F103HAL-compile link debug

diff --git a/.gitignore b/.gitignore
index bb191ae90a5fa1413cb4dcb20108e8d173b1200a..31f18ebb85a4fc68412703ce05c5de89382f7935 100644 (file)
--- a/.gitignore
+++ b/.gitignore
@@ -12,3 +12,5 @@ ish
 *.log
 dvwa
 build
+Debug
+OneNetMiniBoard

diff --git a/learn/stm32/F103HAL/F103HAL.elf.cfg b/learn/stm32/F103HAL/F103HAL.elf.cfg
new file mode 100644 (file)
index 0000000..f59aa59
--- /dev/null
+++ b/learn/stm32/F103HAL/F103HAL.elf.cfg
@@ -0,0 +1,30 @@
+# This is an genericBoard board with a single STM32F103C8Tx chip
+#
+# Generated by STM32CubeIDE
+# Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s)
+
+source [find interface/stlink.cfg] 
+
+set WORKAREASIZE 0x8000
+
+transport select "hla_swd"
+
+set CHIPNAME STM32F103C8Tx
+set BOARDNAME genericBoard
+
+# Enable debug when in low power modes
+set ENABLE_LOW_POWER 1
+
+# Stop Watchdog counters when halt
+set STOP_WATCHDOG 1
+
+# STlink Debug clock frequency
+set CLOCK_FREQ 4000
+
+# use software system reset
+reset_config none
+set CONNECT_UNDER_RESET 0
+
+# BCTM CPU variables
+
+source [find target/stm32f1x.cfg]

diff --git a/learn/stm32/F103HAL/F103HAL.elf.launch b/learn/stm32/F103HAL/F103HAL.elf.launch
new file mode 100644 (file)
index 0000000..925476b
--- /dev/null
+++ b/learn/stm32/F103HAL/F103HAL.elf.launch
@@ -0,0 +1,69 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="com.st.stm32cube.ide.mcu.debug.launch.launchConfigurationType">
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_swv" value="false"/>
+<intAttribute key="com.st.stm32cube.ide.mcu.debug.launch.formatVersion" value="2"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.remoteCommand" value="target remote"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startServer" value="true"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swd_mode" value="true"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_port" value="61235"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_div" value="8"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_hclk" value="16000000"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.useRemoteTarget" value="true"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_DEVICE_SHAREABLE_ALLOWED" value="false"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_INTERFACE" value="Swd"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_INTERFACE_FREQUENCY" value="4000000.0"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_LOW_POWER_MODE_ALLOWED" value="true"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_RESET_MODE" value="soft"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.DBG_STOP_WATCHDOG_THEN_HALTED_ALLOWED" value="true"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.OPENOCD_GENERATOR_OPTION" value="true"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.OPENOCD_NAME" value="&quot;${stm32cubeide_openocd_path}/openocd&quot;"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.OPENOCD_OTHER_OPTIONS" value=""/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.OPENOCD_SCRIPT" value="${ProjDirPath}/F103HAL.elf.cfg"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.openocd.OPENOCD_SCRIPT_CHOICE" value="automated"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_external_loader" value="false"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_logging" value="false"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_shared_stlink" value="false"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.external_loader" value=""/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.log_file" value="/Users/ace/workspace/acecode/learn/stm32/F103HAL/Debug/st-link_gdbserver_log.txt"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_ap_id" value="0"/>
+<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_check_serial_number" value="false"/>
+<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_txt_serial_number" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="false"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="ST-LINK (OpenOCD)"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="${TOOLCHAIN_PATH}/arm-none-eabi-gdb"/>
+<booleanAttribute key="org.eclipse.cdt.dsf.gdb.NON_STOP" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="remote"/>
+<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/F103HAL.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="F103HAL"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value=""/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/F103HAL"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<stringAttribute key="process_factory_id" value="org.eclipse.cdt.dsf.gdb.GdbProcessFactory"/>
+</launchConfiguration>