# $NetBSD: Makefile,v 1.22 2007/12/31 15:31:24 ad Exp $
# @(#)Makefile 8.1 (Berkeley) 5/31/93
-SUBDIR= cat date echo ed \
+SUBDIR= cat date echo ed expr \
mkdir pax rm rmdir test
.include <bsd.subdir.mk>
--- /dev/null
+# $NetBSD: Makefile,v 1.14 2000/09/19 17:20:00 jdolecek Exp $
+
+PROG= expr
+SRCS= expr.y
+
+.include <bsd.prog.mk>
--- /dev/null
+.\" $NetBSD: expr.1,v 1.33 2012/08/12 17:27:04 wiz Exp $
+.\"
+.\" Copyright (c) 2000,2003 The NetBSD Foundation, Inc.
+.\" All rights reserved.
+.\"
+.\" This code is derived from software contributed to The NetBSD Foundation
+.\" by J.T. Conklin <jtc@NetBSD.org> and Jaromir Dolecek <jdolecek@NetBSD.org>.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd April 20, 2004
+.Dt EXPR 1
+.Os
+.Sh NAME
+.Nm expr
+.Nd evaluate expression
+.Sh SYNOPSIS
+.Nm
+.Ar expression
+.Sh DESCRIPTION
+The
+.Nm
+utility evaluates
+.Ar expression
+and writes the result on standard output.
+.Pp
+All operators are separate arguments to the
+.Nm
+utility.
+Characters special to the command interpreter must be escaped.
+.Pp
+Operators are listed below in order of increasing precedence.
+Operators with equal precedence are grouped within { } symbols.
+.Bl -tag -width indent
+.It Ar expr1 Li \&| Ar expr2
+Returns the evaluation of
+.Ar expr1
+if it is neither an empty string nor zero;
+otherwise, returns the evaluation of
+.Ar expr2 .
+.It Ar expr1 Li \*[Am] Ar expr2
+Returns the evaluation of
+.Ar expr1
+if neither expression evaluates to an empty string or zero;
+otherwise, returns zero.
+.It Ar expr1 Li "{=, \*[Gt], \*[Ge], \*[Lt], \*[Le], !=}" Ar expr2
+Returns the results of integer comparison if both arguments are integers;
+otherwise, returns the results of string comparison using the locale-specific
+collation sequence.
+The result of each comparison is 1 if the specified relation is true,
+or 0 if the relation is false.
+.It Ar expr1 Li "{+, -}" Ar expr2
+Returns the results of addition or subtraction of integer-valued arguments.
+.It Ar expr1 Li "{*, /, %}" Ar expr2
+Returns the results of multiplication, integer division, or remainder of integer-valued arguments.
+.It Ar expr1 Li \&: Ar expr2
+The
+.Dq \&:
+operator matches
+.Ar expr1
+against
+.Ar expr2 ,
+which must be a regular expression.
+The regular expression is anchored
+to the beginning of the string with an implicit
+.Dq ^ .
+.Pp
+If the match succeeds and the pattern contains at least one regular
+expression subexpression
+.Dq "\e(...\e)" ,
+the string corresponding to
+.Dq "\e1"
+is returned;
+otherwise the matching operator returns the number of characters matched.
+If the match fails and the pattern contains a regular expression subexpression
+the null string is returned;
+otherwise 0.
+.It "( " Ar expr No " )"
+Parentheses are used for grouping in the usual manner.
+.El
+.Pp
+Additionally, the following keywords are recognized:
+.Bl -tag -width indent
+.It length Ar expr
+Returns the length of the specified string in bytes.
+.El
+.Pp
+Operator precedence (from highest to lowest):
+.Bl -enum -compact -offset indent
+.It
+parentheses
+.It
+length
+.It
+.Dq \&:
+.It
+.Dq "*" ,
+.Dq "/" ,
+and
+.Dq "%"
+.It
+.Dq "+"
+and
+.Dq "-"
+.It
+compare operators
+.It
+.Dq \*[Am]
+.It
+.Dq \&|
+.El
+.Sh EXIT STATUS
+The
+.Nm
+utility exits with one of the following values:
+.Bl -tag -width Ds -compact
+.It 0
+the expression is neither an empty string nor 0.
