--- /dev/null
+https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5-3rd-party-Hardware-specification
--- /dev/null
+# See: http://code.google.com/p/arduino/wiki/Platforms
+
+menu.cpu=Processor
+
+##############################################################
+
+uno.name=Ace Arduino Uno
+
+uno.vid.0=0x2341
+uno.pid.0=0x0043
+uno.vid.1=0x2341
+uno.pid.1=0x0001
+uno.vid.2=0x2A03
+uno.pid.2=0x0043
+uno.vid.3=0x2341
+uno.pid.3=0x0243
+
+uno.upload.tool=avrdude
+uno.upload.protocol=arduino
+uno.upload.maximum_size=32256
+uno.upload.maximum_data_size=2048
+uno.upload.speed=115200
+
+uno.bootloader.tool=avrdude
+uno.bootloader.low_fuses=0xFF
+uno.bootloader.high_fuses=0xDE
+uno.bootloader.extended_fuses=0xFD
+uno.bootloader.unlock_bits=0x3F
+uno.bootloader.lock_bits=0x0F
+uno.bootloader.file=optiboot/optiboot_atmega328.hex
+
+uno.build.mcu=atmega328p
+uno.build.f_cpu=16000000L
+uno.build.board=AVR_UNO
+uno.build.core=avr
+uno.build.variant=avr
--- /dev/null
+/*
+ * ------------------------------------------------------------------------
+ * File Name: AceAvr.h
+ * Author: Zhao Yanbai
+ * 2018-06-14 20:28:08 Thursday CST
+ * Description: none
+ * ------------------------------------------------------------------------
+ */
+
+#pragma once
+
+
+void acevest();
--- /dev/null
+/*
+ * ------------------------------------------------------------------------
+ * File Name: Arduino.h
+ * Author: Zhao Yanbai
+ * 2018-06-14 20:01:07 Thursday CST
+ * Description: none
+ * ------------------------------------------------------------------------
+ */
+
+#pragma once
+
+void setup(void);
+void loop(void);
+
+
+#include <AceAvr.h>
--- /dev/null
+/*
+ * ------------------------------------------------------------------------
+ * File Name: acevest.cpp
+ * Author: Zhao Yanbai
+ * 2018-06-14 20:27:23 Thursday CST
+ * Description: none
+ * ------------------------------------------------------------------------
+ */
+void acevest() {
+
+
+}
--- /dev/null
+/*
+ * ------------------------------------------------------------------------
+ * File Name: main.cpp
+ * Author: Zhao Yanbai
+ * 2018-06-14 20:21:33 Thursday CST
+ * Description: none
+ * ------------------------------------------------------------------------
+ */
+#include <Arduino.h>
+int main()
+{
+ setup();
+ for(;;) {
+ loop();
+ }
+ return 0;
+}
--- /dev/null
+
+# Arduino AVR Core and platform.
+# ------------------------------
+#
+# For more info:
+# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5-3rd-party-Hardware-specification
+
+name=Ace Arduino AVR Boards
+version=1.6.21
+
+# AVR compile variables
+# ---------------------
+
+compiler.warning_flags=-w
+compiler.warning_flags.none=-w
+compiler.warning_flags.default=
+compiler.warning_flags.more=-Wall
+compiler.warning_flags.all=-Wall -Wextra
+
+# Default "compiler.path" is correct, change only if you want to override the initial value
+compiler.path={runtime.tools.avr-gcc.path}/bin/
+compiler.c.cmd=avr-gcc
+compiler.c.flags=-c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects
+compiler.c.elf.flags={compiler.warning_flags} -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections
+compiler.c.elf.cmd=avr-gcc
+compiler.S.flags=-c -g -x assembler-with-cpp -flto -MMD
+compiler.cpp.cmd=avr-g++
+compiler.cpp.flags=-c -g -Os {compiler.warning_flags} -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto
+compiler.ar.cmd=avr-gcc-ar
+compiler.ar.flags=rcs
+compiler.objcopy.cmd=avr-objcopy
+compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
+compiler.elf2hex.flags=-O ihex -R .eeprom
+compiler.elf2hex.cmd=avr-objcopy
+compiler.ldflags=
+compiler.size.cmd=avr-size
+
+# This can be overridden in boards.txt
+build.extra_flags=
+
+# These can be overridden in platform.local.txt
+compiler.c.extra_flags=
+compiler.c.elf.extra_flags=
+compiler.S.extra_flags=
+compiler.cpp.extra_flags=
+compiler.ar.extra_flags=
+compiler.objcopy.eep.extra_flags=
+compiler.elf2hex.extra_flags=
+
+# AVR compile patterns
+# --------------------
+
+## Compile c files
+recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {includes} "{source_file}" -o "{object_file}"
+
+## Compile c++ files
+recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {includes} "{source_file}" -o "{object_file}"
+
+## Compile S files
+recipe.S.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.S.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {includes} "{source_file}" -o "{object_file}"
+
+## Create archives
+# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
+archive_file_path={build.path}/{archive_file}
+recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
+
+## Combine gc-sections, archives, and objects
+recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" {compiler.c.elf.flags} -mmcu={build.mcu} {compiler.c.elf.extra_flags} -o "{build.path}/{build.project_name}.elf" {object_files} "{build.path}/{archive_file}" "-L{build.path}" -lm
+
+## Create output files (.eep and .hex)
+recipe.objcopy.eep.pattern="{compiler.path}{compiler.objcopy.cmd}" {compiler.objcopy.eep.flags} {compiler.objcopy.eep.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.eep"
+recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
+
+## Save hex
+recipe.output.tmp_file={build.project_name}.hex
+recipe.output.save_file={build.project_name}.{build.variant}.hex
+
+## Compute size
+recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
+recipe.size.regex=^(?:\.text|\.data|\.bootloader)\s+([0-9]+).*
+recipe.size.regex.data=^(?:\.data|\.bss|\.noinit)\s+([0-9]+).*
+recipe.size.regex.eeprom=^(?:\.eeprom)\s+([0-9]+).*
+
+## Preprocessor
+preproc.includes.flags=-w -x c++ -M -MG -MP
+recipe.preproc.includes="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} {preproc.includes.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {includes} "{source_file}"
+
+preproc.macros.flags=-w -x c++ -E -CC
+recipe.preproc.macros="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} {preproc.macros.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {includes} "{source_file}" -o "{preprocessed_file_path}"
+
+# AVR Uploader/Programmers tools
+# ------------------------------
+
+tools.avrdude.path={runtime.tools.avrdude.path}
+tools.avrdude.cmd.path={path}/bin/avrdude
+tools.avrdude.config.path={path}/etc/avrdude.conf
+
+tools.avrdude.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+
+tools.avrdude.upload.params.verbose=-v
+tools.avrdude.upload.params.quiet=-q -q
+# tools.avrdude.upload.verify is needed for backwards compatibility with IDE 1.6.8 or older, IDE 1.6.9 or newer overrides this value
+tools.avrdude.upload.verify=
+tools.avrdude.upload.params.noverify=-V
+tools.avrdude.upload.pattern="{cmd.path}" "-C{config.path}" {upload.verbose} {upload.verify} -p{build.mcu} -c{upload.protocol} "-P{serial.port}" -b{upload.speed} -D "-Uflash:w:{build.path}/{build.project_name}.hex:i"
+
+tools.avrdude.program.params.verbose=-v
+tools.avrdude.program.params.quiet=-q -q
+# tools.avrdude.program.verify is needed for backwards compatibility with IDE 1.6.8 or older, IDE 1.6.9 or newer overrides this value
+tools.avrdude.program.verify=
+tools.avrdude.program.params.noverify=-V
+tools.avrdude.program.pattern="{cmd.path}" "-C{config.path}" {program.verbose} {program.verify} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{build.path}/{build.project_name}.hex:i"
+
+tools.avrdude.erase.params.verbose=-v
+tools.avrdude.erase.params.quiet=-q -q
+tools.avrdude.erase.pattern="{cmd.path}" "-C{config.path}" {erase.verbose} -p{build.mcu} -c{protocol} {program.extra_params} -e -Ulock:w:{bootloader.unlock_bits}:m -Uefuse:w:{bootloader.extended_fuses}:m -Uhfuse:w:{bootloader.high_fuses}:m -Ulfuse:w:{bootloader.low_fuses}:m
+
+tools.avrdude.bootloader.params.verbose=-v
+tools.avrdude.bootloader.params.quiet=-q -q
+tools.avrdude.bootloader.pattern="{cmd.path}" "-C{config.path}" {bootloader.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{runtime.platform.path}/bootloaders/{bootloader.file}:i" -Ulock:w:{bootloader.lock_bits}:m
+
+tools.avrdude_remote.upload.pattern=/usr/bin/run-avrdude /tmp/sketch.hex {upload.verbose} -p{build.mcu}
