From 6f5ceab63ad7ddf7197b5cdf9cf3f21048efca56 Mon Sep 17 00:00:00 2001
From: acevest <zhaoyanbai@126.com>
Date: Tue, 24 Sep 2024 23:12:54 +0800
Subject: [PATCH] =?utf8?q?=E6=81=A2=E5=A4=8D=E7=A1=AC=E7=9B=98=E4=B8=AD?=
 =?utf8?q?=E6=96=AD=E5=A4=84=E7=90=86=E9=80=BB=E8=BE=91?=
MIME-Version: 1.0
Content-Type: text/plain; charset=utf8
Content-Transfer-Encoding: 8bit

---
 drivers/ide.c      | 31 +++++++++++++++----------------
 kernel/task_disk.c |  2 +-
 2 files changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/ide.c b/drivers/ide.c
index 902a971..1aaad36 100644
--- a/drivers/ide.c
+++ b/drivers/ide.c
@@ -115,35 +115,34 @@ void ide_irq_bh_handler(void *arg) {
 
     ide_pci_controller_t *ide_ctrl = ide_pci_controller + channel;
 
-    int r = atomic_read(&(ide_ctrl->request_cnt));
-    int i = atomic_read(&(ide_ctrl->irq_cnt));
-    int c = atomic_read(&(ide_ctrl->consumed_cnt));
-
-    printlxy(MPL_IDE0 + channel, MPO_IDE, "IDE%d req %u irq %u consumed %u", channel, r, i, c);
-}
-
-void ide_irq_handler(unsigned int irq, pt_regs_t *regs, void *devid) {
-    // printk("ide irq %d handler pci status: 0x%02x\n", irq, ata_pci_bus_status());
-    int channel = irq == ide_pci_controller[0].irq_line ? 0 : 1;
-
-    const int drvid = (channel << 1);  // 虚拟一个
-    ide_pci_controller_t *ide_ctrl = ide_pci_controller + channel;
+    // 读相关status寄存器
+    const int drvid = (channel << 1);  // 虚拟一个drvid
     ide_ctrl->status = inb(REG_STATUS(drvid));
     ide_ctrl->pci_status = inb(ide_ctrl->bus_status);
 
+    //
     atomic_inc(&ide_ctrl->irq_cnt);
 
-    ata_dma_stop(channel);
+    //
+    int r = atomic_read(&(ide_ctrl->request_cnt));
+    int i = atomic_read(&(ide_ctrl->irq_cnt));
+    int c = atomic_read(&(ide_ctrl->consumed_cnt));
+    printlxy(MPL_IDE0 + channel, MPO_IDE, "IDE%d req %u irq %u consumed %u", channel, r, i, c);
 
     // 之前这里是用up()来唤醒磁盘任务
     // 但在中断的底半处理，不应该切换任务，因为会引起irq里的reenter问题，导致不能再进底半处理，也无法切换任务
     // 所以就移除了up()里的 schedule()
     // 后来就改用完成量来通知磁盘任务，就不存在这个问题了
-
     // complete会唤醒进程，但不会立即重新调度进程
     complete(&ide_ctrl->intr_complete);
+}
+
+void ide_irq_handler(unsigned int irq, pt_regs_t *regs, void *devid) {
+    // printk("ide irq %d handler pci status: 0x%02x\n", irq, ata_pci_bus_status());
+    int channel = irq == ide_pci_controller[0].irq_line ? 0 : 1;
+
+    ata_dma_stop(channel);
 
-    // 纯debug打印
     add_irq_bh_handler(ide_irq_bh_handler, (void *)channel);
 }
 
diff --git a/kernel/task_disk.c b/kernel/task_disk.c
index e1f15d1..32259af 100644
--- a/kernel/task_disk.c
+++ b/kernel/task_disk.c
@@ -69,7 +69,7 @@ void disk_task_entry(void *arg) {
         int channel = (int)arg;
         ide_pci_controller_t *ide_ctrl = ide_pci_controller + channel;
 
-#if 0
+#if 1
         // 为了在DEBUG时看到RUN
         int cnt = 2;
         for (int i = 0; i < cnt; i++) {
-- 
2.44.0