+.It 1
+the expression is an empty string or 0.
+.It 2
+the expression is invalid.
+.It \*[Gt]2
+an error occurred (such as memory allocation failure).
+.El
+.Sh EXAMPLES
+.Bl -enum
+.It
+The following example adds one to variable
+.Dq a :
+.Dl a=`expr $a + 1`
+.It
+The following example returns zero, due to subtraction having higher precedence
+than the
+.Dq \*[Am]
+operator:
+.Dl expr 1 '\*[Am]' 1 - 1
+.It
+The following example returns the filename portion of a pathname stored
+in variable
+.Dq a :
+.Dl expr "/$a" Li : '.*/\e(.*\e)'
+.It
+The following example returns the number of characters in variable
+.Dq a :
+.Dl expr $a Li : '.*'
+.El
+.Sh COMPATIBILITY
+This implementation of
+.Nm
+internally uses 64 bit representation of integers and checks for
+over- and underflows.
+It also treats
+.Dq /
+(the division mark) and option
+.Dq --
+correctly depending upon context.
+.Pp
+.Nm
+on other systems (including
+.Nx
+up to and including
+.Nx 1.5 )
+might not be so graceful.
+Arithmetic results might be arbitrarily
+limited on such systems, most commonly to 32 bit quantities.
+This means such
+.Nm
+can only process values between -2147483648 and +2147483647.
+.Pp
+On other systems,
+.Nm
+might also not work correctly for regular expressions where
+either side contains
+.Dq /
+(a single forward slash), like this:
+.Bd -literal -offset indent
+expr / : '.*/\e(.*\e)'
+.Ed
+.Pp
+If this is the case, you might use
+.Dq //
+(a double forward slash)
+to avoid confusion with the division operator:
+.Bd -literal -offset indent
+expr "//$a" : '.*/\e(.*\e)'
+.Ed
+.Pp
+According to
+.St -p1003.2 ,
+.Nm
+has to recognize special option
+.Dq -- ,
+treat it as a delimiter to mark the end of command
+line options, and ignore it.
+Some
+.Nm
+implementations don't recognize it at all; others
+might ignore it even in cases where doing so results in syntax
+error.
+There should be same result for both following examples,
+but it might not always be:
+.Bl -enum -compact -offset indent
+.It
+expr -- : .
+.It
+expr -- -- : .
+.El
+Although
+.Nx
+.Nm
+handles both cases correctly, you should not depend on this behavior
+for portability reasons and avoid passing a bare
+.Dq --
+as the first
+argument.
+.Sh STANDARDS
+The
+.Nm
+utility conforms to
+.St -p1003.2 .
+The
+.Ar length
+keyword is an extension for compatibility with GNU
+.Nm .
+.Sh AUTHORS
+Original implementation was written by
+.An J.T. Conklin
+.Aq jtc@NetBSD.org .
+It was rewritten for
+.Nx 1.6
+by
+.An Jaromir Dolecek
+.Aq jdolecek@NetBSD.org .
+.Sh NOTES
+The empty string
+.Do Dc
+cannot be matched with the intuitive:
+.Bd -literal -offset indent
+expr '' : '$'
+.Ed
+.Pp
+The reason is that the returned number of matched characters (zero)
+is indistinguishable from a failed match, so this returns failure.
