f libz.a; \ + if test -f $(SHAREDLIBV); then \ + rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \ + fi + cd $(man3dir); rm -f zlib.3 + +mostlyclean: clean +clean: + rm -f *.o *~ example$(EXE) minigzip$(EXE) \ + libz.* foo.gz so_locations \ + _match.s maketree contrib/infback9/*.o + +maintainer-clean: distclean +distclean: clean + cp -p Makefile.in Makefile + cp -p zconf.in.h zconf.h + rm -f .DS_Store + +tags: + etags *.[ch] + +depend: + makedepend -- $(CFLAGS) -- *.[ch] + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: crc32.h zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +example.o: zlib.h zconf.h +gzio.o: zutil.h zlib.h zconf.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +minigzip.o: zlib.h zconf.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/common/dist/zlib/README b/common/dist/zlib/README new file mode 100644 index 000000000..758cc5002 --- /dev/null +++ b/common/dist/zlib/README @@ -0,0 +1,125 @@ +ZLIB DATA COMPRESSION LIBRARY + +zlib 1.2.3 is a general purpose data compression library. All the code is +thread safe. The data format used by the zlib library is described by RFCs +(Request for Comments) 1950 to 1952 in the files +http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format) +and rfc1952.txt (gzip format). These documents are also available in other +formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html + +All functions of the compression library are documented in the file zlib.h +(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example +of the library is given in the file example.c which also tests that the library +is working correctly. Another example is given in the file minigzip.c. The +compression library itself is composed of all source files except example.c and +minigzip.c. + +To compile all files and run the test program, follow the instructions given at +the top of Makefile. In short "make test; make install" should work for most +machines. For Unix: "./configure; make test; make install". For MSDOS, use one +of the special makefiles such as Makefile.msc. For VMS, use make_vms.com. + +Questions about zlib should be sent to , or to Gilles Vollant + for the Windows DLL version. The zlib home page is +http://www.zlib.org or http://www.gzip.org/zlib/ Before reporting a problem, +please check this site to verify that you have the latest version of zlib; +otherwise get the latest version and check whether the problem still exists or +not. + +PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html before asking +for help. + +Mark Nelson wrote an article about zlib for the Jan. 1997 +issue of Dr. Dobb's Journal; a copy of the article is available in +http://dogma.net/markn/articles/zlibtool/zlibtool.htm + +The changes made in version 1.2.3 are documented in the file ChangeLog. + +Unsupported third party contributions are provided in directory "contrib". + +A Java implementation of zlib is available in the Java Development Kit +http://java.sun.com/j2se/1.4.2/docs/api/java/util/zip/package-summary.html +See the zlib home page http://www.zlib.org for details. + +A Perl interface to zlib written by Paul Marquess is in the +CPAN (Comprehensive Perl Archive Network) sites +http://www.cpan.org/modules/by-module/Compress/ + +A Python interface to zlib written by A.M. Kuchling is +available in Python 1.5 and later versions, see +http://www.python.org/doc/lib/module-zlib.html + +A zlib binding for TCL written by Andreas Kupries is +availlable at http://www.oche.de/~akupries/soft/trf/trf_zip.html + +An experimental package to read and write files in .zip format, written on top +of zlib by Gilles Vollant , is available in the +contrib/minizip directory of zlib. + + +Notes for some targets: + +- For Windows DLL versions, please see win32/DLL_FAQ.txt + +- For 64-bit Irix, deflate.c must be compiled without any optimization. With + -O, one libpng test fails. The test works in 32 bit mode (with the -n32 + compiler flag). The compiler bug has been reported to SGI. + +- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works + when compiled with cc. + +- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is + necessary to get gzprintf working correctly. This is done by configure. + +- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with + other compilers. Use "make test" to check your compiler. + +- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers. + +- For PalmOs, see http://palmzlib.sourceforge.net/ + +- When building a shared, i.e. dynamic library on Mac OS X, the library must be + installed before testing (do "make install" before "make test"), since the + library location is specified in the library. + + +Acknowledgments: + + The deflate format used by zlib was defined by Phil Katz. The deflate + and zlib specifications were written by L. Peter Deutsch. Thanks to all the + people who reported problems and suggested various improvements in zlib; + they are too numerous to cite here. + +Copyright notice: + + (C) 1995-2004 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + +If you use the zlib library in a product, we would appreciate *not* +receiving lengthy legal documents to sign. The sources are provided +for free but without warranty of any kind. The library has been +entirely written by Jean-loup Gailly and Mark Adler; it does not +include third-party code. + +If you redistribute modified sources, we would appreciate that you include +in the file ChangeLog history information documenting your changes. Please +read the FAQ for more information on the distribution of modified source +versions. diff --git a/common/dist/zlib/adler32.c b/common/dist/zlib/adler32.c new file mode 100644 index 000000000..d365a3a01 --- /dev/null +++ b/common/dist/zlib/adler32.c @@ -0,0 +1,151 @@ +/* $NetBSD: adler32.c,v 1.1.1.1 2006/01/14 20:10:24 christos Exp $ */ + +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995-2004 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) Id */ + +#define ZLIB_INTERNAL +#include "zlib.h" + +#define BASE 65521UL /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} +#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); +#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); +#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); +#define DO16(buf) DO8(buf,0); DO8(buf,8); + +/* use NO_DIVIDE if your processor does not do division in hardware */ +#ifdef NO_DIVIDE +# define MOD(a) \ + do { \ + if (a >= (BASE << 16)) a -= (BASE << 16); \ + if (a >= (BASE << 15)) a -= (BASE << 15); \ + if (a >= (BASE << 14)) a -= (BASE << 14); \ + if (a >= (BASE << 13)) a -= (BASE << 13); \ + if (a >= (BASE << 12)) a -= (BASE << 12); \ + if (a >= (BASE << 11)) a -= (BASE << 11); \ + if (a >= (BASE << 10)) a -= (BASE << 10); \ + if (a >= (BASE << 9)) a -= (BASE << 9); \ + if (a >= (BASE << 8)) a -= (BASE << 8); \ + if (a >= (BASE << 7)) a -= (BASE << 7); \ + if (a >= (BASE << 6)) a -= (BASE << 6); \ + if (a >= (BASE << 5)) a -= (BASE << 5); \ + if (a >= (BASE << 4)) a -= (BASE << 4); \ + if (a >= (BASE << 3)) a -= (BASE << 3); \ + if (a >= (BASE << 2)) a -= (BASE << 2); \ + if (a >= (BASE << 1)) a -= (BASE << 1); \ + if (a >= BASE) a -= BASE; \ + } while (0) +# define MOD4(a) \ + do { \ + if (a >= (BASE << 4)) a -= (BASE << 4); \ + if (a >= (BASE << 3)) a -= (BASE << 3); \ + if (a >= (BASE << 2)) a -= (BASE << 2); \ + if (a >= (BASE << 1)) a -= (BASE << 1); \ + if (a >= BASE) a -= BASE; \ + } while (0) +#else +# define MOD(a) a %= BASE +# define MOD4(a) a %= BASE +#endif + +/* ========================================================================= */ +uLong ZEXPORT adler32(adler, buf, len) + uLong adler; + const Bytef *buf; + uInt len; +{ + unsigned long sum2; + unsigned n; + + /* split Adler-32 into component sums */ + sum2 = (adler >> 16) & 0xffff; + adler &= 0xffff; + + /* in case user likes doing a byte at a time, keep it fast */ + if (len == 1) { + adler += buf[0]; + if (adler >= BASE) + adler -= BASE; + sum2 += adler; + if (sum2 >= BASE) + sum2 -= BASE; + return adler | (sum2 << 16); + } + + /* initial Adler-32 value (deferred check for len == 1 speed) */ + if (buf == Z_NULL) + return 1L; + + /* in case short lengths are provided, keep it somewhat fast */ + if (len < 16) { + while (len--) { + adler += *buf++; + sum2 += adler; + } + if (adler >= BASE) + adler -= BASE; + MOD4(sum2); /* only added so many BASE's */ + return adler | (sum2 << 16); + } + + /* do length NMAX blocks -- requires just one modulo operation */ + while (len >= NMAX) { + len -= NMAX; + n = NMAX / 16; /* NMAX is divisible by 16 */ + do { + DO16(buf); /* 16 sums unrolled */ + buf += 16; + } while (--n); + MOD(adler); + MOD(sum2); + } + + /* do remaining bytes (less than NMAX, still just one modulo) */ + if (len) { /* avoid modulos if none remaining */ + while (len >= 16) { + len -= 16; + DO16(buf); + buf += 16; + } + while (len--) { + adler += *buf++; + sum2 += adler; + } + MOD(adler); + MOD(sum2); + } + + /* return recombined sums */ + return adler | (sum2 << 16); +} + +/* ========================================================================= */ +uLong ZEXPORT adler32_combine(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off_t len2; +{ + unsigned long sum1; + unsigned long sum2; + unsigned rem; + + /* the derivation of this formula is left as an exercise for the reader */ + rem = (unsigned)(len2 % BASE); + sum1 = adler1 & 0xffff; + sum2 = rem * sum1; + MOD(sum2); + sum1 += (adler2 & 0xffff) + BASE - 1; + sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem; + if (sum1 > BASE) sum1 -= BASE; + if (sum1 > BASE) sum1 -= BASE; + if (sum2 > (BASE << 1)) sum2 -= (BASE << 1); + if (sum2 > BASE) sum2 -= BASE; + return sum1 | (sum2 << 16); +} diff --git a/common/dist/zlib/algorithm.txt b/common/dist/zlib/algorithm.txt new file mode 100644 index 000000000..b022dde31 --- /dev/null +++ b/common/dist/zlib/algorithm.txt @@ -0,0 +1,209 @@ +1. Compression algorithm (deflate) + +The deflation algorithm used by gzip (also zip and zlib) is a variation of +LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in +the input data. The second occurrence of a string is replaced by a +pointer to the previous string, in the form of a pair (distance, +length). Distances are limited to 32K bytes, and lengths are limited +to 258 bytes. When a string does not occur anywhere in the previous +32K bytes, it is emitted as a sequence of literal bytes. (In this +description, `string' must be taken as an arbitrary sequence of bytes, +and is not restricted to printable characters.) + +Literals or match lengths are compressed with one Huffman tree, and +match distances are compressed with another tree. The trees are stored +in a compact form at the start of each block. The blocks can have any +size (except that the compressed data for one block must fit in +available memory). A block is terminated when deflate() determines that +it would be useful to start another block with fresh trees. (This is +somewhat similar to the behavior of LZW-based _compress_.) + +Duplicated strings are found using a hash table. All input strings of +length 3 are inserted in the hash table. A hash index is computed for +the next 3 bytes. If the hash chain for this index is not empty, all +strings in the chain are compared with the current input string, and +the longest match is selected. + +The hash chains are searched starting with the most recent strings, to +favor small distances and thus take advantage of the Huffman encoding. +The hash chains are singly linked. There are no deletions from the +hash chains, the algorithm simply discards matches that are too old. + +To avoid a worst-case situation, very long hash chains are arbitrarily +truncated at a certain length, determined by a runtime option (level +parameter of deflateInit). So deflate() does not always find the longest +possible match but generally finds a match which is long enough. + +deflate() also defers the selection of matches with a lazy evaluation +mechanism. After a match of length N has been found, deflate() searches for +a longer match at the next input byte. If a longer match is found, the +previous match is truncated to a length of one (thus producing a single +literal byte) and the process of lazy evaluation begins again. Otherwise, +the original match is kept, and the next match search is attempted only N +steps later. + +The lazy match evaluation is also subject to a runtime parameter. If +the current match is long enough, deflate() reduces the search for a longer +match, thus speeding up the whole process. If compression ratio is more +important than speed, deflate() attempts a complete second search even if +the first match is already long enough. + +The lazy match evaluation is not performed for the fastest compression +modes (level parameter 1 to 3). For these fast modes, new strings +are inserted in the hash table only when no match was found, or +when the match is not too long. This degrades the compression ratio +but saves time since there are both fewer insertions and fewer searches. + + +2. Decompression algorithm (inflate) + +2.1 Introduction + +The key question is how to represent a Huffman code (or any prefix code) so +that you can decode fast. The most important characteristic is that shorter +codes are much more common than longer codes, so pay attention to decoding the +short codes fast, and let the long codes take longer to decode. + +inflate() sets up a first level table that covers some number of bits of +input less than the length of longest code. It gets that many bits from the +stream, and looks it up in the table. The table will tell if the next +code is that many bits or less and how many, and if it is, it will tell +the value, else it will point to the next level table for which inflate() +grabs more bits and tries to decode a longer code. + +How many bits to make the first lookup is a tradeoff between the time it +takes to decode and the time it takes to build the table. If building the +table took no time (and if you had infinite memory), then there would only +be a first level table to cover all the way to the longest code. However, +building the table ends up taking a lot longer for more bits since short +codes are replicated many times in such a table. What inflate() does is +simply to make the number of bits in the first table a variable, and then +to set that variable for the maximum speed. + +For inflate, which has 286 possible codes for the literal/length tree, the size +of the first table is nine bits. Also the distance trees have 30 possible +values, and the size of the first table is six bits. Note that for each of +those cases, the table ended up one bit longer than the ``average'' code +length, i.e. the code length of an approximately flat code which would be a +little more than eight bits for 286 symbols and a little less than five bits +for 30 symbols. + + +2.2 More details on the inflate table lookup + +Ok, you want to know what this cleverly obfuscated inflate tree actually +looks like. You are correct that it's not a Huffman tree. It is simply a +lookup table for the first, let's say, nine bits of a Huffman symbol. The +symbol could be as short as one bit or as long as 15 bits. If a particular +symbol is shorter than nine bits, then that symbol's translation is duplicated +in all those entries that start with that symbol's bits. For example, if the +symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a +symbol is nine bits long, it appears in the table once. + +If the symbol is longer than nine bits, then that entry in the table points +to another similar table for the remaining bits. Again, there are duplicated +entries as needed. The idea is that most of the time the symbol will be short +and there will only be one table look up. (That's whole idea behind data +compression in the first place.) For the less frequent long symbols, there +will be two lookups. If you had a compression method with really long +symbols, you could have as many levels of lookups as is efficient. For +inflate, two is enough. + +So a table entry either points to another table (in which case nine bits in +the above example are gobbled), or it contains the translation for the symbol +and the number of bits to gobble. Then you start again with the next +ungobbled bit. + +You may wonder: why not just have one lookup table for how ever many bits the +longest symbol is? The reason is that if you do that, you end up spending +more time filling in duplicate symbol entries than you do actually decoding. +At least for deflate's output that generates new trees every several 10's of +kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code +would take too long if you're only decoding several thousand symbols. At the +other extreme, you could make a new table for every bit in the code. In fact, +that's essentially a Huffman tree. But then you spend two much time +traversing the tree while decoding, even for short symbols. + +So the number of bits for the first lookup table is a trade of the time to +fill out the table vs. the time spent looking at the second level and above of +the table. + +Here is an example, scaled down: + +The code being decoded, with 10 symbols, from 1 to 6 bits long: + +A: 0 +B: 10 +C: 1100 +D: 11010 +E: 11011 +F: 11100 +G: 11101 +H: 11110 +I: 111110 +J: 111111 + +Let's make the first table three bits long (eight entries): + +000: A,1 +001: A,1 +010: A,1 +011: A,1 +100: B,2 +101: B,2 +110: -> table X (gobble 3 bits) +111: -> table Y (gobble 3 bits) + +Each entry is what the bits decode as and how many bits that is, i.e. how +many bits to gobble. Or the entry points to another table, with the number of +bits to gobble implicit in the size of the table. + +Table X is two bits long since the longest code starting with 110 is five bits +long: + +00: C,1 +01: C,1 +10: D,2 +11: E,2 + +Table Y is three bits long since the longest code starting with 111 is six +bits long: + +000: F,2 +001: F,2 +010: G,2 +011: G,2 +100: H,2 +101: H,2 +110: I,3 +111: J,3 + +So what we have here are three tables with a total of 20 entries that had to +be constructed. That's compared to 64 entries for a single table. Or +compared to 16 entries for a Huffman tree (six two entry tables and one four +entry table). Assuming that the code ideally represents the probability of +the symbols, it takes on the average 1.25 lookups per symbol. That's compared +to one lookup for the single table, or 1.66 lookups per symbol for the +Huffman tree. + +There, I think that gives you a picture of what's going on. For inflate, the +meaning of a particular symbol is often more than just a letter. It can be a +byte (a "literal"), or it can be either a length or a distance which +indicates a base value and a number of bits to fetch after the code that is +added to the base value. Or it might be the special end-of-block code. The +data structures created in inftrees.c try to encode all that information +compactly in the tables. + + +Jean-loup Gailly Mark Adler +jloup@gzip.org madler@alumni.caltech.edu + + +References: + +[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data +Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3, +pp. 337-343. + +``DEFLATE Compressed Data Format Specification'' available in +http://www.ietf.org/rfc/rfc1951.txt diff --git a/common/dist/zlib/amiga/Makefile.pup b/common/dist/zlib/amiga/Makefile.pup new file mode 100644 index 000000000..3f7e15537 --- /dev/null +++ b/common/dist/zlib/amiga/Makefile.pup @@ -0,0 +1,66 @@ +# Amiga powerUP (TM) Makefile +# makefile for libpng and SAS C V6.58/7.00 PPC compiler +# Copyright (C) 1998 by Andreas R. Kleinert + +LIBNAME = libzip.a + +CC = scppc +CFLAGS = NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \ + OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8 NOVER +AR = ppc-amigaos-ar cr +RANLIB = ppc-amigaos-ranlib +LD = ppc-amigaos-ld -r +LDFLAGS = -o +LDLIBS = LIB:scppc.a LIB:end.o +RM = delete quiet + +OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \ + zutil.o inflate.o infback.o inftrees.o inffast.o + +TEST_OBJS = example.o minigzip.o + +all: example minigzip + +check: test +test: all + example + echo hello world | minigzip | minigzip -d + +$(LIBNAME): $(OBJS) + $(AR) $@ $(OBJS) + -$(RANLIB) $@ + +example: example.o $(LIBNAME) + $(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS) + +minigzip: minigzip.o $(LIBNAME) + $(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS) + +mostlyclean: clean +clean: + $(RM) *.o example minigzip $(LIBNAME) foo.gz + +zip: + zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \ + descrip.mms *.[ch] + +tgz: + cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \ + zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch] + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: crc32.h zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +example.o: zlib.h zconf.h +gzio.o: zutil.h zlib.h zconf.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +minigzip.o: zlib.h zconf.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/common/dist/zlib/amiga/Makefile.sas b/common/dist/zlib/amiga/Makefile.sas new file mode 100644 index 000000000..296ef48a2 --- /dev/null +++ b/common/dist/zlib/amiga/Makefile.sas @@ -0,0 +1,65 @@ +# SMakefile for zlib +# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly +# Osma Ahvenlampi +# Amiga, SAS/C 6.56 & Smake + +CC=sc +CFLAGS=OPT +#CFLAGS=OPT CPU=68030 +#CFLAGS=DEBUG=LINE +LDFLAGS=LIB z.lib + +SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \ + NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \ + DEF=POSTINC + +OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \ + zutil.o inflate.o infback.o inftrees.o inffast.o + +TEST_OBJS = example.o minigzip.o + +all: SCOPTIONS example minigzip + +check: test +test: all + example + echo hello world | minigzip | minigzip -d + +install: z.lib + copy clone zlib.h zconf.h INCLUDE: + copy clone z.lib LIB: + +z.lib: $(OBJS) + oml z.lib r $(OBJS) + +example: example.o z.lib + $(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS) + +minigzip: minigzip.o z.lib + $(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS) + +mostlyclean: clean +clean: + -delete force quiet example minigzip *.o z.lib foo.gz *.lnk SCOPTIONS + +SCOPTIONS: Makefile.sas + copy to $@ 64K on 16-bit machine: */ + if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; +#endif + stream.next_out = dest; + stream.avail_out = (uInt)*destLen; + if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; + + stream.zalloc = (alloc_func)0; + stream.zfree = (free_func)0; + stream.opaque = (voidpf)0; + + err = deflateInit(&stream, level); + if (err != Z_OK) return err; + + err = deflate(&stream, Z_FINISH); + if (err != Z_STREAM_END) { + deflateEnd(&stream); + return err == Z_OK ? Z_BUF_ERROR : err; + } + *destLen = stream.total_out; + + err = deflateEnd(&stream); + return err; +} + +/* =========================================================================== + */ +int ZEXPORT compress (dest, destLen, source, sourceLen) + Bytef *dest; + uLongf *destLen; + const Bytef *source; + uLong sourceLen; +{ + return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION); +} + +/* =========================================================================== + If the default memLevel or windowBits for deflateInit() is changed, then + this function needs to be updated. + */ +uLong ZEXPORT compressBound (sourceLen) + uLong sourceLen; +{ + return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11; +} diff --git a/common/dist/zlib/configure b/common/dist/zlib/configure new file mode 100644 index 000000000..d7ffdc345 --- /dev/null +++ b/common/dist/zlib/configure @@ -0,0 +1,459 @@ +#!/bin/sh +# configure script for zlib. This script is needed only if +# you wish to build a shared library and your system supports them, +# of if you need special compiler, flags or install directory. +# Otherwise, you can just use directly "make test; make install" +# +# To create a shared library, use "configure --shared"; by default a static +# library is created. If the primitive shared library support provided here +# does not work, use ftp://prep.ai.mit.edu/pub/gnu/libtool-*.tar.gz +# +# To impose specific compiler or flags or install directory, use for example: +# prefix=$HOME CC=cc CFLAGS="-O4" ./configure +# or for csh/tcsh users: +# (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure) +# LDSHARED is the command to be used to create a shared library + +# Incorrect settings of CC or CFLAGS may prevent creating a shared library. +# If you have problems, try without defining CC and CFLAGS before reporting +# an error. + +LIBS=libz.a +LDFLAGS="-L. ${LIBS}" +VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h` +VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h` +VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h` +AR=${AR-"ar rc"} +RANLIB=${RANLIB-"ranlib"} +prefix=${prefix-/usr/local} +exec_prefix=${exec_prefix-'${prefix}'} +libdir=${libdir-'${exec_prefix}/lib'} +includedir=${includedir-'${prefix}/include'} +mandir=${mandir-'${prefix}/share/man'} +shared_ext='.so' +shared=0 +gcc=0 +old_cc="$CC" +old_cflags="$CFLAGS" + +while test $# -ge 1 +do +case "$1" in + -h* | --h*) + echo 'usage:' + echo ' configure [--shared] [--prefix=PREFIX] [--exec_prefix=EXPREFIX]' + echo ' [--libdir=LIBDIR] [--includedir=INCLUDEDIR]' + exit 0;; + -p*=* | --p*=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;; + -e*=* | --e*=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;; + -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift;; + -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift;; + -p* | --p*) prefix="$2"; shift; shift;; + -e* | --e*) exec_prefix="$2"; shift; shift;; + -l* | --l*) libdir="$2"; shift; shift;; + -i* | --i*) includedir="$2"; shift; shift;; + -s* | --s*) shared=1; shift;; + *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1;; + esac +done + +test=ztest$$ +cat > $test.c </dev/null; then + CC="$cc" + SFLAGS=${CFLAGS-"-fPIC -O3"} + CFLAGS="$cflags" + case `(uname -s || echo unknown) 2>/dev/null` in + Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1"};; + CYGWIN* | Cygwin* | cygwin* | OS/2* ) + EXE='.exe';; + QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4 + # (alain.bonnefoy@icbt.com) + LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"};; + HP-UX*) + LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"} + case `(uname -m || echo unknown) 2>/dev/null` in + ia64) + shared_ext='.so' + SHAREDLIB='libz.so';; + *) + shared_ext='.sl' + SHAREDLIB='libz.sl';; + esac;; + Darwin*) shared_ext='.dylib' + SHAREDLIB=libz$shared_ext + SHAREDLIBV=libz.$VER$shared_ext + SHAREDLIBM=libz.$VER1$shared_ext + LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER"};; + *) LDSHARED=${LDSHARED-"$cc -shared"};; + esac +else + # find system name and corresponding cc options + CC=${CC-cc} + case `(uname -sr || echo unknown) 2>/dev/null` in + HP-UX*) SFLAGS=${CFLAGS-"-O +z"} + CFLAGS=${CFLAGS-"-O"} +# LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"} + LDSHARED=${LDSHARED-"ld -b"} + case `(uname -m || echo unknown) 2>/dev/null` in + ia64) + shared_ext='.so' + SHAREDLIB='libz.so';; + *) + shared_ext='.sl' + SHAREDLIB='libz.sl';; + esac;; + IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."} + CFLAGS=${CFLAGS-"-ansi -O2"} + LDSHARED=${LDSHARED-"cc -shared"};; + OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"} + CFLAGS=${CFLAGS-"-O -std1"} + LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"};; + OSF1*) SFLAGS=${CFLAGS-"-O -std1"} + CFLAGS=${CFLAGS-"-O -std1"} + LDSHARED=${LDSHARED-"cc -shared"};; + QNX*) SFLAGS=${CFLAGS-"-4 -O"} + CFLAGS=${CFLAGS-"-4 -O"} + LDSHARED=${LDSHARED-"cc"} + RANLIB=${RANLIB-"true"} + AR="cc -A";; + SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "} + CFLAGS=${CFLAGS-"-O3"} + LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};; + SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."} + CFLAGS=${CFLAGS-"-fast -xcg89"} + LDSHARED=${LDSHARED-"cc -G"};; + SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"} + CFLAGS=${CFLAGS-"-O2"} + LDSHARED=${LDSHARED-"ld"};; + SunStudio\ 9*) SFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"} + CFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xtarget=ultra3 -xarch=v9b"} + LDSHARED=${LDSHARED-"cc -xarch=v9b"};; + UNIX_System_V\ 4.2.0) + SFLAGS=${CFLAGS-"-KPIC -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"};; + UNIX_SV\ 4.2MP) + SFLAGS=${CFLAGS-"-Kconform_pic -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"};; + OpenUNIX\ 5) + SFLAGS=${CFLAGS-"-KPIC -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"};; + AIX*) # Courtesy of dbakker@arrayasolutions.com + SFLAGS=${CFLAGS-"-O -qmaxmem=8192"} + CFLAGS=${CFLAGS-"-O -qmaxmem=8192"} + LDSHARED=${LDSHARED-"xlc -G"};; + # send working options for other systems to support@gzip.org + *) SFLAGS=${CFLAGS-"-O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -shared"};; + esac +fi + +SHAREDLIB=${SHAREDLIB-"libz$shared_ext"} +SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"} +SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"} + +if test $shared -eq 1; then + echo Checking for shared library support... + # we must test in two steps (cc then ld), required at least on SunOS 4.x + if test "`($CC -c $SFLAGS $test.c) 2>&1`" = "" && + test "`($LDSHARED -o $test$shared_ext $test.o) 2>&1`" = ""; then + CFLAGS="$SFLAGS" + LIBS="$SHAREDLIBV" + echo Building shared library $SHAREDLIBV with $CC. + elif test -z "$old_cc" -a -z "$old_cflags"; then + echo No shared library support. + shared=0; + else + echo 'No shared library support; try without defining CC and CFLAGS' + shared=0; + fi +fi +if test $shared -eq 0; then + LDSHARED="$CC" + echo Building static library $LIBS version $VER with $CC. +else + LDFLAGS="-L. ${SHAREDLIBV}" +fi + +cat > $test.c < +int main() { return 0; } +EOF +if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then + sed < zconf.in.h "/HAVE_UNISTD_H/s%0%1%" > zconf.h + echo "Checking for unistd.h... Yes." +else + cp -p zconf.in.h zconf.h + echo "Checking for unistd.h... No." +fi + +cat > $test.c < +#include +#include "zconf.h" + +int main() +{ +#ifndef STDC + choke me +#endif + + return 0; +} +EOF + +if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then + echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()" + + cat > $test.c < +#include + +int mytest(char *fmt, ...) +{ + char buf[20]; + va_list ap; + + va_start(ap, fmt); + vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + return 0; +} + +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + + if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then + echo "Checking for vsnprintf() in stdio.h... Yes." + + cat >$test.c < +#include + +int mytest(char *fmt, ...) +{ + int n; + char buf[20]; + va_list ap; + + va_start(ap, fmt); + n = vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + return n; +} + +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + + if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then + echo "Checking for return value of vsnprintf()... Yes." + else + CFLAGS="$CFLAGS -DHAS_vsnprintf_void" + echo "Checking for return value of vsnprintf()... No." + echo " WARNING: apparently vsnprintf() does not return a value. zlib" + echo " can build but will be open to possible string-format security" + echo " vulnerabilities." + fi + else + CFLAGS="$CFLAGS -DNO_vsnprintf" + echo "Checking for vsnprintf() in stdio.h... No." + echo " WARNING: vsnprintf() not found, falling back to vsprintf(). zlib" + echo " can build but will be open to possible buffer-overflow security" + echo " vulnerabilities." + + cat >$test.c < +#include + +int mytest(char *fmt, ...) +{ + int n; + char buf[20]; + va_list ap; + + va_start(ap, fmt); + n = vsprintf(buf, fmt, ap); + va_end(ap); + return n; +} + +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + + if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then + echo "Checking for return value of vsprintf()... Yes." + else + CFLAGS="$CFLAGS -DHAS_vsprintf_void" + echo "Checking for return value of vsprintf()... No." + echo " WARNING: apparently vsprintf() does not return a value. zlib" + echo " can build but will be open to possible string-format security" + echo " vulnerabilities." + fi + fi +else + echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()" + + cat >$test.c < + +int mytest() +{ + char buf[20]; + + snprintf(buf, sizeof(buf), "%s", "foo"); + return 0; +} + +int main() +{ + return (mytest()); +} +EOF + + if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then + echo "Checking for snprintf() in stdio.h... Yes." + + cat >$test.c < + +int mytest() +{ + char buf[20]; + + return snprintf(buf, sizeof(buf), "%s", "foo"); +} + +int main() +{ + return (mytest()); +} +EOF + + if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then + echo "Checking for return value of snprintf()... Yes." + else + CFLAGS="$CFLAGS -DHAS_snprintf_void" + echo "Checking for return value of snprintf()... No." + echo " WARNING: apparently snprintf() does not return a value. zlib" + echo " can build but will be open to possible string-format security" + echo " vulnerabilities." + fi + else + CFLAGS="$CFLAGS -DNO_snprintf" + echo "Checking for snprintf() in stdio.h... No." + echo " WARNING: snprintf() not found, falling back to sprintf(). zlib" + echo " can build but will be open to possible buffer-overflow security" + echo " vulnerabilities." + + cat >$test.c < + +int mytest() +{ + char buf[20]; + + return sprintf(buf, "%s", "foo"); +} + +int main() +{ + return (mytest()); +} +EOF + + if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then + echo "Checking for return value of sprintf()... Yes." + else + CFLAGS="$CFLAGS -DHAS_sprintf_void" + echo "Checking for return value of sprintf()... No." + echo " WARNING: apparently sprintf() does not return a value. zlib" + echo " can build but will be open to possible string-format security" + echo " vulnerabilities." + fi + fi +fi + +cat >$test.c < +int main() { return 0; } +EOF +if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then + echo "Checking for errno.h... Yes." +else + echo "Checking for errno.h... No." + CFLAGS="$CFLAGS -DNO_ERRNO_H" +fi + +cat > $test.c < +#include +#include +caddr_t hello() { + return mmap((caddr_t)0, (off_t)0, PROT_READ, MAP_SHARED, 0, (off_t)0); +} +EOF +if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then + CFLAGS="$CFLAGS -DUSE_MMAP" + echo Checking for mmap support... Yes. +else + echo Checking for mmap support... No. +fi + +CPP=${CPP-"$CC -E"} +case $CFLAGS in + *ASMV*) + if test "`nm $test.o | grep _hello`" = ""; then + CPP="$CPP -DNO_UNDERLINE" + echo Checking for underline in external names... No. + else + echo Checking for underline in external names... Yes. + fi;; +esac + +rm -f $test.[co] $test $test$shared_ext + +# udpate Makefile +sed < Makefile.in " +/^CC *=/s#=.*#=$CC# +/^CFLAGS *=/s#=.*#=$CFLAGS# +/^CPP *=/s#=.*#=$CPP# +/^LDSHARED *=/s#=.*#=$LDSHARED# +/^LIBS *=/s#=.*#=$LIBS# +/^SHAREDLIB *=/s#=.*#=$SHAREDLIB# +/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV# +/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM# +/^AR *=/s#=.*#=$AR# +/^RANLIB *=/s#=.*#=$RANLIB# +/^EXE *=/s#=.*#=$EXE# +/^prefix *=/s#=.*#=$prefix# +/^exec_prefix *=/s#=.*#=$exec_prefix# +/^libdir *=/s#=.*#=$libdir# +/^includedir *=/s#=.*#=$includedir# +/^mandir *=/s#=.*#=$mandir# +/^LDFLAGS *=/s#=.*#=$LDFLAGS# +" > Makefile diff --git a/common/dist/zlib/contrib/README.contrib b/common/dist/zlib/contrib/README.contrib new file mode 100644 index 000000000..20afc6215 --- /dev/null +++ b/common/dist/zlib/contrib/README.contrib @@ -0,0 +1,71 @@ +All files under this contrib directory are UNSUPPORTED. There were +provided by users of zlib and were not tested by the authors of zlib. +Use at your own risk. Please contact the authors of the contributions +for help about these, not the zlib authors. Thanks. + + +ada/ by Dmitriy Anisimkov + Support for Ada + See http://zlib-ada.sourceforge.net/ + +asm586/ +asm686/ by Brian Raiter + asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax + See http://www.muppetlabs.com/~breadbox/software/assembly.html + +blast/ by Mark Adler + Decompressor for output of PKWare Data Compression Library (DCL) + +delphi/ by Cosmin Truta + Support for Delphi and C++ Builder + +dotzlib/ by Henrik Ravn + Support for Microsoft .Net and Visual C++ .Net + +infback9/ by Mark Adler + Unsupported diffs to infback to decode the deflate64 format + +inflate86/ by Chris Anderson + Tuned x86 gcc asm code to replace inflate_fast() + +iostream/ by Kevin Ruland + A C++ I/O streams interface to the zlib gz* functions + +iostream2/ by Tyge Løvset + Another C++ I/O streams interface + +iostream3/ by Ludwig Schwardt + and Kevin Ruland + Yet another C++ I/O streams interface + +masm686/ by Dan Higdon + and Chuck Walbourn + asm code for Pentium Pro/PII, using the MASM syntax + +masmx64/ by Gilles Vollant + x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to + replace longest_match() and inflate_fast() + +masmx86/ by Gilles Vollant + x86 asm code to replace longest_match() and inflate_fast(), + for Visual C++ and MASM + +minizip/ by Gilles Vollant + Mini zip and unzip based on zlib + See http://www.winimage.com/zLibDll/unzip.html + +pascal/ by Bob Dellaca et al. + Support for Pascal + +puff/ by Mark Adler + Small, low memory usage inflate. Also serves to provide an + unambiguous description of the deflate format. + +testzlib/ by Gilles Vollant + Example of the use of zlib + +untgz/ by Pedro A. Aranda Gutierrez + A very simple tar.gz file extractor using zlib + +vstudio/ by Gilles Vollant + Building a minizip-enhanced zlib with Microsoft Visual Studio diff --git a/common/dist/zlib/contrib/ada/buffer_demo.adb b/common/dist/zlib/contrib/ada/buffer_demo.adb new file mode 100644 index 000000000..3246d4527 --- /dev/null +++ b/common/dist/zlib/contrib/ada/buffer_demo.adb @@ -0,0 +1,106 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2004 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- +-- +-- Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp + +-- This demo program provided by Dr Steve Sangwine +-- +-- Demonstration of a problem with Zlib-Ada (already fixed) when a buffer +-- of exactly the correct size is used for decompressed data, and the last +-- few bytes passed in to Zlib are checksum bytes. + +-- This program compresses a string of text, and then decompresses the +-- compressed text into a buffer of the same size as the original text. + +with Ada.Streams; use Ada.Streams; +with Ada.Text_IO; + +with ZLib; use ZLib; + +procedure Buffer_Demo is + EOL : Character renames ASCII.LF; + Text : constant String + := "Four score and seven years ago our fathers brought forth," & EOL & + "upon this continent, a new nation, conceived in liberty," & EOL & + "and dedicated to the proposition that `all men are created equal'."; + + Source : Stream_Element_Array (1 .. Text'Length); + for Source'Address use Text'Address; + +begin + Ada.Text_IO.Put (Text); + Ada.Text_IO.New_Line; + Ada.Text_IO.Put_Line + ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes"); + + declare + Compressed_Data : Stream_Element_Array (1 .. Text'Length); + L : Stream_Element_Offset; + begin + Compress : declare + Compressor : Filter_Type; + I : Stream_Element_Offset; + begin + Deflate_Init (Compressor); + + -- Compress the whole of T at once. + + Translate (Compressor, Source, I, Compressed_Data, L, Finish); + pragma Assert (I = Source'Last); + + Close (Compressor); + + Ada.Text_IO.Put_Line + ("Compressed size : " + & Stream_Element_Offset'Image (L) & " bytes"); + end Compress; + + -- Now we decompress the data, passing short blocks of data to Zlib + -- (because this demonstrates the problem - the last block passed will + -- contain checksum information and there will be no output, only a + -- check inside Zlib that the checksum is correct). + + Decompress : declare + Decompressor : Filter_Type; + + Uncompressed_Data : Stream_Element_Array (1 .. Text'Length); + + Block_Size : constant := 4; + -- This makes sure that the last block contains + -- only Adler checksum data. + + P : Stream_Element_Offset := Compressed_Data'First - 1; + O : Stream_Element_Offset; + begin + Inflate_Init (Decompressor); + + loop + Translate + (Decompressor, + Compressed_Data + (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)), + P, + Uncompressed_Data + (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last), + O, + No_Flush); + + Ada.Text_IO.Put_Line + ("Total in : " & Count'Image (Total_In (Decompressor)) & + ", out : " & Count'Image (Total_Out (Decompressor))); + + exit when P = L; + end loop; + + Ada.Text_IO.New_Line; + Ada.Text_IO.Put_Line + ("Decompressed text matches original text : " + & Boolean'Image (Uncompressed_Data = Source)); + end Decompress; + end; +end Buffer_Demo; diff --git a/common/dist/zlib/contrib/ada/mtest.adb b/common/dist/zlib/contrib/ada/mtest.adb new file mode 100644 index 000000000..e9470c0be --- /dev/null +++ b/common/dist/zlib/contrib/ada/mtest.adb @@ -0,0 +1,156 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- +-- Continuous test for ZLib multithreading. If the test would fail +-- we should provide thread safe allocation routines for the Z_Stream. +-- +-- Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp + +with ZLib; +with Ada.Streams; +with Ada.Numerics.Discrete_Random; +with Ada.Text_IO; +with Ada.Exceptions; +with Ada.Task_Identification; + +procedure MTest is + use Ada.Streams; + use ZLib; + + Stop : Boolean := False; + + pragma Atomic (Stop); + + subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#; + + package Random_Elements is + new Ada.Numerics.Discrete_Random (Visible_Symbols); + + task type Test_Task; + + task body Test_Task is + Buffer : Stream_Element_Array (1 .. 100_000); + Gen : Random_Elements.Generator; + + Buffer_First : Stream_Element_Offset; + Compare_First : Stream_Element_Offset; + + Deflate : Filter_Type; + Inflate : Filter_Type; + + procedure Further (Item : in Stream_Element_Array); + + procedure Read_Buffer + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + + ------------- + -- Further -- + ------------- + + procedure Further (Item : in Stream_Element_Array) is + + procedure Compare (Item : in Stream_Element_Array); + + ------------- + -- Compare -- + ------------- + + procedure Compare (Item : in Stream_Element_Array) is + Next_First : Stream_Element_Offset := Compare_First + Item'Length; + begin + if Buffer (Compare_First .. Next_First - 1) /= Item then + raise Program_Error; + end if; + + Compare_First := Next_First; + end Compare; + + procedure Compare_Write is new ZLib.Write (Write => Compare); + begin + Compare_Write (Inflate, Item, No_Flush); + end Further; + + ----------------- + -- Read_Buffer -- + ----------------- + + procedure Read_Buffer + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset) + is + Buff_Diff : Stream_Element_Offset := Buffer'Last - Buffer_First; + Next_First : Stream_Element_Offset; + begin + if Item'Length <= Buff_Diff then + Last := Item'Last; + + Next_First := Buffer_First + Item'Length; + + Item := Buffer (Buffer_First .. Next_First - 1); + + Buffer_First := Next_First; + else + Last := Item'First + Buff_Diff; + Item (Item'First .. Last) := Buffer (Buffer_First .. Buffer'Last); + Buffer_First := Buffer'Last + 1; + end if; + end Read_Buffer; + + procedure Translate is new Generic_Translate + (Data_In => Read_Buffer, + Data_Out => Further); + + begin + Random_Elements.Reset (Gen); + + Buffer := (others => 20); + + Main : loop + for J in Buffer'Range loop + Buffer (J) := Random_Elements.Random (Gen); + + Deflate_Init (Deflate); + Inflate_Init (Inflate); + + Buffer_First := Buffer'First; + Compare_First := Buffer'First; + + Translate (Deflate); + + if Compare_First /= Buffer'Last + 1 then + raise Program_Error; + end if; + + Ada.Text_IO.Put_Line + (Ada.Task_Identification.Image + (Ada.Task_Identification.Current_Task) + & Stream_Element_Offset'Image (J) + & ZLib.Count'Image (Total_Out (Deflate))); + + Close (Deflate); + Close (Inflate); + + exit Main when Stop; + end loop; + end loop Main; + exception + when E : others => + Ada.Text_IO.Put_Line (Ada.Exceptions.Exception_Information (E)); + Stop := True; + end Test_Task; + + Test : array (1 .. 4) of Test_Task; + + pragma Unreferenced (Test); + + Dummy : Character; + +begin + Ada.Text_IO.Get_Immediate (Dummy); + Stop := True; +end MTest; diff --git a/common/dist/zlib/contrib/ada/read.adb b/common/dist/zlib/contrib/ada/read.adb new file mode 100644 index 000000000..909a62390 --- /dev/null +++ b/common/dist/zlib/contrib/ada/read.adb @@ -0,0 +1,156 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- Id: read.adb,v 1.8 2004/05/31 10:53:40 vagul Exp + +-- Test/demo program for the generic read interface. + +with Ada.Numerics.Discrete_Random; +with Ada.Streams; +with Ada.Text_IO; + +with ZLib; + +procedure Read is + + use Ada.Streams; + + ------------------------------------ + -- Test configuration parameters -- + ------------------------------------ + + File_Size : Stream_Element_Offset := 100_000; + + Continuous : constant Boolean := False; + -- If this constant is True, the test would be repeated again and again, + -- with increment File_Size for every iteration. + + Header : constant ZLib.Header_Type := ZLib.Default; + -- Do not use Header other than Default in ZLib versions 1.1.4 and older. + + Init_Random : constant := 8; + -- We are using the same random sequence, in case of we catch bug, + -- so we would be able to reproduce it. + + -- End -- + + Pack_Size : Stream_Element_Offset; + Offset : Stream_Element_Offset; + + Filter : ZLib.Filter_Type; + + subtype Visible_Symbols + is Stream_Element range 16#20# .. 16#7E#; + + package Random_Elements is new + Ada.Numerics.Discrete_Random (Visible_Symbols); + + Gen : Random_Elements.Generator; + Period : constant Stream_Element_Offset := 200; + -- Period constant variable for random generator not to be very random. + -- Bigger period, harder random. + + Read_Buffer : Stream_Element_Array (1 .. 2048); + Read_First : Stream_Element_Offset; + Read_Last : Stream_Element_Offset; + + procedure Reset; + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset); + -- this procedure is for generic instantiation of + -- ZLib.Read + -- reading data from the File_In. + + procedure Read is new ZLib.Read + (Read, + Read_Buffer, + Rest_First => Read_First, + Rest_Last => Read_Last); + + ---------- + -- Read -- + ---------- + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) is + begin + Last := Stream_Element_Offset'Min + (Item'Last, + Item'First + File_Size - Offset); + + for J in Item'First .. Last loop + if J < Item'First + Period then + Item (J) := Random_Elements.Random (Gen); + else + Item (J) := Item (J - Period); + end if; + + Offset := Offset + 1; + end loop; + end Read; + + ----------- + -- Reset -- + ----------- + + procedure Reset is + begin + Random_Elements.Reset (Gen, Init_Random); + Pack_Size := 0; + Offset := 1; + Read_First := Read_Buffer'Last + 1; + Read_Last := Read_Buffer'Last; + end Reset; + +begin + Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version); + + loop + for Level in ZLib.Compression_Level'Range loop + + Ada.Text_IO.Put ("Level =" + & ZLib.Compression_Level'Image (Level)); + + -- Deflate using generic instantiation. + + ZLib.Deflate_Init + (Filter, + Level, + Header => Header); + + Reset; + + Ada.Text_IO.Put + (Stream_Element_Offset'Image (File_Size) & " ->"); + + loop + declare + Buffer : Stream_Element_Array (1 .. 1024); + Last : Stream_Element_Offset; + begin + Read (Filter, Buffer, Last); + + Pack_Size := Pack_Size + Last - Buffer'First + 1; + + exit when Last < Buffer'Last; + end; + end loop; + + Ada.Text_IO.Put_Line (Stream_Element_Offset'Image (Pack_Size)); + + ZLib.Close (Filter); + end loop; + + exit when not Continuous; + + File_Size := File_Size + 1; + end loop; +end Read; diff --git a/common/dist/zlib/contrib/ada/readme.txt b/common/dist/zlib/contrib/ada/readme.txt new file mode 100644 index 000000000..ce4d2cadf --- /dev/null +++ b/common/dist/zlib/contrib/ada/readme.txt @@ -0,0 +1,65 @@ + ZLib for Ada thick binding (ZLib.Ada) + Release 1.3 + +ZLib.Ada is a thick binding interface to the popular ZLib data +compression library, available at http://www.gzip.org/zlib/. +It provides Ada-style access to the ZLib C library. + + + Here are the main changes since ZLib.Ada 1.2: + +- Attension: ZLib.Read generic routine have a initialization requirement + for Read_Last parameter now. It is a bit incompartible with previous version, + but extends functionality, we could use new parameters Allow_Read_Some and + Flush now. + +- Added Is_Open routines to ZLib and ZLib.Streams packages. + +- Add pragma Assert to check Stream_Element is 8 bit. + +- Fix extraction to buffer with exact known decompressed size. Error reported by + Steve Sangwine. + +- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits + computers. Patch provided by Pascal Obry. + +- Add Status_Error exception definition. + +- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit. + + + How to build ZLib.Ada under GNAT + +You should have the ZLib library already build on your computer, before +building ZLib.Ada. Make the directory of ZLib.Ada sources current and +issue the command: + + gnatmake test -largs -L -lz + +Or use the GNAT project file build for GNAT 3.15 or later: + + gnatmake -Pzlib.gpr -L + + + How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2 + +1. Make a project with all *.ads and *.adb files from the distribution. +2. Build the libz.a library from the ZLib C sources. +3. Rename libz.a to z.lib. +4. Add the library z.lib to the project. +5. Add the libc.lib library from the ObjectAda distribution to the project. +6. Build the executable using test.adb as a main procedure. + + + How to use ZLib.Ada + +The source files test.adb and read.adb are small demo programs that show +the main functionality of ZLib.Ada. + +The routines from the package specifications are commented. + + +Homepage: http://zlib-ada.sourceforge.net/ +Author: Dmitriy Anisimkov + +Contributors: Pascal Obry , Steve Sangwine diff --git a/common/dist/zlib/contrib/ada/test.adb b/common/dist/zlib/contrib/ada/test.adb new file mode 100644 index 000000000..d2301bad9 --- /dev/null +++ b/common/dist/zlib/contrib/ada/test.adb @@ -0,0 +1,463 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- Id: test.adb,v 1.17 2003/08/12 12:13:30 vagul Exp + +-- The program has a few aims. +-- 1. Test ZLib.Ada95 thick binding functionality. +-- 2. Show the example of use main functionality of the ZLib.Ada95 binding. +-- 3. Build this program automatically compile all ZLib.Ada95 packages under +-- GNAT Ada95 compiler. + +with ZLib.Streams; +with Ada.Streams.Stream_IO; +with Ada.Numerics.Discrete_Random; + +with Ada.Text_IO; + +with Ada.Calendar; + +procedure Test is + + use Ada.Streams; + use Stream_IO; + + ------------------------------------ + -- Test configuration parameters -- + ------------------------------------ + + File_Size : Count := 100_000; + Continuous : constant Boolean := False; + + Header : constant ZLib.Header_Type := ZLib.Default; + -- ZLib.None; + -- ZLib.Auto; + -- ZLib.GZip; + -- Do not use Header other then Default in ZLib versions 1.1.4 + -- and older. + + Strategy : constant ZLib.Strategy_Type := ZLib.Default_Strategy; + Init_Random : constant := 10; + + -- End -- + + In_File_Name : constant String := "testzlib.in"; + -- Name of the input file + + Z_File_Name : constant String := "testzlib.zlb"; + -- Name of the compressed file. + + Out_File_Name : constant String := "testzlib.out"; + -- Name of the decompressed file. + + File_In : File_Type; + File_Out : File_Type; + File_Back : File_Type; + File_Z : ZLib.Streams.Stream_Type; + + Filter : ZLib.Filter_Type; + + Time_Stamp : Ada.Calendar.Time; + + procedure Generate_File; + -- Generate file of spetsified size with some random data. + -- The random data is repeatable, for the good compression. + + procedure Compare_Streams + (Left, Right : in out Root_Stream_Type'Class); + -- The procedure compearing data in 2 streams. + -- It is for compare data before and after compression/decompression. + + procedure Compare_Files (Left, Right : String); + -- Compare files. Based on the Compare_Streams. + + procedure Copy_Streams + (Source, Target : in out Root_Stream_Type'Class; + Buffer_Size : in Stream_Element_Offset := 1024); + -- Copying data from one stream to another. It is for test stream + -- interface of the library. + + procedure Data_In + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset); + -- this procedure is for generic instantiation of + -- ZLib.Generic_Translate. + -- reading data from the File_In. + + procedure Data_Out (Item : in Stream_Element_Array); + -- this procedure is for generic instantiation of + -- ZLib.Generic_Translate. + -- writing data to the File_Out. + + procedure Stamp; + -- Store the timestamp to the local variable. + + procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count); + -- Print the time statistic with the message. + + procedure Translate is new ZLib.Generic_Translate + (Data_In => Data_In, + Data_Out => Data_Out); + -- This procedure is moving data from File_In to File_Out + -- with compression or decompression, depend on initialization of + -- Filter parameter. + + ------------------- + -- Compare_Files -- + ------------------- + + procedure Compare_Files (Left, Right : String) is + Left_File, Right_File : File_Type; + begin + Open (Left_File, In_File, Left); + Open (Right_File, In_File, Right); + Compare_Streams (Stream (Left_File).all, Stream (Right_File).all); + Close (Left_File); + Close (Right_File); + end Compare_Files; + + --------------------- + -- Compare_Streams -- + --------------------- + + procedure Compare_Streams + (Left, Right : in out Ada.Streams.Root_Stream_Type'Class) + is + Left_Buffer, Right_Buffer : Stream_Element_Array (0 .. 16#FFF#); + Left_Last, Right_Last : Stream_Element_Offset; + begin + loop + Read (Left, Left_Buffer, Left_Last); + Read (Right, Right_Buffer, Right_Last); + + if Left_Last /= Right_Last then + Ada.Text_IO.Put_Line ("Compare error :" + & Stream_Element_Offset'Image (Left_Last) + & " /= " + & Stream_Element_Offset'Image (Right_Last)); + + raise Constraint_Error; + + elsif Left_Buffer (0 .. Left_Last) + /= Right_Buffer (0 .. Right_Last) + then + Ada.Text_IO.Put_Line ("ERROR: IN and OUT files is not equal."); + raise Constraint_Error; + + end if; + + exit when Left_Last < Left_Buffer'Last; + end loop; + end Compare_Streams; + + ------------------ + -- Copy_Streams -- + ------------------ + + procedure Copy_Streams + (Source, Target : in out Ada.Streams.Root_Stream_Type'Class; + Buffer_Size : in Stream_Element_Offset := 1024) + is + Buffer : Stream_Element_Array (1 .. Buffer_Size); + Last : Stream_Element_Offset; + begin + loop + Read (Source, Buffer, Last); + Write (Target, Buffer (1 .. Last)); + + exit when Last < Buffer'Last; + end loop; + end Copy_Streams; + + ------------- + -- Data_In -- + ------------- + + procedure Data_In + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) is + begin + Read (File_In, Item, Last); + end Data_In; + + -------------- + -- Data_Out -- + -------------- + + procedure Data_Out (Item : in Stream_Element_Array) is + begin + Write (File_Out, Item); + end Data_Out; + + ------------------- + -- Generate_File -- + ------------------- + + procedure Generate_File is + subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#; + + package Random_Elements is + new Ada.Numerics.Discrete_Random (Visible_Symbols); + + Gen : Random_Elements.Generator; + Buffer : Stream_Element_Array := (1 .. 77 => 16#20#) & 10; + + Buffer_Count : constant Count := File_Size / Buffer'Length; + -- Number of same buffers in the packet. + + Density : constant Count := 30; -- from 0 to Buffer'Length - 2; + + procedure Fill_Buffer (J, D : in Count); + -- Change the part of the buffer. + + ----------------- + -- Fill_Buffer -- + ----------------- + + procedure Fill_Buffer (J, D : in Count) is + begin + for K in 0 .. D loop + Buffer + (Stream_Element_Offset ((J + K) mod (Buffer'Length - 1) + 1)) + := Random_Elements.Random (Gen); + + end loop; + end Fill_Buffer; + + begin + Random_Elements.Reset (Gen, Init_Random); + + Create (File_In, Out_File, In_File_Name); + + Fill_Buffer (1, Buffer'Length - 2); + + for J in 1 .. Buffer_Count loop + Write (File_In, Buffer); + + Fill_Buffer (J, Density); + end loop; + + -- fill remain size. + + Write + (File_In, + Buffer + (1 .. Stream_Element_Offset + (File_Size - Buffer'Length * Buffer_Count))); + + Flush (File_In); + Close (File_In); + end Generate_File; + + --------------------- + -- Print_Statistic -- + --------------------- + + procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count) is + use Ada.Calendar; + use Ada.Text_IO; + + package Count_IO is new Integer_IO (ZLib.Count); + + Curr_Dur : Duration := Clock - Time_Stamp; + begin + Put (Msg); + + Set_Col (20); + Ada.Text_IO.Put ("size ="); + + Count_IO.Put + (Data_Size, + Width => Stream_IO.Count'Image (File_Size)'Length); + + Put_Line (" duration =" & Duration'Image (Curr_Dur)); + end Print_Statistic; + + ----------- + -- Stamp -- + ----------- + + procedure Stamp is + begin + Time_Stamp := Ada.Calendar.Clock; + end Stamp; + +begin + Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version); + + loop + Generate_File; + + for Level in ZLib.Compression_Level'Range loop + + Ada.Text_IO.Put_Line ("Level =" + & ZLib.Compression_Level'Image (Level)); + + -- Test generic interface. + Open (File_In, In_File, In_File_Name); + Create (File_Out, Out_File, Z_File_Name); + + Stamp; + + -- Deflate using generic instantiation. + + ZLib.Deflate_Init + (Filter => Filter, + Level => Level, + Strategy => Strategy, + Header => Header); + + Translate (Filter); + Print_Statistic ("Generic compress", ZLib.Total_Out (Filter)); + ZLib.Close (Filter); + + Close (File_In); + Close (File_Out); + + Open (File_In, In_File, Z_File_Name); + Create (File_Out, Out_File, Out_File_Name); + + Stamp; + + -- Inflate using generic instantiation. + + ZLib.Inflate_Init (Filter, Header => Header); + + Translate (Filter); + Print_Statistic ("Generic decompress", ZLib.Total_Out (Filter)); + + ZLib.Close (Filter); + + Close (File_In); + Close (File_Out); + + Compare_Files (In_File_Name, Out_File_Name); + + -- Test stream interface. + + -- Compress to the back stream. + + Open (File_In, In_File, In_File_Name); + Create (File_Back, Out_File, Z_File_Name); + + Stamp; + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.Out_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => True, + Level => Level, + Strategy => Strategy, + Header => Header); + + Copy_Streams + (Source => Stream (File_In).all, + Target => File_Z); + + -- Flushing internal buffers to the back stream. + + ZLib.Streams.Flush (File_Z, ZLib.Finish); + + Print_Statistic ("Write compress", + ZLib.Streams.Write_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + + Close (File_In); + Close (File_Back); + + -- Compare reading from original file and from + -- decompression stream. + + Open (File_In, In_File, In_File_Name); + Open (File_Back, In_File, Z_File_Name); + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.In_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => True, + Header => Header); + + Stamp; + Compare_Streams (Stream (File_In).all, File_Z); + + Print_Statistic ("Read decompress", + ZLib.Streams.Read_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + Close (File_In); + Close (File_Back); + + -- Compress by reading from compression stream. + + Open (File_Back, In_File, In_File_Name); + Create (File_Out, Out_File, Z_File_Name); + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.In_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => False, + Level => Level, + Strategy => Strategy, + Header => Header); + + Stamp; + Copy_Streams + (Source => File_Z, + Target => Stream (File_Out).all); + + Print_Statistic ("Read compress", + ZLib.Streams.Read_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + + Close (File_Out); + Close (File_Back); + + -- Decompress to decompression stream. + + Open (File_In, In_File, Z_File_Name); + Create (File_Back, Out_File, Out_File_Name); + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.Out_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => False, + Header => Header); + + Stamp; + + Copy_Streams + (Source => Stream (File_In).all, + Target => File_Z); + + Print_Statistic ("Write decompress", + ZLib.Streams.Write_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + Close (File_In); + Close (File_Back); + + Compare_Files (In_File_Name, Out_File_Name); + end loop; + + Ada.Text_IO.Put_Line (Count'Image (File_Size) & " Ok."); + + exit when not Continuous; + + File_Size := File_Size + 1; + end loop; +end Test; diff --git a/common/dist/zlib/contrib/ada/zlib-streams.adb b/common/dist/zlib/contrib/ada/zlib-streams.adb new file mode 100644 index 000000000..877440339 --- /dev/null +++ b/common/dist/zlib/contrib/ada/zlib-streams.adb @@ -0,0 +1,225 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- Id: zlib-streams.adb,v 1.10 2004/05/31 10:53:40 vagul Exp + +with Ada.Unchecked_Deallocation; + +package body ZLib.Streams is + + ----------- + -- Close -- + ----------- + + procedure Close (Stream : in out Stream_Type) is + procedure Free is new Ada.Unchecked_Deallocation + (Stream_Element_Array, Buffer_Access); + begin + if Stream.Mode = Out_Stream or Stream.Mode = Duplex then + -- We should flush the data written by the writer. + + Flush (Stream, Finish); + + Close (Stream.Writer); + end if; + + if Stream.Mode = In_Stream or Stream.Mode = Duplex then + Close (Stream.Reader); + Free (Stream.Buffer); + end if; + end Close; + + ------------ + -- Create -- + ------------ + + procedure Create + (Stream : out Stream_Type; + Mode : in Stream_Mode; + Back : in Stream_Access; + Back_Compressed : in Boolean; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Header : in Header_Type := Default; + Read_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size; + Write_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size) + is + + subtype Buffer_Subtype is Stream_Element_Array (1 .. Read_Buffer_Size); + + procedure Init_Filter + (Filter : in out Filter_Type; + Compress : in Boolean); + + ----------------- + -- Init_Filter -- + ----------------- + + procedure Init_Filter + (Filter : in out Filter_Type; + Compress : in Boolean) is + begin + if Compress then + Deflate_Init + (Filter, Level, Strategy, Header => Header); + else + Inflate_Init (Filter, Header => Header); + end if; + end Init_Filter; + + begin + Stream.Back := Back; + Stream.Mode := Mode; + + if Mode = Out_Stream or Mode = Duplex then + Init_Filter (Stream.Writer, Back_Compressed); + Stream.Buffer_Size := Write_Buffer_Size; + else + Stream.Buffer_Size := 0; + end if; + + if Mode = In_Stream or Mode = Duplex then + Init_Filter (Stream.Reader, not Back_Compressed); + + Stream.Buffer := new Buffer_Subtype; + Stream.Rest_First := Stream.Buffer'Last + 1; + Stream.Rest_Last := Stream.Buffer'Last; + end if; + end Create; + + ----------- + -- Flush -- + ----------- + + procedure Flush + (Stream : in out Stream_Type; + Mode : in Flush_Mode := Sync_Flush) + is + Buffer : Stream_Element_Array (1 .. Stream.Buffer_Size); + Last : Stream_Element_Offset; + begin + loop + Flush (Stream.Writer, Buffer, Last, Mode); + + Ada.Streams.Write (Stream.Back.all, Buffer (1 .. Last)); + + exit when Last < Buffer'Last; + end loop; + end Flush; + + ------------- + -- Is_Open -- + ------------- + + function Is_Open (Stream : Stream_Type) return Boolean is + begin + return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer); + end Is_Open; + + ---------- + -- Read -- + ---------- + + procedure Read + (Stream : in out Stream_Type; + Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) + is + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset); + + ---------- + -- Read -- + ---------- + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) is + begin + Ada.Streams.Read (Stream.Back.all, Item, Last); + end Read; + + procedure Read is new ZLib.Read + (Read => Read, + Buffer => Stream.Buffer.all, + Rest_First => Stream.Rest_First, + Rest_Last => Stream.Rest_Last); + + begin + Read (Stream.Reader, Item, Last); + end Read; + + ------------------- + -- Read_Total_In -- + ------------------- + + function Read_Total_In (Stream : in Stream_Type) return Count is + begin + return Total_In (Stream.Reader); + end Read_Total_In; + + -------------------- + -- Read_Total_Out -- + -------------------- + + function Read_Total_Out (Stream : in Stream_Type) return Count is + begin + return Total_Out (Stream.Reader); + end Read_Total_Out; + + ----------- + -- Write -- + ----------- + + procedure Write + (Stream : in out Stream_Type; + Item : in Stream_Element_Array) + is + + procedure Write (Item : in Stream_Element_Array); + + ----------- + -- Write -- + ----------- + + procedure Write (Item : in Stream_Element_Array) is + begin + Ada.Streams.Write (Stream.Back.all, Item); + end Write; + + procedure Write is new ZLib.Write + (Write => Write, + Buffer_Size => Stream.Buffer_Size); + + begin + Write (Stream.Writer, Item, No_Flush); + end Write; + + -------------------- + -- Write_Total_In -- + -------------------- + + function Write_Total_In (Stream : in Stream_Type) return Count is + begin + return Total_In (Stream.Writer); + end Write_Total_In; + + --------------------- + -- Write_Total_Out -- + --------------------- + + function Write_Total_Out (Stream : in Stream_Type) return Count is + begin + return Total_Out (Stream.Writer); + end Write_Total_Out; + +end ZLib.Streams; diff --git a/common/dist/zlib/contrib/ada/zlib-streams.ads b/common/dist/zlib/contrib/ada/zlib-streams.ads new file mode 100644 index 000000000..b2e700360 --- /dev/null +++ b/common/dist/zlib/contrib/ada/zlib-streams.ads @@ -0,0 +1,114 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- Id: zlib-streams.ads,v 1.12 2004/05/31 10:53:40 vagul Exp + +package ZLib.Streams is + + type Stream_Mode is (In_Stream, Out_Stream, Duplex); + + type Stream_Access is access all Ada.Streams.Root_Stream_Type'Class; + + type Stream_Type is + new Ada.Streams.Root_Stream_Type with private; + + procedure Read + (Stream : in out Stream_Type; + Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + + procedure Write + (Stream : in out Stream_Type; + Item : in Ada.Streams.Stream_Element_Array); + + procedure Flush + (Stream : in out Stream_Type; + Mode : in Flush_Mode := Sync_Flush); + -- Flush the written data to the back stream, + -- all data placed to the compressor is flushing to the Back stream. + -- Should not be used untill necessary, becouse it is decreasing + -- compression. + + function Read_Total_In (Stream : in Stream_Type) return Count; + pragma Inline (Read_Total_In); + -- Return total number of bytes read from back stream so far. + + function Read_Total_Out (Stream : in Stream_Type) return Count; + pragma Inline (Read_Total_Out); + -- Return total number of bytes read so far. + + function Write_Total_In (Stream : in Stream_Type) return Count; + pragma Inline (Write_Total_In); + -- Return total number of bytes written so far. + + function Write_Total_Out (Stream : in Stream_Type) return Count; + pragma Inline (Write_Total_Out); + -- Return total number of bytes written to the back stream. + + procedure Create + (Stream : out Stream_Type; + Mode : in Stream_Mode; + Back : in Stream_Access; + Back_Compressed : in Boolean; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Header : in Header_Type := Default; + Read_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size; + Write_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size); + -- Create the Comression/Decompression stream. + -- If mode is In_Stream then Write operation is disabled. + -- If mode is Out_Stream then Read operation is disabled. + + -- If Back_Compressed is true then + -- Data written to the Stream is compressing to the Back stream + -- and data read from the Stream is decompressed data from the Back stream. + + -- If Back_Compressed is false then + -- Data written to the Stream is decompressing to the Back stream + -- and data read from the Stream is compressed data from the Back stream. + + -- !!! When the Need_Header is False ZLib-Ada is using undocumented + -- ZLib 1.1.4 functionality to do not create/wait for ZLib headers. + + function Is_Open (Stream : Stream_Type) return Boolean; + + procedure Close (Stream : in out Stream_Type); + +private + + use Ada.Streams; + + type Buffer_Access is access all Stream_Element_Array; + + type Stream_Type + is new Root_Stream_Type with + record + Mode : Stream_Mode; + + Buffer : Buffer_Access; + Rest_First : Stream_Element_Offset; + Rest_Last : Stream_Element_Offset; + -- Buffer for Read operation. + -- We need to have this buffer in the record + -- becouse not all read data from back stream + -- could be processed during the read operation. + + Buffer_Size : Stream_Element_Offset; + -- Buffer size for write operation. + -- We do not need to have this buffer + -- in the record becouse all data could be + -- processed in the write operation. + + Back : Stream_Access; + Reader : Filter_Type; + Writer : Filter_Type; + end record; + +end ZLib.Streams; diff --git a/common/dist/zlib/contrib/ada/zlib-thin.adb b/common/dist/zlib/contrib/ada/zlib-thin.adb new file mode 100644 index 000000000..187c099c8 --- /dev/null +++ b/common/dist/zlib/contrib/ada/zlib-thin.adb @@ -0,0 +1,141 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- Id: zlib-thin.adb,v 1.8 2003/12/14 18:27:31 vagul Exp + +package body ZLib.Thin is + + ZLIB_VERSION : constant Chars_Ptr := zlibVersion; + + Z_Stream_Size : constant Int := Z_Stream'Size / System.Storage_Unit; + + -------------- + -- Avail_In -- + -------------- + + function Avail_In (Strm : in Z_Stream) return UInt is + begin + return Strm.Avail_In; + end Avail_In; + + --------------- + -- Avail_Out -- + --------------- + + function Avail_Out (Strm : in Z_Stream) return UInt is + begin + return Strm.Avail_Out; + end Avail_Out; + + ------------------ + -- Deflate_Init -- + ------------------ + + function Deflate_Init + (strm : Z_Streamp; + level : Int; + method : Int; + windowBits : Int; + memLevel : Int; + strategy : Int) + return Int is + begin + return deflateInit2 + (strm, + level, + method, + windowBits, + memLevel, + strategy, + ZLIB_VERSION, + Z_Stream_Size); + end Deflate_Init; + + ------------------ + -- Inflate_Init -- + ------------------ + + function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int is + begin + return inflateInit2 (strm, windowBits, ZLIB_VERSION, Z_Stream_Size); + end Inflate_Init; + + ------------------------ + -- Last_Error_Message -- + ------------------------ + + function Last_Error_Message (Strm : in Z_Stream) return String is + use Interfaces.C.Strings; + begin + if Strm.msg = Null_Ptr then + return ""; + else + return Value (Strm.msg); + end if; + end Last_Error_Message; + + ------------ + -- Set_In -- + ------------ + + procedure Set_In + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt) is + begin + Strm.Next_In := Buffer; + Strm.Avail_In := Size; + end Set_In; + + ------------------ + -- Set_Mem_Func -- + ------------------ + + procedure Set_Mem_Func + (Strm : in out Z_Stream; + Opaque : in Voidp; + Alloc : in alloc_func; + Free : in free_func) is + begin + Strm.opaque := Opaque; + Strm.zalloc := Alloc; + Strm.zfree := Free; + end Set_Mem_Func; + + ------------- + -- Set_Out -- + ------------- + + procedure Set_Out + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt) is + begin + Strm.Next_Out := Buffer; + Strm.Avail_Out := Size; + end Set_Out; + + -------------- + -- Total_In -- + -------------- + + function Total_In (Strm : in Z_Stream) return ULong is + begin + return Strm.Total_In; + end Total_In; + + --------------- + -- Total_Out -- + --------------- + + function Total_Out (Strm : in Z_Stream) return ULong is + begin + return Strm.Total_Out; + end Total_Out; + +end ZLib.Thin; diff --git a/common/dist/zlib/contrib/ada/zlib-thin.ads b/common/dist/zlib/contrib/ada/zlib-thin.ads new file mode 100644 index 000000000..8e4ab02ef --- /dev/null +++ b/common/dist/zlib/contrib/ada/zlib-thin.ads @@ -0,0 +1,450 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- Id: zlib-thin.ads,v 1.11 2004/07/23 06:33:11 vagul Exp + +with Interfaces.C.Strings; + +with System; + +private package ZLib.Thin is + + -- From zconf.h + + MAX_MEM_LEVEL : constant := 9; -- zconf.h:105 + -- zconf.h:105 + MAX_WBITS : constant := 15; -- zconf.h:115 + -- 32K LZ77 window + -- zconf.h:115 + SEEK_SET : constant := 8#0000#; -- zconf.h:244 + -- Seek from beginning of file. + -- zconf.h:244 + SEEK_CUR : constant := 1; -- zconf.h:245 + -- Seek from current position. + -- zconf.h:245 + SEEK_END : constant := 2; -- zconf.h:246 + -- Set file pointer to EOF plus "offset" + -- zconf.h:246 + + type Byte is new Interfaces.C.unsigned_char; -- 8 bits + -- zconf.h:214 + type UInt is new Interfaces.C.unsigned; -- 16 bits or more + -- zconf.h:216 + type Int is new Interfaces.C.int; + + type ULong is new Interfaces.C.unsigned_long; -- 32 bits or more + -- zconf.h:217 + subtype Chars_Ptr is Interfaces.C.Strings.chars_ptr; + + type ULong_Access is access ULong; + type Int_Access is access Int; + + subtype Voidp is System.Address; -- zconf.h:232 + + subtype Byte_Access is Voidp; + + Nul : constant Voidp := System.Null_Address; + -- end from zconf + + Z_NO_FLUSH : constant := 8#0000#; -- zlib.h:125 + -- zlib.h:125 + Z_PARTIAL_FLUSH : constant := 1; -- zlib.h:126 + -- will be removed, use + -- Z_SYNC_FLUSH instead + -- zlib.h:126 + Z_SYNC_FLUSH : constant := 2; -- zlib.h:127 + -- zlib.h:127 + Z_FULL_FLUSH : constant := 3; -- zlib.h:128 + -- zlib.h:128 + Z_FINISH : constant := 4; -- zlib.h:129 + -- zlib.h:129 + Z_OK : constant := 8#0000#; -- zlib.h:132 + -- zlib.h:132 + Z_STREAM_END : constant := 1; -- zlib.h:133 + -- zlib.h:133 + Z_NEED_DICT : constant := 2; -- zlib.h:134 + -- zlib.h:134 + Z_ERRNO : constant := -1; -- zlib.h:135 + -- zlib.h:135 + Z_STREAM_ERROR : constant := -2; -- zlib.h:136 + -- zlib.h:136 + Z_DATA_ERROR : constant := -3; -- zlib.h:137 + -- zlib.h:137 + Z_MEM_ERROR : constant := -4; -- zlib.h:138 + -- zlib.h:138 + Z_BUF_ERROR : constant := -5; -- zlib.h:139 + -- zlib.h:139 + Z_VERSION_ERROR : constant := -6; -- zlib.h:140 + -- zlib.h:140 + Z_NO_COMPRESSION : constant := 8#0000#; -- zlib.h:145 + -- zlib.h:145 + Z_BEST_SPEED : constant := 1; -- zlib.h:146 + -- zlib.h:146 + Z_BEST_COMPRESSION : constant := 9; -- zlib.h:147 + -- zlib.h:147 + Z_DEFAULT_COMPRESSION : constant := -1; -- zlib.h:148 + -- zlib.h:148 + Z_FILTERED : constant := 1; -- zlib.h:151 + -- zlib.h:151 + Z_HUFFMAN_ONLY : constant := 2; -- zlib.h:152 + -- zlib.h:152 + Z_DEFAULT_STRATEGY : constant := 8#0000#; -- zlib.h:153 + -- zlib.h:153 + Z_BINARY : constant := 8#0000#; -- zlib.h:156 + -- zlib.h:156 + Z_ASCII : constant := 1; -- zlib.h:157 + -- zlib.h:157 + Z_UNKNOWN : constant := 2; -- zlib.h:158 + -- zlib.h:158 + Z_DEFLATED : constant := 8; -- zlib.h:161 + -- zlib.h:161 + Z_NULL : constant := 8#0000#; -- zlib.h:164 + -- for initializing zalloc, zfree, opaque + -- zlib.h:164 + type gzFile is new Voidp; -- zlib.h:646 + + type Z_Stream is private; + + type Z_Streamp is access all Z_Stream; -- zlib.h:89 + + type alloc_func is access function + (Opaque : Voidp; + Items : UInt; + Size : UInt) + return Voidp; -- zlib.h:63 + + type free_func is access procedure (opaque : Voidp; address : Voidp); + + function zlibVersion return Chars_Ptr; + + function Deflate (strm : Z_Streamp; flush : Int) return Int; + + function DeflateEnd (strm : Z_Streamp) return Int; + + function Inflate (strm : Z_Streamp; flush : Int) return Int; + + function InflateEnd (strm : Z_Streamp) return Int; + + function deflateSetDictionary + (strm : Z_Streamp; + dictionary : Byte_Access; + dictLength : UInt) + return Int; + + function deflateCopy (dest : Z_Streamp; source : Z_Streamp) return Int; + -- zlib.h:478 + + function deflateReset (strm : Z_Streamp) return Int; -- zlib.h:495 + + function deflateParams + (strm : Z_Streamp; + level : Int; + strategy : Int) + return Int; -- zlib.h:506 + + function inflateSetDictionary + (strm : Z_Streamp; + dictionary : Byte_Access; + dictLength : UInt) + return Int; -- zlib.h:548 + + function inflateSync (strm : Z_Streamp) return Int; -- zlib.h:565 + + function inflateReset (strm : Z_Streamp) return Int; -- zlib.h:580 + + function compress + (dest : Byte_Access; + destLen : ULong_Access; + source : Byte_Access; + sourceLen : ULong) + return Int; -- zlib.h:601 + + function compress2 + (dest : Byte_Access; + destLen : ULong_Access; + source : Byte_Access; + sourceLen : ULong; + level : Int) + return Int; -- zlib.h:615 + + function uncompress + (dest : Byte_Access; + destLen : ULong_Access; + source : Byte_Access; + sourceLen : ULong) + return Int; + + function gzopen (path : Chars_Ptr; mode : Chars_Ptr) return gzFile; + + function gzdopen (fd : Int; mode : Chars_Ptr) return gzFile; + + function gzsetparams + (file : gzFile; + level : Int; + strategy : Int) + return Int; + + function gzread + (file : gzFile; + buf : Voidp; + len : UInt) + return Int; + + function gzwrite + (file : in gzFile; + buf : in Voidp; + len : in UInt) + return Int; + + function gzprintf (file : in gzFile; format : in Chars_Ptr) return Int; + + function gzputs (file : in gzFile; s : in Chars_Ptr) return Int; + + function gzgets + (file : gzFile; + buf : Chars_Ptr; + len : Int) + return Chars_Ptr; + + function gzputc (file : gzFile; char : Int) return Int; + + function gzgetc (file : gzFile) return Int; + + function gzflush (file : gzFile; flush : Int) return Int; + + function gzseek + (file : gzFile; + offset : Int; + whence : Int) + return Int; + + function gzrewind (file : gzFile) return Int; + + function gztell (file : gzFile) return Int; + + function gzeof (file : gzFile) return Int; + + function gzclose (file : gzFile) return Int; + + function gzerror (file : gzFile; errnum : Int_Access) return Chars_Ptr; + + function adler32 + (adler : ULong; + buf : Byte_Access; + len : UInt) + return ULong; + + function crc32 + (crc : ULong; + buf : Byte_Access; + len : UInt) + return ULong; + + function deflateInit + (strm : Z_Streamp; + level : Int; + version : Chars_Ptr; + stream_size : Int) + return Int; + + function deflateInit2 + (strm : Z_Streamp; + level : Int; + method : Int; + windowBits : Int; + memLevel : Int; + strategy : Int; + version : Chars_Ptr; + stream_size : Int) + return Int; + + function Deflate_Init + (strm : Z_Streamp; + level : Int; + method : Int; + windowBits : Int; + memLevel : Int; + strategy : Int) + return Int; + pragma Inline (Deflate_Init); + + function inflateInit + (strm : Z_Streamp; + version : Chars_Ptr; + stream_size : Int) + return Int; + + function inflateInit2 + (strm : in Z_Streamp; + windowBits : in Int; + version : in Chars_Ptr; + stream_size : in Int) + return Int; + + function inflateBackInit + (strm : in Z_Streamp; + windowBits : in Int; + window : in Byte_Access; + version : in Chars_Ptr; + stream_size : in Int) + return Int; + -- Size of window have to be 2**windowBits. + + function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int; + pragma Inline (Inflate_Init); + + function zError (err : Int) return Chars_Ptr; + + function inflateSyncPoint (z : Z_Streamp) return Int; + + function get_crc_table return ULong_Access; + + -- Interface to the available fields of the z_stream structure. + -- The application must update next_in and avail_in when avail_in has + -- dropped to zero. It must update next_out and avail_out when avail_out + -- has dropped to zero. The application must initialize zalloc, zfree and + -- opaque before calling the init function. + + procedure Set_In + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt); + pragma Inline (Set_In); + + procedure Set_Out + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt); + pragma Inline (Set_Out); + + procedure Set_Mem_Func + (Strm : in out Z_Stream; + Opaque : in Voidp; + Alloc : in alloc_func; + Free : in free_func); + pragma Inline (Set_Mem_Func); + + function Last_Error_Message (Strm : in Z_Stream) return String; + pragma Inline (Last_Error_Message); + + function Avail_Out (Strm : in Z_Stream) return UInt; + pragma Inline (Avail_Out); + + function Avail_In (Strm : in Z_Stream) return UInt; + pragma Inline (Avail_In); + + function Total_In (Strm : in Z_Stream) return ULong; + pragma Inline (Total_In); + + function Total_Out (Strm : in Z_Stream) return ULong; + pragma Inline (Total_Out); + + function inflateCopy + (dest : in Z_Streamp; + Source : in Z_Streamp) + return Int; + + function compressBound (Source_Len : in ULong) return ULong; + + function deflateBound + (Strm : in Z_Streamp; + Source_Len : in ULong) + return ULong; + + function gzungetc (C : in Int; File : in gzFile) return Int; + + function zlibCompileFlags return ULong; + +private + + type Z_Stream is record -- zlib.h:68 + Next_In : Voidp := Nul; -- next input byte + Avail_In : UInt := 0; -- number of bytes available at next_in + Total_In : ULong := 0; -- total nb of input bytes read so far + Next_Out : Voidp := Nul; -- next output byte should be put there + Avail_Out : UInt := 0; -- remaining free space at next_out + Total_Out : ULong := 0; -- total nb of bytes output so far + msg : Chars_Ptr; -- last error message, NULL if no error + state : Voidp; -- not visible by applications + zalloc : alloc_func := null; -- used to allocate the internal state + zfree : free_func := null; -- used to free the internal state + opaque : Voidp; -- private data object passed to + -- zalloc and zfree + data_type : Int; -- best guess about the data type: + -- ascii or binary + adler : ULong; -- adler32 value of the uncompressed + -- data + reserved : ULong; -- reserved for future use + end record; + + pragma Convention (C, Z_Stream); + + pragma Import (C, zlibVersion, "zlibVersion"); + pragma Import (C, Deflate, "deflate"); + pragma Import (C, DeflateEnd, "deflateEnd"); + pragma Import (C, Inflate, "inflate"); + pragma Import (C, InflateEnd, "inflateEnd"); + pragma Import (C, deflateSetDictionary, "deflateSetDictionary"); + pragma Import (C, deflateCopy, "deflateCopy"); + pragma Import (C, deflateReset, "deflateReset"); + pragma Import (C, deflateParams, "deflateParams"); + pragma Import (C, inflateSetDictionary, "inflateSetDictionary"); + pragma Import (C, inflateSync, "inflateSync"); + pragma Import (C, inflateReset, "inflateReset"); + pragma Import (C, compress, "compress"); + pragma Import (C, compress2, "compress2"); + pragma Import (C, uncompress, "uncompress"); + pragma Import (C, gzopen, "gzopen"); + pragma Import (C, gzdopen, "gzdopen"); + pragma Import (C, gzsetparams, "gzsetparams"); + pragma Import (C, gzread, "gzread"); + pragma Import (C, gzwrite, "gzwrite"); + pragma Import (C, gzprintf, "gzprintf"); + pragma Import (C, gzputs, "gzputs"); + pragma Import (C, gzgets, "gzgets"); + pragma Import (C, gzputc, "gzputc"); + pragma Import (C, gzgetc, "gzgetc"); + pragma Import (C, gzflush, "gzflush"); + pragma Import (C, gzseek, "gzseek"); + pragma Import (C, gzrewind, "gzrewind"); + pragma Import (C, gztell, "gztell"); + pragma Import (C, gzeof, "gzeof"); + pragma Import (C, gzclose, "gzclose"); + pragma Import (C, gzerror, "gzerror"); + pragma Import (C, adler32, "adler32"); + pragma Import (C, crc32, "crc32"); + pragma Import (C, deflateInit, "deflateInit_"); + pragma Import (C, inflateInit, "inflateInit_"); + pragma Import (C, deflateInit2, "deflateInit2_"); + pragma Import (C, inflateInit2, "inflateInit2_"); + pragma Import (C, zError, "zError"); + pragma Import (C, inflateSyncPoint, "inflateSyncPoint"); + pragma Import (C, get_crc_table, "get_crc_table"); + + -- since zlib 1.2.0: + + pragma Import (C, inflateCopy, "inflateCopy"); + pragma Import (C, compressBound, "compressBound"); + pragma Import (C, deflateBound, "deflateBound"); + pragma Import (C, gzungetc, "gzungetc"); + pragma Import (C, zlibCompileFlags, "zlibCompileFlags"); + + pragma Import (C, inflateBackInit, "inflateBackInit_"); + + -- I stopped binding the inflateBack routines, becouse realize that + -- it does not support zlib and gzip headers for now, and have no + -- symmetric deflateBack routines. + -- ZLib-Ada is symmetric regarding deflate/inflate data transformation + -- and has a similar generic callback interface for the + -- deflate/inflate transformation based on the regular Deflate/Inflate + -- routines. + + -- pragma Import (C, inflateBack, "inflateBack"); + -- pragma Import (C, inflateBackEnd, "inflateBackEnd"); + +end ZLib.Thin; diff --git a/common/dist/zlib/contrib/ada/zlib.adb b/common/dist/zlib/contrib/ada/zlib.adb new file mode 100644 index 000000000..ee0c91bbe --- /dev/null +++ b/common/dist/zlib/contrib/ada/zlib.adb @@ -0,0 +1,701 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2004 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- Id: zlib.adb,v 1.31 2004/09/06 06:53:19 vagul Exp + +with Ada.Exceptions; +with Ada.Unchecked_Conversion; +with Ada.Unchecked_Deallocation; + +with Interfaces.C.Strings; + +with ZLib.Thin; + +package body ZLib is + + use type Thin.Int; + + type Z_Stream is new Thin.Z_Stream; + + type Return_Code_Enum is + (OK, + STREAM_END, + NEED_DICT, + ERRNO, + STREAM_ERROR, + DATA_ERROR, + MEM_ERROR, + BUF_ERROR, + VERSION_ERROR); + + type Flate_Step_Function is access + function (Strm : in Thin.Z_Streamp; Flush : in Thin.Int) return Thin.Int; + pragma Convention (C, Flate_Step_Function); + + type Flate_End_Function is access + function (Ctrm : in Thin.Z_Streamp) return Thin.Int; + pragma Convention (C, Flate_End_Function); + + type Flate_Type is record + Step : Flate_Step_Function; + Done : Flate_End_Function; + end record; + + subtype Footer_Array is Stream_Element_Array (1 .. 8); + + Simple_GZip_Header : constant Stream_Element_Array (1 .. 10) + := (16#1f#, 16#8b#, -- Magic header + 16#08#, -- Z_DEFLATED + 16#00#, -- Flags + 16#00#, 16#00#, 16#00#, 16#00#, -- Time + 16#00#, -- XFlags + 16#03# -- OS code + ); + -- The simplest gzip header is not for informational, but just for + -- gzip format compatibility. + -- Note that some code below is using assumption + -- Simple_GZip_Header'Last > Footer_Array'Last, so do not make + -- Simple_GZip_Header'Last <= Footer_Array'Last. + + Return_Code : constant array (Thin.Int range <>) of Return_Code_Enum + := (0 => OK, + 1 => STREAM_END, + 2 => NEED_DICT, + -1 => ERRNO, + -2 => STREAM_ERROR, + -3 => DATA_ERROR, + -4 => MEM_ERROR, + -5 => BUF_ERROR, + -6 => VERSION_ERROR); + + Flate : constant array (Boolean) of Flate_Type + := (True => (Step => Thin.Deflate'Access, + Done => Thin.DeflateEnd'Access), + False => (Step => Thin.Inflate'Access, + Done => Thin.InflateEnd'Access)); + + Flush_Finish : constant array (Boolean) of Flush_Mode + := (True => Finish, False => No_Flush); + + procedure Raise_Error (Stream : in Z_Stream); + pragma Inline (Raise_Error); + + procedure Raise_Error (Message : in String); + pragma Inline (Raise_Error); + + procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int); + + procedure Free is new Ada.Unchecked_Deallocation + (Z_Stream, Z_Stream_Access); + + function To_Thin_Access is new Ada.Unchecked_Conversion + (Z_Stream_Access, Thin.Z_Streamp); + + procedure Translate_GZip + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + -- Separate translate routine for make gzip header. + + procedure Translate_Auto + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + -- translate routine without additional headers. + + ----------------- + -- Check_Error -- + ----------------- + + procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int) is + use type Thin.Int; + begin + if Code /= Thin.Z_OK then + Raise_Error + (Return_Code_Enum'Image (Return_Code (Code)) + & ": " & Last_Error_Message (Stream)); + end if; + end Check_Error; + + ----------- + -- Close -- + ----------- + + procedure Close + (Filter : in out Filter_Type; + Ignore_Error : in Boolean := False) + is + Code : Thin.Int; + begin + if not Ignore_Error and then not Is_Open (Filter) then + raise Status_Error; + end if; + + Code := Flate (Filter.Compression).Done (To_Thin_Access (Filter.Strm)); + + if Ignore_Error or else Code = Thin.Z_OK then + Free (Filter.Strm); + else + declare + Error_Message : constant String + := Last_Error_Message (Filter.Strm.all); + begin + Free (Filter.Strm); + Ada.Exceptions.Raise_Exception + (ZLib_Error'Identity, + Return_Code_Enum'Image (Return_Code (Code)) + & ": " & Error_Message); + end; + end if; + end Close; + + ----------- + -- CRC32 -- + ----------- + + function CRC32 + (CRC : in Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array) + return Unsigned_32 + is + use Thin; + begin + return Unsigned_32 (crc32 (ULong (CRC), + Data'Address, + Data'Length)); + end CRC32; + + procedure CRC32 + (CRC : in out Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array) is + begin + CRC := CRC32 (CRC, Data); + end CRC32; + + ------------------ + -- Deflate_Init -- + ------------------ + + procedure Deflate_Init + (Filter : in out Filter_Type; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Method : in Compression_Method := Deflated; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Memory_Level : in Memory_Level_Type := Default_Memory_Level; + Header : in Header_Type := Default) + is + use type Thin.Int; + Win_Bits : Thin.Int := Thin.Int (Window_Bits); + begin + if Is_Open (Filter) then + raise Status_Error; + end if; + + -- We allow ZLib to make header only in case of default header type. + -- Otherwise we would either do header by ourselfs, or do not do + -- header at all. + + if Header = None or else Header = GZip then + Win_Bits := -Win_Bits; + end if; + + -- For the GZip CRC calculation and make headers. + + if Header = GZip then + Filter.CRC := 0; + Filter.Offset := Simple_GZip_Header'First; + else + Filter.Offset := Simple_GZip_Header'Last + 1; + end if; + + Filter.Strm := new Z_Stream; + Filter.Compression := True; + Filter.Stream_End := False; + Filter.Header := Header; + + if Thin.Deflate_Init + (To_Thin_Access (Filter.Strm), + Level => Thin.Int (Level), + method => Thin.Int (Method), + windowBits => Win_Bits, + memLevel => Thin.Int (Memory_Level), + strategy => Thin.Int (Strategy)) /= Thin.Z_OK + then + Raise_Error (Filter.Strm.all); + end if; + end Deflate_Init; + + ----------- + -- Flush -- + ----------- + + procedure Flush + (Filter : in out Filter_Type; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) + is + No_Data : Stream_Element_Array := (1 .. 0 => 0); + Last : Stream_Element_Offset; + begin + Translate (Filter, No_Data, Last, Out_Data, Out_Last, Flush); + end Flush; + + ----------------------- + -- Generic_Translate -- + ----------------------- + + procedure Generic_Translate + (Filter : in out ZLib.Filter_Type; + In_Buffer_Size : in Integer := Default_Buffer_Size; + Out_Buffer_Size : in Integer := Default_Buffer_Size) + is + In_Buffer : Stream_Element_Array + (1 .. Stream_Element_Offset (In_Buffer_Size)); + Out_Buffer : Stream_Element_Array + (1 .. Stream_Element_Offset (Out_Buffer_Size)); + Last : Stream_Element_Offset; + In_Last : Stream_Element_Offset; + In_First : Stream_Element_Offset; + Out_Last : Stream_Element_Offset; + begin + Main : loop + Data_In (In_Buffer, Last); + + In_First := In_Buffer'First; + + loop + Translate + (Filter => Filter, + In_Data => In_Buffer (In_First .. Last), + In_Last => In_Last, + Out_Data => Out_Buffer, + Out_Last => Out_Last, + Flush => Flush_Finish (Last < In_Buffer'First)); + + if Out_Buffer'First <= Out_Last then + Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last)); + end if; + + exit Main when Stream_End (Filter); + + -- The end of in buffer. + + exit when In_Last = Last; + + In_First := In_Last + 1; + end loop; + end loop Main; + + end Generic_Translate; + + ------------------ + -- Inflate_Init -- + ------------------ + + procedure Inflate_Init + (Filter : in out Filter_Type; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Header : in Header_Type := Default) + is + use type Thin.Int; + Win_Bits : Thin.Int := Thin.Int (Window_Bits); + + procedure Check_Version; + -- Check the latest header types compatibility. + + procedure Check_Version is + begin + if Version <= "1.1.4" then + Raise_Error + ("Inflate header type " & Header_Type'Image (Header) + & " incompatible with ZLib version " & Version); + end if; + end Check_Version; + + begin + if Is_Open (Filter) then + raise Status_Error; + end if; + + case Header is + when None => + Check_Version; + + -- Inflate data without headers determined + -- by negative Win_Bits. + + Win_Bits := -Win_Bits; + when GZip => + Check_Version; + + -- Inflate gzip data defined by flag 16. + + Win_Bits := Win_Bits + 16; + when Auto => + Check_Version; + + -- Inflate with automatic detection + -- of gzip or native header defined by flag 32. + + Win_Bits := Win_Bits + 32; + when Default => null; + end case; + + Filter.Strm := new Z_Stream; + Filter.Compression := False; + Filter.Stream_End := False; + Filter.Header := Header; + + if Thin.Inflate_Init + (To_Thin_Access (Filter.Strm), Win_Bits) /= Thin.Z_OK + then + Raise_Error (Filter.Strm.all); + end if; + end Inflate_Init; + + ------------- + -- Is_Open -- + ------------- + + function Is_Open (Filter : in Filter_Type) return Boolean is + begin + return Filter.Strm /= null; + end Is_Open; + + ----------------- + -- Raise_Error -- + ----------------- + + procedure Raise_Error (Message : in String) is + begin + Ada.Exceptions.Raise_Exception (ZLib_Error'Identity, Message); + end Raise_Error; + + procedure Raise_Error (Stream : in Z_Stream) is + begin + Raise_Error (Last_Error_Message (Stream)); + end Raise_Error; + + ---------- + -- Read -- + ---------- + + procedure Read + (Filter : in out Filter_Type; + Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode := No_Flush) + is + In_Last : Stream_Element_Offset; + Item_First : Ada.Streams.Stream_Element_Offset := Item'First; + V_Flush : Flush_Mode := Flush; + + begin + pragma Assert (Rest_First in Buffer'First .. Buffer'Last + 1); + pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last); + + loop + if Rest_Last = Buffer'First - 1 then + V_Flush := Finish; + + elsif Rest_First > Rest_Last then + Read (Buffer, Rest_Last); + Rest_First := Buffer'First; + + if Rest_Last < Buffer'First then + V_Flush := Finish; + end if; + end if; + + Translate + (Filter => Filter, + In_Data => Buffer (Rest_First .. Rest_Last), + In_Last => In_Last, + Out_Data => Item (Item_First .. Item'Last), + Out_Last => Last, + Flush => V_Flush); + + Rest_First := In_Last + 1; + + exit when Stream_End (Filter) + or else Last = Item'Last + or else (Last >= Item'First and then Allow_Read_Some); + + Item_First := Last + 1; + end loop; + end Read; + + ---------------- + -- Stream_End -- + ---------------- + + function Stream_End (Filter : in Filter_Type) return Boolean is + begin + if Filter.Header = GZip and Filter.Compression then + return Filter.Stream_End + and then Filter.Offset = Footer_Array'Last + 1; + else + return Filter.Stream_End; + end if; + end Stream_End; + + -------------- + -- Total_In -- + -------------- + + function Total_In (Filter : in Filter_Type) return Count is + begin + return Count (Thin.Total_In (To_Thin_Access (Filter.Strm).all)); + end Total_In; + + --------------- + -- Total_Out -- + --------------- + + function Total_Out (Filter : in Filter_Type) return Count is + begin + return Count (Thin.Total_Out (To_Thin_Access (Filter.Strm).all)); + end Total_Out; + + --------------- + -- Translate -- + --------------- + + procedure Translate + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) is + begin + if Filter.Header = GZip and then Filter.Compression then + Translate_GZip + (Filter => Filter, + In_Data => In_Data, + In_Last => In_Last, + Out_Data => Out_Data, + Out_Last => Out_Last, + Flush => Flush); + else + Translate_Auto + (Filter => Filter, + In_Data => In_Data, + In_Last => In_Last, + Out_Data => Out_Data, + Out_Last => Out_Last, + Flush => Flush); + end if; + end Translate; + + -------------------- + -- Translate_Auto -- + -------------------- + + procedure Translate_Auto + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) + is + use type Thin.Int; + Code : Thin.Int; + + begin + if not Is_Open (Filter) then + raise Status_Error; + end if; + + if Out_Data'Length = 0 and then In_Data'Length = 0 then + raise Constraint_Error; + end if; + + Set_Out (Filter.Strm.all, Out_Data'Address, Out_Data'Length); + Set_In (Filter.Strm.all, In_Data'Address, In_Data'Length); + + Code := Flate (Filter.Compression).Step + (To_Thin_Access (Filter.Strm), + Thin.Int (Flush)); + + if Code = Thin.Z_STREAM_END then + Filter.Stream_End := True; + else + Check_Error (Filter.Strm.all, Code); + end if; + + In_Last := In_Data'Last + - Stream_Element_Offset (Avail_In (Filter.Strm.all)); + Out_Last := Out_Data'Last + - Stream_Element_Offset (Avail_Out (Filter.Strm.all)); + end Translate_Auto; + + -------------------- + -- Translate_GZip -- + -------------------- + + procedure Translate_GZip + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) + is + Out_First : Stream_Element_Offset; + + procedure Add_Data (Data : in Stream_Element_Array); + -- Add data to stream from the Filter.Offset till necessary, + -- used for add gzip headr/footer. + + procedure Put_32 + (Item : in out Stream_Element_Array; + Data : in Unsigned_32); + pragma Inline (Put_32); + + -------------- + -- Add_Data -- + -------------- + + procedure Add_Data (Data : in Stream_Element_Array) is + Data_First : Stream_Element_Offset renames Filter.Offset; + Data_Last : Stream_Element_Offset; + Data_Len : Stream_Element_Offset; -- -1 + Out_Len : Stream_Element_Offset; -- -1 + begin + Out_First := Out_Last + 1; + + if Data_First > Data'Last then + return; + end if; + + Data_Len := Data'Last - Data_First; + Out_Len := Out_Data'Last - Out_First; + + if Data_Len <= Out_Len then + Out_Last := Out_First + Data_Len; + Data_Last := Data'Last; + else + Out_Last := Out_Data'Last; + Data_Last := Data_First + Out_Len; + end if; + + Out_Data (Out_First .. Out_Last) := Data (Data_First .. Data_Last); + + Data_First := Data_Last + 1; + Out_First := Out_Last + 1; + end Add_Data; + + ------------ + -- Put_32 -- + ------------ + + procedure Put_32 + (Item : in out Stream_Element_Array; + Data : in Unsigned_32) + is + D : Unsigned_32 := Data; + begin + for J in Item'First .. Item'First + 3 loop + Item (J) := Stream_Element (D and 16#FF#); + D := Shift_Right (D, 8); + end loop; + end Put_32; + + begin + Out_Last := Out_Data'First - 1; + + if not Filter.Stream_End then + Add_Data (Simple_GZip_Header); + + Translate_Auto + (Filter => Filter, + In_Data => In_Data, + In_Last => In_Last, + Out_Data => Out_Data (Out_First .. Out_Data'Last), + Out_Last => Out_Last, + Flush => Flush); + + CRC32 (Filter.CRC, In_Data (In_Data'First .. In_Last)); + end if; + + if Filter.Stream_End and then Out_Last <= Out_Data'Last then + -- This detection method would work only when + -- Simple_GZip_Header'Last > Footer_Array'Last + + if Filter.Offset = Simple_GZip_Header'Last + 1 then + Filter.Offset := Footer_Array'First; + end if; + + declare + Footer : Footer_Array; + begin + Put_32 (Footer, Filter.CRC); + Put_32 (Footer (Footer'First + 4 .. Footer'Last), + Unsigned_32 (Total_In (Filter))); + Add_Data (Footer); + end; + end if; + end Translate_GZip; + + ------------- + -- Version -- + ------------- + + function Version return String is + begin + return Interfaces.C.Strings.Value (Thin.zlibVersion); + end Version; + + ----------- + -- Write -- + ----------- + + procedure Write + (Filter : in out Filter_Type; + Item : in Ada.Streams.Stream_Element_Array; + Flush : in Flush_Mode := No_Flush) + is + Buffer : Stream_Element_Array (1 .. Buffer_Size); + In_Last : Stream_Element_Offset; + Out_Last : Stream_Element_Offset; + In_First : Stream_Element_Offset := Item'First; + begin + if Item'Length = 0 and Flush = No_Flush then + return; + end if; + + loop + Translate + (Filter => Filter, + In_Data => Item (In_First .. Item'Last), + In_Last => In_Last, + Out_Data => Buffer, + Out_Last => Out_Last, + Flush => Flush); + + if Out_Last >= Buffer'First then + Write (Buffer (1 .. Out_Last)); + end if; + + exit when In_Last = Item'Last or Stream_End (Filter); + + In_First := In_Last + 1; + end loop; + end Write; + +end ZLib; diff --git a/common/dist/zlib/contrib/ada/zlib.ads b/common/dist/zlib/contrib/ada/zlib.ads new file mode 100644 index 000000000..e59ad893c --- /dev/null +++ b/common/dist/zlib/contrib/ada/zlib.ads @@ -0,0 +1,328 @@ +------------------------------------------------------------------------------ +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2004 Dmitriy Anisimkov -- +-- -- +-- This library is free software; you can redistribute it and/or modify -- +-- it under the terms of the GNU General Public License as published by -- +-- the Free Software Foundation; either version 2 of the License, or (at -- +-- your option) any later version. -- +-- -- +-- This library is distributed in the hope that it will be useful, but -- +-- WITHOUT ANY WARRANTY; without even the implied warranty of -- +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -- +-- General Public License for more details. -- +-- -- +-- You should have received a copy of the GNU General Public License -- +-- along with this library; if not, write to the Free Software Foundation, -- +-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -- +-- -- +-- As a special exception, if other files instantiate generics from this -- +-- unit, or you link this unit with other files to produce an executable, -- +-- this unit does not by itself cause the resulting executable to be -- +-- covered by the GNU General Public License. This exception does not -- +-- however invalidate any other reasons why the executable file might be -- +-- covered by the GNU Public License. -- +------------------------------------------------------------------------------ + +-- Id: zlib.ads,v 1.26 2004/09/06 06:53:19 vagul Exp + +with Ada.Streams; + +with Interfaces; + +package ZLib is + + ZLib_Error : exception; + Status_Error : exception; + + type Compression_Level is new Integer range -1 .. 9; + + type Flush_Mode is private; + + type Compression_Method is private; + + type Window_Bits_Type is new Integer range 8 .. 15; + + type Memory_Level_Type is new Integer range 1 .. 9; + + type Unsigned_32 is new Interfaces.Unsigned_32; + + type Strategy_Type is private; + + type Header_Type is (None, Auto, Default, GZip); + -- Header type usage have a some limitation for inflate. + -- See comment for Inflate_Init. + + subtype Count is Ada.Streams.Stream_Element_Count; + + Default_Memory_Level : constant Memory_Level_Type := 8; + Default_Window_Bits : constant Window_Bits_Type := 15; + + ---------------------------------- + -- Compression method constants -- + ---------------------------------- + + Deflated : constant Compression_Method; + -- Only one method allowed in this ZLib version + + --------------------------------- + -- Compression level constants -- + --------------------------------- + + No_Compression : constant Compression_Level := 0; + Best_Speed : constant Compression_Level := 1; + Best_Compression : constant Compression_Level := 9; + Default_Compression : constant Compression_Level := -1; + + -------------------------- + -- Flush mode constants -- + -------------------------- + + No_Flush : constant Flush_Mode; + -- Regular way for compression, no flush + + Partial_Flush : constant Flush_Mode; + -- Will be removed, use Z_SYNC_FLUSH instead + + Sync_Flush : constant Flush_Mode; + -- All pending output is flushed to the output buffer and the output + -- is aligned on a byte boundary, so that the decompressor can get all + -- input data available so far. (In particular avail_in is zero after the + -- call if enough output space has been provided before the call.) + -- Flushing may degrade compression for some compression algorithms and so + -- it should be used only when necessary. + + Block_Flush : constant Flush_Mode; + -- Z_BLOCK requests that inflate() stop + -- if and when it get to the next deflate block boundary. When decoding the + -- zlib or gzip format, this will cause inflate() to return immediately + -- after the header and before the first block. When doing a raw inflate, + -- inflate() will go ahead and process the first block, and will return + -- when it gets to the end of that block, or when it runs out of data. + + Full_Flush : constant Flush_Mode; + -- All output is flushed as with SYNC_FLUSH, and the compression state + -- is reset so that decompression can restart from this point if previous + -- compressed data has been damaged or if random access is desired. Using + -- Full_Flush too often can seriously degrade the compression. + + Finish : constant Flush_Mode; + -- Just for tell the compressor that input data is complete. + + ------------------------------------ + -- Compression strategy constants -- + ------------------------------------ + + -- RLE stategy could be used only in version 1.2.0 and later. + + Filtered : constant Strategy_Type; + Huffman_Only : constant Strategy_Type; + RLE : constant Strategy_Type; + Default_Strategy : constant Strategy_Type; + + Default_Buffer_Size : constant := 4096; + + type Filter_Type is tagged limited private; + -- The filter is for compression and for decompression. + -- The usage of the type is depend of its initialization. + + function Version return String; + pragma Inline (Version); + -- Return string representation of the ZLib version. + + procedure Deflate_Init + (Filter : in out Filter_Type; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Method : in Compression_Method := Deflated; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Memory_Level : in Memory_Level_Type := Default_Memory_Level; + Header : in Header_Type := Default); + -- Compressor initialization. + -- When Header parameter is Auto or Default, then default zlib header + -- would be provided for compressed data. + -- When Header is GZip, then gzip header would be set instead of + -- default header. + -- When Header is None, no header would be set for compressed data. + + procedure Inflate_Init + (Filter : in out Filter_Type; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Header : in Header_Type := Default); + -- Decompressor initialization. + -- Default header type mean that ZLib default header is expecting in the + -- input compressed stream. + -- Header type None mean that no header is expecting in the input stream. + -- GZip header type mean that GZip header is expecting in the + -- input compressed stream. + -- Auto header type mean that header type (GZip or Native) would be + -- detected automatically in the input stream. + -- Note that header types parameter values None, GZip and Auto are + -- supported for inflate routine only in ZLib versions 1.2.0.2 and later. + -- Deflate_Init is supporting all header types. + + function Is_Open (Filter : in Filter_Type) return Boolean; + pragma Inline (Is_Open); + -- Is the filter opened for compression or decompression. + + procedure Close + (Filter : in out Filter_Type; + Ignore_Error : in Boolean := False); + -- Closing the compression or decompressor. + -- If stream is closing before the complete and Ignore_Error is False, + -- The exception would be raised. + + generic + with procedure Data_In + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + with procedure Data_Out + (Item : in Ada.Streams.Stream_Element_Array); + procedure Generic_Translate + (Filter : in out Filter_Type; + In_Buffer_Size : in Integer := Default_Buffer_Size; + Out_Buffer_Size : in Integer := Default_Buffer_Size); + -- Compress/decompress data fetch from Data_In routine and pass the result + -- to the Data_Out routine. User should provide Data_In and Data_Out + -- for compression/decompression data flow. + -- Compression or decompression depend on Filter initialization. + + function Total_In (Filter : in Filter_Type) return Count; + pragma Inline (Total_In); + -- Returns total number of input bytes read so far + + function Total_Out (Filter : in Filter_Type) return Count; + pragma Inline (Total_Out); + -- Returns total number of bytes output so far + + function CRC32 + (CRC : in Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array) + return Unsigned_32; + pragma Inline (CRC32); + -- Compute CRC32, it could be necessary for make gzip format + + procedure CRC32 + (CRC : in out Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array); + pragma Inline (CRC32); + -- Compute CRC32, it could be necessary for make gzip format + + ------------------------------------------------- + -- Below is more complex low level routines. -- + ------------------------------------------------- + + procedure Translate + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + -- Compress/decompress the In_Data buffer and place the result into + -- Out_Data. In_Last is the index of last element from In_Data accepted by + -- the Filter. Out_Last is the last element of the received data from + -- Filter. To tell the filter that incoming data are complete put the + -- Flush parameter to Finish. + + function Stream_End (Filter : in Filter_Type) return Boolean; + pragma Inline (Stream_End); + -- Return the true when the stream is complete. + + procedure Flush + (Filter : in out Filter_Type; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + pragma Inline (Flush); + -- Flushing the data from the compressor. + + generic + with procedure Write + (Item : in Ada.Streams.Stream_Element_Array); + -- User should provide this routine for accept + -- compressed/decompressed data. + + Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size; + -- Buffer size for Write user routine. + + procedure Write + (Filter : in out Filter_Type; + Item : in Ada.Streams.Stream_Element_Array; + Flush : in Flush_Mode := No_Flush); + -- Compress/Decompress data from Item to the generic parameter procedure + -- Write. Output buffer size could be set in Buffer_Size generic parameter. + + generic + with procedure Read + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + -- User should provide data for compression/decompression + -- thru this routine. + + Buffer : in out Ada.Streams.Stream_Element_Array; + -- Buffer for keep remaining data from the previous + -- back read. + + Rest_First, Rest_Last : in out Ada.Streams.Stream_Element_Offset; + -- Rest_First have to be initialized to Buffer'Last + 1 + -- Rest_Last have to be initialized to Buffer'Last + -- before usage. + + Allow_Read_Some : in Boolean := False; + -- Is it allowed to return Last < Item'Last before end of data. + + procedure Read + (Filter : in out Filter_Type; + Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode := No_Flush); + -- Compress/Decompress data from generic parameter procedure Read to the + -- Item. User should provide Buffer and initialized Rest_First, Rest_Last + -- indicators. If Allow_Read_Some is True, Read routines could return + -- Last < Item'Last only at end of stream. + +private + + use Ada.Streams; + + pragma Assert (Ada.Streams.Stream_Element'Size = 8); + pragma Assert (Ada.Streams.Stream_Element'Modulus = 2**8); + + type Flush_Mode is new Integer range 0 .. 5; + + type Compression_Method is new Integer range 8 .. 8; + + type Strategy_Type is new Integer range 0 .. 3; + + No_Flush : constant Flush_Mode := 0; + Partial_Flush : constant Flush_Mode := 1; + Sync_Flush : constant Flush_Mode := 2; + Full_Flush : constant Flush_Mode := 3; + Finish : constant Flush_Mode := 4; + Block_Flush : constant Flush_Mode := 5; + + Filtered : constant Strategy_Type := 1; + Huffman_Only : constant Strategy_Type := 2; + RLE : constant Strategy_Type := 3; + Default_Strategy : constant Strategy_Type := 0; + + Deflated : constant Compression_Method := 8; + + type Z_Stream; + + type Z_Stream_Access is access all Z_Stream; + + type Filter_Type is tagged limited record + Strm : Z_Stream_Access; + Compression : Boolean; + Stream_End : Boolean; + Header : Header_Type; + CRC : Unsigned_32; + Offset : Stream_Element_Offset; + -- Offset for gzip header/footer output. + end record; + +end ZLib; diff --git a/common/dist/zlib/contrib/ada/zlib.gpr b/common/dist/zlib/contrib/ada/zlib.gpr new file mode 100644 index 000000000..296b22aa9 --- /dev/null +++ b/common/dist/zlib/contrib/ada/zlib.gpr @@ -0,0 +1,20 @@ +project Zlib is + + for Languages use ("Ada"); + for Source_Dirs use ("."); + for Object_Dir use "."; + for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo"); + + package Compiler is + for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst"); + end Compiler; + + package Linker is + for Default_Switches ("ada") use ("-lz"); + end Linker; + + package Builder is + for Default_Switches ("ada") use ("-s", "-gnatQ"); + end Builder; + +end Zlib; diff --git a/common/dist/zlib/contrib/asm586/README.586 b/common/dist/zlib/contrib/asm586/README.586 new file mode 100644 index 000000000..26812cc0d --- /dev/null +++ b/common/dist/zlib/contrib/asm586/README.586 @@ -0,0 +1,43 @@ +This is a patched version of zlib modified to use +Pentium-optimized assembly code in the deflation algorithm. The files +changed/added by this patch are: + +README.586 +match.S + +The effectiveness of these modifications is a bit marginal, as the +program's bottleneck seems to be mostly L1-cache contention, for which +there is no real way to work around without rewriting the basic +algorithm. The speedup on average is around 5-10% (which is generally +less than the amount of variance between subsequent executions). +However, when used at level 9 compression, the cache contention can +drop enough for the assembly version to achieve 10-20% speedup (and +sometimes more, depending on the amount of overall redundancy in the +files). Even here, though, cache contention can still be the limiting +factor, depending on the nature of the program using the zlib library. +This may also mean that better improvements will be seen on a Pentium +with MMX, which suffers much less from L1-cache contention, but I have +not yet verified this. + +Note that this code has been tailored for the Pentium in particular, +and will not perform well on the Pentium Pro (due to the use of a +partial register in the inner loop). + +If you are using an assembler other than GNU as, you will have to +translate match.S to use your assembler's syntax. (Have fun.) + +Brian Raiter +breadbox@muppetlabs.com +April, 1998 + + +Added for zlib 1.1.3: + +The patches come from +http://www.muppetlabs.com/~breadbox/software/assembly.html + +To compile zlib with this asm file, copy match.S to the zlib directory +then do: + +CFLAGS="-O3 -DASMV" ./configure +make OBJA=match.o diff --git a/common/dist/zlib/contrib/asm586/match.S b/common/dist/zlib/contrib/asm586/match.S new file mode 100644 index 000000000..0368b35fe --- /dev/null +++ b/common/dist/zlib/contrib/asm586/match.S @@ -0,0 +1,364 @@ +/* match.s -- Pentium-optimized version of longest_match() + * Written for zlib 1.1.2 + * Copyright (C) 1998 Brian Raiter + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License. + */ + +#ifndef NO_UNDERLINE +#define match_init _match_init +#define longest_match _longest_match +#endif + +#define MAX_MATCH (258) +#define MIN_MATCH (3) +#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1) +#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7) + +/* stack frame offsets */ + +#define wmask 0 /* local copy of s->wmask */ +#define window 4 /* local copy of s->window */ +#define windowbestlen 8 /* s->window + bestlen */ +#define chainlenscanend 12 /* high word: current chain len */ + /* low word: last bytes sought */ +#define scanstart 16 /* first two bytes of string */ +#define scanalign 20 /* dword-misalignment of string */ +#define nicematch 24 /* a good enough match size */ +#define bestlen 28 /* size of best match so far */ +#define scan 32 /* ptr to string wanting match */ + +#define LocalVarsSize (36) +/* saved ebx 36 */ +/* saved edi 40 */ +/* saved esi 44 */ +/* saved ebp 48 */ +/* return address 52 */ +#define deflatestate 56 /* the function arguments */ +#define curmatch 60 + +/* Offsets for fields in the deflate_state structure. These numbers + * are calculated from the definition of deflate_state, with the + * assumption that the compiler will dword-align the fields. (Thus, + * changing the definition of deflate_state could easily cause this + * program to crash horribly, without so much as a warning at + * compile time. Sigh.) + */ + +/* All the +zlib1222add offsets are due to the addition of fields + * in zlib in the deflate_state structure since the asm code was first written + * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). + * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). + * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). + */ + +#define zlib1222add (8) + +#define dsWSize (36+zlib1222add) +#define dsWMask (44+zlib1222add) +#define dsWindow (48+zlib1222add) +#define dsPrev (56+zlib1222add) +#define dsMatchLen (88+zlib1222add) +#define dsPrevMatch (92+zlib1222add) +#define dsStrStart (100+zlib1222add) +#define dsMatchStart (104+zlib1222add) +#define dsLookahead (108+zlib1222add) +#define dsPrevLen (112+zlib1222add) +#define dsMaxChainLen (116+zlib1222add) +#define dsGoodMatch (132+zlib1222add) +#define dsNiceMatch (136+zlib1222add) + + +.file "match.S" + +.globl match_init, longest_match + +.text + +/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */ + +longest_match: + +/* Save registers that the compiler may be using, and adjust %esp to */ +/* make room for our stack frame. */ + + pushl %ebp + pushl %edi + pushl %esi + pushl %ebx + subl $LocalVarsSize, %esp + +/* Retrieve the function arguments. %ecx will hold cur_match */ +/* throughout the entire function. %edx will hold the pointer to the */ +/* deflate_state structure during the function's setup (before */ +/* entering the main loop). */ + + movl deflatestate(%esp), %edx + movl curmatch(%esp), %ecx + +/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */ + + movl dsNiceMatch(%edx), %eax + movl dsLookahead(%edx), %ebx + cmpl %eax, %ebx + jl LookaheadLess + movl %eax, %ebx +LookaheadLess: movl %ebx, nicematch(%esp) + +/* register Bytef *scan = s->window + s->strstart; */ + + movl dsWindow(%edx), %esi + movl %esi, window(%esp) + movl dsStrStart(%edx), %ebp + lea (%esi,%ebp), %edi + movl %edi, scan(%esp) + +/* Determine how many bytes the scan ptr is off from being */ +/* dword-aligned. */ + + movl %edi, %eax + negl %eax + andl $3, %eax + movl %eax, scanalign(%esp) + +/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */ +/* s->strstart - (IPos)MAX_DIST(s) : NIL; */ + + movl dsWSize(%edx), %eax + subl $MIN_LOOKAHEAD, %eax + subl %eax, %ebp + jg LimitPositive + xorl %ebp, %ebp +LimitPositive: + +/* unsigned chain_length = s->max_chain_length; */ +/* if (s->prev_length >= s->good_match) { */ +/* chain_length >>= 2; */ +/* } */ + + movl dsPrevLen(%edx), %eax + movl dsGoodMatch(%edx), %ebx + cmpl %ebx, %eax + movl dsMaxChainLen(%edx), %ebx + jl LastMatchGood + shrl $2, %ebx +LastMatchGood: + +/* chainlen is decremented once beforehand so that the function can */ +/* use the sign flag instead of the zero flag for the exit test. */ +/* It is then shifted into the high word, to make room for the scanend */ +/* scanend value, which it will always accompany. */ + + decl %ebx + shll $16, %ebx + +/* int best_len = s->prev_length; */ + + movl dsPrevLen(%edx), %eax + movl %eax, bestlen(%esp) + +/* Store the sum of s->window + best_len in %esi locally, and in %esi. */ + + addl %eax, %esi + movl %esi, windowbestlen(%esp) + +/* register ush scan_start = *(ushf*)scan; */ +/* register ush scan_end = *(ushf*)(scan+best_len-1); */ + + movw (%edi), %bx + movw %bx, scanstart(%esp) + movw -1(%edi,%eax), %bx + movl %ebx, chainlenscanend(%esp) + +/* Posf *prev = s->prev; */ +/* uInt wmask = s->w_mask; */ + + movl dsPrev(%edx), %edi + movl dsWMask(%edx), %edx + mov %edx, wmask(%esp) + +/* Jump into the main loop. */ + + jmp LoopEntry + +.balign 16 + +/* do { + * match = s->window + cur_match; + * if (*(ushf*)(match+best_len-1) != scan_end || + * *(ushf*)match != scan_start) continue; + * [...] + * } while ((cur_match = prev[cur_match & wmask]) > limit + * && --chain_length != 0); + * + * Here is the inner loop of the function. The function will spend the + * majority of its time in this loop, and majority of that time will + * be spent in the first ten instructions. + * + * Within this loop: + * %ebx = chainlenscanend - i.e., ((chainlen << 16) | scanend) + * %ecx = curmatch + * %edx = curmatch & wmask + * %esi = windowbestlen - i.e., (window + bestlen) + * %edi = prev + * %ebp = limit + * + * Two optimization notes on the choice of instructions: + * + * The first instruction uses a 16-bit address, which costs an extra, + * unpairable cycle. This is cheaper than doing a 32-bit access and + * zeroing the high word, due to the 3-cycle misalignment penalty which + * would occur half the time. This also turns out to be cheaper than + * doing two separate 8-bit accesses, as the memory is so rarely in the + * L1 cache. + * + * The window buffer, however, apparently spends a lot of time in the + * cache, and so it is faster to retrieve the word at the end of the + * match string with two 8-bit loads. The instructions that test the + * word at the beginning of the match string, however, are executed + * much less frequently, and there it was cheaper to use 16-bit + * instructions, which avoided the necessity of saving off and + * subsequently reloading one of the other registers. + */ +LookupLoop: + /* 1 U & V */ + movw (%edi,%edx,2), %cx /* 2 U pipe */ + movl wmask(%esp), %edx /* 2 V pipe */ + cmpl %ebp, %ecx /* 3 U pipe */ + jbe LeaveNow /* 3 V pipe */ + subl $0x00010000, %ebx /* 4 U pipe */ + js LeaveNow /* 4 V pipe */ +LoopEntry: movb -1(%esi,%ecx), %al /* 5 U pipe */ + andl %ecx, %edx /* 5 V pipe */ + cmpb %bl, %al /* 6 U pipe */ + jnz LookupLoop /* 6 V pipe */ + movb (%esi,%ecx), %ah + cmpb %bh, %ah + jnz LookupLoop + movl window(%esp), %eax + movw (%eax,%ecx), %ax + cmpw scanstart(%esp), %ax + jnz LookupLoop + +/* Store the current value of chainlen. */ + + movl %ebx, chainlenscanend(%esp) + +/* Point %edi to the string under scrutiny, and %esi to the string we */ +/* are hoping to match it up with. In actuality, %esi and %edi are */ +/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */ +/* initialized to -(MAX_MATCH_8 - scanalign). */ + + movl window(%esp), %esi + movl scan(%esp), %edi + addl %ecx, %esi + movl scanalign(%esp), %eax + movl $(-MAX_MATCH_8), %edx + lea MAX_MATCH_8(%edi,%eax), %edi + lea MAX_MATCH_8(%esi,%eax), %esi + +/* Test the strings for equality, 8 bytes at a time. At the end, + * adjust %edx so that it is offset to the exact byte that mismatched. + * + * We already know at this point that the first three bytes of the + * strings match each other, and they can be safely passed over before + * starting the compare loop. So what this code does is skip over 0-3 + * bytes, as much as necessary in order to dword-align the %edi + * pointer. (%esi will still be misaligned three times out of four.) + * + * It should be confessed that this loop usually does not represent + * much of the total running time. Replacing it with a more + * straightforward "rep cmpsb" would not drastically degrade + * performance. + */ +LoopCmps: + movl (%esi,%edx), %eax + movl (%edi,%edx), %ebx + xorl %ebx, %eax + jnz LeaveLoopCmps + movl 4(%esi,%edx), %eax + movl 4(%edi,%edx), %ebx + xorl %ebx, %eax + jnz LeaveLoopCmps4 + addl $8, %edx + jnz LoopCmps + jmp LenMaximum +LeaveLoopCmps4: addl $4, %edx +LeaveLoopCmps: testl $0x0000FFFF, %eax + jnz LenLower + addl $2, %edx + shrl $16, %eax +LenLower: subb $1, %al + adcl $0, %edx + +/* Calculate the length of the match. If it is longer than MAX_MATCH, */ +/* then automatically accept it as the best possible match and leave. */ + + lea (%edi,%edx), %eax + movl scan(%esp), %edi + subl %edi, %eax + cmpl $MAX_MATCH, %eax + jge LenMaximum + +/* If the length of the match is not longer than the best match we */ +/* have so far, then forget it and return to the lookup loop. */ + + movl deflatestate(%esp), %edx + movl bestlen(%esp), %ebx + cmpl %ebx, %eax + jg LongerMatch + movl chainlenscanend(%esp), %ebx + movl windowbestlen(%esp), %esi + movl dsPrev(%edx), %edi + movl wmask(%esp), %edx + andl %ecx, %edx + jmp LookupLoop + +/* s->match_start = cur_match; */ +/* best_len = len; */ +/* if (len >= nice_match) break; */ +/* scan_end = *(ushf*)(scan+best_len-1); */ + +LongerMatch: movl nicematch(%esp), %ebx + movl %eax, bestlen(%esp) + movl %ecx, dsMatchStart(%edx) + cmpl %ebx, %eax + jge LeaveNow + movl window(%esp), %esi + addl %eax, %esi + movl %esi, windowbestlen(%esp) + movl chainlenscanend(%esp), %ebx + movw -1(%edi,%eax), %bx + movl dsPrev(%edx), %edi + movl %ebx, chainlenscanend(%esp) + movl wmask(%esp), %edx + andl %ecx, %edx + jmp LookupLoop + +/* Accept the current string, with the maximum possible length. */ + +LenMaximum: movl deflatestate(%esp), %edx + movl $MAX_MATCH, bestlen(%esp) + movl %ecx, dsMatchStart(%edx) + +/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */ +/* return s->lookahead; */ + +LeaveNow: + movl deflatestate(%esp), %edx + movl bestlen(%esp), %ebx + movl dsLookahead(%edx), %eax + cmpl %eax, %ebx + jg LookaheadRet + movl %ebx, %eax +LookaheadRet: + +/* Restore the stack and return from whence we came. */ + + addl $LocalVarsSize, %esp + popl %ebx + popl %esi + popl %edi + popl %ebp +match_init: ret diff --git a/common/dist/zlib/contrib/asm686/README.686 b/common/dist/zlib/contrib/asm686/README.686 new file mode 100644 index 000000000..a593f23af --- /dev/null +++ b/common/dist/zlib/contrib/asm686/README.686 @@ -0,0 +1,34 @@ +This is a patched version of zlib, modified to use +Pentium-Pro-optimized assembly code in the deflation algorithm. The +files changed/added by this patch are: + +README.686 +match.S + +The speedup that this patch provides varies, depending on whether the +compiler used to build the original version of zlib falls afoul of the +PPro's speed traps. My own tests show a speedup of around 10-20% at +the default compression level, and 20-30% using -9, against a version +compiled using gcc 2.7.2.3. Your mileage may vary. + +Note that this code has been tailored for the PPro/PII in particular, +and will not perform particuarly well on a Pentium. + +If you are using an assembler other than GNU as, you will have to +translate match.S to use your assembler's syntax. (Have fun.) + +Brian Raiter +breadbox@muppetlabs.com +April, 1998 + + +Added for zlib 1.1.3: + +The patches come from +http://www.muppetlabs.com/~breadbox/software/assembly.html + +To compile zlib with this asm file, copy match.S to the zlib directory +then do: + +CFLAGS="-O3 -DASMV" ./configure +make OBJA=match.o diff --git a/common/dist/zlib/contrib/asm686/match.S b/common/dist/zlib/contrib/asm686/match.S new file mode 100644 index 000000000..5c3e9ee36 --- /dev/null +++ b/common/dist/zlib/contrib/asm686/match.S @@ -0,0 +1,329 @@ +/* match.s -- Pentium-Pro-optimized version of longest_match() + * Written for zlib 1.1.2 + * Copyright (C) 1998 Brian Raiter + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License. + */ + +#ifndef NO_UNDERLINE +#define match_init _match_init +#define longest_match _longest_match +#endif + +#define MAX_MATCH (258) +#define MIN_MATCH (3) +#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1) +#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7) + +/* stack frame offsets */ + +#define chainlenwmask 0 /* high word: current chain len */ + /* low word: s->wmask */ +#define window 4 /* local copy of s->window */ +#define windowbestlen 8 /* s->window + bestlen */ +#define scanstart 16 /* first two bytes of string */ +#define scanend 12 /* last two bytes of string */ +#define scanalign 20 /* dword-misalignment of string */ +#define nicematch 24 /* a good enough match size */ +#define bestlen 28 /* size of best match so far */ +#define scan 32 /* ptr to string wanting match */ + +#define LocalVarsSize (36) +/* saved ebx 36 */ +/* saved edi 40 */ +/* saved esi 44 */ +/* saved ebp 48 */ +/* return address 52 */ +#define deflatestate 56 /* the function arguments */ +#define curmatch 60 + +/* All the +zlib1222add offsets are due to the addition of fields + * in zlib in the deflate_state structure since the asm code was first written + * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). + * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). + * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). + */ + +#define zlib1222add (8) + +#define dsWSize (36+zlib1222add) +#define dsWMask (44+zlib1222add) +#define dsWindow (48+zlib1222add) +#define dsPrev (56+zlib1222add) +#define dsMatchLen (88+zlib1222add) +#define dsPrevMatch (92+zlib1222add) +#define dsStrStart (100+zlib1222add) +#define dsMatchStart (104+zlib1222add) +#define dsLookahead (108+zlib1222add) +#define dsPrevLen (112+zlib1222add) +#define dsMaxChainLen (116+zlib1222add) +#define dsGoodMatch (132+zlib1222add) +#define dsNiceMatch (136+zlib1222add) + + +.file "match.S" + +.globl match_init, longest_match + +.text + +/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */ + +longest_match: + +/* Save registers that the compiler may be using, and adjust %esp to */ +/* make room for our stack frame. */ + + pushl %ebp + pushl %edi + pushl %esi + pushl %ebx + subl $LocalVarsSize, %esp + +/* Retrieve the function arguments. %ecx will hold cur_match */ +/* throughout the entire function. %edx will hold the pointer to the */ +/* deflate_state structure during the function's setup (before */ +/* entering the main loop). */ + + movl deflatestate(%esp), %edx + movl curmatch(%esp), %ecx + +/* uInt wmask = s->w_mask; */ +/* unsigned chain_length = s->max_chain_length; */ +/* if (s->prev_length >= s->good_match) { */ +/* chain_length >>= 2; */ +/* } */ + + movl dsPrevLen(%edx), %eax + movl dsGoodMatch(%edx), %ebx + cmpl %ebx, %eax + movl dsWMask(%edx), %eax + movl dsMaxChainLen(%edx), %ebx + jl LastMatchGood + shrl $2, %ebx +LastMatchGood: + +/* chainlen is decremented once beforehand so that the function can */ +/* use the sign flag instead of the zero flag for the exit test. */ +/* It is then shifted into the high word, to make room for the wmask */ +/* value, which it will always accompany. */ + + decl %ebx + shll $16, %ebx + orl %eax, %ebx + movl %ebx, chainlenwmask(%esp) + +/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */ + + movl dsNiceMatch(%edx), %eax + movl dsLookahead(%edx), %ebx + cmpl %eax, %ebx + jl LookaheadLess + movl %eax, %ebx +LookaheadLess: movl %ebx, nicematch(%esp) + +/* register Bytef *scan = s->window + s->strstart; */ + + movl dsWindow(%edx), %esi + movl %esi, window(%esp) + movl dsStrStart(%edx), %ebp + lea (%esi,%ebp), %edi + movl %edi, scan(%esp) + +/* Determine how many bytes the scan ptr is off from being */ +/* dword-aligned. */ + + movl %edi, %eax + negl %eax + andl $3, %eax + movl %eax, scanalign(%esp) + +/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */ +/* s->strstart - (IPos)MAX_DIST(s) : NIL; */ + + movl dsWSize(%edx), %eax + subl $MIN_LOOKAHEAD, %eax + subl %eax, %ebp + jg LimitPositive + xorl %ebp, %ebp +LimitPositive: + +/* int best_len = s->prev_length; */ + + movl dsPrevLen(%edx), %eax + movl %eax, bestlen(%esp) + +/* Store the sum of s->window + best_len in %esi locally, and in %esi. */ + + addl %eax, %esi + movl %esi, windowbestlen(%esp) + +/* register ush scan_start = *(ushf*)scan; */ +/* register ush scan_end = *(ushf*)(scan+best_len-1); */ +/* Posf *prev = s->prev; */ + + movzwl (%edi), %ebx + movl %ebx, scanstart(%esp) + movzwl -1(%edi,%eax), %ebx + movl %ebx, scanend(%esp) + movl dsPrev(%edx), %edi + +/* Jump into the main loop. */ + + movl chainlenwmask(%esp), %edx + jmp LoopEntry + +.balign 16 + +/* do { + * match = s->window + cur_match; + * if (*(ushf*)(match+best_len-1) != scan_end || + * *(ushf*)match != scan_start) continue; + * [...] + * } while ((cur_match = prev[cur_match & wmask]) > limit + * && --chain_length != 0); + * + * Here is the inner loop of the function. The function will spend the + * majority of its time in this loop, and majority of that time will + * be spent in the first ten instructions. + * + * Within this loop: + * %ebx = scanend + * %ecx = curmatch + * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) + * %esi = windowbestlen - i.e., (window + bestlen) + * %edi = prev + * %ebp = limit + */ +LookupLoop: + andl %edx, %ecx + movzwl (%edi,%ecx,2), %ecx + cmpl %ebp, %ecx + jbe LeaveNow + subl $0x00010000, %edx + js LeaveNow +LoopEntry: movzwl -1(%esi,%ecx), %eax + cmpl %ebx, %eax + jnz LookupLoop + movl window(%esp), %eax + movzwl (%eax,%ecx), %eax + cmpl scanstart(%esp), %eax + jnz LookupLoop + +/* Store the current value of chainlen. */ + + movl %edx, chainlenwmask(%esp) + +/* Point %edi to the string under scrutiny, and %esi to the string we */ +/* are hoping to match it up with. In actuality, %esi and %edi are */ +/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */ +/* initialized to -(MAX_MATCH_8 - scanalign). */ + + movl window(%esp), %esi + movl scan(%esp), %edi + addl %ecx, %esi + movl scanalign(%esp), %eax + movl $(-MAX_MATCH_8), %edx + lea MAX_MATCH_8(%edi,%eax), %edi + lea MAX_MATCH_8(%esi,%eax), %esi + +/* Test the strings for equality, 8 bytes at a time. At the end, + * adjust %edx so that it is offset to the exact byte that mismatched. + * + * We already know at this point that the first three bytes of the + * strings match each other, and they can be safely passed over before + * starting the compare loop. So what this code does is skip over 0-3 + * bytes, as much as necessary in order to dword-align the %edi + * pointer. (%esi will still be misaligned three times out of four.) + * + * It should be confessed that this loop usually does not represent + * much of the total running time. Replacing it with a more + * straightforward "rep cmpsb" would not drastically degrade + * performance. + */ +LoopCmps: + movl (%esi,%edx), %eax + xorl (%edi,%edx), %eax + jnz LeaveLoopCmps + movl 4(%esi,%edx), %eax + xorl 4(%edi,%edx), %eax + jnz LeaveLoopCmps4 + addl $8, %edx + jnz LoopCmps + jmp LenMaximum +LeaveLoopCmps4: addl $4, %edx +LeaveLoopCmps: testl $0x0000FFFF, %eax + jnz LenLower + addl $2, %edx + shrl $16, %eax +LenLower: subb $1, %al + adcl $0, %edx + +/* Calculate the length of the match. If it is longer than MAX_MATCH, */ +/* then automatically accept it as the best possible match and leave. */ + + lea (%edi,%edx), %eax + movl scan(%esp), %edi + subl %edi, %eax + cmpl $MAX_MATCH, %eax + jge LenMaximum + +/* If the length of the match is not longer than the best match we */ +/* have so far, then forget it and return to the lookup loop. */ + + movl deflatestate(%esp), %edx + movl bestlen(%esp), %ebx + cmpl %ebx, %eax + jg LongerMatch + movl windowbestlen(%esp), %esi + movl dsPrev(%edx), %edi + movl scanend(%esp), %ebx + movl chainlenwmask(%esp), %edx + jmp LookupLoop + +/* s->match_start = cur_match; */ +/* best_len = len; */ +/* if (len >= nice_match) break; */ +/* scan_end = *(ushf*)(scan+best_len-1); */ + +LongerMatch: movl nicematch(%esp), %ebx + movl %eax, bestlen(%esp) + movl %ecx, dsMatchStart(%edx) + cmpl %ebx, %eax + jge LeaveNow + movl window(%esp), %esi + addl %eax, %esi + movl %esi, windowbestlen(%esp) + movzwl -1(%edi,%eax), %ebx + movl dsPrev(%edx), %edi + movl %ebx, scanend(%esp) + movl chainlenwmask(%esp), %edx + jmp LookupLoop + +/* Accept the current string, with the maximum possible length. */ + +LenMaximum: movl deflatestate(%esp), %edx + movl $MAX_MATCH, bestlen(%esp) + movl %ecx, dsMatchStart(%edx) + +/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */ +/* return s->lookahead; */ + +LeaveNow: + movl deflatestate(%esp), %edx + movl bestlen(%esp), %ebx + movl dsLookahead(%edx), %eax + cmpl %eax, %ebx + jg LookaheadRet + movl %ebx, %eax +LookaheadRet: + +/* Restore the stack and return from whence we came. */ + + addl $LocalVarsSize, %esp + popl %ebx + popl %esi + popl %edi + popl %ebp +match_init: ret diff --git a/common/dist/zlib/contrib/blast/Makefile b/common/dist/zlib/contrib/blast/Makefile new file mode 100644 index 000000000..9be80bafe --- /dev/null +++ b/common/dist/zlib/contrib/blast/Makefile @@ -0,0 +1,8 @@ +blast: blast.c blast.h + cc -DTEST -o blast blast.c + +test: blast + blast < test.pk | cmp - test.txt + +clean: + rm -f blast blast.o diff --git a/common/dist/zlib/contrib/blast/README b/common/dist/zlib/contrib/blast/README new file mode 100644 index 000000000..e3a60b3f5 --- /dev/null +++ b/common/dist/zlib/contrib/blast/README @@ -0,0 +1,4 @@ +Read blast.h for purpose and usage. + +Mark Adler +madler@alumni.caltech.edu diff --git a/common/dist/zlib/contrib/blast/blast.c b/common/dist/zlib/contrib/blast/blast.c new file mode 100644 index 000000000..8b8822a9f --- /dev/null +++ b/common/dist/zlib/contrib/blast/blast.c @@ -0,0 +1,446 @@ +/* $NetBSD: blast.c,v 1.1.1.1 2006/01/14 20:10:46 christos Exp $ */ + +/* blast.c + * Copyright (C) 2003 Mark Adler + * For conditions of distribution and use, see copyright notice in blast.h + * version 1.1, 16 Feb 2003 + * + * blast.c decompresses data compressed by the PKWare Compression Library. + * This function provides functionality similar to the explode() function of + * the PKWare library, hence the name "blast". + * + * This decompressor is based on the excellent format description provided by + * Ben Rudiak-Gould in comp.compression on August 13, 2001. Interestingly, the + * example Ben provided in the post is incorrect. The distance 110001 should + * instead be 111000. When corrected, the example byte stream becomes: + * + * 00 04 82 24 25 8f 80 7f + * + * which decompresses to "AIAIAIAIAIAIA" (without the quotes). + */ + +/* + * Change history: + * + * 1.0 12 Feb 2003 - First version + * 1.1 16 Feb 2003 - Fixed distance check for > 4 GB uncompressed data + */ + +#include /* for setjmp(), longjmp(), and jmp_buf */ +#include "blast.h" /* prototype for blast() */ + +#define local static /* for local function definitions */ +#define MAXBITS 13 /* maximum code length */ +#define MAXWIN 4096 /* maximum window size */ + +/* input and output state */ +struct state { + /* input state */ + blast_in infun; /* input function provided by user */ + void *inhow; /* opaque information passed to infun() */ + unsigned char *in; /* next input location */ + unsigned left; /* available input at in */ + int bitbuf; /* bit buffer */ + int bitcnt; /* number of bits in bit buffer */ + + /* input limit error return state for bits() and decode() */ + jmp_buf env; + + /* output state */ + blast_out outfun; /* output function provided by user */ + void *outhow; /* opaque information passed to outfun() */ + unsigned next; /* index of next write location in out[] */ + int first; /* true to check distances (for first 4K) */ + unsigned char out[MAXWIN]; /* output buffer and sliding window */ +}; + +/* + * Return need bits from the input stream. This always leaves less than + * eight bits in the buffer. bits() works properly for need == 0. + * + * Format notes: + * + * - Bits are stored in bytes from the least significant bit to the most + * significant bit. Therefore bits are dropped from the bottom of the bit + * buffer, using shift right, and new bytes are appended to the top of the + * bit buffer, using shift left. + */ +local int bits(struct state *s, int need) +{ + int val; /* bit accumulator */ + + /* load at least need bits into val */ + val = s->bitbuf; + while (s->bitcnt < need) { + if (s->left == 0) { + s->left = s->infun(s->inhow, &(s->in)); + if (s->left == 0) longjmp(s->env, 1); /* out of input */ + } + val |= (int)(*(s->in)++) << s->bitcnt; /* load eight bits */ + s->left--; + s->bitcnt += 8; + } + + /* drop need bits and update buffer, always zero to seven bits left */ + s->bitbuf = val >> need; + s->bitcnt -= need; + + /* return need bits, zeroing the bits above that */ + return val & ((1 << need) - 1); +} + +/* + * Huffman code decoding tables. count[1..MAXBITS] is the number of symbols of + * each length, which for a canonical code are stepped through in order. + * symbol[] are the symbol values in canonical order, where the number of + * entries is the sum of the counts in count[]. The decoding process can be + * seen in the function decode() below. + */ +struct huffman { + short *count; /* number of symbols of each length */ + short *symbol; /* canonically ordered symbols */ +}; + +/* + * Decode a code from the stream s using huffman table h. Return the symbol or + * a negative value if there is an error. If all of the lengths are zero, i.e. + * an empty code, or if the code is incomplete and an invalid code is received, + * then -9 is returned after reading MAXBITS bits. + * + * Format notes: + * + * - The codes as stored in the compressed data are bit-reversed relative to + * a simple integer ordering of codes of the same lengths. Hence below the + * bits are pulled from the compressed data one at a time and used to + * build the code value reversed from what is in the stream in order to + * permit simple integer comparisons for decoding. + * + * - The first code for the shortest length is all ones. Subsequent codes of + * the same length are simply integer decrements of the previous code. When + * moving up a length, a one bit is appended to the code. For a complete + * code, the last code of the longest length will be all zeros. To support + * this ordering, the bits pulled during decoding are inverted to apply the + * more "natural" ordering starting with all zeros and incrementing. + */ +local int decode(struct state *s, struct huffman *h) +{ + int len; /* current number of bits in code */ + int code; /* len bits being decoded */ + int first; /* first code of length len */ + int count; /* number of codes of length len */ + int index; /* index of first code of length len in symbol table */ + int bitbuf; /* bits from stream */ + int left; /* bits left in next or left to process */ + short *next; /* next number of codes */ + + bitbuf = s->bitbuf; + left = s->bitcnt; + code = first = index = 0; + len = 1; + next = h->count + 1; + while (1) { + while (left--) { + code |= (bitbuf & 1) ^ 1; /* invert code */ + bitbuf >>= 1; + count = *next++; + if (code < first + count) { /* if length len, return symbol */ + s->bitbuf = bitbuf; + s->bitcnt = (s->bitcnt - len) & 7; + return h->symbol[index + (code - first)]; + } + index += count; /* else update for next length */ + first += count; + first <<= 1; + code <<= 1; + len++; + } + left = (MAXBITS+1) - len; + if (left == 0) break; + if (s->left == 0) { + s->left = s->infun(s->inhow, &(s->in)); + if (s->left == 0) longjmp(s->env, 1); /* out of input */ + } + bitbuf = *(s->in)++; + s->left--; + if (left > 8) left = 8; + } + return -9; /* ran out of codes */ +} + +/* + * Given a list of repeated code lengths rep[0..n-1], where each byte is a + * count (high four bits + 1) and a code length (low four bits), generate the + * list of code lengths. This compaction reduces the size of the object code. + * Then given the list of code lengths length[0..n-1] representing a canonical + * Huffman code for n symbols, construct the tables required to decode those + * codes. Those tables are the number of codes of each length, and the symbols + * sorted by length, retaining their original order within each length. The + * return value is zero for a complete code set, negative for an over- + * subscribed code set, and positive for an incomplete code set. The tables + * can be used if the return value is zero or positive, but they cannot be used + * if the return value is negative. If the return value is zero, it is not + * possible for decode() using that table to return an error--any stream of + * enough bits will resolve to a symbol. If the return value is positive, then + * it is possible for decode() using that table to return an error for received + * codes past the end of the incomplete lengths. + */ +local int construct(struct huffman *h, const unsigned char *rep, int n) +{ + int symbol; /* current symbol when stepping through length[] */ + int len; /* current length when stepping through h->count[] */ + int left; /* number of possible codes left of current length */ + short offs[MAXBITS+1]; /* offsets in symbol table for each length */ + short length[256]; /* code lengths */ + + /* convert compact repeat counts into symbol bit length list */ + symbol = 0; + do { + len = *rep++; + left = (len >> 4) + 1; + len &= 15; + do { + length[symbol++] = len; + } while (--left); + } while (--n); + n = symbol; + + /* count number of codes of each length */ + for (len = 0; len <= MAXBITS; len++) + h->count[len] = 0; + for (symbol = 0; symbol < n; symbol++) + (h->count[length[symbol]])++; /* assumes lengths are within bounds */ + if (h->count[0] == n) /* no codes! */ + return 0; /* complete, but decode() will fail */ + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; /* one possible code of zero length */ + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; /* one more bit, double codes left */ + left -= h->count[len]; /* deduct count from possible codes */ + if (left < 0) return left; /* over-subscribed--return negative */ + } /* left > 0 means incomplete */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + h->count[len]; + + /* + * put symbols in table sorted by length, by symbol order within each + * length + */ + for (symbol = 0; symbol < n; symbol++) + if (length[symbol] != 0) + h->symbol[offs[length[symbol]]++] = symbol; + + /* return zero for complete set, positive for incomplete set */ + return left; +} + +/* + * Decode PKWare Compression Library stream. + * + * Format notes: + * + * - First byte is 0 if literals are uncoded or 1 if they are coded. Second + * byte is 4, 5, or 6 for the number of extra bits in the distance code. + * This is the base-2 logarithm of the dictionary size minus six. + * + * - Compressed data is a combination of literals and length/distance pairs + * terminated by an end code. Literals are either Huffman coded or + * uncoded bytes. A length/distance pair is a coded length followed by a + * coded distance to represent a string that occurs earlier in the + * uncompressed data that occurs again at the current location. + * + * - A bit preceding a literal or length/distance pair indicates which comes + * next, 0 for literals, 1 for length/distance. + * + * - If literals are uncoded, then the next eight bits are the literal, in the + * normal bit order in th stream, i.e. no bit-reversal is needed. Similarly, + * no bit reversal is needed for either the length extra bits or the distance + * extra bits. + * + * - Literal bytes are simply written to the output. A length/distance pair is + * an instruction to copy previously uncompressed bytes to the output. The + * copy is from distance bytes back in the output stream, copying for length + * bytes. + * + * - Distances pointing before the beginning of the output data are not + * permitted. + * + * - Overlapped copies, where the length is greater than the distance, are + * allowed and common. For example, a distance of one and a length of 518 + * simply copies the last byte 518 times. A distance of four and a length of + * twelve copies the last four bytes three times. A simple forward copy + * ignoring whether the length is greater than the distance or not implements + * this correctly. + */ +local int decomp(struct state *s) +{ + int lit; /* true if literals are coded */ + int dict; /* log2(dictionary size) - 6 */ + int symbol; /* decoded symbol, extra bits for distance */ + int len; /* length for copy */ + int dist; /* distance for copy */ + int copy; /* copy counter */ + unsigned char *from, *to; /* copy pointers */ + static int virgin = 1; /* build tables once */ + static short litcnt[MAXBITS+1], litsym[256]; /* litcode memory */ + static short lencnt[MAXBITS+1], lensym[16]; /* lencode memory */ + static short distcnt[MAXBITS+1], distsym[64]; /* distcode memory */ + static struct huffman litcode = {litcnt, litsym}; /* length code */ + static struct huffman lencode = {lencnt, lensym}; /* length code */ + static struct huffman distcode = {distcnt, distsym};/* distance code */ + /* bit lengths of literal codes */ + static const unsigned char litlen[] = { + 11, 124, 8, 7, 28, 7, 188, 13, 76, 4, 10, 8, 12, 10, 12, 10, 8, 23, 8, + 9, 7, 6, 7, 8, 7, 6, 55, 8, 23, 24, 12, 11, 7, 9, 11, 12, 6, 7, 22, 5, + 7, 24, 6, 11, 9, 6, 7, 22, 7, 11, 38, 7, 9, 8, 25, 11, 8, 11, 9, 12, + 8, 12, 5, 38, 5, 38, 5, 11, 7, 5, 6, 21, 6, 10, 53, 8, 7, 24, 10, 27, + 44, 253, 253, 253, 252, 252, 252, 13, 12, 45, 12, 45, 12, 61, 12, 45, + 44, 173}; + /* bit lengths of length codes 0..15 */ + static const unsigned char lenlen[] = {2, 35, 36, 53, 38, 23}; + /* bit lengths of distance codes 0..63 */ + static const unsigned char distlen[] = {2, 20, 53, 230, 247, 151, 248}; + static const short base[16] = { /* base for length codes */ + 3, 2, 4, 5, 6, 7, 8, 9, 10, 12, 16, 24, 40, 72, 136, 264}; + static const char extra[16] = { /* extra bits for length codes */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 7, 8}; + + /* set up decoding tables (once--might not be thread-safe) */ + if (virgin) { + construct(&litcode, litlen, sizeof(litlen)); + construct(&lencode, lenlen, sizeof(lenlen)); + construct(&distcode, distlen, sizeof(distlen)); + virgin = 0; + } + + /* read header */ + lit = bits(s, 8); + if (lit > 1) return -1; + dict = bits(s, 8); + if (dict < 4 || dict > 6) return -2; + + /* decode literals and length/distance pairs */ + do { + if (bits(s, 1)) { + /* get length */ + symbol = decode(s, &lencode); + len = base[symbol] + bits(s, extra[symbol]); + if (len == 519) break; /* end code */ + + /* get distance */ + symbol = len == 2 ? 2 : dict; + dist = decode(s, &distcode) << symbol; + dist += bits(s, symbol); + dist++; + if (s->first && dist > s->next) + return -3; /* distance too far back */ + + /* copy length bytes from distance bytes back */ + do { + to = s->out + s->next; + from = to - dist; + copy = MAXWIN; + if (s->next < dist) { + from += copy; + copy = dist; + } + copy -= s->next; + if (copy > len) copy = len; + len -= copy; + s->next += copy; + do { + *to++ = *from++; + } while (--copy); + if (s->next == MAXWIN) { + if (s->outfun(s->outhow, s->out, s->next)) return 1; + s->next = 0; + s->first = 0; + } + } while (len != 0); + } + else { + /* get literal and write it */ + symbol = lit ? decode(s, &litcode) : bits(s, 8); + s->out[s->next++] = symbol; + if (s->next == MAXWIN) { + if (s->outfun(s->outhow, s->out, s->next)) return 1; + s->next = 0; + s->first = 0; + } + } + } while (1); + return 0; +} + +/* See comments in blast.h */ +int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow) +{ + struct state s; /* input/output state */ + int err; /* return value */ + + /* initialize input state */ + s.infun = infun; + s.inhow = inhow; + s.left = 0; + s.bitbuf = 0; + s.bitcnt = 0; + + /* initialize output state */ + s.outfun = outfun; + s.outhow = outhow; + s.next = 0; + s.first = 1; + + /* return if bits() or decode() tries to read past available input */ + if (setjmp(s.env) != 0) /* if came back here via longjmp(), */ + err = 2; /* then skip decomp(), return error */ + else + err = decomp(&s); /* decompress */ + + /* write any leftover output and update the error code if needed */ + if (err != 1 && s.next && s.outfun(s.outhow, s.out, s.next) && err == 0) + err = 1; + return err; +} + +#ifdef TEST +/* Example of how to use blast() */ +#include +#include + +#define CHUNK 16384 + +local unsigned inf(void *how, unsigned char **buf) +{ + static unsigned char hold[CHUNK]; + + *buf = hold; + return fread(hold, 1, CHUNK, (FILE *)how); +} + +local int outf(void *how, unsigned char *buf, unsigned len) +{ + return fwrite(buf, 1, len, (FILE *)how) != len; +} + +/* Decompress a PKWare Compression Library stream from stdin to stdout */ +int main(void) +{ + int ret, n; + + /* decompress to stdout */ + ret = blast(inf, stdin, outf, stdout); + if (ret != 0) fprintf(stderr, "blast error: %d\n", ret); + + /* see if there are any leftover bytes */ + n = 0; + while (getchar() != EOF) n++; + if (n) fprintf(stderr, "blast warning: %d unused bytes of input\n", n); + + /* return blast() error code */ + return ret; +} +#endif diff --git a/common/dist/zlib/contrib/blast/blast.h b/common/dist/zlib/contrib/blast/blast.h new file mode 100644 index 000000000..7b50c78b5 --- /dev/null +++ b/common/dist/zlib/contrib/blast/blast.h @@ -0,0 +1,73 @@ +/* $NetBSD: blast.h,v 1.1.1.1 2006/01/14 20:10:46 christos Exp $ */ + +/* blast.h -- interface for blast.c + Copyright (C) 2003 Mark Adler + version 1.1, 16 Feb 2003 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + + +/* + * blast() decompresses the PKWare Data Compression Library (DCL) compressed + * format. It provides the same functionality as the explode() function in + * that library. (Note: PKWare overused the "implode" verb, and the format + * used by their library implode() function is completely different and + * incompatible with the implode compression method supported by PKZIP.) + */ + + +typedef unsigned (*blast_in)(void *how, unsigned char **buf); +typedef int (*blast_out)(void *how, unsigned char *buf, unsigned len); +/* Definitions for input/output functions passed to blast(). See below for + * what the provided functions need to do. + */ + + +int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow); +/* Decompress input to output using the provided infun() and outfun() calls. + * On success, the return value of blast() is zero. If there is an error in + * the source data, i.e. it is not in the proper format, then a negative value + * is returned. If there is not enough input available or there is not enough + * output space, then a positive error is returned. + * + * The input function is invoked: len = infun(how, &buf), where buf is set by + * infun() to point to the input buffer, and infun() returns the number of + * available bytes there. If infun() returns zero, then blast() returns with + * an input error. (blast() only asks for input if it needs it.) inhow is for + * use by the application to pass an input descriptor to infun(), if desired. + * + * The output function is invoked: err = outfun(how, buf, len), where the bytes + * to be written are buf[0..len-1]. If err is not zero, then blast() returns + * with an output error. outfun() is always called with len <= 4096. outhow + * is for use by the application to pass an output descriptor to outfun(), if + * desired. + * + * The return codes are: + * + * 2: ran out of input before completing decompression + * 1: output error before completing decompression + * 0: successful decompression + * -1: literal flag not zero or one + * -2: dictionary size not in 4..6 + * -3: distance is too far back + * + * At the bottom of blast.c is an example program that uses blast() that can be + * compiled to produce a command-line decompression filter by defining TEST. + */ diff --git a/common/dist/zlib/contrib/blast/test.pk b/common/dist/zlib/contrib/blast/test.pk new file mode 100644 index 0000000000000000000000000000000000000000..be10b2bbb251759ffdf6da49fadd1a3f137a54c1 GIT binary patch literal 8 PcmZQzX;M+`Z>R?V2c!aC literal 0 HcmV?d00001 diff --git a/common/dist/zlib/contrib/blast/test.txt b/common/dist/zlib/contrib/blast/test.txt new file mode 100644 index 000000000..bfdf1c5dc --- /dev/null +++ b/common/dist/zlib/contrib/blast/test.txt @@ -0,0 +1 @@ +AIAIAIAIAIAIA \ No newline at end of file diff --git a/common/dist/zlib/contrib/delphi/ZLib.pas b/common/dist/zlib/contrib/delphi/ZLib.pas new file mode 100644 index 000000000..3f2b8b4a5 --- /dev/null +++ b/common/dist/zlib/contrib/delphi/ZLib.pas @@ -0,0 +1,557 @@ +{*******************************************************} +{ } +{ Borland Delphi Supplemental Components } +{ ZLIB Data Compression Interface Unit } +{ } +{ Copyright (c) 1997,99 Borland Corporation } +{ } +{*******************************************************} + +{ Updated for zlib 1.2.x by Cosmin Truta } + +unit ZLib; + +interface + +uses SysUtils, Classes; + +type + TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer; cdecl; + TFree = procedure (AppData, Block: Pointer); cdecl; + + // Internal structure. Ignore. + TZStreamRec = packed record + next_in: PChar; // next input byte + avail_in: Integer; // number of bytes available at next_in + total_in: Longint; // total nb of input bytes read so far + + next_out: PChar; // next output byte should be put here + avail_out: Integer; // remaining free space at next_out + total_out: Longint; // total nb of bytes output so far + + msg: PChar; // last error message, NULL if no error + internal: Pointer; // not visible by applications + + zalloc: TAlloc; // used to allocate the internal state + zfree: TFree; // used to free the internal state + AppData: Pointer; // private data object passed to zalloc and zfree + + data_type: Integer; // best guess about the data type: ascii or binary + adler: Longint; // adler32 value of the uncompressed data + reserved: Longint; // reserved for future use + end; + + // Abstract ancestor class + TCustomZlibStream = class(TStream) + private + FStrm: TStream; + FStrmPos: Integer; + FOnProgress: TNotifyEvent; + FZRec: TZStreamRec; + FBuffer: array [Word] of Char; + protected + procedure Progress(Sender: TObject); dynamic; + property OnProgress: TNotifyEvent read FOnProgress write FOnProgress; + constructor Create(Strm: TStream); + end; + +{ TCompressionStream compresses data on the fly as data is written to it, and + stores the compressed data to another stream. + + TCompressionStream is write-only and strictly sequential. Reading from the + stream will raise an exception. Using Seek to move the stream pointer + will raise an exception. + + Output data is cached internally, written to the output stream only when + the internal output buffer is full. All pending output data is flushed + when the stream is destroyed. + + The Position property returns the number of uncompressed bytes of + data that have been written to the stream so far. + + CompressionRate returns the on-the-fly percentage by which the original + data has been compressed: (1 - (CompressedBytes / UncompressedBytes)) * 100 + If raw data size = 100 and compressed data size = 25, the CompressionRate + is 75% + + The OnProgress event is called each time the output buffer is filled and + written to the output stream. This is useful for updating a progress + indicator when you are writing a large chunk of data to the compression + stream in a single call.} + + + TCompressionLevel = (clNone, clFastest, clDefault, clMax); + + TCompressionStream = class(TCustomZlibStream) + private + function GetCompressionRate: Single; + public + constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream); + destructor Destroy; override; + function Read(var Buffer; Count: Longint): Longint; override; + function Write(const Buffer; Count: Longint): Longint; override; + function Seek(Offset: Longint; Origin: Word): Longint; override; + property CompressionRate: Single read GetCompressionRate; + property OnProgress; + end; + +{ TDecompressionStream decompresses data on the fly as data is read from it. + + Compressed data comes from a separate source stream. TDecompressionStream + is read-only and unidirectional; you can seek forward in the stream, but not + backwards. The special case of setting the stream position to zero is + allowed. Seeking forward decompresses data until the requested position in + the uncompressed data has been reached. Seeking backwards, seeking relative + to the end of the stream, requesting the size of the stream, and writing to + the stream will raise an exception. + + The Position property returns the number of bytes of uncompressed data that + have been read from the stream so far. + + The OnProgress event is called each time the internal input buffer of + compressed data is exhausted and the next block is read from the input stream. + This is useful for updating a progress indicator when you are reading a + large chunk of data from the decompression stream in a single call.} + + TDecompressionStream = class(TCustomZlibStream) + public + constructor Create(Source: TStream); + destructor Destroy; override; + function Read(var Buffer; Count: Longint): Longint; override; + function Write(const Buffer; Count: Longint): Longint; override; + function Seek(Offset: Longint; Origin: Word): Longint; override; + property OnProgress; + end; + + + +{ CompressBuf compresses data, buffer to buffer, in one call. + In: InBuf = ptr to compressed data + InBytes = number of bytes in InBuf + Out: OutBuf = ptr to newly allocated buffer containing decompressed data + OutBytes = number of bytes in OutBuf } +procedure CompressBuf(const InBuf: Pointer; InBytes: Integer; + out OutBuf: Pointer; out OutBytes: Integer); + + +{ DecompressBuf decompresses data, buffer to buffer, in one call. + In: InBuf = ptr to compressed data + InBytes = number of bytes in InBuf + OutEstimate = zero, or est. size of the decompressed data + Out: OutBuf = ptr to newly allocated buffer containing decompressed data + OutBytes = number of bytes in OutBuf } +procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer; + OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer); + +{ DecompressToUserBuf decompresses data, buffer to buffer, in one call. + In: InBuf = ptr to compressed data + InBytes = number of bytes in InBuf + Out: OutBuf = ptr to user-allocated buffer to contain decompressed data + BufSize = number of bytes in OutBuf } +procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer; + const OutBuf: Pointer; BufSize: Integer); + +const + zlib_version = '1.2.3'; + +type + EZlibError = class(Exception); + ECompressionError = class(EZlibError); + EDecompressionError = class(EZlibError); + +implementation + +uses ZLibConst; + +const + Z_NO_FLUSH = 0; + Z_PARTIAL_FLUSH = 1; + Z_SYNC_FLUSH = 2; + Z_FULL_FLUSH = 3; + Z_FINISH = 4; + + Z_OK = 0; + Z_STREAM_END = 1; + Z_NEED_DICT = 2; + Z_ERRNO = (-1); + Z_STREAM_ERROR = (-2); + Z_DATA_ERROR = (-3); + Z_MEM_ERROR = (-4); + Z_BUF_ERROR = (-5); + Z_VERSION_ERROR = (-6); + + Z_NO_COMPRESSION = 0; + Z_BEST_SPEED = 1; + Z_BEST_COMPRESSION = 9; + Z_DEFAULT_COMPRESSION = (-1); + + Z_FILTERED = 1; + Z_HUFFMAN_ONLY = 2; + Z_RLE = 3; + Z_DEFAULT_STRATEGY = 0; + + Z_BINARY = 0; + Z_ASCII = 1; + Z_UNKNOWN = 2; + + Z_DEFLATED = 8; + + +{$L adler32.obj} +{$L compress.obj} +{$L crc32.obj} +{$L deflate.obj} +{$L infback.obj} +{$L inffast.obj} +{$L inflate.obj} +{$L inftrees.obj} +{$L trees.obj} +{$L uncompr.obj} +{$L zutil.obj} + +procedure adler32; external; +procedure compressBound; external; +procedure crc32; external; +procedure deflateInit2_; external; +procedure deflateParams; external; + +function _malloc(Size: Integer): Pointer; cdecl; +begin + Result := AllocMem(Size); +end; + +procedure _free(Block: Pointer); cdecl; +begin + FreeMem(Block); +end; + +procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl; +begin + FillChar(P^, count, B); +end; + +procedure _memcpy(dest, source: Pointer; count: Integer); cdecl; +begin + Move(source^, dest^, count); +end; + + + +// deflate compresses data +function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar; + recsize: Integer): Integer; external; +function deflate(var strm: TZStreamRec; flush: Integer): Integer; external; +function deflateEnd(var strm: TZStreamRec): Integer; external; + +// inflate decompresses data +function inflateInit_(var strm: TZStreamRec; version: PChar; + recsize: Integer): Integer; external; +function inflate(var strm: TZStreamRec; flush: Integer): Integer; external; +function inflateEnd(var strm: TZStreamRec): Integer; external; +function inflateReset(var strm: TZStreamRec): Integer; external; + + +function zlibAllocMem(AppData: Pointer; Items, Size: Integer): Pointer; cdecl; +begin +// GetMem(Result, Items*Size); + Result := AllocMem(Items * Size); +end; + +procedure zlibFreeMem(AppData, Block: Pointer); cdecl; +begin + FreeMem(Block); +end; + +{function zlibCheck(code: Integer): Integer; +begin + Result := code; + if code < 0 then + raise EZlibError.Create('error'); //!! +end;} + +function CCheck(code: Integer): Integer; +begin + Result := code; + if code < 0 then + raise ECompressionError.Create('error'); //!! +end; + +function DCheck(code: Integer): Integer; +begin + Result := code; + if code < 0 then + raise EDecompressionError.Create('error'); //!! +end; + +procedure CompressBuf(const InBuf: Pointer; InBytes: Integer; + out OutBuf: Pointer; out OutBytes: Integer); +var + strm: TZStreamRec; + P: Pointer; +begin + FillChar(strm, sizeof(strm), 0); + strm.zalloc := zlibAllocMem; + strm.zfree := zlibFreeMem; + OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255; + GetMem(OutBuf, OutBytes); + try + strm.next_in := InBuf; + strm.avail_in := InBytes; + strm.next_out := OutBuf; + strm.avail_out := OutBytes; + CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm))); + try + while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do + begin + P := OutBuf; + Inc(OutBytes, 256); + ReallocMem(OutBuf, OutBytes); + strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P))); + strm.avail_out := 256; + end; + finally + CCheck(deflateEnd(strm)); + end; + ReallocMem(OutBuf, strm.total_out); + OutBytes := strm.total_out; + except + FreeMem(OutBuf); + raise + end; +end; + + +procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer; + OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer); +var + strm: TZStreamRec; + P: Pointer; + BufInc: Integer; +begin + FillChar(strm, sizeof(strm), 0); + strm.zalloc := zlibAllocMem; + strm.zfree := zlibFreeMem; + BufInc := (InBytes + 255) and not 255; + if OutEstimate = 0 then + OutBytes := BufInc + else + OutBytes := OutEstimate; + GetMem(OutBuf, OutBytes); + try + strm.next_in := InBuf; + strm.avail_in := InBytes; + strm.next_out := OutBuf; + strm.avail_out := OutBytes; + DCheck(inflateInit_(strm, zlib_version, sizeof(strm))); + try + while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do + begin + P := OutBuf; + Inc(OutBytes, BufInc); + ReallocMem(OutBuf, OutBytes); + strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P))); + strm.avail_out := BufInc; + end; + finally + DCheck(inflateEnd(strm)); + end; + ReallocMem(OutBuf, strm.total_out); + OutBytes := strm.total_out; + except + FreeMem(OutBuf); + raise + end; +end; + +procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer; + const OutBuf: Pointer; BufSize: Integer); +var + strm: TZStreamRec; +begin + FillChar(strm, sizeof(strm), 0); + strm.zalloc := zlibAllocMem; + strm.zfree := zlibFreeMem; + strm.next_in := InBuf; + strm.avail_in := InBytes; + strm.next_out := OutBuf; + strm.avail_out := BufSize; + DCheck(inflateInit_(strm, zlib_version, sizeof(strm))); + try + if DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END then + raise EZlibError.CreateRes(@sTargetBufferTooSmall); + finally + DCheck(inflateEnd(strm)); + end; +end; + +// TCustomZlibStream + +constructor TCustomZLibStream.Create(Strm: TStream); +begin + inherited Create; + FStrm := Strm; + FStrmPos := Strm.Position; + FZRec.zalloc := zlibAllocMem; + FZRec.zfree := zlibFreeMem; +end; + +procedure TCustomZLibStream.Progress(Sender: TObject); +begin + if Assigned(FOnProgress) then FOnProgress(Sender); +end; + + +// TCompressionStream + +constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel; + Dest: TStream); +const + Levels: array [TCompressionLevel] of ShortInt = + (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION); +begin + inherited Create(Dest); + FZRec.next_out := FBuffer; + FZRec.avail_out := sizeof(FBuffer); + CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec))); +end; + +destructor TCompressionStream.Destroy; +begin + FZRec.next_in := nil; + FZRec.avail_in := 0; + try + if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos; + while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END) + and (FZRec.avail_out = 0) do + begin + FStrm.WriteBuffer(FBuffer, sizeof(FBuffer)); + FZRec.next_out := FBuffer; + FZRec.avail_out := sizeof(FBuffer); + end; + if FZRec.avail_out < sizeof(FBuffer) then + FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out); + finally + deflateEnd(FZRec); + end; + inherited Destroy; +end; + +function TCompressionStream.Read(var Buffer; Count: Longint): Longint; +begin + raise ECompressionError.CreateRes(@sInvalidStreamOp); +end; + +function TCompressionStream.Write(const Buffer; Count: Longint): Longint; +begin + FZRec.next_in := @Buffer; + FZRec.avail_in := Count; + if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos; + while (FZRec.avail_in > 0) do + begin + CCheck(deflate(FZRec, 0)); + if FZRec.avail_out = 0 then + begin + FStrm.WriteBuffer(FBuffer, sizeof(FBuffer)); + FZRec.next_out := FBuffer; + FZRec.avail_out := sizeof(FBuffer); + FStrmPos := FStrm.Position; + Progress(Self); + end; + end; + Result := Count; +end; + +function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint; +begin + if (Offset = 0) and (Origin = soFromCurrent) then + Result := FZRec.total_in + else + raise ECompressionError.CreateRes(@sInvalidStreamOp); +end; + +function TCompressionStream.GetCompressionRate: Single; +begin + if FZRec.total_in = 0 then + Result := 0 + else + Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0; +end; + + +// TDecompressionStream + +constructor TDecompressionStream.Create(Source: TStream); +begin + inherited Create(Source); + FZRec.next_in := FBuffer; + FZRec.avail_in := 0; + DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec))); +end; + +destructor TDecompressionStream.Destroy; +begin + FStrm.Seek(-FZRec.avail_in, 1); + inflateEnd(FZRec); + inherited Destroy; +end; + +function TDecompressionStream.Read(var Buffer; Count: Longint): Longint; +begin + FZRec.next_out := @Buffer; + FZRec.avail_out := Count; + if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos; + while (FZRec.avail_out > 0) do + begin + if FZRec.avail_in = 0 then + begin + FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer)); + if FZRec.avail_in = 0 then + begin + Result := Count - FZRec.avail_out; + Exit; + end; + FZRec.next_in := FBuffer; + FStrmPos := FStrm.Position; + Progress(Self); + end; + CCheck(inflate(FZRec, 0)); + end; + Result := Count; +end; + +function TDecompressionStream.Write(const Buffer; Count: Longint): Longint; +begin + raise EDecompressionError.CreateRes(@sInvalidStreamOp); +end; + +function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint; +var + I: Integer; + Buf: array [0..4095] of Char; +begin + if (Offset = 0) and (Origin = soFromBeginning) then + begin + DCheck(inflateReset(FZRec)); + FZRec.next_in := FBuffer; + FZRec.avail_in := 0; + FStrm.Position := 0; + FStrmPos := 0; + end + else if ( (Offset >= 0) and (Origin = soFromCurrent)) or + ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then + begin + if Origin = soFromBeginning then Dec(Offset, FZRec.total_out); + if Offset > 0 then + begin + for I := 1 to Offset div sizeof(Buf) do + ReadBuffer(Buf, sizeof(Buf)); + ReadBuffer(Buf, Offset mod sizeof(Buf)); + end; + end + else + raise EDecompressionError.CreateRes(@sInvalidStreamOp); + Result := FZRec.total_out; +end; + + +end. diff --git a/common/dist/zlib/contrib/delphi/ZLibConst.pas b/common/dist/zlib/contrib/delphi/ZLibConst.pas new file mode 100644 index 000000000..cdfe13671 --- /dev/null +++ b/common/dist/zlib/contrib/delphi/ZLibConst.pas @@ -0,0 +1,11 @@ +unit ZLibConst; + +interface + +resourcestring + sTargetBufferTooSmall = 'ZLib error: target buffer may be too small'; + sInvalidStreamOp = 'Invalid stream operation'; + +implementation + +end. diff --git a/common/dist/zlib/contrib/delphi/readme.txt b/common/dist/zlib/contrib/delphi/readme.txt new file mode 100644 index 000000000..2dc9a8bba --- /dev/null +++ b/common/dist/zlib/contrib/delphi/readme.txt @@ -0,0 +1,76 @@ + +Overview +======== + +This directory contains an update to the ZLib interface unit, +distributed by Borland as a Delphi supplemental component. + +The original ZLib unit is Copyright (c) 1997,99 Borland Corp., +and is based on zlib version 1.0.4. There are a series of bugs +and security problems associated with that old zlib version, and +we recommend the users to update their ZLib unit. + + +Summary of modifications +======================== + +- Improved makefile, adapted to zlib version 1.2.1. + +- Some field types from TZStreamRec are changed from Integer to + Longint, for consistency with the zlib.h header, and for 64-bit + readiness. + +- The zlib_version constant is updated. + +- The new Z_RLE strategy has its corresponding symbolic constant. + +- The allocation and deallocation functions and function types + (TAlloc, TFree, zlibAllocMem and zlibFreeMem) are now cdecl, + and _malloc and _free are added as C RTL stubs. As a result, + the original C sources of zlib can be compiled out of the box, + and linked to the ZLib unit. + + +Suggestions for improvements +============================ + +Currently, the ZLib unit provides only a limited wrapper around +the zlib library, and much of the original zlib functionality is +missing. Handling compressed file formats like ZIP/GZIP or PNG +cannot be implemented without having this functionality. +Applications that handle these formats are either using their own, +duplicated code, or not using the ZLib unit at all. + +Here are a few suggestions: + +- Checksum class wrappers around adler32() and crc32(), similar + to the Java classes that implement the java.util.zip.Checksum + interface. + +- The ability to read and write raw deflate streams, without the + zlib stream header and trailer. Raw deflate streams are used + in the ZIP file format. + +- The ability to read and write gzip streams, used in the GZIP + file format, and normally produced by the gzip program. + +- The ability to select a different compression strategy, useful + to PNG and MNG image compression, and to multimedia compression + in general. Besides the compression level + + TCompressionLevel = (clNone, clFastest, clDefault, clMax); + + which, in fact, could have used the 'z' prefix and avoided + TColor-like symbols + + TCompressionLevel = (zcNone, zcFastest, zcDefault, zcMax); + + there could be a compression strategy + + TCompressionStrategy = (zsDefault, zsFiltered, zsHuffmanOnly, zsRle); + +- ZIP and GZIP stream handling via TStreams. + + +-- +Cosmin Truta diff --git a/common/dist/zlib/contrib/delphi/zlibd32.mak b/common/dist/zlib/contrib/delphi/zlibd32.mak new file mode 100644 index 000000000..88fafa0b1 --- /dev/null +++ b/common/dist/zlib/contrib/delphi/zlibd32.mak @@ -0,0 +1,93 @@ +# Makefile for zlib +# For use with Delphi and C++ Builder under Win32 +# Updated for zlib 1.2.x by Cosmin Truta + +# ------------ Borland C++ ------------ + +# This project uses the Delphi (fastcall/register) calling convention: +LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl + +CC = bcc32 +LD = bcc32 +AR = tlib +# do not use "-pr" in CFLAGS +CFLAGS = -a -d -k- -O2 $(LOC) +LDFLAGS = + + +# variables +ZLIB_LIB = zlib.lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj +OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj +OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzio.obj: gzio.c zutil.h zlib.h zconf.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: example.c zlib.h zconf.h + +minigzip.obj: minigzip.c zlib.h zconf.h + + +# For the sake of the old Borland make, +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + + +# cleanup +clean: + -del *.obj + -del *.exe + -del *.lib + -del *.tds + -del zlib.bak + -del foo.gz + diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib.build b/common/dist/zlib/contrib/dotzlib/DotZLib.build new file mode 100644 index 000000000..ed19cc9dc --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib.build @@ -0,0 +1,33 @@ + + + A .Net wrapper library around ZLib1.dll + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib.chm b/common/dist/zlib/contrib/dotzlib/DotZLib.chm new file mode 100644 index 0000000000000000000000000000000000000000..0bc7df76e407dcc69094483a6e9507240fe257ab GIT binary patch literal 72728 zcmeGEby!tR_Xmt0Lb^-3ySqWUyF;2oNq0+kgMffYgLESxDJ4jYNJ^JTHv%sx-r#-v zJooqc<9Geu_qyC%`^?@mpEY~UXU(jcS?6pdRg}fR004mg^$Bu)%1mlyL4X4QNEaZU zg&sr5>2QFIcf>23$bY-P!QUL1KN5iJZK}ffiW3R5Bgdsi#SjndZHoZ7pFgTx{Kvz zl?C`=WYS*WsmLox3SSrcy2a>U->NFfT;oBWza%PF`f;lwBm?q1PBTK{x+--^IT3kv zWsrnPVqY0p22wFe6GwAd19NMT#CmhT0wib#Qh6aMNjYT|ki;D7XOGYsNY&K^9UN?o z%ncmPoq;mu)=wO6G{*aFfr7n_EzsW4?OK=|9Qg(!4Rmv{u{Zup4&xu0LMrw^AV|WL zwQsr1_s9JrB4XfZ0FoHNo#>AC4@p@ATad(TRwb-|l-$z;f)Is4#Ky?U3TW+k-2@wJ zdNVU4khpqL-+b49mOKH8pXU?Axt4I$k})@=7c{m6+6$Wjjh;9-S<#z0T3Lel_6kK{ z(ESI5s;#ksBT&!A8E9{5V_>Yu@xs_Wvg1a4XW~9`%&`_aeeJ)((#LPDYM4 z_P1bvf^b5Le+4t$qN5&#DE~W}`4*jo5@tpG`?_U;R)#?PTaA4`Y7~qAN1&sbjq%T> zWj@XEAo#1spY)0Yt%3FicWv5~3zH%HFDNCT1JLn@j{f;lA>2&=1^aiq+%n<6i4ckN zzsTKk;{Vw>0`q^7yX^=5y$_%1{V#H?x9w}T45wlIzqjv}X#aBXD6{`Yp_+lE6Y%yC zvAiK_cU|-!MiDY_0MhFjIoaD^52PO=0n>~j#w7n)tM4M;$Bh3eRfG)Hzaa0~Gw=m` zs1Vz~;Qxb71J`(?*#1}9Te}8M!9+6uud=tc4Qv-omi%93Z|xgc;}Ido`oFdJ*2aN( z^3k;aM(sU22kdBss?h)UNBzUU1eD1|h%o%0g>FYzz#EiM{{OqwtqlS?6~amWr9oom zK+B)rBw)xPoR9jy>-LME3J7$1rTMP{_xx4B8EuxqoyY&}(72s(%z?LN30Ou87rAra z|B(4bBfn$pD4YKZzNd|U3Q8pBf8povn)nAnhqK(dWnmj*pwacbW_&kE-I^B!eDF&e= zzkBj6o3~FM*9s%~T{Et&W?*UVerwo}d9M&^{NJ?pzHvh~C_>#H{s#2jz(Kp%;Y`0X z@Dm{?6BD4l@?Q@N9w7}8yj%Eu9}3^ukhlI#J3|f#Lu`Imul>!!L*B{pj=c-S5S`y4 zuW`RxEi}+F4Eb+k>_&rsc--J>v|t0ge>Pdv`Fi@j?J1$rUSY<+!QA(b!HrIlD!<|P z7ylFVO}b9F@p~coG=qg7vHB_q7h1r3{n#+fe>h8z0>mi+=#_ zX%duU7QywmcK=kGfX+b6A00F_2Rs_*9zsc&h52vBsv-z? zxaaqOLHvF7!SbWlux6I~D}CYrCUa}Xurk*BEB#+Y{?RW&zi8fH>HjD2txFF*a=X9M z|4-;!FBN(vbAP4(3;Gueg|?vFU+Mo1c+XN{VO%*LcisJ$K_+2feY3f`rELr zJe2%;+xxr25HSWJ1O5n30L~7!4rT+I2HFJ51=0yZ?STQf6qqY$0th@v6o4OK0=U`# z(?Z#%dGKq@!3>E)vb-&IgQ7?o;=7W_=qr> zNUgi+?Ow4A(Aw1TcD)h#nk|C;w;CzfIGF#4Gu%WAB0HW$-1E`*YP;h!s!S#M_hj8* zgxr3T71aY9N_}U>dv)CrA2rMt#dbI1e!)22Z$Q*%iwK9`QgzQfQJXr6F2AkqJLpce zXn&Px?7JE8?y>*quMx{0VfuHY_qWJf?