--- /dev/null
+######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
+#
+# This version of terminfo.src is distributed with ncurses and is maintained
+# by Thomas E. Dickey (TD).
+#
+# Report bugs and new terminal descriptions to
+# bug-ncurses@gnu.org
+#
+# $Revision: 1.1 $
+# $Date: 2010/02/03 15:16:32 $
+#
+# The original header is preserved below for reference. It is noted that there
+# is a "newer" version which differs in some cosmetic details (but actually
+# stopped updates several years ago); we have decided to not change the header
+# unless there is also a change in content.
+#
+# To further muddy the waters, it is noted that changes to this file as part of
+# maintenance of ncurses (since 1996) are generally conceded to be copyright
+# under the ncurses MIT-style license. That was the effect of the agreement
+# which the principal authors of ncurses made in 1998. However, since much of
+# the file itself is of unknown authorship (and the disclaimer below makes it
+# obvious that Raymond cannot or will not convey rights over those parts),
+# there is no explicit copyright notice on the file itself.
+#
+# It would also be a nuisance to split the file into unknown/known authorship
+# and move pieces as they are maintained, since many of the maintenance changes
+# have been small corrections to Raymond's translations to/from termcap format,
+# correcting the data but not the accompanying annotations.
+#
+# In any case, note that almost half of this file is not data but annotations
+# which reflect creative effort. Furthermore, the structure of entries to
+# reuse common chunks also is creative (and subject to copyright). Finally,
+# some portions of the data are derivative work under a compatible MIT-style
+# license from xterm.
+#
+#------------------------------------------------------------------------------
+# Version 10.2.1
+# terminfo syntax
+#
+# Eric S. Raymond (current maintainer)
+# John Kunze, Berkeley
+# Craig Leres, Berkeley
+#
+# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
+# address is no longer valid. The latest version can always be found at
+# <http://www.tuxedo.org/terminfo>.
+#
+# PURPOSE OF THIS FILE:
+#
+# This file describes the capabilities of various character-cell terminals,
+# as needed by software such as screen-oriented editors.
+#
+# Other terminfo and termcap files exist, supported by various OS vendors
+# or as relics of various older versions of UNIX. This one is the longest
+# and most comprehensive one in existence. It subsumes not only the entirety
+# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
+# termcap file, but also large numbers of vendor-maintained termcap and
+# terminfo entries more complete and carefully tested than those in historical
+# termcap/terminfo versions.
+#
+# Pointers to related resources (including the ncurses distribution) may
+# be found at <http://www.tuxedo.org/terminfo>.
+#
+# INTERNATIONALIZATION:
+#
+# This file uses only the US-ASCII character set (no ISO8859 characters).
+#
+# This file assumes a US-ASCII character set. If you need to fix this, start
+# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
+# for your character set. \E(A and \E)A enables the British character set
+# with the pound sign at position 2/3.
+#
+# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
+# C1 characters are considered the first-byte set of the Japanese encodings,
+# so \E)0 should be avoided in <enacs> and initialization strings.
+#
+# FILE FORMAT:
+#
+# The version you are looking at may be in any of three formats: master
+# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
+# which by the format given in the header above.
+#
+# The master format is accepted and generated by the terminfo tools in the
+# ncurses suite; it differs from stock (System V-compatible) terminfo only
+# in that it admits a group of capabilities (prefixed `OT') equivalent to
+# various obsolete termcap capabilities. You can, thus, convert from master
+# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
+# you have ncurses `tic -I' is nicer (among other things, it automatically
+# outputs entries in a canonical form).
+#
+# The termcap version is generated automatically from the master version
+# using tic -C. This filtering leaves in the OT capabilities under their
+# original termcap names. All translated entries fit within the 1023-byte
+# string-table limit of archaic termcap libraries except where explicitly
+# noted below. Note that the termcap translation assumes that your termcap
+# library can handle multiple tc capabilities in an entry. 4.4BSD has this
+# capability. Older versions of GNU termcap, through 1.3, do not.
+#
+# For details on these formats, see terminfo(5) in the ncurses distribution,
+# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
+# curses has been declared obsolete by the caretakers of the 4.4BSD sources
+# as of June 1995; they are encouraging everyone to migrate to ncurses.
+#
+# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
+# no entry in this file has embedded comments. This is so source translation
+# to termcap only has to carry over leading comments. Also, no name field
+# contains embedded whitespace (such whitespace confuses rdist).
+#
+# Further note: older versions of this file were often installed with an editor
+# script (reorder) that moved the most common terminal types to the front of
+# the file. This should no longer be necessary, as the file is now ordered
+# roughly by type frequency with ANSI/VT100 and other common types up front.
+#
+# Some information has been merged in from terminfo files distributed by
+# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
+# comes from vendors who maintain official terminfos for their hardware
+# (notably DEC and Wyse).
+#
+# A detailed change history is included at the end of this file.
+#
+# FILE ORGANIZATION:
+#
+# Comments in this file begin with # - they cannot appear in the middle
+# of a terminfo/termcap entry (this feature had to be sacrificed in order
+# to allow standard terminfo and termcap syntax to be generated cleanly from
+# the master format). Individual capabilities are commented out by
+# placing a period between the colon and the capability name.
+#
+# The file is divided up into major sections (headed by lines beginning with
+# the string "########") and minor sections (beginning with "####"); do
+#
+# grep "^####" <file> | more
+#
+# to see a listing of section headings. The intent of the divisions is
+# (a) to make it easier to find things, and (b) to order the database so
+# that important and frequently-encountered terminal types are near the
+# front (so that you'll get reasonable search efficiency from a linear
+# search of the termcap form even if you don't use reorder). Minor sections
+# usually correspond to manufacturers or standard terminal classes.
+# Parenthesized words following manufacturer names are type prefixes or
+# product line names used by that manufacturers.
+#
+# HOW TO READ THE ENTRIES:
+#
+# The first name in an entry is the canonical name for the model or
+# type, last entry is a verbose description. Others are mnemonic synonyms for
+# the terminal.
+#
+# Terminal names look like <manufacturer> <model> - <modes/options>
+# The part to the left of the dash, if a dash is present, describes the
+# particular hardware of the terminal. The part to the right may be used
+# for flags indicating special ROMs, extra memory, particular terminal modes,
+# or user preferences.
+#
+# All names should be in lower case, for consistency in typing.
+#
+# The following are conventionally used suffixes:
+# -2p Has two pages of memory. Likewise 4p, 8p, etc.
+# -am Enable auto-margin.
+# -m Monochrome. Suppress color support
+# -mc Magic-cookie. Some terminals (notably older Wyses) can
+# only support one attribute without magic-cookie lossage.
+# Their base entry is usually paired with another that
+# uses magic cookies to support multiple attributes.
+# -nam No auto-margin - suppress <am> capability
+# -nl No labels - suppress soft labels
+# -ns No status line - suppress status line
+# -rv Terminal in reverse video mode (black on white)
+# -s Enable status line.
+# -vb Use visible bell (<flash>) rather than <bel>.
+# -w Wide - in 132 column mode.
+# If a name has multiple suffixes and one is a line height, that one should
+# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
+#
+# Entries with embedded plus signs are designed to be included through use/tc
+# capabilities, not used as standalone entries.
+#
+# To avoid search clashes, some older all-numeric names for terminals have
+# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
+# All primary names of terminals now have alphanumeric prefixes.
+#
+# Comments marked "esr" are mostly results of applying the termcap-compiler
+# code packaged with ncurses and contemplating the resulting error messages.
+# In many cases, these indicated obvious fixes to syntax garbled by the
+# composers. In a few cases, I was able to deduce corrected forms for garbled
+# capabilities by looking at context. All the information in the original
+# entries is preserved in the comments.
+#
+# In the comments, terminfo capability names are bracketed with <> (angle
+# brackets). Termcap capability names are bracketed with :: (colons).
+#
+# INTERPRETATION OF USER CAPABILITIES
+#
+# The System V Release 4 and XPG4 terminfo format defines ten string
+# capabilities for use by applications, <u0>...<u9>. In this file, we use
+# certain of these capabilities to describe functions which are not covered
+# by terminfo. The mapping is as follows:
+#
+# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
+# u8 terminal answerback description
+# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
+# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
+#
+# The terminal enquire string <u9> should elicit an answerback response
+# from the terminal. Common values for <u9> will be ^E (on older ASCII
+# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
+#
+# The cursor position request (<u7>) string should elicit a cursor position
+# report. A typical value (for VT100 terminals) is \E[6n.
+#
+# The terminal answerback description (u8) must consist of an expected
+# answerback string. The string may contain the following scanf(3)-like
+# escapes:
+#
+# %c Accept any character
+# %[...] Accept any number of characters in the given set
+#
+# The cursor position report (<u6>) string must contain two scanf(3)-style
+# %d format elements. The first of these must correspond to the Y coordinate
+# and the second to the %d. If the string contains the sequence %i, it is
+# taken as an instruction to decrement each value after reading it (this is
+# the inverse sense from the cup string). The typical CPR value is
+# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
+#
+# These capabilities are used by tack(1m), the terminfo action checker
+# (distributed with ncurses 5.0).
+#
+# TABSET FILES
+#
+# All the entries in this file have been edited to assume that the tabset
+# files directory is /usr/share/tabset, in conformance with the File Hierarchy
+# Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
+# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
+#
+# No curses package we know of actually uses these files. If their location
+# is an issue, you will have to hand-patch the file locations before compiling
+# this file.
+#
+# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
+#
+# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
+# character-cell terminals are increasingly replaced by X displays, much of
+# this file is becoming a historical document (this is part of the reason for
+# the new organization, which puts ANSI types, xterm, Unix consoles,
+# and vt100 up front in confidence that this will catch 95% of new hardware).
+#
+# For the terminal types still alive, I'd like to have manufacturer's
+# contact data (Internet address and/or snail-mail + phone).
+#
+# I'm also interested in enriching the comments so that the latter portions of
+# the file do in fact become a potted history of VDT technology as seen by
+# UNIX hackers. Ideally, I'd like the headers for each manufacturer to
+# include its live/dead/out-of-the-business status, and for as many
+# terminal types as possible to be tagged with information like years
+# of heaviest use, popularity, and interesting features.
+#
+# I'm especially interested in identifying the obscure entries listed under
+# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
+# wisdom about them gets lost. If you know a lot about obscure old terminals,
+# please go to the terminfo resource page, grab the UFO file (ufo.ti), and
+# eyeball it for things you can identify and describe.
+#
+# If you have been around long enough to contribute, please read the file
+# with this in mind and send me your annotations.
+#
+# COPYRIGHTS AND OTHER DELUSIONS
+#
+# The BSD ancestor of this file had a standard Regents of the University of
+# California copyright with dates from 1980 to 1993.
+#
+# Some information has been merged in from a terminfo file SCO distributes.
+# It has an obnoxious boilerplate copyright which I'm ignoring because they
+# took so much of the content from the ancestral BSD versions of this file
+# and didn't attribute it, thereby violating the BSD Regents' copyright.
+#
+# Not that anyone should care. However many valid functions copyrights may
+# serve, putting one on a termcap/terminfo file with hundreds of anonymous
+# contributors makes about as much sense as copyrighting a wall-full of
+# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
+#
+# This file deliberately has no copyright. It belongs to no one and everyone.
+# If you claim you own it, you will merely succeed in looking like a fool.
+# Use it as you like. Use it at your own risk. Copy and redistribute freely.
+# There are no guarantees anywhere. Svaha!
+#
+
+######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
+#
+# This section describes terminal classes and brands that are still
+# quite common.
+#
+
+#### Specials
+#
+# Special "terminals". These are used to label tty lines when you don't
+# know what kind of terminal is on it. The characteristics of an unknown
+# terminal are the lowest common denominator - they look about like a ti 700.
+#
+
+dumb|80-column dumb tty,
+ am,
+ cols#80,
+ bel=^G, cr=^M, cud1=^J, ind=^J,
+unknown|unknown terminal type,
+ gn, use=dumb,
+lpr|printer|line printer,
+ OTbs, hc, os,
+ cols#132, lines#66,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
+glasstty|classic glass tty interpreting ASCII control characters,
+ OTbs, am,
+ cols#80,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
+ kcud1=^J, nel=^M^J, .kbs=^H,
+
+vanilla|dumb tty,
+ OTbs,
+ bel=^G, cr=^M, cud1=^J, ind=^J,
+
+# This is almost the same as "dumb", but with no prespecified width.
+# DEL and ^C are hardcoded to act as kill characters.
+# ^D acts as a line break (just like newline).
+# It also interprets
+# \033];xxx\007
+# for compatibility with xterm -TD
+9term|Plan9 terminal emulator for X,
+ am,
+ OTnl=^J, bel=^G, cud1=^J,
+
+#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
+#
+# See the end-of-file comment for more on these.
+#
+
+# ANSI capabilities are broken up into pieces, so that a terminal
+# implementing some ANSI subset can use many of them.
+ansi+local1,
+ cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
+ansi+local,
+ cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
+ cuu=\E[%p1%dA, use=ansi+local1,
+ansi+tabs,
+ cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g,
+ansi+inittabs,
+ it#8, use=ansi+tabs,
+ansi+erase,
+ clear=\E[H\E[J, ed=\E[J, el=\E[K,
+ansi+rca,
+ hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
+ansi+cup,
+ cup=\E[%i%p1%d;%p2%dH, home=\E[H,
+ansi+rep,
+ rep=%p1%c\E[%p2%{1}%-%db,
+ansi+idl1,
+ dl1=\E[M, il1=\E[L,
+ansi+idl,
+ dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
+ansi+idc,
+ dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
+ansi+arrows,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ khome=\E[H,
+ansi+sgr|ansi graphic renditions,
+ blink=\E[5m, invis=\E[8m, rev=\E[7m,
+ sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
+ sgr0=\E[0m,
+ansi+sgrso|ansi standout only,
+ rmso=\E[m, smso=\E[7m,
+ansi+sgrul|ansi underline only,
+ rmul=\E[m, smul=\E[4m,
+ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
+ bold=\E[1m,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
+ use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
+ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
+ dim=\E[2m,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
+ use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
+ansi+pp|ansi printer port,
+ mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ansi+csr|ansi scroll-region plus cursor save & restore,
+ csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
+
+# The IBM PC alternate character set. Plug this into any Intel console entry.
+# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
+# ROM graphics for control characters such as the diamond, up- and down-arrow.
+# This works with the System V, Linux, and BSDI consoles. It's a safe bet this
+# will work with any Intel console, they all seem to have inherited \E[11m
+# from the ANSI.SYS de-facto standard.
+klone+acs|alternate character set for ansi.sys displays,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ rmacs=\E[10m, smacs=\E[11m,
+
+# Highlight controls corresponding to the ANSI.SYS standard. Most
+# console drivers for Intel boxes obey these. Makes the same assumption
+# about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
+# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
+klone+sgr|attribute control for ansi.sys displays,
+ blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
+ rmso=\E[m, rmul=\E[m,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
+ use=klone+acs,
+
+# Most Intel boxes do not treat "invis" (invisible) text.
+klone+sgr8|attribute control for ansi.sys displays,
+ invis=\E[8m,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ use=klone+sgr,
+
+# Highlight controls corresponding to the ANSI.SYS standard. *All*
+# console drivers for Intel boxes obey these. Does not assume \E[11m will
+# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
+# diamond and arrow characters under curses.
+klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
+ blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
+ rmul=\E[m,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
+ sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
+ use=klone+acs,
+
+# KOI8-R (RFC1489) acs (alternate character set)
+# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
+klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
+ acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
+ rmacs=\E[10m, smacs=\E[11m,
+
+# ANSI.SYS color control. The setab/setaf caps depend on the coincidence
+# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
+# but equivalent strings that don't rely on that coincidence:
+# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
+# They match a subset of ECMA-48.
+klone+color|color control for ansi.sys and ISO6429-compatible displays,
+ colors#8, ncv#3, pairs#64,
+ op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+
+# This is better than klone+color, it doesn't assume white-on-black as the
+# default color pair, but many `ANSI' terminals don't grok the <op> cap.
+ecma+color|color control for ECMA-48-compatible terminals,
+ AX,
+ colors#8, ncv#3, pairs#64,
+ op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+
+# Attribute control for ECMA-48-compatible terminals
+ecma+sgr|attribute capabilities for true ECMA-48 terminals,
+ rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
+
+# For comparison, here are all the capabilities implied by the Intel
+# Binary Compatibility Standard (level 2) that fit within terminfo.
+# For more detail on this rather pathetic standard, see the comments
+# near the end of this file.
+ibcs2|Intel Binary Compatibility Standard prescriptions,
+ cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
+ cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
+ hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
+ indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
+ smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
+
+#### ANSI/ECMA-48 terminals and terminal emulators
+#
+# See near the end of this file for details on ANSI conformance.
+# Don't mess with these entries! Lots of other entries depend on them!
+#
+# This section lists entries in a least-capable to most-capable order.
+# if you're in doubt about what `ANSI' matches yours, try them in that
+# order and back off from the first that breaks.
+
+# ansi-mr is for ANSI terminals with ONLY relative cursor addressing
+# and more than one page of memory. It uses local motions instead of
+# direct cursor addressing, and makes almost no assumptions. It does
+# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
+ansi-mr|mem rel cup ansi,
+ am, xon,
+ cols#80, lines#24, use=vanilla, use=ansi+erase,
+ use=ansi+local1,
+
+# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
+# beware of screen size problems and memory relative cursor addressing.
+ansi-mini|any ansi terminal with pessimistic assumptions,
+ am, xon,
+ cols#80, lines#24, use=vanilla, use=ansi+cup,
+ use=ansi+erase,
+
+# ansi-mtabs adds relative addressing and minimal tab support
+ansi-mtabs|any ansi terminal with pessimistic assumptions,
+ it#8,
+ ht=^I, use=ansi+local1, use=ansi-mini,
+
+# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
+#
+# The following is an entry for the full ANSI 3.64 (1977). It lacks
+# padding, but most terminals using the standard are "fast" enough
+# not to require any -- even at 9600 bps. If you encounter problems,
+# try including the padding specifications.
+#
+# Note: the :as: and :ae: specifications are not implemented here, for
+# the available termcap documentation does not make clear WHICH alternate
+# character set to specify. ANSI 3.64 seems to make allowances for several.
+# Please make the appropriate adjustments to fit your needs -- that is
+# if you will be using alternate character sets.
+#
+# There are very few terminals running the full ANSI 3.64 standard,
+# so I could only test this entry on one verified terminal (Visual 102).
+# I would appreciate the results on other terminals sent to me.
+#
+# Please report comments, changes, and problems to:
+#
+# U.S. MAIL: Hugh Hansard
+# Box: 22830
+# Emory University
+# Atlanta, GA. 30322.
+#
+# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
+#
+# (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
+ansi77|ansi 3.64 standard 1977 version,
+ OTbs, am, mir,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
+ kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
+ rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m,
+
+# Procomm and some other ANSI emulations don't recognize all of the ANSI-
+# standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
+# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
+# <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
+# 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
+# to confuse many emulators. On the other hand, we can count on these programs
+# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
+# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
+# ANSI.SYS influence.
+# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
+pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
+ OTbs, am, mir, msgr,
+ cols#80, it#8, lines#24,
+ bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
+ cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
+ use=klone+sgr-dumb,
+pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
+ lines#25, use=pcansi-m,
+pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
+ lines#33, use=pcansi-m,
+pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
+ lines#43, use=pcansi-m,
+# The color versions. All PC emulators do color...
+pcansi|ibm-pc terminal programs claiming to be ansi,
+ use=klone+color, use=pcansi-m,
+pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
+ lines#25, use=pcansi,
+pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
+ lines#33, use=pcansi,
+pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
+ lines#43, use=pcansi,
+
+# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
+# If you want pound signs rather than dollars, replace `B' with `A'
+# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
+# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
+ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
+ mc5i,
+ cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
+ cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
+ ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
+ kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
+ rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
+ s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g,
+ vpa=\E[%i%p1%dd, use=pcansi-m,
+
+ansi+enq|ncurses extension for ANSI ENQ,
+ u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
+ u9=\E[c,
+
+# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
+# standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
+# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
+ansi|ansi/pc-term compatible with color,
+ use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
+
+# ansi-generic is a vanilla ANSI terminal. This is assumed to implement
+# all the normal ANSI stuff with no extensions. It assumes
+# insert/delete line/char is there, so it won't work with
+# vt100 clones. It assumes video attributes for bold, blink,
+# underline, and reverse, which won't matter much if the terminal
+# can't do some of those. Padding is assumed to be zero, which
+# shouldn't hurt since xon/xoff is assumed.
+ansi-generic|generic ansi standard terminal,
+ am, xon,
+ cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
+ use=ansi+rca, use=ansi+erase, use=ansi+tabs,
+ use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
+ use=ansi+sgrbold, use=ansi+arrows,
+
+#### DOS ANSI.SYS variants
+#
+# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
+# documentation (except for the keyboard key reassignment feature, which
+# doesn't fit the <pfkey> model well). The klone+acs sequences were valid
+# though undocumented. The <pfkey> capability is untested but should work for
+# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
+# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
+ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
+ OTbs, am, mir, msgr, xon,
+ cols#80, lines#25,
+ clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
+ is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
+ khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u,
+ rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
+ u7=\E[6n, use=klone+color, use=klone+sgr8,
+ansi.sys|ANSI.SYS 3.1 and later versions,
+ el=\E[K, use=ansi.sys-old,
+
+#
+# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
+# This should only be used when the terminal emulator cannot redefine the keys.
+# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
+# definitions must be restored. If the terminal emulator is quit while in vi
+# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
+# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
+# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
+# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
+# Note that <kcub1> is always BS, because PC-dos can tolerate this change.
+# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
+# Consequently the End keypad key could not be set (it is relatively safe and
+# actually useful because it sends ^@ O, which beeps and opens a line above).
+ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
+ is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
+ rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
+ smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
+ use=ansi.sys,
+#
+# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
+nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
+ dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
+ is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
+ use=ansi.sys,
+#
+# See ansi.sysk and nansi.sys above.
+nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
+ dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
+ is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
+ use=ansi.sysk,
+
+#### ANSI console types
+#
+
+#### BeOS
+#
+# BeOS entry for Terminal program Seems to be almost ANSI
+beterm|BeOS Terminal,
+ am, eo, mir, msgr, xenl, xon,
+ colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
+ bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
+ kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
+ kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
+ nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
+ rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
+ sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
+ smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
+ vpa=\E[%i%p1%dd,
+
+#### Linux consoles
+#
+
+# This entry is good for the 1.2.13 or later version of the Linux console.
+#
+# ***************************************************************************
+# * *
+# * WARNING: *
+# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
+# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
+# * character. Here are the keymap replacement lines that will set this up: *
+# * *
+# keycode 15 = Tab Tab
+# alt keycode 15 = Meta_Tab
+# shift keycode 15 = F26
+# string F26 ="\033[Z"
+# * *
+# * This has to use a key slot which is unfortunate (any unused one will *
+# * do, F26 is the higher-numbered one). The change ought to be built *
+# * into the kernel tables. *
+# * *
+# ***************************************************************************
+#
+# All linux kernels since 1.2.13 (at least) set the screen size
+# themselves; this entry assumes that capability.
+#
+linux-basic|linux console,
+ am, bce, eo, mir, msgr, xenl, xon,
+ it#8, ncv#18,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
+ kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
+ rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
+ use=ecma+color,
+
+linux-m|Linux console no color,
+ colors@, pairs@,
+ setab@, setaf@, setb@, setf@, use=linux,
+
+# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
+# and it matters, turn off <ccc>. The %02x escape used to implement this is
+# not supposedly back-portable to older SV curses (although it has worked fine
+# on Solaris for several years) and not supported in ncurses versions before
+# 1.9.9.
+linux-c-nc|linux console with color-change,
+ ccc,
+ initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x,
+ oc=\E]R, use=linux-basic,
+# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
+linux-c|linux console 1.3.6+ for older ncurses,
+ ccc,
+ initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
+ oc=\E]R, use=linux-basic,
+
+# The 2.2.x kernels add a private mode that sets the cursor type; use that to
+# get a block cursor for cvvis.
+# reported by Frank Heckenbach <frank@g-n-u.de>.
+linux|linux console,
+ civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
+ cvvis=\E[?25h\E[?8c, use=linux-c-nc,
+
+# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
+linux-nic|linux with ich/ich1 suppressed for non-curses programs,
+ ich@, ich1@, use=linux,
+
+# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
+# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
+linux-koi8|linux with koi8 alternate character set,
+ acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
+ use=linux, use=klone+koi8acs,
+
+# Another entry for KOI8-r with Qing Long's acsc.
+# (which one better complies with the standard?)
+linux-koi8r|linux with koi8-r alternate character set,
+ use=linux, use=klone+koi8acs,
+
+# Entry for the latin1 and latin2 fonts
+linux-lat|linux with latin1 or latin2 alternate character set,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
+ use=linux,
+
+# This uses graphics from VT codeset instead of from cp437.
+# reason: cp437 (aka "straight to font") is not functional under luit.
+# from: Andrey V Lukyanov <land@long.yar.ru>.
+linux-vt|linux console using VT codes for graphics,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
+ rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
+ smpch@, use=linux,
+
+# This is based on the Linux console (relies on the console to perform some
+# of the functionality), but does not recognize as many control sequences.
+# The program comes bundled with an old (circa 1998) copy of the Linux
+# console terminfo. It recognizes some non-ANSI/VT100 sequences such as
+# \E* move cursor to home, as as \E[H
+# \E,X same as \E(X
+# \EE move cursor to beginning of row
+# \E[y,xf same as \E[y,xH
+#
+# Note: The status-line support is buggy (dsl does not work).
+kon|kon2|jfbterm|Kanji ON Linux console,
+ ccc@, hs,
+ civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
+ initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
+ use=linux,
+
+#### Mach
+#
+
+# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
+mach|Mach Console,
+ am, km,
+ cols#80, it#8, lines#25,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
+ kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
+ kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
+ smso=\E[7m, smul=\E[4m,
+mach-bold|Mach Console with bold instead of underline,
+ rmul=\E[0m, smul=\E[1m, use=mach,
+mach-color|Mach Console with ANSI color,
+ colors#8, pairs#64,
+ dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
+
+# From: Marcus Brinkmann
+# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
+#
+# Comments in the original are summarized here:
+#
+# hurd uses 8-bit characters (km).
+#
+# Although it doesn't do XON/XOFF, we don't want padding characters (xon).
+#
+# Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
+# have the eat_newline_glitch. It doesn't support setting or removing tab
+# stops (hts/tbc).
+#
+# hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
+# one byte instead three.
+#
+# <ich1> is not included because hurd has insert mode.
+#
+# hurd doesn't use ^J for scrolling, because this could put things into the
+# scrollback buffer.
+#
+# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
+# This is a GNU extension.
+#
+# The original has commented-out ncv, but is restored here.
+#
+# Reading the source, RIS resets cnorm, but not xmous.
+hurd|The GNU Hurd console server,
+ am, bce, bw, eo, km, mir, msgr, xon,
+ colors#8, it#8, ncv#18, pairs#64,
+ acsc=++\,\,--..00ii``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
+ dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
+ invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
+ kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
+ rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
+ gsbom=\E[>1h,
+
+#### OSF Unix
+#
+
+# OSF/1 1.1 Snapshot 2
+pmcons|pmconsole|PMAX console,
+ am,
+ cols#128, lines#57,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
+ ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+
+# SCO console and SOS-Syscons console for 386bsd
+# (scoansi: had unknown capabilities
+# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
+# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
+# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
+# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
+# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
+# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
+# on the <smacs>=\E[12m -- esr)
+#
+# klone+sgr-dumb is an error since the acsc does not match -TD
+#
+# In this description based on SCO's keyboard(HW) manpage list of default
+# function key values:
+# F13-F24 are shifted F1-F12
+# F25-F36 are control F1-F12
+# F37-F48 are shift+control F1-F12
+#
+# hpa/vpa work in the console, but not in scoterm:
+# hpa=\E[%p1%dG,
+# vpa=\E[%p1%dd,
+#
+# SCO's terminfo uses
+# kLFT=\E[d,
+# kRIT=\E[c,
+# which do not work (console or scoterm).
+#
+# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
+scoansi-old|SCO Extended ANSI standard crt (5.0.5),
+ OTbs, am, bce, eo, xon,
+ colors#8, cols#80, it#8, lines#25, pairs#64,
+ acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
+ dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
+ ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
+ ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
+ kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
+ kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
+ kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
+ kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
+ kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
+ kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
+ kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
+ kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
+ kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
+ kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
+ kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
+ rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
+ rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
+ smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
+scoansi-new|SCO Extended ANSI standard crt (5.0.6),
+ km,
+ civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
+ cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
+ rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
+ sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
+ smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
+ smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
+ smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
+ smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
+ wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
+ use=scoansi-old,
+# make this easy to change...
+scoansi|SCO Extended ANSI standard crt,
+ use=scoansi-old,
+
+# This actually describes the generic SVr4 display driver for Intel boxes.
+# The <dim=\E[2m> isn't documented and therefore may not be reliable.
+# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
+att6386|at386|386at|AT&T WGS 6386 console,
+ am, bw, eo, xon,
+ cols#80, it#8, lines#25,
+ acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
+ clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
+ indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
+ kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
+ kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
+ kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
+ knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
+ ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
+ sc=\E7,
+ sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
+ sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
+ tbc=\E[2g, vpa=\E[%i%p1%dd, use=klone+color,
+# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
+pc6300plus|AT&T 6300 plus,
+ OTbs, am, xon,
+ cols#80, lines#24,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
+ clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
+ dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
+ home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
+ invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
+ kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
+ nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+
+# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
+#
+# I have a UNIX PC which I use as a terminal attached to my Linux PC.
+# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
+# is broken. All the special key sequences are broken, making it unusable
+# with Emacs. The problem stems from the following:
+#
+# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
+# keypad!), loadable fonts, and strange highlighting modes ("dithered"
+# half-intensity, "smeared" bold, and real strike-out, for example.) It also
+# uses resizable terminal windows, but the bundled terminal program always
+# uses an 80x24 window (and doesn't support seem to support a 132-column
+# mode.)
+#
+# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
+# library which was a superset of SVr3.5 curses (called tam, for "terminal
+# access method".) tam includes support for real, overlapping windows,
+# onscreen function key labels, and bitmap graphics. But since the primary
+# user interface on the UNIX PC was a GUI program (ua, for "user
+# assistant",) and remote administration was considered important for the
+# machine, tam also supported VT100-compatible terminals attached to the
+# serial port or used across the StarLan network. To simulate the extra keys
+# not present on a VT100, users could press ESC and a two-letter sequence,
+# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
+# however, were not the same as those sent by the actual Undo key. The
+# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
+# (If you're interested in adding some of the tam calls to ncurses, btw, I
+# have the full documentation and several programs which use tam. It also
+# used an extended terminfo format to describe key sequences, special
+# highlighting modes, etc.)
+#
+# KEYS: This means that ncurses would quite painful on the UNIX PC, since
+# there are two sequences for every key-modifier combination (local keyboard
+# sequence and remote "VT100" sequence.) But I doubt many people are trying
+# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
+# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
+# seem to have been built from the manual describing the VT100 sequences.
+# This means it doesn't work for a real live UNIX PC.
+#
+# FONTS: The UNIX PC also has a strange interpretation of "alternate
+# character set". Rather than the VT100 graphics you might expect, it allows
+# up to 8 custom fonts to be loaded at any given time. This means that
+# programs expecting VT100 graphics will usually be disappointed. For this
+# reason I have disabled the smacs/rmacs sequences, but they could easily be
+# re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
+# manpage), should you wish to do so:
+#
+# SGR10 - Select font 0 - ESC [ 10 m or SO
+# SGR11 - Select font 1 - ESC [ 11 m or SI
+# SGR12 - Select font 2 - ESC [ 12 m
+# ... (etc.)
+# SGR17 - Select font 7 - ESC [ 17 m
+#
+# Graphics for line drawing are not reliably found at *any* character
+# location because the UNIX PC has dynamically reloadable fonts. I use font
+# 0 for regular text and font 1 for italics, but this is by no means
+# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
+#
+# MISC: The cursor visible/cursor invisible sequences were swapped in the
+# distributed terminfo.
+#
+# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
+# the UNIX PC terminfo entry. The modified version works great with Lynx,
+# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
+# attached by serial cable. In Emacs, even the Undo key works, and many
+# applications can now use the F1-F8 keys.
+#
+# esr's notes:
+# Terminfo entry for the AT&T Unix PC 7300
+# from escape(7) in Unix PC 7300 Manual.
+# Somewhat similar to a vt100-am (but different enough
+# to redo this from scratch.)
+#
+# /***************************************************************
+# *
+# * FONT LOADING PROGRAM FOR THE UNIX PC
+# *
+# * This routine loads a font defined in the file ALTFONT
+# * into font memory slot #1. Once the font has been loaded,
+# * it can be used as an alternative character set.
+# *
+# * The call to ioctl with the argument WIOCLFONT is the key
+# * to this routine. For more information, see window(7) in
+# * the PC 7300 documentation.
+# ***************************************************************/
+# #include <string.h> /* needed for strcpy call */
+# #include <sys/window.h> /* needed for ioctl call */
+# #define FNSIZE 60 /* font name size */
+# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
+# /*
+# * The file /usr/lib/wfont/special.8.ft comes with the
+# * standard PC software. It defines a graphics character set
+# * similar to that of the Teletype 5425 terminal. To view
+# * this or other fonts in /usr/lib/wfont, use the command
+# * cfont <filename>. For further information on fonts see
+# * cfont(1) in the PC 7300 documentation.
+# */
+#
+# struct altfdata /* structure for alt font data */
+# {
+# short altf_slot; /* memory slot number */
+# char altf_name[FNSIZE]; /* font name (file name) */
+# };
+# ldfont()
+# {
+# int wd; /* window in which altfont will be */
+# struct altfdata altf;
+# altf.altf_slot=1;
+# strcpy(altf.altf_name,ALTFONT);
+# for (wd =1; wd < 12; wd++) {
+# ioctl(wd, WIOCLFONT,&altf);
+# }
+# }
+#
+# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
+# they're confirmed by the man page for the System V display---esr)
+#
+att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
+ am, xon,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
+ clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
+ cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
+ ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
+ kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
+ kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
+ kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
+ kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
+ kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
+ kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
+ ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
+ kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+ kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
+ kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
+ kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
+ kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
+ ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
+ rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
+ smul=\E[4m,
+
+# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
+# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
+# for the application keypad mode. We have added iris-ansi-ap rather than
+# change the original to keypad mode.
+#
+# (iris-ansi: added rmam/smam based on init string -- esr)
+#
+# This entry, and those derived from it, is used in xwsh (also known as
+# winterm). Some capabilities that do not fit into the terminfo model
+# include the shift- and control-functionkeys:
+#
+# F1-F12 generate different codes when shift or control modifiers are used.
+# For example:
+# F1 \E[001q
+# shift F1 \E[013q
+# control-F1 \E[025q
+#
+# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
+# \EOP to \EOS. The shifted and control modifiers still do the same thing.
+#
+# The cursor keys also have different codes:
+# control-up \E[162q
+# control-down \E[165q
+# control-left \E[159q
+# control-right \E[168q
+#
+# shift-up \E[161q
+# shift-down \E[164q
+# shift-left \E[158q
+# shift-right \E[167q
+#
+# control-tab \[072q
+#
+iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
+ am,
+ cols#80, it#8, lines#40,
+ bel=^G, bold=\E[1m, clear=\E[H\E[2J,
+ cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
+ kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
+ kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
+ kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
+ kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
+ kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
+ kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
+ knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
+ kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
+ rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
+ sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
+ tbc=\E[3g,
+iris-ansi-ap|IRIS ANSI in application-keypad mode,
+ is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
+ kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
+
+# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
+# (T.Dickey 98/1/24)
+iris-color|xwsh|IRIX ANSI with color,
+ ncv#33,
+ csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
+ ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
+ rmul=\E[24m, rs1=\Ec,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sitm=\E[3m, use=vt100+enq, use=klone+color,
+ use=iris-ansi-ap,
+
+# The following is a version of the ibm-pc entry distributed with PC/IX,
+# (Interactive Systems' System 3 for the Big Blue), modified by Richard
+# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
+# (the former is untrue, and the latter failed under UCB/man); standout and
+# underline modes have been added. Note: this entry describes the "native"
+# capabilities of the PC monochrome display, without ANY emulation; most
+# communications packages (but NOT PC/IX connect) do some kind of emulation.
+pcix|PC/IX console,
+ am, bw, eo,
+ cols#80, lines#24,
+ clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
+ smul=\E[4m,
+
+# (ibmpcx: this entry used to be known as ibmx.
+# It formerly included the following extension capabilities:
+# :GC=b:GL=v:GR=t:RT=^J:\
+# :GH=\E[196g:GV=\E[179g:\
+# :GU=\E[193g:GD=\E[194g:\
+# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
+# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
+# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
+# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
+# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
+# what was there before. -- esr)
+ibmpcx|xenix|ibmx|IBM PC xenix console display,
+ OTbs, am, msgr,
+ cols#80, lines#25,
+ clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
+ kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
+ kpp=\E[Z, use=klone+acs, use=klone+sgr8,
+
+#### QNX
+#
+
+# QNX 4.0 Console
+# Michael's original version of this entry had <am@>, <smcup=\Ei>,
+# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
+# right corner without triggering a scroll. The ncurses terminfo library can
+# handle this case with the <ich1> capability, and prefers <am> for better
+# optimization. Bug: The <op> capability resets attributes.
+# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
+# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
+qnx|qnx4|qnx console,
+ daisy, km, mir, msgr, xhpa, xt,
+ colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
+ acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
+ bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
+ cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
+ dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
+ il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
+ kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
+ kDL=\377\366, kEND=\377\301, kEOL=\377\311,
+ kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
+ kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
+ kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
+ kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
+ kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
+ kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
+ kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
+ kclo=\377\343, kclr=\377\341, kcmd=\377\245,
+ kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
+ kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
+ kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
+ ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
+ kext=\377\270, kf1=\377\201, kf10=\377\212,
+ kf11=\377\256, kf12=\377\257, kf13=\377\213,
+ kf14=\377\214, kf15=\377\215, kf16=\377\216,
+ kf17=\377\217, kf18=\377\220, kf19=\377\221,
+ kf2=\377\202, kf20=\377\222, kf21=\377\223,
+ kf22=\377\224, kf23=\377\333, kf24=\377\334,
+ kf25=\377\225, kf26=\377\226, kf27=\377\227,
+ kf28=\377\230, kf29=\377\231, kf3=\377\203,
+ kf30=\377\232, kf31=\377\233, kf32=\377\234,
+ kf33=\377\235, kf34=\377\236, kf35=\377\276,
+ kf36=\377\277, kf37=\377\321, kf38=\377\322,
+ kf39=\377\323, kf4=\377\204, kf40=\377\324,
+ kf41=\377\325, kf42=\377\326, kf43=\377\327,
+ kf44=\377\330, kf45=\377\331, kf46=\377\332,
+ kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
+ kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
+ khlp=\377\350, khome=\377\240, khts=\377\342,
+ kich1=\377\253, kil1=\377\273, kind=\377\261,
+ kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
+ knp=\377\252, knxt=\377\312, kopn=\377\357,
+ kopt=\377\353, kpp=\377\242, kprt=\377\255,
+ kprv=\377\302, krdo=\377\336, kref=\377\354,
+ kres=\377\360, krfr=\377\347, kri=\377\271,
+ krmir=\377\313, krpl=\377\362, krst=\377\352,
+ ksav=\377\361, kslt=\377\247, kspd=\377\335,
+ ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
+ rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
+ rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
+ setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
+ smso=\E(, smul=\E[,
+#
+#
+qnxt|qnxt4|QNX4 terminal,
+ crxm, use=qnx4,
+#
+qnxm|QNX4 with mouse events,
+ maddr#1,
+ chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
+ mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
+ mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
+ smicm=\E/>2h, use=qnx4,
+#
+qnxw|QNX4 windows,
+ xvpa, use=qnxm,
+#
+# Monochrome QNX4 terminal or console. Setting this terminal type will
+# allow an application running on a color console to behave as if it
+# were a monochrome terminal. Output will be through stdout instead of
+# console writes because the term routines will recognize that the
+# terminal name starts with 'qnxt'.
+#
+qnxtmono|Monochrome QNX4 terminal or console,
+ colors@, pairs@,
+ scp@, use=qnx4,
+
+# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
+# (esr: commented out <scp> and <rmcup> to avoid warnings.)
+# (TD: derive from original qnx4 entry)
+qnxt2|qnx 2.15 serial terminal,
+ am,
+ civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
+ rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
+
+# QNX ANSI terminal definition
+qansi-g|QNX ANSI,
+ am, eslok, hs, xon,
+ colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
+ el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
+ fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
+ ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
+ is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
+ kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
+ kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
+ kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
+ kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
+ kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
+ kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
+ kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
+ kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
+ kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
+ kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
+ kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
+ kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
+ kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
+ kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
+ kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
+ kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
+ khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
+ kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
+ kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
+ kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
+ ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
+ rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
+ rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[2g,
+ tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
+#
+qansi|QNX ansi with console writes,
+ daisy, xhpa, use=qansi-g,
+#
+qansi-t|QNX ansi without console writes,
+ crxm, use=qansi,
+#
+qansi-m|QNX ansi with mouse,
+ maddr#1,
+ chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
+ mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
+ mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
+ smicm=\E[>2h, use=qansi,
+#
+qansi-w|QNX ansi for windows,
+ xvpa, use=qansi-m,
+
+#### NetBSD consoles
+#
+# pcvt termcap database entries (corresponding to release 3.31)
+# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
+#
+# (For the terminfo master file, I translated these into terminfo syntax.
+# Then I dropped all the pseudo-HP entries. we don't want and can't use
+# the :Xs: flag. Then I split :is: into a size-independent <is1> and a
+# size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
+
+# NOTE: <ich1> has been taken out of this entry. for reference, it should
+# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
+# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
+pcvtXX|pcvt vt200 emulator (DEC VT220),
+ am, km, mir, msgr, xenl,
+ it#8, vt#3,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
+ is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
+ kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
+ khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
+ nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
+ ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+
+# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
+# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
+# 50 lines entries; 80 columns
+pcvt25|dec vt220 emulation with 25 lines,
+ cols#80, lines#25,
+ is2=\E[1;25r\E[25;1H, use=pcvtXX,
+pcvt28|dec vt220 emulation with 28 lines,
+ cols#80, lines#28,
+ is2=\E[1;28r\E[28;1H, use=pcvtXX,
+pcvt35|dec vt220 emulation with 35 lines,
+ cols#80, lines#35,
+ is2=\E[1;35r\E[35;1H, use=pcvtXX,
+pcvt40|dec vt220 emulation with 40 lines,
+ cols#80, lines#40,
+ is2=\E[1;40r\E[40;1H, use=pcvtXX,
+pcvt43|dec vt220 emulation with 43 lines,
+ cols#80, lines#43,
+ is2=\E[1;43r\E[43;1H, use=pcvtXX,
+pcvt50|dec vt220 emulation with 50 lines,
+ cols#80, lines#50,
+ is2=\E[1;50r\E[50;1H, use=pcvtXX,
+
+# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
+# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
+# 50 lines entries; 132 columns
+pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
+ cols#132, lines#25,
+ is2=\E[1;25r\E[25;1H, use=pcvtXX,
+pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
+ cols#132, lines#28,
+ is2=\E[1;28r\E[28;1H, use=pcvtXX,
+pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
+ cols#132, lines#35,
+ is2=\E[1;35r\E[35;1H, use=pcvtXX,
+pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
+ cols#132, lines#40,
+ is2=\E[1;40r\E[40;1H, use=pcvtXX,
+pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
+ cols#132, lines#43,
+ is2=\E[1;43r\E[43;1H, use=pcvtXX,
+pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
+ cols#132, lines#50,
+ is2=\E[1;50r\E[50;1H, use=pcvtXX,
+
+# OpenBSD implements a color variation
+pcvt25-color|dec vt220 emulation with 25 lines and color,
+ cols#80, lines#25,
+ is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
+ kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
+ use=ecma+color,
+
+# Terminfo entries to enable the use of the ncurses library in colour on a
+# NetBSD-arm32 console (only tested on a RiscPC).
+# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
+# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
+# typo in invis - TD
+arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
+ am, bce, msgr, xenl, xon,
+ cols#80, it#8, lines#30,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
+ invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
+ kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
+ kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
+ kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
+ rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
+ use=klone+color,
+
+arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
+ cols#132, lines#50, use=arm100,
+
+# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
+# manufactured by Sharp for the Japenese market.
+# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
+x68k|x68k-ite|NetBSD/x68k ITE,
+ cols#96, lines#32,
+ kclr=\E[9~, khlp=\E[28~, use=vt220,
+
+# <tv@pobox.com>:
+# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
+#
+# (still unfinished, but good enough so far.)
+ofcons|DNARD OpenFirmware console,
+ bw,
+ cols#80, lines#30,
+ bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
+ cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
+ cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
+ cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
+ dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
+ flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
+ il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
+ kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
+ kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
+ kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
+ kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
+ rmso=\2330m, rmul=\2330m,
+ sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+ sgr0=\2330m,
+
+# NetBSD "wscons" emulator in vt220 mode.
+# This entry is based on the NetBSD termcap entry, correcting the ncv value.
+# The emulator renders underlined text in red. Colors are otherwise usable.
+#
+# Testing the emulator and reading the source code (NetBSD 2.0), it appears
+# that "vt220" is inaccurate. There are a few vt220-features, but most of the
+# vt220 screens in vttest do not work with this emulator. For instance, it
+# identifies itself (primary DA response) as a vt220 with selective erase. But
+# the selective erase feature does not work. The secondary response is copied
+# from Kermit's emulation of vt220, does not correspond to actual vt220. At
+# the level of detail in a termcap, it is a passable emulator, since ECH does
+# work. Don't use it on a VMS system -TD
+wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
+ bce, msgr,
+ colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
+ is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
+ kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, khome=\E[7~, op=\E[m, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm, use=vt220,
+
+wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
+ km, use=wsvt25,
+
+# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
+# DECstation/pmax.
+rcons|BSD rasterconsole,
+ use=sun-il,
+# Color version of above. Color currently only provided by NetBSD.
+rcons-color|BSD rasterconsole with ANSI color,
+ bce,
+ colors#8, pairs#64,
+ op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
+
+# mgterm -- MGL/MGL2, MobileGear Graphic Library
+# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
+# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
+# -- compare with cons25w
+mgterm,
+ OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
+ colors#8, cols#80, it#8, lines#18, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
+ kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
+ kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
+ kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
+ nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
+ rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
+ setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
+
+#### FreeBSD console entries
+#
+# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
+# Andrey Chernov maintains the FreeBSD termcap distributions.
+#
+# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
+# or comment out the :cb: capability in the console entry.
+#
+# Alexander Lukyanov reports:
+# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
+# Now el1 clears not only to the line beginning, but also a large chunk
+# of previous line. But there is another bug - ech does not work at all.
+#
+
+# for syscons
+# common entry without semigraphics
+# Bug: The <op> capability resets attributes.
+# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
+# instance el1 does if the cursor is moved to the right margin first. Removed
+# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
+#
+# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
+# Note that this disables standout with color.
+#
+# The emulator sends difference strings based on shift- and control-keys,
+# like scoansi:
+# F13-F24 are shifted F1-F12
+# F25-F36 are control F1-F12
+# F37-F48 are shift+control F1-F12
+cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
+ am, bce, bw, eo, msgr, npc,
+ colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
+ cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
+ kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
+ kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
+ kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
+ kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
+ kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
+ kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
+ kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
+ kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
+ kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
+ kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
+ knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
+ ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
+ sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
+cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
+ acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
+ use=cons25w,
+cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
+ colors@, pairs@,
+ bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
+ sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
+ smul=\E[4m, use=cons25,
+cons30|ansi80x30|freebsd console (30-line ansi mode),
+ lines#30, use=cons25,
+cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
+ lines#30, use=cons25-m,
+cons43|ansi80x43|freebsd console (43-line ansi mode),
+ lines#43, use=cons25,
+cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
+ lines#43, use=cons25-m,
+cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
+ lines#50, use=cons25,
+cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
+ lines#50, use=cons25-m,
+cons60|ansi80x60|freebsd console (60-line ansi mode),
+ lines#60, use=cons25,
+cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
+ lines#60, use=cons25-m,
+cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
+ acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
+ use=cons25w,
+cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
+ colors@, pairs@,
+ op@, rmul=\E[m, setab@, setaf@,
+ sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
+ smul=\E[4m, use=cons25r,
+cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
+ lines#50, use=cons25r,
+cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
+ lines#50, use=cons25r-m,
+cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
+ lines#60, use=cons25r,
+cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
+ lines#60, use=cons25r-m,
+# ISO 8859-1 FreeBSD console
+cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
+ acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
+ use=cons25w,
+cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
+ colors@, pairs@,
+ bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
+ sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
+ smul=\E[4m, use=cons25l1,
+cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
+ lines#50, use=cons25l1,
+cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
+ lines#50, use=cons25l1-m,
+cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
+ lines#60, use=cons25l1,
+cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
+ lines#60, use=cons25l1-m,
+
+#### 386BSD and BSD/OS Consoles
+#
+
+# This was the original 386BSD console entry (I think).
+# Some places it's named oldpc3|oldibmpc3.
+# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
+origpc3|origibmpc3|IBM PC 386BSD Console,
+ OTbs, am, bw, eo, xon,
+ cols#80, lines#25,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
+ bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
+ rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
+ smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
+
+# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
+oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
+ OTbs, km,
+ lines#25,
+ bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
+ ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
+ knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
+
+# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
+# Note, the emulator supports many of the additional console features
+# listed in the iBCS2 (e.g. character-set selection) though not all
+# are described here. This entry really ought to be upgraded.
+# Also note, the console will also work with fewer lines after doing
+# "stty rows NN", e.g. to use 24 lines.
+# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
+# Bug: The <op> capability resets attributes.
+bsdos-pc|IBM PC BSD/OS Console,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ use=bsdos-pc-nobold,
+
+bsdos-pc-nobold|BSD/OS PC console w/o bold,
+ use=klone+color, use=bsdos-pc-m,
+
+bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
+ OTbs, am, eo, km, xon,
+ cols#80, it#8, lines#25,
+ bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
+ kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
+ sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
+ use=klone+sgr8,
+
+# Old names for BSD/OS PC console used in releases before 4.1.
+pc3|BSD/OS on the PC Console,
+ use=bsdos-pc-nobold,
+ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
+ use=bsdos-pc,
+
+# BSD/OS on the SPARC
+bsdos-sparc|Sun SPARC BSD/OS Console,
+ use=sun,
+
+# BSD/OS on the PowerPC
+bsdos-ppc|PowerPC BSD/OS Console,
+ use=bsdos-pc,
+
+#### DEC VT52
+# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
+#
+# Actually (TD pointed this out at the time the acsc string was added):
+# vt52 shouldn't define full acsc since most of the cells don't match.