+To match the empty string, use something like:
+.Bd -literal -offset indent
+expr x'' : 'x$'
+.Ed
--- /dev/null
+/* $NetBSD: expr.y,v 1.38 2012/03/15 02:02:20 joerg Exp $ */
+
+/*_
+ * Copyright (c) 2000 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Jaromir Dolecek <jdolecek@NetBSD.org> and J.T. Conklin <jtc@NetBSD.org>.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+%{
+#include <sys/cdefs.h>
+#ifndef lint
+__RCSID("$NetBSD: expr.y,v 1.38 2012/03/15 02:02:20 joerg Exp $");
+#endif /* not lint */
+
+#include <sys/types.h>
+
+#include <err.h>
+#include <errno.h>
+#include <limits.h>
+#include <locale.h>
+#include <regex.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+static const char * const *av;
+
+static void yyerror(const char *, ...) __dead;
+static int yylex(void);
+static int is_zero_or_null(const char *);
+static int is_integer(const char *);
+static int64_t perform_arith_op(const char *, const char *, const char *);
+
+int main(int, const char * const *);
+
+#define YYSTYPE const char *
+
+%}
+%token STRING
+%left SPEC_OR
+%left SPEC_AND
+%left COMPARE
+%left ADD_SUB_OPERATOR
+%left MUL_DIV_MOD_OPERATOR
+%left SPEC_REG
+%left LENGTH
+%left LEFT_PARENT RIGHT_PARENT
+
+%%
+
+exp: expr = {
+ (void) printf("%s\n", $1);
+ return (is_zero_or_null($1));
+ }
+ ;
+
+expr: item { $$ = $1; }
+ | expr SPEC_OR expr = {
+ /*
+ * Return evaluation of first expression if it is neither
+ * an empty string nor zero; otherwise, returns the evaluation
+ * of second expression.
+ */
+ if (!is_zero_or_null($1))
+ $$ = $1;
+ else
+ $$ = $3;
+ }
+ | expr SPEC_AND expr = {
+ /*
+ * Returns the evaluation of first expr if neither expression
+ * evaluates to an empty string or zero; otherwise, returns
+ * zero.
+ */
+ if (!is_zero_or_null($1) && !is_zero_or_null($3))
+ $$ = $1;
+ else
+ $$ = "0";
+ }
+ | expr SPEC_REG expr = {
+ /*
+ * The ``:'' operator matches first expr against the second,
+ * which must be a regular expression.
+ */
+ regex_t rp;
+ regmatch_t rm[2];
+ int eval;
+
+ /* compile regular expression */
+ if ((eval = regcomp(&rp, $3, REG_BASIC)) != 0) {
+ char errbuf[256];
+ (void)regerror(eval, &rp, errbuf, sizeof(errbuf));
+ yyerror("%s", errbuf);
+ /* NOT REACHED */
+ }
+
+ /* compare string against pattern -- remember that patterns
+ are anchored to the beginning of the line */
+ if (regexec(&rp, $1, 2, rm, 0) == 0 && rm[0].rm_so == 0) {
+ char *val;
+ if (rm[1].rm_so >= 0) {
+ (void) asprintf(&val, "%.*s",
+ (int) (rm[1].rm_eo - rm[1].rm_so),
+ $1 + rm[1].rm_so);
+ } else {
+ (void) asprintf(&val, "%d",
+ (int)(rm[0].rm_eo - rm[0].rm_so));
+ }
+ if (val == NULL)
+ err(1, NULL);
+ $$ = val;
+ } else {
+ if (rp.re_nsub == 0) {
+ $$ = "0";
+ } else {
+ $$ = "";
+ }
+ }
+
+ }
+ | expr ADD_SUB_OPERATOR expr = {
+ /* Returns the results of addition, subtraction */
+ char *val;
+ int64_t res;
+
+ res = perform_arith_op($1, $2, $3);
+ (void) asprintf(&val, "%lld", (long long int) res);
+ if (val == NULL)
+ err(1, NULL);
+ $$ = val;
+ }
+
+ | expr MUL_DIV_MOD_OPERATOR expr = {
+ /*
+ * Returns the results of multiply, divide or remainder of
+ * numeric-valued arguments.
+ */
+ char *val;
+ int64_t res;
+
+ res = perform_arith_op($1, $2, $3);
+ (void) asprintf(&val, "%lld", (long long int) res);
+ if (val == NULL)
+ err(1, NULL);
+ $$ = val;
+
+ }
+ | expr COMPARE expr = {
+ /*
+ * Returns the results of integer comparison if both arguments
+ * are integers; otherwise, returns the results of string
+ * comparison using the locale-specific collation sequence.
+ * The result of each comparison is 1 if the specified relation
+ * is true, or 0 if the relation is false.
+ */
+
+ int64_t l, r;
+ int res;
+
+ res = 0;
+
+ /*
+ * Slight hack to avoid differences in the compare code
+ * between string and numeric compare.