-jA59i{Lu&|B9PaYYk}@H?aZG7ch=$@^7* zkGeM!B8TPM>3-Mfzt1s|5nQqE@PBor@4d&jfGZ37&XGx4{})FVlcay&k^L5X>&Rjv zaql~_zo5T3vY33K`;P1{(0xZ1Q|25>e&=)k!hBagI?g&=^sZC?Ec}NJqsO^|#qK)d zPuwqDN2jyg_c?c%drU{qJ}t$&v&S{YhF-$JK?G>%WcvN)yH>F=tRbQ|p}HR-xx0dx zdfYJazlq;0_T)|EO-%lZ4aFwAg(%#)nD630PzpBY);E*PkEdixhA8~fCL8)6FjdK) z0gu>1tPrWYF>|jfRT&#=)7y$FjY8z^hQfD{ssqsBI*NK7EwgmHS#{nb8<|3M?iM=V zk!siBwC_R68|M+*fe<3}t4{y0Ma&+4@T0rs)=ee9*dgYvQ7O;eChVsC@BKLDR3}mW zZY6XR_!M92`IrQfOLS5E*Rk&7G})H(ik4)Z7FlAp$%Y z4&gf2#?j;^r0_j6e%mn^_g0`xVT42e~2LWd0%_zvdF;1&76%6hF32tv=dGj!U z1uoUU;;%KbzUf2&LnwxS1*_N_SUZ^5*jq7tSD%+$?|%^S;1CmL=Hy~!q~j7{VWMMV z61lz-V&Jxr-`6Pf_{Lii%x zdZoL)i++*|5t=&fa-*N3>gCP@d3pHNAOm#Lr_Lg7m#Xz(9Ql|at87Hcm8)v z@Si*TA8W$9;J}}&KMed~;12_T82H1$9|ry~@P~mv4E$l>4+DP~_`|>-2L3c!ufYge={Z>GIXM`auggilzhiMD^ZmVvAHsn0 zKJ~2h7aczvcilR8z|YX(O$-PC20*yZxc3480OC5w_?Mgq0BC@$gR!*)(9#wFdHt+1 zD5GMy>-6Th<_bxLL|OI~aW%-zV}ict{&<7q_VSmvJZ^r~@%Q5f_m_%4h5n>}82H1$ z9|ry~@P~mv4E$l>4+DP~_`|>-2L3Schk-u~{J)9;#M@W^64Fidgau511pq))O(ryd z1lkJ<4U}b!vlFh=$D7i8MMuk2Nz7V{XY;j|=6tiZHcmtQJY)|M{NXWUF#tfqtS<@y zkOZWYRRSyJ)PzW-rIW-?Bok@f2oou!{V6E}wf86Bn|cRo9k!a1=<6%bC$jZADJ=&a z7pWfWw>tNp1R$Ovql(VwWf2_s5U3IgsvhL#TSH^So#=o{Uuy^+Qqys*;DvUL}rA?=4`lbR=jsW0?YvR*h$HnNhp= zC!izu;7A+DiZ@kulAlK{n{*^;+WBXnvVm^`j#IMvXU-V}_qao1<69ICjx z#>je?dOT5Wl|%`3vbEPHG~%aFZzYFws0JrvGib&2P+KG9gm@|Na;`dR;@hXdF0GoZ zA-H|QH*e*41=$Iq5bI%HN<7~G#@%@RB7i{JIIaZ}5Wwy4o<;eoy+hDvrhjIDL?wm@1uB1Q#CKL+EnX#od_o5Ll)IMaO z7NBj&@^Kd;)<%OES%^J;dru5(Byz|)wNe231+*1B;m&Izkxf{~q>@M^K5oRE!sTob zc|{J+dp9AWy9VYkT9+9Xs~h za7ux3s^H@U1XPuqE^Qhl@AX5bvU0-YlbYY7u#DLoD@_$+y~NzrtM0>7+1`o^!%<4#Gz6nx%!45)1j#*6H%w}%lL>bkPU;E?AJ8F+BF#1h*)IhVyMi_Ov zsP^M0U`mpo15%jKwLnIhv>I@EEM%1`z#gA-uZa|{w;0Fa<;p*AlslXpj&U`@7sC2t z^zDl(eNUPt;1!(3LTitPAQ;BOW~318lc{z8PH}Qizn}}TOCKI8urso=eH&5)*=8`` zp2~o#l&9$#hnp<9m0A6^0!0mYp=~A0p6kv&f``RmG&`p&3S1xA1q#Z&mWDQ+e8$QU zdYCmRYx5Uo_^3Kpt2*gWb+llW=!(}qid*e*;K%r3yXT@z9M~6J6s4W)yAYFWe5HLK zLzt|wA*)yYu{qhsS{D>18jm#IH$G*d<0Wc!%;ZV=R!Zbb{^7V)aDh~#YlpjpjKM9N=; z>p{p}tsH%-GWJ_W?06|`VM8Q3<;UnLcV=dbQ(dHnG(Sljt7YptrcYv!i*oOTH}{dKWA=+9*g{ZYWJuh2k-7#a>5t$bF)tT%YE zXknN}yshg~aR3ihYrf2JAi1;`U>8O3G~wXHJT%z47}=uULl5)|GbC{@3l!y+B2*~f z5DjcU3lNj0L9LvJs2$yYo&PnlA$`0mw8lE44re*ay-w$)@TQd*clNAR(%5uPdB1zi z$VV@;e2am|gwU=bi3Ahc2-#RQ@Nj4ZR|M%yV{F)u1EjT!9~IyGxH=6o=bI!9tM4V9 zbj_g>xz2R!1`{swDfWX?J_xn2!x`6(1sn7`%cIC}oA8KLKFZ6G`1-{Mb%Gh{twcVN zq6VA;DyiF|ZA@EJ=2F1GleU)erF@D~9hw9hVXb^lDkhymJIUFHVbQAc(AH!-KEV8w zAjx)Vwy>U^Iw=20(<2uf(23nLxb!{&gdH4nxP_*xYF?fdBUT{!B>#)%AdnKLLoAd% zF)T0&Lw=ZSZHt59{(K>Bkvty(DpM`l82!)rC-3lEYU$}o8c0{qipkSGIh)_p6+1p# zvQ=^Jkc`a9Sh>;&={E<<*3Q65XH(xKGsk_s8o{X6xD&4X*)r4CLE#*tde3<2Ftz&J z-bRK2D)TE^O0lz+q_}32BSXH1giVjkV-(CZqm^v#z3`3d>Q)Jlz#WZ2C|%q+1=V7( zOL<5p{(S34Nr@ks)(@gEk0mIzP1K$3)Az#HKgrY=yXS2rUBJ+Y=+H1-R5Fa~QBCT! z;f*{V=ue75&_o`g?M=eV>fF=Ze+=&v4p)Cx6@aLwjlc>kTCyq1q@mr`ZM7q*a8^Ly z7rz}o$wn8ZUHU<+Y8&|JQlkt+Luh{UZ0GGW=pkwJ@fV_I9S-k7!Cuo$&2Vpl9RZKd zRQCZ-s|f59qfG4gNx(e7C8Y721+6zf4~s=w7U|a_o6;>swO!S`4CNDZwO@EKZpwjQ z@Pb_6ThX|78nr(WG{ROYB;F7^oFX=zE~dK9y4#dXex!BgnaRaZU$J?%%%?&@hbFD_ z%Ej3Yq2$%}j60QKxp?1@dHrs(8ZPvf(sVTU+E_+p@nQTY&2sr@D^;-;ho|sPO(8yoxcfqEqX?w-F68l>x{*l95$+F#fzj1+VJ-K+ktL;m{t$ zn*%I&+651%T{a&pFy@uVK)CaMp}j?{^FkcEfLYv<4xTgo(Wqm$#Om052eiCYmD5DZ z&ijs8rrC14S&PxVisY*Kk%D6meU3**RHOwGs&qZsrpG0M*RMk9!HROcM%3-mu)-(XZb)E($w()#z-L!EMb*e%#1Z&iG(gpF+| zPXJUKk3eY3l_H->hMO+$C1jVgFKG1?m&zkX*b&7{SCJIYlb(0r-{B6Oe9N(5)5M=Uak}sB*b)ZU~ghv z(IG(iUu5B<3fH9T^vKy~ats%hi{$1Kr^pY|L96c7P4Ov5#}w|2zlD{iskUo=IVpM& z5&@Ix^_sV=wO8TrX-WhxY#pk%*a8z;q0z?Y<$dMxBn;Zozj{YZV2o7z&>-DtLB`*fMufc%%(P`up2-<26ztjiYl_%skr?=WwAIm-DJTPl3SZ?3yXxi-;#GI?^qq0Vz>4 z17s=BFD^xg9QS3XB!9=mS(}0@iPiJn9F_P{+q@xoiB?Pdx_epH5dJ=0UgN)10zR@>e3E?b9{{ zu=7O-DJXpk$DfkL>3b_qCwqJZ(UJ*8MzM^gggLS^N`54;Yct-#~H$Opm6;`8YGxoQ}nH}tDm6C{>AWzyOt zc*q%{(5GjR-L*c-SM-qC8rWtpJ}eyPLfs2(;`=O)&pfpP?+S}`2*d-mA)Gz(@Ft?R zt2G~BJg^gwVe2)myY~)kl+hL5HM6v*|CE5I0N*l$uUwYfeSNjeS z`)!3Mh4u&uQ#rhcI;Damwu(b;3wdYGeE#~QH2~Q}43<5R`+2?}n;|>zyo?cv{eTw- zriS0vVZYvMCV^{zOFyle9<$auzW9~f7(b#M^>`otrAN#T%&-+lM;i#CcGV|Kq`IIT zf;N?5q-`97b)<>Z5tBoK^NWxKcbHM5957zsdeFKAo1-weVs;pe$jiL8B7qK@+Se1& zXa+-)2$2@;Eb2y4lmv>Y)31$JA!c467rmo)o3P%2aapVL?BrhZdYJdl$-%C~;;j&o&8+sIuC5Hud||g|)0M~D+^e+JPOja>HqYSdkF2!= zgGe!}hQQ_+Gkdd(J=c=$`tfz|1&_XOo>|5>oW#%Vf*atEtQXbgyN&#ESLSPS$QOmq8~BiXU;z6*+xu=JQSQ+JU~{t_=sVL>ii(V-}H6M-2+xf>cp> zIMCfb4tePxIM{PVzTgVEX~XBfSH@ArgQ?rgVuj+KEw;e1sYH^vCBEZf@jht=o(vh0 zn~>wHx`X_i$*#mR0uKVRmx_9rR7y)Dk54veWKQB*0V(P+L<65F)^;aRpkKp|uzBQ# zo}#0DW&>}U>Y9$o;AA+UuF9WZo{;{aJKq%kvUXhy@=*89D=Ub?a*T7eU=t2h+ju^F zT_5)2dY8%7pe$0{d=*6%?4Gze7XqdRlwH+q2?g_SN?906dm++;hlki%IqQRNO@&Q% z!SKZIOzqvXZ3rpRV5U&ucY9@~&?Y0Necd9wZF3id>w>~;lKJf8M9mK061%TP^D8Kb zef?xC;PJJB%t}etmuBPK6ZAmAKR04Yp&^}d-hxC0@DY`!5%Sq1AU0k}@zaS<{_efl zXBtzKcG?TAhz9f?RcZV09+=C0U0L^`zEC%$(&r{GWIUWFL1Kp=f_aO?8DHW53I-`u z4V*tDLS-;4uBl^929^3*t!}ClMZqHi{2n<)AM5OlG$KK6{1ii(a#N**5Ev=Xup_*I zEX8BvB%cD69?VhC-nAo5&*$&7D^H~kO6|04QqmFHP9^o}rY89F+v6*7?T|%yH4v}_ zE7|Rc_i_q_AM$%n)CxcyESmRZrjxoq=Pt^|TMQqH9t&kO(dBN?7O_MO`NhuVg&e2`KMd?Bt{8q+~=86vNUk!`z}G?0+n9sB%)sDV^{OiS*9!yH7{@mmZ){U%dVb_5R?MpzGt|H7&>z1wlHDwoin!&tU!a z1pS$dTb84Jqm{4~VT0ck=J#;p?w26bGjL)w$3pSqz17UwhJQp&f<52e$)-SwkIoJw zl3+6_my0ke)>r#ck&~DB_0+Q~Vzkg@UHqpJX6b<>II!X;$L}{tsz%|S$N!8RZ3f;J|*8y zv-j+r-|k1;Y=AN`lLUfxzTlPCpSoT%X|6@lc?;IY1ayVOOgT^2PUUS?)o#U^i0_9i zTu0o-kv;+dSXi&KzyNDt1QPnyF)2_WG$5e-t!3@@=)yKWI$x^$+nv9bmT8PRmo~bD zTUb3gZZ0YLI@35=QnR}on^ZU%wOiL+*w_`uz&o<4W#t;GZfYG72->_;5iCFmzHkm8 z0sxSiz_J;Anjg)cZyn8SUCk)h%|rk-s~&!~t{r>w^`p5;&Wi+D79=|DR7aDT0%}$$ znXClJbk}rfKOa!P9H=m6P(q(aKK_8{y+`dCnBfFzgtyO?}e)*?u*m%?G=5O*z`2edwRd!QC4AjE(XI{AQK2_nUv53>yY}6 zXY1or!u*R;p2vY6(a9ttr!Wah^~>vqHMv#|;cYFG!>CPR>D$x7>7(4Vy0WcXIZ`{L zMdOi2Gu)UBX-RrtJW^m~;VGc4ww$%#wNmA?CnLF%QyG~(_IfAiAJDb83#6H<)E#XQ zuNPlD*h$;|@vFy<+50j@lULpkJNe-tbg#!CXGM}dThN0wY zd0vvwsyF$cYcB;lFx7re)zbU6b@2G|M z7#N0IF?1Tz^kwo`N`MlDJc%7H?5U1E970xI&R&U>=N~t!|BzT>?G{ zi2LohH00cJBGqih8UXLB-)vMXOm3E3*_x>%MGb6Y*y6F)mhTS!iL>*b#!5PiqhZVI z$~m()Do1J`!oH-CrLC+9)HTDH#iJkwaWSOy-Fjc6o?NPaY;+0=vs?I+Cm=_x2Z|CR1tz2#D!j>Ky_mvG8YTe#^)P^=aWIVm1W+!q?2PpDdy z!?>rDk1u3$O-du}p_t;`9-r~}ifx7sI7ctJyM|jq=E%Y+ZHXdcB zD^_NV)L~*WNzzaAmMIcvsT0)5a$murA&+jb$#ZTbm|7gO7-y_K@f>_1uX}=w2i-cq z3Pgw{kejSq7cPDurWz?n7QAO!Up7fOsNC)kOZ6%f0n7IE+-wRwcoT0G;tFO) z-D^=T48wu}uwoZAI&#b^nC--lEY|;+K+tdXLkEM^s;5z6fD1eq!>Mln*iy&K(k|_n z41HBF3y`~EyqV0J<~){HJ`eWDtFVWNBZG8ao-{tJXhE7?6wKn9IxDDEEZ>{D>*8Jd%etAphHkuB|@oH-*n(2lBVC9(vdED#>(+ zPWLRJ5*Ngw5`y@2p;3Pe_UJ>x(r>Nf7auUlUg8-s^P41)A=Q=dZCpA!A6hLDt+LA| z#*1MGMjyYYqYw){pTOjse_3HF?t+M)T&}IaG?+S%vc0mabYi&Onw27s-2Ub)D4cg! zv2j0;48?)7!zjwIEmYd9mTo6&9S)IGqO9jjw-v)dq*XUur=Nj_*7SNoq8MageL`!0 zvh=ahxC!Zp)kZZU0?{*yOkC1cD$Ycwrn!BkS6oW_jJcl4!AzQ4A*QX05lbN2!U4Fd z=-qF@_K4l1bn6V*o*T-okqm#pPB+? z{(?uujG%lulY0g%vS13?ZExpbCw;v|ZPVT!z-7_e`l*Z%Q}ihmEkjcw)QY*k5@?3z zgSF{yM+-+$;8+kBO9(v^)9~_Wh64SDZUE=kgiD%|+x$8vZb$D!$mAfnCLfV2pPBka zXsh$GcwRb!mARyeN5ckNa}F3e?TU=1Q5kc0lBQyCI8#`ON-V31H9%9|#x_cZEj~tG zAH2g0*bA=kBxYBc2!ebgIWLGFNJd8Rn9iJ;lFOm{NFZp346wiUsI0G;DPY={^i4cI zI@8<-nmOwDp32#z_uHhSC;IU_M3&tvexDsqgxF3h`}BkkEGDu!mx;D(`bC>Q4ahLH z&4+doE0`V5H80hmcXz>?vI+q*w&HWnTiQ#4-y~r|M7$m)BxS&Go6kv90$D00N-P3< zz4?s;&W$~kK64y%dKg*grOr|DLA{}Ltu%&o_i1DoDsfWT4zh+23WO)N;n2cKWIDmi zUbup8~!V0J%e5xsHP@-#daiW)*n9C+tON1&Rc~%Smt}T>mS- z?vjE;;;Zfhe{&Kz#E3o9Md^CLGSqueKlR4g?6Ad0d{W}dC@;3A&ex~wqAx^0=O+j8 zoSH?vieTcMugR+RL8b$fjsF5|>nv% zxEn^)8#(2^009s{*V&13z&H9 z=*@0}=T0=^)#^QZHrcEYR>9P=P#Zqx%0ZpZzE}04u)l#zd(QQw8PWQoedN2vehh{S zbg_5OM_Va2DOu)11^5`q*9J1I%fVlMa)DlWpWt-{B_+(zU#IJ&lz_?0pGne~AOl^; zDN_$LN%cyYbPfu@dz@t77=x}Gh-#|y`G`(vf%8`+8erGxC=cKT}~!RUv|^lX+J+VF^7FRJIUc*hvsNK$Y+Yr z=`FWwRA)%e9qe-$9`q;_)uzR3ww`gPN>&PI!A9s(sb}Xso%|H9RZ!zfm+0VSyccH+ z!K)XJRQMZjRyZO+;} z6#GxzQqxEQ{VY#pc%R3A9DSYV;(2jMiErqwYZM zTvm6f1&%lib=g>dzUEcF&^HkmAB?!3nf&FV%`$Nk#7C}L zgxtM7h-S1Omi*i>+54-v(JIqg>Qs8ss2T9EUAi#=E!HnONh1p%KTxh! z_o^5o|N2P;7Y{YgQ{>@=pD>_0YAqLy^#qgyCnmqA;4CiV%p5n_9-a<=x&XtMTA>0~ zfhmX`Hq#5mOPMxA{%T|-)*AEyAjfSv=}R4)-(V>*;d=l+7kj~rRf*Fj*fi?8@aC<8 zUFq_9HFaZ`*{g>PxSg7!JS{SkGcbNNwW$PWae-szqRcd*L+Xe$g#Wj~c{cr$J$g#||a$w_zoQDn}38gsA#hiNTz=exy zcJRYD#5Uxrr&WOn$J(nI+2boL5fAJx4Ij&cDxxvtKC3Bddzv=&DpI2-jkw64qgORN zc$m=nL3+khHT^M(vnTp7!3L%JRAUn-odw!^%RaNL=Nyy!yX+9nm_kU44x%7X=c$S& zY%7e`HA56^;uSA2O1_HM2n{Z$Lt+Yk?86qO;A!Kw4Y8k8^q(AT^;FV!psmj0DiAl( z7Wo#b>?Qu9`+@MMN!nFQk}1xx7$rwbLOe)A#V5ua@a4mvHR0|tG(2Mm zdQ!tsw~%b}t<$!DA`IpY>xEnx663d%D%!2xEpv}kPOx>VQ57w18LH3fvxvEZ6NJG| z3M+unT*e<;5YKrZ0!<7G>3LqNpoyl6K&`|$8+L+Lz+oL|6-I439VQiuy$)BndftMp z8m#Ee2SvW!;v+kt@%*FSGpJ1eWHiuc2+ixo^V&hGh6*I&vdI+B-&Henmq^IiscUY2 z!$?vj{IJb5QjZb!HA~n%P54RpWYMrRTCGl~H`_VAj7WulF;G)6Ed=rdCG~z zxs?L3y*5#mq+|(wzmfLQn#I2y)XUS-;RT zxKe2?d;DaKx=Hywz1Q>vfB~a#UP7n(G+YA*+Y?)Ca-f%GG~%2P>nF2>aI@Ly4y5nX zsinVFN8qb6(g_#}_@c3TP&_0ywbf0t%zTBtEJU{5Z(O_?;J&pr1jF_~`6*aT4>zFNJ%Y8>&WmbBO%?!Un`jw`rG}8sB%ohe6 zbBev?3Gr@gmI&03t)mlNf*Ok<|8Nj#;T2^KY=TApTsc$5@sZ*4i-7Q_+>Zk1#+_#} z^HERFrc#S8-!*t!&f1uP#RiT8N-f?lvJ9cGFk5nz)u?FE@Ml(i%1=EYb01v`KS;q&H)QEwZ|;4l-{Y0H_h7?d#(eWX zjsKRi<`y2Dlg#PQy7^3|_o1t7p*E?=Cc*RWK4hlY4mfBSW+pkSeG+<6+ROMlawR#| zfx1nhOS)cDvsAV#(V*bHt^l{3O7R)q5tsZ=oKJg_hcAc>Y&$$83e6)w$gn%}a!Scc zSY)pRxs-AlqWJL9tBKmt4?y5gky-d3c(latzaej*u7TfV)Q=MeZSErBpj9E{#yh72 zCz)MW7!*2(oZ%>eGI;!T=~LMi(P1EcP27^WpzwgAywdn3%BR9u3~6ku7(!8#3!gki z9r;{nQENM#2`>FOG<2UZZ5~tUdSq%bZnJQ0i6;%CgsJ=9?aQxf9fusRiFR6T)YthE8G zwZgSCJj;X54UNeY^KY_Fz(6_=11D02I_b09yze(idsxM7tP)l~kZs zwXf6Nx$czClwA;$sIw>kR-U+NS{x@d2cG zS24YETRaWL2`O1T2uK86ngj&X-uSR_YtJ9Ln!F58>5)GT4<<!84SkQ zOLIE)@iKFXyA2Cl@NR?t%ery|_jXN3@?Em-u)P($$QJDl6gE${*O%=BT?IB~KIaE5 zFlB~m4?AiF+nQ+ybw|D;IfRC{q)MuW>1*shsVd~awZ}GrM{4dVD!~E&;_E(rXljg=B46p<*~w<^3q6PlI**kG z5~|0u8B_K{tgLGg8mfqhhSZD|gFpf>S^!^d9@BvHJ8XZDF_<|s|F?CN^m=b+$)FlW1`_;STZOw!}xa_pD!xb)x_=s2EP-**;NscA=+*hj)J4tl`D%=BY*M^|C~~82b3y z;*tt(=)xz`lHPBTzxGS;JX5$u4ZeQRq}7Cr7=48=fFxv0Amp8h)~qLsHmRdTCB8(4 zT`!oJU-KaMhbl2I1X&{}Il(1Laft%=keVULUYQdF*>A<@lkadUW>r5BVjhpl`vh_3 zvvl=Sk}+D4*b}0KcBD|!)?yJ9qvwJ5xf{#_tY3|nhtz$V`)PJphS5=sj`}w2f zg-q_$H!M$|V@0U=9QnX~#v182cI1rvoCQcn?uyit>3%*QQxNERJ6~~XSmmG)P>oLU zcR#1N*ZjNAHu* zPSisFQSFgCFJ*-s8J|CG8*;j^Q?xkc5P8Q z#wys7I!_gb$KlQ&EFP{Jm>7#b*en*ZjD@0*DHPo7VkZGcSuD^(RCz)BnY*X+kxX8y z2G6~CRv11f?DFtq=QiD@PV=~>nZcfz^M@zNsF}H??+Zt!uI%0H!o}YfEJvHjQASDC z1ecURu9tm@Lkn+vVU54Qa+{oA*U7%Glgo4Cyxj7uMlFz)e^d+)=2ZREvIN^f*poc@YE zk@`+Odyz|AMK~5z-=YKg>ZEBZzMP$)Ul**H1IuSF>IZs+TMpDh;PsUKg$+&|q)}4gfnM1^VD1R`q4E?m$aCmgIjnj^gloMM|sF3@;AEIA%tD9v)ob(lX^DxYp zOqxsR&i1W$haqqjen>bm;9P?7Jx+Ou6B)B}FdZALfa&ox7Q(hfHoBYXY zj+|PPsvMaTz+0m(h=8#toTFMn)-N?bq18v2&N$V_cnL0}hJR{lCvSXQV$<*a;3;|4 zR*7B}1=Z<_aK+)Vz4DZoweqy~l&o{OISFxh1-s3XUAI*y2=P+|mMe+nA)W^P&~L^9 z*Iz-S4(SX&85?-AR(dAuOL@MSAuP^zg5+nH!OumM0fzvE%mh#&hF&$%_b*oPLbf}6 zH-JJvtL^O$8(m`^r-5prM|#>oVG4(~`wl3~^|sNMw7ZQQp2|1W7?GiGk}-aJfH21g zYiJ*$vFaM-B1%X(Vts-sbh2-Fn#&hfU_R zr{ByQ_c?68!qdy&CTYJ$kckKyW09N()Ym4%>#-1=UF4RSO{7Y97@@J09u6Vclq?y> z^So{H=d-Fn5>-{1`b;u$MRB7zG$blBxM}iMa6QIE1F&)z?i_ zcRjDpBO5f|(9|>Gd>vF~?ulf_JnA7BMxISc)WO-F1-t7HW#qqA&&Lt>cK#He4RL9N ztMRRxNykAsAFucejDGFF*VY~WG0;gH2~FhI{^649EbyD3Ob%0MAIv@Wi82{EeM=Bs zX0)LCik_kK-LN~ehC_735E|69ktz*q-7YtVbB21nIt(JArHU{&U0n5qw^wk;;+`tQ zlmT&1?4*xWuwd1ZBR-_HXb8@GOyrM{FArx=#j>Nln3M%M&T9HJ8S!Fl)$vJF=B3o$ z+cNcje*g9}$6OF$8f{vU2pT#HC=X()u5?Lf-&6O87vTKQ4e}qB<3j~faDQV{VrBf$ zcK$^)G;7Qb)}j4CFDN3cW_o!)eH2^K^IUhqngUCN%YR<>nZA{JTzDt);|b$%+?7b~ zbeH@+_NMny5(%vPO(1#@48E+ek4u;8TMef&zf5afR2BADK9S!2k{2@?8)wPD^)S8L zS@_-2vy$eA&w1mEU}1)Zf(x2<+6p4@u^Ht__Al$`WtXrKRF~SHhjXo?wZGT_-!uVt z_IGA_IWcPf#MyJ4WB)?+3w((FiziTy@A5MFi>F2V5e7eg;LA|l__m_xn}K^$Z-KSP z{7C7n_$r(NF9s7*X?yIP7FRwsBnJDDbM0mc@0*OV5Zps7H}wms{71W9FS*}Eu3%o1RRY6}yG-xWLgCou9ov8y(EuK1Dl>kax9IoDgSPS3P57F(h{p zD87n_z1n3LS&&e!xK)P{a8dnEDz#qf=&C;eeu!K|l1p!ZIm~Ozs=ATwk=8q5%JNUV zmxFqb1k(mBYpm*e{dc}rG_M#u=5#*VI8tU1QRT7T;wPGSoK(o6-hF5CtZc_pl~sgA_t96w~mxim?(}Z&rHUb^CEPt`{tb zdn|BJLHs$3iejT8Q4p@%OEp*H&r8yw-6z2!Ae-{8pw$rr=^nLT0Tb)2T3PgUY2F49 zo_&2@R)cY73tFwXI}cq(!vA@xxLrXS+hFBYfPxRQv5V@M(0GH-yq>l z`^jf7v{Q7EQWBS7Xz&%(8>IH^#pb+trKVGnk3ryicoXAb>3U>q--w5K=+pXQEi5Ui zE(gUeT1ZMEY7Ojadm4F8ew4B(1h$$j6_ka=r8z!x8ofOnvU$3{Qs_A;Lfcw1i zk>>>x* z4pJ&AjU%Ga&&JBG|5pV6P6liQ01W`}Ne796_W)eZ&BTsIZ8d?Z02%;*QADJ1p29>3 zr!()Pd1hZ4Z&*t7JOoM&DYfz8nZSa@%&`n$OZhUM#_MrAs)IGa2jV(G!@!ZuLlnn8 z*UHp%Z%l?aZhH*9g#ma9kLETh`)m!s7Kx-s*=zBo4Ayx#CR4(<$fsIf)E1E79rV?~ zSIEdz?^>H}4v*5qPMEn6sPmgL78ifnIQ7Mrcl*Rz!34 z>G2@V$2fXT6|faTr)T&}PM?akOXsi3zG_2xFH|HRs=mpr1n6Cg9X8v2!w~P z&q*%jlPvJ<;;IeY?i@Wj;%QJ^Ysh|&(Uay(qSlG8MfHb{U+`SoVLPmt3#TQ-@ywab z=5QC?Kedr8G8XuGYs?D~#uqQadc2IlelSD$?4mqL$Pp;j|511P5*?=z3G1C-8mE=p zyN3AQVR^W%;;f}E&(%sH9V8)qA<(T*$PVKmex7(HtV zdp!obwlS~nLon>uA&9!O9P)k+Bg;bKpy)}%RyNI)+vV;mJ^EDK0n%}KO`sOhQ(3$N z<;jyWA-FI*FD{?$6h9&rO}Zn zSM0AK*6IR)<5T#QmS_pD=3XB1tHEa&N}jPAcYZRl z&E|c;B06bCohg|Zr0>m7K%qoAgS&-p=;8BGsUoRa^hAa-sK*r+@nJ^pV8Q3omd9O# zO&u!nFDzL{5rca9n>RBYpR7J7Frr*XB5z6nIc)3k<0o?LTW`dxZ!WGd7JgA$;Fbgi z7E@#V{`x=dm)dA9VZF+gb#2H($w{6D#Hw^HJFoM-!n9jmq8lZDHM3vc4WeTOlbNw@}bvErYEQ`^wyE z<53`bY+tH`o~-sjq$I!(22e~03-A=U{x+%=fSJKn4sb~Z5MDcmqnp><4nUA)$T+&{ zy-e5@#|nW=1w3!5KS)(Se;=52E@_xjs$TT`5o(Dj6anT2e(UDzxnkF;Uf052heK-L zLQY0l+SjdcfDhDXl$96@HH6WMLBT{EjQ#_Xm(9NX#u47|eYt!6((^JX^sH-wuc1Xs zV*ZLIfibfFe2)z}1O}y27n^MfiB_SzwwMwl@zY1-6c2cpIu78V)ko`*UNb$#OJBgk zWx(NeGzsD+nsnA090UFJJ*|;12vj@AXR(hym5p1I z4*e5bN6vkpjk_bt>?)iGfZujYtg4>vMkZ}1sy(FP-!<%m&};*-u?39>C-ec>UH__v zs-ut<&?LTn+U!z$+%$zZR#@`f8IR0Gy~b)vhetKpR8wUPJ5xlK^h!HW4uwe3SJC_b z0ark%zeE`52!J|0DgA6&aEOX&AC3v6E=Y42wq-lL_t= zlI2Bzv=vuVB<3!8R7<5W+3KezP*z|V169OoV?M_`V<*@T)*v<;>(Vl*iYb=To1>;v zBGMUL$70-Ac6RJcK*X>avn8>c#my&8{rE?bO7s3j6P+yG@Uo7Be|_(l{D_H`(lX>S zv#R)vxydTL{LGx0fK1kgV~y@jZJ0af5;)YE=_A&JVxw0L4V)3LWkq&go@OaL4JB*e zv87TdY zP`mM)IvuhDk!v2Zs#UG8s4f$W-?H6*?J_LNS!nm%|I`o`-nuQY98<_v?YH7`#S-&{SruCSs*BLuC7z!tCtD@%)-r3Bv075=OV-ol{N|`6h2foR>TaW) z(Co(+`Fm;y&lr;?ykg6niqF^XyVdGG%~m_>1-;0AVY4npTRofFPC&Pc<_@zG)3I=| zSlE25w8;DQ7#mB(*2jtq2;CBDj!m}6w-kQ+zTaqj1ng^+&3BnwUSo(p&S%*kW}UBj z@B6w~MaQ)&)fTF(hw!yKF2EkxPkCNTZEFY~5qT9lugXe<_$yep`u3H_-skWQxD63)OaWKU>GNjPM zTjpg>9+{Jt%F_Deaontz#GBT~o~y@CV-8&PSdgXJTH1-2^yPL>H);>2Wce+~!ijQC zx_!b8a+tejyue40U!*)IWEiC(F|N7a09uA4YgmCqYE-AQt9H@SC-EX&IkPi710Y+4 zL6JE8y>(3$!m|MP+OZ>Km{aoZe}u1rD0->}yJl+hy_%E1wjz|tt*3(-mZ0Q^b z#~MSj>Dxpm2vRNY?qnH&#e=NP70N@^w7#%;d8L43v?9uKFsE6JnVZmUR{8Z7IE=-9?qD@)8&P(kW`TXmgmG zP~6-x`*;y|IrG&)cHh5|Bj!8cWfo7H`&{@&V6ihk?CWb_b;XDv#%hv}{yALkBJ)Ww>xm5Wjv-y=J2+C z?`26PMlW+MbMx`drO(>K88X3lK>_{lqg+$5Zu0xG7nuYRdEEJTI%O& z{x7VU0xW`Wp3Ml)ihA0xX`ha(0?s=Y+-+gQ^%7t-wRmlxTWUGe^zSr=0cl{#F747G z=~Q(B!}Nysbo9U=VuvL3GVNc~hZ&*dXS)i903mk`FHRt4DQJXQS53K_)WWG&-v*LT zhZVS)u!_uzY=`t$c;DZ`d(Dvc{xil5^Ie5X`aK$v+M@>&wn;Ze_g>$SXB&;sJ-oq5 zD{xzbEgEXZzkl8PqeC>%7P0H6(-WXTk35sV_6GC{+X(voC~8*iZGnr&h>*&LYTjrW zG(BuuPfC*|>zaWf2~V8>fT-p8mF$rH@*t?|gp3(O6oSa>P^oWgbCoofeBatld^TY* zH;Oc*Cru)kA6e`2vXG~}>1&I1#UTtobLe`@VLB%xIBcLU&BU#n57HaChUKB8kM6+a z(~zs<=QX$IlAePepq-(FDhJNnTARkWNsokXMcMx)F|(Fygxt+z2Nj18A(;c#QkzvQ{@)CmEIxht7$1P-LEacQLw zb`w*gvGg)P6sz8G=b5||UvKbva>mfByCl0p(~@aJU2xNP1@MoVzA{OEeT?r%f@;d& z89l5h-u+=^`p+n}<=2C@z?sfsFEn?}zeLeB2f;d1!v)5^jxBKwctS(xXbDegI^9vi zb%4{8=66mnS_TDutDnYQA1bZC<`_Oqa<-m65p&DR(WwP)r~s#sg6VfnSPq+pkqVf7 zWpG^;kKl1sxpS3aT}Qp4LSjc`*bEHRVeJ^3W zG0Nx}3`#sr2sP9|Aln^r%9lI&igIF%`Z{Bh{U07~5R%BodDu6(vyflu+kVLU1bKqz z0Fbwn?d}`6f+-W&&^hY>4RcD$2u0?|&xU8&=;03WHn6QOyLt}&Qy)O@D zu=VW^*0ienKIm|6N>!;Abtsj@i_I9-(E(t7C29@S;?4Q9RK3J99Xjc;c37Ene2Q&X z$$n~*^^NX`xPw4CG{y|<(4M$lU8n=%JLb%oj*ra0^E<5W4>~;Y5xn5Y#y<5|Hgg7Z z5C|0mu@m+&7s9>PBLuO5UXO0!dfH&Z$#+;V1{IDpQaMg(x-~xsS?$T;h%}0<7FHW(6}6Zr;3N1(>)M z27p%yt90UyOQClAYR%0@e;kxYG;$FMu)KN}zRs{T@X(2BB#Sb`Z!vxaTdQ=#<~pk- zlfB_FL&)wIepTrl*w(^esPDg|$dVvLS4c(C6EGCfdYZ$eK%*&}^`N8n=%pLUSR_OM z0J{Or2nc<`P)Iw^V;k|^nK}aQGnini7u{6YutI7O)o0k?PLJ$e)gE(Fj#V+L024&=>-7Ty$Tvc*M2Bw zc}RxC<^Ve94_2BE1aE-|c!xD1a08Mv?oVzRg#5t)bU|1gl+YWd0ZwDZfw2zYTW{-- zr-}+sg#50dyXwKE6nNi>Ifa+}76JbSvmG9=OJ~#68YE1OIn++$|JO@C)tE6)w3W4k z6%Z;)>N1v21l9}dC*_QiJ`gblI34yxh=C5j!Hxv+U>83}B)yc&Xke5~q8UU0fXx9k z{s?wZDZhCL+V!AIN}%FD7>|O#g%I^Y|3k(D7XSbd2LJ%zI{*Lx00000%9sW;00BS% z06PHtpnznA2OIzZ;Gh5u003YB0002NLy81j3A%&UCgPtZ(Mx&#)MExgt?Hy+5xyiC z!-Tk3n3z7_Noch3H@FzO#4?1#K|1XW!Ec~|?;Qt}mZ)tQGvrZZ`B3v@>5+>qL;#!KsKG0^Wf5 zvMw4aH2~2(>sqkVe}e3rrylCcJ7mb%I>dl=5p{|mk@m5hVbc$-Mlo7{eb(5~RZq`? zSKgeD~gtm6M zooZWntb^OZ{tB1M_5OfY9OL|lEI%VDohQsGZg&l%l;d!Og~%Nw5?l-TZJ7UpG$bf7 zRK4L;sDmP;b>0+&K9}u{rLCb9m&29x914}C)9cmPYUxrqjU?hEdEZiuO;)(gSNn-h zf!UMs(v3OviC|CWjiCRQx$H*rzeJ0E?RTLjsTxv$VBYb~r?vcRN727sWS$AkbqF=4 zlf1@YUNzXG=tW=zN&_Pf`j&6Sq=8C3Yyq~%o{@w34Q21lkYF;$l){3Af2W=H1?*iS zZyoKwkCmUjvvYK$+vFEA8AnzvOUjNwj)BPz#+{zfR&M}&S)-t!58Jpdch%7w7rU5?=KUK&K4KEA;7GUd|Yr)V_$7cT!|0tCDCo??g z%`p`p=s>TIN27kU(^%uhj{ObTgdmi!^(hiWPr>}_ZBgY=2R#5H@nN!qD93_%>N*K4 z79&)J$b8ylje`n!2$N!3U*&=T022ect_5`f%co0FdBj{hy^!kI+>m`| zsjs~y0N~`$Q}aL1D^WkAS@_x^siHZ6GXMaT!2c)ziU=4FM5is;NDyK^e6SdeZ(T-> zf!+{bMh^b6bu(;c&uNmYpM2H3aqXcXZqSJQEE|y?-ek1bkrtG;8KljPGB_Bc$%Kr+ zZbxEAm?db7Vg4IU41os#Bg4awX9gG@8cfcCYSo41KKQcO-}_)|g)@qNm8_tEN!H=X zrx>e)(dQAs!OxarMDf92%s7dis3MDtzL?DqYf96)VZ^i-N#jTLB3*~DSDxj>*tdxg zxG8hC>Qk5sm^oZy(ejDiMexcUWSZyxD`}tqnkmnCQsUR1?@iJeR01Qki&nP2>x}J^ zW`~htr5J>B$f2{8J=Fh5Oq#`bK8k1*>q0`LQKGP1MN!@g3EhlH>)Ka$+-^{HLMJO@ zwpHpsO5P@uyH;T~>nb;XPSk{bsQ^*I{tTMP>t>WcmhkZnyQ+=hyzSLUdqAACLAdq; zL_ebpKj1M`z^_ZmhStrM#4xOmZIn_!kVq1WO%*x&qBdz6k*O-OWM#XZyguPq%meJz z?$RQCQAI45oHm@QcS!XRF~~O3y6jf=bSy~b(2sQZ29O3S@nIc8?TVQIVi+Q~zg3Ef z7_6e#fJe38Kr4nyN(uemNhTI?6scmK@ZX2qiJlBJ;V>ng{C8Fp3s_mCEkiQ8wAk1M zkL1fEJ<$14cZ7QDj^AoS`p_l#DcUak>ES2-$7;wSz5S1zgRlHCXjp<`l$zIk1Pm7C zsG!}45zF7u4pFnmT-`67P6VsU>KbV2>UDkIg0GmjK&xrMrDmck$(L|9`$5&QT4=c| zH%)nEyc0=d?%7`Rjq4YGBzjZwnH~m7+dc5fL@yQW$}?e_dLokIC{6hp`8E~70iDDk zl~8J)UT6)U!%NAKkx>iQKsy(axD9DkU9ad_jTlq|w?S3DqJQzJaTk;Tv=abGK^Xv? zpb7v0U;x^91}Xp-C;%wdGynh)5CQ-I05l_DH2?s8aJ$>}x~1cFycVa`(qa18iM^Y3 zyBzA*-uoYHcXqpN=dHTeRNmWf`)_*hdwspV_iDE^uqNLcYn5;W?>+D{W( zN&$D>9HWp;z4tWtXbb@74f&pK@7wNOyO}Mvwh&#nn(kh^+wFJP zt}R;>*0=8cce=Lz+@z997f~{hfH{x2KQGEsmC2ojA#5dkEJ`4Qm<_#fgykm(12 zJ$-+cOaucv|0N3(1&9&O7xM0Dm4DKq*vS zgC(g(l>8G1jC5l^XV$%ZHVK8;^tvF0Kx7R1%3xd)mD(B5$)W=f9+Nz!QfZxy(P4-r z%6pvb>uFSk%yu*>IaSpvEJ#^j*p;|Ae){|;dHX_}Unc7%k&TiIVUa1w#ishEPDF(9 z$*7`>1lKN=f)OeZ?b69`Q+z{#p3p^dE5K*o{;OL=+1rAih^ z#qx8ibVP_V!K17fFoxqCK5HjR*+sAliKEI=uu!KSuop$oc#uS4D;&Flg?1wd@l?r) zh^mmvA;IZ-m4%?JTvh$2#ga_gb3(P95b<=jlu)w?viGt<9#jjYP{~tGNqBW>TS2*& z1uGB~i?7NR5RtWY`4#t7m!8Q{SoD=YnHmyd&QB17(nlvy(NTmRulQ zf@l8uukj+6rWa?M&WUc1nU$dsp4DQ@?e+SEuPr_!ds#yyXbMAAs6fSwS0@4ZGj)7wyxJ6y zbk9c>g?gx7WIt}}SCc zxJGT_r|^1AO9w>i()(Qh8h%{Ly+JvH%)%r}mL+wLwqvIctPjVptel!ip zK?^Z$tS~N`1-__MT*maWYNG<^4<2gNb+GV%@KEVJB^x*XitN>91-BnHJ&;^CJAvxr zR=6|=iv*L?Ku3B?mbBRrWIH&9x!o}{7rg9{jQCG`AP`Hry- z=6PD9xHYSig}Rbe0C@Z=JSuThue@iGX&i9ciQAZsQs1mapOexOKqd=HvsBfV1(g7@ ziq)6Sskx!lVRt$bkYqH&s!%>H#{Chr6&J%J4(GP2vj54~zJ(+xEAE2r9AnQH{*~UU z{Yw4XxVf;oay=0m;Hp~8&|p;tiF*FVB^ni5udjXp$DeuuFa* zFYx*KlOxeL($pjyex*;UpBr1u{k5)axa}jN%3ZFJ4sHQ7Z8FksrXoGa3 zrS@++fi+jt#AY2!^oiC{=u~PnW(2Gss9Pu?JK!Ws{QyoIVId3^=A8`A7cw*0Vep3u z%+9*d5h7F*i1z~vi*IDl_MIX`D&Vq!hU1*At42HBi)*$iR?%YX{5GZ(;=5AsoDG3k zaV6TZ00CON)HT??oB}Q-($2;JjlMBBKKJ0b36gx7J=NO?&aSoqtNzwcw+1>G>%$^0 zpm!wg z?5TkDV>#`KYMFsiRI(ZN2Lvpwtz*d-BOTfBSl=iF94@oQM{40#&j1*^oPK4~GF*Ab zbU{JG#HSKECt?7Pz~P_3w?t((isxn-TF1p=C0^gKGC1e+EADg7fXP2;69ioY_&_Zu z8#|{4Z3nr7zzJZUz>c4eVy;>+bFB$PHPmk_tQwD7fQlWOl!=?$&;$QYHd0OU0iTcr zMEsl+I*p|q0g9O!Hr##in0;KOOW~;5I`B%A=ghVGI)_4@BCt)+T9cwABTRFX8{7Zd z(t#vrc-M_0flU_pbp)oCekJ?OdEQf>XKxe^k8&}7QL!(m=vz_IXrGPn?v?MJkfh{n z6MGKgitAYIGhSW6)~w_+NQT8uZG=8lx&a=r}XFu6EG8^#k(yr_`rJ8 zJufN%vSV{0Fhsdg=R`M~cUx}g%I#f7wYIJVya}>s`MP_Gbcf+qXwEHE_K4eF2j(t0 zIO+6T6E0VpgzEp53j^{aIxdHlbkuIO0JFu=vvMs?yXzrYmc{RzCc$J=e4e6YcRGzo z9jdOb6XTRqZ!irpud8i3DRB?We9W7=F`LJoH~T(OYLp?e4>N`ONp1LYcC%3lH%4>D zyPZ}M+fK^0=GeQBK-0A2$-~0k=yJLS%+k)sTbCKYWzLrAMD64y3dB4Q9*morR~rA1 z@ri?8G_zaU=lkOOu4miyUC@$Qkgc4mobrNFj&SXI*N|sPh3%+sBCCqb&7IySP18!U zhT(Jfv9OzVA+s0W+q@UMa+?-{W*qMs4e@HKKrdY$JFTv*hgffs)C!mCOcPmqvaMkU z69e`(U@B}i+5YcWx(c<_FegGG1+WJ)XiLM7py$;|ChiUqT6N=lW#X7hAv7n&6JW7~ zk7LsW$J@VPaDEcG&9T>%*FtCSW!$MU2OHAn$NcabfSTCr;b-{r0=ocF#S<)iQa6yR z&`7@dB5?o*PysEv;&j*(+#h{U#AAm;f{;TwfN@%4ucyF9V*#?#Z{h7Eu5V{+3xatjtS_Unn>68f2t~-=bb)c zCY0NTrfZ04tgGZdqk)twibk|)b+1YgR}x8eT~hWDSm((kZV?tg*vA)h7hX}KgvzV?tf3#e*%zipOe&JRte=jSK(}N=)@< zn%=wIZpd!c@oQm+us%#jBUQa_7ZgYo4Y;3)YrgVyOr-R@a$zKSXCpP&Zlg;Ike|(& z{*GbI%^qP>+f)N3{MAvfX`@x0RUvpn0Rg;4^8jz!%iJ2D$kduH>( zJGM3;U!lpaQ$*2P-OD;)qWu8o5wedb*@C-559UQOM8^MAndHqJZ~m7|22lS+tlHC> zd%mDaBdF)i-*HQWopsYc4w9w#0vjpJyJg<>OGF*0HLWqgi~%C!n&_UIn_)kPvTwEq zeG+hJ9X5sCbaA%LunF0KQXC#}Vj?!5M&EYXQ$G+s;6n9Hwmd)Ap=;r6wE>>aO8AokMYhd0Ix+so{B3#@Bz4Uh zr19EYU6XZ&qU5j-Ipen9FeAAiwxR=zhvklR0{Sq)a=77m&7}?MIeS2NO$hlVXau6x z4c%~`{f_{focR%9+q3qH;|IM%ba9SukxnrO;hrJG8d$sXH^hDb#XB({?#qYVe2y21 z>REV)C&kt=m%ubuHGFO|A1O5*LVtTdeDwFAoOX1>yUEcIc?DCZ0ICQk-5DeNQ?Ag zb_)iH@#3?4=79qD6B}f8F@=!uk!5@i`}>7J4EpX`!1fXSpCdkM5qu@ZW}Q6L9n#Bg zFGqq`Tt(`+HJqW43=ZlP<Z|SeQWfm%CP2wX_XBjcLc(*@*}jtVjRf|(^8U1X&>H)P7dgCU+lM@4mrz*Sd6^c-a!B zq-I`btx6Y4)$C%b+k4gycFPsMDW(H!t(Ld0c&%9B_4bc znrEQ}DH`8WU6e|=#!Cog%=jQ{9Rm6ykqcx-jxzQo1LmR&;ZNq+MrXu68USu&nvJvu zi|KtDJLL@6N@wOTP4@aVQRZ(Xj6c1*%8n){5<^VWZP$#p*5tQsL&E6HLm&MiXtc&6 zVrIMKOId3IT3;R{>`@*!E|Oe*N&okdhS1q^y4<$=4Hf_mLA1i(r8l--(zKY)-!Z?x zfx*H_BZh29G%0MkMX8(p(RDE+k-|luB7}j2jO*`OE?US@OsIM$igHpFj8I1~?RAu% zs)eFdG3s=qn3+;MYMb3W>d@czqk!%5Q6-js_@V|vi4KL6cqy!boI_WyF(#!u3mFaP z%68od4pbEe|IUYJwX`;}8yFDw^ldsc*e40qy51a<#SmrH>iNxR2%05zE6z7-8a8BT z(9Lc^I?$JwdHgpde{^oH^H;64f$Rs~BRX%{QUFnUH5Ly+}^Q zje9pZXCD)YxABkf6U8#%u&m)viNLsyDHw?dy&T-OQpJ@cqSJ@n;)X_{92^uPrOu5l zMUfoZL7Gyp`wWRRNeIZwb(&%B{EEo$sj&^Y4pvT5(6j$rn4<*1EwzRS`ldTS{ez@! zw$;xJJc)p*tnFr-{sFlv4)qFK+I{$0!?dslLk8Pq?~Fsg0%g5w)1~5AO+Z?!Sjg*L ztz3>e2o-F8J&v4(E`exZ4J+Iib$u2}Lq+A{_2N)by)gAhQG$^@>b*)MM-&Mdd7~~+ ztwF)vqN)_M?gqP5lUz`WXlw~V(UNtLY+6OTnQ@@c+7)F{(1Bd@l4wUPXrP8+T<+eh zLs_whXr^I}BW|_H?2}gVIg`-mW$yqdqDng+BHDSMWz-O%YsVZv_<2NFlWr|X(056W z6ONTRfL-t42)!$;K6y{n5ZMJ)V9SY;VMMq9<8@?s?}~J|KQVll5ftHZv@;xB|2!;K zbn|4lFwo{N7?P)-j6MHzLMZA$DG#o5zSgWA51E5&Ur*dtp^NZZzKu>bq7Z(qd4}qD#c`)G=*qoe~ z!tlagTp1@*{I1`g;jj43c_H)tWB+B#4f*hoHwkNR>^HpkFJ!rVlNiVKd#C+m>$q}Z z|BHsN{eyn=-tQd!;~AGc`X^ue1GE0|^2>f;)i3bY7~asX<}zL!y`rjMy zCB3iWTr)6O8CyQW0f_MCA+KJ?m!6m3BfVwr$G`i2Uohle8SZaBdD(ZIa1R~>6a0m9 zuECZ;NTT1*J&Lz5=8xQa=VScl_osev<7Rx212E>_oO!yT;AcNe+LZgJKiM$^75I#`y@BcXM zSK04@PwO$fZ~kqTXY<3LCotYlT;ml@p8L<9*8>hZ_g)Y4pVoc;0rUDOaYbg?6dzgW z$tCUtGjuuIpK@q_h%cODn8JK0;U_;O^Lu#{?!k)C^AIz;p27=q;m_E5aPS*%`14Zu zl#@8M-u>p`!+oI0^lN!o=qujw*w;LM+WxJE`TgfJw*C0Wt0R9e;dk6IJ@d`ayo#n< z`_AH+SXYq*;3Y|nfP{@e zg%^YY=?77s!1{&YLx^NTPY+2TkP;|BN(KOCX26OJ0PX>NlJ31~^LzK*HbANbZFO%+*17h5N7>qIFMF%jw%Xa`>ej`J+f!|1i;J6YWJeYe zFJ97)6%#&q5)WX801WU36hMG}ApoHO03i}YnkxY7J$wE4y6gRZ)-2o0mXo{IX1lRh zN;k5bH4_bU4G@_qV z)_5>D9(zh!WdZ_dA8cs5s~05piu4W~vCi(cyv+{rN?LWQiMMrd%-!~9^If*w?FF}t z>=kfE8+F_G;%Ptl=&NdhL6$6S%fqfWVm>2QRd$>&v63&uN7Odp1i`n!Jt5d5t-L<0NUcxLLVD0ZA zd&a8U>S+f?@!3o-c~M1Kz}nijOk!AvA^VGqVVg|{13l%BFIhEJvqhUst6Cbzuu5co9^Y)II@&JZ^>@@)9n5dBCu z!SWFJH4tn}*a(XmZfoS&@US5}lIxLn%r|7D9nIBAL@6gDsGKKIXc4Cn6pWz1e<3JA zO^Xt8#yEwbhy;ZpC<;MQ2*8splJCly8*x@i*vK6s_W4JG5j020Lr&6&mS~JlAt)lm zmVb;+AyFLxGNVMpQBi&xf|?!Oe6t^7L^12MoYIYyEGyqbMwUcP5)zTbMS({v5mB1y zBxI@cWD1Sq6oMiU6osHe1Wgno0H!nHwY(-iO^ud*?sRqR(lJ7}o5sxu+TX(Ic84I3zPNi_Y8279$mx zyq$32PXjWn(Kto8YQfb8orc>Dw~Vx5@jDS0ZzQ&=w#V&b*7dhe%4u!RDHy84+m%c&w*e4Hp$QjH( zzdOG%oAJp$c+)2=;Eq@NGadQc!!O$}yS16>)~n5q;T`UH5WJdjaSyyN0>r2xdXlt( zd8#ZL1<-}v!T-)h%mo40%Nn>IR8IHSFxuL@DJliDmwlLVcosLul-eB!-Ny&`afSw! z`rBgC!ElVr6my;OmZuzMCzbJSO08C4%HG6l_^J(MtMI@-oZqPKTBElwygR$`YhAm| zUugPsFN0ni--7983p=^j@q7B7mBg`^@csL+M42;JL%cm3ANzi_OEWy zr}B%2v<2UKL;~{~eus?0)1$y4hEsd_fB6rF$R3e;GXFNw5e^Hl9fzSFQb>Z+DWUhB zPX>$r>eVxC(J5 z3D?AK9v(Bc)xnY5?DX--7j~tIR*lh$w}|ev`Rfqm!KD|UcM~~~5y6d-U++mo>OVl9 zyKRlev5mL2m&$w)y__5~dRZ{)4c;%IRjwRon8N|+L@V=HyX1j zZ6eOnR-&+K+PZ7!2zr?UhFD8qpv9XMl0}fOI8600IX0&mVQrx?6U0!gCzIAYy@8_B zh=nHEn2#`EKSlcrG;*T{yzobSJtz;f7wlb;~cR9;#6C5>*3z`cnS0)Dj=gS0) zRcg8G)h1;^dlkDdf5NSwS1zn?RWYFQRflB6UXYttqfF%Eu>+zBefBWuMm-O)q}$F6 z!Ij%^SW<^FOq6~dU&#?%O?s1Dtk~a{CwA5c0-R8Ofgu@gsT_?=jksMz#u?%g_%s}H zCpa_hacu4A8s#q0^R0WGHXATm$LO3umpDJ{BV26JVQMAMx6A?9>7Ry}oeJDnqo{UU z#9qghq<#4H@r5MuW=PWlu3YvZjVze=j8o3<@a%L6xzlGBQx09qEE#ytgD)DuUXI>; z^%JD5))zGG&s#wg0*s@x>7=c@by!85nqa3Y=o7=Kn>QONx4;?qLwKb(E7q;Bdkeal zEYc)GE*s^3Tcn#r zoyWQi+dA~Q5USU88vQ)4CbXWe%sWv#D2v`S>K)K<&!Nf^m)nD`9EW;PfE1S^tSaV! z7WAF3+@uLFPN^?w1gOYb0a7yT#AO3>(mEUlbwL-P!g;53)Pt~Sd`If&jF1oWxtuQ3 z&wZI(JAEUa3^n(r}=d zQ;}Kr3kb0?SMb%ex{QmPFPCB>!9XoBGpWwGQr+YaW0a)g2!8n0ANobEDFLQLt?UrZ z3G+|>4xDW>ikMQ*Ciy{Q=Ro_Z-t~sen3Ah^qUQvqsIMwuVzDBejn|z!13L&W2Uq@W z*DQSZvuO+G@dN%TJw#`7_#^HA3`^oLLpu}d-7yFI^K_EYd{LVWobbVmw&c_#3Q>7L zwX!}?YLE-n$n$`#_VS6ef6z_d08n7+&0*B|>_X0RD-P(Pi4}p~s4(}}^;JHMAAXQK zJAP0wUFKz2}i(&`*b z8KtEDnoMho+0f_XHcOn1Ylox#k>aIit7ggT*4^EXKI6TZ`)K#iW}Mh0(k*6$ST!8> zhNWK$YJsp8Z=?tMOYsP91uIn7#d03f50*oDt99U?p2&9XxvQ(5y=vX6UCL!?DqY!P z?A?K22J4~$l|N+t5I z@REJ*SsCuB)ez;c)eLikP=uDaba(P*n3}{o6|sB3gMEAB(Lqow-Hdmbm7hH5&Wm~# z=uCIgo zuX%io{eaD19hT{6!PI-ltYzgUnD~-1Hvh0S46OJDK`0jHzwC&E1 z6#5<{Se?iR&8Ym`66wfP2ux}>y=9JB~IkaSw z?wldheSJ}!9~p_Bg1w7jf@(%pcB37ouj~MD?tfTCvPj3?yN5Yk>+GF}^_1CD)F@5b zJ69Ms#+!SHoykvTg7&wGi`7j8(Ja8P*XR2}5#{;C6IK}wgVsM!hb=gvzv@t#S+oh= zEBO&upVtGHzhw7#qA9@}$KVo*m@cQq6tHZon9b_W1pNGM*OWEO$-TC$%29i~Rc%G| zbM354a^^Ue>A%XzXicJL-MKzeOZ>D8ZRw$8VFPsrN*luA0_KY-3L=lz^vW+}f`?ON zJHE*5o2&M=WijDlk2?T_g`k)4bK%|IU)Ow!sReuYOSTJ8QQA4Iv)Coh!R}a7gfd8E zWg(sin_?jG3x)37Pi4(0K()Cio@y0ZxNld}SMO{!a7Tt>z04=}(e7@nZm}P#>s~GA zGvtj^B+^C}Yx6#!_N^cpnON^buy>ug2)b-=h~HQAqYEnNedM-E?bKY9>&_r^0dL9MK zah!%Twn`(?xDM2+#-Q-{m+TlZk?Ul$|Q$H89RslwCcsYX8hNhni?9n~g9_^(ZMa!++I4a#g- z7;0KjX^Q=1Uma)t46AM5_0EaJQ##qDkg{dZI}rs#_$0yzm>43QkV);5TWRe{Y-wz% zZaHs)%7_JtZ;VzGVPcNr=K0S9^&0Y$F#gNF`*|qrQ(aN?S@a!}?D+htrQc{K8%qn>i;~6pQ5SE}9<4+DK(-Xxh)a$` zp6CsrGeZhT4o2p{S9pMVaQ7jYW&~TSyC-TVT}BD|WUAGIML%&J-MPo%<*{Xec(8d1 zq;mc9guUa(xcOmA$&)RE#D&yYLaNz=We|Vq)5CmY)^WCVJN{N1b>QHItw5Z)gvJ0M(Q?Sc_1*)XWJ zBTVmsoG*Les*?R?+C&?Wm4$H$wQTt0z~oC><6*6X%u*sL_!Af4#bsL%1_pnU95`En zJp_JwVN_^ByV6>uUEm%GzriqAMZgCT=1O<|Gi6s?l$Owy$SUP;EnpZUD5@;p=Hg#F z*~LC%UI6-0RsAaH=>WCIGFTKmU$lZIxnr3Gj@Y@cbp7&1g)}#?)nr-qHpB^T%&M`! zBf;P-ZO51r6||yu1w@@PW0fDqfi`*Di_ckt@xNhopKnn2WlVe{eYICdydI)fkypbTSCUt5jQzGqc^t=s5BDS&vK{IMenXR zRw9%90`1|d$MDxJ()a8hy@sm?O4W-7O<_d&qcOCW0rgCMvY9~1!{I~%^7OqbZ-VzXg!tjh)n7%Kpqkh>;n z{$&w2G3m1#N{3cZJaNp77^!!(_TXmR!{?=6>LF2npn0J<1G+dak(M`y9_o(#M$i~C zS*d(I@~jzLb;SYIs<98yo1?0bIyq;#hSmcsNJ z006h~d$0BaKgGobbEGXc?MUo^1?CWXNvnnPp(89`q1e6)KBGMgA^cLZT*r@zhsm>I$CV z{LHCo^EqCbI!k;hZzd!lKhz1fO8&bMYCmMwF~QhTt{*DR&BgmvsVO-iJ;hY<``EC^ zZNeX?IxHX4;yv(okO(m(YCQ~n%jO2? zIghahl|CQ|dqwqnj7UyQ{@+i`%rk9v4-#h+1)cfAQ{y>d2BV^e$T2XSm&T*FM}81- zv5&!$F0`cP5sinPjafj<&2St}_K=<@S9+l1aonPUU2eSffHC6WctLndtSYRU_ z)ft$Y?aPAcQ66|a@okhtx3ClxuL@XzqXwu^ITdq3hYVO@lo`zjwXI{n-SP>`M1`$^ zx_#Izm&4Q0`Zh4w-~%nA$y<<*Ub$el2Gv>4n55UE`3&aKlm_fRwswPr9;A~sSoqju zFQ>^{BAabDu-d{f$z_5(q~^sV4wP0onhFkm6DUmP<} zyYxAqvE2oNM<9Zr2T|+mhx3>7)%q!ezdHFRs}O2Of8=?KVfd#fNuU=8TN^W=7hZ;S z!SfwDOpUb)h9G{pGS7|wo~7g320LGbIBN0?^aG9C2H^Ag9DEl$qwn6^G>uC2ww{ZS#RF*Ai-nMb}`&<;y`ce@s)zJMa*i=j?b4E`a zHTy~f_?93hYoAav%Ih3bPW?dFNT^~3mV^EJQ4@$TWj;#j#|E-9mYB_pRqzfnV*qFs ztZNM_yP7LJp%o{mI5Fxi_nI1^yjzB)G5%p#NOC+FxSoRs&n-O_Q4L5Q8 z82xPt`Tfc^A<{RJbbV@fAOJ38y%oF?Cvfpmqj&TmP9-W+8>pf;SQ(iXmK*10AkCj* zJJ$$}@6ty-6l8GkBAGUOLzz+HX;6O#RAYLPij-i%ru7&pn3dt1Ol8Bf1;-3+wG3Wa z?A3+AVgoGKF|!UMhUYG0JM{==#CtyI1`rtuv!$vZfR7s4y%HPJwKOLLsaqxR^=J@( z^Lc@)JOCb699i~5$qI>Qib*x&RxNOTj0>RB-Z`qUZ>zBGKBlM?e@~U^H{34q<8%b( z?Jv6_n0%S9U=G}0GKNT4%pg}MHPjmTG1L84@~X!m4c4EwNq>;>XV#Z|)H)WgUK!_{ zmMnLI6bE-8l{Ab*)6ZvAxTL;sF;5BS2pNK&p1jcpB!pTbl`O$gLsIInmS)b)a|x-2 zV&$qA_~$|%<&}QcE4CpU`dmy80r~$lV{gd&f%~8Nz@ULA#TVri&A^`-iTk4n zW&l7<9ey;V!$s9Z^0rh&f7a;#B142LADBWqC*0wOJO6O3)(2hP^5Kp<+;E2-?zqDa zciiFZKhDf#x3m8<1ZR2GeYpkU_XC>F>EHjanD5mG%HJ8!j?Gl-K^gF72u2;vWbamY zZ} zvSKN+At}-2LQs)5o1}GYhzhm2P$(c9B4RBfmMt5Ua&9hSGihQIs(fafP;3|zN>f6o z$ST#;gewTf|4och358Orgi#PRHA4jBdmG71pEb5vD5*+k1u36~C{)dbQWeGtbvB_2 zQf4QbP_Pn2K~&Za5n0$MrB7Hv1a4g-h2I;kC8(hAN}`nCSSce4((edwA5mbKX&cH?!f(lK;EA&Yo+k8mP3DoihyOAV zXZ08((|au^5(LuN(snyRNjp*Nxdgqm$lBH>`O+Y4yPNAv1i`ewwx3RrrvdPG6Qr8s z8*c=8n&4YdCy2DpTfZmBwAI|dCkQm!xS>ywX}`IEO%SR*xbsaAscFm=U4oIC2;IUb zB(;#bh);oPAbCxct5*cEt?#{8g2an_7F0pxv_E{+$lQ-7-D>3S5KV;O$?!a(n{Y&- zKWXrUW914A6|WenS$PG&f)mJ_H&((-7Arzck|-3DL`j&GN}{AB62&D^C?<)LF)5Tp zNl7G%N}^Fr5+!0%D2bDjNfeYsqL?H~#iUUZCMA+6JfWMoM8To?sW0M*-oz7AMCX&< z=M%q#Cnge&4-SP-3CF*GFZ?S%1E%}feG;1x_udf5ga$H_a5VsT2LJ$5<5)vu8WJD| z15Nfs8XEL&*gcS*n}1_>Hn7;xjPCLlaNmX6I!Yv#KgH86r5iqNA0jF{rp!T!yNu zhA^!28{>W)2njew7<6m%&5*+y1q461A*>ds3DKk!H54^cU1@2-a;~QxP*vYubKgnm zpDB`t?^WMG?33Cw;I67;sPA4{^3MC4oRw1<2+w=(*~M|^^WA#G%y|j?#OT?Wz@J%X zjQ{}@6#)PM5e-KHL6l>N!ol7csf_umDyzIntJxRs@83c4QP%~M=Fa>2L8m!DYp(08 zdL!-g30?jYGu3=^a@mLa|G!4n$@y=!=itLRJ_bdJ!`G1Eu3fCzSklV})kw*cA^rv4 z@7@FO1F~LQh`bU3q&*u*A{(^RynsJm__){k1+Vkw%a-tN!f9KZnQ}x;RqXWY_4N9? z#ZSC*MelCWJNc{d?cL|)qEPuN>wNFJpeea2$Gb`meHG!ppD-1@wEGIGx#!;OQg7DZ zzV*mbKUe$DK?Mh0r$HC`x8CfqraYuDJR!qybVUz6hF1JP(E|N{aXkvgcEG&Rtbha# zZLx?&_)%yv`H;bLELevZ!ofbe;f#fASkW6ihJ%QqNmp_Dp|hnYgS!Cit#YtE+&3y3{{EN@_ejU1|?Qk5gGk zO}V?=(;!Og2(rHIfwVi{_MKu~4?JXU-(My5U|_U<d6ZVl~ZWZIklE-Q%gvf@?9))uPe{%_9J0-?-44kA?&@OnYo07 zmehrX=F~8fEPH|91lH#4xpVSRJ1u4u=bv35rz0M>MADyXKN6p6I#P^kZe5qUrsngn zf5KBl097NB0#*BwomC}C&#H(dXVo?11X|jU3au?k5>$;yidNV&%v!Sc)q^Pe%}6R# z%}Fv;ElE05jYy7Ge*G}ivIDa0efdI6?K4VL%}J3~zrCeXO-YKXzV%bL?WQR#pWXFm zg(dUrff<$^-`Bn4JBw92eXUHqSRNjcIma+H_N`Z-H*2;pR_O8z!e{?4bDdE3pIhIW zZu&><=-Ez2s4Vs?dN zhS^?@2Q*G)>LAH7swL{kz!D>CLe@yL4g=MaJU*Z~E$7E?bpU2XQbs_Oozo5=n~@Zj zBm5(6vzB3gEI%U!z-*&6a^9KRVBO__LSr3H@rYQ~$l4C+k2*6xaxmt(T`jB$EjjHn zaEVB>yN6m#p1#guR^pCKupTI_umklGh?bC@b89tUha~Fo!6ZxzdT3%)_CtTIu&q4V{9lbLNgm z_GD?0gBaJS&VeQ~v2iUTcjt%26Y!hUF#Vx8cH1k{lt&gyCL>|h1Y742OxXvnN&!S`pY1sjG zwui;pg=L7sfA6Rp38DR~JW$C|FxbpUw~%#432zva{;mSgcZqEuC#^<&WbDvkC29<1 zU*;!p4$PV39RHfei?ZSm&8obSA7ZGAr}9iTHf$%bJSqcyj}eck;J%Oc3gfQ_?qH`? z6iGzdTsi%kJle#(7tW)KO}eWUmV@RSG5B_I{c=#`yU^RkXYY2^@Jz>rxy-wDZhV4$(D8mNewstJQ22OP2YEa zKg`?TW;`#uh61-uV285emkmafGFC&mJ%W)Oo)E3&vzV~Q8Xo%$SGa^6`TEJ9Sn%q(jj3sHZ^v!m3E4xVOyFCT4b{x%%!PB z#J_7Q#8)CZ;C@cq-AtDzz{^xp(DPh_>kAVkMI`$}UoJW(#3(Z%8xsD*XJbWi0wEPK zB3T*Q!bee13j_?r-8V{8WsRCNglIE7wDXn*K#WSfot#6#t9GTVX zltiHcxi8ZKs9co8V2fGj?LVFe%Zu}o`cB_fHgGz0C&>qNJJ7h2M~}ocmaeg`So!UM zOnvEvZ<7Qk=(SY;rgoXqQ`aCkGcRjx=9?^;#G2WoHgr+cIf}UJu7{iW{(u=&)ylds z+WrRwxUMSapS*i9c7O9VkWNx=;{(^C_%om-G59U-Y_}cg@m>g|`PEod31PlE7b;YH z7-X0QCA(*+u~&euF@FL588#1C7)^~iw0D7c1J zlm0$#Y!odA;GY-OM%3G&l)B-!76(JeuP1*}n;W|8-H_c2yMrW5b@J_!&b&=Bh9h>&~MqsApd5TCOAEBuXLh;T>SX&B5K^3+NF&(5J@rrD8KuFAuBNEAmY3CC- z5J90c0fz1y7{iftJW6OGhv$OWpYC3~_ufFruNjFDPa|`N6wC=G%pF(E{+-Mmcp0B? zk|Ea$q|+q#A|aEQY0Mr1*P|(~*eJbfush^Vq)28 z6e2N_tDh+jwc0aR^H1EUehi^1(tG*ZJR7y=!YZQ2Rh&Bx}vCpoR^&;$c2;SVUiQI#KR?E;P-Yd%8*kyc|9 zy9-ek>@c%%(%OhqU|_AIOFAM@;dt|^*fvmXRb`|BPv5hABI$6d{FSq0C46+IV(aZ9 zW>be9@^Sqi#F^Tl6#3dz;fDG7x?e>>ktYst*B=iG?O1QHNeq03bHLaR`2$0qHH=1i zf6R?!_cD@Q-#@uWSu@Z39PjM~b^Aetl5_<16&mX@4!u3Wx2Z{5GAS#kXFBuLo>p3i zS|lgFXz+N;`_h*%JRPKTHTG*2fHFFru7jF5hxJJeL5M4;BQ? zXqHNR!Fj>t^(J+MCb+Nec{k4*vOBW!H9ehq;tfnmoM9TKUeNmcJ!EsXg(wi~cn-?j z3@j4?cU)zCXUKR$QFV2+)`GaWk^nxt|2-7bA-Rh+IRx}+H4t@|gh*gIVwxi~v*7I% zMfD{DU&y(IJzC^VJ%kGowS<*{^~Qt7%21}Q2;oEvy(_M!w$r;v+|6SRSH~t+G9 z)}S5;#=reIB?I?u!p|0hT&QiC{tjnDT`&SdNpCzOuLhXPlv z>+2)SXl7VukmqJ*XV@Hgs~MS9A^Tta*;Wo^)joRvkezdIwi(A%IVWj`$N|`xuSOl1s2)IB>cJm@dX$&2dZbWSJ^pGW)vya7 z5Ult+pt#}Yqc)7sHQUp}_I#LfCwek3l#!0{^!Y;8;*qi@G!Go7aPXmhuMb{2I(ZR3 z7m^eA;b70(PRRrk)BhQ96~oDZRzE{=Q+Y^VZK|ZqZPTzE^!0k7G?4L=lN;*TF zhIOvy@j@YFcrCfCGtp8b2E=;JZsFL>qr4g5&$7maU@nG!w(KW6%Vl~KWN71BO%XAu z^D*tBC`vr}=CZjMV^#MKCd;LA;e2Fss@L~`?k?a%7R93Q2@+Ox+eAWWf!_+X|8R$eA`PSeI^TPw%|2NyXhi=O|6f$gNk{={V5`Ig74wRn` z9?BAqSQ|-ZIX)I_z7PivZ&_guJUBi)I4nC{nd3NjIZV@hockcRJISh}J_4CrO^+(N zDobs56sp}Acm~+bV6?gemdRov{9vpiI^$Ug=2B8+vfyWBI3@j<18o(hgziPlj9Yq z^YC*(#L3n|c5w$*o=Z(gqoWl!!_v4G@JM0nTF#uH#0jf|N~TUBKr&{Wah?|rZG>E; zsH~ZjtleOCaY7Punc6GW!oo>tvBR4l_EtKwjZ>c>%#30k%lj7{OENY@;KUTq&FWX7 zpwotPw9N=>O0**YAL(dWu#C5M^EG}FHaW4f29C4cWxur#Ivdzs-7Rhe5!dACCyDE- zKuwO75!}cB1Df64f>rzGQg^vsU74ul1JSBqCj768HqzDCzKmS*LkGbx<;pNHwQDGv zYR9{)GpIjO8shQNS5@erHQ`=vHDk}oNm@_;DLfg{7WJi}Y+&yCr-<~XrDQaLk)Z@6 zB$kBH2`UqqAP8$l?BQ7aDzVLVZr}y&3_C zv8I8#{WaV5?M{J@_f<6A|7SjfZ`V`xY#gTIoEjOrQkH0h`*Q^i<9lPZxHIazn+@Tg zt*?CjegDOs>QPVqfB<+rf(ne^_v|X#QOgE6c)r;2`n~IA+Ozr@3ZUOF_h&X@KjYN< zQ`NTAg|fpKV8H2o7?OEDh1{g)Yjtr}ZEhrA3&_2l?y1R}V+$B?WX9em;c-&!I$%k3 z3$ksKS%Mf-+VD+s*Vp`jh1Q6JrUgy*dY)qI^*}U3Vy~A#w#kzFaks?H&5F!QSDYCf zdBad=s7%`esZn@T;#Q`N0vvfM+1b{1r>p~v^J7ji@l>#`77WHld*}Faw`+#~K~2FC z*M@O18i@l_d6c{FQWJPf$DFD8^FR6EGmjka*1YBtwP8@*p9M3|IWQ=r#AQY+Pi0*@ z+vxNNkzvEGymf#fA4w_54tJFnPe^!)3nc?q{PrRchMC=cg7 zFyr#mE*3u{A(<;pwXB-HdtXjSiIwOmOi};x*rcC|1sO~RO}FERMH1584Db25`o}+v znYMT9r~IPa`OJaXJasakPTcZermgj>vdW(81&szKUgqmy^X^0o^{oa`hTUntG(!A5 zh?!)g@Dl`vBy*Zr8aHIrbHIZpW7DmZFFpLfrZlAzY3*TU`(YUJEH`0+FxI`tU!sXIC!4 z$yI^ap!&o6LY1f*|2ORep`013LL94-{jGiJP4&S~u@%eyQMmffxCaMcX!uy|jc=7S zv;$3WvtRPR%BA1PpNRc_@xgs7U8h-lKh-{c)%le!;S3`55*>PS z1Upr?+1cR6!pGW4u6ZBX0Xnm-6^UCy3AgFf0_fl#s@?dOt5Z_m>1^KY@uMk8kPl#1 z_7dCrSt zHtN}7(a=h=z*!UQ>6NMGK1$wA3pEmc724~TKLFR+ZK+W~tlK+zs4Bv@w0QlM25{<^ z0*5>g;%HR84oy4oFAb*Y4(voetsn4x#N2$j(v~!1AcE}vw`=f@gE(cW{tVl{( z@QzOSVvk?bh}PBZ|CSzV#ysc*)fb$@79@$5v&U=z2HB z@TXVA{+HH|kG-qt_I;`%rcv|>%}0iys9V@cq!Hp(j55(6hy}G4_RQ4Z8ww^S=@<-m z=nK_w?L#xK_NgWytjdXDe}3}*RXZ3POcCRWj>*Dei-72nl0Q6`R!j-q>A+=P2K0WV z9UJ-$mDeXhOAD2WEmS&GL_FF>5_8x+Lb!5x!6B#RGlV12#AVxR!8fy|d1?F#XeAwO z*a@#e8j~_#SFD*5(4IgD)~&E=jCPt+Moq9tRh*WWpKkF4(8MfN<2>eV2LqR){WS}V zMemN_V(1Ag5K03Jw8~q|76^J>EwRKeb z%lO$QqgyN6X1gapno8{I#e1N~DAExAf8@F8&bNI zo})Z}?^fFl|S!<-=PJay|Rz?Lz~;WVK}%=2v3rL8M-tYkL*lSi}%K?Zt-A%z+t z(6@2&^X4{6cQf4;tjneMnKSJ?2tG7?q3%s^^FJN+D@GZq_BbEs=7b(!5RG_|%ZViq zJ;<>P9#t%Ex1X2j)^qGunI$1tVMg@IOSMuKV$~dP)}+XcZIcw8pOG+z&hxMS;*kOC zxjp5uOsE!kY1=e1axa-nlP^@b>nYAa^jjhwj7kJO5{)MVucKY`*CoZG;)fSR!j<6X zud#5BQ*P z0*ZZqn(WS-7ddP(<>n5kuz5o3wREcniBm`H-8ebDIh`920=q#lDb(W zc;~j-t_%us=LHm~PZd-aKFj}x64@8n3b~^tTE9teQVDT~;+HimERZy(l#m2|NE9-( zVlZ(@7@aC&M+ui#CGHm>Vk9~g3};J}ta~3g0oij#_7}gI<%}nlGW!ryGdW~6^FLV- zjhHJ5`zP%!5SS>v!z>tNaP-yDhW#P(tf5Sq78L$?-MR8O0?zz0S*b6vlRI)rhp3NXcWhduPm`#1tm7f^rP;6!%CCL6;4n~>JjH0@iz z&M>C=GX3jwK|wEdA;|$XE0I5NazLW z#?iq?7s1DhbaK(u>-G=D(}3GyZ9&|i6z^3gSUga+g`7jPr(hlraRr^oouk-d zmOgqALg!j)$}XMjYe0aQhksm!JjP(K&KB-d`9i=(_z1updJNdO zjfut#pir68(O>}pnRg<1Tppv5{j23?%=5wkc0iw%Xb7fPOaY(?*G}YnRE@0wQ1i}e zRE4#wq$)gxcJ~T&nyOr#3h5i58ePs|J5-*^vzWk6yR>F)_51=WUv+mkLeUDvq~pny ztLQpAbo8x-eVyTW8gl5Fgo9Y|i+Qq5LP4q0*>M zLdjz1*qCf>d)5(SP0Z}8(`lVd$e#4d8jU2FAY<^KvMH@?^LMzw<%HYtlQiaP$HqeM zZjYxeR?a9ctL9AFiJ1!A94`w2`l~k=olq{ATcN=&3M> zZn6qc&!BO?d!crO0CXbk5^Z`e-G0ZjlL}ATUQoKoN|EPP+`^_u1^gwIMzV`jPfxZ? z5JrVGV%Ev%=9?$tB_+{MMk{B1@?%aA^RW9@%4oK@BF->pqijTlb4SrAcDlERcqgiv3_+qLe{CiMx&4lD$KWLw>|7P|fQg{t>5IH|5x#@2g+uwgtgwN-+F)>?CS zsWyp8^6UsUl~1eC_<=ngl8WGNsj-rt3ddzUT?JhCQ_-0dLeM3-qb$`7uCd>uKl6Gf zeB){Rud-7VN?+XjguLrq&A;ODf-VV;;E*I|1Eq+N+}`&Lvw+{E8JGw*jnNzx4;7yz zd`~%B8WA!21f7_+FU=Ebb_R8#Nc#NB>2}Sc-6)^g_lQ%Na=l_QH8>vWrtgSPXbFo6L7G$2j{|k4F z1Idxu!t=wMP(@D#)G8?tnP}NSs_%H9DC9jKfVYj~la-+J2@BFBC{rP4tUUT$DRe`O zvE@7F3VbFh?wr#r^JJX+-kHDqQGMxbZht~0MN9tVX$y!d8zP&+K3po|awqvtq1>;< zl8_`pagQ|;8wrtL8T9|548@!8`|!*xxV?bYCpHDCnLdsi{={;MDd?$K)hnItDW1I0 zB&%;~`WIL}b;i>0$B{Ri02HyHN#4t;7RD3LlClq!crEA$#-U56Qn#0xqI|t5-SA4I z)vn!YshrAYw0LXl?IyOfgfIP}bTk&yu5)y};?xuP8uc+7aiMjwiX@-^y__c5;Nfr* z6u+P|=;Ed)Ep+V5m1ZvHmwuSINlG9`b1ySB*P@f@VaXnHq|Ey^!P4`O|9!N2hGj8y(IR%nEwAt4T^oAKKtF1x4{Jw4Wv+#K_g?l#= zn1n{0_)jWnCXV0a8Y$m_t}JJtJNCTn_o(b_#*tAIE~2}Ergf6@?NkUkq6Ev76U~F@ zb#2#u!N_vZ^vy}RXd6ryDMNLCf}egg=Dc~}RJ~f2O-3RrCJ5S-(>^hCtqSG;+#eZ= zj<5Gm5mga1VoZj8>gf?^tx)Qy=qee?YL`^ivKliR=I^UjyOE7eBqi;Pq}-OHXODE} zjTKWiby2Rh5n5na>pzd0H1H*!qy$}+r=Cm9?~()(F|QNL|9X0Ww7*nN_|r@eXS-fN z+*{$6hVpgR5+2-gSHMA2XzIDYke8wzW0B8AI=mk<7+O%=LKXfMvg#$x>kHPF6A>6q z=+mCAvsBW&-gDx)Gin_oKeMHf*g(~2Jq=qErbaC=Slfc_JaE1ygP+- z_Dtk6(ow4V>Y9pZCl(|r@{G%oxBnJ4v}LiEftF)FqdA938|l7U?g7l^=h|&miTy^L zK7lo<`xLQsg$mll&7|uvqNd2_o@-BwfA-#A(3w>10MclheX`G?|D=*BH_*ul8s?BL zg_C+M^3@oh7x6?>>~rVBOB+WQwMyVj-zaeuL#W06Oxvu2peT z3;r_wi@W+6WVUV0iS(4Razm(*teUivD!9={WESw;DfuZ=XdhivAY1&;zK=@T$o zd--3LU`(ZY@dof`YR6 z7C0mCe)8EYMyC!SB&D~`t&y5wnSOU#x0(sqD}{?MhF?(w`Ky7!jxK7@;c_&*3X< z*Mz4gT+X8^ysxakQ-KWlkAqB?r&6N4g^_;C4cF3)_hGitfXX!gp}#4dZ=2>Od4uDn zUxAX-=#pB(Kwf3fhDr)G-{5EX(m&&HF;dqsR*y(8NOVP`0Y>SUF zG=F2`<3Cnr(&_b^$>~V``6k9A3ZqWjKcVT85GP~&awh>s|~!PaZQS12r>AM90_-jb|kl z5x2^7D#Lz_vaWy(JFeJ`IFqo!-W6w{7xj$^pi7J(E|YO)zzxfmRs*oBONAqodTx`> z5;6azrx0JQKM9k>b^K!_X1f$=>D_OCGfwzHXVCp23U`PZ>!m#*72t-w9oBh|+IheW zkVuaxBO)h-xSTg8JHU8bcE$_#GC2S}>K^gdwyj}1$jSPbJZPDgf;36Mw-E`3MdUBd z#34!9x|Af+P~$Hv+Vr4xLu%P_KmZrGwaIH299QV6%YUHBgIGd~>@hnrGP$>^ds2@x zNR?>d_#B593CH*+l&F~M+`CdB^4036BE#$h(U;FhG&HGhM-i907U63`e^da0CF7y8 zY3M{*A8q9Zyjrz@(Wzq_F2@WT?DbIunWzFtdQcwsOtn66G&yf_R0Q#TZWTC4$Y8s6 z*sGe~+D}yX&if5D8C_nz`PUQ_O?B@wfd3;Aw9ygFPM40+`IP`SGJR_2%=CKNwmJoy z@X5{&%T}$z;J(JLqM8rQf<&PO$q!4)chTl(GXnd+r~Z4mi6@ZoIkASU6o?BSqyqzJ zj(Y^~ZeNj^1-TdtX_aOBuBxHmw{WQCaGY*WJQfbMI2a2!C&n|P`#Ch6S>~j%OL_-G zX9Gy^F65s~`hW{wj8d&*>*dv7$MYsI{e;lizV!p9TR1tNEIj`e#C``1mx9zM{jjb7 z+5-UPK@ifIwJWp@++|6*FwLlDD}+wthPZ;Pg+YBZ(Bs594XB}$^w@C!>bMZm6nG~M zoF*(a09x}L#w%t?=;<>QkCoqeC|M+qS>0QatO?&^Mo%*9_1H~or~SR$zKm>7Cv=&$ z{m@o)=jN@0e-dKN2D%)}z|veztZC@noBzyJlbPABdZvxFmuzi_@YZZ}J47*C%@AHT zFKY)}zhAS_dNeZLe%*5^OFy)ohK6>p`zB=8J}Pys0KXqx@&#)6Go~XA=^tZcSMRKl zax6L=GjWFK9Iux8&5esZNItH4Tey*G4LvboOtnUuMyH9;WWI7;9GgblFedPi&N;X4eTO*CTjj~~0?6RrR1s|W70QpJx`xY`CV5^XRQ8aFl z4ED^`94(w-D>s7get79P1)KWK(Lg~)T)Im0bVG)5ly_)aKN6_o>gfTS7(@NCeAWtJyUlEUuSP{R6KE59Uc^Ex-5hbf?Ym91D z6bl6HGI4Y!uU?3Sd@ove!fXDd_v&B@xYk|Xy;IIz#hE@)NwD#`E=N%tAbZwmhvOTL z8*h!($#pd(H@<-JxP1v*^*Zvo&})-mT-kJ%wQDA79P%g>ibV?noEqWlA66rY%2EvF zDU5K5Tl86ld1`wu)3sR=`eQl!kTuy6UWUW3zAf^evF%|PcTw43>R$S+|1fOO`k5k) z8i2gQ=`nX2ZWCnHc8bRU%h}yOCIFz(kP!^Wpk7-@yS>t!D%%l zSmMG|NQ9N|PJdgPwX)?(aYZ7pT&X}|RBq7Sq@+puY z#6N0(i~Y7_Hd>?wYfpwz_?~$twW}lBAn#B=p1Yk;ZrEe*17nx_8SI^x3}i3%J-k1w z%ei&kEPLX!aCUE8xDKt978%3Za~j39^b3 zxK=dJBZ5B_mvUM}Qh6k4fb3Lj3qYrBETn1H>O3DGG()!Yf6kMy5ggSu$jIMpZ3pcy zSLFLblvJ(i(nJaJMRSNQ)#MRjSR{-+96cZu57@QtEXVYZ%rDhqbaV2&T)`Zhc_bjN zxCV*ky`s|3Hk#7~SCye0w>2M}+RH77Qd$m=_?o9yPTt2<8!TC-)RrKR7<#=8e-IrB zT>Y$2rUXa4LBC7KazdiXt8*TYwC#vAe0BilC#Z`U|w|IV{LG zl5kHcNa91RygA2|fC3~R`wvA@+>0I|WBeTJobTTUja+-fyz~JT%=fE3y?b2a=gye+ z86L+q!H8Po4W7QU;#qt-+uTs3gIcmj8j?_3RLzwZoyHAu0>hnY!|4|)rM%7*ghVA+ z_0_O(op^(n-1mw7NoK~K zgt}S$>$ZIfP*I%q5)}iIfDdf&7fpN{sp_&%>(3TF!^}&#@s5l2`|Y%dO@A$&TQ!I( zK;{_dB6A`F*- zv2tPVGFw*ADuSad)E?DYLSbK3EaGj0F*a#(m3O;tRN8@Th{^LyC1y5k7+ySAY1wIf z+3&F!2bp$e$&ScTG34#(dZ&GtXA46%^V->Sia!MbFuzr4?bi$6dtCM-% zqFOLv#nQ!k+IxV3_Ri2&5>L;4mK!}U!Uzle$^p>kc<#Q@g9k^N*2ANy?J)WNCARBns zXDoR&0lgo)jkl*HMZn zZk%0duFP=m`)@WNkdrX^g6Saim!5q^4S;APweTreZO&38tKg!$l}g z4M%`G(tDcp$Cry{PAP{d#CbC~I1Q0_Y~J+{pP^uRvLC8tp4H9BZczt%+JBHORU~pm z$)Zd+a!8sfe#9q@^*?*}-=ph*C7@$59&t(c(v?FCT`q_M&@~DHD&rRSb1xp=Hb}|P z3%$vNfNy5jgIw7Mt5ur3W~njjBRyKc@CQ#wi&Of$9>7*v%V&bOf6BLjSGl~cZ-IPC z{0i^{cExuA_a`+Y^caIHl;a4EvEg`Li)V8y!EuW1@>wO_^UB^OvcNK}GVqyO8Clk# zZR)*Y*$-45v3D$}28Nrgqe>)Muq8n!)dMPKXCXjd8fCh2EMD%?P zzfba1aE?JnM>tp!7RFA>WkpOAd8ueMMS8@@LqtaWd%6EE*b=c1l8z9UN;IJ0bqX!W zJ9p+p=qOmZ5)Ef9MnnBQO$_08xM{lxl_HE05HE|am*n3dM#D@8bJWu3CVTSenT_St zmxSy1v!nU}2)jd0RP0`zukJ|}@4*W^Jxw`RA-Dhxxvak?BaW7S*50%oPe)q9RWaIrG&wjmon8W)M!C(9X-#Vl;gtC>^-Cqeb2m;XJ`;FQaG3`oq+60Sy zx&K`MQ43p|RQpjA6XaI^3w8T|NNbzzb6uz?(UUS)a>ym~VKe2y3*y@b8anJ%o@stV z*Y-0}Eev$!kYYo})5OlgmDBhjX`{rQqWQWAHqdq{758F9dU= zx-W4YRMY7i=@b-n1m}Px>#cCurQ-(Bxn?cL64o?T`qpU1rAz$0dbbMnMUy3I{*Xrh zw3@0G4kG6aP%Q+`D(94u5as7Q6G#MCt%w`p9BJpg7PPH?YiwE)mgII`d8YGNLUnLb zN9;GJi>G8IW3Mwla4^jC=348{)5_RBT%6M2+C9~ZYWU8{rLZxd5G)NmjjGll5S#wj z&c$Qz#Sh`!9HjT5TD=1y5qvuP*kIix1hTj`93cbOM2&Va+OZwvBG$2;@(iZrN&DnR zvOwBwALFZXT@#snRUwW-MY&fMN@|u*GJuU4p(<@vY&Bagla|VU2RVb9BG78`=&9DL zi~7WCI3cxuuVij{_tPyhDBvk!Am-slxFihsG7*X->$W`2NwSz1l{sUA zRMs>G8b>({=NE+eARx@;P!J=5FQ5bfXbN8@B(}(AVDmtrk@W`-W-pSFLR<$DFMf<< zZ$sSykZwqy2;V40f4b}o-LQLD zk6L&W(lr4N`28v~b%QO0x^Q#BoXDjhAoS{llLO?(K0mqcC|iN>ccqaKmfrx$`?-o& z)I>Y>=-HkU6Ep&U@dqpbPX1|Kr3DeprNL;NhV|*%QQ#!kJi7UrN1?!-xTgE6%dy8v zoQu0mS0G$O6OKJ-u%21*OMDHv{0xd1Rj8J!J;Bfey~ZnrLXcauSk^Mo7ZUXa2&_5u z{sKj-9-o_WnIbUo(A6rvJdsv@aczczH6Aeza}KRuTcFjj%xxAs(o`Dn*ijaW4nm@fRAhR2jD6h~kj^{`@$=g#Tf1oHhg zYZ$0XrtJhm`q#V)qqYK@YiKVaOtu%hiSGkIWtA|!r+b7`bJ}Za<|Vh~@+Ctytwk9p zpVj8a^7BIL5Y8Il{iyF3oFVo_QRx-_$L0rSXT-LDB-_22m4*#Wq?$VoUADu~@y-E? z;Uy=dQ{|K%i}$e8rIWLMY~$|Of+dr5ngc@uOfyaFhwmtvpK3#tFpoF!%Oa*LrT2+?V|Lgzb3phF#n+HwT? zMMC3*i~+;=c-%bc=j40TpVk9%&ll&)o)eBb3|f6N7qjuq$GBSbjM=%l?F4 zfoqexWYa1{M?U51LUS6zK^c`E$iz_zLUc1lre#79z1Q3g$=rDO?u z8U{VMTdj>p@*8F8-orE^%rQRtQz$^OC!ul|B`VVoFK%wQhZKpPEP)~U1_CW0>6rg8 zMeeb*-);JH{0W&gn#%T82a;JB^3Y%_X!pshY4b?we~5pL*M`VBg~&WcmPhcoy2)!6 z%#|ZJqtJ_Y@WE5a3t3ucU#zZ@`y3T*mpHS4zbt;=R1E6{9zJvtF(SOg8NEOSuov=RUaXQD4WP z#PbnV^wo0QZ0KgRLX{Xj9X{%QxQ)kV^<0B7Cac8as$wW3+$*P0>2h7Y$5xue#- zG0(BPHl@uPAdCteD^Qb5lOG24_W*uV|w4u?c{B|lKSlT>HY zQ=l{Htyz!D9=iLwPb=u=I5Rh@1s3MyW;H;`t|mnB+62XY#lwvOJ0Zm0CHY1>_nKa$ zlyrHG5vm^Q>0ElLno{O2X?oh1fJ?g4rfVrpw<9?Z@R&!fz^`wpKbO2$=Pp|1z+H%R z@QrGYD=X-$KIVx7ssv}$o~WwIZos2jj=+0e=A9|(gEjLE3k-N&LaiA2_0rv7uQk73 z!WWpZm!F|@0il)6*q`;Sq0a|d!0WhPolLc*UjExK~k)fpe6a&yN|hOwY@qb%tgD}(dLCFG&)sSery0)1+3Axy*= zPIW>}Am4Q>mchW5Tv+UsDlhL>!@89iO3e=F;ocU170G~euLF+x*e?Z2kAok@xS!a| zEMCR@uC79`R*p@HlR}JcPlioJcV4=7Fd3Pj2_*5FLzTIF^*5PEOu!K;QNFWnCBnYm z_>;-i+{+qZO@tbV0sM^*Hqq|Q_x*KPfWLNRTOBC)*n#h=Fm;gQd>PpHNk`%gpR1~K{>|&P{sUvV zN0aGGZ_5SGUKTz$rs5g6szsf1 zir!+~KxEg0^6D33lLreo2v#S=g>0uy!4sFO&Je7>VEF>HLiF@a%M7xfm0xkFzEs;( z^vPSh=CkNhU|l~hxWEmeHhQ^T#gU`O2Xj9stTW;~ znb`!;es{g9S*(hg?4FmENwyg|Gt66 zt1fF#4PC(}d^*D-z>Ik&ns43oD>wu`*j&o4C`|5+;k(>!2)*rLGj>%A9I5P9-u@4;)P+fOvG)=U#7!!JqbC~hmswo{k_d#h zi0`4NQk}l&9)>t&c`yxxL2_V3kA00qUK^Z~hLDZmR2uM7MGa`}mvZ1x zh9KrXMcW^yL4I(yqOrFa6dA8G5ot1TM9-sQqVXkqhGM1jH5W#i^^8V%w&t#!06`DI z`UgL;4O1%B#7FP!R*dYh7O5uN8>Qev0dlHpN`hhq*nL%+ym-Wp^}61joUZtn&DGe2 z6R|HjknvX@KmSSV$VbEA1?fzYG0&QF8PXM98)O<)?1HTP|DdKExRqyyPqnfp^zp|I zZQE49I_g{~fZ+ld= z0VclLPo(#+KWCGWek)gTNxze7l8j}Y*fx5=yGg7_TEZx(l#z!%SG)nq75}YBrQ}@a`l#{3dy&CC)tdbt9)o{ zM#@)3CQa$|&0|{n51S=A+Znyr>Egen;YsVDvYnpn{iQ}* z0=~^NnW}DH6~0Z08wmOkXX50lq#r^*%uL^yG#knpbj@m*rtgv_;`dv41>UH7FaLzM zEo>aZA{l;>8%>L)+!9}}#UcE$j7rI*b1&Av#ozq9yP@I3TXeeUZ4z3Bo6 zTj$9LjUd!6cT0DI%)@sFP|n*x=LjGN0C5uluyg=5Apmdy0RM0AeP(;+*>CvJqf+Ct z4MDrZekOciOfAE`y_>z;)AQcj+to3rcjYIO`^pD9chRl7)X_=rR;<#wvbPG;MUA5+ zAt6g!SpY*b05l^2W>5hA4Nu!zuWoD5O*Tz5(13(Qap9@HR<@whItlA_FSiK_*S2Ym z86mOK4%-wZ5Tx$fCd!V1wzg_yQiTvsR1rZ1r!q#Prua&URFn9DM}knMN%ornBLDz2 z1_mNT0M}C$#W27WMd!xY$IED&Y4;M6&I9H9#6nBe{F0VwyrPb-@>7N(S8$NVJ316bHlrdX>N^!_+y3%-TvCFxelPd_VN*!T`52q7hf zY;Yk|qvkI$3N4uS3*Gw>ld)2pLL*Sh1tiLE-{I}vXofE#c+8t$SQOth^0HB1#?n>8 z1LOV0UB&NLM3-YS4svpf;Ccd*0j$; zu^#DvQdjk5T?;bnzsMS_!v?aMj}SSLdurdhY&I^zMAGxRZzJjtuV!Zt}>A^ zGV@q^vPN8$iqR}?;RrXxY|?mr-=4{Y@Qtb7AuyNZxfp*ZZhs;0M!2P_e5l9|Q&gKO ze@P-RY(AkZK~Tk1k?agng101n`pVzZg+F8ulI2iS(1T&(8i@IjL2Qv6$8KCIU9u8- zEL=NorY56AO2bq z!BiGZ!pAcsej&hDlT>zOuZlNOqbi|RF$!oGWy9VwQmpf_>a*S}HpPcl`nry4r+U-t^1 zN+H~M2IOIy^qzzljfv>($y8`i&_dy#?F(j89Nb8D7C0cD*YUl6YM+pIDk|eLZ*id0 zzoO`yl)JJ4aYdRNIW7Jb{$b(i+~vZbnz^7;eVgwR8#6R15>u@X(sz$fmsC&&nWLtK zd%gI@Qz;zDq&b=9WT$$z;!P45ifD~Zr0V-e7*Ek5e56)`8_Kx+^RK^?dB9{GeU{_S zaz4>>G%?Z{bV%muTVD&1(lY*knunOFfqgHD?T}&!s&3th+{%3Rs}jXa`sc$UD8os! z3M&=~A)clBH6OauRJy4gXGgUqJCi!q=vl{Nvw-ie@G8Usvw#!Z!6L(JaNG}263NUM zCtx*(&AO2B7>h|s%-b%C&_Y^fu@Cj}mQFjIjo8aazccwKJRa9sBwLKB&Wyswvr_z;x(b-4<(cGUTr<@o-9x3q7$67a8vcYTg=oydHl z>2o%w4Hs09Ld!wL9`eC5ma8YV_00qC2Hd-26)N%5pGO)|Kv z3O-fM@s71u)iew0WU=QSH^|_}ZOf#__SfT)o~+1y?PMZs?$*|zKWZ_1u=Y2mrP`Gc6Jl#=*!c4v-W0&6Y~tZh1}*Y*|#7TN*4Qfx9Rqg z%sA$?*}cPG}c-h3~oSQhB>*u+VYb)j^VHGU)Wpuj^>9NK+ zIerD-RIP%oo>ndK+pQOz_$z8%QWw~o)w+`3=FZB$VK1@zp44OxvG`AA-S=r+vFo!= z>}v$|E!UIg?n{1iFz)@&d&t>jZpxe^kHa~Y&}upd6URE@{RQtE<>={W zSSDKNY2gWky6A_xrw3cj5Lv-XexGfS`*5vK=f_3z#9gVriu^q_AJP?}gIFi08MWAA=OHdaao6qLnzEI-A~?t)O%dlCEzFnop6svD!DT z7Hf9)ZhK>7ZGLFk<1nKk-Ike|LG(Ai&-b^cBRXhd7Sm}8bwVL%=yJOq*5YSlEr~ge z`@FI&b>b`5rFw%gZ(3jJOi*g%n^b+-J&+e&70U%5>QZL30*^rH8NHr}c8Kom64A`Y zSl5}XLGJ(|QtSeR)ChivY<5Jt7`^ge3pXax4%)N1T%E9lsvY~)(T2lUWR^TbOUaE9 zi*1Y(u3wTaW9lwfm}(b1(KEujyrgma@Y2vM8_*aZB7@_!izn?s%dNn7WFr zIj4zPk1UFo?tX*eKp&bx8>m4Uj)?mzp&l~FpzK#GQuM|?rxBxPAU`UfWh67|aH zG!2Dv z{4YmSrnyNNa0Uzk1HgbVUd3&qvW^2iI5=P?=sgil!JCS7r8m3T;tS?&h@4PFfJPiCOt z%y$9B1XbPDE@Hz0=3P5hWe za5P4o7P9yi1somTdxjta+8AC#Iow4o6s66M^5_O<0mqB&8BdK5Cb*n`6%r(T*YXLT zVvOH5U@`cHaKMUY4}e<+&~VrQTI0AhRlcCGf$tU!CNUZXF;cTcUb2>|8w=ze!VFx7E*Kf z7hpiZfIIa?O%?zFcs^$|o@M_0wD{3Ix`AB=LhU6Qt^ggG-AK3e(YZjes{^Cs6RWBG z-~mm0aEn?T1y~j00FZum3&VVM1K9=8=^zaE8UlBJy49!$hoa(;3$y3I>>6f%_5;WP zaArdB?=^vfhn#OHc$V5{D0u!}C-2P*0?f}was|MEqZl1;_8soIq9=?NzT|&qt@s0DpbRtE|s&VD?PHwN?DFYF7R}86_TFec<5i``d1!46D4@hqQDSJCmP$%}IetNF*^_-9KLu7p3D4y_6ExQ}})??<*nKBjU_ z_|{P0{I}hZDl#y%RIj12k*Vn7;Eo_y_@as{>Rs)2t68=4XxgrQ<|;^{ z?O>498*>mDu=iV@z>yHx3T$nTcXSO&1u&KS$&JQ4ZSu6%n12sVE+Z$VPkTSgAjlvUPb@0py({M>{-r_!w)v{`x(iDKw%GEgWL3N2C6-$j{BF{IKWPZB^#wBgjR{@k?M*?jURSwoU2i-K}8N z$nu&p|2@4r1GQr9)xqRSu)*YfYKf^Du#@5DaaC&2`f@DRLdpu-shNa`tew@~^3ZfZ zG1#O|-1O5(^trK1GnAURL1aZO#ID`#X@AU&Cn?CQ*tuXM!xgvQY)yBNN1;Mfz^(Ta z=;NpddV4NadePH{7BgCol{QS;VQjvs%dfE*K2DBy>SlSh-6O_Nu*H9f*`tEBqq`RS z2A{pdwHqN)eecuaSn7ycS+4V8h5ce4dFGKyaYsQsf= zH*m`kl@V`Q!|uzg4e5u;*^iFg%b+Ua;Kaq-Epd2znybAchvin&WSEs^L*H_;0E!C} z&7g|b$&Qg(7V*4;lqmMfsaO8SRX+J^usl&g-fgNuSr7sV9`Um7MioJ&IZ zvCK`$4utQ#@4)}+?@E{-kHT{x|MERLZF~b1wg$Lbrm^7R$bplmCZtoaT9foA|LV~V z+?Moi5L(box9MsCD2r&hpm%K_r9&q>Tn)^obDL}3VkYD~m*8X(7&X#Kexj}>c^o^% z34gz3>h`^ojKsNhxPV6`&1@6?=2dUhSV|v+{gad^tuYQ|S>!CV?1l=Ka)k88dSftB zWOcb-c6qZ?{gPB_|D)NZwd}$MbgW|n<}1)YQnKr%9LakL-_%EYOZbl^(3CRHXxY?M zTN(`sIV-_%LU`r6&CEKGY0x^}D(l~xFfaauURL#p6}Lwe+Q!n^QNKuA;$PlNSm_d8 z!?p80BdZF4`-vy~ZX#3vJ4jTJR{Q#|M-%=q-r>--Ir)GOS74P%?Y-JfSm*yj8j@~P zh4zGKrEgD%D=@udxta|6ZwAzMA4ZA7PO@$ho@w9cwN3b5&+(ogJk$Aq`A$jQRm%2P zdENKrDU^Nkl*+$%N+oB7|11*EzX?Zcl2sx}_f6w<;#Pl`7h=O?Z7Td*32ywR3E4+5 zHIlgu?PS8XlxwZb2rb`l?MMwm`f_CiF}0JMT2?0Nh7Ej;YA61}90{+L;M26VePOY&nkBKR;;dKmG+I05&Z*@S zPf1Ud>8de1)%(s>5;IcqtaHTT(WBJUO?FZBj`voCuat;wMt?@|au*u5HZaB?B&Ad< zEX?@R%d^j!5?d%vXj%z}6Nf83PbEIpGtx=b6Igv}NYaq)ouT6)!I_04OeEovT1BE$ zwSgWjzmX_~ZBS0IJC4}zfrLzIBs^1XYPo3RwdKCVQu2_A-A6C{mHtg9tabanchQDZ z86njl|CBSiq?xLasl`gg;=!x1)@pOH*lQ>5o(YgHKmM8-KAftqelN?`9}-6OQ-qS3 zrPgT=Qj|}cO<|Lxk3ikN&SQs{?PknsC&r9Cb-vCdUe8MsY$+{}HmNr!?AS(6RosE_ zzLq^Y6A8;2gN#Lzk5S`R^Rvvy4>GC$D%WiqL~)X(0ZgnyT2kDP>4 zs{-@OYF?WO%T<-|zqAs1kNRo^Q1#2zbQpF&6-&QI_fEjn&l07ondmABP7_)yhoXio zt^WT<7iRy9DqabwcQUl6888+SZ9XaD=eQUThJ9$<8Es)x59#DKM*Os93y8lyowZEd zmv;Bx%^c)Q{~_EwH&FnG$hOAi+={;nUAcD)SPduuYYWp_od-1hs>jIbR)B!8ci zpH4vAHKV%cpL(o$MdYViO3I>{L_6u)BRk|@5iTV}`{3O@&Y}Ax>@W(1*L#BbJMF^%NQ{>(o7g-akb-Vk<#zjOygIF@xXuQD-KiLLQR+Pr&k z+ij0$HrleMZix2yn=gV#);mPh|L)w;t~Zb(&u9zR=8xn#+9IxuRojWDMH5Xm+M+V) zXNgeSZxI1$GR>0+rUbT*_F6==EfI2Dm-l^<-clCt0xkl{8^7a%HosJ*_7xn@%*^Q-D|d^5C6zmvx;W+|73!)PH1)gm^q*( z5x~ue80~kF{k>dGTx#N&zutzrdHbZ4K*TzyYg^Yst`FUZtq4!}N8d*9i9{ZM zU7dW%EZ$ch&J(O{x&wi4+Iw;7?`DHi& literal 0 HcmV?d00001 diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib.sln b/common/dist/zlib/contrib/dotzlib/DotZLib.sln new file mode 100644 index 000000000..ac45ca048 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib.sln @@ -0,0 +1,21 @@ +Microsoft Visual Studio Solution File, Format Version 8.00 +Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DotZLib", "DotZLib\DotZLib.csproj", "{BB1EE0B1-1808-46CB-B786-949D91117FC5}" + ProjectSection(ProjectDependencies) = postProject + EndProjectSection +EndProject +Global + GlobalSection(SolutionConfiguration) = preSolution + Debug = Debug + Release = Release + EndGlobalSection + GlobalSection(ProjectConfiguration) = postSolution + {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.ActiveCfg = Debug|.NET + {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.Build.0 = Debug|.NET + {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.ActiveCfg = Release|.NET + {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.Build.0 = Release|.NET + EndGlobalSection + GlobalSection(ExtensibilityGlobals) = postSolution + EndGlobalSection + GlobalSection(ExtensibilityAddIns) = postSolution + EndGlobalSection +EndGlobal diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib/AssemblyInfo.cs b/common/dist/zlib/contrib/dotzlib/DotZLib/AssemblyInfo.cs new file mode 100644 index 000000000..6fc0fdcc2 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib/AssemblyInfo.cs @@ -0,0 +1,58 @@ +using System.Reflection; +using System.Runtime.CompilerServices; + +// +// General Information about an assembly is controlled through the following +// set of attributes. Change these attribute values to modify the information +// associated with an assembly. +// +[assembly: AssemblyTitle("DotZLib")] +[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")] +[assembly: AssemblyConfiguration("")] +[assembly: AssemblyCompany("Henrik Ravn")] +[assembly: AssemblyProduct("")] +[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")] +[assembly: AssemblyTrademark("")] +[assembly: AssemblyCulture("")] + +// +// Version information for an assembly consists of the following four values: +// +// Major Version +// Minor Version +// Build Number +// Revision +// +// You can specify all the values or you can default the Revision and Build Numbers +// by using the '*' as shown below: + +[assembly: AssemblyVersion("1.0.*")] + +// +// In order to sign your assembly you must specify a key to use. Refer to the +// Microsoft .NET Framework documentation for more information on assembly signing. +// +// Use the attributes below to control which key is used for signing. +// +// Notes: +// (*) If no key is specified, the assembly is not signed. +// (*) KeyName refers to a key that has been installed in the Crypto Service +// Provider (CSP) on your machine. KeyFile refers to a file which contains +// a key. +// (*) If the KeyFile and the KeyName values are both specified, the +// following processing occurs: +// (1) If the KeyName can be found in the CSP, that key is used. +// (2) If the KeyName does not exist and the KeyFile does exist, the key +// in the KeyFile is installed into the CSP and used. +// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility. +// When specifying the KeyFile, the location of the KeyFile should be +// relative to the project output directory which is +// %Project Directory%\obj\. For example, if your KeyFile is +// located in the project directory, you would specify the AssemblyKeyFile +// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")] +// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework +// documentation for more information on this. +// +[assembly: AssemblyDelaySign(false)] +[assembly: AssemblyKeyFile("")] +[assembly: AssemblyKeyName("")] diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs b/common/dist/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs new file mode 100644 index 000000000..dfe7e90a8 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib/ChecksumImpl.cs @@ -0,0 +1,202 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Runtime.InteropServices; +using System.Text; + + +namespace DotZLib +{ + #region ChecksumGeneratorBase + /// + /// Implements the common functionality needed for all s + /// + /// + public abstract class ChecksumGeneratorBase : ChecksumGenerator + { + /// + /// The value of the current checksum + /// + protected uint _current; + + /// + /// Initializes a new instance of the checksum generator base - the current checksum is + /// set to zero + /// + public ChecksumGeneratorBase() + { + _current = 0; + } + + /// + /// Initializes a new instance of the checksum generator basewith a specified value + /// + /// The value to set the current checksum to + public ChecksumGeneratorBase(uint initialValue) + { + _current = initialValue; + } + + /// + /// Resets the current checksum to zero + /// + public void Reset() { _current = 0; } + + /// + /// Gets the current checksum value + /// + public uint Value { get { return _current; } } + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + /// All the other Update methods are implmeneted in terms of this one. + /// This is therefore the only method a derived class has to implement + public abstract void Update(byte[] data, int offset, int count); + + /// + /// Updates the current checksum with an array of bytes. + /// + /// The data to update the checksum with + public void Update(byte[] data) + { + Update(data, 0, data.Length); + } + + /// + /// Updates the current checksum with the data from a string + /// + /// The string to update the checksum with + /// The characters in the string are converted by the UTF-8 encoding + public void Update(string data) + { + Update(Encoding.UTF8.GetBytes(data)); + } + + /// + /// Updates the current checksum with the data from a string, using a specific encoding + /// + /// The string to update the checksum with + /// The encoding to use + public void Update(string data, Encoding encoding) + { + Update(encoding.GetBytes(data)); + } + + } + #endregion + + #region CRC32 + /// + /// Implements a CRC32 checksum generator + /// + public sealed class CRC32Checksum : ChecksumGeneratorBase + { + #region DLL imports + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern uint crc32(uint crc, int data, uint length); + + #endregion + + /// + /// Initializes a new instance of the CRC32 checksum generator + /// + public CRC32Checksum() : base() {} + + /// + /// Initializes a new instance of the CRC32 checksum generator with a specified value + /// + /// The value to set the current checksum to + public CRC32Checksum(uint initialValue) : base(initialValue) {} + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + public override void Update(byte[] data, int offset, int count) + { + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned); + try + { + _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count); + } + finally + { + hData.Free(); + } + } + + } + #endregion + + #region Adler + /// + /// Implements a checksum generator that computes the Adler checksum on data + /// + public sealed class AdlerChecksum : ChecksumGeneratorBase + { + #region DLL imports + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern uint adler32(uint adler, int data, uint length); + + #endregion + + /// + /// Initializes a new instance of the Adler checksum generator + /// + public AdlerChecksum() : base() {} + + /// + /// Initializes a new instance of the Adler checksum generator with a specified value + /// + /// The value to set the current checksum to + public AdlerChecksum(uint initialValue) : base(initialValue) {} + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + public override void Update(byte[] data, int offset, int count) + { + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned); + try + { + _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count); + } + finally + { + hData.Free(); + } + } + + } + #endregion + +} \ No newline at end of file diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib/CircularBuffer.cs b/common/dist/zlib/contrib/dotzlib/DotZLib/CircularBuffer.cs new file mode 100644 index 000000000..16997e906 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib/CircularBuffer.cs @@ -0,0 +1,83 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Diagnostics; + +namespace DotZLib +{ + + /// + /// This class implements a circular buffer + /// + internal class CircularBuffer + { + #region Private data + private int _capacity; + private int _head; + private int _tail; + private int _size; + private byte[] _buffer; + #endregion + + public CircularBuffer(int capacity) + { + Debug.Assert( capacity > 0 ); + _buffer = new byte[capacity]; + _capacity = capacity; + _head = 0; + _tail = 0; + _size = 0; + } + + public int Size { get { return _size; } } + + public int Put(byte[] source, int offset, int count) + { + Debug.Assert( count > 0 ); + int trueCount = Math.Min(count, _capacity - Size); + for (int i = 0; i < trueCount; ++i) + _buffer[(_tail+i) % _capacity] = source[offset+i]; + _tail += trueCount; + _tail %= _capacity; + _size += trueCount; + return trueCount; + } + + public bool Put(byte b) + { + if (Size == _capacity) // no room + return false; + _buffer[_tail++] = b; + _tail %= _capacity; + ++_size; + return true; + } + + public int Get(byte[] destination, int offset, int count) + { + int trueCount = Math.Min(count,Size); + for (int i = 0; i < trueCount; ++i) + destination[offset + i] = _buffer[(_head+i) % _capacity]; + _head += trueCount; + _head %= _capacity; + _size -= trueCount; + return trueCount; + } + + public int Get() + { + if (Size == 0) + return -1; + + int result = (int)_buffer[_head++ % _capacity]; + --_size; + return result; + } + + } +} diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib/CodecBase.cs b/common/dist/zlib/contrib/dotzlib/DotZLib/CodecBase.cs new file mode 100644 index 000000000..954db7db0 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib/CodecBase.cs @@ -0,0 +1,198 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + /// + /// Implements the common functionality needed for all s + /// + public abstract class CodecBase : Codec, IDisposable + { + + #region Data members + + /// + /// Instance of the internal zlib buffer structure that is + /// passed to all functions in the zlib dll + /// + internal ZStream _ztream = new ZStream(); + + /// + /// True if the object instance has been disposed, false otherwise + /// + protected bool _isDisposed = false; + + /// + /// The size of the internal buffers + /// + protected const int kBufferSize = 16384; + + private byte[] _outBuffer = new byte[kBufferSize]; + private byte[] _inBuffer = new byte[kBufferSize]; + + private GCHandle _hInput; + private GCHandle _hOutput; + + private uint _checksum = 0; + + #endregion + + /// + /// Initializes a new instance of the CodeBase class. + /// + public CodecBase() + { + try + { + _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned); + _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned); + } + catch (Exception) + { + CleanUp(false); + throw; + } + } + + + #region Codec Members + + /// + /// Occurs when more processed data are available. + /// + public event DataAvailableHandler DataAvailable; + + /// + /// Fires the event + /// + protected void OnDataAvailable() + { + if (_ztream.total_out > 0) + { + if (DataAvailable != null) + DataAvailable( _outBuffer, 0, (int)_ztream.total_out); + resetOutput(); + } + } + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// Adding data may, or may not, raise the DataAvailable event + public void Add(byte[] data) + { + Add(data,0,data.Length); + } + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + /// This must be implemented by a derived class + public abstract void Add(byte[] data, int offset, int count); + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + /// This must be implemented by a derived class + public abstract void Finish(); + + /// + /// Gets the checksum of the data that has been added so far + /// + public uint Checksum { get { return _checksum; } } + + #endregion + + #region Destructor & IDisposable stuff + + /// + /// Destroys this instance + /// + ~CodecBase() + { + CleanUp(false); + } + + /// + /// Releases any unmanaged resources and calls the method of the derived class + /// + public void Dispose() + { + CleanUp(true); + } + + /// + /// Performs any codec specific cleanup + /// + /// This must be implemented by a derived class + protected abstract void CleanUp(); + + // performs the release of the handles and calls the dereived CleanUp() + private void CleanUp(bool isDisposing) + { + if (!_isDisposed) + { + CleanUp(); + if (_hInput.IsAllocated) + _hInput.Free(); + if (_hOutput.IsAllocated) + _hOutput.Free(); + + _isDisposed = true; + } + } + + + #endregion + + #region Helper methods + + /// + /// Copies a number of bytes to the internal codec buffer - ready for proccesing + /// + /// The byte array that contains the data to copy + /// The index of the first byte to copy + /// The number of bytes to copy from data + protected void copyInput(byte[] data, int startIndex, int count) + { + Array.Copy(data, startIndex, _inBuffer,0, count); + _ztream.next_in = _hInput.AddrOfPinnedObject(); + _ztream.total_in = 0; + _ztream.avail_in = (uint)count; + + } + + /// + /// Resets the internal output buffers to a known state - ready for processing + /// + protected void resetOutput() + { + _ztream.total_out = 0; + _ztream.avail_out = kBufferSize; + _ztream.next_out = _hOutput.AddrOfPinnedObject(); + } + + /// + /// Updates the running checksum property + /// + /// The new checksum value + protected void setChecksum(uint newSum) + { + _checksum = newSum; + } + #endregion + + } +} diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib/Deflater.cs b/common/dist/zlib/contrib/dotzlib/DotZLib/Deflater.cs new file mode 100644 index 000000000..d7b8dccca --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib/Deflater.cs @@ -0,0 +1,106 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Diagnostics; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + + /// + /// Implements a data compressor, using the deflate algorithm in the ZLib dll + /// + public sealed class Deflater : CodecBase + { + #region Dll imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] + private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int deflate(ref ZStream sz, int flush); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int deflateReset(ref ZStream sz); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int deflateEnd(ref ZStream sz); + #endregion + + /// + /// Constructs an new instance of the Deflater + /// + /// The compression level to use for this Deflater + public Deflater(CompressLevel level) : base() + { + int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream)); + if (retval != 0) + throw new ZLibException(retval, "Could not initialize deflater"); + + resetOutput(); + } + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + public override void Add(byte[] data, int offset, int count) + { + if (data == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + + int total = count; + int inputIndex = offset; + int err = 0; + + while (err >= 0 && inputIndex < total) + { + copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize)); + while (err >= 0 && _ztream.avail_in > 0) + { + err = deflate(ref _ztream, (int)FlushTypes.None); + if (err == 0) + while (_ztream.avail_out == 0) + { + OnDataAvailable(); + err = deflate(ref _ztream, (int)FlushTypes.None); + } + inputIndex += (int)_ztream.total_in; + } + } + setChecksum( _ztream.adler ); + } + + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + public override void Finish() + { + int err; + do + { + err = deflate(ref _ztream, (int)FlushTypes.Finish); + OnDataAvailable(); + } + while (err == 0); + setChecksum( _ztream.adler ); + deflateReset(ref _ztream); + resetOutput(); + } + + /// + /// Closes the internal zlib deflate stream + /// + protected override void CleanUp() { deflateEnd(ref _ztream); } + + } +} diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib/DotZLib.cs b/common/dist/zlib/contrib/dotzlib/DotZLib/DotZLib.cs new file mode 100644 index 000000000..410deb088 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib/DotZLib.cs @@ -0,0 +1,288 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.IO; +using System.Runtime.InteropServices; +using System.Text; + + +namespace DotZLib +{ + + #region Internal types + + /// + /// Defines constants for the various flush types used with zlib + /// + internal enum FlushTypes + { + None, Partial, Sync, Full, Finish, Block + } + + #region ZStream structure + // internal mapping of the zlib zstream structure for marshalling + [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)] + internal struct ZStream + { + public IntPtr next_in; + public uint avail_in; + public uint total_in; + + public IntPtr next_out; + public uint avail_out; + public uint total_out; + + [MarshalAs(UnmanagedType.LPStr)] + string msg; + uint state; + + uint zalloc; + uint zfree; + uint opaque; + + int data_type; + public uint adler; + uint reserved; + } + + #endregion + + #endregion + + #region Public enums + /// + /// Defines constants for the available compression levels in zlib + /// + public enum CompressLevel : int + { + /// + /// The default compression level with a reasonable compromise between compression and speed + /// + Default = -1, + /// + /// No compression at all. The data are passed straight through. + /// + None = 0, + /// + /// The maximum compression rate available. + /// + Best = 9, + /// + /// The fastest available compression level. + /// + Fastest = 1 + } + #endregion + + #region Exception classes + /// + /// The exception that is thrown when an error occurs on the zlib dll + /// + public class ZLibException : ApplicationException + { + /// + /// Initializes a new instance of the class with a specified + /// error message and error code + /// + /// The zlib error code that caused the exception + /// A message that (hopefully) describes the error + public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg)) + { + } + + /// + /// Initializes a new instance of the class with a specified + /// error code + /// + /// The zlib error code that caused the exception + public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode)) + { + } + } + #endregion + + #region Interfaces + + /// + /// Declares methods and properties that enables a running checksum to be calculated + /// + public interface ChecksumGenerator + { + /// + /// Gets the current value of the checksum + /// + uint Value { get; } + + /// + /// Clears the current checksum to 0 + /// + void Reset(); + + /// + /// Updates the current checksum with an array of bytes + /// + /// The data to update the checksum with + void Update(byte[] data); + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + void Update(byte[] data, int offset, int count); + + /// + /// Updates the current checksum with the data from a string + /// + /// The string to update the checksum with + /// The characters in the string are converted by the UTF-8 encoding + void Update(string data); + + /// + /// Updates the current checksum with the data from a string, using a specific encoding + /// + /// The string to update the checksum with + /// The encoding to use + void Update(string data, Encoding encoding); + } + + + /// + /// Represents the method that will be called from a codec when new data + /// are available. + /// + /// The byte array containing the processed data + /// The index of the first processed byte in data + /// The number of processed bytes available + /// On return from this method, the data may be overwritten, so grab it while you can. + /// You cannot assume that startIndex will be zero. + /// + public delegate void DataAvailableHandler(byte[] data, int startIndex, int count); + + /// + /// Declares methods and events for implementing compressors/decompressors + /// + public interface Codec + { + /// + /// Occurs when more processed data are available. + /// + event DataAvailableHandler DataAvailable; + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// Adding data may, or may not, raise the DataAvailable event + void Add(byte[] data); + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + void Add(byte[] data, int offset, int count); + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + void Finish(); + + /// + /// Gets the checksum of the data that has been added so far + /// + uint Checksum { get; } + + + } + + #endregion + + #region Classes + /// + /// Encapsulates general information about the ZLib library + /// + public class Info + { + #region DLL imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern uint zlibCompileFlags(); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern string zlibVersion(); + #endregion + + #region Private stuff + private uint _flags; + + // helper function that unpacks a bitsize mask + private static int bitSize(uint bits) + { + switch (bits) + { + case 0: return 16; + case 1: return 32; + case 2: return 64; + } + return -1; + } + #endregion + + /// + /// Constructs an instance of the Info class. + /// + public Info() + { + _flags = zlibCompileFlags(); + } + + /// + /// True if the library is compiled with debug info + /// + public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } } + + /// + /// True if the library is compiled with assembly optimizations + /// + public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } } + + /// + /// Gets the size of the unsigned int that was compiled into Zlib + /// + public int SizeOfUInt { get { return bitSize(_flags & 3); } } + + /// + /// Gets the size of the unsigned long that was compiled into Zlib + /// + public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } } + + /// + /// Gets the size of the pointers that were compiled into Zlib + /// + public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } } + + /// + /// Gets the size of the z_off_t type that was compiled into Zlib + /// + public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } } + + /// + /// Gets the version of ZLib as a string, e.g. "1.2.1" + /// + public static string Version { get { return zlibVersion(); } } + } + + #endregion + +} diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib/DotZLib.csproj b/common/dist/zlib/contrib/dotzlib/DotZLib/DotZLib.csproj new file mode 100644 index 000000000..71eeb8590 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib/DotZLib.csproj @@ -0,0 +1,141 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib/GZipStream.cs b/common/dist/zlib/contrib/dotzlib/DotZLib/GZipStream.cs new file mode 100644 index 000000000..f861675b5 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib/GZipStream.cs @@ -0,0 +1,301 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.IO; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + /// + /// Implements a compressed , in GZip (.gz) format. + /// + public class GZipStream : Stream, IDisposable + { + #region Dll Imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] + private static extern IntPtr gzopen(string name, string mode); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzclose(IntPtr gzFile); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzwrite(IntPtr gzFile, int data, int length); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzread(IntPtr gzFile, int data, int length); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzgetc(IntPtr gzFile); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzputc(IntPtr gzFile, int c); + + #endregion + + #region Private data + private IntPtr _gzFile; + private bool _isDisposed = false; + private bool _isWriting; + #endregion + + #region Constructors + /// + /// Creates a new file as a writeable GZipStream + /// + /// The name of the compressed file to create + /// The compression level to use when adding data + /// If an error occurred in the internal zlib function + public GZipStream(string fileName, CompressLevel level) + { + _isWriting = true; + _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level)); + if (_gzFile == IntPtr.Zero) + throw new ZLibException(-1, "Could not open " + fileName); + } + + /// + /// Opens an existing file as a readable GZipStream + /// + /// The name of the file to open + /// If an error occurred in the internal zlib function + public GZipStream(string fileName) + { + _isWriting = false; + _gzFile = gzopen(fileName, "rb"); + if (_gzFile == IntPtr.Zero) + throw new ZLibException(-1, "Could not open " + fileName); + + } + #endregion + + #region Access properties + /// + /// Returns true of this stream can be read from, false otherwise + /// + public override bool CanRead + { + get + { + return !_isWriting; + } + } + + + /// + /// Returns false. + /// + public override bool CanSeek + { + get + { + return false; + } + } + + /// + /// Returns true if this tsream is writeable, false otherwise + /// + public override bool CanWrite + { + get + { + return _isWriting; + } + } + #endregion + + #region Destructor & IDispose stuff + + /// + /// Destroys this instance + /// + ~GZipStream() + { + cleanUp(false); + } + + /// + /// Closes the external file handle + /// + public void Dispose() + { + cleanUp(true); + } + + // Does the actual closing of the file handle. + private void cleanUp(bool isDisposing) + { + if (!_isDisposed) + { + gzclose(_gzFile); + _isDisposed = true; + } + } + #endregion + + #region Basic reading and writing + /// + /// Attempts to read a number of bytes from the stream. + /// + /// The destination data buffer + /// The index of the first destination byte in buffer + /// The number of bytes requested + /// The number of bytes read + /// If buffer is null + /// If count or offset are negative + /// If offset + count is > buffer.Length + /// If this stream is not readable. + /// If this stream has been disposed. + public override int Read(byte[] buffer, int offset, int count) + { + if (!CanRead) throw new NotSupportedException(); + if (buffer == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > buffer.Length) throw new ArgumentException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + + GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned); + int result; + try + { + result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count); + if (result < 0) + throw new IOException(); + } + finally + { + h.Free(); + } + return result; + } + + /// + /// Attempts to read a single byte from the stream. + /// + /// The byte that was read, or -1 in case of error or End-Of-File + public override int ReadByte() + { + if (!CanRead) throw new NotSupportedException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + return gzgetc(_gzFile); + } + + /// + /// Writes a number of bytes to the stream + /// + /// + /// + /// + /// If buffer is null + /// If count or offset are negative + /// If offset + count is > buffer.Length + /// If this stream is not writeable. + /// If this stream has been disposed. + public override void Write(byte[] buffer, int offset, int count) + { + if (!CanWrite) throw new NotSupportedException(); + if (buffer == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > buffer.Length) throw new ArgumentException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + + GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned); + try + { + int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count); + if (result < 0) + throw new IOException(); + } + finally + { + h.Free(); + } + } + + /// + /// Writes a single byte to the stream + /// + /// The byte to add to the stream. + /// If this stream is not writeable. + /// If this stream has been disposed. + public override void WriteByte(byte value) + { + if (!CanWrite) throw new NotSupportedException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + + int result = gzputc(_gzFile, (int)value); + if (result < 0) + throw new IOException(); + } + #endregion + + #region Position & length stuff + /// + /// Not supported. + /// + /// + /// Always thrown + public override void SetLength(long value) + { + throw new NotSupportedException(); + } + + /// + /// Not suppported. + /// + /// + /// + /// + /// Always thrown + public override long Seek(long offset, SeekOrigin origin) + { + throw new NotSupportedException(); + } + + /// + /// Flushes the GZipStream. + /// + /// In this implementation, this method does nothing. This is because excessive + /// flushing may degrade the achievable compression rates. + public override void Flush() + { + // left empty on purpose + } + + /// + /// Gets/sets the current position in the GZipStream. Not suppported. + /// + /// In this implementation this property is not supported + /// Always thrown + public override long Position + { + get + { + throw new NotSupportedException(); + } + set + { + throw new NotSupportedException(); + } + } + + /// + /// Gets the size of the stream. Not suppported. + /// + /// In this implementation this property is not supported + /// Always thrown + public override long Length + { + get + { + throw new NotSupportedException(); + } + } + #endregion + } +} diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib/Inflater.cs b/common/dist/zlib/contrib/dotzlib/DotZLib/Inflater.cs new file mode 100644 index 000000000..4e60cda07 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib/Inflater.cs @@ -0,0 +1,105 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Diagnostics; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + + /// + /// Implements a data decompressor, using the inflate algorithm in the ZLib dll + /// + public class Inflater : CodecBase + { + #region Dll imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] + private static extern int inflateInit_(ref ZStream sz, string vs, int size); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int inflate(ref ZStream sz, int flush); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int inflateReset(ref ZStream sz); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int inflateEnd(ref ZStream sz); + #endregion + + /// + /// Constructs an new instance of the Inflater + /// + public Inflater() : base() + { + int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream)); + if (retval != 0) + throw new ZLibException(retval, "Could not initialize inflater"); + + resetOutput(); + } + + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + public override void Add(byte[] data, int offset, int count) + { + if (data == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + + int total = count; + int inputIndex = offset; + int err = 0; + + while (err >= 0 && inputIndex < total) + { + copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize)); + err = inflate(ref _ztream, (int)FlushTypes.None); + if (err == 0) + while (_ztream.avail_out == 0) + { + OnDataAvailable(); + err = inflate(ref _ztream, (int)FlushTypes.None); + } + + inputIndex += (int)_ztream.total_in; + } + setChecksum( _ztream.adler ); + } + + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + public override void Finish() + { + int err; + do + { + err = inflate(ref _ztream, (int)FlushTypes.Finish); + OnDataAvailable(); + } + while (err == 0); + setChecksum( _ztream.adler ); + inflateReset(ref _ztream); + resetOutput(); + } + + /// + /// Closes the internal zlib inflate stream + /// + protected override void CleanUp() { inflateEnd(ref _ztream); } + + + } +} diff --git a/common/dist/zlib/contrib/dotzlib/DotZLib/UnitTests.cs b/common/dist/zlib/contrib/dotzlib/DotZLib/UnitTests.cs new file mode 100644 index 000000000..8dc00db92 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/DotZLib/UnitTests.cs @@ -0,0 +1,274 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Collections; +using System.IO; + +// uncomment the define below to include unit tests +//#define nunit +#if nunit +using NUnit.Framework; + +// Unit tests for the DotZLib class library +// ---------------------------------------- +// +// Use this with NUnit 2 from http://www.nunit.org +// + +namespace DotZLibTests +{ + using DotZLib; + + // helper methods + internal class Utils + { + public static bool byteArrEqual( byte[] lhs, byte[] rhs ) + { + if (lhs.Length != rhs.Length) + return false; + for (int i = lhs.Length-1; i >= 0; --i) + if (lhs[i] != rhs[i]) + return false; + return true; + } + + } + + + [TestFixture] + public class CircBufferTests + { + #region Circular buffer tests + [Test] + public void SinglePutGet() + { + CircularBuffer buf = new CircularBuffer(10); + Assert.AreEqual( 0, buf.Size ); + Assert.AreEqual( -1, buf.Get() ); + + Assert.IsTrue(buf.Put( 1 )); + Assert.AreEqual( 1, buf.Size ); + Assert.AreEqual( 1, buf.Get() ); + Assert.AreEqual( 0, buf.Size ); + Assert.AreEqual( -1, buf.Get() ); + } + + [Test] + public void BlockPutGet() + { + CircularBuffer buf = new CircularBuffer(10); + byte[] arr = {1,2,3,4,5,6,7,8,9,10}; + Assert.AreEqual( 10, buf.Put(arr,0,10) ); + Assert.AreEqual( 10, buf.Size ); + Assert.IsFalse( buf.Put(11) ); + Assert.AreEqual( 1, buf.Get() ); + Assert.IsTrue( buf.Put(11) ); + + byte[] arr2 = (byte[])arr.Clone(); + Assert.AreEqual( 9, buf.Get(arr2,1,9) ); + Assert.IsTrue( Utils.byteArrEqual(arr,arr2) ); + } + + #endregion + } + + [TestFixture] + public class ChecksumTests + { + #region CRC32 Tests + [Test] + public void CRC32_Null() + { + CRC32Checksum crc32 = new CRC32Checksum(); + Assert.AreEqual( 0, crc32.Value ); + + crc32 = new CRC32Checksum(1); + Assert.AreEqual( 1, crc32.Value ); + + crc32 = new CRC32Checksum(556); + Assert.AreEqual( 556, crc32.Value ); + } + + [Test] + public void CRC32_Data() + { + CRC32Checksum crc32 = new CRC32Checksum(); + byte[] data = { 1,2,3,4,5,6,7 }; + crc32.Update(data); + Assert.AreEqual( 0x70e46888, crc32.Value ); + + crc32 = new CRC32Checksum(); + crc32.Update("penguin"); + Assert.AreEqual( 0x0e5c1a120, crc32.Value ); + + crc32 = new CRC32Checksum(1); + crc32.Update("penguin"); + Assert.AreEqual(0x43b6aa94, crc32.Value); + + } + #endregion + + #region Adler tests + + [Test] + public void Adler_Null() + { + AdlerChecksum adler = new AdlerChecksum(); + Assert.AreEqual(0, adler.Value); + + adler = new AdlerChecksum(1); + Assert.AreEqual( 1, adler.Value ); + + adler = new AdlerChecksum(556); + Assert.AreEqual( 556, adler.Value ); + } + + [Test] + public void Adler_Data() + { + AdlerChecksum adler = new AdlerChecksum(1); + byte[] data = { 1,2,3,4,5,6,7 }; + adler.Update(data); + Assert.AreEqual( 0x5b001d, adler.Value ); + + adler = new AdlerChecksum(); + adler.Update("penguin"); + Assert.AreEqual(0x0bcf02f6, adler.Value ); + + adler = new AdlerChecksum(1); + adler.Update("penguin"); + Assert.AreEqual(0x0bd602f7, adler.Value); + + } + #endregion + } + + [TestFixture] + public class InfoTests + { + #region Info tests + [Test] + public void Info_Version() + { + Info info = new Info(); + Assert.AreEqual("1.2.3", Info.Version); + Assert.AreEqual(32, info.SizeOfUInt); + Assert.AreEqual(32, info.SizeOfULong); + Assert.AreEqual(32, info.SizeOfPointer); + Assert.AreEqual(32, info.SizeOfOffset); + } + #endregion + } + + [TestFixture] + public class DeflateInflateTests + { + #region Deflate tests + [Test] + public void Deflate_Init() + { + using (Deflater def = new Deflater(CompressLevel.Default)) + { + } + } + + private ArrayList compressedData = new ArrayList(); + private uint adler1; + + private ArrayList uncompressedData = new ArrayList(); + private uint adler2; + + public void CDataAvail(byte[] data, int startIndex, int count) + { + for (int i = 0; i < count; ++i) + compressedData.Add(data[i+startIndex]); + } + + [Test] + public void Deflate_Compress() + { + compressedData.Clear(); + + byte[] testData = new byte[35000]; + for (int i = 0; i < testData.Length; ++i) + testData[i] = 5; + + using (Deflater def = new Deflater((CompressLevel)5)) + { + def.DataAvailable += new DataAvailableHandler(CDataAvail); + def.Add(testData); + def.Finish(); + adler1 = def.Checksum; + } + } + #endregion + + #region Inflate tests + [Test] + public void Inflate_Init() + { + using (Inflater inf = new Inflater()) + { + } + } + + private void DDataAvail(byte[] data, int startIndex, int count) + { + for (int i = 0; i < count; ++i) + uncompressedData.Add(data[i+startIndex]); + } + + [Test] + public void Inflate_Expand() + { + uncompressedData.Clear(); + + using (Inflater inf = new Inflater()) + { + inf.DataAvailable += new DataAvailableHandler(DDataAvail); + inf.Add((byte[])compressedData.ToArray(typeof(byte))); + inf.Finish(); + adler2 = inf.Checksum; + } + Assert.AreEqual( adler1, adler2 ); + } + #endregion + } + + [TestFixture] + public class GZipStreamTests + { + #region GZipStream test + [Test] + public void GZipStream_WriteRead() + { + using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best)) + { + BinaryWriter writer = new BinaryWriter(gzOut); + writer.Write("hi there"); + writer.Write(Math.PI); + writer.Write(42); + } + + using (GZipStream gzIn = new GZipStream("gzstream.gz")) + { + BinaryReader reader = new BinaryReader(gzIn); + string s = reader.ReadString(); + Assert.AreEqual("hi there",s); + double d = reader.ReadDouble(); + Assert.AreEqual(Math.PI, d); + int i = reader.ReadInt32(); + Assert.AreEqual(42,i); + } + + } + #endregion + } +} + +#endif \ No newline at end of file diff --git a/common/dist/zlib/contrib/dotzlib/LICENSE_1_0.txt b/common/dist/zlib/contrib/dotzlib/LICENSE_1_0.txt new file mode 100644 index 000000000..30aac2cf4 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/LICENSE_1_0.txt @@ -0,0 +1,23 @@ +Boost Software License - Version 1.0 - August 17th, 2003 + +Permission is hereby granted, free of charge, to any person or organization +obtaining a copy of the software and accompanying documentation covered by +this license (the "Software") to use, reproduce, display, distribute, +execute, and transmit the Software, and to prepare derivative works of the +Software, and to permit third-parties to whom the Software is furnished to +do so, all subject to the following: + +The copyright notices in the Software and this entire statement, including +the above license grant, this restriction and the following disclaimer, +must be included in all copies of the Software, in whole or in part, and +all derivative works of the Software, unless such copies or derivative +works are solely in the form of machine-executable object code generated by +a source language processor. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT +SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE +FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. \ No newline at end of file diff --git a/common/dist/zlib/contrib/dotzlib/readme.txt b/common/dist/zlib/contrib/dotzlib/readme.txt new file mode 100644 index 000000000..210f4b001 --- /dev/null +++ b/common/dist/zlib/contrib/dotzlib/readme.txt @@ -0,0 +1,58 @@ +This directory contains a .Net wrapper class library for the ZLib1.dll + +The wrapper includes support for inflating/deflating memory buffers, +.Net streaming wrappers for the gz streams part of zlib, and wrappers +for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples. + +Directory structure: +-------------------- + +LICENSE_1_0.txt - License file. +readme.txt - This file. +DotZLib.chm - Class library documentation +DotZLib.build - NAnt build file +DotZLib.sln - Microsoft Visual Studio 2003 solution file + +DotZLib\*.cs - Source files for the class library + +Unit tests: +----------- +The file DotZLib/UnitTests.cs contains unit tests for use with NUnit 2.1 or higher. +To include unit tests in the build, define nunit before building. + + +Build instructions: +------------------- + +1. Using Visual Studio.Net 2003: + Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll) + will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on + you are building the release or debug version of the library. Check + DotZLib/UnitTests.cs for instructions on how to include unit tests in the + build. + +2. Using NAnt: + Open a command prompt with access to the build environment and run nant + in the same directory as the DotZLib.build file. + You can define 2 properties on the nant command-line to control the build: + debug={true|false} to toggle between release/debug builds (default=true). + nunit={true|false} to include or esclude unit tests (default=true). + Also the target clean will remove binaries. + Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release + or ./DotZLib/bin/debug, depending on whether you are building the release + or debug version of the library. + + Examples: + nant -D:debug=false -D:nunit=false + will build a release mode version of the library without unit tests. + nant + will build a debug version of the library with unit tests + nant clean + will remove all previously built files. + + +--------------------------------- +Copyright (c) Henrik Ravn 2004 + +Use, modification and distribution are subject to the Boost Software License, Version 1.0. +(See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) diff --git a/common/dist/zlib/contrib/infback9/README b/common/dist/zlib/contrib/infback9/README new file mode 100644 index 000000000..e75ed1329 --- /dev/null +++ b/common/dist/zlib/contrib/infback9/README @@ -0,0 +1 @@ +See infback9.h for what this is and how to use it. diff --git a/common/dist/zlib/contrib/infback9/infback9.c b/common/dist/zlib/contrib/infback9/infback9.c new file mode 100644 index 000000000..371d163cb --- /dev/null +++ b/common/dist/zlib/contrib/infback9/infback9.c @@ -0,0 +1,610 @@ +/* $NetBSD: infback9.c,v 1.1.1.1 2006/01/14 20:10:50 christos Exp $ */ + +/* infback9.c -- inflate deflate64 data using a call-back interface + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "infback9.h" +#include "inftree9.h" +#include "inflate9.h" + +#define WSIZE 65536UL + +/* + strm provides memory allocation functions in zalloc and zfree, or + Z_NULL to use the library memory allocation functions. + + window is a user-supplied window and output buffer that is 64K bytes. + */ +int ZEXPORT inflateBack9Init_(strm, window, version, stream_size) +z_stream FAR *strm; +unsigned char FAR *window; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL || window == Z_NULL) + return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; + } + if (strm->zfree == (free_func)0) strm->zfree = zcfree; + state = (struct inflate_state FAR *)ZALLOC(strm, 1, + sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (voidpf)state; + state->window = window; + return Z_OK; +} + +/* + Build and output length and distance decoding tables for fixed code + decoding. + */ +#ifdef MAKEFIXED +#include + +void makefixed9(void) +{ + unsigned sym, bits, low, size; + code *next, *lenfix, *distfix; + struct inflate_state state; + code fixed[544]; + + /* literal/length table */ + sym = 0; + while (sym < 144) state.lens[sym++] = 8; + while (sym < 256) state.lens[sym++] = 9; + while (sym < 280) state.lens[sym++] = 7; + while (sym < 288) state.lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table9(LENS, state.lens, 288, &(next), &(bits), state.work); + + /* distance table */ + sym = 0; + while (sym < 32) state.lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table9(DISTS, state.lens, 32, &(next), &(bits), state.work); + + /* write tables */ + puts(" /* inffix9.h -- table for decoding deflate64 fixed codes"); + puts(" * Generated automatically by makefixed9()."); + puts(" */"); + puts(""); + puts(" /* WARNING: this file should *not* be used by applications."); + puts(" It is part of the implementation of this library and is"); + puts(" subject to change. Applications should only use zlib.h."); + puts(" */"); + puts(""); + size = 1U << 9; + printf(" static const code lenfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 6) == 0) printf("\n "); + printf("{%u,%u,%d}", lenfix[low].op, lenfix[low].bits, + lenfix[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); + size = 1U << 5; + printf("\n static const code distfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 5) == 0) printf("\n "); + printf("{%u,%u,%d}", distfix[low].op, distfix[low].bits, + distfix[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); +} +#endif /* MAKEFIXED */ + +/* Macros for inflateBack(): */ + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Assure that some input is available. If input is requested, but denied, + then return a Z_BUF_ERROR from inflateBack(). */ +#define PULL() \ + do { \ + if (have == 0) { \ + have = in(in_desc, &next); \ + if (have == 0) { \ + next = Z_NULL; \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflateBack() + with an error if there is no input available. */ +#define PULLBYTE() \ + do { \ + PULL(); \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflateBack() with + an error. */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n <= 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Assure that some output space is available, by writing out the window + if it's full. If the write fails, return from inflateBack() with a + Z_BUF_ERROR. */ +#define ROOM() \ + do { \ + if (left == 0) { \ + put = window; \ + left = WSIZE; \ + wrap = 1; \ + if (out(out_desc, put, (unsigned)left)) { \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* + strm provides the memory allocation functions and window buffer on input, + and provides information on the unused input on return. For Z_DATA_ERROR + returns, strm will also provide an error message. + + in() and out() are the call-back input and output functions. When + inflateBack() needs more input, it calls in(). When inflateBack() has + filled the window with output, or when it completes with data in the + window, it calls out() to write out the data. The application must not + change the provided input until in() is called again or inflateBack() + returns. The application must not change the window/output buffer until + inflateBack() returns. + + in() and out() are called with a descriptor parameter provided in the + inflateBack() call. This parameter can be a structure that provides the + information required to do the read or write, as well as accumulated + information on the input and output such as totals and check values. + + in() should return zero on failure. out() should return non-zero on + failure. If either in() or out() fails, than inflateBack() returns a + Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it + was in() or out() that caused in the error. Otherwise, inflateBack() + returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format + error, or Z_MEM_ERROR if it could not allocate memory for the state. + inflateBack() can also return Z_STREAM_ERROR if the input parameters + are not correct, i.e. strm is Z_NULL or the state was not initialized. + */ +int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc) +z_stream FAR *strm; +in_func in; +void FAR *in_desc; +out_func out; +void FAR *out_desc; +{ + struct inflate_state FAR *state; + unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have; /* available input */ + unsigned long left; /* available output */ + inflate_mode mode; /* current inflate mode */ + int lastblock; /* true if processing last block */ + int wrap; /* true if the window has wrapped */ + unsigned long write; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned extra; /* extra bits needed */ + unsigned long length; /* literal or length of data to copy */ + unsigned long offset; /* distance back to copy string from */ + unsigned long copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code const FAR *lencode; /* starting table for length/literal codes */ + code const FAR *distcode; /* starting table for distance codes */ + unsigned lenbits; /* index bits for lencode */ + unsigned distbits; /* index bits for distcode */ + code this; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; +#include "inffix9.h" + + /* Check that the strm exists and that the state was initialized */ + if (strm == Z_NULL || strm->state == Z_NULL) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* Reset the state */ + strm->msg = Z_NULL; + mode = TYPE; + lastblock = 0; + write = 0; + wrap = 0; + window = state->window; + next = strm->next_in; + have = next != Z_NULL ? strm->avail_in : 0; + hold = 0; + bits = 0; + put = window; + left = WSIZE; + lencode = Z_NULL; + distcode = Z_NULL; + + /* Inflate until end of block marked as last */ + for (;;) + switch (mode) { + case TYPE: + /* determine and dispatch block type */ + if (lastblock) { + BYTEBITS(); + mode = DONE; + break; + } + NEEDBITS(3); + lastblock = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + lastblock ? " (last)" : "")); + mode = STORED; + break; + case 1: /* fixed block */ + lencode = lenfix; + lenbits = 9; + distcode = distfix; + distbits = 5; + Tracev((stderr, "inflate: fixed codes block%s\n", + lastblock ? " (last)" : "")); + mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + lastblock ? " (last)" : "")); + mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + mode = BAD; + } + DROPBITS(2); + break; + + case STORED: + /* get and verify stored block length */ + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + mode = BAD; + break; + } + length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %lu\n", + length)); + INITBITS(); + + /* copy stored block from input to output */ + while (length != 0) { + copy = length; + PULL(); + ROOM(); + if (copy > have) copy = have; + if (copy > left) copy = left; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + length -= copy; + } + Tracev((stderr, "inflate: stored end\n")); + mode = TYPE; + break; + + case TABLE: + /* get dynamic table entries descriptor */ + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); + if (state->nlen > 286) { + strm->msg = (char *)"too many length symbols"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: table sizes ok\n")); + + /* get code length code lengths (not a typo) */ + state->have = 0; + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + lencode = (code const FAR *)(state->next); + lenbits = 7; + ret = inflate_table9(CODES, state->lens, 19, &(state->next), + &(lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + + /* get length and distance code code lengths */ + state->have = 0; + while (state->have < state->nlen + state->ndist) { + for (;;) { + this = lencode[BITS(lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.val < 16) { + NEEDBITS(this.bits); + DROPBITS(this.bits); + state->lens[state->have++] = this.val; + } + else { + if (this.val == 16) { + NEEDBITS(this.bits + 2); + DROPBITS(this.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + mode = BAD; + break; + } + len = (unsigned)(state->lens[state->have - 1]); + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (this.val == 17) { + NEEDBITS(this.bits + 3); + DROPBITS(this.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(this.bits + 7); + DROPBITS(this.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (mode == BAD) break; + + /* build code tables */ + state->next = state->codes; + lencode = (code const FAR *)(state->next); + lenbits = 9; + ret = inflate_table9(LENS, state->lens, state->nlen, + &(state->next), &(lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + mode = BAD; + break; + } + distcode = (code const FAR *)(state->next); + distbits = 6; + ret = inflate_table9(DISTS, state->lens + state->nlen, + state->ndist, &(state->next), &(distbits), + state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + mode = LEN; + + case LEN: + /* get a literal, length, or end-of-block code */ + for (;;) { + this = lencode[BITS(lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.op && (this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + length = (unsigned)this.val; + + /* process literal */ + if (this.op == 0) { + Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", this.val)); + ROOM(); + *put++ = (unsigned char)(length); + left--; + mode = LEN; + break; + } + + /* process end of block */ + if (this.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + mode = TYPE; + break; + } + + /* invalid code */ + if (this.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + mode = BAD; + break; + } + + /* length code -- get extra bits, if any */ + extra = (unsigned)(this.op) & 31; + if (extra != 0) { + NEEDBITS(extra); + length += BITS(extra); + DROPBITS(extra); + } + Tracevv((stderr, "inflate: length %lu\n", length)); + + /* get distance code */ + for (;;) { + this = distcode[BITS(distbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if ((this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + if (this.op & 64) { + strm->msg = (char *)"invalid distance code"; + mode = BAD; + break; + } + offset = (unsigned)this.val; + + /* get distance extra bits, if any */ + extra = (unsigned)(this.op) & 15; + if (extra != 0) { + NEEDBITS(extra); + offset += BITS(extra); + DROPBITS(extra); + } + if (offset > WSIZE - (wrap ? 0: left)) { + strm->msg = (char *)"invalid distance too far back"; + mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %lu\n", offset)); + + /* copy match from window to output */ + do { + ROOM(); + copy = WSIZE - offset; + if (copy < left) { + from = put + copy; + copy = left - copy; + } + else { + from = put - offset; + copy = left; + } + if (copy > length) copy = length; + length -= copy; + left -= copy; + do { + *put++ = *from++; + } while (--copy); + } while (length != 0); + break; + + case DONE: + /* inflate stream terminated properly -- write leftover output */ + ret = Z_STREAM_END; + if (left < WSIZE) { + if (out(out_desc, window, (unsigned)(WSIZE - left))) + ret = Z_BUF_ERROR; + } + goto inf_leave; + + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + + default: /* can't happen, but makes compilers happy */ + ret = Z_STREAM_ERROR; + goto inf_leave; + } + + /* Return unused input */ + inf_leave: + strm->next_in = next; + strm->avail_in = have; + return ret; +} + +int ZEXPORT inflateBack9End(strm) +z_stream FAR *strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} diff --git a/common/dist/zlib/contrib/infback9/infback9.h b/common/dist/zlib/contrib/infback9/infback9.h new file mode 100644 index 000000000..29f735ef0 --- /dev/null +++ b/common/dist/zlib/contrib/infback9/infback9.h @@ -0,0 +1,39 @@ +/* $NetBSD: infback9.h,v 1.1.1.1 2006/01/14 20:10:50 christos Exp $ */ + +/* infback9.h -- header for using inflateBack9 functions + * Copyright (C) 2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * This header file and associated patches provide a decoder for PKWare's + * undocumented deflate64 compression method (method 9). Use with infback9.c, + * inftree9.h, inftree9.c, and inffix9.h. These patches are not supported. + * This should be compiled with zlib, since it uses zutil.h and zutil.o. + * This code has not yet been tested on 16-bit architectures. See the + * comments in zlib.h for inflateBack() usage. These functions are used + * identically, except that there is no windowBits parameter, and a 64K + * window must be provided. Also if int's are 16 bits, then a zero for + * the third parameter of the "out" function actually means 65536UL. + * zlib.h must be included before this header file. + */ + +#ifdef __cplusplus +extern "C" { +#endif + +ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +ZEXTERN int ZEXPORT inflateBack9End OF((z_stream FAR *strm)); +ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm, + unsigned char FAR *window, + const char *version, + int stream_size)); +#define inflateBack9Init(strm, window) \ + inflateBack9Init_((strm), (window), \ + ZLIB_VERSION, sizeof(z_stream)) + +#ifdef __cplusplus +} +#endif diff --git a/common/dist/zlib/contrib/infback9/inffix9.h b/common/dist/zlib/contrib/infback9/inffix9.h new file mode 100644 index 000000000..999f074ef --- /dev/null +++ b/common/dist/zlib/contrib/infback9/inffix9.h @@ -0,0 +1,109 @@ +/* $NetBSD: inffix9.h,v 1.1.1.1 2006/01/14 20:10:51 christos Exp $ */ + + /* inffix9.h -- table for decoding deflate64 fixed codes + * Generated automatically by makefixed9(). + */ + + /* WARNING: this file should *not* be used by applications. + It is part of the implementation of this library and is + subject to change. Applications should only use zlib.h. + */ + + static const code lenfix[512] = { + {96,7,0},{0,8,80},{0,8,16},{132,8,115},{130,7,31},{0,8,112}, + {0,8,48},{0,9,192},{128,7,10},{0,8,96},{0,8,32},{0,9,160}, + {0,8,0},{0,8,128},{0,8,64},{0,9,224},{128,7,6},{0,8,88}, + {0,8,24},{0,9,144},{131,7,59},{0,8,120},{0,8,56},{0,9,208}, + {129,7,17},{0,8,104},{0,8,40},{0,9,176},{0,8,8},{0,8,136}, + {0,8,72},{0,9,240},{128,7,4},{0,8,84},{0,8,20},{133,8,227}, + {131,7,43},{0,8,116},{0,8,52},{0,9,200},{129,7,13},{0,8,100}, + {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232}, + {128,7,8},{0,8,92},{0,8,28},{0,9,152},{132,7,83},{0,8,124}, + {0,8,60},{0,9,216},{130,7,23},{0,8,108},{0,8,44},{0,9,184}, + {0,8,12},{0,8,140},{0,8,76},{0,9,248},{128,7,3},{0,8,82}, + {0,8,18},{133,8,163},{131,7,35},{0,8,114},{0,8,50},{0,9,196}, + {129,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},{0,8,130}, + {0,8,66},{0,9,228},{128,7,7},{0,8,90},{0,8,26},{0,9,148}, + {132,7,67},{0,8,122},{0,8,58},{0,9,212},{130,7,19},{0,8,106}, + {0,8,42},{0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244}, + {128,7,5},{0,8,86},{0,8,22},{65,8,0},{131,7,51},{0,8,118}, + {0,8,54},{0,9,204},{129,7,15},{0,8,102},{0,8,38},{0,9,172}, + {0,8,6},{0,8,134},{0,8,70},{0,9,236},{128,7,9},{0,8,94}, + {0,8,30},{0,9,156},{132,7,99},{0,8,126},{0,8,62},{0,9,220}, + {130,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, + {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{133,8,131}, + {130,7,31},{0,8,113},{0,8,49},{0,9,194},{128,7,10},{0,8,97}, + {0,8,33},{0,9,162},{0,8,1},{0,8,129},{0,8,65},{0,9,226}, + {128,7,6},{0,8,89},{0,8,25},{0,9,146},{131,7,59},{0,8,121}, + {0,8,57},{0,9,210},{129,7,17},{0,8,105},{0,8,41},{0,9,178}, + {0,8,9},{0,8,137},{0,8,73},{0,9,242},{128,7,4},{0,8,85}, + {0,8,21},{144,8,3},{131,7,43},{0,8,117},{0,8,53},{0,9,202}, + {129,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133}, + {0,8,69},{0,9,234},{128,7,8},{0,8,93},{0,8,29},{0,9,154}, + {132,7,83},{0,8,125},{0,8,61},{0,9,218},{130,7,23},{0,8,109}, + {0,8,45},{0,9,186},{0,8,13},{0,8,141},{0,8,77},{0,9,250}, + {128,7,3},{0,8,83},{0,8,19},{133,8,195},{131,7,35},{0,8,115}, + {0,8,51},{0,9,198},{129,7,11},{0,8,99},{0,8,35},{0,9,166}, + {0,8,3},{0,8,131},{0,8,67},{0,9,230},{128,7,7},{0,8,91}, + {0,8,27},{0,9,150},{132,7,67},{0,8,123},{0,8,59},{0,9,214}, + {130,7,19},{0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139}, + {0,8,75},{0,9,246},{128,7,5},{0,8,87},{0,8,23},{77,8,0}, + {131,7,51},{0,8,119},{0,8,55},{0,9,206},{129,7,15},{0,8,103}, + {0,8,39},{0,9,174},{0,8,7},{0,8,135},{0,8,71},{0,9,238}, + {128,7,9},{0,8,95},{0,8,31},{0,9,158},{132,7,99},{0,8,127}, + {0,8,63},{0,9,222},{130,7,27},{0,8,111},{0,8,47},{0,9,190}, + {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80}, + {0,8,16},{132,8,115},{130,7,31},{0,8,112},{0,8,48},{0,9,193}, + {128,7,10},{0,8,96},{0,8,32},{0,9,161},{0,8,0},{0,8,128}, + {0,8,64},{0,9,225},{128,7,6},{0,8,88},{0,8,24},{0,9,145}, + {131,7,59},{0,8,120},{0,8,56},{0,9,209},{129,7,17},{0,8,104}, + {0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},{0,9,241}, + {128,7,4},{0,8,84},{0,8,20},{133,8,227},{131,7,43},{0,8,116}, + {0,8,52},{0,9,201},{129,7,13},{0,8,100},{0,8,36},{0,9,169}, + {0,8,4},{0,8,132},{0,8,68},{0,9,233},{128,7,8},{0,8,92}, + {0,8,28},{0,9,153},{132,7,83},{0,8,124},{0,8,60},{0,9,217}, + {130,7,23},{0,8,108},{0,8,44},{0,9,185},{0,8,12},{0,8,140}, + {0,8,76},{0,9,249},{128,7,3},{0,8,82},{0,8,18},{133,8,163}, + {131,7,35},{0,8,114},{0,8,50},{0,9,197},{129,7,11},{0,8,98}, + {0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, + {128,7,7},{0,8,90},{0,8,26},{0,9,149},{132,7,67},{0,8,122}, + {0,8,58},{0,9,213},{130,7,19},{0,8,106},{0,8,42},{0,9,181}, + {0,8,10},{0,8,138},{0,8,74},{0,9,245},{128,7,5},{0,8,86}, + {0,8,22},{65,8,0},{131,7,51},{0,8,118},{0,8,54},{0,9,205}, + {129,7,15},{0,8,102},{0,8,38},{0,9,173},{0,8,6},{0,8,134}, + {0,8,70},{0,9,237},{128,7,9},{0,8,94},{0,8,30},{0,9,157}, + {132,7,99},{0,8,126},{0,8,62},{0,9,221},{130,7,27},{0,8,110}, + {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253}, + {96,7,0},{0,8,81},{0,8,17},{133,8,131},{130,7,31},{0,8,113}, + {0,8,49},{0,9,195},{128,7,10},{0,8,97},{0,8,33},{0,9,163}, + {0,8,1},{0,8,129},{0,8,65},{0,9,227},{128,7,6},{0,8,89}, + {0,8,25},{0,9,147},{131,7,59},{0,8,121},{0,8,57},{0,9,211}, + {129,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},{0,8,137}, + {0,8,73},{0,9,243},{128,7,4},{0,8,85},{0,8,21},{144,8,3}, + {131,7,43},{0,8,117},{0,8,53},{0,9,203},{129,7,13},{0,8,101}, + {0,8,37},{0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235}, + {128,7,8},{0,8,93},{0,8,29},{0,9,155},{132,7,83},{0,8,125}, + {0,8,61},{0,9,219},{130,7,23},{0,8,109},{0,8,45},{0,9,187}, + {0,8,13},{0,8,141},{0,8,77},{0,9,251},{128,7,3},{0,8,83}, + {0,8,19},{133,8,195},{131,7,35},{0,8,115},{0,8,51},{0,9,199}, + {129,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, + {0,8,67},{0,9,231},{128,7,7},{0,8,91},{0,8,27},{0,9,151}, + {132,7,67},{0,8,123},{0,8,59},{0,9,215},{130,7,19},{0,8,107}, + {0,8,43},{0,9,183},{0,8,11},{0,8,139},{0,8,75},{0,9,247}, + {128,7,5},{0,8,87},{0,8,23},{77,8,0},{131,7,51},{0,8,119}, + {0,8,55},{0,9,207},{129,7,15},{0,8,103},{0,8,39},{0,9,175}, + {0,8,7},{0,8,135},{0,8,71},{0,9,239},{128,7,9},{0,8,95}, + {0,8,31},{0,9,159},{132,7,99},{0,8,127},{0,8,63},{0,9,223}, + {130,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143}, + {0,8,79},{0,9,255} + }; + + static const code distfix[32] = { + {128,5,1},{135,5,257},{131,5,17},{139,5,4097},{129,5,5}, + {137,5,1025},{133,5,65},{141,5,16385},{128,5,3},{136,5,513}, + {132,5,33},{140,5,8193},{130,5,9},{138,5,2049},{134,5,129}, + {142,5,32769},{128,5,2},{135,5,385},{131,5,25},{139,5,6145}, + {129,5,7},{137,5,1537},{133,5,97},{141,5,24577},{128,5,4}, + {136,5,769},{132,5,49},{140,5,12289},{130,5,13},{138,5,3073}, + {134,5,193},{142,5,49153} + }; diff --git a/common/dist/zlib/contrib/infback9/inflate9.h b/common/dist/zlib/contrib/infback9/inflate9.h new file mode 100644 index 000000000..73f49a188 --- /dev/null +++ b/common/dist/zlib/contrib/infback9/inflate9.h @@ -0,0 +1,49 @@ +/* $NetBSD: inflate9.h,v 1.1.1.1 2006/01/14 20:10:51 christos Exp $ */ + +/* inflate9.h -- internal inflate state definition + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Possible inflate modes between inflate() calls */ +typedef enum { + TYPE, /* i: waiting for type bits, including last-flag bit */ + STORED, /* i: waiting for stored size (length and complement) */ + TABLE, /* i: waiting for dynamic block table lengths */ + LEN, /* i: waiting for length/lit code */ + DONE, /* finished check, done -- remain here until reset */ + BAD /* got a data error -- remain here until reset */ +} inflate_mode; + +/* + State transitions between above modes - + + (most modes can go to the BAD mode -- not shown for clarity) + + Read deflate blocks: + TYPE -> STORED or TABLE or LEN or DONE + STORED -> TYPE + TABLE -> LENLENS -> CODELENS -> LEN + Read deflate codes: + LEN -> LEN or TYPE + */ + +/* state maintained between inflate() calls. Approximately 7K bytes. */ +struct inflate_state { + /* sliding window */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + /* dynamic table building */ + unsigned ncode; /* number of code length code lengths */ + unsigned nlen; /* number of length code lengths */ + unsigned ndist; /* number of distance code lengths */ + unsigned have; /* number of code lengths in lens[] */ + code FAR *next; /* next available space in codes[] */ + unsigned short lens[320]; /* temporary storage for code lengths */ + unsigned short work[288]; /* work area for code table building */ + code codes[ENOUGH]; /* space for code tables */ +}; diff --git a/common/dist/zlib/contrib/infback9/inftree9.c b/common/dist/zlib/contrib/infback9/inftree9.c new file mode 100644 index 000000000..153c9b115 --- /dev/null +++ b/common/dist/zlib/contrib/infback9/inftree9.c @@ -0,0 +1,325 @@ +/* $NetBSD: inftree9.c,v 1.1.1.1 2006/01/14 20:10:52 christos Exp $ */ + +/* inftree9.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftree9.h" + +#define MAXBITS 15 + +const char inflate9_copyright[] = + " inflate9 1.2.3 Copyright 1995-2005 Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* + Build a set of tables to decode the provided canonical Huffman code. + The code lengths are lens[0..codes-1]. The result starts at *table, + whose indices are 0..2^bits-1. work is a writable array of at least + lens shorts, which is used as a work area. type is the type of code + to be generated, CODES, LENS, or DISTS. On return, zero is success, + -1 is an invalid code, and +1 means that ENOUGH isn't enough. table + on return points to the next available entry's address. bits is the + requested root table index bits, and on return it is the actual root + table index bits. It will differ if the request is greater than the + longest code or if it is less than the shortest code. + */ +int inflate_table9(type, lens, codes, table, bits, work) +codetype type; +unsigned short FAR *lens; +unsigned codes; +code FAR * FAR *table; +unsigned FAR *bits; +unsigned short FAR *work; +{ + unsigned len; /* a code's length in bits */ + unsigned sym; /* index of code symbols */ + unsigned min, max; /* minimum and maximum code lengths */ + unsigned root; /* number of index bits for root table */ + unsigned curr; /* number of index bits for current table */ + unsigned drop; /* code bits to drop for sub-table */ + int left; /* number of prefix codes available */ + unsigned used; /* code entries in table used */ + unsigned huff; /* Huffman code */ + unsigned incr; /* for incrementing code, index */ + unsigned fill; /* index for replicating entries */ + unsigned low; /* low bits for current root entry */ + unsigned mask; /* mask for low root bits */ + code this; /* table entry for duplication */ + code FAR *next; /* next available space in table */ + const unsigned short FAR *base; /* base value table to use */ + const unsigned short FAR *extra; /* extra bits table to use */ + int end; /* use base and extra for symbol > end */ + unsigned short count[MAXBITS+1]; /* number of codes of each length */ + unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ + static const unsigned short lbase[31] = { /* Length codes 257..285 base */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, + 19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115, + 131, 163, 195, 227, 3, 0, 0}; + static const unsigned short lext[31] = { /* Length codes 257..285 extra */ + 128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129, + 130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132, + 133, 133, 133, 133, 144, 201, 196}; + static const unsigned short dbase[32] = { /* Distance codes 0..31 base */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, + 65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073, + 4097, 6145, 8193, 12289, 16385, 24577, 32769, 49153}; + static const unsigned short dext[32] = { /* Distance codes 0..31 extra */ + 128, 128, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132, + 133, 133, 134, 134, 135, 135, 136, 136, 137, 137, 138, 138, + 139, 139, 140, 140, 141, 141, 142, 142}; + + /* + Process a set of code lengths to create a canonical Huffman code. The + code lengths are lens[0..codes-1]. Each length corresponds to the + symbols 0..codes-1. The Huffman code is generated by first sorting the + symbols by length from short to long, and retaining the symbol order + for codes with equal lengths. Then the code starts with all zero bits + for the first code of the shortest length, and the codes are integer + increments for the same length, and zeros are appended as the length + increases. For the deflate format, these bits are stored backwards + from their more natural integer increment ordering, and so when the + decoding tables are built in the large loop below, the integer codes + are incremented backwards. + + This routine assumes, but does not check, that all of the entries in + lens[] are in the range 0..MAXBITS. The caller must assure this. + 1..MAXBITS is interpreted as that code length. zero means that that + symbol does not occur in this code. + + The codes are sorted by computing a count of codes for each length, + creating from that a table of starting indices for each length in the + sorted table, and then entering the symbols in order in the sorted + table. The sorted table is work[], with that space being provided by + the caller. + + The length counts are used for other purposes as well, i.e. finding + the minimum and maximum length codes, determining if there are any + codes at all, checking for a valid set of lengths, and looking ahead + at length counts to determine sub-table sizes when building the + decoding tables. + */ + + /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ + for (len = 0; len <= MAXBITS; len++) + count[len] = 0; + for (sym = 0; sym < codes; sym++) + count[lens[sym]]++; + + /* bound code lengths, force root to be within code lengths */ + root = *bits; + for (max = MAXBITS; max >= 1; max--) + if (count[max] != 0) break; + if (root > max) root = max; + if (max == 0) return -1; /* no codes! */ + for (min = 1; min <= MAXBITS; min++) + if (count[min] != 0) break; + if (root < min) root = min; + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; + left -= count[len]; + if (left < 0) return -1; /* over-subscribed */ + } + if (left > 0 && (type == CODES || max != 1)) + return -1; /* incomplete set */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + count[len]; + + /* sort symbols by length, by symbol order within each length */ + for (sym = 0; sym < codes; sym++) + if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; + + /* + Create and fill in decoding tables. In this loop, the table being + filled is at next and has curr index bits. The code being used is huff + with length len. That code is converted to an index by dropping drop + bits off of the bottom. For codes where len is less than drop + curr, + those top drop + curr - len bits are incremented through all values to + fill the table with replicated entries. + + root is the number of index bits for the root table. When len exceeds + root, sub-tables are created pointed to by the root entry with an index + of the low root bits of huff. This is saved in low to check for when a + new sub-table should be started. drop is zero when the root table is + being filled, and drop is root when sub-tables are being filled. + + When a new sub-table is needed, it is necessary to look ahead in the + code lengths to determine what size sub-table is needed. The length + counts are used for this, and so count[] is decremented as codes are + entered in the tables. + + used keeps track of how many table entries have been allocated from the + provided *table space. It is checked when a LENS table is being made + against the space in *table, ENOUGH, minus the maximum space needed by + the worst case distance code, MAXD. This should never happen, but the + sufficiency of ENOUGH has not been proven exhaustively, hence the check. + This assumes that when type == LENS, bits == 9. + + sym increments through all symbols, and the loop terminates when + all codes of length max, i.e. all codes, have been processed. This + routine permits incomplete codes, so another loop after this one fills + in the rest of the decoding tables with invalid code markers. + */ + + /* set up for code type */ + switch (type) { + case CODES: + base = extra = work; /* dummy value--not used */ + end = 19; + break; + case LENS: + base = lbase; + base -= 257; + extra = lext; + extra -= 257; + end = 256; + break; + default: /* DISTS */ + base = dbase; + extra = dext; + end = -1; + } + + /* initialize state for loop */ + huff = 0; /* starting code */ + sym = 0; /* starting code symbol */ + len = min; /* starting code length */ + next = *table; /* current table to fill in */ + curr = root; /* current table index bits */ + drop = 0; /* current bits to drop from code for index */ + low = (unsigned)(-1); /* trigger new sub-table when len > root */ + used = 1U << root; /* use root table entries */ + mask = used - 1; /* mask for comparing low */ + + /* check available table space */ + if (type == LENS && used >= ENOUGH - MAXD) + return 1; + + /* process all codes and make table entries */ + for (;;) { + /* create table entry */ + this.bits = (unsigned char)(len - drop); + if ((int)(work[sym]) < end) { + this.op = (unsigned char)0; + this.val = work[sym]; + } + else if ((int)(work[sym]) > end) { + this.op = (unsigned char)(extra[work[sym]]); + this.val = base[work[sym]]; + } + else { + this.op = (unsigned char)(32 + 64); /* end of block */ + this.val = 0; + } + + /* replicate for those indices with low len bits equal to huff */ + incr = 1U << (len - drop); + fill = 1U << curr; + do { + fill -= incr; + next[(huff >> drop) + fill] = this; + } while (fill != 0); + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + + /* go to next symbol, update count, len */ + sym++; + if (--(count[len]) == 0) { + if (len == max) break; + len = lens[work[sym]]; + } + + /* create new sub-table if needed */ + if (len > root && (huff & mask) != low) { + /* if first time, transition to sub-tables */ + if (drop == 0) + drop = root; + + /* increment past last table */ + next += 1U << curr; + + /* determine length of next table */ + curr = len - drop; + left = (int)(1 << curr); + while (curr + drop < max) { + left -= count[curr + drop]; + if (left <= 0) break; + curr++; + left <<= 1; + } + + /* check for enough space */ + used += 1U << curr; + if (type == LENS && used >= ENOUGH - MAXD) + return 1; + + /* point entry in root table to sub-table */ + low = huff & mask; + (*table)[low].op = (unsigned char)curr; + (*table)[low].bits = (unsigned char)root; + (*table)[low].val = (unsigned short)(next - *table); + } + } + + /* + Fill in rest of table for incomplete codes. This loop is similar to the + loop above in incrementing huff for table indices. It is assumed that + len is equal to curr + drop, so there is no loop needed to increment + through high index bits. When the current sub-table is filled, the loop + drops back to the root table to fill in any remaining entries there. + */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)(len - drop); + this.val = (unsigned short)0; + while (huff != 0) { + /* when done with sub-table, drop back to root table */ + if (drop != 0 && (huff & mask) != low) { + drop = 0; + len = root; + next = *table; + curr = root; + this.bits = (unsigned char)len; + } + + /* put invalid code marker in table */ + next[huff >> drop] = this; + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + } + + /* set return parameters */ + *table += used; + *bits = root; + return 0; +} diff --git a/common/dist/zlib/contrib/infback9/inftree9.h b/common/dist/zlib/contrib/infback9/inftree9.h new file mode 100644 index 000000000..de01b32b6 --- /dev/null +++ b/common/dist/zlib/contrib/infback9/inftree9.h @@ -0,0 +1,57 @@ +/* $NetBSD: inftree9.h,v 1.1.1.1 2006/01/14 20:10:52 christos Exp $ */ + +/* inftree9.h -- header to use inftree9.c + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Structure for decoding tables. Each entry provides either the + information needed to do the operation requested by the code that + indexed that table entry, or it provides a pointer to another + table that indexes more bits of the code. op indicates whether + the entry is a pointer to another table, a literal, a length or + distance, an end-of-block, or an invalid code. For a table + pointer, the low four bits of op is the number of index bits of + that table. For a length or distance, the low four bits of op + is the number of extra bits to get after the code. bits is + the number of bits in this code or part of the code to drop off + of the bit buffer. val is the actual byte to output in the case + of a literal, the base length or distance, or the offset from + the current table to the next table. Each entry is four bytes. */ +typedef struct { + unsigned char op; /* operation, extra bits, table bits */ + unsigned char bits; /* bits in this part of the code */ + unsigned short val; /* offset in table or code value */ +} code; + +/* op values as set by inflate_table(): + 00000000 - literal + 0000tttt - table link, tttt != 0 is the number of table index bits + 100eeeee - length or distance, eeee is the number of extra bits + 01100000 - end of block + 01000000 - invalid code + */ + +/* Maximum size of dynamic tree. The maximum found in a long but non- + exhaustive search was 1444 code structures (852 for length/literals + and 592 for distances, the latter actually the result of an + exhaustive search). The true maximum is not known, but the value + below is more than safe. */ +#define ENOUGH 2048 +#define MAXD 592 + +/* Type of code to build for inftable() */ +typedef enum { + CODES, + LENS, + DISTS +} codetype; + +extern int inflate_table9 OF((codetype type, unsigned short FAR *lens, + unsigned codes, code FAR * FAR *table, + unsigned FAR *bits, unsigned short FAR *work)); diff --git a/common/dist/zlib/contrib/inflate86/inffas86.c b/common/dist/zlib/contrib/inflate86/inffas86.c new file mode 100644 index 000000000..466d76937 --- /dev/null +++ b/common/dist/zlib/contrib/inflate86/inffas86.c @@ -0,0 +1,1159 @@ +/* $NetBSD: inffas86.c,v 1.1.1.1 2006/01/14 20:10:53 christos Exp $ */ + +/* inffas86.c is a hand tuned assembler version of + * + * inffast.c -- fast decoding + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Copyright (C) 2003 Chris Anderson + * Please use the copyright conditions above. + * + * Dec-29-2003 -- I added AMD64 inflate asm support. This version is also + * slightly quicker on x86 systems because, instead of using rep movsb to copy + * data, it uses rep movsw, which moves data in 2-byte chunks instead of single + * bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates + * from http://fedora.linux.duke.edu/fc1_x86_64 + * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with + * 1GB ram. The 64-bit version is about 4% faster than the 32-bit version, + * when decompressing mozilla-source-1.3.tar.gz. + * + * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from + * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at + * the moment. I have successfully compiled and tested this code with gcc2.96, + * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S + * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX + * enabled. I will attempt to merge the MMX code into this version. Newer + * versions of this and inffast.S can be found at + * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +/* Mark Adler's comments from inffast.c: */ + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ +void inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + struct inffast_ar { +/* 64 32 x86 x86_64 */ +/* ar offset register */ +/* 0 0 */ void *esp; /* esp save */ +/* 8 4 */ void *ebp; /* ebp save */ +/* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */ +/* 24 12 */ unsigned char FAR *last; /* r9 while in < last */ +/* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */ +/* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */ +/* 48 24 */ unsigned char FAR *end; /* r10 while out < end */ +/* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */ +/* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */ +/* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */ +/* 80 40 */ unsigned long hold; /* edx rdx local strm->hold */ +/* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */ +/* 92 48 */ unsigned wsize; /* window size */ +/* 96 52 */ unsigned write; /* window write index */ +/*100 56 */ unsigned lmask; /* r12 mask for lcode */ +/*104 60 */ unsigned dmask; /* r13 mask for dcode */ +/*108 64 */ unsigned len; /* r14 match length */ +/*112 68 */ unsigned dist; /* r15 match distance */ +/*116 72 */ unsigned status; /* set when state chng*/ + } ar; + +#if defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 ) +#define PAD_AVAIL_IN 6 +#define PAD_AVAIL_OUT 258 +#else +#define PAD_AVAIL_IN 5 +#define PAD_AVAIL_OUT 257 +#endif + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + ar.in = strm->next_in; + ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN); + ar.out = strm->next_out; + ar.beg = ar.out - (start - strm->avail_out); + ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT); + ar.wsize = state->wsize; + ar.write = state->write; + ar.window = state->window; + ar.hold = state->hold; + ar.bits = state->bits; + ar.lcode = state->lencode; + ar.dcode = state->distcode; + ar.lmask = (1U << state->lenbits) - 1; + ar.dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + + /* align in on 1/2 hold size boundary */ + while (((unsigned long)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) { + ar.hold += (unsigned long)*ar.in++ << ar.bits; + ar.bits += 8; + } + +#if defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 ) + __asm__ __volatile__ ( +" leaq %0, %%rax\n" +" movq %%rbp, 8(%%rax)\n" /* save regs rbp and rsp */ +" movq %%rsp, (%%rax)\n" +" movq %%rax, %%rsp\n" /* make rsp point to &ar */ +" movq 16(%%rsp), %%rsi\n" /* rsi = in */ +" movq 32(%%rsp), %%rdi\n" /* rdi = out */ +" movq 24(%%rsp), %%r9\n" /* r9 = last */ +" movq 48(%%rsp), %%r10\n" /* r10 = end */ +" movq 64(%%rsp), %%rbp\n" /* rbp = lcode */ +" movq 72(%%rsp), %%r11\n" /* r11 = dcode */ +" movq 80(%%rsp), %%rdx\n" /* rdx = hold */ +" movl 88(%%rsp), %%ebx\n" /* ebx = bits */ +" movl 100(%%rsp), %%r12d\n" /* r12d = lmask */ +" movl 104(%%rsp), %%r13d\n" /* r13d = dmask */ + /* r14d = len */ + /* r15d = dist */ +" cld\n" +" cmpq %%rdi, %%r10\n" +" je .L_one_time\n" /* if only one decode left */ +" cmpq %%rsi, %%r9\n" +" je .L_one_time\n" +" jmp .L_do_loop\n" + +".L_one_time:\n" +" movq %%r12, %%r8\n" /* r8 = lmask */ +" cmpb $32, %%bl\n" +" ja .L_get_length_code_one_time\n" + +" lodsl\n" /* eax = *(uint *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $32, %%bl\n" /* bits += 32 */ +" shlq %%cl, %%rax\n" +" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */ +" jmp .L_get_length_code_one_time\n" + +".align 32,0x90\n" +".L_while_test:\n" +" cmpq %%rdi, %%r10\n" +" jbe .L_break_loop\n" +" cmpq %%rsi, %%r9\n" +" jbe .L_break_loop\n" + +".L_do_loop:\n" +" movq %%r12, %%r8\n" /* r8 = lmask */ +" cmpb $32, %%bl\n" +" ja .L_get_length_code\n" /* if (32 < bits) */ + +" lodsl\n" /* eax = *(uint *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $32, %%bl\n" /* bits += 32 */ +" shlq %%cl, %%rax\n" +" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */ + +".L_get_length_code:\n" +" andq %%rdx, %%r8\n" /* r8 &= hold */ +" movl (%%rbp,%%r8,4), %%eax\n" /* eax = lcode[hold & lmask] */ + +" movb %%ah, %%cl\n" /* cl = this.bits */ +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrq %%cl, %%rdx\n" /* hold >>= this.bits */ + +" testb %%al, %%al\n" +" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */ + +" movq %%r12, %%r8\n" /* r8 = lmask */ +" shrl $16, %%eax\n" /* output this.val char */ +" stosb\n" + +".L_get_length_code_one_time:\n" +" andq %%rdx, %%r8\n" /* r8 &= hold */ +" movl (%%rbp,%%r8,4), %%eax\n" /* eax = lcode[hold & lmask] */ + +".L_dolen:\n" +" movb %%ah, %%cl\n" /* cl = this.bits */ +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrq %%cl, %%rdx\n" /* hold >>= this.bits */ + +" testb %%al, %%al\n" +" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */ + +" shrl $16, %%eax\n" /* output this.val char */ +" stosb\n" +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_length_base:\n" +" movl %%eax, %%r14d\n" /* len = this */ +" shrl $16, %%r14d\n" /* len = this.val */ +" movb %%al, %%cl\n" + +" testb $16, %%al\n" +" jz .L_test_for_second_level_length\n" /* if ((op & 16) == 0) 8% */ +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_decode_distance\n" /* if (!op) */ + +".L_add_bits_to_len:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrq %%cl, %%rdx\n" +" addl %%eax, %%r14d\n" /* len += hold & mask[op] */ + +".L_decode_distance:\n" +" movq %%r13, %%r8\n" /* r8 = dmask */ +" cmpb $32, %%bl\n" +" ja .L_get_distance_code\n" /* if (32 < bits) */ + +" lodsl\n" /* eax = *(uint *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $32, %%bl\n" /* bits += 32 */ +" shlq %%cl, %%rax\n" +" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */ + +".L_get_distance_code:\n" +" andq %%rdx, %%r8\n" /* r8 &= hold */ +" movl (%%r11,%%r8,4), %%eax\n" /* eax = dcode[hold & dmask] */ + +".L_dodist:\n" +" movl %%eax, %%r15d\n" /* dist = this */ +" shrl $16, %%r15d\n" /* dist = this.val */ +" movb %%ah, %%cl\n" +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrq %%cl, %%rdx\n" /* hold >>= this.bits */ +" movb %%al, %%cl\n" /* cl = this.op */ + +" testb $16, %%al\n" /* if ((op & 16) == 0) */ +" jz .L_test_for_second_level_dist\n" +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_check_dist_one\n" + +".L_add_bits_to_dist:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" /* (1 << op) - 1 */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrq %%cl, %%rdx\n" +" addl %%eax, %%r15d\n" /* dist += hold & ((1 << op) - 1) */ + +".L_check_window:\n" +" movq %%rsi, %%r8\n" /* save in so from can use it's reg */ +" movq %%rdi, %%rax\n" +" subq 40(%%rsp), %%rax\n" /* nbytes = out - beg */ + +" cmpl %%r15d, %%eax\n" +" jb .L_clip_window\n" /* if (dist > nbytes) 4.2% */ + +" movl %%r14d, %%ecx\n" /* ecx = len */ +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = out - dist */ + +" sarl %%ecx\n" +" jnc .L_copy_two\n" /* if len % 2 == 0 */ + +" rep movsw\n" +" movb (%%rsi), %%al\n" +" movb %%al, (%%rdi)\n" +" incq %%rdi\n" + +" movq %%r8, %%rsi\n" /* move in back to %rsi, toss from */ +" jmp .L_while_test\n" + +".L_copy_two:\n" +" rep movsw\n" +" movq %%r8, %%rsi\n" /* move in back to %rsi, toss from */ +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_check_dist_one:\n" +" cmpl $1, %%r15d\n" /* if dist 1, is a memset */ +" jne .L_check_window\n" +" cmpq %%rdi, 40(%%rsp)\n" /* if out == beg, outside window */ +" je .L_check_window\n" + +" movl %%r14d, %%ecx\n" /* ecx = len */ +" movb -1(%%rdi), %%al\n" +" movb %%al, %%ah\n" + +" sarl %%ecx\n" +" jnc .L_set_two\n" +" movb %%al, (%%rdi)\n" +" incq %%rdi\n" + +".L_set_two:\n" +" rep stosw\n" +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_second_level_length:\n" +" testb $64, %%al\n" +" jnz .L_test_for_end_of_block\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl %%r14d, %%eax\n" /* eax += len */ +" movl (%%rbp,%%rax,4), %%eax\n" /* eax = lcode[val+(hold&mask[op])]*/ +" jmp .L_dolen\n" + +".align 32,0x90\n" +".L_test_for_second_level_dist:\n" +" testb $64, %%al\n" +" jnz .L_invalid_distance_code\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl %%r15d, %%eax\n" /* eax += dist */ +" movl (%%r11,%%rax,4), %%eax\n" /* eax = dcode[val+(hold&mask[op])]*/ +" jmp .L_dodist\n" + +".align 32,0x90\n" +".L_clip_window:\n" +" movl %%eax, %%ecx\n" /* ecx = nbytes */ +" movl 92(%%rsp), %%eax\n" /* eax = wsize, prepare for dist cmp */ +" negl %%ecx\n" /* nbytes = -nbytes */ + +" cmpl %%r15d, %%eax\n" +" jb .L_invalid_distance_too_far\n" /* if (dist > wsize) */ + +" addl %%r15d, %%ecx\n" /* nbytes = dist - nbytes */ +" cmpl $0, 96(%%rsp)\n" +" jne .L_wrap_around_window\n" /* if (write != 0) */ + +" movq 56(%%rsp), %%rsi\n" /* from = window */ +" subl %%ecx, %%eax\n" /* eax -= nbytes */ +" addq %%rax, %%rsi\n" /* from += wsize - nbytes */ + +" movl %%r14d, %%eax\n" /* eax = len */ +" cmpl %%ecx, %%r14d\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* eax -= nbytes */ +" rep movsb\n" +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = &out[ -dist ] */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_wrap_around_window:\n" +" movl 96(%%rsp), %%eax\n" /* eax = write */ +" cmpl %%eax, %%ecx\n" +" jbe .L_contiguous_in_window\n" /* if (write >= nbytes) */ + +" movl 92(%%rsp), %%esi\n" /* from = wsize */ +" addq 56(%%rsp), %%rsi\n" /* from += window */ +" addq %%rax, %%rsi\n" /* from += write */ +" subq %%rcx, %%rsi\n" /* from -= nbytes */ +" subl %%eax, %%ecx\n" /* nbytes -= write */ + +" movl %%r14d, %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movq 56(%%rsp), %%rsi\n" /* from = window */ +" movl 96(%%rsp), %%ecx\n" /* nbytes = write */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = out - dist */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_contiguous_in_window:\n" +" movq 56(%%rsp), %%rsi\n" /* rsi = window */ +" addq %%rax, %%rsi\n" +" subq %%rcx, %%rsi\n" /* from += write - nbytes */ + +" movl %%r14d, %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = out - dist */ +" jmp .L_do_copy\n" /* if (nbytes >= len) */ + +".align 32,0x90\n" +".L_do_copy:\n" +" movl %%eax, %%ecx\n" /* ecx = len */ +" rep movsb\n" + +" movq %%r8, %%rsi\n" /* move in back to %esi, toss from */ +" jmp .L_while_test\n" + +".L_test_for_end_of_block:\n" +" testb $32, %%al\n" +" jz .L_invalid_literal_length_code\n" +" movl $1, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_literal_length_code:\n" +" movl $2, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_code:\n" +" movl $3, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_too_far:\n" +" movl $4, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_break_loop:\n" +" movl $0, 116(%%rsp)\n" + +".L_break_loop_with_status:\n" +/* put in, out, bits, and hold back into ar and pop esp */ +" movq %%rsi, 16(%%rsp)\n" /* in */ +" movq %%rdi, 32(%%rsp)\n" /* out */ +" movl %%ebx, 88(%%rsp)\n" /* bits */ +" movq %%rdx, 80(%%rsp)\n" /* hold */ +" movq (%%rsp), %%rax\n" /* restore rbp and rsp */ +" movq 8(%%rsp), %%rbp\n" +" movq %%rax, %%rsp\n" + : + : "m" (ar) + : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", + "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15" + ); +#elif ( defined( __GNUC__ ) || defined( __ICC ) ) && defined( __i386 ) + __asm__ __volatile__ ( +" leal %0, %%eax\n" +" movl %%esp, (%%eax)\n" /* save esp, ebp */ +" movl %%ebp, 4(%%eax)\n" +" movl %%eax, %%esp\n" +" movl 8(%%esp), %%esi\n" /* esi = in */ +" movl 16(%%esp), %%edi\n" /* edi = out */ +" movl 40(%%esp), %%edx\n" /* edx = hold */ +" movl 44(%%esp), %%ebx\n" /* ebx = bits */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ + +" cld\n" +" jmp .L_do_loop\n" + +".align 32,0x90\n" +".L_while_test:\n" +" cmpl %%edi, 24(%%esp)\n" /* out < end */ +" jbe .L_break_loop\n" +" cmpl %%esi, 12(%%esp)\n" /* in < last */ +" jbe .L_break_loop\n" + +".L_do_loop:\n" +" cmpb $15, %%bl\n" +" ja .L_get_length_code\n" /* if (15 < bits) */ + +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ + +".L_get_length_code:\n" +" movl 56(%%esp), %%eax\n" /* eax = lmask */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" movl (%%ebp,%%eax,4), %%eax\n" /* eax = lcode[hold & lmask] */ + +".L_dolen:\n" +" movb %%ah, %%cl\n" /* cl = this.bits */ +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrl %%cl, %%edx\n" /* hold >>= this.bits */ + +" testb %%al, %%al\n" +" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */ + +" shrl $16, %%eax\n" /* output this.val char */ +" stosb\n" +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_length_base:\n" +" movl %%eax, %%ecx\n" /* len = this */ +" shrl $16, %%ecx\n" /* len = this.val */ +" movl %%ecx, 64(%%esp)\n" /* save len */ +" movb %%al, %%cl\n" + +" testb $16, %%al\n" +" jz .L_test_for_second_level_length\n" /* if ((op & 16) == 0) 8% */ +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_decode_distance\n" /* if (!op) */ +" cmpb %%cl, %%bl\n" +" jae .L_add_bits_to_len\n" /* if (op <= bits) */ + +" movb %%cl, %%ch\n" /* stash op in ch, freeing cl */ +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ +" movb %%ch, %%cl\n" /* move op back to ecx */ + +".L_add_bits_to_len:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrl %%cl, %%edx\n" +" addl %%eax, 64(%%esp)\n" /* len += hold & mask[op] */ + +".L_decode_distance:\n" +" cmpb $15, %%bl\n" +" ja .L_get_distance_code\n" /* if (15 < bits) */ + +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ + +".L_get_distance_code:\n" +" movl 60(%%esp), %%eax\n" /* eax = dmask */ +" movl 36(%%esp), %%ecx\n" /* ecx = dcode */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" movl (%%ecx,%%eax,4), %%eax\n"/* eax = dcode[hold & dmask] */ + +".L_dodist:\n" +" movl %%eax, %%ebp\n" /* dist = this */ +" shrl $16, %%ebp\n" /* dist = this.val */ +" movb %%ah, %%cl\n" +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrl %%cl, %%edx\n" /* hold >>= this.bits */ +" movb %%al, %%cl\n" /* cl = this.op */ + +" testb $16, %%al\n" /* if ((op & 16) == 0) */ +" jz .L_test_for_second_level_dist\n" +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_check_dist_one\n" +" cmpb %%cl, %%bl\n" +" jae .L_add_bits_to_dist\n" /* if (op <= bits) 97.6% */ + +" movb %%cl, %%ch\n" /* stash op in ch, freeing cl */ +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ +" movb %%ch, %%cl\n" /* move op back to ecx */ + +".L_add_bits_to_dist:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" /* (1 << op) - 1 */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrl %%cl, %%edx\n" +" addl %%eax, %%ebp\n" /* dist += hold & ((1 << op) - 1) */ + +".L_check_window:\n" +" movl %%esi, 8(%%esp)\n" /* save in so from can use it's reg */ +" movl %%edi, %%eax\n" +" subl 20(%%esp), %%eax\n" /* nbytes = out - beg */ + +" cmpl %%ebp, %%eax\n" +" jb .L_clip_window\n" /* if (dist > nbytes) 4.2% */ + +" movl 64(%%esp), %%ecx\n" /* ecx = len */ +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ + +" sarl %%ecx\n" +" jnc .L_copy_two\n" /* if len % 2 == 0 */ + +" rep movsw\n" +" movb (%%esi), %%al\n" +" movb %%al, (%%edi)\n" +" incl %%edi\n" + +" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".L_copy_two:\n" +" rep movsw\n" +" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_check_dist_one:\n" +" cmpl $1, %%ebp\n" /* if dist 1, is a memset */ +" jne .L_check_window\n" +" cmpl %%edi, 20(%%esp)\n" +" je .L_check_window\n" /* out == beg, if outside window */ + +" movl 64(%%esp), %%ecx\n" /* ecx = len */ +" movb -1(%%edi), %%al\n" +" movb %%al, %%ah\n" + +" sarl %%ecx\n" +" jnc .L_set_two\n" +" movb %%al, (%%edi)\n" +" incl %%edi\n" + +".L_set_two:\n" +" rep stosw\n" +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_second_level_length:\n" +" testb $64, %%al\n" +" jnz .L_test_for_end_of_block\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl 64(%%esp), %%eax\n" /* eax += len */ +" movl (%%ebp,%%eax,4), %%eax\n" /* eax = lcode[val+(hold&mask[op])]*/ +" jmp .L_dolen\n" + +".align 32,0x90\n" +".L_test_for_second_level_dist:\n" +" testb $64, %%al\n" +" jnz .L_invalid_distance_code\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl %%ebp, %%eax\n" /* eax += dist */ +" movl 36(%%esp), %%ecx\n" /* ecx = dcode */ +" movl (%%ecx,%%eax,4), %%eax\n" /* eax = dcode[val+(hold&mask[op])]*/ +" jmp .L_dodist\n" + +".align 32,0x90\n" +".L_clip_window:\n" +" movl %%eax, %%ecx\n" +" movl 48(%%esp), %%eax\n" /* eax = wsize */ +" negl %%ecx\n" /* nbytes = -nbytes */ +" movl 28(%%esp), %%esi\n" /* from = window */ + +" cmpl %%ebp, %%eax\n" +" jb .L_invalid_distance_too_far\n" /* if (dist > wsize) */ + +" addl %%ebp, %%ecx\n" /* nbytes = dist - nbytes */ +" cmpl $0, 52(%%esp)\n" +" jne .L_wrap_around_window\n" /* if (write != 0) */ + +" subl %%ecx, %%eax\n" +" addl %%eax, %%esi\n" /* from += wsize - nbytes */ + +" movl 64(%%esp), %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_wrap_around_window:\n" +" movl 52(%%esp), %%eax\n" /* eax = write */ +" cmpl %%eax, %%ecx\n" +" jbe .L_contiguous_in_window\n" /* if (write >= nbytes) */ + +" addl 48(%%esp), %%esi\n" /* from += wsize */ +" addl %%eax, %%esi\n" /* from += write */ +" subl %%ecx, %%esi\n" /* from -= nbytes */ +" subl %%eax, %%ecx\n" /* nbytes -= write */ + +" movl 64(%%esp), %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl 28(%%esp), %%esi\n" /* from = window */ +" movl 52(%%esp), %%ecx\n" /* nbytes = write */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_contiguous_in_window:\n" +" addl %%eax, %%esi\n" +" subl %%ecx, %%esi\n" /* from += write - nbytes */ + +" movl 64(%%esp), %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ +" jmp .L_do_copy\n" /* if (nbytes >= len) */ + +".align 32,0x90\n" +".L_do_copy:\n" +" movl %%eax, %%ecx\n" +" rep movsb\n" + +" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".L_test_for_end_of_block:\n" +" testb $32, %%al\n" +" jz .L_invalid_literal_length_code\n" +" movl $1, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_literal_length_code:\n" +" movl $2, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_code:\n" +" movl $3, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_too_far:\n" +" movl 8(%%esp), %%esi\n" +" movl $4, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_break_loop:\n" +" movl $0, 72(%%esp)\n" + +".L_break_loop_with_status:\n" +/* put in, out, bits, and hold back into ar and pop esp */ +" movl %%esi, 8(%%esp)\n" /* save in */ +" movl %%edi, 16(%%esp)\n" /* save out */ +" movl %%ebx, 44(%%esp)\n" /* save bits */ +" movl %%edx, 40(%%esp)\n" /* save hold */ +" movl 4(%%esp), %%ebp\n" /* restore esp, ebp */ +" movl (%%esp), %%esp\n" + : + : "m" (ar) + : "memory", "%eax", "%ebx", "%ecx", "%edx", "%esi", "%edi" + ); +#elif defined( _MSC_VER ) && ! defined( _M_AMD64 ) + __asm { + lea eax, ar + mov [eax], esp /* save esp, ebp */ + mov [eax+4], ebp + mov esp, eax + mov esi, [esp+8] /* esi = in */ + mov edi, [esp+16] /* edi = out */ + mov edx, [esp+40] /* edx = hold */ + mov ebx, [esp+44] /* ebx = bits */ + mov ebp, [esp+32] /* ebp = lcode */ + + cld + jmp L_do_loop + +ALIGN 4 +L_while_test: + cmp [esp+24], edi + jbe L_break_loop + cmp [esp+12], esi + jbe L_break_loop + +L_do_loop: + cmp bl, 15 + ja L_get_length_code /* if (15 < bits) */ + + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + +L_get_length_code: + mov eax, [esp+56] /* eax = lmask */ + and eax, edx /* eax &= hold */ + mov eax, [ebp+eax*4] /* eax = lcode[hold & lmask] */ + +L_dolen: + mov cl, ah /* cl = this.bits */ + sub bl, ah /* bits -= this.bits */ + shr edx, cl /* hold >>= this.bits */ + + test al, al + jnz L_test_for_length_base /* if (op != 0) 45.7% */ + + shr eax, 16 /* output this.val char */ + stosb + jmp L_while_test + +ALIGN 4 +L_test_for_length_base: + mov ecx, eax /* len = this */ + shr ecx, 16 /* len = this.val */ + mov [esp+64], ecx /* save len */ + mov cl, al + + test al, 16 + jz L_test_for_second_level_length /* if ((op & 16) == 0) 8% */ + and cl, 15 /* op &= 15 */ + jz L_decode_distance /* if (!op) */ + cmp bl, cl + jae L_add_bits_to_len /* if (op <= bits) */ + + mov ch, cl /* stash op in ch, freeing cl */ + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + mov cl, ch /* move op back to ecx */ + +L_add_bits_to_len: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx /* eax &= hold */ + shr edx, cl + add [esp+64], eax /* len += hold & mask[op] */ + +L_decode_distance: + cmp bl, 15 + ja L_get_distance_code /* if (15 < bits) */ + + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + +L_get_distance_code: + mov eax, [esp+60] /* eax = dmask */ + mov ecx, [esp+36] /* ecx = dcode */ + and eax, edx /* eax &= hold */ + mov eax, [ecx+eax*4]/* eax = dcode[hold & dmask] */ + +L_dodist: + mov ebp, eax /* dist = this */ + shr ebp, 16 /* dist = this.val */ + mov cl, ah + sub bl, ah /* bits -= this.bits */ + shr edx, cl /* hold >>= this.bits */ + mov cl, al /* cl = this.op */ + + test al, 16 /* if ((op & 16) == 0) */ + jz L_test_for_second_level_dist + and cl, 15 /* op &= 15 */ + jz L_check_dist_one + cmp bl, cl + jae L_add_bits_to_dist /* if (op <= bits) 97.6% */ + + mov ch, cl /* stash op in ch, freeing cl */ + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + mov cl, ch /* move op back to ecx */ + +L_add_bits_to_dist: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax /* (1 << op) - 1 */ + and eax, edx /* eax &= hold */ + shr edx, cl + add ebp, eax /* dist += hold & ((1 << op) - 1) */ + +L_check_window: + mov [esp+8], esi /* save in so from can use it's reg */ + mov eax, edi + sub eax, [esp+20] /* nbytes = out - beg */ + + cmp eax, ebp + jb L_clip_window /* if (dist > nbytes) 4.2% */ + + mov ecx, [esp+64] /* ecx = len */ + mov esi, edi + sub esi, ebp /* from = out - dist */ + + sar ecx, 1 + jnc L_copy_two + + rep movsw + mov al, [esi] + mov [edi], al + inc edi + + mov esi, [esp+8] /* move in back to %esi, toss from */ + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +L_copy_two: + rep movsw + mov esi, [esp+8] /* move in back to %esi, toss from */ + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +ALIGN 4 +L_check_dist_one: + cmp ebp, 1 /* if dist 1, is a memset */ + jne L_check_window + cmp [esp+20], edi + je L_check_window /* out == beg, if outside window */ + + mov ecx, [esp+64] /* ecx = len */ + mov al, [edi-1] + mov ah, al + + sar ecx, 1 + jnc L_set_two + mov [edi], al /* memset out with from[-1] */ + inc edi + +L_set_two: + rep stosw + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +ALIGN 4 +L_test_for_second_level_length: + test al, 64 + jnz L_test_for_end_of_block /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx /* eax &= hold */ + add eax, [esp+64] /* eax += len */ + mov eax, [ebp+eax*4] /* eax = lcode[val+(hold&mask[op])]*/ + jmp L_dolen + +ALIGN 4 +L_test_for_second_level_dist: + test al, 64 + jnz L_invalid_distance_code /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx /* eax &= hold */ + add eax, ebp /* eax += dist */ + mov ecx, [esp+36] /* ecx = dcode */ + mov eax, [ecx+eax*4] /* eax = dcode[val+(hold&mask[op])]*/ + jmp L_dodist + +ALIGN 4 +L_clip_window: + mov ecx, eax + mov eax, [esp+48] /* eax = wsize */ + neg ecx /* nbytes = -nbytes */ + mov esi, [esp+28] /* from = window */ + + cmp eax, ebp + jb L_invalid_distance_too_far /* if (dist > wsize) */ + + add ecx, ebp /* nbytes = dist - nbytes */ + cmp dword ptr [esp+52], 0 + jne L_wrap_around_window /* if (write != 0) */ + + sub eax, ecx + add esi, eax /* from += wsize - nbytes */ + + mov eax, [esp+64] /* eax = len */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, edi + sub esi, ebp /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_wrap_around_window: + mov eax, [esp+52] /* eax = write */ + cmp ecx, eax + jbe L_contiguous_in_window /* if (write >= nbytes) */ + + add esi, [esp+48] /* from += wsize */ + add esi, eax /* from += write */ + sub esi, ecx /* from -= nbytes */ + sub ecx, eax /* nbytes -= write */ + + mov eax, [esp+64] /* eax = len */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, [esp+28] /* from = window */ + mov ecx, [esp+52] /* nbytes = write */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, edi + sub esi, ebp /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_contiguous_in_window: + add esi, eax + sub esi, ecx /* from += write - nbytes */ + + mov eax, [esp+64] /* eax = len */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, edi + sub esi, ebp /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_do_copy: + mov ecx, eax + rep movsb + + mov esi, [esp+8] /* move in back to %esi, toss from */ + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +L_test_for_end_of_block: + test al, 32 + jz L_invalid_literal_length_code + mov dword ptr [esp+72], 1 + jmp L_break_loop_with_status + +L_invalid_literal_length_code: + mov dword ptr [esp+72], 2 + jmp L_break_loop_with_status + +L_invalid_distance_code: + mov dword ptr [esp+72], 3 + jmp L_break_loop_with_status + +L_invalid_distance_too_far: + mov esi, [esp+4] + mov dword ptr [esp+72], 4 + jmp L_break_loop_with_status + +L_break_loop: + mov dword ptr [esp+72], 0 + +L_break_loop_with_status: +/* put in, out, bits, and hold back into ar and pop esp */ + mov [esp+8], esi /* save in */ + mov [esp+16], edi /* save out */ + mov [esp+44], ebx /* save bits */ + mov [esp+40], edx /* save hold */ + mov ebp, [esp+4] /* restore esp, ebp */ + mov esp, [esp] + } +#else +#error "x86 architecture not defined" +#endif + + if (ar.status > 1) { + if (ar.status == 2) + strm->msg = "invalid literal/length code"; + else if (ar.status == 3) + strm->msg = "invalid distance code"; + else + strm->msg = "invalid distance too far back"; + state->mode = BAD; + } + else if ( ar.status == 1 ) { + state->mode = TYPE; + } + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + ar.len = ar.bits >> 3; + ar.in -= ar.len; + ar.bits -= ar.len << 3; + ar.hold &= (1U << ar.bits) - 1; + + /* update state and return */ + strm->next_in = ar.in; + strm->next_out = ar.out; + strm->avail_in = (unsigned)(ar.in < ar.last ? + PAD_AVAIL_IN + (ar.last - ar.in) : + PAD_AVAIL_IN - (ar.in - ar.last)); + strm->avail_out = (unsigned)(ar.out < ar.end ? + PAD_AVAIL_OUT + (ar.end - ar.out) : + PAD_AVAIL_OUT - (ar.out - ar.end)); + state->hold = ar.hold; + state->bits = ar.bits; + return; +} + diff --git a/common/dist/zlib/contrib/inflate86/inffast.S b/common/dist/zlib/contrib/inflate86/inffast.S new file mode 100644 index 000000000..2245a2905 --- /dev/null +++ b/common/dist/zlib/contrib/inflate86/inffast.S @@ -0,0 +1,1368 @@ +/* + * inffast.S is a hand tuned assembler version of: + * + * inffast.c -- fast decoding + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Copyright (C) 2003 Chris Anderson + * Please use the copyright conditions above. + * + * This version (Jan-23-2003) of inflate_fast was coded and tested under + * GNU/Linux on a pentium 3, using the gcc-3.2 compiler distribution. On that + * machine, I found that gzip style archives decompressed about 20% faster than + * the gcc-3.2 -O3 -fomit-frame-pointer compiled version. Your results will + * depend on how large of a buffer is used for z_stream.next_in & next_out + * (8K-32K worked best for my 256K cpu cache) and how much overhead there is in + * stream processing I/O and crc32/addler32. In my case, this routine used + * 70% of the cpu time and crc32 used 20%. + * + * I am confident that this version will work in the general case, but I have + * not tested a wide variety of datasets or a wide variety of platforms. + * + * Jan-24-2003 -- Added -DUSE_MMX define for slightly faster inflating. + * It should be a runtime flag instead of compile time flag... + * + * Jan-26-2003 -- Added runtime check for MMX support with cpuid instruction. + * With -DUSE_MMX, only MMX code is compiled. With -DNO_MMX, only non-MMX code + * is compiled. Without either option, runtime detection is enabled. Runtime + * detection should work on all modern cpus and the recomended algorithm (flip + * ID bit on eflags and then use the cpuid instruction) is used in many + * multimedia applications. Tested under win2k with gcc-2.95 and gas-2.12 + * distributed with cygwin3. Compiling with gcc-2.95 -c inffast.S -o + * inffast.obj generates a COFF object which can then be linked with MSVC++ + * compiled code. Tested under FreeBSD 4.7 with gcc-2.95. + * + * Jan-28-2003 -- Tested Athlon XP... MMX mode is slower than no MMX (and + * slower than compiler generated code). Adjusted cpuid check to use the MMX + * code only for Pentiums < P4 until I have more data on the P4. Speed + * improvment is only about 15% on the Athlon when compared with code generated + * with MSVC++. Not sure yet, but I think the P4 will also be slower using the + * MMX mode because many of it's x86 ALU instructions execute in .5 cycles and + * have less latency than MMX ops. Added code to buffer the last 11 bytes of + * the input stream since the MMX code grabs bits in chunks of 32, which + * differs from the inffast.c algorithm. I don't think there would have been + * read overruns where a page boundary was crossed (a segfault), but there + * could have been overruns when next_in ends on unaligned memory (unintialized + * memory read). + * + * Mar-13-2003 -- P4 MMX is slightly slower than P4 NO_MMX. I created a C + * version of the non-MMX code so that it doesn't depend on zstrm and zstate + * structure offsets which are hard coded in this file. This was last tested + * with zlib-1.2.0 which is currently in beta testing, newer versions of this + * and inffas86.c can be found at http://www.eetbeetee.com/zlib/ and + * http://www.charm.net/~christop/zlib/ + */ + + +/* + * if you have underscore linking problems (_inflate_fast undefined), try + * using -DGAS_COFF + */ +#if ! defined( GAS_COFF ) && ! defined( GAS_ELF ) + +#if defined( WIN32 ) || defined( __CYGWIN__ ) +#define GAS_COFF /* windows object format */ +#else +#define GAS_ELF +#endif + +#endif /* ! GAS_COFF && ! GAS_ELF */ + + +#if defined( GAS_COFF ) + +/* coff externals have underscores */ +#define inflate_fast _inflate_fast +#define inflate_fast_use_mmx _inflate_fast_use_mmx + +#endif /* GAS_COFF */ + + +.file "inffast.S" + +.globl inflate_fast + +.text +.align 4,0 +.L_invalid_literal_length_code_msg: +.string "invalid literal/length code" + +.align 4,0 +.L_invalid_distance_code_msg: +.string "invalid distance code" + +.align 4,0 +.L_invalid_distance_too_far_msg: +.string "invalid distance too far back" + +#if ! defined( NO_MMX ) +.align 4,0 +.L_mask: /* mask[N] = ( 1 << N ) - 1 */ +.long 0 +.long 1 +.long 3 +.long 7 +.long 15 +.long 31 +.long 63 +.long 127 +.long 255 +.long 511 +.long 1023 +.long 2047 +.long 4095 +.long 8191 +.long 16383 +.long 32767 +.long 65535 +.long 131071 +.long 262143 +.long 524287 +.long 1048575 +.long 2097151 +.long 4194303 +.long 8388607 +.long 16777215 +.long 33554431 +.long 67108863 +.long 134217727 +.long 268435455 +.long 536870911 +.long 1073741823 +.long 2147483647 +.long 4294967295 +#endif /* NO_MMX */ + +.text + +/* + * struct z_stream offsets, in zlib.h + */ +#define next_in_strm 0 /* strm->next_in */ +#define avail_in_strm 4 /* strm->avail_in */ +#define next_out_strm 12 /* strm->next_out */ +#define avail_out_strm 16 /* strm->avail_out */ +#define msg_strm 24 /* strm->msg */ +#define state_strm 28 /* strm->state */ + +/* + * struct inflate_state offsets, in inflate.h + */ +#define mode_state 0 /* state->mode */ +#define wsize_state 32 /* state->wsize */ +#define write_state 40 /* state->write */ +#define window_state 44 /* state->window */ +#define hold_state 48 /* state->hold */ +#define bits_state 52 /* state->bits */ +#define lencode_state 68 /* state->lencode */ +#define distcode_state 72 /* state->distcode */ +#define lenbits_state 76 /* state->lenbits */ +#define distbits_state 80 /* state->distbits */ + +/* + * inflate_fast's activation record + */ +#define local_var_size 64 /* how much local space for vars */ +#define strm_sp 88 /* first arg: z_stream * (local_var_size + 24) */ +#define start_sp 92 /* second arg: unsigned int (local_var_size + 28) */ + +/* + * offsets for local vars on stack + */ +#define out 60 /* unsigned char* */ +#define window 56 /* unsigned char* */ +#define wsize 52 /* unsigned int */ +#define write 48 /* unsigned int */ +#define in 44 /* unsigned char* */ +#define beg 40 /* unsigned char* */ +#define buf 28 /* char[ 12 ] */ +#define len 24 /* unsigned int */ +#define last 20 /* unsigned char* */ +#define end 16 /* unsigned char* */ +#define dcode 12 /* code* */ +#define lcode 8 /* code* */ +#define dmask 4 /* unsigned int */ +#define lmask 0 /* unsigned int */ + +/* + * typedef enum inflate_mode consts, in inflate.h + */ +#define INFLATE_MODE_TYPE 11 /* state->mode flags enum-ed in inflate.h */ +#define INFLATE_MODE_BAD 26 + + +#if ! defined( USE_MMX ) && ! defined( NO_MMX ) + +#define RUN_TIME_MMX + +#define CHECK_MMX 1 +#define DO_USE_MMX 2 +#define DONT_USE_MMX 3 + +.globl inflate_fast_use_mmx + +.data + +.align 4,0 +inflate_fast_use_mmx: /* integer flag for run time control 1=check,2=mmx,3=no */ +.long CHECK_MMX + +#if defined( GAS_ELF ) +/* elf info */ +.type inflate_fast_use_mmx,@object +.size inflate_fast_use_mmx,4 +#endif + +#endif /* RUN_TIME_MMX */ + +#if defined( GAS_COFF ) +/* coff info: scl 2 = extern, type 32 = function */ +.def inflate_fast; .scl 2; .type 32; .endef +#endif + +.text + +.align 32,0x90 +inflate_fast: + pushl %edi + pushl %esi + pushl %ebp + pushl %ebx + pushf /* save eflags (strm_sp, state_sp assumes this is 32 bits) */ + subl $local_var_size, %esp + cld + +#define strm_r %esi +#define state_r %edi + + movl strm_sp(%esp), strm_r + movl state_strm(strm_r), state_r + + /* in = strm->next_in; + * out = strm->next_out; + * last = in + strm->avail_in - 11; + * beg = out - (start - strm->avail_out); + * end = out + (strm->avail_out - 257); + */ + movl avail_in_strm(strm_r), %edx + movl next_in_strm(strm_r), %eax + + addl %eax, %edx /* avail_in += next_in */ + subl $11, %edx /* avail_in -= 11 */ + + movl %eax, in(%esp) + movl %edx, last(%esp) + + movl start_sp(%esp), %ebp + movl avail_out_strm(strm_r), %ecx + movl next_out_strm(strm_r), %ebx + + subl %ecx, %ebp /* start -= avail_out */ + negl %ebp /* start = -start */ + addl %ebx, %ebp /* start += next_out */ + + subl $257, %ecx /* avail_out -= 257 */ + addl %ebx, %ecx /* avail_out += out */ + + movl %ebx, out(%esp) + movl %ebp, beg(%esp) + movl %ecx, end(%esp) + + /* wsize = state->wsize; + * write = state->write; + * window = state->window; + * hold = state->hold; + * bits = state->bits; + * lcode = state->lencode; + * dcode = state->distcode; + * lmask = ( 1 << state->lenbits ) - 1; + * dmask = ( 1 << state->distbits ) - 1; + */ + + movl lencode_state(state_r), %eax + movl distcode_state(state_r), %ecx + + movl %eax, lcode(%esp) + movl %ecx, dcode(%esp) + + movl $1, %eax + movl lenbits_state(state_r), %ecx + shll %cl, %eax + decl %eax + movl %eax, lmask(%esp) + + movl $1, %eax + movl distbits_state(state_r), %ecx + shll %cl, %eax + decl %eax + movl %eax, dmask(%esp) + + movl wsize_state(state_r), %eax + movl write_state(state_r), %ecx + movl window_state(state_r), %edx + + movl %eax, wsize(%esp) + movl %ecx, write(%esp) + movl %edx, window(%esp) + + movl hold_state(state_r), %ebp + movl bits_state(state_r), %ebx + +#undef strm_r +#undef state_r + +#define in_r %esi +#define from_r %esi +#define out_r %edi + + movl in(%esp), in_r + movl last(%esp), %ecx + cmpl in_r, %ecx + ja .L_align_long /* if in < last */ + + addl $11, %ecx /* ecx = &in[ avail_in ] */ + subl in_r, %ecx /* ecx = avail_in */ + movl $12, %eax + subl %ecx, %eax /* eax = 12 - avail_in */ + leal buf(%esp), %edi + rep movsb /* memcpy( buf, in, avail_in ) */ + movl %eax, %ecx + xorl %eax, %eax + rep stosb /* memset( &buf[ avail_in ], 0, 12 - avail_in ) */ + leal buf(%esp), in_r /* in = buf */ + movl in_r, last(%esp) /* last = in, do just one iteration */ + jmp .L_is_aligned + + /* align in_r on long boundary */ +.L_align_long: + testl $3, in_r + jz .L_is_aligned + xorl %eax, %eax + movb (in_r), %al + incl in_r + movl %ebx, %ecx + addl $8, %ebx + shll %cl, %eax + orl %eax, %ebp + jmp .L_align_long + +.L_is_aligned: + movl out(%esp), out_r + +#if defined( NO_MMX ) + jmp .L_do_loop +#endif + +#if defined( USE_MMX ) + jmp .L_init_mmx +#endif + +/*** Runtime MMX check ***/ + +#if defined( RUN_TIME_MMX ) +.L_check_mmx: + cmpl $DO_USE_MMX, inflate_fast_use_mmx + je .L_init_mmx + ja .L_do_loop /* > 2 */ + + pushl %eax + pushl %ebx + pushl %ecx + pushl %edx + pushf + movl (%esp), %eax /* copy eflags to eax */ + xorl $0x200000, (%esp) /* try toggling ID bit of eflags (bit 21) + * to see if cpu supports cpuid... + * ID bit method not supported by NexGen but + * bios may load a cpuid instruction and + * cpuid may be disabled on Cyrix 5-6x86 */ + popf + pushf + popl %edx /* copy new eflags to edx */ + xorl %eax, %edx /* test if ID bit is flipped */ + jz .L_dont_use_mmx /* not flipped if zero */ + xorl %eax, %eax + cpuid + cmpl $0x756e6547, %ebx /* check for GenuineIntel in ebx,ecx,edx */ + jne .L_dont_use_mmx + cmpl $0x6c65746e, %ecx + jne .L_dont_use_mmx + cmpl $0x49656e69, %edx + jne .L_dont_use_mmx + movl $1, %eax + cpuid /* get cpu features */ + shrl $8, %eax + andl $15, %eax + cmpl $6, %eax /* check for Pentium family, is 0xf for P4 */ + jne .L_dont_use_mmx + testl $0x800000, %edx /* test if MMX feature is set (bit 23) */ + jnz .L_use_mmx + jmp .L_dont_use_mmx +.L_use_mmx: + movl $DO_USE_MMX, inflate_fast_use_mmx + jmp .L_check_mmx_pop +.L_dont_use_mmx: + movl $DONT_USE_MMX, inflate_fast_use_mmx +.L_check_mmx_pop: + popl %edx + popl %ecx + popl %ebx + popl %eax + jmp .L_check_mmx +#endif + + +/*** Non-MMX code ***/ + +#if defined ( NO_MMX ) || defined( RUN_TIME_MMX ) + +#define hold_r %ebp +#define bits_r %bl +#define bitslong_r %ebx + +.align 32,0x90 +.L_while_test: + /* while (in < last && out < end) + */ + cmpl out_r, end(%esp) + jbe .L_break_loop /* if (out >= end) */ + + cmpl in_r, last(%esp) + jbe .L_break_loop + +.L_do_loop: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out + * + * do { + * if (bits < 15) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * this = lcode[hold & lmask] + */ + cmpb $15, bits_r + ja .L_get_length_code /* if (15 < bits) */ + + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + +.L_get_length_code: + movl lmask(%esp), %edx /* edx = lmask */ + movl lcode(%esp), %ecx /* ecx = lcode */ + andl hold_r, %edx /* edx &= hold */ + movl (%ecx,%edx,4), %eax /* eax = lcode[hold & lmask] */ + +.L_dolen: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out + * + * dolen: + * bits -= this.bits; + * hold >>= this.bits + */ + movb %ah, %cl /* cl = this.bits */ + subb %ah, bits_r /* bits -= this.bits */ + shrl %cl, hold_r /* hold >>= this.bits */ + + /* check if op is a literal + * if (op == 0) { + * PUP(out) = this.val; + * } + */ + testb %al, %al + jnz .L_test_for_length_base /* if (op != 0) 45.7% */ + + shrl $16, %eax /* output this.val char */ + stosb + jmp .L_while_test + +.L_test_for_length_base: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out, %edx = len + * + * else if (op & 16) { + * len = this.val + * op &= 15 + * if (op) { + * if (op > bits) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * len += hold & mask[op]; + * bits -= op; + * hold >>= op; + * } + */ +#define len_r %edx + movl %eax, len_r /* len = this */ + shrl $16, len_r /* len = this.val */ + movb %al, %cl + + testb $16, %al + jz .L_test_for_second_level_length /* if ((op & 16) == 0) 8% */ + andb $15, %cl /* op &= 15 */ + jz .L_save_len /* if (!op) */ + cmpb %cl, bits_r + jae .L_add_bits_to_len /* if (op <= bits) */ + + movb %cl, %ch /* stash op in ch, freeing cl */ + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + movb %ch, %cl /* move op back to ecx */ + +.L_add_bits_to_len: + movl $1, %eax + shll %cl, %eax + decl %eax + subb %cl, bits_r + andl hold_r, %eax /* eax &= hold */ + shrl %cl, hold_r + addl %eax, len_r /* len += hold & mask[op] */ + +.L_save_len: + movl len_r, len(%esp) /* save len */ +#undef len_r + +.L_decode_distance: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * + * if (bits < 15) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * this = dcode[hold & dmask]; + * dodist: + * bits -= this.bits; + * hold >>= this.bits; + * op = this.op; + */ + + cmpb $15, bits_r + ja .L_get_distance_code /* if (15 < bits) */ + + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + +.L_get_distance_code: + movl dmask(%esp), %edx /* edx = dmask */ + movl dcode(%esp), %ecx /* ecx = dcode */ + andl hold_r, %edx /* edx &= hold */ + movl (%ecx,%edx,4), %eax /* eax = dcode[hold & dmask] */ + +#define dist_r %edx +.L_dodist: + movl %eax, dist_r /* dist = this */ + shrl $16, dist_r /* dist = this.val */ + movb %ah, %cl + subb %ah, bits_r /* bits -= this.bits */ + shrl %cl, hold_r /* hold >>= this.bits */ + + /* if (op & 16) { + * dist = this.val + * op &= 15 + * if (op > bits) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * dist += hold & mask[op]; + * bits -= op; + * hold >>= op; + */ + movb %al, %cl /* cl = this.op */ + + testb $16, %al /* if ((op & 16) == 0) */ + jz .L_test_for_second_level_dist + andb $15, %cl /* op &= 15 */ + jz .L_check_dist_one + cmpb %cl, bits_r + jae .L_add_bits_to_dist /* if (op <= bits) 97.6% */ + + movb %cl, %ch /* stash op in ch, freeing cl */ + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + movb %ch, %cl /* move op back to ecx */ + +.L_add_bits_to_dist: + movl $1, %eax + shll %cl, %eax + decl %eax /* (1 << op) - 1 */ + subb %cl, bits_r + andl hold_r, %eax /* eax &= hold */ + shrl %cl, hold_r + addl %eax, dist_r /* dist += hold & ((1 << op) - 1) */ + jmp .L_check_window + +.L_check_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes + * + * nbytes = out - beg; + * if (dist <= nbytes) { + * from = out - dist; + * do { + * PUP(out) = PUP(from); + * } while (--len > 0) { + * } + */ + + movl in_r, in(%esp) /* save in so from can use it's reg */ + movl out_r, %eax + subl beg(%esp), %eax /* nbytes = out - beg */ + + cmpl dist_r, %eax + jb .L_clip_window /* if (dist > nbytes) 4.2% */ + + movl len(%esp), %ecx + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + + subl $3, %ecx + movb (from_r), %al + movb %al, (out_r) + movb 1(from_r), %al + movb 2(from_r), %dl + addl $3, from_r + movb %al, 1(out_r) + movb %dl, 2(out_r) + addl $3, out_r + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + jmp .L_while_test + +.align 16,0x90 +.L_check_dist_one: + cmpl $1, dist_r + jne .L_check_window + cmpl out_r, beg(%esp) + je .L_check_window + + decl out_r + movl len(%esp), %ecx + movb (out_r), %al + subl $3, %ecx + + movb %al, 1(out_r) + movb %al, 2(out_r) + movb %al, 3(out_r) + addl $4, out_r + rep stosb + + jmp .L_while_test + +.align 16,0x90 +.L_test_for_second_level_length: + /* else if ((op & 64) == 0) { + * this = lcode[this.val + (hold & mask[op])]; + * } + */ + testb $64, %al + jnz .L_test_for_end_of_block /* if ((op & 64) != 0) */ + + movl $1, %eax + shll %cl, %eax + decl %eax + andl hold_r, %eax /* eax &= hold */ + addl %edx, %eax /* eax += this.val */ + movl lcode(%esp), %edx /* edx = lcode */ + movl (%edx,%eax,4), %eax /* eax = lcode[val + (hold&mask[op])] */ + jmp .L_dolen + +.align 16,0x90 +.L_test_for_second_level_dist: + /* else if ((op & 64) == 0) { + * this = dcode[this.val + (hold & mask[op])]; + * } + */ + testb $64, %al + jnz .L_invalid_distance_code /* if ((op & 64) != 0) */ + + movl $1, %eax + shll %cl, %eax + decl %eax + andl hold_r, %eax /* eax &= hold */ + addl %edx, %eax /* eax += this.val */ + movl dcode(%esp), %edx /* edx = dcode */ + movl (%edx,%eax,4), %eax /* eax = dcode[val + (hold&mask[op])] */ + jmp .L_dodist + +.align 16,0x90 +.L_clip_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes + * + * else { + * if (dist > wsize) { + * invalid distance + * } + * from = window; + * nbytes = dist - nbytes; + * if (write == 0) { + * from += wsize - nbytes; + */ +#define nbytes_r %ecx + movl %eax, nbytes_r + movl wsize(%esp), %eax /* prepare for dist compare */ + negl nbytes_r /* nbytes = -nbytes */ + movl window(%esp), from_r /* from = window */ + + cmpl dist_r, %eax + jb .L_invalid_distance_too_far /* if (dist > wsize) */ + + addl dist_r, nbytes_r /* nbytes = dist - nbytes */ + cmpl $0, write(%esp) + jne .L_wrap_around_window /* if (write != 0) */ + + subl nbytes_r, %eax + addl %eax, from_r /* from += wsize - nbytes */ + + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes, %eax = len + * + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while (--nbytes); + * from = out - dist; + * } + * } + */ +#define len_r %eax + movl len(%esp), len_r + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1 + + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1 + +.L_wrap_around_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes, %eax = write, %eax = len + * + * else if (write < nbytes) { + * from += wsize + write - nbytes; + * nbytes -= write; + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while (--nbytes); + * from = window; + * nbytes = write; + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while(--nbytes); + * from = out - dist; + * } + * } + * } + */ +#define write_r %eax + movl write(%esp), write_r + cmpl write_r, nbytes_r + jbe .L_contiguous_in_window /* if (write >= nbytes) */ + + addl wsize(%esp), from_r + addl write_r, from_r + subl nbytes_r, from_r /* from += wsize + write - nbytes */ + subl write_r, nbytes_r /* nbytes -= write */ +#undef write_r + + movl len(%esp), len_r + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl window(%esp), from_r /* from = window */ + movl write(%esp), nbytes_r /* nbytes = write */ + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1 + +.L_contiguous_in_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes, %eax = write, %eax = len + * + * else { + * from += write - nbytes; + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while (--nbytes); + * from = out - dist; + * } + * } + */ +#define write_r %eax + addl write_r, from_r + subl nbytes_r, from_r /* from += write - nbytes */ +#undef write_r + + movl len(%esp), len_r + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + +.L_do_copy1: + /* regs: %esi = from, %esi = in, %ebp = hold, %bl = bits, %edi = out + * %eax = len + * + * while (len > 0) { + * PUP(out) = PUP(from); + * len--; + * } + * } + * } while (in < last && out < end); + */ +#undef nbytes_r +#define in_r %esi + movl len_r, %ecx + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + jmp .L_while_test + +#undef len_r +#undef dist_r + +#endif /* NO_MMX || RUN_TIME_MMX */ + + +/*** MMX code ***/ + +#if defined( USE_MMX ) || defined( RUN_TIME_MMX ) + +.align 32,0x90 +.L_init_mmx: + emms + +#undef bits_r +#undef bitslong_r +#define bitslong_r %ebp +#define hold_mm %mm0 + movd %ebp, hold_mm + movl %ebx, bitslong_r + +#define used_mm %mm1 +#define dmask2_mm %mm2 +#define lmask2_mm %mm3 +#define lmask_mm %mm4 +#define dmask_mm %mm5 +#define tmp_mm %mm6 + + movd lmask(%esp), lmask_mm + movq lmask_mm, lmask2_mm + movd dmask(%esp), dmask_mm + movq dmask_mm, dmask2_mm + pxor used_mm, used_mm + movl lcode(%esp), %ebx /* ebx = lcode */ + jmp .L_do_loop_mmx + +.align 32,0x90 +.L_while_test_mmx: + /* while (in < last && out < end) + */ + cmpl out_r, end(%esp) + jbe .L_break_loop /* if (out >= end) */ + + cmpl in_r, last(%esp) + jbe .L_break_loop + +.L_do_loop_mmx: + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + + cmpl $32, bitslong_r + ja .L_get_length_code_mmx /* if (32 < bits) */ + + movd bitslong_r, tmp_mm + movd (in_r), %mm7 + addl $4, in_r + psllq tmp_mm, %mm7 + addl $32, bitslong_r + por %mm7, hold_mm /* hold_mm |= *((uint *)in)++ << bits */ + +.L_get_length_code_mmx: + pand hold_mm, lmask_mm + movd lmask_mm, %eax + movq lmask2_mm, lmask_mm + movl (%ebx,%eax,4), %eax /* eax = lcode[hold & lmask] */ + +.L_dolen_mmx: + movzbl %ah, %ecx /* ecx = this.bits */ + movd %ecx, used_mm + subl %ecx, bitslong_r /* bits -= this.bits */ + + testb %al, %al + jnz .L_test_for_length_base_mmx /* if (op != 0) 45.7% */ + + shrl $16, %eax /* output this.val char */ + stosb + jmp .L_while_test_mmx + +.L_test_for_length_base_mmx: +#define len_r %edx + movl %eax, len_r /* len = this */ + shrl $16, len_r /* len = this.val */ + + testb $16, %al + jz .L_test_for_second_level_length_mmx /* if ((op & 16) == 0) 8% */ + andl $15, %eax /* op &= 15 */ + jz .L_decode_distance_mmx /* if (!op) */ + + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd %eax, used_mm + movd hold_mm, %ecx + subl %eax, bitslong_r + andl .L_mask(,%eax,4), %ecx + addl %ecx, len_r /* len += hold & mask[op] */ + +.L_decode_distance_mmx: + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + + cmpl $32, bitslong_r + ja .L_get_dist_code_mmx /* if (32 < bits) */ + + movd bitslong_r, tmp_mm + movd (in_r), %mm7 + addl $4, in_r + psllq tmp_mm, %mm7 + addl $32, bitslong_r + por %mm7, hold_mm /* hold_mm |= *((uint *)in)++ << bits */ + +.L_get_dist_code_mmx: + movl dcode(%esp), %ebx /* ebx = dcode */ + pand hold_mm, dmask_mm + movd dmask_mm, %eax + movq dmask2_mm, dmask_mm + movl (%ebx,%eax,4), %eax /* eax = dcode[hold & lmask] */ + +.L_dodist_mmx: +#define dist_r %ebx + movzbl %ah, %ecx /* ecx = this.bits */ + movl %eax, dist_r + shrl $16, dist_r /* dist = this.val */ + subl %ecx, bitslong_r /* bits -= this.bits */ + movd %ecx, used_mm + + testb $16, %al /* if ((op & 16) == 0) */ + jz .L_test_for_second_level_dist_mmx + andl $15, %eax /* op &= 15 */ + jz .L_check_dist_one_mmx + +.L_add_bits_to_dist_mmx: + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd %eax, used_mm /* save bit length of current op */ + movd hold_mm, %ecx /* get the next bits on input stream */ + subl %eax, bitslong_r /* bits -= op bits */ + andl .L_mask(,%eax,4), %ecx /* ecx = hold & mask[op] */ + addl %ecx, dist_r /* dist += hold & mask[op] */ + +.L_check_window_mmx: + movl in_r, in(%esp) /* save in so from can use it's reg */ + movl out_r, %eax + subl beg(%esp), %eax /* nbytes = out - beg */ + + cmpl dist_r, %eax + jb .L_clip_window_mmx /* if (dist > nbytes) 4.2% */ + + movl len_r, %ecx + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + + subl $3, %ecx + movb (from_r), %al + movb %al, (out_r) + movb 1(from_r), %al + movb 2(from_r), %dl + addl $3, from_r + movb %al, 1(out_r) + movb %dl, 2(out_r) + addl $3, out_r + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */ + jmp .L_while_test_mmx + +.align 16,0x90 +.L_check_dist_one_mmx: + cmpl $1, dist_r + jne .L_check_window_mmx + cmpl out_r, beg(%esp) + je .L_check_window_mmx + + decl out_r + movl len_r, %ecx + movb (out_r), %al + subl $3, %ecx + + movb %al, 1(out_r) + movb %al, 2(out_r) + movb %al, 3(out_r) + addl $4, out_r + rep stosb + + movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */ + jmp .L_while_test_mmx + +.align 16,0x90 +.L_test_for_second_level_length_mmx: + testb $64, %al + jnz .L_test_for_end_of_block /* if ((op & 64) != 0) */ + + andl $15, %eax + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd hold_mm, %ecx + andl .L_mask(,%eax,4), %ecx + addl len_r, %ecx + movl (%ebx,%ecx,4), %eax /* eax = lcode[hold & lmask] */ + jmp .L_dolen_mmx + +.align 16,0x90 +.L_test_for_second_level_dist_mmx: + testb $64, %al + jnz .L_invalid_distance_code /* if ((op & 64) != 0) */ + + andl $15, %eax + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd hold_mm, %ecx + andl .L_mask(,%eax,4), %ecx + movl dcode(%esp), %eax /* ecx = dcode */ + addl dist_r, %ecx + movl (%eax,%ecx,4), %eax /* eax = lcode[hold & lmask] */ + jmp .L_dodist_mmx + +.align 16,0x90 +.L_clip_window_mmx: +#define nbytes_r %ecx + movl %eax, nbytes_r + movl wsize(%esp), %eax /* prepare for dist compare */ + negl nbytes_r /* nbytes = -nbytes */ + movl window(%esp), from_r /* from = window */ + + cmpl dist_r, %eax + jb .L_invalid_distance_too_far /* if (dist > wsize) */ + + addl dist_r, nbytes_r /* nbytes = dist - nbytes */ + cmpl $0, write(%esp) + jne .L_wrap_around_window_mmx /* if (write != 0) */ + + subl nbytes_r, %eax + addl %eax, from_r /* from += wsize - nbytes */ + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1_mmx + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1_mmx + +.L_wrap_around_window_mmx: +#define write_r %eax + movl write(%esp), write_r + cmpl write_r, nbytes_r + jbe .L_contiguous_in_window_mmx /* if (write >= nbytes) */ + + addl wsize(%esp), from_r + addl write_r, from_r + subl nbytes_r, from_r /* from += wsize + write - nbytes */ + subl write_r, nbytes_r /* nbytes -= write */ +#undef write_r + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl window(%esp), from_r /* from = window */ + movl write(%esp), nbytes_r /* nbytes = write */ + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1_mmx + +.L_contiguous_in_window_mmx: +#define write_r %eax + addl write_r, from_r + subl nbytes_r, from_r /* from += write - nbytes */ +#undef write_r + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + +.L_do_copy1_mmx: +#undef nbytes_r +#define in_r %esi + movl len_r, %ecx + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */ + jmp .L_while_test_mmx + +#undef hold_r +#undef bitslong_r + +#endif /* USE_MMX || RUN_TIME_MMX */ + + +/*** USE_MMX, NO_MMX, and RUNTIME_MMX from here on ***/ + +.L_invalid_distance_code: + /* else { + * strm->msg = "invalid distance code"; + * state->mode = BAD; + * } + */ + movl $.L_invalid_distance_code_msg, %ecx + movl $INFLATE_MODE_BAD, %edx + jmp .L_update_stream_state + +.L_test_for_end_of_block: + /* else if (op & 32) { + * state->mode = TYPE; + * break; + * } + */ + testb $32, %al + jz .L_invalid_literal_length_code /* if ((op & 32) == 0) */ + + movl $0, %ecx + movl $INFLATE_MODE_TYPE, %edx + jmp .L_update_stream_state + +.L_invalid_literal_length_code: + /* else { + * strm->msg = "invalid literal/length code"; + * state->mode = BAD; + * } + */ + movl $.L_invalid_literal_length_code_msg, %ecx + movl $INFLATE_MODE_BAD, %edx + jmp .L_update_stream_state + +.L_invalid_distance_too_far: + /* strm->msg = "invalid distance too far back"; + * state->mode = BAD; + */ + movl in(%esp), in_r /* from_r has in's reg, put in back */ + movl $.L_invalid_distance_too_far_msg, %ecx + movl $INFLATE_MODE_BAD, %edx + jmp .L_update_stream_state + +.L_update_stream_state: + /* set strm->msg = %ecx, strm->state->mode = %edx */ + movl strm_sp(%esp), %eax + testl %ecx, %ecx /* if (msg != NULL) */ + jz .L_skip_msg + movl %ecx, msg_strm(%eax) /* strm->msg = msg */ +.L_skip_msg: + movl state_strm(%eax), %eax /* state = strm->state */ + movl %edx, mode_state(%eax) /* state->mode = edx (BAD | TYPE) */ + jmp .L_break_loop + +.align 32,0x90 +.L_break_loop: + +/* + * Regs: + * + * bits = %ebp when mmx, and in %ebx when non-mmx + * hold = %hold_mm when mmx, and in %ebp when non-mmx + * in = %esi + * out = %edi + */ + +#if defined( USE_MMX ) || defined( RUN_TIME_MMX ) + +#if defined( RUN_TIME_MMX ) + + cmpl $DO_USE_MMX, inflate_fast_use_mmx + jne .L_update_next_in + +#endif /* RUN_TIME_MMX */ + + movl %ebp, %ebx + +.L_update_next_in: + +#endif + +#define strm_r %eax +#define state_r %edx + + /* len = bits >> 3; + * in -= len; + * bits -= len << 3; + * hold &= (1U << bits) - 1; + * state->hold = hold; + * state->bits = bits; + * strm->next_in = in; + * strm->next_out = out; + */ + movl strm_sp(%esp), strm_r + movl %ebx, %ecx + movl state_strm(strm_r), state_r + shrl $3, %ecx + subl %ecx, in_r + shll $3, %ecx + subl %ecx, %ebx + movl out_r, next_out_strm(strm_r) + movl %ebx, bits_state(state_r) + movl %ebx, %ecx + + leal buf(%esp), %ebx + cmpl %ebx, last(%esp) + jne .L_buf_not_used /* if buf != last */ + + subl %ebx, in_r /* in -= buf */ + movl next_in_strm(strm_r), %ebx + movl %ebx, last(%esp) /* last = strm->next_in */ + addl %ebx, in_r /* in += strm->next_in */ + movl avail_in_strm(strm_r), %ebx + subl $11, %ebx + addl %ebx, last(%esp) /* last = &strm->next_in[ avail_in - 11 ] */ + +.L_buf_not_used: + movl in_r, next_in_strm(strm_r) + + movl $1, %ebx + shll %cl, %ebx + decl %ebx + +#if defined( USE_MMX ) || defined( RUN_TIME_MMX ) + +#if defined( RUN_TIME_MMX ) + + cmpl $DO_USE_MMX, inflate_fast_use_mmx + jne .L_update_hold + +#endif /* RUN_TIME_MMX */ + + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd hold_mm, %ebp + + emms + +.L_update_hold: + +#endif /* USE_MMX || RUN_TIME_MMX */ + + andl %ebx, %ebp + movl %ebp, hold_state(state_r) + +#define last_r %ebx + + /* strm->avail_in = in < last ? 