From: Tomas Hruby Date: Thu, 12 Nov 2009 08:42:18 +0000 (+0000) Subject: Idle task never runs X-Git-Tag: v3.1.6~205 X-Git-Url: http://zhaoyanbai.com/repos/%22http:/www.isc.org/icons/Bv9ARM.html?a=commitdiff_plain;h=ad4dcaab7107e4a6ab9ad9340d37726a0e5c3d85;p=minix.git Idle task never runs - idle task becomes a pseudo task which is never scheduled. It is never put on any run queue and never enters userspace. An entry for this task still remains in the process table for time accounting - Instead of panicing if there is not process to schedule, pick_proc() returns NULL which is a signal to put the cpu in an idle state and set everything in such a way that after receiving and interrupt it looks like idle task was preempted - idle task is set non-preemptible to avoid handling in the timer interrupt code which make userspace scheduling simpler as idle task does not need to be handled as a special case. --- diff --git a/kernel/arch/i386/klib386.S b/kernel/arch/i386/klib386.S index 9a0eb5295..944c590a9 100644 --- a/kernel/arch/i386/klib386.S +++ b/kernel/arch/i386/klib386.S @@ -30,7 +30,7 @@ .globl phys_memset /* write pattern anywhere in memory */ .globl mem_rdw /* copy one word from [segment:offset] */ .globl reset /* reset the system */ -.globl idle_task /* task executed when there is no work */ +.globl halt_cpu/* halts the current cpu when idle */ .globl level0 /* call a function at level 0 */ .globl read_cpu_flags /* read the cpu flags */ .globl read_cr0 /* read cr0 */ @@ -436,18 +436,14 @@ idt_zero: /*===========================================================================*/ -/* idle_task */ +/* halt_cpu */ /*===========================================================================*/ -idle_task: /* - * This task is called when the system has nothing else to do. The HLT - * instruction puts the processor in a state where it draws minimum power. + * PUBLIC void halt_cpu(void); + * reanables interrupts and puts the cpu in the halts state. Once an interrupt + * is handled the execution resumes by disabling interrupts and continues */ - push $halt - call level0 /* level0(halt) */ - add $4, %esp - jmp idle_task -halt: +halt_cpu: sti hlt cli @@ -481,7 +477,7 @@ level0: ret /*===========================================================================*/ -/* read_flags */ +/* read_flags */ /*===========================================================================*/ /* * PUBLIC unsigned long read_cpu_flags(void); diff --git a/kernel/main.c b/kernel/main.c index 8bc34d338..5eadff0fe 100644 --- a/kernel/main.c +++ b/kernel/main.c @@ -178,6 +178,8 @@ PUBLIC void main() /* Set ready. The HARDWARE task is never ready. */ if (rp->p_nr == HARDWARE) RTS_SET(rp, RTS_PROC_STOP); + /* IDLE task is never put on a run queue as it is never ready to run */ + if (rp->p_nr == IDLE) RTS_SET(rp, RTS_PROC_STOP); RTS_UNSET(rp, RTS_SLOT_FREE); /* remove RTS_SLOT_FREE and schedule */ alloc_segments(rp); } diff --git a/kernel/proc.c b/kernel/proc.c index d24ebcfdd..e7a04f2aa 100644 --- a/kernel/proc.c +++ b/kernel/proc.c @@ -155,7 +155,19 @@ not_runnable_pick_new: /* this enqueues the process again */ if (proc_no_quantum(proc_ptr)) RTS_UNSET(proc_ptr, RTS_NO_QUANTUM); - proc_ptr = pick_proc(); + + /* + * if we have no process to run, set IDLE as the current process for + * time accounting and put the cpu in and idle state. After the next + * timer interrupt the execution resumes here and we can pick another + * process. If there is still nothing runnable we "schedule" IDLE again + */ + while (!(proc_ptr = pick_proc())) { + proc_ptr = proc_addr(IDLE); + if (priv(proc_ptr)->s_flags & BILLABLE) + bill_ptr = proc_ptr; + halt_cpu(); + } check_misc_flags: @@ -1388,7 +1400,6 @@ PRIVATE struct proc * pick_proc(void) bill_ptr = rp; /* bill for system time */ return rp; } - minix_panic("no runnable processes", NO_NUM); return NULL; } diff --git a/kernel/proto.h b/kernel/proto.h index d52d8ca93..e01e4c3df 100644 --- a/kernel/proto.h +++ b/kernel/proto.h @@ -136,7 +136,7 @@ _PROTOTYPE( vir_bytes alloc_remote_segment, (u32_t *, segframe_t *, int, phys_bytes, vir_bytes, int)); _PROTOTYPE( int intr_init, (int) ); _PROTOTYPE( int intr_disabled, (void) ); -_PROTOTYPE( void idle_task, (void) ); +_PROTOTYPE( void halt_cpu, (void) ); _PROTOTYPE( void arch_init, (void) ); _PROTOTYPE( void ser_putc, (char) ); _PROTOTYPE( void arch_shutdown, (int) ); diff --git a/kernel/table.c b/kernel/table.c index 960801981..73c19d6ff 100644 --- a/kernel/table.c +++ b/kernel/table.c @@ -45,7 +45,14 @@ PUBLIC char *t_stack[TOT_STACK_SPACE / sizeof(char *)]; /* Define flags for the various process types. */ -#define IDL_F (SYS_PROC | PREEMPTIBLE | BILLABLE) /* idle task */ +#define IDL_F (SYS_PROC | BILLABLE) /* idle task is not preemptible as we + * don't want it to interfere with the + * timer tick interrupt handler code. + * Unlike other processes idle task is + * handled in a special way and is + * preempted always if timer tick occurs + * and there is another runnable process + */ #define TSK_F (SYS_PROC) /* kernel tasks */ #define SRV_F (SYS_PROC | PREEMPTIBLE) /* system services */ #define VM_F (SYS_PROC) /* vm */ @@ -113,7 +120,7 @@ PRIVATE int PUBLIC struct boot_image image[] = { /* process nr, pc,flags, qs, queue, stack, traps, ipcto, call, name */ -{IDLE, idle_task,IDL_F, 8, IDLE_Q, IDL_S, 0, 0, no_c,"idle" }, +{IDLE, NULL,IDL_F, 0, IDLE_Q, IDL_S, 0, 0, no_c,"idle" }, {CLOCK,clock_task,TSK_F, 8, TASK_Q, TSK_S, TSK_T, 0, no_c,"clock" }, {SYSTEM, sys_task,TSK_F, 8, TASK_Q, TSK_S, TSK_T, 0, no_c,"system"}, {HARDWARE, 0,TSK_F, 8, TASK_Q, HRD_S, 0, 0, no_c,"kernel"},