+ */
+ if (is_integer($1) && is_integer($3)) {
+ /* numeric comparison */
+ l = strtoll($1, NULL, 10);
+ r = strtoll($3, NULL, 10);
+ } else {
+ /* string comparison */
+ l = strcoll($1, $3);
+ r = 0;
+ }
+
+ switch($2[0]) {
+ case '=': /* equal */
+ res = (l == r);
+ break;
+ case '>': /* greater or greater-equal */
+ if ($2[1] == '=')
+ res = (l >= r);
+ else
+ res = (l > r);
+ break;
+ case '<': /* lower or lower-equal */
+ if ($2[1] == '=')
+ res = (l <= r);
+ else
+ res = (l < r);
+ break;
+ case '!': /* not equal */
+ /* the check if this is != was done in yylex() */
+ res = (l != r);
+ }
+
+ $$ = (res) ? "1" : "0";
+
+ }
+ | LEFT_PARENT expr RIGHT_PARENT { $$ = $2; }
+ | LENGTH expr {
+ /*
+ * Return length of 'expr' in bytes.
+ */
+ char *ln;
+
+ asprintf(&ln, "%ld", (long) strlen($2));
+ if (ln == NULL)
+ err(1, NULL);
+ $$ = ln;
+ }
+ ;
+
+item: STRING
+ | ADD_SUB_OPERATOR
+ | MUL_DIV_MOD_OPERATOR
+ | COMPARE
+ | SPEC_OR
+ | SPEC_AND
+ | SPEC_REG
+ | LENGTH
+ ;
+%%
+
+/*
+ * Returns 1 if the string is empty or contains only numeric zero.
+ */
+static int
+is_zero_or_null(const char *str)
+{
+ char *endptr;
+
+ return str[0] == '\0'
+ || ( strtoll(str, &endptr, 10) == 0LL
+ && endptr[0] == '\0');
+}
+
+/*
+ * Returns 1 if the string is an integer.
+ */
+static int
+is_integer(const char *str)
+{
+ char *endptr;
+
+ (void) strtoll(str, &endptr, 10);
+ /* note we treat empty string as valid number */
+ return (endptr[0] == '\0');
+}
+
+static int64_t
+perform_arith_op(const char *left, const char *op, const char *right)
+{
+ int64_t res, sign, l, r;
+ u_int64_t temp;
+
+ res = 0;
+
+ if (!is_integer(left)) {
+ yyerror("non-integer argument '%s'", left);
+ /* NOTREACHED */
+ }
+ if (!is_integer(right)) {
+ yyerror("non-integer argument '%s'", right);
+ /* NOTREACHED */
+ }
+
+ errno = 0;
+ l = strtoll(left, NULL, 10);
+ if (errno == ERANGE) {
+ yyerror("value '%s' is %s is %lld", left,
+ (l > 0) ? "too big, maximum" : "too small, minimum",
+ (l > 0) ? LLONG_MAX : LLONG_MIN);
+ /* NOTREACHED */
+ }
+
+ errno = 0;
+ r = strtoll(right, NULL, 10);
+ if (errno == ERANGE) {
+ yyerror("value '%s' is %s is %lld", right,
+ (l > 0) ? "too big, maximum" : "too small, minimum",
+ (l > 0) ? LLONG_MAX : LLONG_MIN);
+ /* NOTREACHED */
+ }
+
+ switch(op[0]) {
+ case '+':
+ /*
+ * Do the op into an unsigned to avoid overflow and then cast
+ * back to check the resulting signage.
+ */
+ temp = l + r;
+ res = (int64_t) temp;
+ /* very simplistic check for over-& underflow */
+ if ((res < 0 && l > 0 && r > 0)
+ || (res > 0 && l < 0 && r < 0))
+ yyerror("integer overflow or underflow occurred for "
+ "operation '%s %s %s'", left, op, right);
+ break;
+ case '-':
+ /*
+ * Do the op into an unsigned to avoid overflow and then cast
+ * back to check the resulting signage.