11 + (last - in) : 11 - (in - last) */ + movl last(%esp), last_r + cmpl in_r, last_r + jbe .L_last_is_smaller /* if (in >= last) */ + + subl in_r, last_r /* last -= in */ + addl $11, last_r /* last += 11 */ + movl last_r, avail_in_strm(strm_r) + jmp .L_fixup_out +.L_last_is_smaller: + subl last_r, in_r /* in -= last */ + negl in_r /* in = -in */ + addl $11, in_r /* in += 11 */ + movl in_r, avail_in_strm(strm_r) + +#undef last_r +#define end_r %ebx + +.L_fixup_out: + /* strm->avail_out = out < end ? 257 + (end - out) : 257 - (out - end)*/ + movl end(%esp), end_r + cmpl out_r, end_r + jbe .L_end_is_smaller /* if (out >= end) */ + + subl out_r, end_r /* end -= out */ + addl $257, end_r /* end += 257 */ + movl end_r, avail_out_strm(strm_r) + jmp .L_done +.L_end_is_smaller: + subl end_r, out_r /* out -= end */ + negl out_r /* out = -out */ + addl $257, out_r /* out += 257 */ + movl out_r, avail_out_strm(strm_r) + +#undef end_r +#undef strm_r +#undef state_r + +.L_done: + addl $local_var_size, %esp + popf + popl %ebx + popl %ebp + popl %esi + popl %edi + ret + +#if defined( GAS_ELF ) +/* elf info */ +.type inflate_fast,@function +.size inflate_fast,.-inflate_fast +#endif diff --git a/common/dist/zlib/contrib/iostream/test.cpp b/common/dist/zlib/contrib/iostream/test.cpp new file mode 100644 index 000000000..7d265b3b5 --- /dev/null +++ b/common/dist/zlib/contrib/iostream/test.cpp @@ -0,0 +1,24 @@ + +#include "zfstream.h" + +int main() { + + // Construct a stream object with this filebuffer. Anything sent + // to this stream will go to standard out. + gzofstream os( 1, ios::out ); + + // This text is getting compressed and sent to stdout. + // To prove this, run 'test | zcat'. + os << "Hello, Mommy" << endl; + + os << setcompressionlevel( Z_NO_COMPRESSION ); + os << "hello, hello, hi, ho!" << endl; + + setcompressionlevel( os, Z_DEFAULT_COMPRESSION ) + << "I'm compressing again" << endl; + + os.close(); + + return 0; + +} diff --git a/common/dist/zlib/contrib/iostream/zfstream.cpp b/common/dist/zlib/contrib/iostream/zfstream.cpp new file mode 100644 index 000000000..d0cd85faa --- /dev/null +++ b/common/dist/zlib/contrib/iostream/zfstream.cpp @@ -0,0 +1,329 @@ + +#include "zfstream.h" + +gzfilebuf::gzfilebuf() : + file(NULL), + mode(0), + own_file_descriptor(0) +{ } + +gzfilebuf::~gzfilebuf() { + + sync(); + if ( own_file_descriptor ) + close(); + +} + +gzfilebuf *gzfilebuf::open( const char *name, + int io_mode ) { + + if ( is_open() ) + return NULL; + + char char_mode[10]; + char *p = char_mode; + + if ( io_mode & ios::in ) { + mode = ios::in; + *p++ = 'r'; + } else if ( io_mode & ios::app ) { + mode = ios::app; + *p++ = 'a'; + } else { + mode = ios::out; + *p++ = 'w'; + } + + if ( io_mode & ios::binary ) { + mode |= ios::binary; + *p++ = 'b'; + } + + // Hard code the compression level + if ( io_mode & (ios::out|ios::app )) { + *p++ = '9'; + } + + // Put the end-of-string indicator + *p = '\0'; + + if ( (file = gzopen(name, char_mode)) == NULL ) + return NULL; + + own_file_descriptor = 1; + + return this; + +} + +gzfilebuf *gzfilebuf::attach( int file_descriptor, + int io_mode ) { + + if ( is_open() ) + return NULL; + + char char_mode[10]; + char *p = char_mode; + + if ( io_mode & ios::in ) { + mode = ios::in; + *p++ = 'r'; + } else if ( io_mode & ios::app ) { + mode = ios::app; + *p++ = 'a'; + } else { + mode = ios::out; + *p++ = 'w'; + } + + if ( io_mode & ios::binary ) { + mode |= ios::binary; + *p++ = 'b'; + } + + // Hard code the compression level + if ( io_mode & (ios::out|ios::app )) { + *p++ = '9'; + } + + // Put the end-of-string indicator + *p = '\0'; + + if ( (file = gzdopen(file_descriptor, char_mode)) == NULL ) + return NULL; + + own_file_descriptor = 0; + + return this; + +} + +gzfilebuf *gzfilebuf::close() { + + if ( is_open() ) { + + sync(); + gzclose( file ); + file = NULL; + + } + + return this; + +} + +int gzfilebuf::setcompressionlevel( int comp_level ) { + + return gzsetparams(file, comp_level, -2); + +} + +int gzfilebuf::setcompressionstrategy( int comp_strategy ) { + + return gzsetparams(file, -2, comp_strategy); + +} + + +streampos gzfilebuf::seekoff( streamoff off, ios::seek_dir dir, int which ) { + + return streampos(EOF); + +} + +int gzfilebuf::underflow() { + + // If the file hasn't been opened for reading, error. + if ( !is_open() || !(mode & ios::in) ) + return EOF; + + // if a buffer doesn't exists, allocate one. + if ( !base() ) { + + if ( (allocate()) == EOF ) + return EOF; + setp(0,0); + + } else { + + if ( in_avail() ) + return (unsigned char) *gptr(); + + if ( out_waiting() ) { + if ( flushbuf() == EOF ) + return EOF; + } + + } + + // Attempt to fill the buffer. + + int result = fillbuf(); + if ( result == EOF ) { + // disable get area + setg(0,0,0); + return EOF; + } + + return (unsigned char) *gptr(); + +} + +int gzfilebuf::overflow( int c ) { + + if ( !is_open() || !(mode & ios::out) ) + return EOF; + + if ( !base() ) { + if ( allocate() == EOF ) + return EOF; + setg(0,0,0); + } else { + if (in_avail()) { + return EOF; + } + if (out_waiting()) { + if (flushbuf() == EOF) + return EOF; + } + } + + int bl = blen(); + setp( base(), base() + bl); + + if ( c != EOF ) { + + *pptr() = c; + pbump(1); + + } + + return 0; + +} + +int gzfilebuf::sync() { + + if ( !is_open() ) + return EOF; + + if ( out_waiting() ) + return flushbuf(); + + return 0; + +} + +int gzfilebuf::flushbuf() { + + int n; + char *q; + + q = pbase(); + n = pptr() - q; + + if ( gzwrite( file, q, n) < n ) + return EOF; + + setp(0,0); + + return 0; + +} + +int gzfilebuf::fillbuf() { + + int required; + char *p; + + p = base(); + + required = blen(); + + int t = gzread( file, p, required ); + + if ( t <= 0) return EOF; + + setg( base(), base(), base()+t); + + return t; + +} + +gzfilestream_common::gzfilestream_common() : + ios( gzfilestream_common::rdbuf() ) +{ } + +gzfilestream_common::~gzfilestream_common() +{ } + +void gzfilestream_common::attach( int fd, int io_mode ) { + + if ( !buffer.attach( fd, io_mode) ) + clear( ios::failbit | ios::badbit ); + else + clear(); + +} + +void gzfilestream_common::open( const char *name, int io_mode ) { + + if ( !buffer.open( name, io_mode ) ) + clear( ios::failbit | ios::badbit ); + else + clear(); + +} + +void gzfilestream_common::close() { + + if ( !buffer.close() ) + clear( ios::failbit | ios::badbit ); + +} + +gzfilebuf *gzfilestream_common::rdbuf() +{ + return &buffer; +} + +gzifstream::gzifstream() : + ios( gzfilestream_common::rdbuf() ) +{ + clear( ios::badbit ); +} + +gzifstream::gzifstream( const char *name, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::open( name, io_mode ); +} + +gzifstream::gzifstream( int fd, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::attach( fd, io_mode ); +} + +gzifstream::~gzifstream() { } + +gzofstream::gzofstream() : + ios( gzfilestream_common::rdbuf() ) +{ + clear( ios::badbit ); +} + +gzofstream::gzofstream( const char *name, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::open( name, io_mode ); +} + +gzofstream::gzofstream( int fd, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::attach( fd, io_mode ); +} + +gzofstream::~gzofstream() { } diff --git a/common/dist/zlib/contrib/iostream/zfstream.h b/common/dist/zlib/contrib/iostream/zfstream.h new file mode 100644 index 000000000..df940e1ae --- /dev/null +++ b/common/dist/zlib/contrib/iostream/zfstream.h @@ -0,0 +1,130 @@ +/* $NetBSD: zfstream.h,v 1.1.1.1 2006/01/14 20:10:53 christos Exp $ */ + + +#ifndef zfstream_h +#define zfstream_h + +#include +#include "zlib.h" + +class gzfilebuf : public streambuf { + +public: + + gzfilebuf( ); + virtual ~gzfilebuf(); + + gzfilebuf *open( const char *name, int io_mode ); + gzfilebuf *attach( int file_descriptor, int io_mode ); + gzfilebuf *close(); + + int setcompressionlevel( int comp_level ); + int setcompressionstrategy( int comp_strategy ); + + inline int is_open() const { return (file !=NULL); } + + virtual streampos seekoff( streamoff, ios::seek_dir, int ); + + virtual int sync(); + +protected: + + virtual int underflow(); + virtual int overflow( int = EOF ); + +private: + + gzFile file; + short mode; + short own_file_descriptor; + + int flushbuf(); + int fillbuf(); + +}; + +class gzfilestream_common : virtual public ios { + + friend class gzifstream; + friend class gzofstream; + friend gzofstream &setcompressionlevel( gzofstream &, int ); + friend gzofstream &setcompressionstrategy( gzofstream &, int ); + +public: + virtual ~gzfilestream_common(); + + void attach( int fd, int io_mode ); + void open( const char *name, int io_mode ); + void close(); + +protected: + gzfilestream_common(); + +private: + gzfilebuf *rdbuf(); + + gzfilebuf buffer; + +}; + +class gzifstream : public gzfilestream_common, public istream { + +public: + + gzifstream(); + gzifstream( const char *name, int io_mode = ios::in ); + gzifstream( int fd, int io_mode = ios::in ); + + virtual ~gzifstream(); + +}; + +class gzofstream : public gzfilestream_common, public ostream { + +public: + + gzofstream(); + gzofstream( const char *name, int io_mode = ios::out ); + gzofstream( int fd, int io_mode = ios::out ); + + virtual ~gzofstream(); + +}; + +template class gzomanip { + friend gzofstream &operator<<(gzofstream &, const gzomanip &); +public: + gzomanip(gzofstream &(*f)(gzofstream &, T), T v) : func(f), val(v) { } +private: + gzofstream &(*func)(gzofstream &, T); + T val; +}; + +template gzofstream &operator<<(gzofstream &s, const gzomanip &m) +{ + return (*m.func)(s, m.val); +} + +inline gzofstream &setcompressionlevel( gzofstream &s, int l ) +{ + (s.rdbuf())->setcompressionlevel(l); + return s; +} + +inline gzofstream &setcompressionstrategy( gzofstream &s, int l ) +{ + (s.rdbuf())->setcompressionstrategy(l); + return s; +} + +inline gzomanip setcompressionlevel(int l) +{ + return gzomanip(&setcompressionlevel,l); +} + +inline gzomanip setcompressionstrategy(int l) +{ + return gzomanip(&setcompressionstrategy,l); +} + +#endif diff --git a/common/dist/zlib/contrib/iostream2/zstream.h b/common/dist/zlib/contrib/iostream2/zstream.h new file mode 100644 index 000000000..ba48b47ad --- /dev/null +++ b/common/dist/zlib/contrib/iostream2/zstream.h @@ -0,0 +1,309 @@ +/* $NetBSD: zstream.h,v 1.1.1.1 2006/01/14 20:10:54 christos Exp $ */ + +/* + * + * Copyright (c) 1997 + * Christian Michelsen Research AS + * Advanced Computing + * Fantoftvegen 38, 5036 BERGEN, Norway + * http://www.cmr.no + * + * Permission to use, copy, modify, distribute and sell this software + * and its documentation for any purpose is hereby granted without fee, + * provided that the above copyright notice appear in all copies and + * that both that copyright notice and this permission notice appear + * in supporting documentation. Christian Michelsen Research AS makes no + * representations about the suitability of this software for any + * purpose. It is provided "as is" without express or implied warranty. + * + */ + +#ifndef ZSTREAM__H +#define ZSTREAM__H + +/* + * zstream.h - C++ interface to the 'zlib' general purpose compression library + * Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge + */ + +#include +#include +#include +#include "zlib.h" + +#if defined(_WIN32) +# include +# include +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +class zstringlen { +public: + zstringlen(class izstream&); + zstringlen(class ozstream&, const char*); + size_t value() const { return val.word; } +private: + struct Val { unsigned char byte; size_t word; } val; +}; + +// ----------------------------- izstream ----------------------------- + +class izstream +{ + public: + izstream() : m_fp(0) {} + izstream(FILE* fp) : m_fp(0) { open(fp); } + izstream(const char* name) : m_fp(0) { open(name); } + ~izstream() { close(); } + + /* Opens a gzip (.gz) file for reading. + * open() can be used to read a file which is not in gzip format; + * in this case read() will directly read from the file without + * decompression. errno can be checked to distinguish two error + * cases (if errno is zero, the zlib error is Z_MEM_ERROR). + */ + void open(const char* name) { + if (m_fp) close(); + m_fp = ::gzopen(name, "rb"); + } + + void open(FILE* fp) { + SET_BINARY_MODE(fp); + if (m_fp) close(); + m_fp = ::gzdopen(fileno(fp), "rb"); + } + + /* Flushes all pending input if necessary, closes the compressed file + * and deallocates all the (de)compression state. The return value is + * the zlib error number (see function error() below). + */ + int close() { + int r = ::gzclose(m_fp); + m_fp = 0; return r; + } + + /* Binary read the given number of bytes from the compressed file. + */ + int read(void* buf, size_t len) { + return ::gzread(m_fp, buf, len); + } + + /* Returns the error message for the last error which occurred on the + * given compressed file. errnum is set to zlib error number. If an + * error occurred in the file system and not in the compression library, + * errnum is set to Z_ERRNO and the application may consult errno + * to get the exact error code. + */ + const char* error(int* errnum) { + return ::gzerror(m_fp, errnum); + } + + gzFile fp() { return m_fp; } + + private: + gzFile m_fp; +}; + +/* + * Binary read the given (array of) object(s) from the compressed file. + * If the input file was not in gzip format, read() copies the objects number + * of bytes into the buffer. + * returns the number of uncompressed bytes actually read + * (0 for end of file, -1 for error). + */ +template +inline int read(izstream& zs, T* x, Items items) { + return ::gzread(zs.fp(), x, items*sizeof(T)); +} + +/* + * Binary input with the '>' operator. + */ +template +inline izstream& operator>(izstream& zs, T& x) { + ::gzread(zs.fp(), &x, sizeof(T)); + return zs; +} + + +inline zstringlen::zstringlen(izstream& zs) { + zs > val.byte; + if (val.byte == 255) zs > val.word; + else val.word = val.byte; +} + +/* + * Read length of string + the string with the '>' operator. + */ +inline izstream& operator>(izstream& zs, char* x) { + zstringlen len(zs); + ::gzread(zs.fp(), x, len.value()); + x[len.value()] = '\0'; + return zs; +} + +inline char* read_string(izstream& zs) { + zstringlen len(zs); + char* x = new char[len.value()+1]; + ::gzread(zs.fp(), x, len.value()); + x[len.value()] = '\0'; + return x; +} + +// ----------------------------- ozstream ----------------------------- + +class ozstream +{ + public: + ozstream() : m_fp(0), m_os(0) { + } + ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION) + : m_fp(0), m_os(0) { + open(fp, level); + } + ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION) + : m_fp(0), m_os(0) { + open(name, level); + } + ~ozstream() { + close(); + } + + /* Opens a gzip (.gz) file for writing. + * The compression level parameter should be in 0..9 + * errno can be checked to distinguish two error cases + * (if errno is zero, the zlib error is Z_MEM_ERROR). + */ + void open(const char* name, int level = Z_DEFAULT_COMPRESSION) { + char mode[4] = "wb\0"; + if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level; + if (m_fp) close(); + m_fp = ::gzopen(name, mode); + } + + /* open from a FILE pointer. + */ + void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) { + SET_BINARY_MODE(fp); + char mode[4] = "wb\0"; + if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level; + if (m_fp) close(); + m_fp = ::gzdopen(fileno(fp), mode); + } + + /* Flushes all pending output if necessary, closes the compressed file + * and deallocates all the (de)compression state. The return value is + * the zlib error number (see function error() below). + */ + int close() { + if (m_os) { + ::gzwrite(m_fp, m_os->str(), m_os->pcount()); + delete[] m_os->str(); delete m_os; m_os = 0; + } + int r = ::gzclose(m_fp); m_fp = 0; return r; + } + + /* Binary write the given number of bytes into the compressed file. + */ + int write(const void* buf, size_t len) { + return ::gzwrite(m_fp, (voidp) buf, len); + } + + /* Flushes all pending output into the compressed file. The parameter + * _flush is as in the deflate() function. The return value is the zlib + * error number (see function gzerror below). flush() returns Z_OK if + * the flush_ parameter is Z_FINISH and all output could be flushed. + * flush() should be called only when strictly necessary because it can + * degrade compression. + */ + int flush(int _flush) { + os_flush(); + return ::gzflush(m_fp, _flush); + } + + /* Returns the error message for the last error which occurred on the + * given compressed file. errnum is set to zlib error number. If an + * error occurred in the file system and not in the compression library, + * errnum is set to Z_ERRNO and the application may consult errno + * to get the exact error code. + */ + const char* error(int* errnum) { + return ::gzerror(m_fp, errnum); + } + + gzFile fp() { return m_fp; } + + ostream& os() { + if (m_os == 0) m_os = new ostrstream; + return *m_os; + } + + void os_flush() { + if (m_os && m_os->pcount()>0) { + ostrstream* oss = new ostrstream; + oss->fill(m_os->fill()); + oss->flags(m_os->flags()); + oss->precision(m_os->precision()); + oss->width(m_os->width()); + ::gzwrite(m_fp, m_os->str(), m_os->pcount()); + delete[] m_os->str(); delete m_os; m_os = oss; + } + } + + private: + gzFile m_fp; + ostrstream* m_os; +}; + +/* + * Binary write the given (array of) object(s) into the compressed file. + * returns the number of uncompressed bytes actually written + * (0 in case of error). + */ +template +inline int write(ozstream& zs, const T* x, Items items) { + return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T)); +} + +/* + * Binary output with the '<' operator. + */ +template +inline ozstream& operator<(ozstream& zs, const T& x) { + ::gzwrite(zs.fp(), (voidp) &x, sizeof(T)); + return zs; +} + +inline zstringlen::zstringlen(ozstream& zs, const char* x) { + val.byte = 255; val.word = ::strlen(x); + if (val.word < 255) zs < (val.byte = val.word); + else zs < val; +} + +/* + * Write length of string + the string with the '<' operator. + */ +inline ozstream& operator<(ozstream& zs, const char* x) { + zstringlen len(zs, x); + ::gzwrite(zs.fp(), (voidp) x, len.value()); + return zs; +} + +#ifdef _MSC_VER +inline ozstream& operator<(ozstream& zs, char* const& x) { + return zs < (const char*) x; +} +#endif + +/* + * Ascii write with the << operator; + */ +template +inline ostream& operator<<(ozstream& zs, const T& x) { + zs.os_flush(); + return zs.os() << x; +} + +#endif diff --git a/common/dist/zlib/contrib/iostream2/zstream_test.cpp b/common/dist/zlib/contrib/iostream2/zstream_test.cpp new file mode 100644 index 000000000..6273f62d6 --- /dev/null +++ b/common/dist/zlib/contrib/iostream2/zstream_test.cpp @@ -0,0 +1,25 @@ +#include "zstream.h" +#include +#include +#include + +void main() { + char h[256] = "Hello"; + char* g = "Goodbye"; + ozstream out("temp.gz"); + out < "This works well" < h < g; + out.close(); + + izstream in("temp.gz"); // read it back + char *x = read_string(in), *y = new char[256], z[256]; + in > y > z; + in.close(); + cout << x << endl << y << endl << z << endl; + + out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results + out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl; + out << z << endl << y << endl << x << endl; + out << 1.1234567890123456789 << endl; + + delete[] x; delete[] y; +} diff --git a/common/dist/zlib/contrib/iostream3/README b/common/dist/zlib/contrib/iostream3/README new file mode 100644 index 000000000..f7b319ab9 --- /dev/null +++ b/common/dist/zlib/contrib/iostream3/README @@ -0,0 +1,35 @@ +These classes provide a C++ stream interface to the zlib library. It allows you +to do things like: + + gzofstream outf("blah.gz"); + outf << "These go into the gzip file " << 123 << endl; + +It does this by deriving a specialized stream buffer for gzipped files, which is +the way Stroustrup would have done it. :-> + +The gzifstream and gzofstream classes were originally written by Kevin Ruland +and made available in the zlib contrib/iostream directory. The older version still +compiles under gcc 2.xx, but not under gcc 3.xx, which sparked the development of +this version. + +The new classes are as standard-compliant as possible, closely following the +approach of the standard library's fstream classes. It compiles under gcc versions +3.2 and 3.3, but not under gcc 2.xx. This is mainly due to changes in the standard +library naming scheme. The new version of gzifstream/gzofstream/gzfilebuf differs +from the previous one in the following respects: +- added showmanyc +- added setbuf, with support for unbuffered output via setbuf(0,0) +- a few bug fixes of stream behavior +- gzipped output file opened with default compression level instead of maximum level +- setcompressionlevel()/strategy() members replaced by single setcompression() + +The code is provided "as is", with the permission to use, copy, modify, distribute +and sell it for any purpose without fee. + +Ludwig Schwardt + + +DSP Lab +Electrical & Electronic Engineering Department +University of Stellenbosch +South Africa diff --git a/common/dist/zlib/contrib/iostream3/TODO b/common/dist/zlib/contrib/iostream3/TODO new file mode 100644 index 000000000..7032f97be --- /dev/null +++ b/common/dist/zlib/contrib/iostream3/TODO @@ -0,0 +1,17 @@ +Possible upgrades to gzfilebuf: + +- The ability to do putback (e.g. putbackfail) + +- The ability to seek (zlib supports this, but could be slow/tricky) + +- Simultaneous read/write access (does it make sense?) + +- Support for ios_base::ate open mode + +- Locale support? + +- Check public interface to see which calls give problems + (due to dependence on library internals) + +- Override operator<<(ostream&, gzfilebuf*) to allow direct copying + of stream buffer to stream ( i.e. os << is.rdbuf(); ) diff --git a/common/dist/zlib/contrib/iostream3/test.cc b/common/dist/zlib/contrib/iostream3/test.cc new file mode 100644 index 000000000..94235334f --- /dev/null +++ b/common/dist/zlib/contrib/iostream3/test.cc @@ -0,0 +1,50 @@ +/* + * Test program for gzifstream and gzofstream + * + * by Ludwig Schwardt + * original version by Kevin Ruland + */ + +#include "zfstream.h" +#include // for cout + +int main() { + + gzofstream outf; + gzifstream inf; + char buf[80]; + + outf.open("test1.txt.gz"); + outf << "The quick brown fox sidestepped the lazy canine\n" + << 1.3 << "\nPlan " << 9 << std::endl; + outf.close(); + std::cout << "Wrote the following message to 'test1.txt.gz' (check with zcat or zless):\n" + << "The quick brown fox sidestepped the lazy canine\n" + << 1.3 << "\nPlan " << 9 << std::endl; + + std::cout << "\nReading 'test1.txt.gz' (buffered) produces:\n"; + inf.open("test1.txt.gz"); + while (inf.getline(buf,80,'\n')) { + std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n"; + } + inf.close(); + + outf.rdbuf()->pubsetbuf(0,0); + outf.open("test2.txt.gz"); + outf << setcompression(Z_NO_COMPRESSION) + << "The quick brown fox sidestepped the lazy canine\n" + << 1.3 << "\nPlan " << 9 << std::endl; + outf.close(); + std::cout << "\nWrote the same message to 'test2.txt.gz' in uncompressed form"; + + std::cout << "\nReading 'test2.txt.gz' (unbuffered) produces:\n"; + inf.rdbuf()->pubsetbuf(0,0); + inf.open("test2.txt.gz"); + while (inf.getline(buf,80,'\n')) { + std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n"; + } + inf.close(); + + return 0; + +} diff --git a/common/dist/zlib/contrib/iostream3/zfstream.cc b/common/dist/zlib/contrib/iostream3/zfstream.cc new file mode 100644 index 000000000..94eb93344 --- /dev/null +++ b/common/dist/zlib/contrib/iostream3/zfstream.cc @@ -0,0 +1,479 @@ +/* + * A C++ I/O streams interface to the zlib gz* functions + * + * by Ludwig Schwardt + * original version by Kevin Ruland + * + * This version is standard-compliant and compatible with gcc 3.x. + */ + +#include "zfstream.h" +#include // for strcpy, strcat, strlen (mode strings) +#include // for BUFSIZ + +// Internal buffer sizes (default and "unbuffered" versions) +#define BIGBUFSIZE BUFSIZ +#define SMALLBUFSIZE 1 + +/*****************************************************************************/ + +// Default constructor +gzfilebuf::gzfilebuf() +: file(NULL), io_mode(std::ios_base::openmode(0)), own_fd(false), + buffer(NULL), buffer_size(BIGBUFSIZE), own_buffer(true) +{ + // No buffers to start with + this->disable_buffer(); +} + +// Destructor +gzfilebuf::~gzfilebuf() +{ + // Sync output buffer and close only if responsible for file + // (i.e. attached streams should be left open at this stage) + this->sync(); + if (own_fd) + this->close(); + // Make sure internal buffer is deallocated + this->disable_buffer(); +} + +// Set compression level and strategy +int +gzfilebuf::setcompression(int comp_level, + int comp_strategy) +{ + return gzsetparams(file, comp_level, comp_strategy); +} + +// Open gzipped file +gzfilebuf* +gzfilebuf::open(const char *name, + std::ios_base::openmode mode) +{ + // Fail if file already open + if (this->is_open()) + return NULL; + // Don't support simultaneous read/write access (yet) + if ((mode & std::ios_base::in) && (mode & std::ios_base::out)) + return NULL; + + // Build mode string for gzopen and check it [27.8.1.3.2] + char char_mode[6] = "\0\0\0\0\0"; + if (!this->open_mode(mode, char_mode)) + return NULL; + + // Attempt to open file + if ((file = gzopen(name, char_mode)) == NULL) + return NULL; + + // On success, allocate internal buffer and set flags + this->enable_buffer(); + io_mode = mode; + own_fd = true; + return this; +} + +// Attach to gzipped file +gzfilebuf* +gzfilebuf::attach(int fd, + std::ios_base::openmode mode) +{ + // Fail if file already open + if (this->is_open()) + return NULL; + // Don't support simultaneous read/write access (yet) + if ((mode & std::ios_base::in) && (mode & std::ios_base::out)) + return NULL; + + // Build mode string for gzdopen and check it [27.8.1.3.2] + char char_mode[6] = "\0\0\0\0\0"; + if (!this->open_mode(mode, char_mode)) + return NULL; + + // Attempt to attach to file + if ((file = gzdopen(fd, char_mode)) == NULL) + return NULL; + + // On success, allocate internal buffer and set flags + this->enable_buffer(); + io_mode = mode; + own_fd = false; + return this; +} + +// Close gzipped file +gzfilebuf* +gzfilebuf::close() +{ + // Fail immediately if no file is open + if (!this->is_open()) + return NULL; + // Assume success + gzfilebuf* retval = this; + // Attempt to sync and close gzipped file + if (this->sync() == -1) + retval = NULL; + if (gzclose(file) < 0) + retval = NULL; + // File is now gone anyway (postcondition [27.8.1.3.8]) + file = NULL; + own_fd = false; + // Destroy internal buffer if it exists + this->disable_buffer(); + return retval; +} + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +// Convert int open mode to mode string +bool +gzfilebuf::open_mode(std::ios_base::openmode mode, + char* c_mode) const +{ + bool testb = mode & std::ios_base::binary; + bool testi = mode & std::ios_base::in; + bool testo = mode & std::ios_base::out; + bool testt = mode & std::ios_base::trunc; + bool testa = mode & std::ios_base::app; + + // Check for valid flag combinations - see [27.8.1.3.2] (Table 92) + // Original zfstream hardcoded the compression level to maximum here... + // Double the time for less than 1% size improvement seems + // excessive though - keeping it at the default level + // To change back, just append "9" to the next three mode strings + if (!testi && testo && !testt && !testa) + strcpy(c_mode, "w"); + if (!testi && testo && !testt && testa) + strcpy(c_mode, "a"); + if (!testi && testo && testt && !testa) + strcpy(c_mode, "w"); + if (testi && !testo && !testt && !testa) + strcpy(c_mode, "r"); + // No read/write mode yet +// if (testi && testo && !testt && !testa) +// strcpy(c_mode, "r+"); +// if (testi && testo && testt && !testa) +// strcpy(c_mode, "w+"); + + // Mode string should be empty for invalid combination of flags + if (strlen(c_mode) == 0) + return false; + if (testb) + strcat(c_mode, "b"); + return true; +} + +// Determine number of characters in internal get buffer +std::streamsize +gzfilebuf::showmanyc() +{ + // Calls to underflow will fail if file not opened for reading + if (!this->is_open() || !(io_mode & std::ios_base::in)) + return -1; + // Make sure get area is in use + if (this->gptr() && (this->gptr() < this->egptr())) + return std::streamsize(this->egptr() - this->gptr()); + else + return 0; +} + +// Fill get area from gzipped file +gzfilebuf::int_type +gzfilebuf::underflow() +{ + // If something is left in the get area by chance, return it + // (this shouldn't normally happen, as underflow is only supposed + // to be called when gptr >= egptr, but it serves as error check) + if (this->gptr() && (this->gptr() < this->egptr())) + return traits_type::to_int_type(*(this->gptr())); + + // If the file hasn't been opened for reading, produce error + if (!this->is_open() || !(io_mode & std::ios_base::in)) + return traits_type::eof(); + + // Attempt to fill internal buffer from gzipped file + // (buffer must be guaranteed to exist...) + int bytes_read = gzread(file, buffer, buffer_size); + // Indicates error or EOF + if (bytes_read <= 0) + { + // Reset get area + this->setg(buffer, buffer, buffer); + return traits_type::eof(); + } + // Make all bytes read from file available as get area + this->setg(buffer, buffer, buffer + bytes_read); + + // Return next character in get area + return traits_type::to_int_type(*(this->gptr())); +} + +// Write put area to gzipped file +gzfilebuf::int_type +gzfilebuf::overflow(int_type c) +{ + // Determine whether put area is in use + if (this->pbase()) + { + // Double-check pointer range + if (this->pptr() > this->epptr() || this->pptr() < this->pbase()) + return traits_type::eof(); + // Add extra character to buffer if not EOF + if (!traits_type::eq_int_type(c, traits_type::eof())) + { + *(this->pptr()) = traits_type::to_char_type(c); + this->pbump(1); + } + // Number of characters to write to file + int bytes_to_write = this->pptr() - this->pbase(); + // Overflow doesn't fail if nothing is to be written + if (bytes_to_write > 0) + { + // If the file hasn't been opened for writing, produce error + if (!this->is_open() || !(io_mode & std::ios_base::out)) + return traits_type::eof(); + // If gzipped file won't accept all bytes written to it, fail + if (gzwrite(file, this->pbase(), bytes_to_write) != bytes_to_write) + return traits_type::eof(); + // Reset next pointer to point to pbase on success + this->pbump(-bytes_to_write); + } + } + // Write extra character to file if not EOF + else if (!traits_type::eq_int_type(c, traits_type::eof())) + { + // If the file hasn't been opened for writing, produce error + if (!this->is_open() || !(io_mode & std::ios_base::out)) + return traits_type::eof(); + // Impromptu char buffer (allows "unbuffered" output) + char_type last_char = traits_type::to_char_type(c); + // If gzipped file won't accept this character, fail + if (gzwrite(file, &last_char, 1) != 1) + return traits_type::eof(); + } + + // If you got here, you have succeeded (even if c was EOF) + // The return value should therefore be non-EOF + if (traits_type::eq_int_type(c, traits_type::eof())) + return traits_type::not_eof(c); + else + return c; +} + +// Assign new buffer +std::streambuf* +gzfilebuf::setbuf(char_type* p, + std::streamsize n) +{ + // First make sure stuff is sync'ed, for safety + if (this->sync() == -1) + return NULL; + // If buffering is turned off on purpose via setbuf(0,0), still allocate one... + // "Unbuffered" only really refers to put [27.8.1.4.10], while get needs at + // least a buffer of size 1 (very inefficient though, therefore make it bigger?) + // This follows from [27.5.2.4.3]/12 (gptr needs to point at something, it seems) + if (!p || !n) + { + // Replace existing buffer (if any) with small internal buffer + this->disable_buffer(); + buffer = NULL; + buffer_size = 0; + own_buffer = true; + this->enable_buffer(); + } + else + { + // Replace existing buffer (if any) with external buffer + this->disable_buffer(); + buffer = p; + buffer_size = n; + own_buffer = false; + this->enable_buffer(); + } + return this; +} + +// Write put area to gzipped file (i.e. ensures that put area is empty) +int +gzfilebuf::sync() +{ + return traits_type::eq_int_type(this->overflow(), traits_type::eof()) ? -1 : 0; +} + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +// Allocate internal buffer +void +gzfilebuf::enable_buffer() +{ + // If internal buffer required, allocate one + if (own_buffer && !buffer) + { + // Check for buffered vs. "unbuffered" + if (buffer_size > 0) + { + // Allocate internal buffer + buffer = new char_type[buffer_size]; + // Get area starts empty and will be expanded by underflow as need arises + this->setg(buffer, buffer, buffer); + // Setup entire internal buffer as put area. + // The one-past-end pointer actually points to the last element of the buffer, + // so that overflow(c) can safely add the extra character c to the sequence. + // These pointers remain in place for the duration of the buffer + this->setp(buffer, buffer + buffer_size - 1); + } + else + { + // Even in "unbuffered" case, (small?) get buffer is still required + buffer_size = SMALLBUFSIZE; + buffer = new char_type[buffer_size]; + this->setg(buffer, buffer, buffer); + // "Unbuffered" means no put buffer + this->setp(0, 0); + } + } + else + { + // If buffer already allocated, reset buffer pointers just to make sure no + // stale chars are lying around + this->setg(buffer, buffer, buffer); + this->setp(buffer, buffer + buffer_size - 1); + } +} + +// Destroy internal buffer +void +gzfilebuf::disable_buffer() +{ + // If internal buffer exists, deallocate it + if (own_buffer && buffer) + { + // Preserve unbuffered status by zeroing size + if (!this->pbase()) + buffer_size = 0; + delete[] buffer; + buffer = NULL; + this->setg(0, 0, 0); + this->setp(0, 0); + } + else + { + // Reset buffer pointers to initial state if external buffer exists + this->setg(buffer, buffer, buffer); + if (buffer) + this->setp(buffer, buffer + buffer_size - 1); + else + this->setp(0, 0); + } +} + +/*****************************************************************************/ + +// Default constructor initializes stream buffer +gzifstream::gzifstream() +: std::istream(NULL), sb() +{ this->init(&sb); } + +// Initialize stream buffer and open file +gzifstream::gzifstream(const char* name, + std::ios_base::openmode mode) +: std::istream(NULL), sb() +{ + this->init(&sb); + this->open(name, mode); +} + +// Initialize stream buffer and attach to file +gzifstream::gzifstream(int fd, + std::ios_base::openmode mode) +: std::istream(NULL), sb() +{ + this->init(&sb); + this->attach(fd, mode); +} + +// Open file and go into fail() state if unsuccessful +void +gzifstream::open(const char* name, + std::ios_base::openmode mode) +{ + if (!sb.open(name, mode | std::ios_base::in)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Attach to file and go into fail() state if unsuccessful +void +gzifstream::attach(int fd, + std::ios_base::openmode mode) +{ + if (!sb.attach(fd, mode | std::ios_base::in)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Close file +void +gzifstream::close() +{ + if (!sb.close()) + this->setstate(std::ios_base::failbit); +} + +/*****************************************************************************/ + +// Default constructor initializes stream buffer +gzofstream::gzofstream() +: std::ostream(NULL), sb() +{ this->init(&sb); } + +// Initialize stream buffer and open file +gzofstream::gzofstream(const char* name, + std::ios_base::openmode mode) +: std::ostream(NULL), sb() +{ + this->init(&sb); + this->open(name, mode); +} + +// Initialize stream buffer and attach to file +gzofstream::gzofstream(int fd, + std::ios_base::openmode mode) +: std::ostream(NULL), sb() +{ + this->init(&sb); + this->attach(fd, mode); +} + +// Open file and go into fail() state if unsuccessful +void +gzofstream::open(const char* name, + std::ios_base::openmode mode) +{ + if (!sb.open(name, mode | std::ios_base::out)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Attach to file and go into fail() state if unsuccessful +void +gzofstream::attach(int fd, + std::ios_base::openmode mode) +{ + if (!sb.attach(fd, mode | std::ios_base::out)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Close file +void +gzofstream::close() +{ + if (!sb.close()) + this->setstate(std::ios_base::failbit); +} diff --git a/common/dist/zlib/contrib/iostream3/zfstream.h b/common/dist/zlib/contrib/iostream3/zfstream.h new file mode 100644 index 000000000..67735af68 --- /dev/null +++ b/common/dist/zlib/contrib/iostream3/zfstream.h @@ -0,0 +1,468 @@ +/* $NetBSD: zfstream.h,v 1.1.1.1 2006/01/14 20:10:54 christos Exp $ */ + +/* + * A C++ I/O streams interface to the zlib gz* functions + * + * by Ludwig Schwardt + * original version by Kevin Ruland + * + * This version is standard-compliant and compatible with gcc 3.x. + */ + +#ifndef ZFSTREAM_H +#define ZFSTREAM_H + +#include // not iostream, since we don't need cin/cout +#include +#include "zlib.h" + +/*****************************************************************************/ + +/** + * @brief Gzipped file stream buffer class. + * + * This class implements basic_filebuf for gzipped files. It doesn't yet support + * seeking (allowed by zlib but slow/limited), putback and read/write access + * (tricky). Otherwise, it attempts to be a drop-in replacement for the standard + * file streambuf. +*/ +class gzfilebuf : public std::streambuf +{ +public: + // Default constructor. + gzfilebuf(); + + // Destructor. + virtual + ~gzfilebuf(); + + /** + * @brief Set compression level and strategy on the fly. + * @param comp_level Compression level (see zlib.h for allowed values) + * @param comp_strategy Compression strategy (see zlib.h for allowed values) + * @return Z_OK on success, Z_STREAM_ERROR otherwise. + * + * Unfortunately, these parameters cannot be modified separately, as the + * previous zfstream version assumed. Since the strategy is seldom changed, + * it can default and setcompression(level) then becomes like the old + * setcompressionlevel(level). + */ + int + setcompression(int comp_level, + int comp_strategy = Z_DEFAULT_STRATEGY); + + /** + * @brief Check if file is open. + * @return True if file is open. + */ + bool + is_open() const { return (file != NULL); } + + /** + * @brief Open gzipped file. + * @param name File name. + * @param mode Open mode flags. + * @return @c this on success, NULL on failure. + */ + gzfilebuf* + open(const char* name, + std::ios_base::openmode mode); + + /** + * @brief Attach to already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags. + * @return @c this on success, NULL on failure. + */ + gzfilebuf* + attach(int fd, + std::ios_base::openmode mode); + + /** + * @brief Close gzipped file. + * @return @c this on success, NULL on failure. + */ + gzfilebuf* + close(); + +protected: + /** + * @brief Convert ios open mode int to mode string used by zlib. + * @return True if valid mode flag combination. + */ + bool + open_mode(std::ios_base::openmode mode, + char* c_mode) const; + + /** + * @brief Number of characters available in stream buffer. + * @return Number of characters. + * + * This indicates number of characters in get area of stream buffer. + * These characters can be read without accessing the gzipped file. + */ + virtual std::streamsize + showmanyc(); + + /** + * @brief Fill get area from gzipped file. + * @return First character in get area on success, EOF on error. + * + * This actually reads characters from gzipped file to stream + * buffer. Always buffered. + */ + virtual int_type + underflow(); + + /** + * @brief Write put area to gzipped file. + * @param c Extra character to add to buffer contents. + * @return Non-EOF on success, EOF on error. + * + * This actually writes characters in stream buffer to + * gzipped file. With unbuffered output this is done one + * character at a time. + */ + virtual int_type + overflow(int_type c = traits_type::eof()); + + /** + * @brief Installs external stream buffer. + * @param p Pointer to char buffer. + * @param n Size of external buffer. + * @return @c this on success, NULL on failure. + * + * Call setbuf(0,0) to enable unbuffered output. + */ + virtual std::streambuf* + setbuf(char_type* p, + std::streamsize n); + + /** + * @brief Flush stream buffer to file. + * @return 0 on success, -1 on error. + * + * This calls underflow(EOF) to do the job. + */ + virtual int + sync(); + +// +// Some future enhancements +// +// virtual int_type uflow(); +// virtual int_type pbackfail(int_type c = traits_type::eof()); +// virtual pos_type +// seekoff(off_type off, +// std::ios_base::seekdir way, +// std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out); +// virtual pos_type +// seekpos(pos_type sp, +// std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out); + +private: + /** + * @brief Allocate internal buffer. + * + * This function is safe to call multiple times. It will ensure + * that a proper internal buffer exists if it is required. If the + * buffer already exists or is external, the buffer pointers will be + * reset to their original state. + */ + void + enable_buffer(); + + /** + * @brief Destroy internal buffer. + * + * This function is safe to call multiple times. It will ensure + * that the internal buffer is deallocated if it exists. In any + * case, it will also reset the buffer pointers. + */ + void + disable_buffer(); + + /** + * Underlying file pointer. + */ + gzFile file; + + /** + * Mode in which file was opened. + */ + std::ios_base::openmode io_mode; + + /** + * @brief True if this object owns file descriptor. + * + * This makes the class responsible for closing the file + * upon destruction. + */ + bool own_fd; + + /** + * @brief Stream buffer. + * + * For simplicity this remains allocated on the free store for the + * entire life span of the gzfilebuf object, unless replaced by setbuf. + */ + char_type* buffer; + + /** + * @brief Stream buffer size. + * + * Defaults to system default buffer size (typically 8192 bytes). + * Modified by setbuf. + */ + std::streamsize buffer_size; + + /** + * @brief True if this object owns stream buffer. + * + * This makes the class responsible for deleting the buffer + * upon destruction. + */ + bool own_buffer; +}; + +/*****************************************************************************/ + +/** + * @brief Gzipped file input stream class. + * + * This class implements ifstream for gzipped files. Seeking and putback + * is not supported yet. +*/ +class gzifstream : public std::istream +{ +public: + // Default constructor + gzifstream(); + + /** + * @brief Construct stream on gzipped file to be opened. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::in). + */ + explicit + gzifstream(const char* name, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * @brief Construct stream on already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::in). + */ + explicit + gzifstream(int fd, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * Obtain underlying stream buffer. + */ + gzfilebuf* + rdbuf() const + { return const_cast(&sb); } + + /** + * @brief Check if file is open. + * @return True if file is open. + */ + bool + is_open() { return sb.is_open(); } + + /** + * @brief Open gzipped file. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::in). + * + * Stream will be in state good() if file opens successfully; + * otherwise in state fail(). This differs from the behavior of + * ifstream, which never sets the state to good() and therefore + * won't allow you to reuse the stream for a second file unless + * you manually clear() the state. The choice is a matter of + * convenience. + */ + void + open(const char* name, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * @brief Attach to already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::in). + * + * Stream will be in state good() if attach succeeded; otherwise + * in state fail(). + */ + void + attach(int fd, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * @brief Close gzipped file. + * + * Stream will be in state fail() if close failed. + */ + void + close(); + +private: + /** + * Underlying stream buffer. + */ + gzfilebuf sb; +}; + +/*****************************************************************************/ + +/** + * @brief Gzipped file output stream class. + * + * This class implements ofstream for gzipped files. Seeking and putback + * is not supported yet. +*/ +class gzofstream : public std::ostream +{ +public: + // Default constructor + gzofstream(); + + /** + * @brief Construct stream on gzipped file to be opened. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::out). + */ + explicit + gzofstream(const char* name, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * @brief Construct stream on already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::out). + */ + explicit + gzofstream(int fd, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * Obtain underlying stream buffer. + */ + gzfilebuf* + rdbuf() const + { return const_cast(&sb); } + + /** + * @brief Check if file is open. + * @return True if file is open. + */ + bool + is_open() { return sb.is_open(); } + + /** + * @brief Open gzipped file. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::out). + * + * Stream will be in state good() if file opens successfully; + * otherwise in state fail(). This differs from the behavior of + * ofstream, which never sets the state to good() and therefore + * won't allow you to reuse the stream for a second file unless + * you manually clear() the state. The choice is a matter of + * convenience. + */ + void + open(const char* name, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * @brief Attach to already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::out). + * + * Stream will be in state good() if attach succeeded; otherwise + * in state fail(). + */ + void + attach(int fd, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * @brief Close gzipped file. + * + * Stream will be in state fail() if close failed. + */ + void + close(); + +private: + /** + * Underlying stream buffer. + */ + gzfilebuf sb; +}; + +/*****************************************************************************/ + +/** + * @brief Gzipped file output stream manipulator class. + * + * This class defines a two-argument manipulator for gzofstream. It is used + * as base for the setcompression(int,int) manipulator. +*/ +template + class gzomanip2 + { + public: + // Allows insertor to peek at internals + template + friend gzofstream& + operator<<(gzofstream&, + const gzomanip2&); + + // Constructor + gzomanip2(gzofstream& (*f)(gzofstream&, T1, T2), + T1 v1, + T2 v2); + private: + // Underlying manipulator function + gzofstream& + (*func)(gzofstream&, T1, T2); + + // Arguments for manipulator function + T1 val1; + T2 val2; + }; + +/*****************************************************************************/ + +// Manipulator function thunks through to stream buffer +inline gzofstream& +setcompression(gzofstream &gzs, int l, int s = Z_DEFAULT_STRATEGY) +{ + (gzs.rdbuf())->setcompression(l, s); + return gzs; +} + +// Manipulator constructor stores arguments +template + inline + gzomanip2::gzomanip2(gzofstream &(*f)(gzofstream &, T1, T2), + T1 v1, + T2 v2) + : func(f), val1(v1), val2(v2) + { } + +// Insertor applies underlying manipulator function to stream +template + inline gzofstream& + operator<<(gzofstream& s, const gzomanip2& m) + { return (*m.func)(s, m.val1, m.val2); } + +// Insert this onto stream to simplify setting of compression level +inline gzomanip2 +setcompression(int l, int s = Z_DEFAULT_STRATEGY) +{ return gzomanip2(&setcompression, l, s); } + +#endif // ZFSTREAM_H diff --git a/common/dist/zlib/contrib/masm686/match.asm b/common/dist/zlib/contrib/masm686/match.asm new file mode 100644 index 000000000..4b03a71ab --- /dev/null +++ b/common/dist/zlib/contrib/masm686/match.asm @@ -0,0 +1,413 @@ + +; match.asm -- Pentium-Pro optimized version of longest_match() +; +; Updated for zlib 1.1.3 and converted to MASM 6.1x +; Copyright (C) 2000 Dan Higdon +; and Chuck Walbourn +; Corrections by Cosmin Truta +; +; This is free software; you can redistribute it and/or modify it +; under the terms of the GNU General Public License. + +; Based on match.S +; Written for zlib 1.1.2 +; Copyright (C) 1998 Brian Raiter +; +; Modified by Gilles Vollant (2005) for add gzhead and gzindex + + .686P + .MODEL FLAT + +;=========================================================================== +; EQUATES +;=========================================================================== + +MAX_MATCH EQU 258 +MIN_MATCH EQU 3 +MIN_LOOKAHEAD EQU (MAX_MATCH + MIN_MATCH + 1) +MAX_MATCH_8 EQU ((MAX_MATCH + 7) AND (NOT 7)) + +;=========================================================================== +; STRUCTURES +;=========================================================================== + +; This STRUCT assumes a 4-byte alignment + +DEFLATE_STATE STRUCT +ds_strm dd ? +ds_status dd ? +ds_pending_buf dd ? +ds_pending_buf_size dd ? +ds_pending_out dd ? +ds_pending dd ? +ds_wrap dd ? +; gzhead and gzindex are added in zlib 1.2.2.2 (see deflate.h) +ds_gzhead dd ? +ds_gzindex dd ? +ds_data_type db ? +ds_method db ? + db ? ; padding + db ? ; padding +ds_last_flush dd ? +ds_w_size dd ? ; used +ds_w_bits dd ? +ds_w_mask dd ? ; used +ds_window dd ? ; used +ds_window_size dd ? +ds_prev dd ? ; used +ds_head dd ? +ds_ins_h dd ? +ds_hash_size dd ? +ds_hash_bits dd ? +ds_hash_mask dd ? +ds_hash_shift dd ? +ds_block_start dd ? +ds_match_length dd ? ; used +ds_prev_match dd ? ; used +ds_match_available dd ? +ds_strstart dd ? ; used +ds_match_start dd ? ; used +ds_lookahead dd ? ; used +ds_prev_length dd ? ; used +ds_max_chain_length dd ? ; used +ds_max_laxy_match dd ? +ds_level dd ? +ds_strategy dd ? +ds_good_match dd ? ; used +ds_nice_match dd ? ; used + +; Don't need anymore of the struct for match +DEFLATE_STATE ENDS + +;=========================================================================== +; CODE +;=========================================================================== +_TEXT SEGMENT + +;--------------------------------------------------------------------------- +; match_init +;--------------------------------------------------------------------------- + ALIGN 4 +PUBLIC _match_init +_match_init PROC + ; no initialization needed + ret +_match_init ENDP + +;--------------------------------------------------------------------------- +; uInt longest_match(deflate_state *deflatestate, IPos curmatch) +;--------------------------------------------------------------------------- + ALIGN 4 + +PUBLIC _longest_match +_longest_match PROC + +; Since this code uses EBP for a scratch register, the stack frame must +; be manually constructed and referenced relative to the ESP register. + +; Stack image +; Variables +chainlenwmask = 0 ; high word: current chain len + ; low word: s->wmask +window = 4 ; local copy of s->window +windowbestlen = 8 ; s->window + bestlen +scanend = 12 ; last two bytes of string +scanstart = 16 ; first two bytes of string +scanalign = 20 ; dword-misalignment of string +nicematch = 24 ; a good enough match size +bestlen = 28 ; size of best match so far +scan = 32 ; ptr to string wanting match +varsize = 36 ; number of bytes (also offset to last saved register) + +; Saved Registers (actually pushed into place) +ebx_save = 36 +edi_save = 40 +esi_save = 44 +ebp_save = 48 + +; Parameters +retaddr = 52 +deflatestate = 56 +curmatch = 60 + +; Save registers that the compiler may be using + push ebp + push edi + push esi + push ebx + +; Allocate local variable space + sub esp,varsize + +; Retrieve the function arguments. ecx will hold cur_match +; throughout the entire function. edx will hold the pointer to the +; deflate_state structure during the function's setup (before +; entering the main loop). + + mov edx, [esp+deflatestate] +ASSUME edx:PTR DEFLATE_STATE + + mov ecx, [esp+curmatch] + +; uInt wmask = s->w_mask; +; unsigned chain_length = s->max_chain_length; +; if (s->prev_length >= s->good_match) { +; chain_length >>= 2; +; } + + mov eax, [edx].ds_prev_length + mov ebx, [edx].ds_good_match + cmp eax, ebx + mov eax, [edx].ds_w_mask + mov ebx, [edx].ds_max_chain_length + jl SHORT LastMatchGood + shr ebx, 2 +LastMatchGood: + +; chainlen is decremented once beforehand so that the function can +; use the sign flag instead of the zero flag for the exit test. +; It is then shifted into the high word, to make room for the wmask +; value, which it will always accompany. + + dec ebx + shl ebx, 16 + or ebx, eax + mov [esp+chainlenwmask], ebx + +; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + + mov eax, [edx].ds_nice_match + mov ebx, [edx].ds_lookahead + cmp ebx, eax + jl SHORT LookaheadLess + mov ebx, eax +LookaheadLess: + mov [esp+nicematch], ebx + +;/* register Bytef *scan = s->window + s->strstart; */ + + mov esi, [edx].ds_window + mov [esp+window], esi + mov ebp, [edx].ds_strstart + lea edi, [esi+ebp] + mov [esp+scan],edi + +;/* Determine how many bytes the scan ptr is off from being */ +;/* dword-aligned. */ + + mov eax, edi + neg eax + and eax, 3 + mov [esp+scanalign], eax + +;/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */ +;/* s->strstart - (IPos)MAX_DIST(s) : NIL; */ + + mov eax, [edx].ds_w_size + sub eax, MIN_LOOKAHEAD + sub ebp, eax + jg SHORT LimitPositive + xor ebp, ebp +LimitPositive: + +;/* int best_len = s->prev_length; */ + + mov eax, [edx].ds_prev_length + mov [esp+bestlen], eax + +;/* Store the sum of s->window + best_len in %esi locally, and in %esi. */ + + add esi, eax + mov [esp+windowbestlen], esi + +;/* register ush scan_start = *(ushf*)scan; */ +;/* register ush scan_end = *(ushf*)(scan+best_len-1); */ +;/* Posf *prev = s->prev; */ + + movzx ebx, WORD PTR[edi] + mov [esp+scanstart], ebx + movzx ebx, WORD PTR[eax+edi-1] + mov [esp+scanend], ebx + mov edi, [edx].ds_prev + +;/* Jump into the main loop. */ + + mov edx, [esp+chainlenwmask] + jmp SHORT LoopEntry + +;/* do { +; * match = s->window + cur_match; +; * if (*(ushf*)(match+best_len-1) != scan_end || +; * *(ushf*)match != scan_start) continue; +; * [...] +; * } while ((cur_match = prev[cur_match & wmask]) > limit +; * && --chain_length != 0); +; * +; * Here is the inner loop of the function. The function will spend the +; * majority of its time in this loop, and majority of that time will +; * be spent in the first ten instructions. +; * +; * Within this loop: +; * %ebx = scanend +; * %ecx = curmatch +; * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) +; * %esi = windowbestlen - i.e., (window + bestlen) +; * %edi = prev +; * %ebp = limit +; */ + + ALIGN 4 +LookupLoop: + and ecx, edx + movzx ecx, WORD PTR[edi+ecx*2] + cmp ecx, ebp + jbe LeaveNow + sub edx, 000010000H + js LeaveNow + +LoopEntry: + movzx eax, WORD PTR[esi+ecx-1] + cmp eax, ebx + jnz SHORT LookupLoop + + mov eax, [esp+window] + movzx eax, WORD PTR[eax+ecx] + cmp eax, [esp+scanstart] + jnz SHORT LookupLoop + +;/* Store the current value of chainlen. */ + + mov [esp+chainlenwmask], edx + +;/* Point %edi to the string under scrutiny, and %esi to the string we */ +;/* are hoping to match it up with. In actuality, %esi and %edi are */ +;/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */ +;/* initialized to -(MAX_MATCH_8 - scanalign). */ + + mov esi, [esp+window] + mov edi, [esp+scan] + add esi, ecx + mov eax, [esp+scanalign] + mov edx, -MAX_MATCH_8 + lea edi, [edi+eax+MAX_MATCH_8] + lea esi, [esi+eax+MAX_MATCH_8] + +;/* Test the strings for equality, 8 bytes at a time. At the end, +; * adjust %edx so that it is offset to the exact byte that mismatched. +; * +; * We already know at this point that the first three bytes of the +; * strings match each other, and they can be safely passed over before +; * starting the compare loop. So what this code does is skip over 0-3 +; * bytes, as much as necessary in order to dword-align the %edi +; * pointer. (%esi will still be misaligned three times out of four.) +; * +; * It should be confessed that this loop usually does not represent +; * much of the total running time. Replacing it with a more +; * straightforward "rep cmpsb" would not drastically degrade +; * performance. +; */ + +LoopCmps: + mov eax, DWORD PTR[esi+edx] + xor eax, DWORD PTR[edi+edx] + jnz SHORT LeaveLoopCmps + + mov eax, DWORD PTR[esi+edx+4] + xor eax, DWORD PTR[edi+edx+4] + jnz SHORT LeaveLoopCmps4 + + add edx, 8 + jnz SHORT LoopCmps + jmp LenMaximum + ALIGN 4 + +LeaveLoopCmps4: + add edx, 4 + +LeaveLoopCmps: + test eax, 00000FFFFH + jnz SHORT LenLower + + add edx, 2 + shr eax, 16 + +LenLower: + sub al, 1 + adc edx, 0 + +;/* Calculate the length of the match. If it is longer than MAX_MATCH, */ +;/* then automatically accept it as the best possible match and leave. */ + + lea eax, [edi+edx] + mov edi, [esp+scan] + sub eax, edi + cmp eax, MAX_MATCH + jge SHORT LenMaximum + +;/* If the length of the match is not longer than the best match we */ +;/* have so far, then forget it and return to the lookup loop. */ + + mov edx, [esp+deflatestate] + mov ebx, [esp+bestlen] + cmp eax, ebx + jg SHORT LongerMatch + mov esi, [esp+windowbestlen] + mov edi, [edx].ds_prev + mov ebx, [esp+scanend] + mov edx, [esp+chainlenwmask] + jmp LookupLoop + ALIGN 4 + +;/* s->match_start = cur_match; */ +;/* best_len = len; */ +;/* if (len >= nice_match) break; */ +;/* scan_end = *(ushf*)(scan+best_len-1); */ + +LongerMatch: + mov ebx, [esp+nicematch] + mov [esp+bestlen], eax + mov [edx].ds_match_start, ecx + cmp eax, ebx + jge SHORT LeaveNow + mov esi, [esp+window] + add esi, eax + mov [esp+windowbestlen], esi + movzx ebx, WORD PTR[edi+eax-1] + mov edi, [edx].ds_prev + mov [esp+scanend], ebx + mov edx, [esp+chainlenwmask] + jmp LookupLoop + ALIGN 4 + +;/* Accept the current string, with the maximum possible length. */ + +LenMaximum: + mov edx, [esp+deflatestate] + mov DWORD PTR[esp+bestlen], MAX_MATCH + mov [edx].ds_match_start, ecx + +;/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */ +;/* return s->lookahead; */ + +LeaveNow: + mov edx, [esp+deflatestate] + mov ebx, [esp+bestlen] + mov eax, [edx].ds_lookahead + cmp ebx, eax + jg SHORT LookaheadRet + mov eax, ebx +LookaheadRet: + +; Restore the stack and return from whence we came. + + add esp, varsize + pop ebx + pop esi + pop edi + pop ebp + ret + +_longest_match ENDP + +_TEXT ENDS +END diff --git a/common/dist/zlib/contrib/masmx64/bld_ml64.bat b/common/dist/zlib/contrib/masmx64/bld_ml64.bat new file mode 100644 index 000000000..8f9343d0a --- /dev/null +++ b/common/dist/zlib/contrib/masmx64/bld_ml64.bat @@ -0,0 +1,2 @@ +ml64.exe /Flinffasx64 /c /Zi inffasx64.asm +ml64.exe /Flgvmat64 /c /Zi gvmat64.asm diff --git a/common/dist/zlib/contrib/masmx64/gvmat64.asm b/common/dist/zlib/contrib/masmx64/gvmat64.asm new file mode 100644 index 000000000..790d65554 --- /dev/null +++ b/common/dist/zlib/contrib/masmx64/gvmat64.asm @@ -0,0 +1,513 @@ +;uInt longest_match_x64( +; deflate_state *s, +; IPos cur_match); /* current match */ + +; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86 +; Copyright (C) 1995-2005 Jean-loup Gailly, Brian Raiter and Gilles Vollant. +; +; File written by Gilles Vollant, by converting to assembly the longest_match +; from Jean-loup Gailly in deflate.c of zLib and infoZip zip. +; +; and by taking inspiration on asm686 with masm, optimised assembly code +; from Brian Raiter, written 1998 +; +; http://www.zlib.net +; http://www.winimage.com/zLibDll +; http://www.muppetlabs.com/~breadbox/software/assembly.html +; +; to compile this file for infozip Zip, I use option: +; ml64.exe /Flgvmat64 /c /Zi /DINFOZIP gvmat64.asm +; +; to compile this file for zLib, I use option: +; ml64.exe /Flgvmat64 /c /Zi gvmat64.asm +; Be carrefull to adapt zlib1222add below to your version of zLib +; (if you use a version of zLib before 1.0.4 or after 1.2.2.2, change +; value of zlib1222add later) +; +; This file compile with Microsoft Macro Assembler (x64) for AMD64 +; +; ml64.exe is given with Visual Studio 2005 and Windows 2003 server DDK +; +; (you can get Windows 2003 server DDK with ml64 and cl for AMD64 from +; http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price) +; + + +;uInt longest_match(s, cur_match) +; deflate_state *s; +; IPos cur_match; /* current match */ +.code +longest_match PROC + + +;LocalVarsSize equ 88 + LocalVarsSize equ 72 + +; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12 +; free register : r14,r15 +; register can be saved : rsp + + chainlenwmask equ rsp + 8 - LocalVarsSize ; high word: current chain len + ; low word: s->wmask +;window equ rsp + xx - LocalVarsSize ; local copy of s->window ; stored in r10 +;windowbestlen equ rsp + xx - LocalVarsSize ; s->window + bestlen , use r10+r11 +;scanstart equ rsp + xx - LocalVarsSize ; first two bytes of string ; stored in r12w +;scanend equ rsp + xx - LocalVarsSize ; last two bytes of string use ebx +;scanalign equ rsp + xx - LocalVarsSize ; dword-misalignment of string r13 +;bestlen equ rsp + xx - LocalVarsSize ; size of best match so far -> r11d +;scan equ rsp + xx - LocalVarsSize ; ptr to string wanting match -> r9 +IFDEF INFOZIP +ELSE + nicematch equ (rsp + 16 - LocalVarsSize) ; a good enough match size +ENDIF + +save_rdi equ rsp + 24 - LocalVarsSize +save_rsi equ rsp + 32 - LocalVarsSize +save_rbx equ rsp + 40 - LocalVarsSize +save_rbp equ rsp + 48 - LocalVarsSize +save_r12 equ rsp + 56 - LocalVarsSize +save_r13 equ rsp + 64 - LocalVarsSize +;save_r14 equ rsp + 72 - LocalVarsSize +;save_r15 equ rsp + 80 - LocalVarsSize + + + +; all the +4 offsets are due to the addition of pending_buf_size (in zlib +; in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, remove the +4). +; Note : these value are good with a 8 bytes boundary pack structure + + + MAX_MATCH equ 258 + MIN_MATCH equ 3 + MIN_LOOKAHEAD equ (MAX_MATCH+MIN_MATCH+1) + + +;;; Offsets for fields in the deflate_state structure. These numbers +;;; are calculated from the definition of deflate_state, with the +;;; assumption that the compiler will dword-align the fields. (Thus, +;;; changing the definition of deflate_state could easily cause this +;;; program to crash horribly, without so much as a warning at +;;; compile time. Sigh.) + +; all the +zlib1222add offsets are due to the addition of fields +; in zlib in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). +; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). +; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). + + +IFDEF INFOZIP + +_DATA SEGMENT +COMM window_size:DWORD +; WMask ; 7fff +COMM window:BYTE:010040H +COMM prev:WORD:08000H +; MatchLen : unused +; PrevMatch : unused +COMM strstart:DWORD +COMM match_start:DWORD +; Lookahead : ignore +COMM prev_length:DWORD ; PrevLen +COMM max_chain_length:DWORD +COMM good_match:DWORD +COMM nice_match:DWORD +prev_ad equ OFFSET prev +window_ad equ OFFSET window +nicematch equ nice_match +_DATA ENDS +WMask equ 07fffh + +ELSE + + IFNDEF zlib1222add + zlib1222add equ 8 + ENDIF +dsWSize equ 56+zlib1222add+(zlib1222add/2) +dsWMask equ 64+zlib1222add+(zlib1222add/2) +dsWindow equ 72+zlib1222add +dsPrev equ 88+zlib1222add +dsMatchLen equ 128+zlib1222add +dsPrevMatch equ 132+zlib1222add +dsStrStart equ 140+zlib1222add +dsMatchStart equ 144+zlib1222add +dsLookahead equ 148+zlib1222add +dsPrevLen equ 152+zlib1222add +dsMaxChainLen equ 156+zlib1222add +dsGoodMatch equ 172+zlib1222add +dsNiceMatch equ 176+zlib1222add + +window_size equ [ rcx + dsWSize] +WMask equ [ rcx + dsWMask] +window_ad equ [ rcx + dsWindow] +prev_ad equ [ rcx + dsPrev] +strstart equ [ rcx + dsStrStart] +match_start equ [ rcx + dsMatchStart] +Lookahead equ [ rcx + dsLookahead] ; 0ffffffffh on infozip +prev_length equ [ rcx + dsPrevLen] +max_chain_length equ [ rcx + dsMaxChainLen] +good_match equ [ rcx + dsGoodMatch] +nice_match equ [ rcx + dsNiceMatch] +ENDIF + +; parameter 1 in r8(deflate state s), param 2 in rdx (cur match) + +; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and +; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp +; +; All registers must be preserved across the call, except for +; rax, rcx, rdx, r8, r9, r10, and r11, which are scratch. + + + +;;; Save registers that the compiler may be using, and adjust esp to +;;; make room for our stack frame. + + +;;; Retrieve the function arguments. r8d will hold cur_match +;;; throughout the entire function. edx will hold the pointer to the +;;; deflate_state structure during the function's setup (before +;;; entering the main loop. + +; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match) + +; this clear high 32 bits of r8, which can be garbage in both r8 and rdx + + mov [save_rdi],rdi + mov [save_rsi],rsi + mov [save_rbx],rbx + mov [save_rbp],rbp +IFDEF INFOZIP + mov r8d,ecx +ELSE + mov r8d,edx +ENDIF + mov [save_r12],r12 + mov [save_r13],r13 +; mov [save_r14],r14 +; mov [save_r15],r15 + + +;;; uInt wmask = s->w_mask; +;;; unsigned chain_length = s->max_chain_length; +;;; if (s->prev_length >= s->good_match) { +;;; chain_length >>= 2; +;;; } + + mov edi, prev_length + mov esi, good_match + mov eax, WMask + mov ebx, max_chain_length + cmp edi, esi + jl LastMatchGood + shr ebx, 2 +LastMatchGood: + +;;; chainlen is decremented once beforehand so that the function can +;;; use the sign flag instead of the zero flag for the exit test. +;;; It is then shifted into the high word, to make room for the wmask +;;; value, which it will always accompany. + + dec ebx + shl ebx, 16 + or ebx, eax + +;;; on zlib only +;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + +IFDEF INFOZIP + mov [chainlenwmask], ebx +; on infozip nice_match = [nice_match] +ELSE + mov eax, nice_match + mov [chainlenwmask], ebx + mov r10d, Lookahead + cmp r10d, eax + cmovnl r10d, eax + mov [nicematch],r10d +ENDIF + +;;; register Bytef *scan = s->window + s->strstart; + mov r10, window_ad + mov ebp, strstart + lea r13, [r10 + rbp] + +;;; Determine how many bytes the scan ptr is off from being +;;; dword-aligned. + + mov r9,r13 + neg r13 + and r13,3 + +;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ? +;;; s->strstart - (IPos)MAX_DIST(s) : NIL; +IFDEF INFOZIP + mov eax,07efah ; MAX_DIST = (WSIZE-MIN_LOOKAHEAD) (0x8000-(3+8+1)) +ELSE + mov eax, window_size + sub eax, MIN_LOOKAHEAD +ENDIF + xor edi,edi + sub ebp, eax + + mov r11d, prev_length + + cmovng ebp,edi + +;;; int best_len = s->prev_length; + + +;;; Store the sum of s->window + best_len in esi locally, and in esi. + + lea rsi,[r10+r11] + +;;; register ush scan_start = *(ushf*)scan; +;;; register ush scan_end = *(ushf*)(scan+best_len-1); +;;; Posf *prev = s->prev; + + movzx r12d,word ptr [r9] + movzx ebx, word ptr [r9 + r11 - 1] + + mov rdi, prev_ad + +;;; Jump into the main loop. + + mov edx, [chainlenwmask] + + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + +LookupLoop1: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry1: + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + +LookupLoop2: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry2: + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + +LookupLoop4: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry4: + + cmp bx,word ptr [rsi + r8 - 1] + jnz LookupLoop1 + jmp LookupLoopIsZero + + +;;; do { +;;; match = s->window + cur_match; +;;; if (*(ushf*)(match+best_len-1) != scan_end || +;;; *(ushf*)match != scan_start) continue; +;;; [...] +;;; } while ((cur_match = prev[cur_match & wmask]) > limit +;;; && --chain_length != 0); +;;; +;;; Here is the inner loop of the function. The function will spend the +;;; majority of its time in this loop, and majority of that time will +;;; be spent in the first ten instructions. +;;; +;;; Within this loop: +;;; ebx = scanend +;;; r8d = curmatch +;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) +;;; esi = windowbestlen - i.e., (window + bestlen) +;;; edi = prev +;;; ebp = limit + +LookupLoop: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry: + + cmp bx,word ptr [rsi + r8 - 1] + jnz LookupLoop1 +LookupLoopIsZero: + cmp r12w, word ptr [r10 + r8] + jnz LookupLoop1 + + +;;; Store the current value of chainlen. + mov [chainlenwmask], edx + +;;; Point edi to the string under scrutiny, and esi to the string we +;;; are hoping to match it up with. In actuality, esi and edi are +;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is +;;; initialized to -(MAX_MATCH_8 - scanalign). + + lea rsi,[r8+r10] + mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8) + lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8] + lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8] + + prefetcht1 [rsi+rdx] + prefetcht1 [rdi+rdx] + + +;;; Test the strings for equality, 8 bytes at a time. At the end, +;;; adjust rdx so that it is offset to the exact byte that mismatched. +;;; +;;; We already know at this point that the first three bytes of the +;;; strings match each other, and they can be safely passed over before +;;; starting the compare loop. So what this code does is skip over 0-3 +;;; bytes, as much as necessary in order to dword-align the edi +;;; pointer. (rsi will still be misaligned three times out of four.) +;;; +;;; It should be confessed that this loop usually does not represent +;;; much of the total running time. Replacing it with a more +;;; straightforward "rep cmpsb" would not drastically degrade +;;; performance. + + +LoopCmps: + mov rax, [rsi + rdx] + xor rax, [rdi + rdx] + jnz LeaveLoopCmps + + mov rax, [rsi + rdx + 8] + xor rax, [rdi + rdx + 8] + jnz LeaveLoopCmps8 + + + mov rax, [rsi + rdx + 8+8] + xor rax, [rdi + rdx + 8+8] + jnz LeaveLoopCmps16 + + add rdx,8+8+8 + + jmp short LoopCmps +LeaveLoopCmps16: add rdx,8 +LeaveLoopCmps8: add rdx,8 +LeaveLoopCmps: + + test eax, 0000FFFFh + jnz LenLower + + test eax,0ffffffffh + + jnz LenLower32 + + add rdx,4 + shr rax,32 + or ax,ax + jnz LenLower + +LenLower32: + shr eax,16 + add rdx,2 +LenLower: sub al, 1 + adc rdx, 0 +;;; Calculate the length of the match. If it is longer than MAX_MATCH, +;;; then automatically accept it as the best possible match and leave. + + lea rax, [rdi + rdx] + sub rax, r9 + cmp eax, MAX_MATCH + jge LenMaximum + +;;; If the length of the match is not longer than the best match we +;;; have so far, then forget it and return to the lookup loop. +;/////////////////////////////////// + + cmp eax, r11d + jg LongerMatch + + lea rsi,[r10+r11] + + mov rdi, prev_ad + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; s->match_start = cur_match; +;;; best_len = len; +;;; if (len >= nice_match) break; +;;; scan_end = *(ushf*)(scan+best_len-1); + +LongerMatch: + mov r11d, eax + mov match_start, r8d + cmp eax, [nicematch] + jge LeaveNow + + lea rsi,[r10+rax] + + movzx ebx, word ptr [r9 + rax - 1] + mov rdi, prev_ad + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; Accept the current string, with the maximum possible length. + +LenMaximum: + mov r11d,MAX_MATCH + mov match_start, r8d + +;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len; +;;; return s->lookahead; + +LeaveNow: +IFDEF INFOZIP + mov eax,r11d +ELSE + mov eax, Lookahead + cmp r11d, eax + cmovng eax, r11d +ENDIF + +;;; Restore the stack and return from whence we came. + + + mov rsi,[save_rsi] + mov rdi,[save_rdi] + mov rbx,[save_rbx] + mov rbp,[save_rbp] + mov r12,[save_r12] + mov r13,[save_r13] +; mov r14,[save_r14] +; mov r15,[save_r15] + + + ret 0 +; please don't remove this string ! +; Your can freely use gvmat64 in any free or commercial app +; but it is far better don't remove the string in the binary! + db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0 +longest_match ENDP + +match_init PROC + ret 0 +match_init ENDP + + +END diff --git a/common/dist/zlib/contrib/masmx64/inffas8664.c b/common/dist/zlib/contrib/masmx64/inffas8664.c new file mode 100644 index 000000000..1b6ef7833 --- /dev/null +++ b/common/dist/zlib/contrib/masmx64/inffas8664.c @@ -0,0 +1,188 @@ +/* $NetBSD: inffas8664.c,v 1.1.1.1 2006/01/14 20:10:55 christos Exp $ */ + +/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding + * version for AMD64 on Windows using Microsoft C compiler + * + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Copyright (C) 2003 Chris Anderson + * Please use the copyright conditions above. + * + * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant + * + * inffas8664.c call function inffas8664fnc in inffasx64.asm + * inffasx64.asm is automatically convert from AMD64 portion of inffas86.c + * + * Dec-29-2003 -- I added AMD64 inflate asm support. This version is also + * slightly quicker on x86 systems because, instead of using rep movsb to copy + * data, it uses rep movsw, which moves data in 2-byte chunks instead of single + * bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates + * from http://fedora.linux.duke.edu/fc1_x86_64 + * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with + * 1GB ram. The 64-bit version is about 4% faster than the 32-bit version, + * when decompressing mozilla-source-1.3.tar.gz. + * + * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from + * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at + * the moment. I have successfully compiled and tested this code with gcc2.96, + * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S + * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX + * enabled. I will attempt to merge the MMX code into this version. Newer + * versions of this and inffast.S can be found at + * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ + * + */ + +#include +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +/* Mark Adler's comments from inffast.c: */ + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ + + + + typedef struct inffast_ar { +/* 64 32 x86 x86_64 */ +/* ar offset register */ +/* 0 0 */ void *esp; /* esp save */ +/* 8 4 */ void *ebp; /* ebp save */ +/* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */ +/* 24 12 */ unsigned char FAR *last; /* r9 while in < last */ +/* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */ +/* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */ +/* 48 24 */ unsigned char FAR *end; /* r10 while out < end */ +/* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */ +/* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */ +/* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */ +/* 80 40 */ size_t /*unsigned long */hold; /* edx rdx local strm->hold */ +/* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */ +/* 92 48 */ unsigned wsize; /* window size */ +/* 96 52 */ unsigned write; /* window write index */ +/*100 56 */ unsigned lmask; /* r12 mask for lcode */ +/*104 60 */ unsigned dmask; /* r13 mask for dcode */ +/*108 64 */ unsigned len; /* r14 match length */ +/*112 68 */ unsigned dist; /* r15 match distance */ +/*116 72 */ unsigned status; /* set when state chng*/ + } type_ar; +#ifdef ASMINF + +void inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + type_ar ar; + void inffas8664fnc(struct inffast_ar * par); + + + +#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64)) +#define PAD_AVAIL_IN 6 +#define PAD_AVAIL_OUT 258 +#else +#define PAD_AVAIL_IN 5 +#define PAD_AVAIL_OUT 257 +#endif + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + + ar.in = strm->next_in; + ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN); + ar.out = strm->next_out; + ar.beg = ar.out - (start - strm->avail_out); + ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT); + ar.wsize = state->wsize; + ar.write = state->write; + ar.window = state->window; + ar.hold = state->hold; + ar.bits = state->bits; + ar.lcode = state->lencode; + ar.dcode = state->distcode; + ar.lmask = (1U << state->lenbits) - 1; + ar.dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + + /* align in on 1/2 hold size boundary */ + while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) { + ar.hold += (unsigned long)*ar.in++ << ar.bits; + ar.bits += 8; + } + + inffas8664fnc(&ar); + + if (ar.status > 1) { + if (ar.status == 2) + strm->msg = "invalid literal/length code"; + else if (ar.status == 3) + strm->msg = "invalid distance code"; + else + strm->msg = "invalid distance too far back"; + state->mode = BAD; + } + else if ( ar.status == 1 ) { + state->mode = TYPE; + } + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + ar.len = ar.bits >> 3; + ar.in -= ar.len; + ar.bits -= ar.len << 3; + ar.hold &= (1U << ar.bits) - 1; + + /* update state and return */ + strm->next_in = ar.in; + strm->next_out = ar.out; + strm->avail_in = (unsigned)(ar.in < ar.last ? + PAD_AVAIL_IN + (ar.last - ar.in) : + PAD_AVAIL_IN - (ar.in - ar.last)); + strm->avail_out = (unsigned)(ar.out < ar.end ? + PAD_AVAIL_OUT + (ar.end - ar.out) : + PAD_AVAIL_OUT - (ar.out - ar.end)); + state->hold = (unsigned long)ar.hold; + state->bits = ar.bits; + return; +} + +#endif diff --git a/common/dist/zlib/contrib/masmx64/inffasx64.asm b/common/dist/zlib/contrib/masmx64/inffasx64.asm new file mode 100644 index 000000000..b5d93a272 --- /dev/null +++ b/common/dist/zlib/contrib/masmx64/inffasx64.asm @@ -0,0 +1,392 @@ +; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding +; version for AMD64 on Windows using Microsoft C compiler +; +; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c +; inffasx64.asm is called by inffas8664.c, which contain more info. + + +; to compile this file, I use option +; ml64.exe /Flinffasx64 /c /Zi inffasx64.asm +; with Microsoft Macro Assembler (x64) for AMD64 +; +; ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK +; +; (you can get Windows 2003 server DDK with ml64 and cl.exe for AMD64 from +; http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price) +; + +.code +inffas8664fnc PROC + +; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and +; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp +; +; All registers must be preserved across the call, except for +; rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch. + + + mov [rsp-8],rsi + mov [rsp-16],rdi + mov [rsp-24],r12 + mov [rsp-32],r13 + mov [rsp-40],r14 + mov [rsp-48],r15 + mov [rsp-56],rbx + + mov rax,rcx + + mov [rax+8], rbp ; /* save regs rbp and rsp */ + mov [rax], rsp + + mov rsp, rax ; /* make rsp point to &ar */ + + mov rsi, [rsp+16] ; /* rsi = in */ + mov rdi, [rsp+32] ; /* rdi = out */ + mov r9, [rsp+24] ; /* r9 = last */ + mov r10, [rsp+48] ; /* r10 = end */ + mov rbp, [rsp+64] ; /* rbp = lcode */ + mov r11, [rsp+72] ; /* r11 = dcode */ + mov rdx, [rsp+80] ; /* rdx = hold */ + mov ebx, [rsp+88] ; /* ebx = bits */ + mov r12d, [rsp+100] ; /* r12d = lmask */ + mov r13d, [rsp+104] ; /* r13d = dmask */ + ; /* r14d = len */ + ; /* r15d = dist */ + + + cld + cmp r10, rdi + je L_one_time ; /* if only one decode left */ + cmp r9, rsi + + jne L_do_loop + + +L_one_time: + mov r8, r12 ; /* r8 = lmask */ + cmp bl, 32 + ja L_get_length_code_one_time + + lodsd ; /* eax = *(uint *)in++ */ + mov cl, bl ; /* cl = bits, needs it for shifting */ + add bl, 32 ; /* bits += 32 */ + shl rax, cl + or rdx, rax ; /* hold |= *((uint *)in)++ << bits */ + jmp L_get_length_code_one_time + +ALIGN 4 +L_while_test: + cmp r10, rdi + jbe L_break_loop + cmp r9, rsi + jbe L_break_loop + +L_do_loop: + mov r8, r12 ; /* r8 = lmask */ + cmp bl, 32 + ja L_get_length_code ; /* if (32 < bits) */ + + lodsd ; /* eax = *(uint *)in++ */ + mov cl, bl ; /* cl = bits, needs it for shifting */ + add bl, 32 ; /* bits += 32 */ + shl rax, cl + or rdx, rax ; /* hold |= *((uint *)in)++ << bits */ + +L_get_length_code: + and r8, rdx ; /* r8 &= hold */ + mov eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */ + + mov cl, ah ; /* cl = this.bits */ + sub bl, ah ; /* bits -= this.bits */ + shr rdx, cl ; /* hold >>= this.bits */ + + test al, al + jnz L_test_for_length_base ; /* if (op != 0) 45.7% */ + + mov r8, r12 ; /* r8 = lmask */ + shr eax, 16 ; /* output this.val char */ + stosb + +L_get_length_code_one_time: + and r8, rdx ; /* r8 &= hold */ + mov eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */ + +L_dolen: + mov cl, ah ; /* cl = this.bits */ + sub bl, ah ; /* bits -= this.bits */ + shr rdx, cl ; /* hold >>= this.bits */ + + test al, al + jnz L_test_for_length_base ; /* if (op != 0) 45.7% */ + + shr eax, 16 ; /* output this.val char */ + stosb + jmp L_while_test + +ALIGN 4 +L_test_for_length_base: + mov r14d, eax ; /* len = this */ + shr r14d, 16 ; /* len = this.val */ + mov cl, al + + test al, 16 + jz L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */ + and cl, 15 ; /* op &= 15 */ + jz L_decode_distance ; /* if (!op) */ + +L_add_bits_to_len: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx ; /* eax &= hold */ + shr rdx, cl + add r14d, eax ; /* len += hold & mask[op] */ + +L_decode_distance: + mov r8, r13 ; /* r8 = dmask */ + cmp bl, 32 + ja L_get_distance_code ; /* if (32 < bits) */ + + lodsd ; /* eax = *(uint *)in++ */ + mov cl, bl ; /* cl = bits, needs it for shifting */ + add bl, 32 ; /* bits += 32 */ + shl rax, cl + or rdx, rax ; /* hold |= *((uint *)in)++ << bits */ + +L_get_distance_code: + and r8, rdx ; /* r8 &= hold */ + mov eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */ + +L_dodist: + mov r15d, eax ; /* dist = this */ + shr r15d, 16 ; /* dist = this.val */ + mov cl, ah + sub bl, ah ; /* bits -= this.bits */ + shr rdx, cl ; /* hold >>= this.bits */ + mov cl, al ; /* cl = this.op */ + + test al, 16 ; /* if ((op & 16) == 0) */ + jz L_test_for_second_level_dist + and cl, 15 ; /* op &= 15 */ + jz L_check_dist_one + +L_add_bits_to_dist: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax ; /* (1 << op) - 1 */ + and eax, edx ; /* eax &= hold */ + shr rdx, cl + add r15d, eax ; /* dist += hold & ((1 << op) - 1) */ + +L_check_window: + mov r8, rsi ; /* save in so from can use it's reg */ + mov rax, rdi + sub rax, [rsp+40] ; /* nbytes = out - beg */ + + cmp eax, r15d + jb L_clip_window ; /* if (dist > nbytes) 4.2% */ + + mov ecx, r14d ; /* ecx = len */ + mov rsi, rdi + sub rsi, r15 ; /* from = out - dist */ + + sar ecx, 1 + jnc L_copy_two ; /* if len % 2 == 0 */ + + rep movsw + mov al, [rsi] + mov [rdi], al + inc rdi + + mov rsi, r8 ; /* move in back to %rsi, toss from */ + jmp L_while_test + +L_copy_two: + rep movsw + mov rsi, r8 ; /* move in back to %rsi, toss from */ + jmp L_while_test + +ALIGN 4 +L_check_dist_one: + cmp r15d, 1 ; /* if dist 1, is a memset */ + jne L_check_window + cmp [rsp+40], rdi ; /* if out == beg, outside window */ + je L_check_window + + mov ecx, r14d ; /* ecx = len */ + mov al, [rdi-1] + mov ah, al + + sar ecx, 1 + jnc L_set_two + mov [rdi], al + inc rdi + +L_set_two: + rep stosw + jmp L_while_test + +ALIGN 4 +L_test_for_second_level_length: + test al, 64 + jnz L_test_for_end_of_block ; /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx ; /* eax &= hold */ + add eax, r14d ; /* eax += len */ + mov eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/ + jmp L_dolen + +ALIGN 4 +L_test_for_second_level_dist: + test al, 64 + jnz L_invalid_distance_code ; /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx ; /* eax &= hold */ + add eax, r15d ; /* eax += dist */ + mov eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/ + jmp L_dodist + +ALIGN 4 +L_clip_window: + mov ecx, eax ; /* ecx = nbytes */ + mov eax, [rsp+92] ; /* eax = wsize, prepare for dist cmp */ + neg ecx ; /* nbytes = -nbytes */ + + cmp eax, r15d + jb L_invalid_distance_too_far ; /* if (dist > wsize) */ + + add ecx, r15d ; /* nbytes = dist - nbytes */ + cmp dword ptr [rsp+96], 0 + jne L_wrap_around_window ; /* if (write != 0) */ + + mov rsi, [rsp+56] ; /* from = window */ + sub eax, ecx ; /* eax -= nbytes */ + add rsi, rax ; /* from += wsize - nbytes */ + + mov eax, r14d ; /* eax = len */ + cmp r14d, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* eax -= nbytes */ + rep movsb + mov rsi, rdi + sub rsi, r15 ; /* from = &out[ -dist ] */ + jmp L_do_copy + +ALIGN 4 +L_wrap_around_window: + mov eax, [rsp+96] ; /* eax = write */ + cmp ecx, eax + jbe L_contiguous_in_window ; /* if (write >= nbytes) */ + + mov esi, [rsp+92] ; /* from = wsize */ + add rsi, [rsp+56] ; /* from += window */ + add rsi, rax ; /* from += write */ + sub rsi, rcx ; /* from -= nbytes */ + sub ecx, eax ; /* nbytes -= write */ + + mov eax, r14d ; /* eax = len */ + cmp eax, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* len -= nbytes */ + rep movsb + mov rsi, [rsp+56] ; /* from = window */ + mov ecx, [rsp+96] ; /* nbytes = write */ + cmp eax, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* len -= nbytes */ + rep movsb + mov rsi, rdi + sub rsi, r15 ; /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_contiguous_in_window: + mov rsi, [rsp+56] ; /* rsi = window */ + add rsi, rax + sub rsi, rcx ; /* from += write - nbytes */ + + mov eax, r14d ; /* eax = len */ + cmp eax, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* len -= nbytes */ + rep movsb + mov rsi, rdi + sub rsi, r15 ; /* from = out - dist */ + jmp L_do_copy ; /* if (nbytes >= len) */ + +ALIGN 4 +L_do_copy: + mov ecx, eax ; /* ecx = len */ + rep movsb + + mov rsi, r8 ; /* move in back to %esi, toss from */ + jmp L_while_test + +L_test_for_end_of_block: + test al, 32 + jz L_invalid_literal_length_code + mov dword ptr [rsp+116], 1 + jmp L_break_loop_with_status + +L_invalid_literal_length_code: + mov dword ptr [rsp+116], 2 + jmp L_break_loop_with_status + +L_invalid_distance_code: + mov dword ptr [rsp+116], 3 + jmp L_break_loop_with_status + +L_invalid_distance_too_far: + mov dword ptr [rsp+116], 4 + jmp L_break_loop_with_status + +L_break_loop: + mov dword ptr [rsp+116], 0 + +L_break_loop_with_status: +; /* put in, out, bits, and hold back into ar and pop esp */ + mov [rsp+16], rsi ; /* in */ + mov [rsp+32], rdi ; /* out */ + mov [rsp+88], ebx ; /* bits */ + mov [rsp+80], rdx ; /* hold */ + + mov rax, [rsp] ; /* restore rbp and rsp */ + mov rbp, [rsp+8] + mov rsp, rax + + + + mov rsi,[rsp-8] + mov rdi,[rsp-16] + mov r12,[rsp-24] + mov r13,[rsp-32] + mov r14,[rsp-40] + mov r15,[rsp-48] + mov rbx,[rsp-56] + + ret 0 +; : +; : "m" (ar) +; : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", +; "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15" +; ); + +inffas8664fnc ENDP +;_TEXT ENDS +END diff --git a/common/dist/zlib/contrib/masmx64/readme.txt b/common/dist/zlib/contrib/masmx64/readme.txt new file mode 100644 index 000000000..ee03115c5 --- /dev/null +++ b/common/dist/zlib/contrib/masmx64/readme.txt @@ -0,0 +1,28 @@ +Summary +------- +This directory contains ASM implementations of the functions +longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t), +for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits. + +gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits + assembly optimized version from Jean-loup Gailly original longest_match function + +inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing + original function from Mark Adler + +Use instructions +---------------- +Copy these files into the zlib source directory. + +define ASMV and ASMINF in your project. Include inffas8664.c in your source tree, +and inffasx64.obj and gvmat64.obj as object to link. + + +Build instructions +------------------ +run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe) + +ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK + +You can get Windows 2003 server DDK with ml64 and cl for AMD64 from + http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price) diff --git a/common/dist/zlib/contrib/masmx86/bld_ml32.bat b/common/dist/zlib/contrib/masmx86/bld_ml32.bat new file mode 100644 index 000000000..99144d07a --- /dev/null +++ b/common/dist/zlib/contrib/masmx86/bld_ml32.bat @@ -0,0 +1,2 @@ +ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm +ml /coff /Zi /c /Flinffas32.lst inffas32.asm diff --git a/common/dist/zlib/contrib/masmx86/gvmat32.asm b/common/dist/zlib/contrib/masmx86/gvmat32.asm new file mode 100644 index 000000000..874bb2d48 --- /dev/null +++ b/common/dist/zlib/contrib/masmx86/gvmat32.asm @@ -0,0 +1,972 @@ +; gvmat32.asm -- Asm portion of the optimized longest_match for 32 bits x86 +; Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant. +; File written by Gilles Vollant, by modifiying the longest_match +; from Jean-loup Gailly in deflate.c +; +; http://www.zlib.net +; http://www.winimage.com/zLibDll +; http://www.muppetlabs.com/~breadbox/software/assembly.html +; +; For Visual C++ 4.x and higher and ML 6.x and higher +; ml.exe is in directory \MASM611C of Win95 DDK +; ml.exe is also distributed in http://www.masm32.com/masmdl.htm +; and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/ +; +; this file contain two implementation of longest_match +; +; longest_match_7fff : written 1996 by Gilles Vollant optimized for +; first Pentium. Assume s->w_mask == 0x7fff +; longest_match_686 : written by Brian raiter (1998), optimized for Pentium Pro +; +; for using an seembly version of longest_match, you need define ASMV in project +; There is two way in using gvmat32.asm +; +; A) Suggested method +; if you want include both longest_match_7fff and longest_match_686 +; compile the asm file running +; ml /coff /Zi /Flgvmat32.lst /c gvmat32.asm +; and include gvmat32c.c in your project +; if you have an old cpu (386,486 or first Pentium) and s->w_mask==0x7fff, +; longest_match_7fff will be used +; if you have a more modern CPU (Pentium Pro, II and higher) +; longest_match_686 will be used +; on old cpu with s->w_mask!=0x7fff, longest_match_686 will be used, +; but this is not a sitation you'll find often +; +; B) Alternative +; if you are not interresed in old cpu performance and want the smaller +; binaries possible +; +; compile the asm file running +; ml /coff /Zi /c /Flgvmat32.lst /DNOOLDPENTIUMCODE gvmat32.asm +; and do not include gvmat32c.c in your project (ou define also +; NOOLDPENTIUMCODE) +; +; note : as I known, longest_match_686 is very faster than longest_match_7fff +; on pentium Pro/II/III, faster (but less) in P4, but it seem +; longest_match_7fff can be faster (very very litte) on AMD Athlon64/K8 +; +; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2 + +;uInt longest_match_7fff(s, cur_match) +; deflate_state *s; +; IPos cur_match; /* current match */ + + NbStack equ 76 + cur_match equ dword ptr[esp+NbStack-0] + str_s equ dword ptr[esp+NbStack-4] +; 5 dword on top (ret,ebp,esi,edi,ebx) + adrret equ dword ptr[esp+NbStack-8] + pushebp equ dword ptr[esp+NbStack-12] + pushedi equ dword ptr[esp+NbStack-16] + pushesi equ dword ptr[esp+NbStack-20] + pushebx equ dword ptr[esp+NbStack-24] + + chain_length equ dword ptr [esp+NbStack-28] + limit equ dword ptr [esp+NbStack-32] + best_len equ dword ptr [esp+NbStack-36] + window equ dword ptr [esp+NbStack-40] + prev equ dword ptr [esp+NbStack-44] + scan_start equ word ptr [esp+NbStack-48] + wmask equ dword ptr [esp+NbStack-52] + match_start_ptr equ dword ptr [esp+NbStack-56] + nice_match equ dword ptr [esp+NbStack-60] + scan equ dword ptr [esp+NbStack-64] + + windowlen equ dword ptr [esp+NbStack-68] + match_start equ dword ptr [esp+NbStack-72] + strend equ dword ptr [esp+NbStack-76] + NbStackAdd equ (NbStack-24) + + .386p + + name gvmatch + .MODEL FLAT + + + +; all the +zlib1222add offsets are due to the addition of fields +; in zlib in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). +; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). +; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). + + zlib1222add equ 8 + +; Note : these value are good with a 8 bytes boundary pack structure + dep_chain_length equ 74h+zlib1222add + dep_window equ 30h+zlib1222add + dep_strstart equ 64h+zlib1222add + dep_prev_length equ 70h+zlib1222add + dep_nice_match equ 88h+zlib1222add + dep_w_size equ 24h+zlib1222add + dep_prev equ 38h+zlib1222add + dep_w_mask equ 2ch+zlib1222add + dep_good_match equ 84h+zlib1222add + dep_match_start equ 68h+zlib1222add + dep_lookahead equ 6ch+zlib1222add + + +_TEXT segment + +IFDEF NOUNDERLINE + IFDEF NOOLDPENTIUMCODE + public longest_match + public match_init + ELSE + public longest_match_7fff + public cpudetect32 + public longest_match_686 + ENDIF +ELSE + IFDEF NOOLDPENTIUMCODE + public _longest_match + public _match_init + ELSE + public _longest_match_7fff + public _cpudetect32 + public _longest_match_686 + ENDIF +ENDIF + + MAX_MATCH equ 258 + MIN_MATCH equ 3 + MIN_LOOKAHEAD equ (MAX_MATCH+MIN_MATCH+1) + + + +IFNDEF NOOLDPENTIUMCODE +IFDEF NOUNDERLINE +longest_match_7fff proc near +ELSE +_longest_match_7fff proc near +ENDIF + + mov edx,[esp+4] + + + + push ebp + push edi + push esi + push ebx + + sub esp,NbStackAdd + +; initialize or check the variables used in match.asm. + mov ebp,edx + +; chain_length = s->max_chain_length +; if (prev_length>=good_match) chain_length >>= 2 + mov edx,[ebp+dep_chain_length] + mov ebx,[ebp+dep_prev_length] + cmp [ebp+dep_good_match],ebx + ja noshr + shr edx,2 +noshr: +; we increment chain_length because in the asm, the --chain_lenght is in the beginning of the loop + inc edx + mov edi,[ebp+dep_nice_match] + mov chain_length,edx + mov eax,[ebp+dep_lookahead] + cmp eax,edi +; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + jae nolookaheadnicematch + mov edi,eax +nolookaheadnicematch: +; best_len = s->prev_length + mov best_len,ebx + +; window = s->window + mov esi,[ebp+dep_window] + mov ecx,[ebp+dep_strstart] + mov window,esi + + mov nice_match,edi +; scan = window + strstart + add esi,ecx + mov scan,esi +; dx = *window + mov dx,word ptr [esi] +; bx = *(window+best_len-1) + mov bx,word ptr [esi+ebx-1] + add esi,MAX_MATCH-1 +; scan_start = *scan + mov scan_start,dx +; strend = scan + MAX_MATCH-1 + mov strend,esi +; bx = scan_end = *(window+best_len-1) + +; IPos limit = s->strstart > (IPos)MAX_DIST(s) ? +; s->strstart - (IPos)MAX_DIST(s) : NIL; + + mov esi,[ebp+dep_w_size] + sub esi,MIN_LOOKAHEAD +; here esi = MAX_DIST(s) + sub ecx,esi + ja nodist + xor ecx,ecx +nodist: + mov limit,ecx + +; prev = s->prev + mov edx,[ebp+dep_prev] + mov prev,edx + +; + mov edx,dword ptr [ebp+dep_match_start] + mov bp,scan_start + mov eax,cur_match + mov match_start,edx + + mov edx,window + mov edi,edx + add edi,best_len + mov esi,prev + dec edi +; windowlen = window + best_len -1 + mov windowlen,edi + + jmp beginloop2 + align 4 + +; here, in the loop +; eax = ax = cur_match +; ecx = limit +; bx = scan_end +; bp = scan_start +; edi = windowlen (window + best_len -1) +; esi = prev + + +;// here; chain_length <=16 +normalbeg0add16: + add chain_length,16 + jz exitloop +normalbeg0: + cmp word ptr[edi+eax],bx + je normalbeg2noroll +rcontlabnoroll: +; cur_match = prev[cur_match & wmask] + and eax,7fffh + mov ax,word ptr[esi+eax*2] +; if cur_match > limit, go to exitloop + cmp ecx,eax + jnb exitloop +; if --chain_length != 0, go to exitloop + dec chain_length + jnz normalbeg0 + jmp exitloop + +normalbeg2noroll: +; if (scan_start==*(cur_match+window)) goto normalbeg2 + cmp bp,word ptr[edx+eax] + jne rcontlabnoroll + jmp normalbeg2 + +contloop3: + mov edi,windowlen + +; cur_match = prev[cur_match & wmask] + and eax,7fffh + mov ax,word ptr[esi+eax*2] +; if cur_match > limit, go to exitloop + cmp ecx,eax +jnbexitloopshort1: + jnb exitloop +; if --chain_length != 0, go to exitloop + + +; begin the main loop +beginloop2: + sub chain_length,16+1 +; if chain_length <=16, don't use the unrolled loop + jna normalbeg0add16 + +do16: + cmp word ptr[edi+eax],bx + je normalbeg2dc0 + +maccn MACRO lab + and eax,7fffh + mov ax,word ptr[esi+eax*2] + cmp ecx,eax + jnb exitloop + cmp word ptr[edi+eax],bx + je lab + ENDM + +rcontloop0: + maccn normalbeg2dc1 + +rcontloop1: + maccn normalbeg2dc2 + +rcontloop2: + maccn normalbeg2dc3 + +rcontloop3: + maccn normalbeg2dc4 + +rcontloop4: + maccn normalbeg2dc5 + +rcontloop5: + maccn normalbeg2dc6 + +rcontloop6: + maccn normalbeg2dc7 + +rcontloop7: + maccn normalbeg2dc8 + +rcontloop8: + maccn normalbeg2dc9 + +rcontloop9: + maccn normalbeg2dc10 + +rcontloop10: + maccn short normalbeg2dc11 + +rcontloop11: + maccn short normalbeg2dc12 + +rcontloop12: + maccn short normalbeg2dc13 + +rcontloop13: + maccn short normalbeg2dc14 + +rcontloop14: + maccn short normalbeg2dc15 + +rcontloop15: + and eax,7fffh + mov ax,word ptr[esi+eax*2] + cmp ecx,eax + jnb exitloop + + sub chain_length,16 + ja do16 + jmp normalbeg0add16 + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +normbeg MACRO rcontlab,valsub +; if we are here, we know that *(match+best_len-1) == scan_end + cmp bp,word ptr[edx+eax] +; if (match != scan_start) goto rcontlab + jne rcontlab +; calculate the good chain_length, and we'll compare scan and match string + add chain_length,16-valsub + jmp iseq + ENDM + + +normalbeg2dc11: + normbeg rcontloop11,11 + +normalbeg2dc12: + normbeg short rcontloop12,12 + +normalbeg2dc13: + normbeg short rcontloop13,13 + +normalbeg2dc14: + normbeg short rcontloop14,14 + +normalbeg2dc15: + normbeg short rcontloop15,15 + +normalbeg2dc10: + normbeg rcontloop10,10 + +normalbeg2dc9: + normbeg rcontloop9,9 + +normalbeg2dc8: + normbeg rcontloop8,8 + +normalbeg2dc7: + normbeg rcontloop7,7 + +normalbeg2dc6: + normbeg rcontloop6,6 + +normalbeg2dc5: + normbeg rcontloop5,5 + +normalbeg2dc4: + normbeg rcontloop4,4 + +normalbeg2dc3: + normbeg rcontloop3,3 + +normalbeg2dc2: + normbeg rcontloop2,2 + +normalbeg2dc1: + normbeg rcontloop1,1 + +normalbeg2dc0: + normbeg rcontloop0,0 + + +; we go in normalbeg2 because *(ushf*)(match+best_len-1) == scan_end + +normalbeg2: + mov edi,window + + cmp bp,word ptr[edi+eax] + jne contloop3 ; if *(ushf*)match != scan_start, continue + +iseq: +; if we are here, we know that *(match+best_len-1) == scan_end +; and (match == scan_start) + + mov edi,edx + mov esi,scan ; esi = scan + add edi,eax ; edi = window + cur_match = match + + mov edx,[esi+3] ; compare manually dword at match+3 + xor edx,[edi+3] ; and scan +3 + + jz begincompare ; if equal, go to long compare + +; we will determine the unmatch byte and calculate len (in esi) + or dl,dl + je eq1rr + mov esi,3 + jmp trfinval +eq1rr: + or dx,dx + je eq1 + + mov esi,4 + jmp trfinval +eq1: + and edx,0ffffffh + jz eq11 + mov esi,5 + jmp trfinval +eq11: + mov esi,6 + jmp trfinval + +begincompare: + ; here we now scan and match begin same + add edi,6 + add esi,6 + mov ecx,(MAX_MATCH-(2+4))/4 ; scan for at most MAX_MATCH bytes + repe cmpsd ; loop until mismatch + + je trfin ; go to trfin if not unmatch +; we determine the unmatch byte + sub esi,4 + mov edx,[edi-4] + xor edx,[esi] + + or dl,dl + jnz trfin + inc esi + + or dx,dx + jnz trfin + inc esi + + and edx,0ffffffh + jnz trfin + inc esi + +trfin: + sub esi,scan ; esi = len +trfinval: +; here we have finised compare, and esi contain len of equal string + cmp esi,best_len ; if len > best_len, go newbestlen + ja short newbestlen +; now we restore edx, ecx and esi, for the big loop + mov esi,prev + mov ecx,limit + mov edx,window + jmp contloop3 + +newbestlen: + mov best_len,esi ; len become best_len + + mov match_start,eax ; save new position as match_start + cmp esi,nice_match ; if best_len >= nice_match, exit + jae exitloop + mov ecx,scan + mov edx,window ; restore edx=window + add ecx,esi + add esi,edx + + dec esi + mov windowlen,esi ; windowlen = window + best_len-1 + mov bx,[ecx-1] ; bx = *(scan+best_len-1) = scan_end + +; now we restore ecx and esi, for the big loop : + mov esi,prev + mov ecx,limit + jmp contloop3 + +exitloop: +; exit : s->match_start=match_start + mov ebx,match_start + mov ebp,str_s + mov ecx,best_len + mov dword ptr [ebp+dep_match_start],ebx + mov eax,dword ptr [ebp+dep_lookahead] + cmp ecx,eax + ja minexlo + mov eax,ecx +minexlo: +; return min(best_len,s->lookahead) + +; restore stack and register ebx,esi,edi,ebp + add esp,NbStackAdd + + pop ebx + pop esi + pop edi + pop ebp + ret +InfoAuthor: +; please don't remove this string ! +; Your are free use gvmat32 in any fre or commercial apps if you don't remove the string in the binary! + db 0dh,0ah,"GVMat32 optimised assembly code written 1996-98 by Gilles Vollant",0dh,0ah + + + +IFDEF NOUNDERLINE +longest_match_7fff endp +ELSE +_longest_match_7fff endp +ENDIF + + +IFDEF NOUNDERLINE +cpudetect32 proc near +ELSE +_cpudetect32 proc near +ENDIF + + push ebx + + pushfd ; push original EFLAGS + pop eax ; get original EFLAGS + mov ecx, eax ; save original EFLAGS + xor eax, 40000h ; flip AC bit in EFLAGS + push eax ; save new EFLAGS value on stack + popfd ; replace current EFLAGS value + pushfd ; get new EFLAGS + pop eax ; store new EFLAGS in EAX + xor eax, ecx ; can’t toggle AC bit, processor=80386 + jz end_cpu_is_386 ; jump if 80386 processor + push ecx + popfd ; restore AC bit in EFLAGS first + + pushfd + pushfd + pop ecx + + mov eax, ecx ; get original EFLAGS + xor eax, 200000h ; flip ID bit in EFLAGS + push eax ; save new EFLAGS value on stack + popfd ; replace current EFLAGS value + pushfd ; get new EFLAGS + pop eax ; store new EFLAGS in EAX + popfd ; restore original EFLAGS + xor eax, ecx ; can’t toggle ID bit, + je is_old_486 ; processor=old + + mov eax,1 + db 0fh,0a2h ;CPUID + +exitcpudetect: + pop ebx + ret + +end_cpu_is_386: + mov eax,0300h + jmp exitcpudetect + +is_old_486: + mov eax,0400h + jmp exitcpudetect + +IFDEF NOUNDERLINE +cpudetect32 endp +ELSE +_cpudetect32 endp +ENDIF +ENDIF + +MAX_MATCH equ 258 +MIN_MATCH equ 3 +MIN_LOOKAHEAD equ (MAX_MATCH + MIN_MATCH + 1) +MAX_MATCH_8_ equ ((MAX_MATCH + 7) AND 0FFF0h) + + +;;; stack frame offsets + +chainlenwmask equ esp + 0 ; high word: current chain len + ; low word: s->wmask +window equ esp + 4 ; local copy of s->window +windowbestlen equ esp + 8 ; s->window + bestlen +scanstart equ esp + 16 ; first two bytes of string +scanend equ esp + 12 ; last two bytes of string +scanalign equ esp + 20 ; dword-misalignment of string +nicematch equ esp + 24 ; a good enough match size +bestlen equ esp + 28 ; size of best match so far +scan equ esp + 32 ; ptr to string wanting match + +LocalVarsSize equ 36 +; saved ebx byte esp + 36 +; saved edi byte esp + 40 +; saved esi byte esp + 44 +; saved ebp byte esp + 48 +; return address byte esp + 52 +deflatestate equ esp + 56 ; the function arguments +curmatch equ esp + 60 + +;;; Offsets for fields in the deflate_state structure. These numbers +;;; are calculated from the definition of deflate_state, with the +;;; assumption that the compiler will dword-align the fields. (Thus, +;;; changing the definition of deflate_state could easily cause this +;;; program to crash horribly, without so much as a warning at +;;; compile time. Sigh.) + +dsWSize equ 36+zlib1222add +dsWMask equ 44+zlib1222add +dsWindow equ 48+zlib1222add +dsPrev equ 56+zlib1222add +dsMatchLen equ 88+zlib1222add +dsPrevMatch equ 92+zlib1222add +dsStrStart equ 100+zlib1222add +dsMatchStart equ 104+zlib1222add +dsLookahead equ 108+zlib1222add +dsPrevLen equ 112+zlib1222add +dsMaxChainLen equ 116+zlib1222add +dsGoodMatch equ 132+zlib1222add +dsNiceMatch equ 136+zlib1222add + + +;;; match.asm -- Pentium-Pro-optimized version of longest_match() +;;; Written for zlib 1.1.2 +;;; Copyright (C) 1998 Brian Raiter +;;; You can look at http://www.muppetlabs.com/~breadbox/software/assembly.html +;;; +;;; This is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License. + +;GLOBAL _longest_match, _match_init + + +;SECTION .text + +;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch) + +;_longest_match: +IFDEF NOOLDPENTIUMCODE + IFDEF NOUNDERLINE + longest_match proc near + ELSE + _longest_match proc near + ENDIF +ELSE + IFDEF NOUNDERLINE + longest_match_686 proc near + ELSE + _longest_match_686 proc near + ENDIF +ENDIF + +;;; Save registers that the compiler may be using, and adjust esp to +;;; make room for our stack frame. + + push ebp + push edi + push esi + push ebx + sub esp, LocalVarsSize + +;;; Retrieve the function arguments. ecx will hold cur_match +;;; throughout the entire function. edx will hold the pointer to the +;;; deflate_state structure during the function's setup (before +;;; entering the main loop. + + mov edx, [deflatestate] + mov ecx, [curmatch] + +;;; uInt wmask = s->w_mask; +;;; unsigned chain_length = s->max_chain_length; +;;; if (s->prev_length >= s->good_match) { +;;; chain_length >>= 2; +;;; } + + mov eax, [edx + dsPrevLen] + mov ebx, [edx + dsGoodMatch] + cmp eax, ebx + mov eax, [edx + dsWMask] + mov ebx, [edx + dsMaxChainLen] + jl LastMatchGood + shr ebx, 2 +LastMatchGood: + +;;; chainlen is decremented once beforehand so that the function can +;;; use the sign flag instead of the zero flag for the exit test. +;;; It is then shifted into the high word, to make room for the wmask +;;; value, which it will always accompany. + + dec ebx + shl ebx, 16 + or ebx, eax + mov [chainlenwmask], ebx + +;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + + mov eax, [edx + dsNiceMatch] + mov ebx, [edx + dsLookahead] + cmp ebx, eax + jl LookaheadLess + mov ebx, eax +LookaheadLess: mov [nicematch], ebx + +;;; register Bytef *scan = s->window + s->strstart; + + mov esi, [edx + dsWindow] + mov [window], esi + mov ebp, [edx + dsStrStart] + lea edi, [esi + ebp] + mov [scan], edi + +;;; Determine how many bytes the scan ptr is off from being +;;; dword-aligned. + + mov eax, edi + neg eax + and eax, 3 + mov [scanalign], eax + +;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ? +;;; s->strstart - (IPos)MAX_DIST(s) : NIL; + + mov eax, [edx + dsWSize] + sub eax, MIN_LOOKAHEAD + sub ebp, eax + jg LimitPositive + xor ebp, ebp +LimitPositive: + +;;; int best_len = s->prev_length; + + mov eax, [edx + dsPrevLen] + mov [bestlen], eax + +;;; Store the sum of s->window + best_len in esi locally, and in esi. + + add esi, eax + mov [windowbestlen], esi + +;;; register ush scan_start = *(ushf*)scan; +;;; register ush scan_end = *(ushf*)(scan+best_len-1); +;;; Posf *prev = s->prev; + + movzx ebx, word ptr [edi] + mov [scanstart], ebx + movzx ebx, word ptr [edi + eax - 1] + mov [scanend], ebx + mov edi, [edx + dsPrev] + +;;; Jump into the main loop. + + mov edx, [chainlenwmask] + jmp short LoopEntry + +align 4 + +;;; do { +;;; match = s->window + cur_match; +;;; if (*(ushf*)(match+best_len-1) != scan_end || +;;; *(ushf*)match != scan_start) continue; +;;; [...] +;;; } while ((cur_match = prev[cur_match & wmask]) > limit +;;; && --chain_length != 0); +;;; +;;; Here is the inner loop of the function. The function will spend the +;;; majority of its time in this loop, and majority of that time will +;;; be spent in the first ten instructions. +;;; +;;; Within this loop: +;;; ebx = scanend +;;; ecx = curmatch +;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) +;;; esi = windowbestlen - i.e., (window + bestlen) +;;; edi = prev +;;; ebp = limit + +LookupLoop: + and ecx, edx + movzx ecx, word ptr [edi + ecx*2] + cmp ecx, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow +LoopEntry: movzx eax, word ptr [esi + ecx - 1] + cmp eax, ebx + jnz LookupLoop + mov eax, [window] + movzx eax, word ptr [eax + ecx] + cmp eax, [scanstart] + jnz LookupLoop + +;;; Store the current value of chainlen. + + mov [chainlenwmask], edx + +;;; Point edi to the string under scrutiny, and esi to the string we +;;; are hoping to match it up with. In actuality, esi and edi are +;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is +;;; initialized to -(MAX_MATCH_8 - scanalign). + + mov esi, [window] + mov edi, [scan] + add esi, ecx + mov eax, [scanalign] + mov edx, 0fffffef8h; -(MAX_MATCH_8) + lea edi, [edi + eax + 0108h] ;MAX_MATCH_8] + lea esi, [esi + eax + 0108h] ;MAX_MATCH_8] + +;;; Test the strings for equality, 8 bytes at a time. At the end, +;;; adjust edx so that it is offset to the exact byte that mismatched. +;;; +;;; We already know at this point that the first three bytes of the +;;; strings match each other, and they can be safely passed over before +;;; starting the compare loop. So what this code does is skip over 0-3 +;;; bytes, as much as necessary in order to dword-align the edi +;;; pointer. (esi will still be misaligned three times out of four.) +;;; +;;; It should be confessed that this loop usually does not represent +;;; much of the total running time. Replacing it with a more +;;; straightforward "rep cmpsb" would not drastically degrade +;;; performance. + +LoopCmps: + mov eax, [esi + edx] + xor eax, [edi + edx] + jnz LeaveLoopCmps + mov eax, [esi + edx + 4] + xor eax, [edi + edx + 4] + jnz LeaveLoopCmps4 + add edx, 8 + jnz LoopCmps + jmp short LenMaximum +LeaveLoopCmps4: add edx, 4 +LeaveLoopCmps: test eax, 0000FFFFh + jnz LenLower + add edx, 2 + shr eax, 16 +LenLower: sub al, 1 + adc edx, 0 + +;;; Calculate the length of the match. If it is longer than MAX_MATCH, +;;; then automatically accept it as the best possible match and leave. + + lea eax, [edi + edx] + mov edi, [scan] + sub eax, edi + cmp eax, MAX_MATCH + jge LenMaximum + +;;; If the length of the match is not longer than the best match we +;;; have so far, then forget it and return to the lookup loop. + + mov edx, [deflatestate] + mov ebx, [bestlen] + cmp eax, ebx + jg LongerMatch + mov esi, [windowbestlen] + mov edi, [edx + dsPrev] + mov ebx, [scanend] + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; s->match_start = cur_match; +;;; best_len = len; +;;; if (len >= nice_match) break; +;;; scan_end = *(ushf*)(scan+best_len-1); + +LongerMatch: mov ebx, [nicematch] + mov [bestlen], eax + mov [edx + dsMatchStart], ecx + cmp eax, ebx + jge LeaveNow + mov esi, [window] + add esi, eax + mov [windowbestlen], esi + movzx ebx, word ptr [edi + eax - 1] + mov edi, [edx + dsPrev] + mov [scanend], ebx + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; Accept the current string, with the maximum possible length. + +LenMaximum: mov edx, [deflatestate] + mov dword ptr [bestlen], MAX_MATCH + mov [edx + dsMatchStart], ecx + +;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len; +;;; return s->lookahead; + +LeaveNow: + mov edx, [deflatestate] + mov ebx, [bestlen] + mov eax, [edx + dsLookahead] + cmp ebx, eax + jg LookaheadRet + mov eax, ebx +LookaheadRet: + +;;; Restore the stack and return from whence we came. + + add esp, LocalVarsSize + pop ebx + pop esi + pop edi + pop ebp + + ret +; please don't remove this string ! +; Your can freely use gvmat32 in any free or commercial app if you don't remove the string in the binary! + db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah + + +IFDEF NOOLDPENTIUMCODE + IFDEF NOUNDERLINE + longest_match endp + ELSE + _longest_match endp + ENDIF + + IFDEF NOUNDERLINE + match_init proc near + ret + match_init endp + ELSE + _match_init proc near + ret + _match_init endp + ENDIF +ELSE + IFDEF NOUNDERLINE + longest_match_686 endp + ELSE + _longest_match_686 endp + ENDIF +ENDIF + +_TEXT ends +end diff --git a/common/dist/zlib/contrib/masmx86/gvmat32c.c b/common/dist/zlib/contrib/masmx86/gvmat32c.c new file mode 100644 index 000000000..00801e217 --- /dev/null +++ b/common/dist/zlib/contrib/masmx86/gvmat32c.c @@ -0,0 +1,64 @@ +/* $NetBSD: gvmat32c.c,v 1.1.1.1 2006/01/14 20:10:56 christos Exp $ */ + +/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86 + * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant. + * File written by Gilles Vollant, by modifiying the longest_match + * from Jean-loup Gailly in deflate.c + * it prepare all parameters and call the assembly longest_match_gvasm + * longest_match execute standard C code is wmask != 0x7fff + * (assembly code is faster with a fixed wmask) + * + * Read comment at beginning of gvmat32.asm for more information + */ + +#if defined(ASMV) && (!defined(NOOLDPENTIUMCODE)) +#include "deflate.h" + +/* if your C compiler don't add underline before function name, + define ADD_UNDERLINE_ASMFUNC */ +#ifdef ADD_UNDERLINE_ASMFUNC +#define longest_match_7fff _longest_match_7fff +#define longest_match_686 _longest_match_686 +#define cpudetect32 _cpudetect32 +#endif + + +unsigned long cpudetect32(); + +uInt longest_match_c( + deflate_state *s, + IPos cur_match); /* current match */ + + +uInt longest_match_7fff( + deflate_state *s, + IPos cur_match); /* current match */ + +uInt longest_match_686( + deflate_state *s, + IPos cur_match); /* current match */ + + +static uInt iIsPPro=2; + +void match_init () +{ + iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0; +} + +uInt longest_match( + deflate_state *s, + IPos cur_match) /* current match */ +{ + if (iIsPPro!=0) + return longest_match_686(s,cur_match); + + if (s->w_mask != 0x7fff) + return longest_match_686(s,cur_match); + + /* now ((s->w_mask == 0x7fff) && (iIsPPro==0)) */ + return longest_match_7fff(s,cur_match); +} + + +#endif /* defined(ASMV) && (!defined(NOOLDPENTIUMCODE)) */ diff --git a/common/dist/zlib/contrib/masmx86/inffas32.asm b/common/dist/zlib/contrib/masmx86/inffas32.asm new file mode 100644 index 000000000..4a205125e --- /dev/null +++ b/common/dist/zlib/contrib/masmx86/inffas32.asm @@ -0,0 +1,1083 @@ +;/* inffas32.asm is a hand tuned assembler version of inffast.c -- fast decoding +; * +; * inffas32.asm is derivated from inffas86.c, with translation of assembly code +; * +; * Copyright (C) 1995-2003 Mark Adler +; * For conditions of distribution and use, see copyright notice in zlib.h +; * +; * Copyright (C) 2003 Chris Anderson +; * Please use the copyright conditions above. +; * +; * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from +; * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at +; * the moment. I have successfully compiled and tested this code with gcc2.96, +; * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S +; * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX +; * enabled. I will attempt to merge the MMX code into this version. Newer +; * versions of this and inffast.S can be found at +; * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ +; * +; * 2005 : modification by Gilles Vollant +; */ +; For Visual C++ 4.x and higher and ML 6.x and higher +; ml.exe is in directory \MASM611C of Win95 DDK +; ml.exe is also distributed in http://www.masm32.com/masmdl.htm +; and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/ +; +; +; compile with command line option +; ml /coff /Zi /c /Flinffas32.lst inffas32.asm + +; if you define NO_GZIP (see inflate.h), compile with +; ml /coff /Zi /c /Flinffas32.lst /DNO_GUNZIP inffas32.asm + + +; zlib122sup is 0 fort zlib 1.2.2.1 and lower +; zlib122sup is 8 fort zlib 1.2.2.2 and more (with addition of dmax and head +; in inflate_state in inflate.h) +zlib1222sup equ 8 + + +IFDEF GUNZIP + INFLATE_MODE_TYPE equ 11 + INFLATE_MODE_BAD equ 26 +ELSE + IFNDEF NO_GUNZIP + INFLATE_MODE_TYPE equ 11 + INFLATE_MODE_BAD equ 26 + ELSE + INFLATE_MODE_TYPE equ 3 + INFLATE_MODE_BAD equ 17 + ENDIF +ENDIF + + +; 75 "inffast.S" +;FILE "inffast.S" + +;;;GLOBAL _inflate_fast + +;;;SECTION .text + + + + .586p + .mmx + + name inflate_fast_x86 + .MODEL FLAT + +_DATA segment +inflate_fast_use_mmx: + dd 1 + + +_TEXT segment +PUBLIC _inflate_fast + +ALIGN 4 +_inflate_fast: + jmp inflate_fast_entry + + + +ALIGN 4 + db 'Fast decoding Code from Chris Anderson' + db 0 + +ALIGN 4 +invalid_literal_length_code_msg: + db 'invalid literal/length code' + db 0 + +ALIGN 4 +invalid_distance_code_msg: + db 'invalid distance code' + db 0 + +ALIGN 4 +invalid_distance_too_far_msg: + db 'invalid distance too far back' + db 0 + + +ALIGN 4 +inflate_fast_mask: +dd 0 +dd 1 +dd 3 +dd 7 +dd 15 +dd 31 +dd 63 +dd 127 +dd 255 +dd 511 +dd 1023 +dd 2047 +dd 4095 +dd 8191 +dd 16383 +dd 32767 +dd 65535 +dd 131071 +dd 262143 +dd 524287 +dd 1048575 +dd 2097151 +dd 4194303 +dd 8388607 +dd 16777215 +dd 33554431 +dd 67108863 +dd 134217727 +dd 268435455 +dd 536870911 +dd 1073741823 +dd 2147483647 +dd 4294967295 + + +mode_state equ 0 ;/* state->mode */ +wsize_state equ (32+zlib1222sup) ;/* state->wsize */ +write_state equ (36+4+zlib1222sup) ;/* state->write */ +window_state equ (40+4+zlib1222sup) ;/* state->window */ +hold_state equ (44+4+zlib1222sup) ;/* state->hold */ +bits_state equ (48+4+zlib1222sup) ;/* state->bits */ +lencode_state equ (64+4+zlib1222sup) ;/* state->lencode */ +distcode_state equ (68+4+zlib1222sup) ;/* state->distcode */ +lenbits_state equ (72+4+zlib1222sup) ;/* state->lenbits */ +distbits_state equ (76+4+zlib1222sup) ;/* state->distbits */ + + +;;SECTION .text +; 205 "inffast.S" +;GLOBAL inflate_fast_use_mmx + +;SECTION .data + + +; GLOBAL inflate_fast_use_mmx:object +;.size inflate_fast_use_mmx, 4 +; 226 "inffast.S" +;SECTION .text + +ALIGN 4 +inflate_fast_entry: + push edi + push esi + push ebp + push ebx + pushfd + sub esp,64 + cld + + + + + mov esi, [esp+88] + mov edi, [esi+28] + + + + + + + + mov edx, [esi+4] + mov eax, [esi+0] + + add edx,eax + sub edx,11 + + mov [esp+44],eax + mov [esp+20],edx + + mov ebp, [esp+92] + mov ecx, [esi+16] + mov ebx, [esi+12] + + sub ebp,ecx + neg ebp + add ebp,ebx + + sub ecx,257 + add ecx,ebx + + mov [esp+60],ebx + mov [esp+40],ebp + mov [esp+16],ecx +; 285 "inffast.S" + mov eax, [edi+lencode_state] + mov ecx, [edi+distcode_state] + + mov [esp+8],eax + mov [esp+12],ecx + + mov eax,1 + mov ecx, [edi+lenbits_state] + shl eax,cl + dec eax + mov [esp+0],eax + + mov eax,1 + mov ecx, [edi+distbits_state] + shl eax,cl + dec eax + mov [esp+4],eax + + mov eax, [edi+wsize_state] + mov ecx, [edi+write_state] + mov edx, [edi+window_state] + + mov [esp+52],eax + mov [esp+48],ecx + mov [esp+56],edx + + mov ebp, [edi+hold_state] + mov ebx, [edi+bits_state] +; 321 "inffast.S" + mov esi, [esp+44] + mov ecx, [esp+20] + cmp ecx,esi + ja L_align_long + + add ecx,11 + sub ecx,esi + mov eax,12 + sub eax,ecx + lea edi, [esp+28] + rep movsb + mov ecx,eax + xor eax,eax + rep stosb + lea esi, [esp+28] + mov [esp+20],esi + jmp L_is_aligned + + +L_align_long: + test esi,3 + jz L_is_aligned + xor eax,eax + mov al, [esi] + inc esi + mov ecx,ebx + add ebx,8 + shl eax,cl + or ebp,eax + jmp L_align_long + +L_is_aligned: + mov edi, [esp+60] +; 366 "inffast.S" +L_check_mmx: + cmp dword ptr [inflate_fast_use_mmx],2 + je L_init_mmx + ja L_do_loop + + push eax + push ebx + push ecx + push edx + pushfd + mov eax, [esp] + xor dword ptr [esp],0200000h + + + + + popfd + pushfd + pop edx + xor edx,eax + jz L_dont_use_mmx + xor eax,eax + cpuid + cmp ebx,0756e6547h + jne L_dont_use_mmx + cmp ecx,06c65746eh + jne L_dont_use_mmx + cmp edx,049656e69h + jne L_dont_use_mmx + mov eax,1 + cpuid + shr eax,8 + and eax,15 + cmp eax,6 + jne L_dont_use_mmx + test edx,0800000h + jnz L_use_mmx + jmp L_dont_use_mmx +L_use_mmx: + mov dword ptr [inflate_fast_use_mmx],2 + jmp L_check_mmx_pop +L_dont_use_mmx: + mov dword ptr [inflate_fast_use_mmx],3 +L_check_mmx_pop: + pop edx + pop ecx + pop ebx + pop eax + jmp L_check_mmx +; 426 "inffast.S" +ALIGN 4 +L_do_loop: +; 437 "inffast.S" + cmp bl,15 + ja L_get_length_code + + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + +L_get_length_code: + mov edx, [esp+0] + mov ecx, [esp+8] + and edx,ebp + mov eax, [ecx+edx*4] + +L_dolen: + + + + + + + mov cl,ah + sub bl,ah + shr ebp,cl + + + + + + + test al,al + jnz L_test_for_length_base + + shr eax,16 + stosb + +L_while_test: + + + cmp [esp+16],edi + jbe L_break_loop + + cmp [esp+20],esi + ja L_do_loop + jmp L_break_loop + +L_test_for_length_base: +; 502 "inffast.S" + mov edx,eax + shr edx,16 + mov cl,al + + test al,16 + jz L_test_for_second_level_length + and cl,15 + jz L_save_len + cmp bl,cl + jae L_add_bits_to_len + + mov ch,cl + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + mov cl,ch + +L_add_bits_to_len: + mov eax,1 + shl eax,cl + dec eax + sub bl,cl + and eax,ebp + shr ebp,cl + add edx,eax + +L_save_len: + mov [esp+24],edx + + +L_decode_distance: +; 549 "inffast.S" + cmp bl,15 + ja L_get_distance_code + + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + +L_get_distance_code: + mov edx, [esp+4] + mov ecx, [esp+12] + and edx,ebp + mov eax, [ecx+edx*4] + + +L_dodist: + mov edx,eax + shr edx,16 + mov cl,ah + sub bl,ah + shr ebp,cl +; 584 "inffast.S" + mov cl,al + + test al,16 + jz L_test_for_second_level_dist + and cl,15 + jz L_check_dist_one + cmp bl,cl + jae L_add_bits_to_dist + + mov ch,cl + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + mov cl,ch + +L_add_bits_to_dist: + mov eax,1 + shl eax,cl + dec eax + sub bl,cl + and eax,ebp + shr ebp,cl + add edx,eax + jmp L_check_window + +L_check_window: +; 625 "inffast.S" + mov [esp+44],esi + mov eax,edi + sub eax, [esp+40] + + cmp eax,edx + jb L_clip_window + + mov ecx, [esp+24] + mov esi,edi + sub esi,edx + + sub ecx,3 + mov al, [esi] + mov [edi],al + mov al, [esi+1] + mov dl, [esi+2] + add esi,3 + mov [edi+1],al + mov [edi+2],dl + add edi,3 + rep movsb + + mov esi, [esp+44] + jmp L_while_test + +ALIGN 4 +L_check_dist_one: + cmp edx,1 + jne L_check_window + cmp [esp+40],edi + je L_check_window + + dec edi + mov ecx, [esp+24] + mov al, [edi] + sub ecx,3 + + mov [edi+1],al + mov [edi+2],al + mov [edi+3],al + add edi,4 + rep stosb + + jmp L_while_test + +ALIGN 4 +L_test_for_second_level_length: + + + + + test al,64 + jnz L_test_for_end_of_block + + mov eax,1 + shl eax,cl + dec eax + and eax,ebp + add eax,edx + mov edx, [esp+8] + mov eax, [edx+eax*4] + jmp L_dolen + +ALIGN 4 +L_test_for_second_level_dist: + + + + + test al,64 + jnz L_invalid_distance_code + + mov eax,1 + shl eax,cl + dec eax + and eax,ebp + add eax,edx + mov edx, [esp+12] + mov eax, [edx+eax*4] + jmp L_dodist + +ALIGN 4 +L_clip_window: +; 721 "inffast.S" + mov ecx,eax + mov eax, [esp+52] + neg ecx + mov esi, [esp+56] + + cmp eax,edx + jb L_invalid_distance_too_far + + add ecx,edx + cmp dword ptr [esp+48],0 + jne L_wrap_around_window + + sub eax,ecx + add esi,eax +; 749 "inffast.S" + mov eax, [esp+24] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + jmp L_do_copy1 + + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + jmp L_do_copy1 + +L_wrap_around_window: +; 793 "inffast.S" + mov eax, [esp+48] + cmp ecx,eax + jbe L_contiguous_in_window + + add esi, [esp+52] + add esi,eax + sub esi,ecx + sub ecx,eax + + + mov eax, [esp+24] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi, [esp+56] + mov ecx, [esp+48] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + jmp L_do_copy1 + +L_contiguous_in_window: +; 836 "inffast.S" + add esi,eax + sub esi,ecx + + + mov eax, [esp+24] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + +L_do_copy1: +; 862 "inffast.S" + mov ecx,eax + rep movsb + + mov esi, [esp+44] + jmp L_while_test +; 878 "inffast.S" +ALIGN 4 +L_init_mmx: + emms + + + + + + movd mm0,ebp + mov ebp,ebx +; 896 "inffast.S" + movd mm4,[esp+0] + movq mm3,mm4 + movd mm5,[esp+4] + movq mm2,mm5 + pxor mm1,mm1 + mov ebx, [esp+8] + jmp L_do_loop_mmx + +ALIGN 4 +L_do_loop_mmx: + psrlq mm0,mm1 + + cmp ebp,32 + ja L_get_length_code_mmx + + movd mm6,ebp + movd mm7,[esi] + add esi,4 + psllq mm7,mm6 + add ebp,32 + por mm0,mm7 + +L_get_length_code_mmx: + pand mm4,mm0 + movd eax,mm4 + movq mm4,mm3 + mov eax, [ebx+eax*4] + +L_dolen_mmx: + movzx ecx,ah + movd mm1,ecx + sub ebp,ecx + + test al,al + jnz L_test_for_length_base_mmx + + shr eax,16 + stosb + +L_while_test_mmx: + + + cmp [esp+16],edi + jbe L_break_loop + + cmp [esp+20],esi + ja L_do_loop_mmx + jmp L_break_loop + +L_test_for_length_base_mmx: + + mov edx,eax + shr edx,16 + + test al,16 + jz L_test_for_second_level_length_mmx + and eax,15 + jz L_decode_distance_mmx + + psrlq mm0,mm1 + movd mm1,eax + movd ecx,mm0 + sub ebp,eax + and ecx, [inflate_fast_mask+eax*4] + add edx,ecx + +L_decode_distance_mmx: + psrlq mm0,mm1 + + cmp ebp,32 + ja L_get_dist_code_mmx + + movd mm6,ebp + movd mm7,[esi] + add esi,4 + psllq mm7,mm6 + add ebp,32 + por mm0,mm7 + +L_get_dist_code_mmx: + mov ebx, [esp+12] + pand mm5,mm0 + movd eax,mm5 + movq mm5,mm2 + mov eax, [ebx+eax*4] + +L_dodist_mmx: + + movzx ecx,ah + mov ebx,eax + shr ebx,16 + sub ebp,ecx + movd mm1,ecx + + test al,16 + jz L_test_for_second_level_dist_mmx + and eax,15 + jz L_check_dist_one_mmx + +L_add_bits_to_dist_mmx: + psrlq mm0,mm1 + movd mm1,eax + movd ecx,mm0 + sub ebp,eax + and ecx, [inflate_fast_mask+eax*4] + add ebx,ecx + +L_check_window_mmx: + mov [esp+44],esi + mov eax,edi + sub eax, [esp+40] + + cmp eax,ebx + jb L_clip_window_mmx + + mov ecx,edx + mov esi,edi + sub esi,ebx + + sub ecx,3 + mov al, [esi] + mov [edi],al + mov al, [esi+1] + mov dl, [esi+2] + add esi,3 + mov [edi+1],al + mov [edi+2],dl + add edi,3 + rep movsb + + mov esi, [esp+44] + mov ebx, [esp+8] + jmp L_while_test_mmx + +ALIGN 4 +L_check_dist_one_mmx: + cmp ebx,1 + jne L_check_window_mmx + cmp [esp+40],edi + je L_check_window_mmx + + dec edi + mov ecx,edx + mov al, [edi] + sub ecx,3 + + mov [edi+1],al + mov [edi+2],al + mov [edi+3],al + add edi,4 + rep stosb + + mov ebx, [esp+8] + jmp L_while_test_mmx + +ALIGN 4 +L_test_for_second_level_length_mmx: + test al,64 + jnz L_test_for_end_of_block + + and eax,15 + psrlq mm0,mm1 + movd ecx,mm0 + and ecx, [inflate_fast_mask+eax*4] + add ecx,edx + mov eax, [ebx+ecx*4] + jmp L_dolen_mmx + +ALIGN 4 +L_test_for_second_level_dist_mmx: + test al,64 + jnz L_invalid_distance_code + + and eax,15 + psrlq mm0,mm1 + movd ecx,mm0 + and ecx, [inflate_fast_mask+eax*4] + mov eax, [esp+12] + add ecx,ebx + mov eax, [eax+ecx*4] + jmp L_dodist_mmx + +ALIGN 4 +L_clip_window_mmx: + + mov ecx,eax + mov eax, [esp+52] + neg ecx + mov esi, [esp+56] + + cmp eax,ebx + jb L_invalid_distance_too_far + + add ecx,ebx + cmp dword ptr [esp+48],0 + jne L_wrap_around_window_mmx + + sub eax,ecx + add esi,eax + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + jmp L_do_copy1_mmx + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + jmp L_do_copy1_mmx + +L_wrap_around_window_mmx: + + mov eax, [esp+48] + cmp ecx,eax + jbe L_contiguous_in_window_mmx + + add esi, [esp+52] + add esi,eax + sub esi,ecx + sub ecx,eax + + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi, [esp+56] + mov ecx, [esp+48] + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + jmp L_do_copy1_mmx + +L_contiguous_in_window_mmx: + + add esi,eax + sub esi,ecx + + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + +L_do_copy1_mmx: + + + mov ecx,edx + rep movsb + + mov esi, [esp+44] + mov ebx, [esp+8] + jmp L_while_test_mmx +; 1174 "inffast.S" +L_invalid_distance_code: + + + + + + mov ecx, invalid_distance_code_msg + mov edx,INFLATE_MODE_BAD + jmp L_update_stream_state + +L_test_for_end_of_block: + + + + + + test al,32 + jz L_invalid_literal_length_code + + mov ecx,0 + mov edx,INFLATE_MODE_TYPE + jmp L_update_stream_state + +L_invalid_literal_length_code: + + + + + + mov ecx, invalid_literal_length_code_msg + mov edx,INFLATE_MODE_BAD + jmp L_update_stream_state + +L_invalid_distance_too_far: + + + + mov esi, [esp+44] + mov ecx, invalid_distance_too_far_msg + mov edx,INFLATE_MODE_BAD + jmp L_update_stream_state + +L_update_stream_state: + + mov eax, [esp+88] + test ecx,ecx + jz L_skip_msg + mov [eax+24],ecx +L_skip_msg: + mov eax, [eax+28] + mov [eax+mode_state],edx + jmp L_break_loop + +ALIGN 4 +L_break_loop: +; 1243 "inffast.S" + cmp dword ptr [inflate_fast_use_mmx],2 + jne L_update_next_in + + + + mov ebx,ebp + +L_update_next_in: +; 1266 "inffast.S" + mov eax, [esp+88] + mov ecx,ebx + mov edx, [eax+28] + shr ecx,3 + sub esi,ecx + shl ecx,3 + sub ebx,ecx + mov [eax+12],edi + mov [edx+bits_state],ebx + mov ecx,ebx + + lea ebx, [esp+28] + cmp [esp+20],ebx + jne L_buf_not_used + + sub esi,ebx + mov ebx, [eax+0] + mov [esp+20],ebx + add esi,ebx + mov ebx, [eax+4] + sub ebx,11 + add [esp+20],ebx + +L_buf_not_used: + mov [eax+0],esi + + mov ebx,1 + shl ebx,cl + dec ebx + + + + + + cmp dword ptr [inflate_fast_use_mmx],2 + jne L_update_hold + + + + psrlq mm0,mm1 + movd ebp,mm0 + + emms + +L_update_hold: + + + + and ebp,ebx + mov [edx+hold_state],ebp + + + + + mov ebx, [esp+20] + cmp ebx,esi + jbe L_last_is_smaller + + sub ebx,esi + add ebx,11 + mov [eax+4],ebx + jmp L_fixup_out +L_last_is_smaller: + sub esi,ebx + neg esi + add esi,11 + mov [eax+4],esi + + + + +L_fixup_out: + + mov ebx, [esp+16] + cmp ebx,edi + jbe L_end_is_smaller + + sub ebx,edi + add ebx,257 + mov [eax+16],ebx + jmp L_done +L_end_is_smaller: + sub edi,ebx + neg edi + add edi,257 + mov [eax+16],edi + + + + + +L_done: + add esp,64 + popfd + pop ebx + pop ebp + pop esi + pop edi + ret + +_TEXT ends +end diff --git a/common/dist/zlib/contrib/masmx86/mkasm.bat b/common/dist/zlib/contrib/masmx86/mkasm.bat new file mode 100644 index 000000000..70a51f837 --- /dev/null +++ b/common/dist/zlib/contrib/masmx86/mkasm.bat @@ -0,0 +1,3 @@ +cl /DASMV /I..\.. /O2 /c gvmat32c.c +ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm +ml /coff /Zi /c /Flinffas32.lst inffas32.asm diff --git a/common/dist/zlib/contrib/masmx86/readme.txt b/common/dist/zlib/contrib/masmx86/readme.txt new file mode 100644 index 000000000..7b57167b7 --- /dev/null +++ b/common/dist/zlib/contrib/masmx86/readme.txt @@ -0,0 +1,21 @@ + +Summary +------- +This directory contains ASM implementations of the functions +longest_match() and inflate_fast(). + + +Use instructions +---------------- +Copy these files into the zlib source directory, then run the +appropriate makefile, as suggested below. + + +Build instructions +------------------ +* With Microsoft C and MASM: +nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="gvmat32c.obj gvmat32.obj inffas32.obj" + +* With Borland C and TASM: +make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="gvmat32c.obj gvmat32.obj inffas32.obj" OBJPA="+gvmat32c.obj+gvmat32.obj+inffas32.obj" + diff --git a/common/dist/zlib/contrib/minizip/ChangeLogUnzip b/common/dist/zlib/contrib/minizip/ChangeLogUnzip new file mode 100644 index 000000000..50ca6a9e0 --- /dev/null +++ b/common/dist/zlib/contrib/minizip/ChangeLogUnzip @@ -0,0 +1,67 @@ +Change in 1.01e (12 feb 05) +- Fix in zipOpen2 for globalcomment (Rolf Kalbermatter) +- Fix possible memory leak in unzip.c (Zoran Stevanovic) + +Change in 1.01b (20 may 04) +- Integrate patch from Debian package (submited by Mark Brown) +- Add tools mztools from Xavier Roche + +Change in 1.01 (8 may 04) +- fix buffer overrun risk in unzip.c (Xavier Roche) +- fix a minor buffer insecurity in minizip.c (Mike Whittaker) + +Change in 1.00: (10 sept 03) +- rename to 1.00 +- cosmetic code change + +Change in 0.22: (19 May 03) +- crypting support (unless you define NOCRYPT) +- append file in existing zipfile + +Change in 0.21: (10 Mar 03) +- bug fixes + +Change in 0.17: (27 Jan 02) +- bug fixes + +Change in 0.16: (19 Jan 02) +- Support of ioapi for virtualize zip file access + +Change in 0.15: (19 Mar 98) +- fix memory leak in minizip.c + +Change in 0.14: (10 Mar 98) +- fix bugs in minizip.c sample for zipping big file +- fix problem in month in date handling +- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for + comment handling + +Change in 0.13: (6 Mar 98) +- fix bugs in zip.c +- add real minizip sample + +Change in 0.12: (4 Mar 98) +- add zip.c and zip.h for creates .zip file +- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly) +- fix miniunz.c for file without specific record for directory + +Change in 0.11: (3 Mar 98) +- fix bug in unzGetCurrentFileInfo for get extra field and comment +- enhance miniunz sample, remove the bad unztst.c sample + +Change in 0.10: (2 Mar 98) +- fix bug in unzReadCurrentFile +- rename unzip* to unz* function and structure +- remove Windows-like hungary notation variable name +- modify some structure in unzip.h +- add somes comment in source +- remove unzipGetcCurrentFile function +- replace ZUNZEXPORT by ZEXPORT +- add unzGetLocalExtrafield for get the local extrafield info +- add a new sample, miniunz.c + +Change in 0.4: (25 Feb 98) +- suppress the type unzipFileInZip. + Only on file in the zipfile can be open at the same time +- fix somes typo in code +- added tm_unz structure in unzip_file_info (date/time in readable format) diff --git a/common/dist/zlib/contrib/minizip/Makefile b/common/dist/zlib/contrib/minizip/Makefile new file mode 100644 index 000000000..84eaad20d --- /dev/null +++ b/common/dist/zlib/contrib/minizip/Makefile @@ -0,0 +1,25 @@ +CC=cc +CFLAGS=-O -I../.. + +UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a +ZIP_OBJS = minizip.o zip.o ioapi.o ../../libz.a + +.c.o: + $(CC) -c $(CFLAGS) $*.c + +all: miniunz minizip + +miniunz: $(UNZ_OBJS) + $(CC) $(CFLAGS) -o $@ $(UNZ_OBJS) + +minizip: $(ZIP_OBJS) + $(CC) $(CFLAGS) -o $@ $(ZIP_OBJS) + +test: miniunz minizip + ./minizip test readme.txt + ./miniunz -l test.zip + mv readme.txt readme.old + ./miniunz test.zip + +clean: + /bin/rm -f *.o *~ minizip miniunz diff --git a/common/dist/zlib/contrib/minizip/crypt.h b/common/dist/zlib/contrib/minizip/crypt.h new file mode 100644 index 000000000..afd89429e --- /dev/null +++ b/common/dist/zlib/contrib/minizip/crypt.h @@ -0,0 +1,134 @@ +/* $NetBSD: crypt.h,v 1.1.1.1 2006/01/14 20:10:57 christos Exp $ */ + +/* crypt.h -- base code for crypt/uncrypt ZIPfile + + + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant + + This code is a modified version of crypting code in Infozip distribution + + The encryption/decryption parts of this source code (as opposed to the + non-echoing password parts) were originally written in Europe. The + whole source package can be freely distributed, including from the USA. + (Prior to January 2000, re-export from the US was a violation of US law.) + + This encryption code is a direct transcription of the algorithm from + Roger Schlafly, described by Phil Katz in the file appnote.txt. This + file (appnote.txt) is distributed with the PKZIP program (even in the + version without encryption capabilities). + + If you don't need crypting in your application, just define symbols + NOCRYPT and NOUNCRYPT. + + This code support the "Traditional PKWARE Encryption". + + The new AES encryption added on Zip format by Winzip (see the page + http://www.winzip.com/aes_info.htm ) and PKWare PKZip 5.x Strong + Encryption is not supported. +*/ + +#define CRC32(c, b) ((*(pcrc_32_tab+(((int)(c) ^ (b)) & 0xff))) ^ ((c) >> 8)) + +/*********************************************************************** + * Return the next byte in the pseudo-random sequence + */ +static int decrypt_byte(unsigned long* pkeys, const unsigned long* pcrc_32_tab) +{ + unsigned temp; /* POTENTIAL BUG: temp*(temp^1) may overflow in an + * unpredictable manner on 16-bit systems; not a problem + * with any known compiler so far, though */ + + temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2; + return (int)(((temp * (temp ^ 1)) >> 8) & 0xff); +} + +/*********************************************************************** + * Update the encryption keys with the next byte of plain text + */ +static int update_keys(unsigned long* pkeys,const unsigned long* pcrc_32_tab,int c) +{ + (*(pkeys+0)) = CRC32((*(pkeys+0)), c); + (*(pkeys+1)) += (*(pkeys+0)) & 0xff; + (*(pkeys+1)) = (*(pkeys+1)) * 134775813L + 1; + { + register int keyshift = (int)((*(pkeys+1)) >> 24); + (*(pkeys+2)) = CRC32((*(pkeys+2)), keyshift); + } + return c; +} + + +/*********************************************************************** + * Initialize the encryption keys and the random header according to + * the given password. + */ +static void init_keys(const char* passwd,unsigned long* pkeys,const unsigned long* pcrc_32_tab) +{ + *(pkeys+0) = 305419896L; + *(pkeys+1) = 591751049L; + *(pkeys+2) = 878082192L; + while (*passwd != '\0') { + update_keys(pkeys,pcrc_32_tab,(int)*passwd); + passwd++; + } +} + +#define zdecode(pkeys,pcrc_32_tab,c) \ + (update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab))) + +#define zencode(pkeys,pcrc_32_tab,c,t) \ + (t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), t^(c)) + +#ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED + +#define RAND_HEAD_LEN 12 + /* "last resort" source for second part of crypt seed pattern */ +# ifndef ZCR_SEED2 +# define ZCR_SEED2 3141592654UL /* use PI as default pattern */ +# endif + +static int crypthead(passwd, buf, bufSize, pkeys, pcrc_32_tab, crcForCrypting) + const char *passwd; /* password string */ + unsigned char *buf; /* where to write header */ + int bufSize; + unsigned long* pkeys; + const unsigned long* pcrc_32_tab; + unsigned long crcForCrypting; +{ + int n; /* index in random header */ + int t; /* temporary */ + int c; /* random byte */ + unsigned char header[RAND_HEAD_LEN-2]; /* random header */ + static unsigned calls = 0; /* ensure different random header each time */ + + if (bufSize> 7) & 0xff; + header[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, c, t); + } + /* Encrypt random header (last two bytes is high word of crc) */ + init_keys(passwd, pkeys, pcrc_32_tab); + for (n = 0; n < RAND_HEAD_LEN-2; n++) + { + buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t); + } + buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t); + buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t); + return n; +} + +#endif diff --git a/common/dist/zlib/contrib/minizip/ioapi.c b/common/dist/zlib/contrib/minizip/ioapi.c new file mode 100644 index 000000000..e9313807c --- /dev/null +++ b/common/dist/zlib/contrib/minizip/ioapi.c @@ -0,0 +1,179 @@ +/* $NetBSD: ioapi.c,v 1.1.1.1 2006/01/14 20:10:57 christos Exp $ */ + +/* ioapi.c -- IO base function header for compress/uncompress .zip + files using zlib + zip or unzip API + + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant +*/ + +#include +#include +#include + +#include "zlib.h" +#include "ioapi.h" + + + +/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */ + +#ifndef SEEK_CUR +#define SEEK_CUR 1 +#endif + +#ifndef SEEK_END +#define SEEK_END 2 +#endif + +#ifndef SEEK_SET +#define SEEK_SET 0 +#endif + +voidpf ZCALLBACK fopen_file_func OF(( + voidpf opaque, + const char* filename, + int mode)); + +uLong ZCALLBACK fread_file_func OF(( + voidpf opaque, + voidpf stream, + void* buf, + uLong size)); + +uLong ZCALLBACK fwrite_file_func OF(( + voidpf opaque, + voidpf stream, + const void* buf, + uLong size)); + +long ZCALLBACK ftell_file_func OF(( + voidpf opaque, + voidpf stream)); + +long ZCALLBACK fseek_file_func OF(( + voidpf opaque, + voidpf stream, + uLong offset, + int origin)); + +int ZCALLBACK fclose_file_func OF(( + voidpf opaque, + voidpf stream)); + +int ZCALLBACK ferror_file_func OF(( + voidpf opaque, + voidpf stream)); + + +voidpf ZCALLBACK fopen_file_func (opaque, filename, mode) + voidpf opaque; + const char* filename; + int mode; +{ + FILE* file = NULL; + const char* mode_fopen = NULL; + if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) + mode_fopen = "rb"; + else + if (mode & ZLIB_FILEFUNC_MODE_EXISTING) + mode_fopen = "r+b"; + else + if (mode & ZLIB_FILEFUNC_MODE_CREATE) + mode_fopen = "wb"; + + if ((filename!=NULL) && (mode_fopen != NULL)) + file = fopen(filename, mode_fopen); + return file; +} + + +uLong ZCALLBACK fread_file_func (opaque, stream, buf, size) + voidpf opaque; + voidpf stream; + void* buf; + uLong size; +{ + uLong ret; + ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream); + return ret; +} + + +uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size) + voidpf opaque; + voidpf stream; + const void* buf; + uLong size; +{ + uLong ret; + ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream); + return ret; +} + +long ZCALLBACK ftell_file_func (opaque, stream) + voidpf opaque; + voidpf stream; +{ + long ret; + ret = ftell((FILE *)stream); + return ret; +} + +long ZCALLBACK fseek_file_func (opaque, stream, offset, origin) + voidpf opaque; + voidpf stream; + uLong offset; + int origin; +{ + int fseek_origin=0; + long ret; + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + fseek_origin = SEEK_CUR; + break; + case ZLIB_FILEFUNC_SEEK_END : + fseek_origin = SEEK_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + fseek_origin = SEEK_SET; + break; + default: return -1; + } + ret = 0; + fseek((FILE *)stream, offset, fseek_origin); + return ret; +} + +int ZCALLBACK fclose_file_func (opaque, stream) + voidpf opaque; + voidpf stream; +{ + int ret; + ret = fclose((FILE *)stream); + return ret; +} + +int ZCALLBACK ferror_file_func (opaque, stream) + voidpf opaque; + voidpf stream; +{ + int ret; + ret = ferror((FILE *)stream); + return ret; +} + +void fill_fopen_filefunc (pzlib_filefunc_def) + zlib_filefunc_def* pzlib_filefunc_def; +{ + pzlib_filefunc_def->zopen_file = fopen_file_func; + pzlib_filefunc_def->zread_file = fread_file_func; + pzlib_filefunc_def->zwrite_file = fwrite_file_func; + pzlib_filefunc_def->ztell_file = ftell_file_func; + pzlib_filefunc_def->zseek_file = fseek_file_func; + pzlib_filefunc_def->zclose_file = fclose_file_func; + pzlib_filefunc_def->zerror_file = ferror_file_func; + pzlib_filefunc_def->opaque = NULL; +} diff --git a/common/dist/zlib/contrib/minizip/ioapi.h b/common/dist/zlib/contrib/minizip/ioapi.h new file mode 100644 index 000000000..0528d2130 --- /dev/null +++ b/common/dist/zlib/contrib/minizip/ioapi.h @@ -0,0 +1,77 @@ +/* $NetBSD: ioapi.h,v 1.1.1.1 2006/01/14 20:10:57 christos Exp $ */ + +/* ioapi.h -- IO base function header for compress/uncompress .zip + files using zlib + zip or unzip API + + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant +*/ + +#ifndef _ZLIBIOAPI_H +#define _ZLIBIOAPI_H + + +#define ZLIB_FILEFUNC_SEEK_CUR (1) +#define ZLIB_FILEFUNC_SEEK_END (2) +#define ZLIB_FILEFUNC_SEEK_SET (0) + +#define ZLIB_FILEFUNC_MODE_READ (1) +#define ZLIB_FILEFUNC_MODE_WRITE (2) +#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3) + +#define ZLIB_FILEFUNC_MODE_EXISTING (4) +#define ZLIB_FILEFUNC_MODE_CREATE (8) + + +#ifndef ZCALLBACK + +#if (defined(WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK) +#define ZCALLBACK CALLBACK +#else +#define ZCALLBACK +#endif +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode)); +typedef uLong (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size)); +typedef uLong (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size)); +typedef long (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream)); +typedef long (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin)); +typedef int (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream)); +typedef int (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream)); + +typedef struct zlib_filefunc_def_s +{ + open_file_func zopen_file; + read_file_func zread_file; + write_file_func zwrite_file; + tell_file_func ztell_file; + seek_file_func zseek_file; + close_file_func zclose_file; + testerror_file_func zerror_file; + voidpf opaque; +} zlib_filefunc_def; + + + +void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def)); + +#define ZREAD(filefunc,filestream,buf,size) ((*((filefunc).zread_file))((filefunc).opaque,filestream,buf,size)) +#define ZWRITE(filefunc,filestream,buf,size) ((*((filefunc).zwrite_file))((filefunc).opaque,filestream,buf,size)) +#define ZTELL(filefunc,filestream) ((*((filefunc).ztell_file))((filefunc).opaque,filestream)) +#define ZSEEK(filefunc,filestream,pos,mode) ((*((filefunc).zseek_file))((filefunc).opaque,filestream,pos,mode)) +#define ZCLOSE(filefunc,filestream) ((*((filefunc).zclose_file))((filefunc).opaque,filestream)) +#define ZERROR(filefunc,filestream) ((*((filefunc).zerror_file))((filefunc).opaque,filestream)) + + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/common/dist/zlib/contrib/minizip/iowin32.c b/common/dist/zlib/contrib/minizip/iowin32.c new file mode 100644 index 000000000..e01b1b401 --- /dev/null +++ b/common/dist/zlib/contrib/minizip/iowin32.c @@ -0,0 +1,272 @@ +/* $NetBSD: iowin32.c,v 1.1.1.1 2006/01/14 20:10:57 christos Exp $ */ + +/* iowin32.c -- IO base function header for compress/uncompress .zip + files using zlib + zip or unzip API + This IO API version uses the Win32 API (for Microsoft Windows) + + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant +*/ + +#include + +#include "zlib.h" +#include "ioapi.h" +#include "iowin32.h" + +#ifndef INVALID_HANDLE_VALUE +#define INVALID_HANDLE_VALUE (0xFFFFFFFF) +#endif + +#ifndef INVALID_SET_FILE_POINTER +#define INVALID_SET_FILE_POINTER ((DWORD)-1) +#endif + +voidpf ZCALLBACK win32_open_file_func OF(( + voidpf opaque, + const char* filename, + int mode)); + +uLong ZCALLBACK win32_read_file_func OF(( + voidpf opaque, + voidpf stream, + void* buf, + uLong size)); + +uLong ZCALLBACK win32_write_file_func OF(( + voidpf opaque, + voidpf stream, + const void* buf, + uLong size)); + +long ZCALLBACK win32_tell_file_func OF(( + voidpf opaque, + voidpf stream)); + +long ZCALLBACK win32_seek_file_func OF(( + voidpf opaque, + voidpf stream, + uLong offset, + int origin)); + +int ZCALLBACK win32_close_file_func OF(( + voidpf opaque, + voidpf stream)); + +int ZCALLBACK win32_error_file_func OF(( + voidpf opaque, + voidpf stream)); + +typedef struct +{ + HANDLE hf; + int error; +} WIN32FILE_IOWIN; + +voidpf ZCALLBACK win32_open_file_func (opaque, filename, mode) + voidpf opaque; + const char* filename; + int mode; +{ + const char* mode_fopen = NULL; + DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ; + HANDLE hFile = 0; + voidpf ret=NULL; + + dwDesiredAccess = dwShareMode = dwFlagsAndAttributes = 0; + + if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) + { + dwDesiredAccess = GENERIC_READ; + dwCreationDisposition = OPEN_EXISTING; + dwShareMode = FILE_SHARE_READ; + } + else + if (mode & ZLIB_FILEFUNC_MODE_EXISTING) + { + dwDesiredAccess = GENERIC_WRITE | GENERIC_READ; + dwCreationDisposition = OPEN_EXISTING; + } + else + if (mode & ZLIB_FILEFUNC_MODE_CREATE) + { + dwDesiredAccess = GENERIC_WRITE | GENERIC_READ; + dwCreationDisposition = CREATE_ALWAYS; + } + + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, + dwCreationDisposition, dwFlagsAndAttributes, NULL); + + if (hFile == INVALID_HANDLE_VALUE) + hFile = NULL; + + if (hFile != NULL) + { + WIN32FILE_IOWIN w32fiow; + w32fiow.hf = hFile; + w32fiow.error = 0; + ret = malloc(sizeof(WIN32FILE_IOWIN)); + if (ret==NULL) + CloseHandle(hFile); + else *((WIN32FILE_IOWIN*)ret) = w32fiow; + } + return ret; +} + + +uLong ZCALLBACK win32_read_file_func (opaque, stream, buf, size) + voidpf opaque; + voidpf stream; + void* buf; + uLong size; +{ + uLong ret=0; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + if (hFile != NULL) + if (!ReadFile(hFile, buf, size, &ret, NULL)) + { + DWORD dwErr = GetLastError(); + if (dwErr == ERROR_HANDLE_EOF) + dwErr = 0; + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + } + + return ret; +} + + +uLong ZCALLBACK win32_write_file_func (opaque, stream, buf, size) + voidpf opaque; + voidpf stream; + const void* buf; + uLong size; +{ + uLong ret=0; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + + if (hFile !=NULL) + if (!WriteFile(hFile, buf, size, &ret, NULL)) + { + DWORD dwErr = GetLastError(); + if (dwErr == ERROR_HANDLE_EOF) + dwErr = 0; + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + } + + return ret; +} + +long ZCALLBACK win32_tell_file_func (opaque, stream) + voidpf opaque; + voidpf stream; +{ + long ret=-1; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + if (hFile != NULL) + { + DWORD dwSet = SetFilePointer(hFile, 0, NULL, FILE_CURRENT); + if (dwSet == INVALID_SET_FILE_POINTER) + { + DWORD dwErr = GetLastError(); + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + ret = -1; + } + else + ret=(long)dwSet; + } + return ret; +} + +long ZCALLBACK win32_seek_file_func (opaque, stream, offset, origin) + voidpf opaque; + voidpf stream; + uLong offset; + int origin; +{ + DWORD dwMoveMethod=0xFFFFFFFF; + HANDLE hFile = NULL; + + long ret=-1; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + dwMoveMethod = FILE_CURRENT; + break; + case ZLIB_FILEFUNC_SEEK_END : + dwMoveMethod = FILE_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + dwMoveMethod = FILE_BEGIN; + break; + default: return -1; + } + + if (hFile != NULL) + { + DWORD dwSet = SetFilePointer(hFile, offset, NULL, dwMoveMethod); + if (dwSet == INVALID_SET_FILE_POINTER) + { + DWORD dwErr = GetLastError(); + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + ret = -1; + } + else + ret=0; + } + return ret; +} + +int ZCALLBACK win32_close_file_func (opaque, stream) + voidpf opaque; + voidpf stream; +{ + int ret=-1; + + if (stream!=NULL) + { + HANDLE hFile; + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + if (hFile != NULL) + { + CloseHandle(hFile); + ret=0; + } + free(stream); + } + return ret; +} + +int ZCALLBACK win32_error_file_func (opaque, stream) + voidpf opaque; + voidpf stream; +{ + int ret=-1; + if (stream!=NULL) + { + ret = ((WIN32FILE_IOWIN*)stream) -> error; + } + return ret; +} + +void fill_win32_filefunc (pzlib_filefunc_def) + zlib_filefunc_def* pzlib_filefunc_def; +{ + pzlib_filefunc_def->zopen_file = win32_open_file_func; + pzlib_filefunc_def->zread_file = win32_read_file_func; + pzlib_filefunc_def->zwrite_file = win32_write_file_func; + pzlib_filefunc_def->ztell_file = win32_tell_file_func; + pzlib_filefunc_def->zseek_file = win32_seek_file_func; + pzlib_filefunc_def->zclose_file = win32_close_file_func; + pzlib_filefunc_def->zerror_file = win32_error_file_func; + pzlib_filefunc_def->opaque=NULL; +} diff --git a/common/dist/zlib/contrib/minizip/iowin32.h b/common/dist/zlib/contrib/minizip/iowin32.h new file mode 100644 index 000000000..ebc843635 --- /dev/null +++ b/common/dist/zlib/contrib/minizip/iowin32.h @@ -0,0 +1,23 @@ +/* $NetBSD: iowin32.h,v 1.1.1.1 2006/01/14 20:10:57 christos Exp $ */ + +/* iowin32.h -- IO base function header for compress/uncompress .zip + files using zlib + zip or unzip API + This IO API version uses the Win32 API (for Microsoft Windows) + + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant +*/ + +#include + + +#ifdef __cplusplus +extern "C" { +#endif + +void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def)); + +#ifdef __cplusplus +} +#endif diff --git a/common/dist/zlib/contrib/minizip/miniunz.c b/common/dist/zlib/contrib/minizip/miniunz.c new file mode 100644 index 000000000..2937e8fbb --- /dev/null +++ b/common/dist/zlib/contrib/minizip/miniunz.c @@ -0,0 +1,587 @@ +/* $NetBSD: miniunz.c,v 1.1.1.1 2006/01/14 20:10:58 christos Exp $ */ + +/* + miniunz.c + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant +*/ + + +#include +#include +#include +#include +#include +#include + +#ifdef unix +# include +# include +#else +# include +# include +#endif + +#include "unzip.h" + +#define CASESENSITIVITY (0) +#define WRITEBUFFERSIZE (8192) +#define MAXFILENAME (256) + +#ifdef WIN32 +#define USEWIN32IOAPI +#include "iowin32.h" +#endif +/* + mini unzip, demo of unzip package + + usage : + Usage : miniunz [-exvlo] file.zip [file_to_extract] [-d extractdir] + + list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT + if it exists +*/ + + +/* change_file_date : change the date/time of a file + filename : the filename of the file where date/time must be modified + dosdate : the new date at the MSDos format (4 bytes) + tmu_date : the SAME new date at the tm_unz format */ +void change_file_date(filename,dosdate,tmu_date) + const char *filename; + uLong dosdate; + tm_unz tmu_date; +{ +#ifdef WIN32 + HANDLE hFile; + FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite; + + hFile = CreateFile(filename,GENERIC_READ | GENERIC_WRITE, + 0,NULL,OPEN_EXISTING,0,NULL); + GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite); + DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal); + LocalFileTimeToFileTime(&ftLocal,&ftm); + SetFileTime(hFile,&ftm,&ftLastAcc,&ftm); + CloseHandle(hFile); +#else +#ifdef unix + struct utimbuf ut; + struct tm newdate; + newdate.tm_sec = tmu_date.tm_sec; + newdate.tm_min=tmu_date.tm_min; + newdate.tm_hour=tmu_date.tm_hour; + newdate.tm_mday=tmu_date.tm_mday; + newdate.tm_mon=tmu_date.tm_mon; + if (tmu_date.tm_year > 1900) + newdate.tm_year=tmu_date.tm_year - 1900; + else + newdate.tm_year=tmu_date.tm_year ; + newdate.tm_isdst=-1; + + ut.actime=ut.modtime=mktime(&newdate); + utime(filename,&ut); +#endif +#endif +} + + +/* mymkdir and change_file_date are not 100 % portable + As I don't know well Unix, I wait feedback for the unix portion */ + +int mymkdir(dirname) + const char* dirname; +{ + int ret=0; +#ifdef WIN32 + ret = mkdir(dirname); +#else +#ifdef unix + ret = mkdir (dirname,0775); +#endif +#endif + return ret; +} + +int makedir (newdir) + char *newdir; +{ + char *buffer ; + char *p; + int len = (int)strlen(newdir); + + if (len <= 0) + return 0; + + buffer = (char*)malloc(len+1); + strcpy(buffer,newdir); + + if (buffer[len-1] == '/') { + buffer[len-1] = '\0'; + } + if (mymkdir(buffer) == 0) + { + free(buffer); + return 1; + } + + p = buffer+1; + while (1) + { + char hold; + + while(*p && *p != '\\' && *p != '/') + p++; + hold = *p; + *p = 0; + if ((mymkdir(buffer) == -1) && (errno == ENOENT)) + { + printf("couldn't create directory %s\n",buffer); + free(buffer); + return 0; + } + if (hold == 0) + break; + *p++ = hold; + } + free(buffer); + return 1; +} + +void do_banner() +{ + printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n"); + printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n"); +} + +void do_help() +{ + printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \ + " -e Extract without pathname (junk paths)\n" \ + " -x Extract with pathname\n" \ + " -v list files\n" \ + " -l list files\n" \ + " -d directory to extract into\n" \ + " -o overwrite files without prompting\n" \ + " -p extract crypted file using password\n\n"); +} + + +int do_list(uf) + unzFile uf; +{ + uLong i; + unz_global_info gi; + int err; + + err = unzGetGlobalInfo (uf,&gi); + if (err!=UNZ_OK) + printf("error %d with zipfile in unzGetGlobalInfo \n",err); + printf(" Length Method Size Ratio Date Time CRC-32 Name\n"); + printf(" ------ ------ ---- ----- ---- ---- ------ ----\n"); + for (i=0;i0) + ratio = (file_info.compressed_size*100)/file_info.uncompressed_size; + + /* display a '*' if the file is crypted */ + if ((file_info.flag & 1) != 0) + charCrypt='*'; + + if (file_info.compression_method==0) + string_method="Stored"; + else + if (file_info.compression_method==Z_DEFLATED) + { + uInt iLevel=(uInt)((file_info.flag & 0x6)/2); + if (iLevel==0) + string_method="Defl:N"; + else if (iLevel==1) + string_method="Defl:X"; + else if ((iLevel==2) || (iLevel==3)) + string_method="Defl:F"; /* 2:fast , 3 : extra fast*/ + } + else + string_method="Unkn. "; + + printf("%7lu %6s%c%7lu %3lu%% %2.2lu-%2.2lu-%2.2lu %2.2lu:%2.2lu %8.8lx %s\n", + file_info.uncompressed_size,string_method, + charCrypt, + file_info.compressed_size, + ratio, + (uLong)file_info.tmu_date.tm_mon + 1, + (uLong)file_info.tmu_date.tm_mday, + (uLong)file_info.tmu_date.tm_year % 100, + (uLong)file_info.tmu_date.tm_hour,(uLong)file_info.tmu_date.tm_min, + (uLong)file_info.crc,filename_inzip); + if ((i+1)='a') && (rep<='z')) + rep -= 0x20; + } + while ((rep!='Y') && (rep!='N') && (rep!='A')); + } + + if (rep == 'N') + skip = 1; + + if (rep == 'A') + *popt_overwrite=1; + } + + if ((skip==0) && (err==UNZ_OK)) + { + fout=fopen(write_filename,"wb"); + + /* some zipfile don't contain directory alone before file */ + if ((fout==NULL) && ((*popt_extract_without_path)==0) && + (filename_withoutpath!=(char*)filename_inzip)) + { + char c=*(filename_withoutpath-1); + *(filename_withoutpath-1)='\0'; + makedir(write_filename); + *(filename_withoutpath-1)=c; + fout=fopen(write_filename,"wb"); + } + + if (fout==NULL) + { + printf("error opening %s\n",write_filename); + } + } + + if (fout!=NULL) + { + printf(" extracting: %s\n",write_filename); + + do + { + err = unzReadCurrentFile(uf,buf,size_buf); + if (err<0) + { + printf("error %d with zipfile in unzReadCurrentFile\n",err); + break; + } + if (err>0) + if (fwrite(buf,err,1,fout)!=1) + { + printf("error in writing extracted file\n"); + err=UNZ_ERRNO; + break; + } + } + while (err>0); + if (fout) + fclose(fout); + + if (err==0) + change_file_date(write_filename,file_info.dosDate, + file_info.tmu_date); + } + + if (err==UNZ_OK) + { + err = unzCloseCurrentFile (uf); + if (err!=UNZ_OK) + { + printf("error %d with zipfile in unzCloseCurrentFile\n",err); + } + } + else + unzCloseCurrentFile(uf); /* don't lose the error */ + } + + free(buf); + return err; +} + + +int do_extract(uf,opt_extract_without_path,opt_overwrite,password) + unzFile uf; + int opt_extract_without_path; + int opt_overwrite; + const char* password; +{ + uLong i; + unz_global_info gi; + int err; + FILE* fout=NULL; + + err = unzGetGlobalInfo (uf,&gi); + if (err!=UNZ_OK) + printf("error %d with zipfile in unzGetGlobalInfo \n",err); + + for (i=0;i +#include +#include +#include +#include +#include + +#ifdef unix +# include +# include +# include +# include +#else +# include +# include +#endif + +#include "zip.h" + +#ifdef WIN32 +#define USEWIN32IOAPI +#include "iowin32.h" +#endif + + + +#define WRITEBUFFERSIZE (16384) +#define MAXFILENAME (256) + +#ifdef WIN32 +uLong filetime(f, tmzip, dt) + char *f; /* name of file to get info on */ + tm_zip *tmzip; /* return value: access, modific. and creation times */ + uLong *dt; /* dostime */ +{ + int ret = 0; + { + FILETIME ftLocal; + HANDLE hFind; + WIN32_FIND_DATA ff32; + + hFind = FindFirstFile(f,&ff32); + if (hFind != INVALID_HANDLE_VALUE) + { + FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal); + FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0); + FindClose(hFind); + ret = 1; + } + } + return ret; +} +#else +#ifdef unix +uLong filetime(f, tmzip, dt) + char *f; /* name of file to get info on */ + tm_zip *tmzip; /* return value: access, modific. and creation times */ + uLong *dt; /* dostime */ +{ + int ret=0; + struct stat s; /* results of stat() */ + struct tm* filedate; + time_t tm_t=0; + + if (strcmp(f,"-")!=0) + { + char name[MAXFILENAME+1]; + int len = strlen(f); + if (len > MAXFILENAME) + len = MAXFILENAME; + + strncpy(name, f,MAXFILENAME-1); + /* strncpy doesnt append the trailing NULL, of the string is too long. */ + name[ MAXFILENAME ] = '\0'; + + if (name[len - 1] == '/') + name[len - 1] = '\0'; + /* not all systems allow stat'ing a file with / appended */ + if (stat(name,&s)==0) + { + tm_t = s.st_mtime; + ret = 1; + } + } + filedate = localtime(&tm_t); + + tmzip->tm_sec = filedate->tm_sec; + tmzip->tm_min = filedate->tm_min; + tmzip->tm_hour = filedate->tm_hour; + tmzip->tm_mday = filedate->tm_mday; + tmzip->tm_mon = filedate->tm_mon ; + tmzip->tm_year = filedate->tm_year; + + return ret; +} +#else +uLong filetime(f, tmzip, dt) + char *f; /* name of file to get info on */ + tm_zip *tmzip; /* return value: access, modific. and creation times */ + uLong *dt; /* dostime */ +{ + return 0; +} +#endif +#endif + + + + +int check_exist_file(filename) + const char* filename; +{ + FILE* ftestexist; + int ret = 1; + ftestexist = fopen(filename,"rb"); + if (ftestexist==NULL) + ret = 0; + else + fclose(ftestexist); + return ret; +} + +void do_banner() +{ + printf("MiniZip 1.01b, demo of zLib + Zip package written by Gilles Vollant\n"); + printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n"); +} + +void do_help() +{ + printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] file.zip [files_to_add]\n\n" \ + " -o Overwrite existing file.zip\n" \ + " -a Append to existing file.zip\n" \ + " -0 Store only\n" \ + " -1 Compress faster\n" \ + " -9 Compress better\n\n"); +} + +/* calculate the CRC32 of a file, + because to encrypt a file, we need known the CRC32 of the file before */ +int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigned long* result_crc) +{ + unsigned long calculate_crc=0; + int err=ZIP_OK; + FILE * fin = fopen(filenameinzip,"rb"); + unsigned long size_read = 0; + unsigned long total_read = 0; + if (fin==NULL) + { + err = ZIP_ERRNO; + } + + if (err == ZIP_OK) + do + { + err = ZIP_OK; + size_read = (int)fread(buf,1,size_buf,fin); + if (size_read < size_buf) + if (feof(fin)==0) + { + printf("error in reading %s\n",filenameinzip); + err = ZIP_ERRNO; + } + + if (size_read>0) + calculate_crc = crc32(calculate_crc,buf,size_read); + total_read += size_read; + + } while ((err == ZIP_OK) && (size_read>0)); + + if (fin) + fclose(fin); + + *result_crc=calculate_crc; + printf("file %s crc %x\n",filenameinzip,calculate_crc); + return err; +} + +int main(argc,argv) + int argc; + char *argv[]; +{ + int i; + int opt_overwrite=0; + int opt_compress_level=Z_DEFAULT_COMPRESSION; + int zipfilenamearg = 0; + char filename_try[MAXFILENAME+16]; + int zipok; + int err=0; + int size_buf=0; + void* buf=NULL; + const char* password=NULL; + + + do_banner(); + if (argc==1) + { + do_help(); + return 0; + } + else + { + for (i=1;i='0') && (c<='9')) + opt_compress_level = c-'0'; + + if (((c=='p') || (c=='P')) && (i+1='a') && (rep<='z')) + rep -= 0x20; + } + while ((rep!='Y') && (rep!='N') && (rep!='A')); + if (rep=='N') + zipok = 0; + if (rep=='A') + opt_overwrite = 2; + } + } + + if (zipok==1) + { + zipFile zf; + int errclose; +# ifdef USEWIN32IOAPI + zlib_filefunc_def ffunc; + fill_win32_filefunc(&ffunc); + zf = zipOpen2(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc); +# else + zf = zipOpen(filename_try,(opt_overwrite==2) ? 2 : 0); +# endif + + if (zf == NULL) + { + printf("error opening %s\n",filename_try); + err= ZIP_ERRNO; + } + else + printf("creating %s\n",filename_try); + + for (i=zipfilenamearg+1;(i='0') || (argv[i][1]<='9'))) && + (strlen(argv[i]) == 2))) + { + FILE * fin; + int size_read; + const char* filenameinzip = argv[i]; + zip_fileinfo zi; + unsigned long crcFile=0; + + zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour = + zi.tmz_date.tm_mday = zi.tmz_date.tm_mon = zi.tmz_date.tm_year = 0; + zi.dosDate = 0; + zi.internal_fa = 0; + zi.external_fa = 0; + filetime(filenameinzip,&zi.tmz_date,&zi.dosDate); + +/* + err = zipOpenNewFileInZip(zf,filenameinzip,&zi, + NULL,0,NULL,0,NULL / * comment * /, + (opt_compress_level != 0) ? Z_DEFLATED : 0, + opt_compress_level); +*/ + if ((password != NULL) && (err==ZIP_OK)) + err = getFileCrc(filenameinzip,buf,size_buf,&crcFile); + + err = zipOpenNewFileInZip3(zf,filenameinzip,&zi, + NULL,0,NULL,0,NULL /* comment*/, + (opt_compress_level != 0) ? Z_DEFLATED : 0, + opt_compress_level,0, + /* -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, */ + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + password,crcFile); + + if (err != ZIP_OK) + printf("error in opening %s in zipfile\n",filenameinzip); + else + { + fin = fopen(filenameinzip,"rb"); + if (fin==NULL) + { + err=ZIP_ERRNO; + printf("error in opening %s for reading\n",filenameinzip); + } + } + + if (err == ZIP_OK) + do + { + err = ZIP_OK; + size_read = (int)fread(buf,1,size_buf,fin); + if (size_read < size_buf) + if (feof(fin)==0) + { + printf("error in reading %s\n",filenameinzip); + err = ZIP_ERRNO; + } + + if (size_read>0) + { + err = zipWriteInFileInZip (zf,buf,size_read); + if (err<0) + { + printf("error in writing %s in the zipfile\n", + filenameinzip); + } + + } + } while ((err == ZIP_OK) && (size_read>0)); + + if (fin) + fclose(fin); + + if (err<0) + err=ZIP_ERRNO; + else + { + err = zipCloseFileInZip(zf); + if (err!=ZIP_OK) + printf("error in closing %s in the zipfile\n", + filenameinzip); + } + } + } + errclose = zipClose(zf,NULL); + if (errclose != ZIP_OK) + printf("error in closing %s\n",filename_try); + } + else + { + do_help(); + } + + free(buf); + return 0; +} diff --git a/common/dist/zlib/contrib/minizip/mztools.c b/common/dist/zlib/contrib/minizip/mztools.c new file mode 100644 index 000000000..f0c904ccb --- /dev/null +++ b/common/dist/zlib/contrib/minizip/mztools.c @@ -0,0 +1,283 @@ +/* $NetBSD: mztools.c,v 1.1.1.1 2006/01/14 20:10:58 christos Exp $ */ + +/* + Additional tools for Minizip + Code: Xavier Roche '2004 + License: Same as ZLIB (www.gzip.org) +*/ + +/* Code */ +#include +#include +#include +#include "zlib.h" +#include "unzip.h" + +#define READ_8(adr) ((unsigned char)*(adr)) +#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) ) +#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) ) + +#define WRITE_8(buff, n) do { \ + *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \ +} while(0) +#define WRITE_16(buff, n) do { \ + WRITE_8((unsigned char*)(buff), n); \ + WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \ +} while(0) +#define WRITE_32(buff, n) do { \ + WRITE_16((unsigned char*)(buff), (n) & 0xffff); \ + WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \ +} while(0) + +extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered) +const char* file; +const char* fileOut; +const char* fileOutTmp; +uLong* nRecovered; +uLong* bytesRecovered; +{ + int err = Z_OK; + FILE* fpZip = fopen(file, "rb"); + FILE* fpOut = fopen(fileOut, "wb"); + FILE* fpOutCD = fopen(fileOutTmp, "wb"); + if (fpZip != NULL && fpOut != NULL) { + int entries = 0; + uLong totalBytes = 0; + char header[30]; + char filename[256]; + char extra[1024]; + int offset = 0; + int offsetCD = 0; + while ( fread(header, 1, 30, fpZip) == 30 ) { + int currentOffset = offset; + + /* File entry */ + if (READ_32(header) == 0x04034b50) { + unsigned int version = READ_16(header + 4); + unsigned int gpflag = READ_16(header + 6); + unsigned int method = READ_16(header + 8); + unsigned int filetime = READ_16(header + 10); + unsigned int filedate = READ_16(header + 12); + unsigned int crc = READ_32(header + 14); /* crc */ + unsigned int cpsize = READ_32(header + 18); /* compressed size */ + unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */ + unsigned int fnsize = READ_16(header + 26); /* file name length */ + unsigned int extsize = READ_16(header + 28); /* extra field length */ + filename[0] = extra[0] = '\0'; + + /* Header */ + if (fwrite(header, 1, 30, fpOut) == 30) { + offset += 30; + } else { + err = Z_ERRNO; + break; + } + + /* Filename */ + if (fnsize > 0) { + if (fread(filename, 1, fnsize, fpZip) == fnsize) { + if (fwrite(filename, 1, fnsize, fpOut) == fnsize) { + offset += fnsize; + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_STREAM_ERROR; + break; + } + + /* Extra field */ + if (extsize > 0) { + if (fread(extra, 1, extsize, fpZip) == extsize) { + if (fwrite(extra, 1, extsize, fpOut) == extsize) { + offset += extsize; + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_ERRNO; + break; + } + } + + /* Data */ + { + int dataSize = cpsize; + if (dataSize == 0) { + dataSize = uncpsize; + } + if (dataSize > 0) { + char* data = malloc(dataSize); + if (data != NULL) { + if ((int)fread(data, 1, dataSize, fpZip) == dataSize) { + if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) { + offset += dataSize; + totalBytes += dataSize; + } else { + err = Z_ERRNO; + } + } else { + err = Z_ERRNO; + } + free(data); + if (err != Z_OK) { + break; + } + } else { + err = Z_MEM_ERROR; + break; + } + } + } + + /* Central directory entry */ + { + char header[46]; + char* comment = ""; + int comsize = (int) strlen(comment); + WRITE_32(header, 0x02014b50); + WRITE_16(header + 4, version); + WRITE_16(header + 6, version); + WRITE_16(header + 8, gpflag); + WRITE_16(header + 10, method); + WRITE_16(header + 12, filetime); + WRITE_16(header + 14, filedate); + WRITE_32(header + 16, crc); + WRITE_32(header + 20, cpsize); + WRITE_32(header + 24, uncpsize); + WRITE_16(header + 28, fnsize); + WRITE_16(header + 30, extsize); + WRITE_16(header + 32, comsize); + WRITE_16(header + 34, 0); /* disk # */ + WRITE_16(header + 36, 0); /* int attrb */ + WRITE_32(header + 38, 0); /* ext attrb */ + WRITE_32(header + 42, currentOffset); + /* Header */ + if (fwrite(header, 1, 46, fpOutCD) == 46) { + offsetCD += 46; + + /* Filename */ + if (fnsize > 0) { + if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) { + offsetCD += fnsize; + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_STREAM_ERROR; + break; + } + + /* Extra field */ + if (extsize > 0) { + if (fwrite(extra, 1, extsize, fpOutCD) == extsize) { + offsetCD += extsize; + } else { + err = Z_ERRNO; + break; + } + } + + /* Comment field */ + if (comsize > 0) { + if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) { + offsetCD += comsize; + } else { + err = Z_ERRNO; + break; + } + } + + + } else { + err = Z_ERRNO; + break; + } + } + + /* Success */ + entries++; + + } else { + break; + } + } + + /* Final central directory */ + { + int entriesZip = entries; + char header[22]; + char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools"; + int comsize = (int) strlen(comment); + if (entriesZip > 0xffff) { + entriesZip = 0xffff; + } + WRITE_32(header, 0x06054b50); + WRITE_16(header + 4, 0); /* disk # */ + WRITE_16(header + 6, 0); /* disk # */ + WRITE_16(header + 8, entriesZip); /* hack */ + WRITE_16(header + 10, entriesZip); /* hack */ + WRITE_32(header + 12, offsetCD); /* size of CD */ + WRITE_32(header + 16, offset); /* offset to CD */ + WRITE_16(header + 20, comsize); /* comment */ + + /* Header */ + if (fwrite(header, 1, 22, fpOutCD) == 22) { + + /* Comment field */ + if (comsize > 0) { + if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) { + err = Z_ERRNO; + } + } + + } else { + err = Z_ERRNO; + } + } + + /* Final merge (file + central directory) */ + fclose(fpOutCD); + if (err == Z_OK) { + fpOutCD = fopen(fileOutTmp, "rb"); + if (fpOutCD != NULL) { + int nRead; + char buffer[8192]; + while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) { + if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) { + err = Z_ERRNO; + break; + } + } + fclose(fpOutCD); + } + } + + /* Close */ + fclose(fpZip); + fclose(fpOut); + + /* Wipe temporary file */ + (void)remove(fileOutTmp); + + /* Number of recovered entries */ + if (err == Z_OK) { + if (nRecovered != NULL) { + *nRecovered = entries; + } + if (bytesRecovered != NULL) { + *bytesRecovered = totalBytes; + } + } + } else { + err = Z_STREAM_ERROR; + } + return err; +} diff --git a/common/dist/zlib/contrib/minizip/mztools.h b/common/dist/zlib/contrib/minizip/mztools.h new file mode 100644 index 000000000..18f021197 --- /dev/null +++ b/common/dist/zlib/contrib/minizip/mztools.h @@ -0,0 +1,33 @@ +/* $NetBSD: mztools.h,v 1.1.1.1 2006/01/14 20:10:58 christos Exp $ */ + +/* + Additional tools for Minizip + Code: Xavier Roche '2004 + License: Same as ZLIB (www.gzip.org) +*/ + +#ifndef _zip_tools_H +#define _zip_tools_H + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#include "unzip.h" + +/* Repair a ZIP file (missing central directory) + file: file to recover + fileOut: output file after recovery + fileOutTmp: temporary file name used for recovery +*/ +extern int ZEXPORT unzRepair(const char* file, + const char* fileOut, + const char* fileOutTmp, + uLong* nRecovered, + uLong* bytesRecovered); + +#endif diff --git a/common/dist/zlib/contrib/minizip/unzip.c b/common/dist/zlib/contrib/minizip/unzip.c new file mode 100644 index 000000000..4d2bb19b2 --- /dev/null +++ b/common/dist/zlib/contrib/minizip/unzip.c @@ -0,0 +1,1600 @@ +/* $NetBSD: unzip.c,v 1.1.1.1 2006/01/14 20:10:59 christos Exp $ */ + +/* unzip.c -- IO for uncompress .zip files using zlib + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant + + Read unzip.h for more info +*/ + +/* Decryption code comes from crypt.c by Info-ZIP but has been greatly reduced in terms of +compatibility with older software. The following is from the original crypt.c. Code +woven in by Terry Thorsen 1/2003. +*/ +/* + Copyright (c) 1990-2000 Info-ZIP. All rights reserved. + + See the accompanying file LICENSE, version 2000-Apr-09 or later + (the contents of which are also included in zip.h) for terms of use. + If, for some reason, all these files are missing, the Info-ZIP license + also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html +*/ +/* + crypt.c (full version) by Info-ZIP. Last revised: [see crypt.h] + + The encryption/decryption parts of this source code (as opposed to the + non-echoing password parts) were originally written in Europe. The + whole source package can be freely distributed, including from the USA. + (Prior to January 2000, re-export from the US was a violation of US law.) + */ + +/* + This encryption code is a direct transcription of the algorithm from + Roger Schlafly, described by Phil Katz in the file appnote.txt. This + file (appnote.txt) is distributed with the PKZIP program (even in the + version without encryption capabilities). + */ + + +#include +#include +#include +#include "zlib.h" +#include "unzip.h" + +#ifdef STDC +# include +# include +# include +#endif +#ifdef NO_ERRNO_H + extern int errno; +#else +# include +#endif + + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + + +#ifndef CASESENSITIVITYDEFAULT_NO +# if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES) +# define CASESENSITIVITYDEFAULT_NO +# endif +#endif + + +#ifndef UNZ_BUFSIZE +#define UNZ_BUFSIZE (16384) +#endif + +#ifndef UNZ_MAXFILENAMEINZIP +#define UNZ_MAXFILENAMEINZIP (256) +#endif + +#ifndef ALLOC +# define ALLOC(size) (malloc(size)) +#endif +#ifndef TRYFREE +# define TRYFREE(p) {if (p) free(p);} +#endif + +#define SIZECENTRALDIRITEM (0x2e) +#define SIZEZIPLOCALHEADER (0x1e) + + + + +const char unz_copyright[] = + " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll"; + +/* unz_file_info_interntal contain internal info about a file in zipfile*/ +typedef struct unz_file_info_internal_s +{ + uLong offset_curfile;/* relative offset of local header 4 bytes */ +} unz_file_info_internal; + + +/* file_in_zip_read_info_s contain internal information about a file in zipfile, + when reading and decompress it */ +typedef struct +{ + char *read_buffer; /* internal buffer for compressed data */ + z_stream stream; /* zLib stream structure for inflate */ + + uLong pos_in_zipfile; /* position in byte on the zipfile, for fseek*/ + uLong stream_initialised; /* flag set if stream structure is initialised*/ + + uLong offset_local_extrafield;/* offset of the local extra field */ + uInt size_local_extrafield;/* size of the local extra field */ + uLong pos_local_extrafield; /* position in the local extra field in read*/ + + uLong crc32; /* crc32 of all data uncompressed */ + uLong crc32_wait; /* crc32 we must obtain after decompress all */ + uLong rest_read_compressed; /* number of byte to be decompressed */ + uLong rest_read_uncompressed;/*number of byte to be obtained after decomp*/ + zlib_filefunc_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + uLong compression_method; /* compression method (0==store) */ + uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + int raw; +} file_in_zip_read_info_s; + + +/* unz_s contain internal information about the zipfile +*/ +typedef struct +{ + zlib_filefunc_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + unz_global_info gi; /* public global information */ + uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + uLong num_file; /* number of the current file in the zipfile*/ + uLong pos_in_central_dir; /* pos of the current file in the central dir*/ + uLong current_file_ok; /* flag about the usability of the current file*/ + uLong central_pos; /* position of the beginning of the central dir*/ + + uLong size_central_dir; /* size of the central directory */ + uLong offset_central_dir; /* offset of start of central directory with + respect to the starting disk number */ + + unz_file_info cur_file_info; /* public info about the current file in zip*/ + unz_file_info_internal cur_file_info_internal; /* private info about it*/ + file_in_zip_read_info_s* pfile_in_zip_read; /* structure about the current + file if we are decompressing it */ + int encrypted; +# ifndef NOUNCRYPT + unsigned long keys[3]; /* keys defining the pseudo-random sequence */ + const unsigned long* pcrc_32_tab; +# endif +} unz_s; + + +#ifndef NOUNCRYPT +#include "crypt.h" +#endif + +/* =========================================================================== + Read a byte from a gz_stream; update next_in and avail_in. Return EOF + for end of file. + IN assertion: the stream s has been sucessfully opened for reading. +*/ + + +local int unzlocal_getByte OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + int *pi)); + +local int unzlocal_getByte(pzlib_filefunc_def,filestream,pi) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + int *pi; +{ + unsigned char c; + int err = (int)ZREAD(*pzlib_filefunc_def,filestream,&c,1); + if (err==1) + { + *pi = (int)c; + return UNZ_OK; + } + else + { + if (ZERROR(*pzlib_filefunc_def,filestream)) + return UNZ_ERRNO; + else + return UNZ_EOF; + } +} + + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets +*/ +local int unzlocal_getShort OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int unzlocal_getShort (pzlib_filefunc_def,filestream,pX) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong *pX; +{ + uLong x ; + int i; + int err; + + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int unzlocal_getLong OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int unzlocal_getLong (pzlib_filefunc_def,filestream,pX) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong *pX; +{ + uLong x ; + int i; + int err; + + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==UNZ_OK) + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<16; + + if (err==UNZ_OK) + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<24; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +} + + +/* My own strcmpi / strcasecmp */ +local int strcmpcasenosensitive_internal (fileName1,fileName2) + const char* fileName1; + const char* fileName2; +{ + for (;;) + { + char c1=*(fileName1++); + char c2=*(fileName2++); + if ((c1>='a') && (c1<='z')) + c1 -= 0x20; + if ((c2>='a') && (c2<='z')) + c2 -= 0x20; + if (c1=='\0') + return ((c2=='\0') ? 