From: Ben Gras Date: Tue, 20 Jun 2006 08:38:15 +0000 (+0000) Subject: . introduced DEV_READ_S, DEV_WRITE_S, DEV_SCATTER_S, DEV_GATHER_S X-Git-Tag: v3.1.3~340 X-Git-Url: http://zhaoyanbai.com/repos/%22http:/www.isc.org/icons/addsub.png?a=commitdiff_plain;h=aaca17c36d503392d671a3276778446a6f89b599;p=minix.git . introduced DEV_READ_S, DEV_WRITE_S, DEV_SCATTER_S, DEV_GATHER_S and DEV_IOCTL_S as replacements for DEV_READ, DEV_WRITE, DEV_SCATTER, DEV_GATHER and DEV_IOCTL. Instead of a direct address, the *_S commands pass 'grant ids' to the drivers which are referenced through a new set of copy calls (sys_safecopyfrom and sys_safecopyto). in order for this copy to succeed, the grant must have previously been created in the address space of the granter. . bitmap manipulation functions moved to . HIGHPOS introduced as field containing high 32 bits of position in device I/O message; TTY_FLAGS no longer used . IO_GRANT field introduced for GRANTs, to replace ADDRESS . REP_IO_GRANT field for un-SUSPEND messages introduced to indicate grant for which I/O was done to disambiguate messages . SYS_SAFECOPYFROM and SYS_SAFECOPYTO introduced as new calls . SYS_PRIV_SET_GRANTS code introduced as a code to set the address and size of the grant table in a process' own address space . 'type' and 'direction' field of _ins* and _outs* I/O functions are merged into one by ORing _DIO_INPUT/_DIO_OUTPUT and _DIO_BYTE/_DIO_WORD etc. This allows for an additional parameter, _DIO_SAFE, which indicates the address in another address space isn't actually an address, but a grant id. Also needs an offset, for which fields had to be merged. . SCP_* are field names for SYS_SAFECOPY* functions . DIAGNOSTICS and GET_KMESS moved to their own range above DIAG_BASE, added DIAGNOSTICS_S which is a grant-based variant of DIAGNOSTICS . removed obsolete BINCOMPAT and SRCCOMPAT options . added GRANT_SEG type for use in vircopy - allows copying to a grant id (without offset) . added _MINIX_IOCTL_* macros that decode information encoded by _IO* macros in ioctl codes, used to check which grants are necessary for an ioctl . introduced the type endpoint_t for process endpoints, changed some prototypes and struct field types to match . renamed protected to prot for g++ --- diff --git a/include/minix/bitmap.h b/include/minix/bitmap.h index 47da1283f..f4858eb38 100644 --- a/include/minix/bitmap.h +++ b/include/minix/bitmap.h @@ -8,4 +8,13 @@ #define bit_empty(mask) ((mask) = 0) #define bit_fill(mask) ((mask) = ~0) +/* Definitions previously in kernel/const.h */ +#define BITCHUNK_BITS (sizeof(bitchunk_t) * CHAR_BIT) +#define BITMAP_CHUNKS(nr_bits) (((nr_bits)+BITCHUNK_BITS-1)/BITCHUNK_BITS) +#define MAP_CHUNK(map,bit) (map)[((bit)/BITCHUNK_BITS)] +#define CHUNK_OFFSET(bit) ((bit)%BITCHUNK_BITS)) +#define GET_BIT(map,bit) ( MAP_CHUNK(map,bit) & (1 << CHUNK_OFFSET(bit) ) +#define SET_BIT(map,bit) ( MAP_CHUNK(map,bit) |= (1 << CHUNK_OFFSET(bit) ) +#define UNSET_BIT(map,bit) ( MAP_CHUNK(map,bit) &= ~(1 << CHUNK_OFFSET(bit) ) + #endif /* _BITMAP_H */ diff --git a/include/minix/com.h b/include/minix/com.h index e9e8c958e..21029691c 100755 --- a/include/minix/com.h +++ b/include/minix/com.h @@ -145,6 +145,12 @@ #define DEV_SELECT (DEV_RQ_BASE + 12) /* request select() attention */ #define DEV_STATUS (DEV_RQ_BASE + 13) /* request driver status */ +#define DEV_READ_S (DEV_RQ_BASE + 20) /* (safecopy) read from minor */ +#define DEV_WRITE_S (DEV_RQ_BASE + 21) /* (safecopy) write to minor */ +#define DEV_SCATTER_S (DEV_RQ_BASE + 22) /* (safecopy) write from a vector */ +#define DEV_GATHER_S (DEV_RQ_BASE + 23) /* (safecopy) read into a vector */ +#define DEV_IOCTL_S (DEV_RQ_BASE + 24) /* (safecopy) I/O control code */ + #define DEV_REPLY (DEV_RS_BASE + 0) /* general task reply */ #define DEV_CLONED (DEV_RS_BASE + 1) /* return cloned minor */ #define DEV_REVIVE (DEV_RS_BASE + 2) /* driver revives process */ @@ -155,9 +161,11 @@ #define DEVICE m2_i1 /* major-minor device */ #define IO_ENDPT m2_i2 /* which (proc/endpoint) wants I/O? */ #define COUNT m2_i3 /* how many bytes to transfer */ -#define REQUEST m2_i3 /* ioctl request code */ -#define POSITION m2_l1 /* file offset */ +#define REQUEST m2_i3 /* ioctl request code */ +#define POSITION m2_l1 /* file offset (low 4 bytes) */ +#define HIGHPOS m2_l2 /* file offset (high 4 bytes) */ #define ADDRESS m2_p1 /* core buffer address */ +#define IO_GRANT m2_p1 /* grant id (for DEV_*_S variants) */ /* Field names for DEV_SELECT messages to device drivers. */ #define DEV_MINOR m2_i1 /* minor device */ @@ -167,13 +175,13 @@ /* Field names used in reply messages from tasks. */ #define REP_ENDPT m2_i1 /* # of proc on whose behalf I/O was done */ #define REP_STATUS m2_i2 /* bytes transferred or error number */ +#define REP_IO_GRANT m2_i3 /* DEV_REVIVE: grant by which I/O was done */ # define SUSPEND -998 /* status to suspend caller, reply later */ /* Field names for messages to TTY driver. */ #define TTY_LINE DEVICE /* message parameter: terminal line */ #define TTY_REQUEST COUNT /* message parameter: ioctl request code */ #define TTY_SPEK POSITION/* message parameter: ioctl speed, erasing */ -#define TTY_FLAGS m2_l2 /* message parameter: ioctl tty mode */ #define TTY_PGRP m2_i3 /* message parameter: process group */ /* Field names for the QIC 02 status reply from tape driver */ @@ -278,8 +286,13 @@ # define SYS_IOPENABLE (KERNEL_CALL + 28) /* sys_enable_iop() */ # define SYS_VM_SETBUF (KERNEL_CALL + 29) /* sys_vm_setbuf() */ # define SYS_VM_MAP (KERNEL_CALL + 30) /* sys_vm_map() */ +# define SYS_SAFECOPYFROM (KERNEL_CALL + 31) /* sys_safecopyfrom() */ +# define SYS_SAFECOPYTO (KERNEL_CALL + 32) /* sys_safecopyto() */ + +#define NR_SYS_CALLS 33 /* number of system calls */ -#define NR_SYS_CALLS 31 /* number of system calls */ +/* Pseudo call for use in kernel/table.c. */ +#define SYS_ALL_CALLS (NR_SYS_CALLS) /* Subfunctions for SYS_PRIVCTL */ #define SYS_PRIV_INIT 1 /* Initialize a privilege structure */ @@ -287,6 +300,7 @@ #define SYS_PRIV_ADD_MEM 3 /* Add memory range (struct mem_range) */ #define SYS_PRIV_ADD_IRQ 4 /* Add IRQ */ +#define SYS_PRIV_SET_GRANTS 5 /* Set grant table */ /* Field names for SYS_MEMSET, SYS_SEGCTL. */ #define MEM_PTR m2_p1 /* base */ @@ -299,17 +313,29 @@ /* Field names for SYS_DEVIO, SYS_VDEVIO, SYS_SDEVIO. */ #define DIO_REQUEST m2_i3 /* device in or output */ -# define DIO_INPUT 0 /* input */ -# define DIO_OUTPUT 1 /* output */ -#define DIO_TYPE m2_i1 /* flag indicating byte, word, or long */ -# define DIO_BYTE 'b' /* byte type values */ -# define DIO_WORD 'w' /* word type values */ -# define DIO_LONG 'l' /* long type values */ +# define _DIO_INPUT 0x001 +# define _DIO_OUTPUT 0x002 +# define _DIO_DIRMASK 0x00f +# define _DIO_BYTE 0x010 +# define _DIO_WORD 0x020 +# define _DIO_LONG 0x030 +# define _DIO_TYPEMASK 0x0f0 +# define _DIO_SAFE 0x100 +# define _DIO_SAFEMASK 0xf00 +# define DIO_INPUT_BYTE (_DIO_INPUT|_DIO_BYTE) +# define DIO_INPUT_WORD (_DIO_INPUT|_DIO_WORD) +# define DIO_OUTPUT_BYTE (_DIO_OUTPUT|_DIO_BYTE) +# define DIO_OUTPUT_WORD (_DIO_OUTPUT|_DIO_WORD) +# define DIO_SAFE_INPUT_BYTE (_DIO_INPUT|_DIO_BYTE|_DIO_SAFE) +# define DIO_SAFE_INPUT_WORD (_DIO_INPUT|_DIO_WORD|_DIO_SAFE) +# define DIO_SAFE_OUTPUT_BYTE (_DIO_OUTPUT|_DIO_BYTE|_DIO_SAFE) +# define DIO_SAFE_OUTPUT_WORD (_DIO_OUTPUT|_DIO_WORD|_DIO_SAFE) #define DIO_PORT m2_l1 /* single port address */ #define DIO_VALUE m2_l2 /* single I/O value */ #define DIO_VEC_ADDR m2_p1 /* address of buffer or (p,v)-pairs */ #define DIO_VEC_SIZE m2_l2 /* number of elements in vector */ #define DIO_VEC_ENDPT m2_i2 /* number of process where vector is */ +#define DIO_OFFSET m2_i1 /* offset from grant */ /* Field names for SYS_SIGNARLM, SYS_FLAGARLM, SYS_SYNCALRM. */ #define ALRM_EXP_TIME m2_l1 /* expire time for the alarm call */ @@ -446,6 +472,18 @@ /* Field names for SYS_INT86 */ #define INT86_REG86 m1_p1 /* pointer to registers */ +/* Field names for SYS_SAFECOPY */ +#define SCP_FROM_TO m2_i1 /* from/to whom? */ +#define SCP_INFO m2_i2 /* byte: DDDDSSSS Dest and Src seg */ +#define SCP_GID m2_i3 /* grant id */ +#define SCP_OFFSET m2_l1 /* offset within grant */ +#define SCP_ADDRESS m2_p1 /* my own address */ +#define SCP_BYTES m2_l2 /* bytes from offset */ + +/* For the SCP_INFO field: encoding and decoding. */ +#define SCP_MAKEINFO(seg) ((seg) & 0xffff) +#define SCP_INFO2SEG(info) ((info) & 0xffff) + /* Field names for SELECT (FS). */ #define SEL_NFDS m8_i1 #define SEL_READFDS m8_p1 @@ -502,11 +540,12 @@ # define FKEY_EVENTS 12 /* request open key presses */ # define FKEY_FKEYS m2_l1 /* F1-F12 keys pressed */ # define FKEY_SFKEYS m2_l2 /* Shift-F1-F12 keys pressed */ -#define DIAGNOSTICS 100 /* output a string without FS in between */ -# define DIAG_PRINT_BUF m1_p1 +#define DIAG_BASE 0xa00 +#define DIAGNOSTICS (DIAG_BASE+1) /* output a string without FS in between */ +#define DIAGNOSTICS_S (DIAG_BASE+2) /* grant-based version of DIAGNOSTICS */ +# define DIAG_PRINT_BUF_G m1_p1 # define DIAG_BUF_COUNT m1_i1 -# define DIAG_ENDPT m1_i2 -#define GET_KMESS 101 /* get kmess from TTY */ +#define GET_KMESS (DIAG_BASE+3) /* get kmess from TTY */ # define GETKM_PTR m1_p1 #define PM_BASE 0x900 diff --git a/include/minix/config.h b/include/minix/config.h index 841e6fc44..9785975fd 100755 --- a/include/minix/config.h +++ b/include/minix/config.h @@ -81,10 +81,6 @@ /* DMA_SECTORS may be increased to speed up DMA based drivers. */ #define DMA_SECTORS 1 /* DMA buffer size (must be >= 1) */ -/* Include or exclude backwards compatibility code. */ -#define ENABLE_BINCOMPAT 0 /* for binaries using obsolete calls */ -#define ENABLE_SRCCOMPAT 0 /* for sources using obsolete calls */ - /* Which processes should receive diagnostics from the kernel and system? * Directly sending it to TTY only displays the output. Sending it to the * log driver will cause the diagnostics to be buffered and displayed. diff --git a/include/minix/const.h b/include/minix/const.h index a3cd8c48d..bc31f82eb 100755 --- a/include/minix/const.h +++ b/include/minix/const.h @@ -43,6 +43,8 @@ #define PHYS_SEG 0x0400 /* flag indicating entire physical memory */ +#define GRANT_SEG 0x0800 /* flag indicating grant for umap */ + /* Labels used to disable code sections for different reasons. */ #define DEAD_CODE 0 /* unused code in normal configuration */ #define FUTURE_CODE 0 /* new code to be activated + tested later */ diff --git a/include/minix/ioctl.h b/include/minix/ioctl.h index 13ea29de4..88113039f 100755 --- a/include/minix/ioctl.h +++ b/include/minix/ioctl.h @@ -30,6 +30,13 @@ _IOC_IN) #define _IORW(x,y,t) ((x << 8) | y | ((sizeof(t) & _IOCPARM_MASK) << 16) |\ _IOC_INOUT) + +/* Decode an ioctl call. */ +#define _MINIX_IOCTL_SIZE(i) (((i) >> 16) & _IOCPARM_MASK) +#define _MINIX_IOCTL_IOR(i) ((i) & _IOC_OUT) +#define _MINIX_IOCTL_IORW(i) ((i) & _IOC_INOUT) +#define _MINIX_IOCTL_IOW(i) ((i) & _IOC_IN) + #else /* No fancy encoding on a 16-bit machine. */ diff --git a/include/minix/ipc.h b/include/minix/ipc.h index db03435df..4d7c0a568 100644 --- a/include/minix/ipc.h +++ b/include/minix/ipc.h @@ -19,7 +19,7 @@ typedef struct {int m7i1, m7i2, m7i3, m7i4; char *m7p1, *m7p2;} mess_7; typedef struct {int m8i1, m8i2; char *m8p1, *m8p2, *m8p3, *m8p4;} mess_8; typedef struct { - int m_source; /* who sent the message */ + endpoint_t m_source; /* who sent the message */ int m_type; /* what kind of message is it */ union { mess_1 m_m1; @@ -92,10 +92,10 @@ typedef struct { #define send _send _PROTOTYPE( int echo, (message *m_ptr) ); -_PROTOTYPE( int notify, (int dest) ); -_PROTOTYPE( int sendrec, (int