+# see vt100 manual page A-31. This is the list that does match:
+# f degree
+# g plus/minus
+# h right-arrow
+# k down-arrow
+# m scan-1
+# o scan-3
+# q scan-5
+# s scan-7
+# The line-drawing happens to work in several terminal emulators, but should
+# not be used as a guide to the capabilities of the vt52. Note in particular
+# that vt52 does not support line-drawing characters (the scan-X values refer
+# to a crude plotting feature) -TD
+vt52|dec vt52,
+ OTbs,
+ cols#80, it#8, lines#24,
+ acsc=ffgghhompoqqss.k, bel=^G, clear=\EH\EJ, cr=^M,
+ cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
+
+#### DEC VT100 and compatibles
+#
+# DEC terminals from the vt100 forward are collected here. Older DEC terminals
+# and micro consoles can be found in the `obsolete' section. More details on
+# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
+# found near the end of this file.
+#
+# Except where noted, these entries are DEC's official terminfos.
+# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
+# Engineering for more information. Updated terminfos and termcaps
+# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
+#
+# In October 1995 DEC sold its terminals business, including the VT and Dorio
+# line and trademark, to SunRiver Data Systems. SunRiver has since changed
+# its name to Boundless Technologies; see http://www.boundless.com.
+#
+
+# NOTE: Any VT100 emulation, whether in hardware or software, almost
+# certainly includes what DEC called the `Level 1 editing extension' codes;
+# only the very oldest VT100s lacked these and there probably aren't any of
+# those left alive. To capture these, use one of the VT102 entries.
+#
+# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
+# since the cursor is left in a different position while in the
+# weird state (concept at beginning of next line, vt100 at end
+# of this line) so all versions of vi before 3.7 don't handle
+# <xenl> right on vt100. The correct way to handle <xenl> is when
+# you output the char in column 80, immediately output CR LF
+# and then assume you are in column 1 of the next line. If <xenl>
+# is on, am should be on too.
+#
+# I assume you have smooth scroll off or are at a slow enough baud
+# rate that it doesn't matter (1200? or less). Also this assumes
+# that you set auto-nl to "on", if you set it off use vt100-nam
+# below.
+#
+# The padding requirements listed here are guesses. It is strongly
+# recommended that xon/xoff be enabled, as this is assumed here.
+#
+# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
+# tab settings are in non-volatile memory and don't need to be
+# reset upon login. Also setting the number of columns glitches
+# the screen annoyingly. You can type "reset" to get them set.
+#
+# The VT100 series terminals have cursor ("arrows") keys which can operate
+# in two different modes: Cursor Mode and Application Mode. Cursor Mode
+# is the reset state, and is assumed to be the normal state. Application
+# Mode is the "set" state. In Cursor Mode, the cursor keys transmit
+# "Esc [ {code}" sequences, conforming to ANSI standards. In Application
+# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
+# was provided primarily as an aid to the porting of VT52 applications. It is
+# assumed that the cursor keys are normally in Cursor Mode, and expected that
+# applications such as vi will always transmit the <smkx> string. Therefore,
+# the definitions for the cursor keys are made to match what the terminal
+# transmits after the <smkx> string is transmitted. If the <smkx> string
+# is a null string or is not defined, then cursor keys are assumed to be in
+# "Cursor Mode", and the cursor keys definitions should match that assumption,
+# else the application may fail. It is also expected that applications will
+# always transmit the <rmkx> string to the terminal before they exit.
+#
+# The VT100 series terminals have an auxiliary keypad, commonly referred to as
+# the "Numeric Keypad", because it is a cluster of numeric and function keys.
+# The Numeric Keypad which can operate in two different modes: Numeric Mode and
+# Application Mode. Numeric Mode is the reset state, and is assumed to be
+# the normal state. Application Mode is the "set" state. In Numeric Mode,
+# the numeric and punctuation keys transmit ASCII 7-bit characters, and the
+# Enter key transmits the same as the Return key (Note: the Return key
+# can be configured to send either LF (\015) or CR LF). In Application Mode,
+# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
+# always send the same "Esc O {code}" sequences. It is assumed that the keypad
+# is normally in Numeric Mode. If an application requires that the keypad be
+# in Application Mode then it is expected that the user, or the application,
+# will set the TERM environment variable to point to a terminfo entry which has
+# defined the <smkx> string to include the codes that switch the keypad into
+# Application Mode, and the terminfo entry will also define function key
+# fields to match the Application Mode control codes. If the <smkx> string
+# is a null string or is not defined, then the keypad is assumed to be in
+# Numeric Mode. If the <smkx> string switches the keypad into Application
+# Mode, it is expected that the <rmkx> string will contain the control codes
+# necessary to reset the keypad to "Normal" mode, and it is also expected that
+# applications which transmit the <smkx> string will also always transmit the
+# <rmkx> string to the terminal before they exit.
+#
+# Here's a diagram of the VT100 keypad keys with their bindings.
+# The top line is the name of the key (some DEC keyboards have the keys
+# labelled somewhat differently, like GOLD instead of PF1, but this is
+# the most "official" name). The second line is the escape sequence it
+# generates in Application Keypad mode (where "$" means the ESC
+# character). The third line contains two items, first the mapping of
+# the key in terminfo, and then in termcap.
+# _______________________________________
+# | PF1 | PF2 | PF3 | PF4 |
+# | $OP | $OQ | $OR | $OS |
+# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
+# | 7 8 9 - |
+# | $Ow | $Ox | $Oy | $Om |
+# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
+# | 4 | 5 | 6 | , |
+# | $Ot | $Ou | $Ov | $Ol |
+# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
+# | 1 | 2 | 3 | |
+# | $Oq | $Or | $Os | enter |
+# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
+# | 0 | . | |
+# | $Op | $On | |
+# |___kc1_______K4____|_kc3__K5_|_kent_@8_|
+#
+# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
+# terminfo guidelines. That is a compromise used to assign the remaining
+# keys on the keypad to kf5-kf0, used on older systems with legacy termcap
+# support:
+vt100+keypad|dec vt100 numeric keypad no fkeys,
+ ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
+vt100+pfkeys|dec vt100 numeric keypad,
+ kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ use=vt100+keypad,
+vt100+fnkeys|dec vt100 numeric keypad,
+ kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
+ kf9=\EOw, use=vt100+pfkeys,
+#
+# A better adaptation to modern keyboards such as the PC's, which have a dozen
+# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
+# use the 5-key arrangement to model the arrow keys as suggested in the
+# terminfo guidelines:
+# _______________________________________
+# | PF1 | PF2 | PF3 | PF4 |
+# | $OP | $OQ | $OR | $OS |
+# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
+# | 7 8 9 - |
+# | $Ow | $Ox | $Oy | $Om |
+# |_ka1__K1_|_________|_ka3__K3_|_________|
+# | 4 | 5 | 6 | , |
+# | $Ot | $Ou | $Ov | $Ol |
+# |_________|_kb2__K2_|_________|_________|
+# | 1 | 2 | 3 | |
+# | $Oq | $Or | $Os | enter |
+# |_kc1__K4_|_________|_kc3__K5_| $OM |
+# | 0 | . | |
+# | $Op | $On | |
+# |___________________|_________|_kent_@8_|
+#
+vt220+keypad|dec vt220 numeric keypad,
+ ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
+ kb3=\EOv, kc2=\EOr,
+#
+vt100+enq|ncurses extension for vt100-style ENQ,
+ u8=\E[?1;2c, use=ansi+enq,
+vt102+enq|ncurses extension for vt102-style ENQ,
+ u8=\E[?6c, use=ansi+enq,
+#
+# And here, for those of you with orphaned VT100s lacking documentation, is
+# a description of the soft switches invoked when you do `Set Up'.
+#
+# Scroll 0-Jump Shifted 3 0-#
+# | 1-Smooth | 1-British pound sign
+# | Autorepeat 0-Off | Wrap Around 0-Off
+# | | 1-On | | 1-On
+# | | Screen 0-Dark Bkg | | New Line 0-Off
+# | | | 1-Light Bkg | | | 1-On
+# | | | Cursor 0-Underline | | | Interlace 0-Off
+# | | | | 1-Block | | | | 1-On
+# | | | | | | | |
+# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
+# | | | | | | | |
+# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
+# | | | 1-On | | | 1-50 Hz
+# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
+# | | 1-ANSI | | 1-8 Bits
+# | Keyclick 0-Off | Parity 0-Off
+# | 1-On | 1-On
+# Margin Bell 0-Off Parity Sense 0-Odd
+# 1-On 1-Even
+#
+# The following SET-UP modes are assumed for normal operation:
+# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
+# WRAP_AROUND_ON JUMP_SCROLL_OFF
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements; I recommend
+# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
+# Unless you have a graphics add-on such as Digital Engineering's VT640
+# (and even then, whenever it can be arranged!) you should set
+# INTERLACE_OFF
+#
+# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
+vt100|vt100-am|dec vt100 (w/advanced video),
+ OTbs, am, mc5i, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
+ lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ use=vt100+fnkeys,
+vt100nam|vt100-nam|vt100 no automargins,
+ am@, xenl@, use=vt100-am,
+vt100-vb|dec vt100 (w/advanced video) & no beep,
+ bel@, flash=\E[?5h\E[?5l, use=vt100,
+
+# Ordinary vt100 in 132 column ("wide") mode.
+vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
+ cols#132, lines#24,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
+vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
+ cols#132, lines#14, vt@,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
+
+# vt100 with no advanced video.
+vt100-nav|vt100 without advanced video option,
+ xmc#1,
+ blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
+ smul@, use=vt100,
+vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
+ cols#132, lines#14, use=vt100-nav,
+
+# vt100 with one of the 24 lines used as a status line.
+# We put the status line on the top.
+vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
+ eslok, hs,
+ lines#23,
+ clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
+ cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
+ fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
+ tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
+
+# Status line at bottom.
+# Clearing the screen will clobber status line.
+vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
+ eslok, hs,
+ lines#23,
+ dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
+ tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
+
+# Most of the `vt100' emulators out there actually emulate a vt102
+# This entry (or vt102-nsgr) is probably the right thing to use for
+# these.
+vt102|dec vt102,
+ dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
+ use=vt100,
+vt102-w|dec vt102 in wide mode,
+ cols#132,
+ rs3=\E[?3h, use=vt102,
+
+# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
+# fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
+# string in the canonical vt100 entry above leaves the screen littered
+# with little snowflake or star characters (IBM PC ROM character \017 = ^O)
+# after highlight turnoffs. This entry should fix that, and even leave
+# ACS support working, at the cost of making multiple-highlight changes
+# slightly more expensive.
+# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
+vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
+ sgr@, sgr0=\E[m, use=vt102,
+
+# VT125 Graphics CRT. Clear screen also erases graphics
+# Some vt125's came configured with vt102 support.
+vt125|vt125 graphics terminal,
+ mir,
+ clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
+
+# This isn't a DEC entry, it came from University of Wisconsin.
+# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
+vt131|dec vt131,
+ OTbs, am, xenl,
+ cols#80, it#8, lines#24, vt#3,
+ bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
+ clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
+ cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
+ ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
+ is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
+ rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
+ rmul=\E[m$<2/>,
+ rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[7m$<2/>, smul=\E[4m$<2/>,
+
+# vt132 - like vt100 but slower and has ins/del line and such.
+# I'm told that <smir>/<rmir> are backwards in the terminal from the
+# manual and from the ANSI standard, this describes the actual
+# terminal. I've never actually used a vt132 myself, so this
+# is untested.
+#
+vt132|DEC vt132,
+ xenl,
+ dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
+ ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
+
+# This vt220 description maps F5--F9 to the second block of function keys
+# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
+# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
+# PF1--PF4 are used as F1--F4.
+#
+vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
+ OTbs, OTpt, am, mir, xenl, xon,
+ cols#80, lines#24, vt#3,
+ OTnl=^J,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
+ clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
+ dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
+ if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
+ is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
+ kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
+ kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
+ rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
+ ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m,
+
+# A much better description of the VT200/220; used to be vt220-8
+# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
+# designation to accommodate bug in pcvt -TD
+vt220|vt200|dec vt220,
+ OTbs, am, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
+ flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
+ kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
+ kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
+ lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
+ mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
+ rmul=\E[24m, rs1=\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+vt220-w|vt200-w|DEC vt220 in wide mode,
+ cols#132,
+ rs3=\E[?3h, use=vt220,
+vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
+ OTbs, am, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
+ csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
+ cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
+ cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
+ dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
+ ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
+ flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
+ ich=\233%p1%d@, if=/usr/share/tabset/vt100,
+ il=\233%p1%dL, il1=\233L, ind=\ED,
+ is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
+ kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
+ kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
+ kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
+ kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
+ kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
+ kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
+ knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
+ lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
+ nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
+ rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
+ rs1=\233?3l, sc=\E7,
+ sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
+ smso=\2337m, smul=\2334m, tbc=\2333g,
+
+# vt220d:
+# This vt220 description regards F6--F10 as the second block of function keys
+# at the top of the keyboard. This mapping follows the description given
+# in the VT220 Programmer Reference Manual and agrees with the labeling
+# on some terminals that emulate the vt220. There is no support for an F5.
+# See vt220 for an alternate mapping.
+#
+vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
+
+vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
+ am@,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
+
+# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
+# (not an official DEC entry!)
+# The problem with real vt220 terminals is they don't send escapes when in
+# in vt220 mode. This can be gotten around two ways. 1> don't send
+# escapes or 2> put the vt220 into vt100 mode and use all the nifty
+# features of vt100 advanced video which it then has.
+#
+# This entry takes the view of putting a vt220 into vt100 mode so
+# you can use the escape key in emacs and everything else which needs it.
+#
+# You probably don't want to use this on a VMS machine since VMS will think
+# it has a vt220 and will get fouled up coming out of emacs
+#
+# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
+# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
+vt200-js|vt220-js|dec vt200 series with jump scroll,
+ am,
+ cols#80,
+ bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ il1=\E[L, ind=\ED,
+ is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
+ rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
+ rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
+
+# This was DEC's vt320. Use the purpose-built one below instead
+#vt320|DEC VT320 in vt100 emulation mode,
+# use=vt220,
+
+# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
+#
+vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
+ am@,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
+
+# These entries are not DEC's official ones, they were purpose-built for the
+# VT320. Here are the designer's notes:
+# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
+# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
+# khome is Home on a PC kbd. Actually 'FIND' on a VT.
+# Things that use <knxt> usually use tab anyways... and things that don't use
+# tab usually use <knxt> instead...
+# kprv is same as tab - Backtab is useless...
+# I left out <sgr> because of its RIDICULOUS complexity,
+# and the resulting fact that it causes the termcap translation of the entry
+# to SMASH the 1k-barrier...
+# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
+# (vt320: uncommented <fsl> --esr)
+vt320|vt300|dec vt320 7 bit terminal,
+ am, eslok, hs, mir, msgr, xenl,
+ cols#80, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
+ home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
+ il1=\E[L, ind=\ED,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
+ kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i,
+ mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m,
+ rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
+ rmul=\E[m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
+vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
+ am@,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
+ use=vt320,
+# We have to init 132-col mode, not 80-col mode.
+vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
+ cols#132, wsl#132,
+ is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ use=vt320,
+vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
+ am@,
+ is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
+ use=vt320-w,
+
+# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
+# which are pretty much a superset of the VT320. They have the
+# host writable status line, yet another different DRCS matrix size,
+# and such, but they add the DEC Technical character set, Multiple text
+# pages, selectable length pages, and the like. The difference between
+# the vt330 and vt340 is that the latter has only 2 planes and a monochrome
+# monitor, the former has 4 planes and a color monitor. These terminals
+# support VT131 and ANSI block mode, but as with much of these things,
+# termcap/terminfo doesn't deal with these features.
+#
+# Note that this entry is are set up in what was the standard way for GNU
+# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
+# keys were switched into application mode at the same time the numeric pad
+# is switched into application mode. This changes the definitions of the
+# arrow keys. Emacs v19 is smarter and mines its keys directly out of
+# your termcap or terminfo entry,
+#
+# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
+# (vt340: string capability "sb=\E[M" corrected to "sr";
+# also, added <rmam>/<smam> based on the init string -- esr)
+vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
+ cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
+ ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
+ home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
+ il1=\E[L, ind=\ED,
+ is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
+ lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
+ rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m, rs1=\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[2$~\E[1$}\E[1;%dH,
+
+# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
+# (originally written with vt420 as its primary name, and usable for it).
+#
+# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
+# text pages and long text pages with selectable length of the vt340, along
+# with left and right margins, rectangular area text copy, fill, and erase
+# operations, selected region character attribute change operations,
+# page memory and rectangle checksums, insert/delete column, reception
+# macros, and other features too numerous to remember right now. TERMCAP
+# can only take advantage of a few of these added features.
+#
+# Note that this entry is are set up in what was the standard way for GNU
+# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
+# keys were switched into application mode at the same time the numeric pad
+# is switched into application mode. This changes the definitions of the
+# arrow keys. Emacs v19 is smarter and mines its keys directly out of
+# your termcap entry,
+#
+# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
+# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
+# also, added <rmam>/<smam> based on the init string -- esr)
+vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
+ el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
+ home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
+ lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
+ rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[2$~\E[1$}\E[1;%dH,
+
+# (vt420: I removed <kf0>, it collided with <kf10>. I also restored
+# a missing <sc> -- esr)
+vt420|DEC VT420,
+ am, mir, xenl, xon,
+ cols#80, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
+ dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
+ if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
+ is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
+ kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
+ rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
+ rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
+ smkx=\E=, smso=\E[7m, smul=\E[4m,
+
+# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
+# takes two parameters, the key and the string. Translating the key is
+# straightforward (keys 1-5 are not defined on real terminals, though some
+# emulators define these):
+#
+# if (key < 16) then value = key;
+# else if (key < 21) then value = key + 1;
+# else if (key < 25) then value = key + 2;
+# else if (key < 27) then value = key + 3;
+# else if (key < 30) then value = key + 4;
+# else value = key + 5;
+#
+# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
+# There's no provision in terminfo for emitting a string in this format, so the
+# application has to know it.
+#
+vt420pc|DEC VT420 w/PC keyboard,
+ kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
+ kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
+ kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
+ kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
+ kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
+ kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
+ kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
+ kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
+ kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
+ kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
+ kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
+ kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[H,
+ pctrm=USR_TERM\:vt420pcdos\:,
+ pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
+ use=vt420,
+
+vt420pcdos|DEC VT420 w/PC for DOS Merge,
+ lines#25,
+ dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
+ pctrm@,
+ rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
+ sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
+
+vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
+ kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
+ use=vt420,
+
+vt510|DEC VT510,
+ use=vt420,
+vt510pc|DEC VT510 w/PC keyboard,
+ use=vt420pc,
+vt510pcdos|DEC VT510 w/PC for DOS Merge,
+ use=vt420pcdos,
+
+# VT520/VT525
+#
+# The VT520 is a monochrome text terminal capable of managing up to
+# four independent sessions in the terminal. It has multiple ANSI
+# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
+# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
+# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
+#
+# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
+# [Alt]/[Print Screen] depending upon which keyboard and which
+# terminal mode is being used. If Set-Up has been disabled or
+# assigned to an unknown key, Set-Up may be entered by pressing
+# [F3] as the first key after power up, regardless of keyboard type.
+# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
+vt520|DEC VT520,
+ am, mir, xenl, xon,
+ cols#80, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
+ dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
+ if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
+ is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
+ kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~,
+ pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
+ rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
+ ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
+ rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m,
+
+# (vt525: I added <rmam>/<smam> based on the init string;
+# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
+vt525|DEC VT525,
+ am, mir, xenl, xon,
+ cols#80, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
+ dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
+ if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
+ is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
+ kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~,
+ pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
+ rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
+ ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
+ rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m,
+
+#### VT100 emulations
+#
+
+# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
+# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
+# to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
+# that this works best with a stock vt100 entry.
+dec-vt100|EWAN telnet's vt100 emulation,
+ use=vt100,
+
+# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
+dec-vt220|DOS tnvt200 terminal emulator,
+ am@, use=vt220,
+
+# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
+# anyone who needs PC VT340 emulation. (or anything below that level, for
+# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
+# RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
+# I can send the address if requested.
+# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
+# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
+z340|zstem vt340 terminal emulator 132col 42line,
+ lines#42,
+ is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
+ use=vt320-w,
+z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
+ am@,
+ is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
+ use=z340,
+
+# CRT is shareware. It implements some xterm features, including mouse.
+crt|crt-vt220|CRT 2.3 emulating VT220,
+ bce, msgr,
+ ncv@,
+ hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
+
+# PuTTY 0.55 (released 3 August 2004)
+# http://www.chiark.greenend.org.uk/~sgtatham/putty/
+#
+# Comparing with 0.51, vttest is much better (only a few problems with the
+# cursor position reports and wrapping).
+#
+# PuTTY 0.51 (released 14 December 2000)
+#
+# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
+# well as SCO and Atari, color palettes from Linux console). Reading the code,
+# it is intended to be VT102 plus selected features. By default, it sets $TERM
+# to xterm, which is incorrect, since several features are misimplemented:
+#
+# Alt+key always sends ESC+key, so 'km' capability is removed.
+#
+# Control responses, wrapping and tabs are buggy, failing a couple of
+# screens in vttest.
+#
+# xterm mouse support is not implemented (unrelease version may).
+#
+# Several features such as backspace/delete are optional; this entry documents
+# the default behavior -TD
+
+putty|PuTTY terminal emulator,
+ am, bce, bw, ccc, hs, mir, msgr, xenl, xon,
+ colors#8, it#8, ncv#22, pairs#64,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
+ dch=\E[%p1%dP, dch1=\E[P,
+ dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
+ dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX,
+ ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ indn=\E[%p1%dS,
+ initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
+ is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
+ kb2=\E[G, kbs=\177, kcan=^C, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
+ kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
+ ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
+ rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
+ rmso=\E[27m, rmul=\E[24m,
+ rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
+ s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
+ smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq,
+vt100-putty|Reset PuTTY to pure vt100,
+ rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
+ use=vt100,
+# palette is hardcoded...
+putty-256color|PuTTY 0.58 with xterm 256-colors,
+ initc@, use=xterm+256color, use=putty,
+
+# One of the keyboard selections is "VT100+".
+# pterm (the X11 port) uses shifted F1-F10 as F11-F20
+putty-vt100|VT100+ keyboard layout,
+ kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
+ kf9=\EOX, use=putty,
+
+# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
+# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
+# (communication program) which supports:
+#
+# - Serial port connections.
+# - TCP/IP (telnet) connections.
+# - VT100 emulation, and selected VT200/300 emulation.
+# - TEK4010 emulation.
+# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
+# Quick-VAN).
+# - Scripts using the "Tera Term Language".
+# - Japanese and Russian character sets.
+#
+# The program does not come with terminfo or termcap entries. However, the
+# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
+# vt52 or doublesize character support; blinking is done with color). Besides
+# the HPA, VPA extensions it also implements CPL and CNL.
+#
+# All of the function keys can be remapped. This description shows the default
+# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
+# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
+# is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
+# kfnd Insert
+# kslt Delete
+# kich1 Home
+# kdch1 PageUp
+# kpp End
+# knp PageDown
+#
+# ANSI colors are implemented, but cannot be combined with video attributes
+# except for reverse.
+#
+# No fonts are supplied with the program, so the acsc string is chosen to
+# correspond with the default Microsoft terminal font.
+#
+# Tera Term recognizes some xterm sequences, including those for setting and
+# retrieving the window title, and for setting the window size (i.e., using
+# "resize -s"), though it does not pass SIGWINCH to the application if the
+# user resizes the window with the mouse.
+teraterm|Tera Term Pro,
+ km, xon@,
+ ncv#43, vt@,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
+ cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
+ il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
+ kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
+ rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
+ smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
+ use=klone+color, use=vt100,
+
+# Tested with WinNT 4.0, the telnet application assumes the screensize is
+# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
+#
+# Other notes:
+# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
+# for casual (occasional) use. Also fails several of the vttest screens,
+# but that is not unusual for vt100 "emulators".
+# b) Does not implement vt100 keypad
+# c) Recognizes a subset of vt52 controls.
+ms-vt100|MS telnet imitating dec vt100,
+ lines#25,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
+ kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
+
+# Tested with Windows 2000, the telnet application runs in a console window,
+# also using 'Terminal' font.
+#
+# Other notes:
+# a) This version has no function keys or numeric keypad. Unlike the older
+# version, the numeric keypad is entirely ignored.
+# b) The program sets $TERM to "ansi", which of course is inaccurate.
+ms-vt100-color|vtnt|windows 2000 ansi (sic),
+ bce,
+ dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
+ use=ms-vt100,
+
+# Based on comments from Federico Bianchi:
+#
+# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
+# scheme for PF keys.
+#
+# and PuTTY wishlist:
+#
+# The modifiers are represented as the codes listed above, prefixed to
+# the normal sequences. If the modifier is pressed alone, its sequence
+# is transmitted twice in succession. If multiple modifiers apply,
+# they're transmitted in the order shift, control, alt.
+#
+# Shift \E^S
+# Alt \E^A,
+# Ctrl \E^C,
+ms-vt100+|vt100+|windows XP vt100+ (sic),
+ kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
+ kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
+ kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
+ kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
+ kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
+ kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
+ kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
+ kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
+ kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
+ kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
+ kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
+ kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
+ kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
+ kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
+ knp=\E/, kpp=\E?, use=ms-vt100-color,
+
+ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
+ use=ms-vt100+,
+
+# a minimal subset of a vt100 (compare with "news-unk).
+tt|tkterm|Don Libes' tk text widget terminal emulator,
+ clear=\E[H\E[J, cr=^M, cuf1=\E[C, cup=\E[%p1%d;%p2%dH,
+ cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmso=\E[m,
+ smso=\E[7m,
+
+#### X terminal emulators
+#
+# You can add the following line to your .Xdefaults to change the terminal type
+# set by the xterms you start up to my-xterm:
+#
+# *termName: my-xterm
+#
+# System administrators can change the default entry for xterm instances
+# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
+# case, xterm will detect and reject an invalid terminal type, falling back
+# to the default of xterm.
+#
+
+# X10/6.6 11/7/86, minus alternate screen, plus (csr)
+# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
+# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
+# as these seem not to work -- esr)
+x10term|vs100-x10|xterm terminal emulator (X10 window system),
+ OTbs, am, km, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#65,
+ bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
+ smso=\E[7m, smul=\E[4m,
+# Compatible with the R5 xterm
+# (from the XFree86 3.2 distribution, <blink=@> removed)
+# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
+# corrected typos in rs2 string - TD
+# added u6-u9 -TD
+xterm-r5|xterm R5 version,
+ OTbs, am, km, msgr, xenl,
+ cols#80, it#8, lines#24,
+ bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
+ kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
+ kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+ kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
+ rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
+ rmul=\E[m,
+ rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
+ sc=\E7,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+ sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, use=vt100+enq,
+# Compatible with the R6 xterm
+# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
+# added khome/kend, hts based on the R6 xterm code - TD
+# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
+# for compatibility with other emulators).
+xterm-r6|xterm-old|xterm X11R6 version,
+ OTbs, am, km, mir, msgr, xenl,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
+ il1=\E[L, ind=^J,
+ is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
+ sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ use=vt100+enq,
+# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
+# The name has been changed and some aliases have been removed.
+xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
+ OTbs, am, bce, km, mir, msgr, xenl,
+ cols#80, it#8, lines#24, ncv@,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=^J,
+ is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
+ kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
+ kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
+ kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
+ memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
+ rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmso=\E[27m, rmul=\E[24m, rs1=^O,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
+ use=ecma+color, use=vt220+keypad,
+
+# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
+# codes for F1-F4 except while in VT220 mode.
+xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
+
+# This version was released in XFree86 3.3.3 (November 1998).
+# Besides providing printer support, it exploits a new feature that allows
+# xterm to use terminfo-based descriptions with the titeInhibit resource.
+# -- the distribution contained incorrect khome/kend values -TD
+xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
+ mc5i,
+ blink=\E[5m, ich1@, invis=\E[8m,
+ is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
+ mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
+ rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
+
+# This version was released in XFree86 4.0.
+xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
+ npc,
+ kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
+ kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
+ ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
+ kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
+ kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
+ kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
+ kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
+ kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
+ kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
+ kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
+ kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
+ kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
+ kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
+ kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ smcup=\E[?1049h, use=xterm-xf86-v333,
+
+# This version was released in XFree86 4.3.
+xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
+ kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
+ kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
+ kbeg@,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ use=xterm-xf86-v40,
+
+# This version was released in XFree86 4.4.
+xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
+ cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
+ rin=\E[%p1%dT, use=xterm-xf86-v43,
+
+xterm-xfree86|xterm terminal emulator (XFree86),
+ use=xterm-xf86-v44,
+
+# This version reflects the current xterm features.
+xterm-new|modern xterm terminal emulator,
+ npc,
+ indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H,
+ kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kb2=\EOE,
+ kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kend=\EOF, kent=\EOM, khome=\EOH, kich1=\E[2~, kmous=\E[M,
+ knp=\E[6~, kpp=\E[5~, rin=\E[%p1%dT, use=xterm+pcfkeys,
+ use=xterm-basic,
+#
+# This fragment describes as much of XFree86 xterm's "pc-style" function
+# keys as will fit into terminfo's 60 function keys.
+# From ctlseqs.ms:
+# Code Modifiers
+# ---------------------------------
+# 2 Shift
+# 3 Alt
+# 4 Shift + Alt
+# 5 Control
+# 6 Shift + Control
+# 7 Alt + Control
+# 8 Shift + Alt + Control
+# ---------------------------------
+# The meta key may also be used as a modifier in this scheme, adding another
+# bit to the parameter.
+xterm+pcfkeys|fragment for PC-style fkeys,
+ use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
+ use=xterm+pce2,
+#
+xterm+noapp|fragment with cursor keys in normal mode,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
+ khome=\E[H,
+
+xterm+app|fragment with cursor keys in application mode,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
+ khome=\EOH,
+#
+# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
+# and revised in patch #167 (2002/8/24). Some other terminal emulators copied
+# the earlier scheme, as noted in the "use=" clauses in this file.
+#
+# The original assignments from patch #94 for cursor-keys had some technical
+# issues:
+#
+# A parameter for a function-key to represent a modifier is just more
+# bits. But for a cursor-key it may change the behavior of the
+# application. For instance, emacs decodes the first parameter of a
+# cursor-key as a repeat count.
+#
+# A parameterized string should (really) not begin with SS3 (\EO).
+# Rather, CSI (\E[) should be used.
+#
+# For these reasons, the original assignments were deprecated. For
+# compatibility reasons, they are still available as a setting of xterm's
+# modifyCursorKeys resource. These fragments list the modified cursor-keys
+# that might apply to xterm+pcfkeys with different values of that resource.
+xterm+pcc3|fragment with modifyCursorKeys:3,
+ kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
+ kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
+ kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
+ kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
+ kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
+ kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
+ kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
+ kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
+ kUP7=\E[>1;7A,
+
+xterm+pcc2|fragment with modifyCursorKeys:2,
+ kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
+ kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
+ kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
+ kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
+ kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
+ kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
+ kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
+
+xterm+pcc1|fragment with modifyCursorKeys:1,
+ kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
+ kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
+ kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
+ kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
+ kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
+ kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
+
+xterm+pcc0|fragment with modifyCursorKeys:0,
+ kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
+ kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
+ kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
+ kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
+ kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
+ kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
+
+#
+# Here are corresponding fragments from xterm patch #216:
+#
+xterm+pcf0|fragment with modifyFunctionKeys:0,
+ kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
+ kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
+ kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
+ kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
+ kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
+ kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
+ kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
+ kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
+ kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
+ kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
+ kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
+ kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
+ kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
+ kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
+ kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
+ kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+#
+xterm+pcf2|fragment with modifyFunctionKeys:2,
+ kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
+ kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
+ kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
+ kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
+ kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
+ kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
+ kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
+ kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
+ kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
+ kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
+ kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
+ kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
+ kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
+ kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
+ kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
+ kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~,
+#
+# Chunks from xterm #230:
+xterm+pce2|fragment with modifyCursorKeys:2,
+ kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
+ kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
+ kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
+ kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
+ kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
+ kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
+ kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
+ kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
+ kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
+ kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
+ use=xterm+edit,
+
+xterm+edit|fragment for 6-key editing-keypad,
+ kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ use=xterm+pc+edit,
+
+xterm+pc+edit|fragment for pc-style editing keypad,
+ kend=\E[4~, khome=\E[1~,
+
+xterm+vt+edit|fragment for vt220-style editing keypad,
+ kfnd=\E[1~, kslt=\E[4~,
+
+#
+# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
+# Alternatively, the same scheme with old-style function keys as in xterm-r6
+# is shown here (because that is used in mrxvt and mlterm):
+xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
+ kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
+ kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
+ kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
+ kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
+ kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
+ kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
+ kf63=\E[13;4~, use=xterm+pcf2,
+#
+# This chunk is used for building the VT220/Sun/PC keyboard variants.
+xterm-basic|modern xterm terminal emulator - common,
+ OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
+ kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
+ memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
+ rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
+ sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
+ smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
+
+# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
+# In retrospect, something like xterm-r6 was intended here -TD
+xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
+ rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
+
+# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
+xterm-16color|xterm with 16 colors like aixterm,
+ use=ibm+16color, use=xterm-new,
+
+# This is a compile-time feature of XFree86 xterm beginning with
+# patch #111 (1999/7/10) -TD
+xterm+256color|xterm 256-color feature,
+ ccc,
+ colors#256, pairs#32767,
+ initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
+ setb@, setf@,
+
+# This is a compile-time feature of XFree86 xterm beginning with
+# patch #115 (1999/9/18) -TD
+#
+# Note that the escape sequences used are the same as for 256-colors - xterm
+# has a different table of default color resource values. If built for
+# 256-colors, it can still handle an 88-color palette by using the initc
+# capability.
+#
+# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
+# which support the xterm+256color feature support the associated initc
+# capability. So it is cancelled in the entries which use this and/or the
+# xterm+256color block.
+#
+# The default color palette for the 256- and 88-colors are different. A
+# given executable will have one palette (perhaps compiled-in). If the program
+# supports xterm's control sequence, it can be programmed using initc.
+xterm+88color|xterm 88-color feature,
+ colors#88, pairs#7744, use=xterm+256color,
+
+# These variants of XFree86 3.9.16 xterm are built as a configure option.
+xterm-256color|xterm with 256 colors,
+ use=xterm+256color, use=xterm-new,
+xterm-88color|xterm with 88 colors,
+ use=xterm+88color, use=xterm-256color,
+
+# These two are used to demonstrate the any-event mouse support, i.e., by
+# using an extended name "XM" which tells ncurses to put the terminal into
+# a special mode when initializing the xterm mouse.
+xterm-1002|testing xterm-mouse,
+ XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
+xterm-1003|testing xterm-mouse,
+ XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
+
+# This is another variant, for XFree86 4.0 xterm (T.Dickey)
+# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
+# To use it, your decTerminalID resource must be set to 200 or above.
+#
+# HTS \E H \210
+# RI \E M \215
+# SS3 \E O \217
+# CSI \E [ \233
+#
+xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
+ OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
+ civis=\233?25l, clear=\233H\2332J,
+ cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
+ cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
+ cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
+ cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
+ dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
+ ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
+ flash=\233?5h$<100/>\233?5l, home=\233H,
+ hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
+ il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
+ is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
+ ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
+ kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
+ kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
+ kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
+ kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
+ kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
+ kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
+ kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
+ kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
+ knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
+ meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
+ ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
+ rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
+ rs1=\Ec,
+ rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
+ sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
+ setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
+ smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
+ smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
+ u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
+
+xterm-hp|xterm with hpterm function keys,
+ kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
+ kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
+ knp=\ES, kpp=\ET, use=xterm-basic,
+
+xterm-sco|xterm with SCO function keys,
+ kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
+ kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
+ kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
+ kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
+ kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
+ kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
+ kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
+ kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
+ kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
+ kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
+ kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
+ use=xterm-basic,
+
+# The xterm-new description has all of the features, but is not completely
+# compatible with vt220. If you are using a Sun or PC keyboard, set the
+# sunKeyboard resource to true:
+# + maps the editing keypad
+# + interprets control-function-key as a second array of keys, so a
+# 12-fkey keyboard can support vt220's 20-fkeys.
+# + maps numeric keypad "+" to ",".
+# + uses DEC-style control sequences for the application keypad.
+#
+xterm-vt220|xterm emulating vt220,
+ kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ use=xterm+app, use=xterm+edit, use=xterm-basic,
+ use=vt220+keypad,
+
+xterm-vt52|xterm emulating dec vt52,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
+ home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
+
+xterm-noapp|xterm with cursor keys in normal mode,
+ rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
+ use=xterm,
+
+xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
+ lines#24, use=xterm-old,
+
+# This is xterm for ncurses.
+xterm|xterm terminal emulator (X Window System),
+ use=xterm-new,
+
+# These entries allow access to the X titlebar and icon name as a status line.
+# Note that twm (and possibly window managers descended from it such as tvtwm,
+# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
+# with it.
+xterm+sl|access X title line and icon name,
+ hs,
+ wsl#40,
+ dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
+xterm+sl-twm|access X title line (pacify twm-descended window managers),
+ hs,
+ wsl#40,
+ dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
+
+#
+# The following xterm variants don't depend on your base version
+#
+# xterm with bold instead of underline
+xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
+ smso=\E[7m, smul=\E[1m, use=xterm-old,
+# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
+# (kterm should not invoke DEC Graphics as the alternate character set
+# -- Kenji Rikitake)
+# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
+# -- MATSUMOTO Shoji)
+# kterm implements acsc via built-in table of X Drawable's
+kterm|kterm kanji terminal emulator (X window system),
+ eslok, hs,
+ ncv@,
+ acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
+ csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
+ kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
+ tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
+kterm-color|kterm-co|kterm with ANSI colors,
+ ncv@, use=kterm, use=ecma+color,
+# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
+xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
+ ich@, ich1@, use=xterm,
+# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
+xterm1|xterm terminal emulator ignoring the alternate screen buffer,
+ rmcup@, smcup@, use=xterm,
+
+# This describes the capabilities of color_xterm, an xterm variant from
+# before ECMA-64 color support was folded into the main-line xterm release.
+# This entry is straight from color_xterm's maintainer.
+# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
+# The README's with the distribution also say that it supports SGR 21, 24, 25
+# and 27, but they are not present in the terminfo or termcap.
+color_xterm|cx|cx100|color_xterm color terminal emulator for X,
+ OTbs, am, km, mir, msgr, xenl,
+ cols#80, it#8, lines#65, ncv@,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
+ kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
+ kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m,
+ rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
+ smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, use=ecma+color, use=vt220+keypad,
+
+# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
+# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
+# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
+# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
+# that each of those implements the home, end, delete keys differently.
+#
+# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
+# colors; note that this is not compatible with the 5.2 version.
+# csw (2002-05-15): make xterm-color primary instead of nxterm, to
+# match XFree86's xterm.terminfo usage and prevent circular links
+xterm-color|nxterm|generic color xterm,
+ ncv@,
+ op=\E[m, use=xterm-r6, use=klone+color,
+
+# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
+gnome-rh62|Gnome terminal,
+ bce,
+ kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ use=xterm-color,
+
+# GNOME Terminal 1.4.0.4 (Redhat 7.2)
+#
+# This implements a subset of vt102 with a random selection of features from
+# other terminals such as color and function-keys.
+#
+# shift-f1 to shift-f10 are f11 to f20
+#
+# NumLock changes the application keypad to approximate vt100 keypad, except
+# that there is no escape sequence matching comma (,).
+#
+# Other defects observed:
+# vt100 LNM mode is not implemented.
+# vt100 80/132 column mode is not implemented.
+# vt100 DECALN is not implemented.
+# vt100 DECSCNM mode is not implemented, so flash does not work.
+# vt100 TBC (tab reset) is not implemented.
+# xterm alternate screen controls do not restore cursor position properly
+# it hangs in tack after running function-keys test.
+gnome-rh72|GNOME Terminal,
+ bce, km@,
+ civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
+
+# GNOME Terminal 2.0.1 (Redhat 8.0)
+#
+# Documentation now claims it implements vt220 (which is demonstrably false).
+# However, it does implement ECH, which is a vt220 feature. And there are
+# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
+# more of its bugs using vttest.
+#
+# However, note that bce and msgr are broken in this release. Tabs (tbc and
+# hts) are broken as well. Sometimes flash (as in xterm-new) works.
+#
+# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
+# operations. Shift-tab generates a distinct sequence so it can be argued
+# that it implements kcbt.
+gnome-rh80|GNOME Terminal,
+ bce@, msgr@,
+ ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
+ kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
+
+# GNOME Terminal 2.2.1 (Redhat 9.0)
+#
+# bce and msgr are repaired.
+gnome-rh90|GNOME Terminal,
+ bce, msgr,
+ hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
+ kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
+ use=gnome-rh80,
+
+# GNOME Terminal 2.14.2 (Fedora Core 5)
+# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
+gnome-fc5|GNOME Terminal,
+ rs1=\Ec,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
+ use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
+
+# GNOME Terminal 2.18.1 (2007 snapshot)
+#
+# For any "recent" version of gnome-terminal, it is futile to attempt to
+# support modifiers on cursor- and keypad keys because the program usually
+# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
+# of the keys (which more/less correspond to the termcap values), and will
+# interpret those according to the $TERM value, but others not in the
+# terminfo according to some constantly changing set of hacker guidelines -TD
+gnome-2007|GNOME Terminal snapshot 2.18.1,
+ use=xterm+pcc2, use=gnome-fc5,
+
+gnome|GNOME Terminal,
+ use=gnome-2007,
+
+# palette is hardcoded...
+gnome-256color|GNOME Terminal with xterm 256-colors,
+ initc@, use=xterm+256color, use=gnome,
+
+# XFCE Terminal 0.2.5.4beta2
+#
+# This is based on some of the same source code, e.g., the VTE library, as
+# gnome-terminal, but has fewer features, fails more screens in vttest.
+# Since most of the terminfo-related behavior is due to the VTE library,
+# the terminfo is the same as gnome-terminal.
+xfce|Xfce Terminal,
+ use=gnome,
+
+# Multi-Gnome-Terminal 1.6.2
+#
+# This does not use VTE, and does have different behavior (compare xfce and
+# gnome).
+mgt|Multi GNOME Terminal,
+ indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
+
+# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
+# or not is debatable).
+kvt|KDE terminal,
+ bce, km@,
+ kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
+
+# Konsole 1.0.1
+# (formerly known as kvt)
+#
+# This program hardcodes $TERM to 'xterm', which is not accurate. However, to
+# simplify this entry (and point out why konsole isn't xterm), we base this on
+# xterm-r6. The default keyboard appears to be 'linux'.
+#
+# Notes:
+# a) konsole implements several features from XFree86 xterm, though none of
+# that is documented - except of course in its source code - apparently
+# because its implementors are unaccustomed to reading documentation - as
+# evidenced by the sparse and poorly edited documentation distributed with
+# konsole. Some features such as the 1049 private mode are recognized but
+# incorrectly implemented as a duplicate of the 47 private mode.
+# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
+# sends PC-style escapes rather than vt100.
+# c) fails vttest menu 3 (Test of character sets) because it does not properly
+# parse some control sequences. Also fails vttest Primary Device Attributes
+# by sending a bogus code (in the source it says it's supposed to be a
+# vt220, which is doubly incorrect because it does not implement vt220
+# control sequences except for a few special cases). Treat it as a
+# mildly-broken vt102.
+#
+# Update for konsole 1.3.2:
+# The 1049 private mode works (but see the other xterm screens in vttest).
+# Primary Device Attributes now returns the code for a vt100 with advanced
+# video option. Perhaps that's intended to be a "mildly-broken vt102".
+#
+# Updated for konsole 1.6.4:
+# add konsole-solaris
+konsole-base|KDE console window,
+ bce, km@, npc,
+ bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
+ ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
+ hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
+ kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
+ kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
+ kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
+ rmso=\E[27m, rmul=\E[24m,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
+ use=ecma+color, use=xterm-r6,
+konsole-linux|KDE console window with linux keyboard,
+ kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
+ kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ use=konsole-base,
+konsole-solaris|KDE console window with Solaris keyboard,
+ kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
+# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
+# than testing the code.
+konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
+ kend=\E[4~, khome=\E[1~, use=konsole-vt100,
+# The value for kbs reflects local customization rather than the settings used
+# for XFree86 xterm.
+konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
+ kend=\EOF, kf1=\EOP, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R,
+ kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
+ kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
+ kf23=\E[23;2~, kf24=\E[24;2~, kf3=\EOR, kf4=\EOS,
+ khome=\EOH, use=konsole-vt100,
+# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
+# it is still useful for deriving the other entries.
+konsole-vt100|KDE console window with vt100 (sic) keyboard,
+ kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
+ kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[H, use=konsole-base,
+konsole-vt420pc|KDE console window with vt420 pc keyboard,
+ kbs=^H, kdch1=\177, use=konsole-vt100,
+konsole-16color|klone of xterm-16color,
+ ncv#32, use=ibm+16color, use=konsole,
+# make a default entry for konsole
+konsole|KDE console window,
+ use=konsole-xf4x,
+
+# palette is hardcoded...
+konsole-256color|KDE console window with xterm 256-colors,
+ initc@, use=xterm+256color, use=konsole,
+
+# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
+#
+# It is nominally a vt102 emulator, with features borrowed from rxvt and
+# xterm.
+#
+# The function keys are numbered based on shift/control/alt modifiers, except
+# that the control-modifier itself is used to spawn a new copy of mlterm (the
+# "-P" option). So control/F1 to control/F12 may not be usable, depending on
+# how it is configured.
+#
+# kf1 to kf12 \E[11~ to \E[24~
+# shift kf1 to kf12 \E[11;2~ to \E[24;2~
+# alt kf1 to kf12 \E[11;3~ to \E[24;3~
+# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
+# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
+# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
+# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
+# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
+#
+mlterm|multi lingual terminal emulator,
+ am, eslok, km, mc5i, mir, msgr, npc, xenl,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
+ is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
+ kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
+ khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
+ knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
+ nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
+ sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
+
+# The insert/delete/home/end keys do not respond to modifiers because mlterm
+# looks in its termcap to decide which string to send. If it used terminfo
+# (when available), it could use the extended names introduced for xterm.
+mlterm+pcfkeys|fragment for PC-style fkeys,
+ kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
+ kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
+ kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
+ kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
+ kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
+ kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
+ kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
+ kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
+ kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
+
+# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
+# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
+# Notes:
+# rxvt 2.21b uses
+# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
+# but some applications don't work with that.
+# It also has an AIX extension
+# box2=lqkxjmwuvtn,
+# and
+# ech=\E[%p1%dX,
+# but the latter does not work correctly.
+#
+# The distributed terminfo says it implements hpa and vpa, but they are not
+# implemented correctly, using relative rather than absolute positioning.
+#
+# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
+# Since rxvt is not really compatible with xterm, it should be configured as
+# "rxvt" or "rxvt-color".
+#
+# removed dch/dch1 because they are inconsistent with bce/ech -TD
+# remove km as per tack test -TD
+rxvt-basic|rxvt terminal base (X Window System),
+ OTbs, am, bce, eo, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
+ ind=^J, is1=\E[?47l\E=\E[?1l,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
+ kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
+ rmul=\E[24m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
+ s0ds=\E(B, s1ds=\E(0, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
+ smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
+ use=rxvt+pcfkeys, use=vt220+keypad,
+# Key Codes from rxvt reference:
+#
+# Note: Shift + F1-F10 generates F11-F20
+#
+# For the keypad, use Shift to temporarily override Application-Keypad
+# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
+# is off, escape sequences toggle Application-Keypad setting.
+# Also note that values of Home, End, Delete may have been compiled
+# differently on your system.
+#
+# Normal Shift Control Ctrl+Shift
+# Tab ^I ESC [ Z ^I ESC [ Z
+# BackSpace ^H ^? ^? ^?
+# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
+# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
+# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
+# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
+# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
+# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
+# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
+# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
+# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
+# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
+# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
+# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
+# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
+# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
+# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
+# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
+# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
+# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
+# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
+# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
+# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
+# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
+# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
+# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
+# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
+# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
+# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
+# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
+# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
+#
+# Application
+# Up ESC [ A ESC [ a ESC O a ESC O A
+# Down ESC [ B ESC [ b ESC O b ESC O B
+# Right ESC [ C ESC [ c ESC O c ESC O C
+# Left ESC [ D ESC [ d ESC O d ESC O D
+# KP_Enter ^M ESC O M
+# KP_F1 ESC O P ESC O P
+# KP_F2 ESC O Q ESC O Q
+# KP_F3 ESC O R ESC O R
+# KP_F4 ESC O S ESC O S
+# XK_KP_Multiply * ESC O j
+# XK_KP_Add + ESC O k
+# XK_KP_Separator , ESC O l
+# XK_KP_Subtract - ESC O m
+# XK_KP_Decimal . ESC O n
+# XK_KP_Divide / ESC O o
+# XK_KP_0 0 ESC O p
+# XK_KP_1 1 ESC O q
+# XK_KP_2 2 ESC O r
+# XK_KP_3 3 ESC O s
+# XK_KP_4 4 ESC O t
+# XK_KP_5 5 ESC O u
+# XK_KP_6 6 ESC O v
+# XK_KP_7 7 ESC O w
+# XK_KP_8 8 ESC O x
+# XK_KP_9 9 ESC O y
+#
+# The source-code for rxvt actually defines mappings for F21-F35, using
+# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
+# are rare, so this entry uses the shift- and control-modifiers as in
+# xterm+pcfkeys to define keys past F12.
+#
+# kIC is normally not used, since rxvt performs a paste for that (shifted
+# insert), unless private mode 35 is set.
+#
+# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
+# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
+rxvt+pcfkeys|fragment for PC-style fkeys,
+ kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
+ kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
+ kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
+ kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
+ kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
+ kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
+ kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
+ kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
+ kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
+ kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
+ kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
+ kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
+ kUP=\E[a, kUP5=\EOa,
+
+rxvt|rxvt terminal emulator (X Window System),
+ ncv@,
+ hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
+ vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
+rxvt-color|rxvt terminal emulator (X Window System),
+ use=rxvt,
+rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
+ use=xterm+256color, use=rxvt,
+rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
+ use=xterm+88color, use=rxvt,
+rxvt-xpm|rxvt terminal emulator (X Window System),
+ use=rxvt,
+rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
+ acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ use=rxvt,
+rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
+ acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
+ use=rxvt-cygwin,
+
+# This variant is supposed to work with rxvt 2.7.7 when compiled with
+# NO_BRIGHTCOLOR defined. rxvt needs more work...