0 : -1); + if (c2=='\0') + return 1; + if (c1c2) + return 1; + } +} + + +#ifdef CASESENSITIVITYDEFAULT_NO +#define CASESENSITIVITYDEFAULTVALUE 2 +#else +#define CASESENSITIVITYDEFAULTVALUE 1 +#endif + +#ifndef STRCMPCASENOSENTIVEFUNCTION +#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal +#endif + +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) + +*/ +extern int ZEXPORT unzStringFileNameCompare (fileName1,fileName2,iCaseSensitivity) + const char* fileName1; + const char* fileName2; + int iCaseSensitivity; +{ + if (iCaseSensitivity==0) + iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE; + + if (iCaseSensitivity==1) + return strcmp(fileName1,fileName2); + + return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2); +} + +#ifndef BUFREADCOMMENT +#define BUFREADCOMMENT (0x400) +#endif + +/* + Locate the Central directory of a zipfile (at the end, just before + the global comment) +*/ +local uLong unzlocal_SearchCentralDir OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream)); + +local uLong unzlocal_SearchCentralDir(pzlib_filefunc_def,filestream) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; +{ + unsigned char* buf; + uLong uSizeFile; + uLong uBackRead; + uLong uMaxBack=0xffff; /* maximum size of global comment */ + uLong uPosFound=0; + + if (ZSEEK(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + + uSizeFile = ZTELL(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uSizeFile-uReadPos); + if (ZSEEK(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + return uPosFound; +} + +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows NT computer "c:\\test\\zlib114.zip" or on an Unix computer + "zlib/zlib114.zip". + If the zipfile cannot be opened (file doesn't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. +*/ +extern unzFile ZEXPORT unzOpen2 (path, pzlib_filefunc_def) + const char *path; + zlib_filefunc_def* pzlib_filefunc_def; +{ + unz_s us; + unz_s *s; + uLong central_pos,uL; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + uLong number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + + int err=UNZ_OK; + + if (unz_copyright[0]!=' ') + return NULL; + + if (pzlib_filefunc_def==NULL) + fill_fopen_filefunc(&us.z_filefunc); + else + us.z_filefunc = *pzlib_filefunc_def; + + us.filestream= (*(us.z_filefunc.zopen_file))(us.z_filefunc.opaque, + path, + ZLIB_FILEFUNC_MODE_READ | + ZLIB_FILEFUNC_MODE_EXISTING); + if (us.filestream==NULL) + return NULL; + + central_pos = unzlocal_SearchCentralDir(&us.z_filefunc,us.filestream); + if (central_pos==0) + err=UNZ_ERRNO; + + if (ZSEEK(us.z_filefunc, us.filestream, + central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + /* the signature, already checked */ + if (unzlocal_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of this disk */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of the disk with the start of the central directory */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir on this disk */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&us.gi.number_entry)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_entry_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((number_entry_CD!=us.gi.number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=UNZ_BADZIPFILE; + + /* size of the central directory */ + if (unzlocal_getLong(&us.z_filefunc, us.filestream,&us.size_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (unzlocal_getLong(&us.z_filefunc, us.filestream,&us.offset_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* zipfile comment length */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&us.gi.size_comment)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((central_pospfile_in_zip_read!=NULL) + unzCloseCurrentFile(file); + + ZCLOSE(s->z_filefunc, s->filestream); + TRYFREE(s); + return UNZ_OK; +} + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ +extern int ZEXPORT unzGetGlobalInfo (file,pglobal_info) + unzFile file; + unz_global_info *pglobal_info; +{ + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + *pglobal_info=s->gi; + return UNZ_OK; +} + + +/* + Translate date/time from Dos format to tm_unz (readable more easilty) +*/ +local void unzlocal_DosDateToTmuDate (ulDosDate, ptm) + uLong ulDosDate; + tm_unz* ptm; +{ + uLong uDate; + uDate = (uLong)(ulDosDate>>16); + ptm->tm_mday = (uInt)(uDate&0x1f) ; + ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ; + ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ; + + ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800); + ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ; + ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ; +} + +/* + Get Info about the current file in the zipfile, with internal only info +*/ +local int unzlocal_GetCurrentFileInfoInternal OF((unzFile file, + unz_file_info *pfile_info, + unz_file_info_internal + *pfile_info_internal, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize)); + +local int unzlocal_GetCurrentFileInfoInternal (file, + pfile_info, + pfile_info_internal, + szFileName, fileNameBufferSize, + extraField, extraFieldBufferSize, + szComment, commentBufferSize) + unzFile file; + unz_file_info *pfile_info; + unz_file_info_internal *pfile_info_internal; + char *szFileName; + uLong fileNameBufferSize; + void *extraField; + uLong extraFieldBufferSize; + char *szComment; + uLong commentBufferSize; +{ + unz_s* s; + unz_file_info file_info; + unz_file_info_internal file_info_internal; + int err=UNZ_OK; + uLong uMagic; + long lSeek=0; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (ZSEEK(s->z_filefunc, s->filestream, + s->pos_in_central_dir+s->byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + + /* we check the magic */ + if (err==UNZ_OK) + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x02014b50) + err=UNZ_BADZIPFILE; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.version) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.version_needed) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.flag) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.compression_method) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.dosDate) != UNZ_OK) + err=UNZ_ERRNO; + + unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date); + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.crc) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_filename) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_extra) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_comment) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.disk_num_start) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.internal_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.external_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK) + err=UNZ_ERRNO; + + lSeek+=file_info.size_filename; + if ((err==UNZ_OK) && (szFileName!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_filename0) && (fileNameBufferSize>0)) + if (ZREAD(s->z_filefunc, s->filestream,szFileName,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek -= uSizeRead; + } + + + if ((err==UNZ_OK) && (extraField!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_extraz_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0)) + if (ZREAD(s->z_filefunc, s->filestream,extraField,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek += file_info.size_file_extra - uSizeRead; + } + else + lSeek+=file_info.size_file_extra; + + + if ((err==UNZ_OK) && (szComment!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_commentz_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + if ((file_info.size_file_comment>0) && (commentBufferSize>0)) + if (ZREAD(s->z_filefunc, s->filestream,szComment,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek+=file_info.size_file_comment - uSizeRead; + } + else + lSeek+=file_info.size_file_comment; + + if ((err==UNZ_OK) && (pfile_info!=NULL)) + *pfile_info=file_info; + + if ((err==UNZ_OK) && (pfile_info_internal!=NULL)) + *pfile_info_internal=file_info_internal; + + return err; +} + + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. +*/ +extern int ZEXPORT unzGetCurrentFileInfo (file, + pfile_info, + szFileName, fileNameBufferSize, + extraField, extraFieldBufferSize, + szComment, commentBufferSize) + unzFile file; + unz_file_info *pfile_info; + char *szFileName; + uLong fileNameBufferSize; + void *extraField; + uLong extraFieldBufferSize; + char *szComment; + uLong commentBufferSize; +{ + return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL, + szFileName,fileNameBufferSize, + extraField,extraFieldBufferSize, + szComment,commentBufferSize); +} + +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ +extern int ZEXPORT unzGoToFirstFile (file) + unzFile file; +{ + int err=UNZ_OK; + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + s->pos_in_central_dir=s->offset_central_dir; + s->num_file=0; + err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ +extern int ZEXPORT unzGoToNextFile (file) + unzFile file; +{ + unz_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + if (s->gi.number_entry != 0xffff) /* 2^16 files overflow hack */ + if (s->num_file+1==s->gi.number_entry) + return UNZ_END_OF_LIST_OF_FILE; + + s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename + + s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ; + s->num_file++; + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + + +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzipStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ +extern int ZEXPORT unzLocateFile (file, szFileName, iCaseSensitivity) + unzFile file; + const char *szFileName; + int iCaseSensitivity; +{ + unz_s* s; + int err; + + /* We remember the 'current' position in the file so that we can jump + * back there if we fail. + */ + unz_file_info cur_file_infoSaved; + unz_file_info_internal cur_file_info_internalSaved; + uLong num_fileSaved; + uLong pos_in_central_dirSaved; + + + if (file==NULL) + return UNZ_PARAMERROR; + + if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP) + return UNZ_PARAMERROR; + + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + + /* Save the current state */ + num_fileSaved = s->num_file; + pos_in_central_dirSaved = s->pos_in_central_dir; + cur_file_infoSaved = s->cur_file_info; + cur_file_info_internalSaved = s->cur_file_info_internal; + + err = unzGoToFirstFile(file); + + while (err == UNZ_OK) + { + char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1]; + err = unzGetCurrentFileInfo(file,NULL, + szCurrentFileName,sizeof(szCurrentFileName)-1, + NULL,0,NULL,0); + if (err == UNZ_OK) + { + if (unzStringFileNameCompare(szCurrentFileName, + szFileName,iCaseSensitivity)==0) + return UNZ_OK; + err = unzGoToNextFile(file); + } + } + + /* We failed, so restore the state of the 'current file' to where we + * were. + */ + s->num_file = num_fileSaved ; + s->pos_in_central_dir = pos_in_central_dirSaved ; + s->cur_file_info = cur_file_infoSaved; + s->cur_file_info_internal = cur_file_info_internalSaved; + return err; +} + + +/* +/////////////////////////////////////////// +// Contributed by Ryan Haksi (mailto://cryogen@infoserve.net) +// I need random access +// +// Further optimization could be realized by adding an ability +// to cache the directory in memory. The goal being a single +// comprehensive file read to put the file I need in a memory. +*/ + +/* +typedef struct unz_file_pos_s +{ + uLong pos_in_zip_directory; // offset in file + uLong num_of_file; // # of file +} unz_file_pos; +*/ + +extern int ZEXPORT unzGetFilePos(file, file_pos) + unzFile file; + unz_file_pos* file_pos; +{ + unz_s* s; + + if (file==NULL || file_pos==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + + file_pos->pos_in_zip_directory = s->pos_in_central_dir; + file_pos->num_of_file = s->num_file; + + return UNZ_OK; +} + +extern int ZEXPORT unzGoToFilePos(file, file_pos) + unzFile file; + unz_file_pos* file_pos; +{ + unz_s* s; + int err; + + if (file==NULL || file_pos==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + /* jump to the right spot */ + s->pos_in_central_dir = file_pos->pos_in_zip_directory; + s->num_file = file_pos->num_of_file; + + /* set the current file */ + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + /* return results */ + s->current_file_ok = (err == UNZ_OK); + return err; +} + +/* +// Unzip Helper Functions - should be here? +/////////////////////////////////////////// +*/ + +/* + Read the local header of the current zipfile + Check the coherency of the local header and info in the end of central + directory about this file + store in *piSizeVar the size of extra info in local header + (filename and size of extra field data) +*/ +local int unzlocal_CheckCurrentFileCoherencyHeader (s,piSizeVar, + poffset_local_extrafield, + psize_local_extrafield) + unz_s* s; + uInt* piSizeVar; + uLong *poffset_local_extrafield; + uInt *psize_local_extrafield; +{ + uLong uMagic,uData,uFlags; + uLong size_filename; + uLong size_extra_field; + int err=UNZ_OK; + + *piSizeVar = 0; + *poffset_local_extrafield = 0; + *psize_local_extrafield = 0; + + if (ZSEEK(s->z_filefunc, s->filestream,s->cur_file_info_internal.offset_curfile + + s->byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + + if (err==UNZ_OK) + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x04034b50) + err=UNZ_BADZIPFILE; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) + err=UNZ_ERRNO; +/* + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion)) + err=UNZ_BADZIPFILE; +*/ + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uFlags) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method)) + err=UNZ_BADZIPFILE; + + if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) && + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* date/time */ + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* crc */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size compr */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size uncompr */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&size_filename) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename)) + err=UNZ_BADZIPFILE; + + *piSizeVar += (uInt)size_filename; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&size_extra_field) != UNZ_OK) + err=UNZ_ERRNO; + *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile + + SIZEZIPLOCALHEADER + size_filename; + *psize_local_extrafield = (uInt)size_extra_field; + + *piSizeVar += (uInt)size_extra_field; + + return err; +} + +/* + Open for reading data the current file in the zipfile. + If there is no error and the file is opened, the return value is UNZ_OK. +*/ +extern int ZEXPORT unzOpenCurrentFile3 (file, method, level, raw, password) + unzFile file; + int* method; + int* level; + int raw; + const char* password; +{ + int err=UNZ_OK; + uInt iSizeVar; + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + uLong offset_local_extrafield; /* offset of the local extra field */ + uInt size_local_extrafield; /* size of the local extra field */ +# ifndef NOUNCRYPT + char source[12]; +# else + if (password != NULL) + return UNZ_PARAMERROR; +# endif + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_PARAMERROR; + + if (s->pfile_in_zip_read != NULL) + unzCloseCurrentFile(file); + + if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar, + &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK) + return UNZ_BADZIPFILE; + + pfile_in_zip_read_info = (file_in_zip_read_info_s*) + ALLOC(sizeof(file_in_zip_read_info_s)); + if (pfile_in_zip_read_info==NULL) + return UNZ_INTERNALERROR; + + pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE); + pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield; + pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield; + pfile_in_zip_read_info->pos_local_extrafield=0; + pfile_in_zip_read_info->raw=raw; + + if (pfile_in_zip_read_info->read_buffer==NULL) + { + TRYFREE(pfile_in_zip_read_info); + return UNZ_INTERNALERROR; + } + + pfile_in_zip_read_info->stream_initialised=0; + + if (method!=NULL) + *method = (int)s->cur_file_info.compression_method; + + if (level!=NULL) + { + *level = 6; + switch (s->cur_file_info.flag & 0x06) + { + case 6 : *level = 1; break; + case 4 : *level = 2; break; + case 2 : *level = 9; break; + } + } + + if ((s->cur_file_info.compression_method!=0) && + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; + + pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc; + pfile_in_zip_read_info->crc32=0; + pfile_in_zip_read_info->compression_method = + s->cur_file_info.compression_method; + pfile_in_zip_read_info->filestream=s->filestream; + pfile_in_zip_read_info->z_filefunc=s->z_filefunc; + pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile; + + pfile_in_zip_read_info->stream.total_out = 0; + + if ((s->cur_file_info.compression_method==Z_DEFLATED) && + (!raw)) + { + pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; + pfile_in_zip_read_info->stream.zfree = (free_func)0; + pfile_in_zip_read_info->stream.opaque = (voidpf)0; + pfile_in_zip_read_info->stream.next_in = (voidpf)0; + pfile_in_zip_read_info->stream.avail_in = 0; + + err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS); + if (err == Z_OK) + pfile_in_zip_read_info->stream_initialised=1; + else + { + TRYFREE(pfile_in_zip_read_info); + return err; + } + /* windowBits is passed < 0 to tell that there is no zlib header. + * Note that in this case inflate *requires* an extra "dummy" byte + * after the compressed stream in order to complete decompression and + * return Z_STREAM_END. + * In unzip, i don't wait absolutely Z_STREAM_END because I known the + * size of both compressed and uncompressed data + */ + } + pfile_in_zip_read_info->rest_read_compressed = + s->cur_file_info.compressed_size ; + pfile_in_zip_read_info->rest_read_uncompressed = + s->cur_file_info.uncompressed_size ; + + + pfile_in_zip_read_info->pos_in_zipfile = + s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + + iSizeVar; + + pfile_in_zip_read_info->stream.avail_in = (uInt)0; + + s->pfile_in_zip_read = pfile_in_zip_read_info; + +# ifndef NOUNCRYPT + if (password != NULL) + { + int i; + s->pcrc_32_tab = get_crc_table(); + init_keys(password,s->keys,s->pcrc_32_tab); + if (ZSEEK(s->z_filefunc, s->filestream, + s->pfile_in_zip_read->pos_in_zipfile + + s->pfile_in_zip_read->byte_before_the_zipfile, + SEEK_SET)!=0) + return UNZ_INTERNALERROR; + if(ZREAD(s->z_filefunc, s->filestream,source, 12)<12) + return UNZ_INTERNALERROR; + + for (i = 0; i<12; i++) + zdecode(s->keys,s->pcrc_32_tab,source[i]); + + s->pfile_in_zip_read->pos_in_zipfile+=12; + s->encrypted=1; + } +# endif + + + return UNZ_OK; +} + +extern int ZEXPORT unzOpenCurrentFile (file) + unzFile file; +{ + return unzOpenCurrentFile3(file, NULL, NULL, 0, NULL); +} + +extern int ZEXPORT unzOpenCurrentFilePassword (file, password) + unzFile file; + const char* password; +{ + return unzOpenCurrentFile3(file, NULL, NULL, 0, password); +} + +extern int ZEXPORT unzOpenCurrentFile2 (file,method,level,raw) + unzFile file; + int* method; + int* level; + int raw; +{ + return unzOpenCurrentFile3(file, method, level, raw, NULL); +} + +/* + Read bytes from the current file. + buf contain buffer where data must be copied + len the size of buf. + + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ +extern int ZEXPORT unzReadCurrentFile (file, buf, len) + unzFile file; + voidp buf; + unsigned len; +{ + int err=UNZ_OK; + uInt iRead = 0; + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if ((pfile_in_zip_read_info->read_buffer == NULL)) + return UNZ_END_OF_LIST_OF_FILE; + if (len==0) + return 0; + + pfile_in_zip_read_info->stream.next_out = (Bytef*)buf; + + pfile_in_zip_read_info->stream.avail_out = (uInt)len; + + if ((len>pfile_in_zip_read_info->rest_read_uncompressed) && + (!(pfile_in_zip_read_info->raw))) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_uncompressed; + + if ((len>pfile_in_zip_read_info->rest_read_compressed+ + pfile_in_zip_read_info->stream.avail_in) && + (pfile_in_zip_read_info->raw)) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_compressed+ + pfile_in_zip_read_info->stream.avail_in; + + while (pfile_in_zip_read_info->stream.avail_out>0) + { + if ((pfile_in_zip_read_info->stream.avail_in==0) && + (pfile_in_zip_read_info->rest_read_compressed>0)) + { + uInt uReadThis = UNZ_BUFSIZE; + if (pfile_in_zip_read_info->rest_read_compressedrest_read_compressed; + if (uReadThis == 0) + return UNZ_EOF; + if (ZSEEK(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->pos_in_zipfile + + pfile_in_zip_read_info->byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + if (ZREAD(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->read_buffer, + uReadThis)!=uReadThis) + return UNZ_ERRNO; + + +# ifndef NOUNCRYPT + if(s->encrypted) + { + uInt i; + for(i=0;iread_buffer[i] = + zdecode(s->keys,s->pcrc_32_tab, + pfile_in_zip_read_info->read_buffer[i]); + } +# endif + + + pfile_in_zip_read_info->pos_in_zipfile += uReadThis; + + pfile_in_zip_read_info->rest_read_compressed-=uReadThis; + + pfile_in_zip_read_info->stream.next_in = + (Bytef*)pfile_in_zip_read_info->read_buffer; + pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis; + } + + if ((pfile_in_zip_read_info->compression_method==0) || (pfile_in_zip_read_info->raw)) + { + uInt uDoCopy,i ; + + if ((pfile_in_zip_read_info->stream.avail_in == 0) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + return (iRead==0) ? UNZ_EOF : iRead; + + if (pfile_in_zip_read_info->stream.avail_out < + pfile_in_zip_read_info->stream.avail_in) + uDoCopy = pfile_in_zip_read_info->stream.avail_out ; + else + uDoCopy = pfile_in_zip_read_info->stream.avail_in ; + + for (i=0;istream.next_out+i) = + *(pfile_in_zip_read_info->stream.next_in+i); + + pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32, + pfile_in_zip_read_info->stream.next_out, + uDoCopy); + pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy; + pfile_in_zip_read_info->stream.avail_in -= uDoCopy; + pfile_in_zip_read_info->stream.avail_out -= uDoCopy; + pfile_in_zip_read_info->stream.next_out += uDoCopy; + pfile_in_zip_read_info->stream.next_in += uDoCopy; + pfile_in_zip_read_info->stream.total_out += uDoCopy; + iRead += uDoCopy; + } + else + { + uLong uTotalOutBefore,uTotalOutAfter; + const Bytef *bufBefore; + uLong uOutThis; + int flush=Z_SYNC_FLUSH; + + uTotalOutBefore = pfile_in_zip_read_info->stream.total_out; + bufBefore = pfile_in_zip_read_info->stream.next_out; + + /* + if ((pfile_in_zip_read_info->rest_read_uncompressed == + pfile_in_zip_read_info->stream.avail_out) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + flush = Z_FINISH; + */ + err=inflate(&pfile_in_zip_read_info->stream,flush); + + if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL)) + err = Z_DATA_ERROR; + + uTotalOutAfter = pfile_in_zip_read_info->stream.total_out; + uOutThis = uTotalOutAfter-uTotalOutBefore; + + pfile_in_zip_read_info->crc32 = + crc32(pfile_in_zip_read_info->crc32,bufBefore, + (uInt)(uOutThis)); + + pfile_in_zip_read_info->rest_read_uncompressed -= + uOutThis; + + iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); + + if (err==Z_STREAM_END) + return (iRead==0) ? UNZ_EOF : iRead; + if (err!=Z_OK) + break; + } + } + + if (err==Z_OK) + return iRead; + return err; +} + + +/* + Give the current position in uncompressed data +*/ +extern z_off_t ZEXPORT unztell (file) + unzFile file; +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + return (z_off_t)pfile_in_zip_read_info->stream.total_out; +} + + +/* + return 1 if the end of file was reached, 0 elsewhere +*/ +extern int ZEXPORT unzeof (file) + unzFile file; +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + if (pfile_in_zip_read_info->rest_read_uncompressed == 0) + return 1; + else + return 0; +} + + + +/* + Read extra field from the current file (opened by unzOpenCurrentFile) + This is the local-header version of the extra field (sometimes, there is + more info in the local-header version than in the central-header) + + if buf==NULL, it return the size of the local extra field that can be read + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ +extern int ZEXPORT unzGetLocalExtrafield (file,buf,len) + unzFile file; + voidp buf; + unsigned len; +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + uInt read_now; + uLong size_to_read; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + size_to_read = (pfile_in_zip_read_info->size_local_extrafield - + pfile_in_zip_read_info->pos_local_extrafield); + + if (buf==NULL) + return (int)size_to_read; + + if (len>size_to_read) + read_now = (uInt)size_to_read; + else + read_now = (uInt)len ; + + if (read_now==0) + return 0; + + if (ZSEEK(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->offset_local_extrafield + + pfile_in_zip_read_info->pos_local_extrafield, + ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + if (ZREAD(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + buf,read_now)!=read_now) + return UNZ_ERRNO; + + return (int)read_now; +} + +/* + Close the file in zip opened with unzipOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ +extern int ZEXPORT unzCloseCurrentFile (file) + unzFile file; +{ + int err=UNZ_OK; + + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if ((pfile_in_zip_read_info->rest_read_uncompressed == 0) && + (!pfile_in_zip_read_info->raw)) + { + if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait) + err=UNZ_CRCERROR; + } + + + TRYFREE(pfile_in_zip_read_info->read_buffer); + pfile_in_zip_read_info->read_buffer = NULL; + if (pfile_in_zip_read_info->stream_initialised) + inflateEnd(&pfile_in_zip_read_info->stream); + + pfile_in_zip_read_info->stream_initialised = 0; + TRYFREE(pfile_in_zip_read_info); + + s->pfile_in_zip_read=NULL; + + return err; +} + + +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ +extern int ZEXPORT unzGetGlobalComment (file, szComment, uSizeBuf) + unzFile file; + char *szComment; + uLong uSizeBuf; +{ + int err=UNZ_OK; + unz_s* s; + uLong uReadThis ; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + uReadThis = uSizeBuf; + if (uReadThis>s->gi.size_comment) + uReadThis = s->gi.size_comment; + + if (ZSEEK(s->z_filefunc,s->filestream,s->central_pos+22,ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + if (uReadThis>0) + { + *szComment='\0'; + if (ZREAD(s->z_filefunc,s->filestream,szComment,uReadThis)!=uReadThis) + return UNZ_ERRNO; + } + + if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) + *(szComment+s->gi.size_comment)='\0'; + return (int)uReadThis; +} + +/* Additions by RX '2004 */ +extern uLong ZEXPORT unzGetOffset (file) + unzFile file; +{ + unz_s* s; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return 0; + if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff) + if (s->num_file==s->gi.number_entry) + return 0; + return s->pos_in_central_dir; +} + +extern int ZEXPORT unzSetOffset (file, pos) + unzFile file; + uLong pos; +{ + unz_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + s->pos_in_central_dir = pos; + s->num_file = s->gi.number_entry; /* hack */ + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} diff --git a/common/dist/zlib/contrib/minizip/unzip.h b/common/dist/zlib/contrib/minizip/unzip.h new file mode 100644 index 000000000..4274b9a64 --- /dev/null +++ b/common/dist/zlib/contrib/minizip/unzip.h @@ -0,0 +1,356 @@ +/* $NetBSD: unzip.h,v 1.1.1.1 2006/01/14 20:10:59 christos Exp $ */ + +/* unzip.h -- IO for uncompress .zip files using zlib + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant + + This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g + WinZip, InfoZip tools and compatible. + + Multi volume ZipFile (span) are not supported. + Encryption compatible with pkzip 2.04g only supported + Old compressions used by old PKZip 1.x are not supported + + + I WAIT FEEDBACK at mail info@winimage.com + Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution + + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + +*/ + +/* for more info about .ZIP format, see + http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip + http://www.info-zip.org/pub/infozip/doc/ + PkWare has also a specification at : + ftp://ftp.pkware.com/probdesc.zip +*/ + +#ifndef _unz_H +#define _unz_H + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#ifndef _ZLIBIOAPI_H +#include "ioapi.h" +#endif + +#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP) +/* like the STRICT of WIN32, we define a pointer that cannot be converted + from (void*) without cast */ +typedef struct TagunzFile__ { int unused; } unzFile__; +typedef unzFile__ *unzFile; +#else +typedef voidp unzFile; +#endif + + +#define UNZ_OK (0) +#define UNZ_END_OF_LIST_OF_FILE (-100) +#define UNZ_ERRNO (Z_ERRNO) +#define UNZ_EOF (0) +#define UNZ_PARAMERROR (-102) +#define UNZ_BADZIPFILE (-103) +#define UNZ_INTERNALERROR (-104) +#define UNZ_CRCERROR (-105) + +/* tm_unz contain date/time info */ +typedef struct tm_unz_s +{ + uInt tm_sec; /* seconds after the minute - [0,59] */ + uInt tm_min; /* minutes after the hour - [0,59] */ + uInt tm_hour; /* hours since midnight - [0,23] */ + uInt tm_mday; /* day of the month - [1,31] */ + uInt tm_mon; /* months since January - [0,11] */ + uInt tm_year; /* years - [1980..2044] */ +} tm_unz; + +/* unz_global_info structure contain global data about the ZIPfile + These data comes from the end of central dir */ +typedef struct unz_global_info_s +{ + uLong number_entry; /* total number of entries in + the central dir on this disk */ + uLong size_comment; /* size of the global comment of the zipfile */ +} unz_global_info; + + +/* unz_file_info contain information about a file in the zipfile */ +typedef struct unz_file_info_s +{ + uLong version; /* version made by 2 bytes */ + uLong version_needed; /* version needed to extract 2 bytes */ + uLong flag; /* general purpose bit flag 2 bytes */ + uLong compression_method; /* compression method 2 bytes */ + uLong dosDate; /* last mod file date in Dos fmt 4 bytes */ + uLong crc; /* crc-32 4 bytes */ + uLong compressed_size; /* compressed size 4 bytes */ + uLong uncompressed_size; /* uncompressed size 4 bytes */ + uLong size_filename; /* filename length 2 bytes */ + uLong size_file_extra; /* extra field length 2 bytes */ + uLong size_file_comment; /* file comment length 2 bytes */ + + uLong disk_num_start; /* disk number start 2 bytes */ + uLong internal_fa; /* internal file attributes 2 bytes */ + uLong external_fa; /* external file attributes 4 bytes */ + + tm_unz tmu_date; +} unz_file_info; + +extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1, + const char* fileName2, + int iCaseSensitivity)); +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) +*/ + + +extern unzFile ZEXPORT unzOpen OF((const char *path)); +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer + "zlib/zlib113.zip". + If the zipfile cannot be opened (file don't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. +*/ + +extern unzFile ZEXPORT unzOpen2 OF((const char *path, + zlib_filefunc_def* pzlib_filefunc_def)); +/* + Open a Zip file, like unzOpen, but provide a set of file low level API + for read/write the zip file (see ioapi.h) +*/ + +extern int ZEXPORT unzClose OF((unzFile file)); +/* + Close a ZipFile opened with unzipOpen. + If there is files inside the .Zip opened with unzOpenCurrentFile (see later), + these files MUST be closed with unzipCloseCurrentFile before call unzipClose. + return UNZ_OK if there is no problem. */ + +extern int ZEXPORT unzGetGlobalInfo OF((unzFile file, + unz_global_info *pglobal_info)); +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ + + +extern int ZEXPORT unzGetGlobalComment OF((unzFile file, + char *szComment, + uLong uSizeBuf)); +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ + + +/***************************************************************************/ +/* Unzip package allow you browse the directory of the zipfile */ + +extern int ZEXPORT unzGoToFirstFile OF((unzFile file)); +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ + +extern int ZEXPORT unzGoToNextFile OF((unzFile file)); +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ + +extern int ZEXPORT unzLocateFile OF((unzFile file, + const char *szFileName, + int iCaseSensitivity)); +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ + + +/* ****************************************** */ +/* Ryan supplied functions */ +/* unz_file_info contain information about a file in the zipfile */ +typedef struct unz_file_pos_s +{ + uLong pos_in_zip_directory; /* offset in zip file directory */ + uLong num_of_file; /* # of file */ +} unz_file_pos; + +extern int ZEXPORT unzGetFilePos( + unzFile file, + unz_file_pos* file_pos); + +extern int ZEXPORT unzGoToFilePos( + unzFile file, + unz_file_pos* file_pos); + +/* ****************************************** */ + +extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file, + unz_file_info *pfile_info, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize)); +/* + Get Info about the current file + if pfile_info!=NULL, the *pfile_info structure will contain somes info about + the current file + if szFileName!=NULL, the filemane string will be copied in szFileName + (fileNameBufferSize is the size of the buffer) + if extraField!=NULL, the extra field information will be copied in extraField + (extraFieldBufferSize is the size of the buffer). + This is the Central-header version of the extra field + if szComment!=NULL, the comment string of the file will be copied in szComment + (commentBufferSize is the size of the buffer) +*/ + +/***************************************************************************/ +/* for reading the content of the current zipfile, you can open it, read data + from it, and close it (you can close it before reading all the file) + */ + +extern int ZEXPORT unzOpenCurrentFile OF((unzFile file)); +/* + Open for reading data the current file in the zipfile. + If there is no error, the return value is UNZ_OK. +*/ + +extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file, + const char* password)); +/* + Open for reading data the current file in the zipfile. + password is a crypting password + If there is no error, the return value is UNZ_OK. +*/ + +extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file, + int* method, + int* level, + int raw)); +/* + Same than unzOpenCurrentFile, but open for read raw the file (not uncompress) + if raw==1 + *method will receive method of compression, *level will receive level of + compression + note : you can set level parameter as NULL (if you did not want known level, + but you CANNOT set method parameter as NULL +*/ + +extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file, + int* method, + int* level, + int raw, + const char* password)); +/* + Same than unzOpenCurrentFile, but open for read raw the file (not uncompress) + if raw==1 + *method will receive method of compression, *level will receive level of + compression + note : you can set level parameter as NULL (if you did not want known level, + but you CANNOT set method parameter as NULL +*/ + + +extern int ZEXPORT unzCloseCurrentFile OF((unzFile file)); +/* + Close the file in zip opened with unzOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ + +extern int ZEXPORT unzReadCurrentFile OF((unzFile file, + voidp buf, + unsigned len)); +/* + Read bytes from the current file (opened by unzOpenCurrentFile) + buf contain buffer where data must be copied + len the size of buf. + + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ + +extern z_off_t ZEXPORT unztell OF((unzFile file)); +/* + Give the current position in uncompressed data +*/ + +extern int ZEXPORT unzeof OF((unzFile file)); +/* + return 1 if the end of file was reached, 0 elsewhere +*/ + +extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file, + voidp buf, + unsigned len)); +/* + Read extra field from the current file (opened by unzOpenCurrentFile) + This is the local-header version of the extra field (sometimes, there is + more info in the local-header version than in the central-header) + + if buf==NULL, it return the size of the local extra field + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ + +/***************************************************************************/ + +/* Get the current file offset */ +extern uLong ZEXPORT unzGetOffset (unzFile file); + +/* Set the current file offset */ +extern int ZEXPORT unzSetOffset (unzFile file, uLong pos); + + + +#ifdef __cplusplus +} +#endif + +#endif /* _unz_H */ diff --git a/common/dist/zlib/contrib/minizip/zip.c b/common/dist/zlib/contrib/minizip/zip.c new file mode 100644 index 000000000..d83c7257a --- /dev/null +++ b/common/dist/zlib/contrib/minizip/zip.c @@ -0,0 +1,1221 @@ +/* $NetBSD: zip.c,v 1.1.1.1 2006/01/14 20:11:00 christos Exp $ */ + +/* zip.c -- IO on .zip files using zlib + Version 1.01e, February 12th, 2005 + + 27 Dec 2004 Rolf Kalbermatter + Modification to zipOpen2 to support globalComment retrieval. + + Copyright (C) 1998-2005 Gilles Vollant + + Read zip.h for more info +*/ + + +#include +#include +#include +#include +#include "zlib.h" +#include "zip.h" + +#ifdef STDC +# include +# include +# include +#endif +#ifdef NO_ERRNO_H + extern int errno; +#else +# include +#endif + + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +#ifndef VERSIONMADEBY +# define VERSIONMADEBY (0x0) /* platform depedent */ +#endif + +#ifndef Z_BUFSIZE +#define Z_BUFSIZE (16384) +#endif + +#ifndef Z_MAXFILENAMEINZIP +#define Z_MAXFILENAMEINZIP (256) +#endif + +#ifndef ALLOC +# define ALLOC(size) (malloc(size)) +#endif +#ifndef TRYFREE +# define TRYFREE(p) {if (p) free(p);} +#endif + +/* +#define SIZECENTRALDIRITEM (0x2e) +#define SIZEZIPLOCALHEADER (0x1e) +*/ + +/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */ + +#ifndef SEEK_CUR +#define SEEK_CUR 1 +#endif + +#ifndef SEEK_END +#define SEEK_END 2 +#endif + +#ifndef SEEK_SET +#define SEEK_SET 0 +#endif + +#ifndef DEF_MEM_LEVEL +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +#endif +const char zip_copyright[] = + " zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll"; + + +#define SIZEDATA_INDATABLOCK (4096-(4*4)) + +#define LOCALHEADERMAGIC (0x04034b50) +#define CENTRALHEADERMAGIC (0x02014b50) +#define ENDHEADERMAGIC (0x06054b50) + +#define FLAG_LOCALHEADER_OFFSET (0x06) +#define CRC_LOCALHEADER_OFFSET (0x0e) + +#define SIZECENTRALHEADER (0x2e) /* 46 */ + +typedef struct linkedlist_datablock_internal_s +{ + struct linkedlist_datablock_internal_s* next_datablock; + uLong avail_in_this_block; + uLong filled_in_this_block; + uLong unused; /* for future use and alignement */ + unsigned char data[SIZEDATA_INDATABLOCK]; +} linkedlist_datablock_internal; + +typedef struct linkedlist_data_s +{ + linkedlist_datablock_internal* first_block; + linkedlist_datablock_internal* last_block; +} linkedlist_data; + + +typedef struct +{ + z_stream stream; /* zLib stream structure for inflate */ + int stream_initialised; /* 1 is stream is initialised */ + uInt pos_in_buffered_data; /* last written byte in buffered_data */ + + uLong pos_local_header; /* offset of the local header of the file + currenty writing */ + char* central_header; /* central header data for the current file */ + uLong size_centralheader; /* size of the central header for cur file */ + uLong flag; /* flag of the file currently writing */ + + int method; /* compression method of file currenty wr.*/ + int raw; /* 1 for directly writing raw data */ + Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/ + uLong dosDate; + uLong crc32; + int encrypt; +#ifndef NOCRYPT + unsigned long keys[3]; /* keys defining the pseudo-random sequence */ + const unsigned long* pcrc_32_tab; + int crypt_header_size; +#endif +} curfile_info; + +typedef struct +{ + zlib_filefunc_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + linkedlist_data central_dir;/* datablock with central dir in construction*/ + int in_opened_file_inzip; /* 1 if a file in the zip is currently writ.*/ + curfile_info ci; /* info on the file curretly writing */ + + uLong begin_pos; /* position of the beginning of the zipfile */ + uLong add_position_when_writting_offset; + uLong number_entry; +#ifndef NO_ADDFILEINEXISTINGZIP + char *globalcomment; +#endif +} zip_internal; + + + +#ifndef NOCRYPT +#define INCLUDECRYPTINGCODE_IFCRYPTALLOWED +#include "crypt.h" +#endif + +local linkedlist_datablock_internal* allocate_new_datablock() +{ + linkedlist_datablock_internal* ldi; + ldi = (linkedlist_datablock_internal*) + ALLOC(sizeof(linkedlist_datablock_internal)); + if (ldi!=NULL) + { + ldi->next_datablock = NULL ; + ldi->filled_in_this_block = 0 ; + ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ; + } + return ldi; +} + +local void free_datablock(ldi) + linkedlist_datablock_internal* ldi; +{ + while (ldi!=NULL) + { + linkedlist_datablock_internal* ldinext = ldi->next_datablock; + TRYFREE(ldi); + ldi = ldinext; + } +} + +local void init_linkedlist(ll) + linkedlist_data* ll; +{ + ll->first_block = ll->last_block = NULL; +} + +local void free_linkedlist(ll) + linkedlist_data* ll; +{ + free_datablock(ll->first_block); + ll->first_block = ll->last_block = NULL; +} + + +local int add_data_in_datablock(ll,buf,len) + linkedlist_data* ll; + const void* buf; + uLong len; +{ + linkedlist_datablock_internal* ldi; + const unsigned char* from_copy; + + if (ll==NULL) + return ZIP_INTERNALERROR; + + if (ll->last_block == NULL) + { + ll->first_block = ll->last_block = allocate_new_datablock(); + if (ll->first_block == NULL) + return ZIP_INTERNALERROR; + } + + ldi = ll->last_block; + from_copy = (unsigned char*)buf; + + while (len>0) + { + uInt copy_this; + uInt i; + unsigned char* to_copy; + + if (ldi->avail_in_this_block==0) + { + ldi->next_datablock = allocate_new_datablock(); + if (ldi->next_datablock == NULL) + return ZIP_INTERNALERROR; + ldi = ldi->next_datablock ; + ll->last_block = ldi; + } + + if (ldi->avail_in_this_block < len) + copy_this = (uInt)ldi->avail_in_this_block; + else + copy_this = (uInt)len; + + to_copy = &(ldi->data[ldi->filled_in_this_block]); + + for (i=0;ifilled_in_this_block += copy_this; + ldi->avail_in_this_block -= copy_this; + from_copy += copy_this ; + len -= copy_this; + } + return ZIP_OK; +} + + + +/****************************************************************************/ + +#ifndef NO_ADDFILEINEXISTINGZIP +/* =========================================================================== + Inputs a long in LSB order to the given file + nbByte == 1, 2 or 4 (byte, short or long) +*/ + +local int ziplocal_putValue OF((const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, uLong x, int nbByte)); +local int ziplocal_putValue (pzlib_filefunc_def, filestream, x, nbByte) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong x; + int nbByte; +{ + unsigned char buf[4]; + int n; + for (n = 0; n < nbByte; n++) + { + buf[n] = (unsigned char)(x & 0xff); + x >>= 8; + } + if (x != 0) + { /* data overflow - hack for ZIP64 (X Roche) */ + for (n = 0; n < nbByte; n++) + { + buf[n] = 0xff; + } + } + + if (ZWRITE(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte) + return ZIP_ERRNO; + else + return ZIP_OK; +} + +local void ziplocal_putValue_inmemory OF((void* dest, uLong x, int nbByte)); +local void ziplocal_putValue_inmemory (dest, x, nbByte) + void* dest; + uLong x; + int nbByte; +{ + unsigned char* buf=(unsigned char*)dest; + int n; + for (n = 0; n < nbByte; n++) { + buf[n] = (unsigned char)(x & 0xff); + x >>= 8; + } + + if (x != 0) + { /* data overflow - hack for ZIP64 */ + for (n = 0; n < nbByte; n++) + { + buf[n] = 0xff; + } + } +} + +/****************************************************************************/ + + +local uLong ziplocal_TmzDateToDosDate(ptm,dosDate) + const tm_zip* ptm; + uLong dosDate; +{ + uLong year = (uLong)ptm->tm_year; + if (year>1980) + year-=1980; + else if (year>80) + year-=80; + return + (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) | + ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour)); +} + + +/****************************************************************************/ + +local int ziplocal_getByte OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + int *pi)); + +local int ziplocal_getByte(pzlib_filefunc_def,filestream,pi) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + int *pi; +{ + unsigned char c; + int err = (int)ZREAD(*pzlib_filefunc_def,filestream,&c,1); + if (err==1) + { + *pi = (int)c; + return ZIP_OK; + } + else + { + if (ZERROR(*pzlib_filefunc_def,filestream)) + return ZIP_ERRNO; + else + return ZIP_EOF; + } +} + + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets +*/ +local int ziplocal_getShort OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int ziplocal_getShort (pzlib_filefunc_def,filestream,pX) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong *pX; +{ + uLong x ; + int i; + int err; + + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==ZIP_OK) + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==ZIP_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int ziplocal_getLong OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int ziplocal_getLong (pzlib_filefunc_def,filestream,pX) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong *pX; +{ + uLong x ; + int i; + int err; + + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==ZIP_OK) + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==ZIP_OK) + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<16; + + if (err==ZIP_OK) + err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<24; + + if (err==ZIP_OK) + *pX = x; + else + *pX = 0; + return err; +} + +#ifndef BUFREADCOMMENT +#define BUFREADCOMMENT (0x400) +#endif +/* + Locate the Central directory of a zipfile (at the end, just before + the global comment) +*/ +local uLong ziplocal_SearchCentralDir OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream)); + +local uLong ziplocal_SearchCentralDir(pzlib_filefunc_def,filestream) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; +{ + unsigned char* buf; + uLong uSizeFile; + uLong uBackRead; + uLong uMaxBack=0xffff; /* maximum size of global comment */ + uLong uPosFound=0; + + if (ZSEEK(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + + uSizeFile = ZTELL(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uSizeFile-uReadPos); + if (ZSEEK(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + return uPosFound; +} +#endif /* !NO_ADDFILEINEXISTINGZIP*/ + +/************************************************************/ +extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc_def) + const char *pathname; + int append; + zipcharpc* globalcomment; + zlib_filefunc_def* pzlib_filefunc_def; +{ + zip_internal ziinit; + zip_internal* zi; + int err=ZIP_OK; + + + if (pzlib_filefunc_def==NULL) + fill_fopen_filefunc(&ziinit.z_filefunc); + else + ziinit.z_filefunc = *pzlib_filefunc_def; + + ziinit.filestream = (*(ziinit.z_filefunc.zopen_file)) + (ziinit.z_filefunc.opaque, + pathname, + (append == APPEND_STATUS_CREATE) ? + (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_CREATE) : + (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_EXISTING)); + + if (ziinit.filestream == NULL) + return NULL; + ziinit.begin_pos = ZTELL(ziinit.z_filefunc,ziinit.filestream); + ziinit.in_opened_file_inzip = 0; + ziinit.ci.stream_initialised = 0; + ziinit.number_entry = 0; + ziinit.add_position_when_writting_offset = 0; + init_linkedlist(&(ziinit.central_dir)); + + + zi = (zip_internal*)ALLOC(sizeof(zip_internal)); + if (zi==NULL) + { + ZCLOSE(ziinit.z_filefunc,ziinit.filestream); + return NULL; + } + + /* now we add file in a zipfile */ +# ifndef NO_ADDFILEINEXISTINGZIP + ziinit.globalcomment = NULL; + if (append == APPEND_STATUS_ADDINZIP) + { + uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + + uLong size_central_dir; /* size of the central directory */ + uLong offset_central_dir; /* offset of start of central directory */ + uLong central_pos,uL; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + uLong number_entry; + uLong number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + uLong size_comment; + + central_pos = ziplocal_SearchCentralDir(&ziinit.z_filefunc,ziinit.filestream); + if (central_pos==0) + err=ZIP_ERRNO; + + if (ZSEEK(ziinit.z_filefunc, ziinit.filestream, + central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=ZIP_ERRNO; + + /* the signature, already checked */ + if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&uL)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of this disk */ + if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_disk)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of the disk with the start of the central directory */ + if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_disk_with_CD)!=ZIP_OK) + err=ZIP_ERRNO; + + /* total number of entries in the central dir on this disk */ + if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_entry)!=ZIP_OK) + err=ZIP_ERRNO; + + /* total number of entries in the central dir */ + if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_entry_CD)!=ZIP_OK) + err=ZIP_ERRNO; + + if ((number_entry_CD!=number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=ZIP_BADZIPFILE; + + /* size of the central directory */ + if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&size_central_dir)!=ZIP_OK) + err=ZIP_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&offset_central_dir)!=ZIP_OK) + err=ZIP_ERRNO; + + /* zipfile global comment length */ + if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&size_comment)!=ZIP_OK) + err=ZIP_ERRNO; + + if ((central_pos0) + { + ziinit.globalcomment = ALLOC(size_comment+1); + if (ziinit.globalcomment) + { + size_comment = ZREAD(ziinit.z_filefunc, ziinit.filestream,ziinit.globalcomment,size_comment); + ziinit.globalcomment[size_comment]=0; + } + } + + byte_before_the_zipfile = central_pos - + (offset_central_dir+size_central_dir); + ziinit.add_position_when_writting_offset = byte_before_the_zipfile; + + { + uLong size_central_dir_to_read = size_central_dir; + size_t buf_size = SIZEDATA_INDATABLOCK; + void* buf_read = (void*)ALLOC(buf_size); + if (ZSEEK(ziinit.z_filefunc, ziinit.filestream, + offset_central_dir + byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET) != 0) + err=ZIP_ERRNO; + + while ((size_central_dir_to_read>0) && (err==ZIP_OK)) + { + uLong read_this = SIZEDATA_INDATABLOCK; + if (read_this > size_central_dir_to_read) + read_this = size_central_dir_to_read; + if (ZREAD(ziinit.z_filefunc, ziinit.filestream,buf_read,read_this) != read_this) + err=ZIP_ERRNO; + + if (err==ZIP_OK) + err = add_data_in_datablock(&ziinit.central_dir,buf_read, + (uLong)read_this); + size_central_dir_to_read-=read_this; + } + TRYFREE(buf_read); + } + ziinit.begin_pos = byte_before_the_zipfile; + ziinit.number_entry = number_entry_CD; + + if (ZSEEK(ziinit.z_filefunc, ziinit.filestream, + offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=ZIP_ERRNO; + } + + if (globalcomment) + { + *globalcomment = ziinit.globalcomment; + } +# endif /* !NO_ADDFILEINEXISTINGZIP*/ + + if (err != ZIP_OK) + { +# ifndef NO_ADDFILEINEXISTINGZIP + TRYFREE(ziinit.globalcomment); +# endif /* !NO_ADDFILEINEXISTINGZIP*/ + TRYFREE(zi); + return NULL; + } + else + { + *zi = ziinit; + return (zipFile)zi; + } +} + +extern zipFile ZEXPORT zipOpen (pathname, append) + const char *pathname; + int append; +{ + return zipOpen2(pathname,append,NULL,NULL); +} + +extern int ZEXPORT zipOpenNewFileInZip3 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + windowBits, memLevel, strategy, + password, crcForCrypting) + zipFile file; + const char* filename; + const zip_fileinfo* zipfi; + const void* extrafield_local; + uInt size_extrafield_local; + const void* extrafield_global; + uInt size_extrafield_global; + const char* comment; + int method; + int level; + int raw; + int windowBits; + int memLevel; + int strategy; + const char* password; + uLong crcForCrypting; +{ + zip_internal* zi; + uInt size_filename; + uInt size_comment; + uInt i; + int err = ZIP_OK; + +# ifdef NOCRYPT + if (password != NULL) + return ZIP_PARAMERROR; +# endif + + if (file == NULL) + return ZIP_PARAMERROR; + if ((method!=0) && (method!=Z_DEFLATED)) + return ZIP_PARAMERROR; + + zi = (zip_internal*)file; + + if (zi->in_opened_file_inzip == 1) + { + err = zipCloseFileInZip (file); + if (err != ZIP_OK) + return err; + } + + + if (filename==NULL) + filename="-"; + + if (comment==NULL) + size_comment = 0; + else + size_comment = (uInt)strlen(comment); + + size_filename = (uInt)strlen(filename); + + if (zipfi == NULL) + zi->ci.dosDate = 0; + else + { + if (zipfi->dosDate != 0) + zi->ci.dosDate = zipfi->dosDate; + else zi->ci.dosDate = ziplocal_TmzDateToDosDate(&zipfi->tmz_date,zipfi->dosDate); + } + + zi->ci.flag = 0; + if ((level==8) || (level==9)) + zi->ci.flag |= 2; + if ((level==2)) + zi->ci.flag |= 4; + if ((level==1)) + zi->ci.flag |= 6; + if (password != NULL) + zi->ci.flag |= 1; + + zi->ci.crc32 = 0; + zi->ci.method = method; + zi->ci.encrypt = 0; + zi->ci.stream_initialised = 0; + zi->ci.pos_in_buffered_data = 0; + zi->ci.raw = raw; + zi->ci.pos_local_header = ZTELL(zi->z_filefunc,zi->filestream) ; + zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + + size_extrafield_global + size_comment; + zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader); + + ziplocal_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4); + /* version info */ + ziplocal_putValue_inmemory(zi->ci.central_header+4,(uLong)VERSIONMADEBY,2); + ziplocal_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2); + ziplocal_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2); + ziplocal_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2); + ziplocal_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4); + ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/ + ziplocal_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/ + ziplocal_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/ + ziplocal_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2); + ziplocal_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2); + ziplocal_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2); + ziplocal_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/ + + if (zipfi==NULL) + ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2); + else + ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2); + + if (zipfi==NULL) + ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4); + else + ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4); + + ziplocal_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header- zi->add_position_when_writting_offset,4); + + for (i=0;ici.central_header+SIZECENTRALHEADER+i) = *(filename+i); + + for (i=0;ici.central_header+SIZECENTRALHEADER+size_filename+i) = + *(((const char*)extrafield_global)+i); + + for (i=0;ici.central_header+SIZECENTRALHEADER+size_filename+ + size_extrafield_global+i) = *(comment+i); + if (zi->ci.central_header == NULL) + return ZIP_INTERNALERROR; + + /* write the local header */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)LOCALHEADERMAGIC,4); + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)20,2);/* version needed to extract */ + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.flag,2); + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.method,2); + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.dosDate,4); + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* crc 32, unknown */ + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* compressed size, unknown */ + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* uncompressed size, unknown */ + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_filename,2); + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_extrafield_local,2); + + if ((err==ZIP_OK) && (size_filename>0)) + if (ZWRITE(zi->z_filefunc,zi->filestream,filename,size_filename)!=size_filename) + err = ZIP_ERRNO; + + if ((err==ZIP_OK) && (size_extrafield_local>0)) + if (ZWRITE(zi->z_filefunc,zi->filestream,extrafield_local,size_extrafield_local) + !=size_extrafield_local) + err = ZIP_ERRNO; + + zi->ci.stream.avail_in = (uInt)0; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + zi->ci.stream.total_in = 0; + zi->ci.stream.total_out = 0; + + if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + zi->ci.stream.zalloc = (alloc_func)0; + zi->ci.stream.zfree = (free_func)0; + zi->ci.stream.opaque = (voidpf)0; + + if (windowBits>0) + windowBits = -windowBits; + + err = deflateInit2(&zi->ci.stream, level, + Z_DEFLATED, windowBits, memLevel, strategy); + + if (err==Z_OK) + zi->ci.stream_initialised = 1; + } +# ifndef NOCRYPT + zi->ci.crypt_header_size = 0; + if ((err==Z_OK) && (password != NULL)) + { + unsigned char bufHead[RAND_HEAD_LEN]; + unsigned int sizeHead; + zi->ci.encrypt = 1; + zi->ci.pcrc_32_tab = get_crc_table(); + /*init_keys(password,zi->ci.keys,zi->ci.pcrc_32_tab);*/ + + sizeHead=crypthead(password,bufHead,RAND_HEAD_LEN,zi->ci.keys,zi->ci.pcrc_32_tab,crcForCrypting); + zi->ci.crypt_header_size = sizeHead; + + if (ZWRITE(zi->z_filefunc,zi->filestream,bufHead,sizeHead) != sizeHead) + err = ZIP_ERRNO; + } +# endif + + if (err==Z_OK) + zi->in_opened_file_inzip = 1; + return err; +} + +extern int ZEXPORT zipOpenNewFileInZip2(file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw) + zipFile file; + const char* filename; + const zip_fileinfo* zipfi; + const void* extrafield_local; + uInt size_extrafield_local; + const void* extrafield_global; + uInt size_extrafield_global; + const char* comment; + int method; + int level; + int raw; +{ + return zipOpenNewFileInZip3 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + NULL, 0); +} + +extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level) + zipFile file; + const char* filename; + const zip_fileinfo* zipfi; + const void* extrafield_local; + uInt size_extrafield_local; + const void* extrafield_global; + uInt size_extrafield_global; + const char* comment; + int method; + int level; +{ + return zipOpenNewFileInZip2 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, 0); +} + +local int zipFlushWriteBuffer(zi) + zip_internal* zi; +{ + int err=ZIP_OK; + + if (zi->ci.encrypt != 0) + { +#ifndef NOCRYPT + uInt i; + int t; + for (i=0;ici.pos_in_buffered_data;i++) + zi->ci.buffered_data[i] = zencode(zi->ci.keys, zi->ci.pcrc_32_tab, + zi->ci.buffered_data[i],t); +#endif + } + if (ZWRITE(zi->z_filefunc,zi->filestream,zi->ci.buffered_data,zi->ci.pos_in_buffered_data) + !=zi->ci.pos_in_buffered_data) + err = ZIP_ERRNO; + zi->ci.pos_in_buffered_data = 0; + return err; +} + +extern int ZEXPORT zipWriteInFileInZip (file, buf, len) + zipFile file; + const void* buf; + unsigned len; +{ + zip_internal* zi; + int err=ZIP_OK; + + if (file == NULL) + return ZIP_PARAMERROR; + zi = (zip_internal*)file; + + if (zi->in_opened_file_inzip == 0) + return ZIP_PARAMERROR; + + zi->ci.stream.next_in = (void*)buf; + zi->ci.stream.avail_in = len; + zi->ci.crc32 = crc32(zi->ci.crc32,buf,len); + + while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0)) + { + if (zi->ci.stream.avail_out == 0) + { + if (zipFlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + } + + + if(err != ZIP_OK) + break; + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + uLong uTotalOutBefore = zi->ci.stream.total_out; + err=deflate(&zi->ci.stream, Z_NO_FLUSH); + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ; + + } + else + { + uInt copy_this,i; + if (zi->ci.stream.avail_in < zi->ci.stream.avail_out) + copy_this = zi->ci.stream.avail_in; + else + copy_this = zi->ci.stream.avail_out; + for (i=0;ici.stream.next_out)+i) = + *(((const char*)zi->ci.stream.next_in)+i); + { + zi->ci.stream.avail_in -= copy_this; + zi->ci.stream.avail_out-= copy_this; + zi->ci.stream.next_in+= copy_this; + zi->ci.stream.next_out+= copy_this; + zi->ci.stream.total_in+= copy_this; + zi->ci.stream.total_out+= copy_this; + zi->ci.pos_in_buffered_data += copy_this; + } + } + } + + return err; +} + +extern int ZEXPORT zipCloseFileInZipRaw (file, uncompressed_size, crc32) + zipFile file; + uLong uncompressed_size; + uLong crc32; +{ + zip_internal* zi; + uLong compressed_size; + int err=ZIP_OK; + + if (file == NULL) + return ZIP_PARAMERROR; + zi = (zip_internal*)file; + + if (zi->in_opened_file_inzip == 0) + return ZIP_PARAMERROR; + zi->ci.stream.avail_in = 0; + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + while (err==ZIP_OK) + { + uLong uTotalOutBefore; + if (zi->ci.stream.avail_out == 0) + { + if (zipFlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + } + uTotalOutBefore = zi->ci.stream.total_out; + err=deflate(&zi->ci.stream, Z_FINISH); + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ; + } + + if (err==Z_STREAM_END) + err=ZIP_OK; /* this is normal */ + + if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK)) + if (zipFlushWriteBuffer(zi)==ZIP_ERRNO) + err = ZIP_ERRNO; + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + err=deflateEnd(&zi->ci.stream); + zi->ci.stream_initialised = 0; + } + + if (!zi->ci.raw) + { + crc32 = (uLong)zi->ci.crc32; + uncompressed_size = (uLong)zi->ci.stream.total_in; + } + compressed_size = (uLong)zi->ci.stream.total_out; +# ifndef NOCRYPT + compressed_size += zi->ci.crypt_header_size; +# endif + + ziplocal_putValue_inmemory(zi->ci.central_header+16,crc32,4); /*crc*/ + ziplocal_putValue_inmemory(zi->ci.central_header+20, + compressed_size,4); /*compr size*/ + if (zi->ci.stream.data_type == Z_ASCII) + ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)Z_ASCII,2); + ziplocal_putValue_inmemory(zi->ci.central_header+24, + uncompressed_size,4); /*uncompr size*/ + + if (err==ZIP_OK) + err = add_data_in_datablock(&zi->central_dir,zi->ci.central_header, + (uLong)zi->ci.size_centralheader); + free(zi->ci.central_header); + + if (err==ZIP_OK) + { + long cur_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream); + if (ZSEEK(zi->z_filefunc,zi->filestream, + zi->ci.pos_local_header + 14,ZLIB_FILEFUNC_SEEK_SET)!=0) + err = ZIP_ERRNO; + + if (err==ZIP_OK) + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,crc32,4); /* crc 32, unknown */ + + if (err==ZIP_OK) /* compressed size, unknown */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,compressed_size,4); + + if (err==ZIP_OK) /* uncompressed size, unknown */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,uncompressed_size,4); + + if (ZSEEK(zi->z_filefunc,zi->filestream, + cur_pos_inzip,ZLIB_FILEFUNC_SEEK_SET)!=0) + err = ZIP_ERRNO; + } + + zi->number_entry ++; + zi->in_opened_file_inzip = 0; + + return err; +} + +extern int ZEXPORT zipCloseFileInZip (file) + zipFile file; +{ + return zipCloseFileInZipRaw (file,0,0); +} + +extern int ZEXPORT zipClose (file, global_comment) + zipFile file; + const char* global_comment; +{ + zip_internal* zi; + int err = 0; + uLong size_centraldir = 0; + uLong centraldir_pos_inzip; + uInt size_global_comment; + if (file == NULL) + return ZIP_PARAMERROR; + zi = (zip_internal*)file; + + if (zi->in_opened_file_inzip == 1) + { + err = zipCloseFileInZip (file); + } + +#ifndef NO_ADDFILEINEXISTINGZIP + if (global_comment==NULL) + global_comment = zi->globalcomment; +#endif + if (global_comment==NULL) + size_global_comment = 0; + else + size_global_comment = (uInt)strlen(global_comment); + + centraldir_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream); + if (err==ZIP_OK) + { + linkedlist_datablock_internal* ldi = zi->central_dir.first_block ; + while (ldi!=NULL) + { + if ((err==ZIP_OK) && (ldi->filled_in_this_block>0)) + if (ZWRITE(zi->z_filefunc,zi->filestream, + ldi->data,ldi->filled_in_this_block) + !=ldi->filled_in_this_block ) + err = ZIP_ERRNO; + + size_centraldir += ldi->filled_in_this_block; + ldi = ldi->next_datablock; + } + } + free_datablock(zi->central_dir.first_block); + + if (err==ZIP_OK) /* Magic End */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)ENDHEADERMAGIC,4); + + if (err==ZIP_OK) /* number of this disk */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2); + + if (err==ZIP_OK) /* number of the disk with the start of the central directory */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2); + + if (err==ZIP_OK) /* total number of entries in the central dir on this disk */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2); + + if (err==ZIP_OK) /* total number of entries in the central dir */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2); + + if (err==ZIP_OK) /* size of the central directory */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_centraldir,4); + + if (err==ZIP_OK) /* offset of start of central directory with respect to the + starting disk number */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream, + (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4); + + if (err==ZIP_OK) /* zipfile comment length */ + err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_global_comment,2); + + if ((err==ZIP_OK) && (size_global_comment>0)) + if (ZWRITE(zi->z_filefunc,zi->filestream, + global_comment,size_global_comment) != size_global_comment) + err = ZIP_ERRNO; + + if (ZCLOSE(zi->z_filefunc,zi->filestream) != 0) + if (err == ZIP_OK) + err = ZIP_ERRNO; + +#ifndef NO_ADDFILEINEXISTINGZIP + TRYFREE(zi->globalcomment); +#endif + TRYFREE(zi); + + return err; +} diff --git a/common/dist/zlib/contrib/minizip/zip.h b/common/dist/zlib/contrib/minizip/zip.h new file mode 100644 index 000000000..b9119980d --- /dev/null +++ b/common/dist/zlib/contrib/minizip/zip.h @@ -0,0 +1,237 @@ +/* $NetBSD: zip.h,v 1.1.1.1 2006/01/14 20:11:01 christos Exp $ */ + +/* zip.h -- IO for compress .zip files using zlib + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant + + This unzip package allow creates .ZIP file, compatible with PKZip 2.04g + WinZip, InfoZip tools and compatible. + Multi volume ZipFile (span) are not supported. + Encryption compatible with pkzip 2.04g only supported + Old compressions used by old PKZip 1.x are not supported + + For uncompress .zip file, look at unzip.h + + + I WAIT FEEDBACK at mail info@winimage.com + Visit also http://www.winimage.com/zLibDll/unzip.html for evolution + + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + +*/ + +/* for more info about .ZIP format, see + http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip + http://www.info-zip.org/pub/infozip/doc/ + PkWare has also a specification at : + ftp://ftp.pkware.com/probdesc.zip +*/ + +#ifndef _zip_H +#define _zip_H + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#ifndef _ZLIBIOAPI_H +#include "ioapi.h" +#endif + +#if defined(STRICTZIP) || defined(STRICTZIPUNZIP) +/* like the STRICT of WIN32, we define a pointer that cannot be converted + from (void*) without cast */ +typedef struct TagzipFile__ { int unused; } zipFile__; +typedef zipFile__ *zipFile; +#else +typedef voidp zipFile; +#endif + +#define ZIP_OK (0) +#define ZIP_EOF (0) +#define ZIP_ERRNO (Z_ERRNO) +#define ZIP_PARAMERROR (-102) +#define ZIP_BADZIPFILE (-103) +#define ZIP_INTERNALERROR (-104) + +#ifndef DEF_MEM_LEVEL +# if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +# else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +# endif +#endif +/* default memLevel */ + +/* tm_zip contain date/time info */ +typedef struct tm_zip_s +{ + uInt tm_sec; /* seconds after the minute - [0,59] */ + uInt tm_min; /* minutes after the hour - [0,59] */ + uInt tm_hour; /* hours since midnight - [0,23] */ + uInt tm_mday; /* day of the month - [1,31] */ + uInt tm_mon; /* months since January - [0,11] */ + uInt tm_year; /* years - [1980..2044] */ +} tm_zip; + +typedef struct +{ + tm_zip tmz_date; /* date in understandable format */ + uLong dosDate; /* if dos_date == 0, tmu_date is used */ +/* uLong flag; */ /* general purpose bit flag 2 bytes */ + + uLong internal_fa; /* internal file attributes 2 bytes */ + uLong external_fa; /* external file attributes 4 bytes */ +} zip_fileinfo; + +typedef const char* zipcharpc; + + +#define APPEND_STATUS_CREATE (0) +#define APPEND_STATUS_CREATEAFTER (1) +#define APPEND_STATUS_ADDINZIP (2) + +extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append)); +/* + Create a zipfile. + pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on + an Unix computer "zlib/zlib113.zip". + if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip + will be created at the end of the file. + (useful if the file contain a self extractor code) + if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will + add files in existing zip (be sure you don't add file that doesn't exist) + If the zipfile cannot be opened, the return value is NULL. + Else, the return value is a zipFile Handle, usable with other function + of this zip package. +*/ + +/* Note : there is no delete function into a zipfile. + If you want delete file into a zipfile, you must open a zipfile, and create another + Of couse, you can use RAW reading and writing to copy the file you did not want delte +*/ + +extern zipFile ZEXPORT zipOpen2 OF((const char *pathname, + int append, + zipcharpc* globalcomment, + zlib_filefunc_def* pzlib_filefunc_def)); + +extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level)); +/* + Open a file in the ZIP for writing. + filename : the filename in zip (if NULL, '-' without quote will be used + *zipfi contain supplemental information + if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local + contains the extrafield data the the local header + if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global + contains the extrafield data the the local header + if comment != NULL, comment contain the comment string + method contain the compression method (0 for store, Z_DEFLATED for deflate) + level contain the level of compression (can be Z_DEFAULT_COMPRESSION) +*/ + + +extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw)); + +/* + Same than zipOpenNewFileInZip, except if raw=1, we write raw file + */ + +extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int windowBits, + int memLevel, + int strategy, + const char* password, + uLong crcForCtypting)); + +/* + Same than zipOpenNewFileInZip2, except + windowBits,memLevel,,strategy : see parameter strategy in deflateInit2 + password : crypting password (NULL for no crypting) + crcForCtypting : crc of file to compress (needed for crypting) + */ + + +extern int ZEXPORT zipWriteInFileInZip OF((zipFile file, + const void* buf, + unsigned len)); +/* + Write data in the zipfile +*/ + +extern int ZEXPORT zipCloseFileInZip OF((zipFile file)); +/* + Close the current file in the zipfile +*/ + +extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file, + uLong uncompressed_size, + uLong crc32)); +/* + Close the current file in the zipfile, for fiel opened with + parameter raw=1 in zipOpenNewFileInZip2 + uncompressed_size and crc32 are value for the uncompressed size +*/ + +extern int ZEXPORT zipClose OF((zipFile file, + const char* global_comment)); +/* + Close the zipfile +*/ + +#ifdef __cplusplus +} +#endif + +#endif /* _zip_H */ diff --git a/common/dist/zlib/contrib/pascal/example.pas b/common/dist/zlib/contrib/pascal/example.pas new file mode 100644 index 000000000..5518b36a7 --- /dev/null +++ b/common/dist/zlib/contrib/pascal/example.pas @@ -0,0 +1,599 @@ +(* example.c -- usage example of the zlib compression library + * Copyright (C) 1995-2003 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Pascal translation + * Copyright (C) 1998 by Jacques Nomssi Nzali. + * For conditions of distribution and use, see copyright notice in readme.txt + * + * Adaptation to the zlibpas interface + * Copyright (C) 2003 by Cosmin Truta. + * For conditions of distribution and use, see copyright notice in readme.txt + *) + +program example; + +{$DEFINE TEST_COMPRESS} +{DO NOT $DEFINE TEST_GZIO} +{$DEFINE TEST_DEFLATE} +{$DEFINE TEST_INFLATE} +{$DEFINE TEST_FLUSH} +{$DEFINE TEST_SYNC} +{$DEFINE TEST_DICT} + +uses SysUtils, zlibpas; + +const TESTFILE = 'foo.gz'; + +(* "hello world" would be more standard, but the repeated "hello" + * stresses the compression code better, sorry... + *) +const hello: PChar = 'hello, hello!'; + +const dictionary: PChar = 'hello'; + +var dictId: LongInt; (* Adler32 value of the dictionary *) + +procedure CHECK_ERR(err: Integer; msg: String); +begin + if err <> Z_OK then + begin + WriteLn(msg, ' error: ', err); + Halt(1); + end; +end; + +procedure EXIT_ERR(const msg: String); +begin + WriteLn('Error: ', msg); + Halt(1); +end; + +(* =========================================================================== + * Test compress and uncompress + *) +{$IFDEF TEST_COMPRESS} +procedure test_compress(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var err: Integer; + len: LongInt; +begin + len := StrLen(hello)+1; + + err := compress(compr, comprLen, hello, len); + CHECK_ERR(err, 'compress'); + + StrCopy(PChar(uncompr), 'garbage'); + + err := uncompress(uncompr, uncomprLen, compr, comprLen); + CHECK_ERR(err, 'uncompress'); + + if StrComp(PChar(uncompr), hello) <> 0 then + EXIT_ERR('bad uncompress') + else + WriteLn('uncompress(): ', PChar(uncompr)); +end; +{$ENDIF} + +(* =========================================================================== + * Test read/write of .gz files + *) +{$IFDEF TEST_GZIO} +procedure test_gzio(const fname: PChar; (* compressed file name *) + uncompr: Pointer; + uncomprLen: LongInt); +var err: Integer; + len: Integer; + zfile: gzFile; + pos: LongInt; +begin + len := StrLen(hello)+1; + + zfile := gzopen(fname, 'wb'); + if zfile = NIL then + begin + WriteLn('gzopen error'); + Halt(1); + end; + gzputc(zfile, 'h'); + if gzputs(zfile, 'ello') <> 4 then + begin + WriteLn('gzputs err: ', gzerror(zfile, err)); + Halt(1); + end; + {$IFDEF GZ_FORMAT_STRING} + if gzprintf(zfile, ', %s!', 'hello') <> 8 then + begin + WriteLn('gzprintf err: ', gzerror(zfile, err)); + Halt(1); + end; + {$ELSE} + if gzputs(zfile, ', hello!') <> 8 then + begin + WriteLn('gzputs err: ', gzerror(zfile, err)); + Halt(1); + end; + {$ENDIF} + gzseek(zfile, 1, SEEK_CUR); (* add one zero byte *) + gzclose(zfile); + + zfile := gzopen(fname, 'rb'); + if zfile = NIL then + begin + WriteLn('gzopen error'); + Halt(1); + end; + + StrCopy(PChar(uncompr), 'garbage'); + + if gzread(zfile, uncompr, uncomprLen) <> len then + begin + WriteLn('gzread err: ', gzerror(zfile, err)); + Halt(1); + end; + if StrComp(PChar(uncompr), hello) <> 0 then + begin + WriteLn('bad gzread: ', PChar(uncompr)); + Halt(1); + end + else + WriteLn('gzread(): ', PChar(uncompr)); + + pos := gzseek(zfile, -8, SEEK_CUR); + if (pos <> 6) or (gztell(zfile) <> pos) then + begin + WriteLn('gzseek error, pos=', pos, ', gztell=', gztell(zfile)); + Halt(1); + end; + + if gzgetc(zfile) <> ' ' then + begin + WriteLn('gzgetc error'); + Halt(1); + end; + + if gzungetc(' ', zfile) <> ' ' then + begin + WriteLn('gzungetc error'); + Halt(1); + end; + + gzgets(zfile, PChar(uncompr), uncomprLen); + uncomprLen := StrLen(PChar(uncompr)); + if uncomprLen <> 7 then (* " hello!" *) + begin + WriteLn('gzgets err after gzseek: ', gzerror(zfile, err)); + Halt(1); + end; + if StrComp(PChar(uncompr), hello + 6) <> 0 then + begin + WriteLn('bad gzgets after gzseek'); + Halt(1); + end + else + WriteLn('gzgets() after gzseek: ', PChar(uncompr)); + + gzclose(zfile); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with small buffers + *) +{$IFDEF TEST_DEFLATE} +procedure test_deflate(compr: Pointer; comprLen: LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; + len: LongInt; +begin + len := StrLen(hello)+1; + + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, 'deflateInit'); + + c_stream.next_in := hello; + c_stream.next_out := compr; + + while (c_stream.total_in <> len) and + (c_stream.total_out < comprLen) do + begin + c_stream.avail_out := 1; { force small buffers } + c_stream.avail_in := 1; + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + end; + + (* Finish the stream, still forcing small buffers: *) + while TRUE do + begin + c_stream.avail_out := 1; + err := deflate(c_stream, Z_FINISH); + if err = Z_STREAM_END then + break; + CHECK_ERR(err, 'deflate'); + end; + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); +end; +{$ENDIF} + +(* =========================================================================== + * Test inflate with small buffers + *) +{$IFDEF TEST_INFLATE} +procedure test_inflate(compr: Pointer; comprLen : LongInt; + uncompr: Pointer; uncomprLen : LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := 0; + d_stream.next_out := uncompr; + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + while (d_stream.total_out < uncomprLen) and + (d_stream.total_in < comprLen) do + begin + d_stream.avail_out := 1; (* force small buffers *) + d_stream.avail_in := 1; + err := inflate(d_stream, Z_NO_FLUSH); + if err = Z_STREAM_END then + break; + CHECK_ERR(err, 'inflate'); + end; + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + if StrComp(PChar(uncompr), hello) <> 0 then + EXIT_ERR('bad inflate') + else + WriteLn('inflate(): ', PChar(uncompr)); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with large buffers and dynamic change of compression level + *) +{$IFDEF TEST_DEFLATE} +procedure test_large_deflate(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; +begin + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_BEST_SPEED); + CHECK_ERR(err, 'deflateInit'); + + c_stream.next_out := compr; + c_stream.avail_out := Integer(comprLen); + + (* At this point, uncompr is still mostly zeroes, so it should compress + * very well: + *) + c_stream.next_in := uncompr; + c_stream.avail_in := Integer(uncomprLen); + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + if c_stream.avail_in <> 0 then + EXIT_ERR('deflate not greedy'); + + (* Feed in already compressed data and switch to no compression: *) + deflateParams(c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); + c_stream.next_in := compr; + c_stream.avail_in := Integer(comprLen div 2); + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + + (* Switch back to compressing mode: *) + deflateParams(c_stream, Z_BEST_COMPRESSION, Z_FILTERED); + c_stream.next_in := uncompr; + c_stream.avail_in := Integer(uncomprLen); + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + + err := deflate(c_stream, Z_FINISH); + if err <> Z_STREAM_END then + EXIT_ERR('deflate should report Z_STREAM_END'); + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); +end; +{$ENDIF} + +(* =========================================================================== + * Test inflate with large buffers + *) +{$IFDEF TEST_INFLATE} +procedure test_large_inflate(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := Integer(comprLen); + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + while TRUE do + begin + d_stream.next_out := uncompr; (* discard the output *) + d_stream.avail_out := Integer(uncomprLen); + err := inflate(d_stream, Z_NO_FLUSH); + if err = Z_STREAM_END then + break; + CHECK_ERR(err, 'large inflate'); + end; + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + if d_stream.total_out <> 2 * uncomprLen + comprLen div 2 then + begin + WriteLn('bad large inflate: ', d_stream.total_out); + Halt(1); + end + else + WriteLn('large_inflate(): OK'); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with full flush + *) +{$IFDEF TEST_FLUSH} +procedure test_flush(compr: Pointer; var comprLen : LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; + len: Integer; +begin + len := StrLen(hello)+1; + + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, 'deflateInit'); + + c_stream.next_in := hello; + c_stream.next_out := compr; + c_stream.avail_in := 3; + c_stream.avail_out := Integer(comprLen); + err := deflate(c_stream, Z_FULL_FLUSH); + CHECK_ERR(err, 'deflate'); + + Inc(PByteArray(compr)^[3]); (* force an error in first compressed block *) + c_stream.avail_in := len - 3; + + err := deflate(c_stream, Z_FINISH); + if err <> Z_STREAM_END then + CHECK_ERR(err, 'deflate'); + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); + + comprLen := c_stream.total_out; +end; +{$ENDIF} + +(* =========================================================================== + * Test inflateSync() + *) +{$IFDEF TEST_SYNC} +procedure test_sync(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen : LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := 2; (* just read the zlib header *) + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + d_stream.next_out := uncompr; + d_stream.avail_out := Integer(uncomprLen); + + inflate(d_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'inflate'); + + d_stream.avail_in := Integer(comprLen-2); (* read all compressed data *) + err := inflateSync(d_stream); (* but skip the damaged part *) + CHECK_ERR(err, 'inflateSync'); + + err := inflate(d_stream, Z_FINISH); + if err <> Z_DATA_ERROR then + EXIT_ERR('inflate should report DATA_ERROR'); + (* Because of incorrect adler32 *) + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + WriteLn('after inflateSync(): hel', PChar(uncompr)); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with preset dictionary + *) +{$IFDEF TEST_DICT} +procedure test_dict_deflate(compr: Pointer; comprLen: LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; +begin + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_BEST_COMPRESSION); + CHECK_ERR(err, 'deflateInit'); + + err := deflateSetDictionary(c_stream, dictionary, StrLen(dictionary)); + CHECK_ERR(err, 'deflateSetDictionary'); + + dictId := c_stream.adler; + c_stream.next_out := compr; + c_stream.avail_out := Integer(comprLen); + + c_stream.next_in := hello; + c_stream.avail_in := StrLen(hello)+1; + + err := deflate(c_stream, Z_FINISH); + if err <> Z_STREAM_END then + EXIT_ERR('deflate should report Z_STREAM_END'); + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); +end; +{$ENDIF} + +(* =========================================================================== + * Test inflate with a preset dictionary + *) +{$IFDEF TEST_DICT} +procedure test_dict_inflate(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := Integer(comprLen); + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + d_stream.next_out := uncompr; + d_stream.avail_out := Integer(uncomprLen); + + while TRUE do + begin + err := inflate(d_stream, Z_NO_FLUSH); + if err = Z_STREAM_END then + break; + if err = Z_NEED_DICT then + begin + if d_stream.adler <> dictId then + EXIT_ERR('unexpected dictionary'); + err := inflateSetDictionary(d_stream, dictionary, StrLen(dictionary)); + end; + CHECK_ERR(err, 'inflate with dict'); + end; + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + if StrComp(PChar(uncompr), hello) <> 0 then + EXIT_ERR('bad inflate with dict') + else + WriteLn('inflate with dictionary: ', PChar(uncompr)); +end; +{$ENDIF} + +var compr, uncompr: Pointer; + comprLen, uncomprLen: LongInt; + +begin + if zlibVersion^ <> ZLIB_VERSION[1] then + EXIT_ERR('Incompatible zlib version'); + + WriteLn('zlib version: ', zlibVersion); + WriteLn('zlib compile flags: ', Format('0x%x', [zlibCompileFlags])); + + comprLen := 10000 * SizeOf(Integer); (* don't overflow on MSDOS *) + uncomprLen := comprLen; + GetMem(compr, comprLen); + GetMem(uncompr, uncomprLen); + if (compr = NIL) or (uncompr = NIL) then + EXIT_ERR('Out of memory'); + (* compr and uncompr are cleared to avoid reading uninitialized + * data and to ensure that uncompr compresses well. + *) + FillChar(compr^, comprLen, 0); + FillChar(uncompr^, uncomprLen, 0); + + {$IFDEF TEST_COMPRESS} + WriteLn('** Testing compress'); + test_compress(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_GZIO} + WriteLn('** Testing gzio'); + if ParamCount >= 1 then + test_gzio(ParamStr(1), uncompr, uncomprLen) + else + test_gzio(TESTFILE, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_DEFLATE} + WriteLn('** Testing deflate with small buffers'); + test_deflate(compr, comprLen); + {$ENDIF} + {$IFDEF TEST_INFLATE} + WriteLn('** Testing inflate with small buffers'); + test_inflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_DEFLATE} + WriteLn('** Testing deflate with large buffers'); + test_large_deflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + {$IFDEF TEST_INFLATE} + WriteLn('** Testing inflate with large buffers'); + test_large_inflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_FLUSH} + WriteLn('** Testing deflate with full flush'); + test_flush(compr, comprLen); + {$ENDIF} + {$IFDEF TEST_SYNC} + WriteLn('** Testing inflateSync'); + test_sync(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + comprLen := uncomprLen; + + {$IFDEF TEST_DICT} + WriteLn('** Testing deflate and inflate with preset dictionary'); + test_dict_deflate(compr, comprLen); + test_dict_inflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + FreeMem(compr, comprLen); + FreeMem(uncompr, uncomprLen); +end. diff --git a/common/dist/zlib/contrib/pascal/readme.txt b/common/dist/zlib/contrib/pascal/readme.txt new file mode 100644 index 000000000..60e87c8a3 --- /dev/null +++ b/common/dist/zlib/contrib/pascal/readme.txt @@ -0,0 +1,76 @@ + +This directory contains a Pascal (Delphi, Kylix) interface to the +zlib data compression library. + + +Directory listing +================= + +zlibd32.mak makefile for Borland C++ +example.pas usage example of zlib +zlibpas.pas the Pascal interface to zlib +readme.txt this file + + +Compatibility notes +=================== + +- Although the name "zlib" would have been more normal for the + zlibpas unit, this name is already taken by Borland's ZLib unit. + This is somehow unfortunate, because that unit is not a genuine + interface to the full-fledged zlib functionality, but a suite of + class wrappers around zlib streams. Other essential features, + such as checksums, are missing. + It would have been more appropriate for that unit to have a name + like "ZStreams", or something similar. + +- The C and zlib-supplied types int, uInt, long, uLong, etc. are + translated directly into Pascal types of similar sizes (Integer, + LongInt, etc.), to avoid namespace pollution. In particular, + there is no conversion of unsigned int into a Pascal unsigned + integer. The Word type is non-portable and has the same size + (16 bits) both in a 16-bit and in a 32-bit environment, unlike + Integer. Even if there is a 32-bit Cardinal type, there is no + real need for unsigned int in zlib under a 32-bit environment. + +- Except for the callbacks, the zlib function interfaces are + assuming the calling convention normally used in Pascal + (__pascal for DOS and Windows16, __fastcall for Windows32). + Since the cdecl keyword is used, the old Turbo Pascal does + not work with this interface. + +- The gz* function interfaces are not translated, to avoid + interfacing problems with the C runtime library. Besides, + gzprintf(gzFile file, const char *format, ...) + cannot be translated into Pascal. + + +Legal issues +============ + +The zlibpas interface is: + Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler. + Copyright (C) 1998 by Bob Dellaca. + Copyright (C) 2003 by Cosmin Truta. + +The example program is: + Copyright (C) 1995-2003 by Jean-loup Gailly. + Copyright (C) 1998,1999,2000 by Jacques Nomssi Nzali. + Copyright (C) 2003 by Cosmin Truta. + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + diff --git a/common/dist/zlib/contrib/pascal/zlibd32.mak b/common/dist/zlib/contrib/pascal/zlibd32.mak new file mode 100644 index 000000000..88fafa0b1 --- /dev/null +++ b/common/dist/zlib/contrib/pascal/zlibd32.mak @@ -0,0 +1,93 @@ +# Makefile for zlib +# For use with Delphi and C++ Builder under Win32 +# Updated for zlib 1.2.x by Cosmin Truta + +# ------------ Borland C++ ------------ + +# This project uses the Delphi (fastcall/register) calling convention: +LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl + +CC = bcc32 +LD = bcc32 +AR = tlib +# do not use "-pr" in CFLAGS +CFLAGS = -a -d -k- -O2 $(LOC) +LDFLAGS = + + +# variables +ZLIB_LIB = zlib.lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj +OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj +OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzio.obj: gzio.c zutil.h zlib.h zconf.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: example.c zlib.h zconf.h + +minigzip.obj: minigzip.c zlib.h zconf.h + + +# For the sake of the old Borland make, +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + + +# cleanup +clean: + -del *.obj + -del *.exe + -del *.lib + -del *.tds + -del zlib.bak + -del foo.gz + diff --git a/common/dist/zlib/contrib/pascal/zlibpas.pas b/common/dist/zlib/contrib/pascal/zlibpas.pas new file mode 100644 index 000000000..836848c2b --- /dev/null +++ b/common/dist/zlib/contrib/pascal/zlibpas.pas @@ -0,0 +1,236 @@ +(* zlibpas -- Pascal interface to the zlib data compression library + * + * Copyright (C) 2003 Cosmin Truta. + * Derived from original sources by Bob Dellaca. + * For conditions of distribution and use, see copyright notice in readme.txt + *) + +unit zlibpas; + +interface + +const + ZLIB_VERSION = '1.2.3'; + +type + alloc_func = function(opaque: Pointer; items, size: Integer): Pointer; + cdecl; + free_func = procedure(opaque, address: Pointer); + cdecl; + + in_func = function(opaque: Pointer; var buf: PByte): Integer; + cdecl; + out_func = function(opaque: Pointer; buf: PByte; size: Integer): Integer; + cdecl; + + z_streamp = ^z_stream; + z_stream = packed record + next_in: PChar; (* next input byte *) + avail_in: Integer; (* number of bytes available at next_in *) + total_in: LongInt; (* total nb of input bytes read so far *) + + next_out: PChar; (* next output byte should be put there *) + avail_out: Integer; (* remaining free space at next_out *) + total_out: LongInt; (* total nb of bytes output so far *) + + msg: PChar; (* last error message, NULL if no error *) + state: Pointer; (* not visible by applications *) + + zalloc: alloc_func; (* used to allocate the internal state *) + zfree: free_func; (* used to free the internal state *) + opaque: Pointer; (* private data object passed to zalloc and zfree *) + + data_type: Integer; (* best guess about the data type: ascii or binary *) + adler: LongInt; (* adler32 value of the uncompressed data *) + reserved: LongInt; (* reserved for future use *) + end; + +(* constants *) +const + Z_NO_FLUSH = 0; + Z_PARTIAL_FLUSH = 1; + Z_SYNC_FLUSH = 2; + Z_FULL_FLUSH = 3; + Z_FINISH = 4; + + Z_OK = 0; + Z_STREAM_END = 1; + Z_NEED_DICT = 2; + Z_ERRNO = -1; + Z_STREAM_ERROR = -2; + Z_DATA_ERROR = -3; + Z_MEM_ERROR = -4; + Z_BUF_ERROR = -5; + Z_VERSION_ERROR = -6; + + Z_NO_COMPRESSION = 0; + Z_BEST_SPEED = 1; + Z_BEST_COMPRESSION = 9; + Z_DEFAULT_COMPRESSION = -1; + + Z_FILTERED = 1; + Z_HUFFMAN_ONLY = 2; + Z_RLE = 3; + Z_DEFAULT_STRATEGY = 0; + + Z_BINARY = 0; + Z_ASCII = 1; + Z_UNKNOWN = 2; + + Z_DEFLATED = 8; + +(* basic functions *) +function zlibVersion: PChar; +function deflateInit(var strm: z_stream; level: Integer): Integer; +function deflate(var strm: z_stream; flush: Integer): Integer; +function deflateEnd(var strm: z_stream): Integer; +function inflateInit(var strm: z_stream): Integer; +function inflate(var strm: z_stream; flush: Integer): Integer; +function inflateEnd(var strm: z_stream): Integer; + +(* advanced functions *) +function deflateInit2(var strm: z_stream; level, method, windowBits, + memLevel, strategy: Integer): Integer; +function deflateSetDictionary(var strm: z_stream; const dictionary: PChar; + dictLength: Integer): Integer; +function deflateCopy(var dest, source: z_stream): Integer; +function deflateReset(var strm: z_stream): Integer; +function deflateParams(var strm: z_stream; level, strategy: Integer): Integer; +function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt; +function deflatePrime(var strm: z_stream; bits, value: Integer): Integer; +function inflateInit2(var strm: z_stream; windowBits: Integer): Integer; +function inflateSetDictionary(var strm: z_stream; const dictionary: PChar; + dictLength: Integer): Integer; +function inflateSync(var strm: z_stream): Integer; +function inflateCopy(var dest, source: z_stream): Integer; +function inflateReset(var strm: z_stream): Integer; +function inflateBackInit(var strm: z_stream; + windowBits: Integer; window: PChar): Integer; +function inflateBack(var strm: z_stream; in_fn: in_func; in_desc: Pointer; + out_fn: out_func; out_desc: Pointer): Integer; +function inflateBackEnd(var strm: z_stream): Integer; +function zlibCompileFlags: LongInt; + +(* utility functions *) +function compress(dest: PChar; var destLen: LongInt; + const source: PChar; sourceLen: LongInt): Integer; +function compress2(dest: PChar; var destLen: LongInt; + const source: PChar; sourceLen: LongInt; + level: Integer): Integer; +function compressBound(sourceLen: LongInt): LongInt; +function uncompress(dest: PChar; var destLen: LongInt; + const source: PChar; sourceLen: LongInt): Integer; + +(* checksum functions *) +function adler32(adler: LongInt; const buf: PChar; len: Integer): LongInt; +function crc32(crc: LongInt; const buf: PChar; len: Integer): LongInt; + +(* various hacks, don't look :) *) +function deflateInit_(var strm: z_stream; level: Integer; + const version: PChar; stream_size: Integer): Integer; +function inflateInit_(var strm: z_stream; const version: PChar; + stream_size: Integer): Integer; +function deflateInit2_(var strm: z_stream; + level, method, windowBits, memLevel, strategy: Integer; + const version: PChar; stream_size: Integer): Integer; +function inflateInit2_(var strm: z_stream; windowBits: Integer; + const version: PChar; stream_size: Integer): Integer; +function inflateBackInit_(var strm: z_stream; + windowBits: Integer; window: PChar; + const version: PChar; stream_size: Integer): Integer; + + +implementation + +{$L adler32.obj} +{$L compress.obj} +{$L crc32.obj} +{$L deflate.obj} +{$L infback.obj} +{$L inffast.obj} +{$L inflate.obj} +{$L inftrees.obj} +{$L trees.obj} +{$L uncompr.obj} +{$L zutil.obj} + +function adler32; external; +function compress; external; +function compress2; external; +function compressBound; external; +function crc32; external; +function deflate; external; +function deflateBound; external; +function deflateCopy; external; +function deflateEnd; external; +function deflateInit_; external; +function deflateInit2_; external; +function deflateParams; external; +function deflatePrime; external; +function deflateReset; external; +function deflateSetDictionary; external; +function inflate; external; +function inflateBack; external; +function inflateBackEnd; external; +function inflateBackInit_; external; +function inflateCopy; external; +function inflateEnd; external; +function inflateInit_; external; +function inflateInit2_; external; +function inflateReset; external; +function inflateSetDictionary; external; +function inflateSync; external; +function uncompress; external; +function zlibCompileFlags; external; +function zlibVersion; external; + +function deflateInit(var strm: z_stream; level: Integer): Integer; +begin + Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream)); +end; + +function deflateInit2(var strm: z_stream; level, method, windowBits, memLevel, + strategy: Integer): Integer; +begin + Result := deflateInit2_(strm, level, method, windowBits, memLevel, strategy, + ZLIB_VERSION, sizeof(z_stream)); +end; + +function inflateInit(var strm: z_stream): Integer; +begin + Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream)); +end; + +function inflateInit2(var strm: z_stream; windowBits: Integer): Integer; +begin + Result := inflateInit2_(strm, windowBits, ZLIB_VERSION, sizeof(z_stream)); +end; + +function inflateBackInit(var strm: z_stream; + windowBits: Integer; window: PChar): Integer; +begin + Result := inflateBackInit_(strm, windowBits, window, + ZLIB_VERSION, sizeof(z_stream)); +end; + +function _malloc(Size: Integer): Pointer; cdecl; +begin + GetMem(Result, Size); +end; + +procedure _free(Block: Pointer); cdecl; +begin + FreeMem(Block); +end; + +procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl; +begin + FillChar(P^, count, B); +end; + +procedure _memcpy(dest, source: Pointer; count: Integer); cdecl; +begin + Move(source^, dest^, count); +end; + +end. diff --git a/common/dist/zlib/contrib/puff/Makefile b/common/dist/zlib/contrib/puff/Makefile new file mode 100644 index 000000000..b6b69404c --- /dev/null +++ b/common/dist/zlib/contrib/puff/Makefile @@ -0,0 +1,8 @@ +puff: puff.c puff.h + cc -DTEST -o puff puff.c + +test: puff + puff zeros.raw + +clean: + rm -f puff puff.o diff --git a/common/dist/zlib/contrib/puff/README b/common/dist/zlib/contrib/puff/README new file mode 100644 index 000000000..bbc4cb595 --- /dev/null +++ b/common/dist/zlib/contrib/puff/README @@ -0,0 +1,63 @@ +Puff -- A Simple Inflate +3 Mar 2003 +Mark Adler +madler@alumni.caltech.edu + +What this is -- + +puff.c provides the routine puff() to decompress the deflate data format. It +does so more slowly than zlib, but the code is about one-fifth the size of the +inflate code in zlib, and written to be very easy to read. + +Why I wrote this -- + +puff.c was written to document the deflate format unambiguously, by virtue of +being working C code. It is meant to supplement RFC 1951, which formally +describes the deflate format. I have received many questions on details of the +deflate format, and I hope that reading this code will answer those questions. +puff.c is heavily commented with details of the deflate format, especially +those little nooks and cranies of the format that might not be obvious from a +specification. + +puff.c may also be useful in applications where code size or memory usage is a +very limited resource, and speed is not as important. + +How to use it -- + +Well, most likely you should just be reading puff.c and using zlib for actual +applications, but if you must ... + +Include puff.h in your code, which provides this prototype: + +int puff(unsigned char *dest, /* pointer to destination pointer */ + unsigned long *destlen, /* amount of output space */ + unsigned char *source, /* pointer to source data pointer */ + unsigned long *sourcelen); /* amount of input available */ + +Then you can call puff() to decompress a deflate stream that is in memory in +its entirety at source, to a sufficiently sized block of memory for the +decompressed data at dest. puff() is the only external symbol in puff.c The +only C library functions that puff.c needs are setjmp() and longjmp(), which +are used to simplify error checking in the code to improve readabilty. puff.c +does no memory allocation, and uses less than 2K bytes off of the stack. + +If destlen is not enough space for the uncompressed data, then inflate will +return an error without writing more than destlen bytes. Note that this means +that in order to decompress the deflate data successfully, you need to know +the size of the uncompressed data ahead of time. + +If needed, puff() can determine the size of the uncompressed data with no +output space. This is done by passing dest equal to (unsigned char *)0. Then +the initial value of *destlen is ignored and *destlen is set to the length of +the uncompressed data. So if the size of the uncompressed data is not known, +then two passes of puff() can be used--first to determine the size, and second +to do the actual inflation after allocating the appropriate memory. Not +pretty, but it works. (This is one of the reasons you should be using zlib.) + +The deflate format is self-terminating. If the deflate stream does not end +in *sourcelen bytes, puff() will return an error without reading at or past +endsource. + +On return, *sourcelen is updated to the amount of input data consumed, and +*destlen is updated to the size of the uncompressed data. See the comments +in puff.c for the possible return codes for puff(). diff --git a/common/dist/zlib/contrib/puff/puff.c b/common/dist/zlib/contrib/puff/puff.c new file mode 100644 index 000000000..c3e13a03b --- /dev/null +++ b/common/dist/zlib/contrib/puff/puff.c @@ -0,0 +1,839 @@ +/* $NetBSD: puff.c,v 1.1.1.1 2006/01/14 20:11:02 christos Exp $ */ + +/* + * puff.c + * Copyright (C) 2002-2004 Mark Adler + * For conditions of distribution and use, see copyright notice in puff.h + * version 1.8, 9 Jan 2004 + * + * puff.c is a simple inflate written to be an unambiguous way to specify the + * deflate format. It is not written for speed but rather simplicity. As a + * side benefit, this code might actually be useful when small code is more + * important than speed, such as bootstrap applications. For typical deflate + * data, zlib's inflate() is about four times as fast as puff(). zlib's + * inflate compiles to around 20K on my machine, whereas puff.c compiles to + * around 4K on my machine (a PowerPC using GNU cc). If the faster decode() + * function here is used, then puff() is only twice as slow as zlib's + * inflate(). + * + * All dynamically allocated memory comes from the stack. The stack required + * is less than 2K bytes. This code is compatible with 16-bit int's and + * assumes that long's are at least 32 bits. puff.c uses the short data type, + * assumed to be 16 bits, for arrays in order to to conserve memory. The code + * works whether integers are stored big endian or little endian. + * + * In the comments below are "Format notes" that describe the inflate process + * and document some of the less obvious aspects of the format. This source + * code is meant to supplement RFC 1951, which formally describes the deflate + * format: + * + * http://www.zlib.org/rfc-deflate.html + */ + +/* + * Change history: + * + * 1.0 10 Feb 2002 - First version + * 1.1 17 Feb 2002 - Clarifications of some comments and notes + * - Update puff() dest and source pointers on negative + * errors to facilitate debugging deflators + * - Remove longest from struct huffman -- not needed + * - Simplify offs[] index in construct() + * - Add input size and checking, using longjmp() to + * maintain easy readability + * - Use short data type for large arrays + * - Use pointers instead of long to specify source and + * destination sizes to avoid arbitrary 4 GB limits + * 1.2 17 Mar 2002 - Add faster version of decode(), doubles speed (!), + * but leave simple version for readabilty + * - Make sure invalid distances detected if pointers + * are 16 bits + * - Fix fixed codes table error + * - Provide a scanning mode for determining size of + * uncompressed data + * 1.3 20 Mar 2002 - Go back to lengths for puff() parameters [Jean-loup] + * - Add a puff.h file for the interface + * - Add braces in puff() for else do [Jean-loup] + * - Use indexes instead of pointers for readability + * 1.4 31 Mar 2002 - Simplify construct() code set check + * - Fix some comments + * - Add FIXLCODES #define + * 1.5 6 Apr 2002 - Minor comment fixes + * 1.6 7 Aug 2002 - Minor format changes + * 1.7 3 Mar 2003 - Added test code for distribution + * - Added zlib-like license + * 1.8 9 Jan 2004 - Added some comments on no distance codes case + */ + +#include /* for setjmp(), longjmp(), and jmp_buf */ +#include "puff.h" /* prototype for puff() */ + +#define local static /* for local function definitions */ +#define NIL ((unsigned char *)0) /* for no output option */ + +/* + * Maximums for allocations and loops. It is not useful to change these -- + * they are fixed by the deflate format. + */ +#define MAXBITS 15 /* maximum bits in a code */ +#define MAXLCODES 286 /* maximum number of literal/length codes */ +#define MAXDCODES 30 /* maximum number of distance codes */ +#define MAXCODES (MAXLCODES+MAXDCODES) /* maximum codes lengths to read */ +#define FIXLCODES 288 /* number of fixed literal/length codes */ + +/* input and output state */ +struct state { + /* output state */ + unsigned char *out; /* output buffer */ + unsigned long outlen; /* available space at out */ + unsigned long outcnt; /* bytes written to out so far */ + + /* input state */ + unsigned char *in; /* input buffer */ + unsigned long inlen; /* available input at in */ + unsigned long incnt; /* bytes read so far */ + int bitbuf; /* bit buffer */ + int bitcnt; /* number of bits in bit buffer */ + + /* input limit error return state for bits() and decode() */ + jmp_buf env; +}; + +/* + * Return need bits from the input stream. This always leaves less than + * eight bits in the buffer. bits() works properly for need == 0. + * + * Format notes: + * + * - Bits are stored in bytes from the least significant bit to the most + * significant bit. Therefore bits are dropped from the bottom of the bit + * buffer, using shift right, and new bytes are appended to the top of the + * bit buffer, using shift left. + */ +local int bits(struct state *s, int need) +{ + long val; /* bit accumulator (can use up to 20 bits) */ + + /* load at least need bits into val */ + val = s->bitbuf; + while (s->bitcnt < need) { + if (s->incnt == s->inlen) longjmp(s->env, 1); /* out of input */ + val |= (long)(s->in[s->incnt++]) << s->bitcnt; /* load eight bits */ + s->bitcnt += 8; + } + + /* drop need bits and update buffer, always zero to seven bits left */ + s->bitbuf = (int)(val >> need); + s->bitcnt -= need; + + /* return need bits, zeroing the bits above that */ + return (int)(val & ((1L << need) - 1)); +} + +/* + * Process a stored block. + * + * Format notes: + * + * - After the two-bit stored block type (00), the stored block length and + * stored bytes are byte-aligned for fast copying. Therefore any leftover + * bits in the byte that has the last bit of the type, as many as seven, are + * discarded. The value of the discarded bits are not defined and should not + * be checked against any expectation. + * + * - The second inverted copy of the stored block length does not have to be + * checked, but it's probably a good idea to do so anyway. + * + * - A stored block can have zero length. This is sometimes used to byte-align + * subsets of the compressed data for random access or partial recovery. + */ +local int stored(struct state *s) +{ + unsigned len; /* length of stored block */ + + /* discard leftover bits from current byte (assumes s->bitcnt < 8) */ + s->bitbuf = 0; + s->bitcnt = 0; + + /* get length and check against its one's complement */ + if (s->incnt + 4 > s->inlen) return 2; /* not enough input */ + len = s->in[s->incnt++]; + len |= s->in[s->incnt++] << 8; + if (s->in[s->incnt++] != (~len & 0xff) || + s->in[s->incnt++] != ((~len >> 8) & 0xff)) + return -2; /* didn't match complement! */ + + /* copy len bytes from in to out */ + if (s->incnt + len > s->inlen) return 2; /* not enough input */ + if (s->out != NIL) { + if (s->outcnt + len > s->outlen) + return 1; /* not enough output space */ + while (len--) + s->out[s->outcnt++] = s->in[s->incnt++]; + } + else { /* just scanning */ + s->outcnt += len; + s->incnt += len; + } + + /* done with a valid stored block */ + return 0; +} + +/* + * Huffman code decoding tables. count[1..MAXBITS] is the number of symbols of + * each length, which for a canonical code are stepped through in order. + * symbol[] are the symbol values in canonical order, where the number of + * entries is the sum of the counts in count[]. The decoding process can be + * seen in the function decode() below. + */ +struct huffman { + short *count; /* number of symbols of each length */ + short *symbol; /* canonically ordered symbols */ +}; + +/* + * Decode a code from the stream s using huffman table h. Return the symbol or + * a negative value if there is an error. If all of the lengths are zero, i.e. + * an empty code, or if the code is incomplete and an invalid code is received, + * then -9 is returned after reading MAXBITS bits. + * + * Format notes: + * + * - The codes as stored in the compressed data are bit-reversed relative to + * a simple integer ordering of codes of the same lengths. Hence below the + * bits are pulled from the compressed data one at a time and used to + * build the code value reversed from what is in the stream in order to + * permit simple integer comparisons for decoding. A table-based decoding + * scheme (as used in zlib) does not need to do this reversal. + * + * - The first code for the shortest length is all zeros. Subsequent codes of + * the same length are simply integer increments of the previous code. When + * moving up a length, a zero bit is appended to the code. For a complete + * code, the last code of the longest length will be all ones. + * + * - Incomplete codes are handled by this decoder, since they are permitted + * in the deflate format. See the format notes for fixed() and dynamic(). + */ +#ifdef SLOW +local int decode(struct state *s, struct huffman *h) +{ + int len; /* current number of bits in code */ + int code; /* len bits being decoded */ + int first; /* first code of length len */ + int count; /* number of codes of length len */ + int index; /* index of first code of length len in symbol table */ + + code = first = index = 0; + for (len = 1; len <= MAXBITS; len++) { + code |= bits(s, 1); /* get next bit */ + count = h->count[len]; + if (code < first + count) /* if length len, return symbol */ + return h->symbol[index + (code - first)]; + index += count; /* else update for next length */ + first += count; + first <<= 1; + code <<= 1; + } + return -9; /* ran out of codes */ +} + +/* + * A faster version of decode() for real applications of this code. It's not + * as readable, but it makes puff() twice as fast. And it only makes the code + * a few percent larger. + */ +#else /* !SLOW */ +local int decode(struct state *s, struct huffman *h) +{ + int len; /* current number of bits in code */ + int code; /* len bits being decoded */ + int first; /* first code of length len */ + int count; /* number of codes of length len */ + int index; /* index of first code of length len in symbol table */ + int bitbuf; /* bits from stream */ + int left; /* bits left in next or left to process */ + short *next; /* next number of codes */ + + bitbuf = s->bitbuf; + left = s->bitcnt; + code = first = index = 0; + len = 1; + next = h->count + 1; + while (1) { + while (left--) { + code |= bitbuf & 1; + bitbuf >>= 1; + count = *next++; + if (code < first + count) { /* if length len, return symbol */ + s->bitbuf = bitbuf; + s->bitcnt = (s->bitcnt - len) & 7; + return h->symbol[index + (code - first)]; + } + index += count; /* else update for next length */ + first += count; + first <<= 1; + code <<= 1; + len++; + } + left = (MAXBITS+1) - len; + if (left == 0) break; + if (s->incnt == s->inlen) longjmp(s->env, 1); /* out of input */ + bitbuf = s->in[s->incnt++]; + if (left > 8) left = 8; + } + return -9; /* ran out of codes */ +} +#endif /* SLOW */ + +/* + * Given the list of code lengths length[0..n-1] representing a canonical + * Huffman code for n symbols, construct the tables required to decode those + * codes. Those tables are the number of codes of each length, and the symbols + * sorted by length, retaining their original order within each length. The + * return value is zero for a complete code set, negative for an over- + * subscribed code set, and positive for an incomplete code set. The tables + * can be used if the return value is zero or positive, but they cannot be used + * if the return value is negative. If the return value is zero, it is not + * possible for decode() using that table to return an error--any stream of + * enough bits will resolve to a symbol. If the return value is positive, then + * it is possible for decode() using that table to return an error for received + * codes past the end of the incomplete lengths. + * + * Not used by decode(), but used for error checking, h->count[0] is the number + * of the n symbols not in the code. So n - h->count[0] is the number of + * codes. This is useful for checking for incomplete codes that have more than + * one symbol, which is an error in a dynamic block. + * + * Assumption: for all i in 0..n-1, 0 <= length[i] <= MAXBITS + * This is assured by the construction of the length arrays in dynamic() and + * fixed() and is not verified by construct(). + * + * Format notes: + * + * - Permitted and expected examples of incomplete codes are one of the fixed + * codes and any code with a single symbol which in deflate is coded as one + * bit instead of zero bits. See the format notes for fixed() and dynamic(). + * + * - Within a given code length, the symbols are kept in ascending order for + * the code bits definition. + */ +local int construct(struct huffman *h, short *length, int n) +{ + int symbol; /* current symbol when stepping through length[] */ + int len; /* current length when stepping through h->count[] */ + int left; /* number of possible codes left of current length */ + short offs[MAXBITS+1]; /* offsets in symbol table for each length */ + + /* count number of codes of each length */ + for (len = 0; len <= MAXBITS; len++) + h->count[len] = 0; + for (symbol = 0; symbol < n; symbol++) + (h->count[length[symbol]])++; /* assumes lengths are within bounds */ + if (h->count[0] == n) /* no codes! */ + return 0; /* complete, but decode() will fail */ + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; /* one possible code of zero length */ + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; /* one more bit, double codes left */ + left -= h->count[len]; /* deduct count from possible codes */ + if (left < 0) return left; /* over-subscribed--return negative */ + } /* left > 0 means incomplete */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + h->count[len]; + + /* + * put symbols in table sorted by length, by symbol order within each + * length + */ + for (symbol = 0; symbol < n; symbol++) + if (length[symbol] != 0) + h->symbol[offs[length[symbol]]++] = symbol; + + /* return zero for complete set, positive for incomplete set */ + return left; +} + +/* + * Decode literal/length and distance codes until an end-of-block code. + * + * Format notes: + * + * - Compressed data that is after the block type if fixed or after the code + * description if dynamic is a combination of literals and length/distance + * pairs terminated by and end-of-block code. Literals are simply Huffman + * coded bytes. A length/distance pair is a coded length followed by a + * coded distance to represent a string that occurs earlier in the + * uncompressed data that occurs again at the current location. + * + * - Literals, lengths, and the end-of-block code are combined into a single + * code of up to 286 symbols. They are 256 literals (0..255), 29 length + * symbols (257..285), and the end-of-block symbol (256). + * + * - There are 256 possible lengths (3..258), and so 29 symbols are not enough + * to represent all of those. Lengths 3..10 and 258 are in fact represented + * by just a length symbol. Lengths 11..257 are represented as a symbol and + * some number of extra bits that are added as an integer to the base length + * of the length symbol. The number of extra bits is determined by the base + * length symbol. These are in the static arrays below, lens[] for the base + * lengths and lext[] for the corresponding number of extra bits. + * + * - The reason that 258 gets its own symbol is that the longest length is used + * often in highly redundant files. Note that 258 can also be coded as the + * base value 227 plus the maximum extra value of 31. While a good deflate + * should never do this, it is not an error, and should be decoded properly. + * + * - If a length is decoded, including its extra bits if any, then it is + * followed a distance code. There are up to 30 distance symbols. Again + * there are many more possible distances (1..32768), so extra bits are added + * to a base value represented by the symbol. The distances 1..4 get their + * own symbol, but the rest require extra bits. The base distances and + * corresponding number of extra bits are below in the static arrays dist[] + * and dext[]. + * + * - Literal bytes are simply written to the output. A length/distance pair is + * an instruction to copy previously uncompressed bytes to the output. The + * copy is from distance bytes back in the output stream, copying for length + * bytes. + * + * - Distances pointing before the beginning of the output data are not + * permitted. + * + * - Overlapped copies, where the length is greater than the distance, are + * allowed and common. For example, a distance of one and a length of 258 + * simply copies the last byte 258 times. A distance of four and a length of + * twelve copies the last four bytes three times. A simple forward copy + * ignoring whether the length is greater than the distance or not implements + * this correctly. You should not use memcpy() since its behavior is not + * defined for overlapped arrays. You should not use memmove() or bcopy() + * since though their behavior -is- defined for overlapping arrays, it is + * defined to do the wrong thing in this case. + */ +local int codes(struct state *s, + struct huffman *lencode, + struct huffman *distcode) +{ + int symbol; /* decoded symbol */ + int len; /* length for copy */ + unsigned dist; /* distance for copy */ + static const short lens[29] = { /* Size base for length codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258}; + static const short lext[29] = { /* Extra bits for length codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0}; + static const short dists[30] = { /* Offset base for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; + static const short dext[30] = { /* Extra bits for distance codes 0..29 */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + + /* decode literals and length/distance pairs */ + do { + symbol = decode(s, lencode); + if (symbol < 0) return symbol; /* invalid symbol */ + if (symbol < 256) { /* literal: symbol is the byte */ + /* write out the literal */ + if (s->out != NIL) { + if (s->outcnt == s->outlen) return 1; + s->out[s->outcnt] = symbol; + } + s->outcnt++; + } + else if (symbol > 256) { /* length */ + /* get and compute length */ + symbol -= 257; + if (symbol >= 29) return -9; /* invalid fixed code */ + len = lens[symbol] + bits(s, lext[symbol]); + + /* get and check distance */ + symbol = decode(s, distcode); + if (symbol < 0) return symbol; /* invalid symbol */ + dist = dists[symbol] + bits(s, dext[symbol]); + if (dist > s->outcnt) + return -10; /* distance too far back */ + + /* copy length bytes from distance bytes back */ + if (s->out != NIL) { + if (s->outcnt + len > s->outlen) return 1; + while (len--) { + s->out[s->outcnt] = s->out[s->outcnt - dist]; + s->outcnt++; + } + } + else + s->outcnt += len; + } + } while (symbol != 256); /* end of block symbol */ + + /* done with a valid fixed or dynamic block */ + return 0; +} + +/* + * Process a fixed codes block. + * + * Format notes: + * + * - This block type can be useful for compressing small amounts of data for + * which the size of the code descriptions in a dynamic block exceeds the + * benefit of custom codes for that block. For fixed codes, no bits are + * spent on code descriptions. Instead the code lengths for literal/length + * codes and distance codes are fixed. The specific lengths for each symbol + * can be seen in the "for" loops below. + * + * - The literal/length code is complete, but has two symbols that are invalid + * and should result in an error if received. This cannot be implemented + * simply as an incomplete code since those two symbols are in the "middle" + * of the code. They are eight bits long and the longest literal/length\ + * code is nine bits. Therefore the code must be constructed with those + * symbols, and the invalid symbols must be detected after decoding. + * + * - The fixed distance codes also have two invalid symbols that should result + * in an error if received. Since all of the distance codes are the same + * length, this can be implemented as an incomplete code. Then the invalid + * codes are detected while decoding. + */ +local int fixed(struct state *s) +{ + static int virgin = 1; + static short lencnt[MAXBITS+1], lensym[FIXLCODES]; + static short distcnt[MAXBITS+1], distsym[MAXDCODES]; + static struct huffman lencode = {lencnt, lensym}; + static struct huffman distcode = {distcnt, distsym}; + + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + int symbol; + short lengths[FIXLCODES]; + + /* literal/length table */ + for (symbol = 0; symbol < 144; symbol++) + lengths[symbol] = 8; + for (; symbol < 256; symbol++) + lengths[symbol] = 9; + for (; symbol < 280; symbol++) + lengths[symbol] = 7; + for (; symbol < FIXLCODES; symbol++) + lengths[symbol] = 8; + construct(&lencode, lengths, FIXLCODES); + + /* distance table */ + for (symbol = 0; symbol < MAXDCODES; symbol++) + lengths[symbol] = 5; + construct(&distcode, lengths, MAXDCODES); + + /* do this just once */ + virgin = 0; + } + + /* decode data until end-of-block code */ + return codes(s, &lencode, &distcode); +} + +/* + * Process a dynamic codes block. + * + * Format notes: + * + * - A dynamic block starts with a description of the literal/length and + * distance codes for that block. New dynamic blocks allow the compressor to + * rapidly adapt to changing data with new codes optimized for that data. + * + * - The codes used by the deflate format are "canonical", which means that + * the actual bits of the codes are generated in an unambiguous way simply + * from the number of bits in each code. Therefore the code descriptions + * are simply a list of code lengths for each symbol. + * + * - The code lengths are stored in order for the symbols, so lengths are + * provided for each of the literal/length symbols, and for each of the + * distance symbols. + * + * - If a symbol is not used in the block, this is represented by a zero as + * as the code length. This does not mean a zero-length code, but rather + * that no code should be created for this symbol. There is no way in the + * deflate format to represent a zero-length code. + * + * - The maximum number of bits in a code is 15, so the possible lengths for + * any code are 1..15. + * + * - The fact that a length of zero is not permitted for a code has an + * interesting consequence. Normally if only one symbol is used for a given + * code, then in fact that code could be represented with zero bits. However + * in deflate, that code has to be at least one bit. So for example, if + * only a single distance base symbol appears in a block, then it will be + * represented by a single code of length one, in particular one 0 bit. This + * is an incomplete code, since if a 1 bit is received, it has no meaning, + * and should result in an error. So incomplete distance codes of one symbol + * should be permitted, and the receipt of invalid codes should be handled. + * + * - It is also possible to have a single literal/length code, but that code + * must be the end-of-block code, since every dynamic block has one. This + * is not the most efficient way to create an empty block (an empty fixed + * block is fewer bits), but it is allowed by the format. So incomplete + * literal/length codes of one symbol should also be permitted. + * + * - If there are only literal codes and no lengths, then there are no distance + * codes. This is represented by one distance code with zero bits. + * + * - The list of up to 286 length/literal lengths and up to 30 distance lengths + * are themselves compressed using Huffman codes and run-length encoding. In + * the list of code lengths, a 0 symbol means no code, a 1..15 symbol means + * that length, and the symbols 16, 17, and 18 are run-length instructions. + * Each of 16, 17, and 18 are follwed by extra bits to define the length of + * the run. 16 copies the last length 3 to 6 times. 17 represents 3 to 10 + * zero lengths, and 18 represents 11 to 138 zero lengths. Unused symbols + * are common, hence the special coding for zero lengths. + * + * - The symbols for 0..18 are Huffman coded, and so that code must be + * described first. This is simply a sequence of up to 19 three-bit values + * representing no code (0) or the code length for that symbol (1..7). + * + * - A dynamic block starts with three fixed-size counts from which is computed + * the number of literal/length code lengths, the number of distance code + * lengths, and the number of code length code lengths (ok, you come up with + * a better name!) in the code descriptions. For the literal/length and + * distance codes, lengths after those provided are considered zero, i.e. no + * code. The code length code lengths are received in a permuted order (see + * the order[] array below) to make a short code length code length list more + * likely. As it turns out, very short and very long codes are less likely + * to be seen in a dynamic code description, hence what may appear initially + * to be a peculiar ordering. + * + * - Given the number of literal/length code lengths (nlen) and distance code + * lengths (ndist), then they are treated as one long list of nlen + ndist + * code lengths. Therefore run-length coding can and often does cross the + * boundary between the two sets of lengths. + * + * - So to summarize, the code description at the start of a dynamic block is + * three counts for the number of code lengths for the literal/length codes, + * the distance codes, and the code length codes. This is followed by the + * code length code lengths, three bits each. This is used to construct the + * code length code which is used to read the remainder of the lengths. Then + * the literal/length code lengths and distance lengths are read as a single + * set of lengths using the code length codes. Codes are constructed from + * the resulting two sets of lengths, and then finally you can start + * decoding actual compressed data in the block. + * + * - For reference, a "typical" size for the code description in a dynamic + * block is around 80 bytes. + */ +local int dynamic(struct state *s) +{ + int nlen, ndist, ncode; /* number of lengths in descriptor */ + int index; /* index of lengths[] */ + int err; /* construct() return value */ + short lengths[MAXCODES]; /* descriptor code lengths */ + short lencnt[MAXBITS+1], lensym[MAXLCODES]; /* lencode memory */ + short distcnt[MAXBITS+1], distsym[MAXDCODES]; /* distcode memory */ + struct huffman lencode = {lencnt, lensym}; /* length code */ + struct huffman distcode = {distcnt, distsym}; /* distance code */ + static const short order[19] = /* permutation of code length codes */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + /* get number of lengths in each table, check lengths */ + nlen = bits(s, 5) + 257; + ndist = bits(s, 5) + 1; + ncode = bits(s, 4) + 4; + if (nlen > MAXLCODES || ndist > MAXDCODES) + return -3; /* bad counts */ + + /* read code length code lengths (really), missing lengths are zero */ + for (index = 0; index < ncode; index++) + lengths[order[index]] = bits(s, 3); + for (; index < 19; index++) + lengths[order[index]] = 0; + + /* build huffman table for code lengths codes (use lencode temporarily) */ + err = construct(&lencode, lengths, 19); + if (err != 0) return -4; /* require complete code set here */ + + /* read length/literal and distance code length tables */ + index = 0; + while (index < nlen + ndist) { + int symbol; /* decoded value */ + int len; /* last length to repeat */ + + symbol = decode(s, &lencode); + if (symbol < 16) /* length in 0..15 */ + lengths[index++] = symbol; + else { /* repeat instruction */ + len = 0; /* assume repeating zeros */ + if (symbol == 16) { /* repeat last length 3..6 times */ + if (index == 0) return -5; /* no last length! */ + len = lengths[index - 1]; /* last length */ + symbol = 3 + bits(s, 2); + } + else if (symbol == 17) /* repeat zero 3..10 times */ + symbol = 3 + bits(s, 3); + else /* == 18, repeat zero 11..138 times */ + symbol = 11 + bits(s, 7); + if (index + symbol > nlen + ndist) + return -6; /* too many lengths! */ + while (symbol--) /* repeat last or zero symbol times */ + lengths[index++] = len; + } + } + + /* build huffman table for literal/length codes */ + err = construct(&lencode, lengths, nlen); + if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1)) + return -7; /* only allow incomplete codes if just one code */ + + /* build huffman table for distance codes */ + err = construct(&distcode, lengths + nlen, ndist); + if (err < 0 || (err > 0 && ndist - distcode.count[0] != 1)) + return -8; /* only allow incomplete codes if just one code */ + + /* decode data until end-of-block code */ + return codes(s, &lencode, &distcode); +} + +/* + * Inflate source to dest. On return, destlen and sourcelen are updated to the + * size of the uncompressed data and the size of the deflate data respectively. + * On success, the return value of puff() is zero. If there is an error in the + * source data, i.e. it is not in the deflate format, then a negative value is + * returned. If there is not enough input available or there is not enough + * output space, then a positive error is returned. In that case, destlen and + * sourcelen are not updated to facilitate retrying from the beginning with the + * provision of more input data or more output space. In the case of invalid + * inflate data (a negative error), the dest and source pointers are updated to + * facilitate the debugging of deflators. + * + * puff() also has a mode to determine the size of the uncompressed output with + * no output written. For this dest must be (unsigned char *)0. In this case, + * the input value of *destlen is ignored, and on return *destlen is set to the + * size of the uncompressed output. + * + * The return codes are: + * + * 2: available inflate data did not terminate + * 1: output space exhausted before completing inflate + * 0: successful inflate + * -1: invalid block type (type == 3) + * -2: stored block length did not match one's complement + * -3: dynamic block code description: too many length or distance codes + * -4: dynamic block code description: code lengths codes incomplete + * -5: dynamic block code description: repeat lengths with no first length + * -6: dynamic block code description: repeat more than specified lengths + * -7: dynamic block code description: invalid literal/length code lengths + * -8: dynamic block code description: invalid distance code lengths + * -9: invalid literal/length or distance code in fixed or dynamic block + * -10: distance is too far back in fixed or dynamic block + * + * Format notes: + * + * - Three bits are read for each block to determine the kind of block and + * whether or not it is the last block. Then the block is decoded and the + * process repeated if it was not the last block. + * + * - The leftover bits in the last byte of the deflate data after the last + * block (if it was a fixed or dynamic block) are undefined and have no + * expected values to check. + */ +int puff(unsigned char *dest, /* pointer to destination pointer */ + unsigned long *destlen, /* amount of output space */ + unsigned char *source, /* pointer to source data pointer */ + unsigned long *sourcelen) /* amount of input available */ +{ + struct state s; /* input/output state */ + int last, type; /* block information */ + int err; /* return value */ + + /* initialize output state */ + s.out = dest; + s.outlen = *destlen; /* ignored if dest is NIL */ + s.outcnt = 0; + + /* initialize input state */ + s.in = source; + s.inlen = *sourcelen; + s.incnt = 0; + s.bitbuf = 0; + s.bitcnt = 0; + + /* return if bits() or decode() tries to read past available input */ + if (setjmp(s.env) != 0) /* if came back here via longjmp() */ + err = 2; /* then skip do-loop, return error */ + else { + /* process blocks until last block or error */ + do { + last = bits(&s, 1); /* one if last block */ + type = bits(&s, 2); /* block type 0..3 */ + err = type == 0 ? stored(&s) : + (type == 1 ? fixed(&s) : + (type == 2 ? dynamic(&s) : + -1)); /* type == 3, invalid */ + if (err != 0) break; /* return with error */ + } while (!last); + } + + /* update the lengths and return */ + if (err <= 0) { + *destlen = s.outcnt; + *sourcelen = s.incnt; + } + return err; +} + +#ifdef TEST +/* Example of how to use puff() */ +#include +#include +#include +#include + +local unsigned char *yank(char *name, unsigned long *len) +{ + unsigned long size; + unsigned char *buf; + FILE *in; + struct stat s; + + *len = 0; + if (stat(name, &s)) return NULL; + if ((s.st_mode & S_IFMT) != S_IFREG) return NULL; + size = (unsigned long)(s.st_size); + if (size == 0 || (off_t)size != s.st_size) return NULL; + in = fopen(name, "r"); + if (in == NULL) return NULL; + buf = malloc(size); + if (buf != NULL && fread(buf, 1, size, in) != size) { + free(buf); + buf = NULL; + } + fclose(in); + *len = size; + return buf; +} + +int main(int argc, char **argv) +{ + int ret; + unsigned char *source; + unsigned long len, sourcelen, destlen; + + if (argc < 2) return 2; + source = yank(argv[1], &len); + if (source == NULL) return 2; + sourcelen = len; + ret = puff(NIL, &destlen, source, &sourcelen); + if (ret) + printf("puff() failed with return code %d\n", ret); + else { + printf("puff() succeeded uncompressing %lu bytes\n", destlen); + if (sourcelen < len) printf("%lu compressed bytes unused\n", + len - sourcelen); + } + free(source); + return ret; +} +#endif diff --git a/common/dist/zlib/contrib/puff/puff.h b/common/dist/zlib/contrib/puff/puff.h new file mode 100644 index 000000000..f19f4ce7f --- /dev/null +++ b/common/dist/zlib/contrib/puff/puff.h @@ -0,0 +1,33 @@ +/* $NetBSD: puff.h,v 1.1.1.1 2006/01/14 20:11:02 christos Exp $ */ + +/* puff.h + Copyright (C) 2002, 2003 Mark Adler, all rights reserved + version 1.7, 3 Mar 2002 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + + +/* + * See puff.c for purpose and usage. + */ +int puff(unsigned char *dest, /* pointer to destination pointer */ + unsigned long *destlen, /* amount of output space */ + unsigned char *source, /* pointer to source data pointer */ + unsigned long *sourcelen); /* amount of input available */ diff --git a/common/dist/zlib/contrib/puff/zeros.raw b/common/dist/zlib/contrib/puff/zeros.raw new file mode 100644 index 0000000000000000000000000000000000000000..637b7be6f5bfd577cec5537aaad160cc5fc0a7c7 GIT binary patch literal 1213 mcmaERu#o`>4lno_9RH9Zlo7-k1*0J_8UmvsFvvroKmq`7t_J-8 literal 0 HcmV?d00001 diff --git a/common/dist/zlib/contrib/testzlib/testzlib.c b/common/dist/zlib/contrib/testzlib/testzlib.c new file mode 100644 index 000000000..e131aa9d7 --- /dev/null +++ b/common/dist/zlib/contrib/testzlib/testzlib.c @@ -0,0 +1,277 @@ +/* $NetBSD: testzlib.c,v 1.1.1.1 2006/01/14 20:11:02 christos Exp $ */ + +#include +#include +#include + +#include "zlib.h" + + +void MyDoMinus64(LARGE_INTEGER *R,LARGE_INTEGER A,LARGE_INTEGER B) +{ + R->HighPart = A.HighPart - B.HighPart; + if (A.LowPart >= B.LowPart) + R->LowPart = A.LowPart - B.LowPart; + else + { + R->LowPart = A.LowPart - B.LowPart; + R->HighPart --; + } +} + +#ifdef _M_X64 +// see http://msdn2.microsoft.com/library/twchhe95(en-us,vs.80).aspx for __rdtsc +unsigned __int64 __rdtsc(void); +void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64) +{ + // printf("rdtsc = %I64x\n",__rdtsc()); + pbeginTime64->QuadPart=__rdtsc(); +} + +LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER LIres; + unsigned _int64 res=__rdtsc()-((unsigned _int64)(beginTime64.QuadPart)); + LIres.QuadPart=res; + // printf("rdtsc = %I64x\n",__rdtsc()); + return LIres; +} +#else +#ifdef _M_IX86 +void myGetRDTSC32(LARGE_INTEGER * pbeginTime64) +{ + DWORD dwEdx,dwEax; + _asm + { + rdtsc + mov dwEax,eax + mov dwEdx,edx + } + pbeginTime64->LowPart=dwEax; + pbeginTime64->HighPart=dwEdx; +} + +void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64) +{ + myGetRDTSC32(pbeginTime64); +} + +LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER LIres,endTime64; + myGetRDTSC32(&endTime64); + + LIres.LowPart=LIres.HighPart=0; + MyDoMinus64(&LIres,endTime64,beginTime64); + return LIres; +} +#else +void myGetRDTSC32(LARGE_INTEGER * pbeginTime64) +{ +} + +void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64) +{ +} + +LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER lr; + lr.QuadPart=0; + return lr; +} +#endif +#endif + +void BeginCountPerfCounter(LARGE_INTEGER * pbeginTime64,BOOL fComputeTimeQueryPerf) +{ + if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(pbeginTime64))) + { + pbeginTime64->LowPart = GetTickCount(); + pbeginTime64->HighPart = 0; + } +} + +DWORD GetMsecSincePerfCounter(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER endTime64,ticksPerSecond,ticks; + DWORDLONG ticksShifted,tickSecShifted; + DWORD dwLog=16+0; + DWORD dwRet; + if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(&endTime64))) + dwRet = (GetTickCount() - beginTime64.LowPart)*1; + else + { + MyDoMinus64(&ticks,endTime64,beginTime64); + QueryPerformanceFrequency(&ticksPerSecond); + + + { + ticksShifted = Int64ShrlMod32(*(DWORDLONG*)&ticks,dwLog); + tickSecShifted = Int64ShrlMod32(*(DWORDLONG*)&ticksPerSecond,dwLog); + + } + + dwRet = (DWORD)((((DWORD)ticksShifted)*1000)/(DWORD)(tickSecShifted)); + dwRet *=1; + } + return dwRet; +} + +int ReadFileMemory(const char* filename,long* plFileSize,void** pFilePtr) +{ + FILE* stream; + void* ptr; + int retVal=1; + stream=fopen(filename, "rb"); + if (stream==NULL) + return 0; + + fseek(stream,0,SEEK_END); + + *plFileSize=ftell(stream); + fseek(stream,0,SEEK_SET); + ptr=malloc((*plFileSize)+1); + if (ptr==NULL) + retVal=0; + else + { + if (fread(ptr, 1, *plFileSize,stream) != (*plFileSize)) + retVal=0; + } + fclose(stream); + *pFilePtr=ptr; + return retVal; +} + +int main(int argc, char *argv[]) +{ + int BlockSizeCompress=0x8000; + int BlockSizeUncompress=0x8000; + int cprLevel=Z_DEFAULT_COMPRESSION ; + long lFileSize; + unsigned char* FilePtr; + long lBufferSizeCpr; + long lBufferSizeUncpr; + long lCompressedSize=0; + unsigned char* CprPtr; + unsigned char* UncprPtr; + long lSizeCpr,lSizeUncpr; + DWORD dwGetTick,dwMsecQP; + LARGE_INTEGER li_qp,li_rdtsc,dwResRdtsc; + + if (argc<=1) + { + printf("run TestZlib [BlockSizeCompress] [BlockSizeUncompress] [compres. level]\n"); + return 0; + } + + if (ReadFileMemory(argv[1],&lFileSize,&FilePtr)==0) + { + printf("error reading %s\n",argv[1]); + return 1; + } + else printf("file %s read, %u bytes\n",argv[1],lFileSize); + + if (argc>=3) + BlockSizeCompress=atol(argv[2]); + + if (argc>=4) + BlockSizeUncompress=atol(argv[3]); + + if (argc>=5) + cprLevel=(int)atol(argv[4]); + + lBufferSizeCpr = lFileSize + (lFileSize/0x10) + 0x200; + lBufferSizeUncpr = lBufferSizeCpr; + + CprPtr=(unsigned char*)malloc(lBufferSizeCpr + BlockSizeCompress); + + BeginCountPerfCounter(&li_qp,TRUE); + dwGetTick=GetTickCount(); + BeginCountRdtsc(&li_rdtsc); + { + z_stream zcpr; + int ret=Z_OK; + long lOrigToDo = lFileSize; + long lOrigDone = 0; + int step=0; + memset(&zcpr,0,sizeof(z_stream)); + deflateInit(&zcpr,cprLevel); + + zcpr.next_in = FilePtr; + zcpr.next_out = CprPtr; + + + do + { + long all_read_before = zcpr.total_in; + zcpr.avail_in = min(lOrigToDo,BlockSizeCompress); + zcpr.avail_out = BlockSizeCompress; + ret=deflate(&zcpr,(zcpr.avail_in==lOrigToDo) ? Z_FINISH : Z_SYNC_FLUSH); + lOrigDone += (zcpr.total_in-all_read_before); + lOrigToDo -= (zcpr.total_in-all_read_before); + step++; + } while (ret==Z_OK); + + lSizeCpr=zcpr.total_out; + deflateEnd(&zcpr); + dwGetTick=GetTickCount()-dwGetTick; + dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE); + dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE); + printf("total compress size = %u, in %u step\n",lSizeCpr,step); + printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.); + printf("defcpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.); + printf("defcpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart); + } + + CprPtr=(unsigned char*)realloc(CprPtr,lSizeCpr); + UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress); + + BeginCountPerfCounter(&li_qp,TRUE); + dwGetTick=GetTickCount(); + BeginCountRdtsc(&li_rdtsc); + { + z_stream zcpr; + int ret=Z_OK; + long lOrigToDo = lSizeCpr; + long lOrigDone = 0; + int step=0; + memset(&zcpr,0,sizeof(z_stream)); + inflateInit(&zcpr); + + zcpr.next_in = CprPtr; + zcpr.next_out = UncprPtr; + + + do + { + long all_read_before = zcpr.total_in; + zcpr.avail_in = min(lOrigToDo,BlockSizeUncompress); + zcpr.avail_out = BlockSizeUncompress; + ret=inflate(&zcpr,Z_SYNC_FLUSH); + lOrigDone += (zcpr.total_in-all_read_before); + lOrigToDo -= (zcpr.total_in-all_read_before); + step++; + } while (ret==Z_OK); + + lSizeUncpr=zcpr.total_out; + inflateEnd(&zcpr); + dwGetTick=GetTickCount()-dwGetTick; + dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE); + dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE); + printf("total uncompress size = %u, in %u step\n",lSizeUncpr,step); + printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.); + printf("uncpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.); + printf("uncpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart); + } + + if (lSizeUncpr==lFileSize) + { + if (memcmp(FilePtr,UncprPtr,lFileSize)==0) + printf("compare ok\n"); + + } + + return 0; +} diff --git a/common/dist/zlib/contrib/testzlib/testzlib.txt b/common/dist/zlib/contrib/testzlib/testzlib.txt new file mode 100644 index 000000000..62258f149 --- /dev/null +++ b/common/dist/zlib/contrib/testzlib/testzlib.txt @@ -0,0 +1,10 @@ +To build testzLib with Visual Studio 2005: + +copy to a directory file from : +- root of zLib tree +- contrib/testzlib +- contrib/masmx86 +- contrib/masmx64 +- contrib/vstudio/vc7 + +and open testzlib8.sln \ No newline at end of file diff --git a/common/dist/zlib/contrib/untgz/Makefile b/common/dist/zlib/contrib/untgz/Makefile new file mode 100644 index 000000000..b54266fba --- /dev/null +++ b/common/dist/zlib/contrib/untgz/Makefile @@ -0,0 +1,14 @@ +CC=cc +CFLAGS=-g + +untgz: untgz.o ../../libz.a + $(CC) $(CFLAGS) -o untgz untgz.o -L../.. -lz + +untgz.o: untgz.c ../../zlib.h + $(CC) $(CFLAGS) -c -I../.. untgz.c + +../../libz.a: + cd ../..; ./configure; make + +clean: + rm -f untgz untgz.o *~ diff --git a/common/dist/zlib/contrib/untgz/Makefile.msc b/common/dist/zlib/contrib/untgz/Makefile.msc new file mode 100644 index 000000000..77b860221 --- /dev/null +++ b/common/dist/zlib/contrib/untgz/Makefile.msc @@ -0,0 +1,17 @@ +CC=cl +CFLAGS=-MD + +untgz.exe: untgz.obj ..\..\zlib.lib + $(CC) $(CFLAGS) untgz.obj ..\..\zlib.lib + +untgz.obj: untgz.c ..\..\zlib.h + $(CC) $(CFLAGS) -c -I..\.. untgz.c + +..\..\zlib.lib: + cd ..\.. + $(MAKE) -f win32\makefile.msc + cd contrib\untgz + +clean: + -del untgz.obj + -del untgz.exe diff --git a/common/dist/zlib/contrib/untgz/untgz.c b/common/dist/zlib/contrib/untgz/untgz.c new file mode 100644 index 000000000..b39ede37f --- /dev/null +++ b/common/dist/zlib/contrib/untgz/untgz.c @@ -0,0 +1,676 @@ +/* $NetBSD: untgz.c,v 1.1.1.1 2006/01/14 20:11:02 christos Exp $ */ + +/* + * untgz.c -- Display contents and extract files from a gzip'd TAR file + * + * written by Pedro A. Aranda Gutierrez + * adaptation to Unix by Jean-loup Gailly + * various fixes by Cosmin Truta + */ + +#include +#include +#include +#include +#include + +#include "zlib.h" + +#ifdef unix +# include +#else +# include +# include +#endif + +#ifdef WIN32 +#include +# ifndef F_OK +# define F_OK 0 +# endif +# define mkdir(dirname,mode) _mkdir(dirname) +# ifdef _MSC_VER +# define access(path,mode) _access(path,mode) +# define chmod(path,mode) _chmod(path,mode) +# define strdup(str) _strdup(str) +# endif +#else +# include +#endif + + +/* values used in typeflag field */ + +#define REGTYPE '0' /* regular file */ +#define AREGTYPE '\0' /* regular file */ +#define LNKTYPE '1' /* link */ +#define SYMTYPE '2' /* reserved */ +#define CHRTYPE '3' /* character special */ +#define BLKTYPE '4' /* block special */ +#define DIRTYPE '5' /* directory */ +#define FIFOTYPE '6' /* FIFO special */ +#define CONTTYPE '7' /* reserved */ + +/* GNU tar extensions */ + +#define GNUTYPE_DUMPDIR 'D' /* file names from dumped directory */ +#define GNUTYPE_LONGLINK 'K' /* long link name */ +#define GNUTYPE_LONGNAME 'L' /* long file name */ +#define GNUTYPE_MULTIVOL 'M' /* continuation of file from another volume */ +#define GNUTYPE_NAMES 'N' /* file name that does not fit into main hdr */ +#define GNUTYPE_SPARSE 'S' /* sparse file */ +#define GNUTYPE_VOLHDR 'V' /* tape/volume header */ + + +/* tar header */ + +#define BLOCKSIZE 512 +#define SHORTNAMESIZE 100 + +struct tar_header +{ /* byte offset */ + char name[100]; /* 0 */ + char mode[8]; /* 100 */ + char uid[8]; /* 108 */ + char gid[8]; /* 116 */ + char size[12]; /* 124 */ + char mtime[12]; /* 136 */ + char chksum[8]; /* 148 */ + char typeflag; /* 156 */ + char linkname[100]; /* 157 */ + char magic[6]; /* 257 */ + char version[2]; /* 263 */ + char uname[32]; /* 265 */ + char gname[32]; /* 297 */ + char devmajor[8]; /* 329 */ + char devminor[8]; /* 337 */ + char prefix[155]; /* 345 */ + /* 500 */ +}; + +union tar_buffer +{ + char buffer[BLOCKSIZE]; + struct tar_header header; +}; + +struct attr_item +{ + struct attr_item *next; + char *fname; + int mode; + time_t time; +}; + +enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID }; + +char *TGZfname OF((const char *)); +void TGZnotfound OF((const char *)); + +int getoct OF((char *, int)); +char *strtime OF((time_t *)); +int setfiletime OF((char *, time_t)); +void push_attr OF((struct attr_item **, char *, int, time_t)); +void restore_attr OF((struct attr_item **)); + +int ExprMatch OF((char *, char *)); + +int makedir OF((char *)); +int matchname OF((int, int, char **, char *)); + +void error OF((const char *)); +int tar OF((gzFile, int, int, int, char **)); + +void help OF((int)); +int main OF((int, char **)); + +char *prog; + +const char *TGZsuffix[] = { "\0", ".tar", ".tar.gz", ".taz", ".tgz", NULL }; + +/* return the file name of the TGZ archive */ +/* or NULL if it does not exist */ + +char *TGZfname (const char *arcname) +{ + static char buffer[1024]; + int origlen,i; + + strcpy(buffer,arcname); + origlen = strlen(buffer); + + for (i=0; TGZsuffix[i]; i++) + { + strcpy(buffer+origlen,TGZsuffix[i]); + if (access(buffer,F_OK) == 0) + return buffer; + } + return NULL; +} + + +/* error message for the filename */ + +void TGZnotfound (const char *arcname) +{ + int i; + + fprintf(stderr,"%s: Couldn't find ",prog); + for (i=0;TGZsuffix[i];i++) + fprintf(stderr,(TGZsuffix[i+1]) ? "%s%s, " : "or %s%s\n", + arcname, + TGZsuffix[i]); + exit(1); +} + + +/* convert octal digits to int */ +/* on error return -1 */ + +int getoct (char *p,int width) +{ + int result = 0; + char c; + + while (width--) + { + c = *p++; + if (c == 0) + break; + if (c == ' ') + continue; + if (c < '0' || c > '7') + return -1; + result = result * 8 + (c - '0'); + } + return result; +} + + +/* convert time_t to string */ +/* use the "YYYY/MM/DD hh:mm:ss" format */ + +char *strtime (time_t *t) +{ + struct tm *local; + static char result[32]; + + local = localtime(t); + sprintf(result,"%4d/%02d/%02d %02d:%02d:%02d", + local->tm_year+1900, local->tm_mon+1, local->tm_mday, + local->tm_hour, local->tm_min, local->tm_sec); + return result; +} + + +/* set file time */ + +int setfiletime (char *fname,time_t ftime) +{ +#ifdef WIN32 + static int isWinNT = -1; + SYSTEMTIME st; + FILETIME locft, modft; + struct tm *loctm; + HANDLE hFile; + int result; + + loctm = localtime(&ftime); + if (loctm == NULL) + return -1; + + st.wYear = (WORD)loctm->tm_year + 1900; + st.wMonth = (WORD)loctm->tm_mon + 1; + st.wDayOfWeek = (WORD)loctm->tm_wday; + st.wDay = (WORD)loctm->tm_mday; + st.wHour = (WORD)loctm->tm_hour; + st.wMinute = (WORD)loctm->tm_min; + st.wSecond = (WORD)loctm->tm_sec; + st.wMilliseconds = 0; + if (!SystemTimeToFileTime(&st, &locft) || + !LocalFileTimeToFileTime(&locft, &modft)) + return -1; + + if (isWinNT < 0) + isWinNT = (GetVersion() < 0x80000000) ? 1 : 0; + hFile = CreateFile(fname, GENERIC_WRITE, 0, NULL, OPEN_EXISTING, + (isWinNT ? FILE_FLAG_BACKUP_SEMANTICS : 0), + NULL); + if (hFile == INVALID_HANDLE_VALUE) + return -1; + result = SetFileTime(hFile, NULL, NULL, &modft) ? 0 : -1; + CloseHandle(hFile); + return result; +#else + struct utimbuf settime; + + settime.actime = settime.modtime = ftime; + return utime(fname,&settime); +#endif +} + + +/* push file attributes */ + +void push_attr(struct attr_item **list,char *fname,int mode,time_t time) +{ + struct attr_item *item; + + item = (struct attr_item *)malloc(sizeof(struct attr_item)); + if (item == NULL) + error("Out of memory"); + item->fname = strdup(fname); + item->mode = mode; + item->time = time; + item->next = *list; + *list = item; +} + + +/* restore file attributes */ + +void restore_attr(struct attr_item **list) +{ + struct attr_item *item, *prev; + + for (item = *list; item != NULL; ) + { + setfiletime(item->fname,item->time); + chmod(item->fname,item->mode); + prev = item; + item = item->next; + free(prev); + } + *list = NULL; +} + + +/* match regular expression */ + +#define ISSPECIAL(c) (((c) == '*') || ((c) == '/')) + +int ExprMatch (char *string,char *expr) +{ + while (1) + { + if (ISSPECIAL(*expr)) + { + if (*expr == '/') + { + if (*string != '\\' && *string != '/') + return 0; + string ++; expr++; + } + else if (*expr == '*') + { + if (*expr ++ == 0) + return 1; + while (*++string != *expr) + if (*string == 0) + return 0; + } + } + else + { + if (*string != *expr) + return 0; + if (*expr++ == 0) + return 1; + string++; + } + } +} + + +/* recursive mkdir */ +/* abort on ENOENT; ignore other errors like "directory already exists" */ +/* return 1 if OK */ +/* 0 on error */ + +int makedir (char *newdir) +{ + char *buffer = strdup(newdir); + char *p; + int len = strlen(buffer); + + if (len <= 0) { + free(buffer); + return 0; + } + if (buffer[len-1] == '/') { + buffer[len-1] = '\0'; + } + if (mkdir(buffer, 0755) == 0) + { + free(buffer); + return 1; + } + + p = buffer+1; + while (1) + { + char hold; + + while(*p && *p != '\\' && *p != '/') + p++; + hold = *p; + *p = 0; + if ((mkdir(buffer, 0755) == -1) && (errno == ENOENT)) + { + fprintf(stderr,"%s: Couldn't create directory %s\n",prog,buffer); + free(buffer); + return 0; + } + if (hold == 0) + break; + *p++ = hold; + } + free(buffer); + return 1; +} + + +int matchname (int arg,int argc,char **argv,char *fname) +{ + if (arg == argc) /* no arguments given (untgz tgzarchive) */ + return 1; + + while (arg < argc) + if (ExprMatch(fname,argv[arg++])) + return 1; + + return 0; /* ignore this for the moment being */ +} + + +/* tar file list or extract */ + +int tar (gzFile in,int action,int arg,int argc,char **argv) +{ + union tar_buffer buffer; + int len; + int err; + int getheader = 1; + int remaining = 0; + FILE *outfile = NULL; + char fname[BLOCKSIZE]; + int tarmode; + time_t tartime; + struct attr_item *attributes = NULL; + + if (action == TGZ_LIST) + printf(" date time size file\n" + " ---------- -------- --------- -------------------------------------\n"); + while (1) + { + len = gzread(in, &buffer, BLOCKSIZE); + if (len < 0) + error(gzerror(in, &err)); + /* + * Always expect complete blocks to process + * the tar information. + */ + if (len != BLOCKSIZE) + { + action = TGZ_INVALID; /* force error exit */ + remaining = 0; /* force I/O cleanup */ + } + + /* + * If we have to get a tar header + */ + if (getheader >= 1) + { + /* + * if we met the end of the tar + * or the end-of-tar block, + * we are done + */ + if (len == 0 || buffer.header.name[0] == 0) + break; + + tarmode = getoct(buffer.header.mode,8); + tartime = (time_t)getoct(buffer.header.mtime,12); + if (tarmode == -1 || tartime == (time_t)-1) + { + buffer.header.name[0] = 0; + action = TGZ_INVALID; + } + + if (getheader == 1) + { + strncpy(fname,buffer.header.name,SHORTNAMESIZE); + if (fname[SHORTNAMESIZE-1] != 0) + fname[SHORTNAMESIZE] = 0; + } + else + { + /* + * The file name is longer than SHORTNAMESIZE + */ + if (strncmp(fname,buffer.header.name,SHORTNAMESIZE-1) != 0) + error("bad long name"); + getheader = 1; + } + + /* + * Act according to the type flag + */ + switch (buffer.header.typeflag) + { + case DIRTYPE: + if (action == TGZ_LIST) + printf(" %s %s\n",strtime(&tartime),fname); + if (action == TGZ_EXTRACT) + { + makedir(fname); + push_attr(&attributes,fname,tarmode,tartime); + } + break; + case REGTYPE: + case AREGTYPE: + remaining = getoct(buffer.header.size,12); + if (remaining == -1) + { + action = TGZ_INVALID; + break; + } + if (action == TGZ_LIST) + printf(" %s %9d %s\n",strtime(&tartime),remaining,fname); + else if (action == TGZ_EXTRACT) + { + if (matchname(arg,argc,argv,fname)) + { + outfile = fopen(fname,"wb"); + if (outfile == NULL) { + /* try creating directory */ + char *p = strrchr(fname, '/'); + if (p != NULL) { + *p = '\0'; + makedir(fname); + *p = '/'; + outfile = fopen(fname,"wb"); + } + } + if (outfile != NULL) + printf("Extracting %s\n",fname); + else + fprintf(stderr, "%s: Couldn't create %s",prog,fname); + } + else + outfile = NULL; + } + getheader = 0; + break; + case GNUTYPE_LONGLINK: + case GNUTYPE_LONGNAME: + remaining = getoct(buffer.header.size,12); + if (remaining < 0 || remaining >= BLOCKSIZE) + { + action = TGZ_INVALID; + break; + } + len = gzread(in, fname, BLOCKSIZE); + if (len < 0) + error(gzerror(in, &err)); + if (fname[BLOCKSIZE-1] != 0 || (int)strlen(fname) > remaining) + { + action = TGZ_INVALID; + break; + } + getheader = 2; + break; + default: + if (action == TGZ_LIST) + printf(" %s <---> %s\n",strtime(&tartime),fname); + break; + } + } + else + { + unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining; + + if (outfile != NULL) + { + if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes) + { + fprintf(stderr, + "%s: Error writing %s -- skipping\n",prog,fname); + fclose(outfile); + outfile = NULL; + remove(fname); + } + } + remaining -= bytes; + } + + if (remaining == 0) + { + getheader = 1; + if (outfile != NULL) + { + fclose(outfile); + outfile = NULL; + if (action != TGZ_INVALID) + push_attr(&attributes,fname,tarmode,tartime); + } + } + + /* + * Abandon if errors are found + */ + if (action == TGZ_INVALID) + { + error("broken archive"); + break; + } + } + + /* + * Restore file modes and time stamps + */ + restore_attr(&attributes); + + if (gzclose(in) != Z_OK) + error("failed gzclose"); + + return 0; +} + + +/* ============================================================ */ + +void help(int exitval) +{ + printf("untgz version 0.2.1\n" + " using zlib version %s\n\n", + zlibVersion()); + printf("Usage: untgz file.tgz extract all files\n" + " untgz file.tgz fname ... extract selected files\n" + " untgz -l file.tgz list archive contents\n" + " untgz -h display this help\n"); + exit(exitval); +} + +void error(const char *msg) +{ + fprintf(stderr, "%s: %s\n", prog, msg); + exit(1); +} + + +/* ============================================================ */ + +#if defined(WIN32) && defined(__GNUC__) +int _CRT_glob = 0; /* disable argument globbing in MinGW */ +#endif + +int main(int argc,char **argv) +{ + int action = TGZ_EXTRACT; + int arg = 1; + char *TGZfile; + gzFile *f; + + prog = strrchr(argv[0],'\\'); + if (prog == NULL) + { + prog = strrchr(argv[0],'/'); + if (prog == NULL) + { + prog = strrchr(argv[0],':'); + if (prog == NULL) + prog = argv[0]; + else + prog++; + } + else + prog++; + } + else + prog++; + + if (argc == 1) + help(0); + + if (strcmp(argv[arg],"-l") == 0) + { + action = TGZ_LIST; + if (argc == ++arg) + help(0); + } + else if (strcmp(argv[arg],"-h") == 0) + { + help(0); + } + + if ((TGZfile = TGZfname(argv[arg])) == NULL) + TGZnotfound(argv[arg]); + + ++arg; + if ((action == TGZ_LIST) && (arg != argc)) + help(1); + +/* + * Process the TGZ file + */ + switch(action) + { + case TGZ_LIST: + case TGZ_EXTRACT: + f = gzopen(TGZfile,"rb"); + if (f == NULL) + { + fprintf(stderr,"%s: Couldn't gzopen %s\n",prog,TGZfile); + return 1; + } + exit(tar(f, action, arg, argc, argv)); + break; + + default: + error("Unknown option"); + exit(1); + } + + return 0; +} diff --git a/common/dist/zlib/contrib/vstudio/readme.txt b/common/dist/zlib/contrib/vstudio/readme.txt new file mode 100644 index 000000000..16159f9cd --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/readme.txt @@ -0,0 +1,73 @@ +Building instructions for the DLL versions of Zlib 1.2.3 +======================================================== + +This directory contains projects that build zlib and minizip using +Microsoft Visual C++ 7.0/7.1, and Visual C++ . + +You don't need to build these projects yourself. You can download the +binaries from: + http://www.winimage.com/zLibDll + +More information can be found at this site. + + +Build instructions for Visual Studio 7.x (32 bits) +-------------------------------------------------- +- Uncompress current zlib, including all contrib/* files +- Download the crtdll library from + http://www.winimage.com/zLibDll/crtdll.zip + Unzip crtdll.zip to extract crtdll.lib on contrib\vstudio\vc7. +- Open contrib\vstudio\vc7\zlibvc.sln with Microsoft Visual C++ 7.x + (Visual Studio .Net 2002 or 2003). + +Build instructions for Visual Studio 2005 (32 bits or 64 bits) +-------------------------------------------------------------- +- Uncompress current zlib, including all contrib/* files +- For 32 bits only: download the crtdll library from + http://www.winimage.com/zLibDll/crtdll.zip + Unzip crtdll.zip to extract crtdll.lib on contrib\vstudio\vc8. +- Open contrib\vstudio\vc8\zlibvc.sln with Microsoft Visual C++ 8.0 + +Build instructions for Visual Studio 2005 64 bits, PSDK compiler +---------------------------------------------------------------- +at the time of writing this text file, Visual Studio 2005 (and + Microsoft Visual C++ 8.0) is on the beta 2 stage. +Using you can get the free 64 bits compiler from Platform SDK, + which is NOT a beta, and compile using the Visual studio 2005 IDE +see http://www.winimage.com/misc/sdk64onvs2005/ for instruction + +- Uncompress current zlib, including all contrib/* files +- start Visual Studio 2005 from a platform SDK command prompt, using + the /useenv switch +- Open contrib\vstudio\vc8\zlibvc.sln with Microsoft Visual C++ 8.0 + + +Important +--------- +- To use zlibwapi.dll in your application, you must define the + macro ZLIB_WINAPI when compiling your application's source files. + + +Additional notes +---------------- +- This DLL, named zlibwapi.dll, is compatible to the old zlib.dll built + by Gilles Vollant from the zlib 1.1.x sources, and distributed at + http://www.winimage.com/zLibDll + It uses the WINAPI calling convention for the exported functions, and + includes the minizip functionality. If your application needs that + particular build of zlib.dll, you can rename zlibwapi.dll to zlib.dll. + +- The new DLL was renamed because there exist several incompatible + versions of zlib.dll on the Internet. + +- There is also an official DLL build of zlib, named zlib1.dll. This one + is exporting the functions using the CDECL convention. See the file + win32\DLL_FAQ.txt found in this zlib distribution. + +- There used to be a ZLIB_DLL macro in zlib 1.1.x, but now this symbol + has a slightly different effect. To avoid compatibility problems, do + not define it here. + + +Gilles Vollant +info@winimage.com diff --git a/common/dist/zlib/contrib/vstudio/vc7/miniunz.vcproj b/common/dist/zlib/contrib/vstudio/vc7/miniunz.vcproj new file mode 100644 index 000000000..ad5117c84 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc7/miniunz.vcproj @@ -0,0 +1,126 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/vstudio/vc7/minizip.vcproj b/common/dist/zlib/contrib/vstudio/vc7/minizip.vcproj new file mode 100644 index 000000000..fb5b6320d --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc7/minizip.vcproj @@ -0,0 +1,126 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/vstudio/vc7/testzlib.vcproj b/common/dist/zlib/contrib/vstudio/vc7/testzlib.vcproj new file mode 100644 index 000000000..97bc3e8c8 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc7/testzlib.vcproj @@ -0,0 +1,126 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/vstudio/vc7/zlib.rc b/common/dist/zlib/contrib/vstudio/vc7/zlib.rc new file mode 100644 index 000000000..72cb8b4c3 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc7/zlib.rc @@ -0,0 +1,32 @@ +#include + +#define IDR_VERSION1 1 +IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE + FILEVERSION 1,2,3,0 + PRODUCTVERSION 1,2,3,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK + FILEFLAGS 0 + FILEOS VOS_DOS_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + + BEGIN + VALUE "FileDescription", "zlib data compression library\0" + VALUE "FileVersion", "1.2.3.0\0" + VALUE "InternalName", "zlib\0" + VALUE "OriginalFilename", "zlib.dll\0" + VALUE "ProductName", "ZLib.DLL\0" + VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0" + VALUE "LegalCopyright", "(C) 1995-2003 Jean-loup Gailly & Mark Adler\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/common/dist/zlib/contrib/vstudio/vc7/zlibstat.vcproj b/common/dist/zlib/contrib/vstudio/vc7/zlibstat.vcproj new file mode 100644 index 000000000..766d7a4d6 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc7/zlibstat.vcproj @@ -0,0 +1,246 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/vstudio/vc7/zlibvc.def b/common/dist/zlib/contrib/vstudio/vc7/zlibvc.def new file mode 100644 index 000000000..a40e71541 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc7/zlibvc.def @@ -0,0 +1,92 @@ + +VERSION 1.23 + +HEAPSIZE 1048576,8192 + +EXPORTS + adler32 @1 + compress @2 + crc32 @3 + deflate @4 + deflateCopy @5 + deflateEnd @6 + deflateInit2_ @7 + deflateInit_ @8 + deflateParams @9 + deflateReset @10 + deflateSetDictionary @11 + gzclose @12 + gzdopen @13 + gzerror @14 + gzflush @15 + gzopen @16 + gzread @17 + gzwrite @18 + inflate @19 + inflateEnd @20 + inflateInit2_ @21 + inflateInit_ @22 + inflateReset @23 + inflateSetDictionary @24 + inflateSync @25 + uncompress @26 + zlibVersion @27 + gzprintf @28 + gzputc @29 + gzgetc @30 + gzseek @31 + gzrewind @32 + gztell @33 + gzeof @34 + gzsetparams @35 + zError @36 + inflateSyncPoint @37 + get_crc_table @38 + compress2 @39 + gzputs @40 + gzgets @41 + inflateCopy @42 + inflateBackInit_ @43 + inflateBack @44 + inflateBackEnd @45 + compressBound @46 + deflateBound @47 + gzclearerr @48 + gzungetc @49 + zlibCompileFlags @50 + deflatePrime @51 + + unzOpen @61 + unzClose @62 + unzGetGlobalInfo @63 + unzGetCurrentFileInfo @64 + unzGoToFirstFile @65 + unzGoToNextFile @66 + unzOpenCurrentFile @67 + unzReadCurrentFile @68 + unzOpenCurrentFile3 @69 + unztell @70 + unzeof @71 + unzCloseCurrentFile @72 + unzGetGlobalComment @73 + unzStringFileNameCompare @74 + unzLocateFile @75 + unzGetLocalExtrafield @76 + unzOpen2 @77 + unzOpenCurrentFile2 @78 + unzOpenCurrentFilePassword @79 + + zipOpen @80 + zipOpenNewFileInZip @81 + zipWriteInFileInZip @82 + zipCloseFileInZip @83 + zipClose @84 + zipOpenNewFileInZip2 @86 + zipCloseFileInZipRaw @87 + zipOpen2 @88 + zipOpenNewFileInZip3 @89 + + unzGetFilePos @100 + unzGoToFilePos @101 + + fill_win32_filefunc @110 diff --git a/common/dist/zlib/contrib/vstudio/vc7/zlibvc.sln b/common/dist/zlib/contrib/vstudio/vc7/zlibvc.sln new file mode 100644 index 000000000..927b42b7b --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc7/zlibvc.sln @@ -0,0 +1,78 @@ +Microsoft Visual Studio Solution File, Format Version 7.00 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testZlibDll", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}" +EndProject +Global + GlobalSection(SolutionConfiguration) = preSolution + ConfigName.0 = Debug + ConfigName.1 = Release + ConfigName.2 = ReleaseAxp + ConfigName.3 = ReleaseWithoutAsm + ConfigName.4 = ReleaseWithoutCrtdll + EndGlobalSection + GlobalSection(ProjectDependencies) = postSolution + EndGlobalSection + GlobalSection(ProjectConfiguration) = postSolution + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug.ActiveCfg = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug.Build.0 = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release.ActiveCfg = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release.Build.0 = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseAxp.ActiveCfg = ReleaseAxp|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseAxp.Build.0 = ReleaseAxp|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm.ActiveCfg = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm.Build.0 = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutCrtdll.ActiveCfg = ReleaseAxp|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutCrtdll.Build.0 = ReleaseAxp|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug.ActiveCfg = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug.Build.0 = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release.ActiveCfg = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release.Build.0 = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseAxp.ActiveCfg = ReleaseAxp|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseAxp.Build.0 = ReleaseAxp|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm.ActiveCfg = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm.Build.0 = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutCrtdll.ActiveCfg = ReleaseWithoutCrtdll|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutCrtdll.Build.0 = ReleaseWithoutCrtdll|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug.ActiveCfg = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug.Build.0 = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release.Build.0 = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAxp.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAxp.Build.0 = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm.Build.0 = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutCrtdll.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutCrtdll.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseAxp.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseAxp.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutCrtdll.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutCrtdll.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Debug.ActiveCfg = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Debug.Build.0 = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Release.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Release.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseAxp.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseAxp.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutAsm.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutAsm.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutCrtdll.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutCrtdll.Build.0 = Release|Win32 + EndGlobalSection + GlobalSection(ExtensibilityGlobals) = postSolution + EndGlobalSection + GlobalSection(ExtensibilityAddIns) = postSolution + EndGlobalSection +EndGlobal diff --git a/common/dist/zlib/contrib/vstudio/vc7/zlibvc.vcproj b/common/dist/zlib/contrib/vstudio/vc7/zlibvc.vcproj new file mode 100644 index 000000000..8533b4947 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc7/zlibvc.vcproj @@ -0,0 +1,445 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/vstudio/vc8/miniunz.vcproj b/common/dist/zlib/contrib/vstudio/vc8/miniunz.vcproj new file mode 100644 index 000000000..4af53e8a3 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc8/miniunz.vcproj @@ -0,0 +1,566 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/vstudio/vc8/minizip.vcproj b/common/dist/zlib/contrib/vstudio/vc8/minizip.vcproj new file mode 100644 index 000000000..85f64c4d2 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc8/minizip.vcproj @@ -0,0 +1,563 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/vstudio/vc8/testzlib.vcproj b/common/dist/zlib/contrib/vstudio/vc8/testzlib.vcproj new file mode 100644 index 000000000..68c353991 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc8/testzlib.vcproj @@ -0,0 +1,948 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/vstudio/vc8/testzlibdll.vcproj b/common/dist/zlib/contrib/vstudio/vc8/testzlibdll.vcproj new file mode 100644 index 000000000..f38ab5e08 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc8/testzlibdll.vcproj @@ -0,0 +1,567 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/vstudio/vc8/zlib.rc b/common/dist/zlib/contrib/vstudio/vc8/zlib.rc new file mode 100644 index 000000000..72cb8b4c3 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc8/zlib.rc @@ -0,0 +1,32 @@ +#include + +#define IDR_VERSION1 1 +IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE + FILEVERSION 1,2,3,0 + PRODUCTVERSION 1,2,3,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK + FILEFLAGS 0 + FILEOS VOS_DOS_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + + BEGIN + VALUE "FileDescription", "zlib data compression library\0" + VALUE "FileVersion", "1.2.3.0\0" + VALUE "InternalName", "zlib\0" + VALUE "OriginalFilename", "zlib.dll\0" + VALUE "ProductName", "ZLib.DLL\0" + VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0" + VALUE "LegalCopyright", "(C) 1995-2003 Jean-loup Gailly & Mark Adler\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/common/dist/zlib/contrib/vstudio/vc8/zlibstat.vcproj b/common/dist/zlib/contrib/vstudio/vc8/zlibstat.vcproj new file mode 100644 index 000000000..fb97037ac --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc8/zlibstat.vcproj @@ -0,0 +1,870 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/contrib/vstudio/vc8/zlibvc.def b/common/dist/zlib/contrib/vstudio/vc8/zlibvc.def new file mode 100644 index 000000000..a40e71541 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc8/zlibvc.def @@ -0,0 +1,92 @@ + +VERSION 1.23 + +HEAPSIZE 1048576,8192 + +EXPORTS + adler32 @1 + compress @2 + crc32 @3 + deflate @4 + deflateCopy @5 + deflateEnd @6 + deflateInit2_ @7 + deflateInit_ @8 + deflateParams @9 + deflateReset @10 + deflateSetDictionary @11 + gzclose @12 + gzdopen @13 + gzerror @14 + gzflush @15 + gzopen @16 + gzread @17 + gzwrite @18 + inflate @19 + inflateEnd @20 + inflateInit2_ @21 + inflateInit_ @22 + inflateReset @23 + inflateSetDictionary @24 + inflateSync @25 + uncompress @26 + zlibVersion @27 + gzprintf @28 + gzputc @29 + gzgetc @30 + gzseek @31 + gzrewind @32 + gztell @33 + gzeof @34 + gzsetparams @35 + zError @36 + inflateSyncPoint @37 + get_crc_table @38 + compress2 @39 + gzputs @40 + gzgets @41 + inflateCopy @42 + inflateBackInit_ @43 + inflateBack @44 + inflateBackEnd @45 + compressBound @46 + deflateBound @47 + gzclearerr @48 + gzungetc @49 + zlibCompileFlags @50 + deflatePrime @51 + + unzOpen @61 + unzClose @62 + unzGetGlobalInfo @63 + unzGetCurrentFileInfo @64 + unzGoToFirstFile @65 + unzGoToNextFile @66 + unzOpenCurrentFile @67 + unzReadCurrentFile @68 + unzOpenCurrentFile3 @69 + unztell @70 + unzeof @71 + unzCloseCurrentFile @72 + unzGetGlobalComment @73 + unzStringFileNameCompare @74 + unzLocateFile @75 + unzGetLocalExtrafield @76 + unzOpen2 @77 + unzOpenCurrentFile2 @78 + unzOpenCurrentFilePassword @79 + + zipOpen @80 + zipOpenNewFileInZip @81 + zipWriteInFileInZip @82 + zipCloseFileInZip @83 + zipClose @84 + zipOpenNewFileInZip2 @86 + zipCloseFileInZipRaw @87 + zipOpen2 @88 + zipOpenNewFileInZip3 @89 + + unzGetFilePos @100 + unzGoToFilePos @101 + + fill_win32_filefunc @110 diff --git a/common/dist/zlib/contrib/vstudio/vc8/zlibvc.sln b/common/dist/zlib/contrib/vstudio/vc8/zlibvc.sln new file mode 100644 index 000000000..a815a5549 --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc8/zlibvc.sln @@ -0,0 +1,144 @@ + +Microsoft Visual Studio Solution File, Format Version 9.00 +# Visual Studio 2005 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "TestZlibDll", "testzlibdll.