src_dest, message *m_ptr) ); -_PROTOTYPE( int receive, (int src, message *m_ptr) ); -_PROTOTYPE( int send, (int dest, message *m_ptr) ); +_PROTOTYPE( int notify, (endpoint_t dest) ); +_PROTOTYPE( int sendrec, (endpoint_t src_dest, message *m_ptr) ); +_PROTOTYPE( int receive, (endpoint_t src, message *m_ptr) ); +_PROTOTYPE( int send, (endpoint_t dest, message *m_ptr) ); #define ipc_request _ipc_request #define ipc_reply _ipc_reply diff --git a/include/minix/syslib.h b/include/minix/syslib.h index 201c500b8..1d6336645 100755 --- a/include/minix/syslib.h +++ b/include/minix/syslib.h @@ -15,6 +15,8 @@ #include #endif +#include + /* Forward declaration */ struct reg86u; @@ -26,37 +28,41 @@ struct reg86u; _PROTOTYPE( int _taskcall, (int who, int syscallnr, message *msgptr)); _PROTOTYPE( int sys_abort, (int how, ...)); -_PROTOTYPE( int sys_enable_iop, (int proc)); -_PROTOTYPE( int sys_exec, (int proc, char *ptr, +_PROTOTYPE( int sys_enable_iop, (endpoint_t proc)); +_PROTOTYPE( int sys_exec, (endpoint_t proc, char *ptr, char *aout, vir_bytes initpc)); _PROTOTYPE( int sys_fork, (int parent, int child, int *, struct mem_map *ptr)); -_PROTOTYPE( int sys_newmap, (int proc, struct mem_map *ptr)); -_PROTOTYPE( int sys_exit, (int proc)); -_PROTOTYPE( int sys_trace, (int req, int proc, long addr, long *data_p)); +_PROTOTYPE( int sys_newmap, (endpoint_t proc, struct mem_map *ptr)); +_PROTOTYPE( int sys_exit, (endpoint_t proc)); +_PROTOTYPE( int sys_trace, (int req, endpoint_t proc, long addr, long *data_p)); -_PROTOTYPE( int sys_privctl, (int proc, int req, int i, void *p)); -_PROTOTYPE( int sys_nice, (int proc, int priority)); +_PROTOTYPE( int sys_privctl, (endpoint_t proc, int req, int i, void *p)); +_PROTOTYPE( int sys_nice, (endpoint_t proc, int priority)); _PROTOTYPE( int sys_int86, (struct reg86u *reg86p)); _PROTOTYPE( int sys_vm_setbuf, (phys_bytes base, phys_bytes size, phys_bytes high)); -_PROTOTYPE( int sys_vm_map, (int proc_nr, int do_map, +_PROTOTYPE( int sys_vm_map, (endpoint_t proc_nr, int do_map, phys_bytes base, phys_bytes size, phys_bytes offset)); /* Shorthands for sys_sdevio() system call. */ #define sys_insb(port, proc_nr, buffer, count) \ - sys_sdevio(DIO_INPUT, port, DIO_BYTE, proc_nr, buffer, count) + sys_sdevio(DIO_INPUT_BYTE, port, proc_nr, buffer, count, 0) #define sys_insw(port, proc_nr, buffer, count) \ - sys_sdevio(DIO_INPUT, port, DIO_WORD, proc_nr, buffer, count) + sys_sdevio(DIO_INPUT_WORD, port, proc_nr, buffer, count, 0) #define sys_outsb(port, proc_nr, buffer, count) \ - sys_sdevio(DIO_OUTPUT, port, DIO_BYTE, proc_nr, buffer, count) + sys_sdevio(DIO_OUTPUT_BYTE, port, proc_nr, buffer, count, 0) #define sys_outsw(port, proc_nr, buffer, count) \ - sys_sdevio(DIO_OUTPUT, port, DIO_WORD, proc_nr, buffer, count) -_PROTOTYPE( int sys_sdevio, (int req, long port, int type, int proc_nr, - void *buffer, int