+
+tools.avrdude.upload.network_pattern="{network_cmd}" -address {serial.port} -port {upload.network.port} -sketch "{build.path}/{build.project_name}.hex" -upload {upload.network.endpoint_upload} -sync {upload.network.endpoint_sync} -reset {upload.network.endpoint_reset} -sync_exp {upload.network.sync_return}
+
+# USB Default Flags
+# Default blank usb manufacturer will be filled in at compile time
+# - from numeric vendor ID, set to Unknown otherwise
+build.usb_manufacturer="Unknown"
+build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
--- /dev/null
+avrisp.name=AVR ISP
+avrisp.communication=serial
+avrisp.protocol=stk500v1
+avrisp.program.protocol=stk500v1
+avrisp.program.tool=avrdude
+avrisp.program.extra_params=-P{serial.port}
+
+avrispmkii.name=AVRISP mkII
+avrispmkii.communication=usb
+avrispmkii.protocol=stk500v2
+avrispmkii.program.protocol=stk500v2
+avrispmkii.program.tool=avrdude
+avrispmkii.program.extra_params=-Pusb
+
+usbtinyisp.name=USBtinyISP
+usbtinyisp.protocol=usbtiny
+usbtinyisp.program.tool=avrdude
+usbtinyisp.program.extra_params=
+
+arduinoisp.name=ArduinoISP
+arduinoisp.protocol=arduinoisp
+arduinoisp.program.tool=avrdude
+arduinoisp.program.extra_params=
+
+arduinoisporg.name=ArduinoISP.org
+arduinoisporg.protocol=arduinoisporg
+arduinoisporg.program.tool=avrdude
+arduinoisporg.program.extra_params=
+
+usbasp.name=USBasp
+usbasp.communication=usb
+usbasp.protocol=usbasp
+usbasp.program.protocol=usbasp
+usbasp.program.tool=avrdude
+usbasp.program.extra_params=-Pusb
+
+parallel.name=Parallel Programmer
+parallel.protocol=dapa
+parallel.force=true
+# parallel.delay=200
+parallel.program.tool=avrdude
+parallel.program.extra_params=-F
+
+arduinoasisp.name=Arduino as ISP
+arduinoasisp.communication=serial
+arduinoasisp.protocol=stk500v1
+arduinoasisp.speed=19200
+arduinoasisp.program.protocol=stk500v1
+arduinoasisp.program.speed=19200
+arduinoasisp.program.tool=avrdude
+arduinoasisp.program.extra_params=-P{serial.port} -b{program.speed}
+
+usbGemma.name=Arduino Gemma
+usbGemma.protocol=arduinogemma
+usbGemma.program.tool=avrdude
+usbGemma.program.extra_params=
+usbGemma.config.path={runtime.platform.path}/bootloaders/gemma/avrdude.conf
+
+## Notes about Dangerous Prototypes Bus Pirate as ISP
+## Bus Pirate V3 need Firmware v5.10 or later
+## Bus Pirate V4 need Firmware v6.3-r2151 or later
+## Could happen that BP does not have enough current to power an Arduino board
+## through the ICSP connector. In this case disconnect the +Vcc from ICSP connector
+## and power Arduino board in the normal way.
+buspirate.name=BusPirate as ISP
+buspirate.communication=serial
+buspirate.protocol=buspirate
+buspirate.program.protocol=buspirate
+buspirate.program.tool=avrdude
+buspirate.program.extra_params=-P{serial.port}
+
+# STK500 firmware version v1 and v2 use different serial protocols.
+# Using the 'stk500' protocol tells avrdude to try and autodetect the
+# firmware version. If this leads to problems, we might need to add
+# stk500v1 and stk500v2 entries to allow explicitely selecting the
+# firmware version.
+stk500.name=Atmel STK500 development board
+stk500.communication=serial
+stk500.protocol=stk500
+stk500.program.protocol=stk500
+stk500.program.tool=avrdude
+stk500.program.extra_params=-P{serial.port}
+
+jtag3isp.name=Atmel JTAGICE3 (ISP mode)
+jtag3isp.communication=usb
+jtag3isp.protocol=jtag3isp
+jtag3isp.program.protocol=jtag3isp
+jtag3isp.program.tool=avrdude
+jtag3isp.program.extra_params=
+
+jtag3.name=Atmel JTAGICE3 (JTAG mode)
+jtag3.communication=usb
+jtag3.protocol=jtag3
+jtag3.program.protocol=jtag3
+jtag3.program.tool=avrdude
+# Set a bitclock of 0.1us (the fastest supported value). This should
+# work regardless of the crystal used, since JTAG doesn't use the MCU
+# clock but dictates its own clock.
+jtag3.program.extra_params=-B0.1
+
+atmel_ice.name=Atmel-ICE (AVR)
+atmel_ice.communication=usb
+atmel_ice.protocol=atmelice_isp
+atmel_ice.program.protocol=atmelice_isp
+atmel_ice.program.tool=avrdude
+atmel_ice.program.extra_params=-Pusb