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}" + ProjectSection(ProjectDependencies) = postProject + {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}" + ProjectSection(ProjectDependencies) = postProject + {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}" + ProjectSection(ProjectDependencies) = postProject + {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D} + EndProjectSection +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Itanium = Debug|Itanium + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Itanium = Release|Itanium + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium + ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32 + ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.Build.0 = Debug|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.Build.0 = Release|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = ReleaseWithoutAsm|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.Build.0 = Debug|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.Build.0 = Release|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.Build.0 = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.Build.0 = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|Itanium + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/common/dist/zlib/contrib/vstudio/vc8/zlibvc.vcproj b/common/dist/zlib/contrib/vstudio/vc8/zlibvc.vcproj new file mode 100644 index 000000000..e717011df --- /dev/null +++ b/common/dist/zlib/contrib/vstudio/vc8/zlibvc.vcproj @@ -0,0 +1,1219 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/common/dist/zlib/crc32.c b/common/dist/zlib/crc32.c new file mode 100644 index 000000000..ec79330c6 --- /dev/null +++ b/common/dist/zlib/crc32.c @@ -0,0 +1,435 @@ +/* $NetBSD: crc32.c,v 1.4 2006/02/18 18:39:58 dsl Exp $ */ + +/* crc32.c -- compute the CRC-32 of a data stream + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Thanks to Rodney Brown for his contribution of faster + * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing + * tables for updating the shift register in one step with three exclusive-ors + * instead of four steps with four exclusive-ors. This results in about a + * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3. + */ + +/* @(#) Id */ + +/* + Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore + protection on the static variables used to control the first-use generation + of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should + first call get_crc_table() to initialize the tables before allowing more than + one thread to use crc32(). + */ + +#ifdef MAKECRCH +# include +# ifndef DYNAMIC_CRC_TABLE +# define DYNAMIC_CRC_TABLE +# endif /* !DYNAMIC_CRC_TABLE */ +#endif /* MAKECRCH */ + +#include "zutil.h" /* for STDC and FAR definitions */ + +#define local static + +#if defined(__NetBSD__) && defined(_STANDALONE) +#define NOBYFOUR +#define DYNAMIC_CRC_TABLE +#endif + +/* Find a four-byte integer type for crc32_little() and crc32_big(). */ +#ifndef NOBYFOUR +#if defined(__NetBSD__) && defined(_KERNEL) +# define BYFOUR + typedef uint32_t u4; +#else +# ifdef STDC /* need ANSI C limits.h to determine sizes */ +# include +# define BYFOUR +# if (UINT_MAX == 0xffffffffUL) + typedef unsigned int u4; +# else +# if (ULONG_MAX == 0xffffffffUL) + typedef unsigned long u4; +# else +# if (USHRT_MAX == 0xffffffffUL) + typedef unsigned short u4; +# else +# undef BYFOUR /* can't find a four-byte integer type! */ +# endif +# endif +# endif +# endif /* STDC */ +#endif /* __NetBSD__ && _KERNEL */ +#endif /* !NOBYFOUR */ + +/* Definitions for doing the crc four data bytes at a time. */ +#ifdef BYFOUR +# define REV(w) (((w)>>24)+(((w)>>8)&0xff00)+ \ + (((w)&0xff00)<<8)+(((w)&0xff)<<24)) + local unsigned long crc32_little OF((unsigned long, + const unsigned char FAR *, unsigned)); + local unsigned long crc32_big OF((unsigned long, + const unsigned char FAR *, unsigned)); +# define TBLS 8 +#else +# define TBLS 1 +#endif /* BYFOUR */ + +/* Local functions for crc concatenation */ +local unsigned long gf2_matrix_times OF((unsigned long *mat, + unsigned long vec)); +local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); + +#ifdef DYNAMIC_CRC_TABLE + +local volatile int crc_table_empty = 1; +local unsigned long FAR crc_table[TBLS][256]; +local void make_crc_table OF((void)); +#ifdef MAKECRCH + local void write_table OF((FILE *, const unsigned long FAR *)); +#endif /* MAKECRCH */ +/* + Generate tables for a byte-wise 32-bit CRC calculation on the polynomial: + x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. + + Polynomials over GF(2) are represented in binary, one bit per coefficient, + with the lowest powers in the most significant bit. Then adding polynomials + is just exclusive-or, and multiplying a polynomial by x is a right shift by + one. If we call the above polynomial p, and represent a byte as the + polynomial q, also with the lowest power in the most significant bit (so the + byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, + where a mod b means the remainder after dividing a by b. + + This calculation is done using the shift-register method of multiplying and + taking the remainder. The register is initialized to zero, and for each + incoming bit, x^32 is added mod p to the register if the bit is a one (where + x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by + x (which is shifting right by one and adding x^32 mod p if the bit shifted + out is a one). We start with the highest power (least significant bit) of + q and repeat for all eight bits of q. + + The first table is simply the CRC of all possible eight bit values. This is + all the information needed to generate CRCs on data a byte at a time for all + combinations of CRC register values and incoming bytes. The remaining tables + allow for word-at-a-time CRC calculation for both big-endian and little- + endian machines, where a word is four bytes. +*/ +local void make_crc_table() +{ + unsigned long c; + int n, k; + unsigned long poly; /* polynomial exclusive-or pattern */ + /* terms of polynomial defining this crc (except x^32): */ + static volatile int first = 1; /* flag to limit concurrent making */ + static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; + + /* See if another task is already doing this (not thread-safe, but better + than nothing -- significantly reduces duration of vulnerability in + case the advice about DYNAMIC_CRC_TABLE is ignored) */ + if (first) { + first = 0; + + /* make exclusive-or pattern from polynomial (0xedb88320UL) */ + poly = 0UL; + for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++) + poly |= 1UL << (31 - p[n]); + + /* generate a crc for every 8-bit value */ + for (n = 0; n < 256; n++) { + c = (unsigned long)n; + for (k = 0; k < 8; k++) + c = c & 1 ? poly ^ (c >> 1) : c >> 1; + crc_table[0][n] = c; + } + +#ifdef BYFOUR + /* generate crc for each value followed by one, two, and three zeros, + and then the byte reversal of those as well as the first table */ + for (n = 0; n < 256; n++) { + c = crc_table[0][n]; + crc_table[4][n] = REV(c); + for (k = 1; k < 4; k++) { + c = crc_table[0][c & 0xff] ^ (c >> 8); + crc_table[k][n] = c; + crc_table[k + 4][n] = REV(c); + } + } +#endif /* BYFOUR */ + + crc_table_empty = 0; + } + else { /* not first */ + /* wait for the other guy to finish (not efficient, but rare) */ + while (crc_table_empty) + ; + } + +#ifdef MAKECRCH + /* write out CRC tables to crc32.h */ + { + FILE *out; + + out = fopen("crc32.h", "w"); + if (out == NULL) return; + fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n"); + fprintf(out, " * Generated automatically by crc32.c\n */\n\n"); + fprintf(out, "local const unsigned long FAR "); + fprintf(out, "crc_table[TBLS][256] =\n{\n {\n"); + write_table(out, crc_table[0]); +# ifdef BYFOUR + fprintf(out, "#ifdef BYFOUR\n"); + for (k = 1; k < 8; k++) { + fprintf(out, " },\n {\n"); + write_table(out, crc_table[k]); + } + fprintf(out, "#endif\n"); +# endif /* BYFOUR */ + fprintf(out, " }\n};\n"); + fclose(out); + } +#endif /* MAKECRCH */ +} + +#ifdef MAKECRCH +local void write_table(out, table) + FILE *out; + const unsigned long FAR *table; +{ + int n; + + for (n = 0; n < 256; n++) + fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n], + n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", ")); +} +#endif /* MAKECRCH */ + +#else /* !DYNAMIC_CRC_TABLE */ +/* ======================================================================== + * Tables of CRC-32s of all single-byte values, made by make_crc_table(). + */ +#include "crc32.h" +#endif /* DYNAMIC_CRC_TABLE */ + +/* ========================================================================= + * This function can be used by asm versions of crc32() + */ +const unsigned long FAR * ZEXPORT get_crc_table() +{ +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) + make_crc_table(); +#endif /* DYNAMIC_CRC_TABLE */ + return (const unsigned long FAR *)crc_table; +} + +/* ========================================================================= */ +#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8) +#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1 + +/* ========================================================================= */ +unsigned long ZEXPORT crc32(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + unsigned len; +{ + if (buf == Z_NULL) return 0UL; + +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) + make_crc_table(); +#endif /* DYNAMIC_CRC_TABLE */ + +#ifdef BYFOUR + if (sizeof(void *) == sizeof(z_ptrdiff_t)) { + u4 endian; + + endian = 1; + if (*((unsigned char *)(&endian))) + return crc32_little(crc, buf, len); + else + return crc32_big(crc, buf, len); + } +#endif /* BYFOUR */ + crc = crc ^ 0xffffffffUL; + while (len >= 8) { + DO8; + len -= 8; + } + if (len) do { + DO1; + } while (--len); + return crc ^ 0xffffffffUL; +} + +#ifdef BYFOUR + +/* ========================================================================= */ +#define DOLIT4 c ^= *buf4++; \ + c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \ + crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24] +#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4 + +/* ========================================================================= */ +local unsigned long crc32_little(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + unsigned len; +{ + register u4 c; + register const u4 FAR *buf4; + + c = (u4)crc; + c = ~c; + while (len && ((z_ptrdiff_t)buf & 3)) { + c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); + len--; + } + + buf4 = (const u4 FAR *)(const void FAR *)buf; + while (len >= 32) { + DOLIT32; + len -= 32; + } + while (len >= 4) { + DOLIT4; + len -= 4; + } + buf = (const unsigned char FAR *)buf4; + + if (len) do { + c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); + } while (--len); + c = ~c; + return (unsigned long)c; +} + +/* ========================================================================= */ +#define DOBIG4 c ^= *++buf4; \ + c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \ + crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24] +#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4 + +/* ========================================================================= */ +local unsigned long crc32_big(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + unsigned len; +{ + register u4 c; + register const u4 FAR *buf4; + + c = REV((u4)crc); + c = ~c; + while (len && ((z_ptrdiff_t)buf & 3)) { + c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); + len--; + } + + buf4 = (const u4 FAR *)(const void FAR *)buf; + buf4--; + while (len >= 32) { + DOBIG32; + len -= 32; + } + while (len >= 4) { + DOBIG4; + len -= 4; + } + buf4++; + buf = (const unsigned char FAR *)buf4; + + if (len) do { + c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); + } while (--len); + c = ~c; + return (unsigned long)(REV(c)); +} + +#endif /* BYFOUR */ + +#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */ + +/* ========================================================================= */ +local unsigned long gf2_matrix_times(mat, vec) + unsigned long *mat; + unsigned long vec; +{ + unsigned long sum; + + sum = 0; + while (vec) { + if (vec & 1) + sum ^= *mat; + vec >>= 1; + mat++; + } + return sum; +} + +/* ========================================================================= */ +local void gf2_matrix_square(square, mat) + unsigned long *square; + unsigned long *mat; +{ + int n; + + for (n = 0; n < GF2_DIM; n++) + square[n] = gf2_matrix_times(mat, mat[n]); +} + +/* ========================================================================= */ +uLong ZEXPORT crc32_combine(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off_t len2; +{ + int n; + unsigned long row; + unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */ + unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */ + + /* degenerate case */ + if (len2 == 0) + return crc1; + + /* put operator for one zero bit in odd */ + odd[0] = 0xedb88320L; /* CRC-32 polynomial */ + row = 1; + for (n = 1; n < GF2_DIM; n++) { + odd[n] = row; + row <<= 1; + } + + /* put operator for two zero bits in even */ + gf2_matrix_square(even, odd); + + /* put operator for four zero bits in odd */ + gf2_matrix_square(odd, even); + + /* apply len2 zeros to crc1 (first square will put the operator for one + zero byte, eight zero bits, in even) */ + do { + /* apply zeros operator for this bit of len2 */ + gf2_matrix_square(even, odd); + if (len2 & 1) + crc1 = gf2_matrix_times(even, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + if (len2 == 0) + break; + + /* another iteration of the loop with odd and even swapped */ + gf2_matrix_square(odd, even); + if (len2 & 1) + crc1 = gf2_matrix_times(odd, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + } while (len2 != 0); + + /* return combined crc */ + crc1 ^= crc2; + return crc1; +} diff --git a/common/dist/zlib/crc32.h b/common/dist/zlib/crc32.h new file mode 100644 index 000000000..49e440170 --- /dev/null +++ b/common/dist/zlib/crc32.h @@ -0,0 +1,443 @@ +/* $NetBSD: crc32.h,v 1.1.1.1 2006/01/14 20:10:27 christos Exp $ */ + +/* crc32.h -- tables for rapid CRC calculation + * Generated automatically by crc32.c + */ + +local const unsigned long FAR crc_table[TBLS][256] = +{ + { + 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL, + 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL, + 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL, + 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL, + 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL, + 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL, + 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL, + 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL, + 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL, + 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL, + 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL, + 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL, + 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL, + 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL, + 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL, + 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL, + 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL, + 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL, + 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL, + 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL, + 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL, + 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL, + 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL, + 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL, + 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL, + 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL, + 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL, + 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL, + 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL, + 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL, + 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL, + 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL, + 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL, + 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL, + 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL, + 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL, + 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL, + 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL, + 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL, + 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL, + 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL, + 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL, + 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL, + 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL, + 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL, + 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL, + 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL, + 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL, + 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL, + 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL, + 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL, + 0x2d02ef8dUL +#ifdef BYFOUR + }, + { + 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL, + 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL, + 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL, + 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL, + 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL, + 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL, + 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL, + 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL, + 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL, + 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL, + 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL, + 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL, + 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL, + 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL, + 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL, + 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL, + 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL, + 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL, + 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL, + 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL, + 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL, + 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL, + 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL, + 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL, + 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL, + 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL, + 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL, + 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL, + 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL, + 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL, + 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL, + 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL, + 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL, + 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL, + 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL, + 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL, + 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL, + 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL, + 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL, + 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL, + 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL, + 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL, + 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL, + 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL, + 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL, + 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL, + 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL, + 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL, + 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL, + 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL, + 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL, + 0x9324fd72UL + }, + { + 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL, + 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL, + 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL, + 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL, + 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL, + 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL, + 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL, + 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL, + 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL, + 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL, + 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL, + 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL, + 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL, + 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL, + 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL, + 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL, + 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL, + 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL, + 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL, + 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL, + 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL, + 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL, + 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL, + 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL, + 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL, + 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL, + 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL, + 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL, + 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL, + 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL, + 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL, + 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL, + 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL, + 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL, + 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL, + 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL, + 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL, + 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL, + 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL, + 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL, + 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL, + 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL, + 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL, + 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL, + 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL, + 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL, + 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL, + 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL, + 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL, + 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL, + 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL, + 0xbe9834edUL + }, + { + 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL, + 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL, + 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL, + 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL, + 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL, + 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL, + 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL, + 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL, + 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL, + 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL, + 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL, + 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL, + 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL, + 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL, + 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL, + 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL, + 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL, + 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL, + 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL, + 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL, + 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL, + 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL, + 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL, + 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL, + 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL, + 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL, + 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL, + 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL, + 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL, + 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL, + 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL, + 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL, + 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL, + 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL, + 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL, + 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL, + 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL, + 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL, + 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL, + 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL, + 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL, + 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL, + 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL, + 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL, + 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL, + 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL, + 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL, + 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL, + 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL, + 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL, + 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL, + 0xde0506f1UL + }, + { + 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL, + 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL, + 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL, + 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL, + 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL, + 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL, + 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL, + 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL, + 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL, + 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL, + 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL, + 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL, + 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL, + 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL, + 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL, + 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL, + 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL, + 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL, + 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL, + 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL, + 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL, + 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL, + 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL, + 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL, + 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL, + 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL, + 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL, + 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL, + 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL, + 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL, + 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL, + 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL, + 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL, + 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL, + 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL, + 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL, + 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL, + 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL, + 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL, + 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL, + 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL, + 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL, + 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL, + 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL, + 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL, + 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL, + 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL, + 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL, + 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL, + 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL, + 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL, + 0x8def022dUL + }, + { + 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL, + 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL, + 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL, + 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL, + 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL, + 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL, + 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL, + 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL, + 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL, + 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL, + 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL, + 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL, + 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL, + 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL, + 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL, + 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL, + 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL, + 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL, + 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL, + 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL, + 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL, + 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL, + 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL, + 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL, + 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL, + 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL, + 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL, + 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL, + 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL, + 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL, + 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL, + 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL, + 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL, + 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL, + 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL, + 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL, + 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL, + 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL, + 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL, + 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL, + 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL, + 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL, + 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL, + 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL, + 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL, + 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL, + 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL, + 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL, + 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL, + 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL, + 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL, + 0x72fd2493UL + }, + { + 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL, + 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL, + 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL, + 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL, + 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL, + 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL, + 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL, + 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL, + 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL, + 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL, + 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL, + 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL, + 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL, + 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL, + 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL, + 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL, + 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL, + 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL, + 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL, + 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL, + 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL, + 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL, + 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL, + 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL, + 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL, + 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL, + 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL, + 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL, + 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL, + 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL, + 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL, + 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL, + 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL, + 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL, + 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL, + 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL, + 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL, + 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL, + 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL, + 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL, + 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL, + 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL, + 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL, + 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL, + 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL, + 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL, + 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL, + 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL, + 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL, + 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL, + 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL, + 0xed3498beUL + }, + { + 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL, + 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL, + 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL, + 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL, + 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL, + 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL, + 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL, + 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL, + 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL, + 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL, + 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL, + 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL, + 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL, + 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL, + 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL, + 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL, + 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL, + 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL, + 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL, + 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL, + 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL, + 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL, + 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL, + 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL, + 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL, + 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL, + 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL, + 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL, + 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL, + 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL, + 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL, + 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL, + 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL, + 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL, + 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL, + 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL, + 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL, + 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL, + 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL, + 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL, + 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL, + 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL, + 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL, + 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL, + 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL, + 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL, + 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL, + 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL, + 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL, + 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL, + 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL, + 0xf10605deUL +#endif + } +}; diff --git a/common/dist/zlib/deflate.c b/common/dist/zlib/deflate.c new file mode 100644 index 000000000..a79e37ebf --- /dev/null +++ b/common/dist/zlib/deflate.c @@ -0,0 +1,1738 @@ +/* $NetBSD: deflate.c,v 1.3 2006/01/27 00:45:27 christos Exp $ */ + +/* deflate.c -- compress data using the deflation algorithm + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * ALGORITHM + * + * The "deflation" process depends on being able to identify portions + * of the input text which are identical to earlier input (within a + * sliding window trailing behind the input currently being processed). + * + * The most straightforward technique turns out to be the fastest for + * most input files: try all possible matches and select the longest. + * The key feature of this algorithm is that insertions into the string + * dictionary are very simple and thus fast, and deletions are avoided + * completely. Insertions are performed at each input character, whereas + * string matches are performed only when the previous match ends. So it + * is preferable to spend more time in matches to allow very fast string + * insertions and avoid deletions. The matching algorithm for small + * strings is inspired from that of Rabin & Karp. A brute force approach + * is used to find longer strings when a small match has been found. + * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze + * (by Leonid Broukhis). + * A previous version of this file used a more sophisticated algorithm + * (by Fiala and Greene) which is guaranteed to run in linear amortized + * time, but has a larger average cost, uses more memory and is patented. + * However the F&G algorithm may be faster for some highly redundant + * files if the parameter max_chain_length (described below) is too large. + * + * ACKNOWLEDGEMENTS + * + * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and + * I found it in 'freeze' written by Leonid Broukhis. + * Thanks to many people for bug reports and testing. + * + * REFERENCES + * + * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". + * Available in http://www.ietf.org/rfc/rfc1951.txt + * + * A description of the Rabin and Karp algorithm is given in the book + * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. + * + * Fiala,E.R., and Greene,D.H. + * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 + * + */ + +/* @(#) Id */ + +#include "deflate.h" + +const char deflate_copyright[] = + " deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* =========================================================================== + * Function prototypes. + */ +typedef enum { + need_more, /* block not completed, need more input or more output */ + block_done, /* block flush performed */ + finish_started, /* finish started, need only more output at next deflate */ + finish_done /* finish done, accept no more input or output */ +} block_state; + +typedef block_state (*compress_func) OF((deflate_state *s, int flush)); +/* Compression function. Returns the block state after the call. */ + +local void fill_window OF((deflate_state *s)); +local block_state deflate_stored OF((deflate_state *s, int flush)); +local block_state deflate_fast OF((deflate_state *s, int flush)); +#ifndef FASTEST +local block_state deflate_slow OF((deflate_state *s, int flush)); +#endif +local void lm_init OF((deflate_state *s)); +local void putShortMSB OF((deflate_state *s, uInt b)); +local void flush_pending OF((z_streamp strm)); +local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); +#ifndef FASTEST +#ifdef ASMV + void match_init OF((void)); /* asm code initialization */ + uInt longest_match OF((deflate_state *s, IPos cur_match)); +#else +local uInt longest_match OF((deflate_state *s, IPos cur_match)); +#endif +#endif +local uInt longest_match_fast OF((deflate_state *s, IPos cur_match)); + +#ifdef ZLIB_DEBUG +local void check_match OF((deflate_state *s, IPos start, IPos match, + int length)); +#endif + +/* =========================================================================== + * Local data + */ + +#define NIL 0 +/* Tail of hash chains */ + +#ifndef TOO_FAR +# define TOO_FAR 4096 +#endif +/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ + +#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) +/* Minimum amount of lookahead, except at the end of the input file. + * See deflate.c for comments about the MIN_MATCH+1. + */ + +/* Values for max_lazy_match, good_match and max_chain_length, depending on + * the desired pack level (0..9). The values given below have been tuned to + * exclude worst case performance for pathological files. Better values may be + * found for specific files. + */ +typedef struct config_s { + ush good_length; /* reduce lazy search above this match length */ + ush max_lazy; /* do not perform lazy search above this match length */ + ush nice_length; /* quit search above this match length */ + ush max_chain; + compress_func func; +} config; + +#ifdef FASTEST +local const config configuration_table[2] = { +/* good lazy nice chain */ +/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ +/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */ +#else +local const config configuration_table[10] = { +/* good lazy nice chain */ +/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ +/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */ +/* 2 */ {4, 5, 16, 8, deflate_fast}, +/* 3 */ {4, 6, 32, 32, deflate_fast}, + +/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ +/* 5 */ {8, 16, 32, 32, deflate_slow}, +/* 6 */ {8, 16, 128, 128, deflate_slow}, +/* 7 */ {8, 32, 128, 256, deflate_slow}, +/* 8 */ {32, 128, 258, 1024, deflate_slow}, +/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */ +#endif + +/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 + * For deflate_fast() (levels <= 3) good is ignored and lazy has a different + * meaning. + */ + +#define EQUAL 0 +/* result of memcmp for equal strings */ + +#ifndef NO_DUMMY_DECL +struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ +#endif + +/* =========================================================================== + * Update a hash value with the given input byte + * IN assertion: all calls to to UPDATE_HASH are made with consecutive + * input characters, so that a running hash key can be computed from the + * previous key instead of complete recalculation each time. + */ +#define UPDATE_HASH(s,h,c) (h = (((h)<hash_shift) ^ (c)) & s->hash_mask) + + +/* =========================================================================== + * Insert string str in the dictionary and set match_head to the previous head + * of the hash chain (the most recent string with same hash key). Return + * the previous length of the hash chain. + * If this file is compiled with -DFASTEST, the compression level is forced + * to 1, and no hash chains are maintained. + * IN assertion: all calls to to INSERT_STRING are made with consecutive + * input characters and the first MIN_MATCH bytes of str are valid + * (except for the last MIN_MATCH-1 bytes of the input file). + */ +#ifdef FASTEST +#define INSERT_STRING(s, str, match_head) \ + (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ + match_head = s->head[s->ins_h], \ + s->head[s->ins_h] = (Pos)(str)) +#else +#define INSERT_STRING(s, str, match_head) \ + (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ + match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \ + s->head[s->ins_h] = (Pos)(str)) +#endif + +/* =========================================================================== + * Initialize the hash table (avoiding 64K overflow for 16 bit systems). + * prev[] will be initialized on the fly. + */ +#define CLEAR_HASH(s) \ + s->head[s->hash_size-1] = NIL; \ + zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); + +/* ========================================================================= */ +int ZEXPORT deflateInit_(strm, level, version, stream_size) + z_streamp strm; + int level; + const char *version; + int stream_size; +{ + return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, + Z_DEFAULT_STRATEGY, version, stream_size); + /* To do: ignore strm->next_in if we use it as window */ +} + +/* ========================================================================= */ +int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, + version, stream_size) + z_streamp strm; + int level; + int method; + int windowBits; + int memLevel; + int strategy; + const char *version; + int stream_size; +{ + deflate_state *s; + int wrap = 1; + static const char my_version[] = ZLIB_VERSION; + + ushf *overlay; + /* We overlay pending_buf and d_buf+l_buf. This works since the average + * output size for (length,distance) codes is <= 24 bits. + */ + + if (version == Z_NULL || version[0] != my_version[0] || + stream_size != sizeof(z_stream)) { + return Z_VERSION_ERROR; + } + if (strm == Z_NULL) return Z_STREAM_ERROR; + + strm->msg = Z_NULL; + if (strm->zalloc == (alloc_func)0) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; + } + if (strm->zfree == (free_func)0) strm->zfree = zcfree; + +#ifdef FASTEST + if (level != 0) level = 1; +#else + if (level == Z_DEFAULT_COMPRESSION) level = 6; +#endif + + if (windowBits < 0) { /* suppress zlib wrapper */ + wrap = 0; + windowBits = -windowBits; + } +#ifdef GZIP + else if (windowBits > 15) { + wrap = 2; /* write gzip wrapper instead */ + windowBits -= 16; + } +#endif + if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || + windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || + strategy < 0 || strategy > Z_FIXED) { + return Z_STREAM_ERROR; + } + if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ + s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); + if (s == Z_NULL) return Z_MEM_ERROR; + strm->state = (struct internal_state FAR *)s; + s->strm = strm; + + s->wrap = wrap; + s->gzhead = Z_NULL; + s->w_bits = windowBits; + s->w_size = 1 << s->w_bits; + s->w_mask = s->w_size - 1; + + s->hash_bits = memLevel + 7; + s->hash_size = 1 << s->hash_bits; + s->hash_mask = s->hash_size - 1; + s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); + + s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); + s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); + s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); + + s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ + + overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); + s->pending_buf = (uchf *) overlay; + s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); + + if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || + s->pending_buf == Z_NULL) { + s->status = FINISH_STATE; + strm->msg = __UNCONST(ERR_MSG(Z_MEM_ERROR)); + deflateEnd (strm); + return Z_MEM_ERROR; + } + s->d_buf = overlay + s->lit_bufsize/sizeof(ush); + s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; + + s->level = level; + s->strategy = strategy; + s->method = (Byte)method; + + return deflateReset(strm); +} + +/* ========================================================================= */ +int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) + z_streamp strm; + const Bytef *dictionary; + uInt dictLength; +{ + deflate_state *s; + uInt length = dictLength; + uInt n; + IPos hash_head = 0; + + if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL || + strm->state->wrap == 2 || + (strm->state->wrap == 1 && strm->state->status != INIT_STATE)) + return Z_STREAM_ERROR; + + s = strm->state; + if (s->wrap) + strm->adler = adler32(strm->adler, dictionary, dictLength); + + if (length < MIN_MATCH) return Z_OK; + if (length > MAX_DIST(s)) { + length = MAX_DIST(s); + dictionary += dictLength - length; /* use the tail of the dictionary */ + } + zmemcpy(s->window, dictionary, length); + s->strstart = length; + s->block_start = (long)length; + + /* Insert all strings in the hash table (except for the last two bytes). + * s->lookahead stays null, so s->ins_h will be recomputed at the next + * call of fill_window. + */ + s->ins_h = s->window[0]; + UPDATE_HASH(s, s->ins_h, s->window[1]); + for (n = 0; n <= length - MIN_MATCH; n++) { + INSERT_STRING(s, n, hash_head); + } + if (hash_head) hash_head = 0; /* to make compiler happy */ + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateReset (strm) + z_streamp strm; +{ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL || + strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) { + return Z_STREAM_ERROR; + } + + strm->total_in = strm->total_out = 0; + strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ + strm->data_type = Z_UNKNOWN; + + s = (deflate_state *)strm->state; + s->pending = 0; + s->pending_out = s->pending_buf; + + if (s->wrap < 0) { + s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */ + } + s->status = s->wrap ? INIT_STATE : BUSY_STATE; + strm->adler = +#ifdef GZIP + s->wrap == 2 ? crc32(0L, Z_NULL, 0) : +#endif + adler32(0L, Z_NULL, 0); + s->last_flush = Z_NO_FLUSH; + + _tr_init(s); + lm_init(s); + + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateSetHeader (strm, head) + z_streamp strm; + gz_headerp head; +{ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + if (strm->state->wrap != 2) return Z_STREAM_ERROR; + strm->state->gzhead = head; + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflatePrime (strm, bits, value) + z_streamp strm; + int bits; + int value; +{ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + strm->state->bi_valid = bits; + strm->state->bi_buf = (ush)(value & ((1 << bits) - 1)); + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateParams(strm, level, strategy) + z_streamp strm; + int level; + int strategy; +{ + deflate_state *s; + compress_func func; + int err = Z_OK; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + s = strm->state; + +#ifdef FASTEST + if (level != 0) level = 1; +#else + if (level == Z_DEFAULT_COMPRESSION) level = 6; +#endif + if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { + return Z_STREAM_ERROR; + } + func = configuration_table[s->level].func; + + if (func != configuration_table[level].func && strm->total_in != 0) { + /* Flush the last buffer: */ + err = deflate(strm, Z_PARTIAL_FLUSH); + } + if (s->level != level) { + s->level = level; + s->max_lazy_match = configuration_table[level].max_lazy; + s->good_match = configuration_table[level].good_length; + s->nice_match = configuration_table[level].nice_length; + s->max_chain_length = configuration_table[level].max_chain; + } + s->strategy = strategy; + return err; +} + +/* ========================================================================= */ +int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) + z_streamp strm; + int good_length; + int max_lazy; + int nice_length; + int max_chain; +{ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + s = strm->state; + s->good_match = good_length; + s->max_lazy_match = max_lazy; + s->nice_match = nice_length; + s->max_chain_length = max_chain; + return Z_OK; +} + +/* ========================================================================= + * For the default windowBits of 15 and memLevel of 8, this function returns + * a close to exact, as well as small, upper bound on the compressed size. + * They are coded as constants here for a reason--if the #define's are + * changed, then this function needs to be changed as well. The return + * value for 15 and 8 only works for those exact settings. + * + * For any setting other than those defaults for windowBits and memLevel, + * the value returned is a conservative worst case for the maximum expansion + * resulting from using fixed blocks instead of stored blocks, which deflate + * can emit on compressed data for some combinations of the parameters. + * + * This function could be more sophisticated to provide closer upper bounds + * for every combination of windowBits and memLevel, as well as wrap. + * But even the conservative upper bound of about 14% expansion does not + * seem onerous for output buffer allocation. + */ +uLong ZEXPORT deflateBound(strm, sourceLen) + z_streamp strm; + uLong sourceLen; +{ + deflate_state *s; + uLong destLen; + + /* conservative upper bound */ + destLen = sourceLen + + ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 11; + + /* if can't get parameters, return conservative bound */ + if (strm == Z_NULL || strm->state == Z_NULL) + return destLen; + + /* if not default parameters, return conservative bound */ + s = strm->state; + if (s->w_bits != 15 || s->hash_bits != 8 + 7) + return destLen; + + /* default settings: return tight bound for that case */ + return compressBound(sourceLen); +} + +/* ========================================================================= + * Put a short in the pending buffer. The 16-bit value is put in MSB order. + * IN assertion: the stream state is correct and there is enough room in + * pending_buf. + */ +local void putShortMSB (s, b) + deflate_state *s; + uInt b; +{ + put_byte(s, (Byte)(b >> 8)); + put_byte(s, (Byte)(b & 0xff)); +} + +/* ========================================================================= + * Flush as much pending output as possible. All deflate() output goes + * through this function so some applications may wish to modify it + * to avoid allocating a large strm->next_out buffer and copying into it. + * (See also read_buf()). + */ +local void flush_pending(strm) + z_streamp strm; +{ + unsigned len = strm->state->pending; + + if (len > strm->avail_out) len = strm->avail_out; + if (len == 0) return; + + zmemcpy(strm->next_out, strm->state->pending_out, len); + strm->next_out += len; + strm->state->pending_out += len; + strm->total_out += len; + strm->avail_out -= len; + strm->state->pending -= len; + if (strm->state->pending == 0) { + strm->state->pending_out = strm->state->pending_buf; + } +} + +/* ========================================================================= */ +int ZEXPORT deflate (strm, flush) + z_streamp strm; + int flush; +{ + int old_flush; /* value of flush param for previous deflate call */ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL || + flush > Z_FINISH || flush < 0) { + return Z_STREAM_ERROR; + } + s = strm->state; + + if (strm->next_out == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0) || + (s->status == FINISH_STATE && flush != Z_FINISH)) { + ERR_RETURN(strm, Z_STREAM_ERROR); + } + if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); + + s->strm = strm; /* just in case */ + old_flush = s->last_flush; + s->last_flush = flush; + + /* Write the header */ + if (s->status == INIT_STATE) { +#ifdef GZIP + if (s->wrap == 2) { + strm->adler = crc32(0L, Z_NULL, 0); + put_byte(s, 31); + put_byte(s, 139); + put_byte(s, 8); + if (s->gzhead == NULL) { + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, s->level == 9 ? 2 : + (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? + 4 : 0)); + put_byte(s, OS_CODE); + s->status = BUSY_STATE; + } + else { + put_byte(s, (s->gzhead->text ? 1 : 0) + + (s->gzhead->hcrc ? 2 : 0) + + (s->gzhead->extra == Z_NULL ? 0 : 4) + + (s->gzhead->name == Z_NULL ? 0 : 8) + + (s->gzhead->comment == Z_NULL ? 0 : 16) + ); + put_byte(s, (Byte)(s->gzhead->time & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); + put_byte(s, s->level == 9 ? 2 : + (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? + 4 : 0)); + put_byte(s, s->gzhead->os & 0xff); + if (s->gzhead->extra != NULL) { + put_byte(s, s->gzhead->extra_len & 0xff); + put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); + } + if (s->gzhead->hcrc) + strm->adler = crc32(strm->adler, s->pending_buf, + s->pending); + s->gzindex = 0; + s->status = EXTRA_STATE; + } + } + else +#endif + { + uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; + uInt level_flags; + + if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2) + level_flags = 0; + else if (s->level < 6) + level_flags = 1; + else if (s->level == 6) + level_flags = 2; + else + level_flags = 3; + header |= (level_flags << 6); + if (s->strstart != 0) header |= PRESET_DICT; + header += 31 - (header % 31); + + s->status = BUSY_STATE; + putShortMSB(s, header); + + /* Save the adler32 of the preset dictionary: */ + if (s->strstart != 0) { + putShortMSB(s, (uInt)(strm->adler >> 16)); + putShortMSB(s, (uInt)(strm->adler & 0xffff)); + } + strm->adler = adler32(0L, Z_NULL, 0); + } + } +#ifdef GZIP + if (s->status == EXTRA_STATE) { + if (s->gzhead->extra != NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + + while (s->gzindex < (s->gzhead->extra_len & 0xffff)) { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) + break; + } + put_byte(s, s->gzhead->extra[s->gzindex]); + s->gzindex++; + } + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (s->gzindex == s->gzhead->extra_len) { + s->gzindex = 0; + s->status = NAME_STATE; + } + } + else + s->status = NAME_STATE; + } + if (s->status == NAME_STATE) { + if (s->gzhead->name != NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + int val; + + do { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) { + val = 1; + break; + } + } + val = s->gzhead->name[s->gzindex++]; + put_byte(s, val); + } while (val != 0); + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (val == 0) { + s->gzindex = 0; + s->status = COMMENT_STATE; + } + } + else + s->status = COMMENT_STATE; + } + if (s->status == COMMENT_STATE) { + if (s->gzhead->comment != NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + int val; + + do { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) { + val = 1; + break; + } + } + val = s->gzhead->comment[s->gzindex++]; + put_byte(s, val); + } while (val != 0); + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (val == 0) + s->status = HCRC_STATE; + } + else + s->status = HCRC_STATE; + } + if (s->status == HCRC_STATE) { + if (s->gzhead->hcrc) { + if (s->pending + 2 > s->pending_buf_size) + flush_pending(strm); + if (s->pending + 2 <= s->pending_buf_size) { + put_byte(s, (Byte)(strm->adler & 0xff)); + put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); + strm->adler = crc32(0L, Z_NULL, 0); + s->status = BUSY_STATE; + } + } + else + s->status = BUSY_STATE; + } +#endif + + /* Flush as much pending output as possible */ + if (s->pending != 0) { + flush_pending(strm); + if (strm->avail_out == 0) { + /* Since avail_out is 0, deflate will be called again with + * more output space, but possibly with both pending and + * avail_in equal to zero. There won't be anything to do, + * but this is not an error situation so make sure we + * return OK instead of BUF_ERROR at next call of deflate: + */ + s->last_flush = -1; + return Z_OK; + } + + /* Make sure there is something to do and avoid duplicate consecutive + * flushes. For repeated and useless calls with Z_FINISH, we keep + * returning Z_STREAM_END instead of Z_BUF_ERROR. + */ + } else if (strm->avail_in == 0 && flush <= old_flush && + flush != Z_FINISH) { + ERR_RETURN(strm, Z_BUF_ERROR); + } + + /* User must not provide more input after the first FINISH: */ + if (s->status == FINISH_STATE && strm->avail_in != 0) { + ERR_RETURN(strm, Z_BUF_ERROR); + } + + /* Start a new block or continue the current one. + */ + if (strm->avail_in != 0 || s->lookahead != 0 || + (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { + block_state bstate; + + bstate = (*(configuration_table[s->level].func))(s, flush); + + if (bstate == finish_started || bstate == finish_done) { + s->status = FINISH_STATE; + } + if (bstate == need_more || bstate == finish_started) { + if (strm->avail_out == 0) { + s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ + } + return Z_OK; + /* If flush != Z_NO_FLUSH && avail_out == 0, the next call + * of deflate should use the same flush parameter to make sure + * that the flush is complete. So we don't have to output an + * empty block here, this will be done at next call. This also + * ensures that for a very small output buffer, we emit at most + * one empty block. + */ + } + if (bstate == block_done) { + if (flush == Z_PARTIAL_FLUSH) { + _tr_align(s); + } else { /* FULL_FLUSH or SYNC_FLUSH */ + _tr_stored_block(s, (char*)0, 0L, 0); + /* For a full flush, this empty block will be recognized + * as a special marker by inflate_sync(). + */ + if (flush == Z_FULL_FLUSH) { + CLEAR_HASH(s); /* forget history */ + } + } + flush_pending(strm); + if (strm->avail_out == 0) { + s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ + return Z_OK; + } + } + } + Assert(strm->avail_out > 0, "bug2"); + + if (flush != Z_FINISH) return Z_OK; + if (s->wrap <= 0) return Z_STREAM_END; + + /* Write the trailer */ +#ifdef GZIP + if (s->wrap == 2) { + put_byte(s, (Byte)(strm->adler & 0xff)); + put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); + put_byte(s, (Byte)((strm->adler >> 16) & 0xff)); + put_byte(s, (Byte)((strm->adler >> 24) & 0xff)); + put_byte(s, (Byte)(strm->total_in & 0xff)); + put_byte(s, (Byte)((strm->total_in >> 8) & 0xff)); + put_byte(s, (Byte)((strm->total_in >> 16) & 0xff)); + put_byte(s, (Byte)((strm->total_in >> 24) & 0xff)); + } + else +#endif + { + putShortMSB(s, (uInt)(strm->adler >> 16)); + putShortMSB(s, (uInt)(strm->adler & 0xffff)); + } + flush_pending(strm); + /* If avail_out is zero, the application will call deflate again + * to flush the rest. + */ + if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */ + return s->pending != 0 ? Z_OK : Z_STREAM_END; +} + +/* ========================================================================= */ +int ZEXPORT deflateEnd (strm) + z_streamp strm; +{ + int status; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + + status = strm->state->status; + if (status != INIT_STATE && + status != EXTRA_STATE && + status != NAME_STATE && + status != COMMENT_STATE && + status != HCRC_STATE && + status != BUSY_STATE && + status != FINISH_STATE) { + return Z_STREAM_ERROR; + } + + /* Deallocate in reverse order of allocations: */ + TRY_FREE(strm, strm->state->pending_buf); + TRY_FREE(strm, strm->state->head); + TRY_FREE(strm, strm->state->prev); + TRY_FREE(strm, strm->state->window); + + ZFREE(strm, strm->state); + strm->state = Z_NULL; + + return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; +} + +/* ========================================================================= + * Copy the source state to the destination state. + * To simplify the source, this is not supported for 16-bit MSDOS (which + * doesn't have enough memory anyway to duplicate compression states). + */ +int ZEXPORT deflateCopy (dest, source) + z_streamp dest; + z_streamp source; +{ +#ifdef MAXSEG_64K + return Z_STREAM_ERROR; +#else + deflate_state *ds; + deflate_state *ss; + ushf *overlay; + + + if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { + return Z_STREAM_ERROR; + } + + ss = source->state; + + zmemcpy(dest, source, sizeof(z_stream)); + + ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); + if (ds == Z_NULL) return Z_MEM_ERROR; + dest->state = (struct internal_state FAR *) ds; + zmemcpy(ds, ss, sizeof(deflate_state)); + ds->strm = dest; + + ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); + ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); + ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); + overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); + ds->pending_buf = (uchf *) overlay; + + if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || + ds->pending_buf == Z_NULL) { + deflateEnd (dest); + return Z_MEM_ERROR; + } + /* following zmemcpy do not work for 16-bit MSDOS */ + zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); + zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos)); + zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos)); + zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); + + ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); + ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); + ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; + + ds->l_desc.dyn_tree = ds->dyn_ltree; + ds->d_desc.dyn_tree = ds->dyn_dtree; + ds->bl_desc.dyn_tree = ds->bl_tree; + + return Z_OK; +#endif /* MAXSEG_64K */ +} + +/* =========================================================================== + * Read a new buffer from the current input stream, update the adler32 + * and total number of bytes read. All deflate() input goes through + * this function so some applications may wish to modify it to avoid + * allocating a large strm->next_in buffer and copying from it. + * (See also flush_pending()). + */ +local int read_buf(strm, buf, size) + z_streamp strm; + Bytef *buf; + unsigned size; +{ + unsigned len = strm->avail_in; + + if (len > size) len = size; + if (len == 0) return 0; + + strm->avail_in -= len; + + if (strm->state->wrap == 1) { + strm->adler = adler32(strm->adler, strm->next_in, len); + } +#ifdef GZIP + else if (strm->state->wrap == 2) { + strm->adler = crc32(strm->adler, strm->next_in, len); + } +#endif + zmemcpy(buf, strm->next_in, len); + strm->next_in += len; + strm->total_in += len; + + return (int)len; +} + +/* =========================================================================== + * Initialize the "longest match" routines for a new zlib stream + */ +local void lm_init (s) + deflate_state *s; +{ + s->window_size = (ulg)2L*s->w_size; + + CLEAR_HASH(s); + + /* Set the default configuration parameters: + */ + s->max_lazy_match = configuration_table[s->level].max_lazy; + s->good_match = configuration_table[s->level].good_length; + s->nice_match = configuration_table[s->level].nice_length; + s->max_chain_length = configuration_table[s->level].max_chain; + + s->strstart = 0; + s->block_start = 0L; + s->lookahead = 0; + s->match_length = s->prev_length = MIN_MATCH-1; + s->match_available = 0; + s->ins_h = 0; +#ifndef FASTEST +#ifdef ASMV + match_init(); /* initialize the asm code */ +#endif +#endif +} + +#ifndef FASTEST +/* =========================================================================== + * Set match_start to the longest match starting at the given string and + * return its length. Matches shorter or equal to prev_length are discarded, + * in which case the result is equal to prev_length and match_start is + * garbage. + * IN assertions: cur_match is the head of the hash chain for the current + * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 + * OUT assertion: the match length is not greater than s->lookahead. + */ +#ifndef ASMV +/* For 80x86 and 680x0, an optimized version will be provided in match.asm or + * match.S. The code will be functionally equivalent. + */ +local uInt longest_match(s, cur_match) + deflate_state *s; + IPos cur_match; /* current match */ +{ + unsigned chain_length = s->max_chain_length;/* max hash chain length */ + register Bytef *scan = s->window + s->strstart; /* current string */ + register Bytef *match; /* matched string */ + register int len; /* length of current match */ + int best_len = s->prev_length; /* best match length so far */ + int nice_match = s->nice_match; /* stop if match long enough */ + IPos limit = s->strstart > (IPos)MAX_DIST(s) ? + s->strstart - (IPos)MAX_DIST(s) : NIL; + /* Stop when cur_match becomes <= limit. To simplify the code, + * we prevent matches with the string of window index 0. + */ + Posf *prev = s->prev; + uInt wmask = s->w_mask; + +#ifdef UNALIGNED_OK + /* Compare two bytes at a time. Note: this is not always beneficial. + * Try with and without -DUNALIGNED_OK to check. + */ + register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; + register ush scan_start = *(ushf*)scan; + register ush scan_end = *(ushf*)(scan+best_len-1); +#else + register Bytef *strend = s->window + s->strstart + MAX_MATCH; + register Byte scan_end1 = scan[best_len-1]; + register Byte scan_end = scan[best_len]; +#endif + + /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. + * It is easy to get rid of this optimization if necessary. + */ + Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); + + /* Do not waste too much time if we already have a good match: */ + if (s->prev_length >= s->good_match) { + chain_length >>= 2; + } + /* Do not look for matches beyond the end of the input. This is necessary + * to make deflate deterministic. + */ + if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + + Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); + + do { + Assert(cur_match < s->strstart, "no future"); + match = s->window + cur_match; + + /* Skip to next match if the match length cannot increase + * or if the match length is less than 2. Note that the checks below + * for insufficient lookahead only occur occasionally for performance + * reasons. Therefore uninitialized memory will be accessed, and + * conditional jumps will be made that depend on those values. + * However the length of the match is limited to the lookahead, so + * the output of deflate is not affected by the uninitialized values. + */ +#if (defined(UNALIGNED_OK) && MAX_MATCH == 258) + /* This code assumes sizeof(unsigned short) == 2. Do not use + * UNALIGNED_OK if your compiler uses a different size. + */ + if (*(ushf*)(match+best_len-1) != scan_end || + *(ushf*)match != scan_start) continue; + + /* It is not necessary to compare scan[2] and match[2] since they are + * always equal when the other bytes match, given that the hash keys + * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at + * strstart+3, +5, ... up to strstart+257. We check for insufficient + * lookahead only every 4th comparison; the 128th check will be made + * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is + * necessary to put more guard bytes at the end of the window, or + * to check more often for insufficient lookahead. + */ + Assert(scan[2] == match[2], "scan[2]?"); + scan++, match++; + do { + } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + scan < strend); + /* The funny "do {}" generates better code on most compilers */ + + /* Here, scan <= window+strstart+257 */ + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + if (*scan == *match) scan++; + + len = (MAX_MATCH - 1) - (int)(strend-scan); + scan = strend - (MAX_MATCH-1); + +#else /* UNALIGNED_OK */ + + if (match[best_len] != scan_end || + match[best_len-1] != scan_end1 || + *match != *scan || + *++match != scan[1]) continue; + + /* The check at best_len-1 can be removed because it will be made + * again later. (This heuristic is not always a win.) + * It is not necessary to compare scan[2] and match[2] since they + * are always equal when the other bytes match, given that + * the hash keys are equal and that HASH_BITS >= 8. + */ + scan += 2, match++; + Assert(*scan == *match, "match[2]?"); + + /* We check for insufficient lookahead only every 8th comparison; + * the 256th check will be made at strstart+258. + */ + do { + } while (*++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + scan < strend); + + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + + len = MAX_MATCH - (int)(strend - scan); + scan = strend - MAX_MATCH; + +#endif /* UNALIGNED_OK */ + + if (len > best_len) { + s->match_start = cur_match; + best_len = len; + if (len >= nice_match) break; +#ifdef UNALIGNED_OK + scan_end = *(ushf*)(scan+best_len-1); +#else + scan_end1 = scan[best_len-1]; + scan_end = scan[best_len]; +#endif + } + } while ((cur_match = prev[cur_match & wmask]) > limit + && --chain_length != 0); + + if ((uInt)best_len <= s->lookahead) return (uInt)best_len; + return s->lookahead; +} +#endif /* ASMV */ +#endif /* FASTEST */ + +/* --------------------------------------------------------------------------- + * Optimized version for level == 1 or strategy == Z_RLE only + */ +local uInt longest_match_fast(s, cur_match) + deflate_state *s; + IPos cur_match; /* current match */ +{ + register Bytef *scan = s->window + s->strstart; /* current string */ + register Bytef *match; /* matched string */ + register int len; /* length of current match */ + register Bytef *strend = s->window + s->strstart + MAX_MATCH; + + /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. + * It is easy to get rid of this optimization if necessary. + */ + Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); + + Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); + + Assert(cur_match < s->strstart, "no future"); + + match = s->window + cur_match; + + /* Return failure if the match length is less than 2: + */ + if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; + + /* The check at best_len-1 can be removed because it will be made + * again later. (This heuristic is not always a win.) + * It is not necessary to compare scan[2] and match[2] since they + * are always equal when the other bytes match, given that + * the hash keys are equal and that HASH_BITS >= 8. + */ + scan += 2, match += 2; + Assert(*scan == *match, "match[2]?"); + + /* We check for insufficient lookahead only every 8th comparison; + * the 256th check will be made at strstart+258. + */ + do { + } while (*++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + scan < strend); + + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + + len = MAX_MATCH - (int)(strend - scan); + + if (len < MIN_MATCH) return MIN_MATCH - 1; + + s->match_start = cur_match; + return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead; +} + +#ifdef ZLIB_DEBUG +/* =========================================================================== + * Check that the match at match_start is indeed a match. + */ +local void check_match(s, start, match, length) + deflate_state *s; + IPos start, match; + int length; +{ + /* check that the match is indeed a match */ + if (zmemcmp(s->window + match, + s->window + start, length) != EQUAL) { + fprintf(stderr, " start %u, match %u, length %d\n", + start, match, length); + do { + fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); + } while (--length != 0); + z_error("invalid match"); + } + if (z_verbose > 1) { + fprintf(stderr,"\\[%d,%d]", start-match, length); + do { putc(s->window[start++], stderr); } while (--length != 0); + } +} +#else +# define check_match(s, start, match, length) +#endif /* ZLIB_DEBUG */ + +/* =========================================================================== + * Fill the window when the lookahead becomes insufficient. + * Updates strstart and lookahead. + * + * IN assertion: lookahead < MIN_LOOKAHEAD + * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD + * At least one byte has been read, or avail_in == 0; reads are + * performed for at least two bytes (required for the zip translate_eol + * option -- not supported here). + */ +local void fill_window(s) + deflate_state *s; +{ + register unsigned n, m; + register Posf *p; + unsigned more; /* Amount of free space at the end of the window. */ + uInt wsize = s->w_size; + + do { + more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); + + /* Deal with !@#$% 64K limit: */ + if (sizeof(int) <= 2) { + if (more == 0 && s->strstart == 0 && s->lookahead == 0) { + more = wsize; + + } else if (more == (unsigned)(-1)) { + /* Very unlikely, but possible on 16 bit machine if + * strstart == 0 && lookahead == 1 (input done a byte at time) + */ + more--; + } + } + + /* If the window is almost full and there is insufficient lookahead, + * move the upper half to the lower one to make room in the upper half. + */ + if (s->strstart >= wsize+MAX_DIST(s)) { + + zmemcpy(s->window, s->window+wsize, (unsigned)wsize); + s->match_start -= wsize; + s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ + s->block_start -= (long) wsize; + + /* Slide the hash table (could be avoided with 32 bit values + at the expense of memory usage). We slide even when level == 0 + to keep the hash table consistent if we switch back to level > 0 + later. (Using level 0 permanently is not an optimal usage of + zlib, so we don't care about this pathological case.) + */ + /* %%% avoid this when Z_RLE */ + n = s->hash_size; + p = &s->head[n]; + do { + m = *--p; + *p = (Pos)(m >= wsize ? m-wsize : NIL); + } while (--n); + + n = wsize; +#ifndef FASTEST + p = &s->prev[n]; + do { + m = *--p; + *p = (Pos)(m >= wsize ? m-wsize : NIL); + /* If n is not on any hash chain, prev[n] is garbage but + * its value will never be used. + */ + } while (--n); +#endif + more += wsize; + } + if (s->strm->avail_in == 0) return; + + /* If there was no sliding: + * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && + * more == window_size - lookahead - strstart + * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) + * => more >= window_size - 2*WSIZE + 2 + * In the BIG_MEM or MMAP case (not yet supported), + * window_size == input_size + MIN_LOOKAHEAD && + * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. + * Otherwise, window_size == 2*WSIZE so more >= 2. + * If there was sliding, more >= WSIZE. So in all cases, more >= 2. + */ + Assert(more >= 2, "more < 2"); + + n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); + s->lookahead += n; + + /* Initialize the hash value now that we have some input: */ + if (s->lookahead >= MIN_MATCH) { + s->ins_h = s->window[s->strstart]; + UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); +#if MIN_MATCH != 3 + Call UPDATE_HASH() MIN_MATCH-3 more times +#endif + } + /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, + * but this is not important since only literal bytes will be emitted. + */ + + } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); +} + +/* =========================================================================== + * Flush the current block, with given end-of-file flag. + * IN assertion: strstart is set to the end of the current match. + */ +#define FLUSH_BLOCK_ONLY(s, eof) { \ + _tr_flush_block(s, (s->block_start >= 0L ? \ + (charf *)&s->window[(unsigned)s->block_start] : \ + (charf *)Z_NULL), \ + (ulg)((long)s->strstart - s->block_start), \ + (eof)); \ + s->block_start = s->strstart; \ + flush_pending(s->strm); \ + Tracev((stderr,"[FLUSH]")); \ +} + +/* Same but force premature exit if necessary. */ +#define FLUSH_BLOCK(s, eof) { \ + FLUSH_BLOCK_ONLY(s, eof); \ + if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \ +} + +/* =========================================================================== + * Copy without compression as much as possible from the input stream, return + * the current block state. + * This function does not insert new strings in the dictionary since + * uncompressible data is probably not useful. This function is used + * only for the level=0 compression option. + * NOTE: this function should be optimized to avoid extra copying from + * window to pending_buf. + */ +local block_state deflate_stored(s, flush) + deflate_state *s; + int flush; +{ + /* Stored blocks are limited to 0xffff bytes, pending_buf is limited + * to pending_buf_size, and each stored block has a 5 byte header: + */ + ulg max_block_size = 0xffff; + ulg max_start; + + if (max_block_size > s->pending_buf_size - 5) { + max_block_size = s->pending_buf_size - 5; + } + + /* Copy as much as possible from input to output: */ + for (;;) { + /* Fill the window as much as possible: */ + if (s->lookahead <= 1) { + + Assert(s->strstart < s->w_size+MAX_DIST(s) || + s->block_start >= (long)s->w_size, "slide too late"); + + fill_window(s); + if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; + + if (s->lookahead == 0) break; /* flush the current block */ + } + Assert(s->block_start >= 0L, "block gone"); + + s->strstart += s->lookahead; + s->lookahead = 0; + + /* Emit a stored block if pending_buf will be full: */ + max_start = s->block_start + max_block_size; + if (s->strstart == 0 || (ulg)s->strstart >= max_start) { + /* strstart == 0 is possible when wraparound on 16-bit machine */ + s->lookahead = (uInt)(s->strstart - max_start); + s->strstart = (uInt)max_start; + FLUSH_BLOCK(s, 0); + } + /* Flush if we may have to slide, otherwise block_start may become + * negative and the data will be gone: + */ + if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { + FLUSH_BLOCK(s, 0); + } + } + FLUSH_BLOCK(s, flush == Z_FINISH); + return flush == Z_FINISH ? finish_done : block_done; +} + +/* =========================================================================== + * Compress as much as possible from the input stream, return the current + * block state. + * This function does not perform lazy evaluation of matches and inserts + * new strings in the dictionary only for unmatched strings or for short + * matches. It is used only for the fast compression options. + */ +local block_state deflate_fast(s, flush) + deflate_state *s; + int flush; +{ + IPos hash_head = NIL; /* head of the hash chain */ + int bflush; /* set if current block must be flushed */ + + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the next match, plus MIN_MATCH bytes to insert the + * string following the next match. + */ + if (s->lookahead < MIN_LOOKAHEAD) { + fill_window(s); + if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* Insert the string window[strstart .. strstart+2] in the + * dictionary, and set hash_head to the head of the hash chain: + */ + if (s->lookahead >= MIN_MATCH) { + INSERT_STRING(s, s->strstart, hash_head); + } + + /* Find the longest match, discarding those <= prev_length. + * At this point we have always match_length < MIN_MATCH + */ + if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { + /* To simplify the code, we prevent matches with the string + * of window index 0 (in particular we have to avoid a match + * of the string with itself at the start of the input file). + */ +#ifdef FASTEST + if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) || + (s->strategy == Z_RLE && s->strstart - hash_head == 1)) { + s->match_length = longest_match_fast (s, hash_head); + } +#else + if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { + s->match_length = longest_match (s, hash_head); + } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { + s->match_length = longest_match_fast (s, hash_head); + } +#endif + /* longest_match() or longest_match_fast() sets match_start */ + } + if (s->match_length >= MIN_MATCH) { + check_match(s, s->strstart, s->match_start, s->match_length); + + _tr_tally_dist(s, s->strstart - s->match_start, + s->match_length - MIN_MATCH, bflush); + + s->lookahead -= s->match_length; + + /* Insert new strings in the hash table only if the match length + * is not too large. This saves time but degrades compression. + */ +#ifndef FASTEST + if (s->match_length <= s->max_insert_length && + s->lookahead >= MIN_MATCH) { + s->match_length--; /* string at strstart already in table */ + do { + s->strstart++; + INSERT_STRING(s, s->strstart, hash_head); + /* strstart never exceeds WSIZE-MAX_MATCH, so there are + * always MIN_MATCH bytes ahead. + */ + } while (--s->match_length != 0); + s->strstart++; + } else +#endif + { + s->strstart += s->match_length; + s->match_length = 0; + s->ins_h = s->window[s->strstart]; + UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); +#if MIN_MATCH != 3 + Call UPDATE_HASH() MIN_MATCH-3 more times +#endif + /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not + * matter since it will be recomputed at next deflate call. + */ + } + } else { + /* No match, output a literal byte */ + Tracevv((stderr,"%c", s->window[s->strstart])); + _tr_tally_lit (s, s->window[s->strstart], bflush); + s->lookahead--; + s->strstart++; + } + if (bflush) FLUSH_BLOCK(s, 0); + } + FLUSH_BLOCK(s, flush == Z_FINISH); + return flush == Z_FINISH ? finish_done : block_done; +} + +#ifndef FASTEST +/* =========================================================================== + * Same as above, but achieves better compression. We use a lazy + * evaluation for matches: a match is finally adopted only if there is + * no better match at the next window position. + */ +local block_state deflate_slow(s, flush) + deflate_state *s; + int flush; +{ + IPos hash_head = NIL; /* head of hash chain */ + int bflush; /* set if current block must be flushed */ + + /* Process the input block. */ + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the next match, plus MIN_MATCH bytes to insert the + * string following the next match. + */ + if (s->lookahead < MIN_LOOKAHEAD) { + fill_window(s); + if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* Insert the string window[strstart .. strstart+2] in the + * dictionary, and set hash_head to the head of the hash chain: + */ + if (s->lookahead >= MIN_MATCH) { + INSERT_STRING(s, s->strstart, hash_head); + } + + /* Find the longest match, discarding those <= prev_length. + */ + s->prev_length = s->match_length, s->prev_match = s->match_start; + s->match_length = MIN_MATCH-1; + + if (hash_head != NIL && s->prev_length < s->max_lazy_match && + s->strstart - hash_head <= MAX_DIST(s)) { + /* To simplify the code, we prevent matches with the string + * of window index 0 (in particular we have to avoid a match + * of the string with itself at the start of the input file). + */ + if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { + s->match_length = longest_match (s, hash_head); + } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { + s->match_length = longest_match_fast (s, hash_head); + } + /* longest_match() or longest_match_fast() sets match_start */ + + if (s->match_length <= 5 && (s->strategy == Z_FILTERED +#if TOO_FAR <= 32767 + || (s->match_length == MIN_MATCH && + s->strstart - s->match_start > TOO_FAR) +#endif + )) { + + /* If prev_match is also MIN_MATCH, match_start is garbage + * but we will ignore the current match anyway. + */ + s->match_length = MIN_MATCH-1; + } + } + /* If there was a match at the previous step and the current + * match is not better, output the previous match: + */ + if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { + uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; + /* Do not insert strings in hash table beyond this. */ + + check_match(s, s->strstart-1, s->prev_match, s->prev_length); + + _tr_tally_dist(s, s->strstart -1 - s->prev_match, + s->prev_length - MIN_MATCH, bflush); + + /* Insert in hash table all strings up to the end of the match. + * strstart-1 and strstart are already inserted. If there is not + * enough lookahead, the last two strings are not inserted in + * the hash table. + */ + s->lookahead -= s->prev_length-1; + s->prev_length -= 2; + do { + if (++s->strstart <= max_insert) { + INSERT_STRING(s, s->strstart, hash_head); + } + } while (--s->prev_length != 0); + s->match_available = 0; + s->match_length = MIN_MATCH-1; + s->strstart++; + + if (bflush) FLUSH_BLOCK(s, 0); + + } else if (s->match_available) { + /* If there was no match at the previous position, output a + * single literal. If there was a match but the current match + * is longer, truncate the previous match to a single literal. + */ + Tracevv((stderr,"%c", s->window[s->strstart-1])); + _tr_tally_lit(s, s->window[s->strstart-1], bflush); + if (bflush) { + FLUSH_BLOCK_ONLY(s, 0); + } + s->strstart++; + s->lookahead--; + if (s->strm->avail_out == 0) return need_more; + } else { + /* There is no previous match to compare with, wait for + * the next step to decide. + */ + s->match_available = 1; + s->strstart++; + s->lookahead--; + } + } + Assert (flush != Z_NO_FLUSH, "no flush?"); + if (s->match_available) { + Tracevv((stderr,"%c", s->window[s->strstart-1])); + _tr_tally_lit(s, s->window[s->strstart-1], bflush); + s->match_available = 0; + } + FLUSH_BLOCK(s, flush == Z_FINISH); + return flush == Z_FINISH ? finish_done : block_done; +} +#endif /* FASTEST */ + +#if 0 +/* =========================================================================== + * For Z_RLE, simply look for runs of bytes, generate matches only of distance + * one. Do not maintain a hash table. (It will be regenerated if this run of + * deflate switches away from Z_RLE.) + */ +local block_state deflate_rle(s, flush) + deflate_state *s; + int flush; +{ + int bflush; /* set if current block must be flushed */ + uInt run; /* length of run */ + uInt max; /* maximum length of run */ + uInt prev; /* byte at distance one to match */ + Bytef *scan; /* scan for end of run */ + + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the longest encodable run. + */ + if (s->lookahead < MAX_MATCH) { + fill_window(s); + if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* See how many times the previous byte repeats */ + run = 0; + if (s->strstart > 0) { /* if there is a previous byte, that is */ + max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH; + scan = s->window + s->strstart - 1; + prev = *scan++; + do { + if (*scan++ != prev) + break; + } while (++run < max); + } + + /* Emit match if have run of MIN_MATCH or longer, else emit literal */ + if (run >= MIN_MATCH) { + check_match(s, s->strstart, s->strstart - 1, run); + _tr_tally_dist(s, 1, run - MIN_MATCH, bflush); + s->lookahead -= run; + s->strstart += run; + } else { + /* No match, output a literal byte */ + Tracevv((stderr,"%c", s->window[s->strstart])); + _tr_tally_lit (s, s->window[s->strstart], bflush); + s->lookahead--; + s->strstart++; + } + if (bflush) FLUSH_BLOCK(s, 0); + } + FLUSH_BLOCK(s, flush == Z_FINISH); + return flush == Z_FINISH ? finish_done : block_done; +} +#endif diff --git a/common/dist/zlib/deflate.h b/common/dist/zlib/deflate.h new file mode 100644 index 000000000..14c056e21 --- /dev/null +++ b/common/dist/zlib/deflate.h @@ -0,0 +1,333 @@ +/* $NetBSD: deflate.h,v 1.2 2006/01/16 17:02:29 christos Exp $ */ + +/* deflate.h -- internal compression state + * Copyright (C) 1995-2004 Jean-loup Gailly + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) Id */ + +#ifndef DEFLATE_H +#define DEFLATE_H + +#include "zutil.h" + +/* define NO_GZIP when compiling if you want to disable gzip header and + trailer creation by deflate(). NO_GZIP would be used to avoid linking in + the crc code when it is not needed. For shared libraries, gzip encoding + should be left enabled. */ +#ifndef NO_GZIP +# define GZIP +#endif + +/* =========================================================================== + * Internal compression state. + */ + +#define LENGTH_CODES 29 +/* number of length codes, not counting the special END_BLOCK code */ + +#define LITERALS 256 +/* number of literal bytes 0..255 */ + +#define L_CODES (LITERALS+1+LENGTH_CODES) +/* number of Literal or Length codes, including the END_BLOCK code */ + +#define D_CODES 30 +/* number of distance codes */ + +#define BL_CODES 19 +/* number of codes used to transfer the bit lengths */ + +#define HEAP_SIZE (2*L_CODES+1) +/* maximum heap size */ + +#define MAX_BITS 15 +/* All codes must not exceed MAX_BITS bits */ + +#define INIT_STATE 42 +#define EXTRA_STATE 69 +#define NAME_STATE 73 +#define COMMENT_STATE 91 +#define HCRC_STATE 103 +#define BUSY_STATE 113 +#define FINISH_STATE 666 +/* Stream status */ + + +/* Data structure describing a single value and its code string. */ +typedef struct ct_data_s { + union { + ush freq; /* frequency count */ + ush code; /* bit string */ + } fc; + union { + ush dad; /* father node in Huffman tree */ + ush len; /* length of bit string */ + } dl; +} FAR ct_data; + +#define Freq fc.freq +#define Code fc.code +#define Dad dl.dad +#define Len dl.len + +typedef struct static_tree_desc_s static_tree_desc; + +typedef struct tree_desc_s { + ct_data *dyn_tree; /* the dynamic tree */ + int max_code; /* largest code with non zero frequency */ + static_tree_desc *stat_desc; /* the corresponding static tree */ +} FAR tree_desc; + +typedef ush Pos; +typedef Pos FAR Posf; +typedef unsigned IPos; + +/* A Pos is an index in the character window. We use short instead of int to + * save space in the various tables. IPos is used only for parameter passing. + */ + +typedef struct internal_state { + z_streamp strm; /* pointer back to this zlib stream */ + int status; /* as the name implies */ + Bytef *pending_buf; /* output still pending */ + ulg pending_buf_size; /* size of pending_buf */ + Bytef *pending_out; /* next pending byte to output to the stream */ + uInt pending; /* nb of bytes in the pending buffer */ + int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ + gz_headerp gzhead; /* gzip header information to write */ + uInt gzindex; /* where in extra, name, or comment */ + Byte method; /* STORED (for zip only) or DEFLATED */ + int last_flush; /* value of flush param for previous deflate call */ + + /* used by deflate.c: */ + + uInt w_size; /* LZ77 window size (32K by default) */ + uInt w_bits; /* log2(w_size) (8..16) */ + uInt w_mask; /* w_size - 1 */ + + Bytef *window; + /* Sliding window. Input bytes are read into the second half of the window, + * and move to the first half later to keep a dictionary of at least wSize + * bytes. With this organization, matches are limited to a distance of + * wSize-MAX_MATCH bytes, but this ensures that IO is always + * performed with a length multiple of the block size. Also, it limits + * the window size to 64K, which is quite useful on MSDOS. + * To do: use the user input buffer as sliding window. + */ + + ulg window_size; + /* Actual size of window: 2*wSize, except when the user input buffer + * is directly used as sliding window. + */ + + Posf *prev; + /* Link to older string with same hash index. To limit the size of this + * array to 64K, this link is maintained only for the last 32K strings. + * An index in this array is thus a window index modulo 32K. + */ + + Posf *head; /* Heads of the hash chains or NIL. */ + + uInt ins_h; /* hash index of string to be inserted */ + uInt hash_size; /* number of elements in hash table */ + uInt hash_bits; /* log2(hash_size) */ + uInt hash_mask; /* hash_size-1 */ + + uInt hash_shift; + /* Number of bits by which ins_h must be shifted at each input + * step. It must be such that after MIN_MATCH steps, the oldest + * byte no longer takes part in the hash key, that is: + * hash_shift * MIN_MATCH >= hash_bits + */ + + long block_start; + /* Window position at the beginning of the current output block. Gets + * negative when the window is moved backwards. + */ + + uInt match_length; /* length of best match */ + IPos prev_match; /* previous match */ + int match_available; /* set if previous match exists */ + uInt strstart; /* start of string to insert */ + uInt match_start; /* start of matching string */ + uInt lookahead; /* number of valid bytes ahead in window */ + + uInt prev_length; + /* Length of the best match at previous step. Matches not greater than this + * are discarded. This is used in the lazy match evaluation. + */ + + uInt max_chain_length; + /* To speed up deflation, hash chains are never searched beyond this + * length. A higher limit improves compression ratio but degrades the + * speed. + */ + + uInt max_lazy_match; + /* Attempt to find a better match only when the current match is strictly + * smaller than this value. This mechanism is used only for compression + * levels >= 4. + */ +# define max_insert_length max_lazy_match + /* Insert new strings in the hash table only if the match length is not + * greater than this length. This saves time but degrades compression. + * max_insert_length is used only for compression levels <= 3. + */ + + int level; /* compression level (1..9) */ + int strategy; /* favor or force Huffman coding*/ + + uInt good_match; + /* Use a faster search when the previous match is longer than this */ + + int nice_match; /* Stop searching when current match exceeds this */ + + /* used by trees.c: */ + /* Didn't use ct_data typedef below to supress compiler warning */ + struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */ + struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */ + struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */ + + struct tree_desc_s l_desc; /* desc. for literal tree */ + struct tree_desc_s d_desc; /* desc. for distance tree */ + struct tree_desc_s bl_desc; /* desc. for bit length tree */ + + ush bl_count[MAX_BITS+1]; + /* number of codes at each bit length for an optimal tree */ + + int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */ + int heap_len; /* number of elements in the heap */ + int heap_max; /* element of largest frequency */ + /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. + * The same heap array is used to build all trees. + */ + + uch depth[2*L_CODES+1]; + /* Depth of each subtree used as tie breaker for trees of equal frequency + */ + + uchf *l_buf; /* buffer for literals or lengths */ + + uInt lit_bufsize; + /* Size of match buffer for literals/lengths. There are 4 reasons for + * limiting lit_bufsize to 64K: + * - frequencies can be kept in 16 bit counters + * - if compression is not successful for the first block, all input + * data is still in the window so we can still emit a stored block even + * when input comes from standard input. (This can also be done for + * all blocks if lit_bufsize is not greater than 32K.) + * - if compression is not successful for a file smaller than 64K, we can + * even emit a stored file instead of a stored block (saving 5 bytes). + * This is applicable only for zip (not gzip or zlib). + * - creating new Huffman trees less frequently may not provide fast + * adaptation to changes in the input data statistics. (Take for + * example a binary file with poorly compressible code followed by + * a highly compressible string table.) Smaller buffer sizes give + * fast adaptation but have of course the overhead of transmitting + * trees more frequently. + * - I can't count above 4 + */ + + uInt last_lit; /* running index in l_buf */ + + ushf *d_buf; + /* Buffer for distances. To simplify the code, d_buf and l_buf have + * the same number of elements. To use different lengths, an extra flag + * array would be necessary. + */ + + ulg opt_len; /* bit length of current block with optimal trees */ + ulg static_len; /* bit length of current block with static trees */ + uInt matches; /* number of string matches in current block */ + int last_eob_len; /* bit length of EOB code for last block */ + +#ifdef ZLIB_DEBUG + ulg compressed_len; /* total bit length of compressed file mod 2^32 */ + ulg bits_sent; /* bit length of compressed data sent mod 2^32 */ +#endif + + ush bi_buf; + /* Output buffer. bits are inserted starting at the bottom (least + * significant bits). + */ + int bi_valid; + /* Number of valid bits in bi_buf. All bits above the last valid bit + * are always zero. + */ + +} FAR deflate_state; + +/* Output a byte on the stream. + * IN assertion: there is enough room in pending_buf. + */ +#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);} + + +#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) +/* Minimum amount of lookahead, except at the end of the input file. + * See deflate.c for comments about the MIN_MATCH+1. + */ + +#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD) +/* In order to simplify the code, particularly on 16 bit machines, match + * distances are limited to MAX_DIST instead of WSIZE. + */ + + /* in trees.c */ +void _tr_init OF((deflate_state *s)); +int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); +void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len, + int eof)); +void _tr_align OF((deflate_state *s)); +void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len, + int eof)); + +#define d_code(dist) \ + ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)]) +/* Mapping from a distance to a distance code. dist is the distance - 1 and + * must not have side effects. _dist_code[256] and _dist_code[257] are never + * used. + */ + +#ifndef ZLIB_DEBUG +/* Inline versions of _tr_tally for speed: */ + +#if defined(GEN_TREES_H) || !defined(STDC) + extern uch _length_code[]; + extern uch _dist_code[]; +#else + extern const uch _length_code[]; + extern const uch _dist_code[]; +#endif + +# define _tr_tally_lit(s, c, flush) \ + { uch cc = (c); \ + s->d_buf[s->last_lit] = 0; \ + s->l_buf[s->last_lit++] = cc; \ + s->dyn_ltree[cc].Freq++; \ + flush = (s->last_lit == s->lit_bufsize-1); \ + } +# define _tr_tally_dist(s, distance, length, flush) \ + { uch len = (length); \ + ush dist = (distance); \ + s->d_buf[s->last_lit] = dist; \ + s->l_buf[s->last_lit++] = len; \ + dist--; \ + s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \ + s->dyn_dtree[d_code(dist)].Freq++; \ + flush = (s->last_lit == s->lit_bufsize-1); \ + } +#else +# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c) +# define _tr_tally_dist(s, distance, length, flush) \ + flush = _tr_tally(s, distance, length) +#endif + +#endif /* DEFLATE_H */ diff --git a/common/dist/zlib/example.c b/common/dist/zlib/example.c new file mode 100644 index 000000000..4a2968092 --- /dev/null +++ b/common/dist/zlib/example.c @@ -0,0 +1,567 @@ +/* $NetBSD: example.c,v 1.1.1.1 2006/01/14 20:10:28 christos Exp $ */ + +/* example.c -- usage example of the zlib compression library + * Copyright (C) 1995-2004 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) Id */ + +#include +#include "zlib.h" + +#ifdef STDC +# include +# include +#endif + +#if defined(VMS) || defined(RISCOS) +# define TESTFILE "foo-gz" +#else +# define TESTFILE "foo.gz" +#endif + +#define CHECK_ERR(err, msg) { \ + if (err != Z_OK) { \ + fprintf(stderr, "%s error: %d\n", msg, err); \ + exit(1); \ + } \ +} + +const char hello[] = "hello, hello!"; +/* "hello world" would be more standard, but the repeated "hello" + * stresses the compression code better, sorry... + */ + +const char dictionary[] = "hello"; +uLong dictId; /* Adler32 value of the dictionary */ + +void test_compress OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_gzio OF((const char *fname, + Byte *uncompr, uLong uncomprLen)); +void test_deflate OF((Byte *compr, uLong comprLen)); +void test_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_deflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_flush OF((Byte *compr, uLong *comprLen)); +void test_sync OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_dict_deflate OF((Byte *compr, uLong comprLen)); +void test_dict_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +int main OF((int argc, char *argv[])); + +/* =========================================================================== + * Test compress() and uncompress() + */ +void test_compress(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + uLong len = (uLong)strlen(hello)+1; + + err = compress(compr, &comprLen, (const Bytef*)hello, len); + CHECK_ERR(err, "compress"); + + strcpy((char*)uncompr, "garbage"); + + err = uncompress(uncompr, &uncomprLen, compr, comprLen); + CHECK_ERR(err, "uncompress"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad uncompress\n"); + exit(1); + } else { + printf("uncompress(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test read/write of .gz files + */ +void test_gzio(fname, uncompr, uncomprLen) + const char *fname; /* compressed file name */ + Byte *uncompr; + uLong uncomprLen; +{ +#ifdef NO_GZCOMPRESS + fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n"); +#else + int err; + int len = (int)strlen(hello)+1; + gzFile file; + z_off_t pos; + + file = gzopen(fname, "wb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + gzputc(file, 'h'); + if (gzputs(file, "ello") != 4) { + fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err)); + exit(1); + } + if (gzprintf(file, ", %s!", "hello") != 8) { + fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err)); + exit(1); + } + gzseek(file, 1L, SEEK_CUR); /* add one zero byte */ + gzclose(file); + + file = gzopen(fname, "rb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + strcpy((char*)uncompr, "garbage"); + + if (gzread(file, uncompr, (unsigned)uncomprLen) != len) { + fprintf(stderr, "gzread err: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad gzread: %s\n", (char*)uncompr); + exit(1); + } else { + printf("gzread(): %s\n", (char*)uncompr); + } + + pos = gzseek(file, -8L, SEEK_CUR); + if (pos != 6 || gztell(file) != pos) { + fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n", + (long)pos, (long)gztell(file)); + exit(1); + } + + if (gzgetc(file) != ' ') { + fprintf(stderr, "gzgetc error\n"); + exit(1); + } + + if (gzungetc(' ', file) != ' ') { + fprintf(stderr, "gzungetc error\n"); + exit(1); + } + + gzgets(file, (char*)uncompr, (int)uncomprLen); + if (strlen((char*)uncompr) != 7) { /* " hello!" */ + fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello + 6)) { + fprintf(stderr, "bad gzgets after gzseek\n"); + exit(1); + } else { + printf("gzgets() after gzseek: %s\n", (char*)uncompr); + } + + gzclose(file); +#endif +} + +/* =========================================================================== + * Test deflate() with small buffers + */ +void test_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + uLong len = (uLong)strlen(hello)+1; + + c_stream.zalloc = (alloc_func)0; + c_stream.zfree = (free_func)0; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (Bytef*)hello; + c_stream.next_out = compr; + + while (c_stream.total_in != len && c_stream.total_out < comprLen) { + c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */ + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + } + /* Finish the stream, still forcing small buffers: */ + for (;;) { + c_stream.avail_out = 1; + err = deflate(&c_stream, Z_FINISH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "deflate"); + } + + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with small buffers + */ +void test_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = (alloc_func)0; + d_stream.zfree = (free_func)0; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 0; + d_stream.next_out = uncompr; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) { + d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */ + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate\n"); + exit(1); + } else { + printf("inflate(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test deflate() with large buffers and dynamic change of compression level + */ +void test_large_deflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = (alloc_func)0; + c_stream.zfree = (free_func)0; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_SPEED); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + /* At this point, uncompr is still mostly zeroes, so it should compress + * very well: + */ + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + if (c_stream.avail_in != 0) { + fprintf(stderr, "deflate not greedy\n"); + exit(1); + } + + /* Feed in already compressed data and switch to no compression: */ + deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); + c_stream.next_in = compr; + c_stream.avail_in = (uInt)comprLen/2; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + /* Switch back to compressing mode: */ + deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED); + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with large buffers + */ +void test_large_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = (alloc_func)0; + d_stream.zfree = (free_func)0; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + for (;;) { + d_stream.next_out = uncompr; /* discard the output */ + d_stream.avail_out = (uInt)uncomprLen; + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "large inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (d_stream.total_out != 2*uncomprLen + comprLen/2) { + fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out); + exit(1); + } else { + printf("large_inflate(): OK\n"); + } +} + +/* =========================================================================== + * Test deflate() with full flush + */ +void test_flush(compr, comprLen) + Byte *compr; + uLong *comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + uInt len = (uInt)strlen(hello)+1; + + c_stream.zalloc = (alloc_func)0; + c_stream.zfree = (free_func)0; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (Bytef*)hello; + c_stream.next_out = compr; + c_stream.avail_in = 3; + c_stream.avail_out = (uInt)*comprLen; + err = deflate(&c_stream, Z_FULL_FLUSH); + CHECK_ERR(err, "deflate"); + + compr[3]++; /* force an error in first compressed block */ + c_stream.avail_in = len - 3; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + CHECK_ERR(err, "deflate"); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); + + *comprLen = c_stream.total_out; +} + +/* =========================================================================== + * Test inflateSync() + */ +void test_sync(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = (alloc_func)0; + d_stream.zfree = (free_func)0; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 2; /* just read the zlib header */ + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + inflate(&d_stream, Z_NO_FLUSH); + CHECK_ERR(err, "inflate"); + + d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */ + err = inflateSync(&d_stream); /* but skip the damaged part */ + CHECK_ERR(err, "inflateSync"); + + err = inflate(&d_stream, Z_FINISH); + if (err != Z_DATA_ERROR) { + fprintf(stderr, "inflate should report DATA_ERROR\n"); + /* Because of incorrect adler32 */ + exit(1); + } + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + printf("after inflateSync(): hel%s\n", (char *)uncompr); +} + +/* =========================================================================== + * Test deflate() with preset dictionary + */ +void test_dict_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = (alloc_func)0; + c_stream.zfree = (free_func)0; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + err = deflateSetDictionary(&c_stream, + (const Bytef*)dictionary, sizeof(dictionary)); + CHECK_ERR(err, "deflateSetDictionary"); + + dictId = c_stream.adler; + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + c_stream.next_in = (Bytef*)hello; + c_stream.avail_in = (uInt)strlen(hello)+1; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with a preset dictionary + */ +void test_dict_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = (alloc_func)0; + d_stream.zfree = (free_func)0; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + for (;;) { + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + if (err == Z_NEED_DICT) { + if (d_stream.adler != dictId) { + fprintf(stderr, "unexpected dictionary"); + exit(1); + } + err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary, + sizeof(dictionary)); + } + CHECK_ERR(err, "inflate with dict"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate with dict\n"); + exit(1); + } else { + printf("inflate with dictionary: %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Usage: example [output.gz [input.gz]] + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + Byte *compr, *uncompr; + uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */ + uLong uncomprLen = comprLen; + static const char* myVersion = ZLIB_VERSION; + + if (zlibVersion()[0] != myVersion[0]) { + fprintf(stderr, "incompatible zlib version\n"); + exit(1); + + } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) { + fprintf(stderr, "warning: different zlib version\n"); + } + + printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n", + ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags()); + + compr = (Byte*)calloc((uInt)comprLen, 1); + uncompr = (Byte*)calloc((uInt)uncomprLen, 1); + /* compr and uncompr are cleared to avoid reading uninitialized + * data and to ensure that uncompr compresses well. + */ + if (compr == Z_NULL || uncompr == Z_NULL) { + printf("out of memory\n"); + exit(1); + } + test_compress(compr, comprLen, uncompr, uncomprLen); + + test_gzio((argc > 1 ? argv[1] : TESTFILE), + uncompr, uncomprLen); + + test_deflate(compr, comprLen); + test_inflate(compr, comprLen, uncompr, uncomprLen); + + test_large_deflate(compr, comprLen, uncompr, uncomprLen); + test_large_inflate(compr, comprLen, uncompr, uncomprLen); + + test_flush(compr, &comprLen); + test_sync(compr, comprLen, uncompr, uncomprLen); + comprLen = uncomprLen; + + test_dict_deflate(compr, comprLen); + test_dict_inflate(compr, comprLen, uncompr, uncomprLen); + + free(compr); + free(uncompr); + + return 0; +} diff --git a/common/dist/zlib/examples/README.examples b/common/dist/zlib/examples/README.examples new file mode 100644 index 000000000..5632d7a4c --- /dev/null +++ b/common/dist/zlib/examples/README.examples @@ -0,0 +1,42 @@ +This directory contains examples of the use of zlib. + +fitblk.c + compress just enough input to nearly fill a requested output size + - zlib isn't designed to do this, but fitblk does it anyway + +gun.c + uncompress a gzip file + - illustrates the use of inflateBack() for high speed file-to-file + decompression using call-back functions + - is approximately twice as fast as gzip -d + - also provides Unix uncompress functionality, again twice as fast + +gzappend.c + append to a gzip file + - illustrates the use of the Z_BLOCK flush parameter for inflate() + - illustrates the use of deflatePrime() to start at any bit + +gzjoin.c + join gzip files without recalculating the crc or recompressing + - illustrates the use of the Z_BLOCK flush parameter for inflate() + - illustrates the use of crc32_combine() + +gzlog.c +gzlog.h + efficiently maintain a message log file in gzip format + - illustrates use of raw deflate and Z_SYNC_FLUSH + - illustrates use of gzip header extra field + +zlib_how.html + painfully comprehensive description of zpipe.c (see below) + - describes in excruciating detail the use of deflate() and inflate() + +zpipe.c + reads and writes zlib streams from stdin to stdout + - illustrates the proper use of deflate() and inflate() + - deeply commented in zlib_how.html (see above) + +zran.c + index a zlib or gzip stream and randomly access it + - illustrates the use of Z_BLOCK, inflatePrime(), and + inflateSetDictionary() to provide random access diff --git a/common/dist/zlib/examples/fitblk.c b/common/dist/zlib/examples/fitblk.c new file mode 100644 index 000000000..8b16e87ec --- /dev/null +++ b/common/dist/zlib/examples/fitblk.c @@ -0,0 +1,235 @@ +/* $NetBSD: fitblk.c,v 1.1.1.1 2006/01/14 20:11:08 christos Exp $ */ + +/* fitblk.c: example of fitting compressed output to a specified size + Not copyrighted -- provided to the public domain + Version 1.1 25 November 2004 Mark Adler */ + +/* Version history: + 1.0 24 Nov 2004 First version + 1.1 25 Nov 2004 Change deflateInit2() to deflateInit() + Use fixed-size, stack-allocated raw buffers + Simplify code moving compression to subroutines + Use assert() for internal errors + Add detailed description of approach + */ + +/* Approach to just fitting a requested compressed size: + + fitblk performs three compression passes on a portion of the input + data in order to determine how much of that input will compress to + nearly the requested output block size. The first pass generates + enough deflate blocks to produce output to fill the requested + output size plus a specfied excess amount (see the EXCESS define + below). The last deflate block may go quite a bit past that, but + is discarded. The second pass decompresses and recompresses just + the compressed data that fit in the requested plus excess sized + buffer. The deflate process is terminated after that amount of + input, which is less than the amount consumed on the first pass. + The last deflate block of the result will be of a comparable size + to the final product, so that the header for that deflate block and + the compression ratio for that block will be about the same as in + the final product. The third compression pass decompresses the + result of the second step, but only the compressed data up to the + requested size minus an amount to allow the compressed stream to + complete (see the MARGIN define below). That will result in a + final compressed stream whose length is less than or equal to the + requested size. Assuming sufficient input and a requested size + greater than a few hundred bytes, the shortfall will typically be + less than ten bytes. + + If the input is short enough that the first compression completes + before filling the requested output size, then that compressed + stream is return with no recompression. + + EXCESS is chosen to be just greater than the shortfall seen in a + two pass approach similar to the above. That shortfall is due to + the last deflate block compressing more efficiently with a smaller + header on the second pass. EXCESS is set to be large enough so + that there is enough uncompressed data for the second pass to fill + out the requested size, and small enough so that the final deflate + block of the second pass will be close in size to the final deflate + block of the third and final pass. MARGIN is chosen to be just + large enough to assure that the final compression has enough room + to complete in all cases. + */ + +#include +#include +#include +#include "zlib.h" + +#define local static + +/* print nastygram and leave */ +local void quit(char *why) +{ + fprintf(stderr, "fitblk abort: %s\n", why); + exit(1); +} + +#define RAWLEN 4096 /* intermediate uncompressed buffer size */ + +/* compress from file to def until provided buffer is full or end of + input reached; return last deflate() return value, or Z_ERRNO if + there was read error on the file */ +local int partcompress(FILE *in, z_streamp def) +{ + int ret, flush; + unsigned char raw[RAWLEN]; + + flush = Z_NO_FLUSH; + do { + def->avail_in = fread(raw, 1, RAWLEN, in); + if (ferror(in)) + return Z_ERRNO; + def->next_in = raw; + if (feof(in)) + flush = Z_FINISH; + ret = deflate(def, flush); + assert(ret != Z_STREAM_ERROR); + } while (def->avail_out != 0 && flush == Z_NO_FLUSH); + return ret; +} + +/* recompress from inf's input to def's output; the input for inf and + the output for def are set in those structures before calling; + return last deflate() return value, or Z_MEM_ERROR if inflate() + was not able to allocate enough memory when it needed to */ +local int recompress(z_streamp inf, z_streamp def) +{ + int ret, flush; + unsigned char raw[RAWLEN]; + + flush = Z_NO_FLUSH; + do { + /* decompress */ + inf->avail_out = RAWLEN; + inf->next_out = raw; + ret = inflate(inf, Z_NO_FLUSH); + assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR && + ret != Z_NEED_DICT); + if (ret == Z_MEM_ERROR) + return ret; + + /* compress what was decompresed until done or no room */ + def->avail_in = RAWLEN - inf->avail_out; + def->next_in = raw; + if (inf->avail_out != 0) + flush = Z_FINISH; + ret = deflate(def, flush); + assert(ret != Z_STREAM_ERROR); + } while (ret != Z_STREAM_END && def->avail_out != 0); + return ret; +} + +#define EXCESS 256 /* empirically determined stream overage */ +#define MARGIN 8 /* amount to back off for completion */ + +/* compress from stdin to fixed-size block on stdout */ +int main(int argc, char **argv) +{ + int ret; /* return code */ + unsigned size; /* requested fixed output block size */ + unsigned have; /* bytes written by deflate() call */ + unsigned char *blk; /* intermediate and final stream */ + unsigned char *tmp; /* close to desired size stream */ + z_stream def, inf; /* zlib deflate and inflate states */ + + /* get requested output size */ + if (argc != 2) + quit("need one argument: size of output block"); + ret = strtol(argv[1], argv + 1, 10); + if (argv[1][0] != 0) + quit("argument must be a number"); + if (ret < 8) /* 8 is minimum zlib stream size */ + quit("need positive size of 8 or greater"); + size = (unsigned)ret; + + /* allocate memory for buffers and compression engine */ + blk = malloc(size + EXCESS); + def.zalloc = Z_NULL; + def.zfree = Z_NULL; + def.opaque = Z_NULL; + ret = deflateInit(&def, Z_DEFAULT_COMPRESSION); + if (ret != Z_OK || blk == NULL) + quit("out of memory"); + + /* compress from stdin until output full, or no more input */ + def.avail_out = size + EXCESS; + def.next_out = blk; + ret = partcompress(stdin, &def); + if (ret == Z_ERRNO) + quit("error reading input"); + + /* if it all fit, then size was undersubscribed -- done! */ + if (ret == Z_STREAM_END && def.avail_out >= EXCESS) { + /* write block to stdout */ + have = size + EXCESS - def.avail_out; + if (fwrite(blk, 1, have, stdout) != have || ferror(stdout)) + quit("error writing output"); + + /* clean up and print results to stderr */ + ret = deflateEnd(&def); + assert(ret != Z_STREAM_ERROR); + free(blk); + fprintf(stderr, + "%u bytes unused out of %u requested (all input)\n", + size - have, size); + return 0; + } + + /* it didn't all fit -- set up for recompression */ + inf.zalloc = Z_NULL; + inf.zfree = Z_NULL; + inf.opaque = Z_NULL; + inf.avail_in = 0; + inf.next_in = Z_NULL; + ret = inflateInit(&inf); + tmp = malloc(size + EXCESS); + if (ret != Z_OK || tmp == NULL) + quit("out of memory"); + ret = deflateReset(&def); + assert(ret != Z_STREAM_ERROR); + + /* do first recompression close to the right amount */ + inf.avail_in = size + EXCESS; + inf.next_in = blk; + def.avail_out = size + EXCESS; + def.next_out = tmp; + ret = recompress(&inf, &def); + if (ret == Z_MEM_ERROR) + quit("out of memory"); + + /* set up for next reocmpression */ + ret = inflateReset(&inf); + assert(ret != Z_STREAM_ERROR); + ret = deflateReset(&def); + assert(ret != Z_STREAM_ERROR); + + /* do second and final recompression (third compression) */ + inf.avail_in = size - MARGIN; /* assure stream will complete */ + inf.next_in = tmp; + def.avail_out = size; + def.next_out = blk; + ret = recompress(&inf, &def); + if (ret == Z_MEM_ERROR) + quit("out of memory"); + assert(ret == Z_STREAM_END); /* otherwise MARGIN too small */ + + /* done -- write block to stdout */ + have = size - def.avail_out; + if (fwrite(blk, 1, have, stdout) != have || ferror(stdout)) + quit("error writing output"); + + /* clean up and print results to stderr */ + free(tmp); + ret = inflateEnd(&inf); + assert(ret != Z_STREAM_ERROR); + ret = deflateEnd(&def); + assert(ret != Z_STREAM_ERROR); + free(blk); + fprintf(stderr, + "%u bytes unused out of %u requested (%lu input)\n", + size - have, size, def.total_in); + return 0; +} diff --git a/common/dist/zlib/examples/gun.c b/common/dist/zlib/examples/gun.c new file mode 100644 index 000000000..d68eb6d5b --- /dev/null +++ b/common/dist/zlib/examples/gun.c @@ -0,0 +1,695 @@ +/* $NetBSD: gun.c,v 1.1.1.1 2006/01/14 20:11:08 christos Exp $ */ + +/* gun.c -- simple gunzip to give an example of the use of inflateBack() + * Copyright (C) 2003, 2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + Version 1.3 12 June 2005 Mark Adler */ + +/* Version history: + 1.0 16 Feb 2003 First version for testing of inflateBack() + 1.1 21 Feb 2005 Decompress concatenated gzip streams + Remove use of "this" variable (C++ keyword) + Fix return value for in() + Improve allocation failure checking + Add typecasting for void * structures + Add -h option for command version and usage + Add a bunch of comments + 1.2 20 Mar 2005 Add Unix compress (LZW) decompression + Copy file attributes from input file to output file + 1.3 12 Jun 2005 Add casts for error messages [Oberhumer] + */ + +/* + gun [ -t ] [ name ... ] + + decompresses the data in the named gzip files. If no arguments are given, + gun will decompress from stdin to stdout. The names must end in .gz, -gz, + .z, -z, _z, or .Z. The uncompressed data will be written to a file name + with the suffix stripped. On success, the original file is deleted. On + failure, the output file is deleted. For most failures, the command will + continue to process the remaining names on the command line. A memory + allocation failure will abort the command. If -t is specified, then the + listed files or stdin will be tested as gzip files for integrity (without + checking for a proper suffix), no output will be written, and no files + will be deleted. + + Like gzip, gun allows concatenated gzip streams and will decompress them, + writing all of the uncompressed data to the output. Unlike gzip, gun allows + an empty file on input, and will produce no error writing an empty output + file. + + gun will also decompress files made by Unix compress, which uses LZW + compression. These files are automatically detected by virtue of their + magic header bytes. Since the end of Unix compress stream is marked by the + end-of-file, they cannot be concantenated. If a Unix compress stream is + encountered in an input file, it is the last stream in that file. + + Like gunzip and uncompress, the file attributes of the orignal compressed + file are maintained in the final uncompressed file, to the extent that the + user permissions allow it. + + On my Mac OS X PowerPC G4, gun is almost twice as fast as gunzip (version + 1.2.4) is on the same file, when gun is linked with zlib 1.2.2. Also the + LZW decompression provided by gun is about twice as fast as the standard + Unix uncompress command. + */ + +/* external functions and related types and constants */ +#include /* fprintf() */ +#include /* malloc(), free() */ +#include /* strerror(), strcmp(), strlen(), memcpy() */ +#include /* errno */ +#include /* open() */ +#include /* read(), write(), close(), chown(), unlink() */ +#include +#include /* stat(), chmod() */ +#include /* utime() */ +#include "zlib.h" /* inflateBackInit(), inflateBack(), */ + /* inflateBackEnd(), crc32() */ + +/* function declaration */ +#define local static + +/* buffer constants */ +#define SIZE 32768U /* input and output buffer sizes */ +#define PIECE 16384 /* limits i/o chunks for 16-bit int case */ + +/* structure for infback() to pass to input function in() -- it maintains the + input file and a buffer of size SIZE */ +struct ind { + int infile; + unsigned char *inbuf; +}; + +/* Load input buffer, assumed to be empty, and return bytes loaded and a + pointer to them. read() is called until the buffer is full, or until it + returns end-of-file or error. Return 0 on error. */ +local unsigned in(void *in_desc, unsigned char **buf) +{ + int ret; + unsigned len; + unsigned char *next; + struct ind *me = (struct ind *)in_desc; + + next = me->inbuf; + *buf = next; + len = 0; + do { + ret = PIECE; + if ((unsigned)ret > SIZE - len) + ret = (int)(SIZE - len); + ret = (int)read(me->infile, next, ret); + if (ret == -1) { + len = 0; + break; + } + next += ret; + len += ret; + } while (ret != 0 && len < SIZE); + return len; +} + +/* structure for infback() to pass to output function out() -- it maintains the + output file, a running CRC-32 check on the output and the total number of + bytes output, both for checking against the gzip trailer. (The length in + the gzip trailer is stored modulo 2^32, so it's ok if a long is 32 bits and + the output is greater than 4 GB.) */ +struct outd { + int outfile; + int check; /* true if checking crc and total */ + unsigned long crc; + unsigned long total; +}; + +/* Write output buffer and update the CRC-32 and total bytes written. write() + is called until all of the output is written or an error is encountered. + On success out() returns 0. For a write failure, out() returns 1. If the + output file descriptor is -1, then nothing is written. + */ +local int out(void *out_desc, unsigned char *buf, unsigned len) +{ + int ret; + struct outd *me = (struct outd *)out_desc; + + if (me->check) { + me->crc = crc32(me->crc, buf, len); + me->total += len; + } + if (me->outfile != -1) + do { + ret = PIECE; + if ((unsigned)ret > len) + ret = (int)len; + ret = (int)write(me->outfile, buf, ret); + if (ret == -1) + return 1; + buf += ret; + len -= ret; + } while (len != 0); + return 0; +} + +/* next input byte macro for use inside lunpipe() and gunpipe() */ +#define NEXT() (have ? 0 : (have = in(indp, &next)), \ + last = have ? (have--, (int)(*next++)) : -1) + +/* memory for gunpipe() and lunpipe() -- + the first 256 entries of prefix[] and suffix[] are never used, could + have offset the index, but it's faster to waste the memory */ +unsigned char inbuf[SIZE]; /* input buffer */ +unsigned char outbuf[SIZE]; /* output buffer */ +unsigned short prefix[65536]; /* index to LZW prefix string */ +unsigned char suffix[65536]; /* one-character LZW suffix */ +unsigned char match[65280 + 2]; /* buffer for reversed match or gzip + 32K sliding window */ + +/* throw out what's left in the current bits byte buffer (this is a vestigial + aspect of the compressed data format derived from an implementation that + made use of a special VAX machine instruction!) */ +#define FLUSHCODE() \ + do { \ + left = 0; \ + rem = 0; \ + if (chunk > have) { \ + chunk -= have; \ + have = 0; \ + if (NEXT() == -1) \ + break; \ + chunk--; \ + if (chunk > have) { \ + chunk = have = 0; \ + break; \ + } \ + } \ + have -= chunk; \ + next += chunk; \ + chunk = 0; \ + } while (0) + +/* Decompress a compress (LZW) file from indp to outfile. The compress magic + header (two bytes) has already been read and verified. There are have bytes + of buffered input at next. strm is used for passing error information back + to gunpipe(). + + lunpipe() will return Z_OK on success, Z_BUF_ERROR for an unexpected end of + file, read error, or write error (a write error indicated by strm->next_in + not equal to Z_NULL), or Z_DATA_ERROR for invalid input. + */ +local int lunpipe(unsigned have, unsigned char *next, struct ind *indp, + int outfile, z_stream *strm) +{ + int last; /* last byte read by NEXT(), or -1 if EOF */ + int chunk; /* bytes left in current chunk */ + int left; /* bits left in rem */ + unsigned rem; /* unused bits from input */ + int bits; /* current bits per code */ + unsigned code; /* code, table traversal index */ + unsigned mask; /* mask for current bits codes */ + int max; /* maximum bits per code for this stream */ + int flags; /* compress flags, then block compress flag */ + unsigned end; /* last valid entry in prefix/suffix tables */ + unsigned temp; /* current code */ + unsigned prev; /* previous code */ + unsigned final; /* last character written for previous code */ + unsigned stack; /* next position for reversed string */ + unsigned outcnt; /* bytes in output buffer */ + struct outd outd; /* output structure */ + + /* set up output */ + outd.outfile = outfile; + outd.check = 0; + + /* process remainder of compress header -- a flags byte */ + flags = NEXT(); + if (last == -1) + return Z_BUF_ERROR; + if (flags & 0x60) { + strm->msg = (char *)"unknown lzw flags set"; + return Z_DATA_ERROR; + } + max = flags & 0x1f; + if (max < 9 || max > 16) { + strm->msg = (char *)"lzw bits out of range"; + return Z_DATA_ERROR; + } + if (max == 9) /* 9 doesn't really mean 9 */ + max = 10; + flags &= 0x80; /* true if block compress */ + + /* clear table */ + bits = 9; + mask = 0x1ff; + end = flags ? 256 : 255; + + /* set up: get first 9-bit code, which is the first decompressed byte, but + don't create a table entry until the next code */ + if (NEXT() == -1) /* no compressed data is ok */ + return Z_OK; + final = prev = (unsigned)last; /* low 8 bits of code */ + if (NEXT() == -1) /* missing a bit */ + return Z_BUF_ERROR; + if (last & 1) { /* code must be < 256 */ + strm->msg = (char *)"invalid lzw code"; + return Z_DATA_ERROR; + } + rem = (unsigned)last >> 1; /* remaining 7 bits */ + left = 7; + chunk = bits - 2; /* 7 bytes left in this chunk */ + outbuf[0] = (unsigned char)final; /* write first decompressed byte */ + outcnt = 1; + + /* decode codes */ + stack = 0; + for (;;) { + /* if the table will be full after this, increment the code size */ + if (end >= mask && bits < max) { + FLUSHCODE(); + bits++; + mask <<= 1; + mask++; + } + + /* get a code of length bits */ + if (chunk == 0) /* decrement chunk modulo bits */ + chunk = bits; + code = rem; /* low bits of code */ + if (NEXT() == -1) { /* EOF is end of compressed data */ + /* write remaining buffered output */ + if (outcnt && out(&outd, outbuf, outcnt)) { + strm->next_in = outbuf; /* signal write error */ + return Z_BUF_ERROR; + } + return Z_OK; + } + code += (unsigned)last << left; /* middle (or high) bits of code */ + left += 8; + chunk--; + if (bits > left) { /* need more bits */ + if (NEXT() == -1) /* can't end in middle of code */ + return Z_BUF_ERROR; + code += (unsigned)last << left; /* high bits of code */ + left += 8; + chunk--; + } + code &= mask; /* mask to current code length */ + left -= bits; /* number of unused bits */ + rem = (unsigned)last >> (8 - left); /* unused bits from last byte */ + + /* process clear code (256) */ + if (code == 256 && flags) { + FLUSHCODE(); + bits = 9; /* initialize bits and mask */ + mask = 0x1ff; + end = 255; /* empty table */ + continue; /* get next code */ + } + + /* special code to reuse last match */ + temp = code; /* save the current code */ + if (code > end) { + /* Be picky on the allowed code here, and make sure that the code + we drop through (prev) will be a valid index so that random + input does not cause an exception. The code != end + 1 check is + empirically derived, and not checked in the original uncompress + code. If this ever causes a problem, that check could be safely + removed. Leaving this check in greatly improves gun's ability + to detect random or corrupted input after a compress header. + In any case, the prev > end check must be retained. */ + if (code != end + 1 || prev > end) { + strm->msg = (char *)"invalid lzw code"; + return Z_DATA_ERROR; + } + match[stack++] = (unsigned char)final; + code = prev; + } + + /* walk through linked list to generate output in reverse order */ + while (code >= 256) { + match[stack++] = suffix[code]; + code = prefix[code]; + } + match[stack++] = (unsigned char)code; + final = code; + + /* link new table entry */ + if (end < mask) { + end++; + prefix[end] = (unsigned short)prev; + suffix[end] = (unsigned char)final; + } + + /* set previous code for next iteration */ + prev = temp; + + /* write output in forward order */ + while (stack > SIZE - outcnt) { + while (outcnt < SIZE) + outbuf[outcnt++] = match[--stack]; + if (out(&outd, outbuf, outcnt)) { + strm->next_in = outbuf; /* signal write error */ + return Z_BUF_ERROR; + } + outcnt = 0; + } + do { + outbuf[outcnt++] = match[--stack]; + } while (stack); + + /* loop for next code with final and prev as the last match, rem and + left provide the first 0..7 bits of the next code, end is the last + valid table entry */ + } +} + +/* Decompress a gzip file from infile to outfile. strm is assumed to have been + successfully initialized with inflateBackInit(). The input file may consist + of a series of gzip streams, in which case all of them will be decompressed + to the output file. If outfile is -1, then the gzip stream(s) integrity is + checked and nothing is written. + + The return value is a zlib error code: Z_MEM_ERROR if out of memory, + Z_DATA_ERROR if the header or the compressed data is invalid, or if the + trailer CRC-32 check or length doesn't match, Z_BUF_ERROR if the input ends + prematurely or a write error occurs, or Z_ERRNO if junk (not a another gzip + stream) follows a valid gzip stream. + */ +local int gunpipe(z_stream *strm, int infile, int outfile) +{ + int ret, first, last; + unsigned have, flags, len; + unsigned char *next; + struct ind ind, *indp; + struct outd outd; + + /* setup input buffer */ + ind.infile = infile; + ind.inbuf = inbuf; + indp = &ind; + + /* decompress concatenated gzip streams */ + have = 0; /* no input data read in yet */ + first = 1; /* looking for first gzip header */ + strm->next_in = Z_NULL; /* so Z_BUF_ERROR means EOF */ + for (;;) { + /* look for the two magic header bytes for a gzip stream */ + if (NEXT() == -1) { + ret = Z_OK; + break; /* empty gzip stream is ok */ + } + if (last != 31 || (NEXT() != 139 && last != 157)) { + strm->msg = (char *)"incorrect header check"; + ret = first ? Z_DATA_ERROR : Z_ERRNO; + break; /* not a gzip or compress header */ + } + first = 0; /* next non-header is junk */ + + /* process a compress (LZW) file -- can't be concatenated after this */ + if (last == 157) { + ret = lunpipe(have, next, indp, outfile, strm); + break; + } + + /* process remainder of gzip header */ + ret = Z_BUF_ERROR; + if (NEXT() != 8) { /* only deflate method allowed */ + if (last == -1) break; + strm->msg = (char *)"unknown compression method"; + ret = Z_DATA_ERROR; + break; + } + flags = NEXT(); /* header flags */ + NEXT(); /* discard mod time, xflgs, os */ + NEXT(); + NEXT(); + NEXT(); + NEXT(); + NEXT(); + if (last == -1) break; + if (flags & 0xe0) { + strm->msg = (char *)"unknown header flags set"; + ret = Z_DATA_ERROR; + break; + } + if (flags & 4) { /* extra field */ + len = NEXT(); + len += (unsigned)(NEXT()) << 8; + if (last == -1) break; + while (len > have) { + len -= have; + have = 0; + if (NEXT() == -1) break; + len--; + } + if (last == -1) break; + have -= len; + next += len; + } + if (flags & 8) /* file name */ + while (NEXT() != 0 && last != -1) + ; + if (flags & 16) /* comment */ + while (NEXT() != 0 && last != -1) + ; + if (flags & 2) { /* header crc */ + NEXT(); + NEXT(); + } + if (last == -1) break; + + /* set up output */ + outd.outfile = outfile; + outd.check = 1; + outd.crc = crc32(0L, Z_NULL, 0); + outd.total = 0; + + /* decompress data to output */ + strm->next_in = next; + strm->avail_in = have; + ret = inflateBack(strm, in, indp, out, &outd); + if (ret != Z_STREAM_END) break; + next = strm->next_in; + have = strm->avail_in; + strm->next_in = Z_NULL; /* so Z_BUF_ERROR means EOF */ + + /* check trailer */ + ret = Z_BUF_ERROR; + if (NEXT() != (outd.crc & 0xff) || + NEXT() != ((outd.crc >> 8) & 0xff) || + NEXT() != ((outd.crc >> 16) & 0xff) || + NEXT() != ((outd.crc >> 24) & 0xff)) { + /* crc error */ + if (last != -1) { + strm->msg = (char *)"incorrect data check"; + ret = Z_DATA_ERROR; + } + break; + } + if (NEXT() != (outd.total & 0xff) || + NEXT() != ((outd.total >> 8) & 0xff) || + NEXT() != ((outd.total >> 16) & 0xff) || + NEXT() != ((outd.total >> 24) & 0xff)) { + /* length error */ + if (last != -1) { + strm->msg = (char *)"incorrect length check"; + ret = Z_DATA_ERROR; + } + break; + } + + /* go back and look for another gzip stream */ + } + + /* clean up and return */ + return ret; +} + +/* Copy file attributes, from -> to, as best we can. This is best effort, so + no errors are reported. The mode bits, including suid, sgid, and the sticky + bit are copied (if allowed), the owner's user id and group id are copied + (again if allowed), and the access and modify times are copied. */ +local void copymeta(char *from, char *to) +{ + struct stat was; + struct utimbuf when; + + /* get all of from's Unix meta data, return if not a regular file */ + if (stat(from, &was) != 0 || (was.st_mode & S_IFMT) != S_IFREG) + return; + + /* set to's mode bits, ignore errors */ + (void)chmod(to, was.st_mode & 07777); + + /* copy owner's user and group, ignore errors */ + (void)chown(to, was.st_uid, was.st_gid); + + /* copy access and modify times, ignore errors */ + when.actime = was.st_atime; + when.modtime = was.st_mtime; + (void)utime(to, &when); +} + +/* Decompress the file inname to the file outnname, of if test is true, just + decompress without writing and check the gzip trailer for integrity. If + inname is NULL or an empty string, read from stdin. If outname is NULL or + an empty string, write to stdout. strm is a pre-initialized inflateBack + structure. When appropriate, copy the file attributes from inname to + outname. + + gunzip() returns 1 if there is an out-of-memory error or an unexpected + return code from gunpipe(). Otherwise it returns 0. + */ +local int gunzip(z_stream *strm, char *inname, char *outname, int test) +{ + int ret; + int infile, outfile; + + /* open files */ + if (inname == NULL || *inname == 0) { + inname = "-"; + infile = 0; /* stdin */ + } + else { + infile = open(inname, O_RDONLY, 0); + if (infile == -1) { + fprintf(stderr, "gun cannot open %s\n", inname); + return 0; + } + } + if (test) + outfile = -1; + else if (outname == NULL || *outname == 0) { + outname = "-"; + outfile = 1; /* stdout */ + } + else { + outfile = open(outname, O_CREAT | O_TRUNC | O_WRONLY, 0666); + if (outfile == -1) { + close(infile); + fprintf(stderr, "gun cannot create %s\n", outname); + return 0; + } + } + errno = 0; + + /* decompress */ + ret = gunpipe(strm, infile, outfile); + if (outfile > 2) close(outfile); + if (infile > 2) close(infile); + + /* interpret result */ + switch (ret) { + case Z_OK: + case Z_ERRNO: + if (infile > 2 && outfile > 2) { + copymeta(inname, outname); /* copy attributes */ + unlink(inname); + } + if (ret == Z_ERRNO) + fprintf(stderr, "gun warning: trailing garbage ignored in %s\n", + inname); + break; + case Z_DATA_ERROR: + if (outfile > 2) unlink(outname); + fprintf(stderr, "gun data error on %s: %s\n", inname, strm->msg); + break; + case Z_MEM_ERROR: + if (outfile > 2) unlink(outname); + fprintf(stderr, "gun out of memory error--aborting\n"); + return 1; + case Z_BUF_ERROR: + if (outfile > 2) unlink(outname); + if (strm->next_in != Z_NULL) { + fprintf(stderr, "gun write error on %s: %s\n", + outname, strerror(errno)); + } + else if (errno) { + fprintf(stderr, "gun read error on %s: %s\n", + inname, strerror(errno)); + } + else { + fprintf(stderr, "gun unexpected end of file on %s\n", + inname); + } + break; + default: + if (outfile > 2) unlink(outname); + fprintf(stderr, "gun internal error--aborting\n"); + return 1; + } + return 0; +} + +/* Process the gun command line arguments. See the command syntax near the + beginning of this source file. */ +int main(int argc, char **argv) +{ + int ret, len, test; + char *outname; + unsigned char *window; + z_stream strm; + + /* initialize inflateBack state for repeated use */ + window = match; /* reuse LZW match buffer */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + ret = inflateBackInit(&strm, 15, window); + if (ret != Z_OK) { + fprintf(stderr, "gun out of memory error--aborting\n"); + return 1; + } + + /* decompress each file to the same name with the suffix removed */ + argc--; + argv++; + test = 0; + if (argc && strcmp(*argv, "-h") == 0) { + fprintf(stderr, "gun 1.3 (12 Jun 2005)\n"); + fprintf(stderr, "Copyright (c) 2005 Mark Adler\n"); + fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n"); + return 0; + } + if (argc && strcmp(*argv, "-t") == 0) { + test = 1; + argc--; + argv++; + } + if (argc) + do { + if (test) + outname = NULL; + else { + len = (int)strlen(*argv); + if (strcmp(*argv + len - 3, ".gz") == 0 || + strcmp(*argv + len - 3, "-gz") == 0) + len -= 3; + else if (strcmp(*argv + len - 2, ".z") == 0 || + strcmp(*argv + len - 2, "-z") == 0 || + strcmp(*argv + len - 2, "_z") == 0 || + strcmp(*argv + len - 2, ".Z") == 0) + len -= 2; + else { + fprintf(stderr, "gun error: no gz type on %s--skipping\n", + *argv); + continue; + } + outname = malloc(len + 1); + if (outname == NULL) { + fprintf(stderr, "gun out of memory error--aborting\n"); + ret = 1; + break; + } + memcpy(outname, *argv, len); + outname[len] = 0; + } + ret = gunzip(&strm, *argv, outname, test); + if (outname != NULL) free(outname); + if (ret) break; + } while (argv++, --argc); + else + ret = gunzip(&strm, NULL, NULL, test); + + /* clean up */ + inflateBackEnd(&strm); + return ret; +} diff --git a/common/dist/zlib/examples/gzappend.c b/common/dist/zlib/examples/gzappend.c new file mode 100644 index 000000000..7f4926cc6 --- /dev/null +++ b/common/dist/zlib/examples/gzappend.c @@ -0,0 +1,502 @@ +/* $NetBSD: gzappend.c,v 1.1.1.1 2006/01/14 20:11:08 christos Exp $ */ + +/* gzappend -- command to append to a gzip file + + Copyright (C) 2003 Mark Adler, all rights reserved + version 1.1, 4 Nov 2003 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + +/* + * Change history: + * + * 1.0 19 Oct 2003 - First version + * 1.1 4 Nov 2003 - Expand and clarify some comments and notes + * - Add version and copyright to help + * - Send help to stdout instead of stderr + * - Add some preemptive typecasts + * - Add L to constants in lseek() calls + * - Remove some debugging information in error messages + * - Use new data_type definition for zlib 1.2.1 + * - Simplfy and unify file operations + * - Finish off gzip file in gztack() + * - Use deflatePrime() instead of adding empty blocks + * - Keep gzip file clean on appended file read errors + * - Use in-place rotate instead of auxiliary buffer + * (Why you ask? Because it was fun to write!) + */ + +/* + gzappend takes a gzip file and appends to it, compressing files from the + command line or data from stdin. The gzip file is written to directly, to + avoid copying that file, in case it's large. Note that this results in the + unfriendly behavior that if gzappend fails, the gzip file is corrupted. + + This program was written to illustrate the use of the new Z_BLOCK option of + zlib 1.2.x's inflate() function. This option returns from inflate() at each + block boundary to facilitate locating and modifying the last block bit at + the start of the final deflate block. Also whether using Z_BLOCK or not, + another required feature of zlib 1.2.x is that inflate() now provides the + number of unusued bits in the last input byte used. gzappend will not work + with versions of zlib earlier than 1.2.1. + + gzappend first decompresses the gzip file internally, discarding all but + the last 32K of uncompressed data, and noting the location of the last block + bit and the number of unused bits in the last byte of the compressed data. + The gzip trailer containing the CRC-32 and length of the uncompressed data + is verified. This trailer will be later overwritten. + + Then the last block bit is cleared by seeking back in the file and rewriting + the byte that contains it. Seeking forward, the last byte of the compressed + data is saved along with the number of unused bits to initialize deflate. + + A deflate process is initialized, using the last 32K of the uncompressed + data from the gzip file to initialize the dictionary. If the total + uncompressed data was less than 32K, then all of it is used to initialize + the dictionary. The deflate output bit buffer is also initialized with the + last bits from the original deflate stream. From here on, the data to + append is simply compressed using deflate, and written to the gzip file. + When that is complete, the new CRC-32 and uncompressed length are written + as the trailer of the gzip file. + */ + +#include +#include +#include +#include +#include +#include "zlib.h" + +#define local static +#define LGCHUNK 14 +#define CHUNK (1U << LGCHUNK) +#define DSIZE 32768U + +/* print an error message and terminate with extreme prejudice */ +local void bye(char *msg1, char *msg2) +{ + fprintf(stderr, "gzappend error: %s%s\n", msg1, msg2); + exit(1); +} + +/* return the greatest common divisor of a and b using Euclid's algorithm, + modified to be fast when one argument much greater than the other, and + coded to avoid unnecessary swapping */ +local unsigned gcd(unsigned a, unsigned b) +{ + unsigned c; + + while (a && b) + if (a > b) { + c = b; + while (a - c >= c) + c <<= 1; + a -= c; + } + else { + c = a; + while (b - c >= c) + c <<= 1; + b -= c; + } + return a + b; +} + +/* rotate list[0..len-1] left by rot positions, in place */ +local void rotate(unsigned char *list, unsigned len, unsigned rot) +{ + unsigned char tmp; + unsigned cycles; + unsigned char *start, *last, *to, *from; + + /* normalize rot and handle degenerate cases */ + if (len < 2) return; + if (rot >= len) rot %= len; + if (rot == 0) return; + + /* pointer to last entry in list */ + last = list + (len - 1); + + /* do simple left shift by one */ + if (rot == 1) { + tmp = *list; + memcpy(list, list + 1, len - 1); + *last = tmp; + return; + } + + /* do simple right shift by one */ + if (rot == len - 1) { + tmp = *last; + memmove(list + 1, list, len - 1); + *list = tmp; + return; + } + + /* otherwise do rotate as a set of cycles in place */ + cycles = gcd(len, rot); /* number of cycles */ + do { + start = from = list + cycles; /* start index is arbitrary */ + tmp = *from; /* save entry to be overwritten */ + for (;;) { + to = from; /* next step in cycle */ + from += rot; /* go right rot positions */ + if (from > last) from -= len; /* (pointer better not wrap) */ + if (from == start) break; /* all but one shifted */ + *to = *from; /* shift left */ + } + *to = tmp; /* complete the circle */ + } while (--cycles); +} + +/* structure for gzip file read operations */ +typedef struct { + int fd; /* file descriptor */ + int size; /* 1 << size is bytes in buf */ + unsigned left; /* bytes available at next */ + unsigned char *buf; /* buffer */ + unsigned char *next; /* next byte in buffer */ + char *name; /* file name for error messages */ +} file; + +/* reload buffer */ +local int readin(file *in) +{ + int len; + + len = read(in->fd, in->buf, 1 << in->size); + if (len == -1) bye("error reading ", in->name); + in->left = (unsigned)len; + in->next = in->buf; + return len; +} + +/* read from file in, exit if end-of-file */ +local int readmore(file *in) +{ + if (readin(in) == 0) bye("unexpected end of ", in->name); + return 0; +} + +#define read1(in) (in->left == 0 ? readmore(in) : 0, \ + in->left--, *(in->next)++) + +/* skip over n bytes of in */ +local void skip(file *in, unsigned n) +{ + unsigned bypass; + + if (n > in->left) { + n -= in->left; + bypass = n & ~((1U << in->size) - 1); + if (bypass) { + if (lseek(in->fd, (off_t)bypass, SEEK_CUR) == -1) + bye("seeking ", in->name); + n -= bypass; + } + readmore(in); + if (n > in->left) + bye("unexpected end of ", in->name); + } + in->left -= n; + in->next += n; +} + +/* read a four-byte unsigned integer, little-endian, from in */ +unsigned long read4(file *in) +{ + unsigned long val; + + val = read1(in); + val += (unsigned)read1(in) << 8; + val += (unsigned long)read1(in) << 16; + val += (unsigned long)read1(in) << 24; + return val; +} + +/* skip over gzip header */ +local void gzheader(file *in) +{ + int flags; + unsigned n; + + if (read1(in) != 31 || read1(in) != 139) bye(in->name, " not a gzip file"); + if (read1(in) != 8) bye("unknown compression method in", in->name); + flags = read1(in); + if (flags & 0xe0) bye("unknown header flags set in", in->name); + skip(in, 6); + if (flags & 4) { + n = read1(in); + n += (unsigned)(read1(in)) << 8; + skip(in, n); + } + if (flags & 8) while (read1(in) != 0) ; + if (flags & 16) while (read1(in) != 0) ; + if (flags & 2) skip(in, 2); +} + +/* decompress gzip file "name", return strm with a deflate stream ready to + continue compression of the data in the gzip file, and return a file + descriptor pointing to where to write the compressed data -- the deflate + stream is initialized to compress using level "level" */ +local int gzscan(char *name, z_stream *strm, int level) +{ + int ret, lastbit, left, full; + unsigned have; + unsigned long crc, tot; + unsigned char *window; + off_t lastoff, end; + file gz; + + /* open gzip file */ + gz.name = name; + gz.fd = open(name, O_RDWR, 0); + if (gz.fd == -1) bye("cannot open ", name); + gz.buf = malloc(CHUNK); + if (gz.buf == NULL) bye("out of memory", ""); + gz.size = LGCHUNK; + gz.left = 0; + + /* skip gzip header */ + gzheader(&gz); + + /* prepare to decompress */ + window = malloc(DSIZE); + if (window == NULL) bye("out of memory", ""); + strm->zalloc = Z_NULL; + strm->zfree = Z_NULL; + strm->opaque = Z_NULL; + ret = inflateInit2(strm, -15); + if (ret != Z_OK) bye("out of memory", " or library mismatch"); + + /* decompress the deflate stream, saving append information */ + lastbit = 0; + lastoff = lseek(gz.fd, 0L, SEEK_CUR) - gz.left; + left = 0; + strm->avail_in = gz.left; + strm->next_in = gz.next; + crc = crc32(0L, Z_NULL, 0); + have = full = 0; + do { + /* if needed, get more input */ + if (strm->avail_in == 0) { + readmore(&gz); + strm->avail_in = gz.left; + strm->next_in = gz.next; + } + + /* set up output to next available section of sliding window */ + strm->avail_out = DSIZE - have; + strm->next_out = window + have; + + /* inflate and check for errors */ + ret = inflate(strm, Z_BLOCK); + if (ret == Z_STREAM_ERROR) bye("internal stream error!", ""); + if (ret == Z_MEM_ERROR) bye("out of memory", ""); + if (ret == Z_DATA_ERROR) + bye("invalid compressed data--format violated in", name); + + /* update crc and sliding window pointer */ + crc = crc32(crc, window + have, DSIZE - have - strm->avail_out); + if (strm->avail_out) + have = DSIZE - strm->avail_out; + else { + have = 0; + full = 1; + } + + /* process end of block */ + if (strm->data_type & 128) { + if (strm->data_type & 64) + left = strm->data_type & 0x1f; + else { + lastbit = strm->data_type & 0x1f; + lastoff = lseek(gz.fd, 0L, SEEK_CUR) - strm->avail_in; + } + } + } while (ret != Z_STREAM_END); + inflateEnd(strm); + gz.left = strm->avail_in; + gz.next = strm->next_in; + + /* save the location of the end of the compressed data */ + end = lseek(gz.fd, 0L, SEEK_CUR) - gz.left; + + /* check gzip trailer and save total for deflate */ + if (crc != read4(&gz)) + bye("invalid compressed data--crc mismatch in ", name); + tot = strm->total_out; + if ((tot & 0xffffffffUL) != read4(&gz)) + bye("invalid compressed data--length mismatch in", name); + + /* if not at end of file, warn */ + if (gz.left || readin(&gz)) + fprintf(stderr, + "gzappend warning: junk at end of gzip file overwritten\n"); + + /* clear last block bit */ + lseek(gz.fd, lastoff - (lastbit != 0), SEEK_SET); + if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name); + *gz.buf = (unsigned char)(*gz.buf ^ (1 << ((8 - lastbit) & 7))); + lseek(gz.fd, -1L, SEEK_CUR); + if (write(gz.fd, gz.buf, 1) != 1) bye("writing after seek to ", name); + + /* if window wrapped, build dictionary from window by rotating */ + if (full) { + rotate(window, DSIZE, have); + have = DSIZE; + } + + /* set up deflate stream with window, crc, total_in, and leftover bits */ + ret = deflateInit2(strm, level, Z_DEFLATED, -15, 8, Z_DEFAULT_STRATEGY); + if (ret != Z_OK) bye("out of memory", ""); + deflateSetDictionary(strm, window, have); + strm->adler = crc; + strm->total_in = tot; + if (left) { + lseek(gz.fd, --end, SEEK_SET); + if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name); + deflatePrime(strm, 8 - left, *gz.buf); + } + lseek(gz.fd, end, SEEK_SET); + + /* clean up and return */ + free(window); + free(gz.buf); + return gz.fd; +} + +/* append file "name" to gzip file gd using deflate stream strm -- if last + is true, then finish off the deflate stream at the end */ +local void gztack(char *name, int gd, z_stream *strm, int last) +{ + int fd, len, ret; + unsigned left; + unsigned char *in, *out; + + /* open file to compress and append */ + fd = 0; + if (name != NULL) { + fd = open(name, O_RDONLY, 0); + if (fd == -1) + fprintf(stderr, "gzappend warning: %s not found, skipping ...\n", + name); + } + + /* allocate buffers */ + in = fd == -1 ? NULL : malloc(CHUNK); + out = malloc(CHUNK); + if (out == NULL) bye("out of memory", ""); + + /* compress input file and append to gzip file */ + do { + /* get more input */ + len = fd == -1 ? 0 : read(fd, in, CHUNK); + if (len == -1) { + fprintf(stderr, + "gzappend warning: error reading %s, skipping rest ...\n", + name); + len = 0; + } + strm->avail_in = (unsigned)len; + strm->next_in = in; + if (len) strm->adler = crc32(strm->adler, in, (unsigned)len); + + /* compress and write all available output */ + do { + strm->avail_out = CHUNK; + strm->next_out = out; + ret = deflate(strm, last && len == 0 ? Z_FINISH : Z_NO_FLUSH); + left = CHUNK - strm->avail_out; + while (left) { + len = write(gd, out + CHUNK - strm->avail_out - left, left); + if (len == -1) bye("writing gzip file", ""); + left -= (unsigned)len; + } + } while (strm->avail_out == 0 && ret != Z_STREAM_END); + } while (len != 0); + + /* write trailer after last entry */ + if (last) { + deflateEnd(strm); + out[0] = (unsigned char)(strm->adler); + out[1] = (unsigned char)(strm->adler >> 8); + out[2] = (unsigned char)(strm->adler >> 16); + out[3] = (unsigned char)(strm->adler >> 24); + out[4] = (unsigned char)(strm->total_in); + out[5] = (unsigned char)(strm->total_in >> 8); + out[6] = (unsigned char)(strm->total_in >> 16); + out[7] = (unsigned char)(strm->total_in >> 24); + len = 8; + do { + ret = write(gd, out + 8 - len, len); + if (ret == -1) bye("writing gzip file", ""); + len -= ret; + } while (len); + close(gd); + } + + /* clean up and return */ + free(out); + if (in != NULL) free(in); + if (fd > 0) close(fd); +} + +/* process the compression level option if present, scan the gzip file, and + append the specified files, or append the data from stdin if no other file + names are provided on the command line -- the gzip file must be writable + and seekable */ +int main(int argc, char **argv) +{ + int gd, level; + z_stream strm; + + /* ignore command name */ + argv++; + + /* provide usage if no arguments */ + if (*argv == NULL) { + printf("gzappend 1.1 (4 Nov 2003) Copyright (C) 2003 Mark Adler\n"); + printf( + "usage: gzappend [-level] file.gz [ addthis [ andthis ... ]]\n"); + return 0; + } + + /* set compression level */ + level = Z_DEFAULT_COMPRESSION; + if (argv[0][0] == '-') { + if (argv[0][1] < '0' || argv[0][1] > '9' || argv[0][2] != 0) + bye("invalid compression level", ""); + level = argv[0][1] - '0'; + if (*++argv == NULL) bye("no gzip file name after options", ""); + } + + /* prepare to append to gzip file */ + gd = gzscan(*argv++, &strm, level); + + /* append files on command line, or from stdin if none */ + if (*argv == NULL) + gztack(NULL, gd, &strm, 1); + else + do { + gztack(*argv, gd, &strm, argv[1] == NULL); + } while (*++argv != NULL); + return 0; +} diff --git a/common/dist/zlib/examples/gzjoin.c b/common/dist/zlib/examples/gzjoin.c new file mode 100644 index 000000000..bbc17cf41 --- /dev/null +++ b/common/dist/zlib/examples/gzjoin.c @@ -0,0 +1,450 @@ +/* $NetBSD: gzjoin.c,v 1.1.1.1 2006/01/14 20:11:09 christos Exp $ */ + +/* gzjoin -- command to join gzip files into one gzip file + + Copyright (C) 2004 Mark Adler, all rights reserved + version 1.0, 11 Dec 2004 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + +/* + * Change history: + * + * 1.0 11 Dec 2004 - First version + * 1.1 12 Jun 2005 - Changed ssize_t to long for portability + */ + +/* + gzjoin takes one or more gzip files on the command line and writes out a + single gzip file that will uncompress to the concatenation of the + uncompressed data from the individual gzip files. gzjoin does this without + having to recompress any of the data and without having to calculate a new + crc32 for the concatenated uncompressed data. gzjoin does however have to + decompress all of the input data in order to find the bits in the compressed + data that need to be modified to concatenate the streams. + + gzjoin does not do an integrity check on the input gzip files other than + checking the gzip header and decompressing the compressed data. They are + otherwise assumed to be complete and correct. + + Each joint between gzip files removes at least 18 bytes of previous trailer + and subsequent header, and inserts an average of about three bytes to the + compressed data in order to connect the streams. The output gzip file + has a minimal ten-byte gzip header with no file name or modification time. + + This program was written to illustrate the use of the Z_BLOCK option of + inflate() and the crc32_combine() function. gzjoin will not compile with + versions of zlib earlier than 1.2.3. + */ + +#include /* fputs(), fprintf(), fwrite(), putc() */ +#include /* exit(), malloc(), free() */ +#include /* open() */ +#include /* close(), read(), lseek() */ +#include "zlib.h" + /* crc32(), crc32_combine(), inflateInit2(), inflate(), inflateEnd() */ + +#define local static + +/* exit with an error (return a value to allow use in an expression) */ +local int bail(char *why1, char *why2) +{ + fprintf(stderr, "gzjoin error: %s%s, output incomplete\n", why1, why2); + exit(1); + return 0; +} + +/* -- simple buffered file input with access to the buffer -- */ + +#define CHUNK 32768 /* must be a power of two and fit in unsigned */ + +/* bin buffered input file type */ +typedef struct { + char *name; /* name of file for error messages */ + int fd; /* file descriptor */ + unsigned left; /* bytes remaining at next */ + unsigned char *next; /* next byte to read */ + unsigned char *buf; /* allocated buffer of length CHUNK */ +} bin; + +/* close a buffered file and free allocated memory */ +local void bclose(bin *in) +{ + if (in != NULL) { + if (in->fd != -1) + close(in->fd); + if (in->buf != NULL) + free(in->buf); + free(in); + } +} + +/* open a buffered file for input, return a pointer to type bin, or NULL on + failure */ +local bin *bopen(char *name) +{ + bin *in; + + in = malloc(sizeof(bin)); + if (in == NULL) + return NULL; + in->buf = malloc(CHUNK); + in->fd = open(name, O_RDONLY, 0); + if (in->buf == NULL || in->fd == -1) { + bclose(in); + return NULL; + } + in->left = 0; + in->next = in->buf; + in->name = name; + return in; +} + +/* load buffer from file, return -1 on read error, 0 or 1 on success, with + 1 indicating that end-of-file was reached */ +local int bload(bin *in) +{ + long len; + + if (in == NULL) + return -1; + if (in->left != 0) + return 0; + in->next = in->buf; + do { + len = (long)read(in->fd, in->buf + in->left, CHUNK - in->left); + if (len < 0) + return -1; + in->left += (unsigned)len; + } while (len != 0 && in->left < CHUNK); + return len == 0 ? 1 : 0; +} + +/* get a byte from the file, bail if end of file */ +#define bget(in) (in->left ? 0 : bload(in), \ + in->left ? (in->left--, *(in->next)++) : \ + bail("unexpected end of file on ", in->name)) + +/* get a four-byte little-endian unsigned integer from file */ +local unsigned long bget4(bin *in) +{ + unsigned long val; + + val = bget(in); + val += (unsigned long)(bget(in)) << 8; + val += (unsigned long)(bget(in)) << 16; + val += (unsigned long)(bget(in)) << 24; + return val; +} + +/* skip bytes in file */ +local void bskip(bin *in, unsigned skip) +{ + /* check pointer */ + if (in == NULL) + return; + + /* easy case -- skip bytes in buffer */ + if (skip <= in->left) { + in->left -= skip; + in->next += skip; + return; + } + + /* skip what's in buffer, discard buffer contents */ + skip -= in->left; + in->left = 0; + + /* seek past multiples of CHUNK bytes */ + if (skip > CHUNK) { + unsigned left; + + left = skip & (CHUNK - 1); + if (left == 0) { + /* exact number of chunks: seek all the way minus one byte to check + for end-of-file with a read */ + lseek(in->fd, skip - 1, SEEK_CUR); + if (read(in->fd, in->buf, 1) != 1) + bail("unexpected end of file on ", in->name); + return; + } + + /* skip the integral chunks, update skip with remainder */ + lseek(in->fd, skip - left, SEEK_CUR); + skip = left; + } + + /* read more input and skip remainder */ + bload(in); + if (skip > in->left) + bail("unexpected end of file on ", in->name); + in->left -= skip; + in->next += skip; +} + +/* -- end of buffered input functions -- */ + +/* skip the gzip header from file in */ +local void gzhead(bin *in) +{ + int flags; + + /* verify gzip magic header and compression method */ + if (bget(in) != 0x1f || bget(in) != 0x8b || bget(in) != 8) + bail(in->name, " is not a valid gzip file"); + + /* get and verify flags */ + flags = bget(in); + if ((flags & 0xe0) != 0) + bail("unknown reserved bits set in ", in->name); + + /* skip modification time, extra flags, and os */ + bskip(in, 6); + + /* skip extra field if present */ + if (flags & 4) { + unsigned len; + + len = bget(in); + len += (unsigned)(bget(in)) << 8; + bskip(in, len); + } + + /* skip file name if present */ + if (flags & 8) + while (bget(in) != 0) + ; + + /* skip comment if present */ + if (flags & 16) + while (bget(in) != 0) + ; + + /* skip header crc if present */ + if (flags & 2) + bskip(in, 2); +} + +/* write a four-byte little-endian unsigned integer to out */ +local void put4(unsigned long val, FILE *out) +{ + putc(val & 0xff, out); + putc((val >> 8) & 0xff, out); + putc((val >> 16) & 0xff, out); + putc((val >> 24) & 0xff, out); +} + +/* Load up zlib stream from buffered input, bail if end of file */ +local void zpull(z_streamp strm, bin *in) +{ + if (in->left == 0) + bload(in); + if (in->left == 0) + bail("unexpected end of file on ", in->name); + strm->avail_in = in->left; + strm->next_in = in->next; +} + +/* Write header for gzip file to out and initialize trailer. */ +local void gzinit(unsigned long *crc, unsigned long *tot, FILE *out) +{ + fwrite("\x1f\x8b\x08\0\0\0\0\0\0\xff", 1, 10, out); + *crc = crc32(0L, Z_NULL, 0); + *tot = 0; +} + +/* Copy the compressed data from name, zeroing the last block bit of the last + block if clr is true, and adding empty blocks as needed to get to a byte + boundary. If clr is false, then the last block becomes the last block of + the output, and the gzip trailer is written. crc and tot maintains the + crc and length (modulo 2^32) of the output for the trailer. The resulting + gzip file is written to out. gzinit() must be called before the first call + of gzcopy() to write the gzip header and to initialize crc and tot. */ +local void gzcopy(char *name, int clr, unsigned long *crc, unsigned long *tot, + FILE *out) +{ + int ret; /* return value from zlib functions */ + int pos; /* where the "last block" bit is in byte */ + int last; /* true if processing the last block */ + bin *in; /* buffered input file */ + unsigned char *start; /* start of compressed data in buffer */ + unsigned char *junk; /* buffer for uncompressed data -- discarded */ + z_off_t len; /* length of uncompressed data (support > 4 GB) */ + z_stream strm; /* zlib inflate stream */ + + /* open gzip file and skip header */ + in = bopen(name); + if (in == NULL) + bail("could not open ", name); + gzhead(in); + + /* allocate buffer for uncompressed data and initialize raw inflate + stream */ + junk = malloc(CHUNK); + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, -15); + if (junk == NULL || ret != Z_OK) + bail("out of memory", ""); + + /* inflate and copy compressed data, clear last-block bit if requested */ + len = 0; + zpull(&strm, in); + start = strm.next_in; + last = start[0] & 1; + if (last && clr) + start[0] &= ~1; + strm.avail_out = 0; + for (;;) { + /* if input used and output done, write used input and get more */ + if (strm.avail_in == 0 && strm.avail_out != 0) { + fwrite(start, 1, strm.next_in - start, out); + start = in->buf; + in->left = 0; + zpull(&strm, in); + } + + /* decompress -- return early when end-of-block reached */ + strm.avail_out = CHUNK; + strm.next_out = junk; + ret = inflate(&strm, Z_BLOCK); + switch (ret) { + case Z_MEM_ERROR: + bail("out of memory", ""); + case Z_DATA_ERROR: + bail("invalid compressed data in ", in->name); + } + + /* update length of uncompressed data */ + len += CHUNK - strm.avail_out; + + /* check for block boundary (only get this when block copied out) */ + if (strm.data_type & 128) { + /* if that was the last block, then done */ + if (last) + break; + + /* number of unused bits in last byte */ + pos = strm.data_type & 7; + + /* find the next last-block bit */ + if (pos != 0) { + /* next last-block bit is in last used byte */ + pos = 0x100 >> pos; + last = strm.next_in[-1] & pos; + if (last && clr) + strm.next_in[-1] &= ~pos; + } + else { + /* next last-block bit is in next unused byte */ + if (strm.avail_in == 0) { + /* don't have that byte yet -- get it */ + fwrite(start, 1, strm.next_in - start, out); + start = in->buf; + in->left = 0; + zpull(&strm, in); + } + last = strm.next_in[0] & 1; + if (last && clr) + strm.next_in[0] &= ~1; + } + } + } + + /* update buffer with unused input */ + in->left = strm.avail_in; + in->next = strm.next_in; + + /* copy used input, write empty blocks to get to byte boundary */ + pos = strm.data_type & 7; + fwrite(start, 1, in->next - start - 1, out); + last = in->next[-1]; + if (pos == 0 || !clr) + /* already at byte boundary, or last file: write last byte */ + putc(last, out); + else { + /* append empty blocks to last byte */ + last &= ((0x100 >> pos) - 1); /* assure unused bits are zero */ + if (pos & 1) { + /* odd -- append an empty stored block */ + putc(last, out); + if (pos == 1) + putc(0, out); /* two more bits in block header */ + fwrite("\0\0\xff\xff", 1, 4, out); + } + else { + /* even -- append 1, 2, or 3 empty fixed blocks */ + switch (pos) { + case 6: + putc(last | 8, out); + last = 0; + case 4: + putc(last | 0x20, out); + last = 0; + case 2: + putc(last | 0x80, out); + putc(0, out); + } + } + } + + /* update crc and tot */ + *crc = crc32_combine(*crc, bget4(in), len); + *tot += (unsigned long)len; + + /* clean up */ + inflateEnd(&strm); + free(junk); + bclose(in); + + /* write trailer if this is the last gzip file */ + if (!clr) { + put4(*crc, out); + put4(*tot, out); + } +} + +/* join the gzip files on the command line, write result to stdout */ +int main(int argc, char **argv) +{ + unsigned long crc, tot; /* running crc and total uncompressed length */ + + /* skip command name */ + argc--; + argv++; + + /* show usage if no arguments */ + if (argc == 0) { + fputs("gzjoin usage: gzjoin f1.gz [f2.gz [f3.gz ...]] > fjoin.gz\n", + stderr); + return 0; + } + + /* join gzip files on command line and write to stdout */ + gzinit(&crc, &tot, stdout); + while (argc--) + gzcopy(*argv++, argc, &crc, &tot, stdout); + + /* done */ + return 0; +} diff --git a/common/dist/zlib/examples/gzlog.c b/common/dist/zlib/examples/gzlog.c new file mode 100644 index 000000000..92c5c40f2 --- /dev/null +++ b/common/dist/zlib/examples/gzlog.c @@ -0,0 +1,415 @@ +/* $NetBSD: gzlog.c,v 1.1.1.1 2006/01/14 20:11:09 christos Exp $ */ + +/* + * gzlog.c + * Copyright (C) 2004 Mark Adler + * For conditions of distribution and use, see copyright notice in gzlog.h + * version 1.0, 26 Nov 2004 + * + */ + +#include /* memcmp() */ +#include /* malloc(), free(), NULL */ +#include /* size_t, off_t */ +#include /* read(), close(), sleep(), ftruncate(), */ + /* lseek() */ +#include /* open() */ +#include /* flock() */ +#include "zlib.h" /* deflateInit2(), deflate(), deflateEnd() */ + +#include "gzlog.h" /* interface */ +#define local static + +/* log object structure */ +typedef struct { + int id; /* object identifier */ + int fd; /* log file descriptor */ + off_t extra; /* offset of extra "ap" subfield */ + off_t mark_off; /* offset of marked data */ + off_t last_off; /* offset of last block */ + unsigned long crc; /* uncompressed crc */ + unsigned long len; /* uncompressed length (modulo 2^32) */ + unsigned stored; /* length of current stored block */ +} gz_log; + +#define GZLOGID 19334 /* gz_log object identifier */ + +#define LOCK_RETRY 1 /* retry lock once a second */ +#define LOCK_PATIENCE 1200 /* try about twenty minutes before forcing */ + +/* acquire a lock on a file */ +local int lock(int fd) +{ + int patience; + + /* try to lock every LOCK_RETRY seconds for LOCK_PATIENCE seconds */ + patience = LOCK_PATIENCE; + do { + if (flock(fd, LOCK_EX + LOCK_NB) == 0) + return 0; + (void)sleep(LOCK_RETRY); + patience -= LOCK_RETRY; + } while (patience > 0); + + /* we've run out of patience -- give up */ + return -1; +} + +/* release lock */ +local void unlock(int fd) +{ + (void)flock(fd, LOCK_UN); +} + +/* release a log object */ +local void log_clean(gz_log *log) +{ + unlock(log->fd); + (void)close(log->fd); + free(log); +} + +/* read an unsigned long from a byte buffer little-endian */ +local unsigned long make_ulg(unsigned char *buf) +{ + int n; + unsigned long val; + + val = (unsigned long)(*buf++); + for (n = 8; n < 32; n += 8) + val += (unsigned long)(*buf++) << n; + return val; +} + +/* read an off_t from a byte buffer little-endian */ +local off_t make_off(unsigned char *buf) +{ + int n; + off_t val; + + val = (off_t)(*buf++); + for (n = 8; n < 64; n += 8) + val += (off_t)(*buf++) << n; + return val; +} + +/* write an unsigned long little-endian to byte buffer */ +local void dice_ulg(unsigned long val, unsigned char *buf) +{ + int n; + + for (n = 0; n < 4; n++) { + *buf++ = val & 0xff; + val >>= 8; + } +} + +/* write an off_t little-endian to byte buffer */ +local void dice_off(off_t val, unsigned char *buf) +{ + int n; + + for (n = 0; n < 8; n++) { + *buf++ = val & 0xff; + val >>= 8; + } +} + +/* initial, empty gzip file for appending */ +local char empty_gz[] = { + 0x1f, 0x8b, /* magic gzip id */ + 8, /* compression method is deflate */ + 4, /* there is an extra field */ + 0, 0, 0, 0, /* no modification time provided */ + 0, 0xff, /* no extra flags, no OS */ + 20, 0, 'a', 'p', 16, 0, /* extra field with "ap" subfield */ + 32, 0, 0, 0, 0, 0, 0, 0, /* offset of uncompressed data */ + 32, 0, 0, 0, 0, 0, 0, 0, /* offset of last block */ + 1, 0, 0, 0xff, 0xff, /* empty stored block (last) */ + 0, 0, 0, 0, /* crc */ + 0, 0, 0, 0 /* uncompressed length */ +}; + +/* initialize a log object with locking */ +void *gzlog_open(char *path) +{ + unsigned xlen; + unsigned char temp[20]; + unsigned sub_len; + int good; + gz_log *log; + + /* allocate log structure */ + log = malloc(sizeof(gz_log)); + if (log == NULL) + return NULL; + log->id = GZLOGID; + + /* open file, creating it if necessary, and locking it */ + log->fd = open(path, O_RDWR | O_CREAT, 0600); + if (log->fd < 0) { + free(log); + return NULL; + } + if (lock(log->fd)) { + close(log->fd); + free(log); + return NULL; + } + + /* if file is empty, write new gzip stream */ + if (lseek(log->fd, 0, SEEK_END) == 0) { + if (write(log->fd, empty_gz, sizeof(empty_gz)) != sizeof(empty_gz)) { + log_clean(log); + return NULL; + } + } + + /* check gzip header */ + (void)lseek(log->fd, 0, SEEK_SET); + if (read(log->fd, temp, 12) != 12 || temp[0] != 0x1f || + temp[1] != 0x8b || temp[2] != 8 || (temp[3] & 4) == 0) { + log_clean(log); + return NULL; + } + + /* process extra field to find "ap" sub-field */ + xlen = temp[10] + (temp[11] << 8); + good = 0; + while (xlen) { + if (xlen < 4 || read(log->fd, temp, 4) != 4) + break; + sub_len = temp[2]; + sub_len += temp[3] << 8; + xlen -= 4; + if (memcmp(temp, "ap", 2) == 0 && sub_len == 16) { + good = 1; + break; + } + if (xlen < sub_len) + break; + (void)lseek(log->fd, sub_len, SEEK_CUR); + xlen -= sub_len; + } + if (!good) { + log_clean(log); + return NULL; + } + + /* read in "ap" sub-field */ + log->extra = lseek(log->fd, 0, SEEK_CUR); + if (read(log->fd, temp, 16) != 16) { + log_clean(log); + return NULL; + } + log->mark_off = make_off(temp); + log->last_off = make_off(temp + 8); + + /* get crc, length of gzip file */ + (void)lseek(log->fd, log->last_off, SEEK_SET); + if (read(log->fd, temp, 13) != 13 || + memcmp(temp, "\001\000\000\377\377", 5) != 0) { + log_clean(log); + return NULL; + } + log->crc = make_ulg(temp + 5); + log->len = make_ulg(temp + 9); + + /* set up to write over empty last block */ + (void)lseek(log->fd, log->last_off + 5, SEEK_SET); + log->stored = 0; + return (void *)log; +} + +/* maximum amount to put in a stored block before starting a new one */ +#define MAX_BLOCK 16384 + +/* write a block to a log object */ +int gzlog_write(void *obj, char *data, size_t len) +{ + size_t some; + unsigned char temp[5]; + gz_log *log; + + /* check object */ + log = (gz_log *)obj; + if (log == NULL || log->id != GZLOGID) + return 1; + + /* write stored blocks until all of the input is written */ + do { + some = MAX_BLOCK - log->stored; + if (some > len) + some = len; + if (write(log->fd, data, some) != some) + return 1; + log->crc = crc32(log->crc, data, some); + log->len += some; + len -= some; + data += some; + log->stored += some; + + /* if the stored block is full, end it and start another */ + if (log->stored == MAX_BLOCK) { + (void)lseek(log->fd, log->last_off, SEEK_SET); + temp[0] = 0; + dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16), + temp + 1); + if (write(log->fd, temp, 5) != 5) + return 1; + log->last_off = lseek(log->fd, log->stored, SEEK_CUR); + (void)lseek(log->fd, 5, SEEK_CUR); + log->stored = 0; + } + } while (len); + return 0; +} + +/* recompress the remaining stored deflate data in place */ +local int recomp(gz_log *log) +{ + z_stream strm; + size_t len, max; + unsigned char *in; + unsigned char *out; + unsigned char temp[16]; + + /* allocate space and read it all in (it's around 1 MB) */ + len = log->last_off - log->mark_off; + max = len + (len >> 12) + (len >> 14) + 11; + out = malloc(max); + if (out == NULL) + return 1; + in = malloc(len); + if (in == NULL) { + free(out); + return 1; + } + (void)lseek(log->fd, log->mark_off, SEEK_SET); + if (read(log->fd, in, len) != len) { + free(in); + free(out); + return 1; + } + + /* recompress in memory, decoding stored data as we go */ + /* note: this assumes that unsigned is four bytes or more */ + /* consider not making that assumption */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + if (deflateInit2(&strm, Z_BEST_COMPRESSION, Z_DEFLATED, -15, 8, + Z_DEFAULT_STRATEGY) != Z_OK) { + free(in); + free(out); + return 1; + } + strm.next_in = in; + strm.avail_out = max; + strm.next_out = out; + while (len >= 5) { + if (strm.next_in[0] != 0) + break; + strm.avail_in = strm.next_in[1] + (strm.next_in[2] << 8); + strm.next_in += 5; + len -= 5; + if (strm.avail_in != 0) { + if (len < strm.avail_in) + break; + len -= strm.avail_in; + (void)deflate(&strm, Z_NO_FLUSH); + if (strm.avail_in != 0 || strm.avail_out == 0) + break; + } + } + (void)deflate(&strm, Z_SYNC_FLUSH); + (void)deflateEnd(&strm); + free(in); + if (len != 0 || strm.avail_out == 0) { + free(out); + return 1; + } + + /* overwrite stored data with compressed data */ + (void)lseek(log->fd, log->mark_off, SEEK_SET); + len = max - strm.avail_out; + if (write(log->fd, out, len) != len) { + free(out); + return 1; + } + free(out); + + /* write last empty block, crc, and length */ + log->mark_off = log->last_off = lseek(log->fd, 0, SEEK_CUR); + temp[0] = 1; + dice_ulg(0xffffL << 16, temp + 1); + dice_ulg(log->crc, temp + 5); + dice_ulg(log->len, temp + 9); + if (write(log->fd, temp, 13) != 13) + return 1; + + /* truncate file to discard remaining stored data and old trailer */ + ftruncate(log->fd, lseek(log->fd, 0, SEEK_CUR)); + + /* update extra field to point to new last empty block */ + (void)lseek(log->fd, log->extra, SEEK_SET); + dice_off(log->mark_off, temp); + dice_off(log->last_off, temp + 8); + if (write(log->fd, temp, 16) != 16) + return 1; + return 0; +} + +/* maximum accumulation of stored blocks before compressing */ +#define MAX_STORED 1048576 + +/* close log object */ +int gzlog_close(void *obj) +{ + unsigned char temp[8]; + gz_log *log; + + /* check object */ + log = (gz_log *)obj; + if (log == NULL || log->id != GZLOGID) + return 1; + + /* go to start of most recent block being written */ + (void)lseek(log->fd, log->last_off, SEEK_SET); + + /* if some stuff was put there, update block */ + if (log->stored) { + temp[0] = 0; + dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16), + temp + 1); + if (write(log->fd, temp, 5) != 5) + return 1; + log->last_off = lseek(log->fd, log->stored, SEEK_CUR); + } + + /* write last block (empty) */ + if (write(log->fd, "\001\000\000\377\377", 5) != 5) + return 1; + + /* write updated crc and uncompressed length */ + dice_ulg(log->crc, temp); + dice_ulg(log->len, temp + 4); + if (write(log->fd, temp, 8) != 8) + return 1; + + /* put offset of that last block in gzip extra block */ + (void)lseek(log->fd, log->extra + 8, SEEK_SET); + dice_off(log->last_off, temp); + if (write(log->fd, temp, 8) != 8) + return 1; + + /* if more than 1 MB stored, then time to compress it */ + if (log->last_off - log->mark_off > MAX_STORED) { + if (recomp(log)) + return 1; + } + + /* unlock and close file */ + log_clean(log); + return 0; +} diff --git a/common/dist/zlib/examples/gzlog.h b/common/dist/zlib/examples/gzlog.h new file mode 100644 index 000000000..fa2e312ff --- /dev/null +++ b/common/dist/zlib/examples/gzlog.h @@ -0,0 +1,60 @@ +/* $NetBSD: gzlog.h,v 1.1.1.1 2006/01/14 20:11:09 christos Exp $ */ + +/* gzlog.h + Copyright (C) 2004 Mark Adler, all rights reserved + version 1.0, 26 Nov 2004 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + +/* + The gzlog object allows writing short messages to a gzipped log file, + opening the log file locked for small bursts, and then closing it. The log + object works by appending stored data to the gzip file until 1 MB has been + accumulated. At that time, the stored data is compressed, and replaces the + uncompressed data in the file. The log file is truncated to its new size at + that time. After closing, the log file is always valid gzip file that can + decompressed to recover what was written. + + A gzip header "extra" field contains two file offsets for appending. The + first points to just after the last compressed data. The second points to + the last stored block in the deflate stream, which is empty. All of the + data between those pointers is uncompressed. + */ + +/* Open a gzlog object, creating the log file if it does not exist. Return + NULL on error. Note that gzlog_open() could take a long time to return if + there is difficulty in locking the file. */ +void *gzlog_open(char *path); + +/* Write to a gzlog object. Return non-zero on error. This function will + simply write data to the file uncompressed. Compression of the data + will not occur until gzlog_close() is called. It is expected that + gzlog_write() is used for a short message, and then gzlog_close() is + called. If a large amount of data is to be written, then the application + should write no more than 1 MB at a time with gzlog_write() before + calling gzlog_close() and then gzlog_open() again. */ +int gzlog_write(void *log, char *data, size_t len); + +/* Close a gzlog object. Return non-zero on error. The log file is locked + until this function is called. This function will compress stored data + at the end of the gzip file if at least 1 MB has been accumulated. Note + that the file will not be a valid gzip file until this function completes. + */ +int gzlog_close(void *log); diff --git a/common/dist/zlib/examples/zlib_how.html b/common/dist/zlib/examples/zlib_how.html new file mode 100644 index 000000000..40998dbf0 --- /dev/null +++ b/common/dist/zlib/examples/zlib_how.html @@ -0,0 +1,523 @@ + + + + +zlib Usage Example + + + +