count)); + sys_sdevio(DIO_OUTPUT_WORD, port, proc_nr, buffer, count, 0) +#define sys_safe_insw(port, ept, grant, offset, count) \ + sys_sdevio(DIO_SAFE_INPUT_WORD, port, ept, (void*)grant, count, offset) +#define sys_safe_outsw(port, ept, grant, offset, count) \ + sys_sdevio(DIO_SAFE_OUTPUT_WORD, port, ept, (void*)grant, count, offset) +_PROTOTYPE( int sys_sdevio, (int req, long port, endpoint_t proc_nr, + void *buffer, int count, vir_bytes offset)); /* Clock functionality: get system times or (un)schedule an alarm call. */ -_PROTOTYPE( int sys_times, (int proc_nr, clock_t *ptr)); +_PROTOTYPE( int sys_times, (endpoint_t proc_nr, clock_t *ptr)); _PROTOTYPE(int sys_setalarm, (clock_t exp_time, int abs_time)); /* Shorthands for sys_irqctl() system call. */ @@ -82,23 +88,31 @@ _PROTOTYPE ( int sys_irqctl, (int request, int irq_vec, int policy, sys_vircopy(src_proc, T, src_vir, dst_proc, T, dst_vir, bytes) #define sys_stackcopy(src_proc, src_vir, dst_proc, dst_vir, bytes) \ sys_vircopy(src_proc, S, src_vir, dst_proc, S, dst_vir, bytes) -_PROTOTYPE(int sys_vircopy, (int src_proc, int src_seg, vir_bytes src_vir, - int dst_proc, int dst_seg, vir_bytes dst_vir, phys_bytes bytes)); +_PROTOTYPE(int sys_vircopy, (endpoint_t src_proc, int src_s, vir_bytes src_v, + endpoint_t dst_proc, int dst_seg, vir_bytes dst_vir, phys_bytes bytes)); #define sys_abscopy(src_phys, dst_phys, bytes) \ sys_physcopy(NONE, PHYS_SEG, src_phys, NONE, PHYS_SEG, dst_phys, bytes) -_PROTOTYPE(int sys_physcopy, (int src_proc, int src_seg, vir_bytes src_vir, - int dst_proc, int dst_seg, vir_bytes dst_vir, phys_bytes bytes)); +_PROTOTYPE(int sys_physcopy, (endpoint_t src_proc, int src_seg, vir_bytes src_vir, + endpoint_t dst_proc, int dst_seg, vir_bytes dst_vir, phys_bytes bytes)); + + +_PROTOTYPE(int sys_safecopyfrom, (endpoint_t, cp_grant_id_t, + vir_bytes, vir_bytes, size_t, int)); +_PROTOTYPE(int sys_safecopyto, (endpoint_t, cp_grant_id_t, + vir_bytes, vir_bytes, size_t, int)); + _PROTOTYPE(int sys_memset, (unsigned long pattern, phys_bytes base, phys_bytes bytes)); + /* Vectored virtual / physical copy calls. */ #if DEAD_CODE /* library part not yet implemented */ _PROTOTYPE(int sys_virvcopy, (phys_cp_req *vec_ptr,int vec_size,int *nr_ok)); _PROTOTYPE(int sys_physvcopy, (phys_cp_req *vec_ptr,int vec_size,int *nr_ok)); #endif -_PROTOTYPE(int sys_umap, (int proc_nr, int seg, vir_bytes vir_addr, +_PROTOTYPE(int sys_umap, (endpoint_t proc_nr, int seg, vir_bytes vir_addr, vir_bytes bytes, phys_bytes *phys_addr)); _PROTOTYPE(int sys_segctl, (int *index, u16_t *seg, vir_bytes *off, phys_bytes phys, vir_bytes size)); @@ -118,17 +132,17 @@ _PROTOTYPE(int sys_segctl, (int *index, u16_t *seg, vir_bytes *off, #define sys_getmonparams(v,vl) sys_getinfo(GET_MONPARAMS, v,vl, 0,0) #define sys_getschedinfo(v1,v2) sys_getinfo(GET_SCHEDINFO, v1,0, v2,0) #define sys_getlocktimings(dst) sys_getinfo(GET_LOCKTIMING, dst, 0,0,0) -#define