+ */
+ temp = l - r;
+ res = (int64_t) temp;
+ /* very simplistic check for over-& underflow */
+ if ((res < 0 && l > 0 && l > r)
+ || (res > 0 && l < 0 && l < r) )
+ yyerror("integer overflow or underflow occurred for "
+ "operation '%s %s %s'", left, op, right);
+ break;
+ case '/':
+ if (r == 0)
+ yyerror("second argument to '%s' must not be zero", op);
+ res = l / r;
+
+ break;
+ case '%':
+ if (r == 0)
+ yyerror("second argument to '%s' must not be zero", op);
+ res = l % r;
+ break;
+ case '*':
+ /* shortcut */
+ if ((l == 0) || (r == 0)) {
+ res = 0;
+ break;
+ }
+
+ sign = 1;
+ if (l < 0)
+ sign *= -1;
+ if (r < 0)
+ sign *= -1;
+
+ res = l * r;
+ /*
+ * XXX: not the most portable but works on anything with 2's
+ * complement arithmetic. If the signs don't match or the
+ * result was 0 on 2's complement this overflowed.
+ */
+ if ((res < 0 && sign > 0) || (res > 0 && sign < 0) ||
+ (res == 0))
+ yyerror("integer overflow or underflow occurred for "
+ "operation '%s %s %s'", left, op, right);
+ /* NOTREACHED */
+ break;
+ }
+ return res;
+}
+
+static const char *x = "|&=<>+-*/%:()";
+static const int x_token[] = {
+ SPEC_OR, SPEC_AND, COMPARE, COMPARE, COMPARE, ADD_SUB_OPERATOR,
+ ADD_SUB_OPERATOR, MUL_DIV_MOD_OPERATOR, MUL_DIV_MOD_OPERATOR,
+ MUL_DIV_MOD_OPERATOR, SPEC_REG, LEFT_PARENT, RIGHT_PARENT
+};
+
+static int handle_ddash = 1;
+
+int
+yylex(void)
+{
+ const char *p = *av++;
+ int retval;
+
+ if (!p)
+ retval = 0;
+ else if (p[1] == '\0') {
+ const char *w = strchr(x, p[0]);
+ if (w) {
+ retval = x_token[w-x];
+ } else {
+ retval = STRING;
+ }
+ } else if (p[1] == '=' && p[2] == '\0'
+ && (p[0] == '>' || p[0] == '<' || p[0] == '!'))
+ retval = COMPARE;
+ else if (handle_ddash && p[0] == '-' && p[1] == '-' && p[2] == '\0') {
+ /* ignore "--" if passed as first argument and isn't followed
+ * by another STRING */
+ retval = yylex();
+ if (retval != STRING && retval != LEFT_PARENT
+ && retval != RIGHT_PARENT) {
+ /* is not followed by string or parenthesis, use as
+ * STRING */
+ retval = STRING;
+ av--; /* was increased in call to yylex() above */
+ p = "--";
+ } else {
+ /* "--" is to be ignored */
+ p = yylval;
+ }
+ } else if (strcmp(p, "length") == 0)
+ retval = LENGTH;
+ else
+ retval = STRING;
+
+ handle_ddash = 0;
+ yylval = p;
+
+ return retval;
+}
+
+/*
+ * Print error message and exit with error 2 (syntax error).
+ */
+static __printflike(1, 2) void
+yyerror(const char *fmt, ...)
+{
+ va_list arg;
+
+ va_start(arg, fmt);
+ verrx(2, fmt, arg);
+ va_end(arg);
+}
+
+int
+main(int argc, const char * const *argv)
+{
+ setprogname(argv[0]);
+ (void)setlocale(LC_ALL, "");
+
+ if (argc == 1) {
+ (void)fprintf(stderr, "usage: %s expression\n",
+ getprogname());
+ exit(2);
+ }
+
+ av = argv + 1;
+
+ exit(yyparse());
+ /* NOTREACHED */
+}
cp.1 crc.1 crontab.1 dd.1 \
df.1 dhrystone.1 dosdir.1 dosread.1 doswrite.1 \
dumpcore.1 eject.1 \
- env.1 expand.1 expr.1 factor.1 \
+ env.1 expand.1 factor.1 \
finger.1 flexdoc.1 fold.1 format.1 fortune.1 \
fsck.mfs.1 head.1 host.1 hostaddr.1 ifdef.1 \
isodir.1 isoinfo.1 isoread.1 kill.1 \
MLINKS += cp.1 mv.1
MLINKS += cp.1 ln.1
MLINKS += cp.1 cpdir.1
-MLINKS += expr.1 test.1
-MLINKS += expr.1 [.1
MLINKS += svc.1 ci.1
MLINKS += svc.1 co.1
+++ /dev/null
-.TH EXPR 1
-.SH NAME \" Copyright (C) 1989 by Kenneth Almquist.
