Ben Gras [Tue, 19 Nov 2013 16:01:23 +0000 (16:01 +0000)]
testmfs, testisofs: MFS format, ISO functionality
testmfs: catch MFS format changes
This test tests mkfs.mfs will generate the same FS image given the same
input files. mkproto creates a proto file (normalizing directory entry
order). The assumption is that a change in the output flags a tacit
change in FS format, and that a FS format change will cause the image
to change.
. Changes to mkfs.mfs that innocently change the format can
change the sha1 output in the script along with it.
. The assumption is that corresponding versions of mkfs.mfs and
MFS will always work together; otherwise a lot breaks (ramdisk etc.)
. Therefore, as long as a generated FS image stays the same with the
same input now, incompatible MFS changes will still be flagged,
even if they work together with the current mkfs.mfs.
testisofs: test ISO filesystem
. to test isofs: prepare an ISO FS image using writeisofs, copy it
to a RAM device, mount it using the iso9660fs server, compare the
SHA1 contents of the files on the ISO with the inputs.
. use su to run certain commands in the script as root
run script: run shell script tests
. they are installed without .sh so should be
searched for as such
. add diagnostic when tests are skipped
Ben Gras [Tue, 19 Nov 2013 15:59:52 +0000 (15:59 +0000)]
libminixfs: allow non-pagesize-multiple FSes
The memory-mapped files implementation (mmap() etc.) is implemented with
the help of the filesystems using the in-VM FS cache. Filesystems tell it
about all cached blocks and their metadata. Metadata is: device offset and,
if any (and known), inode number and in-inode offset. VM can then map in
requested memory-mapped file blocks, and request them if necessary.
A limitation of this system is that filesystem block sizes that are not
a multiple of the VM system (and VM hardware) page size are not possible;
we can't map blocks in partially. (We can copy, but then the benefits of
mapping and sharing the physical pages is gone.) So until before this
commit various pieces of caching code assumed page size multiple
blocksizes. This isn't strictly necessary as long as mmap() needn't be
supported on that FS.
This change allows the in-FS cache code (libminixfs) to allocate any-sized
blocks, and will not interact with the VM cache for non-pagesize-multiple
blocks. In that case it will also signal requestors, by failing 'peek'
requests, that mmap() should not be supported on this FS. VM and VFS
will then gracefully fail all file-mapping mmap() calls, and exec() will
fall back to copying executable blocks instead of mmap()ping executables.
As a result, 3 diagnostics that signal file-mapped mmap()s failing
(hitherto an unusual occurence) are disabled, as ld.so does file-mapped
mmap()s to map in objects it needs. On FSes not supporting it this situation
is legitimate and shouldn't cause so much noise. ld.so will revert to its own
minix-specific allocate+copy style of starting executables if mmap()s fail.
Ben Gras [Tue, 19 Nov 2013 15:58:05 +0000 (15:58 +0000)]
mkfs.mfs, mkproto: minor features
. mkfs.mfs: -T option to set timestamp of files on FS
. mkproto: normalize (sort) order of directory entries
. mkproto bugfix: always print mode in 3 digits (%03o)
Thomas Cort [Mon, 18 Nov 2013 23:00:57 +0000 (18:00 -0500)]
usr.bin/calendar: re-sync with upstream.
Jenkins was failing on usr.bin/calendar/calendar.c:386:6: with
"error: 'fd' may be used uninitialized in this function"
when the level of error checking was turned up.
The error was recently fixed upstream. This commit updates
calendar.c to upstream rev 1.50, updates calendar files too.
Thomas Cort [Sun, 10 Nov 2013 17:06:27 +0000 (12:06 -0500)]
eepromread: support for reading from /dev/eeprom
eepromread could only read EEPROMs through the /dev/i2c interface.
Once the cat24c256 driver is started and claims/reserves the
device, it can no longer be read through the /dev/i2c interface.
This patch adds support for reading from EEPROMs through the
/dev/eeprom interface. For example, to read the on-board eeprom
on the BBB, one would do `eepromread -f /dev/eepromb1s50 -i`.
Ben Gras [Tue, 5 Nov 2013 14:43:44 +0000 (15:43 +0100)]
x86_hdimage.sh -i: crossbuild x86 release CD
. build writeisofs as a native tool too for it
. also mkfs.mfs: make missing file in proto nonlethal
. make setup script a little more self-sufficient
. hdboot: use INSTALL_FILE instead of INSTALL so that the
results get added to the METALOG
Defined register offsets and device configurations in structs to
allow more flexibility. This change will allow to support multiple
instances of a driver using a different bus. This is needed for the
BeagleBone Black.
Thomas Cort [Fri, 25 Oct 2013 19:25:55 +0000 (15:25 -0400)]
Importing usr.bin/write
Replaces commands/write. No Minix-specific changes needed.
The NetBSD version lacks a few features that were present
in the Minix version: cbreak mode, verbose, and shell escapes,
but the main write(1) functionality is there and working.
Thomas Cort [Mon, 14 Oct 2013 14:02:42 +0000 (10:02 -0400)]
Importing usr.bin/nl
* Add _SC_LINE_MAX to unistd.h (value of 15 from NetBSD).
* Add _SC_LINE_MAX case to sysconf(3) in libc.
* usr.bin/nl itself required no Minix specific changes.
- exclude .git instead of .svn when using local source (-c);
- put the git tag (or "copy") in /etc/version rather than something
outdated related to SVN;
- remove SVN-specific -s flag (suggested by Erik).
Ben Gras [Thu, 3 Oct 2013 15:22:07 +0000 (17:22 +0200)]
avoid alloc_contig() for iovec, mfs superblock
. initial workaround for assert() firing on iovec
size on ARM. likely due to alloc_contig() allocating
unusually mapped memory in STATICINIT.
. for the same reason use the regular cache i/o functions
to read the superblock in mfs - avoid the alloc_contig()
that STATICINIT does.
Thomas Cort [Fri, 11 Oct 2013 14:29:16 +0000 (10:29 -0400)]
ipc: add missing printf argument.
A printf statement that only gets compiled when DEBUG_SEM is
defined had a '%' conversion without a corresponding argument.
This patch adds the argument.
Change-Id: I469fbbe6f49802cb86d81b059cb454d967f47079
Reason: Introduces new device nodes and removes old devices nodes which where unintended at this point.
Ben Gras [Fri, 27 Sep 2013 14:29:08 +0000 (14:29 +0000)]
test75: force child to use a minimum of cpu time
test75 sometimes false-fails if something else is going on
at the same time, presumably because the child doesn't spin
enough to register a nonzero getrusage() cpu time value, as
spin() uses the real time to limit the spinning.
this change forces spin() to do a minimum amount of spinning
before exiting, regardless of scheduling.
Ben Gras [Thu, 26 Sep 2013 11:42:31 +0000 (13:42 +0200)]
arm_sdimage.sh: use native minix partition util
. make filesystems on primary partitions to make it
easier on the minix partition util
. so sfdisk isn't required as an external tool
. also make partition and hitherto x86-only utilities
arch-independent