sys_getbiosbuffer(virp, sizep) sys_getinfo(GET_BIOSBUFFER, virp, \ - sizeof(*virp), sizep, sizeof(*sizep)) +#define sys_getbiosbuffer(virp, sizep) \ + sys_getinfo(GET_BIOSBUFFER, virp, sizeof(*virp), sizep, sizeof(*sizep)) _PROTOTYPE(int sys_getinfo, (int request, void *val_ptr, int val_len, void *val_ptr2, int val_len2) ); /* Signal control. */ -_PROTOTYPE(int sys_kill, (int proc, int sig) ); -_PROTOTYPE(int sys_sigsend, (int proc_nr, struct sigmsg *sig_ctxt) ); -_PROTOTYPE(int sys_sigreturn, (int proc_nr, struct sigmsg *sig_ctxt) ); -_PROTOTYPE(int sys_getksig, (int *k_proc_nr, sigset_t *k_sig_map) ); -_PROTOTYPE(int sys_endksig, (int proc_nr) ); +_PROTOTYPE(int sys_kill, (endpoint_t proc, int sig) ); +_PROTOTYPE(int sys_sigsend, (endpoint_t proc_nr, struct sigmsg *sig_ctxt) ); +_PROTOTYPE(int sys_sigreturn, (endpoint_t proc_nr, struct sigmsg *sig_ctxt) ); +_PROTOTYPE(int sys_getksig, (endpoint_t *k_proc_nr, sigset_t *k_sig_map) ); +_PROTOTYPE(int sys_endksig, (endpoint_t proc_nr) ); /* NOTE: two different approaches were used to distinguish the device I/O * types 'byte', 'word', 'long': the latter uses #define and results in a @@ -142,15 +156,15 @@ _PROTOTYPE(int sys_vinw, (pvw_pair_t *pvw_pairs, int nr_ports) ); _PROTOTYPE(int sys_vinl, (pvl_pair_t *pvl_pairs, int nr_ports) ); /* Shorthands for sys_out() system call. */ -#define sys_outb(p,v) sys_out((p), (unsigned long) (v), DIO_BYTE) -#define sys_outw(p,v) sys_out((p), (unsigned long) (v), DIO_WORD) -#define sys_outl(p,v) sys_out((p), (unsigned long) (v), DIO_LONG) +#define sys_outb(p,v) sys_out((p), (unsigned long) (v), _DIO_BYTE) +#define sys_outw(p,v) sys_out((p), (unsigned long) (v), _DIO_WORD) +#define sys_outl(p,v) sys_out((p), (unsigned long) (v), _DIO_LONG) _PROTOTYPE(int sys_out, (int port, unsigned long value, int type) ); /* Shorthands for sys_in() system call. */ -#define sys_inb(p,v) sys_in((p), (v), DIO_BYTE) -#define sys_inw(p,v) sys_in((p), (v), DIO_WORD) -#define sys_inl(p,v) sys_in((p), (v), DIO_LONG) +#define sys_inb(p,v) sys_in((p), (v), _DIO_BYTE) +#define sys_inw(p,v) sys_in((p), (v), _DIO_WORD) +#define sys_inl(p,v) sys_in((p), (v), _DIO_LONG) _PROTOTYPE(int sys_in, (int port, unsigned long *value, int type) ); /* pci.c */ diff --git a/include/minix/type.h b/include/minix/type.h index d4a0c74f8..0628bbd01 100755 --- a/include/minix/type.h +++ b/include/minix/type.h @@ -13,6 +13,7 @@ typedef unsigned int vir_clicks; /* virtual addr/length in clicks */ typedef unsigned long phys_bytes; /* physical addr/length in bytes */ typedef unsigned int phys_clicks; /* physical addr/length in clicks */ +typedef int endpoint_t; /* process identifier */ #if (_MINIX_CHIP == _CHIP_INTEL) typedef unsigned int vir_bytes; /* virtual addresses and lengths in bytes */ @@ -130,7 +131,7 @@ struct machine { int pc_at; int ps_mca; int processor; - int protected; + int prot; int vdu_ega; int vdu_vga; };