-expr, test, [ \- evaluate expressions
-.SH SYNOPSIS
-.B expr
-.I expression
-.br
-.B test
-.I expression
-.br
-.B [
-.I expression
-.B ]
-.SH DESCRIPTION
-.B Expr
-evaluates the expression and prints the result.
-.B Test
-evaluates the expression without printing the result.
-The ``[''
-command is a synonym for
-.BR test ;
-when invoked under this name
-the last argument to
-.B expr
-must be a ``]'', which is deleted and not considered part of the expression.
-.PP
-Three data types may occur in the
-.IR expression :
-string, integer, and boolean.
-The rules for conversion are as follows:
-.sp
-.nr i 2
-.ta \nii
-.in +\nii
-.ti -\nii
-\fIstring\fR\->\fIinteger\fR Done via
-.BR atoi (3).
-.ti -\nii
-\fIinteger\fR\->\fIstring\fR Convert to decimal representation.
-.ti -\nii
-\fIstring\fR\->\fIboolean\fR "" \-> false, everything else to true.
-.ti -\nii
-\fIboolean\fR\->\fIstring\fR false \-> "", true \-> "true".
-.ti -\nii
-\fIinteger\fR\->\fIboolean\fR 0 \-> false, everything else to true.
-.ti -\nii
-\fIboolean\fR\->\fIinteger\fR false \-> 0, true \-> 1.
-.in -\nii
-.PP
-Any argument to
-.B expr
-which is not a legal operator is treated as a string operand of type
-.BR string .
-.PP
-As a special case, if
-.I expression
-is omitted, the result is false.
-.PP
-We now list the operators. The syntax
-.sp
-.ti +8
-\fIinteger\fB op \fIinteger\fR \-> \fIboolean\fB (3)\fR
-.sp
-means that \fBop\fR is a binary operator which takes operands of type
-\fIinteger\fR and produces a result of type \fIboolean\fR.
-The ``(3)'' means that the priority of \fBop\fR is 3.
-Operands are automatically converted to the appropriate type. The type
-\fIany\fR is used for operator that take operands of any type.
-.nr p 1
-.de b
-.TP 0.5i
-\fI\\$1\fB \\$2 \fI\\$3\fR \-> \\fI\\$4\\fR (\\np)
-..
-.de u
-.TP 0.5i
-\\$1 \fI\\$2\fR \-> \\fI\\$3\\fR (\\np)
-..
-.b any \-o any any
-Returns the value of the left hand operand if the left hand operand
-would yield
-.B true
-if converted to type
-.BR boolean ,
-and the value of the right hand operand otherwise.
-The right hand operand is evaluated only if necessary.
-``|'' is a synonym for ``\-o''.
-.nr p \np+1
-.b any -a any any
-Returns the value of the left hand operand if the left hand operand
-would yield
-.B false
-if converted to type
-.BR boolean ,
-and the value of the right hand operand otherwise.
-The right hand operand is evaluated only if necessary.
-``&'' is a synonym for ``\-a''.
-.nr p \np+1
-.u ! boolean boolean
-Returns true if the operand is false, and false if the operand is true.
-.nr p \np+1
-.b string = string boolean
-True if the two strings are equal.
-.b string != string boolean
-True if the two strings are not equal.
-.b integer \-eq integer boolean
-True if the two operands are equal.
-.b integer \-ne integer boolean
-True if the two operands are not equal.
-.b integer \-gt integer boolean
-True if the first operand is greater than the second one.
-.b integer \-lt integer boolean
-True if the first operand is less than the second one.
-.b integer \-ge integer boolean
-True if the first operand is greater than or equal to the second one.
-.b integer \-le integer boolean
-True if the first operand is less than or equal to the second one.