zlib Usage Example

+We often get questions about how the deflate() and inflate() functions should be used. +Users wonder when they should provide more input, when they should use more output, +what to do with a Z_BUF_ERROR, how to make sure the process terminates properly, and +so on. So for those who have read zlib.h (a few times), and +would like further edification, below is an annotated example in C of simple routines to compress and decompress +from an input file to an output file using deflate() and inflate() respectively. The +annotations are interspersed between lines of the code. So please read between the lines. +We hope this helps explain some of the intricacies of zlib. +

+Without further adieu, here is the program zpipe.c: +


+/* zpipe.c: example of proper use of zlib's inflate() and deflate()
+   Not copyrighted -- provided to the public domain
+   Version 1.2  9 November 2004  Mark Adler */
+
+/* Version history:
+   1.0  30 Oct 2004  First version
+   1.1   8 Nov 2004  Add void casting for unused return values
+                     Use switch statement for inflate() return values
+   1.2   9 Nov 2004  Add assertions to document zlib guarantees
+ */
+
+We now include the header files for the required definitions. From +stdio.h we use fopen(), fread(), fwrite(), +feof(), ferror(), and fclose() for file i/o, and +fputs() for error messages. From string.h we use +strcmp() for command line argument processing. +From assert.h we use the assert() macro. +From zlib.h +we use the basic compression functions deflateInit(), +deflate(), and deflateEnd(), and the basic decompression +functions inflateInit(), inflate(), and +inflateEnd(). +

+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+
+CHUNK is simply the buffer size for feeding data to and pulling data +from the zlib routines. Larger buffer sizes would be more efficient, +especially for inflate(). If the memory is available, buffers sizes +on the order of 128K or 256K bytes should be used. +

+#define CHUNK 16384
+
+The def() routine compresses data from an input file to an output file. The output data +will be in the zlib format, which is different from the gzip or zip +formats. The zlib format has a very small header of only two bytes to identify it as +a zlib stream and to provide decoding information, and a four-byte trailer with a fast +check value to verify the integrity of the uncompressed data after decoding. +

+/* Compress from file source to file dest until EOF on source.
+   def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_STREAM_ERROR if an invalid compression
+   level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
+   version of the library linked do not match, or Z_ERRNO if there is
+   an error reading or writing the files. */
+int def(FILE *source, FILE *dest, int level)
+{
+
+Here are the local variables for def(). ret will be used for zlib +return codes. flush will keep track of the current flushing state for deflate(), +which is either no flushing, or flush to completion after the end of the input file is reached. +have is the amount of data returned from deflate(). The strm structure +is used to pass information to and from the zlib routines, and to maintain the +deflate() state. in and out are the input and output buffers for +deflate(). +

+    int ret, flush;
+    unsigned have;
+    z_stream strm;
+    char in[CHUNK];
+    char out[CHUNK];
+
+The first thing we do is to initialize the zlib state for compression using +deflateInit(). This must be done before the first use of deflate(). +The zalloc, zfree, and opaque fields in the strm +structure must be initialized before calling deflateInit(). Here they are +set to the zlib constant Z_NULL to request that zlib use +the default memory allocation routines. An application may also choose to provide +custom memory allocation routines here. deflateInit() will allocate on the +order of 256K bytes for the internal state. +(See zlib Technical Details.) +

+deflateInit() is called with a pointer to the structure to be initialized and +the compression level, which is an integer in the range of -1 to 9. Lower compression +levels result in faster execution, but less compression. Higher levels result in +greater compression, but slower execution. The zlib constant Z_DEFAULT_COMPRESSION, +equal to -1, +provides a good compromise between compression and speed and is equivalent to level 6. +Level 0 actually does no compression at all, and in fact expands the data slightly to produce +the zlib format (it is not a byte-for-byte copy of the input). +More advanced applications of zlib +may use deflateInit2() here instead. Such an application may want to reduce how +much memory will be used, at some price in compression. Or it may need to request a +gzip header and trailer instead of a zlib header and trailer, or raw +encoding with no header or trailer at all. +

+We must check the return value of deflateInit() against the zlib constant +Z_OK to make sure that it was able to +allocate memory for the internal state, and that the provided arguments were valid. +deflateInit() will also check that the version of zlib that the zlib.h +file came from matches the version of zlib actually linked with the program. This +is especially important for environments in which zlib is a shared library. +

+Note that an application can initialize multiple, independent zlib streams, which can +operate in parallel. The state information maintained in the structure allows the zlib +routines to be reentrant. +


+    /* allocate deflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    ret = deflateInit(&strm, level);
+    if (ret != Z_OK)
+        return ret;
+
+With the pleasantries out of the way, now we can get down to business. The outer do-loop +reads all of the input file and exits at the bottom of the loop once end-of-file is reached. +This loop contains the only call of deflate(). So we must make sure that all of the +input data has been processed and that all of the output data has been generated and consumed +before we fall out of the loop at the bottom. +