+rxvt-16color|xterm with 16 colors like aixterm,
+ ncv#32, use=ibm+16color, use=rxvt,
+
+# mrxvt 0.5.3
+#
+# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
+# makes its function-keys different from other flavors of rxvt -TD
+mrxvt|multitabbed rxvt,
+ use=xterm+pcc2, use=xterm+r6f2, use=rxvt,
+
+# From: Michael Jennings <mej@valinux.com>
+#
+# Eterm 0.9.3
+#
+# removed kf0 which conflicts with kf10 -TD
+# remove cvvis which conflicts with cnorm -TD
+# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
+# but does otherwise follow the rxvt+pcfkeys model -TD
+# remove nonworking flash -TD
+# remove km as per tack test -TD
+Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
+ am, bce, bw, eo, mc5i, mir, msgr, xenl, xon,
+ btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is1=\E[?47l\E>\E[?1l,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
+ kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
+ kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
+ mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
+ rmso=\E[27m, rmul=\E[24m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
+ smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
+ use=ecma+color,
+
+Eterm-256color|Eterm with xterm 256-colors,
+ use=xterm+256color, use=Eterm,
+
+Eterm-88color|Eterm with 88 colors,
+ use=xterm+88color, use=Eterm,
+
+# xiterm 0.5-5.2
+# This is not based on xterm's source...
+# vttest shows several problems with keyboard, cursor-movements.
+# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
+xiterm|internationalized terminal emulator for X,
+ km@,
+ kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
+
+# These (xtermc and xtermm) are distributed with Solaris. They refer to a
+# variant of xterm which is apparently no longer supported, but are interesting
+# because they illustrate SVr4 curses mouse controls - T.Dickey
+xtermm|xterm terminal emulator (monocrome),
+ OTbs, am, km, mir, msgr, xenl,
+ btns#3, cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
+ home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
+ kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
+ kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
+ knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
+ smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
+
+xtermc|xterm terminal emulator (color),
+ colors#8, ncv#7, pairs#64,
+ op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ use=xtermm,
+
+# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
+# Here's a termcap entry I've been using for xterm_color, which comes
+# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
+# color stuff, I also have a status line defined as the window manager
+# title bar. [I have translated it to terminfo -- ESR]
+xterm-pcolor|xterm with color used for highlights and status line,
+ bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
+ smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
+
+# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
+# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
+# chars look like --esr)
+hpterm|X-hpterm|hp X11 terminal emulator,
+ am, da, db, mir, xhp,
+ cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
+ acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
+ cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
+ cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
+ hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
+ kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
+ kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
+ khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
+ knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
+ memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
+ pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
+ pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
+ pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
+ rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
+ rmul=\E&d@,
+ sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
+ sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
+ smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+# HPUX 11 provides a color version.
+hpterm-color|HP X11 terminal emulator with color,
+ ccc,
+ colors#64, pairs#8,
+ home=\E&a0y0C,
+ initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
+ op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
+
+# This entry describes an xterm with Sun-style function keys enabled
+# via the X resource setting "xterm*sunFunctionKeys:true"
+# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
+# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
+# because we want it to be seen as <kcpy>.
+# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
+# with their Sun keyboard labels instead.
+# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
+xterm-sun|xterm with sunFunctionKeys true,
+ kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
+ kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
+ kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
+ kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
+ kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
+ kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
+ kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
+ kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
+ kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
+ kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
+ kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
+ use=xterm-basic,
+xterms-sun|small (80x24) xterm with sunFunctionKeys true,
+ cols#80, lines#24, use=xterm-sun,
+
+# This is for the extensible terminal emulator on the X11R6 contrib tape.
+# It corresponds to emu's internal emulation:
+# emu -term emu
+# emu's default sets TERM to "xterm", but that doesn't work well -TD
+# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
+# fixes: add civis, cnorm, sgr -TD
+emu|emu native mode,
+ am, bce, mir, msgr, xon,
+ colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
+ acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
+ bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
+ cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
+ cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED,
+ cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
+ dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
+ ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
+ hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
+ is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
+ kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
+ kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
+ kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
+ kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
+ kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
+ kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
+ op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
+ rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
+ setaf=\Er%i%p1%d;,
+ sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
+ sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
+
+# vt220 Terminfo entry for the Emu emulation, corresponds to
+# emu -term vt220
+# with NumLock set (to make the keypad transmit kf0-kf9).
+# fixes: add am, xenl, corrected sgr0 -TD
+emu-220|Emu-220 (vt200-7bit mode),
+ am, xenl, xon,
+ cols#80, it#8, lines#24, vt#200,
+ acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
+ clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
+ cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
+ dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
+ ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
+ hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
+ il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
+ kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
+ kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
+ kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
+ kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
+ kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
+ kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
+ kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
+ ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
+ sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
+ smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
+# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
+# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
+# indicate that it emulates more than one terminal, but incompletely.
+#
+# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
+# It is based on vt102's entry, with some subtle differences, but also
+# has status line
+# supports ANSI colors (except for 'op' string)
+# apparently implements alternate screen like xterm
+# does not use padding, of course.
+mvterm|vv100|SwitchTerm aka mvTERM,
+ am, eslok, hs, km, mir, msgr, xenl,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
+ fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
+ kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
+ op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
+ rmul=\E[m,
+ rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
+ sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
+
+### MTERM
+#
+# This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
+#
+# "mterm -type ansi" sets $TERM to "ansi"
+mterm-ansi|ANSI emulation,
+ am, bw, mir, msgr,
+ it#8,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
+ el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
+ il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
+ invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
+ ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
+ rmul=\E[24m,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ vpa=\E[%i%p1%dd,
+# mterm normally sets $TERM to "mterm"
+mterm|mouse-sun|Der Mouse term,
+ am, bw, mir,
+ it#8,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
+ cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
+ home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
+ rmir=^O, rmso=^T, smir=^Q, smso=^V,
+# "mterm -type decansi" sets $TERM to "decansi"
+#
+# note: kdch1, kfnd, kslt are in the source code, but do not work -TD
+decansi|ANSI emulation with DEC compatibility hacks,
+ am, mir, msgr, xenl,
+ colors#8, it#8, pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
+ il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
+ is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
+ kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
+ ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
+ u7=\E[6n, vpa=\E[%i%p1%dd,
+
+#### MGR
+#
+# MGR is a Bell Labs window system lighter-weight than X.
+# These entries describe MGR's xterm-equivalent.
+# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
+#
+
+mgr|Bellcore MGR (non X) window system terminal emulation,
+ am, km,
+ bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
+ csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
+ cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
+ dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
+ dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
+ ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
+ il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
+ rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
+ smul=\E4n,
+mgr-sun|Mgr window with Sun keyboard,
+ ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
+ kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
+ kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
+ kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
+ kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
+ kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
+ kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
+mgr-linux|Mgr window with Linux keyboard,
+ ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
+ kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
+
+######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
+#
+
+# Columbus UNIX virtual terminal. This terminal also appears in
+# UNIX 4.0 and successors as line discipline 1 (?), but is
+# undocumented and does not really work quite right.
+cbunix|cb unix virtual terminal,
+ OTbs, am, da, db,
+ cols#80, lines#24, lm#0,
+ bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
+ el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
+ smso=\Ea^D, smul=\Ea^A,
+# (vremote: removed obsolete ":nl@:" -- esr)
+vremote|virtual remote terminal,
+ am@,
+ cols#79, use=cbunix,
+
+pty|4bsd pseudo teletype,
+ cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
+ smso=\Ea$, smul=\Ea!, use=cbunix,
+
+# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
+eterm|gnu emacs term.el terminal emulation,
+ am, mir, xenl,
+ cols#80, lines#24,
+ bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
+ rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m,
+
+# Entries for use by the `screen' program by Juergen Weigert,
+# Michael Schroeder, Oliver Laumann. The screen and
+# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
+# come from University of Wisconsin and may be older.
+# (screen: added <cnorm> on ANSI model -- esr)
+#
+# 'screen' defines extensions to termcap. Some are used in its terminal
+# description:
+# G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
+# AX (bool) Does understand ANSI set default fg/bg color
+# (\E[39m / \E[49m).
+# S0 (str) Switch charset 'G0' to the specified charset.
+# E0 (str) Switch charset 'G0' back to standard charset.
+#
+# tested with screen 3.09.08
+screen|VT 100/ANSI X3.64 virtual terminal,
+ OTbs, OTpt, am, km, mir, msgr, xenl, G0,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
+ cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
+ rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
+ S0=\E(%p1%c, use=ecma+color,
+# The bce and status-line entries are from screen 3.9.13 (and require some
+# changes to .screenrc).
+screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
+ bce, use=screen,
+screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
+ dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
+
+# ======================================================================
+# Entries for GNU Screen with 16 colors.
+# Those variations permit to benefit from 16 colors palette, and from
+# bold font and blink attribute separated from bright colors. But they
+# are less portable than the generic "screen" 8 color entries: Their
+# usage makes real sense only if the terminals you attach and reattach
+# do all support 16 color palette.
+
+screen-16color|GNU Screen with 16 colors,
+ use=ibm+16color, use=screen,
+
+screen-16color-s|GNU Screen with 16 colors and status line,
+ use=ibm+16color, use=screen-s,
+
+screen-16color-bce|GNU Screen with 16 colors and BCE,
+ use=ibm+16color, use=screen-bce,
+
+screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
+ bce, use=ibm+16color, use=screen-s,
+
+# ======================================================================
+# Entries for GNU Screen 4.02 with --enable-colors256.
+
+screen-256color|GNU Screen with 256 colors,
+ ccc@,
+ initc@, use=xterm+256color, use=screen,
+
+screen-256color-s|GNU Screen with 256 colors and status line,
+ ccc@,
+ initc@, use=xterm+256color, use=screen-s,
+
+screen-256color-bce|GNU Screen with 256 colors and BCE,
+ ccc@,
+ initc@, use=xterm+256color, use=screen-bce,
+
+screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
+ bce, ccc@,
+ initc@, use=xterm+256color, use=screen-s,
+
+# ======================================================================
+
+# Read the fine manpage:
+# When screen tries to figure out a terminal name for
+# itself, it first looks for an entry named "screen.<term>",
+# where <term> is the contents of your $TERM variable. If
+# no such entry exists, screen tries "screen" (or "screen-w"
+# if the terminal is wide (132 cols or more)). If even this
+# entry cannot be found, "vt100" is used as a substitute.
+#
+# Notwithstanding the manpage, screen uses its own notion of the termcap
+# and some keys from "screen.<term>" are ignored. Here is an entry which
+# covers those (tested with screen 4.00.02) -TD
+screen+fkeys|function-keys according to screen,
+ kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
+ khome=\E[1~, kslt@,
+#
+# Here are a few customized entries which are useful -TD
+#
+# Notes:
+# (a) screen does not support invis.
+# (b) screen's implementation of bw is incorrect according to tack.
+# (c) screen appears to hardcode the strings for khome/kend, making it
+# necessary to override the "use=" clause's values (screen+fkeys).
+# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
+# which is NOT the same as the terminfo screen.<term>.
+# (e) when screen finds one of these customized entries, it sets $TERM to
+# match. Hence, no "screen.xterm" entry is provided, since that would
+# create heartburn for people running remote xterm's.
+#
+# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
+# since the default translations override the built-in keycode
+# translation. They are suppressed here to show what is tested by tack.
+screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
+ bce@, bw,
+ invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
+ use=screen+fkeys, use=xterm-new,
+# xterm-r6 does not really support khome/kend unless it is propped up by
+# the translations resource.
+screen.xterm-r6|screen customized for X11R6 xterm,
+ bw, use=screen+fkeys, use=xterm-r6,
+# Color applications running in screen and TeraTerm do not play well together
+# on Solaris because Sun's curses implementation gets confused.
+screen.teraterm|disable ncv in teraterm,
+ ncv#127,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ use=screen+fkeys, use=screen,
+# Other terminals
+screen.rxvt|screen in rxvt,
+ bw,
+ cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
+ use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
+# fix the backspace key
+screen.linux|screen in linux console,
+ bw,
+ kbs=\177, kcbt@, use=screen+fkeys, use=screen,
+screen.mlterm|screen in mlterm,
+ use=screen+fkeys, use=mlterm,
+
+screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
+ cols#132, use=screen,
+
+screen2|old VT 100/ANSI X3.64 virtual terminal,
+ cols#80, it#8, lines#24,
+ cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
+ kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
+ nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
+ rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
+ smso=\E[3m, smul=\E[4m, tbc=\E[3g,
+# (screen3: removed unknown ":xv:LP:G0:" -- esr)
+screen3|older VT 100/ANSI X3.64 virtual terminal,
+ km, mir, msgr,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
+ rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
+ sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
+ smul=\E[4m, tbc=\E[3g,
+
+# Francesco Potorti <F.Potorti@cnuce.cnr.it>:
+# NCSA telnet is one of the most used telnet clients for the Macintosh. It has
+# been maintained until recently by the National Center for Supercomputer
+# Applications, and it is feature rich, stable and free. It can be downloaded
+# from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
+# xterm+sl, and the docs at NCSA. It works well.
+#
+# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
+# The terminal options should be set as follows:
+# Xterm sequences ON
+# use VT wrap mode ON
+# use Emacs arrow keys OFF
+# CTRL-COMND is Emacs meta ON
+# 8 bit mode ON
+# answerback string: "ncsa-vt220-8"
+# setup keys: all disabled
+#
+# Application mode is not used.
+#
+# Other special mappings:
+# Apple VT220
+# HELP Find
+# HOME Insert here
+# PAGEUP Remove
+# DEL Select
+# END Prev Screen
+# PAGEDOWN Next Screen
+#
+# Though it supports ANSI color, NCSA Telnet uses color to represent blinking
+# text.
+#
+# The status-line manipulation is a mapping of the xterm-compatible control
+# sequences for setting the window-title. So you must use tsl and fsl in
+# pairs, since the latter ends the string that is loaded to the window-title.
+ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
+ am, hs, km, mir, msgr, xenl,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
+ flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
+ il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
+ is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
+ kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
+ kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
+ kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
+ khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
+ rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
+ rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
+ smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
+ u8=\E[?62;1;6c, use=ansi+enq,
+ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
+ use=ncsa-m, use=klone+color,
+ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
+ hs@,
+ dsl@, fsl@, tsl@, use=ncsa,
+ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
+ hs@,
+ dsl@, fsl@, tsl@, use=ncsa-m,
+# alternate -TD:
+# The documented function-key mapping refers to the Apple Extended Keyboard
+# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
+# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
+# some keyboards and many applications require these as F1-F4.
+#
+ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
+ kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
+ kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, use=ncsa,
+
+#### Pilot Pro Palm-Top
+#
+# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
+# http://www.ai/~iang/TGssh/
+pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
+ OTbs, am, xenl,
+ cols#39, lines#16,
+ bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
+ cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
+ ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
+ rmso=\EB, smso=\Eb,
+
+# From: Federico Bianchi <bianchi@www.arte.unipi.it>
+# These entries are for the Embeddable Linux Kernel System (ELKS)
+# project - an heavily stripped down Linux to be run on 16 bit
+# boxes or, eventually, to be used in embedded systems - and have been
+# adapted from the stock ELKS termcap. The project itself looks stalled,
+# and the latest improvements I know of date back to March 2000.
+#
+# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
+# as an added bonus, this deals with all the capabilities common to
+# both VT52 and ANSI (or, eventually, "special") modes.
+
+elks-glasstty|ELKS glass-TTY capabilities,
+ OTbs, am,
+ cols#80, it#8, lines#25,
+ bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
+ nel=^M^J,
+
+elks-vt52|ELKS vt52 console,
+ clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
+ home=\EH, use=elks-glasstty,
+
+elks-ansi|ELKS ANSI console,
+ clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
+ rmso=\E[m, smso=\E[7m, use=elks-glasstty,
+
+# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
+# instead of VT52, but the "elks" entry still refers to the latter.
+
+elks|default ELKS console,
+ use=elks-vt52,
+
+# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
+# one but in screen size
+
+sibo|ELKS SIBO console,
+ cols#61, it#8, lines#20, use=elks-vt52,
+
+######## COMMERCIAL WORKSTATION CONSOLES
+#
+
+#### Alpha consoles
+#
+
+# This is from the OSF/1 Release 1.0 termcap file
+pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
+ am, xon,
+ cols#80, lines#25,
+ bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
+ nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
+
+#### Sun consoles
+#
+
+# :is1: resets scrolling region in case a previous user had used "tset vt100"
+oldsun|Sun Microsystems Workstation console,
+ OTbs, am, km, mir, msgr,
+ cols#80, it#8, lines#34,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
+ rmso=\E[m, sgr0=\E[m, smso=\E[7m,
+# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
+# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
+# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
+sun-il|Sun Microsystems console with working insert-line,
+ am, km, msgr,
+ cols#80, lines#34,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
+ kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
+ kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
+ kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
+ knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
+ kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
+ sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m,
+ u8=\E[1t, u9=\E[11t,
+# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
+# flake out on the last line. Unfortunately, without them the terminal has no
+# way to scroll.
+sun-cgsix|sun-ss5|Sun SparcStation 5 console,
+ il@, il1@, use=sun-il,
+# If you are using an SS5, change the sun definition to use sun-ss5.
+sun|sun1|sun2|Sun Microsystems Inc. workstation console,
+ use=sun-il,
+
+# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
+sun-s|Sun Microsystems Workstation window with status line,
+ hs,
+ dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
+sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
+ hs,
+ dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
+sun-48|Sun 48-line window,
+ cols#80, lines#48, use=sun,
+sun-34|Sun 34-line window,
+ cols#80, lines#34, use=sun,
+sun-24|Sun 24-line window,
+ cols#80, lines#24, use=sun,
+sun-17|Sun 17-line window,
+ cols#80, lines#17, use=sun,
+sun-12|Sun 12-line window,
+ cols#80, lines#12, use=sun,
+sun-1|Sun 1-line window for sysline,
+ eslok, hs,
+ cols#80, lines#1,
+ dsl=^L, fsl=\E[K, tsl=^M, use=sun,
+sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
+ ich1@, rmir@, smir@, use=sun,
+sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
+ lines#35,
+ rmcup=\E[>4h, smcup=\E[>4l, use=sun,
+sun-type4|Sun Workstation console with type 4 keyboard,
+ kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
+ kcuu1=\E[215z, use=sun-il,
+
+# Most of the current references to sun-color are from users wondering why this
+# is the default on install. Details from reading the wscons manpage, adding
+# cub, etc., here (rather than in the base sun-il entry) since it is not clear
+# when those were added -TD
+sun-color|Sun Microsystems Workstation console with color support (IA systems),
+ colors#8, pairs#64,
+ cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
+ cuu=\E[%p1%dA, home=\E[H, op=\E[m\E[p, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ use=sun,
+
+#### Iris consoles
+#
+
+# (wsiris: this had extension capabilities
+# :HS=\E7F2:HE=\E7F7:\
+# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
+# See the note on Iris extensions near the end of this file.
+# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
+# <flash> from BRL -- esr)
+wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
+ OTbs, OTnc, OTpt, am,
+ OTkn#3, cols#80, it#8, lines#40,
+ OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
+ cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+ cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
+ flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
+ ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
+ kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
+ rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
+ smul=\E7R2\E9P,
+
+#### NeWS consoles
+#
+# Console terminal windows under the NeWS (Sun's Display Postscript windowing
+# environment). Note: these have nothing to do with Sony's News workstation
+# line.
+#
+
+# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
+# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
+psterm|psterm-basic|NeWS psterm-80x34,
+ OTbs, am, hs, km, ul,
+ cols#80, it#8, lines#34,
+ blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
+ cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
+ dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
+ home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
+ ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
+ sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
+ tsl=\EOl,
+psterm-96x48|NeWS psterm 96x48,
+ cols#96, lines#48, use=psterm,
+psterm-90x28|NeWS psterm 90x28,
+ cols#90, lines#28, use=psterm,
+psterm-80x24|NeWS psterm 80x24,
+ cols#80, lines#24, use=psterm,
+# This is a faster termcap for psterm. Warning: if you use this termcap,
+# some control characters you type will do strange things to the screen.
+# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
+psterm-fast|NeWS psterm fast version (flaky ctrl chars),
+ OTbs, am, hs, km, ul,
+ cols#80, it#8, lines#34,
+ blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
+ cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
+ dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
+ il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
+ rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
+ smso=^Oo, smul=^Ou, tsl=^Ol,
+
+#### NeXT consoles
+#
+# Use `glasstty' for the Workspace application
+#
+
+# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
+next|NeXT console,
+ am, xt,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
+ ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
+ rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
+nextshell|NeXT Shell application,
+ am,
+ cols#80,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
+ kcud1=^J, nel=^M^J,
+
+#### Sony NEWS workstations
+#
+
+# (news-unk: this had :KB=news: -- esr)
+news-unk|SONY NEWS vt100 emulator common entry,
+ OTbs, OTpt, am, xenl,
+ cols#80,
+ OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
+ cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
+ is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
+ kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
+ sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+#
+# (news-29: this had :TY=ascii: --esr)
+news-29,
+ lines#29, use=news-unk,
+# (news-29-euc: this had :TY=euc: --esr)
+news-29-euc,
+ use=news-29,
+# (news-29-sjis: this had :TY=sjis: --esr)
+news-29-sjis,
+ use=news-29,
+#
+# (news-33: this had :TY=ascii: --esr)
+news-33,
+ lines#33, use=news-unk,
+# (news-33-euc: this had :TY=euc: --esr)
+news-33-euc,
+ use=news-33,
+# (news-33-sjis: this had :TY=sjis: --esr)
+news-33-sjis,
+ use=news-33,
+#
+# (news-42: this had :TY=ascii: --esr)
+news-42,
+ lines#42, use=news-unk,
+# (news-42-euc: this had :TY=euc: --esr)
+news-42-euc,
+ use=news-42,
+# (news-42-sjis: this had :TY=sjis: --esr)
+news-42-sjis,
+ use=news-42,
+#
+# NEWS-OS old termcap entry
+#
+# (news-old-unk: this had :KB=news:TY=sjis: --esr)
+news-old-unk|SONY NEWS vt100 emulator common entry,
+ OTbs, OTpt, am, xenl,
+ cols#80, vt#3,
+ OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
+ cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+#
+# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
+nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
+ OTbs,
+ lines#40,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
+ use=news-old-unk,
+#
+# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
+nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
+ lines#42,
+ is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
+ use=news-old-unk,
+#
+# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
+nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
+ OTbs,
+ lines#40,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
+ use=news-old-unk,
+#
+# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
+nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
+ OTbs,
+ lines#31,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
+ use=news-old-unk,
+#
+# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
+# also the alias vt100-bm.
+nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
+ OTbs,
+ lines#33,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
+ use=news-old-unk,
+#
+# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
+nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
+ OTbs,
+ lines#31,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
+ use=news-old-unk,
+#
+# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
+news28|sony vt100 emulator 28 lines,
+ OTbs,
+ lines#28,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
+ use=news-old-unk,
+#
+# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
+news29|news28-a|sony vt100 emulator 29 lines,
+ lines#29,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
+ use=news-old-unk,
+#
+# (news511: this had :TY=sjis: --esr)
+nwp511|nwp-511|nwp-511 vt100,
+ OTbs, OTpt, am, xenl,
+ cols#80, lines#24,
+ clear=\E[;H\E[2J$<20/>, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
+ ed=\E[J$<30/>, el=\E[K$<3/>,
+ flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
+ il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
+ ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
+ rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
+ smso=\E[7m$<2/>, smul=\E[4m$<2/>,
+# (news517: this had :TY=sjis:. --esr)
+nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
+ eslok, hs,
+ cols#80, lines#30,
+ OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
+ is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ tsl=\E[1$}\E[;%df, use=vt200,
+# (news517-w: this had :TY=sjis:. --esr)
+nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
+ eslok, hs,
+ cols#132, lines#50,
+ OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
+ is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
+ tsl=\E[1$}\E[;%df, use=vt200,
+
+#### Common Desktop Environment
+#
+
+# This ships with Sun's CDE in Solaris 2.5
+# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
+dtterm|CDE desktop terminal,
+ am, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, lm#0, ncv@,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
+ sc=\E7,
+ sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
+
+#### Non-Unix Consoles
+#
+
+### EMX termcap.dat compatibility modes
+#
+# Keypad: Home=\0G Up=\0H PrPag=\0I
+# ka1,kh kcuu1 kpp,ka3
+#
+# Left=\0K 5=\0L Right=\0M
+# kcub1 kb2 kcuf1
+#
+# End=\0O Down=\0P NxPag=\0Q
+# kc1,kend kcud1 kc3,knp
+#
+# Ins=\0R Del=\0S
+# kich1 kdch1
+#
+# On keyboard with 12 function keys,
+# shifted f-keys: F13-F24
+# control f-keys: F25-F36
+# alt f-keys: F37-F48
+# The shift/control/alt keys do not modify each other, but alt overrides both,
+# and control overrides shift.
+#
+# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
+# no_color_video to inform the application that standout(1), underline(2)
+# reverse(4) and invisible(64) don't work with color.
+emx-base|DOS special keys,
+ bce, bw,
+ it#8, ncv#71,
+ bel=^G, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
+ kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
+ kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
+ kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
+ kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
+ kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
+ kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
+ kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
+ kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
+ kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
+ kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
+ kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
+ use=ansi.sys,
+
+# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
+# a Unix-style environment used on OS/2. (Note that the suffix makes some
+# names longer than 14 characters, the nominal maximum).
+#
+# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
+ansi-emx|ANSI.SYS color,
+ am, bce, eo, mir, msgr, xon,
+ colors#8, cols#80, it#8, lines#25, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
+ cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
+ home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
+ kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
+ rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
+ rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
+ smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
+ u9=\E[c, use=emx-base,
+# nice colors for Emacs (white on blue, mode line white on cyan)
+ansi-color-2-emx|ANSI.SYS color 2,
+ clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
+ rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
+ setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
+ smul=\E[1;36;44m, use=ansi-emx,
+# nice colors for Emacs (white on black, mode line black on cyan)
+ansi-color-3-emx|ANSI.SYS color 3,
+ clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
+ rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
+ setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
+ smul=\E[0;36;40m, use=ansi-emx,
+mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
+ am,
+ cols#80, it#8, lines#24,
+ clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
+ ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
+ kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
+ kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
+ kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
+ sgr0=\E[0m,
+
+# Use this for cygwin32 (tested with beta 19.1)
+# underline is colored bright magenta
+# shifted kf1-kf12 are kf11-kf22
+cygwinB19|ansi emulation for cygwin32,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
+ use=ansi.sys,
+
+# Use this for cygwin (tested with version 1.1.0).
+# I've combined pcansi and linux. Some values of course were different and
+# I've indicated which of these were and which I used.
+# Cheers, earnie_boyd@yahoo.com
+# several changes based on running with tack and comparing with older entry -TD
+# more changes from csw:
+# add cbt [backtab]
+# remove eo [erase overstrike with blank]
+# change clear was \E[H\E[J now \E[2J (faster?)
+# remove cols
+# remove lines
+# remove ncv#3 [colors collide with highlights, bitmask] not applicable
+# to MSDOS box?
+# add cub [cursor back param]
+# add cuf [cursor forward param]
+# add cuu [cursor up param]
+# add cud [cursor down param]
+# add hs [has status line]
+# add fsl [return from status line]
+# add tsl [go to status line]
+# add smacs [Start alt charset] (not sure if this works)
+# add rmacs [End alt charset] (ditto)
+# add smcup [enter_ca_mode] (save console; thanks Corinna)
+# add rmcup [exit_ca_mode] (restore console; thanks Corinna)
+# add kb2 [center of keypad]
+# add u8 [user string 8] \E[?6c
+# add el [clear to end of line] \E[K
+# Notes:
+# cnorm [make cursor normal] not implemented
+# flash [flash] not implemented
+# blink [blink] not implemented very usefully in cygwin? \E[5m
+# dim [dim] not implemented very usefully in cygwin? \E[2m
+# cub1 [cursor back 1] typically \E[D, but ^H is faster?
+# kNXT [shifted next key] not implemented
+# kPRV [shifted prev key] not implemented
+# khome [home key] really is \E[1~ NOT \E[H
+# tbc [clear tab stops] not implemented
+# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
+# smpch [Start PC charset] is \E[11m, same as smacs
+# rmpch [End PC charset] is \E[10m, same as rmacs
+# mir [move in insert mode] fails in tack?
+# bce [back color erase] causes problems with change background color?
+# cvvis [make cursor very visible] causes a stackdump when testing with
+# testcurs using the output option? \E[?25h\E[?8c
+# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
+# ech [erase characters param] broken \E[%p1%dX
+# kcbt [back-tab key] not implemented in cygwin? \E[Z
+#
+# 2005/11/12 -TD
+# Remove cbt since it does not work in current cygwin
+# Add 'mir' and 'in' flags based on tack
+cygwin|ansi emulation for Cygwin,
+ am, hs, mir, msgr, xon,
+ colors#8, it#8, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
+ cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
+ nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
+ rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
+ sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
+ smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
+ vpa=\E[%i%p1%dd, use=vt102+enq,
+
+# I've supplied this so that you can help test new values and add other
+# features. Cheers, earnie_boyd@yahoo.com.
+#
+# Some features are from pcansi. The op value is from linux. Function-keys
+# are from linux. These have been tested not to cause problems. xenl was in
+# this list, but DOES cause problems so it has been removed
+cygwinDBG|Debug Version for Cygwin,
+ am, eo, mir, msgr, xon,
+ colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
+ kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
+ kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
+ rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
+ rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[2g, vpa=\E[%i%p1%dd, use=vt102+enq,
+
+# Key definitions:
+# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
+# encodings used by other x86 environments. All others are invented for DJGPP.
+# Oddly enough, while several combinations of modifiers are tabulated, there is
+# none for shifted cursor keys.
+#
+# F1 \E[[A
+# F2 \E[[B
+# F3 \E[[C
+# F4 \E[[D
+# F5 \E[[E
+# F6 \E[17~
+# F7 \E[18~
+# F8 \E[19~
+# F9 \E[20~
+# F10 \E[21~
+# F11 \E[23~
+# F12 \E[24~
+#
+# Delete \E[3~
+# Down Arrow \E[B
+# End \E[4~
+# Home \E[1~
+# Insert \E[2~
+# Left Arrow \E[D
+# Page Down \E[6~
+# Page Up \E[5~
+# Right Arrow \E[C
+# Up Arrow \E[A
+#
+# Shift-F1 \E[25~
+# Shift-F2 \E[26~
+# Shift-F3 \E[27~
+# Shift-F4 \E[28~
+# Shift-F5 \E[29~
+# Shift-F6 \E[30~
+# Shift-F7 \E[31~
+# Shift-F8 \E[32~
+# Shift-F9 \E[33~
+# Shift-F10 \E[34~
+# Shift-F11 \E[35~
+# Shift-F12 \E[36~
+#
+# Ctrl-F1 \E[47~
+# Ctrl-F2 \E[48~
+# Ctrl-F3 \E[49~
+# Ctrl-F4 \E[50~
+# Ctrl-F5 \E[51~
+# Ctrl-F6 \E[52~
+# Ctrl-F7 \E[53~
+# Ctrl-F8 \E[54~
+# Ctrl-F9 \E[55~
+# Ctrl-F10 \E[56~
+# Ctrl-F11 \E[57~
+# Ctrl-F12 \E[58~
+#
+# Ctrl-Delete \E[43~
+# Ctrl-Down Arrow \E[38~
+# Ctrl-End \E[44~
+# Ctrl-Home \E[41~
+# Ctrl-Insert \E[42~
+# Ctrl-Left Arrow \E[39~
+# Ctrl-Page Down \E[46~
+# Ctrl-Page Up \E[45~
+# Ctrl-Right Arrow \E[40~
+# Ctrl-Up Arrow \E[37~
+#
+# Alt-F1 \E[59~
+# Alt-F2 \E[60~
+# Alt-F3 \E[61~
+# Alt-F4 \E[62~
+# Alt-F5 \E[63~
+# Alt-F6 \E[64~
+# Alt-F7 \E[65~
+# Alt-F8 \E[66~
+# Alt-F9 \E[67~
+# Alt-F10 \E[68~
+# Alt-F11 \E[79~
+# Alt-F12 \E[80~
+#
+# Alt-Delete \E[65~
+# Alt-Down Arrow \E[60~
+# Alt-End \E[66~
+# Alt-Home \E[41~
+# Alt-Insert \E[64~
+# Alt-Left Arrow \E[61~
+# Alt-Page Down \E[68~
+# Alt-Page Up \E[67~
+# Alt-Right Arrow \E[62~
+# Alt-Up Arrow \E[59~
+#
+# Also:
+# Alt-A \E[82~
+# Alt-B \E[82~
+# Alt-C \E[83~
+# Alt-D \E[84~
+# Alt-E \E[85~
+# Alt-F \E[86~
+# Alt-G \E[87~
+# Alt-H \E[88~
+# Alt-I \E[89~
+# Alt-J \E[90~
+# Alt-K \E[91~
+# Alt-L \E[92~
+# Alt-M \E[93~
+# Alt-N \E[94~
+# Alt-O \E[95~
+# Alt-P \E[96~
+# Alt-Q \E[97~
+# Alt-R \E[98~
+# Alt-S \E[99~
+# Alt-T \E[100~
+# Alt-U \E[101~
+# Alt-V \E[102~
+# Alt-W \E[103~
+# Alt-X \E[104~
+# Alt-Y \E[105~
+# Alt-Z \E[106~
+djgpp|ansi emulation for DJGPP alpha,
+ am, bce, msgr, xhp, xon, xt,
+ colors#8, it#8, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
+ clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
+ kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
+ op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
+ sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
+
+djgpp203|Entry for DJGPP 2.03,
+ OTbs, am,
+ cols#80, it#8, lines#25,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
+ kcud1=^J, nel=^M^J,
+
+djgpp204|Entry for DJGPP 2.04,
+ OTbs, am, AX,
+ colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
+ clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
+ kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+ kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
+ ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+
+# This is tested using U/Win's telnet. Scrolling is omitted because it is
+# buggy. Another odd bug appears when displaying "~" in alternate character
+# set (the emulator spits out error messages). Compare with att6386 -TD
+uwin|U/Win 3.2 console,
+ am, eo, in, msgr, xenl, xon,
+ colors#8, it#8, ncv#58, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
+ ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
+ kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
+ khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
+ rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
+ rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
+ smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+
+# This entry fits the Windows NT console when the _POSIX_TERM environment
+# variable is set to 'on'. While the Windows NT POSIX console is seldom used,
+# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
+# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
+# systems is not, and (surprise!) they match very well.
+#
+# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
+# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
+# are the installation instructions a pile of mind-numbing bureaucratese,
+# but the termcap entry is actually broken and unusable as given; the :do:
+# capability is misspelled "d".
+#
+# To use this, you need to a bunch of environment variables:
+#
+# SET _POSIX_TERM=on
+# SET TERM=ansi
+# SET TERMCAP=location of termcap file in POSIX file format
+# which is case-sensitive.
+# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
+# SET TMP=//C/TEMP
+#
+# Important note: setting the TMP environment variable in POSIX style renders
+# it incompatible with a lot of other applications, including Visual C++. So
+# you should have a separate command window just for vi. All the other
+# variables may be permanently set in the Control Panel\System applet.
+#
+# You can find out more about the restrictions of this facility at
+# <http://www.nentug.org/unix-to-nt/ntposix.htm>.
+#
+# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
+ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
+ am, bw, msgr,
+ cols#80, it#8, lines#25,
+ bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
+ kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
+ ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
+# From: jew@venus.sunquest.com
+# Date: 19 Feb 93 23:41:07 GMT
+# Here's a combination of ansi and vt100 termcap
+# entries that works nearly perfectly for me
+# (Gateway 2000 Handbook and Microsoft Works 3.0):
+pcmw|PC running Microsoft Works,
+ am, xenl,
+ cols#80, it#8, lines#24, vt#3,
+ bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
+ clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
+ cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
+ cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
+ ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
+ rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
+ ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
+ tbc=\E[3g$<2/>,
+
+# From: Federico Bianchi
+# This is the entry for the OpenNT terminal.
+# The ntconsole name is for backward compatability.
+# This is for OpenNT 2.0 and later.
+# Later OpenNT was renamed to Interix.
+#
+# Presently it is distributed by Microsoft as Services For Unix (SFU).
+# The 3.5 beta contains ncurses 4.2 (that is header files and executables,
+# the documentation dates from 1.9.9e) -TD
+
+interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
+ am, bw, msgr,
+ colors#8, cols#80, lines#25, ncv#3, pairs#64,
+ acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\,\021+^P0\333p\304r\304y\363z\362{\343|\330}\234,
+ bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
+ kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
+ kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
+ kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
+ kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
+ kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
+ kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
+ kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
+ kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
+ kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
+ kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
+ kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
+ kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
+ kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
+ kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
+ op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
+ rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
+ sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
+ sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[1m, smul=\E[4m,
+
+opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
+ lines#35, use=opennt,
+
+opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
+ lines#50, use=opennt,
+
+opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
+ lines#60, use=opennt,
+
+opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
+ lines#100, use=opennt,
+
+# OpenNT wide terminals
+opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
+ cols#125, use=opennt,
+
+opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
+ lines#35, use=opennt-w,
+
+opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
+ lines#50, use=opennt-w,
+
+opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
+ lines#60, use=opennt-w,
+
+opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
+ cols#132, use=opennt,
+
+# OpenNT terminals with no smcup/rmcup (names match termcap entries)
+interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
+ rmcup@, smcup@, use=opennt,
+
+opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
+ lines#35, use=opennt-nti,
+
+opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
+ lines#50, use=opennt-nti,
+
+opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
+ lines#60, use=opennt-nti,
+
+opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
+ lines#100, use=opennt-nti,
+
+######## COMMON TERMINAL TYPES
+#
+# This section describes terminal classes and maker brands that are still
+# quite common, but have proprietary command sets not blessed by ANSI.
+#
+
+#### Altos
+#
+# Altos made a moderately successful line of UNIX boxes. In 1990 they were
+# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
+# Acer has a web site at http://www.acer.com.
+#
+# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
+# His comments suggest they were shipped with the system.
+#
+
+# (altos2: had extension capabilities
+# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
+# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
+# :HL=^AP\r:SP=\E[i:\
+# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
+# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
+# Comparison with the k* capabilities makes it obvious that the c* things are
+# shift keys. I have renamed them to keys 32 and up accordingly. Also,
+# :sr: was given as a boolean-- esr)
+altos2|alt2|altos-2|altos II,
+ cols#80, it#8, lines#24, xmc#0,
+ clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
+ if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
+ kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
+ kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
+ kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
+ kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
+ kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
+ nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+ smam=\E[?7h, smso=\E[7m, smul=\E[4m,
+# (altos3: had extension capabilities
+# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
+# :HL=^AP\r:SP=\E[i:\
+# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
+altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
+ blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
+altos4|alt4|altos-4|altos IV,
+ use=wy50,
+# (altos7: had extension capabilities:
+# :GG#0:GI=\EH8:GF=\EH7:\
+# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+# Comparison with the k* capabilities makes it obvious that the c* things are
+# shift keys. I have renamed them to keys 32 and up accordingly. I have
+# also made this entry relative to adm12 in order to give it an <sgr>. The
+# <invis> imported by use=adm+sgr may work, let me know. -- esr)
+altos7|alt7|altos VII,
+ am, mir,
+ cols#80, lines#24, xmc#0,
+ acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
+ clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
+ ind=^J, invis=\EG1,
+ is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
+ kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
+ kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
+ kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
+ kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
+ kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
+ kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
+ knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
+ rmir=\Er, smir=\Eq, use=adm+sgr,
+altos7pc|alt7pc|altos PC VII,
+ kend=\ET, use=altos7,
+
+#### Hewlett-Packard (hp)
+#
+# Hewlett-Packard
+# 8000 Foothills Blvd
+# Roseville, CA 95747
+# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
+# 1-(800)-633-3600 (General customer support)
+#
+#
+# As of March 1998, HP no longer has any terminals in production.
+# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
+# supported (they still have parts). So are the 2392a and 2394a.
+# See the WORKSTATION CONSOLES section for the 700s.
+#
+
+# Generic HP terminal - this should (hopefully) work on any HP terminal.
+hpgeneric|hp|hewlett-packard generic terminal,
+ OTbs, OTpt, am, da, db, mir, xhp,
+ cols#80, lines#24, lm#0, vt#6,
+ bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
+ ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
+ ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
+ sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
+ vpa=\E&a%p1%dY,
+
+hp110|hewlett-packard model 110 portable,
+ lines#16, use=hpgeneric,
+
+hp+pfk+cr|hp function keys with CR,
+ kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
+ kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
+
+hp+pfk-cr|hp function keys w/o CR,
+ kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
+ kf8=\Ew,
+
+# The hp2621s use the same keys for the arrows and function keys,
+# but not separate escape sequences. These definitions allow the
+# user to use those keys as arrow keys rather than as function
+# keys.
+hp+pfk+arrows|hp alternate arrow definitions,
+ kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
+ kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
+ kll=\Eq\r, kri=\Es\r,
+
+hp+arrows|hp arrow definitions,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
+ kind=\ES, kll=\EF, kri=\ET,
+
+# Generic stuff from the HP 262x series
+#
+hp262x|HP 262x terminals,
+ xhp,
+ blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
+ invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
+ kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
+ krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
+ sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
+ sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
+
+# Note: no <home> on HPs since that homes to top of memory, not screen.
+# Due to severe 2621 braindamage, the only way to get the arrow keys to
+# transmit anything at all is to turn on the function key labels
+# with <smkx>, and even then the user has to hold down shift!
+# The default 2621 turns off the labels except when it has to to
+# enable the function keys. If your installation prefers labels
+# on all the time, or off all the time (at the "expense" of the
+# function keys), use 2621-nl or 2621-wl.
+#
+# Note: there are newer ROMs for 2621's that allow you to set
+# strap A so the regular arrow keys xmit \EA, etc, as with the
+# 2645. However, even with this strap set, the terminal stops
+# xmitting if you reset it, until you unset and reset the strap!
+# Since there is no way to set/unset the strap with an escape
+# sequence, we don't use it in the default.
+# If you like, you can use 2621-ba (brain-damaged arrow keys).
+hp2621-ba|2621 w/new rom and strap A set,
+ rmkx@, smkx@, use=hp+arrows, use=hp2621,
+
+# hp2621 with function labels. Most of the time they are off,
+# but inside vi, the function key labels appear. You have to
+# hold down shift to get them to xmit.
+hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
+ is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
+hp2621-fl|hp 2621,
+ xhp@, xon,
+ pb#19200,
+ cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
+ ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
+ sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
+ use=hp+pfk+cr, use=hpgeneric,
+
+# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
+hp2621p|hp 2621 with printer,
+ mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
+
+hp2621p-a|hp2621p with fn as arrows,
+ use=hp+pfk+arrows, use=hp2621p,
+
+# hp2621 with k45 keyboard
+hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
+ kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
+
+# 2621 using all 48 lines of memory, only 24 visible at any time.
+hp2621-48|48 line 2621,
+ lines#48,
+ cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
+ use=hp2621,
+
+# 2621 with no labels ever. Also prevents vi delays on escape.
+hp2621-nl|hp 2621 with no labels,
+ kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
+ use=hp2621-fl,
+
+# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
+# (wrong).
+#
+hp2621-nt|hp 2621 w/no tabs,
+ ht@, use=hp2621,
+
+# Hp 2624 B with 4 or 10 pages of memory.
+#
+# Some assumptions are made with this entry. These settings are
+# NOT set up by the initialization strings.
+#
+# Port Configuration
+# RecvPace=Xon/Xoff
+# XmitPace=Xon/Xoff
+# StripNulDel=Yes
+#
+# Terminal Configuration
+# InhHndShk=Yes
+# InhDC2=Yes
+# XmitFnctn(A)=No
+# InhEolWrp=No
+#
+# Note: the 2624 DOES have a true <home>, believe it or not!
+#
+# The 2624 has an "error line" to which messages can be sent.
+# This is CLOSE to what is expected for a "status line". However,
+# after a message is sent to the "error line", the next carriage
+# return is EATEN and the "error line" is turned back off again!
+# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
+#
+# This entry supports emacs (and any other program that uses raw
+# mode) at 4800 baud and less. I couldn't get the padding right
+# for 9600.
+#
+# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
+hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
+ da, db,
+ lm#96,
+ flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
+ use=hp+labels, use=scrhp,
+
+# This hp2626 entry does not use any of the fancy windowing stuff
+# of the 2626.
+#
+# Indeed, terminfo does not yet handle such stuff. Since changing
+# any window clears memory, it is probably not possible to use
+# this for screen opt.
+#
+# ed is incredibly slow most of the time - I am guessing at the
+# exact padding. Since the terminal uses xoff/xon this is intended
+# only for cost computation, so that the terminal will prefer el
+# or even dl1 which is probably faster!
+#
+# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
+# extra slow on the last line of the window.
+#
+# The padding probably should be changed.
+#
+hp2626|hp2626a|hp2626p|hp 2626,
+ da, db,
+ lm#0, pb#19200,
+ ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
+ is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
+ use=hp+labels, use=scrhp,
+
+# This entry is for sysline. It allocates a 23 line window with
+# a 115 line workspace for regular use, and a 1 line window for
+# the status line.
+#
+# This assumes port 2 is being used.
+# Turn off horizontal line, Create ws #1 with 115 lines,
+# Create ws #2 with 1 line, Create window #1 lines 1-23,
+# Create window #2 lines 24-24, Attach cursor to workspace #1.
+# Note that this clears the tabs so it must be done by tset before
+# it sets the tabs.
+#
+hp2626-s|hp 2626 using only 23 lines,
+ eslok, hs,
+ lines#23,
+ fsl=\E&d@\E&w7f2p1I\E&w4f1I,
+ is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
+ tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
+# Force terminal back to 24 lines after being 23.
+hp2626-ns|hp 2626 using all 24 lines,
+ is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
+ use=hp2626,
+# Various entries useful for small windows on 2626.
+hp2626-12|hewlett-packard 2626 12 lines,
+ lines#12, use=hp2626,
+hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
+ cols#40, lines#12, use=hp2626,
+hp2626-x40|hewlett-packard 2626 40 columns,
+ cols#40, use=hp2626,
+hp2626-12-s|hewlett-packard 2626 11 lines plus status,
+ lines#11, use=hp2626-s,
+
+#
+# hp2627 color tubes from University of Wisconsin
+#
+hp2627a-rev|hp 2627 with reverse video colors,
+ cr=^M, cud1=^J, ht=^I, ind=^J,
+ is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
+ kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
+ smul=\E&dD\E&v1S, use=hp2621-nl,
+hp2627a|hp 2627 color terminal with no labels,
+ cr=^M, cud1=^J, ht=^I, ind=^J,
+ is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
+ kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
+ rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
+ use=hp2621-nl,
+hp2627c|hp 2627 color (cyan) terminal with no labels,
+ cr=^M, cud1=^J, ht=^I, ind=^J,
+ is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
+ kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
+
+# hp2640a doesn't have the Y cursor addressing feature, and C is
+# memory relative instead of screen relative, as we need.
+#
+hp2640a|hp 2640a,
+ cup@, rmkx@, smkx@, use=hp2645,
+
+hp2640b|hp2644a|hp 264x series,
+ rmkx@, smkx@, use=hp2645,
+
+# (hp2641a: removed unknown :gu: -- esr)
+hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
+ am, da, db, mir, xhp,
+ cols#80, lines#24,
+ bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
+ ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
+ if=/usr/share/tabset/std, il1=\EL, ind=^J,
+ is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
+ rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
+ vpa=\E&a%p1%2dY,
+
+# This terminal should be used at 4800 baud or less. It needs padding for
+# plain characters at 9600, I guessed at an appropriate cr delay. It really
+# wants ^E/^F handshaking, but that doesn't work well even if you write
+# software to support it.
+hp2645|hp45|HP 2645 series,
+ pb#9600,
+ blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
+ ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
+ kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
+ rmkx=\E&s0A,
+ sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
+ sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
+# You should use this terminal at 4800 baud or less.
+hp2648|hp2648a|HP 2648a graphics terminal,
+ clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
+ dch1=\EP$<7>, ip=$<5>, use=hp2645,
+
+# The HP 150 terminal is a fairly vanilla HP terminal, with the
+# clreol standout problem. It also has graphics capabilities and
+# a touch screen, which we don't describe here.
+hp150|hewlett packard Model 150,
+ OTbs, use=hp2622,
+
+# HP 2382a terminals, "the little ones." They don't have any
+# alternate character set support and sending out ^N/^O will
+# leave the screen blank.
+hp2382a|hp2382|hewlett packard 2382a,
+ da, db,
+ lh#1, lm#48,
+ acsc@,
+ pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
+ rmacs@,
+ sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
+ sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
+
+hp2621-a|hp2621a-a|hp2621 with fn as arrows,
+ use=hp+pfk+arrows, use=hp2621-fl,
+
+# newer hewlett packard terminals
+
+newhpkeyboard|generic entry for HP extended keyboard,
+ kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
+ kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
+ kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
+ use=hp+pfk-cr,
+
+newhp|generic entry for new hewlett packard terminals,
+ am, bw, mir, xhp, xon,
+ cols#80, lines#24, pb#4800,
+ acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
+ bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
+ cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
+ dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
+ invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
+ pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
+ pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
+ pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
+ rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
+ sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
+ sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
+ tbc=\E3, use=newhpkeyboard,
+
+memhp|memory relative addressing for new HP ttys,
+ vt#6,
+ clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
+ cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
+ home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
+ mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
+
+scrhp|screen relative addressing for new HP ttys,
+ clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
+ cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
+ cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
+ home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
+ mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
+
+# (hp+labels: added label values from a BRL termcap -- esr)
+hp+labels|"standard" label info for new HP ttys,
+ lh#2, lw#8, nlab#8,
+ lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
+ pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
+ rmln=\E&j@, smln=\E&jB,
+
+hp+printer|"standard" printer info for HP ttys,
+ ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
+
+
+# The new hp2621b is kind of a cross between the old 2621 and the
+# new 262x series of machines. It has dip-switched options.
+# The firmware has a bug in it such that if you give it a null
+# length label, the following character is eaten!
+hp2621b|hp 2621b with old style keyboard,
+ lh#1, lm#48, lw#8, nlab#8,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
+ kind=\ET, kll=\EF, kri=\ES,
+ pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
+ smln=\E&jB, use=hp2621,
+
+hp2621b-p|hp 2621b with printer,
+ use=hp+printer, use=hp2621b,
+
+# hp2621b - new 2621b with new extended keyboard
+# these are closer to the new 26xx series than the other 2621b
+hp2621b-kx|hp 2621b with extended keyboard,
+ use=newhpkeyboard, use=hp2621b,
+
+hp2621b-kx-p|hp 2621b with new keyboard & printer,
+ use=hp+printer, use=hp2621b-kx,
+
+# Some assumptions are made in the following entries.
+# These settings are NOT set up by the initialization strings.
+#
+# Port Configuration
+# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
+#
+# Terminal Configuration
+# InhHndShk(G)=Yes InhDC2(H)=Yes
+# XmitFnctn(A)=No InhEolWrp=No
+#
+#
+# Hp 2622a & hp2623a display and graphics terminals
+#
+hp2622|hp2622a|hp 2622,
+ da, db,
+ lm#0, pb#19200,
+ is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
+
+# The 2623 is a 2622 with extra graphics hardware.
+hp2623|hp2623a|hp 2623,
+ use=hp2622,
+
+hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
+ use=hp+printer, use=hp2624,
+
+# The hewlett packard B can have an optional extra 6 pages of memory.
+hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
+ lm#240, use=hp2624,
+
+hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
+ lm#240, use=hp2624b-p,
+
+# Color manipulations for HP terminals
+hp+color|hp with colors,
+ ccc,
+ colors#16, ncv#17, pairs#7,
+ initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
+ oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
+ op=\E&v0S, scp=\E&v%p1%dS,
+
+# <is2> sets the screen to be 80 columns wide
+hp2397a|hp2397|hewlett packard 2397A color terminal,
+ is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
+
+# HP 700/44 Setup parameters:
+# Terminal Mode HP-PCterm
+# Inhibit Auto Wrap NO
+# Status Line Host Writable
+# PC Character Set YES
+# Twenty-Five Line Mode YES
+# XON/XOFF @128 or 64 (sc)
+# Keycode Mode NO or YES (sc)
+# Backspace Key BS or BS/DEL
+#
+# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
+# \E\\? does not turn off keycode mode
+# <smsc> sets alternate start/stop; keycode on
+hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
+ am, eo, xenl, xon,
+ cols#80, lines#25,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
+ bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
+ cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
+ ind=^J,
+ is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
+ kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
+ kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
+ kpp=\E[5~, rmam=\E[?7l,
+ rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
+ smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
+ smul=\E[4m, xoffc=g, xonc=e,
+#
+# (hp2392: copied <rmir> here from hpex -- esr)
+hp2392|239x series,
+ cols#80,
+ cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
+ kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
+ kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
+ rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
+ use=hpsub,
+
+hpsub|hp terminals -- capability subset,
+ am, da, db, mir, xhp, xon,
+ lines#24,
+ bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
+ ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
+ is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
+ sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
+
+# hpex:
+# May be used for most 24 x 80 hp terminals,
+# but has no padding added, so may allow runover in some terminals at high
+# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
+# hp98x5 terminal emulators or hp98x6 consoles.
+# Adds xy-cursor addressing, vertical cursor addressing, home,
+# last line, and underline capabilities.
+#
+# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
+# moved <rmir> here from hpsub -- esr)
+hpex|hp extended capabilites,
+ cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
+ kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
+ smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
+
+# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
+hp2|hpex2|hewlett-packard extended capabilities newer version,
+ am, da, db, mir, xhp,
+ cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
+ bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
+ cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
+ il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
+ ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
+ kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
+ kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
+ krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
+ pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
+ pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
+ pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
+ pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
+ rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
+ sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
+ sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
+ smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+
+# HP 236 console
+# From: <ddavis@ic.berkeley.edu>
+hp236|hp236 internal terminal emulator,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=\EF, cnorm=\EDE, cub1=^H,
+ cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
+ dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
+ sgr0=\ECI, smso=\EBI,
+
+# This works on a hp300 console running Utah 4.3 BSD
+# From: Craig Leres <leres@okeeffe.berkeley.edu>
+hp300h|HP Catseye console,
+ OTbs, am, da, db, mir, xhp,
+ cols#128, lines#51, lm#0, xmc#0,
+ bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
+ cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
+ if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
+ rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
+ smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
+ vpa=\E&a%p1%dY,
+# From: Greg Couch <gregc@ernie.berkeley.edu>
+hp9837|hp98720|hp98721|HP 9000/300 workstations,
+ OTbs, am, da, db, mir, xhp,
+ cols#128, it#8, lines#46, lm#0,
+ bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
+ cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
+ il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
+ ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
+ kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
+ sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
+ tbc=\E3, vpa=\E&a%p1%dY,
+# HP 9845 desktop computer from BRL
+# (hp9845: removed unknown capability :gu: -- esr)
+hp9845|HP 9845,
+ OTbs, am, da, db, eo, mir, xhp,
+ cols#80, lines#21,
+ OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY,
+ cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
+ if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
+ smir=\EQ, smso=\E&dB,
+# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
+# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
+# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
+hp98550|hp98550a|HP 9000 Series 300 color console,
+ OTbs, am, da, db, mir, xhp,
+ cols#128, it#8, lines#49, lm#0,
+ acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
+ clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
+ dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
+ if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
+ kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
+ kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
+ khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
+ knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
+ rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
+ sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
+ smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+# From: Victor Duchovni <vic@fine.princeton.edu>
+# (hp700-wy: removed obsolete ":nl=^J:";
+# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
+hp700-wy|HP700/41 emulating wyse30,
+ OTbs, am, bw, mir, msgr,
+ cols#80, it#8, lines#24, xmc#1,
+ cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
+ if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
+ is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
+ kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
+ kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
+ ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
+ sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
+ smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
+hp70092|hp70092a|hp70092A|HP 700/92,
+ am, da, db, xhp,
+ cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
+ acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
+ bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
+ cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
+ dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
+ hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
+ ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
+ kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
+ kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
+ krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
+ rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
+ sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
+ smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+
+bobcat|sbobcat|HP 9000 model 300 console,
+ am, da, db, mir, xhp,
+ cols#128, it#8, lines#47, xmc#0,
+ cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
+ dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
+ il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
+ rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
+ smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
+gator-t|HP 9000 model 237 emulating extra-tall AAA,
+ lines#94, use=gator,
+gator|HP 9000 model 237 emulating AAA,
+ bw, km, mir, ul,
+ cols#128, it#8, lines#47,
+ bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
+ dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
+ ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
+ il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
+ rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+gator-52|HP 9000 model 237 emulating VT52,
+ cols#128, lines#47, use=vt52,
+gator-52t|HP 9000 model 237 emulating extra-tall VT52,
+ lines#94, use=gator-52,
+
+#### Honeywell-Bull
+#
+# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
+#
+
+# Honeywell Bull terminal. Its cursor and function keys send single
+# control characters and it has standout/underline glitch. Most programs
+# do not like these features/bugs. Visual bell is realized by flashing the
+# "keyboard locked" LED.
+dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
+ cols#80, lines#25,
+ clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
+ flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
+ kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
+dku7003|Honeywell Bull DKU 7003 all features described,
+ msgr,
+ xmc#1,
+ blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+ use=dku7003-dumb,
+
+#### Lear-Siegler (adm)
+#
+# These guys are long since out of the terminals business, but
+# in 1995 many current terminals still have an adm type as one of their
+# emulations (usually their stupidest, and usually labeled adm3, though
+# these `adm3' emulations normally have adm3a+ capabilities).
+#
+# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
+# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
+# was being held to ground would trigger a send of the top line on the screen.
+# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
+# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
+# for clearing up this point.)
+
+adm1a|adm1|lsi adm1a,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
+ ind=^J,
+adm2|lsi adm2,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
+ kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
+# (adm3: removed obsolete ":ma=^K^P:" -- esr)
+adm3|lsi adm3,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
+# The following ADM-3A switch settings are assumed for normal operation:
+# SPACE U/L_DISP CLR_SCRN 24_LINE
+# CUR_CTL LC_EN AUTO_NL FDX
+# Other switches may be set for operator convenience or communication
+# requirements. I recommend
+# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
+# ETX_OFF EOT_OFF
+# Most of these terminals required an option ROM to support lower case display.
+# Open the case and look at the motherboard; if you see an open 24-pin DIP
+# socket, you may be out of luck.
+#
+# (adm3a: some capabilities merged in from BRl entry -- esr)
+adm3a|lsi adm3a,
+ OTbs, am,
+ cols#80, lines#24,
+ OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
+ cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
+ kcuu1=^K, rs2=^N,
+adm3a+|adm3a plus,
+ kbs=^H, use=adm3a,
+# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
+adm5|lsi adm5,
+ xmc#1,
+ bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
+ rmso=\EG, smso=\EG, use=adm3a+,
+# A lot of terminals other than adm11s use these. Wherever you see
+# use=adm+sgr with some of its capabilities disabled, try the
+# disabled ones. They may well work but not have been documented or
+# expressed in the using entry. We'd like to cook up an <sgr> but the
+# <rmacs>/<smacs> sequences of the using entries vary too much.
+adm+sgr|adm style highlight capabilities,
+ invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
+ smso=\EG4, smul=\EG8,
+# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
+# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
+# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
+# be ^Z, according to his entry.
+# (adm11: <smul>=\EG4 was obviously erroneous because it also said
+# <rev>=\EG4. Looking at other ADMs confirms this -- esr)
+adm11|LSI ADM-11,
+ OTbs, am, hs,
+ OTkn#8, cols#80, lines#24,
+ OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
+ cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
+ kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
+ use=adm+sgr,
+# From: Andrew Scott Beals <bandy@lll-crg.ARPA>
+# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
+# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
+# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
+# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
+# via BRL. That entry asserted <xmc#1>, but I've left that out because
+# neither earlier nor later ADMSs have it -- esr)
+#
+# You will need to get into the supervisor setup before you can set
+# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
+# see a lot more setup options.
+#
+# While in supervisor setup you can also use following codes:
+#
+# Ctrl-P Personality character selections (configure for example what
+# arrow keys send, if I recall correctly)
+# Ctrl-T tabs 1-80 use left&right to move and up to set and
+# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
+# Ctrl-B Binary setup (probably not needed. I think that everything can
+# be set using normal setup)
+# Ctrl-A Answerback mode (enter answerback message)
+# Ctrl-U User friendly mode (normal setup)
+# Ctrl-D Defaults entire setup and function keys from EPROM tables
+# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
+# Ctrl-R Reads both setup and functions keys from NVM.
+# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
+#
+# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
+# RTS/CTS used nowadays with virtually every modem and computer. 19200
+# bps works fine with hardware flow control.
+#
+# The following null-modem cable should fix this and enable you to use
+# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
+# set ADM-12+ for DTR handshaking from supervisor setup.
+#
+# PC Serial ADM-12+
+# -------- -------
+# 2 - 3
+# 3 - 2
+# 4 - 5
+# 5 - 20
+# 6,8 - 4
+# 7 - 7
+# 20 - 6,8
+#
+adm12|lsi adm12,
+ OTbs, OTpt, am, mir,
+ OTug#1, cols#80, it#8, lines#24,
+ bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
+ is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
+ kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
+ kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
+ kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
+ use=adm+sgr,
+# (adm20: removed obsolete ":kn#7:" -- esr)
+adm20|lear siegler adm20,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
+ cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
+ kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
+ sgr0=\E(, smso=\E),
+adm21|lear siegler adm21,
+ xmc#1,
+ bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
+ ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
+ kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
+ use=adm3a,
+# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
+# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
+# removed bogus-looking \200 from before <cup>. -- esr)
+adm22|lsi adm22,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
+ is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
+ kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
+ lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
+# ADM 31 DIP Switches
+#
+# This information comes from two versions of the manual for the
+# Lear-Siegler ADM 31.
+#
+# Main board:
+# rear of case
+# +-||||-------------------------------------+
+# + S1S2 ||S +
+# + ||3 +
+# + +
+# + ||S +
+# + ||4 +
+# + +
+# + +
+# + +
+# + +
+# + +
+# +-+ +-+
+# + +
+# + S5 S6 S7 +
+# + == == == +
+# +----------------------------------------------+
+# front of case (keyboard)
+#
+# S1 - Data Rate - Modem
+# S2 - Data Rate - Printer
+# ------------------------
+# Data Rate Setting
+# -------------------
+# 50 0 0 0 0
+# 75 1 0 0 0
+# 110 0 1 0 0
+# 134.5 1 1 0 0
+# 150 0 0 1 0
+# 300 1 0 1 0
+# 600 0 1 1 0
+# 1200 1 1 1 0
+# 1800 0 0 0 1
+# 2000 1 0 0 1
+# 2400 0 1 0 1
+# 3600 1 1 0 1
+# 4800 0 0 1 1
+# 7200 1 0 1 1
+# 9600 0 1 1 1
+# x 1 1 1 1
+#
+# S3 - Interface/Printer/Attributes
+# ---------------------------------
+# Printer Busy Control
+# sw1 sw2 sw3
+# ---------------
+# off off off Busy not active, CD disabled
+# off off on Busy not active, CD enabled
+# off on off Busy active on J5-20, CD disabled
+# on off off Busy active on J5-19, CD disabled - Factory Set.
+# on off on Busy active on J5-19, CD enabled
+#
+# sw4 Used in conjuction with S4 for comm interface control - Fact 0
+#
+# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
+#
+# sw6 ON enables printer BUSY active LOW - Factory Setting
+# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
+#
+# sw7 ON - steady cursor - Factory Setting
+# OFF - blinking cursor
+#
+# sw8 ON causes selected attribute character to be displayed
+# OFF causes SPACE to be displayed instead - Factory Setting
+#
+# S4 - Interface
+# --------------
+# Modem Interface
+# S3 S4 S4 S4 S4
+# sw4 sw1 sw2 sw3 sw4
+# ---------------------------
+# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
+# Current Loop disabled - Factory Setting
+# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
+# disabled
+# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
+# Current Loop Disabled
+#
+# sw5 ON disables dot stretching mode - Factory Setting
+# OFF enables dot stretching mode
+# sw6 ON enables blanking function
+# OFF enables underline function - Factory Setting
+# sw7 ON causes NULLS to be displayed as NULLS
+# OFF causes NULLS to be displayed as SPACES - Factory Setting
+#
+# S5 - Word Structure
+# -------------------
+# sw1 ON enables BREAK key - Factory Setting
+# OFF disables BREAK key
+# sw2 ON selects 50Hz monitor refresh rate
+# OFF selects 60Hz monitor refresh rate - Factory Setting
+#
+# Modem Port Selection
+# sw3 sw4 sw5
+# ---------------
+# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
+# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
+# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
+# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
+# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
+# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
+# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
+# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
+#
+# sw6 ON sends bit 8 a 1 (mark)
+# OFF sends bit 8 as 0 (space) - Factory Setting
+# sw7 ON selects Block Mode
+# OFF selects Conversation Mode - Factory Setting
+# sw8 ON selects Full Duplex operation
+# OFF selects Half Duplex operation - Factory Setting
+#
+# S6 - Printer
+# ------------
+# sw1, sw2, sw6, sw7 Reserved - Factory 0
+#
+# Printer Port Selection
+# same as Modem above, bit 8 (when 8 DATA bits) is always = 0
+#
+# sw8 ON enables Printer Port
+# OFF disables Printer Port - Factory Setting
+#
+# S7 - Polling Address
+# --------------------
+# sw1-7 Establish ASCII character which designates terminal polling address
+# ON = logic 0
+# OFF = logic 1 - Factory Setting
+# sw8 ON enables Polling Option
+# OFF disables Polling Option - Factory Setting
+#
+#
+# On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
+#
+# This adm31 entry uses underline as the standout mode.
+# If the adm31 gives you trouble with standout mode, check the DIP switch in
+# position 6, bank @c11, 25% from back end of the circuit board. Should be
+# OFF. If there is no such switch, you have an old adm31 and must use oadm31.
+# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
+adm31|lsi adm31 with sw6 set for underline mode,
+ OTbs, am, mir,
+ cols#80, lines#24,
+ bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
+ kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
+ kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
+ kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
+ rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
+adm31-old|o31|old adm31,
+ rmul@, smso=\EG4, smul@, use=adm31,
+# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
+adm36|LSI ADM36,
+ OTbs, OTpt,
+ OTkn#4,
+ if=/usr/share/tabset/vt100,
+ is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
+ use=vt100,
+# (adm42: removed obsolete ":ma=^K^P:" -- esr)
+adm42|lsi adm42,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
+ il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
+ kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
+ smir=\Eq, smul@, use=adm+sgr,
+# The following termcap for the Lear Siegler ADM-42 leaves the
+# "system line" at the bottom of the screen blank (for those who
+# find it distracting otherwise)
+adm42-ns|lsi adm-42 with no system line,
+ cbt=\EI\EF \011, clear=\E;\EF \011,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
+ dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
+ el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
+ smir=\Eq\EF \011, use=adm42,
+# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
+# The insert mode of this terminal is commented out because it's broken for our
+# purposes in that it will shift the position of every character on the page,
+# not just the cursor line!
+# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
+adm1178|1178|lsi adm1178,
+ am,
+ cols#80, lines#24, xmc#1,
+ bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
+ home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
+ kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
+ sgr0=\E), smso=\EG4, smul=\EG1,
+
+#### Prime
+#
+# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
+# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
+# Prime merged with ComputerVision in the late 1980s; you can reach them at:
+#
+# ComputerVision Services
+# 500 Old Connecticut Path
+# Framingham, Mass.
+#
+
+# Standout mode is dim reverse-video.
+pt100|pt200|wren|fenix|prime pt100/pt200,
+ am, bw, mir, msgr,
+ cols#80, it#8, lines#24,
+ cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
+ cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
+ ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
+ home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
+ rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m,
+ smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
+ smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
+pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH, use=pt100,
+pt250|Prime PT250,
+ rmso@, smso@, use=pt100,
+pt250w|Prime PT250 in 132-column mode,
+ rmso@, smso@, use=pt100w,
+
+#### Qume (qvt)
+#
+# Qume, Inc.
+# 3475-A North 1st Street
+# San Jose CA 95134
+# Vox: (800)-457-4447
+# Fax: (408)-473-1510
+# Net: josed@techsupp.wyse.com (Jose D'Oliveira)
+#
+# Qume was bought by Wyse, but still (as of early 1995) has its own support
+# group and production division.
+#
+# Discontinued Qume models:
+#
+# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
+# built to replace them, and a qvt119+ which was a 101+ with available wide
+# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
+# and an ANSI-compatible qvt203 that replaced it. Qume started producing
+# ANSI-compatible terminals with the qvt323 and qvt61.
+#
+# Current Qume models (as of February 1995):
+#
+# All current Qume terminals have ANSI-compatible operation modes.
+# Qume is still producing the qvt62, which features emulations for other
+# popular lines such as ADDS, and dual-host capabilities. The qvt82 is
+# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
+# with many emulations including Wyse370, Wyse 325, etc. Their newest
+# model is the qvt520, which is vt420-compatible.
+#
+# There are some ancient printing Qume terminals under `Daisy Wheel Printers'
+#
+# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
+# setup mode. Shift-s should be a configuration save to NVRAM.
+
+qvt101|qvt108|qume qvt 101 and QVT 108,
+ xmc#1, use=qvt101+,
+
+# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
+# file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
+# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
+# What seems to be going on here is that this entry was designed so that
+# the normal highlight is bold and standout is dim plus something else
+# (reverse-video maybe? But then, are there two <rev> sequences?)
+qvt101+|qvt101p|qume qvt 101 PLUS product,
+ am, bw, hs, ul,
+ cols#80, lines#24, xmc#0,
+ bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
+ flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
+ ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
+ kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
+ khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
+ smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
+qvt102|qume qvt 102,
+ cnorm=\E., use=qvt101,
+# (qvt103: added <rmam>/<smam> based on init string -- esr)
+qvt103|qume qvt 103,
+ am, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
+ hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
+ rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
+ rmso=\E[m$<2>, rmul=\E[m$<2>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
+ sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+qvt103-w|qume qvt103 132 cols,
+ cols#132, lines#24,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
+qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
+ am, hs, mir, msgr,
+ cols#80, lines#24, xmc#0,
+ bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
+ cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
+ el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
+ hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
+ kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
+ kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
+ tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
+qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
+ lines#25, use=qvt119+,
+qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
+ cols#132,
+ is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
+qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
+ lines#25, use=qvt119+,
+qvt203|qvt203+|qume qvt 203 Plus,
+ dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
+ ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
+ kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
+ kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
+qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
+ cols#132, lines#24,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
+#
+# Since a command is present for enabling 25 data lines,
+# a specific terminfo entry may be generated for the 203.
+# If one is desired for the QVT 119 PLUS then 25 lines must
+# be selected in the status line (setup line 9).
+#
+qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
+ cols#80, lines#25,
+ is2=\E[=40h\E[?3l, use=qvt203,
+qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
+ cols#132, lines#25,
+ rs2=\E[?3h\E[=40h, use=qvt203,
+
+#### Televideo (tvi)
+#
+# TeleVideo
+# 550 East Brokaw Road
+# PO Box 49048 95161
+# San Jose CA 95112
+# Vox: (408)-954-8333
+# Fax: (408)-954-0623
+#
+#
+# These require incredible amounts of padding.
+#
+# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
+# Televideo terminals are ANSI and PC-ANSI compatible.
+
+tvi803|televideo 803,
+ clear=\E*$<10>, use=tvi950,
+
+# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
+# Switch settings are:
+#
+# S1 1 2 3 4
+# D D D D 9600
+# D D D U 50
+# D D U D 75
+# D D U U 110
+# D U D D 135
+# D U D U 150
+# D U U D 300
+# D U U U 600
+# U D D D 1200
+# U D D U 1800
+# U D U D 2400
+# U D U U 3600
+# U U D D 4800
+# U U D U 7200
+# U U U D 9600
+# U U U U 19200
+#
+# S1 5 6 7 8
+# U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
+# U D X U 7N2
+# U U D D 7O1
+# U U D U 7O2
+# U U U D 7E1
+# U U U U 7E2
+# D D X D 8N1
+# D D X U 8N2
+# D U D D 8O1
+# D U U U 8E2
+#
+# S1 9 Autowrap
+# U on
+# D off
+#
+# S1 10 CR/LF
+# U do CR/LF when CR received
+# D do CR when CR received
+#
+# S2 1 Mode
+# U block
+# D conversational
+#
+# S2 2 Duplex
+# U half
+# D full
+#
+# S2 3 Hertz
+# U 50
+# D 60
+#
+# S2 4 Edit mode
+# U local
+# D duplex
+#
+# S2 5 Cursor type
+# U underline
+# D block
+#
+# S2 6 Cursor down key
+# U send ^J
+# D send ^V
+#
+# S2 7 Screen colour
+# U green on black
+# D black on green
+#
+# S2 8 DSR status (pin 6)
+# U disconnected
+# D connected
+#
+# S2 9 DCD status (pin 8)
+# U disconnected
+# D duplex
+#
+# S2 10 DTR status (pin 20)
+# U disconnected
+# D duplex
+# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
+# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
+tvi910|televideo model 910,
+ OTbs, am, msgr,
+ cols#80, it#8, lines#24, xmc#1,
+ bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
+ home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
+ if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
+ kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ vpa=\E[%p1%{32}%+%c, use=adm+sgr,
+# From: Alan R. Rogers <rogers%albany@csnet-relay>
+# as subsequently hacked over by someone at SCO
+# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
+#
+# Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
+#
+# S1 1 2 3 4:
+# D D D D 9600 D D D U 50 D D U D 75 D D U U 110
+# D U D D 135 D U D U 150 D U U D 300 D U U U 600
+# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
+# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
+#
+# S1 5 6 7 8:
+# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
+# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
+# D U D D 8O1 D U U U 8E2
+#
+# S1 9 Autowrap (U = on, D = off)
+# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
+# S2 1 Mode (U = block, D = conversational)
+# S2 2 Duplex (U = half, D = full)
+# S2 3 Hertz (U = 50, D = 60)
+# S2 4 Edit mode (U = local, D = duplex)
+# S2 5 Cursor type (U = underline, D = block)
+# S2 6 Cursor down key (U = send ^J, D = send ^V)
+# S2 7 Screen colour (U = green on black, D = black on green)
+# S2 8 DSR status (pin 6) (U = disconnected, D = connected)
+# S2 9 DCD status (pin 8) (U = disconnected, D = connected)
+# S2 10 DTR status (pin 20) (U = disconnected, D = connected)
+#
+tvi910+|televideo 910+,
+ dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
+ kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
+ kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
+ ll=\E=7\s, use=tvi910,
+
+# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
+# <khome> from BRL entry -- esr)
+tvi912|tvi914|tvi920|old televideo 912/914/920,
+ OTbs, OTpt, am, msgr,
+ cols#80, it#8, lines#24, xmc#1,
+ bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
+ ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
+ il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
+ kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
+ kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
+ kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
+ tbc=\E3,
+# We got some new tvi912c terminals that act really weird on the regular
+# termcap, so one of our gurus worked this up. Seems that cursor
+# addressing is broken.
+tvi912cc|tvi912 at cowell college,
+ cup@, use=tvi912c,
+
+# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
+# From: Benjamin C. W. Sittler
+#
+# Someone has put a scanned copy of the manual online at:
+# http://vt100.net/televideo/912b-om/
+#
+# These terminals were produced ca. 1979, and had a 12" monochrome
+# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
+# ASCII, and were generally similar to adm3a but with attributes
+# (including some with magic cookies), fancy half-duplex mode, and
+# different bugs.
+#
+# Some operations reqire truly incredible amounts of padding. The
+# insert_line (<il1>) and delete_line (<dl1>) operations in particular
+# are so slow as to be nearly unusable.
+#
+# There may or may not have been a separate, earlier series of 912/920
+# terminals (without the "B" and "C" suffix); I have never seen one,
+# and the manual only describes the "B" and "C" series. The 912 and 920
+# are quite distinct from the 914 and 924, which were much nicer non-
+# magic-cookie terminals similar to the 950.
+#
+# This is a new description for the following TeleVideo terminals,
+# distinguished chiefly by their keyboards:
+#
+# TVI-912B - very odd layout, no function keys (84 keys)
+# TVI-920B - typewriter layout, no function keys (103 keys)
+# TVI-912C - very odd layout, function keys F1-F11 (82 keys)
+# TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
+#
+# To choose a setting for the TERM variable, start with the model:
+#
+# Model || base name
+# ----------||-----------
+# TVI-912B || tvi912b
+# TVI-912C || tvi912c
+# TVI-920B || tvi920b
+# TVI-920C || tvi920c
+#
+# Then add a suffix from the following table describing installed options
+# and how you'd like to use the terminal:
+#
+# Use Video | Second | Visual | Magic | Page || feature
+# Attributes | Page | Bell | Cookies | Print || suffix
+# ------------|--------|--------|---------|-------||---------
+# No | No | N/A | N/A | No || -unk
+# No | No | N/A | N/A | Yes || -p
+# No | Yes | No | N/A | No || -2p-unk
+# No | Yes | No | N/A | Yes || -2p-p
+# No | Yes | Yes | N/A | No || -vb-unk
+# No | Yes | Yes | N/A | Yes || -vb-p
+# Yes | No | N/A | No | N/A ||
+# Yes | No | N/A | Yes | N/A || -mc
+# Yes | Yes | No | No | N/A || -2p
+# Yes | Yes | No | Yes | N/A || -2p-mc
+# Yes | Yes | Yes | No | N/A || -vb
+# Yes | Yes | Yes | Yes | N/A || -vb-mc
+#
+# So e.g. a model 920 C with second page memory option, visual bell
+# and no magic cookies would be tvi920c-vb; a model 912 B without the
+# second page memory option and using magic cookies would be
+# tvi912b-mc
+#
+# PADDING
+#
+# At 9600 baud, the terminal is prone to overflow its input buffer
+# during complex operations (insert/delete
+# character/line/screen/page), and it does not signal this over the
+# RS232 cable. The typical symptom of an overrun is that the terminal
+# starts beeping, and output becomes garbled.
+#
+# The padding delays in this terminfo were derived using tack(1)
+# running on a Linux box connected to a TVI-920C with a later-model
+# (A49C1-style) ROM running at 9600 baud, so your mileage may
+# vary. The numbers below seem to give the terminal enough time so
+# that it doesn't overflow its input buffer and start losing
+# characters.
+#
+# KEYS
+#
+# If you want to use the FUNCT key on a tvi912[bc], use the
+# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
+# the following table (these also work on the 920 series):
+#
+# Unshifted Function Keys:
+#
+# Key | capname|| Equivalent
+# -----|--------||------------
+# F1 | <kf1> || FUNCT + @
+# F2 | <kf2> || FUNCT + A
+# F3 | <kf3> || FUNCT + B
+# F4 | <kf4> || FUNCT + C
+# F5 | <kf5> || FUNCT + D
+# F6 | <kf6> || FUNCT + E
+# F7 | <kf7> || FUNCT + F
+# F8 | <kf8> || FUNCT + G
+# F9 | <kf9> || FUNCT + H
+# F10 | <kf10> || FUNCT + I
+# F11 | <kf11> || FUNCT + J
+#
+# Shifted Function Keys:
+#
+# SHIFT + Key | capname|| Equivalent
+# -------------|--------||------------
+# SHIFT + F1 | <kf12> || FUNCT + `
+# SHIFT + F2 | <kf13> || FUNCT + a
+# SHIFT + F3 | <kf14> || FUNCT + b
+# SHIFT + F4 | <kf15> || FUNCT + c
+# SHIFT + F5 | <kf16> || FUNCT + d
+# SHIFT + F6 | <kf17> || FUNCT + e
+# SHIFT + F7 | <kf18> || FUNCT + f
+# SHIFT + F8 | <kf19> || FUNCT + g
+# SHIFT + F9 | <kf20> || FUNCT + h
+# SHIFT + F10 | <kf21> || FUNCT + i
+# SHIFT + F11 | <kf22> || FUNCT + j
+#
+# PORTS AND SWITCH SETTINGS
+#
+# Here are the switch settings for the TVI-912B/TVI-920B and
+# TVI-912C/TVI-920C:
+#
+# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
+# 2: 9600 3: 4800 4: 2400 5: 1200
+# 6: 600 7: 300 8: 150 9: 75
+# 10: 110
+#
+# S2 UART/Terminal options:
+# Up Down
+# 1: Not used Not allowed
+# 2: Alternate character set Standard character set
+# 3: Full duplex Half duplex
+# 4: 50 Hz refresh 60 Hz refresh
+# 5: No parity Send parity
+# 6: 2 stop bits 1 stop bit
+# 7: 8 data bits 7 data bits
+# 8: Not used Not allowed on Rev E or lower
+# 9: Even parity Odd parity
+# 10: Steady cursor Blinking cursor
+# (On Rev E or lower, use W25 instead of switch 10.)
+#
+# S5 UART/Terminal options:
+# Open Closed
+# 1: P3-6 Not connected DSR received on P3-6
+# 2: P3-8 Not connected DCD received on P3-8
+#
+# 3 Open, 4 Open: P3-20 Not connected
+# 3 Open, 4 Closed: DTR on when terminal is on
+# 3 Closed, 4 Open: DTR is connected to RTS
+# 3 Closed, 4 Closed: Not allowed
+#
+# 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
+# all data transmitted out of the modem port (P3) will also be
+# transmitted out of the printer port (P4).
+#
+# 6 Open, 7 Open: Not allowed
+# 6 Open, 7 Closed: 20ma current loop input
+# 6 Closed, 7 Open: RS232 input
+# 6 Closed, 7 Closed: Not allowed
+#
+# Jumper options:
+# If the jumper is installed, the effect will occur (the next time the terminal
+# is switched on).
+#
+# S4/W31: Enables automatic LF upon receipt of CR from
+# remote or keyboard.
+# S4/W32: Enables transmission of EOT at the end of Send. If not
+# installed, a carriage return is sent.
+# S4/W33: Disables automatic carriage return in column 80.
+# S4/W34: Selects Page Print Mode as initial condition. If not
+# installed, Extension Mode is selected.
+#
+# NON-STANDARD CAPABILITIES
+#
+# Sending <u9> or <u7> returns a cursor position report in the format
+# YX\r, where Y and X are as in <cup>. This format is described in
+# <u8> and <u6>, but it's not clear how one should write an
+# appropriate scanf string, since we need to subtract %' ' from the
+# character after reading it. The <u9> capability is used by tack(1)
+# to synchronize during padding tests, and seems to work for that
+# purpose.
+#
+# This description also includes the obsolete termcap capabilities
+# has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
+#
+# FEATURES NOT YET DESCRIBED IN THIS TERMINFO
+#
+# The FUNCT modifier actually works with every normal key by sending
+# ^AX\r, where X is the sequence normally sent by that key. This is a
+# sort of meta key not currently describable in terminfo.
+#
+# There are quite a few other keys (especially on the 920 models,) but
+# they are for the most part only useful in block mode.
+#
+# These terminals have lots of forms manipulation features, mainly
+# useful in block mode, including "clear X to nulls" (vs. "clear X to
+# spaces"; nulls are sentinels for "send X" operations); "send X"
+# operations for uploading all or part of the screen; and block-mode
+# editing keys (they don't send escape sequences, but manipulate video
+# memory directly). Block mode is used for local editing, and protect
+# mode (in conjunction with the "write protect" attribute,
+# a.k.a. half-intensity outside of protect mode) is used to control
+# which parts of the screen are edited/sent/printed (by <mc0>).
+#
+# There are at least two major families of ROM, "early" and
+# A49B1/A49C1; the major difference seems to be that the latter ROMs
+# support a few extra escape sequences for manipulating the off-screen
+# memory page, and for sending whole pages back to the host (mainly
+# useful in block mode.) The descriptions in this file don't use any
+# of those sequences: set cursor position including page (\E-PYX,
+# where P is \s for page 0 and ! for page 1 [actually only the LSB of
+# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
+# as in <cup>); read cursor position (\E/), which is analogous to <u9>
+# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
+# are as in <cup>, and some "send page" features mainly useful for
+# forms manipulation.
+#
+# The keyboard enable (\E") and disable (\E#) sequences are unused,
+# except that a terminal reset (<is2>) enables the keyboard.
+#
+# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
+# enabled in <is2>, but auto-flip is very jarring so we don't use it.
+#
+# BUGS
+#
+# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
+# sequences (I infer that in some TeleVideo terminal they may invert
+# and uninvert the display) so the <flash> sequence given here is a
+# cheesy page-flip instead.
+#
+# The back_tab (<cbt>) sequence (\EI) doesn't work according to
+# tack(1), so it is not included in the descriptions below.
+#
+# It's not clear whether auto_left_margin (<bw>) flag should be set
+# for these terminals; tack says yes, so it is set here, but this
+# differs from other descriptions I've seen.
+#
+# Extension print mode (<mc5>) echoes all characters to the printer
+# port [in addition to displaying them] except for the page print mode
+# sequence (<mc4>); this is a slight violation of the terminfo
+# definition for <mc5> but I don't expect it to cause problems. We
+# reset to page print mode in <rs1> since it may have been enabled
+# accidentally.
+#
+# The descriptions with plus signs (+) are building blocks.
+
+tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
+ OTbs, OTpt, am, bw,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
+ dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
+ home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
+ if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
+ ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
+ kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
+ mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
+ u7=\E?, u8=%c%c\r, u9=\E?,
+
+# This isn't included in the basic capabilities because it is
+# typically unusable in combination with the full range of video
+# attributes, since the magic cookie attributes turn into ASCII
+# control characters, and the half-intensity ("protected") attribute
+# converts all affected characters to spaces.
+
+tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
+ mc0=\EP,
+
+# This uses half-intensity mode (<dim>) for standout (<smso>), and
+# exposes no other attributes (half-intensity is the only attribute
+# that does not generate a magic cookie.)
+
+tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
+ msgr,
+ dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
+ smso=\E),
+
+# Full magic-cookie attribute support, with half-intensity reverse
+# video for standout. Note that we add a space in the <dim> sequence
+# to give a consistent magic-cookie count. Also note that <sgr> uses
+# backspacing (in the TVI-supported order) to apply all requested
+# attributes with only a single magic cookie.
+
+tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
+ xmc#1,
+ blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
+ rmul=\Em,
+ sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
+ sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
+
+# This uses the second page memory option to save & restore screen
+# contents. If your terminal is missing the option, this description
+# should still work, but that has not been tested.
+
+tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
+ flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
+ smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
+
+# This simulates flashing by briefly toggling to the other page
+# (kludge!)
+
+tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
+ bel=\EK$<100>\EK, use=tvi912b+2p,
+
+# Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
+
+tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
+ kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
+ kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
+ kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r,
+
+# Combinations of the basic building blocks
+
+tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
+ use=tvi912b+2p, use=tvi912b-unk,
+
+tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
+ use=tvi912b+vb, use=tvi912b-unk,
+
+tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
+ use=tvi912b+printer, use=tvi912b-unk,
+
+tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
+ use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
+
+tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
+ use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
+
+tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
+ use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
+
+tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
+ use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
+
+tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
+ use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
+
+tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
+ use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
+
+tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
+ use=tvi912b+dim, use=tvi912b-unk,
+
+tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
+ use=tvi912b+mc, use=tvi912b-unk,
+
+tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
+ use=tvi920b+fn, use=tvi912b-unk,
+
+tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
+ use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
+
+tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
+ use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
+
+tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
+ use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
+
+tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
+ use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
+ use=tvi912b-unk,
+
+tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
+ use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
+ use=tvi912b-unk,
+
+tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
+ use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
+ use=tvi912b-unk,
+
+tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
+ use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
+ use=tvi912b-unk,
+
+tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
+ use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
+ use=tvi912b-unk,
+
+tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
+ use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
+ use=tvi912b-unk,
+
+tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
+ use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
+
+tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
+ use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
+
+# Televideo 921 and variants
+# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
+# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
+# also added empty <acsc> to suppress tic warning -- esr)
+tvi921|televideo model 921 with sysline same as page & real vi function,
+ OTbs, OTpt, am, hs, xenl, xhp,
+ cols#80, lines#24, xmc#0,
+ acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
+ cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
+ el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
+ if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
+ is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
+ kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
+ ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
+ rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
+# without the beeper
+# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
+# also added empty <acsc> to suppress tic warning -- esr)
+tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
+ am, hs, xenl, xhp,
+ cols#80, lines#24, xmc#0,
+ acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
+ cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
+ el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
+ ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
+ invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
+ kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
+ kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
+ nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
+# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
+tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
+ dl1=\ER$<2*/>, il1=\EE$<2*/>,
+ is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
+ kil1=\EE$<2*/>, use=tvi92B,
+
+# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
+# in from a BSD termcap file because it looks like they do something the
+# old ones skip -- esr)
+tvi924|televideo tvi924,
+ am, bw, hs, in, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80, xmc#0,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
+ cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
+ cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
+ dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
+ flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
+ ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
+ invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
+ kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
+ kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
+ kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
+ kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
+ kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
+ kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
+ lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
+ pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
+ use=adm+sgr,
+
+# TVI925 DIP switches. In each of these, D = Down and U = Up,
+#
+# Here are the settings for the external (baud) switches (S1):
+#
+# Position Baud
+# 7 8 9 10 [Printer]
+# 1 2 3 4 [Main RS232]
+# -----------------------------------------------------
+# D D D D 9600
+# D D D U 50
+# D D U D 75
+# D D U U 110
+# D U D D 135
+# D U D U 150
+# D U U D 300
+# D U U U 600
+# U D D D 1200
+# U D D U 1800
+# U D U D 2400
+# U D U U 3600
+# U U D D 4800
+# U U D U 7200
+# U U U D 9600
+# U U U U 19200
+#
+#
+# Settings for word length and stop-bits (S1)
+#
+# Position Description
+# 5 6
+# ---------------------------
+# U - 7-bit word
+# D - 8-bit word
+# - U 2 stop bits
+# - D 1 stop bit
+#
+#
+# S2 (external) settings
+#
+# Position Up Dn Description
+# --------------------------------------------
+# 1 X Local edit
+# X Duplex edit (transmit editing keys)
+# --------------------------------------------
+# 2 X 912/920 emulation
+# X 925
+# --------------------------------------------
+# 3 X
+# 4 X No parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Odd parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Even parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Mark parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Space parity
+# 5 X
+# --------------------------------------------
+# 6 X White on black display
+# X Black on white display
+# --------------------------------------------
+# 7 X Half Duplex
+# 8 X
+# --------------------------------------------
+# 7 X Full Duplex
+# 8 X
+# --------------------------------------------
+# 7 X Block mode
+# 8 X
+# --------------------------------------------
+# 9 X 50 Hz
+# X 60 Hz
+# --------------------------------------------
+# 10 X CR/LF (Auto LF)
+# X CR only
+#
+# S3 (internal switch) settings:
+#
+# Position Up Dn Description
+# --------------------------------------------
+# 1 X Keyclick off
+# X Keyclick on
+# --------------------------------------------
+# 2 X English
+# 3 X
+# --------------------------------------------
+# 2 X German
+# 3 X
+# --------------------------------------------
+# 2 X French
+# 3 X
+# --------------------------------------------
+# 2 X Spanish
+# 3 X
+# --------------------------------------------
+# 4 X Blinking block cursor
+# 5 X
+# --------------------------------------------
+# 4 X Blinking underline cursor
+# 5 X
+# --------------------------------------------
+# 4 X Steady block cursor
+# 5 X
+# --------------------------------------------
+# 4 X Steady underline cursor
+# 5 X
+# --------------------------------------------
+# 6 X Screen blanking timer (ON)
+# X Screen blanking timer (OFF)
+# --------------------------------------------
+# 7 X Page attributes
+# X Line attributes
+# --------------------------------------------
+# 8 X DCD disconnected
+# X DCD connected
+# --------------------------------------------
+# 9 X DSR disconnected
+# X DSR connected
+# --------------------------------------------
+# 10 X DTR Disconnected
+# X DTR connected
+# --------------------------------------------
+#
+# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
+tvi925|televideo 925,
+ OTbs, am, bw, hs, ul,
+ cols#80, lines#24, xmc#1,
+ bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
+ flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
+ ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
+ kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
+ ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
+ kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
+ kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
+ tsl=\Eh\Ef, use=adm+sgr,
+# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
+# to avoid "magic cookie" standout glitch:
+tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
+ xmc@,
+ kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
+
+# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
+# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
+# for additional capabilities,
+# The following tvi descriptions from B:pjphar and virus!mike
+# is for all 950s. It sets the following attributes:
+# full duplex (\EDF) write protect off (\E()
+# conversation mode (\EC) graphics mode off (\E%)
+# white on black (\Ed) auto page flip off (\Ew)
+# turn off status line (\Eg) clear status line (\Ef\r)
+# normal video (\E0) monitor mode off (\EX or \Eu)
+# edit mode (\Er) load blank char to space (\Ee\040)
+# line edit mode (\EO) enable buffer control (^O)
+# protect mode off (\E\047) duplex edit keys (\El)
+# program unshifted send key to send line all (\E016)
+# program shifted send key to send line unprotected (\E004)
+# set the following to nulls:
+# field delimiter (\Ex0\200\200)
+# line delimiter (\Ex1\200\200)
+# start-protected field delimiter (\Ex2\200\200)
+# end-protected field delimiter (\Ex3\200\200)
+# set end of text delimiter to carriage return/null (\Ex4\r\200)
+#
+# TVI 950 Switch Setting Reference Charts
+#
+# TABLE 1:
+#
+# S1 1 2 3 4 5 6 7 8 9 10
+# +-----------------------+-----+-----+-----------------------+
+# | Computer Baud Rate |Data |Stop | Printer Baud Rate |
+# | |Bits |Bits | |
+# +------+-----------------------+-----+-----+-----------------------+
+# | Up | See | 7 | 2 | See |
+# +------+-----------------------+-----+-----+-----------------------+
+# | Down | TABLE 2 | 8 | 1 | TABLE 2 |
+# +------+-----------------------+-----+-----+-----------------------+
+#
+#
+# S2 1 2 3 4 5 6 7 8 9 10
+# +-----+-----+-----------------+-----+-----------+-----+-----+
+# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
+# +------+-----+-----+-----------------+-----+-----------+-----+-----+
+# | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
+# +------+-----+-----+-----------------+-----+-----------+-----+-----+
+# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
+# +------+-----+-----+-----------------+-----+-----------+-----+-----+
+#
+# TABLE 2:
+#
+# +-----------+-----+-----+-----+-----+-----------+
+# | Display | 1 | 2 | 3 | 4 | Baud |
+# +-----------+-----+-----+-----+-----+ |
+# | Printer | 7 | 8 | 9 | 10 | Rate |
+# +-----------+-----+-----+-----+-----+-----------+
+# | D | D | D | D | 9600 |
+# | U | D | D | D | 50 |
+# | D | U | D | D | 75 |
+# | U | U | D | D | 110 |
+# | D | D | U | D | 135 |
+# | U | D | U | D | 150 |
+# | D | U | U | D | 300 |
+# | U | U | U | D | 600 |
+# | D | D | D | U | 1200 |
+# | U | D | D | U | 1800 |
+# | D | U | D | U | 2400 |
+# | U | U | D | U | 3600 |
+# | D | D | U | U | 4800 |
+# | U | D | U | U | 7200 |
+# | D | U | U | U | 9600 |
+# | U | U | U | U | 19200 |
+# +-----+-----+-----+-----+-----------+
+#
+# TABLE 3:
+# +-----+-----+-----+-----------+
+# | 3 | 4 | 5 | Parity |
+# +-----+-----+-----+-----------+
+# | X | X | D | None |
+# | D | D | U | Odd |
+# | D | U | U | Even |
+# | U | D | U | Mark |
+# | U | U | U | Space |
+# +-----+-----+-----+-----------+
+# X = don't care
+#
+# CHART:
+# +-----+-----+-----------------+
+# | 7 | 8 | Communication |
+# +-----+-----+-----------------+
+# | D | D | Half Duplex |
+# | D | U | Full Duplex |
+# | U | D | Block |
+# | U | U | Local |
+# +-----+-----+-----------------+
+#
+# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
+# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
+# should be present and all tvi native modes use the same string for this.
+# Finally, note that BSD has cud1=^V. -- esr)
+tvi950|televideo 950,
+ OTbs, am, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, xmc#1,
+ acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
+ cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
+ fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
+ invis@,
+ is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
+ kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
+ kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
+ kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
+ rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
+ use=adm+sgr,
+#
+# is for 950 with two pages adds the following:
+# set 48 line page (\E\\2)
+# place cursor at page 0, line 24, column 1 (\E-07 )
+# set local (no send) edit keys (\Ek)
+#
+# two page 950 adds the following:
+# when entering ex, set 24 line page (\E\\1)
+# when exiting ex, reset 48 line page (\E\\2)
+# place cursor at 0,24,1 (\E-07 )
+# set duplex (send) edit keys (\El) when entering vi
+# set local (no send) edit keys (\Ek) when exiting vi
+#
+tvi950-2p|televideo950 w/2 pages,
+ is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
+ rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+ smkx=\El, use=tvi950,
+#
+# is for 950 with four pages adds the following:
+# set 96 line page (\E\\3)
+# place cursor at page 0, line 24, column 1 (\E-07 )
+#
+# four page 950 adds the following:
+# when entering ex, set 24 line page (\E\\1)
+# when exiting ex, reset 96 line page (\E\\3)
+# place cursor at 0,24,1 (\E-07 )
+#
+tvi950-4p|televideo950 w/4 pages,
+ is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
+ rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+ smkx=\El, use=tvi950,
+#
+# <is2> for reverse video 950 changes the following:
+# set reverse video (\Ed)
+#
+# set vb accordingly (\Ed ...delay... \Eb)
+#
+tvi950-rv|televideo950 rev video,
+ flash=\Ed$<200/>\Eb,
+ is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
+ use=tvi950,
+
+# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
+tvi950-rv-2p|televideo950 rev video w/2 pages,
+ flash=\Ed$<200/>\Eb,
+ is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
+ rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+ smkx=\El, use=tvi950,
+
+# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
+tvi950-rv-4p|televideo950 rev video w/4 pages,
+ flash=\Ed$<200/>\Eb,
+ is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
+ rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+ smkx=\El, use=tvi950,
+# From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
+# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
+# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
+# the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
+# the :ko: string had :cl: in it, which means that one of the original
+# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
+# the 950 has. Finally, corrected the <kel> string to match the 950 and what
+# ko implies -- esr)
+# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
+# also work.
+tvi955|televideo 955,
+ OTbs, mc5i, msgr@,
+ it#8, xmc@,
+ acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
+ civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
+ cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
+ is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
+ knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
+ rmam=\E[=7l, rmxon=^N,
+ rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
+ sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
+ use=tvi950,
+tvi955-w|955-w|televideo955 w/132 cols,
+ cols#132,
+ is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
+# use half-intensity as normal mode, full intensity as <bold>
+tvi955-hb|955-hb|televideo955 half-bright,
+ bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
+ sgr0=\EG0\E[=5h, use=tvi955,
+# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
+# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
+# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
+# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
+# it does to the function keys. I deduced <rmam>/<smam>.
+# also added empty <acsc> to suppress tic warning, -- esr)
+tvi970|televideo 970,
+ OTbs, OTpt, am, da, db, mir, msgr,
+ cols#80, it#8, lines#24,
+ acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
+ cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
+ ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
+ is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
+ kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
+ rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
+ smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, vpa=\E[%i%p1%dd,
+tvi970-vb|televideo 970 with visual bell,
+ flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
+ use=tvi970,
+tvi970-2p|televideo 970 with using 2 pages of memory,
+ rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
+ use=tvi970,
+# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
+# per line (rather than 40), Esc K chooses the normal character set. Not sure
+# padding is needed, but adapted from the tvi920c termcap. The <smso> and
+# <smul> strings are klutzy, but at least use no screen space.
+# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
+# its absence means <smam>=\Ev isn't safe to use. -- esr)
+# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
+# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
+# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
+tvipt|televideo personal terminal,
+ OTbs, am,
+ cols#80, lines#24,
+ cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
+ ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
+ il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
+ kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
+ rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
+# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
+tvi9065|televideo 9065,
+ am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
+ wnum#0, wsl#30,
+ acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
+ blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
+ cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
+ cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
+ cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
+ dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
+ el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
+ ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
+ il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
+ ip=$<3>,
+ is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
+ is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
+ kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
+ kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
+ mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
+ pfkey=\E|%p1%{48}%+%c3%p2%s\031,
+ pfloc=\E|%p1%{48}%+%c2%p2%s\031,
+ pfx=\E|%p1%{48}%+%c1%p2%s\031,
+ pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
+ rep=\E[%p2%db%p1%c, rev=\EG4,
+ rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
+ rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
+ rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
+ rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
+ rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
+ rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
+ sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
+ sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
+ smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
+ tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
+
+#### Visual (vi)
+#
+# In September 1993, Visual Technology of Westboro, Massachusetts,
+# merged with White Pine Software of Nashua, New Hampshire.
+#
+# White Pine Software may be contacted at +1 603/886-9050.
+# Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
+#
+
+# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
+# Recently I hacked together the following termcap for Visual
+# Technology's Visual 50 terminal. It's a slight modification of
+# the vt52 termcap.
+# It's intended to run when the Visual 50 is in vt52 emulation mode
+# (I know what you're thinking; if it's emulating a vt52, then why
+# another termcap? Well, it turns out that the Visual 50 can handle
+# <dl1> and db(?) among other things, which the vt52 can't)
+# The termcap works OK for the most part. The only problem is on
+# character inserts. The whole line gets painfully redrawn for each
+# character typed. Any suggestions?
+# Beau's entry is combined with the vi50 entry from University of Wisconsin.
+# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
+# disguise; <kf7>-<kf9> are really l1-l3.
+vi50|visual 50,
+ OTbs, OTpt, am, da, db, msgr,
+ cols#80, it#8, lines#24,
+ OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
+ cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
+ ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
+ kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
+ nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
+# this one was BSD & SCO's vi50
+vi50adm|visual 50 in adm3a mode,
+ am, msgr,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
+ ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
+ rmso=\ET, smso=\EU,
+# From: Jeff Siegal <jbs@quiotix.com>
+vi55|Visual 55,
+ OTbs, am, mir, msgr,
+ cols#80, it#8, lines#24,
+ clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
+ cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
+ il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
+ smir=\Ea, smso=\EU,
+
+# Visual 200 from BRL
+# The following switch settings are assumed for normal operation:
+# FULL_DUPLEX SCROLL CR
+# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
+# Other switches may be set for operator convenience or communication
+# requirements.