-.nr p \np+1
-.b integer + integer integer
-Add two integers.
-.b integer \- integer integer
-Subtract two integers.
-.nr p \np+1
-.b integer * integer integer
-Multiply two integers. ``*'' is special to the shell, so you generally
-have to write this operator as ``\e*''.
-.b integer / integer integer
-Divide two integers.
-.b integer % integer integer
-Returns the remainder when the first operand is divided by the second one.
-.nr p \np+1
-.b string : string "integer or string"
-The second operand is interpreted as a regular expression (as in the
-System V
-.B ed
-program).
-This operator attempts to match part (or all) of the first operand
-with the regular expression. The match must start at the beginning of
-the first operand.
-If the regular expression contains \e( \e) pairs, then the result
-of this operator is the string which is matched by the regular expression
-between these pairs, or the null string if no match occurred. Otherwise,
-the result is the number of characters matched by the regular expression,
-or zero if no no match occurred.
-.nr p \np+1
-.u \-n string integer
-Returns the number of characters in the string.
-.u \-z string boolean
-Returns true if the string contains zero characters.
-.u \-t integer boolean
-Returns true if the specified file descriptor is associated with a tty.
-.PP
-The remaining operators all deal with files. Except as noted, they return
-false if the
-specified file does not exist. The ones dealing with permission use
-the effective user and group ids of the shell.
-.u \-e string boolean
-True the file exists.
-.u \-r string boolean
-True if you have read permission on the file.
-.u \-w string boolean
-True if you have write permission on the file.
-.u \-x string boolean
-True if you have execute permission on the file.
-.u \-f string boolean
-True if the file is a regular file.
-.u \-d string boolean
-True if the file is a directory.
-.u \-c string boolean
-True if the file is a character special file.
-.u \-b string boolean
-True if the file is a block special file.
-.u \-p string boolean
-True if the file is a named pipe (i.e. a fifo).
-.u \-u string boolean
-True if the file is setuid.
-.u \-g string boolean
-True if the file is setgid.
-.u \-k string boolean
-True if the file has the sticky bit set.
-.u \-s string "integer or boolean"
-Returns the size of the file, or 0 if the file does not exist.
-.u \-h string boolean
-True if the file is a symlink. This is the only file test operator that
-does not follow symlinks, all others do. So ``\-d'' and ``\-h''
-are both true on a symlink pointing to a directory.
-``\-L'' is a synonym for ``\-h''.
-.SH "EXIT CODE"
-0 if the result of
-.I expression
-would be
-.B true
-if the result were converted to
-.BR boolean .
-.br
-1 if the result of
-.I expression
-would be
-.B false
-if the result were converted to
-.BR boolean .
-.br
-2 if
-.I expression
-is syntactically incorrect.
-.SH EXAMPLES
-.TP 0.5i
-filesize=`expr \-s file`
-Sets the shell variable
-.I filesize
-to the size of
-.IR file .
-.TP 0.5i
-if [ \-s file ]; then command; fi
-Execute
-.I command
-if
-.I file
-exists and is not empty.
-.TP 0.5i
-x=`expr "$x" : '.\\{4\\}\\(.\\{0,3\\}\\)'`
-Sets
-.I x
-to the substring of
-.I x
-beginning after the fourth character of
-.I x
-and continuing for three characters or until the end of the string,
-whichever comes first.
-.TP 0.5i
-x=`expr X"$x" : X'.\\{4\\}\\(.\\{0,3\\}\\)'`
-This example is the same as the previous one, but it uses a leading
-``X'' to make things work when the value of
-.I x
-looks like an operator.
-.SH BUGS
-The relational operators of the System V
-.B expr
-command are not implemented.
-.PP
-Certain features of this version of
-.B expr
-are not present in System V, so care should be used when writing
-portable code.
-.SH COPYRIGHT
-Kenneth Almquist.
2011/08/27 12:55:09,bin/date
2012/10/17 12:00:00,bin/echo
2012/01/16 18:47:57,bin/ed
+2012/10/17 12:00:00,bin/expr
2012/10/17 12:00:00,bin/Makefile
2012/10/17 12:00:00,bin/Makefile.inc
2008/07/20 00:52:40,bin/mkdir