+    /* compress until end of file */
+    do {
+
+We start off by reading data from the input file. The number of bytes read is put directly +into avail_in, and a pointer to those bytes is put into next_in. We also +check to see if end-of-file on the input has been reached. If we are at the end of file, then flush is set to the +zlib constant Z_FINISH, which is later passed to deflate() to +indicate that this is the last chunk of input data to compress. We need to use feof() +to check for end-of-file as opposed to seeing if fewer than CHUNK bytes have been read. The +reason is that if the input file length is an exact multiple of CHUNK, we will miss +the fact that we got to the end-of-file, and not know to tell deflate() to finish +up the compressed stream. If we are not yet at the end of the input, then the zlib +constant Z_NO_FLUSH will be passed to deflate to indicate that we are still +in the middle of the uncompressed data. +

+If there is an error in reading from the input file, the process is aborted with +deflateEnd() being called to free the allocated zlib state before returning +the error. We wouldn't want a memory leak, now would we? deflateEnd() can be called +at any time after the state has been initialized. Once that's done, deflateInit() (or +deflateInit2()) would have to be called to start a new compression process. There is +no point here in checking the deflateEnd() return code. The deallocation can't fail. +


+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)deflateEnd(&strm);
+            return Z_ERRNO;
+        }
+        flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
+        strm.next_in = in;
+
+The inner do-loop passes our chunk of input data to deflate(), and then +keeps calling deflate() until it is done producing output. Once there is no more +new output, deflate() is guaranteed to have consumed all of the input, i.e., +avail_in will be zero. +

+        /* run deflate() on input until output buffer not full, finish
+           compression if all of source has been read in */
+        do {
+
+Output space is provided to deflate() by setting avail_out to the number +of available output bytes and next_out to a pointer to that space. +

+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+
+Now we call the compression engine itself, deflate(). It takes as many of the +avail_in bytes at next_in as it can process, and writes as many as +avail_out bytes to next_out. Those counters and pointers are then +updated past the input data consumed and the output data written. It is the amount of +output space available that may limit how much input is consumed. +Hence the inner loop to make sure that +all of the input is consumed by providing more output space each time. Since avail_in +and next_in are updated by deflate(), we don't have to mess with those +between deflate() calls until it's all used up. +

+The parameters to deflate() are a pointer to the strm structure containing +the input and output information and the internal compression engine state, and a parameter +indicating whether and how to flush data to the output. Normally deflate will consume +several K bytes of input data before producing any output (except for the header), in order +to accumulate statistics on the data for optimum compression. It will then put out a burst of +compressed data, and proceed to consume more input before the next burst. Eventually, +deflate() +must be told to terminate the stream, complete the compression with provided input data, and +write out the trailer check value. deflate() will continue to compress normally as long +as the flush parameter is Z_NO_FLUSH. Once the Z_FINISH parameter is provided, +deflate() will begin to complete the compressed output stream. However depending on how +much output space is provided, deflate() may have to be called several times until it +has provided the complete compressed stream, even after it has consumed all of the input. The flush +parameter must continue to be Z_FINISH for those subsequent calls. +

+There are other values of the flush parameter that are used in more advanced applications. You can +force deflate() to produce a burst of output that encodes all of the input data provided +so far, even if it wouldn't have otherwise, for example to control data latency on a link with +compressed data. You can also ask that deflate() do that as well as erase any history up to +that point so that what follows can be decompressed independently, for example for random access +applications. Both requests will degrade compression by an amount depending on how often such +requests are made. +

+deflate() has a return value that can indicate errors, yet we do not check it here. Why +not? Well, it turns out that deflate() can do no wrong here. Let's go through +deflate()'s return values and dispense with them one by one. The possible values are +Z_OK, Z_STREAM_END, Z_STREAM_ERROR, or Z_BUF_ERROR. Z_OK +is, well, ok. Z_STREAM_END is also ok and will be returned for the last call of +deflate(). This is already guaranteed by calling deflate() with Z_FINISH +until it has no more output. Z_STREAM_ERROR is only possible if the stream is not +initialized properly, but we did initialize it properly. There is no harm in checking for +Z_STREAM_ERROR here, for example to check for the possibility that some +other part of the application inadvertently clobbered the memory containing the zlib state. +Z_BUF_ERROR will be explained further below, but +suffice it to say that this is simply an indication that deflate() could not consume +more input or produce more output. deflate() can be called again with more output space +or more available input, which it will be in this code. +


+            ret = deflate(&strm, flush);    /* no bad return value */
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+
+Now we compute how much output deflate() provided on the last call, which is the +difference between how much space was provided before the call, and how much output space +is still available after the call. Then that data, if any, is written to the output file. +We can then reuse the output buffer for the next call of deflate(). Again if there +is a file i/o error, we call deflateEnd() before returning to avoid a memory leak. +

+            have = CHUNK - strm.avail_out;
+            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+                (void)deflateEnd(&strm);
+                return Z_ERRNO;
+            }
+
+The inner do-loop is repeated until the last deflate() call fails to fill the +provided output buffer. Then we know that deflate() has done as much as it can with +the provided input, and that all of that input has been consumed. We can then fall out of this +loop and reuse the input buffer. +

+The way we tell that deflate() has no more output is by seeing that it did not fill +the output buffer, leaving avail_out greater than zero. However suppose that +deflate() has no more output, but just so happened to exactly fill the output buffer! +avail_out is zero, and we can't tell that deflate() has done all it can. +As far as we know, deflate() +has more output for us. So we call it again. But now deflate() produces no output +at all, and avail_out remains unchanged as CHUNK. That deflate() call +wasn't able to do anything, either consume input or produce output, and so it returns +Z_BUF_ERROR. (See, I told you I'd cover this later.) However this is not a problem at +all. Now we finally have the desired indication that deflate() is really done, +and so we drop out of the inner loop to provide more input to deflate(). +

+With flush set to Z_FINISH, this final set of deflate() calls will +complete the output stream. Once that is done, subsequent calls of deflate() would return +Z_STREAM_ERROR if the flush parameter is not Z_FINISH, and do no more processing +until the state is reinitialized. +

+Some applications of zlib have two loops that call deflate() +instead of the single inner loop we have here. The first loop would call +without flushing and feed all of the data to deflate(). The second loop would call +deflate() with no more +data and the Z_FINISH parameter to complete the process. As you can see from this +example, that can be avoided by simply keeping track of the current flush state. +


+        } while (strm.avail_out == 0);
+        assert(strm.avail_in == 0);     /* all input will be used */
+
+Now we check to see if we have already processed all of the input file. That information was +saved in the flush variable, so we see if that was set to Z_FINISH. If so, +then we're done and we fall out of the outer loop. We're guaranteed to get Z_STREAM_END +from the last deflate() call, since we ran it until the last chunk of input was +consumed and all of the output was generated. +

+        /* done when last data in file processed */
+    } while (flush != Z_FINISH);
+    assert(ret == Z_STREAM_END);        /* stream will be complete */
+
+The process is complete, but we still need to deallocate the state to avoid a memory leak +(or rather more like a memory hemorrhage if you didn't do this). Then +finally we can return with a happy return value. +

+    /* clean up and return */
+    (void)deflateEnd(&strm);
+    return Z_OK;
+}
+
+Now we do the same thing for decompression in the inf() routine. inf() +decompresses what is hopefully a valid zlib stream from the input file and writes the +uncompressed data to the output file. Much of the discussion above for def() +applies to inf() as well, so the discussion here will focus on the differences between +the two. +

+/* Decompress from file source to file dest until stream ends or EOF.
+   inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_DATA_ERROR if the deflate data is
+   invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+   the version of the library linked do not match, or Z_ERRNO if there
+   is an error reading or writing the files. */
+int inf(FILE *source, FILE *dest)
+{
+
+The local variables have the same functionality as they do for def(). The +only difference is that there is no flush variable, since inflate() +can tell from the zlib stream itself when the stream is complete. +

+    int ret;
+    unsigned have;
+    z_stream strm;
+    char in[CHUNK];
+    char out[CHUNK];
+
+The initialization of the state is the same, except that there is no compression level, +of course, and two more elements of the structure are initialized. avail_in +and next_in must be initialized before calling inflateInit(). This +is because the application has the option to provide the start of the zlib stream in +order for inflateInit() to have access to information about the compression +method to aid in memory allocation. In the current implementation of zlib +(up through versions 1.2.x), the method-dependent memory allocations are deferred to the first call of +inflate() anyway. However those fields must be initialized since later versions +of zlib that provide more compression methods may take advantage of this interface. +In any case, no decompression is performed by inflateInit(), so the +avail_out and next_out fields do not need to be initialized before calling. +

+Here avail_in is set to zero and next_in is set to Z_NULL to +indicate that no input data is being provided. +


+    /* allocate inflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit(&strm);
+    if (ret != Z_OK)
+        return ret;
+
+The outer do-loop decompresses input until inflate() indicates +that it has reached the end of the compressed data and has produced all of the uncompressed +output. This is in contrast to def() which processes all of the input file. +If end-of-file is reached before the compressed data self-terminates, then the compressed +data is incomplete and an error is returned. +

+    /* decompress until deflate stream ends or end of file */
+    do {
+
+We read input data and set the strm structure accordingly. If we've reached the +end of the input file, then we leave the outer loop and report an error, since the +compressed data is incomplete. Note that we may read more data than is eventually consumed +by inflate(), if the input file continues past the zlib stream. +For applications where zlib streams are embedded in other data, this routine would +need to be modified to return the unused data, or at least indicate how much of the input +data was not used, so the application would know where to pick up after the zlib stream. +

+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)inflateEnd(&strm);
+            return Z_ERRNO;
+        }
+        if (strm.avail_in == 0)
+            break;
+        strm.next_in = in;
+
+The inner do-loop has the same function it did in def(), which is to +keep calling inflate() until has generated all of the output it can with the +provided input. +

+        /* run inflate() on input until output buffer not full */
+        do {
+
+Just like in def(), the same output space is provided for each call of inflate(). +

+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+
+Now we run the decompression engine itself. There is no need to adjust the flush parameter, since +the zlib format is self-terminating. The main difference here is that there are +return values that we need to pay attention to. Z_DATA_ERROR +indicates that inflate() detected an error in the zlib compressed data format, +which means that either the data is not a zlib stream to begin with, or that the data was +corrupted somewhere along the way since it was compressed. The other error to be processed is +Z_MEM_ERROR, which can occur since memory allocation is deferred until inflate() +needs it, unlike deflate(), whose memory is allocated at the start by deflateInit(). +

+Advanced applications may use +deflateSetDictionary() to prime deflate() with a set of likely data to improve the +first 32K or so of compression. This is noted in the zlib header, so inflate() +requests that that dictionary be provided before it can start to decompress. Without the dictionary, +correct decompression is not possible. For this routine, we have no idea what the dictionary is, +so the Z_NEED_DICT indication is converted to a Z_DATA_ERROR. +

+inflate() can also return Z_STREAM_ERROR, which should not be possible here, +but could be checked for as noted above for def(). Z_BUF_ERROR does not need to be +checked for here, for the same reasons noted for def(). Z_STREAM_END will be +checked for later. +


+            ret = inflate(&strm, Z_NO_FLUSH);
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+            switch (ret) {
+            case Z_NEED_DICT:
+                ret = Z_DATA_ERROR;     /* and fall through */
+            case Z_DATA_ERROR:
+            case Z_MEM_ERROR:
+                (void)inflateEnd(&strm);
+                return ret;
+            }
+
+The output of inflate() is handled identically to that of deflate(). +

+            have = CHUNK - strm.avail_out;
+            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+                (void)inflateEnd(&strm);
+                return Z_ERRNO;
+            }
+
+The inner do-loop ends when inflate() has no more output as indicated +by not filling the output buffer, just as for deflate(). In this case, we cannot +assert that strm.avail_in will be zero, since the deflate stream may end before the file +does. +

+        } while (strm.avail_out == 0);
+
+The outer do-loop ends when inflate() reports that it has reached the +end of the input zlib stream, has completed the decompression and integrity +check, and has provided all of the output. This is indicated by the inflate() +return value Z_STREAM_END. The inner loop is guaranteed to leave ret +equal to Z_STREAM_END if the last chunk of the input file read contained the end +of the zlib stream. So if the return value is not Z_STREAM_END, the +loop continues to read more input. +

+        /* done when inflate() says it's done */
+    } while (ret != Z_STREAM_END);
+
+At this point, decompression successfully completed, or we broke out of the loop due to no +more data being available from the input file. If the last inflate() return value +is not Z_STREAM_END, then the zlib stream was incomplete and a data error +is returned. Otherwise, we return with a happy return value. Of course, inflateEnd() +is called first to avoid a memory leak. +

+    /* clean up and return */
+    (void)inflateEnd(&strm);
+    return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
+}
+
+That ends the routines that directly use zlib. The following routines make this +a command-line program by running data through the above routines from stdin to +stdout, and handling any errors reported by def() or inf(). +

+zerr() is used to interpret the possible error codes from def() +and inf(), as detailed in their comments above, and print out an error message. +Note that these are only a subset of the possible return values from deflate() +and inflate(). +


+/* report a zlib or i/o error */
+void zerr(int ret)
+{
+    fputs("zpipe: ", stderr);
+    switch (ret) {
+    case Z_ERRNO:
+        if (ferror(stdin))
+            fputs("error reading stdin\n", stderr);
+        if (ferror(stdout))
+            fputs("error writing stdout\n", stderr);
+        break;
+    case Z_STREAM_ERROR:
+        fputs("invalid compression level\n", stderr);
+        break;
+    case Z_DATA_ERROR:
+        fputs("invalid or incomplete deflate data\n", stderr);
+        break;
+    case Z_MEM_ERROR:
+        fputs("out of memory\n", stderr);
+        break;
+    case Z_VERSION_ERROR:
+        fputs("zlib version mismatch!\n", stderr);
+    }
+}
+
+Here is the main() routine used to test def() and inf(). The +zpipe command is simply a compression pipe from stdin to stdout, if +no arguments are given, or it is a decompression pipe if zpipe -d is used. If any other +arguments are provided, no compression or decompression is performed. Instead a usage +message is displayed. Examples are zpipe < foo.txt > foo.txt.z to compress, and +zpipe -d < foo.txt.z > foo.txt to decompress. +

+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+    int ret;
+
+    /* do compression if no arguments */
+    if (argc == 1) {
+        ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
+        if (ret != Z_OK)
+            zerr(ret);
+        return ret;
+    }
+
+    /* do decompression if -d specified */
+    else if (argc == 2 && strcmp(argv[1], "-d") == 0) {
+        ret = inf(stdin, stdout);
+        if (ret != Z_OK)
+            zerr(ret);
+        return ret;
+    }
+
+    /* otherwise, report usage */
+    else {
+        fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr);
+        return 1;
+    }
+}
+
+
+Copyright (c) 2004 by Mark Adler
Last modified 13 November 2004 + + diff --git a/common/dist/zlib/examples/zpipe.c b/common/dist/zlib/examples/zpipe.c new file mode 100644 index 000000000..439ed9c4c --- /dev/null +++ b/common/dist/zlib/examples/zpipe.c @@ -0,0 +1,193 @@ +/* $NetBSD: zpipe.c,v 1.1.1.1 2006/01/14 20:11:09 christos Exp $ */ + +/* zpipe.c: example of proper use of zlib's inflate() and deflate() + Not copyrighted -- provided to the public domain + Version 1.2 9 November 2004 Mark Adler */ + +/* Version history: + 1.0 30 Oct 2004 First version + 1.1 8 Nov 2004 Add void casting for unused return values + Use switch statement for inflate() return values + 1.2 9 Nov 2004 Add assertions to document zlib guarantees + 1.3 6 Apr 2005 Remove incorrect assertion in inf() + */ + +#include +#include +#include +#include "zlib.h" + +#define CHUNK 16384 + +/* Compress from file source to file dest until EOF on source. + def() returns Z_OK on success, Z_MEM_ERROR if memory could not be + allocated for processing, Z_STREAM_ERROR if an invalid compression + level is supplied, Z_VERSION_ERROR if the version of zlib.h and the + version of the library linked do not match, or Z_ERRNO if there is + an error reading or writing the files. */ +int def(FILE *source, FILE *dest, int level) +{ + int ret, flush; + unsigned have; + z_stream strm; + char in[CHUNK]; + char out[CHUNK]; + + /* allocate deflate state */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + ret = deflateInit(&strm, level); + if (ret != Z_OK) + return ret; + + /* compress until end of file */ + do { + strm.avail_in = fread(in, 1, CHUNK, source); + if (ferror(source)) { + (void)deflateEnd(&strm); + return Z_ERRNO; + } + flush = feof(source) ? Z_FINISH : Z_NO_FLUSH; + strm.next_in = in; + + /* run deflate() on input until output buffer not full, finish + compression if all of source has been read in */ + do { + strm.avail_out = CHUNK; + strm.next_out = out; + ret = deflate(&strm, flush); /* no bad return value */ + assert(ret != Z_STREAM_ERROR); /* state not clobbered */ + have = CHUNK - strm.avail_out; + if (fwrite(out, 1, have, dest) != have || ferror(dest)) { + (void)deflateEnd(&strm); + return Z_ERRNO; + } + } while (strm.avail_out == 0); + assert(strm.avail_in == 0); /* all input will be used */ + + /* done when last data in file processed */ + } while (flush != Z_FINISH); + assert(ret == Z_STREAM_END); /* stream will be complete */ + + /* clean up and return */ + (void)deflateEnd(&strm); + return Z_OK; +} + +/* Decompress from file source to file dest until stream ends or EOF. + inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be + allocated for processing, Z_DATA_ERROR if the deflate data is + invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and + the version of the library linked do not match, or Z_ERRNO if there + is an error reading or writing the files. */ +int inf(FILE *source, FILE *dest) +{ + int ret; + unsigned have; + z_stream strm; + char in[CHUNK]; + char out[CHUNK]; + + /* allocate inflate state */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit(&strm); + if (ret != Z_OK) + return ret; + + /* decompress until deflate stream ends or end of file */ + do { + strm.avail_in = fread(in, 1, CHUNK, source); + if (ferror(source)) { + (void)inflateEnd(&strm); + return Z_ERRNO; + } + if (strm.avail_in == 0) + break; + strm.next_in = in; + + /* run inflate() on input until output buffer not full */ + do { + strm.avail_out = CHUNK; + strm.next_out = out; + ret = inflate(&strm, Z_NO_FLUSH); + assert(ret != Z_STREAM_ERROR); /* state not clobbered */ + switch (ret) { + case Z_NEED_DICT: + ret = Z_DATA_ERROR; /* and fall through */ + case Z_DATA_ERROR: + case Z_MEM_ERROR: + (void)inflateEnd(&strm); + return ret; + } + have = CHUNK - strm.avail_out; + if (fwrite(out, 1, have, dest) != have || ferror(dest)) { + (void)inflateEnd(&strm); + return Z_ERRNO; + } + } while (strm.avail_out == 0); + + /* done when inflate() says it's done */ + } while (ret != Z_STREAM_END); + + /* clean up and return */ + (void)inflateEnd(&strm); + return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR; +} + +/* report a zlib or i/o error */ +void zerr(int ret) +{ + fputs("zpipe: ", stderr); + switch (ret) { + case Z_ERRNO: + if (ferror(stdin)) + fputs("error reading stdin\n", stderr); + if (ferror(stdout)) + fputs("error writing stdout\n", stderr); + break; + case Z_STREAM_ERROR: + fputs("invalid compression level\n", stderr); + break; + case Z_DATA_ERROR: + fputs("invalid or incomplete deflate data\n", stderr); + break; + case Z_MEM_ERROR: + fputs("out of memory\n", stderr); + break; + case Z_VERSION_ERROR: + fputs("zlib version mismatch!\n", stderr); + } +} + +/* compress or decompress from stdin to stdout */ +int main(int argc, char **argv) +{ + int ret; + + /* do compression if no arguments */ + if (argc == 1) { + ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION); + if (ret != Z_OK) + zerr(ret); + return ret; + } + + /* do decompression if -d specified */ + else if (argc == 2 && strcmp(argv[1], "-d") == 0) { + ret = inf(stdin, stdout); + if (ret != Z_OK) + zerr(ret); + return ret; + } + + /* otherwise, report usage */ + else { + fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr); + return 1; + } +} diff --git a/common/dist/zlib/examples/zran.c b/common/dist/zlib/examples/zran.c new file mode 100644 index 000000000..3e997495a --- /dev/null +++ b/common/dist/zlib/examples/zran.c @@ -0,0 +1,406 @@ +/* $NetBSD: zran.c,v 1.1.1.1 2006/01/14 20:11:10 christos Exp $ */ + +/* zran.c -- example of zlib/gzip stream indexing and random access + * Copyright (C) 2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + Version 1.0 29 May 2005 Mark Adler */ + +/* Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary() + for random access of a compressed file. A file containing a zlib or gzip + stream is provided on the command line. The compressed stream is decoded in + its entirety, and an index built with access points about every SPAN bytes + in the uncompressed output. The compressed file is left open, and can then + be read randomly, having to decompress on the average SPAN/2 uncompressed + bytes before getting to the desired block of data. + + An access point can be created at the start of any deflate block, by saving + the starting file offset and bit of that block, and the 32K bytes of + uncompressed data that precede that block. Also the uncompressed offset of + that block is saved to provide a referece for locating a desired starting + point in the uncompressed stream. build_index() works by decompressing the + input zlib or gzip stream a block at a time, and at the end of each block + deciding if enough uncompressed data has gone by to justify the creation of + a new access point. If so, that point is saved in a data structure that + grows as needed to accommodate the points. + + To use the index, an offset in the uncompressed data is provided, for which + the latest accees point at or preceding that offset is located in the index. + The input file is positioned to the specified location in the index, and if + necessary the first few bits of the compressed data is read from the file. + inflate is initialized with those bits and the 32K of uncompressed data, and + the decompression then proceeds until the desired offset in the file is + reached. Then the decompression continues to read the desired uncompressed + data from the file. + + Another approach would be to generate the index on demand. In that case, + requests for random access reads from the compressed data would try to use + the index, but if a read far enough past the end of the index is required, + then further index entries would be generated and added. + + There is some fair bit of overhead to starting inflation for the random + access, mainly copying the 32K byte dictionary. So if small pieces of the + file are being accessed, it would make sense to implement a cache to hold + some lookahead and avoid many calls to extract() for small lengths. + + Another way to build an index would be to use inflateCopy(). That would + not be constrained to have access points at block boundaries, but requires + more memory per access point, and also cannot be saved to file due to the + use of pointers in the state. The approach here allows for storage of the + index in a file. + */ + +#include +#include +#include +#include "zlib.h" + +#define local static + +#define SPAN 1048576L /* desired distance between access points */ +#define WINSIZE 32768U /* sliding window size */ +#define CHUNK 16384 /* file input buffer size */ + +/* access point entry */ +struct point { + off_t out; /* corresponding offset in uncompressed data */ + off_t in; /* offset in input file of first full byte */ + int bits; /* number of bits (1-7) from byte at in - 1, or 0 */ + unsigned char window[WINSIZE]; /* preceding 32K of uncompressed data */ +}; + +/* access point list */ +struct access { + int have; /* number of list entries filled in */ + int size; /* number of list entries allocated */ + struct point *list; /* allocated list */ +}; + +/* Deallocate an index built by build_index() */ +local void free_index(struct access *index) +{ + if (index != NULL) { + free(index->list); + free(index); + } +} + +/* Add an entry to the access point list. If out of memory, deallocate the + existing list and return NULL. */ +local struct access *addpoint(struct access *index, int bits, + off_t in, off_t out, unsigned left, unsigned char *window) +{ + struct point *next; + + /* if list is empty, create it (start with eight points) */ + if (index == NULL) { + index = malloc(sizeof(struct access)); + if (index == NULL) return NULL; + index->list = malloc(sizeof(struct point) << 3); + if (index->list == NULL) { + free(index); + return NULL; + } + index->size = 8; + index->have = 0; + } + + /* if list is full, make it bigger */ + else if (index->have == index->size) { + index->size <<= 1; + next = realloc(index->list, sizeof(struct point) * index->size); + if (next == NULL) { + free_index(index); + return NULL; + } + index->list = next; + } + + /* fill in entry and increment how many we have */ + next = index->list + index->have; + next->bits = bits; + next->in = in; + next->out = out; + if (left) + memcpy(next->window, window + WINSIZE - left, left); + if (left < WINSIZE) + memcpy(next->window + left, window, WINSIZE - left); + index->have++; + + /* return list, possibly reallocated */ + return index; +} + +/* Make one entire pass through the compressed stream and build an index, with + access points about every span bytes of uncompressed output -- span is + chosen to balance the speed of random access against the memory requirements + of the list, about 32K bytes per access point. Note that data after the end + of the first zlib or gzip stream in the file is ignored. build_index() + returns the number of access points on success (>= 1), Z_MEM_ERROR for out + of memory, Z_DATA_ERROR for an error in the input file, or Z_ERRNO for a + file read error. On success, *built points to the resulting index. */ +local int build_index(FILE *in, off_t span, struct access **built) +{ + int ret; + off_t totin, totout; /* our own total counters to avoid 4GB limit */ + off_t last; /* totout value of last access point */ + struct access *index; /* access points being generated */ + z_stream strm; + unsigned char input[CHUNK]; + unsigned char window[WINSIZE]; + + /* initialize inflate */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, 47); /* automatic zlib or gzip decoding */ + if (ret != Z_OK) + return ret; + + /* inflate the input, maintain a sliding window, and build an index -- this + also validates the integrity of the compressed data using the check + information at the end of the gzip or zlib stream */ + totin = totout = last = 0; + index = NULL; /* will be allocated by first addpoint() */ + strm.avail_out = 0; + do { + /* get some compressed data from input file */ + strm.avail_in = fread(input, 1, CHUNK, in); + if (ferror(in)) { + ret = Z_ERRNO; + goto build_index_error; + } + if (strm.avail_in == 0) { + ret = Z_DATA_ERROR; + goto build_index_error; + } + strm.next_in = input; + + /* process all of that, or until end of stream */ + do { + /* reset sliding window if necessary */ + if (strm.avail_out == 0) { + strm.avail_out = WINSIZE; + strm.next_out = window; + } + + /* inflate until out of input, output, or at end of block -- + update the total input and output counters */ + totin += strm.avail_in; + totout += strm.avail_out; + ret = inflate(&strm, Z_BLOCK); /* return at end of block */ + totin -= strm.avail_in; + totout -= strm.avail_out; + if (ret == Z_NEED_DICT) + ret = Z_DATA_ERROR; + if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR) + goto build_index_error; + if (ret == Z_STREAM_END) + break; + + /* if at end of block, consider adding an index entry (note that if + data_type indicates an end-of-block, then all of the + uncompressed data from that block has been delivered, and none + of the compressed data after that block has been consumed, + except for up to seven bits) -- the totout == 0 provides an + entry point after the zlib or gzip header, and assures that the + index always has at least one access point; we avoid creating an + access point after the last block by checking bit 6 of data_type + */ + if ((strm.data_type & 128) && !(strm.data_type & 64) && + (totout == 0 || totout - last > span)) { + index = addpoint(index, strm.data_type & 7, totin, + totout, strm.avail_out, window); + if (index == NULL) { + ret = Z_MEM_ERROR; + goto build_index_error; + } + last = totout; + } + } while (strm.avail_in != 0); + } while (ret != Z_STREAM_END); + + /* clean up and return index (release unused entries in list) */ + (void)inflateEnd(&strm); + index = realloc(index, sizeof(struct point) * index->have); + index->size = index->have; + *built = index; + return index->size; + + /* return error */ + build_index_error: + (void)inflateEnd(&strm); + if (index != NULL) + free_index(index); + return ret; +} + +/* Use the index to read len bytes from offset into buf, return bytes read or + negative for error (Z_DATA_ERROR or Z_MEM_ERROR). If data is requested past + the end of the uncompressed data, then extract() will return a value less + than len, indicating how much as actually read into buf. This function + should not return a data error unless the file was modified since the index + was generated. extract() may also return Z_ERRNO if there is an error on + reading or seeking the input file. */ +local int extract(FILE *in, struct access *index, off_t offset, + unsigned char *buf, int len) +{ + int ret, skip; + z_stream strm; + struct point *here; + unsigned char input[CHUNK]; + unsigned char discard[WINSIZE]; + + /* proceed only if something reasonable to do */ + if (len < 0) + return 0; + + /* find where in stream to start */ + here = index->list; + ret = index->have; + while (--ret && here[1].out <= offset) + here++; + + /* initialize file and inflate state to start there */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, -15); /* raw inflate */ + if (ret != Z_OK) + return ret; + ret = fseeko(in, here->in - (here->bits ? 1 : 0), SEEK_SET); + if (ret == -1) + goto extract_ret; + if (here->bits) { + ret = getc(in); + if (ret == -1) { + ret = ferror(in) ? Z_ERRNO : Z_DATA_ERROR; + goto extract_ret; + } + (void)inflatePrime(&strm, here->bits, ret >> (8 - here->bits)); + } + (void)inflateSetDictionary(&strm, here->window, WINSIZE); + + /* skip uncompressed bytes until offset reached, then satisfy request */ + offset -= here->out; + strm.avail_in = 0; + skip = 1; /* while skipping to offset */ + do { + /* define where to put uncompressed data, and how much */ + if (offset == 0 && skip) { /* at offset now */ + strm.avail_out = len; + strm.next_out = buf; + skip = 0; /* only do this once */ + } + if (offset > WINSIZE) { /* skip WINSIZE bytes */ + strm.avail_out = WINSIZE; + strm.next_out = discard; + offset -= WINSIZE; + } + else if (offset != 0) { /* last skip */ + strm.avail_out = (unsigned)offset; + strm.next_out = discard; + offset = 0; + } + + /* uncompress until avail_out filled, or end of stream */ + do { + if (strm.avail_in == 0) { + strm.avail_in = fread(input, 1, CHUNK, in); + if (ferror(in)) { + ret = Z_ERRNO; + goto extract_ret; + } + if (strm.avail_in == 0) { + ret = Z_DATA_ERROR; + goto extract_ret; + } + strm.next_in = input; + } + ret = inflate(&strm, Z_NO_FLUSH); /* normal inflate */ + if (ret == Z_NEED_DICT) + ret = Z_DATA_ERROR; + if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR) + goto extract_ret; + if (ret == Z_STREAM_END) + break; + } while (strm.avail_out != 0); + + /* if reach end of stream, then don't keep trying to get more */ + if (ret == Z_STREAM_END) + break; + + /* do until offset reached and requested data read, or stream ends */ + } while (skip); + + /* compute number of uncompressed bytes read after offset */ + ret = skip ? 0 : len - strm.avail_out; + + /* clean up and return bytes read or error */ + extract_ret: + (void)inflateEnd(&strm); + return ret; +} + +/* Demonstrate the use of build_index() and extract() by processing the file + provided on the command line, and the extracting 16K from about 2/3rds of + the way through the uncompressed output, and writing that to stdout. */ +int main(int argc, char **argv) +{ + int len; + off_t offset; + FILE *in; + struct access *index; + unsigned char buf[CHUNK]; + + /* open input file */ + if (argc != 2) { + fprintf(stderr, "usage: zran file.gz\n"); + return 1; + } + in = fopen(argv[1], "rb"); + if (in == NULL) { + fprintf(stderr, "zran: could not open %s for reading\n", argv[1]); + return 1; + } + + /* build index */ + len = build_index(in, SPAN, &index); + if (len < 0) { + fclose(in); + switch (len) { + case Z_MEM_ERROR: + fprintf(stderr, "zran: out of memory\n"); + break; + case Z_DATA_ERROR: + fprintf(stderr, "zran: compressed data error in %s\n", argv[1]); + break; + case Z_ERRNO: + fprintf(stderr, "zran: read error on %s\n", argv[1]); + break; + default: + fprintf(stderr, "zran: error %d while building index\n", len); + } + return 1; + } + fprintf(stderr, "zran: built index with %d access points\n", len); + + /* use index by reading some bytes from an arbitrary offset */ + offset = (index->list[index->have - 1].out << 1) / 3; + len = extract(in, index, offset, buf, CHUNK); + if (len < 0) + fprintf(stderr, "zran: extraction failed: %s error\n", + len == Z_MEM_ERROR ? "out of memory" : "input corrupted"); + else { + fwrite(buf, 1, len, stdout); + fprintf(stderr, "zran: extracted %d bytes at %llu\n", len, offset); + } + + /* clean up and exit */ + free_index(index); + fclose(in); + return 0; +} diff --git a/common/dist/zlib/gzio.c b/common/dist/zlib/gzio.c new file mode 100644 index 000000000..f4970be04 --- /dev/null +++ b/common/dist/zlib/gzio.c @@ -0,0 +1,1035 @@ +/* $NetBSD: gzio.c,v 1.3 2011/05/19 22:23:12 tsutsui Exp $ */ + +/* gzio.c -- IO on .gz files + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Compile this file with -DNO_GZCOMPRESS to avoid the compression code. + */ + +/* @(#) Id */ + +#include + +#include "zutil.h" + +#ifdef NO_DEFLATE /* for compatibility with old definition */ +# define NO_GZCOMPRESS +#endif + +#ifndef NO_DUMMY_DECL +struct internal_state {int dummy;}; /* for buggy compilers */ +#endif + +#ifndef Z_BUFSIZE +# ifdef MAXSEG_64K +# define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */ +# else +# define Z_BUFSIZE 16384 +# endif +#endif +#ifndef Z_PRINTF_BUFSIZE +# define Z_PRINTF_BUFSIZE 4096 +#endif + +#ifdef __MVS__ +# pragma map (fdopen , "\174\174FDOPEN") + FILE *fdopen(int, const char *); +#endif + +#ifndef STDC +extern voidp malloc OF((uInt size)); +extern void free OF((voidpf ptr)); +#endif + +#define ALLOC(size) malloc(size) +#define TRYFREE(p) {if (p) free(p);} + +static int const gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */ + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ +#define HEAD_CRC 0x02 /* bit 1 set: header CRC present */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define RESERVED 0xE0 /* bits 5..7: reserved */ + +typedef struct gz_stream { + z_stream stream; + int z_err; /* error code for last stream operation */ + int z_eof; /* set if end of input file */ + FILE *file; /* .gz file */ + Byte *inbuf; /* input buffer */ + Byte *outbuf; /* output buffer */ + uLong crc; /* crc32 of uncompressed data */ + char *msg; /* error message */ + char *path; /* path name for debugging only */ + int transparent; /* 1 if input file is not a .gz file */ + char mode; /* 'w' or 'r' */ + z_off_t start; /* start of compressed data in file (header skipped) */ + z_off_t in; /* bytes into deflate or inflate */ + z_off_t out; /* bytes out of deflate or inflate */ + int back; /* one character push-back */ + int last; /* true if push-back is last character */ +} gz_stream; + + +local gzFile gz_open OF((const char *path, const char *mode, int fd)); +#ifndef NO_GZCOMPRESS +local int do_flush OF((gzFile file, int flush)); +#endif +local int get_byte OF((gz_stream *s)); +local void check_header OF((gz_stream *s)); +local int destroy OF((gz_stream *s)); +#ifndef NO_GZCOMPRESS +local void putLong OF((FILE *file, uLong x)); +#endif +local uLong getLong OF((gz_stream *s)); + +/* =========================================================================== + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb"). The file is given either by file descriptor + or path name (if fd == -1). + gz_open returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). +*/ +local gzFile gz_open (path, mode, fd) + const char *path; + const char *mode; + int fd; +{ + int err; + int level = Z_DEFAULT_COMPRESSION; /* compression level */ + int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */ + const char *p = mode; + gz_stream *s; + char fmode[80]; /* copy of mode, without the compression level */ + char *m = fmode; + + if (!path || !mode) return Z_NULL; + + s = (gz_stream *)ALLOC(sizeof(gz_stream)); + if (!s) return Z_NULL; + + s->stream.zalloc = (alloc_func)0; + s->stream.zfree = (free_func)0; + s->stream.opaque = (voidpf)0; + s->stream.next_in = s->inbuf = Z_NULL; + s->stream.next_out = s->outbuf = Z_NULL; + s->stream.avail_in = s->stream.avail_out = 0; + s->file = NULL; + s->z_err = Z_OK; + s->z_eof = 0; + s->in = 0; + s->out = 0; + s->back = EOF; + s->crc = crc32(0L, Z_NULL, 0); + s->msg = NULL; + s->transparent = 0; + + s->path = (char*)ALLOC(strlen(path)+1); + if (s->path == NULL) { + return destroy(s), (gzFile)Z_NULL; + } + strcpy(s->path, path); /* do this early for debugging */ + + s->mode = '\0'; + do { + if (*p == 'r') s->mode = 'r'; + if (*p == 'w' || *p == 'a') s->mode = 'w'; + if (*p >= '0' && *p <= '9') { + level = *p - '0'; + } else if (*p == 'f') { + strategy = Z_FILTERED; + } else if (*p == 'h') { + strategy = Z_HUFFMAN_ONLY; + } else if (*p == 'R') { + strategy = Z_RLE; + } else { + *m++ = *p; /* copy the mode */ + } + } while (*p++ && m != fmode + sizeof(fmode)); + if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL; + + if (s->mode == 'w') { +#ifdef NO_GZCOMPRESS + err = Z_STREAM_ERROR; +#else + err = deflateInit2(&(s->stream), level, + Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy); + /* windowBits is passed < 0 to suppress zlib header */ + + s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); +#endif + if (err != Z_OK || s->outbuf == Z_NULL) { + return destroy(s), (gzFile)Z_NULL; + } + } else { + s->stream.next_in = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); + + err = inflateInit2(&(s->stream), -MAX_WBITS); + /* windowBits is passed < 0 to tell that there is no zlib header. + * Note that in this case inflate *requires* an extra "dummy" byte + * after the compressed stream in order to complete decompression and + * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are + * present after the compressed stream. + */ + if (err != Z_OK || s->inbuf == Z_NULL) { + return destroy(s), (gzFile)Z_NULL; + } + } + s->stream.avail_out = Z_BUFSIZE; + + errno = 0; + s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode); + + if (s->file == NULL) { + return destroy(s), (gzFile)Z_NULL; + } + if (s->mode == 'w') { + /* Write a very simple .gz header: + */ + fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1], + Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE); + s->start = 10L; + /* We use 10L instead of ftell(s->file) to because ftell causes an + * fflush on some systems. This version of the library doesn't use + * start anyway in write mode, so this initialization is not + * necessary. + */ + } else { + check_header(s); /* skip the .gz header */ + s->start = ftell(s->file) - s->stream.avail_in; + } + + return (gzFile)s; +} + +/* =========================================================================== + Opens a gzip (.gz) file for reading or writing. +*/ +gzFile ZEXPORT gzopen (path, mode) + const char *path; + const char *mode; +{ + return gz_open (path, mode, -1); +} + +/* =========================================================================== + Associate a gzFile with the file descriptor fd. fd is not dup'ed here + to mimic the behavio(u)r of fdopen. +*/ +gzFile ZEXPORT gzdopen (fd, mode) + int fd; + const char *mode; +{ + char name[46]; /* allow for up to 128-bit integers */ + + if (fd < 0) return (gzFile)Z_NULL; + sprintf(name, "", fd); /* for debugging */ + + return gz_open (name, mode, fd); +} + +/* =========================================================================== + * Update the compression level and strategy + */ +int ZEXPORT gzsetparams (file, level, strategy) + gzFile file; + int level; + int strategy; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; + + /* Make room to allow flushing */ + if (s->stream.avail_out == 0) { + + s->stream.next_out = s->outbuf; + if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) { + s->z_err = Z_ERRNO; + } + s->stream.avail_out = Z_BUFSIZE; + } + + return deflateParams (&(s->stream), level, strategy); +} + +/* =========================================================================== + Read a byte from a gz_stream; update next_in and avail_in. Return EOF + for end of file. + IN assertion: the stream s has been sucessfully opened for reading. +*/ +local int get_byte(s) + gz_stream *s; +{ + if (s->z_eof) return EOF; + if (s->stream.avail_in == 0) { + errno = 0; + s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file); + if (s->stream.avail_in == 0) { + s->z_eof = 1; + if (ferror(s->file)) s->z_err = Z_ERRNO; + return EOF; + } + s->stream.next_in = s->inbuf; + } + s->stream.avail_in--; + return *(s->stream.next_in)++; +} + +/* =========================================================================== + Check the gzip header of a gz_stream opened for reading. Set the stream + mode to transparent if the gzip magic header is not present; set s->err + to Z_DATA_ERROR if the magic header is present but the rest of the header + is incorrect. + IN assertion: the stream s has already been created sucessfully; + s->stream.avail_in is zero for the first time, but may be non-zero + for concatenated .gz files. +*/ +local void check_header(s) + gz_stream *s; +{ + int method; /* method byte */ + int flags; /* flags byte */ + uInt len; + int c; + + /* Assure two bytes in the buffer so we can peek ahead -- handle case + where first byte of header is at the end of the buffer after the last + gzip segment */ + len = s->stream.avail_in; + if (len < 2) { + if (len) s->inbuf[0] = s->stream.next_in[0]; + errno = 0; + len = (uInt)fread(s->inbuf + len, 1, (size_t)(Z_BUFSIZE >> len), + s->file); + if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO; + s->stream.avail_in += len; + s->stream.next_in = s->inbuf; + if (s->stream.avail_in < 2) { + s->transparent = s->stream.avail_in; + return; + } + } + + /* Peek ahead to check the gzip magic header */ + if (s->stream.next_in[0] != gz_magic[0] || + s->stream.next_in[1] != gz_magic[1]) { + s->transparent = 1; + return; + } + s->stream.avail_in -= 2; + s->stream.next_in += 2; + + /* Check the rest of the gzip header */ + method = get_byte(s); + flags = get_byte(s); + if (method != Z_DEFLATED || (flags & RESERVED) != 0) { + s->z_err = Z_DATA_ERROR; + return; + } + + /* Discard time, xflags and OS code: */ + for (len = 0; len < 6; len++) (void)get_byte(s); + + if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */ + len = (uInt)get_byte(s); + len += ((uInt)get_byte(s))<<8; + /* len is garbage if EOF but the loop below will quit anyway */ + while (len-- != 0 && get_byte(s) != EOF) ; + } + if ((flags & ORIG_NAME) != 0) { /* skip the original file name */ + while ((c = get_byte(s)) != 0 && c != EOF) ; + } + if ((flags & COMMENT) != 0) { /* skip the .gz file comment */ + while ((c = get_byte(s)) != 0 && c != EOF) ; + } + if ((flags & HEAD_CRC) != 0) { /* skip the header crc */ + for (len = 0; len < 2; len++) (void)get_byte(s); + } + s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK; +} + + /* =========================================================================== + * Cleanup then free the given gz_stream. Return a zlib error code. + Try freeing in the reverse order of allocations. + */ +local int destroy (s) + gz_stream *s; +{ + int err = Z_OK; + + if (!s) return Z_STREAM_ERROR; + + TRYFREE(s->msg); + + if (s->stream.state != NULL) { + if (s->mode == 'w') { +#ifdef NO_GZCOMPRESS + err = Z_STREAM_ERROR; +#else + err = deflateEnd(&(s->stream)); +#endif + } else if (s->mode == 'r') { + err = inflateEnd(&(s->stream)); + } + } + if (s->file != NULL && fclose(s->file)) { +#ifdef ESPIPE + if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */ +#endif + err = Z_ERRNO; + } + if (s->z_err < 0) err = s->z_err; + + TRYFREE(s->inbuf); + TRYFREE(s->outbuf); + TRYFREE(s->path); + TRYFREE(s); + return err; +} + +/* =========================================================================== + Reads the given number of uncompressed bytes from the compressed file. + gzread returns the number of bytes actually read (0 for end of file). +*/ +int ZEXPORT gzread (file, buf, len) + gzFile file; + voidp buf; + unsigned len; +{ + gz_stream *s = (gz_stream*)file; + Bytef *start = (Bytef*)buf; /* starting point for crc computation */ + Byte *next_out; /* == stream.next_out but not forced far (for MSDOS) */ + + if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR; + + if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1; + if (s->z_err == Z_STREAM_END) return 0; /* EOF */ + + next_out = (Byte*)buf; + s->stream.next_out = (Bytef*)buf; + s->stream.avail_out = len; + + if (s->stream.avail_out && s->back != EOF) { + *next_out++ = s->back; + s->stream.next_out++; + s->stream.avail_out--; + s->back = EOF; + s->out++; + start++; + if (s->last) { + s->z_err = Z_STREAM_END; + return 1; + } + } + + while (s->stream.avail_out != 0) { + + if (s->transparent) { + /* Copy first the lookahead bytes: */ + uInt n = s->stream.avail_in; + if (n > s->stream.avail_out) n = s->stream.avail_out; + if (n > 0) { + zmemcpy(s->stream.next_out, s->stream.next_in, n); + next_out += n; + s->stream.next_out = next_out; + s->stream.next_in += n; + s->stream.avail_out -= n; + s->stream.avail_in -= n; + } + if (s->stream.avail_out > 0) { + s->stream.avail_out -= + (uInt)fread(next_out, 1, s->stream.avail_out, s->file); + } + len -= s->stream.avail_out; + s->in += len; + s->out += len; + if (len == 0) s->z_eof = 1; + return (int)len; + } + if (s->stream.avail_in == 0 && !s->z_eof) { + + errno = 0; + s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file); + if (s->stream.avail_in == 0) { + s->z_eof = 1; + if (ferror(s->file)) { + s->z_err = Z_ERRNO; + break; + } + } + s->stream.next_in = s->inbuf; + } + s->in += s->stream.avail_in; + s->out += s->stream.avail_out; + s->z_err = inflate(&(s->stream), Z_NO_FLUSH); + s->in -= s->stream.avail_in; + s->out -= s->stream.avail_out; + + if (s->z_err == Z_STREAM_END) { + /* Check CRC and original size */ + s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); + start = s->stream.next_out; + + if (getLong(s) != s->crc) { + s->z_err = Z_DATA_ERROR; + } else { + (void)getLong(s); + /* The uncompressed length returned by above getlong() may be + * different from s->out in case of concatenated .gz files. + * Check for such files: + */ + check_header(s); + if (s->z_err == Z_OK) { + inflateReset(&(s->stream)); + s->crc = crc32(0L, Z_NULL, 0); + } + } + } + if (s->z_err != Z_OK || s->z_eof) break; + } + s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); + + if (len == s->stream.avail_out && + (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO)) + return -1; + return (int)(len - s->stream.avail_out); +} + + +/* =========================================================================== + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ +int ZEXPORT gzgetc(file) + gzFile file; +{ + unsigned char c; + + return gzread(file, &c, 1) == 1 ? c : -1; +} + + +/* =========================================================================== + Push one byte back onto the stream. +*/ +int ZEXPORT gzungetc(c, file) + int c; + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'r' || c == EOF || s->back != EOF) return EOF; + s->back = c; + s->out--; + s->last = (s->z_err == Z_STREAM_END); + if (s->last) s->z_err = Z_OK; + s->z_eof = 0; + return c; +} + + +/* =========================================================================== + Reads bytes from the compressed file until len-1 characters are + read, or a newline character is read and transferred to buf, or an + end-of-file condition is encountered. The string is then terminated + with a null character. + gzgets returns buf, or Z_NULL in case of error. + + The current implementation is not optimized at all. +*/ +char * ZEXPORT gzgets(file, buf, len) + gzFile file; + char *buf; + int len; +{ + char *b = buf; + if (buf == Z_NULL || len <= 0) return Z_NULL; + + while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ; + *buf = '\0'; + return b == buf && len > 0 ? Z_NULL : b; +} + + +#ifndef NO_GZCOMPRESS +/* =========================================================================== + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of bytes actually written (0 in case of error). +*/ +int ZEXPORT gzwrite (file, buf, len) + gzFile file; + voidpc buf; + unsigned len; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; + + s->stream.next_in = __UNCONST(buf); + s->stream.avail_in = len; + + while (s->stream.avail_in != 0) { + + if (s->stream.avail_out == 0) { + + s->stream.next_out = s->outbuf; + if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) { + s->z_err = Z_ERRNO; + break; + } + s->stream.avail_out = Z_BUFSIZE; + } + s->in += s->stream.avail_in; + s->out += s->stream.avail_out; + s->z_err = deflate(&(s->stream), Z_NO_FLUSH); + s->in -= s->stream.avail_in; + s->out -= s->stream.avail_out; + if (s->z_err != Z_OK) break; + } + s->crc = crc32(s->crc, (const Bytef *)buf, len); + + return (int)(len - s->stream.avail_in); +} + + +/* =========================================================================== + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). +*/ +#ifdef STDC +#include + +int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...) +{ + char buf[Z_PRINTF_BUFSIZE]; + va_list va; + int len; + + buf[sizeof(buf) - 1] = 0; + va_start(va, format); +#ifdef NO_vsnprintf +# ifdef HAS_vsprintf_void + (void)vsprintf(buf, format, va); + va_end(va); + for (len = 0; len < sizeof(buf); len++) + if (buf[len] == 0) break; +# else + len = vsprintf(buf, format, va); + va_end(va); +# endif +#else +# ifdef HAS_vsnprintf_void + (void)vsnprintf(buf, sizeof(buf), format, va); + va_end(va); + len = strlen(buf); +# else + len = vsnprintf(buf, sizeof(buf), format, va); + va_end(va); +# endif +#endif + if (len <= 0 || len >= (int)sizeof(buf) || buf[sizeof(buf) - 1] != 0) + return 0; + return gzwrite(file, buf, (unsigned)len); +} +#else /* not ANSI C */ + +int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) + gzFile file; + const char *format; + int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20; +{ + char buf[Z_PRINTF_BUFSIZE]; + int len; + + buf[sizeof(buf) - 1] = 0; +#ifdef NO_snprintf +# ifdef HAS_sprintf_void + sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + for (len = 0; len < sizeof(buf); len++) + if (buf[len] == 0) break; +# else + len = sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +# endif +#else +# ifdef HAS_snprintf_void + snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + len = strlen(buf); +# else + len = snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +# endif +#endif + if (len <= 0 || len >= sizeof(buf) || buf[sizeof(buf) - 1] != 0) + return 0; + return gzwrite(file, buf, len); +} +#endif + +/* =========================================================================== + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ +int ZEXPORT gzputc(file, c) + gzFile file; + int c; +{ + unsigned char cc = (unsigned char) c; /* required for big endian systems */ + + return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1; +} + + +/* =========================================================================== + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ +int ZEXPORT gzputs(file, s) + gzFile file; + const char *s; +{ + return gzwrite(file, __UNCONST(s), (unsigned)strlen(s)); +} + + +/* =========================================================================== + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. +*/ +local int do_flush (file, flush) + gzFile file; + int flush; +{ + uInt len; + int done = 0; + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; + + s->stream.avail_in = 0; /* should be zero already anyway */ + + for (;;) { + len = Z_BUFSIZE - s->stream.avail_out; + + if (len != 0) { + if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) { + s->z_err = Z_ERRNO; + return Z_ERRNO; + } + s->stream.next_out = s->outbuf; + s->stream.avail_out = Z_BUFSIZE; + } + if (done) break; + s->out += s->stream.avail_out; + s->z_err = deflate(&(s->stream), flush); + s->out -= s->stream.avail_out; + + /* Ignore the second of two consecutive flushes: */ + if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK; + + /* deflate has finished flushing only when it hasn't used up + * all the available space in the output buffer: + */ + done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END); + + if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break; + } + return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; +} + +int ZEXPORT gzflush (file, flush) + gzFile file; + int flush; +{ + gz_stream *s = (gz_stream*)file; + int err = do_flush (file, flush); + + if (err) return err; + fflush(s->file); + return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; +} +#endif /* NO_GZCOMPRESS */ + +/* =========================================================================== + Sets the starting position for the next gzread or gzwrite on the given + compressed file. The offset represents a number of bytes in the + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error. + SEEK_END is not implemented, returns error. + In this version of the library, gzseek can be extremely slow. +*/ +z_off_t ZEXPORT gzseek (file, offset, whence) + gzFile file; + z_off_t offset; + int whence; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || whence == SEEK_END || + s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) { + return -1L; + } + + if (s->mode == 'w') { +#ifdef NO_GZCOMPRESS + return -1L; +#else + if (whence == SEEK_SET) { + offset -= s->in; + } + if (offset < 0) return -1L; + + /* At this point, offset is the number of zero bytes to write. */ + if (s->inbuf == Z_NULL) { + s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */ + if (s->inbuf == Z_NULL) return -1L; + zmemzero(s->inbuf, Z_BUFSIZE); + } + while (offset > 0) { + uInt size = Z_BUFSIZE; + if (offset < Z_BUFSIZE) size = (uInt)offset; + + size = gzwrite(file, s->inbuf, size); + if (size == 0) return -1L; + + offset -= size; + } + return s->in; +#endif + } + /* Rest of function is for reading only */ + + /* compute absolute position */ + if (whence == SEEK_CUR) { + offset += s->out; + } + if (offset < 0) return -1L; + + if (s->transparent) { + /* map to fseek */ + s->back = EOF; + s->stream.avail_in = 0; + s->stream.next_in = s->inbuf; + if (fseek(s->file, offset, SEEK_SET) < 0) return -1L; + + s->in = s->out = offset; + return offset; + } + + /* For a negative seek, rewind and use positive seek */ + if (offset >= s->out) { + offset -= s->out; + } else if (gzrewind(file) < 0) { + return -1L; + } + /* offset is now the number of bytes to skip. */ + + if (offset != 0 && s->outbuf == Z_NULL) { + s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); + if (s->outbuf == Z_NULL) return -1L; + } + if (offset && s->back != EOF) { + s->back = EOF; + s->out++; + offset--; + if (s->last) s->z_err = Z_STREAM_END; + } + while (offset > 0) { + int size = Z_BUFSIZE; + if (offset < Z_BUFSIZE) size = (int)offset; + + size = gzread(file, s->outbuf, (uInt)size); + if (size <= 0) return -1L; + offset -= size; + } + return s->out; +} + +/* =========================================================================== + Rewinds input file. +*/ +int ZEXPORT gzrewind (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'r') return -1; + + s->z_err = Z_OK; + s->z_eof = 0; + s->back = EOF; + s->stream.avail_in = 0; + s->stream.next_in = s->inbuf; + s->crc = crc32(0L, Z_NULL, 0); + if (!s->transparent) (void)inflateReset(&s->stream); + s->in = 0; + s->out = 0; + return fseek(s->file, s->start, SEEK_SET); +} + +/* =========================================================================== + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. +*/ +z_off_t ZEXPORT gztell (file) + gzFile file; +{ + return gzseek(file, 0L, SEEK_CUR); +} + +/* =========================================================================== + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ +int ZEXPORT gzeof (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + /* With concatenated compressed files that can have embedded + * crc trailers, z_eof is no longer the only/best indicator of EOF + * on a gz_stream. Handle end-of-stream error explicitly here. + */ + if (s == NULL || s->mode != 'r') return 0; + if (s->z_eof) return 1; + return s->z_err == Z_STREAM_END; +} + +/* =========================================================================== + Returns 1 if reading and doing so transparently, otherwise zero. +*/ +int ZEXPORT gzdirect (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'r') return 0; + return s->transparent; +} + +#ifndef NO_GZCOMPRESS +/* =========================================================================== + Outputs a long in LSB order to the given file +*/ +local void putLong (file, x) + FILE *file; + uLong x; +{ + int n; + for (n = 0; n < 4; n++) { + fputc((int)(x & 0xff), file); + x >>= 8; + } +} +#endif + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets z_err in case + of error. +*/ +local uLong getLong (s) + gz_stream *s; +{ + uLong x = (uLong)get_byte(s); + int c; + + x += ((uLong)get_byte(s))<<8; + x += ((uLong)get_byte(s))<<16; + c = get_byte(s); + if (c == EOF) s->z_err = Z_DATA_ERROR; + x += ((uLong)c)<<24; + return x; +} + +/* =========================================================================== + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. +*/ +int ZEXPORT gzclose (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL) return Z_STREAM_ERROR; + + if (s->mode == 'w') { +#ifdef NO_GZCOMPRESS + return Z_STREAM_ERROR; +#else + if (do_flush (file, Z_FINISH) != Z_OK) + return destroy((gz_stream*)file); + + putLong (s->file, s->crc); + putLong (s->file, (uLong)(s->in & 0xffffffff)); +#endif + } + return destroy((gz_stream*)file); +} + +#ifdef STDC +# define zstrerror(errnum) strerror(errnum) +#else +# define zstrerror(errnum) "" +#endif + +/* =========================================================================== + Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ +const char * ZEXPORT gzerror (file, errnum) + gzFile file; + int *errnum; +{ + const char *m; + gz_stream *s = (gz_stream*)file; + + if (s == NULL) { + *errnum = Z_STREAM_ERROR; + return (const char*)ERR_MSG(Z_STREAM_ERROR); + } + *errnum = s->z_err; + if (*errnum == Z_OK) return (const char*)""; + + m = *errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg; + + if (m == NULL || *m == '\0') m = ERR_MSG(s->z_err); + + TRYFREE(s->msg); + s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3); + if (s->msg == Z_NULL) return ERR_MSG(Z_MEM_ERROR); + strcpy(s->msg, s->path); + strcat(s->msg, ": "); + strcat(s->msg, m); + return (const char*)s->msg; +} + +/* =========================================================================== + Clear the error and end-of-file flags, and do the same for the real file. +*/ +void ZEXPORT gzclearerr (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL) return; + if (s->z_err != Z_STREAM_END) s->z_err = Z_OK; + s->z_eof = 0; + clearerr(s->file); +} diff --git a/common/dist/zlib/infback.c b/common/dist/zlib/infback.c new file mode 100644 index 000000000..af697b764 --- /dev/null +++ b/common/dist/zlib/infback.c @@ -0,0 +1,625 @@ +/* $NetBSD: infback.c,v 1.2 2006/01/27 00:45:27 christos Exp $ */ + +/* infback.c -- inflate using a call-back interface + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + This code is largely copied from inflate.c. Normally either infback.o or + inflate.o would be linked into an application--not both. The interface + with inffast.c is retained so that optimized assembler-coded versions of + inflate_fast() can be used with either inflate.c or infback.c. + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +/* function prototypes */ +local void fixedtables OF((struct inflate_state FAR *state)); + +/* + strm provides memory allocation functions in zalloc and zfree, or + Z_NULL to use the library memory allocation functions. + + windowBits is in the range 8..15, and window is a user-supplied + window and output buffer that is 2**windowBits bytes. + */ +int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size) +z_streamp strm; +int windowBits; +unsigned char FAR *window; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL || window == Z_NULL || + windowBits < 8 || windowBits > 15) + return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; + } + if (strm->zfree == (free_func)0) strm->zfree = zcfree; + state = (struct inflate_state FAR *)ZALLOC(strm, 1, + sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (struct internal_state FAR *)state; + state->dmax = 32768U; + state->wbits = windowBits; + state->wsize = 1U << windowBits; + state->window = window; + state->write = 0; + state->whave = 0; + return Z_OK; +} + +/* + Return state with length and distance decoding tables and index sizes set to + fixed code decoding. Normally this returns fixed tables from inffixed.h. + If BUILDFIXED is defined, then instead this routine builds the tables the + first time it's called, and returns those tables the first time and + thereafter. This reduces the size of the code by about 2K bytes, in + exchange for a little execution time. However, BUILDFIXED should not be + used for threaded applications, since the rewriting of the tables and virgin + may not be thread-safe. + */ +local void fixedtables(state) +struct inflate_state FAR *state; +{ +#ifdef BUILDFIXED + static int virgin = 1; + static code *lenfix, *distfix; + static code fixed[544]; + + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + unsigned sym, bits; + static code *next; + + /* literal/length table */ + sym = 0; + while (sym < 144) state->lens[sym++] = 8; + while (sym < 256) state->lens[sym++] = 9; + while (sym < 280) state->lens[sym++] = 7; + while (sym < 288) state->lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); + + /* distance table */ + sym = 0; + while (sym < 32) state->lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); + + /* do this just once */ + virgin = 0; + } +#else /* !BUILDFIXED */ +# include "inffixed.h" +#endif /* BUILDFIXED */ + state->lencode = lenfix; + state->lenbits = 9; + state->distcode = distfix; + state->distbits = 5; +} + +/* Macros for inflateBack(): */ + +/* Load returned state from inflate_fast() */ +#define LOAD() \ + do { \ + put = strm->next_out; \ + left = strm->avail_out; \ + next = strm->next_in; \ + have = strm->avail_in; \ + hold = state->hold; \ + bits = state->bits; \ + } while (0) + +/* Set state from registers for inflate_fast() */ +#define RESTORE() \ + do { \ + strm->next_out = put; \ + strm->avail_out = left; \ + strm->next_in = next; \ + strm->avail_in = have; \ + state->hold = hold; \ + state->bits = bits; \ + } while (0) + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Assure that some input is available. If input is requested, but denied, + then return a Z_BUF_ERROR from inflateBack(). */ +#define PULL() \ + do { \ + if (have == 0) { \ + have = in(in_desc, &next); \ + if (have == 0) { \ + next = Z_NULL; \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflateBack() + with an error if there is no input available. */ +#define PULLBYTE() \ + do { \ + PULL(); \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflateBack() with + an error. */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n < 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Assure that some output space is available, by writing out the window + if it's full. If the write fails, return from inflateBack() with a + Z_BUF_ERROR. */ +#define ROOM() \ + do { \ + if (left == 0) { \ + put = state->window; \ + left = state->wsize; \ + state->whave = left; \ + if (out(out_desc, put, left)) { \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* + strm provides the memory allocation functions and window buffer on input, + and provides information on the unused input on return. For Z_DATA_ERROR + returns, strm will also provide an error message. + + in() and out() are the call-back input and output functions. When + inflateBack() needs more input, it calls in(). When inflateBack() has + filled the window with output, or when it completes with data in the + window, it calls out() to write out the data. The application must not + change the provided input until in() is called again or inflateBack() + returns. The application must not change the window/output buffer until + inflateBack() returns. + + in() and out() are called with a descriptor parameter provided in the + inflateBack() call. This parameter can be a structure that provides the + information required to do the read or write, as well as accumulated + information on the input and output such as totals and check values. + + in() should return zero on failure. out() should return non-zero on + failure. If either in() or out() fails, than inflateBack() returns a + Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it + was in() or out() that caused in the error. Otherwise, inflateBack() + returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format + error, or Z_MEM_ERROR if it could not allocate memory for the state. + inflateBack() can also return Z_STREAM_ERROR if the input parameters + are not correct, i.e. strm is Z_NULL or the state was not initialized. + */ +int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc) +z_streamp strm; +in_func in; +void FAR *in_desc; +out_func out; +void FAR *out_desc; +{ + struct inflate_state FAR *state; + unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have, left; /* available input and output */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code this; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + /* Check that the strm exists and that the state was initialized */ + if (strm == Z_NULL || strm->state == Z_NULL) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* Reset the state */ + strm->msg = Z_NULL; + state->mode = TYPE; + state->last = 0; + state->whave = 0; + next = strm->next_in; + have = next != Z_NULL ? strm->avail_in : 0; + hold = 0; + bits = 0; + put = state->window; + left = state->wsize; + + /* Inflate until end of block marked as last */ + for (;;) + switch (state->mode) { + case TYPE: + /* determine and dispatch block type */ + if (state->last) { + BYTEBITS(); + state->mode = DONE; + break; + } + NEEDBITS(3); + state->last = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); + state->mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); + state->mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); + state->mode = TABLE; + break; + case 3: + strm->msg = __UNCONST("invalid block type"); + state->mode = BAD; + } + DROPBITS(2); + break; + + case STORED: + /* get and verify stored block length */ + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = __UNCONST("invalid stored block lengths"); + state->mode = BAD; + break; + } + state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); + INITBITS(); + + /* copy stored block from input to output */ + while (state->length != 0) { + copy = state->length; + PULL(); + ROOM(); + if (copy > have) copy = have; + if (copy > left) copy = left; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + state->length -= copy; + } + Tracev((stderr, "inflate: stored end\n")); + state->mode = TYPE; + break; + + case TABLE: + /* get dynamic table entries descriptor */ + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); +#ifndef PKZIP_BUG_WORKAROUND + if (state->nlen > 286 || state->ndist > 30) { + strm->msg = __UNCONST("too many length or distance symbols"); + state->mode = BAD; + break; + } +#endif + Tracev((stderr, "inflate: table sizes ok\n")); + + /* get code length code lengths (not a typo) */ + state->have = 0; + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 7; + ret = inflate_table(CODES, state->lens, 19, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = __UNCONST("invalid code lengths set"); + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + + /* get length and distance code code lengths */ + state->have = 0; + while (state->have < state->nlen + state->ndist) { + for (;;) { + this = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.val < 16) { + NEEDBITS(this.bits); + DROPBITS(this.bits); + state->lens[state->have++] = this.val; + } + else { + if (this.val == 16) { + NEEDBITS(this.bits + 2); + DROPBITS(this.bits); + if (state->have == 0) { + strm->msg = __UNCONST("invalid bit length repeat"); + state->mode = BAD; + break; + } + len = (unsigned)(state->lens[state->have - 1]); + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (this.val == 17) { + NEEDBITS(this.bits + 3); + DROPBITS(this.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(this.bits + 7); + DROPBITS(this.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = __UNCONST("invalid bit length repeat"); + state->mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (state->mode == BAD) break; + + /* build code tables */ + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 9; + ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = __UNCONST("invalid literal/lengths set"); + state->mode = BAD; + break; + } + state->distcode = (code const FAR *)(state->next); + state->distbits = 6; + ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, + &(state->next), &(state->distbits), state->work); + if (ret) { + strm->msg = __UNCONST("invalid distances set"); + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + state->mode = LEN; + + case LEN: + /* use inflate_fast() if we have enough input and output */ + if (have >= 6 && left >= 258) { + RESTORE(); + if (state->whave < state->wsize) + state->whave = state->wsize - left; + inflate_fast(strm, state->wsize); + LOAD(); + break; + } + + /* get a literal, length, or end-of-block code */ + for (;;) { + this = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.op && (this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = state->lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + state->length = (unsigned)this.val; + + /* process literal */ + if (this.op == 0) { + Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", this.val)); + ROOM(); + *put++ = (unsigned char)(state->length); + left--; + state->mode = LEN; + break; + } + + /* process end of block */ + if (this.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + + /* invalid code */ + if (this.op & 64) { + strm->msg = __UNCONST("invalid literal/length code"); + state->mode = BAD; + break; + } + + /* length code -- get extra bits, if any */ + state->extra = (unsigned)(this.op) & 15; + if (state->extra != 0) { + NEEDBITS(state->extra); + state->length += BITS(state->extra); + DROPBITS(state->extra); + } + Tracevv((stderr, "inflate: length %u\n", state->length)); + + /* get distance code */ + for (;;) { + this = state->distcode[BITS(state->distbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if ((this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = state->distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + if (this.op & 64) { + strm->msg = __UNCONST("invalid distance code"); + state->mode = BAD; + break; + } + state->offset = (unsigned)this.val; + + /* get distance extra bits, if any */ + state->extra = (unsigned)(this.op) & 15; + if (state->extra != 0) { + NEEDBITS(state->extra); + state->offset += BITS(state->extra); + DROPBITS(state->extra); + } + if (state->offset > state->wsize - (state->whave < state->wsize ? + left : 0)) { + strm->msg = __UNCONST("invalid distance too far back"); + state->mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %u\n", state->offset)); + + /* copy match from window to output */ + do { + ROOM(); + copy = state->wsize - state->offset; + if (copy < left) { + from = put + copy; + copy = left - copy; + } + else { + from = put - state->offset; + copy = left; + } + if (copy > state->length) copy = state->length; + state->length -= copy; + left -= copy; + do { + *put++ = *from++; + } while (--copy); + } while (state->length != 0); + break; + + case DONE: + /* inflate stream terminated properly -- write leftover output */ + ret = Z_STREAM_END; + if (left < state->wsize) { + if (out(out_desc, state->window, state->wsize - left)) + ret = Z_BUF_ERROR; + } + goto inf_leave; + + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + + default: /* can't happen, but makes compilers happy */ + ret = Z_STREAM_ERROR; + goto inf_leave; + } + + /* Return unused input */ + inf_leave: + strm->next_in = next; + strm->avail_in = have; + return ret; +} + +int ZEXPORT inflateBackEnd(strm) +z_streamp strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} diff --git a/common/dist/zlib/inffast.c b/common/dist/zlib/inffast.c new file mode 100644 index 000000000..bd14e5d6b --- /dev/null +++ b/common/dist/zlib/inffast.c @@ -0,0 +1,320 @@ +/* $NetBSD: inffast.c,v 1.3 2006/01/27 00:45:27 christos Exp $ */ + +/* inffast.c -- fast decoding + * Copyright (C) 1995-2004 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +#ifndef ASMINF + +/* Allow machine dependent optimization for post-increment or pre-increment. + Based on testing to date, + Pre-increment preferred for: + - PowerPC G3 (Adler) + - MIPS R5000 (Randers-Pehrson) + Post-increment preferred for: + - none + No measurable difference: + - Pentium III (Anderson) + - M68060 (Nikl) + */ +#ifdef POSTINC +# define OFF 0 +# define PUP(a) *(a)++ +#else +# define OFF 1 +# define PUP(a) *++(a) +#endif + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ +void inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + unsigned char FAR *in; /* local strm->next_in */ + unsigned char FAR *last; /* while in < last, enough input available */ + unsigned char FAR *out; /* local strm->next_out */ + unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ + unsigned char FAR *end; /* while out < end, enough space available */ +#ifdef INFLATE_STRICT + unsigned dmax; /* maximum distance from zlib header */ +#endif + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned wwrite; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ + unsigned long hold; /* local strm->hold */ + unsigned bits; /* local strm->bits */ + code const FAR *lcode; /* local strm->lencode */ + code const FAR *dcode; /* local strm->distcode */ + unsigned lmask; /* mask for first level of length codes */ + unsigned dmask; /* mask for first level of distance codes */ + code this; /* retrieved table entry */ + unsigned op; /* code bits, operation, extra bits, or */ + /* window position, window bytes to copy */ + unsigned len; /* match length, unused bytes */ + unsigned dist; /* match distance */ + unsigned char FAR *from; /* where to copy match from */ + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + in = strm->next_in - OFF; + last = in + (strm->avail_in - 5); + out = strm->next_out - OFF; + beg = out - (start - strm->avail_out); + end = out + (strm->avail_out - 257); +#ifdef INFLATE_STRICT + dmax = state->dmax; +#endif + wsize = state->wsize; + whave = state->whave; + wwrite = state->write; + window = state->window; + hold = state->hold; + bits = state->bits; + lcode = state->lencode; + dcode = state->distcode; + lmask = (1U << state->lenbits) - 1; + dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + do { + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + this = lcode[hold & lmask]; + dolen: + op = (unsigned)(this.bits); + hold >>= op; + bits -= op; + op = (unsigned)(this.op); + if (op == 0) { /* literal */ + Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", this.val)); + PUP(out) = (unsigned char)(this.val); + } + else if (op & 16) { /* length base */ + len = (unsigned)(this.val); + op &= 15; /* number of extra bits */ + if (op) { + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + len += (unsigned)hold & ((1U << op) - 1); + hold >>= op; + bits -= op; + } + Tracevv((stderr, "inflate: length %u\n", len)); + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + this = dcode[hold & dmask]; + dodist: + op = (unsigned)(this.bits); + hold >>= op; + bits -= op; + op = (unsigned)(this.op); + if (op & 16) { /* distance base */ + dist = (unsigned)(this.val); + op &= 15; /* number of extra bits */ + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + } + dist += (unsigned)hold & ((1U << op) - 1); +#ifdef INFLATE_STRICT + if (dist > dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + hold >>= op; + bits -= op; + Tracevv((stderr, "inflate: distance %u\n", dist)); + op = (unsigned)(out - beg); /* max distance in output */ + if (dist > op) { /* see if copy from window */ + op = dist - op; /* distance back in window */ + if (op > whave) { + strm->msg = __UNCONST("invalid distance too far back"); + state->mode = BAD; + break; + } + from = window - OFF; + if (wwrite == 0) { /* very common case */ + from += wsize - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + else if (wwrite < op) { /* wrap around window */ + from += wsize + wwrite - op; + op -= wwrite; + if (op < len) { /* some from end of window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = window - OFF; + if (wwrite < len) { /* some from start of window */ + op = wwrite; + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + } + else { /* contiguous in window */ + from += wwrite - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + while (len > 2) { + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } + } + else { + from = out - dist; /* copy direct from output */ + do { /* minimum length is three */ + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } while (len > 2); + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } + } + } + else if ((op & 64) == 0) { /* 2nd level distance code */ + this = dcode[this.val + (hold & ((1U << op) - 1))]; + goto dodist; + } + else { + strm->msg = __UNCONST("invalid distance code"); + state->mode = BAD; + break; + } + } + else if ((op & 64) == 0) { /* 2nd level length code */ + this = lcode[this.val + (hold & ((1U << op) - 1))]; + goto dolen; + } + else if (op & 32) { /* end-of-block */ + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + else { + strm->msg = __UNCONST("invalid literal/length code"); + state->mode = BAD; + break; + } + } while (in < last && out < end); + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + len = bits >> 3; + in -= len; + bits -= len << 3; + hold &= (1U << bits) - 1; + + /* update state and return */ + strm->next_in = in + OFF; + strm->next_out = out + OFF; + strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); + strm->avail_out = (unsigned)(out < end ? + 257 + (end - out) : 257 - (out - end)); + state->hold = hold; + state->bits = bits; + return; +} + +/* + inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): + - Using bit fields for code structure + - Different op definition to avoid & for extra bits (do & for table bits) + - Three separate decoding do-loops for direct, window, and write == 0 + - Special case for distance > 1 copies to do overlapped load and store copy + - Explicit branch predictions (based on measured branch probabilities) + - Deferring match copy and interspersed it with decoding subsequent codes + - Swapping literal/length else + - Swapping window/direct else + - Larger unrolled copy loops (three is about right) + - Moving len -= 3 statement into middle of loop + */ + +#endif /* !ASMINF */ diff --git a/common/dist/zlib/inffast.h b/common/dist/zlib/inffast.h new file mode 100644 index 000000000..7a5be90eb --- /dev/null +++ b/common/dist/zlib/inffast.h @@ -0,0 +1,13 @@ +/* $NetBSD: inffast.h,v 1.1.1.1 2006/01/14 20:10:29 christos Exp $ */ + +/* inffast.h -- header to use inffast.c + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +void inflate_fast OF((z_streamp strm, unsigned start)); diff --git a/common/dist/zlib/inffixed.h b/common/dist/zlib/inffixed.h new file mode 100644 index 000000000..e1377b037 --- /dev/null +++ b/common/dist/zlib/inffixed.h @@ -0,0 +1,96 @@ +/* $NetBSD: inffixed.h,v 1.1.1.1 2006/01/14 20:10:26 christos Exp $ */ + + /* inffixed.h -- table for decoding fixed codes + * Generated automatically by makefixed(). + */ + + /* WARNING: this file should *not* be used by applications. It + is part of the implementation of the compression library and + is subject to change. Applications should only use zlib.h. + */ + + static const code lenfix[512] = { + {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, + {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, + {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, + {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, + {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, + {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, + {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, + {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, + {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, + {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, + {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, + {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, + {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, + {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, + {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, + {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, + {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, + {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, + {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, + {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, + {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, + {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, + {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, + {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, + {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, + {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, + {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, + {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, + {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, + {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, + {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, + {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, + {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, + {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, + {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, + {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, + {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, + {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, + {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, + {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, + {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, + {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, + {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, + {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, + {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, + {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, + {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, + {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, + {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, + {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, + {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, + {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, + {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, + {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, + {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, + {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, + {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, + {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, + {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, + {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, + {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, + {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, + {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, + {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, + {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, + {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, + {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, + {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, + {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, + {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, + {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, + {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, + {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, + {0,9,255} + }; + + static const code distfix[32] = { + {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, + {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, + {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, + {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, + {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, + {22,5,193},{64,5,0} + }; diff --git a/common/dist/zlib/inflate.c b/common/dist/zlib/inflate.c new file mode 100644 index 000000000..12461dc54 --- /dev/null +++ b/common/dist/zlib/inflate.c @@ -0,0 +1,1378 @@ +/* $NetBSD: inflate.c,v 1.4 2007/12/22 00:52:03 tsutsui Exp $ */ + +/* inflate.c -- zlib decompression + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * Change history: + * + * 1.2.beta0 24 Nov 2002 + * - First version -- complete rewrite of inflate to simplify code, avoid + * creation of window when not needed, minimize use of window when it is + * needed, make inffast.c even faster, implement gzip decoding, and to + * improve code readability and style over the previous zlib inflate code + * + * 1.2.beta1 25 Nov 2002 + * - Use pointers for available input and output checking in inffast.c + * - Remove input and output counters in inffast.c + * - Change inffast.c entry and loop from avail_in >= 7 to >= 6 + * - Remove unnecessary second byte pull from length extra in inffast.c + * - Unroll direct copy to three copies per loop in inffast.c + * + * 1.2.beta2 4 Dec 2002 + * - Change external routine names to reduce potential conflicts + * - Correct filename to inffixed.h for fixed tables in inflate.c + * - Make hbuf[] unsigned char to match parameter type in inflate.c + * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset) + * to avoid negation problem on Alphas (64 bit) in inflate.c + * + * 1.2.beta3 22 Dec 2002 + * - Add comments on state->bits assertion in inffast.c + * - Add comments on op field in inftrees.h + * - Fix bug in reuse of allocated window after inflateReset() + * - Remove bit fields--back to byte structure for speed + * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths + * - Change post-increments to pre-increments in inflate_fast(), PPC biased? + * - Add compile time option, POSTINC, to use post-increments instead (Intel?) + * - Make MATCH copy in inflate() much faster for when inflate_fast() not used + * - Use local copies of stream next and avail values, as well as local bit + * buffer and bit count in inflate()--for speed when inflate_fast() not used + * + * 1.2.beta4 1 Jan 2003 + * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings + * - Move a comment on output buffer sizes from inffast.c to inflate.c + * - Add comments in inffast.c to introduce the inflate_fast() routine + * - Rearrange window copies in inflate_fast() for speed and simplification + * - Unroll last copy for window match in inflate_fast() + * - Use local copies of window variables in inflate_fast() for speed + * - Pull out common write == 0 case for speed in inflate_fast() + * - Make op and len in inflate_fast() unsigned for consistency + * - Add FAR to lcode and dcode declarations in inflate_fast() + * - Simplified bad distance check in inflate_fast() + * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new + * source file infback.c to provide a call-back interface to inflate for + * programs like gzip and unzip -- uses window as output buffer to avoid + * window copying + * + * 1.2.beta5 1 Jan 2003 + * - Improved inflateBack() interface to allow the caller to provide initial + * input in strm. + * - Fixed stored blocks bug in inflateBack() + * + * 1.2.beta6 4 Jan 2003 + * - Added comments in inffast.c on effectiveness of POSTINC + * - Typecasting all around to reduce compiler warnings + * - Changed loops from while (1) or do {} while (1) to for (;;), again to + * make compilers happy + * - Changed type of window in inflateBackInit() to unsigned char * + * + * 1.2.beta7 27 Jan 2003 + * - Changed many types to unsigned or unsigned short to avoid warnings + * - Added inflateCopy() function + * + * 1.2.0 9 Mar 2003 + * - Changed inflateBack() interface to provide separate opaque descriptors + * for the in() and out() functions + * - Changed inflateBack() argument and in_func typedef to swap the length + * and buffer address return values for the input function + * - Check next_in and next_out for Z_NULL on entry to inflate() + * + * The history for versions after 1.2.0 are in ChangeLog in zlib distribution. + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +#ifdef MAKEFIXED +# ifndef BUILDFIXED +# define BUILDFIXED +# endif +#endif + +/* function prototypes */ +local void fixedtables OF((struct inflate_state FAR *state)); +local int updatewindow OF((z_streamp strm, unsigned out)); +#ifdef BUILDFIXED + void makefixed OF((void)); +#endif +local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf, + unsigned len)); + +int ZEXPORT inflateReset(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + strm->total_in = strm->total_out = state->total = 0; + strm->msg = Z_NULL; + strm->adler = 1; /* to support ill-conceived Java test suite */ + state->mode = HEAD; + state->last = 0; + state->havedict = 0; + state->dmax = 32768U; + state->head = Z_NULL; + state->wsize = 0; + state->whave = 0; + state->write = 0; + state->hold = 0; + state->bits = 0; + state->lencode = state->distcode = state->next = state->codes; + Tracev((stderr, "inflate: reset\n")); + return Z_OK; +} + +int ZEXPORT inflatePrime(strm, bits, value) +z_streamp strm; +int bits; +int value; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR; + value &= (1L << bits) - 1; + state->hold += value << state->bits; + state->bits += bits; + return Z_OK; +} + +int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) +z_streamp strm; +int windowBits; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL) return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; + } + if (strm->zfree == (free_func)0) strm->zfree = zcfree; + state = (struct inflate_state FAR *) + ZALLOC(strm, 1, sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (struct internal_state FAR *)state; + if (windowBits < 0) { + state->wrap = 0; + windowBits = -windowBits; + } + else { + state->wrap = (windowBits >> 4) + 1; +#ifdef GUNZIP + if (windowBits < 48) windowBits &= 15; +#endif + } + if (windowBits < 8 || windowBits > 15) { + ZFREE(strm, state); + strm->state = Z_NULL; + return Z_STREAM_ERROR; + } + state->wbits = (unsigned)windowBits; + state->window = Z_NULL; + return inflateReset(strm); +} + +int ZEXPORT inflateInit_(strm, version, stream_size) +z_streamp strm; +const char *version; +int stream_size; +{ + return inflateInit2_(strm, DEF_WBITS, version, stream_size); +} + +/* + Return state with length and distance decoding tables and index sizes set to + fixed code decoding. Normally this returns fixed tables from inffixed.h. + If BUILDFIXED is defined, then instead this routine builds the tables the + first time it's called, and returns those tables the first time and + thereafter. This reduces the size of the code by about 2K bytes, in + exchange for a little execution time. However, BUILDFIXED should not be + used for threaded applications, since the rewriting of the tables and virgin + may not be thread-safe. + */ +local void fixedtables(state) +struct inflate_state FAR *state; +{ +#ifdef BUILDFIXED + static int virgin = 1; + static code *lenfix, *distfix; + static code fixed[544]; + + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + unsigned sym, bits; + static code *next; + + /* literal/length table */ + sym = 0; + while (sym < 144) state->lens[sym++] = 8; + while (sym < 256) state->lens[sym++] = 9; + while (sym < 280) state->lens[sym++] = 7; + while (sym < 288) state->lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); + + /* distance table */ + sym = 0; + while (sym < 32) state->lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); + + /* do this just once */ + virgin = 0; + } +#else /* !BUILDFIXED */ +# include "inffixed.h" +#endif /* BUILDFIXED */ + state->lencode = lenfix; + state->lenbits = 9; + state->distcode = distfix; + state->distbits = 5; +} + +#ifdef MAKEFIXED +#include + +/* + Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also + defines BUILDFIXED, so the tables are built on the fly. makefixed() writes + those tables to stdout, which would be piped to inffixed.h. A small program + can simply call makefixed to do this: + + void makefixed(void); + + int main(void) + { + makefixed(); + return 0; + } + + Then that can be linked with zlib built with MAKEFIXED defined and run: + + a.out > inffixed.h + */ +void makefixed() +{ + unsigned low, size; + struct inflate_state state; + + fixedtables(&state); + puts(" /* inffixed.h -- table for decoding fixed codes"); + puts(" * Generated automatically by makefixed()."); + puts(" */"); + puts(""); + puts(" /* WARNING: this file should *not* be used by applications."); + puts(" It is part of the implementation of this library and is"); + puts(" subject to change. Applications should only use zlib.h."); + puts(" */"); + puts(""); + size = 1U << 9; + printf(" static const code lenfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 7) == 0) printf("\n "); + printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits, + state.lencode[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); + size = 1U << 5; + printf("\n static const code distfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 6) == 0) printf("\n "); + printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits, + state.distcode[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); +} +#endif /* MAKEFIXED */ + +/* + Update the window with the last wsize (normally 32K) bytes written before + returning. If window does not exist yet, create it. This is only called + when a window is already in use, or when output has been written during this + inflate call, but the end of the deflate stream has not been reached yet. + It is also called to create a window for dictionary data when a dictionary + is loaded. + + Providing output buffers larger than 32K to inflate() should provide a speed + advantage, since only the last 32K of output is copied to the sliding window + upon return from inflate(), and since all distances after the first 32K of + output will fall in the output data, making match copies simpler and faster. + The advantage may be dependent on the size of the processor's data caches. + */ +local int updatewindow(strm, out) +z_streamp strm; +unsigned out; +{ + struct inflate_state FAR *state; + unsigned copy, dist; + + state = (struct inflate_state FAR *)strm->state; + + /* if it hasn't been done already, allocate space for the window */ + if (state->window == Z_NULL) { + state->window = (unsigned char FAR *) + ZALLOC(strm, 1U << state->wbits, + sizeof(unsigned char)); + if (state->window == Z_NULL) return 1; + } + + /* if window not in use yet, initialize */ + if (state->wsize == 0) { + state->wsize = 1U << state->wbits; + state->write = 0; + state->whave = 0; + } + + /* copy state->wsize or less output bytes into the circular window */ + copy = out - strm->avail_out; + if (copy >= state->wsize) { + zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); + state->write = 0; + state->whave = state->wsize; + } + else { + dist = state->wsize - state->write; + if (dist > copy) dist = copy; + zmemcpy(state->window + state->write, strm->next_out - copy, dist); + copy -= dist; + if (copy) { + zmemcpy(state->window, strm->next_out - copy, copy); + state->write = copy; + state->whave = state->wsize; + } + else { + state->write += dist; + if (state->write == state->wsize) state->write = 0; + if (state->whave < state->wsize) state->whave += dist; + } + } + return 0; +} + +/* Macros for inflate(): */ + +/* check function to use adler32() for zlib or crc32() for gzip */ +#ifdef GUNZIP +# define UPDATE(check, buf, len) \ + (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) +#else +# define UPDATE(check, buf, len) adler32(check, buf, len) +#endif + +/* check macros for header crc */ +#ifdef GUNZIP +# define CRC2(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + check = crc32(check, hbuf, 2); \ + } while (0) + +# define CRC4(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + hbuf[2] = (unsigned char)((word) >> 16); \ + hbuf[3] = (unsigned char)((word) >> 24); \ + check = crc32(check, hbuf, 4); \ + } while (0) +#endif + +/* Load registers with state in inflate() for speed */ +#define LOAD() \ + do { \ + put = strm->next_out; \ + left = strm->avail_out; \ + next = strm->next_in; \ + have = strm->avail_in; \ + hold = state->hold; \ + bits = state->bits; \ + } while (0) + +/* Restore state from registers in inflate() */ +#define RESTORE() \ + do { \ + strm->next_out = put; \ + strm->avail_out = left; \ + strm->next_in = next; \ + strm->avail_in = have; \ + state->hold = hold; \ + state->bits = bits; \ + } while (0) + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflate() + if there is no input available. */ +#define PULLBYTE() \ + do { \ + if (have == 0) goto inf_leave; \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflate(). */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n < 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Reverse the bytes in a 32-bit value */ +#define REVERSE(q) \ + ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ + (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) + +/* + inflate() uses a state machine to process as much input data and generate as + much output data as possible before returning. The state machine is + structured roughly as follows: + + for (;;) switch (state) { + ... + case STATEn: + if (not enough input data or output space to make progress) + return; + ... make progress ... + state = STATEm; + break; + ... + } + + so when inflate() is called again, the same case is attempted again, and + if the appropriate resources are provided, the machine proceeds to the + next state. The NEEDBITS() macro is usually the way the state evaluates + whether it can proceed or should return. NEEDBITS() does the return if + the requested bits are not available. The typical use of the BITS macros + is: + + NEEDBITS(n); + ... do something with BITS(n) ... + DROPBITS(n); + + where NEEDBITS(n) either returns from inflate() if there isn't enough + input left to load n bits into the accumulator, or it continues. BITS(n) + gives the low n bits in the accumulator. When done, DROPBITS(n) drops + the low n bits off the accumulator. INITBITS() clears the accumulator + and sets the number of available bits to zero. BYTEBITS() discards just + enough bits to put the accumulator on a byte boundary. After BYTEBITS() + and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. + + NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return + if there is no input available. The decoding of variable length codes uses + PULLBYTE() directly in order to pull just enough bytes to decode the next + code, and no more. + + Some states loop until they get enough input, making sure that enough + state information is maintained to continue the loop where it left off + if NEEDBITS() returns in the loop. For example, want, need, and keep + would all have to actually be part of the saved state in case NEEDBITS() + returns: + + case STATEw: + while (want < need) { + NEEDBITS(n); + keep[want++] = BITS(n); + DROPBITS(n); + } + state = STATEx; + case STATEx: + + As shown above, if the next state is also the next case, then the break + is omitted. + + A state may also return if there is not enough output space available to + complete that state. Those states are copying stored data, writing a + literal byte, and copying a matching string. + + When returning, a "goto inf_leave" is used to update the total counters, + update the check value, and determine whether any progress has been made + during that inflate() call in order to return the proper return code. + Progress is defined as a change in either strm->avail_in or strm->avail_out. + When there is a window, goto inf_leave will update the window with the last + output written. If a goto inf_leave occurs in the middle of decompression + and there is no window currently, goto inf_leave will create one and copy + output to the window for the next call of inflate(). + + In this implementation, the flush parameter of inflate() only affects the + return code (per zlib.h). inflate() always writes as much as possible to + strm->next_out, given the space available and the provided input--the effect + documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers + the allocation of and copying into a sliding window until necessary, which + provides the effect documented in zlib.h for Z_FINISH when the entire input + stream available. So the only thing the flush parameter actually does is: + when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it + will return Z_BUF_ERROR if it has not reached the end of the stream. + */ + +int ZEXPORT inflate(strm, flush) +z_streamp strm; +int flush; +{ + struct inflate_state FAR *state; + unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have, left; /* available input and output */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned in, out; /* save starting available input and output */ + unsigned copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code this; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ +#ifdef GUNZIP + unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ +#endif + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + +#if defined(__NetBSD__) && defined(_STANDALONE) + /* Some kernels are loaded at address 0x0 so strm->next_out could be NULL */ + if (strm == Z_NULL || strm->state == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0)) + return Z_STREAM_ERROR; +#else + if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0)) + return Z_STREAM_ERROR; +#endif + + state = (struct inflate_state FAR *)strm->state; + if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ + LOAD(); + in = have; + out = left; + ret = Z_OK; + for (;;) + switch (state->mode) { + case HEAD: + if (state->wrap == 0) { + state->mode = TYPEDO; + break; + } + NEEDBITS(16); +#ifdef GUNZIP + if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ + state->check = crc32(0L, Z_NULL, 0); + CRC2(state->check, hold); + INITBITS(); + state->mode = FLAGS; + break; + } + state->flags = 0; /* expect zlib header */ + if (state->head != Z_NULL) + state->head->done = -1; + if (!(state->wrap & 1) || /* check if zlib header allowed */ +#else + if ( +#endif + ((BITS(8) << 8) + (hold >> 8)) % 31) { + strm->msg = __UNCONST("incorrect header check"); + state->mode = BAD; + break; + } + if (BITS(4) != Z_DEFLATED) { + strm->msg = __UNCONST("unknown compression method"); + state->mode = BAD; + break; + } + DROPBITS(4); + len = BITS(4) + 8; + if (len > state->wbits) { + strm->msg = __UNCONST("invalid window size"); + state->mode = BAD; + break; + } + state->dmax = 1U << len; + Tracev((stderr, "inflate: zlib header ok\n")); + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = hold & 0x200 ? DICTID : TYPE; + INITBITS(); + break; +#ifdef GUNZIP + case FLAGS: + NEEDBITS(16); + state->flags = (int)(hold); + if ((state->flags & 0xff) != Z_DEFLATED) { + strm->msg = __UNCONST("unknown compression method"); + state->mode = BAD; + break; + } + if (state->flags & 0xe000) { + strm->msg = __UNCONST("unknown header flags set"); + state->mode = BAD; + break; + } + if (state->head != Z_NULL) + state->head->text = (int)((hold >> 8) & 1); + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = TIME; + case TIME: + NEEDBITS(32); + if (state->head != Z_NULL) + state->head->time = hold; + if (state->flags & 0x0200) CRC4(state->check, hold); + INITBITS(); + state->mode = OS; + case OS: + NEEDBITS(16); + if (state->head != Z_NULL) { + state->head->xflags = (int)(hold & 0xff); + state->head->os = (int)(hold >> 8); + } + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = EXLEN; + case EXLEN: + if (state->flags & 0x0400) { + NEEDBITS(16); + state->length = (unsigned)(hold); + if (state->head != Z_NULL) + state->head->extra_len = (unsigned)hold; + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + } + else if (state->head != Z_NULL) + state->head->extra = Z_NULL; + state->mode = EXTRA; + case EXTRA: + if (state->flags & 0x0400) { + copy = state->length; + if (copy > have) copy = have; + if (copy) { + if (state->head != Z_NULL && + state->head->extra != Z_NULL) { + len = state->head->extra_len - state->length; + Assert (next != NULL, "next is null"); + zmemcpy(state->head->extra + len, next, + len + copy > state->head->extra_max ? + state->head->extra_max - len : copy); + } + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + state->length -= copy; + } + if (state->length) goto inf_leave; + } + state->length = 0; + state->mode = NAME; + case NAME: + if (state->flags & 0x0800) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->name != Z_NULL && + state->length < state->head->name_max) + state->head->name[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->name = Z_NULL; + state->length = 0; + state->mode = COMMENT; + case COMMENT: + if (state->flags & 0x1000) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->comment != Z_NULL && + state->length < state->head->comm_max) + state->head->comment[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->comment = Z_NULL; + state->mode = HCRC; + case HCRC: + if (state->flags & 0x0200) { + NEEDBITS(16); + if (hold != (state->check & 0xffff)) { + strm->msg = __UNCONST("header crc mismatch"); + state->mode = BAD; + break; + } + INITBITS(); + } + if (state->head != Z_NULL) { + state->head->hcrc = (int)((state->flags >> 9) & 1); + state->head->done = 1; + } + strm->adler = state->check = crc32(0L, Z_NULL, 0); + state->mode = TYPE; + break; +#endif + case DICTID: + NEEDBITS(32); + strm->adler = state->check = REVERSE(hold); + INITBITS(); + state->mode = DICT; + case DICT: + if (state->havedict == 0) { + RESTORE(); + return Z_NEED_DICT; + } + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = TYPE; + case TYPE: + if (flush == Z_BLOCK) goto inf_leave; + case TYPEDO: + if (state->last) { + BYTEBITS(); + state->mode = CHECK; + break; + } + NEEDBITS(3); + state->last = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); + state->mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); + state->mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); + state->mode = TABLE; + break; + case 3: + strm->msg = __UNCONST("invalid block type"); + state->mode = BAD; + } + DROPBITS(2); + break; + case STORED: + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = __UNCONST("invalid stored block lengths"); + state->mode = BAD; + break; + } + state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); + INITBITS(); + state->mode = COPY; + case COPY: + copy = state->length; + if (copy) { + if (copy > have) copy = have; + if (copy > left) copy = left; + if (copy == 0) goto inf_leave; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + state->length -= copy; + break; + } + Tracev((stderr, "inflate: stored end\n")); + state->mode = TYPE; + break; + case TABLE: + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); +#ifndef PKZIP_BUG_WORKAROUND + if (state->nlen > 286 || state->ndist > 30) { + strm->msg = __UNCONST("too many length or distance symbols"); + state->mode = BAD; + break; + } +#endif + Tracev((stderr, "inflate: table sizes ok\n")); + state->have = 0; + state->mode = LENLENS; + case LENLENS: + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 7; + ret = inflate_table(CODES, state->lens, 19, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = __UNCONST("invalid code lengths set"); + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + state->have = 0; + state->mode = CODELENS; + case CODELENS: + while (state->have < state->nlen + state->ndist) { + for (;;) { + this = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.val < 16) { + NEEDBITS(this.bits); + DROPBITS(this.bits); + state->lens[state->have++] = this.val; + } + else { + if (this.val == 16) { + NEEDBITS(this.bits + 2); + DROPBITS(this.bits); + if (state->have == 0) { + strm->msg = __UNCONST("invalid bit length repeat"); + state->mode = BAD; + break; + } + len = state->lens[state->have - 1]; + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (this.val == 17) { + NEEDBITS(this.bits + 3); + DROPBITS(this.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(this.bits + 7); + DROPBITS(this.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = __UNCONST("invalid bit length repeat"); + state->mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (state->mode == BAD) break; + + /* build code tables */ + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 9; + ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = __UNCONST("invalid literal/lengths set"); + state->mode = BAD; + break; + } + state->distcode = (code const FAR *)(state->next); + state->distbits = 6; + ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, + &(state->next), &(state->distbits), state->work); + if (ret) { + strm->msg = __UNCONST("invalid distances set"); + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + state->mode = LEN; + case LEN: + if (have >= 6 && left >= 258) { + RESTORE(); + inflate_fast(strm, out); + LOAD(); + break; + } + for (;;) { + this = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.op && (this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = state->lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + state->length = (unsigned)this.val; + if ((int)(this.op) == 0) { + Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", this.val)); + state->mode = LIT; + break; + } + if (this.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + if (this.op & 64) { + strm->msg = __UNCONST("invalid literal/length code"); + state->mode = BAD; + break; + } + state->extra = (unsigned)(this.op) & 15; + state->mode = LENEXT; + case LENEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->length += BITS(state->extra); + DROPBITS(state->extra); + } + Tracevv((stderr, "inflate: length %u\n", state->length)); + state->mode = DIST; + case DIST: + for (;;) { + this = state->distcode[BITS(state->distbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if ((this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = state->distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + if (this.op & 64) { + strm->msg = __UNCONST("invalid distance code"); + state->mode = BAD; + break; + } + state->offset = (unsigned)this.val; + state->extra = (unsigned)(this.op) & 15; + state->mode = DISTEXT; + case DISTEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->offset += BITS(state->extra); + DROPBITS(state->extra); + } +#ifdef INFLATE_STRICT + if (state->offset > state->dmax) { + strm->msg = __UNCONST("invalid distance too far back"); + state->mode = BAD; + break; + } +#endif + if (state->offset > state->whave + out - left) { + strm->msg = __UNCONST("invalid distance too far back"); + state->mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %u\n", state->offset)); + state->mode = MATCH; + case MATCH: + if (left == 0) goto inf_leave; + copy = out - left; + if (state->offset > copy) { /* copy from window */ + copy = state->offset - copy; + if (copy > state->write) { + copy -= state->write; + from = state->window + (state->wsize - copy); + } + else + from = state->window + (state->write - copy); + if (copy > state->length) copy = state->length; + } + else { /* copy from output */ + from = put - state->offset; + copy = state->length; + } + if (copy > left) copy = left; + left -= copy; + state->length -= copy; + do { + *put++ = *from++; + } while (--copy); + if (state->length == 0) state->mode = LEN; + break; + case LIT: + if (left == 0) goto inf_leave; + *put++ = (unsigned char)(state->length); + left--; + state->mode = LEN; + break; + case CHECK: + if (state->wrap) { + NEEDBITS(32); + out -= left; + strm->total_out += out; + state->total += out; + if (out) + strm->adler = state->check = + UPDATE(state->check, put - out, out); + out = left; + if (( +#ifdef GUNZIP + state->flags ? hold : +#endif + REVERSE(hold)) != state->check) { + strm->msg = __UNCONST("incorrect data check"); + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: check matches trailer\n")); + } +#ifdef GUNZIP + state->mode = LENGTH; + case LENGTH: + if (state->wrap && state->flags) { + NEEDBITS(32); + if (hold != (state->total & 0xffffffffUL)) { + strm->msg = __UNCONST("incorrect length check"); + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: length matches trailer\n")); + } +#endif + state->mode = DONE; + case DONE: + ret = Z_STREAM_END; + goto inf_leave; + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + case MEM: + return Z_MEM_ERROR; + case SYNC: + default: + return Z_STREAM_ERROR; + } + + /* + Return from inflate(), updating the total counts and the check value. + If there was no progress during the inflate() call, return a buffer + error. Call updatewindow() to create and/or update the window state. + Note: a memory error from inflate() is non-recoverable. + */ + inf_leave: + RESTORE(); + if (state->wsize || (state->mode < CHECK && out != strm->avail_out)) + if (updatewindow(strm, out)) { + state->mode = MEM; + return Z_MEM_ERROR; + } + in -= strm->avail_in; + out -= strm->avail_out; + strm->total_in += in; + strm->total_out += out; + state->total += out; + if (state->wrap && out) + strm->adler = state->check = + UPDATE(state->check, strm->next_out - out, out); + strm->data_type = state->bits + (state->last ? 64 : 0) + + (state->mode == TYPE ? 128 : 0); + if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) + ret = Z_BUF_ERROR; + return ret; +} + +int ZEXPORT inflateEnd(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (state->window != Z_NULL) ZFREE(strm, state->window); + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} + +int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength) +z_streamp strm; +const Bytef *dictionary; +uInt dictLength; +{ + struct inflate_state FAR *state; + unsigned long id; + + /* check state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (state->wrap != 0 && state->mode != DICT) + return Z_STREAM_ERROR; + + /* check for correct dictionary id */ + if (state->mode == DICT) { + id = adler32(0L, Z_NULL, 0); + id = adler32(id, dictionary, dictLength); + if (id != state->check) + return Z_DATA_ERROR; + } + + /* copy dictionary to window */ + if (updatewindow(strm, strm->avail_out)) { + state->mode = MEM; + return Z_MEM_ERROR; + } + if (dictLength > state->wsize) { + zmemcpy(state->window, dictionary + dictLength - state->wsize, + state->wsize); + state->whave = state->wsize; + } + else { + zmemcpy(state->window + state->wsize - dictLength, dictionary, + dictLength); + state->whave = dictLength; + } + state->havedict = 1; + Tracev((stderr, "inflate: dictionary set\n")); + return Z_OK; +} + +int ZEXPORT inflateGetHeader(strm, head) +z_streamp strm; +gz_headerp head; +{ + struct inflate_state FAR *state; + + /* check state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if ((state->wrap & 2) == 0) return Z_STREAM_ERROR; + + /* save header structure */ + state->head = head; + head->done = 0; + return Z_OK; +} + +/* + Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found + or when out of input. When called, *have is the number of pattern bytes + found in order so far, in 0..3. On return *have is updated to the new + state. If on return *have equals four, then the pattern was found and the + return value is how many bytes were read including the last byte of the + pattern. If *have is less than four, then the pattern has not been found + yet and the return value is len. In the latter case, syncsearch() can be + called again with more data and the *have state. *have is initialized to + zero for the first call. + */ +local unsigned syncsearch(have, buf, len) +unsigned FAR *have; +unsigned char FAR *buf; +unsigned len; +{ + unsigned got; + unsigned next; + + got = *have; + next = 0; + while (next < len && got < 4) { + if ((int)(buf[next]) == (got < 2 ? 0 : 0xff)) + got++; + else if (buf[next]) + got = 0; + else + got = 4 - got; + next++; + } + *have = got; + return next; +} + +int ZEXPORT inflateSync(strm) +z_streamp strm; +{ + unsigned len; /* number of bytes to look at or looked at */ + unsigned long in, out; /* temporary to save total_in and total_out */ + unsigned char buf[4]; /* to restore bit buffer to byte string */ + struct inflate_state FAR *state; + + /* check parameters */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR; + + /* if first time, start search in bit buffer */ + if (state->mode != SYNC) { + state->mode = SYNC; + state->hold <<= state->bits & 7; + state->bits -= state->bits & 7; + len = 0; + while (state->bits >= 8) { + buf[len++] = (unsigned char)(state->hold); + state->hold >>= 8; + state->bits -= 8; + } + state->have = 0; + syncsearch(&(state->have), buf, len); + } + + /* search available input */ + len = syncsearch(&(state->have), strm->next_in, strm->avail_in); + strm->avail_in -= len; + strm->next_in += len; + strm->total_in += len; + + /* return no joy or set up to restart inflate() on a new block */ + if (state->have != 4) return Z_DATA_ERROR; + in = strm->total_in; out = strm->total_out; + inflateReset(strm); + strm->total_in = in; strm->total_out = out; + state->mode = TYPE; + return Z_OK; +} + +/* + Returns true if inflate is currently at the end of a block generated by + Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP + implementation to provide an additional safety check. PPP uses + Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored + block. When decompressing, PPP checks that at the end of input packet, + inflate is waiting for these length bytes. + */ +int ZEXPORT inflateSyncPoint(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + return state->mode == STORED && state->bits == 0; +} + +int ZEXPORT inflateCopy(dest, source) +z_streamp dest; +z_streamp source; +{ + struct inflate_state FAR *state; + struct inflate_state FAR *copy; + unsigned char FAR *window; + unsigned wsize; + + /* check input */ + if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL || + source->zalloc == (alloc_func)0 || source->zfree == (free_func)0) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)source->state; + + /* allocate space */ + copy = (struct inflate_state FAR *) + ZALLOC(source, 1, sizeof(struct inflate_state)); + if (copy == Z_NULL) return Z_MEM_ERROR; + window = Z_NULL; + if (state->window != Z_NULL) { + window = (unsigned char FAR *) + ZALLOC(source, 1U << state->wbits, sizeof(unsigned char)); + if (window == Z_NULL) { + ZFREE(source, copy); + return Z_MEM_ERROR; + } + } + + /* copy state */ + zmemcpy(dest, source, sizeof(z_stream)); + zmemcpy(copy, state, sizeof(struct inflate_state)); + if (state->lencode >= state->codes && + state->lencode <= state->codes + ENOUGH - 1) { + copy->lencode = copy->codes + (state->lencode - state->codes); + copy->distcode = copy->codes + (state->distcode - state->codes); + } + copy->next = copy->codes + (state->next - state->codes); + if (window != Z_NULL) { + wsize = 1U << state->wbits; + zmemcpy(window, state->window, wsize); + } + copy->window = window; + dest->state = (struct internal_state FAR *)copy; + return Z_OK; +} diff --git a/common/dist/zlib/inflate.h b/common/dist/zlib/inflate.h new file mode 100644 index 000000000..9a08f2560 --- /dev/null +++ b/common/dist/zlib/inflate.h @@ -0,0 +1,117 @@ +/* $NetBSD: inflate.h,v 1.1.1.1 2006/01/14 20:10:31 christos Exp $ */ + +/* inflate.h -- internal inflate state definition + * Copyright (C) 1995-2004 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* define NO_GZIP when compiling if you want to disable gzip header and + trailer decoding by inflate(). NO_GZIP would be used to avoid linking in + the crc code when it is not needed. For shared libraries, gzip decoding + should be left enabled. */ +#ifndef NO_GZIP +# define GUNZIP +#endif + +/* Possible inflate modes between inflate() calls */ +typedef enum { + HEAD, /* i: waiting for magic header */ + FLAGS, /* i: waiting for method and flags (gzip) */ + TIME, /* i: waiting for modification time (gzip) */ + OS, /* i: waiting for extra flags and operating system (gzip) */ + EXLEN, /* i: waiting for extra length (gzip) */ + EXTRA, /* i: waiting for extra bytes (gzip) */ + NAME, /* i: waiting for end of file name (gzip) */ + COMMENT, /* i: waiting for end of comment (gzip) */ + HCRC, /* i: waiting for header crc (gzip) */ + DICTID, /* i: waiting for dictionary check value */ + DICT, /* waiting for inflateSetDictionary() call */ + TYPE, /* i: waiting for type bits, including last-flag bit */ + TYPEDO, /* i: same, but skip check to exit inflate on new block */ + STORED, /* i: waiting for stored size (length and complement) */ + COPY, /* i/o: waiting for input or output to copy stored block */ + TABLE, /* i: waiting for dynamic block table lengths */ + LENLENS, /* i: waiting for code length code lengths */ + CODELENS, /* i: waiting for length/lit and distance code lengths */ + LEN, /* i: waiting for length/lit code */ + LENEXT, /* i: waiting for length extra bits */ + DIST, /* i: waiting for distance code */ + DISTEXT, /* i: waiting for distance extra bits */ + MATCH, /* o: waiting for output space to copy string */ + LIT, /* o: waiting for output space to write literal */ + CHECK, /* i: waiting for 32-bit check value */ + LENGTH, /* i: waiting for 32-bit length (gzip) */ + DONE, /* finished check, done -- remain here until reset */ + BAD, /* got a data error -- remain here until reset */ + MEM, /* got an inflate() memory error -- remain here until reset */ + SYNC /* looking for synchronization bytes to restart inflate() */ +} inflate_mode; + +/* + State transitions between above modes - + + (most modes can go to the BAD or MEM mode -- not shown for clarity) + + Process header: + HEAD -> (gzip) or (zlib) + (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME + NAME -> COMMENT -> HCRC -> TYPE + (zlib) -> DICTID or TYPE + DICTID -> DICT -> TYPE + Read deflate blocks: + TYPE -> STORED or TABLE or LEN or CHECK + STORED -> COPY -> TYPE + TABLE -> LENLENS -> CODELENS -> LEN + Read deflate codes: + LEN -> LENEXT or LIT or TYPE + LENEXT -> DIST -> DISTEXT -> MATCH -> LEN + LIT -> LEN + Process trailer: + CHECK -> LENGTH -> DONE + */ + +/* state maintained between inflate() calls. Approximately 7K bytes. */ +struct inflate_state { + inflate_mode mode; /* current inflate mode */ + int last; /* true if processing last block */ + int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ + int havedict; /* true if dictionary provided */ + int flags; /* gzip header method and flags (0 if zlib) */ + unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ + unsigned long check; /* protected copy of check value */ + unsigned long total; /* protected copy of output count */ + gz_headerp head; /* where to save gzip header information */ + /* sliding window */ + unsigned wbits; /* log base 2 of requested window size */ + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned write; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + /* bit accumulator */ + unsigned long hold; /* input bit accumulator */ + unsigned bits; /* number of bits in "in" */ + /* for string and stored block copying */ + unsigned length; /* literal or length of data to copy */ + unsigned offset; /* distance back to copy string from */ + /* for table and code decoding */ + unsigned extra; /* extra bits needed */ + /* fixed and dynamic code tables */ + code const FAR *lencode; /* starting table for length/literal codes */ + code const FAR *distcode; /* starting table for distance codes */ + unsigned lenbits; /* index bits for lencode */ + unsigned distbits; /* index bits for distcode */ + /* dynamic table building */ + unsigned ncode; /* number of code length code lengths */ + unsigned nlen; /* number of length code lengths */ + unsigned ndist; /* number of distance code lengths */ + unsigned have; /* number of code lengths in lens[] */ + code FAR *next; /* next available space in codes[] */ + unsigned short lens[320]; /* temporary storage for code lengths */ + unsigned short work[288]; /* work area for code table building */ + code codes[ENOUGH]; /* space for code tables */ +}; diff --git a/common/dist/zlib/inftrees.c b/common/dist/zlib/inftrees.c new file mode 100644 index 000000000..c20487be3 --- /dev/null +++ b/common/dist/zlib/inftrees.c @@ -0,0 +1,331 @@ +/* $NetBSD: inftrees.c,v 1.2 2006/01/16 03:23:10 christos Exp $ */ + +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" + +#define MAXBITS 15 + +const char inflate_copyright[] = + " inflate 1.2.3 Copyright 1995-2005 Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* + Build a set of tables to decode the provided canonical Huffman code. + The code lengths are lens[0..codes-1]. The result starts at *table, + whose indices are 0..2^bits-1. work is a writable array of at least + lens shorts, which is used as a work area. type is the type of code + to be generated, CODES, LENS, or DISTS. On return, zero is success, + -1 is an invalid code, and +1 means that ENOUGH isn't enough. table + on return points to the next available entry's address. bits is the + requested root table index bits, and on return it is the actual root + table index bits. It will differ if the request is greater than the + longest code or if it is less than the shortest code. + */ +int inflate_table(type, lens, codes, table, bits, work) +codetype type; +unsigned short FAR *lens; +unsigned codes; +code FAR * FAR *table; +unsigned FAR *bits; +unsigned short FAR *work; +{ + unsigned len; /* a code's length in bits */ + unsigned sym; /* index of code symbols */ + unsigned mmin, mmax; /* minimum and maximum code lengths */ + unsigned root; /* number of index bits for root table */ + unsigned curr; /* number of index bits for current table */ + unsigned drop; /* code bits to drop for sub-table */ + int left; /* number of prefix codes available */ + unsigned used; /* code entries in table used */ + unsigned huff; /* Huffman code */ + unsigned incr; /* for incrementing code, index */ + unsigned fill; /* index for replicating entries */ + unsigned low; /* low bits for current root entry */ + unsigned mask; /* mask for low root bits */ + code this; /* table entry for duplication */ + code FAR *next; /* next available space in table */ + const unsigned short FAR *base; /* base value table to use */ + const unsigned short FAR *extra; /* extra bits table to use */ + int end; /* use base and extra for symbol > end */ + unsigned short count[MAXBITS+1]; /* number of codes of each length */ + unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ + static const unsigned short lbase[31] = { /* Length codes 257..285 base */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + static const unsigned short lext[31] = { /* Length codes 257..285 extra */ + 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, + 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196}; + static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577, 0, 0}; + static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ + 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, + 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, + 28, 28, 29, 29, 64, 64}; + + /* + Process a set of code lengths to create a canonical Huffman code. The + code lengths are lens[0..codes-1]. Each length corresponds to the + symbols 0..codes-1. The Huffman code is generated by first sorting the + symbols by length from short to long, and retaining the symbol order + for codes with equal lengths. Then the code starts with all zero bits + for the first code of the shortest length, and the codes are integer + increments for the same length, and zeros are appended as the length + increases. For the deflate format, these bits are stored backwards + from their more natural integer increment ordering, and so when the + decoding tables are built in the large loop below, the integer codes + are incremented backwards. + + This routine assumes, but does not check, that all of the entries in + lens[] are in the range 0..MAXBITS. The caller must assure this. + 1..MAXBITS is interpreted as that code length. zero means that that + symbol does not occur in this code. + + The codes are sorted by computing a count of codes for each length, + creating from that a table of starting indices for each length in the + sorted table, and then entering the symbols in order in the sorted + table. The sorted table is work[], with that space being provided by + the caller. + + The length counts are used for other purposes as well, i.e. finding + the minimum and maximum length codes, determining if there are any + codes at all, checking for a valid set of lengths, and looking ahead + at length counts to determine sub-table sizes when building the + decoding tables. + */ + + /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ + for (len = 0; len <= MAXBITS; len++) + count[len] = 0; + for (sym = 0; sym < codes; sym++) + count[lens[sym]]++; + + /* bound code lengths, force root to be within code lengths */ + root = *bits; + for (mmax = MAXBITS; mmax >= 1; mmax--) + if (count[mmax] != 0) break; + if (root > mmax) root = mmax; + if (mmax == 0) { /* no symbols to code at all */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)1; + this.val = (unsigned short)0; + *(*table)++ = this; /* make a table to force an error */ + *(*table)++ = this; + *bits = 1; + return 0; /* no symbols, but wait for decoding to report error */ + } + for (mmin = 1; mmin <= MAXBITS; mmin++) + if (count[mmin] != 0) break; + if (root < mmin) root = mmin; + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; + left -= count[len]; + if (left < 0) return -1; /* over-subscribed */ + } + if (left > 0 && (type == CODES || mmax != 1)) + return -1; /* incomplete set */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + count[len]; + + /* sort symbols by length, by symbol order within each length */ + for (sym = 0; sym < codes; sym++) + if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; + + /* + Create and fill in decoding tables. In this loop, the table being + filled is at next and has curr index bits. The code being used is huff + with length len. That code is converted to an index by dropping drop + bits off of the bottom. For codes where len is less than drop + curr, + those top drop + curr - len bits are incremented through all values to + fill the table with replicated entries. + + root is the number of index bits for the root table. When len exceeds + root, sub-tables are created pointed to by the root entry with an index + of the low root bits of huff. This is saved in low to check for when a + new sub-table should be started. drop is zero when the root table is + being filled, and drop is root when sub-tables are being filled. + + When a new sub-table is needed, it is necessary to look ahead in the + code lengths to determine what size sub-table is needed. The length + counts are used for this, and so count[] is decremented as codes are + entered in the tables. + + used keeps track of how many table entries have been allocated from the + provided *table space. It is checked when a LENS table is being made + against the space in *table, ENOUGH, minus the maximum space needed by + the worst case distance code, MAXD. This should never happen, but the + sufficiency of ENOUGH has not been proven exhaustively, hence the check. + This assumes that when type == LENS, bits == 9. + + sym increments through all symbols, and the loop terminates when + all codes of length mmax, i.e. all codes, have been processed. This + routine permits incomplete codes, so another loop after this one fills + in the rest of the decoding tables with invalid code markers. + */ + + /* set up for code type */ + switch (type) { + case CODES: + base = extra = work; /* dummy value--not used */ + end = 19; + break; + case LENS: + base = lbase; + base -= 257; + extra = lext; + extra -= 257; + end = 256; + break; + default: /* DISTS */ + base = dbase; + extra = dext; + end = -1; + } + + /* initialize state for loop */ + huff = 0; /* starting code */ + sym = 0; /* starting code symbol */ + len = mmin; /* starting code length */ + next = *table; /* current table to fill in */ + curr = root; /* current table index bits */ + drop = 0; /* current bits to drop from code for index */ + low = (unsigned)(-1); /* trigger new sub-table when len > root */ + used = 1U << root; /* use root table entries */ + mask = used - 1; /* mask for comparing low */ + + /* check available table space */ + if (type == LENS && used >= ENOUGH - MAXD) + return 1; + + /* process all codes and make table entries */ + for (;;) { + /* create table entry */ + this.bits = (unsigned char)(len - drop); + if ((int)(work[sym]) < end) { + this.op = (unsigned char)0; + this.val = work[sym]; + } + else if ((int)(work[sym]) > end) { + this.op = (unsigned char)(extra[work[sym]]); + this.val = base[work[sym]]; + } + else { + this.op = (unsigned char)(32 + 64); /* end of block */ + this.val = 0; + } + + /* replicate for those indices with low len bits equal to huff */ + incr = 1U << (len - drop); + fill = 1U << curr; + mmin = fill; /* save offset to next table */ + do { + fill -= incr; + next[(huff >> drop) + fill] = this; + } while (fill != 0); + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + + /* go to next symbol, update count, len */ + sym++; + if (--(count[len]) == 0) { + if (len == mmax) break; + len = lens[work[sym]]; + } + + /* create new sub-table if needed */ + if (len > root && (huff & mask) != low) { + /* if first time, transition to sub-tables */ + if (drop == 0) + drop = root; + + /* increment past last table */ + next += mmin; /* here mmin is 1 << curr */ + + /* determine length of next table */ + curr = len - drop; + left = (int)(1 << curr); + while (curr + drop < mmax) { + left -= count[curr + drop]; + if (left <= 0) break; + curr++; + left <<= 1; + } + + /* check for enough space */ + used += 1U << curr; + if (type == LENS && used >= ENOUGH - MAXD) + return 1; + + /* point entry in root table to sub-table */ + low = huff & mask; + (*table)[low].op = (unsigned char)curr; + (*table)[low].bits = (unsigned char)root; + (*table)[low].val = (unsigned short)(next - *table); + } + } + + /* + Fill in rest of table for incomplete codes. This loop is similar to the + loop above in incrementing huff for table indices. It is assumed that + len is equal to curr + drop, so there is no loop needed to increment + through high index bits. When the current sub-table is filled, the loop + drops back to the root table to fill in any remaining entries there. + */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)(len - drop); + this.val = (unsigned short)0; + while (huff != 0) { + /* when done with sub-table, drop back to root table */ + if (drop != 0 && (huff & mask) != low) { + drop = 0; + len = root; + next = *table; + this.bits = (unsigned char)len; + } + + /* put invalid code marker in table */ + next[huff >> drop] = this; + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + } + + /* set return parameters */ + *table += used; + *bits = root; + return 0; +} diff --git a/common/dist/zlib/inftrees.h b/common/dist/zlib/inftrees.h new file mode 100644 index 000000000..7200a0e56 --- /dev/null +++ b/common/dist/zlib/inftrees.h @@ -0,0 +1,57 @@ +/* $NetBSD: inftrees.h,v 1.1.1.1 2006/01/14 20:10:31 christos Exp $ */ + +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Structure for decoding tables. Each entry provides either the + information needed to do the operation requested by the code that + indexed that table entry, or it provides a pointer to another + table that indexes more bits of the code. op indicates whether + the entry is a pointer to another table, a literal, a length or + distance, an end-of-block, or an invalid code. For a table + pointer, the low four bits of op is the number of index bits of + that table. For a length or distance, the low four bits of op + is the number of extra bits to get after the code. bits is + the number of bits in this code or part of the code to drop off + of the bit buffer. val is the actual byte to output in the case + of a literal, the base length or distance, or the offset from + the current table to the next table. Each entry is four bytes. */ +typedef struct { + unsigned char op; /* operation, extra bits, table bits */ + unsigned char bits; /* bits in this part of the code */ + unsigned short val; /* offset in table or code value */ +} code; + +/* op values as set by inflate_table(): + 00000000 - literal + 0000tttt - table link, tttt != 0 is the number of table index bits + 0001eeee - length or distance, eeee is the number of extra bits + 01100000 - end of block + 01000000 - invalid code + */ + +/* Maximum size of dynamic tree. The maximum found in a long but non- + exhaustive search was 1444 code structures (852 for length/literals + and 592 for distances, the latter actually the result of an + exhaustive search). The true maximum is not known, but the value + below is more than safe. */ +#define ENOUGH 2048 +#define MAXD 592 + +/* Type of code to build for inftable() */ +typedef enum { + CODES, + LENS, + DISTS +} codetype; + +extern int inflate_table OF((codetype type, unsigned short FAR *lens, + unsigned codes, code FAR * FAR *table, + unsigned FAR *bits, unsigned short FAR *work)); diff --git a/common/dist/zlib/make_vms.com b/common/dist/zlib/make_vms.com new file mode 100644 index 000000000..c2a1fb54b --- /dev/null +++ b/common/dist/zlib/make_vms.com @@ -0,0 +1,461 @@ +$! make libz under VMS written by +$! Martin P.J. Zinser +$! +$! +$ on error then goto err_exit +$! +$! +$! Just some general constants... +$! +$ true = 1 +$ false = 0 +$ tmpnam = "temp_" + f$getjpi("","pid") +$ SAY = "WRITE SYS$OUTPUT" +$! +$! Setup variables holding "config" information +$! +$ Make = "" +$ name = "Zlib" +$ version = "?.?.?" +$ v_string = "ZLIB_VERSION" +$ v_file = "zlib.h" +$ ccopt = "" +$ lopts = "" +$ linkonly = false +$ optfile = name + ".opt" +$ its_decc = false +$ its_vaxc = false +$ its_gnuc = false +$ axp = f$getsyi("HW_MODEL").ge.1024 +$ s_case = false +$! Check for MMK/MMS +$! +$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS" +$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK" +$! +$! +$ gosub find_version +$! +$ gosub check_opts +$! +$! Look for the compiler used +$! +$ gosub check_compiler +$ if its_decc +$ then +$ ccopt = "/prefix=all" + ccopt +$ if f$trnlnm("SYS") .eqs. "" +$ then +$ if axp +$ then +$ define sys sys$library: +$ else +$ ccopt = "/decc" + ccopt +$ define sys decc$library_include: +$ endif +$ endif +$ endif +$ if its_vaxc .or. its_gnuc +$ then +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ endif +$! +$! Build the thing plain or with mms +$! +$ write sys$output "Compiling Zlib sources ..." +$ if make.eqs."" +$ then +$ dele example.obj;*,minigzip.obj;* +$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" - + adler32.c zlib.h zconf.h +$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" - + compress.c zlib.h zconf.h +$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" - + crc32.c zlib.h zconf.h +$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" - + deflate.c deflate.h zutil.h zlib.h zconf.h +$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" - + gzio.c zutil.h zlib.h zconf.h +$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" - + infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h +$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" - + inffast.c zutil.h zlib.h zconf.h inffast.h +$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" - + inflate.c zutil.h zlib.h zconf.h infblock.h +$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" - + inftrees.c zutil.h zlib.h zconf.h inftrees.h +$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" - + trees.c deflate.h zutil.h zlib.h zconf.h +$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" - + uncompr.c zlib.h zconf.h +$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" - + zutil.c zutil.h zlib.h zconf.h +$ write sys$output "Building Zlib ..." +$ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ +$ write sys$output "Building example..." +$ CALL MAKE example.OBJ "CC ''CCOPT' example" - + example.c zlib.h zconf.h +$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb +$ if f$search("x11vms:xvmsutils.olb") .nes. "" +$ then +$ write sys$output "Building minigzip..." +$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" - + minigzip.c zlib.h zconf.h +$ call make minigzip.exe - + "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" - + minigzip.obj libz.olb +$ endif +$ else +$ gosub crea_mms +$ SAY "Make ''name' ''version' with ''Make' " +$ 'make' +$ endif +$! +$! Alpha gets a shareable image +$! +$ If axp +$ Then +$ gosub crea_olist +$ write sys$output "Creating libzshr.exe" +$ call anal_obj_axp modules.opt _link.opt +$ if s_case +$ then +$ open/append optf modules.opt +$ write optf "case_sensitive=YES" +$ close optf +$ endif +$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,_link.opt/opt +$ endif +$ write sys$output "Zlib build completed" +$ exit +$CC_ERR: +$ write sys$output "C compiler required to build ''name'" +$ goto err_exit +$ERR_EXIT: +$ set message/facil/ident/sever/text +$ write sys$output "Exiting..." +$ exit 2 +$! +$! +$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES +$ V = 'F$Verify(0) +$! P1 = What we are trying to make +$! P2 = Command to make it +$! P3 - P8 What it depends on +$ +$ If F$Search(P1) .Eqs. "" Then Goto Makeit +$ Time = F$CvTime(F$File(P1,"RDT")) +$arg=3 +$Loop: +$ Argument = P'arg +$ If Argument .Eqs. "" Then Goto Exit +$ El=0 +$Loop2: +$ File = F$Element(El," ",Argument) +$ If File .Eqs. " " Then Goto Endl +$ AFile = "" +$Loop3: +$ OFile = AFile +$ AFile = F$Search(File) +$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl +$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit +$ Goto Loop3 +$NextEL: +$ El = El + 1 +$ Goto Loop2 +$EndL: +$ arg=arg+1 +$ If arg .Le. 8 Then Goto Loop +$ Goto Exit +$ +$Makeit: +$ VV=F$VERIFY(0) +$ write sys$output P2 +$ 'P2 +$ VV='F$Verify(VV) +$Exit: +$ If V Then Set Verify +$ENDSUBROUTINE +$!------------------------------------------------------------------------------ +$! +$! Check command line options and set symbols accordingly +$! +$ CHECK_OPTS: +$ i = 1 +$ OPT_LOOP: +$ if i .lt. 9 +$ then +$ cparm = f$edit(p'i',"upcase") +$ if cparm .eqs. "DEBUG" +$ then +$ ccopt = ccopt + "/noopt/deb" +$ lopts = lopts + "/deb" +$ endif +$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ ccopt = ccopt + f$extract(start,len,cparm) +$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) - + then s_case = true +$ endif +$ if cparm .eqs. "LINK" then linkonly = true +$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ lopts = lopts + f$extract(start,len,cparm) +$ endif +$ if f$locate("CC=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ cc_com = f$extract(start,len,cparm) + if (cc_com .nes. "DECC") .and. - + (cc_com .nes. "VAXC") .and. - + (cc_com .nes. "GNUC") +$ then +$ write sys$output "Unsupported compiler choice ''cc_com' ignored" +$ write sys$output "Use DECC, VAXC, or GNUC instead" +$ else +$ if cc_com .eqs. "DECC" then its_decc = true +$ if cc_com .eqs. "VAXC" then its_vaxc = true +$ if cc_com .eqs. "GNUC" then its_gnuc = true +$ endif +$ endif +$ if f$locate("MAKE=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ mmks = f$extract(start,len,cparm) +$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS") +$ then +$ make = mmks +$ else +$ write sys$output "Unsupported make choice ''mmks' ignored" +$ write sys$output "Use MMK or MMS instead" +$ endif +$ endif +$ i = i + 1 +$ goto opt_loop +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Look for the compiler used +$! +$CHECK_COMPILER: +$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc)) +$ then +$ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "") +$ its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "") +$ its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "") +$ endif +$! +$! Exit if no compiler available +$! +$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc)) +$ then goto CC_ERR +$ else +$ if its_decc then write sys$output "CC compiler check ... Compaq C" +$ if its_vaxc then write sys$output "CC compiler check ... VAX C" +$ if its_gnuc then write sys$output "CC compiler check ... GNU C" +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! If MMS/MMK are available dump out the descrip.mms if required +$! +$CREA_MMS: +$ write sys$output "Creating descrip.mms..." +$ create descrip.mms +$ open/append out descrip.mms +$ copy sys$input: out +$ deck +# descrip.mms: MMS description file for building zlib on VMS +# written by Martin P.J. Zinser +# + +OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj, infback.obj\ + deflate.obj, trees.obj, zutil.obj, inflate.obj, \ + inftrees.obj, inffast.obj + +$ eod +$ write out "CFLAGS=", ccopt +$ write out "LOPTS=", lopts +$ copy sys$input: out +$ deck + +all : example.exe minigzip.exe libz.olb + @ write sys$output " Example applications available" + +libz.olb : libz.olb($(OBJS)) + @ write sys$output " libz available" + +example.exe : example.obj libz.olb + link $(LOPTS) example,libz.olb/lib + +minigzip.exe : minigzip.obj libz.olb + link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib + +clean : + delete *.obj;*,libz.olb;*,*.opt;*,*.exe;* + + +# Other dependencies. +adler32.obj : adler32.c zutil.h zlib.h zconf.h +compress.obj : compress.c zlib.h zconf.h +crc32.obj : crc32.c zutil.h zlib.h zconf.h +deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h +example.obj : example.c zlib.h zconf.h +gzio.obj : gzio.c zutil.h zlib.h zconf.h +inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h +inflate.obj : inflate.c zutil.h zlib.h zconf.h +inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h +minigzip.obj : minigzip.c zlib.h zconf.h +trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h +uncompr.obj : uncompr.c zlib.h zconf.h +zutil.obj : zutil.c zutil.h zlib.h zconf.h +infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h +$ eod +$ close out +$ return +$!------------------------------------------------------------------------------ +$! +$! Read list of core library sources from makefile.in and create options +$! needed to build shareable image +$! +$CREA_OLIST: +$ open/read min makefile.in +$ open/write mod modules.opt +$ src_check = "OBJS =" +$MRLOOP: +$ read/end=mrdone min rec +$ if (f$extract(0,6,rec) .nes. src_check) then goto mrloop +$ rec = rec - src_check +$ gosub extra_filnam +$ if (f$element(1,"\",rec) .eqs. "\") then goto mrdone +$MRSLOOP: +$ read/end=mrdone min rec +$ gosub extra_filnam +$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop +$MRDONE: +$ close min +$ close mod +$ return +$!------------------------------------------------------------------------------ +$! +$! Take record extracted in crea_olist and split it into single filenames +$! +$EXTRA_FILNAM: +$ myrec = f$edit(rec - "\", "trim,compress") +$ i = 0 +$FELOOP: +$ srcfil = f$element(i," ", myrec) +$ if (srcfil .nes. " ") +$ then +$ write mod f$parse(srcfil,,,"NAME"), ".obj" +$ i = i + 1 +$ goto feloop +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Find current Zlib version number +$! +$FIND_VERSION: +$ open/read h_in 'v_file' +$hloop: +$ read/end=hdone h_in rec +$ rec = f$edit(rec,"TRIM") +$ if (f$extract(0,1,rec) .nes. "#") then goto hloop +$ rec = f$edit(rec - "#", "TRIM") +$ if f$element(0," ",rec) .nes. "define" then goto hloop +$ if f$element(1," ",rec) .eqs. v_string +$ then +$ version = 'f$element(2," ",rec)' +$ goto hdone +$ endif +$ goto hloop +$hdone: +$ close h_in +$ return +$!------------------------------------------------------------------------------ +$! +$! Analyze Object files for OpenVMS AXP to extract Procedure and Data +$! information to build a symbol vector for a shareable image +$! All the "brains" of this logic was suggested by Hartmut Becker +$! (Hartmut.Becker@compaq.com). All the bugs were introduced by me +$! (zinser@decus.de), so if you do have problem reports please do not +$! bother Hartmut/HP, but get in touch with me +$! +$ ANAL_OBJ_AXP: Subroutine +$ V = 'F$Verify(0) +$ SAY := "WRITE_ SYS$OUTPUT" +$ +$ IF F$SEARCH("''P1'") .EQS. "" +$ THEN +$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available" +$ goto exit_aa +$ ENDIF +$ IF "''P2'" .EQS. "" +$ THEN +$ SAY "ANAL_OBJ_AXP: Error, no output file provided" +$ goto exit_aa +$ ENDIF +$ +$ open/read in 'p1 +$ create a.tmp +$ open/append atmp a.tmp +$ loop: +$ read/end=end_loop in line +$ f= f$search(line) +$ if f .eqs. "" +$ then +$ write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'" +$ goto loop +$ endif +$ define/user sys$output nl: +$ define/user sys$error nl: +$ anal/obj/gsd 'f /out=x.tmp +$ open/read xtmp x.tmp +$ XLOOP: +$ read/end=end_xloop xtmp xline +$ xline = f$edit(xline,"compress") +$ write atmp xline +$ goto xloop +$ END_XLOOP: +$ close xtmp +$ goto loop +$ end_loop: +$ close in +$ close atmp +$ if f$search("a.tmp") .eqs. "" - + then $ exit +$ ! all global definitions +$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp +$ ! all procedures +$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp +$ search c.tmp "symbol:"/out=d.tmp +$ define/user sys$output nl: +$ edito/edt/command=sys$input d.tmp +sub/symbol: "/symbol_vector=(/whole +sub/"/=PROCEDURE)/whole +exit +$ ! all data +$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp +$ search e.tmp "symbol:"/out=f.tmp +$ define/user sys$output nl: +$ edito/edt/command=sys$input f.tmp +sub/symbol: "/symbol_vector=(/whole +sub/"/=DATA)/whole +exit +$ sort/nodupl d.tmp,f.tmp 'p2' +$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;* +$ if f$search("x.tmp") .nes. "" - + then $ delete x.tmp;* +$! +$ EXIT_AA: +$ if V then set verify +$ endsubroutine +$!------------------------------------------------------------------------------ diff --git a/common/dist/zlib/minigzip.c b/common/dist/zlib/minigzip.c new file mode 100644 index 000000000..ead70e580 --- /dev/null +++ b/common/dist/zlib/minigzip.c @@ -0,0 +1,324 @@ +/* $NetBSD: minigzip.c,v 1.1.1.1 2006/01/14 20:10:31 christos Exp $ */ + +/* minigzip.c -- simulate gzip using the zlib compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * minigzip is a minimal implementation of the gzip utility. This is + * only an example of using zlib and isn't meant to replace the + * full-featured gzip. No attempt is made to deal with file systems + * limiting names to 14 or 8+3 characters, etc... Error checking is + * very limited. So use minigzip only for testing; use gzip for the + * real thing. On MSDOS, use only on file names without extension + * or in pipe mode. + */ + +/* @(#) Id */ + +#include +#include "zlib.h" + +#ifdef STDC +# include +# include +#endif + +#ifdef USE_MMAP +# include +# include +# include +#endif + +#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) +# include +# include +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +#ifdef VMS +# define unlink delete +# define GZ_SUFFIX "-gz" +#endif +#ifdef RISCOS +# define unlink remove +# define GZ_SUFFIX "-gz" +# define fileno(file) file->__file +#endif +#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include /* for fileno */ +#endif + +#ifndef WIN32 /* unlink already in stdio.h for WIN32 */ + extern int unlink OF((const char *)); +#endif + +#ifndef GZ_SUFFIX +# define GZ_SUFFIX ".gz" +#endif +#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1) + +#define BUFLEN 16384 +#define MAX_NAME_LEN 1024 + +#ifdef MAXSEG_64K +# define local static + /* Needed for systems with limitation on stack size. */ +#else +# define local +#endif + +char *prog; + +void error OF((const char *msg)); +void gz_compress OF((FILE *in, gzFile out)); +#ifdef USE_MMAP +int gz_compress_mmap OF((FILE *in, gzFile out)); +#endif +void gz_uncompress OF((gzFile in, FILE *out)); +void file_compress OF((char *file, char *mode)); +void file_uncompress OF((char *file)); +int main OF((int argc, char *argv[])); + +/* =========================================================================== + * Display error message and exit + */ +void error(msg) + const char *msg; +{ + fprintf(stderr, "%s: %s\n", prog, msg); + exit(1); +} + +/* =========================================================================== + * Compress input to output then close both files. + */ + +void gz_compress(in, out) + FILE *in; + gzFile out; +{ + local char buf[BUFLEN]; + int len; + int err; + +#ifdef USE_MMAP + /* Try first compressing with mmap. If mmap fails (minigzip used in a + * pipe), use the normal fread loop. + */ + if (gz_compress_mmap(in, out) == Z_OK) return; +#endif + for (;;) { + len = (int)fread(buf, 1, sizeof(buf), in); + if (ferror(in)) { + perror("fread"); + exit(1); + } + if (len == 0) break; + + if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err)); + } + fclose(in); + if (gzclose(out) != Z_OK) error("failed gzclose"); +} + +#ifdef USE_MMAP /* MMAP version, Miguel Albrecht */ + +/* Try compressing the input file at once using mmap. Return Z_OK if + * if success, Z_ERRNO otherwise. + */ +int gz_compress_mmap(in, out) + FILE *in; + gzFile out; +{ + int len; + int err; + int ifd = fileno(in); + caddr_t buf; /* mmap'ed buffer for the entire input file */ + off_t buf_len; /* length of the input file */ + struct stat sb; + + /* Determine the size of the file, needed for mmap: */ + if (fstat(ifd, &sb) < 0) return Z_ERRNO; + buf_len = sb.st_size; + if (buf_len <= 0) return Z_ERRNO; + + /* Now do the actual mmap: */ + buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); + if (buf == (caddr_t)(-1)) return Z_ERRNO; + + /* Compress the whole file at once: */ + len = gzwrite(out, (char *)buf, (unsigned)buf_len); + + if (len != (int)buf_len) error(gzerror(out, &err)); + + munmap(buf, buf_len); + fclose(in); + if (gzclose(out) != Z_OK) error("failed gzclose"); + return Z_OK; +} +#endif /* USE_MMAP */ + +/* =========================================================================== + * Uncompress input to output then close both files. + */ +void gz_uncompress(in, out) + gzFile in; + FILE *out; +{ + local char buf[BUFLEN]; + int len; + int err; + + for (;;) { + len = gzread(in, buf, sizeof(buf)); + if (len < 0) error (gzerror(in, &err)); + if (len == 0) break; + + if ((int)fwrite(buf, 1, (unsigned)len, out) != len) { + error("failed fwrite"); + } + } + if (fclose(out)) error("failed fclose"); + + if (gzclose(in) != Z_OK) error("failed gzclose"); +} + + +/* =========================================================================== + * Compress the given file: create a corresponding .gz file and remove the + * original. + */ +void file_compress(file, mode) + char *file; + char *mode; +{ + local char outfile[MAX_NAME_LEN]; + FILE *in; + gzFile out; + + strcpy(outfile, file); + strcat(outfile, GZ_SUFFIX); + + in = fopen(file, "rb"); + if (in == NULL) { + perror(file); + exit(1); + } + out = gzopen(outfile, mode); + if (out == NULL) { + fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile); + exit(1); + } + gz_compress(in, out); + + unlink(file); +} + + +/* =========================================================================== + * Uncompress the given file and remove the original. + */ +void file_uncompress(file) + char *file; +{ + local char buf[MAX_NAME_LEN]; + char *infile, *outfile; + FILE *out; + gzFile in; + uInt len = (uInt)strlen(file); + + strcpy(buf, file); + + if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) { + infile = file; + outfile = buf; + outfile[len-3] = '\0'; + } else { + outfile = file; + infile = buf; + strcat(infile, GZ_SUFFIX); + } + in = gzopen(infile, "rb"); + if (in == NULL) { + fprintf(stderr, "%s: can't gzopen %s\n", prog, infile); + exit(1); + } + out = fopen(outfile, "wb"); + if (out == NULL) { + perror(file); + exit(1); + } + + gz_uncompress(in, out); + + unlink(infile); +} + + +/* =========================================================================== + * Usage: minigzip [-d] [-f] [-h] [-r] [-1 to -9] [files...] + * -d : decompress + * -f : compress with Z_FILTERED + * -h : compress with Z_HUFFMAN_ONLY + * -r : compress with Z_RLE + * -1 to -9 : compression level + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + int uncompr = 0; + gzFile file; + char outmode[20]; + + strcpy(outmode, "wb6 "); + + prog = argv[0]; + argc--, argv++; + + while (argc > 0) { + if (strcmp(*argv, "-d") == 0) + uncompr = 1; + else if (strcmp(*argv, "-f") == 0) + outmode[3] = 'f'; + else if (strcmp(*argv, "-h") == 0) + outmode[3] = 'h'; + else if (strcmp(*argv, "-r") == 0) + outmode[3] = 'R'; + else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' && + (*argv)[2] == 0) + outmode[2] = (*argv)[1]; + else + break; + argc--, argv++; + } + if (outmode[3] == ' ') + outmode[3] = 0; + if (argc == 0) { + SET_BINARY_MODE(stdin); + SET_BINARY_MODE(stdout); + if (uncompr) { + file = gzdopen(fileno(stdin), "rb"); + if (file == NULL) error("can't gzdopen stdin"); + gz_uncompress(file, stdout); + } else { + file = gzdopen(fileno(stdout), outmode); + if (file == NULL) error("can't gzdopen stdout"); + gz_compress(stdin, file); + } + } else { + do { + if (uncompr) { + file_uncompress(*argv); + } else { + file_compress(*argv, outmode); + } + } while (argv++, --argc); + } + return 0; +} diff --git a/common/dist/zlib/msdos/Makefile.bor b/common/dist/zlib/msdos/Makefile.bor new file mode 100644 index 000000000..8f8132d12 --- /dev/null +++ b/common/dist/zlib/msdos/Makefile.bor @@ -0,0 +1,109 @@ +# Makefile for zlib +# Borland C++ +# Last updated: 15-Mar-2003 + +# To use, do "make -fmakefile.bor" +# To compile in small model, set below: MODEL=s + +# WARNING: the small model is supported but only for small values of +# MAX_WBITS and MAX_MEM_LEVEL. For example: +# -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3 +# If you wish to reduce the memory requirements (default 256K for big +# objects plus a few K), you can add to the LOC macro below: +# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14 +# See zconf.h for details about the memory requirements. + +# ------------ Turbo C++, Borland C++ ------------ + +# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7) +# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added +# to the declaration of LOC here: +LOC = $(LOCAL_ZLIB) + +# type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc. +CPU_TYP = 0 + +# memory model: one of s, m, c, l (small, medium, compact, large) +MODEL=l + +# replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version +CC=bcc +LD=bcc +AR=tlib + +# compiler flags +# replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0 +CFLAGS=-O2 -Z -m$(MODEL) $(LOC) + +LDFLAGS=-m$(MODEL) -f- + + +# variables +ZLIB_LIB = zlib_$(MODEL).lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj +OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj +OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzio.obj: gzio.c zutil.h zlib.h zconf.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: example.c zlib.h zconf.h + +minigzip.obj: minigzip.c zlib.h zconf.h + + +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +clean: + -del *.obj + -del *.lib + -del *.exe + -del zlib_*.bak + -del foo.gz diff --git a/common/dist/zlib/msdos/Makefile.dj2 b/common/dist/zlib/msdos/Makefile.dj2 new file mode 100644 index 000000000..283d1d961 --- /dev/null +++ b/common/dist/zlib/msdos/Makefile.dj2 @@ -0,0 +1,104 @@ +# Makefile for zlib. Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96. +# Copyright (C) 1995-1998 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type: +# +# make -fmakefile.dj2; make test -fmakefile.dj2 +# +# To install libz.a, zconf.h and zlib.h in the djgpp directories, type: +# +# make install -fmakefile.dj2 +# +# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as +# in the sample below if the pattern of the DJGPP distribution is to +# be followed. Remember that, while 'es around <=> are ignored in +# makefiles, they are *not* in batch files or in djgpp.env. +# - - - - - +# [make] +# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include +# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib +# BUTT=-m486 +# - - - - - +# Alternately, these variables may be defined below, overriding the values +# in djgpp.env, as +# INCLUDE_PATH=c:\usr\include +# LIBRARY_PATH=c:\usr\lib + +CC=gcc + +#CFLAGS=-MMD -O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-MMD -g -DDEBUG +CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ + -Wstrict-prototypes -Wmissing-prototypes + +# If cp.exe is available, replace "copy /Y" with "cp -fp" . +CP=copy /Y +# If gnu install.exe is available, replace $(CP) with ginstall. +INSTALL=$(CP) +# The default value of RM is "rm -f." If "rm.exe" is found, comment out: +RM=del +LDLIBS=-L. -lz +LD=$(CC) -s -o +LDSHARED=$(CC) + +INCL=zlib.h zconf.h +LIBS=libz.a + +AR=ar rcs + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \ + zutil.o inflate.o infback.o inftrees.o inffast.o + +OBJA = +# to use the asm code: make OBJA=match.o + +TEST_OBJS = example.o minigzip.o + +all: example.exe minigzip.exe + +check: test +test: all + ./example + echo hello world | .\minigzip | .\minigzip -d + +%.o : %.c + $(CC) $(CFLAGS) -c $< -o $@ + +libz.a: $(OBJS) $(OBJA) + $(AR) $@ $(OBJS) $(OBJA) + +%.exe : %.o $(LIBS) + $(LD) $@ $< $(LDLIBS) + +# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env . + +.PHONY : uninstall clean + +install: $(INCL) $(LIBS) + -@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH) + -@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH) + $(INSTALL) zlib.h $(INCLUDE_PATH) + $(INSTALL) zconf.h $(INCLUDE_PATH) + $(INSTALL) libz.a $(LIBRARY_PATH) + +uninstall: + $(RM) $(INCLUDE_PATH)\zlib.h + $(RM) $(INCLUDE_PATH)\zconf.h + $(RM) $(LIBRARY_PATH)\libz.a + +clean: + $(RM) *.d + $(RM) *.o + $(RM) *.exe + $(RM) libz.a + $(RM) foo.gz + +DEPS := $(wildcard *.d) +ifneq ($(DEPS),) +include $(DEPS) +endif diff --git a/common/dist/zlib/msdos/Makefile.emx b/common/dist/zlib/msdos/Makefile.emx new file mode 100644 index 000000000..ed4c31fbb --- /dev/null +++ b/common/dist/zlib/msdos/Makefile.emx @@ -0,0 +1,69 @@ +# Makefile for zlib. Modified for emx 0.9c by Chr. Spieler, 6/17/98. +# Copyright (C) 1995-1998 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type: +# +# make -fmakefile.emx; make test -fmakefile.emx +# + +CC=gcc + +#CFLAGS=-MMD -O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-MMD -g -DDEBUG +CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ + -Wstrict-prototypes -Wmissing-prototypes + +# If cp.exe is available, replace "copy /Y" with "cp -fp" . +CP=copy /Y +# If gnu install.exe is available, replace $(CP) with ginstall. +INSTALL=$(CP) +# The default value of RM is "rm -f." If "rm.exe" is found, comment out: +RM=del +LDLIBS=-L. -lzlib +LD=$(CC) -s -o +LDSHARED=$(CC) + +INCL=zlib.h zconf.h +LIBS=zlib.a + +AR=ar rcs + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \ + zutil.o inflate.o infback.o inftrees.o inffast.o + +TEST_OBJS = example.o minigzip.o + +all: example.exe minigzip.exe + +test: all + ./example + echo hello world | .\minigzip | .\minigzip -d + +%.o : %.c + $(CC) $(CFLAGS) -c $< -o $@ + +zlib.a: $(OBJS) + $(AR) $@ $(OBJS) + +%.exe : %.o $(LIBS) + $(LD) $@ $< $(LDLIBS) + + +.PHONY : clean + +clean: + $(RM) *.d + $(RM) *.o + $(RM) *.exe + $(RM) zlib.a + $(RM) foo.gz + +DEPS := $(wildcard *.d) +ifneq ($(DEPS),) +include $(DEPS) +endif diff --git a/common/dist/zlib/msdos/Makefile.msc b/common/dist/zlib/msdos/Makefile.msc new file mode 100644 index 000000000..b8fc665ef --- /dev/null +++ b/common/dist/zlib/msdos/Makefile.msc @@ -0,0 +1,106 @@ +# Makefile for zlib +# Microsoft C 5.1 or later +# Last updated: 19-Mar-2003 + +# To use, do "make makefile.msc" +# To compile in small model, set below: MODEL=S + +# If you wish to reduce the memory requirements (default 256K for big +# objects plus a few K), you can add to the LOC macro below: +# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14 +# See zconf.h for details about the memory requirements. + +# ------------- Microsoft C 5.1 and later ------------- + +# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7) +# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added +# to the declaration of LOC here: +LOC = $(LOCAL_ZLIB) + +# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc. +CPU_TYP = 0 + +# Memory model: one of S, M, C, L (small, medium, compact, large) +MODEL=L + +CC=cl +CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC) +#-Ox generates bad code with MSC 5.1 +LIB_CFLAGS=-Zl $(CFLAGS) + +LD=link +LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode +# "/farcall/packcode" are only useful for `large code' memory models +# but should be a "no-op" for small code models. + + +# variables +ZLIB_LIB = zlib_$(MODEL).lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj +OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(LIB_CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzio.obj: gzio.c zutil.h zlib.h zconf.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: example.c zlib.h zconf.h + $(CC) -c $(CFLAGS) $*.c + +minigzip.obj: minigzip.c zlib.h zconf.h + $(CC) -c $(CFLAGS) $*.c + + +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + if exist $(ZLIB_LIB) del $(ZLIB_LIB) + lib $(ZLIB_LIB) $(OBJ1); + lib $(ZLIB_LIB) $(OBJ2); + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB); + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB); + +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +clean: + -del *.obj + -del *.lib + -del *.exe + -del *.map + -del zlib_*.bak + -del foo.gz diff --git a/common/dist/zlib/msdos/Makefile.tc b/common/dist/zlib/msdos/Makefile.tc new file mode 100644 index 000000000..480750ade --- /dev/null +++ b/common/dist/zlib/msdos/Makefile.tc @@ -0,0 +1,94 @@ +# Makefile for zlib +# Turbo C 2.01, Turbo C++ 1.01 +# Last updated: 15-Mar-2003 + +# To use, do "make -fmakefile.tc" +# To compile in small model, set below: MODEL=s + +# WARNING: the small model is supported but only for small values of +# MAX_WBITS and MAX_MEM_LEVEL. For example: +# -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3 +# If you wish to reduce the memory requirements (default 256K for big +# objects plus a few K), you can add to CFLAGS below: +# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14 +# See zconf.h for details about the memory requirements. + +# ------------ Turbo C 2.01, Turbo C++ 1.01 ------------ +MODEL=l +CC=tcc +LD=tcc +AR=tlib +# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3 +CFLAGS=-O2 -G -Z -m$(MODEL) +LDFLAGS=-m$(MODEL) -f- + + +# variables +ZLIB_LIB = zlib_$(MODEL).lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj +OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj +OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzio.obj: gzio.c zutil.h zlib.h zconf.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: example.c zlib.h zconf.h + +minigzip.obj: minigzip.c zlib.h zconf.h + + +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +clean: + -del *.obj + -del *.lib + -del *.exe + -del zlib_*.bak + -del foo.gz diff --git a/common/dist/zlib/old/Makefile.riscos b/common/dist/zlib/old/Makefile.riscos new file mode 100644 index 000000000..57e29d3fb --- /dev/null +++ b/common/dist/zlib/old/Makefile.riscos @@ -0,0 +1,151 @@ +# Project: zlib_1_03 +# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430 +# test works out-of-the-box, installs `somewhere' on demand + +# Toolflags: +CCflags = -c -depend !Depend -IC: -g -throwback -DRISCOS -fah +C++flags = -c -depend !Depend -IC: -throwback +Linkflags = -aif -c++ -o $@ +ObjAsmflags = -throwback -NoCache -depend !Depend +CMHGflags = +LibFileflags = -c -l -o $@ +Squeezeflags = -o $@ + +# change the line below to where _you_ want the library installed. +libdest = lib:zlib + +# Final targets: +@.lib: @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \ + @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \ + @.o.uncompr @.o.zutil + LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \ + @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \ + @.o.trees @.o.uncompr @.o.zutil +test: @.minigzip @.example @.lib + @copy @.lib @.libc A~C~DF~L~N~P~Q~RS~TV + @echo running tests: hang on. + @/@.minigzip -f -9 libc + @/@.minigzip -d libc-gz + @/@.minigzip -f -1 libc + @/@.minigzip -d libc-gz + @/@.minigzip -h -9 libc + @/@.minigzip -d libc-gz + @/@.minigzip -h -1 libc + @/@.minigzip -d libc-gz + @/@.minigzip -9 libc + @/@.minigzip -d libc-gz + @/@.minigzip -1 libc + @/@.minigzip -d libc-gz + @diff @.lib @.libc + @echo that should have reported '@.lib and @.libc identical' if you have diff. + @/@.example @.fred @.fred + @echo that will have given lots of hello!'s. + +@.minigzip: @.o.minigzip @.lib C:o.Stubs + Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs +@.example: @.o.example @.lib C:o.Stubs + Link $(Linkflags) @.o.example @.lib C:o.Stubs + +install: @.lib + cdir $(libdest) + cdir $(libdest).h + @copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV + @copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV + @copy @.lib $(libdest).lib A~C~DF~L~N~P~Q~RS~TV + @echo okay, installed zlib in $(libdest) + +clean:; remove @.minigzip + remove @.example + remove @.libc + -wipe @.o.* F~r~cV + remove @.fred + +# User-editable dependencies: +.c.o: + cc $(ccflags) -o $@ $< + +# Static dependencies: + +# Dynamic dependencies: +o.example: c.example +o.example: h.zlib +o.example: h.zconf +o.minigzip: c.minigzip +o.minigzip: h.zlib +o.minigzip: h.zconf +o.adler32: c.adler32 +o.adler32: h.zlib +o.adler32: h.zconf +o.compress: c.compress +o.compress: h.zlib +o.compress: h.zconf +o.crc32: c.crc32 +o.crc32: h.zlib +o.crc32: h.zconf +o.deflate: c.deflate +o.deflate: h.deflate +o.deflate: h.zutil +o.deflate: h.zlib +o.deflate: h.zconf +o.gzio: c.gzio +o.gzio: h.zutil +o.gzio: h.zlib +o.gzio: h.zconf +o.infblock: c.infblock +o.infblock: h.zutil +o.infblock: h.zlib +o.infblock: h.zconf +o.infblock: h.infblock +o.infblock: h.inftrees +o.infblock: h.infcodes +o.infblock: h.infutil +o.infcodes: c.infcodes +o.infcodes: h.zutil +o.infcodes: h.zlib +o.infcodes: h.zconf +o.infcodes: h.inftrees +o.infcodes: h.infblock +o.infcodes: h.infcodes +o.infcodes: h.infutil +o.infcodes: h.inffast +o.inffast: c.inffast +o.inffast: h.zutil +o.inffast: h.zlib +o.inffast: h.zconf +o.inffast: h.inftrees +o.inffast: h.infblock +o.inffast: h.infcodes +o.inffast: h.infutil +o.inffast: h.inffast +o.inflate: c.inflate +o.inflate: h.zutil +o.inflate: h.zlib +o.inflate: h.zconf +o.inflate: h.infblock +o.inftrees: c.inftrees +o.inftrees: h.zutil +o.inftrees: h.zlib +o.inftrees: h.zconf +o.inftrees: h.inftrees +o.inftrees: h.inffixed +o.infutil: c.infutil +o.infutil: h.zutil +o.infutil: h.zlib +o.infutil: h.zconf +o.infutil: h.infblock +o.infutil: h.inftrees +o.infutil: h.infcodes +o.infutil: h.infutil +o.trees: c.trees +o.trees: h.deflate +o.trees: h.zutil +o.trees: h.zlib +o.trees: h.zconf +o.trees: h.trees +o.uncompr: c.uncompr +o.uncompr: h.zlib +o.uncompr: h.zconf +o.zutil: c.zutil +o.zutil: h.zutil +o.zutil: h.zlib +o.zutil: h.zconf diff --git a/common/dist/zlib/old/README b/common/dist/zlib/old/README new file mode 100644 index 000000000..800bf0798 --- /dev/null +++ b/common/dist/zlib/old/README @@ -0,0 +1,3 @@ +This directory contains files that have not been updated for zlib 1.2.x + +(Volunteers are encouraged to help clean this up. Thanks.) diff --git a/common/dist/zlib/old/descrip.mms b/common/dist/zlib/old/descrip.mms new file mode 100644 index 000000000..7066da5b5 --- /dev/null +++ b/common/dist/zlib/old/descrip.mms @@ -0,0 +1,48 @@ +# descrip.mms: MMS description file for building zlib on VMS +# written by Martin P.J. Zinser + +cc_defs = +c_deb = + +.ifdef __DECC__ +pref = /prefix=all +.endif + +OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\ + deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\ + inftrees.obj, infcodes.obj, infutil.obj, inffast.obj + +CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF) + +all : example.exe minigzip.exe + @ write sys$output " Example applications available" +libz.olb : libz.olb($(OBJS)) + @ write sys$output " libz available" + +example.exe : example.obj libz.olb + link example,libz.olb/lib + +minigzip.exe : minigzip.obj libz.olb + link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib + +clean : + delete *.obj;*,libz.olb;* + + +# Other dependencies. +adler32.obj : zutil.h zlib.h zconf.h +compress.obj : zlib.h zconf.h +crc32.obj : zutil.h zlib.h zconf.h +deflate.obj : deflate.h zutil.h zlib.h zconf.h +example.obj : zlib.h zconf.h +gzio.obj : zutil.h zlib.h zconf.h +infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h +infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h +inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h +inflate.obj : zutil.h zlib.h zconf.h infblock.h +inftrees.obj : zutil.h zlib.h zconf.h inftrees.h +infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h +minigzip.obj : zlib.h zconf.h +trees.obj : deflate.h zutil.h zlib.h zconf.h +uncompr.obj : zlib.h zconf.h +zutil.obj : zutil.h zlib.h zconf.h diff --git a/common/dist/zlib/old/os2/Makefile.os2 b/common/dist/zlib/old/os2/Makefile.os2 new file mode 100644 index 000000000..a105aaa5b --- /dev/null +++ b/common/dist/zlib/old/os2/Makefile.os2 @@ -0,0 +1,136 @@ +# Makefile for zlib under OS/2 using GCC (PGCC) +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile and test, type: +# cp Makefile.os2 .. +# cd .. +# make -f Makefile.os2 test + +# This makefile will build a static library z.lib, a shared library +# z.dll and a import library zdll.lib. You can use either z.lib or +# zdll.lib by specifying either -lz or -lzdll on gcc's command line + +CC=gcc -Zomf -s + +CFLAGS=-O6 -Wall +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-g -DDEBUG +#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ +# -Wstrict-prototypes -Wmissing-prototypes + +#################### BUG WARNING: ##################### +## infcodes.c hits a bug in pgcc-1.0, so you have to use either +## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem) +## This bug is reportedly fixed in pgcc >1.0, but this was not tested +CFLAGS+=-fno-force-mem + +LDFLAGS=-s -L. -lzdll -Zcrtdll +LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll + +VER=1.1.0 +ZLIB=z.lib +SHAREDLIB=z.dll +SHAREDLIBIMP=zdll.lib +LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP) + +AR=emxomfar cr +IMPLIB=emximp +RANLIB=echo +TAR=tar +SHELL=bash + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \ + zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o + +TEST_OBJS = example.o minigzip.o + +DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \ + algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \ + nt/Makefile.nt nt/zlib.dnt contrib/README.contrib contrib/*.txt \ + contrib/asm386/*.asm contrib/asm386/*.c \ + contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \ + contrib/iostream/*.h contrib/iostream2/*.h contrib/iostream2/*.cpp \ + contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 + +all: example.exe minigzip.exe + +test: all + @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \ + echo hello world | ./minigzip | ./minigzip -d || \ + echo ' *** minigzip test FAILED ***' ; \ + if ./example; then \ + echo ' *** zlib test OK ***'; \ + else \ + echo ' *** zlib test FAILED ***'; \ + fi + +$(ZLIB): $(OBJS) + $(AR) $@ $(OBJS) + -@ ($(RANLIB) $@ || true) >/dev/null 2>&1 + +$(SHAREDLIB): $(OBJS) os2/z.def + $(LDSHARED) -o $@ $^ + +$(SHAREDLIBIMP): os2/z.def + $(IMPLIB) -o $@ $^ + +example.exe: example.o $(LIBS) + $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS) + +minigzip.exe: minigzip.o $(LIBS) + $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS) + +clean: + rm -f *.o *~ example minigzip libz.a libz.so* foo.gz + +distclean: clean + +zip: + mv Makefile Makefile~; cp -p Makefile.in Makefile + rm -f test.c ztest*.c + v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\ + zip -ul9 zlib$$v $(DISTFILES) + mv Makefile~ Makefile + +dist: + mv Makefile Makefile~; cp -p Makefile.in Makefile + rm -f test.c ztest*.c + d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\ + rm -f $$d.tar.gz; \ + if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \ + files=""; \ + for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \ + cd ..; \ + GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \ + if test ! -d $$d; then rm -f $$d; fi + mv Makefile~ Makefile + +tags: + etags *.[ch] + +depend: + makedepend -- $(CFLAGS) -- *.[ch] + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +example.o: zlib.h zconf.h +gzio.o: zutil.h zlib.h zconf.h +infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h +infcodes.o: zutil.h zlib.h zconf.h +infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h +inffast.o: infblock.h infcodes.h infutil.h inffast.h +inflate.o: zutil.h zlib.h zconf.h infblock.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h +minigzip.o: zlib.h zconf.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/common/dist/zlib/old/os2/zlib.def b/common/dist/zlib/old/os2/zlib.def new file mode 100644 index 000000000..4c753f1a3 --- /dev/null +++ b/common/dist/zlib/old/os2/zlib.def @@ -0,0 +1,51 @@ +; +; Slightly modified version of ../nt/zlib.dnt :-) +; + +LIBRARY Z +DESCRIPTION "Zlib compression library for OS/2" +CODE PRELOAD MOVEABLE DISCARDABLE +DATA PRELOAD MOVEABLE MULTIPLE + +EXPORTS + adler32 + compress + crc32 + deflate + deflateCopy + deflateEnd + deflateInit2_ + deflateInit_ + deflateParams + deflateReset + deflateSetDictionary + gzclose + gzdopen + gzerror + gzflush + gzopen + gzread + gzwrite + inflate + inflateEnd + inflateInit2_ + inflateInit_ + inflateReset + inflateSetDictionary + inflateSync + uncompress + zlibVersion + gzprintf + gzputc + gzgetc + gzseek + gzrewind + gztell + gzeof + gzsetparams + zError + inflateSyncPoint + get_crc_table + compress2 + gzputs + gzgets diff --git a/common/dist/zlib/old/visual-basic.txt b/common/dist/zlib/old/visual-basic.txt new file mode 100644 index 000000000..57efe5812 --- /dev/null +++ b/common/dist/zlib/old/visual-basic.txt @@ -0,0 +1,160 @@ +See below some functions declarations for Visual Basic. + +Frequently Asked Question: + +Q: Each time I use the compress function I get the -5 error (not enough + room in the output buffer). + +A: Make sure that the length of the compressed buffer is passed by + reference ("as any"), not by value ("as long"). Also check that + before the call of compress this length is equal to the total size of + the compressed buffer and not zero. + + +From: "Jon Caruana" +Subject: Re: How to port zlib declares to vb? +Date: Mon, 28 Oct 1996 18:33:03 -0600 + +Got the answer! (I haven't had time to check this but it's what I got, and +looks correct): + +He has the following routines working: + compress + uncompress + gzopen + gzwrite + gzread + gzclose + +Declares follow: (Quoted from Carlos Rios , in Vb4 form) + +#If Win16 Then 'Use Win16 calls. +Declare Function compress Lib "ZLIB.DLL" (ByVal compr As + String, comprLen As Any, ByVal buf As String, ByVal buflen + As Long) As Integer +Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr + As String, uncomprLen As Any, ByVal compr As String, ByVal + lcompr As Long) As Integer +Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As + String, ByVal mode As String) As Long +Declare Function gzread Lib "ZLIB.DLL" (ByVal file As + Long, ByVal uncompr As String, ByVal uncomprLen As Integer) + As Integer +Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As + Long, ByVal uncompr As String, ByVal uncomprLen As Integer) + As Integer +Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As + Long) As Integer +#Else +Declare Function compress Lib "ZLIB32.DLL" + (ByVal compr As String, comprLen As Any, ByVal buf As + String, ByVal buflen As Long) As Integer +Declare Function uncompress Lib "ZLIB32.DLL" + (ByVal uncompr As String, uncomprLen As Any, ByVal compr As + String, ByVal lcompr As Long) As Long +Declare Function gzopen Lib "ZLIB32.DLL" + (ByVal file As String, ByVal mode As String) As Long +Declare Function gzread Lib "ZLIB32.DLL" + (ByVal file As Long, ByVal uncompr As String, ByVal + uncomprLen As Long) As Long +Declare Function gzwrite Lib "ZLIB32.DLL" + (ByVal file As Long, ByVal uncompr As String, ByVal + uncomprLen As Long) As Long +Declare Function gzclose Lib "ZLIB32.DLL" + (ByVal file As Long) As Long +#End If + +-Jon Caruana +jon-net@usa.net +Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member + + +Here is another example from Michael that he +says conforms to the VB guidelines, and that solves the problem of not +knowing the uncompressed size by storing it at the end of the file: + +'Calling the functions: +'bracket meaning: [optional] {Range of possible values} +'Call subCompressFile( [, , [level of compression {1..9}]]) +'Call subUncompressFile() + +Option Explicit +Private lngpvtPcnSml As Long 'Stores value for 'lngPercentSmaller' +Private Const SUCCESS As Long = 0 +Private Const strFilExt As String = ".cpr" +Private Declare Function lngfncCpr Lib "zlib.dll" Alias "compress2" (ByRef +dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long, +ByVal level As Integer) As Long +Private Declare Function lngfncUcp Lib "zlib.dll" Alias "uncompress" (ByRef +dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long) +As Long + +Public Sub subCompressFile(ByVal strargOriFilPth As String, Optional ByVal +strargCprFilPth As String, Optional ByVal intLvl As Integer = 9) + Dim strCprPth As String + Dim lngOriSiz As Long + Dim lngCprSiz As Long + Dim bytaryOri() As Byte + Dim bytaryCpr() As Byte + lngOriSiz = FileLen(strargOriFilPth) + ReDim bytaryOri(lngOriSiz - 1) + Open strargOriFilPth For Binary Access Read As #1 + Get #1, , bytaryOri() + Close #1 + strCprPth = IIf(strargCprFilPth = "", strargOriFilPth, strargCprFilPth) +'Select file path and name + strCprPth = strCprPth & IIf(Right(strCprPth, Len(strFilExt)) = +strFilExt, "", strFilExt) 'Add file extension if not exists + lngCprSiz = (lngOriSiz * 1.01) + 12 'Compression needs temporary a bit +more space then original file size + ReDim bytaryCpr(lngCprSiz - 1) + If lngfncCpr(bytaryCpr(0), lngCprSiz, bytaryOri(0), lngOriSiz, intLvl) = +SUCCESS Then + lngpvtPcnSml = (1# - (lngCprSiz / lngOriSiz)) * 100 + ReDim Preserve bytaryCpr(lngCprSiz - 1) + Open strCprPth For Binary Access Write As #1 + Put #1, , bytaryCpr() + Put #1, , lngOriSiz 'Add the the original size value to the end +(last 4 bytes) + Close #1 + Else + MsgBox "Compression error" + End If + Erase bytaryCpr + Erase bytaryOri +End Sub + +Public Sub subUncompressFile(ByVal strargFilPth As String) + Dim bytaryCpr() As Byte + Dim bytaryOri() As Byte + Dim lngOriSiz As Long + Dim lngCprSiz As Long + Dim strOriPth As String + lngCprSiz = FileLen(strargFilPth) + ReDim bytaryCpr(lngCprSiz - 1) + Open strargFilPth For Binary Access Read As #1 + Get #1, , bytaryCpr() + Close #1 + 'Read the original file size value: + lngOriSiz = bytaryCpr(lngCprSiz - 1) * (2 ^ 24) _ + + bytaryCpr(lngCprSiz - 2) * (2 ^ 16) _ + + bytaryCpr(lngCprSiz - 3) * (2 ^ 8) _ + + bytaryCpr(lngCprSiz - 4) + ReDim Preserve bytaryCpr(lngCprSiz - 5) 'Cut of the original size value + ReDim bytaryOri(lngOriSiz - 1) + If lngfncUcp(bytaryOri(0), lngOriSiz, bytaryCpr(0), lngCprSiz) = SUCCESS +Then + strOriPth = Left(strargFilPth, Len(strargFilPth) - Len(strFilExt)) + Open strOriPth For Binary Access Write As #1 + Put #1, , bytaryOri() + Close #1 + Else + MsgBox "Uncompression error" + End If + Erase bytaryCpr + Erase bytaryOri +End Sub +Public Property Get lngPercentSmaller() As Long + lngPercentSmaller = lngpvtPcnSml +End Property diff --git a/common/dist/zlib/old/zlib.html b/common/dist/zlib/old/zlib.html new file mode 100644 index 000000000..8c1b190c3 --- /dev/null +++ b/common/dist/zlib/old/zlib.html @@ -0,0 +1,971 @@ + + + + zlib general purpose compression library version 1.1.4 + + + + + +

zlib 1.1.4 Manual

+
+

Contents

+
    +
  1. Prologue +
  2. Introduction +
  3. Utility functions +
  4. Basic functions +
  5. Advanced functions +
  6. Constants +
  7. struct z_stream_s +
  8. Checksum functions +
  9. Misc +
+
+

Prologue

+ 'zlib' general purpose compression library version 1.1.4, March 11th, 2002 +

+ Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler +

+ This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. +

+ Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: +

    +
  1. The origin of this software must not be misrepresented ; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. +
  2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. +
  3. This notice may not be removed or altered from any source distribution. +
+ +
+
Jean-loup Gailly +
jloup@gzip.org +
Mark Adler +
madler@alumni.caltech.edu +
+ + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files + + ftp://ds.internic.net/rfc/rfc1950.txt + (zlib format), + + rfc1951.txt + (deflate format) and + + rfc1952.txt + (gzip format). +

+ This manual is converted from zlib.h by + piaip +

+ Visit + http://ftp.cdrom.com/pub/infozip/zlib/ + for the official zlib web page. +

+ +

+

Introduction

+ The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms will be added later and will have the same + stream interface. +

+ + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. +

+ + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio. +

+ + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. +

+ +

+

Utility functions

+ The following utility functions are implemented on top of the + basic stream-oriented functions. + To simplify the interface, some + default options are assumed (compression level and memory usage, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. +

Function list

+
    +
  • int compress (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen); +
  • int compress2 (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level); +
  • int uncompress (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen); +
  • typedef voidp gzFile; +
  • gzFile gzopen (const char *path, const char *mode); +
  • gzFile gzdopen (int fd, const char *mode); +
  • int gzsetparams (gzFile file, int level, int strategy); +
  • int gzread (gzFile file, voidp buf, unsigned len); +
  • int gzwrite (gzFile file, const voidp buf, unsigned len); +
  • int VA gzprintf (gzFile file, const char *format, ...); +
  • int gzputs (gzFile file, const char *s); +
  • char * gzgets (gzFile file, char *buf, int len); +
  • int gzputc (gzFile file, int c); +
  • int gzgetc (gzFile file); +
  • int gzflush (gzFile file, int flush); +
  • z_off_t gzseek (gzFile file, z_off_t offset, int whence); +
  • z_off_t gztell (gzFile file); +
  • int gzrewind (gzFile file); +
  • int gzeof (gzFile file); +
  • int gzclose (gzFile file); +
  • const char * gzerror (gzFile file, int *errnum); +
+

Function description

+
+
int compress (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen); +
+ Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be at least 0.1% larger than + sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the + compressed buffer.

