From: David van Moolenbroek <david@minix3.org>
Date: Wed, 13 Feb 2013 22:57:28 +0000 (+0100)
Subject: rtl8169: add support for RTL8101E family
X-Git-Tag: v3.2.1~2
X-Git-Url: http://zhaoyanbai.com/repos/%22http:/www.isc.org/icons/man.named-rrchecker.html?a=commitdiff_plain;h=91cea699bb2ee39b5e7f2c549af57d4b8a4b9d56;p=minix.git

rtl8169: add support for RTL8101E family

All cards in this family (RTL8101E, RTL8102E, RTL8103E, RTL8105E,
possibly others) should be recognized based on the added PCI ID.
The hardware version number of the RTL8105E has been added only to
serve as an example of a card that does not require modification of
certain undocumented registers.
---

diff --git a/drivers/pci/pci_table.c b/drivers/pci/pci_table.c
index f53a9e0b2..e468f2948 100644
--- a/drivers/pci/pci_table.c
+++ b/drivers/pci/pci_table.c
@@ -92,6 +92,7 @@ struct pci_device pci_device_table[]=
 	{ 0x10DE, 0x0110, "nVidia GeForce2 MX [NV11]" },
 	{ 0x10EC, 0x8029, "Realtek RTL8029" },
 	{ 0x10EC, 0x8129, "Realtek RTL8129" },
+	{ 0x10EC, 0x8136, "Realtek RTL8101E Family" },
 	{ 0x10EC, 0x8139, "Realtek RTL8139" },
 	{ 0x10EC, 0x8167, "Realtek RTL8169/8110 Family Gigabit NIC" },
 	{ 0x10EC, 0x8169, "Realtek RTL8169" },
diff --git a/drivers/rtl8169/rtl8169.c b/drivers/rtl8169/rtl8169.c
index 6a3490205..587514ecd 100644
--- a/drivers/rtl8169/rtl8169.c
+++ b/drivers/rtl8169/rtl8169.c
@@ -980,6 +980,9 @@ re_t *rep;
 		printf("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
 		rl_outw(port, 0x82, 0x01);
 		break;
+	case RL_TCR_HWVER_RTL8105E:
+		rep->re_model = "RTL8105E";
+		break;
 	default:
 		rep->re_model = "Unknown";
 		rep->re_mac = t;
@@ -1012,14 +1015,21 @@ re_t *rep;
 
 	rl_outw(port, RL_9346CR, RL_9346CR_EEM_CONFIG);	/* Unlock */
 
-	t = rl_inw(port, RL_CPLUSCMD);
-	if ((rep->re_mac == RL_TCR_HWVER_RTL8169S) ||
-	    (rep->re_mac == RL_TCR_HWVER_RTL8110S)) {
+	switch (rep->re_mac) {
+	case RL_TCR_HWVER_RTL8169S:
+	case RL_TCR_HWVER_RTL8110S:
 		printf("Set MAC Reg C+CR Offset 0xE0. "
 			"Bit-3 and bit-14 MUST be 1\n");
+		t = rl_inw(port, RL_CPLUSCMD);
 		rl_outw(port, RL_CPLUSCMD, t | RL_CPLUS_MULRW | (1 << 14));
-	} else
+		break;
+	case RL_TCR_HWVER_RTL8169:
+	case RL_TCR_HWVER_RTL8169SB:
+	case RL_TCR_HWVER_RTL8110SCd:
+		t = rl_inw(port, RL_CPLUSCMD);
 		rl_outw(port, RL_CPLUSCMD, t | RL_CPLUS_MULRW);
+		break;
+	}
 
 	rl_outw(port, RL_INTRMITIGATE, 0x00);
 
diff --git a/drivers/rtl8169/rtl8169.conf b/drivers/rtl8169/rtl8169.conf
index b97a64278..79a21dc4b 100644
--- a/drivers/rtl8169/rtl8169.conf
+++ b/drivers/rtl8169/rtl8169.conf
@@ -9,6 +9,7 @@ service rtl8169
                 DEVIO           # 21
         ;
         pci device      10ec/8129;
+        pci device      10ec/8136;
         pci device      10ec/8167;
         pci device      10ec/8169;
         pci device      10ec/8168;
diff --git a/drivers/rtl8169/rtl8169.h b/drivers/rtl8169/rtl8169.h
index d806c589a..19f4dc0ef 100644
--- a/drivers/rtl8169/rtl8169.h
+++ b/drivers/rtl8169/rtl8169.h
@@ -114,6 +114,7 @@
 #define			RL_TCR_HWVER_RTL8110S	0x04000000 /* RTL8110S */
 #define			RL_TCR_HWVER_RTL8169SB	0x10000000 /* RTL8169sb/8110sb */
 #define			RL_TCR_HWVER_RTL8110SCd	0x18000000 /* RTL8169sc/8110sc */
+#define			RL_TCR_HWVER_RTL8105E	0x40800000 /* RTL8105E */
 #define		RL_TCR_RES1	0x00380000 /* Reserved */
 #define		RL_TCR_LBK_M	0x00060000 /* Loopback Test */
 #define			RL_TCR_LBK_NORMAL	0x00000000 /* Normal */