+# Character insertion is kludged in order to get around the "beep" misfeature.
+# (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
+# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
+# and <dl1> strings, but we seem to get along fine without them.
+vi200|visual 200,
+ OTbs, OTpt, am, mir, msgr,
+ OTkn#10, cols#80, it#8, lines#24,
+ acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
+ cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
+ el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
+ kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
+ kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
+ kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
+ kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
+ rmacs=\EG, rmkx=\E>, rmso=\E3,
+ rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
+ smkx=\E=, smso=\E4, tbc=\Eg,
+# The older Visuals didn't come with function keys. This entry uses
+# <smkx> and <rmkx> so that the keypad keys can be used as function keys.
+# If your version of vi doesn't support function keys you may want
+# to use vi200-f.
+vi200-f|visual 200 no function keys,
+ is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
+ kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
+ kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
+ use=vi200,
+vi200-rv|visual 200 reverse video,
+ cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
+
+# the function keys are programmable but we don't reprogram them to their
+# default values with <is2> because programming them is very verbose. maybe
+# an initialization file should be made for the 300 and they could be stuck
+# in it.
+# (vi300: added <rmam>/<smam> based on init string -- esr)
+vi300|visual 300 ansi x3.64,
+ am, bw, mir, xenl,
+ cols#80, lines#24,
+ bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ il1=\E[L, ind=^J,
+ is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
+ kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
+ kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
+ rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
+ smso=\E[1m, smul=\E[4m,
+# some of the vi300s have older firmware that has the command
+# sequence for setting editing extent reversed.
+vi300-old|visual 300 with old firmware (set edit extent reversed),
+ is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
+ use=vi300,
+
+# Visual 500 prototype entry from University of Wisconsin.
+# The best place to look for the escape sequences is page A1-1 of the
+# Visual 500 manual. The initialization sequence given here may be
+# overkill, but it does leave out some of the initializations which can
+# be done with the menus in set-up mode.
+# The :xp: line below is so that emacs can understand the padding requirements
+# of this slow terminal. :xp: is 10 time the padding factor.
+# (vi500: removed unknown :xp#4: termcap;
+# also added empty <acsc> to suppress tic warning -- esr)
+vi500|visual 500,
+ am, mir, msgr,
+ cols#80, it#8, lines#33,
+ acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
+ csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
+ cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+ dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
+ el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
+ ind=^J,
+ is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
+ kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
+ rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
+
+# The visual 550 is a visual 300 with tektronix graphics,
+# and with 33 lines. clear screen is modified here to
+# also clear the graphics.
+vi550|visual 550 ansi x3.64,
+ lines#33,
+ clear=\030\E[H\E[2J, use=vi300,
+
+vi603|visual603|visual 603,
+ hs, mir,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
+ csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
+ ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
+ rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
+ use=vt100,
+
+#### Wyse (wy)
+#
+# Wyse Technology
+# 3471 North First Street
+# San Jose, CA 95134
+# Vox: (408)-473-1200
+# Fax: (408) 473-1222
+# Web: http://www.wyse.com
+#
+# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
+# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
+# obvious address, <http://www.wyse.com>. They keep terminfo entries at
+# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
+#
+# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
+# They now own the Qume and Amdek brands, too. So these are the people to
+# talk with about all Link, Qume, and Amdek terminals.
+#
+# These entries include a few small fixes.
+# I canceled the bel capacities in the vb entries.
+# I made two trivial syntax fixes in the wyse30 entry.
+# I made some entries relative to adm+sgr.
+#
+#
+# Note: The wyse75, wyse85, and wyse99 have been discontinued.
+
+# Although the Wyse 30 can support more than one attribute
+# it requires magic cookies to do so. Many applications do not
+# function well with magic cookies. The following terminfo uses
+# the protect mode to support one attribute (dim) without cookies.
+# If more than one attribute is needed then the wy30-mc terminfo
+# should be used.
+#
+wy30|wyse30|Wyse 30,
+ am, bw, hs, mc5i, mir, msgr, xon,
+ cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
+ acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
+ civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
+ cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
+ dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
+ fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
+ ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
+ kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
+ kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
+ kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
+ kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
+ mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
+ rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
+ sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
+ sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
+ smso=\E`7\E), tbc=\E0, tsl=\EF,
+#
+# This terminal description uses the non-hidden attribute mode
+# (with magic cookie).
+#
+# (wy30-mc: added <smcup> to suppress tic warning --esr)
+wy30-mc|wyse30-mc|wyse 30 with magic cookies,
+ msgr@,
+ ma@, xmc#1,
+ blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
+ rmcup=\EG0, rmso=\EG0,
+ sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
+ sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
+ smso=\EG4, use=wy30, use=adm+sgr,
+# The mandatory pause used by <flash> does not work with
+# older versions of terminfo. If you see this effect then
+# unset xon and delete the / from the delay.
+# i.e. change $<100/> to $<100>
+wy30-vb|wyse30-vb|wyse 30 visible bell,
+ bel@, use=wy30,
+#
+# The Wyse 50 can support one attribute (e.g. Dim, Inverse,
+# Normal) without magic cookies by using the protect mode.
+# The following description uses this feature, but when more
+# than one attribute is put on the screen at once, all attributes
+# will be changed to be the same as the last attribute given.
+# The Wyse 50 can support more attributes when used with magic
+# cookies. The wy50-mc terminal description uses magic cookies
+# to correctly handle multiple attributes on a screen.
+#
+wy50|wyse50|Wyse 50,
+ am, bw, hs, mc5i, mir, msgr, xon,
+ cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
+ acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
+ civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
+ cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
+ ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
+ home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
+ is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
+ kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
+ kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
+ kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
+ ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
+ pfx=\Ez%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
+ ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
+ sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
+ sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
+ smso=\E`6\E), tbc=\E0, tsl=\EF,
+#
+# This terminal description uses the non-hidden attribute mode
+# (with magic cookie).
+#
+# The mandatory pause used by flash does not work with some
+# older versions of terminfo. If you see this effect then
+# unset <xon> and delete the / from the delay.
+# i.e. change $<100/> to $<100>
+# (wy50-mc: added <smcup> to suppress tic warning --esr)
+wy50-mc|wyse50-mc|wyse 50 with magic cookies,
+ msgr@,
+ ma@, xmc#1,
+ blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
+ rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
+ sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
+ sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
+ smso=\EGt, use=wy50, use=adm+sgr,
+wy50-vb|wyse50-vb|wyse 50 visible bell,
+ bel@, use=wy50,
+wy50-w|wyse50-w|wyse 50 132-column,
+ cols#132, lw#7, nlab#16, wsl#97,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
+ use=wy50,
+wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
+ bel@, use=wy50-w,
+
+#
+# The Wyse 350 is a Wyse 50 with color.
+# Unfortunately this means that it has magic cookies.
+# The color attributes are designed to overlap the reverse, dim and
+# underline attributes. This is nice for monochrome applications
+# because you can make underline stuff green (or any other color)
+# but for true color applications it's not so hot because you cannot
+# mix color with reverse, dim or underline.
+# To further complicate things one of the attributes must be
+# black (either the foreground or the background). In reverse video
+# the background changes color with black letters. In normal video
+# the foreground changes colors on a black background.
+# This terminfo uses some of the more advanced features of curses
+# to display both color and blink. In the final analysis I am not
+# sure that the wy350 runs better with this terminfo than it does
+# with the wy50 terminfo (with user adjusted colors).
+#
+# The mandatory pause used by flash does not work with
+# older versions of terminfo. If you see this effect then
+# unset xon and delete the / from the delay.
+# i.e. change $<100/> to $<100>
+#
+# Bug: The <op> capability resets attributes.
+wy350|wyse350|Wyse 350,
+ am, bw, hs, mc5i, mir, xon,
+ colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
+ wsl#45, xmc#1,
+ acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
+ cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
+ cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
+ dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
+ flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
+ il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
+ is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
+ kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
+ ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
+ kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
+ ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
+ pfx=\Ez%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
+ rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
+ setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
+ sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
+ sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
+ smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
+wy350-vb|wyse350-vb|wyse 350 visible bell,
+ bel@, use=wy350,
+wy350-w|wyse350-w|wyse 350 132-column,
+ cols#132, lw#7, nlab#16, wsl#97,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
+ use=wy350,
+wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
+ bel@, use=wy350-w,
+#
+# This terminfo description is untested.
+# The wyse100 emulates an adm31, so the adm31 entry should work.
+#
+wy100|wyse 100,
+ hs, mir,
+ cols#80, lines#24, xmc#1,
+ bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
+ invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
+ kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
+ rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
+#
+# The Wyse 120/150 has most of the features of the Wyse 60.
+# This terminal does not need padding up to 9600 baud!
+# <msgr> should be set but the clear screen fails when in
+# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
+# then set <msgr>.
+#
+wy120|wyse120|wy150|wyse150|Wyse 120/150,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
+ acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
+ cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
+ dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
+ flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
+ hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
+ is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
+ is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
+ kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
+ mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
+ pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
+ pfx=\EZ1%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
+ rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
+ rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
+ rs3=\EwG\Ee($<100>,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
+ smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
+ tbc=\E0, tsl=\EF, use=adm+sgr,
+#
+wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
+ cols#132, lw#7, nlab#16, wsl#97,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
+ rs2=\E`;$<70>, use=wy120,
+#
+wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy120,
+#
+wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
+#
+wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
+ bel@, use=wy120,
+#
+wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
+ bel@, use=wy120-w,
+#
+# The Wyse 60 is like the Wyse 50 but with more padding.
+# The reset strings are slow and the pad times very depending
+# on other parameters such as font loading. I have tried
+# to follow the following outline:
+#
+# <rs1> -> set personality
+# <rs2> -> set number of columns
+# <rs3> -> set number of lines
+# <is1> -> select the proper font
+# <is2> -> do the initialization
+# <is3> -> set up display memory (2 pages)
+#
+# The Wyse 60's that have vt100 emulation are slower than the
+# older Wyse 60's. This change happened mid-1987.
+# The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
+#
+# The meta key is only half right. This terminal will return the
+# high order bit set when you hit CTRL-function_key
+#
+# It may be useful to assign two function keys with the
+# values \E=(\s look at old data in page 1
+# \E=W, look at bottom of page 1
+# where \s is a space ( ).
+#
+# Note:
+# The Wyse 60 runs faster when the XON/XOFF
+# handshake is turned off.
+#
+# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
+# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
+wy60|wyse60|Wyse 60,
+ am, bw, hs, km, mc5i, mir, msgr,
+ cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
+ acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
+ cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
+ ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
+ home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
+ ip=$<3>, is1=\EcB0\EcC1,
+ is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
+ is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
+ kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
+ mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
+ pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
+ pfx=\EZ1%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
+ rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
+ rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
+ rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
+ smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
+ tbc=\E0, tsl=\EF, use=adm+sgr,
+#
+wy60-w|wyse60-w|wyse 60 132-column,
+ cols#132, lw#7, nlab#16, wsl#97,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
+ rs2=\EeF$<150>\E`;$<150>, use=wy60,
+#
+wy60-25|wyse60-25|wyse 60 80-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<200>, use=wy60,
+wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
+#
+wy60-42|wyse60-42|wyse 60 80-column 42-lines,
+ lines#42,
+ clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
+ dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
+ ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
+ ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
+wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
+ cols#132, lw#7, nlab#16, wsl#97,
+ clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
+ dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
+ nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
+#
+wy60-43|wyse60-43|wyse 60 80-column 43-lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\Ee+$<150>, use=wy60-42,
+wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\Ee+$<150>, use=wy60-42-w,
+#
+wy60-vb|wyse60-vb|Wyse 60 visible bell,
+ bel@, use=wy60,
+wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
+ bel@, use=wy60-w,
+
+# The Wyse-99GT looks at lot like the Wyse 60 except that it
+# does not have the 42/43 line mode. In the Wyse-60 the "lines"
+# setup parameter controls the number of lines on the screen.
+# For the Wyse 99GT the "lines" setup parameter controls the
+# number of lines in a page. The screen can display 25 lines max.
+# The Wyse-99GT also has personalities for the VT220 and
+# Tektronix 4014. But this has no bearing on the native mode.
+#
+# (msgr) should be set but the clear screen fails when in
+# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
+# then set msgr, else use msgr@.
+#
+# u0 -> enter Tektronix mode
+# u1 -> exit Tektronix mode
+#
+wy99gt|wyse99gt|Wyse 99gt,
+ msgr@,
+ clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
+ el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
+ il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
+ ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
+ u0=\E~>\E8, u1=\E[42h, use=wy60,
+#
+wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
+ cols#132, lw#7, nlab#16, wsl#97,
+ clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
+ dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
+ use=wy99gt,
+#
+wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
+#
+wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs2=\E`;$<150>, use=wy99gt-w,
+#
+wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
+ bel@, use=wy99gt,
+#
+wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
+ bel@, use=wy99gt-w,
+
+# Can't set tabs! Other bugs (ANSI mode only):
+# - can't redefine function keys (anyway, key redefinition in ANSI mode
+# is too much complex to be described);
+# - meta key can't be described (the terminal forgets it when reset);
+# The xon-xoff handshaking can't be disabled while in ansi personality, so
+# emacs can't work at speed greater than 9600 baud. No padding is needed at
+# this speed.
+# dch1 has been commented out because it causes annoying glittering when
+# vi deletes one character at the beginning of a line with tabs in it.
+# dch makes sysgen(1M) have a horrible behaviour when deleting
+# a screen and makes screen(1) behave badly, so it is disabled too. The nice
+# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
+# not, so smir and rmir are commented out as well.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
+ am, km, mc5i, mir, msgr, xenl,
+ cols#80, it#8, lines#25, vt#3,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
+ cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
+ cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
+ cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
+ enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
+ il1=\E[L, ind=\n$<1>, invis=\E[8m,
+ is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
+ kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
+ kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
+ kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
+ mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
+ rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
+ rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
+ sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
+
+# This is the american terminal. Here tabs work fine.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
+ hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
+
+# This terminal (firmware version 02) has a lot of bugs:
+# - can't set tabs;
+# - other bugs in ANSI modes (see above).
+# This description disables handshaking when using cup. This is because
+# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
+# cannot be used at speeds greater than 9600 baud, because at greater
+# speeds handshaking is needed even for character sending. If you use
+# DTR handshaking, you can use even greater speeds.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, it#8, lines#25, wsl#46,
+ acsc='x+y.wi~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
+ blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
+ cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
+ ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
+ flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
+ ind=^J, invis=\EG3,
+ is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
+ ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
+ kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
+ kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
+ kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
+ nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
+ rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
+ rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
+ sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
+ sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
+ smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
+
+# This is the american terminal. Here tabs work.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
+ hts=\E1, tbc=\E0, use=wy99f,
+
+#
+# The Wyse 160 is combination of the WY-60 and the WY-99gt.
+# The reset strings are slow and the pad times very depending
+# on other parameters such as font loading. I have tried
+# to follow the following outline:
+#
+# <rs1> -> set personality
+# <rs2> -> set number of columns
+# <rs3> -> set number of lines
+# <is1> -> select the proper font
+# <is2> -> do the initialization
+# <is3> -> set up display memory (2 pages)
+#
+# The display memory may be used for either text or graphics.
+# When "Display Memory = Shared" the terminal will have more pages
+# but garbage may be left on the screen when you switch from
+# graphics to text. If "Display Memory = Unshared" then the
+# text area will be only one page long.
+#
+# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
+# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
+wy160|wyse160|Wyse 160,
+ am, bw, hs, km, mc5i, mir, msgr,
+ cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
+ acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
+ cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
+ dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
+ el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
+ hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
+ is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
+ is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
+ kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
+ mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
+ pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
+ pfx=\EZ1%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
+ rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
+ rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
+ rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
+ smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
+ tbc=\E0, tsl=\EF, use=adm+sgr,
+#
+wy160-w|wyse160-w|wyse 160 132-column,
+ cols#132, lw#7, nlab#16, wsl#90,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
+ rs2=\EeF$<150>\E`;$<150>, use=wy160,
+#
+wy160-25|wyse160-25|wyse 160 80-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<200>, use=wy160,
+wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
+#
+wy160-42|wyse160-42|wyse 160 80-column 42-lines,
+ lines#42,
+ clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
+ ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
+ rs3=\Ee*$<150>, use=wy160,
+wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
+ cols#132, lw#7, nlab#16, wsl#90,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
+ rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
+#
+wy160-43|wyse160-43|wyse 160 80-column 43-lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\Ee+$<150>, use=wy160-42,
+wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\Ee+$<150>, use=wy160-42-w,
+#
+wy160-vb|wyse160-vb|Wyse 160 visible bell,
+ bel@, use=wy160,
+wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
+ bel@, use=wy160-w,
+#
+# The Wyse 75 is a vt100 lookalike without advanced video.
+#
+# The Wyse 75 can support one attribute (e.g. Dim, Inverse,
+# Underline) without magic cookies. The following description
+# uses this capability, but when more than one attribute is
+# put on the screen at once, all attributes will be changed
+# to be the same as the last attribute given.
+# The Wyse 75 can support more attributes when used with magic
+# cookies. The wy75-mc terminal description uses magic cookies
+# to correctly handle multiple attributes on a screen.
+#
+wy75|wyse75|wyse 75,
+ am, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, lines#24, ma#1, pb#1201, wsl#78,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
+ cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
+ dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
+ dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
+ ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
+ ind=\n$<2>, ip=$<1>,
+ is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
+ is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
+ kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
+ kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
+ kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
+ mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
+ rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
+ sc=\E7,
+ sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
+ tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
+#
+# This terminal description uses the non-hidden attribute mode
+# (with magic cookie).
+#
+wy75-mc|wyse75-mc|wyse 75 with magic cookies,
+ msgr@,
+ ma@, xmc#1,
+ blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
+ rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
+ sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
+ sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
+ use=wy75,
+wy75-vb|wyse75-vb|wyse 75 with visible bell,
+ pb@,
+ bel@, use=wy75,
+wy75-w|wyse75-w|wyse 75 in 132 column mode,
+ cols#132, wsl#130,
+ rs2=\E[35h\E[?3h$<80>, use=wy75,
+wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
+ pb@,
+ bel@, use=wy75-w,
+#
+# Wyse 85 emulating a vt220 7 bit mode.
+# 24 line screen with status line.
+#
+# The vt220 mode permits more function keys but it wipes out
+# the escape key. I strongly recommend that <f11> be set to
+# escape (esc).
+# The terminal may have to be set for 8 data bits and 2 stop
+# bits for the arrow keys to work.
+# The Wyse 85 runs faster with XON/XOFF enabled. Also the
+# <dch> and <ich> work best when XON/XOFF is set. <ich> and
+# <dch> leave trash on the screen when used without XON/XOFF.
+#
+wy85|wyse85|wyse 85,
+ am, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
+ dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
+ ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
+ enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
+ fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
+ ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
+ ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
+ is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
+ khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
+ mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
+ rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
+ rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
+ rs3=\E[?5l, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
+#
+# Wyse 85 with visual bell.
+wy85-vb|wyse85-vb|wyse 85 with visible bell,
+ bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
+#
+# Wyse 85 in 132-column mode.
+wy85-w|wyse85-w|wyse 85 in 132-column mode,
+ cols#132, wsl#132,
+ rs2=\E[35h\E[?3h$<70>, use=wy85,
+#
+# Wyse 85 in 132-column mode with visual bell.
+wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
+ bel@, use=wy85-w,
+
+# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
+# This copes with an apparent firmware bug in the wy85. He writes:
+# "What I did was change leave the terminal cursor keys set to Normal
+# (instead of application), and change \E[ to \233 for all the keys in
+# terminfo. At one point, I found some reference indicating that this
+# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
+# me), but I can't find that and the server under my bookmark to "Wyse
+# Technical" isn't responding. So there's the question of wether the wy85
+# terminfo should reflect the manufactuer's intended behaviour of the terminal
+# or the actual."
+wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
+ am, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
+ dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
+ ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
+ enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
+ fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
+ ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
+ ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
+ is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
+ kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
+ kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
+ kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
+ kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
+ kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
+ kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
+ kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
+ khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
+ kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
+ mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
+ rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
+ rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
+ rs3=\E[?5l, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[40h\E7\E[25;%i%p1%dH,
+#
+# Wyse 185 emulating a vt320 7 bit mode.
+#
+# This terminal always displays 25 lines. These lines may be used
+# as 24 data lines and a terminal status line (top or bottom) or
+# 25 data lines. The 48 and 50 line modes change the page size
+# and not the number of lines on the screen.
+#
+# The Compose Character key can be used as a meta key if changed
+# by set-up.
+#
+wy185|wyse185|wyse 185,
+ am, hs, km, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
+ dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
+ dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
+ el=\E[K, el1=\E[1K, enacs=\E)0,
+ flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
+ ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
+ ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
+ is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
+ kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
+ lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
+ ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
+ rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
+ rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
+ smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
+ use=vt220+keypad,
+#
+# Wyse 185 with 24 data lines and top status (terminal status)
+wy185-24|wyse185-24|wyse 185 with 24 data lines,
+ hs@,
+ dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
+ use=wy185,
+#
+# Wyse 185 with visual bell.
+wy185-vb|wyse185-vb|wyse 185+flash,
+ bel@, use=wy185,
+#
+# Wyse 185 in 132-column mode.
+wy185-w|wyse185-w|wyse 185 in 132-column mode,
+ cols#132, wsl#132,
+ dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
+ ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
+#
+# Wyse 185 in 132-column mode with visual bell.
+wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
+ bel@, use=wy185-w,
+
+# wy325 terminfo entries
+# Done by Joe H. Davis 3-9-92
+
+# lines 25 columns 80
+#
+wy325|wyse325|Wyse epc,
+ am, bw, hs, mc5i, mir,
+ cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
+ acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
+ cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
+ dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
+ flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
+ il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
+ is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
+ is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
+ kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
+ mc0=\EP, mc4=^T, mc5=\Ed#,
+ pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
+ pfx=\EZ1%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
+ rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
+ rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
+ rs3=\EwG\Ee($<100>,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
+ smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
+ tsl=\EF, use=adm+sgr,
+
+#
+# lines 24 columns 80 vb
+#
+wy325-vb|wyse325-vb|wyse-325 with visual bell,
+ bel@, use=wy325,
+
+#
+# lines 24 columns 132
+#
+wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
+ cols#132, lw#7, nlab#16, wsl#97,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
+ rs2=\E`;$<70>, use=wy325,
+#
+# lines 25 columns 80
+#
+wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy325,
+#
+# lines 25 columns 132
+#
+wy325-25w|wyse325-25w|wy325 132 columns,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
+#
+# lines 25 columns 132 vb
+#
+wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
+ bel@, use=wy325-w,
+
+#
+# lines 42 columns 80
+#
+wy325-42|wyse325-42|wyse-325 42 lines,
+ lh@, lines#42, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy325,
+#
+# lines 42 columns 132
+#
+wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
+ lh@, lines#42, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
+#
+# lines 42 columns 132 vb
+#
+wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
+ bel@, use=wy325-w,
+#
+# lines 43 columns 80
+#
+wy325-43|wyse325-43|wyse-325 43 lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, use=wy325,
+#
+# lines 43 columns 132
+#
+wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
+#
+# lines 43 columns 132 vb
+#
+wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
+ bel@, use=wy325-w,
+
+# Wyse 370 -- 24 line screen with status line.
+#
+# The terminal may have to be set for 8 data bits and 2 stop
+# bits for the arrow keys to work.
+#
+# If you change keyboards the terminal will send different
+# escape sequences.
+# The following definition is for the basic terminal without
+# function keys.
+#
+# <u0> -> enter Tektronix 4010/4014 mode
+# <u1> -> exit Tektronix 4010/4014 mode
+# <u2> -> enter ASCII mode (from any ANSI mode)
+# <u3> -> exit ASCII mode (goto native ANSI mode)
+# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
+# <u5> -> exit Tek 4207 mode (goto native ANSI mode)
+#
+# Bug: The <op> capability resets attributes.
+wy370-nk|wyse 370 without function keys,
+ am, ccc, hs, mc5i, mir, msgr, xenl, xon,
+ colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
+ dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
+ dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
+ el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
+ flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
+ ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
+ ind=\n$<2>,
+ initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
+ invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
+ is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
+ is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
+ mc5=\E[5i,
+ oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
+ op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
+ rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
+ rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
+ rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
+ smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
+ u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
+ u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
+#
+# Function key set for the ASCII (wy-50 compatible) keyboard
+# This is the default 370.
+#
+wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
+ kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
+ knp=\E[U, kpp=\E[V, use=wy370-nk,
+#
+# Function key set for the VT-320 (and wy85) compatible keyboard
+#
+wy370-105k|Wyse 370 with 105 key keyboard,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
+ use=wy370-nk, use=vt220+keypad,
+#
+# Function key set for the PC compatible keyboard
+#
+wy370-EPC|Wyse 370 with 102 key keyboard,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
+#
+# Wyse 370 with visual bell.
+wy370-vb|Wyse 370 with visible bell,
+ bel@, use=wy370,
+#
+# Wyse 370 in 132-column mode.
+wy370-w|Wyse 370 in 132-column mode,
+ cols#132, wsl#132,
+ rs2=\E[35h\E[?3h$<70>, use=wy370,
+#
+# Wyse 370 in 132-column mode with visual bell.
+wy370-wvb|Wyse 370 with visible bell 132-columns,
+ flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
+wy370-rv|Wyse 370 reverse video,
+ rs3=\E[32h\E[?5h, use=wy370,
+#
+# Wyse 99gt Tektronix 4010/4014 emulator,
+#
+wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
+ am, os,
+ cols#74, lines#35,
+ bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
+ cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
+ cuu1=^K, ff=^L,
+ hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
+ home=^]7`x @\037,
+ hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
+ is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
+#
+# Wyse 160 Tektronix 4010/4014 emulator,
+#
+wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
+ cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
+ home=^]8`g @\037, use=wy99gt-tek,
+#
+# Wyse 370 Tektronix 4010/4014 emulator,
+#
+wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
+ am, os,
+ cols#80, lines#36,
+ bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
+ cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
+ cuu1=^K, ff=^L,
+ hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
+ home=^]8g @\037,
+ hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
+ is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
+ nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
+
+# Vendor-supplied Wyse entries end here.
+
+#
+#TITLE: TERMINFO ENTRY WY520
+#DATE: 8/5/93
+# The WY520 terminfo is based on the WY285 entry published on the WYSE
+# BBS with the addition of more function keys and special keys.
+#
+# rs1 -> set personality
+# rs2 -> set number of columns
+# rs3 -> set number of lines
+# is1 -> select the proper font
+# is2 -> do the initialization
+# is3 -> If this string is empty then rs3 gets sent.
+#
+# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
+# - The BS key is programmed to generate BS in smcup since
+# is2 doesn't seem to work.
+# - Remove and shift/Remove: delete a character
+# - Insert : enter insert mode
+# - Find : delete to end of file
+# - Select : clear a line
+# - F11, F12, F13: send default sequences (not ESC, BS, LF)
+# - F14 : Home key
+# - Bottom status line (host writable line) is used.
+# - smkx,rmkx are removed because this would put the numeric
+# keypad in Dec application mode which doesn't seem to work
+# with SCO applications.
+#
+wy520|wyse520|wyse 520,
+ am, hs, km, mc5i, mir, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
+ dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
+ ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
+ enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
+ hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
+ il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
+ is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
+ kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
+ kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
+ lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
+ rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
+ rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
+ rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
+ smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
+ vpa=\E[%i%p1%dd, use=vt220+keypad,
+#
+# Wyse 520 with 24 data lines and status (terminal status)
+wy520-24|wyse520-24|wyse 520 with 24 data lines,
+ hs@,
+ dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
+ use=wy520,
+#
+# Wyse 520 with visual bell.
+wy520-vb|wyse520-vb|wyse 520 with visible bell,
+ flash=\E[30h\E\,\E[30l$<100>, use=wy520,
+#
+# Wyse 520 in 132-column mode.
+wy520-w|wyse520-w|wyse 520 in 132-column mode,
+ cols#132, wsl#132,
+ dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
+ ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
+#
+# Wyse 520 in 132-column mode with visual bell.
+wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
+ flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
+#
+#
+# Wyse 520 emulating a vt420 7 bit mode.
+# The DEL key is programmed to generate BS in is2.
+# With EPC keyboard.
+# - 'End' key will clear till end of line on EPC keyboard
+# - Shift/End : ignored.
+# - Insert : enter insert mode.
+# - Delete : delete a character (have to change interrupt character
+# to CTRL-C: stty intr '^c') for it to work since the
+# Delete key sends 7FH.
+wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
+ kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
+ kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
+ use=wy520,
+#
+# Wyse 520 with 24 data lines and status (terminal status)
+# with EPC keyboard.
+wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
+ hs@,
+ dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
+ use=wy520-epc,
+#
+# Wyse 520 with visual bell.
+wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
+ flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
+#
+# Wyse 520 in 132-column mode.
+wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
+ cols#132, wsl#132,
+ dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
+ ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
+#
+# Wyse 520 in 132-column mode with visual bell.
+wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
+ flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
+#
+# Wyse 520 in 80-column, 36 lines
+wy520-36|wyse520-36|wyse 520 with 36 data lines,
+ hs@,
+ lines#36,
+ dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
+ use=wy520,
+#
+# Wyse 520 in 80-column, 48 lines
+wy520-48|wyse520-48|wyse 520 with 48 data lines,
+ hs@,
+ lines#48,
+ dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
+ use=wy520,
+#
+# Wyse 520 in 132-column, 36 lines
+wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
+ use=wy520-36,
+#
+# Wyse 520 in 132-column, 48 lines
+wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
+ use=wy520-48,
+#
+#
+# Wyse 520 in 80-column, 36 lines with EPC keyboard
+wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
+ hs@,
+ lines#36,
+ dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
+ use=wy520-epc,
+#
+# Wyse 520 in 80-column, 48 lines with EPC keyboard
+wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
+ hs@,
+ lines#48,
+ dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
+ use=wy520-epc,
+#
+# Wyse 520 in 132-column, 36 lines with EPC keyboard
+wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
+ use=wy520-36pc,
+#
+# Wyse 520 in 132-column, 48 lines with EPC keyboard
+wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
+ use=wy520-48pc,
+
+# From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
+# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
+# file and we don't know what <hts> is -- esr)
+wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
+ dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
+ is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
+ kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
+ rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
+ smul=^N,
+
+wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
+ is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
+ use=wy75,
+
+# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
+wy100q|Wyse 100 for Quotron,
+ OTbs,
+ cols#80, lines#24, xmc#1,
+ cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
+ is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
+ kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
+
+#### Kermit terminal emulations
+#
+# Obsolete Kermit versions may be listed in the section describing obsolete
+# non-ANSI terminal emulators later in the file.
+#
+
+# KERMIT standard all versions.
+# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
+# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 9-25-84
+kermit|standard kermit,
+ OTbs,
+ cols#80, lines#24,
+ clear=\EE, cub1=^H, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
+ kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
+kermit-am|standard kermit plus auto-margin,
+ am,
+ is2=K1 Standard Kermit plus Automatic Margins\n,
+ use=kermit,
+# IBMPC Kermit 1.2.
+# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
+# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
+# line).
+# From: greg small <gts@populi.berkeley.edu> 8-30-84
+pckermit|pckermit12|UCB IBMPC Kermit 1.2,
+ am,
+ lines#25,
+ clear=\EH\EJ, ed@, el@,
+ is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
+# IBMPC Kermit 1.20
+# Cannot use line 25, now acts funny like ansi special scrolling region.
+# Initialization must escape from that region by cursor position to line 24.
+# Cannot use character insert because 1.20 goes crazy if insert at col 80.
+# Does not use :am: because autowrap is lost when kermit dropped and restarted.
+# From: greg small <gts@populi.berkeley.edu> 12-19-84
+pckermit120|UCB IBMPC Kermit 1.20,
+ it#8, lines#24,
+ cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
+ il1=\EL,
+ is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
+ rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
+# MS-DOS Kermit 2.27 for the IBMPC
+# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
+# Cannot use line 25, now acts funny like ansi special scrolling region.
+# Initialization must escape from that region by cursor position to line 24.
+# Does not use am: because autowrap is lost when kermit dropped and restarted.
+# Reverse video for standout like H19.
+# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
+ OTbs, am@,
+ cols#80, it#8, lines#24,
+ clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+ cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
+ home=\EH, ht=^I, il1=\EL,
+ is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
+ kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
+ rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
+# MS-DOS Kermit 2.27 with automatic margins
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
+ am,
+ cvvis=\EO\Eq\EG\EvK5,
+ is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
+ use=msk227,
+# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
+# Automatic margins now default. Use ansi <sgr> for highlights.
+# Define function keys.
+# (msk22714: removed obsolete ":kn#10:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
+ am,
+ bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
+ is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
+ kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
+ kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
+# This was designed for a VT320 emulator, but it is probably a good start
+# at support for the VT320 itself.
+# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
+# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
+vt320-k3|MS-Kermit 3.00's vt320 emulation,
+ am, eslok, hs, km, mir, msgr, xenl,
+ cols#80, it#8, lines#49, pb#9600, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
+ fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
+ sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
+# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
+# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
+# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
+vt320-k311|dec vt320 series as defined by kermit 3.11,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
+ flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
+ lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
+ rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
+ smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
+
+######## NON-ANSI TERMINAL EMULATIONS
+#
+
+#### Avatar
+#
+# These entries attempt to describe Avatar, a terminal emulation used with
+# MS-DOS bulletin-board systems. It was designed to give ANSI-like
+# capabilities, but with cheaper (shorter) control sequences. Messy design,
+# excessively dependent on PC idiosyncracies, but apparently rather popular
+# in the BBS world.
+#
+# No color support. Avatar doesn't fit either of the Tektronix or HP color
+# models that terminfo knows about. An Avatar color attribute is the
+# low 7 bits of the IBM-PC display-memory attribute. Bletch.
+#
+# I wrote these entries while looking at the Avatar spec. I don't have
+# the facilities to test them. Let me know if they work, or don't.
+#
+# Avatar escapes not used by these entries (because maybe you're smarter
+# and more motivated than I am and can figure out how to wrap terminfo
+# around some of them, and because they are weird enough to be funny):
+# level 0:
+# ^L -- clear window/reset current attribute to default
+# ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
+#
+# bit: 6 5 4 3 2 1 0
+# | | | | |
+# +---+---+ | +---+---+
+# | | |
+# | | foreground color
+# | foreground intensity
+# background color
+# level 0+:
+# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
+# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
+# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
+# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
+# (^V^L and ^V^M set the current attribute as a side-effect.)
+# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
+# in the pattern, <c> the number of times the pattern
+# should be repeated. If either value is 0, no-op.
+# The pattern can contain Avatar console codes,
+# including other ^V ^Y patterns.
+# level 1:
+# ^V^O -- clockwise mode on; turn print direction right each time you
+# hit a window edge (yes, really). Turned off by CR
+# ^V^P -- no-op
+# ^V^Q%c -- query the driver
+# ^V^R -- driver reset
+# ^V^S -- Sound tone (PC-specific)
+# ^V^T -- change highlight at current cursor poition to %c
+# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
+# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
+# -- define window
+#
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
+# tell ncurses that the corresponding highlights exist; it should use <sgr>,
+# which is the only method that will actually work for multiple highlights.)
+#
+# Update by TD - 2004: half of this was inconsistent. Found documentation
+# and repaired most of the damage. sgr0 is probably incorrect, but the
+# available documentation gives no clues for a workable string.
+avatar0|avatar terminal emulator level 0,
+ am, bce, msgr,
+ cols#80, it#8, lines#25,
+ blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
+ cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
+ ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
+ rmacs@, rs2=^L,
+ sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
+ sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
+ use=klone+acs,
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+avatar0+|avatar terminal emulator level 0+,
+ dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+avatar|avatar1|avatar terminal emulator level 1,
+ civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
+ rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
+
+#### RBcomm
+#
+# RBComm is a lean and mean terminal emulator written by the Interrupt List
+# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
+# '90s), especially in the BBS world, and still has some loyal users due to
+# its very small memory footprint and to a cute macro language.
+rbcomm|IBM PC with RBcomm and EMACS keybindings,
+ am, bw, mir, msgr, xenl,
+ cols#80, it#8, lines#25,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=^C, cuf1=^B,
+ cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
+ dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
+ il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
+ is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
+ kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
+ rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
+ rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
+ rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
+ smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
+rbcomm-nam|IBM PC with RBcomm without autowrap,
+ am@,
+ bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
+ is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
+ kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
+rbcomm-w|IBM PC with RBcomm in 132 column mode,
+ cols#132,
+ bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
+ is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
+ kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
+
+######## LCD DISPLAYS
+#
+
+#### Matrix Orbital
+# from: Eric Z. Ayers (eric@ale.org)
+#
+# Matrix Orbital 20x4 LCD display
+# Command Character is 0xFE (decimal 254, octal 376)
+#
+# On this device, cursor addressability isn't possible. The LCD expects:
+# 0xfe G <col> <row>
+# for cup: %p1 == row and %p2 is column
+#
+# This line:
+# cup=\376G%p2%c%p1%c
+# LOOKS like it will work, but sometimes only one of the two numbers is sent.
+# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
+#
+# Alas, there is no cursor upline capability on this display.
+#
+# These entries add some 'sanity stuff' to the clear function. That is, it
+# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
+# and turns off the cursor blinking and stuff like that.
+#
+# NOTE: calling 'beep' turns on the backlight (bell)
+# NOTE: calling 'flash' turns it on and back off (visual bell)
+#
+MtxOrb|Generic Matrix Orbital LCD display,
+ bel=\376B^A, clear=\376X\376C\376R\376K\376T,
+ cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
+ flash=\376B\001$<200>\376F, home=\376H,
+MtxOrb204|20x4 Matrix Orbital LCD display,
+ cols#20, lines#4, use=MtxOrb,
+MtxOrb162|16x2 Matrix Orbital LCD display,
+ cols#16, lines#2, use=MtxOrb,
+# The end
+
+######## OLDER TERMINAL TYPES
+#
+# This section is devoted to older commercial terminal brands that are now
+# discontinued, but known to be still in use or represented by emulations.
+#
+
+#### AT&T (att, tty)
+#
+# This section also includes Teletype-branded VDTs.
+#
+# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
+# Boundless Technologies); for details, see the header comment on the ADDS
+# section.
+#
+# These are AT&T's official terminfo entries. All-caps aliases have been
+# removed.
+#
+att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
+ am, eo, mir, msgr, xon,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
+ kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
+ kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
+ kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
+ smso=\E[7m,
+att2350|AT&T 2350 Video Information Terminal 80 column mode,
+ mc0@, mc4@, mc5@, use=att2300,
+
+# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
+# Seems upward compatible with vt100, plus ins/del line/char.
+# On sgr, the protection parameter is ignored.
+# No check is made to make sure that only 3 parameters are output.
+# standout= reverse + half-intensity = 3 | 5.
+# bold= reverse + underline = 2 | 3.
+# note that half-bright blinking doesn't look different from normal blinking.
+# NOTE:you must program the function keys first, label second!
+# (att4410: a BSD entry has been seen with the following capabilities:
+# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
+# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
+att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
+ am, hs, mir, msgr, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
+ dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
+ ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
+ is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
+ kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
+ kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
+ ll=\E[24H, nel=^M^J,
+ pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
+ pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
+ sc=\E7,
+ sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%p1%{1}%+%dH,
+
+att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
+ cols#132, wsl#132,
+ is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
+
+att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
+ OTbs,
+ pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
+ use=att5410v1,
+
+att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
+ cols#132, wsl#132,
+ is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
+
+# 5410 in terms of a vt100
+# (v5410: added <rmam>/<smam> based on init string -- esr)
+v5410|att5410 in terms of a vt100,
+ am, mir, msgr, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=^J, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
+ dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
+ il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
+ rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ use=vt100+fnkeys,
+
+#
+# Teletype Model 5420 -- A souped up 5410, with multiple windows,
+# even! the 5420 has three modes: scroll, window or page mode
+# this terminfo should work in scroll or window mode, but doesn't
+# take advantage of any of the differences between them.
+#
+# Has memory below (2 lines!)
+# 3 pages of memory (plus some spare)
+# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
+# <hpa>, <hts> would work for these, but these work in both scroll and window
+# mode... Unset insert character so insert mode works
+# <is1> sets 80 column mode,
+# <is2> escape sequence:
+# 1) turn off all fonts
+# 2) function keys off, keyboard lock off, control display off,
+# insert mode off, erasure mode off,
+# 3) full duplex, monitor mode off, send graphics off, nl on lf off
+# 4) reset origin mode
+# 5) set line wraparound
+# 6) exit erasure mode, positional attribute mode, and erasure extent mode
+# 7) clear margins
+# 8) program ENTER to transmit ^J,
+# We use \212 to program the ^J because a bare ^J will get translated by
+# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
+# 1 2 3 4 5 6 7 8
+# <is3> set screen color to black,
+# No representation in terminfo for the delete word key: kdw1=\Ed
+# Key capabilities assume the power-up send sequence...
+# This <rmcup> is not strictly necessary, but it helps maximize
+# memory usefulness: <rmcup=\Ez>,
+# Alternate sgr0: <sgr0=\E[m\EW^O>,
+# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
+# smkx programs the SYS PF keys to send a set sequence.
+# It also sets up labels f1, f2, ..., f8, and sends edit keys.
+# This string causes them to send the strings <kf1>-<kf8>
+# when pressed in SYS PF mode.
+# (att4415: I added <rmam>/<smam> based on the init string -- esr)
+att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
+ OTbs, db, mir, xon,
+ lh#2, lm#78, lw#8, nlab#8, wsl#55,
+ cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
+ cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
+ cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
+ dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
+ flash=\E[?5h$<200>\E[?5l, home=\E[x,
+ hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
+ il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
+ is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
+ is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
+ kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
+ kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+ kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
+ kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
+ lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
+ mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
+ rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
+ sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
+ tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+ use=att4410,
+
+att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
+ cols#132, lm#54, wsl#97,
+ is1=\E[?3h$<100>, use=att4415,
+
+att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
+ flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
+
+att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
+ cols#132, lm#54, wsl#97,
+ flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
+ use=att4415,
+
+# Note that this mode permits programming USER PF KEYS and labels
+# However, when you program user pf labels you have to reselect
+# user pf keys to make them appear!
+att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
+ pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
+ pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
+
+att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415,
+
+att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415-rv,
+
+att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415-w,
+
+att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415-w-rv,
+
+att5420_2|AT&T 5420 model 2 80 cols,
+ am, db, hs, mir, msgr, xon,
+ cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
+ cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
+ el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
+ hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
+ invis=\E[8m,
+ is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
+ kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
+ kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
+ kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
+ kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
+ kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
+ lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
+ mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
+ rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
+ sc=\E7,
+ sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+att5420_2-w|AT&T 5420 model 2 in 132 column mode,
+ cols#132,
+ is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
+ use=att5420_2,
+
+att4418|att5418|AT&T 5418 80 cols,
+ am, xon,
+ cols#80, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
+ ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
+ is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
+ kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
+ kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
+ kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
+ kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
+ kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
+ rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
+att4418-w|att5418-w|AT&T 5418 132 cols,
+ cols#132,
+ is1=\E[?3h, use=att5418,
+
+att4420|tty4420|teletype 4420,
+ OTbs, da, db, eo, msgr, ul, xon,
+ cols#80, lines#24, lm#72,
+ bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
+ kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
+ kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
+ lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
+ rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
+
+# The following is a terminfo entry for the Teletype 4424
+# asynchronous keyboard-display terminal. It supports
+# the vi editor. The terminal must be set up as follows,
+#
+# HIGHLIGHT DEFINITION 3-TONE
+# DISPLAY FUNCTION GROUP III
+#
+# The second entry below provides limited (a la adm3a)
+# operation under GROUP II.
+#
+# This must be used with DISPLAY FUNCTION GROUP I or III
+# and HIGHLIGHT DEFINITION 3-TONE
+# The terminal has either bold or blink, depending on options
+#
+# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
+att4424|tty4424|teletype 4424,
+ OTbs, am, xon,
+ cols#80, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
+ dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
+ ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
+ kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
+ rmul=\EZ,
+ sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
+ sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
+ tbc=\EF,
+
+att4424-1|tty4424-1|teletype 4424 in display function group I,
+ kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
+ use=att4424,
+
+# This entry is not one of AT&T's official ones, it was translated from the
+# 4.4BSD termcap file. The highlight strings are different from att4424.
+# I have no idea why this is -- older firmware version, maybe?
+# The following two lines are the comment originally attached to the entry:
+# This entry appears to avoid the top line - I have no idea why.
+# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
+att4424m|tty4424m|teletype 4424M,
+ am, da, db, mir,
+ cols#80, it#8, lines#23,
+ bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
+ dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
+ is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+
+# The Teletype 5425 is really version 2 of the Teletype 5420. It
+# is quite similar, except for some minor differences. No page
+# mode, for example, so all of the <cup> sequences used above have
+# to change back to what's being used for the 5410. Many of the
+# option settings have changed their numbering as well.
+#
+# This has been tested on a preliminary model.
+#
+# (att5425: added <rmam>/<smam> based on the init string -- esr)
+att5425|tty5425|att4425|AT&T 4425/5425,
+ am, da, db, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
+ el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
+ hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
+ invis=\E[8m, is1=\E<\E[?3l$<100>,
+ is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
+ is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
+ kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
+ kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
+ kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
+ nel=^M^J,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
+ rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
+ rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
+ sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
+ vpa=\E[%p1%{1}%+%dd,
+
+att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
+ smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
+
+att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
+ cols#132, lm#54, wsl#97,
+ is1=\E[?3h$<100>, use=tty5425,
+
+# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
+# I also added <rmam>/<smam> -- esr)
+att4426|tty4426|teletype 4426S,
+ am, da, db, xon,
+ cols#80, lines#24, lm#48,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
+ cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
+ hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
+ il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
+ is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
+ kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
+ kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
+ nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
+ rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
+ rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
+ smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%p1%dd,
+
+# Terminfo entry for the AT&T 510 A Personal Terminal
+# Function keys 9 - 16 are available only after the
+# screen labeled (soft keys/action blocks) are labeled. Function key
+# 9 corresponds to the leftmost touch target on the screen,
+# function key 16 corresponds to the rightmost.
+#
+# This entry is based on one done by Ernie Rice at Summit, NJ and
+# changed by Anne Gallup, Skokie, IL, ttrdc!anne
+att510a|bct510a|AT&T 510A Personal Terminal,
+ am, mir, msgr, xenl, xon,
+ cols#80, lh#2, lines#24, lw#7, nlab#8,
+ acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
+ dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
+ el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
+ hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
+ is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
+ kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
+ kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
+ kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
+ mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g,
+
+# Terminfo entry for the AT&T 510 D Personal Terminal
+# Function keys 9 through 16 are accessed by bringing up the
+# system blocks.
+# Function key 9 corresponds to the leftmost touch target on the screen,
+# function key 16 corresponds to the rightmost.
+#
+# There are problems with soft key labeling. These are due to
+# strangenesses in the native terminal that are impossible to
+# describe in a terminfo.
+att510d|bct510d|AT&T 510D Personal Terminal,
+ am, da, db, mir, msgr, xenl, xon,
+ cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
+ acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
+ cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
+ el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
+ hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
+ invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
+ kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
+ kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
+ kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
+ kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
+ mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
+ rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
+ rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
+ rs2=\E[5;0|, sc=\E7,
+ sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
+ smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
+ smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+
+# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
+att500|att513|AT&T 513 using page mode,
+ am, chts, mir, msgr, xenl, xon,
+ cols#80, lh#2, lines#24, lw#8, nlab#8,
+ acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
+ csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ indn=\E[%p1%dE, invis=\E[8m,
+ is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
+ kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
+ kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
+ kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
+ kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
+ kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
+ kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
+ khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
+ kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
+ kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
+ kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
+ ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
+ mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
+ nel=\EE,
+ pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
+ pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
+ pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
+ rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
+ rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
+ rmul=\E[m,
+ rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
+ rs2=\E[5;0|, sc=\E7,
+ sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h,
+ smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+
+# 01-07-88
+# printer must be set to EMUL ANSI to accept ESC codes
+# <cuu1> stops at top margin
+# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
+# and alt font ascii,wrap on,tabs cleared
+# <is2> disables newline on LF,Emphasized off
+# The <u0> capability sets form length
+att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
+ xhpa, xvpa,
+ bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
+ orhi#100, orl#12, orvi#72,
+ cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
+ cr=^M,
+ csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
+ cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
+ ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
+ lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
+ rshm=\E[m,
+ scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
+ smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
+ smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
+ u0=\E[%p1%dt, vpa=\E[%p1%dd,
+
+# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
+# The following SET-UP modes are assumed for normal operation:
+# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements. This termcap description is for the Resident Terminal Mode.
+# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# The BRL entry also said: UNSAFE :ll=\E[70H:
+att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
+ am, xon,
+ cols#88, it#8, lines#70, vt#3,
+ bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
+ kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
+ rs1=\Ec, sc=\E7,
+
+# 5620 terminfo (2.0 or later ROMS with char attributes)
+# The following SET-UP modes are assumed for normal operation:
+# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements. This termcap description is for Resident Terminal Mode. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# assumptions: <ind> (scroll forward one line) is only done at screen bottom
+# Be aware that older versions of the dmd have a firmware bug that affects
+# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
+# <msgr> is from an otherwise inferior BRL for this terminal. That entry
+# also has <ll>=\E[70H commented out and marked unsafe.
+# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
+att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
+ OTbs, am, msgr, npc, xon,
+ cols#88, it#8, lines#70,
+ bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
+ cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
+ pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
+ rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
+ sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
+att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
+ lines#24, use=att5620,
+att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
+ lines#34, use=att5620,
+# 5620 layer running the "S" system's downloaded graphics handler:
+att5620-s|tty5620-s|layer|vitty|5620 S layer,
+ OTbs, OTpt, am,
+ cols#80, it#8, lines#72,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
+ cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
+ el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
+ kll=\E[70;1H,
+
+# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
+#
+# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
+# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
+att605|AT&T 605 80 column 102key keyboard,
+ am, eo, xon,
+ cols#80, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il1=\E[L, ind=^J, invis=\E[8m,
+ is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
+ kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
+ kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
+ kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
+ kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
+ kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
+ kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
+ kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
+ kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
+ kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
+ kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
+ kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
+ mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
+ rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
+ smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%i%p1%dx,
+att605-pc|ATT 605 in pc term mode,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
+ cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
+ dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
+ kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
+ kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
+ rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
+ xonc=e, use=att605,
+att605-w|AT&T 605-w 132 column 102 key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
+ use=att605,
+# (att610: I added <rmam>/<smam> based on the init string. I also
+# added <indn> and <rin> because the BSD file says the att615s have them,
+# and the 615 is like a 610 with a big keyboard, and most of their other
+# smart terminals support the same sequence -- esr)
+att610|AT&T 610; 80 column; 98key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ indn=\E[%p1%dS, invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
+ nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
+ rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
+att610-w|AT&T 610; 132 column; 98key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att610,
+
+att610-103k|AT&T 610; 80 column; 103key keyboard,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
+ kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
+ kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
+ kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
+ kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
+ khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
+ knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
+ kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
+ krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
+ kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
+att610-103k-w|AT&T 610; 132 column; 103key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att610-103k,
+att615|AT&T 615; 80 column; 98key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
+ kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
+ kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
+ kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
+ kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
+att615-w|AT&T 615; 132 column; 98key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
+ kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
+ kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
+ kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
+ kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
+att615-103k|AT&T 615; 80 column; 103key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
+att615-103k-w|AT&T 615; 132 column; 103key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
+# (att620: I added <rmam>/<smam> based on the init string and
+# <rin>/<indn> from a BSD termcap -- esr)
+att620|AT&T 620; 80 column; 98key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ indn=\E[%p1%dS, invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
+ kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
+ kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
+ kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
+ kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
+ kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
+ kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+ kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
+ mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
+ rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
+ rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
+ smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%i%p1%dx,
+att620-w|AT&T 620; 132 column; 98key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att620,
+att620-103k|AT&T 620; 80 column; 103key keyboard,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
+ kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
+ kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
+ kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
+ kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
+ kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
+ kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
+ kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
+ kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
+ kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
+ kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
+ kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
+ ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
+
+att620-103k-w|AT&T 620; 132 column; 103key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att620-103k,
+
+# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
+# The following SETUP modes are assumed for normal operation:
+# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
+# Font_Size=Large Non-Layers_Window_Cols=80
+# Non-Layers_Window_Rows=60
+# Other SETUP modes may be set for operator convenience or communication
+# requirements. Some capabilities assume a printer attached to the Aux EIA
+# port. This termcap description is for the Fixed Non-Layers Window. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
+att630|AT&T 630 windowing terminal,
+ OTbs, am, da, db, mir, msgr, npc, xon,
+ cols#80, it#8, lines#60, lm#0,
+ bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
+ kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
+ kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
+ kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
+ kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
+ kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
+ mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
+ rmul=\E[m, rs2=\Ec, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
+ sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
+ lines#24, use=att630,
+
+# This is the att700 entry for 700 native emulation of the AT&T 700
+# terminal. Comments are relative to changes from the 605V2 entry and
+# att730 on which the entry is based. Comments show the terminfo
+# capability name, termcap name, and description.
+#
+# Here is what's going onm in the init string:
+# ESC [ 50;4| set 700 native mode (really is 605)
+# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
+# ESC [ 53;0| set GenFlow to Xon/Xoff
+# ESC [ 8 ;0| set CR on NL
+# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
+# ESC [ ? 4 l jump scroll
+# ESC [ ? 5 l/h video: normal (l); reverse (h)
+# ESC [ ?13 l Labels on
+# ESC [ ?15 l parity check = no
+# ESC [ 13 l monitor mode off
+# ESC [ 20 l LF on NL (not CRLF on NL)
+# ESC [ ? 7 h autowrap on
+# ESC [ 12 h local echo off
+# ESC ( B GO = ASCII
+# ESC ) 0 G1 = Special Char & Line Drawing
+# ESC [ ? 31 l Set 7 bit controls
+#
+# Note: Most terminals, especially the 600 family use Reverse Video for
+# standout mode. DEC also uses reverse video. The VT100 uses bold in addition
+# Assume we should stay with reverse video for 70.. However, the 605V2 exits
+# standout mode with \E[m (all normal attributes). The 730 entry simply
+# exits reverse video which would leave other current attributes intact. It
+# was assumed the 730 entry to be more correct so rmso has changed. The
+# 605V2 has no sequences to turn individual attributes off, thus its setting
+# and the rmso/smso settings from the 730.
+#
+# Note: For the same reason as above in rmso I changed exit under-score mode
+# to specifically turn off underscore, rather than return to all normal
+# attributes
+#
+# Note: The following pkey_xmit is taken from the 605V2 which contained the
+# capability as pfxl. It was changed here to pfx since pfxl
+# will only compile successfully with Unix 4.0 tic. Also note that pfx only
+# allows strings to be parameters and label values must be programmed as
+# constant strings. Supposedly the pfxl of Version 4.0 allows both labels
+# and strings to be parameters. The 605V2 pfx entry should be examined later
+# in this regard. For reference the 730 pfxl entry is shown here for comparison
+# 730 pfx entry:
+# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
+# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
+#
+# (for 4.0 tic)
+# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+#
+# (for <4.0 tic)
+# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+#
+# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
+#
+# Port1 Interface
+#
+# modular 10 pin Connector
+# Left side Right side
+# Pin 1 2 3 4 5 6 7 8 9 10
+#
+# Key (notch) at bottom
+#
+# Pin 1 DSR
+# 3 DCD
+# 4 DTR
+# 5 Sig Ground
+# 6 RD
+# 7 SD
+# 8 CTS
+# 9 RTS
+# 10 Frame Ground
+#
+# The manual is 189 pages and is loaded with details about the escape codes,
+# etc..... Available from AT&T CIC 800-432-6600...
+# ask for Document number 999-300-660..
+#
+att700|AT&T 700 24x80 column display w/102key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
+ fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
+ is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
+ is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
+ kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
+ kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
+ kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
+ kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
+ kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
+ kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
+ kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
+ kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
+ mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
+ rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
+ smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
+ tsl=\E7\E[99;%i%p1%dx,
+
+# This entry was modified 3/13/90 by JWE.
+# fixes include additions of <enacs>, correcting <rep>, and modification
+# of <kHOM>. (See comments below)
+# att730 has status line of 80 chars
+# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
+# the <kf25> and up keys are used for shifted system Fkeys
+# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
+# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
+# and 122 key keyboards, the 730's translation is \E[2J. For consistency
+# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
+# 102, 102+1, or 122 key keyboards
+# kHOM=\E[2J,
+# (att730: I added <rmam>/<smam> based on the init string -- esr)
+att730|AT&T 730 windowing terminal,
+ am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
+ cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\ED, invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
+ kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
+ kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
+ kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
+ kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
+ kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
+ kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
+ kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
+ mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
+ pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
+ rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
+ swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
+att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
+ lines#41, use=att730,
+att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
+ lines#24, use=att730,
+att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
+ flash=\E[?5l$<200>\E[?5h,
+ is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
+ use=att730,
+att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
+ lines#41, use=att730r,
+att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
+ lines#24, use=att730r,
+
+# The following represents the screen layout along with the associated
+# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
+# not appear on the screen but are shown to reference the bezel buttons.
+# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
+# position relative to the screen.
+#
+#
+#
+# +----------------------------------------------------------------+
+# | |
+# XXXX | kf0 kf24 | XXXX
+# | |
+# | |
+# XXXX | kf1 kf23 | XXXX
+# | |
+# | |
+# XXXX | kf2 kf22 | XXXX
+# | |
+# | |
+# XXXX | kf3 kf21 | XXXX
+# | |
+# | |
+# XXXX | kf4 kf20 | XXXX
+# | |
+# | |
+# XXXX | kf5 kf19 | XXXX
+# | |
+# | |
+# XXXX | kf6 kf18 | XXXX
+# | |
+# | |
+# XXXX | | XXXX
+# | |
+# | |
+# +----------------------------------------------------------------+
+#
+# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
+#
+# Note: XXXX represents the screen buttons
+# CMD REDRAW
+#
+# MAIL
+#
+# version 1 note:
+# The character string sent by key 'kf26' may be user programmable
+# to send either \E[16s, or \E[26s.
+# The character string sent by key 'krfr' may be user programmable
+# to send either \E[17s, or \E[27s.
+#
+# Depression of the "CMD" key sends \E! (kcmd)
+# Depression of the "MAIL" key sends \E[26s (kf26)
+# "REDRAW" same as "REFRESH" (krfr)
+#
+# "kf" functions adds carriage return to output string if terminal is in
+# 'new line' mode.
+#
+# The following are functions not covered in the table above:
+#
+# Set keyboard character (SKC): \EPn1;Pn2w
+# Pn1= 0 Back Space key
+# Pn1= 1 Break key
+# Pn2= Program char (hex)
+#
+# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
+# Pn1= Window number (1-39)
+# Pn2-Pn5= Y;X;Y;X coordinates
+#
+# Screen Selection (SSL): \E[Pnu
+# Pn= Window number
+#
+# Set Terminal Modes (SM): \E[Pnh
+# Pn= 3 Graphics mode
+# Pn= > Cursor blink
+# Pn= < Enter new line mode
+# Pn= = Enter reverse insert/replace mode
+# Pn= ? Enter no scroll mode
+#
+# Reset Terminal Mode (RM): \E[Pnl
+# Pn= 3 Exit graphics mode
+# Pn= > Exit cursor blink
+# Pn= < Exit new line mode
+# Pn= = Exit reverse insert/replace mode
+# Pn= ? Exit no scroll mode
+#
+# Screen Status Report (SSR): \E[Pnp
+# Pn= 0 Request current window number
+# Pn= 1 Request current window dimensions
+#
+# Device Status Report (DSR): \E[6n Request cursor position
+#
+# Call Status Report (CSR): \E[Pnv
+# Pn= 0 Call failed
+# Pn= 1 Call successful
+#
+# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
+# Pn1= Button number to be loaded
+# Pn2= Character count of "string"
+# Pn3= Key mode being loaded:
+# 0= Unshifted
+# 1= Shifted
+# 2= Control
+# String= Text string (15 chars max)
+#
+# Screen Number Report (SNR): \E[Pnp
+# Pn= Screen number
+#
+# Screen Dimension Report (SDR): \E[Pn1;Pn2r
+# Pn1= Number of rows available in window
+# Pn2= Number of columns available in window
+#
+# Cursor Position Report (CPR): \E[Pn1;Pn2R
+# Pn1= "Y" Position of cursor
+# Pn2= "X" Position of cursor
+#
+# Request Answer Back (RAB): \E[c
+#
+# Answer Back Response (ABR): \E[?;*;30;VSV
+# *= 0 No printer available
+# *= 2 Printer available
+# V= Software version number
+# SV= Software sub version number
+# (printer-available field not documented in v1)
+#
+# Screen Alignment Aid: \En
+#
+# Bell (lower pitch): \E[x
+#
+# Dial Phone Number: \EPdstring\
+# string= Phone number to be dialed
+#
+# Set Phone Labels: \EPpstring\
+# string= Label for phone buttons
+#
+# Set Clock: \EPchour;minute;second\
+#
+# Position Clock: \EPsY;X\
+# Y= "Y" coordinate
+# X= "X" coordinate
+#
+# Delete Clock: \Epr\
+#
+# Programming The Function Buttons: \EPfPn;string\
+# Pn= Button number (00-06, 18-24)
+# (kf00-kf06, kf18-kf24)
+# string= Text to sent on button depression
+#
+# The following in version 2 only:
+#
+# Request For Local Directory Data: \EPp12;\
+#
+# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
+#
+# Request for Local Directory Data in print format: \EPp13;\
+#
+# Enable 'Prt on Line' mode: \022 (DC2)
+#
+# Disable 'Prt on Line' mode: \024 (DC4)
+#
+
+# 05-Aug-86:
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 2 and later.
+att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
+ am, xon,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
+ cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
+ il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
+ kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
+ kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
+ kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
+ kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
+ krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
+ rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
+ rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
+ smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
+
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 1.
+att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
+ lines#24,
+ mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
+tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
+ lines#22, use=att505,
+#
+#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
+# This cut mark helps make life less painful for people running ncurses tic
+# on machines with relatively little RAM. The file can be broken in half here
+# cleanly and compiled in sections -- no `use' references cross this cut
+# going forward.
+#
+
+#### Ampex (Dialogue)
+#
+# Yes, these are the same people who are better-known for making audio- and
+# videotape. I'm told they are located in Redwood City, CA.
+#
+
+# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
+# (ampex80: some capabilities merged in from SCO's entry -- esr)
+ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
+ OTbs, am, bw, ul,
+ cols#80, it#8, lines#24,
+ bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
+ ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
+ smso=\Ej, smul=\El, tbc=\E3,
+# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
+ampex175|ampex d175,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
+ is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
+ kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
+ rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
+# No backspace key in the main QWERTY cluster. Fortunately, it has a
+# NEWLINE/PAGE key just above RETURN that sends a strange single-character
+# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
+# mode), this key can be used as the erase key; I find I like this. Because
+# some people and some systems may not, there is another termcap ("ampex175")
+# that suppresses this little eccentricity by omitting the relevant capability.
+ampex175-b|ampex d175 using left arrow for erase,
+ kbs=^_, use=ampex175,
+# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
+# (ampex210: removed obsolete ":kn#10:" -- esr)
+ampex210|a210|ampex a210,
+ OTbs, am, hs, xenl,
+ cols#80, it#8, lines#24, xmc#1,
+ cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
+ fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
+ if=/usr/share/tabset/std, il1=\EE, invis@,
+ is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
+ kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
+ kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
+ kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
+ tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
+# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
+# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
+# and moved the padding to be *after* the caps -- esr)
+ampex219|ampex-219|amp219|Ampex with Automargins,
+ hs, xenl,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
+ clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
+ csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
+ cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
+ cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
+ el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
+ is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
+ kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
+ rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
+ rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
+ smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
+ampex219w|ampex-219w|amp219w|Ampex 132 cols,
+ cols#132, lines#24,
+ bel=^G, cr=^M, cud1=^J, ind=^J,
+ is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
+# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
+ampex232|ampex-232|Ampex Model 232,
+ am,
+ cols#80, lines#24, xmc#1,
+ cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
+ flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
+ invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
+ kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
+ kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
+ kf9=^AI\r, khome=^^, use=adm+sgr,
+# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
+ampex232w|Ampex Model 232 / 132 columns,
+ cols#132, lines#24,
+ is2=\E\034Eg\El, use=ampex232,
+
+#### Ann Arbor (aa)
+#
+# Ann Arbor made dream terminals for hackers -- large screen sizes and huge
+# numbers of function keys. At least some used monitors in portrait mode,
+# allowing up to 76-character screen heights! They were reachable at:
+#
+# Ann Arbor Terminals
+# 6175 Jackson Road
+# Ann Arbor, MI 48103
+# (313)-663-8000
+#
+# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
+# can't be found on the Web; I fear they're long dead. R.I.P.
+#
+
+
+# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
+# Highly modified 6/22 by Mike O'Brien.
+# split out into several for the various screen sizes by dave-yost@rand
+# Modifications made 3/82 by Mark Horton
+# Modified by Tom Quarles at UCB for greater efficiency and more diversity
+# status line moved to top of screen, <flash> removed 5/82
+# Some unknown person at SCO then hacked the init strings to make them more
+# efficient.
+#
+# assumes the following setup:
+# A menu: 0000 1010 0001 0000
+# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
+# C menu: 56 66 0 0 9600 0110 1100
+# D menu: 0110 1001 1 0
+#
+# Briefly, the settings are for the following modes:
+# (values are for bit set/clear with * indicating our preference
+# and the value used to test these termcaps)
+# Note that many of these settings are irrelevent to the terminfo
+# and are just set to the default mode of the terminal as shipped
+# by the factory.
+#
+# A menu: 0000 1010 0001 0000
+# Block/underline cursor*
+# blinking/nonblinking cursor*
+# key click/no key click*
+# bell/no bell at column 72*
+#
+# key pad is cursor control*/key pad is numeric
+# return and line feed/return for <cr> key *
+# repeat after .5 sec*/no repeat
+# repeat at 25/15 chars per sec. *
+#
+# hold data until pause pressed/process data unless pause pressed*
+# slow scroll/no slow scroll*
+# Hold in area/don't hold in area*
+# functions keys have default*/function keys disabled on powerup
+#
+# show/don't show position of cursor during page transmit*
+# unused
+# unused
+# unused
+#
+# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
+# Baud rate (9600*)
+#
+# 2 bits of parity - 00=odd,01=even*,10=space,11=mark
+# 1 stop bit*/2 stop bits
+# parity error detection off*/on
+#
+# keyboard local/on line*
+# half/full duplex*
+# disable/do not disable keyboard after data transmission*
+#
+# transmit entire page/stop transmission at cursor*
+# transfer/do not transfer protected characters*
+# transmit all characters/transmit only selected characters*
+# transmit all selected areas/transmit only 1 selected area*
+#
+# transmit/do not transmit line separators to host*
+# transmit/do not transmit page tab stops tabs to host*
+# transmit/do not transmit column tab stop tabs to host*
+# transmit/do not transmit graphics control (underline,inverse..)*
+#
+# enable*/disable auto XON/XOFF control
+# require/do not require receipt of a DC1 from host after each LF*
+# pause key acts as a meta key/pause key is pause*
+# unused
+#
+# unused
+# unused
+# unused
+# unused
+#
+# XON character (17*)
+# XOFF character (19*)
+#
+# C menu: 56 66 0 0 9600 0110 1100
+# number of lines to print data on (printer) (56*)
+#
+# number of lines on a sheet of paper (printer) (66*)
+#
+# left margin (printer) (0*)
+#
+# number of pad chars on new line to printer (0*)
+#
+# printer baud rate (9600*)
+#
+# printer parity: 00=odd,01=even*,10=space,11=mark
+# printer stop bits: 2*/1
+# print/do not print guarded areas*
+#
+# new line is: 01=LF,10=CR,11=CRLF*
+# unused
+# unused
+#
+# D menu: 0110 1001 1 0
+# LF is newline/LF is down one line, same column*
+# wrap to preceding line if move left from col 1*/don't wrap
+# wrap to next line if move right from col 80*/don't wrap
+# backspace is/is not destructive*
+#
+# display*/ignore DEL character
+# display will not/will scroll*
+# page/column tab stops*
+# erase everything*/erase unprotected only
+#
+# editing extent: 0=display,1=line*,2=field,3=area
+#
+# unused
+#
+
+annarbor4080|aa4080|ann arbor 4080,
+ OTbs, am,
+ cols#80, lines#40,
+ bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
+ cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
+ cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
+ kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
+
+# Strange Ann Arbor terminal from BRL
+aas1901|Ann Arbor K4080 w/S1901 mod,
+ am,
+ cols#80, lines#40,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
+ home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
+ nel=^M^J,
+
+# If you're using the GNU termcap library, add
+# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
+# to these capabilities. This is the nonstandard GNU termcap scrolling
+# capability, arguments are:
+# 1. Total number of lines on the screen.
+# 2. Number of lines above desired scroll region.
+# 3. Number of lines below (outside of) desired scroll region.
+# 4. Total number of lines on the screen, the same as the first parameter.
+# The generic Ann Arbor entry is the only one that uses this.
+aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
+ OTbs, am, km, mc5i, mir, xon,
+ cols#80, it#8,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
+ hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
+ il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
+ is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
+ kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
+ kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
+ kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
+ kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
+ kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
+ khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
+ mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
+ rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
+ rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
+ sgr0=\E[m,
+ smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
+ smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
+ vpa=\E[%p1%{1}%+%dd,
+
+aaa+rv|ann arbor ambassador in reverse video,
+ blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
+ is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
+ rs1=\E[H\E[7m\E[J$<156>,
+ sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
+ sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
+# Ambassador with the DEC option, for partial vt100 compatibility.
+aaa+dec|ann arbor ambassador in dec vt100 mode,
+ acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
+ csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
+ sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
+ smacs=^O,
+aaa-18|ann arbor ambassador/18 lines,
+ lines#18,
+ is2=\E7\E[60;0;0;18p\E8,
+ rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
+ use=aaa+unk,
+aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
+ use=aaa+rv, use=aaa-18,
+aaa-20|ann arbor ambassador/20 lines,
+ lines#20,
+ is2=\E7\E[60;0;0;20p\E8,
+ rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
+ use=aaa+unk,
+aaa-22|ann arbor ambassador/22 lines,
+ lines#22,
+ is2=\E7\E[60;0;0;22p\E8,
+ rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
+ use=aaa+unk,
+aaa-24|ann arbor ambassador/24 lines,
+ lines#24,
+ is2=\E7\E[60;0;0;24p\E8,
+ rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
+ use=aaa+unk,
+aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
+ use=aaa+rv, use=aaa-24,
+aaa-26|ann arbor ambassador/26 lines,
+ lines#26,
+ is2=\E7\E[60;0;0;26p\E8,
+ rmcup=\E[60;0;0;26p\E[26;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
+aaa-28|ann arbor ambassador/28 lines,
+ lines#28,
+ is2=\E7\E[60;0;0;28p\E8,
+ rmcup=\E[60;0;0;28p\E[28;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
+aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
+ eslok, hs,
+ lines#29,
+ dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
+ fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
+ rmcup=\E[60;1;0;30p\E[29;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
+ tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
+aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
+ use=aaa+rv, use=aaa-30-s,
+aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
+ rmcup=\E[60;1;0;30p\E[59;1H\E[K,
+ smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
+aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
+ rmcup=\E[60;1;0;30p\E[59;1H\E[K,
+ smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
+aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
+ lines#30,
+ is2=\E7\E[60;0;0;30p\E8,
+ rmcup=\E[60;0;0;30p\E[30;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
+aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
+ use=aaa+rv, use=aaa-30,
+aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
+ rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
+ use=aaa-30,
+aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
+ rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
+ use=aaa+rv, use=aaa-30,
+aaa-36|ann arbor ambassador/36 lines,
+ lines#36,
+ is2=\E7\E[60;0;0;36p\E8,
+ rmcup=\E[60;0;0;36p\E[36;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
+aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
+ use=aaa+rv, use=aaa-36,
+aaa-40|ann arbor ambassador/40 lines,
+ lines#40,
+ is2=\E7\E[60;0;0;40p\E8,
+ rmcup=\E[60;0;0;40p\E[40;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
+aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
+ use=aaa+rv, use=aaa-40,
+aaa-48|ann arbor ambassador/48 lines,
+ lines#48,
+ is2=\E7\E[60;0;0;48p\E8,
+ rmcup=\E[60;0;0;48p\E[48;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
+aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
+ use=aaa+rv, use=aaa-48,
+aaa-60-s|ann arbor ambassador/59 lines+status,
+ eslok, hs,
+ lines#59,
+ dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
+ fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
+ tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
+aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
+ use=aaa+rv, use=aaa-60-s,
+aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
+ use=aaa+dec, use=aaa+rv, use=aaa-60-s,
+aaa-60|ann arbor ambassador/60 lines,
+ lines#60,
+ is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
+ use=aaa+unk,
+aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
+ use=aaa+rv, use=aaa-60,
+aaa-db|ann arbor ambassador 30/destructive backspace,
+ OTbs@,
+ cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
+
+guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
+ lines#33,
+ flash=\E[>59h$<100>\E[>59l,
+ is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
+ rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
+guru+rv|guru changes for reverse video,
+ flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
+guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
+ use=guru+rv, use=guru-33,
+guru+s|guru status line,
+ eslok, hs,
+ dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
+ rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
+ tsl=\E[>51h\E[1;%p1%dH\E[2K,
+guru-nctxt|guru with no saved context,
+ smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
+guru-s|guru-33-s|ann arbor guru/33 lines+status,
+ lines#32,
+ is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
+ smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-24|ann arbor guru 24 lines,
+ cols#80, lines#24,
+ is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
+ use=guru+unk,
+guru-44|ann arbor guru 44 lines,
+ cols#97, lines#44,
+ is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
+ use=guru+unk,
+guru-44-s|ann arbor guru/44 lines+status,
+ lines#43,
+ is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
+ smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-76|guru with 76 lines by 89 cols,
+ cols#89, lines#76,
+ is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+guru-76-s|ann arbor guru/76 lines+status,
+ cols#89, lines#75,
+ is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
+ smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-76-lp|guru-lp|guru with page bigger than line printer,
+ cols#134, lines#76,
+ is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+guru-76-w|guru 76 lines by 178 cols,
+ cols#178, lines#76,
+ is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+guru-76-w-s|ann arbor guru/76 lines+status+wide,
+ cols#178, lines#75,
+ is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
+ smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
+ cols#178, lines#76,
+ is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+aaa-rv-unk|ann arbor unknown type,
+ lh#0, lw#0, nlab#0,
+ blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
+ is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
+ rs1=\E[H\E[7m\E[J,
+ sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
+ sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
+
+#### Applied Digital Data Systems (adds)
+#
+# ADDS itself is long gone. ADDS was bought by NCR, and the same group made
+# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
+# terminals was merged again. Then AT&T sold the terminal business to
+# SunRiver, which later changed its name to Boundless Technologies. The
+# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
+# as of early 1995) are at:
+#
+# Boundless Technologies
+# 100 Marcus Boulevard
+# Hauppauge, NY 11788-3762
+# Vox: (800)-231-5445
+# Fax: (516)-342-7378
+# Web: http://boundless.com
+#
+# Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
+# In 1995 Boundless acquired DEC's terminals business.
+#
+
+# Regent: lowest common denominator, works on all regents.
+# (regent: renamed ":bc:" to ":le:" -- esr)
+regent|Adds Regent Series,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
+ home=\EY\s\s, ind=^J, ll=^A,
+# Regent 100 has a bug where if computer sends escape when user is holding
+# down shift key it gets confused, so we avoid escape.
+regent100|Adds Regent 100,
+ xmc#1,
+ bel=^G,
+ cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
+ kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
+ kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
+ lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
+ sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
+regent20|Adds Regent 20,
+ bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
+ use=regent,
+regent25|Adds Regent 25,
+ bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
+ use=regent20,
+regent40|Adds Regent 40,
+ xmc#1,
+ bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
+ kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
+ kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
+ lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
+ smul=\E0`, use=regent25,
+regent40+|Adds Regent 40+,
+ is2=\EB, use=regent40,
+regent60|regent200|Adds Regent 60,
+ dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
+ rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
+ use=regent40+,
+# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
+# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
+viewpoint|addsviewpoint|adds viewpoint,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
+ cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
+ cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
+ ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
+ kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
+ rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
+# Some viewpoints have bad ROMs that foo up on ^O
+screwpoint|adds viewpoint with ^O bug,
+ cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
+
+# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
+# The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
+# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
+# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
+# invis=01000100 and %c is the logical or of desired attributes.
+# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
+#
+# Update by TD - 2004:
+# Adapted from
+# http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
+#
+# COMMANDS ASCII CODE
+#
+# Address, Absolute ESC,=,row,column
+# Beep BEL
+# Aux Port Enable ESC,@
+# Aux Port Disable ESC,A
+# Backspace BS
+# Cursor back BS
+# Cursor down LF
+# Cursor forward FF
+# Cursor home RS
+# Cursor up VT
+# Cursor supress ETB
+# Cursor enable CAN
+# Erase to end of line ESC,T
+# Erase to end of page ESC,Y
+# Erase screen SUB
+# Keyboard lock SI
+# Keyboard unlock SO
+# Read current cursor position ESC,?
+# Set Attribute ESC,0,x (see below for values of x)
+# Tag bit reset ESC,(
+# Tag bit set ESC,)
+# Transparent Print on ESC,3
+# Transparent Print off ESC,4
+#
+#
+# ATTRIBUTES
+#
+# Normal @ 0100
+# Half Intensity A 0101
+# Blinking B 0102
+# Half Intensity Blinking C 0103
+# Reverse Video P 0120
+# Reverse Video Half Intensity Q 0121
+# Reverse Video Blinking R 0122
+# Reverse Video Half Intensity
+# Blinking S 0123
+# Underlined ` 0140
+# Underlined Half Intensity a 0141
+# Underlined Blinking b 0142
+# Underlined Half Intensity
+# Blinking c 0143
+# Video suppress D 0104
+vp3a+|viewpoint3a+|adds viewpoint 3a+,
+ am, bw,
+ cols#80, it#8, lines#24,
+ blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
+ cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
+ ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
+ kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
+ nel=^M^J, rev=\E0P\E), rmso=\E(,
+ sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
+ sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
+vp60|viewpoint60|addsvp60|adds viewpoint60,
+ use=regent40,
+#
+# adds viewpoint 90 - from cornell
+# Note: emacs sends ei occasionally to insure the terminal is out of
+# insert mode. This unfortunately puts the viewpoint90 IN insert
+# mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
+# - :ei=:im=: must be present in the termcap translation.)
+# - <xhp> indicates glitch that attributes stick to location
+# - <msgr> means it's safe to move in standout mode
+# - <clear=\EG\Ek>: clears screen and visual attributes without affecting
+# the status line
+# Function key and label capabilities merged in from SCO.
+vp90|viewpoint90|adds viewpoint 90,
+ OTbs, bw, msgr, xhp,
+ cols#80, lines#24,
+ clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
+ dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
+ ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
+ kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
+ kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
+ kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
+ lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
+ lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
+ sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
+# Note: if return acts weird on a980, check internal switch #2
+# on the top chip on the CONTROL pc board.
+adds980|a980|adds consul 980,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
+ cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
+ dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
+ kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
+ kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
+
+#### C. Itoh Electronics
+#
+# As of 1995 these people no longer make terminals (they're still in the
+# printer business). Their terminals were all clones of the DEC VT series.
+# They're located in Orange County, CA.
+#
+
+# CIT 80 - vt-52 emulator, the termcap has been modified to remove
+# the delay times and do an auto tab set rather than the indirect
+# file used in vt100.
+cit80|cit-80|citoh 80,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
+ ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
+# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
+# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
+cit101|citc|C.itoh fast vt100,
+ OTbs, am, xenl,
+ cols#80, lines#24,
+ bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
+ dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
+ flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m,
+# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
+# The following termcap entry was created from the Callan cd100 entry. The
+# last two lines (with the capabilities in caps) are used by RM-cobol to allow
+# full selection of combinations of reverse video, underline, and blink.
+# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
+# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
+# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
+cit101e|C. Itoh CIT-101e,
+ OTbs, OTpt, am, mir, msgr,
+ cols#80, it#8, lines#24,
+ acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
+ cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
+ cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
+ el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
+ kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
+ rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
+ smkx=\E=, smso=\E[7m, smul=\E[4m,
+# From: David S. Lawyer, June 1997:
+# The CIT 101-e was made in Japan in 1983-4 and imported by CIE
+# Terminals in Irvine, CA. It was part of CITOH Electronics. In the
+# late 1980's CIT Terminals went out of business.
+# There is no need to use the initialization string is=... (by invoking
+# tset or setterm etc.) provided that the terminal has been manually set
+# up (and the setup saved with ^S) to be compatible with this termcap. To be
+# compatible it should be in ANSI mode (not VT52). A set-up that
+# works is to set all the manually setable stuff to factory defaults
+# by pressing ^D in set-up mode. Then increse the brighness with the
+# up-arrow key since the factory default will likely be dim on an old
+# terminal. Then change any options you want (provided that they are
+# compatible with the termcap). For my terminal I set: Screen
+# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
+# on. I also set up mine for parity (but you may not need it). Then
+# save the setup with ^S.
+# (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
+cit101e-rv|Citoh CIT-101e (sets reverse video),
+ am, eo, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24,
+ OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
+ is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
+ kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
+ rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
+ sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
+ u7=\E[6n, u8=\E[?6c, u9=\E[c,
+cit101e-n|CIT-101e w/o am,
+ am@,
+ cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
+ use=cit101e,
+cit101e-132|CIT-101e with 132 cols,
+ cols#132,
+ kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
+cit101e-n132|CIT-101e with 132 cols w/o am,
+ am@,
+ cols#132,
+ cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
+ use=cit101e,
+# CIE Terminals CIT-500 from BRL
+# The following SET-UP modes are assumed for normal operation:
+# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
+# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
+# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements.
+# Hardware tabs are assumed to be set every 8 columns; they can be set up
+# by the "reset", "tset", or "tabs" utilities. No delays are specified; use
+# "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (cit500: I added <rmam>/<smam> based on the init string -- esr)
+cit500|CIE Terminals CIT-500,
+ OTbs, OTpt, mir, msgr, xon,
+ OTkn#10, cols#80, it#8, lines#64, vt#3,
+ acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
+ ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
+ kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
+ khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
+ lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
+ lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmso=\E[m, rmul=\E[m,
+ rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
+ sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+
+# C. Itoh printers begin here
+citoh|ci8510|8510|c.itoh 8510a,
+ cols#80, it#8,
+ bold=\E!, cub1@,
+ is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
+ rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
+ smul=\EX, use=lpr,
+citoh-pica|citoh in pica,
+ is1=\EN, use=citoh,
+citoh-elite|citoh in elite,
+ cols#96,
+ is1=\EE,
+ is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
+ use=citoh,
+citoh-comp|citoh in compressed,
+ cols#136,
+ is1=\EQ,
+ is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
+ use=citoh,
+# citoh has infinite cols because we don't want lp ever inserting \n\t**.
+citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
+ cols#32767,
+ is1=\EP, use=citoh,
+citoh-6lpi|citoh in 6 lines per inch mode,
+ is3=\EA, use=citoh,
+citoh-8lpi|citoh in 8 lines per inch mode,
+ lines#88,
+ is3=\EB, use=citoh,
+
+#### Control Data (cdc)
+#
+
+cdc456|cdc 456 terminal,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
+ el=^V, home=^Y, il1=\EL, ind=^J,
+
+# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
+cdc721|CDC Viking,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
+ cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
+ kcuu1=^W, khome=^Y,
+cdc721ll|CDC Vikingll,
+ OTbs, am,
+ cols#132, lines#24,
+ clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
+ cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
+ kcuu1=^W, khome=^Y,
+# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
+cdc752|CDC 752,
+ OTbs, am, bw, xhp,
+ cols#80, lines#24,
+ bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
+ cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
+ home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
+# CDC 756
+# The following switch/key settings are assumed for normal operation:
+# 96 chars SCROLL FULL duplex not BLOCK
+# Other switches may be set according to communication requirements.
+# Insert/delete-character cannot be used, as the whole display is affected.
+# "so" & "se" are commented out until jove handles "sg" correctly.
+cdc756|CDC 756,
+ OTbs, am, bw,
+ OTkn#10, cols#80, lines#24,
+ bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
+ cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
+ dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
+ kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
+ kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
+ kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
+ khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
+ lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
+ rs1=\031\030\002\003\017,
+#
+# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
+#
+# Part of the long initialization string defines the "DOWN" key to the left
+# of the tab key to send an ESC. The real ESC key is positioned way out
+# in right field.
+#
+# The termcap won't work in 132 column mode due to the way it it moves the
+# cursor. Termcap doesn't have the capability (as far as I could tell) to
+# handle the 721 in 132 column mode.
+#
+# (cdc721: changed :ri: to :sr: -- esr)
+cdc721-esc|Control Data 721,
+ OTbs, OTpt, am, bw, msgr, xon,
+ OTkn#10, cols#80, it#8, lines#30,
+ bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
+ cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
+ dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
+ ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
+ is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
+ kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
+ kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
+ kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
+ ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
+ sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
+ smso=^^D, smul=^\, tbc=^^^RY,
+
+#### Getronics
+#
+# Getronics is a Dutch electronics company that at one time was called
+# `Geveke' and made async terminals; but (according to the company itself!)
+# they've lost all their documentation on the command set. The hardware
+# documentation suggests the terminals were actually manufactured by a
+# Taiwanese electronics company named Cal-Comp. There are known
+# to have been at least two models, the 33 and the 50.
+#
+
+# The 50 seems to be a top end vt220 clone, with the addition of a higher
+# screen resolution, a larger screen, at least 1 page of memory above and
+# below the screen, apparently pages of memory right and left of the screen
+# which can be panned, and about 75 function keys (15 function keys x normal,
+# shift, control, func A, func B). It also has more setup possibilities than
+# the vt220. The monitor case is dated November 1978 and the keyboard case is
+# May 1982.
+#
+# The vt100 emulation works as is. The entry below describes the rather
+# non-conformant (but more featureful) ANSI mode.
+#
+# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
+visa50|geveke visa 50 terminal in ansi 80 character mode,
+ bw, mir, msgr,
+ cols#80, lines#25,
+ acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
+ blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
+ is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
+ ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
+ kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
+ kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
+ kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
+ kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
+ lf3=A insert line, lf4=A delete line, lf5=A clear,
+ lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
+ lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
+ rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
+ smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd,
+
+#### Human Designed Systems (Concept)
+#
+# Human Designed Systems
+# 400 Fehley Drive
+# King of Prussia, PA 19406
+# Vox: (610)-277-8300
+# Fax: (610)-275-5739
+# Net: support@hds.com
+#
+# John Martin <john@hds.com> is their termcap expert. They're mostly out of
+# the character-terminal business now (1995) and making X terminals. In
+# particular, the whole `Concept' line described here was discontinued long
+# ago.
+#
+
+# From: <vax135!hpk> Sat Jun 27 07:41:20 1981
+# Extensive changes to c108 by arpavax:eric Feb 1982
+# Some unknown person at SCO then translated it to terminfo.
+#
+# There seem to be a number of different versions of the C108 PROMS
+# (with bug fixes in its Z-80 program).
+#
+# The first one that we had would lock out the keyboard of you
+# sent lots of short lines (like /usr/dict/words) at 9600 baud.
+# Try that on your C108 and see if it sends a ^S when you type it.
+# If so, you have an old version of the PROMs.
+#
+# You should configure the C108 to send ^S/^Q before running this.
+# It is much faster (at 9600 baud) than the c100 because the delays
+# are not fixed.
+# new status line display entries for c108-8p:
+# <is3> - init str #3 - setup term for status display -
+# set programmer mode, select window 2, define window at last
+# line of memory, set bkgnd stat mesg there, select window 0.
+#
+# <tsl> - to status line - select window 2, home cursor, erase to
+# end-of-window, 1/2 bright on, goto(line#0, col#?)
+#
+# <fsl> - from status line - 1/2 bright off, select window 0
+#
+# <dsl> - disable status display - set bkgnd status mesg with
+# illegal window #
+#
+# There are probably more function keys that should be added but
+# I don't know what they are.
+#
+# No delays needed on c108 because of ^S/^Q handshaking
+#
+c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
+ is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
+ rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
+c108-4p|concept108-4p|concept 108 w/4 pages,
+ OTbs, eslok, hs, xon,
+ pb@,
+ acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
+ cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
+ cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
+ ind=^J, is1=\EK\E!\E F,
+ is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
+ rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
+ smcup=\EU\Ev 8p\Ep\r\E\025,
+ tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
+c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
+ rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
+ use=c108-rv-4p,
+c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
+ flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
+ use=c108-4p,
+c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
+ cols#132,
+ is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
+ smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
+
+# Concept 100:
+# These have only window relative cursor addressing, not screen
+# relative. To get it to work right here, smcup/rmcup (which
+# were invented for the concept) lock you into a one page
+# window for screen style programs.
+#
+# To get out of the one page window, we use a clever trick:
+# we set the window size to zero ("\Ev " in rmcup) which the
+# terminal recognizes as an error and resets the window to all
+# of memory.
+#
+# This trick works on c100 but does not on c108, sigh.
+#
+# Some tty drivers use cr3 for concept, others use nl3, hence
+# the delays on cr and ind below. This padding is only needed at
+# 9600 baud and up. One or the other is commented out depending on
+# local conventions.
+#
+# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
+# less than 6 but more than 2 will work.
+#
+# Note: can't use function keys f7-f10 because they are
+# indistinguishable from arrow keys (!), also, del char and
+# clear eol use xon/xoff so they probably won't work very well.
+#
+# Also note that we don't define insrt/del char/delline/eop/send
+# because they don't transmit unless we reset them - I figured
+# it was a bad idea to clobber their definitions.
+#
+# The <mc5> sequence changes the escape character to ^^ so that
+# escapes will be passed through to the printer. Only trouble
+# is that ^^ won't be - ^^ was chosen to be unlikely.
+# Unfortunately, if you're sending raster bits through to be
+# plotted, any character you choose will be likely, so we lose.
+#
+# \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
+# cannot be # in is2 because it will hang a c100 with no printer
+# if sent twice.
+c100|concept100|concept|c104|c100-4p|hds concept 100,
+ OTbs, am, eo, mir, ul, xenl,
+ cols#80, lines#24, pb#9600, vt#8,
+ bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
+ cub1=^H, cud1=^J, cuf1=\E=,
+ cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
+ dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
+ ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
+ ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
+ is1=\EK,
+ is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
+ is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
+ kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
+ kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
+ kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
+ khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
+ kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
+ mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
+ rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
+ rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
+ rmso=\Ed, rmul=\Eg, sgr0=\EN@,
+ smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
+ smso=\ED, smul=\EG,
+c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
+ cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
+ smso=\EE, use=c100,
+oc100|oconcept|c100-1p|old 1 page concept 100,
+ in,
+ is3@, use=c100,
+
+# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
+# Lots of notes, originally inline, but ncurses doesn't grok that.
+#
+# am: not available in power on mode, but turned on with \E[=107;207h in
+# is2=. Also, \E=124l in is2= could have been used to prevent needing
+# to specify xenl:, but that would have rendered the last space on the
+# last line useless.
+# bw: Not available in power on mode, but turned on with \E[=107;207h in
+# is2=.
+# clear: Could be done with \E[2J alone, except that vi (and probably most
+# other programs) assume that this also homes the cursor.
+# dsl: Go to window 2, go to the beginning of the line, use a line feed to
+# scroll the window, and go back to window 1.
+# is2: the string may cause a warning to be issued by tic that it
+# found a very long line and that it suspects that a comma is missing
+# somewhere. This warning can be ignored (unless it comes up more than
+# once). The initialization string contains the following commands:
+#
+# [Setup mode items changed from factory defaults:]
+# \E)0 set alternate character set to
+# graphics
+# ^O set character set to default
+# [In case it wasn't]
+# \E[m turn off all attributes
+# [In case they weren't off]
+# \E[=107; cursor wrap and
+# 207h character wrap on
+# \E[90;3u set Fkey definitions to "transmit"
+# defaults
+# \E[92;3u set cursor key definitions to
+# "transmit" defaults
+# \E[43;1u set shift F13 to transmit...
+# \177\E$P\177
+# \E[44;1u set shift F14 to transmit...
+# \177\E$Q\177
+# \E[45;1u set shift F15 to transmit...
+# \177\E$R\177
+# \E[46;1u set shift F16 to transmit...
+# \177\E$S\177
+# \E[200;1u set shift up to transmit...
+# \177\E$A\177
+# \E[201;1u set shift down to transmit...
+# \177\E$B\177
+# \E[202;1u set shift right to transmit...
+# \177\E$C\177
+# \E[203;1u set shift left to transmit...
+# \177\E$D\177
+# \E[204;1u set shift home to transmit...
+# \177\E$H\177
+# \E[212;1u set backtab to transmit...
+# \177\E$I\177
+# \E[213;1u set shift backspace to transmit...
+# \177\E$^H\177
+# \E[214;1u set shift del to transmit...
+# "\E$\177"
+# [Necessary items not mentioned in setup mode:]
+# \E[2!w move to window 2
+# \E[25;25w define window as line 25 of memory
+# \E[!w move to window 1
+# \E[2*w show current line of window 2 as
+# status line
+# \E[2+x set meta key to use high bit
+# \E[;3+} move underline to bottom of character
+#
+# All Fkeys are set to their default transmit definitions with \E[90;3u
+# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
+# setting MUST be redefined or deactivated, because the default is
+# contained in almost all of this terminal's Fkey strings! If for some
+# reason "quit" cannot be altered, the Fkeys can, but it would be
+# necessary to change ^| to ^] in all of these definitions, and add
+# \E[2;029!t to is2.
+# lines: is set to 24 because this terminal refuses to treat the 25th
+# line normally.
+# ll: Not available in power on mode, but turned on with \E[=107;207h in
+# is2=.
+# lm: Pointless, given that this definition locks a single screen of
+# memory into view, but what the hey...
+# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
+# other attributes alone), but some programs expect this to turn off
+# everything.
+# rmul: Could use \E[4!{ to turn off only underline (leaving any other
+# attributes alone), but some programs expect this to turn off
+# everything.
+# sgr: Attributes are set on this terminal with the string \E[ followed by
+# a list of attribute code numbers (in decimal, separated by
+# semicolons), followed by the character m. The attribute code
+# numbers are:
+# 1 for bold;
+# 2 for dim (which is ignored in power on mode);
+# 4 for underline;
+# 5 for blinking;
+# 7 for inverse;
+# 8 for not displayable; and
+# =99 for protected (except that there are strange side
+# effects to protected characters which make them inadvisable).
+# The mapping of terminfo parameters to attributes is as follows:
+# %p1 (standout) = bold and inverse together;
+# %p2 (underline) = underline;
+# %p3 (reverse) = inverse;
+# %p4 (blink) = blinking;
+# %p5 (dim) is ignored;
+# %p6 (bold) = bold;
+# %p7 (invisible) = not displayable;
+# %p8 (protected) is ignored; and
+# %p9 (alt char set) = alt char set.
+# The code to do this is:
+# \E[0 OUTPUT \E[0
+# %?%p1%p6%O IF (standout; bold) OR
+# %t;1 THEN OUTPUT ;1
+# %; ENDIF
+# %?%p2 IF underline
+# %t;4 THEN OUTPUT ;4
+# %; ENDIF
+# %?%p4 IF blink
+# %t;5 THEN OUTPUT ;5
+# %; ENDIF
+# %?%p1%p3%O IF (standout; reverse) OR
+# %t;7 THEN OUTPUT ;7
+# %; ENDIF
+# %?%p7 IF invisible
+# %t;8 THEN OUTPUT ;8
+# %; ENDIF
+# m OUTPUT m
+# %?%p9 IF altcharset
+# %t^N THEN OUTPUT ^N
+# %e^O ELSE OUTPUT ^O
+# %; ENDIF
+# sgr0: Everything is turned off (including alternate character set), since
+# there is no way of knowing what it is that the program wants turned
+# off.
+# smul: The "underline" attribute is reconfigurable to an overline or
+# strikethru, or (as done with \E[;3+} in is2=), to a line at the true
+# bottom of the character cell. This was done to allow for more readable
+# underlined characters, and to be able to distinguish between an
+# underlined space, an underscore, and an underlined underscore.
+# xenl: Terminal can be configured to not need this, but this "glitch"
+# behavior is actually preferable with autowrap terminals.
+#
+# Parameters kf31= thru kf53= actually contain the strings sent by the shifted
+# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
+# string modifies the 'O' in kf43 to kf46 to a '$'.
+#
+# kcbt was originally ^I but redefined in is2=.
+# kHOM was \E[H originally but redefined in is2=, as were a number of
+# other keys.
+# kDC was originally \177 but redefined in is2=.
+#
+# kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
+# tsl: Go to window 2, then do an hpa=.
+#
+#------- flash=\E[8;3!}^G\E[3;3!}
+#------- flash=\E[?5h$<100>\E[?5l
+# There are two ways to flash the screen, both of which have their drawbacks.
+# The first is to set the bell mode to video, transmit a bell character, and
+# set the bell mode back - but to what? There is no way of knowing what the
+# user's old bell setting was before we messed with it. Worse, the command to
+# set the bell mode also sets the key click volume, and there is no way to say
+# "leave that alone", or to know what it's set to, either.
+# The second way to do a flash is to set the screen to inverse video, pad for a
+# tenth of a second, and set it back - but like before, there's no way to know
+# that the screen wasn't ALREADY in inverse video, or that the user may prefer
+# it that way. The point is moot anyway, since vi (and probably other
+# programs) assume that by defining flash=, you want the computer to use it
+# INSTEAD of bel=, rather than as a secondary type of signal.
+#
+#------- cvvis=\E[+{
+# The is the power on setting, which is also as visible as the cursor
+# gets.
+#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
+# Windowing is possible, but not defined here because it is also used to
+# emulate status line functions. Allowing a program to set a window could
+# clobber the status line or render it unusable. There is additional memory,
+# but screen scroll functions are destructive and do not make use of it.
+#
+#------- dim= Not available in power on mode.
+# You have a choice of defining low intensity characters as "half bright" and
+# high intensity as "normal", or defining low as "normal" and high as "bold".
+# No matter which you choose, only one of either "half bright" or "bold" is
+# available at any time, so taking the time to override the default is
+# pointless.
+#
+#------- prot=\E[=0;99m
+# Not defined, because it appears to have some strange side effects.
+#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
+#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
+#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
+# Available, but making them available to programs is inadvisable.
+# The code to do this is:
+# %?%p1%{24}%< IF ((key; 24) <;
+# %p1%{30}%> ((key; 30) >;
+# %p1%{54}%< (key; 54) <
+# %A ) AND
+# %O ) OR
+# [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
+# %t\E[ THEN OUTPUT \E[
+# %p1%d OUTPUT (key) as decimal
+# [next line applies to pfx only]
+# ;1 OUTPUT ;1
+# u OUTPUT u
+# \177 OUTPUT \177
+# %p2%s OUTPUT (string) as string
+# \177 OUTPUT \177
+# [DEL chosen as delimiter, but could be any character]
+# [implied: ELSE do nothing]
+# %; ENDIF
+#
+#------- rs2=
+# Not defined since anything it might do could be done faster and easier with
+# either Meta-Shift-Reset or the main power switch.
+#
+#------- smkx=\E[1!z
+#------- rmkx=\E[!z
+# These sequences apply to the cursor and setup keys only, not to the
+# numeric keypad. But it doesn't matter anyway, since making these
+# available to programs is inadvisable.
+# For the key definitions below, all sequences beginning with \E$ are
+# custom and programmed into the terminal via is2. \E$ also has no
+# meaning to any other terminal.
+#
+#------- cmdch=\E[;%p1%d!t
+# Available, but making it available to programs is inadvisable.
+#------- smxon=\E[1*q
+# Available, but making it available to programs is inadvisable.
+# Terminal will send XON/XOFF on buffer overflow.
+#------- rmxon=\E[*q
+# Available, but making it available to programs is inadvisable.
+# Terminal will not notify on buffer overflow.
+#------- smm=\E[2+x
+#------- rmm=\E[+x
+# Available, but making them available to programs is inadvisable.
+#
+# Printing:
+# It's not made clear in the manuals, but based on other ansi/vt type
+# terminals, it's a good guess that this terminal is capable of both
+# "transparent print" (which doesn't copy data to the screen, and
+# therefore needs mc5i: specified to say so) and "auxilliary print"
+# (which does duplicate printed data on the screen, in which case mc4=
+# and mc5= should use the \E[?4i and \E[?5i strings instead).
+
+hds200|Human Designed Systems HDS200,
+ am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, lm#0,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
+ clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
+ fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ invis=\E[0;8m,
+ is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
+ kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
+ kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
+ kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
+ kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
+ kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
+ kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
+ kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
+ kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
+ kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
+ kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
+ kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
+ kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
+ kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
+ kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
+ mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
+ rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
+ rmul=\E[m\017, sc=\E7,
+ sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
+ smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
+ vpa=\E[%i%p1%dd,
+
+# <ht> through <el> included to specify padding needed in raw mode.
+# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
+avt-ns|concept avt no status line,
+ OTbs, am, eo, mir, ul, xenl, xon,
+ cols#80, it#8, lines#24, lm#192,
+ acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
+ dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
+ hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
+ invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
+ is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
+ mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
+ prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
+ ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
+ rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
+ sc=\E7,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
+ sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
+ smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
+ tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
+avt-rv-ns|concept avt in reverse video mode/no status line,
+ flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
+ use=avt-ns,
+avt-w-ns|concept avt in 132 column mode/no status line,
+ is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
+ use=avt-ns,
+avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
+ flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
+ smcup=\E[H\E[1;24;1;132w, use=avt-ns,
+
+# Concept AVT with status line. We get the status line using the
+# "Background status line" feature of the terminal. We swipe the
+# first line of memory in window 2 for the status line, keeping
+# 191 lines of memory and 24 screen lines for regular use.
+# The first line is used instead of the last so that this works
+# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
+# assumes an 8 page AVT but lm isn't currently used anywhere.)
+#
+avt+s|concept avt status line changes,
+ eslok, hs,
+ lm#191,
+ dsl=\E[0*w, fsl=\E[1;1!w,
+ is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
+ rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
+ tsl=\E[2;1!w\E[;%p1%dH\E[2K,
+avt|avt-s|concept-avt|avt w/80 columns,
+ use=avt+s, use=avt-ns,
+avt-rv|avt-rv-s|avt reverse video w/sl,
+ flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
+ use=avt+s, use=avt-ns,
+avt-w|avt-w-s|concept avt 132 cols+status,
+ is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
+ use=avt+s, use=avt-ns,
+avt-w-rv|avt-w-rv-s|avt wide+status+rv,
+ flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
+ smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
+
+#### Contel Business Systems.
+#
+
+# Contel c300 and c320 terminals.
+contel300|contel320|c300|Contel Business Systems C-300 or C-320,
+ am, in, xon,
+ cols#80, lines#24, xmc#1,
+ bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+ dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
+ el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
+ hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
+ kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
+ kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
+ rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
+# Contel c301 and c321 terminals.
+contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
+ flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
+ use=contel300,
+
+#### Data General (dg)
+#
+# According to James Carlson <carlson@xylogics.com> writing in January 1995,
+# the terminals group at Data General was shut down in 1991; all these
+# terminals have thus been discontinued.
+#
+# DG terminals have function keys that respond to the SHIFT and CTRL keys,
+# e.g., SHIFT-F1 generates a different code from F1. To number the keys
+# sequentially, first the unmodified key codes are listed as F1 through F15.
+# Then their SHIFT versions are listed as F16 through F30, their CTRL versions
+# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
+# F46 through F60. This is done in the private "includes" below whose names
+# start with "dgkeys+".
+#
+# DG terminals generally support 8 bit characters. For each of these terminals
+# two descriptions are supplied:
+# 1) A default description for 8 bits/character communications, which
+# uses the default DG international character set and keyboard codes.
+# 2) A description with suffix "-7b" for 7 bits/character communications.
+# This description must use the NON-DEFAULT native keyboard language.
+
+# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
+# Ctrl/Shift fdkeys (kf34-kf44).
+
+dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
+ ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
+ kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
+ kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
+ kf11=\233011z, kf12=\233012z, kf13=\233013z,
+ kf14=\233014z, kf15=\233000z, kf16=\233101z,
+ kf17=\233102z, kf18=\233103z, kf19=\233104z,
+ kf2=\233002z, kf20=\233105z, kf21=\233106z,
+ kf22=\233107z, kf23=\233108z, kf24=\233109z,
+ kf25=\233110z, kf26=\233111z, kf27=\233112z,
+ kf28=\233113z, kf29=\233114z, kf3=\233003z,
+ kf30=\233100z, kf31=\233201z, kf32=\233202z,
+ kf33=\233203z, kf34=\233204z, kf35=\233205z,
+ kf36=\233206z, kf37=\233207z, kf38=\233208z,
+ kf39=\233209z, kf4=\233004z, kf40=\233210z,
+ kf41=\233211z, kf42=\233212z, kf43=\233213z,
+ kf44=\233214z, kf45=\233200z, kf46=\233301z,
+ kf47=\233302z, kf48=\233303z, kf49=\233304z,
+ kf5=\233005z, kf50=\233305z, kf51=\233306z,
+ kf52=\233307z, kf53=\233308z, kf54=\233309z,
+ kf55=\233310z, kf56=\233311z, kf57=\233312z,
+ kf58=\233313z, kf59=\233314z, kf6=\233006z,
+ kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
+ khome=\233H, kprt=\233i,
+
+dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
+ ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
+ kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
+ kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
+ kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
+ kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
+ kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
+ kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
+ kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
+ kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
+ kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
+ kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
+ kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
+ kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
+ kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
+ kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
+ kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
+ kf9=\E[009z, khome=\E[H, kprt=\E[i,
+
+dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
+ kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
+ kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
+ kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
+ kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
+ kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
+ kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
+ kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
+ kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
+ kf8=^^x, kf9=^^y, khome=^H,
+
+dgkeys+15|Private entry describing 15 DG mode special keys,
+ kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
+ kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
+ kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
+ kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
+ kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
+ kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
+ kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
+ kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
+ kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
+ kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
+ kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
+ kf9=^^y,
+
+# Data General color terminals use the "Tektronix" color model. The total
+# number of colors varies with the terminal model, as does support for
+# attributes used in conjunction with color.
+
+# Removed u7, u8 definitions since they conflict with tack:
+# Preserve user-defined colors in at least some cases.
+# u7=^^Fh,
+# Default is ACM mode.
+# u8=^^F}20^^Fi^^F}21,
+#
+dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
+ bce,
+ colors#16, ncv#53, pairs#256,
+ op=\036Ad\036Bd,
+ setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
+ setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
+ setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
+
+dg+fixed|Fixed color info for DG D430C terminals in DG mode,
+ use=dgunix+fixed,
+
+# Video attributes are coordinated using static variables set by "sgr", then
+# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
+# (D=dim, U=underline, B=blink, R=reverse.)
+dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
+ bce,
+ colors#8, ncv#16, pairs#64,
+ op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
+ setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+ setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+ setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+ setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+
+dg+color|Color info for Data General D470C terminals in ANSI mode,
+ colors#16, ncv#53, pairs#256,
+ setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+ setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+ setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+ use=dg+color8,
+
+dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
+ bce,
+ colors#8, ncv#16, pairs#64,
+ op=\036Ad\036Bd,
+ setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
+ setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
+ setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
+
+dgmode+color|Color info for Data General D470C terminals in DG mode,
+ colors#16, pairs#256,
+ setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
+ setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
+ use=dgmode+color8,
+
+dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
+ bce, ccc,
+ colors#52, ncv#53, pairs#26,
+ initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X,
+ oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
+ op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
+ scp=\036RG2%p1%02X,
+
+# Colors are in the order: normal, reverse, dim, dim + reverse.
+dg+ccc|Configurable color info for DG D430C terminals in DG mode,
+ bce, ccc,
+ colors#52, ncv#53, pairs#26,
+ initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
+ oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
+ op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
+ scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
+
+# The generic DG terminal type (an 8-bit-clean subset of the 6053)
+# Initialization string 1 sets:
+# ^R - vertical scrolling enabled
+# ^C - blinking enabled
+dg-generic|Generic Data General terminal in DG mode,
+ am, bw, msgr, xon,
+ cols#80, lines#24,
+ bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
+ cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
+ mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
+ smul=^T, use=dgkeys+11,
+
+# According to the 4.4BSD termcap file, the dg200 <cup> should be the
+# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
+# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
+# maybe they were originally nuls (which would fit).
+
+dg200|data general dasher 200,
+ OTbs, am, bw,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
+ cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
+ kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
+ kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
+ kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
+ smso=^^D, smul=^T,
+
+# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
+dg210|dg-ansi|Data General 210/211,
+ am,
+ cols#80, lines#24,
+ OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
+ nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m,
+ smul=\E[4;m,
+# From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
+# courtesy of Carlos Rucalde of Vantage Software, Inc.
+# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
+# I suspect the d200 function keys actually work on the dg211, check it out.)
+dg211|Data General d211,
+ cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
+ kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
+ rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
+
+# dg450 from Cornell (not official)
+dg450|dg6134|data general 6134,
+ cub1@, cuf1=^X, use=dg200,
+
+# Not official...
+# Note: lesser Dasher terminals will not work with vi because vi insists upon
+# having a command to move straight down from any position on the bottom line
+# and scroll the screen up, or a direct vertical scroll command. The 460 and
+# above have both, the D210/211, for instance, has neither. We must use ANSI
+# mode rather than DG mode because standard UNIX tty drivers assume that ^H is
+# backspace on all terminals. This is not so in DG mode.
+# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
+# grounds that there is no matching ":ml:"
+# fixed garbled ":k9=\E[00\:z:" capability -- esr)
+dg460-ansi|Data General Dasher 460 in ANSI-mode,
+ OTbs, am, msgr, ul,
+ cols#80, it#8, lines#24,
+ OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
+ dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
+ kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
+ kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
+ lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
+ ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
+ smul=\E[4m,
+# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
+# Data General 605x
+# Ought to work for a Model 6242, Type D210 as well as a 605x.
+# Note that the cursor-down key transmits ^Z. Job control users, beware!
+# This also matches a posted description of something called a `Dasher 100'
+# so there's a dg100 alias here.
+# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
+dg6053-old|dg100|data general 6053,
+ OTbs, am, bw, ul,
+ cols#80, lines#24,
+ OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
+ cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
+ home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
+ kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
+ kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
+ rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
+ smul=^T,
+
+# (Some performance can be gained over the generic DG terminal type)
+dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
+ xon@,
+ home=^P\0\0, ll=^P\0^W, use=dg-generic,
+
+# Like 6053, but adds reverse video and more keypad and function keys.
+d200|d200-dg|Data General DASHER D200,
+ bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
+ sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
+ sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
+ use=dg6053,
+
+# DASHER D210 series terminals in ANSI mode.
+# Reverse video, no insert/delete character/line, 7 bits/character only.
+#
+# Initialization string 1 sets:
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <4 - print characters regardless of attributes
+d210|d214|Data General DASHER D210 series,
+ am, bw, msgr, xon,
+ cols#80, lines#24,
+ bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
+ ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
+ sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
+ sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
+
+# DASHER D210 series terminals in DG mode.
+# Like D200, but adds clear to end-of-screen and needs XON/XOFF.
+d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
+ xon,
+ ed=^^FF, use=d200-dg,
+
+# DASHER D211 series terminals in ANSI mode.
+# Like the D210, but with 8-bit characters and local printer support.
+#
+# Initialization string 2 sets:
+# \E[2;1;1;1v
+# 2;1 - 8 bit operations
+# 1;1 - 8 bit (international) keyboard language
+# \E(B - default primary character set (U.S. ASCII)
+# \E)4 - default secondary character set (international)
+# ^O - primary character set
+#
+d211|d215|Data General DASHER D211 series,
+ km,
+ is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
+ use=d210,
+
+# Initialization string 2 sets:
+# \E[2;0;1;0v
+# 2;0 - 7 bit operations
+# 1;0 - 7 bit (native) keyboard language
+# \E(0 - default character set (the keyboard native language)
+# ^O - primary character set
+d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
+ km@,
+ is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
+
+# Like the D210 series, but adds support for 8-bit characters.
+#
+# Reset string 2 sets:
+# ^^N - secondary character set
+# ^^FS0> - 8 bit international character set
+# ^^O - primary character set
+# ^^FS00 - default character set (matching the native keyboard language)
+#
+d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
+ km,
+ rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
+
+d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
+ use=d211-dg,
+
+# Enhanced DG mode with changes to be more UNIX compatible.
+d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
+ mc5i,
+ it#8,
+ acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
+ clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
+ el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
+ is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
+ kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
+ kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
+ mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
+ rs2=\036N\036FS0E\036O\036FS00,
+ sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
+ sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
+ vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
+d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
+ lines#25,
+ is3=\036Fz2, use=d216+,
+
+d217-unix|Data General DASHER D217 in DG-UNIX mode,
+ use=d216-unix,
+d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
+ use=d216-unix-25,
+
+# DASHER D220 color terminal in ANSI mode.
+# Like the D470C but with fewer colors and screen editing features.
+#
+# Initialization string 1 sets:
+# \E[<0;<1;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <4 - print characters regardless of attributes
+# \E[m - all attributes off
+# Reset string 1 sets:
+# \Ec - initial mode defaults (RIS)
+#
+d220|Data General DASHER D220,
+ mc5i@,
+ dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
+ use=dg+color8, use=d470c,
+
+d220-7b|Data General DASHER D220 in 7 bit mode,
+ mc5i@,
+ dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
+ use=dg+color8, use=d470c-7b,
+
+# Initialization string 3 sets:
+# - default cursor (solid rectangle)
+# Reset string 2 sets:
+# ^^N - secondary character set
+# ^^FS0> - 8 bit international character set
+# ^^O - primary character set
+# ^^FS00 - default character set (matching the native keyboard language)
+#
+d220-dg|Data General DASHER D220 color terminal in DG mode,
+ mc5i@,
+ dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
+ rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
+ use=d470c-dg,
+
+# DASHER D230C color terminal in ANSI mode.
+# Like the D220 but with minor ANSI compatibility improvements.
+#
+d230c|d230|Data General DASHER D230C,
+ blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
+ rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
+ sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
+ sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
+ smul=\E[4;50m, use=dgkeys+7b, use=d220,
+
+d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
+ use=d220-dg,
+
+# DASHER D400/D450 series terminals.
+# These add intelligent features like insert/delete to the D200 series.
+#
+# Initialization string 2 sets:
+# ^^FQ2 - default cursor (solid rectangle)
+# ^^FW - character protection disabled
+# ^^FJ - normal (80 column) mode
+# ^^F\^ - horizontal scrolling enabled (for alignment)
+# ^^FX004? - margins at columns 0 and 79
+# ^^F] - horizontal scrolling disabled
+# ^^O - primary character set
+# ^^FS00 - default character set (the keyboard native language)
+# - (should reset scrolling regions, but that glitches the screen)
+# Reset string 1 sets:
+# ^^FA - all terminal defaults except scroll rate
+# Reset string 2 sets:
+# ^^F] - horizontal scrolling disabled
+# ^^FT0 - jump scrolling
+#
+d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
+ mc5i,
+ acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
+ cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
+ enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
+ ich1=^^J, il1=^^FH,
+ is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
+ ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
+ rs1=^^FA, rs2=\036F]\036FT0,
+ sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
+ sgr0=\017\025\035\036E\036O, smacs=^^N,
+ vpa=\020\177%p1%c, use=d210-dg,
+
+# DASHER D410/D460 series terminals in ANSI mode.
+# These add a large number of intelligent terminal features.
+#
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[5;0v - normal (80 column) mode
+# \E[1;1;80w - margins at columns 1 and 80
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
+#
+# Initialization string 2 sets:
+# \E[3;2;2;1;1;1v
+# 3;2 - default cursor (solid rectangle)
+# 2;1 - 8 bit operations
+# 1;1 - international keyboard language
+# \E(B - default primary character set (U.S. ASCII)
+# \E)4 - default secondary character set (international)
+# ^O - primary character set
+#
+# Reset string 1 sets:
+# \Ec - initial mode defaults (RIS)
+# \E[<2h - horizontal scrolling disabled
+#
+# Reset string 2 sets:
+# \E[4;0;2;1;1;1v
+# 4;0 - jump scrolling
+# 2;1 - 8 bit operations
+# 1;1 - 8 bit (international) keyboard language
+# \E(B - default primary character set (U.S. ASCII)
+# \E)4 - default secondary character set (international)
+#
+d410|d411|d460|d461|Data General DASHER D410/D460 series,
+ mc5i,
+ acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
+ cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
+ is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
+ is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
+ ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
+ rs2=\E[4;0;2;1;1;1v\E(B\E)4,
+ sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
+ sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
+
+# Initialization string 2 sets:
+# \E[3;2;2;0;1;0v
+# 3;2 - default cursor (solid rectangle)
+# 2;0 - 7 bit operations
+# 1;0 - 7 bit (native) keyboard language
+# \E(0 - default character set (the keyboard native language)
+# ^O - primary character set
+#
+# Reset string 2 sets:
+# \E[4;0;2;0;1;0v
+# 4;0 - jump scrolling
+# 2;0 - 7 bit operations
+# 1;0 - 7 bit (native) keyboard language
+# \E(0 - default character set (the keyboard native language)
+#
+d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
+ km@,
+ enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
+ rs2=\E[4;0;2;0;1;0v\E(0,
+ sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
+
+d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
+ km,
+ enacs@, rmacs=\036FS00,
+ sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
+ sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
+ use=d400-dg,
+
+# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
+#
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[5;1v - compressed (135 column) mode
+# \E[1;1;126 - margins at columns 1 and 126
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
+#
+# Reset string 1 sets:
+# \Ec - initial mode defaults (RIS)
+# \E[5;1v - compressed (135 column) mode
+# \E[1;1;126w - margins at columns 1 and 126
+# \E[<2h - horizontal scrolling disabled
+#
+d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
+ cols#126,
+ is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
+ rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
+
+d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
+ cols#126,
+ is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
+ rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
+
+d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
+ use=d410-dg,
+
+# These add intelligent features like scrolling regions.
+d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
+ civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
+ cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
+ home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
+ is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
+ ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
+ rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
+ vpa=\036FPFF%p1%2.2X,
+ wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
+ use=d216+,
+d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
+ cols#132,
+ is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
+ rs2=\036P@1\036FK\036FX0083,
+ wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
+ use=d412-unix,
+d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
+ lines#25,
+ is3=\036Fz2,
+ wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
+ use=d462+,
+d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
+ eslok, hs,
+ clear=\036FG\036PH, fsl=\036F}01\022,
+ is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
+ tsl=\036F}00\036FP%p1%2.2X18\036PG,
+ wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
+ use=d462+,
+
+# Relative cursor motions are confined to the current window,
+# which is not what the scrolling region specification expects.
+# Thus, relative vertical cursor positioning must be deleted.
+d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
+ csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
+ cud1@, cuu1@, ll@, use=d462+,
+
+d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
+ use=d412-unix,
+d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
+ use=d412-unix-w,
+d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
+ use=d412-unix-25,
+d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
+ use=d412-unix-s,
+d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
+ use=d412-unix-sr,
+
+d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
+ use=d413-unix,
+d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
+ use=d413-unix-w,
+d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
+ use=d413-unix-25,
+d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
+ use=d413-unix-s,
+d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
+ use=d413-unix-sr,
+
+d430c-dg|d430-dg|Data General D430C in DG mode,
+ use=d413-dg, use=dg+fixed,
+d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
+ use=d413-dg, use=dg+ccc,
+
+d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
+ use=d413-unix, use=dgunix+fixed,
+d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
+ use=d413-unix-w, use=dgunix+fixed,
+d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
+ use=d413-unix-25, use=dgunix+fixed,
+d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
+ use=d413-unix-s, use=dgunix+fixed,
+d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
+ use=d413-unix-sr, use=dgunix+fixed,
+d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
+ use=d413-unix, use=dgunix+ccc,
+d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
+ use=d413-unix-w, use=dgunix+ccc,
+d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
+ use=d413-unix-25, use=dgunix+ccc,
+d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
+ use=d413-unix-s, use=dgunix+ccc,
+d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
+ use=d413-unix-sr, use=dgunix+ccc,
+
+# DASHER D470C color terminal in ANSI mode.
+# Like the D460 but with 16 colors and without a compressed mode.
+#
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[1;1;80w - margins at columns 1 and 80
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
+#
+d470c|d470|Data General DASHER D470C,
+ is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
+ sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
+ use=dg+color, use=d460,
+
+d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
+ is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
+ sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
+ use=dg+color, use=d460-7b,
+
+# Initialization string 2 sets:
+# ^^FQ2 - default cursor (solid rectangle)
+# ^^FW - character protection disabled
+# ^^F\^ - horizontal scrolling enabled (for alignment)
+# ^^FX004? - margins at columns 0 and 79
+# ^^F] - horizontal scrolling disabled
+# ^^O - primary character set
+# ^^FS00 - default character set (the keyboard native language)
+# - (should reset scrolling regions, but that glitches the screen)
+#
+d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
+ is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
+ use=dgmode+color, use=d460-dg,
+
+# DASHER D555 terminal in ANSI mode.
+# Like a D411, but has an integrated phone.
+d555|Data General DASHER D555,
+ use=d411,
+d555-7b|Data General DASHER D555 in 7-bit mode,
+ use=d411-7b,
+d555-w|Data General DASHER D555 in wide mode,
+ use=d411-w,
+d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
+ use=d411-7b-w,
+d555-dg|Data General DASHER D555 series in DG mode,
+ use=d411-dg,
+
+# DASHER D577 terminal in ANSI mode.
+# Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
+d577|Data General DASHER D577,
+ use=d411,
+d577-7b|Data General DASHER D577 in 7-bit mode,
+ use=d411-7b,
+d577-w|Data General DASHER D577 in wide mode,
+ use=d411-w,
+d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
+ use=d411-7b-w,
+
+d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
+ use=d411-dg,
+
+# DASHER D578 terminal.
+# Like a D577, but without compressed mode; like a D470C in this respect.
+#
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[1;1;80w - margins at columns 1 and 80
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
+#
+d578|Data General DASHER D578,
+ is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
+d578-7b|Data General DASHER D578 in 7-bit mode,
+ is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
+
+#### Datamedia (dm)
+#
+# Datamedia was headquartered in Nashua, New Hampshire until it went
+# out of business in 1993, but the ID plates on the terminals referred
+# to the factory in Pennsauken, NJ. The factory was sold to a PCB board
+# manufacturer which threw out all information about the terminals.
+#
+
+cs10|colorscan|Datamedia Color Scan 10,
+ msgr,
+ cols#80, lines#24,
+ bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+cs10-w|Datamedia Color Scan 10 with 132 columns,
+ cols#132,
+ cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
+
+# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
+dm1520|dm1521|datamedia 1520,
+ OTbs, am, xenl,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
+ khome=^Y,
+# dm2500: this terminal has both <ich> and <smir>. Applications using
+# termcap/terminfo directly (rather than through ncurses) might be confused.
+dm2500|datamedia2500|datamedia 2500,
+ OTbs, OTnc,
+ cols#80, lines#24,
+ bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
+ cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
+ dch1=\020\010\030\035$<10*>,
+ dl1=\020\032\030\035$<10*>, el=^W, home=^B,
+ ich1=\020\034\030\035$<10*>,
+ il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
+ rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
+ smdc=^P, smir=^P, smso=^N,
+# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
+# also, has a meta-key.
+# From: <goldberger@su-csli.arpa>
+# (dmchat: ":MT:" changed to ":km:" -- esr)
+dmchat|dmchat version of datamedia 2500,
+ km,
+ dl1=\020\032\030\035$<2/>,
+ il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
+# (dm3025: ":MT:" changed to ":km:" -- esr)
+dm3025|datamedia 3025a,
+ OTbs, km,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
+ dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
+ home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
+ is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
+ smir=\EP, smso=\EO1,
+dm3045|datamedia 3045a,
+ OTbs, am, eo, km@, ul, xenl,
+ dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
+ kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
+ kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
+ khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
+ use=dm3025,
+# Datamedia DT80 soft switches:
+# 1 0=Jump 1=Smooth
+# Autorepeat 0=off 1=on
+# Screen 0=Dark 1=light
+# Cursor 0=u/l 1=block
+#
+# 2 Margin Bell 0=off 1=on
+# Keyclick 0=off 1=on
+# Ansi/VT52 0=VT52 1=Ansi
+# Xon/Xoff 0=Off 1=On
+#
+# 3 Shift3 0=Hash 1=UK Pound
+# Wrap 0=Off 1=On
+# Newline 0=Off 1=On
+# Interlace 0=Off 1=On
+#
+# 4 Parity 0=Odd 1=Even
+# Parity 0=Off 1=On
+# Bits/Char 0=7 1=8
+# Power 0=60Hz 1=50Hz
+#
+# 5 Line Interface 0=EIA 1=Loop
+# Aux Interface 0=EIA 1=Loop
+# Local Copy 0=Off 1=On
+# Spare
+#
+# 6 Aux Parity 0=Odd 1=Even
+# Aux Parity 0=Off 1=On
+# Aux Bits/Char 0=7 1=8
+# CRT Saver 0=Off 1=On
+# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
+dm80|dmdt80|dt80|datamedia dt80/1,
+ clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
+ cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
+ rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+ use=vt100,
+# except in 132 column mode, where it needs a little padding.
+# This is still less padding than the vt100, and you can always turn on
+# the ^S/^Q handshaking, so you can use vt100 flavors for things like
+# reverse video.
+dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
+ cols#132,
+ clear=\E[H\E[2J$<50/>, cud1=^J,
+ cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
+ ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
+# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
+dt80-sas|Datamedia DT803/DTX for SAS usage,
+ am, bw,
+ cols#80, lines#24,
+ acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
+ bel=^G, clear=^L, cr=^M,
+ csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
+ cub1=^H, cud1=\EB, cuf1=^\,
+ cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
+ el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
+ is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
+ kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
+ rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
+ smso=\E$2\004, tbc=\E'0,
+
+# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
+# These aren't end-all Excel termcaps; but do insert/delete char/line
+# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
+# The naming convention has been bent somewhat, with the use of E? (where
+# E is for 'Excel') as # a name. This was done to distinguish the entries
+# from the other Datamedias in use here, and yet to associate a model of
+# the Excel terminals with the regular datamedia terminals that share
+# major characteristics.
+excel62|excel64|datamedia Excel 62,
+ dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
+ kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
+ use=dt80,
+excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
+ dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
+ kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
+ use=dt80w,
+excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
+ dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
+ kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
+ smir=\E[4h, use=dt80,
+
+#### Falco
+#
+# Falco Data Products
+# 440 Potrero Avenue
+# Sunnyvale, CA 940864-196
+# Vox: (800)-325-2648
+# Fax: (408)-745-7860
+# Net: techsup@charm.sys.falco.com
+#
+# Current Falco models as of 1995 are generally ANSI-compatible and support
+# emulations of DEC VT-series, Wyse, and Televideo types.
+#
+
+# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
+# This terminal was released around 1983 and was discontinued long ago.
+# The standout and underline highlights are the same.
+falco|ts1|ts-1|falco ts-1,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
+ ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
+ kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
+ smir=\Eq, smso=\Eg1, smul=\Eg1,
+falco-p|ts1p|ts-1p|falco ts-1 with paging option,
+ OTbs, am, da, db, mir, msgr, ul,
+ cols#80, it#8, lines#24,
+ bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
+ dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
+ il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
+ rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
+ smso=\Eg4, smul=\Eg1,
+# (ts100: I added <rmam>/<smam> based on the init string -- esr)
+ts100|ts100-sp|falco ts100-sp,
+ am, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
+ el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
+ ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ use=vt100+fnkeys,
+ts100-ctxt|falco ts-100 saving context,
+ rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
+
+#### Florida Computer Graphics
+#
+
+# Florida Computer Graphics Beacon System, using terminal emulator program
+# "host.com", as provided by FCG. This description is for an early release
+# of the "host" program. Known bug: <ed> clears the whole screen, so it's
+# commented out.
+
+# From: David Bryant <cbosg!djb> 1/7/83
+beacon|FCG Beacon System,
+ am, da, db,
+ cols#80, lines#32,
+ bel=\ESTART\r\E37\r\EEND\r$<1>,
+ blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
+ cub1=^H, cud1=^J, cuf1=\EV,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
+ dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
+ ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
+ rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
+ rmul=\ESTART\r\E60\,0\r\EEND\r,
+ sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
+ smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
+ smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
+ smul=\ESTART\r\E60\,1\r\EEND\r,
+
+#### Fluke
+#
+
+# The f1720a differences from ANSI: no auto margin, destructive
+# tabs, # of lines, funny highlighting and underlining
+f1720|f1720a|fluke 1720A,
+ xt,
+ cols#80, lines#16, xmc#1,
+ bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
+ el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
+ kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+ smso=\E[7m, smul=\E[4m,
+
+#### Liberty Electronics (Freedom)
+#
+# Liberty Electronics
+# 48089 Fremont Blvd
+# Fremont CA 94538
+# Vox: (510)-623-6000
+# Fax: (510)-623-7021
+
+# From: <faletti@berkeley.edu>
+# (f100: added empty <acsc> to suppress a tic warning;
+# made this relative to adm+sgr -- note that <invis> isn't
+# known to work for f100 but does on the f110. --esr)
+f100|freedom|freedom100|freedom model 100,
+ OTbs, am, bw, hs, mir, msgr, xon,
+ cols#80, lines#24,
+ acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
+ flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
+ ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
+ is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
+ kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
+ smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
+ vpa=\E[%p1%{32}%+%c, use=adm+sgr,
+f100-rv|freedom-rv|freedom 100 in reverse video,
+ flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
+# The f110 and f200 have problems with vi(1). They use the ^V
+# code for the down cursor key. When kcud1 is defined in terminfo
+# as ^V, the Control Character Quoting capability (^V in insert mode)
+# is lost! It cannot be remapped in vi because it is necessary to enter
+# a ^V to to quote the ^V that is being remapped!!!
+#
+# f110/f200 users will have to decide whether
+# to lose the down cursor key or the quoting capability. We will opt
+# initially for leaving the quoting capability out, since use of VI
+# is not generally applicable to most interactive applications
+# (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
+f110|freedom110|Liberty Freedom 110,
+ bw@, eslok,
+ it#8, wsl#80,
+ blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
+ dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
+ ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
+ kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
+ ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
+ smso=\EG<, tsl=\Ef, use=f100,
+f110-14|Liberty Freedom 110 14inch,
+ dch1@, use=f110,
+f110-w|Liberty Freedom 110 - 132 cols,
+ cols#132, use=f110,
+f110-14w|Liberty Freedom 110 14in/132 cols,
+ cols#132,
+ dch1@, use=f110,
+# (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+f200|freedom200|Liberty Freedom 200,
+ OTbs, am, eslok, hs, mir, msgr, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
+ clear=^Z, cnorm=\E.1, cr=^M,
+ csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
+ flash=\Eo$<200/>\En, fsl=^M, home=^^,
+ hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
+ kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
+ kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
+ ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
+ tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
+f200-w|Liberty Freedom 200 - 132 cols,
+ cols#132, use=f200,
+# The f200 has the ability to reprogram the down cursor key. The key is
+# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
+# so powering the terminal off and on will not cause the change to be lost.
+f200vi|Liberty Freedom 200 for vi,
+ flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
+f200vi-w|Liberty Freedom 200 - 132 cols for vi,
+ cols#132, use=f200vi,
+
+#### GraphOn (go)
+#
+# Graphon Corporation
+# 544 Division Street
+# Campbell, CA 95008
+# Vox: (408)-370-4080
+# Fax: (408)-370-5047
+# Net: troy@graphon.com (Troy Morrison)
+#
+#
+# The go140 and go225 have been discontinued. GraphOn now makes X terminals,
+# including one odd hybrid that starts out life on power-up as a character
+# terminal, than can be switched to X graphics mode (driven over the serial
+# line) by an escape sequence. No info on this beast yet.
+# (go140: I added <rmam>/<smam> based on the init string -- esr)
+go140|graphon go-140,
+ OTbs,
+ cols#80, it#8, lines#24,
+ clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J$<10/>, el=\E[K, ht=^I,
+ if=/usr/share/tabset/vt100, il1=\E[L,
+ is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+go140w|graphon go-140 in 132 column mode,
+ am,
+ cols#132,
+ is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
+ use=go140,
+# Hacked up vt200 termcap to handle GO-225/VT220
+# From: <edm@nwnexus.WA.COM>
+# (go225: I added <rmam>/<smam> based on the init string -- esr)
+go225|go-225|Graphon 225,
+ OTbs, am, mir, xenl,
+ cols#80, it#8, lines#25, vt#3,
+ blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
+ rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
+ rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
+ rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
+ sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
+ smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
+
+#### Harris (Beehive)
+#
+# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
+# Their terminal group is ancient history now (1995) though the parent
+# company is still in business.
+#
+
+# Beehive documentation is undated and marked Preliminary and has no figures
+# so we must have early Superbee2 (Model 600, according to phone conversation
+# with mfr.). It has proved reliable except for some missing padding
+# (notably after \EK and <nl> at bottom of screen).
+#
+# The key idea is that AEP mode is poison for <cup> & that US's in
+# the local memory should be avoided like the plague. That means
+# that the 2048 character local buffer is used as 25 lines of 80
+# characters, period. No scrolling local memory, folks. It also
+# appears that we cannot use naked INS LINE feature since it uses
+# US. The sbi fakes <il1> with an 80-space insert that may be too
+# slow at low speeds; also spaces get converted to \040 which is
+# too long for some programs (not vi). DEL LINE is ok but slow.
+#
+# The <nl> string is designed for last line of screen ONLY; cup to
+# 25th line corrects the motion inherent in scrolling to Page 1.
+#
+# There is one understood bug. It is that the screen appears to
+# pop to a new (blank) page after a <nel>, or leave a half-line
+# ellipsis to a quad that is the extra 48 memory locations. The
+# data received is dumped into memory but not displayed. Not to
+# worry if <cup> is being used; the lines not displayed will be,
+# whenever the cursor is moved up there. Since <cup> is addressed
+# relative to MEMORY of window, nothing is lost; but beware of
+# relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
+# therefore, is setenv MORE -c .
+#
+# WARNING: Not all features tested.
+#
+# Timings are assembled from 3 sources. Some timings may reflect
+# SB2/Model 300 that were used if more conservative.
+# Tested on a Model 600 at 1200 and 9600 bd.
+#
+# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
+# placed on the keyboard and useless because of AEP, is made
+# into a backspace key. In use ESC must be pressed twice (to send)
+# and sending ^C must be prefixed by ESC to avoid that weird
+# transmit mode associated with ENTER key.
+#
+# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
+# the screen, then it has dropped into ENTER mode; hit
+# RESET--ONLINE--!tset.
+#
+# As delivered this machine has a FATAL feature that will throw
+# it into that strange transmit state (SPOW) if the space bar is
+# hit after a CR is received, but before receiving a LF (or a
+# few others).
+#
+# The circuits MUST be modified to eliminate the SPOW latch.
+# This is done by strapping on chip A46 of the I/O board; cut
+# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
+# chip. This mod has been checked out on a Mod 600 of Superbee II.
+# With this modification absurdly high timings on cr are
+# unnecessary.
+#
+# NOTE WELL that the rear panel switch should be set to CR/LF,
+# not AEP!
+#
+sb1|beehive superbee,
+ OTbs, am, bw, da, db, mir, ul, xsb,
+ cols#80, lines#25, xmc#1,
+ bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
+ cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
+ cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
+ el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
+ il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
+ ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
+ kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
+ kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
+ krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
+ rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
+ smso=\E_1, smul=\E_0, tbc=\E3,
+sbi|superbee|beehive superbee at Indiana U.,
+ xsb,
+ cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
+ use=sb1,
+# Alternate (older) description of Superbee - f1=escape, f2=^C.
+# Note: there are at least 3 kinds of superbees in the world. The sb1
+# holds onto escapes and botches ^C's. The sb2 is the best of the 3.
+# The sb3 puts garbage on the bottom of the screen when you scroll with
+# the switch in the back set to CRLF instead of AEP. This description
+# is tested on the sb2 but should work on all with either switch setting.
+# The f1/f2 business is for the sb1 and the <xsb> can be taken out for
+# the other two if you want to try to hit that tiny escape key.
+# This description is tricky: being able to use cup depends on there being
+# 2048 bytes of memory and the hairy <nl> string.
+superbee-xsb|beehive super bee,
+ am, da, db, xsb,
+ cols#80, it#8, lines#25,
+ clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
+ cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
+ dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
+ home=\EH, ht=^I, hts=\E1,
+ ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
+ kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
+ khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
+# This loses on lines > 80 chars long, use at your own risk
+superbeeic|super bee with insert char,
+ ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
+sb2|sb3|fixed superbee,
+ xsb@, use=superbee,
+
+#### Beehive Medical Electronics
+#
+# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
+# Regarding your question though; Beehive terminals weren't made by Harris.
+# They were made by Beehive Medical Electronics in Utah. They went out of
+# business in the early '80s.
+#
+# (OK, then, I don't know why a couple of these say "harris beehive".)
+#
+
+# Reports are that most of these Beehive entries (except superbee) have not
+# been tested and do not work right. <rmso> is a trouble spot. Be warned.
+
+# (bee: <ich1> was empty, which is obviously bogus -- esr)
+beehive|bee|harris beehive,
+ OTbs, am, mir,
+ cols#80, lines#24,
+ cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
+ kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
+ krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
+ smir=\EQ, smso=\EdP, smul=\Ed`,
+# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
+# good grief - does this entry make :sg:/:ug: when it doesn't have to?
+# look at those spaces in <rmso>/<smso>. Seems strange to me...
+# (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
+# really care, cook up one using ^F -- esr)
+beehive3|bh3m|beehiveIIIm|harris beehive 3m,
+ OTbs, am,
+ cols#80, it#8, lines#20,
+ bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
+ dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
+ il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
+beehive4|bh4|beehive 4,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
+ cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
+# There was an early Australian kit-built computer called a "Microbee".
+# It's not clear whether this is for one of those or for a relative
+# of the Beehive.
+microb|microbee|micro bee series,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
+ kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
+ rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
+
+# 8675, 8686, and bee from Cyrus Rahman
+# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
+ha8675|harris 8675,
+ is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
+ kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
+ kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
+ kf8=\177, kf9=\Ee, use=bee,
+# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
+# in :is: -- esr)
+ha8686|harris 8686,
+ is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
+ kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
+ kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
+ kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
+ kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
+ use=bee,
+
+#### Hazeltine
+#
+# Hazeltine appears to be out of the terminal business as of 1995. These
+# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
+# Harris. They have a hazeltine.com domain (but no web page there ) and can
+# be reached at:
+#
+# Hazeltine
+# 450 East Pulaski Road
+# Greenlawn, New York 11740
+#
+# As late as 1993, manuals for the terminal product line could still be
+# purchased from:
+#
+# TRW Customer Service Division
+# 15 Law Drive
+# P.O. Box 2076
+# Fairfield, NJ 07007-2078
+#
+# They're now (1998) a subsidiary of General Electric, operating under the
+# marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
+# at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
+#
+
+# Since <cuf1> is blank, when you want to erase something you
+# are out of luck. You will have to do ^L's a lot to
+# redraw the screen. h1000 is untested. It doesn't work in
+# vi - this terminal is too dumb for even vi. (The code is
+# there but it isn't debugged for this case.)
+hz1000|hazeltine 1000,
+ OTbs,
+ cols#80, lines#12,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
+ ind=^J,
+# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
+hz1420|hazeltine 1420,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
+ cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
+ ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
+ smso=\E^_,
+# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
+# freakout with out-of-range args and tn3270. No hz since it needs to
+# receive tildes.
+hz1500|hazeltine 1500,
+ OTbs, am, hz,
+ cols#80, lines#24,
+ bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
+ cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
+ cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
+ il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
+ kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
+# h1510 assumed to be in sane escape mode. Else use h1500.
+# (h1510: early versions of this entry apparently had "<rmso=\E^_>,
+# <smso=\E^Y>, but these caps were commented out in 8.3; also,
+# removed incorrect and overridden ":do=^J:" -- esr)
+hz1510|hazeltine 1510,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
+ cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
+ el=\E^O, il1=\E^Z, ind=^J,
+# Hazeltine 1520
+# The following switch settings are assumed for normal operation:
+# FULL CR U/L_CASE ESCAPE
+# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
+# Other switches may be set for operator convenience or communication
+# requirements.
+hz1520|Hazeltine 1520,
+ OTbs, am, bw, msgr,
+ cols#80, lines#24,
+ bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
+ cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
+ ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
+ kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
+ kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
+ rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
+# This version works with the escape switch off
+# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
+hz1520-noesc|hazeltine 1520,
+ am, hz,
+ cols#80, lines#24,
+ bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
+ cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
+ home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
+# Note: the h1552 appears to be the first Hazeltine terminal which
+# is not braindamaged. It has tildes and backprimes and everything!
+# Be sure the auto lf/cr switch is set to cr.
+hz1552|hazeltine 1552,
+ OTbs,
+ cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
+ lf2=red, lf3=green, use=vt52,
+hz1552-rv|hazeltine 1552 reverse video,
+ cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
+# Note: h2000 won't work well because of a clash between upper case and ~'s.
+hz2000|hazeltine 2000,
+ OTbs, OTnc, am,
+ cols#74, lines#27,
+ bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
+ cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
+ il1=~\032$<6>, ind=^J, pad=\177,
+# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
+# I tested this termcap entry for the Hazeltine Esprit with vi. It seems
+# to work ok. There is one problem though if one types a lot of garbage
+# characters very fast vi seems not able to keep up and hangs while trying
+# to insert. That's in insert mode while trying to insert in the middle of
+# a line. It might be because the Esprit doesn't have insert char and delete
+# char as a built in function. Vi has to delete to end of line and then
+# redraw the rest of the line.
+esprit|Hazeltine Esprit I,
+ OTbs, am, bw,
+ cols#80, lines#24,
+ bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
+ cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
+ ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
+ kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
+ kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
+ kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
+ lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
+ rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
+esprit-am|hazeltine esprit auto-margin,
+ am, use=esprit,
+# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
+# Vi it seems always wants to send a control J for "do" and it turned out
+# that the terminal would work somewhat if the auto LF/CR was turned off.
+# (hmod1: removed :dn=~^K: -- esr)
+hmod1|Hazeltine Modular 1,
+ OTbs, am, hz,
+ cols#80, lines#24,
+ bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
+ cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
+ ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
+ rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
+#
+# Hazeltine Executive 80 Model 30 (1554?)
+# from Will Martin <control@ALMSA-1.ARPA> via BRL
+# Like VT100, except for different "am" behavior.
+hazel|exec80|h80|he80|Hazeltine Executive 80,
+ OTbs, OTpt, am,
+ cols#80, it#8, lines#24, vt#3,
+ OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
+ clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
+ cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
+ ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
+ is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
+ rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
+ rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
+ rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
+ smul=\E[4m$<2/>,
+
+#### IBM
+#
+
+ibm327x|line mode IBM 3270 style,
+ gn,
+ clear=^M^J, el=^M, home=^M,
+
+ibm3101|i3101|IBM 3101-10,
+ OTbs, am, xon,
+ cols#80, lines#24,
+ bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
+ibm3151|IBM 3151 display,
+ is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
+ sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
+ sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
+# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
+# removed kend, knp, kpp -TD
+ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
+ OTbs, am, mir, msgr,
+ cols#80, it#8, lines#24,
+ acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
+ bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
+ cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
+ invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
+ kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
+ kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
+ kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
+ kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
+ kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
+ kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
+ kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
+ ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
+ rmso=\E4@, rmul=\E4@,
+ sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
+ sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
+
+ibm3161-C|IBM 3161-C NLS terminal using cartridge,
+ rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
+ibm3162|IBM 3162 display,
+ blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
+ rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
+ use=ibm3161-C,
+
+# This really should not use setab/setaf, but it is clear that the
+# original terminfo does not toggle red/blue colors as in setb/setf.
+ibm3164|i3164|IBM 3164,
+ msgr,
+ colors#8, pairs#64,
+ op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
+ setab=\E4 %p1%{64}%+%c,
+ setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
+ smcup=\E!9/N\E>B, use=ibm3161,
+
+ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
+ am, bw, msgr, xon,
+ cols#80, it#8, lines#25,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
+ hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
+ kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
+ kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
+ kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
+ kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
+ kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
+ kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
+ kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
+ kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
+ kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
+ kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
+ kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
+ kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
+ krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
+ rmso=\E[m, rmul=\E[m, rs2=\Ec,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
+ sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+
+ibmaed|IBM Experimental display,
+ OTbs, am, eo, msgr,
+ cols#80, it#8, lines#52,
+ clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
+ dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
+ il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ rmso=\E0, sgr0=\E0, smso=\E0,
+ibm-apl|apl|IBM apl terminal simulator,
+ lines#25, use=dm1520,
+# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
+# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
+ibmmono|IBM workstation monochrome,
+ eslok, hs,
+ bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
+ invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
+ kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
+ khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
+ lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
+ sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
+ use=ibm3101,
+ibmega|IBM Enhanced Color Display,
+ cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
+ nel=^M^J, use=ibmmono,
+# This color scheme is assumed in some recent IBM terminal descriptions
+# (green on black, emulated on a 16-color terminal).
+ibm+color|IBM color definitions,
+ colors#8, ncv#3, pairs#64,
+ op=\E[32m\E[40m,
+ setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
+ setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
+ibm+16color|IBM aixterm color definitions,
+ colors#16, pairs#256,
+ setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
+ setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
+ setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+ setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+ibm5154|IBM 5154 Color display,
+ colors#8, ncv@, pairs#64,
+ bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
+ use=ibm+color,
+ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
+ rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
+ use=ibmmono,
+ibmvga-c|IBM VGA display color termcap,
+ cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
+ nel=^M^J, use=ibmega-c,
+ibmvga|IBM VGA display,
+ cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
+ nel=^M^J, use=ibmega,
+# ibmapa* and ibmmono entries come from ACIS 4.3 distribution
+rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
+ lines#32,
+ dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
+ibm6155|IBM 6155 Black & White display,
+ blink@, bold@, use=ibm5151,
+# Advanced Monochrome (6153) and Color (6154) Graphics Display:
+ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
+ lines#31,
+ dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
+ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
+ lines#31,
+ dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
+ use=ibmega-c,
+ibm6154|IBM 6154 Color displays,
+ blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
+ sgr0=\E[0;10m, use=ibm5154,
+ibm6153|IBM 6153 Black & White display,
+ blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
+ sgr0=\E[0;10m, use=ibm5151,
+ibm6153-90|IBM 6153 Black & White display,
+ cols#90, lines#36,
+ blink@, bold@, use=ibm5151,
+ibm6153-40|IBM 6153 Black & White display,
+ cols#40, lines#12, use=ibm6153-90,
+ibm8512|ibm8513|IBM color VGA Terminal,
+ am, mir, msgr,
+ cols#80, it#8, lines#25,
+ acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
+ clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
+ il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
+ kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
+ kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
+ kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
+ rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
+ rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+ rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
+ smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
+ smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ use=ibm8503,
+hft-c|HFT with Color,
+ colors#8, pairs#64,
+ acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
+ use=ibm5151, use=ibm+color,
+hft-c-old|HFT with Color PC850,
+ colors#8, pairs#64,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
+ use=ibm+color,
+hft-old|AIWS High Function Terminal,
+ am, xon,
+ cols#80, lines#25,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
+ ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
+ kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
+ kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
+ ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
+ibm-system1|system1|ibm system/1 computer,
+ am, xt,
+ cols#80, lines#24,
+ bel=^G, clear=^Z, cub1=^H, cuf1=^\,
+ cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
+ ind=^J,
+# lft-pc850 : IBM Low Function Terminal Device
+# lft "supports" underline, bold, and blink in the sense that the lft code
+# sets all the right bits. HOWEVER, depending upon the adapter, these
+# attributes may or may not be supported by the device driver.
+lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
+ am, bw, msgr, xon,
+ cols#80, it#8, lines#25,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
+ home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
+ il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
+ kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
+ kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
+ kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
+ kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
+ kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
+ kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
+ kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
+ kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
+ kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
+ kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
+ kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
+ kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
+ kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
+ rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g,
+ibm5081|hft|IBM Megapel Color display,
+ acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
+ s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
+ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
+ eslok, hs,
+ lines#33,
+ dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
+ use=ibmega-c,
+ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
+ use=hft-c,
+ibm8514|IBM 8514/a color VGA display,
+ eslok, hs,
+ dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
+ibm8514-c|IBM 8514 color display with standout and underline,
+ eslok, hs,
+ lines#41,
+ cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
+ kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
+ use=ibmega-c,
+
+#
+# AIX entries. IBM ships these with AIX 3.2.5.
+# -- added rc, sc based on manpage -TD
+# Note that we could use ibm+16color, but that is not how IBM defines this one.
+aixterm|IBM Aixterm Terminal Emulator,
+ eslok, hs,
+ acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
+ fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
+aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
+ eslok, hs,
+ acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
+ fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+ sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
+aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
+ eslok, hs,
+ bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+ tsl=\E[?%p1%dT, use=ibm6153,
+jaixterm|IBM Kanji Aixterm Terminal Eemulator,
+ acsc@, use=aixterm,
+jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
+ acsc@, use=aixterm-m,
+
+# This flavor is adapted from xterm, in turn from aixterm documentation -TD
+aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
+ use=ibm+16color, use=aixterm,
+
+#### Infoton/General Terminal Corp.
+#
+
+# gt100 sounds like something DEC would come out with. Let's hope they don't.
+i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
+ ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
+ ind=^J, rmso=\Ea, smso=\Eb,
+i400|infoton 400,
+ OTbs, am,
+ cols#80, lines#25,
+ bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
+ dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
+ il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
+# (addrinfo: removed obsolete ":bc=^Z:" -- esr)
+addrinfo,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
+ cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
+# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
+infoton,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
+ ed=^K, ind=^J, ll=^H^\,
+
+# The ICL6402 was actually the Kokusai Display System 6402.
+# The 6404 was the KDS7372 (color version of the 6402).
