From: Jorrit Herder Date: Fri, 5 Aug 2005 07:57:13 +0000 (+0000) Subject: *** empty log message *** X-Git-Tag: v3.1.0~448 X-Git-Url: http://zhaoyanbai.com/repos/%22http:/www.isc.org/icons/man.named-checkzone.html?a=commitdiff_plain;h=df40b77018028cc260c89ffce69c7bd42f9216d3;p=minix.git *** empty log message *** --- diff --git a/drivers/cmos/readclock.c b/drivers/cmos/readclock.c new file mode 100755 index 000000000..be8d69357 --- /dev/null +++ b/drivers/cmos/readclock.c @@ -0,0 +1,226 @@ +/* setime - set the system time from the real time clock + Authors: T. Holm & E. Froese + Adapted by: Jorrit .N. Herder */ + +#define _MINIX +/************************************************************************/ +/* Readclock was updated for security reasons: openeing /dev/mem no */ +/* longer automatically grants I/O privileges to the calling process */ +/* so that the CMOS' clock could not be read from this program. The */ +/* new approach is to rely on the FS to do the CMOS I/O, via the new */ +/* system call CMOSTIME (which only reads the current clock value and */ +/* cannot update the CMOS clock). */ +/* The original readclock.c is still available under backup.c. */ +/************************************************************************/ +/* */ +/* readclock.c */ +/* */ +/* Read the clock value from the 64 byte CMOS RAM */ +/* area, then set system time. */ +/* */ +/* If the machine ID byte is 0xFC or 0xF8, the device */ +/* /dev/mem exists and can be opened for reading, */ +/* and no errors in the CMOS RAM are reported by the */ +/* RTC, then the time is read from the clock RAM */ +/* area maintained by the RTC. */ +/* */ +/* The clock RAM values are decoded and fed to mktime */ +/* to make a time_t value, then stime(2) is called. */ +/* */ +/* This fails if: */ +/* */ +/* If the machine ID does not match 0xFC or 0xF8 (no */ +/* error message.) */ +/* */ +/* If the machine ID is 0xFC or 0xF8 and /dev/mem */ +/* is missing, or cannot be accessed. */ +/* */ +/* If the RTC reports errors in the CMOS RAM. */ +/* */ +/************************************************************************/ +/* origination 1987-Dec-29 efth */ +/* robustness 1990-Oct-06 C. Sylvain */ +/* incorp. B. Evans ideas 1991-Jul-06 C. Sylvain */ +/* set time & calibrate 1992-Dec-17 Kees J. Bot */ +/* clock timezone 1993-Oct-10 Kees J. Bot */ +/* set CMOS clock 1994-Jun-12 Kees J. Bot */ +/* removed set CMOS 2004-Sep-06 Jorrit N. Herder */ +/************************************************************************/ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_RETRIES 1 + +int nflag = 0; /* Tell what, but don't do it. */ +int y2kflag = 0; /* Interpret 1980 as 2000 for clock with Y2K bug. */ + +char clocktz[128]; /* Timezone of the clock. */ + +#define MACH_ID_ADDR 0xFFFFE /* BIOS Machine ID at FFFF:000E */ + +#define PC_AT 0xFC /* Machine ID byte for PC/AT, + PC/XT286, and PS/2 Models 50, 60 */ +#define PS_386 0xF8 /* Machine ID byte for PS/2 Model 80 */ + +/* Manufacturers usually use the ID value of the IBM model they emulate. + * However some manufacturers, notably HP and COMPAQ, have had different + * ideas in the past. + * + * Machine ID byte information source: + * _The Programmer's PC Sourcebook_ by Thom Hogan, + * published by Microsoft Press + */ + +void errmsg(char *s); +int bcd_to_dec(int n); +int dec_to_bcd(int n); +void usage(void); + +#define CMOS_DEV "/dev/cmos" + +PUBLIC int main(int argc, char **argv) +{ + int fd; + struct tm time1; + struct tm time2; + struct tm tmnow; + char date[64]; + time_t now, rtc; + int i, s, mem; + unsigned char mach_id, cmos_state; + struct sysgetenv sysgetenv; + message m; + int request; + + + /* Process options. */ + while (argc > 1) { + char *p = *++argv; + + if (*p++ != '-') usage(); + + while (*p != 0) { + switch (*p++) { + case 'n': nflag = 1; break; + case '2': y2kflag = 1; break; + default: usage(); + } + } + argc--; + } + +#if DEAD_CODE + /* The hardware clock may run in a different time zone, likely GMT or + * winter time. Select that time zone. + */ + strcpy(clocktz, "TZ="); + sysgetenv.key = "TZ"; + sysgetenv.keylen = 2+1; + sysgetenv.val = clocktz+3; + sysgetenv.vallen = sizeof(clocktz)-3; + if (svrctl(SYSGETENV, &sysgetenv) == 0) { + putenv(clocktz); + tzset(); + } +#endif + + /* Read the CMOS real time clock. */ + for (i = 0; i < MAX_RETRIES; i++) { + + /* sleep, unless first iteration */ + if (i > 0) sleep(5); + + /* Open the CMOS device to read the system time. */ + if ((fd = open(CMOS_DEV, O_RDONLY)) < 0) { + fprintf(stderr, "Couldn't open CMOS device: %d.\n",s); + exit(1); + } + request = (y2kflag) ? CIOCGETTIME : CIOCGETTIMEY2K; + if ((s=ioctl(fd, request, (void *) &time1)) < 0) { + fprintf(stderr, "Couldn't do CMOS ioctl: %d.\n",s); + exit(1); + } + close(fd); + + now = time(NULL); + + time1.tm_isdst = -1; /* Do timezone calculations. */ + time2 = time1; + + rtc= mktime(&time1); /* Transform to a time_t. */ + if (rtc != -1) { + printf("rtc from CMOS driver: %u\n", rtc); + break; + } + + fprintf(stderr, +"readclock: Invalid time read from CMOS RTC: %d-%02d-%02d %02d:%02d:%02d\n", + time2.tm_year+1900, time2.tm_mon+1, time2.tm_mday, + time2.tm_hour, time2.tm_min, time2.tm_sec); + } + if (i >= MAX_RETRIES) exit(1); + + /* Now set system time. */ + if (nflag) { + printf("stime(%lu)\n", (unsigned long) rtc); + } else { + if (stime(&rtc) < 0) { + errmsg( "Not allowed to set time." ); + exit(1); + } + } + tmnow = *localtime(&rtc); + if (strftime(date, sizeof(date), + "%a %b %d %H:%M:%S %Z %Y", &tmnow) != 0) { + if (date[8] == '0') date[8]= ' '; +#if 0 + printf("%s [CMOS read via FS, see command/ibm/readclock.c]\n", date); +#endif + } + exit(0); +} + +void errmsg(char *s) +{ + static char *prompt = "readclock: "; + + fprintf(stderr, "%s%s\n", prompt, s); + prompt = ""; +} + + +int bcd_to_dec(int n) +{ + return ((n >> 4) & 0x0F) * 10 + (n & 0x0F); +} + +int dec_to_bcd(int n) +{ + return ((n / 10) << 4) | (n % 10); +} + +void usage(void) +{ + fprintf(stderr, "Usage: settime [-n2]\n"); + exit(1); +}