+ This function can be used to compress a whole file at once if the + input file is mmap'ed.

+ compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer.

+ +

int compress2 (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level); +
+ Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least 0.1% larger than sourceLen plus + 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. +

+ + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +

+ +

int uncompress (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen); +
+ Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer.

+ This function can be used to decompress a whole file at once if the + input file is mmap'ed. +

+ + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +

+ +

typedef voidp gzFile; +

+ +

gzFile gzopen (const char *path, const char *mode); +
+ Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb") but can also include a compression level + ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for + Huffman only compression as in "wb1h". (See the description + of deflateInit2 for more information about the strategy parameter.) +

+ + gzopen can be used to read a file which is not in gzip format ; in this + case gzread will directly read from the file without decompression. +

+ + gzopen returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state ; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). +

+ +

gzFile gzdopen (int fd, const char *mode); +
+ gzdopen() associates a gzFile with the file descriptor fd. File + descriptors are obtained from calls like open, dup, creat, pipe or + fileno (in the file has been previously opened with fopen). + The mode parameter is as in gzopen. +

+ The next call of gzclose on the returned gzFile will also close the + file descriptor fd, just like fclose(fdopen(fd), mode) closes the file + descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). +

+ gzdopen returns NULL if there was insufficient memory to allocate + the (de)compression state. +

+ +

int gzsetparams (gzFile file, int level, int strategy); +
+ Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. +

+ gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +

+ +

int gzread (gzFile file, voidp buf, unsigned len); +
+ Reads the given number of uncompressed bytes from the compressed file. + If the input file was not in gzip format, gzread copies the given number + of bytes into the buffer. +

+ gzread returns the number of uncompressed bytes actually read (0 for + end of file, -1 for error). +

+ +

int gzwrite (gzFile file, const voidp buf, unsigned len); +
+ Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes actually written + (0 in case of error). +

+ +

int VA gzprintf (gzFile file, const char *format, ...); +
+ Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). +

+ +

int gzputs (gzFile file, const char *s); +
+ Writes the given null-terminated string to the compressed file, excluding + the terminating null character. +

+ gzputs returns the number of characters written, or -1 in case of error. +

+ +

char * gzgets (gzFile file, char *buf, int len); +
+ Reads bytes from the compressed file until len-1 characters are read, or + a newline character is read and transferred to buf, or an end-of-file + condition is encountered. The string is then terminated with a null + character. +

+ gzgets returns buf, or Z_NULL in case of error. +

+ +

int gzputc (gzFile file, int c); +
+ Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +

+ +

int gzgetc (gzFile file); +
+ Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +

+ +

int gzflush (gzFile file, int flush); +
+ Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. The return value is the zlib + error number (see function gzerror below). gzflush returns Z_OK if + the flush parameter is Z_FINISH and all output could be flushed. +

+ gzflush should be called only when strictly necessary because it can + degrade compression. +

+ +

z_off_t gzseek (gzFile file, z_off_t offset, int whence); +
+ Sets the starting position for the next gzread or gzwrite on the + given compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. +

+ If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported ; gzseek then compresses a sequence of zeroes up to the new + starting position. +

+ gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +

+ +

int gzrewind (gzFile file); +
+ Rewinds the given file. This function is supported only for reading. +

+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +

+ +

z_off_t gztell (gzFile file); +
+ Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. +

+ + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +

+ +

int gzeof (gzFile file); +
+ Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +

+ +

int gzclose (gzFile file); +
+ Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. The return value is the zlib + error number (see function gzerror below). +

+ +

const char * gzerror (gzFile file, int *errnum); +
+ Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +

+

+
+

Basic functions

+

Function list

+ + +

Function description

+
+
const char * zlibVersion (void); +
The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. +

+ +

int deflateInit (z_streamp strm, int level); +
+ Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. +

+ + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at + all (the input data is simply copied a block at a time). +

+ + Z_DEFAULT_COMPRESSION requests a default compromise between speed and + compression (currently equivalent to level 6). +

+ + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level, + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +

+ +

int deflate (z_streamp strm, int flush); +
+ deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce some + output latency (reading input without producing any output) except when + forced to flush.

+ + The detailed semantics are as follows. deflate performs one or both of the + following actions: + +

    +
  • Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + +
  • + Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. +

+ + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly ; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK + and with zero avail_out, it must be called again after making room in the + output buffer because there might be more output pending. +

+ + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In particular + avail_in is zero after the call if enough output space has been provided + before the call.) Flushing may degrade compression for some compression + algorithms and so it should be used only when necessary. +

+ + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + the compression. +

+ + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). +

+ + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space ; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. +

+ + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + 0.1% larger than avail_in plus 12 bytes. If deflate does not return + Z_STREAM_END, then it must be called again as described above. +

+ + deflate() sets strm-> adler to the adler32 checksum of all input read + so far (that is, total_in bytes). +

+ + deflate() may update data_type if it can make a good guess about + the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. +

+ + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). +

+ +

int deflateEnd (z_streamp strm); +
+ All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. +

+ + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, + msg may be set but then points to a static string (which must not be + deallocated). +

+ +

int inflateInit (z_streamp strm); +
+ Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the exact + value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly ; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. +

+ + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller. msg is set to null if there is no error + message. inflateInit does not perform any decompression apart from reading + the zlib header if present: this will be done by inflate(). (So next_in and + avail_in may be modified, but next_out and avail_out are unchanged.) +

+ +

int inflate (z_streamp strm, int flush); +
+ inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may some + introduce some output latency (reading input without producing any output) + except when forced to flush. +

+ + The detailed semantics are as follows. inflate performs one or both of the + following actions: + +

    +
  • Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + +
  • Provide more output starting at next_out and update next_out and + avail_out accordingly. inflate() provides as much output as possible, + until there is no more input data or no more space in the output buffer + (see below about the flush parameter). +

+ + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. +

+ + If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much + output as possible to the output buffer. The flushing behavior of inflate is + not specified for values of the flush parameter other than Z_SYNC_FLUSH + and Z_FINISH, but the current implementation actually flushes as much output + as possible anyway. +

+ + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed ; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster routine + may be used for the single inflate() call. +

+ + If a preset dictionary is needed at this point (see inflateSetDictionary + below), inflate sets strm-adler to the adler32 checksum of the + dictionary chosen by the compressor and returns Z_NEED_DICT ; otherwise + it sets strm-> adler to the adler32 checksum of all output produced + so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or + an error code as described below. At the end of the stream, inflate() + checks that its computed adler32 checksum is equal to that saved by the + compressor and returns Z_STREAM_END only if the checksum is correct. +

+ + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect + adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent + (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if no progress is possible or if there was not + enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR + case, the application may then call inflateSync to look for a good + compression block. +

+ +

int inflateEnd (z_streamp strm); +
+ All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. +

+ + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +

+
+

Advanced functions

+ The following functions are needed only in some special applications. +

Function list

+ +

Function description

+
+
int deflateInit2 (z_streamp strm, int level, int method, int windowBits, int memLevel, int strategy); + +
This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by + the caller.

+ + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library.

+ + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead.

+ + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio ; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel.

+ + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match). Filtered data consists mostly of small values with a + somewhat random distribution. In this case, the compression algorithm is + tuned to compress them better. The effect of Z_FILTERED is to force more + Huffman coding and less string matching ; it is somewhat intermediate + between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects + the compression ratio but not the correctness of the compressed output even + if it is not set appropriately.

+ + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid + method). msg is set to null if there is no error message. deflateInit2 does + not perform any compression: this will be done by deflate().

+ +

int deflateSetDictionary (z_streamp strm, const Bytef *dictionary, uInt dictLength); +
+ Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any + call of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary).

+ + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy ; the data can then be compressed better than + with the default empty dictionary.

+ + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size in + deflate or deflate2. Thus the strings most likely to be useful should be + put at the end of the dictionary, not at the front.

+ + Upon return of this function, strm-> adler is set to the Adler32 value + of the dictionary ; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The Adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.)

+ + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate().

+ +

int deflateCopy (z_streamp dest, z_streamp source); +
+ Sets the destination stream as a complete copy of the source stream.

+ + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory.

+ + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination.

+ +

int deflateReset (z_streamp strm); +
This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2.

+ + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL).

+ +

int deflateParams (z_streamp strm, int level, int strategy); +
+ Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different + strategy. If the compression level is changed, the input available so far + is compressed with the old level (and may be flushed); the new level will + take effect only at the next call of deflate().

+ + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to + be compressed and flushed. In particular, strm-> avail_out must be + non-zero.

+ + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR + if strm->avail_out was zero.

+ +

int inflateInit2 (z_streamp strm, int windowBits); + +
This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller.

+ + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. If a compressed stream with a larger window size is given as + input, inflate() will return with the error code Z_DATA_ERROR instead of + trying to allocate a larger window.

+ + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative + memLevel). msg is set to null if there is no error message. inflateInit2 + does not perform any decompression apart from reading the zlib header if + present: this will be done by inflate(). (So next_in and avail_in may be + modified, but next_out and avail_out are unchanged.)

+ +

int inflateSetDictionary (z_streamp strm, const Bytef *dictionary, uInt dictLength); +
+ Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate + if this call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the Adler32 value returned by this call of + inflate. The compressor and decompressor must use exactly the same + dictionary (see deflateSetDictionary).

+ + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect Adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate().

+ +

int inflateSync (z_streamp strm); + +
Skips invalid compressed data until a full flush point (see above the + description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided.

+ + inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no flush point has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data.

+ +

int inflateReset (z_streamp strm); +
+ This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. +

+ + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +

+

+ +
+

Checksum functions

+ These functions are not related to compression but are exported + anyway because they might be useful in applications using the + compression library. +

Function list

+ +

Function description

+
+
uLong adler32 (uLong adler, const Bytef *buf, uInt len); +
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. +

+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + 

+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+
+ +
uLong crc32 (uLong crc, const Bytef *buf, uInt len); +
+ Update a running crc with the bytes buf[0..len-1] and return the updated + crc. If buf is NULL, this function returns the required initial value + for the crc. Pre- and post-conditioning (one's complement) is performed + within this function so it shouldn't be done by the application. + Usage example: + 
+
+     uLong crc = crc32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = crc32(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+
+
+
+

struct z_stream_s

+ + +
+typedef struct z_stream_s {
+    Bytef    *next_in;  /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total nb of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total nb of bytes output so far */
+
+    char     *msg;      /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidpf     opaque;  /* private data object passed to zalloc and zfree */
+
+    int     data_type;  /* best guess about the data type: ascii or binary */
+    uLong   adler;      /* adler32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream ;
+
+typedef z_stream FAR * z_streamp;  ÿ
+
+ + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application.

+ + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value.

+ + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe.

+ + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). +

+ + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step).

+ +

+

Constants

+ +
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1
+	/* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_SYNC_FLUSH    2
+#define Z_FULL_FLUSH    3
+#define Z_FINISH        4
+/* Allowed flush values ; see deflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy ; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_ASCII    1
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions less than 1.0.2 */
+
+ + +
+

Misc

+ deflateInit and inflateInit are macros to allow checking the zlib version + and the compiler's view of z_stream. +

+ Other functions: +

+
const char * zError (int err); +
int inflateSyncPoint (z_streamp z); +
const uLongf * get_crc_table (void); +
+
+ + Last update: Wed Oct 13 20:42:34 1999
+ piapi@csie.ntu.edu.tw + + + + diff --git a/common/dist/zlib/projects/README.projects b/common/dist/zlib/projects/README.projects new file mode 100644 index 000000000..1c029e4a3 --- /dev/null +++ b/common/dist/zlib/projects/README.projects @@ -0,0 +1,41 @@ +This directory contains project files for building zlib under various +Integrated Development Environments (IDE). + +If you wish to submit a new project to this directory, you should comply +to the following requirements. Otherwise (e.g. if you wish to integrate +a custom piece of code that changes the zlib interface or its behavior), +please consider submitting the project to the contrib directory. + + +Requirements +============ + +- The project must build zlib using the source files from the official + zlib source distribution, exclusively. + +- If the project produces redistributable builds (e.g. shared objects + or DLL files), these builds must be compatible to those produced by + makefiles, if such makefiles exist in the zlib distribution. + In particular, if the project produces a DLL build for the Win32 + platform, this build must comply to the officially-ammended Win32 DLL + Application Binary Interface (ABI), described in win32/DLL_FAQ.txt. + +- The project may provide additional build targets, which depend on + 3rd-party (unofficially-supported) software, present in the contrib + directory. For example, it is possible to provide an "ASM build", + besides the officially-supported build, and have ASM source files + among its dependencies. + +- If there are significant differences between the project files created + by different versions of an IDE (e.g. Visual C++ 6.0 vs. 7.0), the name + of the project directory should contain the version number of the IDE + for which the project is intended (e.g. "visualc6" for Visual C++ 6.0, + or "visualc7" for Visual C++ 7.0 and 7.1). + + +Current projects +================ + +visualc6/ by Simon-Pierre Cadieux + and Cosmin Truta + Project for Microsoft Visual C++ 6.0 diff --git a/common/dist/zlib/projects/visualc6/README.txt b/common/dist/zlib/projects/visualc6/README.txt new file mode 100644 index 000000000..d0296c272 --- /dev/null +++ b/common/dist/zlib/projects/visualc6/README.txt @@ -0,0 +1,73 @@ +Microsoft Developer Studio Project Files, Format Version 6.00 for zlib. + +Copyright (C) 2000-2004 Simon-Pierre Cadieux. +Copyright (C) 2004 Cosmin Truta. +For conditions of distribution and use, see copyright notice in zlib.h. + + +This project builds the zlib binaries as follows: + +* Win32_DLL_Release\zlib1.dll DLL build +* Win32_DLL_Debug\zlib1d.dll DLL build (debug version) +* Win32_DLL_ASM_Release\zlib1.dll DLL build using ASM code +* Win32_DLL_ASM_Debug\zlib1d.dll DLL build using ASM code (debug version) +* Win32_LIB_Release\zlib.lib static build +* Win32_LIB_Debug\zlibd.lib static build (debug version) +* Win32_LIB_ASM_Release\zlib.lib static build using ASM code +* Win32_LIB_ASM_Debug\zlibd.lib static build using ASM code (debug version) + + +For more information regarding the DLL builds, please see the DLL FAQ +in ..\..\win32\DLL_FAQ.txt. + + +To build and test: + +1) On the main menu, select "File | Open Workspace". + Open "zlib.dsw". + +2) Select "Build | Set Active Configuration". + Choose the configuration you wish to build. + +3) Select "Build | Clean". + +4) Select "Build | Build ... (F7)". Ignore warning messages about + not being able to find certain include files (e.g. alloc.h). + +5) If you built one of the sample programs (example or minigzip), + select "Build | Execute ... (Ctrl+F5)". + + +To use: + +1) Select "Project | Settings (Alt+F7)". + Make note of the configuration names used in your project. + Usually, these names are "Win32 Release" and "Win32 Debug". + +2) In the Workspace window, select the "FileView" tab. + Right-click on the root item "Workspace '...'". + Select "Insert Project into Workspace". + Switch on the checkbox "Dependency of:", and select the name + of your project. Open "zlib.dsp". + +3) Select "Build | Configurations". + For each configuration of your project: + 3.1) Choose the zlib configuration you wish to use. + 3.2) Click on "Add". + 3.3) Set the new zlib configuration name to the name used by + the configuration from the current iteration. + +4) Select "Build | Set Active Configuration". + Choose the configuration you wish to build. + +5) Select "Build | Build ... (F7)". + +6) If you built an executable program, select + "Build | Execute ... (Ctrl+F5)". + + +Note: + +To build the ASM-enabled code, you need Microsoft Assembler +(ML.EXE). You can get it by downloading and installing the +latest Processor Pack for Visual C++ 6.0. diff --git a/common/dist/zlib/projects/visualc6/example.dsp b/common/dist/zlib/projects/visualc6/example.dsp new file mode 100644 index 000000000..e072a37ff --- /dev/null +++ b/common/dist/zlib/projects/visualc6/example.dsp @@ -0,0 +1,278 @@ +# Microsoft Developer Studio Project File - Name="example" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=example - Win32 LIB Debug +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "example.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "example.mak" CFG="example - Win32 LIB Debug" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "example - Win32 DLL Release" (based on "Win32 (x86) Console Application") +!MESSAGE "example - Win32 DLL Debug" (based on "Win32 (x86) Console Application") +!MESSAGE "example - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application") +!MESSAGE "example - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application") +!MESSAGE "example - Win32 LIB Release" (based on "Win32 (x86) Console Application") +!MESSAGE "example - Win32 LIB Debug" (based on "Win32 (x86) Console Application") +!MESSAGE "example - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application") +!MESSAGE "example - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe + +!IF "$(CFG)" == "example - Win32 DLL Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "example___Win32_DLL_Release" +# PROP BASE Intermediate_Dir "example___Win32_DLL_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_DLL_Release" +# PROP Intermediate_Dir "Win32_DLL_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "example - Win32 DLL Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "example___Win32_DLL_Debug" +# PROP BASE Intermediate_Dir "example___Win32_DLL_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_DLL_Debug" +# PROP Intermediate_Dir "Win32_DLL_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept + +!ELSEIF "$(CFG)" == "example - Win32 DLL ASM Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "example___Win32_DLL_ASM_Release" +# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_DLL_ASM_Release" +# PROP Intermediate_Dir "Win32_DLL_ASM_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "example - Win32 DLL ASM Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "example___Win32_DLL_ASM_Debug" +# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_DLL_ASM_Debug" +# PROP Intermediate_Dir "Win32_DLL_ASM_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept + +!ELSEIF "$(CFG)" == "example - Win32 LIB Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "example___Win32_LIB_Release" +# PROP BASE Intermediate_Dir "example___Win32_LIB_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_LIB_Release" +# PROP Intermediate_Dir "Win32_LIB_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "example - Win32 LIB Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "example___Win32_LIB_Debug" +# PROP BASE Intermediate_Dir "example___Win32_LIB_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_LIB_Debug" +# PROP Intermediate_Dir "Win32_LIB_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept + +!ELSEIF "$(CFG)" == "example - Win32 LIB ASM Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "example___Win32_LIB_ASM_Release" +# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_LIB_ASM_Release" +# PROP Intermediate_Dir "Win32_LIB_ASM_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "example - Win32 LIB ASM Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "example___Win32_LIB_ASM_Debug" +# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_LIB_ASM_Debug" +# PROP Intermediate_Dir "Win32_LIB_ASM_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept + +!ENDIF + +# Begin Target + +# Name "example - Win32 DLL Release" +# Name "example - Win32 DLL Debug" +# Name "example - Win32 DLL ASM Release" +# Name "example - Win32 DLL ASM Debug" +# Name "example - Win32 LIB Release" +# Name "example - Win32 LIB Debug" +# Name "example - Win32 LIB ASM Release" +# Name "example - Win32 LIB ASM Debug" +# Begin Group "Source Files" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat" +# Begin Source File + +SOURCE=..\..\example.c +# End Source File +# End Group +# Begin Group "Header Files" + +# PROP Default_Filter "h;hpp;hxx;hm;inl" +# Begin Source File + +SOURCE=..\..\zconf.h +# End Source File +# Begin Source File + +SOURCE=..\..\zlib.h +# End Source File +# End Group +# End Target +# End Project diff --git a/common/dist/zlib/projects/visualc6/minigzip.dsp b/common/dist/zlib/projects/visualc6/minigzip.dsp new file mode 100644 index 000000000..f32024eaf --- /dev/null +++ b/common/dist/zlib/projects/visualc6/minigzip.dsp @@ -0,0 +1,278 @@ +# Microsoft Developer Studio Project File - Name="minigzip" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=minigzip - Win32 LIB Debug +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "minigzip.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "minigzip.mak" CFG="minigzip - Win32 LIB Debug" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "minigzip - Win32 DLL Release" (based on "Win32 (x86) Console Application") +!MESSAGE "minigzip - Win32 DLL Debug" (based on "Win32 (x86) Console Application") +!MESSAGE "minigzip - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application") +!MESSAGE "minigzip - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application") +!MESSAGE "minigzip - Win32 LIB Release" (based on "Win32 (x86) Console Application") +!MESSAGE "minigzip - Win32 LIB Debug" (based on "Win32 (x86) Console Application") +!MESSAGE "minigzip - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application") +!MESSAGE "minigzip - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe + +!IF "$(CFG)" == "minigzip - Win32 DLL Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "minigzip___Win32_DLL_Release" +# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_DLL_Release" +# PROP Intermediate_Dir "Win32_DLL_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "minigzip - Win32 DLL Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "minigzip___Win32_DLL_Debug" +# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_DLL_Debug" +# PROP Intermediate_Dir "Win32_DLL_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept + +!ELSEIF "$(CFG)" == "minigzip - Win32 DLL ASM Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Release" +# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_DLL_ASM_Release" +# PROP Intermediate_Dir "Win32_DLL_ASM_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "minigzip - Win32 DLL ASM Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Debug" +# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_DLL_ASM_Debug" +# PROP Intermediate_Dir "Win32_DLL_ASM_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept + +!ELSEIF "$(CFG)" == "minigzip - Win32 LIB Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "minigzip___Win32_LIB_Release" +# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_LIB_Release" +# PROP Intermediate_Dir "Win32_LIB_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "minigzip - Win32 LIB Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "minigzip___Win32_LIB_Debug" +# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_LIB_Debug" +# PROP Intermediate_Dir "Win32_LIB_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept + +!ELSEIF "$(CFG)" == "minigzip - Win32 LIB ASM Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Release" +# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_LIB_ASM_Release" +# PROP Intermediate_Dir "Win32_LIB_ASM_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "minigzip - Win32 LIB ASM Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Debug" +# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_LIB_ASM_Debug" +# PROP Intermediate_Dir "Win32_LIB_ASM_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept + +!ENDIF + +# Begin Target + +# Name "minigzip - Win32 DLL Release" +# Name "minigzip - Win32 DLL Debug" +# Name "minigzip - Win32 DLL ASM Release" +# Name "minigzip - Win32 DLL ASM Debug" +# Name "minigzip - Win32 LIB Release" +# Name "minigzip - Win32 LIB Debug" +# Name "minigzip - Win32 LIB ASM Release" +# Name "minigzip - Win32 LIB ASM Debug" +# Begin Group "Source Files" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat" +# Begin Source File + +SOURCE=..\..\minigzip.c +# End Source File +# End Group +# Begin Group "Header Files" + +# PROP Default_Filter "h;hpp;hxx;hm;inl" +# Begin Source File + +SOURCE=..\..\zconf.h +# End Source File +# Begin Source File + +SOURCE=..\..\zlib.h +# End Source File +# End Group +# End Target +# End Project diff --git a/common/dist/zlib/projects/visualc6/zlib.dsp b/common/dist/zlib/projects/visualc6/zlib.dsp new file mode 100644 index 000000000..0fe0604cc --- /dev/null +++ b/common/dist/zlib/projects/visualc6/zlib.dsp @@ -0,0 +1,609 @@ +# Microsoft Developer Studio Project File - Name="zlib" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102 +# TARGTYPE "Win32 (x86) Static Library" 0x0104 + +CFG=zlib - Win32 LIB Debug +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "zlib.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "zlib.mak" CFG="zlib - Win32 LIB Debug" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "zlib - Win32 DLL Release" (based on "Win32 (x86) Dynamic-Link Library") +!MESSAGE "zlib - Win32 DLL Debug" (based on "Win32 (x86) Dynamic-Link Library") +!MESSAGE "zlib - Win32 DLL ASM Release" (based on "Win32 (x86) Dynamic-Link Library") +!MESSAGE "zlib - Win32 DLL ASM Debug" (based on "Win32 (x86) Dynamic-Link Library") +!MESSAGE "zlib - Win32 LIB Release" (based on "Win32 (x86) Static Library") +!MESSAGE "zlib - Win32 LIB Debug" (based on "Win32 (x86) Static Library") +!MESSAGE "zlib - Win32 LIB ASM Release" (based on "Win32 (x86) Static Library") +!MESSAGE "zlib - Win32 LIB ASM Debug" (based on "Win32 (x86) Static Library") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" + +!IF "$(CFG)" == "zlib - Win32 DLL Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "zlib___Win32_DLL_Release" +# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_DLL_Release" +# PROP Intermediate_Dir "Win32_DLL_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +CPP=cl.exe +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX /Yc /Yu +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT CPP /YX /Yc /Yu +MTL=midl.exe +# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32 +# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32 +RSC=rc.exe +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386 +# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_Release\zlib1.dll" + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "zlib___Win32_DLL_Debug" +# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_DLL_Debug" +# PROP Intermediate_Dir "Win32_DLL_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +CPP=cl.exe +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX /Yc /Yu +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT CPP /YX /Yc /Yu +MTL=midl.exe +# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32 +# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32 +RSC=rc.exe +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept +# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_Debug\zlib1d.dll" /pdbtype:sept + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Release" +# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_DLL_ASM_Release" +# PROP Intermediate_Dir "Win32_DLL_ASM_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +CPP=cl.exe +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX /Yc /Yu +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c +# SUBTRACT CPP /YX /Yc /Yu +MTL=midl.exe +# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32 +# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32 +RSC=rc.exe +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386 +# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_ASM_Release\zlib1.dll" + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Debug" +# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_DLL_ASM_Debug" +# PROP Intermediate_Dir "Win32_DLL_ASM_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +CPP=cl.exe +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX /Yc /Yu +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FD /GZ /c +# SUBTRACT CPP /YX /Yc /Yu +MTL=midl.exe +# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32 +# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32 +RSC=rc.exe +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept +# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_ASM_Debug\zlib1d.dll" /pdbtype:sept + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "zlib___Win32_LIB_Release" +# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_LIB_Release" +# PROP Intermediate_Dir "Win32_LIB_Release" +# PROP Target_Dir "" +CPP=cl.exe +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX /Yc /Yu +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT CPP /YX /Yc /Yu +RSC=rc.exe +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LIB32=link.exe -lib +# ADD BASE LIB32 /nologo +# ADD LIB32 /nologo + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "zlib___Win32_LIB_Debug" +# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_LIB_Debug" +# PROP Intermediate_Dir "Win32_LIB_Debug" +# PROP Target_Dir "" +CPP=cl.exe +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX /Yc /Yu +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT CPP /YX /Yc /Yu +RSC=rc.exe +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LIB32=link.exe -lib +# ADD BASE LIB32 /nologo +# ADD LIB32 /nologo /out:"Win32_LIB_Debug\zlibd.lib" + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Release" +# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Win32_LIB_ASM_Release" +# PROP Intermediate_Dir "Win32_LIB_ASM_Release" +# PROP Target_Dir "" +CPP=cl.exe +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c +# SUBTRACT BASE CPP /YX /Yc /Yu +# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c +# SUBTRACT CPP /YX /Yc /Yu +RSC=rc.exe +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LIB32=link.exe -lib +# ADD BASE LIB32 /nologo +# ADD LIB32 /nologo + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Debug" +# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Win32_LIB_ASM_Debug" +# PROP Intermediate_Dir "Win32_LIB_ASM_Debug" +# PROP Target_Dir "" +CPP=cl.exe +# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c +# SUBTRACT BASE CPP /YX /Yc /Yu +# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FD /GZ /c +# SUBTRACT CPP /YX /Yc /Yu +RSC=rc.exe +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LIB32=link.exe -lib +# ADD BASE LIB32 /nologo +# ADD LIB32 /nologo /out:"Win32_LIB_ASM_Debug\zlibd.lib" + +!ENDIF + +# Begin Target + +# Name "zlib - Win32 DLL Release" +# Name "zlib - Win32 DLL Debug" +# Name "zlib - Win32 DLL ASM Release" +# Name "zlib - Win32 DLL ASM Debug" +# Name "zlib - Win32 LIB Release" +# Name "zlib - Win32 LIB Debug" +# Name "zlib - Win32 LIB ASM Release" +# Name "zlib - Win32 LIB ASM Debug" +# Begin Group "Source Files" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat" +# Begin Source File + +SOURCE=..\..\adler32.c +# End Source File +# Begin Source File + +SOURCE=..\..\compress.c +# End Source File +# Begin Source File + +SOURCE=..\..\crc32.c +# End Source File +# Begin Source File + +SOURCE=..\..\deflate.c +# End Source File +# Begin Source File + +SOURCE=..\..\gzio.c +# End Source File +# Begin Source File + +SOURCE=..\..\infback.c +# End Source File +# Begin Source File + +SOURCE=..\..\inffast.c +# End Source File +# Begin Source File + +SOURCE=..\..\inflate.c +# End Source File +# Begin Source File + +SOURCE=..\..\inftrees.c +# End Source File +# Begin Source File + +SOURCE=..\..\trees.c +# End Source File +# Begin Source File + +SOURCE=..\..\uncompr.c +# End Source File +# Begin Source File + +SOURCE=..\..\win32\zlib.def + +!IF "$(CFG)" == "zlib - Win32 DLL Release" + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug" + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Release" + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug" + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug" + +# PROP Exclude_From_Build 1 + +!ENDIF + +# End Source File +# Begin Source File + +SOURCE=..\..\zutil.c +# End Source File +# End Group +# Begin Group "Header Files" + +# PROP Default_Filter "h;hpp;hxx;hm;inl" +# Begin Source File + +SOURCE=..\..\crc32.h +# End Source File +# Begin Source File + +SOURCE=..\..\deflate.h +# End Source File +# Begin Source File + +SOURCE=..\..\inffast.h +# End Source File +# Begin Source File + +SOURCE=..\..\inffixed.h +# End Source File +# Begin Source File + +SOURCE=..\..\inflate.h +# End Source File +# Begin Source File + +SOURCE=..\..\inftrees.h +# End Source File +# Begin Source File + +SOURCE=..\..\trees.h +# End Source File +# Begin Source File + +SOURCE=..\..\zconf.h +# End Source File +# Begin Source File + +SOURCE=..\..\zlib.h +# End Source File +# Begin Source File + +SOURCE=..\..\zutil.h +# End Source File +# End Group +# Begin Group "Resource Files" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe" +# Begin Source File + +SOURCE=..\..\win32\zlib1.rc +# End Source File +# End Group +# Begin Group "Assembler Files (Unsupported)" + +# PROP Default_Filter "asm;obj;c;cpp;cxx;h;hpp;hxx" +# Begin Source File + +SOURCE=..\..\contrib\masmx86\gvmat32.asm + +!IF "$(CFG)" == "zlib - Win32 DLL Release" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Release" + +# Begin Custom Build - Assembling... +IntDir=.\Win32_DLL_ASM_Release +InputPath=..\..\contrib\masmx86\gvmat32.asm +InputName=gvmat32 + +"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" + ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)" + +# End Custom Build + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug" + +# Begin Custom Build - Assembling... +IntDir=.\Win32_DLL_ASM_Debug +InputPath=..\..\contrib\masmx86\gvmat32.asm +InputName=gvmat32 + +"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" + ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)" + +# End Custom Build + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release" + +# Begin Custom Build - Assembling... +IntDir=.\Win32_LIB_ASM_Release +InputPath=..\..\contrib\masmx86\gvmat32.asm +InputName=gvmat32 + +"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" + ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)" + +# End Custom Build + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug" + +# Begin Custom Build - Assembling... +IntDir=.\Win32_LIB_ASM_Debug +InputPath=..\..\contrib\masmx86\gvmat32.asm +InputName=gvmat32 + +"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" + ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)" + +# End Custom Build + +!ENDIF + +# End Source File +# Begin Source File + +SOURCE=..\..\contrib\masmx86\gvmat32c.c + +!IF "$(CFG)" == "zlib - Win32 DLL Release" + +# PROP Exclude_From_Build 1 +# ADD CPP /I "..\.." + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug" + +# PROP Exclude_From_Build 1 +# ADD CPP /I "..\.." + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Release" + +# ADD CPP /I "..\.." + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug" + +# ADD CPP /I "..\.." + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release" + +# PROP Exclude_From_Build 1 +# ADD CPP /I "..\.." + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug" + +# PROP Exclude_From_Build 1 +# ADD CPP /I "..\.." + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release" + +# ADD CPP /I "..\.." + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug" + +# ADD CPP /I "..\.." + +!ENDIF + +# End Source File +# Begin Source File + +SOURCE=..\..\contrib\masmx86\inffas32.asm + +!IF "$(CFG)" == "zlib - Win32 DLL Release" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Release" + +# Begin Custom Build - Assembling... +IntDir=.\Win32_DLL_ASM_Release +InputPath=..\..\contrib\masmx86\inffas32.asm +InputName=inffas32 + +"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" + ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)" + +# End Custom Build + +!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug" + +# Begin Custom Build - Assembling... +IntDir=.\Win32_DLL_ASM_Debug +InputPath=..\..\contrib\masmx86\inffas32.asm +InputName=inffas32 + +"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" + ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)" + +# End Custom Build + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug" + +# PROP Exclude_From_Build 1 + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release" + +# Begin Custom Build - Assembling... +IntDir=.\Win32_LIB_ASM_Release +InputPath=..\..\contrib\masmx86\inffas32.asm +InputName=inffas32 + +"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" + ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)" + +# End Custom Build + +!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug" + +# Begin Custom Build - Assembling... +IntDir=.\Win32_LIB_ASM_Debug +InputPath=..\..\contrib\masmx86\inffas32.asm +InputName=inffas32 + +"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" + ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)" + +# End Custom Build + +!ENDIF + +# End Source File +# End Group +# Begin Source File + +SOURCE=.\README.txt +# End Source File +# End Target +# End Project diff --git a/common/dist/zlib/projects/visualc6/zlib.dsw b/common/dist/zlib/projects/visualc6/zlib.dsw new file mode 100644 index 000000000..3a771fce0 --- /dev/null +++ b/common/dist/zlib/projects/visualc6/zlib.dsw @@ -0,0 +1,59 @@ +Microsoft Developer Studio Workspace File, Format Version 6.00 +# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE! + +############################################################################### + +Project: "example"=.\example.dsp - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ + Begin Project Dependency + Project_Dep_Name zlib + End Project Dependency +}}} + +############################################################################### + +Project: "minigzip"=.\minigzip.dsp - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ + Begin Project Dependency + Project_Dep_Name zlib + End Project Dependency +}}} + +############################################################################### + +Project: "zlib"=.\zlib.dsp - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/common/dist/zlib/qnx/package.qpg b/common/dist/zlib/qnx/package.qpg new file mode 100644 index 000000000..8a4a47c72 --- /dev/null +++ b/common/dist/zlib/qnx/package.qpg @@ -0,0 +1,141 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Library + + Medium + + 2.0 + + + + zlib + zlib + alain.bonnefoy@icbt.com + Public + public + www.gzip.org/zlib + + + Jean-Loup Gailly,Mark Adler + www.gzip.org/zlib + + zlib@gzip.org + + + A massively spiffy yet delicately unobtrusive compression library. + zlib is designed to be a free, general-purpose, legally unencumbered, lossless data compression library for use on virtually any computer hardware and operating system. + http://www.gzip.org/zlib + + + + + 1.2.3 + Medium + Stable + + + + + + + No License + + + + Software Development/Libraries and Extensions/C Libraries + zlib,compression + qnx6 + qnx6 + None + Developer + + + + + + + + + + + + + + Install + Post + No + Ignore + + No + Optional + + + + + + + + + + + + + InstallOver + zlib + + + + + + + + + + + + + InstallOver + zlib-dev + + + + + + + + + diff --git a/common/dist/zlib/trees.c b/common/dist/zlib/trees.c new file mode 100644 index 000000000..09726829e --- /dev/null +++ b/common/dist/zlib/trees.c @@ -0,0 +1,1222 @@ +/* $NetBSD: trees.c,v 1.3 2006/01/27 00:45:27 christos Exp $ */ + +/* trees.c -- output deflated data using Huffman coding + * Copyright (C) 1995-2005 Jean-loup Gailly + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * ALGORITHM + * + * The "deflation" process uses several Huffman trees. The more + * common source values are represented by shorter bit sequences. + * + * Each code tree is stored in a compressed form which is itself + * a Huffman encoding of the lengths of all the code strings (in + * ascending order by source values). The actual code strings are + * reconstructed from the lengths in the inflate process, as described + * in the deflate specification. + * + * REFERENCES + * + * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". + * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc + * + * Storer, James A. + * Data Compression: Methods and Theory, pp. 49-50. + * Computer Science Press, 1988. ISBN 0-7167-8156-5. + * + * Sedgewick, R. + * Algorithms, p290. + * Addison-Wesley, 1983. ISBN 0-201-06672-6. + */ + +/* @(#) Id */ + +/* #define GEN_TREES_H */ + +#include "deflate.h" + +#ifdef ZLIB_DEBUG +# include +#endif + +/* =========================================================================== + * Constants + */ + +#define MAX_BL_BITS 7 +/* Bit length codes must not exceed MAX_BL_BITS bits */ + +#define END_BLOCK 256 +/* end of block literal code */ + +#define REP_3_6 16 +/* repeat previous bit length 3-6 times (2 bits of repeat count) */ + +#define REPZ_3_10 17 +/* repeat a zero length 3-10 times (3 bits of repeat count) */ + +#define REPZ_11_138 18 +/* repeat a zero length 11-138 times (7 bits of repeat count) */ + +local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ + = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; + +local const int extra_dbits[D_CODES] /* extra bits for each distance code */ + = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; + +local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */ + = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; + +local const uch bl_order[BL_CODES] + = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; +/* The lengths of the bit length codes are sent in order of decreasing + * probability, to avoid transmitting the lengths for unused bit length codes. + */ + +#define Buf_size (8 * 2*sizeof(char)) +/* Number of bits used within bi_buf. (bi_buf might be implemented on + * more than 16 bits on some systems.) + */ + +/* =========================================================================== + * Local data. These are initialized only once. + */ + +#define DIST_CODE_LEN 512 /* see definition of array dist_code below */ + +#if defined(GEN_TREES_H) || !defined(STDC) +/* non ANSI compilers may not accept trees.h */ + +local ct_data static_ltree[L_CODES+2]; +/* The static literal tree. Since the bit lengths are imposed, there is no + * need for the L_CODES extra codes used during heap construction. However + * The codes 286 and 287 are needed to build a canonical tree (see _tr_init + * below). + */ + +local ct_data static_dtree[D_CODES]; +/* The static distance tree. (Actually a trivial tree since all codes use + * 5 bits.) + */ + +uch _dist_code[DIST_CODE_LEN]; +/* Distance codes. The first 256 values correspond to the distances + * 3 .. 258, the last 256 values correspond to the top 8 bits of + * the 15 bit distances. + */ + +uch _length_code[MAX_MATCH-MIN_MATCH+1]; +/* length code for each normalized match length (0 == MIN_MATCH) */ + +local int base_length[LENGTH_CODES]; +/* First normalized length for each code (0 = MIN_MATCH) */ + +local int base_dist[D_CODES]; +/* First normalized distance for each code (0 = distance of 1) */ + +#else +# include "trees.h" +#endif /* GEN_TREES_H */ + +struct static_tree_desc_s { + const ct_data *static_tree; /* static tree or NULL */ + const intf *extra_bits; /* extra bits for each code or NULL */ + int extra_base; /* base index for extra_bits */ + int elems; /* max number of elements in the tree */ + int max_length; /* max bit length for the codes */ +}; + +local static_tree_desc static_l_desc = +{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS}; + +local static_tree_desc static_d_desc = +{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; + +local static_tree_desc static_bl_desc = +{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; + +/* =========================================================================== + * Local (static) routines in this file. + */ + +local void tr_static_init OF((void)); +local void init_block OF((deflate_state *s)); +local void pqdownheap OF((deflate_state *s, ct_data *tree, int k)); +local void gen_bitlen OF((deflate_state *s, tree_desc *desc)); +local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count)); +local void build_tree OF((deflate_state *s, tree_desc *desc)); +local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code)); +local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); +local int build_bl_tree OF((deflate_state *s)); +local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, + int blcodes)); +local void compress_block OF((deflate_state *s, ct_data *ltree, + ct_data *dtree)); +local void set_data_type OF((deflate_state *s)); +local unsigned bi_reverse OF((unsigned value, int length)); +local void bi_windup OF((deflate_state *s)); +local void bi_flush OF((deflate_state *s)); +local void copy_block OF((deflate_state *s, charf *buf, unsigned len, + int header)); + +#ifdef GEN_TREES_H +local void gen_trees_header OF((void)); +#endif + +#ifndef ZLIB_DEBUG +# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len) + /* Send a code of the given tree. c and tree must not have side effects */ + +#else /* ZLIB_DEBUG */ +# define send_code(s, c, tree) \ + { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ + send_bits(s, tree[c].Code, tree[c].Len); } +#endif + +/* =========================================================================== + * Output a short LSB first on the stream. + * IN assertion: there is enough room in pendingBuf. + */ +#define put_short(s, w) { \ + put_byte(s, (uch)((w) & 0xff)); \ + put_byte(s, (uch)((ush)(w) >> 8)); \ +} + +/* =========================================================================== + * Send a value on a given number of bits. + * IN assertion: length <= 16 and value fits in length bits. + */ +#ifdef ZLIB_DEBUG +local void send_bits OF((deflate_state *s, int value, int length)); + +local void send_bits(s, value, length) + deflate_state *s; + int value; /* value to send */ + int length; /* number of bits */ +{ + Tracevv((stderr," l %2d v %4x ", length, value)); + Assert(length > 0 && length <= 15, "invalid length"); + s->bits_sent += (ulg)length; + + /* If not enough room in bi_buf, use (valid) bits from bi_buf and + * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) + * unused bits in value. + */ + if (s->bi_valid > (int)Buf_size - length) { + s->bi_buf |= (value << s->bi_valid); + put_short(s, s->bi_buf); + s->bi_buf = (ush)value >> (Buf_size - s->bi_valid); + s->bi_valid += length - Buf_size; + } else { + s->bi_buf |= value << s->bi_valid; + s->bi_valid += length; + } +} +#else /* !ZLIB_DEBUG */ + +#define send_bits(s, value, length) \ +{ int len = length;\ + if (s->bi_valid > (int)Buf_size - len) {\ + int val = value;\ + s->bi_buf |= (val << s->bi_valid);\ + put_short(s, s->bi_buf);\ + s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\ + s->bi_valid += len - Buf_size;\ + } else {\ + s->bi_buf |= (value) << s->bi_valid;\ + s->bi_valid += len;\ + }\ +} +#endif /* ZLIB_DEBUG */ + + +/* the arguments must not have side effects */ + +/* =========================================================================== + * Initialize the various 'constant' tables. + */ +local void tr_static_init() +{ +#if defined(GEN_TREES_H) || !defined(STDC) + static int static_init_done = 0; + int n; /* iterates over tree elements */ + int bits; /* bit counter */ + int length; /* length value */ + int code; /* code value */ + int dist; /* distance index */ + ush bl_count[MAX_BITS+1]; + /* number of codes at each bit length for an optimal tree */ + + if (static_init_done) return; + + /* For some embedded targets, global variables are not initialized: */ + static_l_desc.static_tree = static_ltree; + static_l_desc.extra_bits = extra_lbits; + static_d_desc.static_tree = static_dtree; + static_d_desc.extra_bits = extra_dbits; + static_bl_desc.extra_bits = extra_blbits; + + /* Initialize the mapping length (0..255) -> length code (0..28) */ + length = 0; + for (code = 0; code < LENGTH_CODES-1; code++) { + base_length[code] = length; + for (n = 0; n < (1< dist code (0..29) */ + dist = 0; + for (code = 0 ; code < 16; code++) { + base_dist[code] = dist; + for (n = 0; n < (1<>= 7; /* from now on, all distances are divided by 128 */ + for ( ; code < D_CODES; code++) { + base_dist[code] = dist << 7; + for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) { + _dist_code[256 + dist++] = (uch)code; + } + } + Assert (dist == 256, "tr_static_init: 256+dist != 512"); + + /* Construct the codes of the static literal tree */ + for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0; + n = 0; + while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++; + while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++; + while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++; + while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++; + /* Codes 286 and 287 do not exist, but we must include them in the + * tree construction to get a canonical Huffman tree (longest code + * all ones) + */ + gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count); + + /* The static distance tree is trivial: */ + for (n = 0; n < D_CODES; n++) { + static_dtree[n].Len = 5; + static_dtree[n].Code = bi_reverse((unsigned)n, 5); + } + static_init_done = 1; + +# ifdef GEN_TREES_H + gen_trees_header(); +# endif +#endif /* defined(GEN_TREES_H) || !defined(STDC) */ +} + +/* =========================================================================== + * Genererate the file trees.h describing the static trees. + */ +#ifdef GEN_TREES_H +# ifndef ZLIB_DEBUG +# include +# endif + +# define SEPARATOR(i, last, width) \ + ((i) == (last)? "\n};\n\n" : \ + ((i) % (width) == (width)-1 ? ",\n" : ", ")) + +void gen_trees_header() +{ + FILE *header = fopen("trees.h", "w"); + int i; + + Assert (header != NULL, "Can't open trees.h"); + fprintf(header, + "/* header created automatically with -DGEN_TREES_H */\n\n"); + + fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n"); + for (i = 0; i < L_CODES+2; i++) { + fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code, + static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5)); + } + + fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n"); + for (i = 0; i < D_CODES; i++) { + fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code, + static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5)); + } + + fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n"); + for (i = 0; i < DIST_CODE_LEN; i++) { + fprintf(header, "%2u%s", _dist_code[i], + SEPARATOR(i, DIST_CODE_LEN-1, 20)); + } + + fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n"); + for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) { + fprintf(header, "%2u%s", _length_code[i], + SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20)); + } + + fprintf(header, "local const int base_length[LENGTH_CODES] = {\n"); + for (i = 0; i < LENGTH_CODES; i++) { + fprintf(header, "%1u%s", base_length[i], + SEPARATOR(i, LENGTH_CODES-1, 20)); + } + + fprintf(header, "local const int base_dist[D_CODES] = {\n"); + for (i = 0; i < D_CODES; i++) { + fprintf(header, "%5u%s", base_dist[i], + SEPARATOR(i, D_CODES-1, 10)); + } + + fclose(header); +} +#endif /* GEN_TREES_H */ + +/* =========================================================================== + * Initialize the tree data structures for a new zlib stream. + */ +void _tr_init(s) + deflate_state *s; +{ + tr_static_init(); + + s->l_desc.dyn_tree = s->dyn_ltree; + s->l_desc.stat_desc = &static_l_desc; + + s->d_desc.dyn_tree = s->dyn_dtree; + s->d_desc.stat_desc = &static_d_desc; + + s->bl_desc.dyn_tree = s->bl_tree; + s->bl_desc.stat_desc = &static_bl_desc; + + s->bi_buf = 0; + s->bi_valid = 0; + s->last_eob_len = 8; /* enough lookahead for inflate */ +#ifdef ZLIB_DEBUG + s->compressed_len = 0L; + s->bits_sent = 0L; +#endif + + /* Initialize the first block of the first file: */ + init_block(s); +} + +/* =========================================================================== + * Initialize a new block. + */ +local void init_block(s) + deflate_state *s; +{ + int n; /* iterates over tree elements */ + + /* Initialize the trees. */ + for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0; + for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0; + for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0; + + s->dyn_ltree[END_BLOCK].Freq = 1; + s->opt_len = s->static_len = 0L; + s->last_lit = s->matches = 0; +} + +#define SMALLEST 1 +/* Index within the heap array of least frequent node in the Huffman tree */ + + +/* =========================================================================== + * Remove the smallest element from the heap and recreate the heap with + * one less element. Updates heap and heap_len. + */ +#define pqremove(s, tree, top) \ +{\ + top = s->heap[SMALLEST]; \ + s->heap[SMALLEST] = s->heap[s->heap_len--]; \ + pqdownheap(s, tree, SMALLEST); \ +} + +/* =========================================================================== + * Compares to subtrees, using the tree depth as tie breaker when + * the subtrees have equal frequency. This minimizes the worst case length. + */ +#define smaller(tree, n, m, depth) \ + (tree[n].Freq < tree[m].Freq || \ + (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) + +/* =========================================================================== + * Restore the heap property by moving down the tree starting at node k, + * exchanging a node with the smallest of its two sons if necessary, stopping + * when the heap property is re-established (each father smaller than its + * two sons). + */ +local void pqdownheap(s, tree, k) + deflate_state *s; + ct_data *tree; /* the tree to restore */ + int k; /* node to move down */ +{ + int v = s->heap[k]; + int j = k << 1; /* left son of k */ + while (j <= s->heap_len) { + /* Set j to the smallest of the two sons: */ + if (j < s->heap_len && + smaller(tree, s->heap[j+1], s->heap[j], s->depth)) { + j++; + } + /* Exit if v is smaller than both sons */ + if (smaller(tree, v, s->heap[j], s->depth)) break; + + /* Exchange v with the smallest son */ + s->heap[k] = s->heap[j]; k = j; + + /* And continue down the tree, setting j to the left son of k */ + j <<= 1; + } + s->heap[k] = v; +} + +/* =========================================================================== + * Compute the optimal bit lengths for a tree and update the total bit length + * for the current block. + * IN assertion: the fields freq and dad are set, heap[heap_max] and + * above are the tree nodes sorted by increasing frequency. + * OUT assertions: the field len is set to the optimal bit length, the + * array bl_count contains the frequencies for each bit length. + * The length opt_len is updated; static_len is also updated if stree is + * not null. + */ +local void gen_bitlen(s, desc) + deflate_state *s; + tree_desc *desc; /* the tree descriptor */ +{ + ct_data *tree = desc->dyn_tree; + int max_code = desc->max_code; + const ct_data *stree = desc->stat_desc->static_tree; + const intf *extra = desc->stat_desc->extra_bits; + int base = desc->stat_desc->extra_base; + int max_length = desc->stat_desc->max_length; + int h; /* heap index */ + int n, m; /* iterate over the tree elements */ + int bits; /* bit length */ + int xbits; /* extra bits */ + ush f; /* frequency */ + int overflow = 0; /* number of elements with bit length too large */ + + for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0; + + /* In a first pass, compute the optimal bit lengths (which may + * overflow in the case of the bit length tree). + */ + tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */ + + for (h = s->heap_max+1; h < HEAP_SIZE; h++) { + n = s->heap[h]; + bits = tree[tree[n].Dad].Len + 1; + if (bits > max_length) bits = max_length, overflow++; + tree[n].Len = (ush)bits; + /* We overwrite tree[n].Dad which is no longer needed */ + + if (n > max_code) continue; /* not a leaf node */ + + s->bl_count[bits]++; + xbits = 0; + if (n >= base) xbits = extra[n-base]; + f = tree[n].Freq; + s->opt_len += (ulg)f * (bits + xbits); + if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits); + } + if (overflow == 0) return; + + Trace((stderr,"\nbit length overflow\n")); + /* This happens for example on obj2 and pic of the Calgary corpus */ + + /* Find the first bit length which could increase: */ + do { + bits = max_length-1; + while (s->bl_count[bits] == 0) bits--; + s->bl_count[bits]--; /* move one leaf down the tree */ + s->bl_count[bits+1] += 2; /* move one overflow item as its brother */ + s->bl_count[max_length]--; + /* The brother of the overflow item also moves one step up, + * but this does not affect bl_count[max_length] + */ + overflow -= 2; + } while (overflow > 0); + + /* Now recompute all bit lengths, scanning in increasing frequency. + * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all + * lengths instead of fixing only the wrong ones. This idea is taken + * from 'ar' written by Haruhiko Okumura.) + */ + for (bits = max_length; bits != 0; bits--) { + n = s->bl_count[bits]; + while (n != 0) { + m = s->heap[--h]; + if (m > max_code) continue; + if ((unsigned) tree[m].Len != (unsigned) bits) { + Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); + s->opt_len += ((long)bits - (long)tree[m].Len) + *(long)tree[m].Freq; + tree[m].Len = (ush)bits; + } + n--; + } + } +} + +/* =========================================================================== + * Generate the codes for a given tree and bit counts (which need not be + * optimal). + * IN assertion: the array bl_count contains the bit length statistics for + * the given tree and the field len is set for all tree elements. + * OUT assertion: the field code is set for all tree elements of non + * zero code length. + */ +local void gen_codes (tree, max_code, bl_count) + ct_data *tree; /* the tree to decorate */ + int max_code; /* largest code with non zero frequency */ + ushf *bl_count; /* number of codes at each bit length */ +{ + ush next_code[MAX_BITS+1]; /* next code value for each bit length */ + ush code = 0; /* running code value */ + int bits; /* bit index */ + int n; /* code index */ + + /* The distribution counts are first used to generate the code values + * without bit reversal. + */ + for (bits = 1; bits <= MAX_BITS; bits++) { + next_code[bits] = code = (code + bl_count[bits-1]) << 1; + } + /* Check that the bit counts in bl_count are consistent. The last code + * must be all ones. + */ + Assert (code + bl_count[MAX_BITS]-1 == (1<dyn_tree; + const ct_data *stree = desc->stat_desc->static_tree; + int elems = desc->stat_desc->elems; + int n, m; /* iterate over heap elements */ + int max_code = -1; /* largest code with non zero frequency */ + int node; /* new node being created */ + + /* Construct the initial heap, with least frequent element in + * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. + * heap[0] is not used. + */ + s->heap_len = 0, s->heap_max = HEAP_SIZE; + + for (n = 0; n < elems; n++) { + if (tree[n].Freq != 0) { + s->heap[++(s->heap_len)] = max_code = n; + s->depth[n] = 0; + } else { + tree[n].Len = 0; + } + } + + /* The pkzip format requires that at least one distance code exists, + * and that at least one bit should be sent even if there is only one + * possible code. So to avoid special checks later on we force at least + * two codes of non zero frequency. + */ + while (s->heap_len < 2) { + node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0); + tree[node].Freq = 1; + s->depth[node] = 0; + s->opt_len--; if (stree) s->static_len -= stree[node].Len; + /* node is 0 or 1 so it does not have extra bits */ + } + desc->max_code = max_code; + + /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, + * establish sub-heaps of increasing lengths: + */ + for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n); + + /* Construct the Huffman tree by repeatedly combining the least two + * frequent nodes. + */ + node = elems; /* next internal node of the tree */ + do { + pqremove(s, tree, n); /* n = node of least frequency */ + m = s->heap[SMALLEST]; /* m = node of next least frequency */ + + s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */ + s->heap[--(s->heap_max)] = m; + + /* Create a new node father of n and m */ + tree[node].Freq = tree[n].Freq + tree[m].Freq; + s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ? + s->depth[n] : s->depth[m]) + 1); + tree[n].Dad = tree[m].Dad = (ush)node; +#ifdef DUMP_BL_TREE + if (tree == s->bl_tree) { + fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)", + node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); + } +#endif + /* and insert the new node in the heap */ + s->heap[SMALLEST] = node++; + pqdownheap(s, tree, SMALLEST); + + } while (s->heap_len >= 2); + + s->heap[--(s->heap_max)] = s->heap[SMALLEST]; + + /* At this point, the fields freq and dad are set. We can now + * generate the bit lengths. + */ + gen_bitlen(s, (tree_desc *)desc); + + /* The field len is now set, we can generate the bit codes */ + gen_codes ((ct_data *)tree, max_code, s->bl_count); +} + +/* =========================================================================== + * Scan a literal or distance tree to determine the frequencies of the codes + * in the bit length tree. + */ +local void scan_tree (s, tree, max_code) + deflate_state *s; + ct_data *tree; /* the tree to be scanned */ + int max_code; /* and its largest code of non zero frequency */ +{ + int n; /* iterates over all tree elements */ + int prevlen = -1; /* last emitted length */ + int curlen; /* length of current code */ + int nextlen = tree[0].Len; /* length of next code */ + int count = 0; /* repeat count of the current code */ + int max_count = 7; /* max repeat count */ + int min_count = 4; /* min repeat count */ + + if (nextlen == 0) max_count = 138, min_count = 3; + tree[max_code+1].Len = (ush)0xffff; /* guard */ + + for (n = 0; n <= max_code; n++) { + curlen = nextlen; nextlen = tree[n+1].Len; + if (++count < max_count && curlen == nextlen) { + continue; + } else if (count < min_count) { + s->bl_tree[curlen].Freq += count; + } else if (curlen != 0) { + if (curlen != prevlen) s->bl_tree[curlen].Freq++; + s->bl_tree[REP_3_6].Freq++; + } else if (count <= 10) { + s->bl_tree[REPZ_3_10].Freq++; + } else { + s->bl_tree[REPZ_11_138].Freq++; + } + count = 0; prevlen = curlen; + if (nextlen == 0) { + max_count = 138, min_count = 3; + } else if (curlen == nextlen) { + max_count = 6, min_count = 3; + } else { + max_count = 7, min_count = 4; + } + } +} + +/* =========================================================================== + * Send a literal or distance tree in compressed form, using the codes in + * bl_tree. + */ +local void send_tree (s, tree, max_code) + deflate_state *s; + ct_data *tree; /* the tree to be scanned */ + int max_code; /* and its largest code of non zero frequency */ +{ + int n; /* iterates over all tree elements */ + int prevlen = -1; /* last emitted length */ + int curlen; /* length of current code */ + int nextlen = tree[0].Len; /* length of next code */ + int count = 0; /* repeat count of the current code */ + int max_count = 7; /* max repeat count */ + int min_count = 4; /* min repeat count */ + + /* tree[max_code+1].Len = -1; */ /* guard already set */ + if (nextlen == 0) max_count = 138, min_count = 3; + + for (n = 0; n <= max_code; n++) { + curlen = nextlen; nextlen = tree[n+1].Len; + if (++count < max_count && curlen == nextlen) { + continue; + } else if (count < min_count) { + do { send_code(s, curlen, s->bl_tree); } while (--count != 0); + + } else if (curlen != 0) { + if (curlen != prevlen) { + send_code(s, curlen, s->bl_tree); count--; + } + Assert(count >= 3 && count <= 6, " 3_6?"); + send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2); + + } else if (count <= 10) { + send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3); + + } else { + send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7); + } + count = 0; prevlen = curlen; + if (nextlen == 0) { + max_count = 138, min_count = 3; + } else if (curlen == nextlen) { + max_count = 6, min_count = 3; + } else { + max_count = 7, min_count = 4; + } + } +} + +/* =========================================================================== + * Construct the Huffman tree for the bit lengths and return the index in + * bl_order of the last bit length code to send. + */ +local int build_bl_tree(s) + deflate_state *s; +{ + int max_blindex; /* index of last bit length code of non zero freq */ + + /* Determine the bit length frequencies for literal and distance trees */ + scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code); + scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code); + + /* Build the bit length tree: */ + build_tree(s, (tree_desc *)(&(s->bl_desc))); + /* opt_len now includes the length of the tree representations, except + * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. + */ + + /* Determine the number of bit length codes to send. The pkzip format + * requires that at least 4 bit length codes be sent. (appnote.txt says + * 3 but the actual value used is 4.) + */ + for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) { + if (s->bl_tree[bl_order[max_blindex]].Len != 0) break; + } + /* Update opt_len to include the bit length tree and counts */ + s->opt_len += 3*(max_blindex+1) + 5+5+4; + Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", + s->opt_len, s->static_len)); + + return max_blindex; +} + +/* =========================================================================== + * Send the header for a block using dynamic Huffman trees: the counts, the + * lengths of the bit length codes, the literal tree and the distance tree. + * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4. + */ +local void send_all_trees(s, lcodes, dcodes, blcodes) + deflate_state *s; + int lcodes, dcodes, blcodes; /* number of codes for each tree */ +{ + int rank; /* index in bl_order */ + + Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes"); + Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES, + "too many codes"); + Tracev((stderr, "\nbl counts: ")); + send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */ + send_bits(s, dcodes-1, 5); + send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */ + for (rank = 0; rank < blcodes; rank++) { + Tracev((stderr, "\nbl code %2d ", bl_order[rank])); + send_bits(s, s->bl_tree[bl_order[rank]].Len, 3); + } + Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent)); + + send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */ + Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent)); + + send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */ + Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent)); +} + +/* =========================================================================== + * Send a stored block + */ +void _tr_stored_block(s, buf, stored_len, eof) + deflate_state *s; + charf *buf; /* input block */ + ulg stored_len; /* length of input block */ + int eof; /* true if this is the last block for a file */ +{ + send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */ +#ifdef ZLIB_DEBUG + s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; + s->compressed_len += (stored_len + 4) << 3; +#endif + copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ +} + +/* =========================================================================== + * Send one empty static block to give enough lookahead for inflate. + * This takes 10 bits, of which 7 may remain in the bit buffer. + * The current inflate code requires 9 bits of lookahead. If the + * last two codes for the previous block (real code plus EOB) were coded + * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode + * the last real code. In this case we send two empty static blocks instead + * of one. (There are no problems if the previous block is stored or fixed.) + * To simplify the code, we assume the worst case of last real code encoded + * on one bit only. + */ +void _tr_align(s) + deflate_state *s; +{ + send_bits(s, STATIC_TREES<<1, 3); + send_code(s, END_BLOCK, static_ltree); +#ifdef ZLIB_DEBUG + s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ +#endif + bi_flush(s); + /* Of the 10 bits for the empty block, we have already sent + * (10 - bi_valid) bits. The lookahead for the last real code (before + * the EOB of the previous block) was thus at least one plus the length + * of the EOB plus what we have just sent of the empty static block. + */ + if (1 + s->last_eob_len + 10 - s->bi_valid < 9) { + send_bits(s, STATIC_TREES<<1, 3); + send_code(s, END_BLOCK, static_ltree); +#ifdef ZLIB_DEBUG + s->compressed_len += 10L; +#endif + bi_flush(s); + } + s->last_eob_len = 7; +} + +/* =========================================================================== + * Determine the best encoding for the current block: dynamic trees, static + * trees or store, and output the encoded block to the zip file. + */ +void _tr_flush_block(s, buf, stored_len, eof) + deflate_state *s; + charf *buf; /* input block, or NULL if too old */ + ulg stored_len; /* length of input block */ + int eof; /* true if this is the last block for a file */ +{ + ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ + int max_blindex = 0; /* index of last bit length code of non zero freq */ + + /* Build the Huffman trees unless a stored block is forced */ + if (s->level > 0) { + + /* Check if the file is binary or text */ + if (stored_len > 0 && s->strm->data_type == Z_UNKNOWN) + set_data_type(s); + + /* Construct the literal and distance trees */ + build_tree(s, (tree_desc *)(&(s->l_desc))); + Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len, + s->static_len)); + + build_tree(s, (tree_desc *)(&(s->d_desc))); + Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, + s->static_len)); + /* At this point, opt_len and static_len are the total bit lengths of + * the compressed block data, excluding the tree representations. + */ + + /* Build the bit length tree for the above two trees, and get the index + * in bl_order of the last bit length code to send. + */ + max_blindex = build_bl_tree(s); + + /* Determine the best encoding. Compute the block lengths in bytes. */ + opt_lenb = (s->opt_len+3+7)>>3; + static_lenb = (s->static_len+3+7)>>3; + + Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ", + opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len, + s->last_lit)); + + if (static_lenb <= opt_lenb) opt_lenb = static_lenb; + + } else { + Assert(buf != (char*)0, "lost buf"); + opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ + } + +#ifdef FORCE_STORED + if (buf != (char*)0) { /* force stored block */ +#else + if (stored_len+4 <= opt_lenb && buf != (char*)0) { + /* 4: two words for the lengths */ +#endif + /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. + * Otherwise we can't have processed more than WSIZE input bytes since + * the last block flush, because compression would have been + * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to + * transform a block into a stored block. + */ + _tr_stored_block(s, buf, stored_len, eof); + +#ifdef FORCE_STATIC + } else if (static_lenb >= 0) { /* force static trees */ +#else + } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) { +#endif + send_bits(s, (STATIC_TREES<<1)+eof, 3); + compress_block(s, (ct_data *)__UNCONST(static_ltree), + (ct_data *)__UNCONST(static_dtree)); +#ifdef ZLIB_DEBUG + s->compressed_len += 3 + s->static_len; +#endif + } else { + send_bits(s, (DYN_TREES<<1)+eof, 3); + send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, + max_blindex+1); + compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree); +#ifdef ZLIB_DEBUG + s->compressed_len += 3 + s->opt_len; +#endif + } + Assert (s->compressed_len == s->bits_sent, "bad compressed size"); + /* The above check is made mod 2^32, for files larger than 512 MB + * and uLong implemented on 32 bits. + */ + init_block(s); + + if (eof) { + bi_windup(s); +#ifdef ZLIB_DEBUG + s->compressed_len += 7; /* align on byte boundary */ +#endif + } + Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, + s->compressed_len-7*eof)); +} + +/* =========================================================================== + * Save the match info and tally the frequency counts. Return true if + * the current block must be flushed. + */ +int _tr_tally (s, dist, lc) + deflate_state *s; + unsigned dist; /* distance of matched string */ + unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */ +{ + s->d_buf[s->last_lit] = (ush)dist; + s->l_buf[s->last_lit++] = (uch)lc; + if (dist == 0) { + /* lc is the unmatched char */ + s->dyn_ltree[lc].Freq++; + } else { + s->matches++; + /* Here, lc is the match length - MIN_MATCH */ + dist--; /* dist = match distance - 1 */ + Assert((ush)dist < (ush)MAX_DIST(s) && + (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && + (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); + + s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++; + s->dyn_dtree[d_code(dist)].Freq++; + } + +#ifdef TRUNCATE_BLOCK + /* Try to guess if it is profitable to stop the current block here */ + if ((s->last_lit & 0x1fff) == 0 && s->level > 2) { + /* Compute an upper bound for the compressed length */ + ulg out_length = (ulg)s->last_lit*8L; + ulg in_length = (ulg)((long)s->strstart - s->block_start); + int dcode; + for (dcode = 0; dcode < D_CODES; dcode++) { + out_length += (ulg)s->dyn_dtree[dcode].Freq * + (5L+extra_dbits[dcode]); + } + out_length >>= 3; + Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ", + s->last_lit, in_length, out_length, + 100L - out_length*100L/in_length)); + if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; + } +#endif + return (s->last_lit == s->lit_bufsize-1); + /* We avoid equality with lit_bufsize because of wraparound at 64K + * on 16 bit machines and because stored blocks are restricted to + * 64K-1 bytes. + */ +} + +/* =========================================================================== + * Send the block data compressed using the given Huffman trees + */ +local void compress_block(s, ltree, dtree) + deflate_state *s; + ct_data *ltree; /* literal tree */ + ct_data *dtree; /* distance tree */ +{ + unsigned dist; /* distance of matched string */ + int lc; /* match length or unmatched char (if dist == 0) */ + unsigned lx = 0; /* running index in l_buf */ + unsigned code; /* the code to send */ + int extra; /* number of extra bits to send */ + + if (s->last_lit != 0) do { + dist = s->d_buf[lx]; + lc = s->l_buf[lx++]; + if (dist == 0) { + send_code(s, lc, ltree); /* send a literal byte */ + Tracecv(isgraph(lc), (stderr," '%c' ", lc)); + } else { + /* Here, lc is the match length - MIN_MATCH */ + code = _length_code[lc]; + send_code(s, code+LITERALS+1, ltree); /* send the length code */ + extra = extra_lbits[code]; + if (extra != 0) { + lc -= base_length[code]; + send_bits(s, lc, extra); /* send the extra length bits */ + } + dist--; /* dist is now the match distance - 1 */ + code = d_code(dist); + Assert (code < D_CODES, "bad d_code"); + + send_code(s, code, dtree); /* send the distance code */ + extra = extra_dbits[code]; + if (extra != 0) { + dist -= base_dist[code]; + send_bits(s, dist, extra); /* send the extra distance bits */ + } + } /* literal or match pair ? */ + + /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */ + Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx, + "pendingBuf overflow"); + + } while (lx < s->last_lit); + + send_code(s, END_BLOCK, ltree); + s->last_eob_len = ltree[END_BLOCK].Len; +} + +/* =========================================================================== + * Set the data type to BINARY or TEXT, using a crude approximation: + * set it to Z_TEXT if all symbols are either printable characters (33 to 255) + * or white spaces (9 to 13, or 32); or set it to Z_BINARY otherwise. + * IN assertion: the fields Freq of dyn_ltree are set. + */ +local void set_data_type(s) + deflate_state *s; +{ + int n; + + for (n = 0; n < 9; n++) + if (s->dyn_ltree[n].Freq != 0) + break; + if (n == 9) + for (n = 14; n < 32; n++) + if (s->dyn_ltree[n].Freq != 0) + break; + s->strm->data_type = (n == 32) ? Z_TEXT : Z_BINARY; +} + +/* =========================================================================== + * Reverse the first len bits of a code, using straightforward code (a faster + * method would use a table) + * IN assertion: 1 <= len <= 15 + */ +local unsigned bi_reverse(code, len) + unsigned code; /* the value to invert */ + int len; /* its bit length */ +{ + register unsigned res = 0; + do { + res |= code & 1; + code >>= 1, res <<= 1; + } while (--len > 0); + return res >> 1; +} + +/* =========================================================================== + * Flush the bit buffer, keeping at most 7 bits in it. + */ +local void bi_flush(s) + deflate_state *s; +{ + if (s->bi_valid == 16) { + put_short(s, s->bi_buf); + s->bi_buf = 0; + s->bi_valid = 0; + } else if (s->bi_valid >= 8) { + put_byte(s, (Byte)s->bi_buf); + s->bi_buf >>= 8; + s->bi_valid -= 8; + } +} + +/* =========================================================================== + * Flush the bit buffer and align the output on a byte boundary + */ +local void bi_windup(s) + deflate_state *s; +{ + if (s->bi_valid > 8) { + put_short(s, s->bi_buf); + } else if (s->bi_valid > 0) { + put_byte(s, (Byte)s->bi_buf); + } + s->bi_buf = 0; + s->bi_valid = 0; +#ifdef ZLIB_DEBUG + s->bits_sent = (s->bits_sent+7) & ~7; +#endif +} + +/* =========================================================================== + * Copy a stored block, storing first the length and its + * one's complement if requested. + */ +local void copy_block(s, buf, len, header) + deflate_state *s; + charf *buf; /* the input data */ + unsigned len; /* its length */ + int header; /* true if block header must be written */ +{ + bi_windup(s); /* align on byte boundary */ + s->last_eob_len = 8; /* enough lookahead for inflate */ + + if (header) { + put_short(s, (ush)len); + put_short(s, (ush)~len); +#ifdef ZLIB_DEBUG + s->bits_sent += 2*16; +#endif + } +#ifdef ZLIB_DEBUG + s->bits_sent += (ulg)len<<3; +#endif + while (len--) { + put_byte(s, *buf++); + } +} diff --git a/common/dist/zlib/trees.h b/common/dist/zlib/trees.h new file mode 100644 index 000000000..02ecce176 --- /dev/null +++ b/common/dist/zlib/trees.h @@ -0,0 +1,130 @@ +/* $NetBSD: trees.h,v 1.1.1.1 2006/01/14 20:10:33 christos Exp $ */ + +/* header created automatically with -DGEN_TREES_H */ + +local const ct_data static_ltree[L_CODES+2] = { +{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}}, +{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}}, +{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}}, +{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}}, +{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}}, +{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}}, +{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}}, +{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}}, +{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}}, +{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}}, +{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}}, +{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}}, +{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}}, +{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}}, +{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}}, +{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}}, +{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}}, +{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}}, +{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}}, +{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}}, +{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}}, +{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}}, +{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}}, +{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}}, +{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}}, +{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}}, +{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}}, +{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}}, +{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}}, +{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}}, +{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}}, +{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}}, +{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}}, +{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}}, +{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}}, +{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}}, +{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}}, +{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}}, +{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}}, +{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}}, +{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}}, +{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}}, +{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}}, +{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}}, +{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}}, +{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}}, +{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}}, +{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}}, +{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}}, +{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}}, +{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}}, +{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}}, +{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}}, +{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}}, +{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}}, +{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}}, +{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}}, +{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}} +}; + +local const ct_data static_dtree[D_CODES] = { +{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}}, +{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}}, +{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}}, +{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}}, +{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}}, +{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}} +}; + +const uch _dist_code[DIST_CODE_LEN] = { + 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8, + 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10, +10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, +11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, +12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13, +13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, +13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17, +18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22, +23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29 +}; + +const uch _length_code[MAX_MATCH-MIN_MATCH+1]= { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12, +13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16, +17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19, +19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, +21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22, +22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, +23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, +25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28 +}; + +local const int base_length[LENGTH_CODES] = { +0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, +64, 80, 96, 112, 128, 160, 192, 224, 0 +}; + +local const int base_dist[D_CODES] = { + 0, 1, 2, 3, 4, 6, 8, 12, 16, 24, + 32, 48, 64, 96, 128, 192, 256, 384, 512, 768, + 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576 +}; + diff --git a/common/dist/zlib/uncompr.c b/common/dist/zlib/uncompr.c new file mode 100644 index 000000000..cab76ea1a --- /dev/null +++ b/common/dist/zlib/uncompr.c @@ -0,0 +1,63 @@ +/* $NetBSD: uncompr.c,v 1.2 2006/01/27 00:45:27 christos Exp $ */ + +/* uncompr.c -- decompress a memory buffer + * Copyright (C) 1995-2003 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) Id */ + +#define ZLIB_INTERNAL +#include "zlib.h" + +/* =========================================================================== + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +*/ +int ZEXPORT uncompress (dest, destLen, source, sourceLen) + Bytef *dest; + uLongf *destLen; + const Bytef *source; + uLong sourceLen; +{ + z_stream stream; + int err; + + stream.next_in = (Bytef*)__UNCONST(source); + stream.avail_in = (uInt)sourceLen; + /* Check for source > 64K on 16-bit machine: */ + if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; + + stream.next_out = dest; + stream.avail_out = (uInt)*destLen; + if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; + + stream.zalloc = (alloc_func)0; + stream.zfree = (free_func)0; + + err = inflateInit(&stream); + if (err != Z_OK) return err; + + err = inflate(&stream, Z_FINISH); + if (err != Z_STREAM_END) { + inflateEnd(&stream); + if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0)) + return Z_DATA_ERROR; + return err; + } + *destLen = stream.total_out; + + err = inflateEnd(&stream); + return err; +} diff --git a/common/dist/zlib/win32/DLL_FAQ.txt b/common/dist/zlib/win32/DLL_FAQ.txt new file mode 100644 index 000000000..fb18e0711 --- /dev/null +++ b/common/dist/zlib/win32/DLL_FAQ.txt @@ -0,0 +1,397 @@ + + Frequently Asked Questions about ZLIB1.DLL + + +This document describes the design, the rationale, and the usage +of the official DLL build of zlib, named ZLIB1.DLL. If you have +general questions about zlib, you should see the file "FAQ" found +in the zlib distribution, or at the following location: + http://www.gzip.org/zlib/zlib_faq.html + + + 1. What is ZLIB1.DLL, and how can I get it? + + - ZLIB1.DLL is the official build of zlib as a DLL. + (Please remark the character '1' in the name.) + + Pointers to a precompiled ZLIB1.DLL can be found in the zlib + web site at: + http://www.zlib.org/ + + Applications that link to ZLIB1.DLL can rely on the following + specification: + + * The exported symbols are exclusively defined in the source + files "zlib.h" and "zlib.def", found in an official zlib + source distribution. + * The symbols are exported by name, not by ordinal. + * The exported names are undecorated. + * The calling convention of functions is "C" (CDECL). + * The ZLIB1.DLL binary is linked to MSVCRT.DLL. + + The archive in which ZLIB1.DLL is bundled contains compiled + test programs that must run with a valid build of ZLIB1.DLL. + It is recommended to download the prebuilt DLL from the zlib + web site, instead of building it yourself, to avoid potential + incompatibilities that could be introduced by your compiler + and build settings. If you do build the DLL yourself, please + make sure that it complies with all the above requirements, + and it runs with the precompiled test programs, bundled with + the original ZLIB1.DLL distribution. + + If, for any reason, you need to build an incompatible DLL, + please use a different file name. + + + 2. Why did you change the name of the DLL to ZLIB1.DLL? + What happened to the old ZLIB.DLL? + + - The old ZLIB.DLL, built from zlib-1.1.4 or earlier, required + compilation settings that were incompatible to those used by + a static build. The DLL settings were supposed to be enabled + by defining the macro ZLIB_DLL, before including "zlib.h". + Incorrect handling of this macro was silently accepted at + build time, resulting in two major problems: + + * ZLIB_DLL was missing from the old makefile. When building + the DLL, not all people added it to the build options. In + consequence, incompatible incarnations of ZLIB.DLL started + to circulate around the net. + + * When switching from using the static library to using the + DLL, applications had to define the ZLIB_DLL macro and + to recompile all the sources that contained calls to zlib + functions. Failure to do so resulted in creating binaries + that were unable to run with the official ZLIB.DLL build. + + The only possible solution that we could foresee was to make + a binary-incompatible change in the DLL interface, in order to + remove the dependency on the ZLIB_DLL macro, and to release + the new DLL under a different name. + + We chose the name ZLIB1.DLL, where '1' indicates the major + zlib version number. We hope that we will not have to break + the binary compatibility again, at least not as long as the + zlib-1.x series will last. + + There is still a ZLIB_DLL macro, that can trigger a more + efficient build and use of the DLL, but compatibility no + longer dependents on it. + + + 3. Can I build ZLIB.DLL from the new zlib sources, and replace + an old ZLIB.DLL, that was built from zlib-1.1.4 or earlier? + + - In principle, you can do it by assigning calling convention + keywords to the macros ZEXPORT and ZEXPORTVA. In practice, + it depends on what you mean by "an old ZLIB.DLL", because the + old DLL exists in several mutually-incompatible versions. + You have to find out first what kind of calling convention is + being used in your particular ZLIB.DLL build, and to use the + same one in the new build. If you don't know what this is all + about, you might be better off if you would just leave the old + DLL intact. + + + 4. Can I compile my application using the new zlib interface, and + link it to an old ZLIB.DLL, that was built from zlib-1.1.4 or + earlier? + + - The official answer is "no"; the real answer depends again on + what kind of ZLIB.DLL you have. Even if you are lucky, this + course of action is unreliable. + + If you rebuild your application and you intend to use a newer + version of zlib (post- 1.1.4), it is strongly recommended to + link it to the new ZLIB1.DLL. + + + 5. Why are the zlib symbols exported by name, and not by ordinal? + + - Although exporting symbols by ordinal is a little faster, it + is risky. Any single glitch in the maintenance or use of the + DEF file that contains the ordinals can result in incompatible + builds and frustrating crashes. Simply put, the benefits of + exporting symbols by ordinal do not justify the risks. + + Technically, it should be possible to maintain ordinals in + the DEF file, and still export the symbols by name. Ordinals + exist in every DLL, and even if the dynamic linking performed + at the DLL startup is searching for names, ordinals serve as + hints, for a faster name lookup. However, if the DEF file + contains ordinals, the Microsoft linker automatically builds + an implib that will cause the executables linked to it to use + those ordinals, and not the names. It is interesting to + notice that the GNU linker for Win32 does not suffer from this + problem. + + It is possible to avoid the DEF file if the exported symbols + are accompanied by a "__declspec(dllexport)" attribute in the + source files. You can do this in zlib by predefining the + ZLIB_DLL macro. + + + 6. I see that the ZLIB1.DLL functions use the "C" (CDECL) calling + convention. Why not use the STDCALL convention? + STDCALL is the standard convention in Win32, and I need it in + my Visual Basic project! + + (For readability, we use CDECL to refer to the convention + triggered by the "__cdecl" keyword, STDCALL to refer to + the convention triggered by "__stdcall", and FASTCALL to + refer to the convention triggered by "__fastcall".) + + - Most of the native Windows API functions (without varargs) use + indeed the WINAPI convention (which translates to STDCALL in + Win32), but the standard C functions use CDECL. If a user + application is intrinsically tied to the Windows API (e.g. + it calls native Windows API functions such as CreateFile()), + sometimes it makes sense to decorate its own functions with + WINAPI. But if ANSI C or POSIX portability is a goal (e.g. + it calls standard C functions such as fopen()), it is not a + sound decision to request the inclusion of , or to + use non-ANSI constructs, for the sole purpose to make the user + functions STDCALL-able. + + The functionality offered by zlib is not in the category of + "Windows functionality", but is more like "C functionality". + + Technically, STDCALL is not bad; in fact, it is slightly + faster than CDECL, and it works with variable-argument + functions, just like CDECL. It is unfortunate that, in spite + of using STDCALL in the Windows API, it is not the default + convention used by the C compilers that run under Windows. + The roots of the problem reside deep inside the unsafety of + the K&R-style function prototypes, where the argument types + are not specified; but that is another story for another day. + + The remaining fact is that CDECL is the default convention. + Even if an explicit convention is hard-coded into the function + prototypes inside C headers, problems may appear. The + necessity to expose the convention in users' callbacks is one + of these problems. + + The calling convention issues are also important when using + zlib in other programming languages. Some of them, like Ada + (GNAT) and Fortran (GNU G77), have C bindings implemented + initially on Unix, and relying on the C calling convention. + On the other hand, the pre- .NET versions of Microsoft Visual + Basic require STDCALL, while Borland Delphi prefers, although + it does not require, FASTCALL. + + In fairness to all possible uses of zlib outside the C + programming language, we choose the default "C" convention. + Anyone interested in different bindings or conventions is + encouraged to maintain specialized projects. The "contrib/" + directory from the zlib distribution already holds a couple + of foreign bindings, such as Ada, C++, and Delphi. + + + 7. I need a DLL for my Visual Basic project. What can I do? + + - Define the ZLIB_WINAPI macro before including "zlib.h", when + building both the DLL and the user application (except that + you don't need to define anything when using the DLL in Visual + Basic). The ZLIB_WINAPI macro will switch on the WINAPI + (STDCALL) convention. The name of this DLL must be different + than the official ZLIB1.DLL. + + Gilles Vollant has contributed a build named ZLIBWAPI.DLL, + with the ZLIB_WINAPI macro turned on, and with the minizip + functionality built in. For more information, please read + the notes inside "contrib/vstudio/readme.txt", found in the + zlib distribution. + + + 8. I need to use zlib in my Microsoft .NET project. What can I + do? + + - Henrik Ravn has contributed a .NET wrapper around zlib. Look + into contrib/dotzlib/, inside the zlib distribution. + + + 9. If my application uses ZLIB1.DLL, should I link it to + MSVCRT.DLL? Why? + + - It is not required, but it is recommended to link your + application to MSVCRT.DLL, if it uses ZLIB1.DLL. + + The executables (.EXE, .DLL, etc.) that are involved in the + same process and are using the C run-time library (i.e. they + are calling standard C functions), must link to the same + library. There are several libraries in the Win32 system: + CRTDLL.DLL, MSVCRT.DLL, the static C libraries, etc. + Since ZLIB1.DLL is linked to MSVCRT.DLL, the executables that + depend on it should also be linked to MSVCRT.DLL. + + +10. Why are you saying that ZLIB1.DLL and my application should + be linked to the same C run-time (CRT) library? I linked my + application and my DLLs to different C libraries (e.g. my + application to a static library, and my DLLs to MSVCRT.DLL), + and everything works fine. + + - If a user library invokes only pure Win32 API (accessible via + and the related headers), its DLL build will work + in any context. But if this library invokes standard C API, + things get more complicated. + + There is a single Win32 library in a Win32 system. Every + function in this library resides in a single DLL module, that + is safe to call from anywhere. On the other hand, there are + multiple versions of the C library, and each of them has its + own separate internal state. Standalone executables and user + DLLs that call standard C functions must link to a C run-time + (CRT) library, be it static or shared (DLL). Intermixing + occurs when an executable (not necessarily standalone) and a + DLL are linked to different CRTs, and both are running in the + same process. + + Intermixing multiple CRTs is possible, as long as their + internal states are kept intact. The Microsoft Knowledge Base + articles KB94248 "HOWTO: Use the C Run-Time" and KB140584 + "HOWTO: Link with the Correct C Run-Time (CRT) Library" + mention the potential problems raised by intermixing. + + If intermixing works for you, it's because your application + and DLLs are avoiding the corruption of each of the CRTs' + internal states, maybe by careful design, or maybe by fortune. + + Also note that linking ZLIB1.DLL to non-Microsoft CRTs, such + as those provided by Borland, raises similar problems. + + +11. Why are you linking ZLIB1.DLL to MSVCRT.DLL? + + - MSVCRT.DLL exists on every Windows 95 with a new service pack + installed, or with Microsoft Internet Explorer 4 or later, and + on all other Windows 4.x or later (Windows 98, Windows NT 4, + or later). It is freely distributable; if not present in the + system, it can be downloaded from Microsoft or from other + software provider for free. + + The fact that MSVCRT.DLL does not exist on a virgin Windows 95 + is not so problematic. Windows 95 is scarcely found nowadays, + Microsoft ended its support a long time ago, and many recent + applications from various vendors, including Microsoft, do not + even run on it. Furthermore, no serious user should run + Windows 95 without a proper update installed. + + +12. Why are you not linking ZLIB1.DLL to + <> ? + + - We considered and abandoned the following alternatives: + + * Linking ZLIB1.DLL to a static C library (LIBC.LIB, or + LIBCMT.LIB) is not a good option. People are using the DLL + mainly to save disk space. If you are linking your program + to a static C library, you may as well consider linking zlib + in statically, too. + + * Linking ZLIB1.DLL to CRTDLL.DLL looks appealing, because + CRTDLL.DLL is present on every Win32 installation. + Unfortunately, it has a series of problems: it does not + work properly with Microsoft's C++ libraries, it does not + provide support for 64-bit file offsets, (and so on...), + and Microsoft discontinued its support a long time ago. + + * Linking ZLIB1.DLL to MSVCR70.DLL or MSVCR71.DLL, supplied + with the Microsoft .NET platform, and Visual C++ 7.0/7.1, + raises problems related to the status of ZLIB1.DLL as a + system component. According to the Microsoft Knowledge Base + article KB326922 "INFO: Redistribution of the Shared C + Runtime Component in Visual C++ .NET", MSVCR70.DLL and + MSVCR71.DLL are not supposed to function as system DLLs, + because they may clash with MSVCRT.DLL. Instead, the + application's installer is supposed to put these DLLs + (if needed) in the application's private directory. + If ZLIB1.DLL depends on a non-system runtime, it cannot + function as a redistributable system component. + + * Linking ZLIB1.DLL to non-Microsoft runtimes, such as + Borland's, or Cygwin's, raises problems related to the + reliable presence of these runtimes on Win32 systems. + It's easier to let the DLL build of zlib up to the people + who distribute these runtimes, and who may proceed as + explained in the answer to Question 14. + + +13. If ZLIB1.DLL cannot be linked to MSVCR70.DLL or MSVCR71.DLL, + how can I build/use ZLIB1.DLL in Microsoft Visual C++ 7.0 + (Visual Studio .NET) or newer? + + - Due to the problems explained in the Microsoft Knowledge Base + article KB326922 (see the previous answer), the C runtime that + comes with the VC7 environment is no longer considered a + system component. That is, it should not be assumed that this + runtime exists, or may be installed in a system directory. + Since ZLIB1.DLL is supposed to be a system component, it may + not depend on a non-system component. + + In order to link ZLIB1.DLL and your application to MSVCRT.DLL + in VC7, you need the library of Visual C++ 6.0 or older. If + you don't have this library at hand, it's probably best not to + use ZLIB1.DLL. + + We are hoping that, in the future, Microsoft will provide a + way to build applications linked to a proper system runtime, + from the Visual C++ environment. Until then, you have a + couple of alternatives, such as linking zlib in statically. + If your application requires dynamic linking, you may proceed + as explained in the answer to Question 14. + + +14. I need to link my own DLL build to a CRT different than + MSVCRT.DLL. What can I do? + + - Feel free to rebuild the DLL from the zlib sources, and link + it the way you want. You should, however, clearly state that + your build is unofficial. You should give it a different file + name, and/or install it in a private directory that can be + accessed by your application only, and is not visible to the + others (e.g. it's not in the SYSTEM or the SYSTEM32 directory, + and it's not in the PATH). Otherwise, your build may clash + with applications that link to the official build. + + For example, in Cygwin, zlib is linked to the Cygwin runtime + CYGWIN1.DLL, and it is distributed under the name CYGZ.DLL. + + +15. May I include additional pieces of code that I find useful, + link them in ZLIB1.DLL, and export them? + + - No. A legitimate build of ZLIB1.DLL must not include code + that does not originate from the official zlib source code. + But you can make your own private DLL build, under a different + file name, as suggested in the previous answer. + + For example, zlib is a part of the VCL library, distributed + with Borland Delphi and C++ Builder. The DLL build of VCL + is a redistributable file, named VCLxx.DLL. + + +16. May I remove some functionality out of ZLIB1.DLL, by enabling + macros like NO_GZCOMPRESS or NO_GZIP at compile time? + + - No. A legitimate build of ZLIB1.DLL must provide the complete + zlib functionality, as implemented in the official zlib source + code. But you can make your own private DLL build, under a + different file name, as suggested in the previous answer. + + +17. I made my own ZLIB1.DLL build. Can I test it for compliance? + + - We prefer that you download the official DLL from the zlib + web site. If you need something peculiar from this DLL, you + can send your suggestion to the zlib mailing list. + + However, in case you do rebuild the DLL yourself, you can run + it with the test programs found in the DLL distribution. + Running these test programs is not a guarantee of compliance, + but a failure can imply a detected problem. + +** + +This document is written and maintained by +Cosmin Truta diff --git a/common/dist/zlib/win32/Makefile.bor b/common/dist/zlib/win32/Makefile.bor new file mode 100644 index 000000000..b802519ca --- /dev/null +++ b/common/dist/zlib/win32/Makefile.bor @@ -0,0 +1,107 @@ +# Makefile for zlib +# Borland C++ for Win32 +# +# Updated for zlib 1.2.x by Cosmin Truta, 11-Mar-2003 +# Last updated: 28-Aug-2003 +# +# Usage: +# make -f win32/Makefile.bor +# make -f win32/Makefile.bor LOCAL_ZLIB=-DASMV OBJA=match.obj OBJPA=+match.obj + +# ------------ Borland C++ ------------ + +# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7) +# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or +# added to the declaration of LOC here: +LOC = $(LOCAL_ZLIB) + +CC = bcc32 +AS = bcc32 +LD = bcc32 +AR = tlib +CFLAGS = -a -d -k- -O2 $(LOC) +ASFLAGS = $(LOC) +LDFLAGS = $(LOC) + + +# variables +ZLIB_LIB = zlib.lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj +OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +#OBJA = +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj +OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj +#OBJPA= + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $< + +.asm.obj: + $(AS) -c $(ASFLAGS) $< + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzio.obj: gzio.c zutil.h zlib.h zconf.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: example.c zlib.h zconf.h + +minigzip.obj: minigzip.c zlib.h zconf.h + + +# For the sake of the old Borland make, +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) $(OBJA) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + $(AR) $(ZLIB_LIB) $(OBJPA) + + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + + +# cleanup +clean: + -del *.obj + -del *.lib + -del *.exe + -del *.tds + -del zlib.bak + -del foo.gz diff --git a/common/dist/zlib/win32/Makefile.emx b/common/dist/zlib/win32/Makefile.emx new file mode 100644 index 000000000..7b08424ce --- /dev/null +++ b/common/dist/zlib/win32/Makefile.emx @@ -0,0 +1,69 @@ +# Makefile for zlib. Modified for emx/rsxnt by Chr. Spieler, 6/16/98. +# Copyright (C) 1995-1998 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type: +# +# make -fmakefile.emx; make test -fmakefile.emx +# + +CC=gcc -Zwin32 + +#CFLAGS=-MMD -O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-MMD -g -DDEBUG +CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ + -Wstrict-prototypes -Wmissing-prototypes + +# If cp.exe is available, replace "copy /Y" with "cp -fp" . +CP=copy /Y +# If gnu install.exe is available, replace $(CP) with ginstall. +INSTALL=$(CP) +# The default value of RM is "rm -f." If "rm.exe" is found, comment out: +RM=del +LDLIBS=-L. -lzlib +LD=$(CC) -s -o +LDSHARED=$(CC) + +INCL=zlib.h zconf.h +LIBS=zlib.a + +AR=ar rcs + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \ + zutil.o inflate.o infback.o inftrees.o inffast.o + +TEST_OBJS = example.o minigzip.o + +all: example.exe minigzip.exe + +test: all + ./example + echo hello world | .\minigzip | .\minigzip -d + +%.o : %.c + $(CC) $(CFLAGS) -c $< -o $@ + +zlib.a: $(OBJS) + $(AR) $@ $(OBJS) + +%.exe : %.o $(LIBS) + $(LD) $@ $< $(LDLIBS) + + +.PHONY : clean + +clean: + $(RM) *.d + $(RM) *.o + $(RM) *.exe + $(RM) zlib.a + $(RM) foo.gz + +DEPS := $(wildcard *.d) +ifneq ($(DEPS),) +include $(DEPS) +endif diff --git a/common/dist/zlib/win32/Makefile.gcc b/common/dist/zlib/win32/Makefile.gcc new file mode 100644 index 000000000..62a843015 --- /dev/null +++ b/common/dist/zlib/win32/Makefile.gcc @@ -0,0 +1,141 @@ +# Makefile for zlib, derived from Makefile.dj2. +# Modified for mingw32 by C. Spieler, 6/16/98. +# Updated for zlib 1.2.x by Christian Spieler and Cosmin Truta, Mar-2003. +# Last updated: 1-Aug-2003. +# Tested under Cygwin and MinGW. + +# Copyright (C) 1995-2003 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type: +# +# make -fmakefile.gcc; make test testdll -fmakefile.gcc +# +# To use the asm code, type: +# cp contrib/asm?86/match.S ./match.S +# make LOC=-DASMV OBJA=match.o -fmakefile.gcc +# +# To install libz.a, zconf.h and zlib.h in the system directories, type: +# +# make install -fmakefile.gcc + +# Note: +# If the platform is *not* MinGW (e.g. it is Cygwin or UWIN), +# the DLL name should be changed from "zlib1.dll". + +STATICLIB = libz.a +SHAREDLIB = zlib1.dll +IMPLIB = libzdll.a + +#LOC = -DASMV +#LOC = -DDEBUG -g + +CC = gcc +CFLAGS = $(LOC) -O3 -Wall + +AS = $(CC) +ASFLAGS = $(LOC) -Wall + +LD = $(CC) +LDFLAGS = $(LOC) -s + +AR = ar +ARFLAGS = rcs + +RC = windres +RCFLAGS = --define GCC_WINDRES + +CP = cp -fp +# If GNU install is available, replace $(CP) with install. +INSTALL = $(CP) +RM = rm -f + +prefix = /usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o deflate.o gzio.o infback.o \ + inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o +OBJA = + +all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) example minigzip example_d minigzip_d + +test: example minigzip + ./example + echo hello world | ./minigzip | ./minigzip -d + +testdll: example_d minigzip_d + ./example_d + echo hello world | ./minigzip_d | ./minigzip_d -d + +.c.o: + $(CC) $(CFLAGS) -c -o $@ $< + +.S.o: + $(AS) $(ASFLAGS) -c -o $@ $< + +$(STATICLIB): $(OBJS) $(OBJA) + $(AR) $(ARFLAGS) $@ $(OBJS) $(OBJA) + +$(IMPLIB): $(SHAREDLIB) + +$(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlibrc.o + dllwrap --driver-name $(CC) --def win32/zlib.def \ + --implib $(IMPLIB) -o $@ $(OBJS) $(OBJA) zlibrc.o + strip $@ + +example: example.o $(STATICLIB) + $(LD) $(LDFLAGS) -o $@ example.o $(STATICLIB) + +minigzip: minigzip.o $(STATICLIB) + $(LD) $(LDFLAGS) -o $@ minigzip.o $(STATICLIB) + +example_d: example.o $(IMPLIB) + $(LD) $(LDFLAGS) -o $@ example.o $(IMPLIB) + +minigzip_d: minigzip.o $(IMPLIB) + $(LD) $(LDFLAGS) -o $@ minigzip.o $(IMPLIB) + +zlibrc.o: win32/zlib1.rc + $(RC) $(RCFLAGS) -o $@ win32/zlib1.rc + + +# INCLUDE_PATH and LIBRARY_PATH must be set. + +.PHONY: install uninstall clean + +install: zlib.h zconf.h $(LIB) + -@if not exist $(INCLUDE_PATH)/nul mkdir $(INCLUDE_PATH) + -@if not exist $(LIBRARY_PATH)/nul mkdir $(LIBRARY_PATH) + -$(INSTALL) zlib.h $(INCLUDE_PATH) + -$(INSTALL) zconf.h $(INCLUDE_PATH) + -$(INSTALL) $(STATICLIB) $(LIBRARY_PATH) + -$(INSTALL) $(IMPLIB) $(LIBRARY_PATH) + +uninstall: + -$(RM) $(INCLUDE_PATH)/zlib.h + -$(RM) $(INCLUDE_PATH)/zconf.h + -$(RM) $(LIBRARY_PATH)/$(STATICLIB) + -$(RM) $(LIBRARY_PATH)/$(IMPLIB) + +clean: + -$(RM) $(STATICLIB) + -$(RM) $(SHAREDLIB) + -$(RM) $(IMPLIB) + -$(RM) *.o + -$(RM) *.exe + -$(RM) foo.gz + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: crc32.h zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +example.o: zlib.h zconf.h +gzio.o: zutil.h zlib.h zconf.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +minigzip.o: zlib.h zconf.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/common/dist/zlib/win32/Makefile.msc b/common/dist/zlib/win32/Makefile.msc new file mode 100644 index 000000000..528ecaaf2 --- /dev/null +++ b/common/dist/zlib/win32/Makefile.msc @@ -0,0 +1,126 @@ +# Makefile for zlib -- Microsoft (Visual) C +# +# Authors: +# Cosmin Truta, 11-Mar-2003 +# Christian Spieler, 19-Mar-2003 +# +# Last updated: +# Cosmin Truta, 27-Aug-2003 +# +# Usage: +# nmake -f win32/Makefile.msc (standard build) +# nmake -f win32/Makefile.msc LOC=-DFOO (nonstandard build) +# nmake -f win32/Makefile.msc LOC=-DASMV OBJA=match.obj (use ASM code) + + +# optional build flags +LOC = + + +# variables +STATICLIB = zlib.lib +SHAREDLIB = zlib1.dll +IMPLIB = zdll.lib + +CC = cl +AS = ml +LD = link +AR = lib +RC = rc +CFLAGS = -nologo -MD -O2 $(LOC) +ASFLAGS = -coff +LDFLAGS = -nologo -release +ARFLAGS = -nologo +RCFLAGS = /dWIN32 /r + +OBJS = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj \ + inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJA = + + +# targets +all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) \ + example.exe minigzip.exe example_d.exe minigzip_d.exe + +$(STATICLIB): $(OBJS) $(OBJA) + $(AR) $(ARFLAGS) -out:$@ $(OBJS) $(OBJA) + +$(IMPLIB): $(SHAREDLIB) + +$(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlib1.res + $(LD) $(LDFLAGS) -def:win32/zlib.def -dll -implib:$(IMPLIB) \ + -out:$@ $(OBJS) $(OBJA) zlib1.res + +example.exe: example.obj $(STATICLIB) + $(LD) $(LDFLAGS) example.obj $(STATICLIB) + +minigzip.exe: minigzip.obj $(STATICLIB) + $(LD) $(LDFLAGS) minigzip.obj $(STATICLIB) + +example_d.exe: example.obj $(IMPLIB) + $(LD) $(LDFLAGS) -out:$@ example.obj $(IMPLIB) + +minigzip_d.exe: minigzip.obj $(IMPLIB) + $(LD) $(LDFLAGS) -out:$@ minigzip.obj $(IMPLIB) + +.c.obj: + $(CC) -c $(CFLAGS) $< + +.asm.obj: + $(AS) -c $(ASFLAGS) $< + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzio.obj: gzio.c zutil.h zlib.h zconf.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: example.c zlib.h zconf.h + +minigzip.obj: minigzip.c zlib.h zconf.h + +zlib1.res: win32/zlib1.rc + $(RC) $(RCFLAGS) /fo$@ win32/zlib1.rc + + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +testdll: example_d.exe minigzip_d.exe + example_d + echo hello world | minigzip_d | minigzip_d -d + + +# cleanup +clean: + -del $(STATICLIB) + -del $(SHAREDLIB) + -del $(IMPLIB) + -del *.obj + -del *.res + -del *.exp + -del *.exe + -del foo.gz diff --git a/common/dist/zlib/win32/VisualC.txt b/common/dist/zlib/win32/VisualC.txt new file mode 100644 index 000000000..579a5fc9e --- /dev/null +++ b/common/dist/zlib/win32/VisualC.txt @@ -0,0 +1,3 @@ + +To build zlib using the Microsoft Visual C++ environment, +use the appropriate project from the projects/ directory. diff --git a/common/dist/zlib/win32/zlib.def b/common/dist/zlib/win32/zlib.def new file mode 100644 index 000000000..a47cbc10c --- /dev/null +++ b/common/dist/zlib/win32/zlib.def @@ -0,0 +1,60 @@ +LIBRARY +; zlib data compression library + +EXPORTS +; basic functions + zlibVersion + deflate + deflateEnd + inflate + inflateEnd +; advanced functions + deflateSetDictionary + deflateCopy + deflateReset + deflateParams + deflateBound + deflatePrime + inflateSetDictionary + inflateSync + inflateCopy + inflateReset + inflateBack + inflateBackEnd + zlibCompileFlags +; utility functions + compress + compress2 + compressBound + uncompress + gzopen + gzdopen + gzsetparams + gzread + gzwrite + gzprintf + gzputs + gzgets + gzputc + gzgetc + gzungetc + gzflush + gzseek + gzrewind + gztell + gzeof + gzclose + gzerror + gzclearerr +; checksum functions + adler32 + crc32 +; various hacks, don't look :) + deflateInit_ + deflateInit2_ + inflateInit_ + inflateInit2_ + inflateBackInit_ + inflateSyncPoint + get_crc_table + zError diff --git a/common/dist/zlib/win32/zlib1.rc b/common/dist/zlib/win32/zlib1.rc new file mode 100644 index 000000000..99025c974 --- /dev/null +++ b/common/dist/zlib/win32/zlib1.rc @@ -0,0 +1,39 @@ +#include + +#ifdef GCC_WINDRES +VS_VERSION_INFO VERSIONINFO +#else +VS_VERSION_INFO VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE +#endif + FILEVERSION 1,2,2,0 + PRODUCTVERSION 1,2,2,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK +#ifdef _DEBUG + FILEFLAGS 1 +#else + FILEFLAGS 0 +#endif + FILEOS VOS_DOS_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + BEGIN + VALUE "FileDescription", "zlib data compression library\0" + VALUE "FileVersion", "1.2.3\0" + VALUE "InternalName", "zlib1.dll\0" + VALUE "LegalCopyright", "(C) 1995-2004 Jean-loup Gailly & Mark Adler\0" + VALUE "OriginalFilename", "zlib1.dll\0" + VALUE "ProductName", "zlib\0" + VALUE "ProductVersion", "1.2.3\0" + VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/common/dist/zlib/zconf.h b/common/dist/zlib/zconf.h new file mode 100644 index 000000000..c49b57c73 --- /dev/null +++ b/common/dist/zlib/zconf.h @@ -0,0 +1,340 @@ +/* $NetBSD: zconf.h,v 1.2 2006/01/14 20:27:34 christos Exp $ */ + +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) Id */ + +#ifndef ZCONF_H +#define ZCONF_H + +#include + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + */ +#ifdef Z_PREFIX +# define deflateInit_ z_deflateInit_ +# define deflate z_deflate +# define deflateEnd z_deflateEnd +# define inflateInit_ z_inflateInit_ +# define inflate z_inflate +# define inflateEnd z_inflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateSetDictionary z_deflateSetDictionary +# define deflateCopy z_deflateCopy +# define deflateReset z_deflateReset +# define deflateParams z_deflateParams +# define deflateBound z_deflateBound +# define deflatePrime z_deflatePrime +# define inflateInit2_ z_inflateInit2_ +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateCopy z_inflateCopy +# define inflateReset z_inflateReset +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# define uncompress z_uncompress +# define adler32 z_adler32 +# define crc32 z_crc32 +# define get_crc_table z_get_crc_table +# define zError z_zError + +# define alloc_func z_alloc_func +# define free_func z_free_func +# define in_func z_in_func +# define out_func z_out_func +# define Byte z_Byte +# define uInt z_uInt +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf +# define intf z_intf +# define uIntf z_uIntf +# define uLongf z_uLongf +# define voidpf z_voidpf +# define voidp z_voidp +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if defined(HAVE_UNISTD_H) || (defined(__NetBSD__) && (!defined(_KERNEL) && !defined(_STANDALONE))) +# include /* for off_t */ +# include /* for SEEK_* and off_t */ +# ifdef VMS +# include /* for off_t */ +# endif +# define z_off_t off_t +# define z_ptrdiff_t ptrdiff_t +#endif +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif +#ifndef z_off_t +# define z_off_t long +#endif +#ifndef z_ptrdiff_t +# define z_ptrdiff_t long +#endif + +#if defined(__OS400__) +# define NO_vsnprintf +#endif + +#if defined(__MVS__) +# define NO_vsnprintf +# ifdef FAR +# undef FAR +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) +# pragma map(deflateInit_,"DEIN") +# pragma map(deflateInit2_,"DEIN2") +# pragma map(deflateEnd,"DEEND") +# pragma map(deflateBound,"DEBND") +# pragma map(inflateInit_,"ININ") +# pragma map(inflateInit2_,"ININ2") +# pragma map(inflateEnd,"INEND") +# pragma map(inflateSync,"INSY") +# pragma map(inflateSetDictionary,"INSEDI") +# pragma map(compressBound,"CMBND") +# pragma map(inflate_table,"INTABL") +# pragma map(inflate_fast,"INFA") +# pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/common/dist/zlib/zconf.in.h b/common/dist/zlib/zconf.in.h new file mode 100644 index 000000000..c572d220d --- /dev/null +++ b/common/dist/zlib/zconf.in.h @@ -0,0 +1,334 @@ +/* $NetBSD: zconf.in.h,v 1.1.1.1 2006/01/14 20:10:33 christos Exp $ */ + +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) Id */ + +#ifndef ZCONF_H +#define ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + */ +#ifdef Z_PREFIX +# define deflateInit_ z_deflateInit_ +# define deflate z_deflate +# define deflateEnd z_deflateEnd +# define inflateInit_ z_inflateInit_ +# define inflate z_inflate +# define inflateEnd z_inflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateSetDictionary z_deflateSetDictionary +# define deflateCopy z_deflateCopy +# define deflateReset z_deflateReset +# define deflateParams z_deflateParams +# define deflateBound z_deflateBound +# define deflatePrime z_deflatePrime +# define inflateInit2_ z_inflateInit2_ +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateCopy z_inflateCopy +# define inflateReset z_inflateReset +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# define uncompress z_uncompress +# define adler32 z_adler32 +# define crc32 z_crc32 +# define get_crc_table z_get_crc_table +# define zError z_zError + +# define alloc_func z_alloc_func +# define free_func z_free_func +# define in_func z_in_func +# define out_func z_out_func +# define Byte z_Byte +# define uInt z_uInt +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf +# define intf z_intf +# define uIntf z_uIntf +# define uLongf z_uLongf +# define voidpf z_voidpf +# define voidp z_voidp +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if 0 /* HAVE_UNISTD_H -- this line is updated by ./configure */ +# include /* for off_t */ +# include /* for SEEK_* and off_t */ +# ifdef VMS +# include /* for off_t */ +# endif +# define z_off_t off_t +#endif +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif +#ifndef z_off_t +# define z_off_t long +#endif + +#if defined(__OS400__) +# define NO_vsnprintf +#endif + +#if defined(__MVS__) +# define NO_vsnprintf +# ifdef FAR +# undef FAR +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) +# pragma map(deflateInit_,"DEIN") +# pragma map(deflateInit2_,"DEIN2") +# pragma map(deflateEnd,"DEEND") +# pragma map(deflateBound,"DEBND") +# pragma map(inflateInit_,"ININ") +# pragma map(inflateInit2_,"ININ2") +# pragma map(inflateEnd,"INEND") +# pragma map(inflateSync,"INSY") +# pragma map(inflateSetDictionary,"INSEDI") +# pragma map(compressBound,"CMBND") +# pragma map(inflate_table,"INTABL") +# pragma map(inflate_fast,"INFA") +# pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/common/dist/zlib/zlib.3 b/common/dist/zlib/zlib.3 new file mode 100644 index 000000000..fefa45c65 --- /dev/null +++ b/common/dist/zlib/zlib.3 @@ -0,0 +1,161 @@ +.\" $NetBSD: zlib.3,v 1.1.1.1 2006/01/14 20:10:34 christos Exp $ +.\" +.TH ZLIB 3 "18 July 2005" +.SH NAME +zlib \- compression/decompression library +.SH SYNOPSIS +[see +.I zlib.h +for full description] +.SH DESCRIPTION +The +.I zlib +library is a general purpose data compression library. +The code is thread safe. +It provides in-memory compression and decompression functions, +including integrity checks of the uncompressed data. +This version of the library supports only one compression method (deflation) +but other algorithms will be added later +and will have the same stream interface. +.LP +Compression can be done in a single step if the buffers are large enough +(for example if an input file is mmap'ed), +or can be done by repeated calls of the compression function. +In the latter case, +the application must provide more input and/or consume the output +(providing more output space) before each call. +.LP +The library also supports reading and writing files in +.IR gzip (1) +(.gz) format +with an interface similar to that of stdio. +.LP +The library does not install any signal handler. +The decoder checks the consistency of the compressed data, +so the library should never crash even in case of corrupted input. +.LP +All functions of the compression library are documented in the file +.IR zlib.h . +The distribution source includes examples of use of the library +in the files +.I example.c +and +.IR minigzip.c . +.LP +Changes to this version are documented in the file +.I ChangeLog +that accompanies the source, +and are concerned primarily with bug fixes and portability enhancements. +.LP +A Java implementation of +.I zlib +is available in the Java Development Kit 1.1: +.IP +http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html +.LP +A Perl interface to +.IR zlib , +written by Paul Marquess (pmqs@cpan.org), +is available at CPAN (Comprehensive Perl Archive Network) sites, +including: +.IP +http://www.cpan.org/modules/by-module/Compress/ +.LP +A Python interface to +.IR zlib , +written by A.M. Kuchling (amk@magnet.com), +is available in Python 1.5 and later versions: +.IP +http://www.python.org/doc/lib/module-zlib.html +.LP +A +.I zlib +binding for +.IR tcl (1), +written by Andreas Kupries (a.kupries@westend.com), +is availlable at: +.IP +http://www.westend.com/~kupries/doc/trf/man/man.html +.LP +An experimental package to read and write files in .zip format, +written on top of +.I zlib +by Gilles Vollant (info@winimage.com), +is available at: +.IP +http://www.winimage.com/zLibDll/unzip.html +and also in the +.I contrib/minizip +directory of the main +.I zlib +web site. +.SH "SEE ALSO" +The +.I zlib +web site can be found at either of these locations: +.IP +http://www.zlib.org +.br +http://www.gzip.org/zlib/ +.LP +The data format used by the zlib library is described by RFC +(Request for Comments) 1950 to 1952 in the files: +.IP +http://www.ietf.org/rfc/rfc1950.txt (concerning zlib format) +.br +http://www.ietf.org/rfc/rfc1951.txt (concerning deflate format) +.br +http://www.ietf.org/rfc/rfc1952.txt (concerning gzip format) +.LP +These documents are also available in other formats from: +.IP +ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html +.LP +Mark Nelson (markn@ieee.org) wrote an article about +.I zlib +for the Jan. 1997 issue of Dr. Dobb's Journal; +a copy of the article is available at: +.IP +http://dogma.net/markn/articles/zlibtool/zlibtool.htm +.SH "REPORTING PROBLEMS" +Before reporting a problem, +please check the +.I zlib +web site to verify that you have the latest version of +.IR zlib ; +otherwise, +obtain the latest version and see if the problem still exists. +Please read the +.I zlib +FAQ at: +.IP +http://www.gzip.org/zlib/zlib_faq.html +.LP +before asking for help. +Send questions and/or comments to zlib@gzip.org, +or (for the Windows DLL version) to Gilles Vollant (info@winimage.com). +.SH AUTHORS +Version 1.2.3 +Copyright (C) 1995-2005 Jean-loup Gailly (jloup@gzip.org) +and Mark Adler (madler@alumni.caltech.edu). +.LP +This software is provided "as-is," +without any express or implied warranty. +In no event will the authors be held liable for any damages +arising from the use of this software. +See the distribution directory with respect to requirements +governing redistribution. +The deflate format used by +.I zlib +was defined by Phil Katz. +The deflate and +.I zlib +specifications were written by L. Peter Deutsch. +Thanks to all the people who reported problems and suggested various +improvements in +.IR zlib ; +who are too numerous to cite here. +.LP +UNIX manual page by R. P. C. Rodgers, +U.S. National Library of Medicine (rodgers@nlm.nih.gov). +.\" end of man page diff --git a/common/dist/zlib/zlib.h b/common/dist/zlib/zlib.h new file mode 100644 index 000000000..e2c8a87cf --- /dev/null +++ b/common/dist/zlib/zlib.h @@ -0,0 +1,1361 @@ +/* $NetBSD: zlib.h,v 1.3 2009/03/25 18:41:06 tls Exp $ */ + +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.2.3, July 18th, 2005 + + Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.2.3" +#define ZLIB_VERNUM 0x1230 + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms will be added later and will have the same + stream interface. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. + + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + + This library can optionally read and write gzip streams in memory as well. + + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: binary or text */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +#define Z_BLOCK 5 +/* Allowed flush values; see deflate() and inflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative + * values are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_UNKNOWN 2 +/* Possible values of the data_type field (though see inflate()) */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at + all (the input data is simply copied a block at a time). + Z_DEFAULT_COMPRESSION requests a default compromise between speed and + compression (currently equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level, + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce some + output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK + and with zero avail_out, it must be called again after making room in the + output buffer because there might be more output pending. + + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumualte before producing output, in order to + maximize compression. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In particular + avail_in is zero after the call if enough output space has been provided + before the call.) Flushing may degrade compression for some compression + algorithms and so it should be used only when necessary. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that + avail_out is greater than six to avoid repeated flush markers due to + avail_out == 0 on return. + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + the value returned by deflateBound (see below). If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not + fatal, and deflate() can be called again with more input and more output + space to continue compressing. +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, + msg may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the exact + value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller. msg is set to null if there is no error + message. inflateInit does not perform any decompression apart from reading + the zlib header if present: this will be done by inflate(). (So next_in and + avail_in may be modified, but next_out and avail_out are unchanged.) +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there + is no more input data or no more space in the output buffer (see below + about the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, + Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() stop + if and when it gets to the next deflate block boundary. When decoding the + zlib or gzip format, this will cause inflate() to return immediately after + the header and before the first block. When doing a raw inflate, inflate() + will go ahead and process the first block, and will return when it gets to + the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + Also to assist in this, on return inflate() will set strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 + if inflate() is currently decoding the last block in the deflate stream, + plus 128 if inflate() returned immediately after decoding an end-of-block + code or decoding the complete header up to just before the first byte of the + deflate stream. The end-of-block will not be indicated until all of the + uncompressed data from that block has been written to strm->next_out. The + number of unused bits may in general be greater than seven, except when + bit 7 of data_type is set, in which case the number of unused bits will be + less than eight. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster approach + may be used for the single inflate() call. + + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the only effect of the flush parameter in this implementation + is on the return value of inflate(), as noted below, or when it returns early + because Z_BLOCK is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the adler32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the adler32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed adler32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() will decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically. Any information + contained in the gzip header is not retained, so applications that need that + information should instead use raw inflate, see inflateInit2() below, or + inflateBack() and perform their own processing of the gzip header and + trailer. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value), Z_STREAM_ERROR if the stream structure was inconsistent (for example + if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, + Z_BUF_ERROR if no progress is possible or if there was not enough room in the + output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may then + call inflateSync() to look for a good compression block if a partial recovery + of the data is desired. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by + the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + windowBits can also be -8..-15 for raw deflate. In this case, -windowBits + determines the window size. deflate() will then generate raw deflate data + with no zlib header or trailer, and will not compute an adler32 check value. + + windowBits can also be greater than 15 for optional gzip encoding. Add + 16 to windowBits to write a simple gzip header and trailer around the + compressed data instead of a zlib wrapper. The gzip header will have no + file name, no extra data, no comment, no modification time (set to zero), + no header crc, and the operating system will be set to 255 (unknown). If a + gzip stream is being written, strm->adler is a crc32 instead of an adler32. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match), or Z_RLE to limit match distances to one (run-length + encoding). Filtered data consists mostly of small values with a somewhat + random distribution. In this case, the compression algorithm is tuned to + compress them better. The effect of Z_FILTERED is to force more Huffman + coding and less string matching; it is somewhat intermediate between + Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as + Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy + parameter only affects the compression ratio but not the correctness of the + compressed output even if it is not set appropriately. Z_FIXED prevents the + use of dynamic Huffman codes, allowing for a simpler decoder for special + applications. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid + method). msg is set to null if there is no error message. deflateInit2 does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any + call of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size in + deflate or deflate2. Thus the strings most likely to be useful should be + put at the end of the dictionary, not at the front. In addition, the + current implementation of deflate will use at most the window size minus + 262 bytes of the provided dictionary. + + Upon return of this function, strm->adler is set to the adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) If a raw deflate was requested, then the + adler32 value is not computed and strm->adler is not set. + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different + strategy. If the compression level is changed, the input available so far + is compressed with the old level (and may be flushed); the new level will + take effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to + be compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR + if strm->avail_out was zero. +*/ + +ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain)); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, + uLong sourceLen)); +/* + deflateBound() returns an upper bound on the compressed size after + deflation of sourceLen bytes. It must be called after deflateInit() + or deflateInit2(). This would be used to allocate an output buffer + for deflation in a single pass, and so would be called before deflate(). +*/ + +ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + deflatePrime() inserts bits in the deflate output stream. The intent + is that this function is used to start off the deflate output with the + bits leftover from a previous deflate stream when appending to it. As such, + this function can only be used for raw deflate, and must be used before the + first deflate() call after a deflateInit2() or deflateReset(). bits must be + less than or equal to 16, and that many of the least significant bits of + value will be inserted in the output. + + deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, + gz_headerp head)); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to 255, with no extra, name, or comment + fields. The gzip header is returned to the default state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. windowBits must be greater than or equal to the windowBits value + provided to deflateInit2() while compressing, or it must be equal to 15 if + deflateInit2() was not used. If a compressed stream with a larger window + size is given as input, inflate() will return with the error code + Z_DATA_ERROR instead of trying to allocate a larger window. + + windowBits can also be -8..-15 for raw inflate. In this case, -windowBits + determines the window size. inflate() will then process raw deflate data, + not looking for a zlib or gzip header, not generating a check value, and not + looking for any check values for comparison at the end of the stream. This + is for use with other formats that use the deflate compressed data format + such as zip. Those formats provide their own check values. If a custom + format is developed using the raw deflate format for compressed data, it is + recommended that a check value such as an adler32 or a crc32 be applied to + the uncompressed data as is done in the zlib, gzip, and zip formats. For + most applications, the zlib format should be used as is. Note that comments + above on the use in deflateInit2() applies to the magnitude of windowBits. + + windowBits can also be greater than 15 for optional gzip decoding. Add + 32 to windowBits to enable zlib and gzip decoding with automatic header + detection, or add 16 to decode only the gzip format (the zlib format will + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is + a crc32 instead of an adler32. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg + is set to null if there is no error message. inflateInit2 does not perform + any decompression apart from reading the zlib header if present: this will + be done by inflate(). (So next_in and avail_in may be modified, but next_out + and avail_out are unchanged.) +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the adler32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called + immediately after inflateInit2() or inflateReset() and before any call of + inflate() to set the dictionary. The application must insure that the + dictionary that was used for compression is provided. + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a full flush point (see above the + description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no flush point has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when randomly accessing a large stream. The + first pass through the stream can periodically record the inflate state, + allowing restarting inflate at those points when randomly accessing the + stream. + + inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, + gz_headerp head)); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK can be used to + force inflate() to return immediately after header processing is complete + and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When + any of extra, name, or comment are not Z_NULL and the respective field is + not present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, + unsigned char FAR *window)); + + Initialize the internal stream state for decompression using inflateBack() + calls. The fields zalloc, zfree and opaque in strm must be initialized + before the call. If zalloc and zfree are Z_NULL, then the default library- + derived memory allocation routines are used. windowBits is the base two + logarithm of the window size, in the range 8..15. window is a caller + supplied buffer of that size. Except for special applications where it is + assured that deflate was used with small window sizes, windowBits must be 15 + and a 32K byte window must be supplied to be able to decompress general + deflate streams. + + See inflateBack() for the usage of these routines. + + inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of + the paramaters are invalid, Z_MEM_ERROR if the internal state could not + be allocated, or Z_VERSION_ERROR if the version of the library does not + match the version of the header file. +*/ + +typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); +typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); + +ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +/* + inflateBack() does a raw inflate with a single call using a call-back + interface for input and output. This is more efficient than inflate() for + file i/o applications in that it avoids copying between the output and the + sliding window by simply making the window itself the output buffer. This + function trusts the application to not change the output buffer passed by + the output function, at least until inflateBack() returns. + + inflateBackInit() must be called first to allocate the internal state + and to initialize the state with the user-provided window buffer. + inflateBack() may then be used multiple times to inflate a complete, raw + deflate stream with each call. inflateBackEnd() is then called to free + the allocated state. + + A raw deflate stream is one with no zlib or gzip header or trailer. + This routine would normally be used in a utility that reads zip or gzip + files and writes out uncompressed files. The utility would decode the + header and process the trailer on its own, hence this routine expects + only the raw deflate stream to decompress. This is different from the + normal behavior of inflate(), which expects either a zlib or gzip header and + trailer around the deflate stream. + + inflateBack() uses two subroutines supplied by the caller that are then + called by inflateBack() for input and output. inflateBack() calls those + routines until it reads a complete deflate stream and writes out all of the + uncompressed data, or until it encounters an error. The function's + parameters and return types are defined above in the in_func and out_func + typedefs. inflateBack() will call in(in_desc, &buf) which should return the + number of bytes of provided input, and a pointer to that input in buf. If + there is no input available, in() must return zero--buf is ignored in that + case--and inflateBack() will return a buffer error. inflateBack() will call + out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() + should return zero on success, or non-zero on failure. If out() returns + non-zero, inflateBack() will return with an error. Neither in() nor out() + are permitted to change the contents of the window provided to + inflateBackInit(), which is also the buffer that out() uses to write from. + The length written by out() will be at most the window size. Any non-zero + amount of input may be provided by in(). + + For convenience, inflateBack() can be provided input on the first call by + setting strm->next_in and strm->avail_in. If that input is exhausted, then + in() will be called. Therefore strm->next_in must be initialized before + calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called + immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in + must also be initialized, and then if strm->avail_in is not zero, input will + initially be taken from strm->next_in[0 .. strm->avail_in - 1]. + + The in_desc and out_desc parameters of inflateBack() is passed as the + first parameter of in() and out() respectively when they are called. These + descriptors can be optionally used to pass any information that the caller- + supplied in() and out() functions need to do their job. + + On return, inflateBack() will set strm->next_in and strm->avail_in to + pass back any unused input that was provided by the last in() call. The + return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR + if in() or out() returned an error, Z_DATA_ERROR if there was a format + error in the deflate stream (in which case strm->msg is set to indicate the + nature of the error), or Z_STREAM_ERROR if the stream was not properly + initialized. In the case of Z_BUF_ERROR, an input or output error can be + distinguished using strm->next_in which will be Z_NULL only if in() returned + an error. If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to + out() returning non-zero. (in() will always be called before out(), so + strm->next_in is assured to be defined if out() returns non-zero.) Note + that inflateBack() cannot return Z_OK. +*/ + +ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); +/* + All memory allocated by inflateBackInit() is freed. + + inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream + state was inconsistent. +*/ + +ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: ZLIB_DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + + + /* utility functions */ + +/* + The following utility functions are implemented on top of the + basic stream-oriented functions. To simplify the interface, some + default options are assumed (compression level and memory usage, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be at least the value returned + by compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + This function can be used to compress a whole file at once if the + input file is mmap'ed. + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before + a compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. +*/ + + +typedef voidp gzFile; + +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); +/* + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb") but can also include a compression level + ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for + Huffman only compression as in "wb1h", or 'R' for run-length encoding + as in "wb1R". (See the description of deflateInit2 for more information + about the strategy parameter.) + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. + + gzopen returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). */ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen() associates a gzFile with the file descriptor fd. File + descriptors are obtained from calls like open, dup, creat, pipe or + fileno (in the file has been previously opened with fopen). + The mode parameter is as in gzopen. + The next call of gzclose on the returned gzFile will also close the + file descriptor fd, just like fclose(fdopen(fd), mode) closes the file + descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). + gzdopen returns NULL if there was insufficient memory to allocate + the (de)compression state. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. + If the input file was not in gzip format, gzread copies the given number + of bytes into the buffer. + gzread returns the number of uncompressed bytes actually read (0 for + end of file, -1 for error). */ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + voidpc buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes actually written + (0 in case of error). +*/ + +ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). The number of + uncompressed bytes written is limited to 4095. The caller should assure that + this limit is not exceeded. If it is exceeded, then gzprintf() will return + return an error (0) with nothing written. In this case, there may also be a + buffer overflow with unpredictable consequences, which is possible only if + zlib was compiled with the insecure functions sprintf() or vsprintf() + because the secure snprintf() or vsnprintf() functions were not available. +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or + a newline character is read and transferred to buf, or an end-of-file + condition is encountered. The string is then terminated with a null + character. + gzgets returns buf, or Z_NULL in case of error. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ + +ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); +/* + Push one character back onto the stream to be read again later. + Only one character of push-back is allowed. gzungetc() returns the + character pushed, or -1 on failure. gzungetc() will fail if a + character has been pushed but not read yet, or if c is -1. The pushed + character will be discarded if the stream is repositioned with gzseek() + or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. The return value is the zlib + error number (see function gzerror below). gzflush returns Z_OK if + the flush parameter is Z_FINISH and all output could be flushed. + gzflush should be called only when strictly necessary because it can + degrade compression. +*/ + +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); +/* + Sets the starting position for the next gzread or gzwrite on the + given compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); +/* + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ + +ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); +/* + Returns 1 if file is being read directly without decompression, otherwise + zero. +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. The return value is the zlib + error number (see function gzerror below). +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ + +ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); +/* + Clears the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the + compression library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, + z_off_t len2)); +/* + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. +*/ + +#if !defined(_KERNEL) && !defined(_STANDALONE) +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +#endif +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is NULL, this function returns the required initial + value for the for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); + +/* + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, + unsigned char FAR *window, + const char *version, + int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) +#define inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, sizeof(z_stream)) + + +#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; /* hack for buggy compilers */ +#endif + +ZEXTERN const char * ZEXPORT zError OF((int)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); +ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); + +#ifdef __cplusplus +} +#endif + +#endif /* ZLIB_H */ diff --git a/common/dist/zlib/zutil.c b/common/dist/zlib/zutil.c new file mode 100644 index 000000000..41507d6b8 --- /dev/null +++ b/common/dist/zlib/zutil.c @@ -0,0 +1,320 @@ +/* $NetBSD: zutil.c,v 1.2 2006/01/16 17:02:29 christos Exp $ */ + +/* zutil.c -- target dependent utility functions for the compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) Id */ + +#include "zutil.h" + +#ifndef NO_DUMMY_DECL +struct internal_state {int dummy;}; /* for buggy compilers */ +#endif + +const char * const z_errmsg[10] = { +"need dictionary", /* Z_NEED_DICT 2 */ +"stream end", /* Z_STREAM_END 1 */ +"", /* Z_OK 0 */ +"file error", /* Z_ERRNO (-1) */ +"stream error", /* Z_STREAM_ERROR (-2) */ +"data error", /* Z_DATA_ERROR (-3) */ +"insufficient memory", /* Z_MEM_ERROR (-4) */ +"buffer error", /* Z_BUF_ERROR (-5) */ +"incompatible version",/* Z_VERSION_ERROR (-6) */ +""}; + + +const char * ZEXPORT zlibVersion() +{ + return ZLIB_VERSION; +} + +uLong ZEXPORT zlibCompileFlags() +{ + uLong flags; + + flags = 0; + switch (sizeof(uInt)) { + case 2: break; + case 4: flags += 1; break; + case 8: flags += 2; break; + default: flags += 3; + } + switch (sizeof(uLong)) { + case 2: break; + case 4: flags += 1 << 2; break; + case 8: flags += 2 << 2; break; + default: flags += 3 << 2; + } + switch (sizeof(voidpf)) { + case 2: break; + case 4: flags += 1 << 4; break; + case 8: flags += 2 << 4; break; + default: flags += 3 << 4; + } + switch (sizeof(z_off_t)) { + case 2: break; + case 4: flags += 1 << 6; break; + case 8: flags += 2 << 6; break; + default: flags += 3 << 6; + } +#ifdef ZLIB_DEBUG + flags += 1 << 8; +#endif +#if defined(ASMV) || defined(ASMINF) + flags += 1 << 9; +#endif +#ifdef ZLIB_WINAPI + flags += 1 << 10; +#endif +#ifdef BUILDFIXED + flags += 1 << 12; +#endif +#ifdef DYNAMIC_CRC_TABLE + flags += 1 << 13; +#endif +#ifdef NO_GZCOMPRESS + flags += 1L << 16; +#endif +#ifdef NO_GZIP + flags += 1L << 17; +#endif +#ifdef PKZIP_BUG_WORKAROUND + flags += 1L << 20; +#endif +#ifdef FASTEST + flags += 1L << 21; +#endif +#ifdef STDC +# ifdef NO_vsnprintf + flags += 1L << 25; +# ifdef HAS_vsprintf_void + flags += 1L << 26; +# endif +# else +# ifdef HAS_vsnprintf_void + flags += 1L << 26; +# endif +# endif +#else + flags += 1L << 24; +# ifdef NO_snprintf + flags += 1L << 25; +# ifdef HAS_sprintf_void + flags += 1L << 26; +# endif +# else +# ifdef HAS_snprintf_void + flags += 1L << 26; +# endif +# endif +#endif + return flags; +} + +#ifdef ZLIB_DEBUG + +# ifndef verbose +# define verbose 0 +# endif +int z_verbose = verbose; + +void z_error (m) + char *m; +{ + fprintf(stderr, "%s\n", m); + exit(1); +} +#endif + +/* exported to allow conversion of error code to string for compress() and + * uncompress() + */ +const char * ZEXPORT zError(err) + int err; +{ + return ERR_MSG(err); +} + +#if defined(_WIN32_WCE) + /* The Microsoft C Run-Time Library for Windows CE doesn't have + * errno. We define it as a global variable to simplify porting. + * Its value is always 0 and should not be used. + */ + int errno = 0; +#endif + +#ifndef HAVE_MEMCPY + +void zmemcpy(dest, source, len) + Bytef* dest; + const Bytef* source; + uInt len; +{ + if (len == 0) return; + do { + *dest++ = *source++; /* ??? to be unrolled */ + } while (--len != 0); +} + +int zmemcmp(s1, s2, len) + const Bytef* s1; + const Bytef* s2; + uInt len; +{ + uInt j; + + for (j = 0; j < len; j++) { + if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; + } + return 0; +} + +void zmemzero(dest, len) + Bytef* dest; + uInt len; +{ + if (len == 0) return; + do { + *dest++ = 0; /* ??? to be unrolled */ + } while (--len != 0); +} +#endif + + +#ifdef SYS16BIT + +#ifdef __TURBOC__ +/* Turbo C in 16-bit mode */ + +# define MY_ZCALLOC + +/* Turbo C malloc() does not allow dynamic allocation of 64K bytes + * and farmalloc(64K) returns a pointer with an offset of 8, so we + * must fix the pointer. Warning: the pointer must be put back to its + * original form in order to free it, use zcfree(). + */ + +#define MAX_PTR 10 +/* 10*64K = 640K */ + +local int next_ptr = 0; + +typedef struct ptr_table_s { + voidpf org_ptr; + voidpf new_ptr; +} ptr_table; + +local ptr_table table[MAX_PTR]; +/* This table is used to remember the original form of pointers + * to large buffers (64K). Such pointers are normalized with a zero offset. + * Since MSDOS is not a preemptive multitasking OS, this table is not + * protected from concurrent access. This hack doesn't work anyway on + * a protected system like OS/2. Use Microsoft C instead. + */ + +voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) +{ + voidpf buf = opaque; /* just to make some compilers happy */ + ulg bsize = (ulg)items*size; + + /* If we allocate less than 65520 bytes, we assume that farmalloc + * will return a usable pointer which doesn't have to be normalized. + */ + if (bsize < 65520L) { + buf = farmalloc(bsize); + if (*(ush*)&buf != 0) return buf; + } else { + buf = farmalloc(bsize + 16L); + } + if (buf == NULL || next_ptr >= MAX_PTR) return NULL; + table[next_ptr].org_ptr = buf; + + /* Normalize the pointer to seg:0 */ + *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; + *(ush*)&buf = 0; + table[next_ptr++].new_ptr = buf; + return buf; +} + +void zcfree (voidpf opaque, voidpf ptr) +{ + int n; + if (*(ush*)&ptr != 0) { /* object < 64K */ + farfree(ptr); + return; + } + /* Find the original pointer */ + for (n = 0; n < next_ptr; n++) { + if (ptr != table[n].new_ptr) continue; + + farfree(table[n].org_ptr); + while (++n < next_ptr) { + table[n-1] = table[n]; + } + next_ptr--; + return; + } + ptr = opaque; /* just to make some compilers happy */ + Assert(0, "zcfree: ptr not found"); +} + +#endif /* __TURBOC__ */ + + +#ifdef M_I86 +/* Microsoft C in 16-bit mode */ + +# define MY_ZCALLOC + +#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) +# define _halloc halloc +# define _hfree hfree +#endif + +voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) +{ + if (opaque) opaque = 0; /* to make compiler happy */ + return _halloc((long)items, size); +} + +void zcfree (voidpf opaque, voidpf ptr) +{ + if (opaque) opaque = 0; /* to make compiler happy */ + _hfree(ptr); +} + +#endif /* M_I86 */ + +#endif /* SYS16BIT */ + + +#ifndef MY_ZCALLOC /* Any system without a special alloc function */ + +#ifndef STDC +extern voidp malloc OF((uInt size)); +extern voidp calloc OF((uInt items, uInt size)); +extern void free OF((voidpf ptr)); +#endif + +voidpf zcalloc (opaque, items, size) + voidpf opaque; + unsigned items; + unsigned size; +{ + if (opaque) items += size - size; /* make compiler happy */ + return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : + (voidpf)calloc(items, size); +} + +void zcfree (opaque, ptr) + voidpf opaque; + voidpf ptr; +{ + free(ptr); + if (opaque) return; /* make compiler happy */ +} + +#endif /* MY_ZCALLOC */ diff --git a/common/dist/zlib/zutil.h b/common/dist/zlib/zutil.h new file mode 100644 index 000000000..6a2751ae8 --- /dev/null +++ b/common/dist/zlib/zutil.h @@ -0,0 +1,278 @@ +/* $NetBSD: zutil.h,v 1.4 2006/01/27 00:45:27 christos Exp $ */ + +/* zutil.h -- internal interface and configuration of the compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) Id */ + +#ifndef ZUTIL_H +#define ZUTIL_H + +#define ZLIB_INTERNAL +#include "zlib.h" + +#if defined(__NetBSD__) && (defined(_KERNEL) || defined(_STANDALONE)) + +/* XXX doesn't seem to need anything at all, but this is for consistency. */ +# include + +#else +#ifdef STDC +# ifndef _WIN32_WCE +# include +# endif +# include +# include +#endif +#ifdef NO_ERRNO_H +# ifdef _WIN32_WCE + /* The Microsoft C Run-Time Library for Windows CE doesn't have + * errno. We define it as a global variable to simplify porting. + * Its value is always 0 and should not be used. We rename it to + * avoid conflict with other libraries that use the same workaround. + */ +# define errno z_errno +# endif + extern int errno; +#else +# ifndef _WIN32_WCE +# include +# endif +#endif +#endif /* __NetBSD__ && (_KERNEL || _STANDALONE) */ + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +typedef unsigned char uch; +typedef uch FAR uchf; +typedef unsigned short ush; +typedef ush FAR ushf; +typedef unsigned long ulg; + +extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ +/* (size given to avoid silly warnings with Visual C++) */ + +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] + +#define ERR_RETURN(strm,err) \ + return (strm->msg = __UNCONST(ERR_MSG(err)), (err)) +/* To be used only when the state is known to be valid */ + + /* common constants */ + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + +#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ + + /* target dependencies */ + +#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) +# define OS_CODE 0x00 +# if defined(__TURBOC__) || defined(__BORLANDC__) +# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) + /* Allow compilation with ANSI keywords only enabled */ + void _Cdecl farfree( void *block ); + void *_Cdecl farmalloc( unsigned long nbytes ); +# else +# include +# endif +# else /* MSC or DJGPP */ +# include +# endif +#endif + +#ifdef AMIGA +# define OS_CODE 0x01 +#endif + +#if defined(VAXC) || defined(VMS) +# define OS_CODE 0x02 +# define F_OPEN(name, mode) \ + fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") +#endif + +#if defined(ATARI) || defined(atarist) +# define OS_CODE 0x05 +#endif + +#ifdef OS2 +# define OS_CODE 0x06 +# ifdef M_I86 + #include +# endif +#endif + +#if defined(MACOS) || defined(TARGET_OS_MAC) +# define OS_CODE 0x07 +# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include /* for fdopen */ +# else +# ifndef fdopen +# define fdopen(fd,mode) NULL /* No fdopen() */ +# endif +# endif +#endif + +#ifdef TOPS20 +# define OS_CODE 0x0a +#endif + +#ifdef WIN32 +# ifndef __CYGWIN__ /* Cygwin is Unix, not Win32 */ +# define OS_CODE 0x0b +# endif +#endif + +#ifdef __50SERIES /* Prime/PRIMOS */ +# define OS_CODE 0x0f +#endif + +#if defined(_BEOS_) || defined(RISCOS) +# define fdopen(fd,mode) NULL /* No fdopen() */ +#endif + +#if (defined(_MSC_VER) && (_MSC_VER > 600)) +# if defined(_WIN32_WCE) +# define fdopen(fd,mode) NULL /* No fdopen() */ +# ifndef _PTRDIFF_T_DEFINED + typedef int ptrdiff_t; +# define _PTRDIFF_T_DEFINED +# endif +# else +# define fdopen(fd,type) _fdopen(fd,type) +# endif +#endif + + /* common defaults */ + +#ifndef OS_CODE +# define OS_CODE 0x03 /* assume Unix */ +#endif + +#ifndef F_OPEN +# define F_OPEN(name, mode) fopen((name), (mode)) +#endif + + /* functions */ + +#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif +#if defined(__CYGWIN__) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif +#ifndef HAVE_VSNPRINTF +# ifdef MSDOS + /* vsnprintf may exist on some MS-DOS compilers (DJGPP?), + but for now we just assume it doesn't. */ +# define NO_vsnprintf +# endif +# ifdef __TURBOC__ +# define NO_vsnprintf +# endif +# ifdef WIN32 + /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ +# if !defined(vsnprintf) && !defined(NO_vsnprintf) +# define vsnprintf _vsnprintf +# endif +# endif +# ifdef __SASC +# define NO_vsnprintf +# endif +#endif +#ifdef VMS +# define NO_vsnprintf +#endif + +#if defined(pyr) +# define NO_MEMCPY +#endif +#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) + /* Use our own functions for small and medium model with MSC <= 5.0. + * You may have to use the same strategy for Borland C (untested). + * The __SC__ check is for Symantec. + */ +# define NO_MEMCPY +#endif +#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) +# define HAVE_MEMCPY +#endif +#ifdef HAVE_MEMCPY +# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ +# define zmemcpy _fmemcpy +# define zmemcmp _fmemcmp +# define zmemzero(dest, len) _fmemset(dest, 0, len) +# else +# define zmemcpy memcpy +# define zmemcmp memcmp +# define zmemzero(dest, len) memset(dest, 0, len) +# endif +#else + extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); + extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); + extern void zmemzero OF((Bytef* dest, uInt len)); +#endif + +/* Diagnostic functions */ +#if defined(ZLIB_DEBUG) && !(defined(_KERNEL) || defined(_STANDALONE)) +# include + extern int z_verbose; + extern void z_error OF((char *m)); +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) {if (z_verbose>=0) fprintf x ;} +# define Tracev(x) {if (z_verbose>0) fprintf x ;} +# define Tracevv(x) {if (z_verbose>1) fprintf x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + + +voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); +void zcfree OF((voidpf opaque, voidpf ptr)); + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) +#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} + +#endif /* ZUTIL_H */ diff --git a/releasetools/nbsd_ports b/releasetools/nbsd_ports index ef452a648..6570be74c 100644 --- a/releasetools/nbsd_ports +++ b/releasetools/nbsd_ports @@ -16,6 +16,7 @@ 2011/08/29 14:48:46,bin/rm 2011/08/29 14:49:38,bin/rmdir 2012/10/17 12:00:00,build.sh +2012/10/17 12:00:00,common/dist/zlib 2012/10/17 12:00:00,common/include/prop 2012/10/17 12:00:00,common/lib/libc 2012/10/17 12:00:00,common/lib/libprop -- 2.44.0