+#
+# ICL6404 control codes follow:
+#
+#code function
+#~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#ctrl-A set SOM position at cursor position
+#ctrl-G Bell
+#ctrl-H Backspace
+#ctrl-I Horiz tab
+#ctrl-J Linefeed
+#ctrl-K Cursor up
+#ctrl-L Cursor right
+#ctrl-M Carriage return
+#ctrl-N Disable xon/xoff to host
+#ctrl-O Enable xon/xoff to host
+#ctrl-R Enable bidirectional mode
+#ctrl-T Disable bidirectional mode
+#ctrl-V Cursor down
+#ctrl-Z Clear unprotected data to insert char
+#ctrl-^ Cursor home
+#ctrl-_ Newline
+#
+#ESC lead-in char for multiple character command
+#
+#ESC space R execute power on sequence
+#ESC ! p1 p2 define scroll region:
+# p1 = scroll top line: 20h - 37h
+# p1 = scroll bottom line: 20h - 37h
+#ESC " unlock keyboard
+#ESC # lock keyboard
+#ESC $ Semi-graphics mode on
+#ESC % Semi-graphics mode off
+#ESC & protect mode on
+#ESC ' protect mode off
+#ESC ( write protect mode off (full intensity)
+#ESC ) write protect mode on (half intensity)
+#
+#ESC * clear screen
+#ESC + clear unprotected data to insert char
+#ESC , clear unprotected data to half intensity spaces
+#ESC - p1 p2 p3 p4 address cursor to page, row, column:
+# p1 = page number 0 - 3
+# p2 = row 20h - 7fh
+# p3 = column (lo) 20h - 7fh
+# p4 = column (hi) 20h - 21h (only 132 col)
+#ESC . p1 set cursor style:
+# p1 = 0 invisible cursor
+# p1 = 1 block blinking cursor
+# p1 = 2 block steady cursor
+# p1 = 3 underline blinking cursor
+# p1 = 4 underline steady cursor
+#ESC / transmit cursor location (page, row, column)
+#ESC 0 p1 p2 p3 p4 program edit key:
+# p1 = edit key code: '@'-'S', '`'-'s'
+# p2 p3 p4 = program data (3 bytes)
+#
+#ESC 1 set tab
+#ESC 2 clear tab at cursor
+#ESC 3 clear all tabs
+#ESC 4 send unprotect line to cursor
+#ESC 5 send unprotect page to cursor
+#ESC 6 send line to cursor
+#ESC 7 send page to cursor
+#ESC 8 n set scroll mode:
+# n = 0 set jump scroll
+# n = 1 set smooth scroll
+#ESC 9 n control display:
+# n = 0 display off
+# n = 1 display on
+#ESC : clear unprotected data to null
+#ESC ; clear unprotected data to insert char
+#
+#ESC < keyclick on
+#ESC = p1 p2 address cursor to row, column
+# p1 = row 20h - 7fh
+# p2 = column (lo) 20h - 7fh
+# p3 = column (hi) 20h - 21h (only 132 col)
+#ESC > keyclick off
+#ESC ? transmit cursor location (row, column)
+#
+#ESC @ copy print mode on
+#ESC A copy print mode off
+#ESC B block mode on
+#ESC C block mode off (conversation mode)
+#ESC D F set full duplex
+#ESC D H set half duplex
+#ESC E line insert
+#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
+# 0 = black, 1 = red, 2 = green, 3 = yellow
+# 4 = blue, 5 = magenta, 6 = cyan, 7 = white
+#ESC G n set serial field attribute (n = 30h - 3Fh)
+#ESC H n full graphics mode:
+# n = 0 exit full graphics mode
+# n = 1 enter full graphics mode
+#ESC I back tab
+#ESC J back page
+#ESC K forward page
+#
+#ESC L unformatted page print
+#ESC M L move window left (132 col mode only)
+#ESC M R move window right (132 col mode only)
+#ESC N set page edit (clear line edit)
+#ESC O set line edit (clear page edit)
+#ESC P formatted page print
+#ESC Q character insert
+#ESC R line delete
+#ESC S send message unprotected only
+#ESC T erase line to insert char
+#ESC U set monitor mode (see ESC X, ESC u)
+#
+#ESC V n select video attribute mode:
+# n = 0 serial field attribute mode
+# n = 1 parallel character attribute mode
+#ESC V 2 n define line attribute:
+# n = 0 single width single height
+# n = 1 single width double height
+# n = 2 double width single height
+# n = 3 double width double height
+#ESC V 3 n select character font:
+# n = 0 system font
+# n = 1 user defined font
+#ESC V 4 n select screen mode:
+# n = 0 page screen mode
+# n = 1 virtual screen mode
+#ESC V 5 n control mouse mode:
+# n = 0 disable mouse
+# n = 1 enable sample mode
+# n = 2 send mouse information
+# n = 3 enable request mode
+#ESC W character delete
+#ESC X clear monitor mode (see ESC U, ESC u)
+#ESC Y erase page to insert char
+#
+#ESC Z n send user/status line:
+# n = 0 send user line
+# n = 1 send status line
+# n = 2 send terminal ID
+#ESC [ p1 p2 p3 set character attribute (parallel char mode):
+# p1: 0 = normal
+# 1 = blank
+# 2 = blink
+# 3 = blink blank (= blank)
+# 4 = reverse
+# 5 = reverse blank
+# 6 = reverse blink
+# 7 = reverse blink blank (= reverse blank)
+# 8 = underline
+# 9 = underline blank
+# : = underline blink
+# ; = underline blink blank
+# < = reverse underline
+# = = reverse underline blank
+# > = reverse underline blink
+# ? = reverse underline blink blank
+# p2, p3: f/grnd, b/grnd colour
+# (see ESC F for colours)
+# use ZZ for mono, eg.
+# ESC [ 0 Z Z for normal
+# ESC [ 4 Z Z for inverse etc.
+#
+#ESC \ n set page size:
+# n = 1 24 lines/page
+# n = 2 48 lines/page
+# n = 3 72 lines/page
+# n = 4 96 lines/page
+#ESC ] n set Wordstar mode:
+# n = 0 normal (KDS7372) mode
+# n = 1 Wordstar mode
+#
+#ESC b set foreground colour screen
+#
+#ESC c n enter self-test mode:
+# n = 0 exit self test mode
+# n = 1 ROM test
+# n = 2 RAM test
+# n = 3 NVRAM test
+# n = 4 screen display test
+# n = 5 main/printer port test
+# n = 6 mouse port test
+# n = 7 graphics board test
+# n = 8 graphics memory test
+# n = 9 display all 'E'
+# n = : display all 'H'
+#ESC d set background colour screen
+#
+#ESC e n program insert char (n = insert char)
+#ESC f text CR load user status line with 'text'
+#
+#ESC g display user status line on 25th line
+#ESC h display system status line on 25th line
+#ESC i tab
+#ESC j reverse linefeed
+#ESC k n duplex/local edit mode:
+# n = 0 duplex edit mode
+# n = 1 local edit mode
+#ESC l n select virtual screen:
+# n = 0 screen 1
+# n = 1 screen 2
+#ESC m save current config to NVRAM
+#ESC n p1 select display screen:
+# p1 = 0 screen 1
+# p1 = 1 screen 2
+# p1 = 2 screen 3
+# p1 = 3 screen 4
+#ESC o p1 p2 set characters/line and attribute:
+# p1 = 0 80 chars/line
+#
+#ESC o p1 p2 set characters/line and attribute:
+# p1 = 0 80 chars/line
+# p1 = 1 132 chars/line
+# p2 = 0 single width single height
+# p2 = 1 single width double height
+# p2 = 2 double width single height
+# p2 = 3 double width double height
+#
+#ESC q insert mode on
+#ESC r edit mode on
+#ESC s send message all
+#ESC t erase line to null
+#ESC u clear monitor mode (see ESC U, ESC X)
+#ESC v autopage mode on
+#ESC w autopage mode off
+#ESC x p1 p2 p3 define delimiter code...
+#ESC y erase page to null
+#
+#ESC z 2 p1 p2 p3 p4 draw quadrangle:
+# p1 = starting row
+# p2 = starting column
+# p3 = end row
+# p4 = end column
+#
+#ESC { p1 p2 p3 p4 configure main port
+# (baud, stop bits, parity, word length)
+#
+#ESC | p1 p2 text Ctrl-Y program function key with 'text':
+# p1 = function key code:
+# '1' - ';' normal f1- f11
+# '<' - 'F' shifted f1 - f11
+# p2 = program mode:
+# 1 = FDX
+# 2 = LOC
+# 3 = HDX
+# Ctrl-Y = terminator
+# (use Ctrl-P to escape ^P, ^Y )
+#
+#ESC } p1 p2 p3 p4 configure printer port
+# (baud, stop bits, parity, word length)
+#ESC ~ send system status
+#
+# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
+#
+# Entry is by esr going solely on above information and is UNTESTED.
+# This actually looks a lot like a Televideo 9xx.
+# This entry uses page 0 and is monochrome; I'm not brave enough to try
+# to make color work without a test terminal. The <am> capability is a guess.
+# The initialization string sets conversation mode, blinking underline cursor,
+# full duplex, parallel attribute mode, display user status line, white
+# foreground, black background, normal highlight.
+#
+icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
+ OTbs, am, hs,
+ cols#80, lines#24,
+ bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
+ cnorm=\E.3, cr=^M,
+ csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
+ cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
+ hts=\E1, il1=\EE, invis=\E[1ZZ,
+ is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
+ rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
+ rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
+ sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
+ sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
+icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
+ rs2=\Eo1, use=icl6404,
+
+#### Interactive Systems Corp
+#
+# ISC used to sell OEMed and customized hardware to support ISC UNIX.
+# ISC UNIX still exists in 1995, but ISC itself is no more; they got
+# bought out by Sun.
+#
+
+# From: <cithep!eric> Wed Sep 16 08:06:44 1981
+# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
+# ":le=^_:" later overridden -- esr)
+intext|Interactive Systems Corporation modified owl 1200,
+ OTbs, am,
+ cols#80, it#8, lines#24, xmc#1,
+ bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
+ cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
+ dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
+ el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
+ kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
+ kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
+ kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
+ rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
+ smso=^V$\,,
+intext2|intextii|INTERACTIVE modified owl 1251,
+ am, bw, ul,
+ cols#80, lines#24, xmc#0,
+ bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
+ dl1=\E[M, ed=\E[J, el=\E[K,
+ flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
+ hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
+ kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
+ kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
+ kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
+ khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
+ lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
+ lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
+ smul=\E[18 D,
+
+#### Kimtron (abm, kt)
+#
+# Kimtron seems to be history, but as March 1998 these people are still
+# offering repair services for Kimtron equipment:
+#
+# Com/Pair Monitor Service
+# 1105 N. Cliff Ave.
+# Sioux Falls, South Dakota 57103
+#
+# WATS voice: 1-800/398-4946
+# POTS fax: +1 605/338-8709
+# POTS voice: +1 605/338-9650
+# Email: <compair@sd.cybernex.net>
+# Internet/Web: <http://www.com-pair.com>
+#
+# Kimtron entries include (undocumented) codes for: enter dim mode,
+# enter bold mode, enter reverse mode, turn off all attributes.
+#
+
+# Kimtron ABM 85 added by Dual Systems
+# (abm85: removed duplicated ":kd=^J:" -- esr)
+abm85|Kimtron ABM 85,
+ OTbs, am, bw, msgr,
+ cols#80, it#8, lines#24, xmc#1,
+ cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\Ey, el=\Et, ht=^I,
+ if=/usr/share/tabset/stdcrt, il1=\EE,
+ is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
+ kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
+ rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
+# Kimtron ABM 85H added by Dual Systems.
+# Some notes about the abm85h entries:
+# 1) there are several firmware revs of 85H in the world. Use abm85h-old for
+# firmware revs prior to SP51
+# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
+# abm85e entry if it is in tvi920 emulation mode. They are incompatible
+# in some places and NOT software settable i.e., <is2> can't fix it)
+# 3) In 85h mode, the arrow keys and special functions transmit when
+# the terminal is in dup-edit, and work only locally in local-edit.
+# Vi won't swallow `del char' for instance, but <smcup> turns on
+# dup-edit anyway so that the arrow keys will work right. If the
+# arrow keys don't work the way you like, change <smcup>, <rmcup>, and
+# <is2>. Note that 920E mode does not have software commands to toggle
+# between dup and local edit, so you get whatever was set last on the
+# terminal.
+# 4) <flash> attribute is nice, but seems too slow to work correctly
+# (\Eb<pad>\Ed)
+# 5) Make sure `hidden' attributes are selected. If `embedded' attributes
+# are selected, the <xmc@> entry should be removed.
+# 6) auto new-line should be on (selectable from setup mode only)
+#
+# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
+abm85h|Kimtron ABM 85H native mode,
+ hs,
+ xmc@,
+ bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
+ fsl=^M, invis@,
+ is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
+ kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
+ use=abm85,
+abm85e|Kimtron ABM 85H in 920E mode,
+ xmc@,
+ bel=^G, dim=\E), flash@,
+ is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
+ rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
+abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
+ xmc@,
+ bel=^G, dim=\E),
+ is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
+ rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
+# From: <malman@bbn-vax.arpa>
+# (kt7: removed obsolete :ma=^V^J^L :" -- esr)
+kt7|kimtron model kt-7,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
+ if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
+ kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
+ kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
+ kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
+# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
+# other kt7 entry and the adjacent key capabilities). Removed EE which is
+# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
+# but we can't figure out what.
+kt7ix|kimtron model kt-7 or 70 in IX mode,
+ am, bw,
+ cols#80, it#8, lines#25,
+ acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
+ civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
+ home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
+ is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
+ ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
+ nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
+ sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
+
+#### Microdata/MDIS
+#
+# This was a line of terminals made by McDonnell-Douglas Information Systems.
+# These entries come direct from MDIS documentation. I have edited them only
+# to move primary names of the form p[0-9] * to aliases, and to comment out
+# <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
+# also removed the change history; the last version indicates this is
+# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
+#
+
+# McDonnell Information Systems Terminal Family History
+# =========================================
+#
+# Prism-1, Prism-2 and P99:
+# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
+#
+# Prism-4 and Prism-5:
+# Slightly less ancient range of Microdata terminals. Follow-on from
+# Prism-2, but with many enhancements. P5 has eight display pages.
+#
+# Prism-6:
+# A special terminal for use with library systems, primarily in Germany.
+# Limited numbers. Similar functionality to P5 (except attributes?).
+#
+# Prism-7, Prism-8 and Prism-9:
+# More recent range of MDIS terminals, in which P7 and P8
+# replace the P4 & P5, with added functionality, and P9 is the flagship.
+# The P9 has two emulation modes - P8 and ANSI - and includes a
+# large number of the DEC VT220 control sequences. Both
+# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
+#
+# Prism-12 and Prism-14:
+# Latest range, functionally very similar to the P9. The P14 has a
+# black-on-white overscanning screen.
+#
+# The terminfo definitions given here are:
+#
+# p2 - Prism-2 (or Prism-1 or P99).
+#
+# p4 - Prism-4 (and older P7s & P8s).
+# p5 - Prism-5 (or Prism-6).
+#
+# p7 - Prism-7.
+# p8 - Prism-8 (in national or multinational mode).
+# p8-w - 132 column version of p8.
+# p9 - Prism-9 in ANSI mode.
+# p9-w - 132 column version of p9.
+# p9-8 - Prism-9 in Prism-8 emulation mode.
+# p9-8-w - As p9-8, but with 132 columns.
+#
+# p12 - Prism-12 in ANSI mode.
+# p12-w - 132 column version of p12.
+# p12-m - Prism-12 in MDC emulation mode.
+# p12-m-w - As p12-m, but with 132 columns.
+# p14 - Prism-14 in ANSI mode.
+# p14-w - 132 column version of p14.
+# p14-m - Prism-14 in MDC emulation mode.
+# p14-m-w - As p14-m, but with 132 columns.
+#
+# p2: Prism-2
+# -----------
+#
+# Includes Prism-1 and basic P99 without SP or MP loaded.
+# The simplest form of Prism-type terminal.
+# Basic cursor movement and clearing operations only.
+# No video attributes.
+# Notes:
+# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
+# value up, followed by backspace.
+#
+prism2|MDC Prism-2,
+ am, bw, msgr,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
+ cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
+ cuu1=^Z, ed=\EJ, el=\EK, home=^A,
+ hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
+ ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
+
+# p4: Prism-4
+# -----------
+#
+# Includes early versions of P7 & P8.
+# Basic family definition for most Prisms (except P2 and P9 ANSI).
+# Notes:
+# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
+# value up, followed by backspace.
+# Cursor key definitions removed because they interfere with vi and csh keys.
+#
+prism4|p4|P4|MDC Prism-4,
+ am, bw, hs, mc5i, msgr,
+ cols#80, lines#24, wsl#72, xmc#1,
+ bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
+ cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
+ cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
+ cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
+ fsl=^]\345, home=^A,
+ hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
+ ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
+ rev=^CD, rmso=^C\s, rmul=^C\s,
+ sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
+ sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
+ vpa=\013%p1%{32}%+%c,
+
+# p5: Prism-5
+# -----------
+#
+# Same definition as p4. Includes Prism-6 (not tested!).
+# Does not use any multi-page features.
+#
+prism5|p5|P5|MDC Prism-5,
+ use=p4,
+
+# p7: Prism-7
+# -----------
+#
+# Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
+# Notes:
+# Use p4 for very early models of P7.
+# Rev-index removed; can't send nulls to terminal in 8-bit modes.
+#
+prism7|p7|P7|MDC Prism-7,
+ cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
+
+# p8: Prism-8
+# -----------
+#
+# Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
+# Supports national and multinational character sets.
+# Notes:
+# Alternate char set operations only work in multinational mode.
+# Use p4 for very early models of P8.
+# Rev-index removed; can't send nulls to terminal in 8-bit modes.
+# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
+#
+prism8|p8|P8|MDC Prism-8,
+ cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
+ vpa=\E[%i%p1%dd, use=p4,
+
+# p8-w: Prism-8 in 132 column mode
+# --------------------------------
+#
+# 'Wide' version of p8.
+# Notes:
+# Rev-index removed; can't send nulls to terminal in 8-bit modes.
+#
+prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
+ cols#132,
+ is2=\E[<12h\E[<14h, use=p8,
+
+# p9: Prism-9 in ANSI mode
+# -------------------------
+#
+# The "flagship" model of this generation of terminals.
+# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
+# Notes:
+# Tabs only reset by "reset". Otherwise assumes default (8 cols).
+# Fixes to deal with terminal firmware bugs:
+# . 'ri' uses insert-line since rev index doesn't always
+# . 'sgr0' has extra '0' since esc[m fails
+# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
+# Not covered in the current definition:
+# . Labels
+# . Programming Fn keys
+# . Graphic characters (defaults correctly to vt100)
+# . Padding values (sets xon)
+# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
+#
+prism9|p9|P9|MDC Prism-9 in ANSII mode,
+ am, bw, hs, mc5i, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3, wsl#72,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
+ clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
+ ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
+ ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
+ prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
+ ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
+ sc=\E[%y,
+ sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;,
+ sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[2g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
+
+# p9-w: Prism-9 in 132 column mode
+# --------------------------------
+#
+# 'Wide' version of p9.
+#
+prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
+ cols#132,
+ is2=\E[&p\E[<12l\E F\E[<14h,
+ rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
+
+# p9-8: Prism-9 in P8 mode
+# ------------------------
+#
+# P9 terminal in P8 emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
+#
+prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
+
+# p9-8-w: Prism-9 in P8 and 132 column modes
+# ------------------------------------------
+#
+# P9 terminal in P8 emulation mode and 132 column mode.
+#
+prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
+
+# p12: Prism-12 in ANSI mode
+# ---------------------------
+#
+# See p9 definition.
+#
+prism12|p12|P12|MDC Prism-12 in ANSI mode,
+ use=p9,
+
+# p12-w: Prism-12 in 132 column mode
+# ----------------------------------
+#
+# 'Wide' version of p12.
+#
+prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
+ use=p9-w,
+
+# p12-m: Prism-12 in MDC emulation mode
+# -------------------------------------
+#
+# P12 terminal in MDC emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
+#
+prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
+ use=p9-8,
+
+# p12-m-w: Prism-12 in MDC emulation and 132 column modes
+# -------------------------------------------------------
+#
+# P12 terminal in MDC emulation mode and 132 column mode.
+#
+prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
+ use=p9-8-w,
+
+# p14: Prism-14 in ANSII mode
+# ---------------------------
+#
+# See p9 definition.
+#
+prism14|p14|P14|MDC Prism-14 in ANSII mode,
+ use=p9,
+
+# p14-w: Prism-14 in 132 column mode
+# ----------------------------------
+#
+# 'Wide' version of p14.
+#
+prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
+ use=p9-w,
+
+# p14-m: Prism-14 in MDC emulation mode
+# -------------------------------------
+#
+# P14 terminal in MDC emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
+#
+prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
+ use=p9-8,
+
+# p14-m-w: Prism-14 in MDC emulation and 132 column modes
+# -------------------------------------------------------
+#
+# P14 terminal in MDC emulation mode and 132 column mode.
+#
+prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
+ use=p9-8-w,
+
+# End of McDonnell Information Systems Prism definitions
+
+# These things were popular in the Pick database community at one time
+# From: George Land <georgeland@aol.com> 24 Sep 1996
+p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
+ am, bw, hs, mir,
+ cols#80, lines#24, ma#1, wsl#78, xmc#1,
+ bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
+ ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
+ kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
+ kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
+ kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
+ lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
+ pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
+ smul=^C0,
+
+#### Microterm (act, mime)
+#
+# The mime1 entries refer to the Microterm Mime I or Mime II.
+# The default mime is assumed to be in enhanced act iv mode.
+#
+
+# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
+# freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
+# <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
+# since Sytek insists ^S means xoff.
+# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
+act4|microterm|microterm act iv,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
+ cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
+ cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
+ ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
+ il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
+ kcuu1=^Z,
+# The padding on :sr: and :ta: for act5 and mime is a guess and not final.
+# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
+# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
+act5|microterm5|microterm act v,
+ kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
+ use=act4,
+# Mimes using brightness for standout. Half bright is really dim unless
+# you turn up the brightness so far that lines show up on the screen.
+mime-fb|full bright mime1,
+ is2=^S\E, rmso=^S, smso=^Y, use=mime,
+mime-hb|half bright mime1,
+ is2=^Y\E, rmso=^Y, smso=^S, use=mime,
+# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
+# the more plausible ":do=^J:" -- esr)
+# uc was at one time disabled to get around a curses bug, be wary of it
+mime|mime1|mime2|mimei|mimeii|microterm mime1,
+ OTbs, am,
+ cols#80, it#8, lines#24, vt#9,
+ bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
+ cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
+ cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
+ il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
+ kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
+# These termcaps (for mime2a) put the terminal in low intensity mode
+# since high intensity mode is so obnoxious.
+mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
+ dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
+ il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
+ kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
+ smir=\EE, smso=\E\:, smul=\E6,
+# This is the preferred mode (but ^X can't be used as a kill character)
+mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
+ OTbs,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
+ dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
+ il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
+ rmul=\E5, smir=^O, smso=\E8, smul=\E4,
+# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
+mime3a|mime1 emulating 3a,
+ am@,
+ kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
+mime3ax|mime-3ax|mime1 emulating enhanced 3a,
+ it#8,
+ dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
+ use=mime3a,
+# Wed Mar 9 18:53:21 1983
+# We run our terminals at 2400 baud, so there might be some timing problems at
+# higher speeds. The major improvements in this model are the terminal now
+# scrolls down and insert mode works without redrawing the rest of the line
+# to the right of the cursor. This is done with a bit of a kludge using the
+# exit graphics mode to get out of insert, but it does not appear to hurt
+# anything when using vi at least. If you have some users using act4s with
+# programs that use curses and graphics mode this could be a problem.
+mime314|mm314|mime 314,
+ am,
+ cols#80, lines#24,
+ clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
+ dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
+ kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
+# Microterm mime 340 from University of Wisconsin
+mm340|mime340|mime 340,
+ cols#80, lines#24,
+ clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
+ el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
+ kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
+# This came from University of Wisconsin marked "astro termcap for jooss".
+# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
+# also added <rmam>/<smam> based on the init string -- esr)
+mt4520-rv|micro-term 4520 reverse video,
+ am, hs, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
+ fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
+ ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
+ ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
+ rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
+ sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[g, tsl=\E[25;1H,
+
+# Fri Aug 5 08:11:57 1983
+# This entry works for the ergo 4000 with the following setups:
+# ansi,wraparound,newline disabled, xon/xoff disabled in both
+# setup a & c.
+#
+# WARNING!!! There are multiple versions of ERGO 4000 microcode
+# Be advised that very early versions DO NOT WORK RIGHT !!
+# Microterm does have a ROM exchange program- use it or lose big
+# (ergo400: added <rmam>/<smam> based on the init string -- esr)
+ergo4000|microterm ergo 4000,
+ da, db, msgr,
+ cols#80, lines#66,
+ bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
+ el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
+ is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
+ lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
+ smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
+ smso=\E[7m$<20>,
+
+#### NCR
+#
+# NCR's terminal group was merged with AT&T's when AT&T bought the company.
+# For what happened to that group, see the ADDS section.
+#
+# There is an NCR4103 terminal that's just a re-badged Wyse-50.
+#
+
+# The following vendor-supplied termcaps were captured from the Boundless
+# Technologies site, 8 March 1998. I removed all-upper-case names that were
+# identical, except for case, to lower-case ones. I also uncommented the acsc
+# capabilities.X
+#
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
+ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
+ colors#8, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ use=ncr260vt300an,
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
+ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
+ colors#8, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ use=ncr260vt300wan,
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
+ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
+ colors#8, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ use=ncr260vt300pp,
+# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
+# DEC vt200/300 with color capabilities added.
+ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
+ colors#8, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ use=ncr260vt300wpp,
+# This definition for ViewPoint supports several attributes. This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies. The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed.
+# Mapping to ASCII character set ('acsc' capability) can also be
+# restored if needed.
+ncr260vppp|NCR 2900_260 viewpoint,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, lines#24, nlab#32, xmc#1,
+ acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
+ cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
+ cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
+ dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
+ el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
+ il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
+ is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
+ kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
+ kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
+ kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
+ kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
+ kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
+ kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
+ kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
+ kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
+ kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
+ kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
+ kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
+ mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
+ nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
+ rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
+ rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
+ sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
+ smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
+ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
+ cols#132,
+ cup=\Ea%i%p1%dR%p2%dC$<30>,
+ is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
+ rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
+ use=ncr260vppp,
+ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
+ am, hs, mir, msgr, xenl, xon,
+ cols#80, lines#24, nlab#32,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
+ cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
+ cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
+ cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
+ dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
+ ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
+ fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
+ hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
+ il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
+ invis=\E[8m,
+ is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
+ rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
+ rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
+ sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
+ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ use=ncr260vt100an,
+ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
+ is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
+ kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
+ lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
+ rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ smkx=\E=, use=ncr260vt100an,
+ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ use=ncr260vt100pp,
+ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
+ am, hs, mir, msgr, xenl, xon,
+ cols#80, lines#24, nlab#32,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
+ csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
+ cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
+ cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
+ cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
+ dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
+ ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
+ fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
+ ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
+ ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
+ is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
+ kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
+ kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
+ kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
+ kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
+ kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
+ mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
+ ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
+ rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
+ sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
+ use=vt220+keypad,
+ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
+ use=ncr260vt200an,
+ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
+ ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
+ kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
+ use=ncr260vt200an,
+ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ use=ncr260vt200pp,
+ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
+ am, hs, mir, msgr, xenl, xon,
+ cols#80, lines#24, nlab#32,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
+ csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
+ cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
+ cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
+ cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
+ dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
+ ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
+ fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
+ ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
+ ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
+ is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
+ kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
+ kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
+ kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
+ nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m,
+ rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
+ sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
+ use=vt220+keypad,
+ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
+ use=ncr260vt300an,
+ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
+ ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
+ kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
+ use=ncr260vt300an,
+NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
+ use=ncr260vt300pp,
+# This terminfo file contains color capabilities for the Wyse325 emulation of
+# the NCR 2900/260C color terminal. Because of the structure of the command
+# (escape sequence) used to set color attributes, one of the fore/background
+# colors must be preset to a given value. I have set the background color to
+# black. The user can change this setup by altering the last section of the
+# 'setf' definition. The escape sequence to set color attributes is
+# ESC d y <foreground_color> <background_color> 1
+# In addition, the background color can be changed through the desk accessories.
+# The capablitiy 'op' sets colors to green on black (default combination).
+#
+# NOTE: The NCR Unix System Administrator's Shell will not function properly
+# if the 'pairs' capability is defined. Un-Comment the 'pairs'
+# capability and recompile if you wish to have it included.
+#
+ncr260wy325pp|NCR 2900_260 wyse 325,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ colors#16, cols#80, lines#24, ncv#33, nlab#32,
+ acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
+ cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
+ cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
+ cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
+ ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
+ hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
+ is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
+ kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
+ kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
+ kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
+ kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
+ kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
+ kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
+ kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
+ kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
+ kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
+ mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
+ nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
+ rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
+ rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ setb=\s,
+ setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
+ sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
+ smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
+ tsl=\EF,
+ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
+ cols#132,
+ cup=\Ea%i%p1%dR%p2%dC$<30>,
+ is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ use=ncr260wy325pp,
+# This definition for Wyse 350 supports several attributes. This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies. The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed.
+# Mapping to ASCII character set ('acsc' capability) can also be
+# restored if needed.
+# In addition, color capabilities have been added to this file. The drawback,
+# however, is that the background color has to be black. The foreground colors
+# are numbered 0 through 15.
+#
+# NOTE: The NCR Unix System Administrator's Shell does not function properly
+# with the 'pairs' capability defined as below. If you wish to
+# have it included, Un-comment it and recompile (using 'tic').
+#
+ncr260wy350pp|NCR 2900_260 wyse 350,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
+ acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
+ cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
+ cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
+ cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
+ ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
+ hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
+ is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
+ kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
+ kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
+ kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
+ kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
+ kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
+ kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
+ khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
+ mc0=\EP$<10>, mc4=^T, mc5=^R,
+ mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
+ nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
+ rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
+ rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ setb=\s,
+ setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
+ sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
+ smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
+ tsl=\EF,
+ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
+ cols#132,
+ cup=\Ea%i%p1%dR%p2%dC$<30>,
+ is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
+ rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
+ use=ncr260wy350pp,
+# This definition for Wyse 50+ supports several attributes. This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies. The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed.
+# Mapping to ASCII character set ('acsc' capability) can also be
+# restored if needed.
+# (ncr260wy50+pp: originally contained commented-out
+# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
+ncr260wy50+pp|NCR 2900_260 wyse 50+,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, lines#24, nlab#32, xmc#1,
+ acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
+ cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
+ cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
+ cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
+ ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
+ ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
+ invis=\EG1,
+ is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
+ kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
+ kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
+ kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
+ kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
+ kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
+ kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
+ khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
+ mc0=\EP$<10>, mc4=^T, mc5=^R,
+ mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
+ nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
+ rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
+ rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
+ smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
+ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
+ cols#132,
+ cup=\Ea%i%p1%dR%p2%dC$<30>,
+ is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
+ rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
+ use=ncr260wy50+pp,
+ncr260wy60pp|NCR 2900_260 wyse 60,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, lines#24, nlab#32,
+ acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
+ cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
+ cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
+ cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
+ ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
+ ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
+ invis=\EG1,
+ is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
+ kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
+ kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
+ kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
+ kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
+ kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
+ kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
+ mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
+ nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
+ rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
+ rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
+ smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
+ tsl=\EF,
+ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
+ cols#132,
+ cup=\Ea%i%p1%dR%p2%dC$<30>,
+ is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ use=ncr260wy60pp,
+ncr160vppp|NCR 2900_160 viewpoint,
+ use=ncr260vppp,
+ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
+ use=ncr260vpwpp,
+ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
+ use=ncr260vt100an,
+ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
+ use=ncr260vt100pp,
+ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
+ use=ncr260vt100wan,
+ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
+ use=ncr260vt100wpp,
+ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
+ use=ncr260vt200an,
+ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
+ use=ncr260vt200pp,
+ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
+ use=ncr260vt200wan,
+ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
+ use=ncr260vt200wpp,
+ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
+ use=ncr260vt300an,
+ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
+ use=ncr260vt300pp,
+ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
+ use=ncr260vt300wan,
+ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
+ use=ncr260vt300wpp,
+ncr160wy50+pp|NCR 2900_160 wyse 50+,
+ use=ncr260wy50+pp,
+ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
+ use=ncr260wy50+wpp,
+ncr160wy60pp|NCR 2900_160 wyse 60,
+ use=ncr260wy60pp,
+ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
+ use=ncr260wy60wpp,
+ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
+ am, hs, mc5i, mir, msgr, xon,
+ cols#80, it#8, lines#24, nlab#32,
+ acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
+ bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
+ clear=\E[2J\E[1;1H$<300>, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
+ cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
+ cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
+ cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
+ dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
+ ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
+ enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
+ ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
+ ind=\ED,
+ is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
+ kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
+ rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
+ rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
+ rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
+ sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
+ smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
+ tsl=\E[>+1$<70>,
+ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
+ cols#132,
+ is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
+ rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
+ use=ncrvt100an,
+#
+# Vendor-supplied NCR termcaps end here
+
+# NCR7900 DIP switches:
+#
+# Switch A:
+# 1-4 - Baud Rate
+# 5 - Parity (Odd/Even)
+# 6 - Don't Send or Do Send Spaces
+# 7 - Parity Enable
+# 8 - Stop Bits (One/Two)
+#
+# Switch B:
+# 1 - Upper/Lower Shift
+# 2 - Typewriter Shift
+# 3 - Half Duplex / Full Duplex
+# 4 - Light/Dark Background
+# 5-6 - Carriage Return Without / With Line Feed
+# 7 - Extended Mode
+# 8 - Suppress Keyboard Display
+#
+# Switch C:
+# 1 - End of line entry disabled/enabled
+# 2 - Conversational mode / (Local?) Mode
+# 3 - Control characters displayed / not displayed
+# 4 - (2-wire?) / 4-wire communications
+# 5 - RTS on and off for each character
+# 6 - (50Hz?) / 60 Hz
+# 7 - Exit after level zero diagnostics
+# 8 - RS-232 interface
+#
+# Switch D:
+# 1 - Reverse Channel (yes / no)
+# 2 - Manual answer (no / yes)
+# 3-4 - Cursor appearance
+# 5 - Communication Rate
+# 6 - Enable / Disable EXT turnoff
+# 7 - Enable / Disable CR turnoff
+# 8 - Enable / Disable backspace
+#
+# Since each attribute parameter is 0 or 1, we shift each attribute (standout,
+# reverse, blink, dim, and underline) the appropriate number of bits (by
+# multiplying the 0 or 1 by a correct factor to shift) so the bias character,
+# '@' is (effectively) "or"ed with each attribute to generate the proper third
+# character in the <ESC>0 sequence. The <sgr> string implements the following
+# equation:
+#
+# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
+# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
+#
+# Where: P1 <==> Standout attribute parameter
+# P2 <==> Underline attribute parameter
+# P3 <==> Reverse attribute parameter
+# P4 <==> Blink attribute parameter
+# P5 <==> Dim attribute parameter
+# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
+ncr7900i|ncr7900|ncr 7900 model 1,
+ am, bw, ul,
+ cols#80, lines#24, xmc#1,
+ bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
+ cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
+ is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
+ kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
+ rmul=\E0@,
+ sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
+ sgr0=\E0@, smso=\E0Q, smul=\E0`,
+ncr7900iv|ncr 7900 model 4,
+ am, bw, eslok, hs,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
+ cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
+ fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
+ kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
+ khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
+ tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
+# Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
+# The user can enter a CTRL-B to get out of this locked state.
+# In <hpa>, we want to output the character given by the formula:
+# ((col / 10) * 16) + (col % 10) where "col" is "p1"
+ncr7901|ncr 7901 model,
+ am, bw, ul,
+ cols#80, lines#24,
+ bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
+ cub1=^H, cud1=^J, cuf1=^F,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
+ ed=\Ek, el=\EK,
+ hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
+ is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
+ khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
+ sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
+ sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
+ vpa=\013%p1%{64}%+%c,
+
+# Newbury Data Recording Limited (Newbury Data)
+#
+# Have been manufacturing and reselling various peripherals for a long time
+# They don't make terminals anymore, but are still in business (in 2007).
+# Their e-mail address is at ndsales@newburydata.co.uk
+# and their post address is:
+#
+# Newbury Data Recording Ltd,
+# Premier Park, Road One,
+# Winsford, Cheshire, CW7 3PT
+#
+# Their technical support is still good, they sent me for free a printed copy
+# of the 9500 user manual and I got it just 1 week after I first contacted them
+# (in 2005)!
+
+# NDR 9500
+# Manufactured in the early/mid eighties, behaves almost the same as a
+# Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
+# keep the same keyboard layout), add an optional 25-line mode, replace the DIP
+# switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
+# 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
+# recognized: if you type in "ESC !", the next (third) character is not
+# echoed, showing that the terminal was actually waiting for a parameter!
+ndr9500|nd9500|Newbury Data 9500,
+ am, bw, hs, mc5i, mir, msgr, ul, xon,
+ cols#80, lines#24, wsl#79,
+ acsc=qKnImAjDwNuLtMvOlBkCxJ, bel=^G, cbt=\EI, civis=\E.0,
+ clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
+ flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
+ ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
+ kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
+ kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
+ ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
+ kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
+ kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
+ pfloc=\E|%{48}%p1%+%c2%p2\031,
+ pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
+ rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
+ sgr=\E%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
+ sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
+ tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
+
+ndr9500-nl|NDR 9500 with no status line,
+ hs@,
+ wsl@,
+ dsl@, fsl@, tsl@, use=ndr9500,
+
+ndr9500-25|NDR 9500 with 25th line enabled,
+ lines#25, use=ndr9500,
+
+ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
+ lines#25, use=ndr9500-nl,
+
+ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
+ msgr@,
+ xmc#1,
+ blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
+ sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
+ sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
+
+ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
+ lines#25, use=ndr9500-mc,
+
+ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
+ hs@,
+ wsl@,
+ dsl@, fsl@, tsl@, use=ndr9500-mc,
+
+ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
+ lines#25, use=ndr9500-mc-nl,
+
+#### Perkin-Elmer (Owl)
+#
+# These are official terminfo entries from within Perkin-Elmer.
+#
+
+bantam|pe550|pe6100|perkin elmer 550,
+ OTbs,
+ cols#80, lines#24,
+ bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+ el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
+fox|pe1100|perkin elmer 1100,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
+ cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+ ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
+ home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
+owl|pe1200|perkin elmer 1200,
+ OTbs, am, in,
+ cols#80, lines#24,
+ bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
+ cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+ dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
+ el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
+ hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
+ kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
+ kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
+ rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
+pe1251|pe6300|pe6312|perkin elmer 1251,
+ am,
+ cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
+ bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+ ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
+ kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
+ kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
+# (pe7000m: this had
+# rmul=\E!\0, smul=\E!\040,
+# which is probably wrong, it collides with kf0
+pe7000m|perkin elmer 7000 series monochrome monitor,
+ am,
+ cols#80, lines#24,
+ bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
+ cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+ ed=\EJ, el=\EI, home=\EH, ind=^J,
+ is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
+ kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
+ kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
+ kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
+ ll=\ES7\s, ri=\ER,
+pe7000c|perkin elmer 7000 series colour monitor,
+ is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
+ rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
+
+#### Sperry Univac
+#
+# Sperry Univac has merged with Burroughs to form Unisys.
+#
+
+# This entry is for the Sperry UTS30 terminal running the TTY
+# utility under control of CP/M Plus 1R1. The functionality
+# provided is comparable to the DEC vt100.
+# (uts30: I added <rmam>/<smam> based on the init string -- esr)
+uts30|sperry uts30 with cp/m@1R1,
+ am, bw, hs,
+ cols#80, lines#24, wsl#40,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
+ cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
+ cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
+ dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
+ ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
+ ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
+ rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
+ rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
+ rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
+ smul=\E[4m, tsl=\E], uc=\EPB,
+
+#### Tandem
+#
+# Tandem builds these things for use with its line of fault-tolerant
+# transaction-processing computers. They aren't generally available
+# on the merchant market, and so are fairly uncommon.
+#
+
+tandem6510|adm3a repackaged by Tandem,
+ use=adm3a,
+
+# A funny series of terminal that TANDEM uses. The actual model numbers
+# have a fourth digit after 653 that designates minor variants. These are
+# natively block-mode and rather ugly, but they have a character mode which
+# this doubtless(?) exploits. There is a 6520 that is slightly dumber.
+# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
+# removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
+tandem653|t653x|Tandem 653x multipage terminal,
+ OTbs, am, da, db, hs,
+ cols#80, lines#24, wsl#64, xmc#1,
+ clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
+ ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
+ rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
+
+#### Tandy/Radio Shack
+#
+# Tandy has a line of VDTs distinct from its microcomputers.
+#
+
+dmterm|deskmate terminal,
+ am, bw,
+ cols#80, lines#24,
+ bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
+ cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
+ ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
+ kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
+ khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
+ lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
+ use=adm+sgr,
+dt100|dt-100|Tandy DT-100 terminal,
+ xon,
+ cols#80, lines#24, xmc#1,
+ acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
+ il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
+ kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
+ kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
+ knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
+ lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
+dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
+ cols#132, use=dt100,
+dt110|Tandy DT-110 emulating ansi,
+ xon,
+ cols#80, lines#24,
+ acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
+ cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
+ dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
+ ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
+ kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
+ kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
+ khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
+ lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
+ lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+ smacs=^N, smso=\E[7m, smul=\E[4m,
+pt210|TRS-80 PT-210 printing terminal,
+ hc, os,
+ cols#80,
+ bel=^G, cr=^M, cud1=^J, ind=^J,
+
+#### Tektronix (tek)
+#
+# Tektronix tubes are graphics terminals. Most of them use modified
+# oscilloscope technology incorporating a long-persistence green phosphor,
+# and support vector graphics on a main screen with an attached "dialogue
+# area" for interactive text.
+#
+
+tek|tek4012|tektronix 4012,
+ OTbs, os,
+ cols#75, lines#35,
+ bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
+ ff=\014$<1000>, is2=\E^O,
+# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+tek4013|tektronix 4013,
+ acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
+tek4014|tektronix 4014,
+ cols#81, lines#38,
+ is2=\E\017\E9, use=tek4012,
+# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+tek4015|tektronix 4015,
+ acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
+tek4014-sm|tektronix 4014 in small font,
+ cols#121, lines#58,
+ is2=\E\017\E\:, use=tek4014,
+# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+tek4015-sm|tektronix 4015 in small font,
+ acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
+# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
+#
+# You need to have "stty nl2" in effect. Some versions of tset(1) know
+# how to set it for you.
+#
+# It's got the Magic Cookie problem around stand-out mode. If you can't
+# live with Magic Cookie, remove the :so: and :se: fields and do without
+# reverse video. If you like reverse video stand-out mode but don't want
+# it to flash, change the letter 'H' to 'P' in the :so: field.
+tek4023|tektronix 4023,
+ OTbs, am,
+ OTdN#4, cols#80, lines#24, vt#4, xmc#1,
+ OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
+ cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
+ rmso=^_@, smso=^_P,
+# It is recommended that you run the 4025 at 4800 baud or less;
+# various bugs in the terminal appear at 9600. It wedges at the
+# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
+# on keyboard don't work. You have to hit BREAK twice to get
+# one break at any speed - this is a documented feature.
+# Can't use cursor motion because it's memory relative, and
+# because it only works in the workspace, not the monitor.
+# Same for home. Likewise, standout only works in the workspace.
+#
+# <el> was commented out since vi and rogue seem to work better
+# simulating it with lots of spaces!
+#
+# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
+# and didn't seem necessary.
+#
+tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
+ OTbs, am, da, db,
+ cols#80, it#8, lines#34, lm#0,
+ bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
+ cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
+ cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
+ cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
+ dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
+ ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
+ il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
+ ind=^F^J,
+ is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
+ rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
+ smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
+tek4025-17|tek 4025 17 line window,
+ lines#17, use=tek4025,
+tek4025-17-ws|tek 4025 17 line window in workspace,
+ is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
+ rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
+ smso=\037att e\r, use=tek4025-17,
+tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
+ is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
+ rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
+# Tektronix 4025a
+# From: Doug Gwyn <gwyn@brl-smoke.ARPA>
+# The following status modes are assumed for normal operation (replace the
+# initial "!" by whatever the current command character is):
+# !COM 29 # NOTE: changes command character to GS (^])
+# ^]DUP
+# ^]ECH R
+# ^]EOL
+# ^]RSS T
+# ^]SNO N
+# ^]STO 9 17 25 33 41 49 57 65 73
+# Other modes may be set according to communication requirements.
+# If the command character is inadvertently changed, termcap can't restore it.
+# Insert-character cannot be made to work on both top and bottom rows.
+# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
+# There also seems to be a problem with vertical motion, perhaps involving
+# delete/insert-line, following a typed carriage return. This terminal sucks.
+# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
+# work any more. -- esr)
+tek4025a|Tektronix 4025A,
+ OTbs, OTpt, am, bw, da, db, xon,
+ cols#80, it#8, lines#34,
+ bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
+ cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
+ cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
+ cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
+ dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
+ el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
+ il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
+ rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
+ tbc=\035sto;,
+# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
+# Here's the command file that I use to get rogue to work on the 4025.
+# It should work with any program using the old curses (e.g. it better
+# not try to scroll, or cursor addressing won't work. Also, you can't
+# see the cursor.)
+# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
+tek4025-cr|tek 4025 for curses and rogue,
+ OTbs, am,
+ cols#80, it#8, lines#33,
+ clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
+ cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
+ is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
+ rmcup=\037wor 0, smcup=\037wor 33h,
+# next two lines commented out since curses only allows 128 chars, sigh.
+# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
+# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
+tek4025ex|4025ex|4027ex|tek 4025 w/!,
+ is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
+ rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
+tek4105|tektronix 4105,
+ OTbs, am, mir, msgr, ul, xenl, xt,
+ cols#79, it#8, lines#29,
+ acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
+ clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
+ dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
+ is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
+ kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
+ rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
+ rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
+ smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
+ smul=\E[=5;<2m, tbc=\E[1g,
+
+# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
+tek4105-30|4015 emulating 30 line vt100,
+ am, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#30, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
+ rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ use=vt100+fnkeys,
+
+# Tektronix 4105 from BRL
+# The following setup modes are assumed for normal operation:
+# CODE ansi CRLF no DABUFFER 141
+# DAENABLE yes DALINES 30 DAMODE replace
+# DAVISIBILITY yes ECHO no EDITMARGINS 1 30
+# FLAGGING input INSERTREPLACE replace LFCR no
+# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
+# SELECTCHARSET G1 0 TABS -2
+# Other setup modes may be set for operator convenience or communication
+# requirements; I recommend
+# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
+# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
+# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
+# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
+# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
+# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
+# XMTDELAY 0
+# and factory color maps. After setting these modes, save them with NVSAVE. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# "IC" cannot be used in combination with "im" & "ei".
+# "tek4105a" is just a guess:
+tek4105a|Tektronix 4105,
+ OTbs, OTpt, msgr, xon,
+ OTkn#8, cols#80, it#8, lines#30, vt#3,
+ acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
+ cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
+ kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
+ lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
+ rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
+ sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+
+#
+# Tektronix 4106/4107/4109 from BRL
+# The following setup modes are assumed for normal operation:
+# CODE ansi COLUMNMODE 80 CRLF no
+# DABUFFER 141 DAENABLE yes DALINES 32
+# DAMODE replace DAVISIBILITY yes ECHO no
+# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
+# LFCR no LOCKKEYBOARD no ORIGINMODE relative
+# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
+# TABS -2
+# Other setup modes may be set for operator convenience or communication
+# requirements; I recommend
+# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
+# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
+# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
+# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
+# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
+# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
+# XMTDELAY 0
+# and factory color maps. After setting these modes, save them with NVSAVE. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# "IC" cannot be used in combination with "im" & "ei".
+tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
+ msgr, xon,
+ cols#80, it#8, lines#32, vt#3,
+ acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
+ cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
+ kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
+ lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
+ rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
+ sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
+
+tek4107|tek4109|tektronix terminals 4107 4109,
+ OTbs, am, mir, msgr, ul, xenl, xt,
+ cols#79, it#8, lines#29,
+ bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
+ bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
+ cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
+ dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
+ kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
+ rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
+ sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
+ sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
+ smul=\E%!1\E[4m$<2>\E%!0,
+# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
+# see the note attached to tek4207.
+tek4207-s|Tektronix 4207 with sysline but no memory,
+ eslok, hs,
+ dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
+ is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
+ is2=\E7\E[?6l\E[2K\E[?6h\E8,
+ tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
+
+# The 4110 series may be a wonderful graphics series, but they make the 4025
+# look good for screen editing. In the dialog area, you can't move the cursor
+# off the bottom line. Out of the dialog area, ^K moves it up, but there
+# is no way to scroll.
+#
+# Note that there is a floppy for free from Tek that makes the
+# 4112 emulate the vt52 (use the vt52 termcap). There is also
+# an expected enhancement that will use ANSI standard sequences.
+#
+# 4112 in non-dialog area pretending to scroll. It really wraps
+# but vi is said to work (more or less) in this mode.
+#
+# 'vi' works reasonably well with this entry.
+#
+otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
+ am,
+ cols#80, lines#34,
+ bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
+ rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
+# The 4112 with the ANSI compatibility enhancement
+tek4112|tek4114|tektronix 4110 series,
+ OTbs, am, db,
+ cols#80, lines#34,
+ cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
+ ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
+ ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
+ rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+tek4112-nd|4112 not in dialog area,
+ OTns,
+ cuu1=^K, use=tek4112,
+tek4112-5|4112 in 5 line dialog area,
+ lines#5, use=tek4112,
+# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
+# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
+# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
+# previously \0410 and \0411 sequences...I don't *think* they were supposed
+# to be 4-digit octal -- esr)
+tek4113|tektronix 4113 color graphics with 5 line dialog area,
+ OTbs, am, da, eo,
+ cols#80, lines#5,
+ clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
+ flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
+ is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
+tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
+ lines#34,
+ is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
+# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
+# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
+# :vb: needs enough delay to let you see the background color being toggled.
+tek4113-nd|tektronix 4113 color graphics with no dialog area,
+ OTbs, am, eo,
+ cols#80, it#8, lines#34,
+ clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
+ cvvis=\ELZ\EKA0,
+ flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
+ home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
+ ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
+# This entry is from Tek. Inc. (Brian Biehl)
+# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
+otek4115|Tektronix 4115,
+ OTbs, am, da, db, eo,
+ cols#80, it#8, lines#34,
+ cbt=\E[Z, clear=\E[H\E[2J,
+ cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
+ el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
+ il1=\E[L,
+ is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
+ kbs=^H, ri=\EM, rmam=\E[?7l,
+ rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
+ rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
+ smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
+ smul=\E[4m,
+tek4115|newer tektronix 4115 entry with more ANSI capabilities,
+ am, xon,
+ cols#80, lines#34,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
+ rmso=\E[m, rmul=\E[m,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
+ sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
+ vpa=\E[%p1%{1}%+%dd,
+# The tek4125 emulates a vt100 incorrectly - the scrolling region
+# command is ignored. The following entry replaces <csr> with the needed
+# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
+# chokes on; and adds a lot of initialization for the tek dialog area.
+# Note that this entry uses all 34 lines and sets the cursor color to green.
+# Steve Jacobson 8/85
+# (tek4125: there were two "\!"s in the is that I replaced with "\E!";
+# commented out, <smir>=\E1 because there's no <rmir> -- esr)
+tek4125|tektronix 4125,
+ lines#34,
+ csr@, dl1=\E[1M, il1=\E[1L,
+ is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ rc@, sc@, smkx=\E=, use=vt100,
+
+# From: <jcoker@ucbic>
+# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
+# supplied another, less capable 4107 entry. So we'll use that for 4107 and
+# note that if jcoker wasn't confused you may be able to use this one.
+# I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
+tek4207|Tektronix 4207 graphics terminal with memory,
+ am, bw, mir, msgr, ul, xenl,
+ cols#80, it#8, lines#32,
+ blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
+ cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
+ el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
+ il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
+ is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
+ kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
+ rev=\E[7m, ri=\E[T,
+ rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
+ smul=\E[4m, tbc=\E[1g,
+
+# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
+# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
+# Tab had been given as \E2I,that must be the tab-set capability -- esr)
+tek4404|tektronix 4404,
+ OTbs,
+ cols#80, it#8, lines#32,
+ blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
+ rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
+ rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
+ smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
+ smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
+# Some unknown person wrote:
+# I added the is string - straight Unix has ESC ; in the login
+# string which sets a ct8500 into monitor mode (aka 4025 snoopy
+# mode). The is string here cleans up a few things (but not
+# everything).
+ct8500|tektronix ct8500,
+ am, bw, da, db,
+ cols#80, lines#25,
+ bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
+ cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
+ dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
+ il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
+ rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
+
+# Tektronix 4205 terminal.
+#
+# am is not defined because the wrap around occurs not when the char.
+# is placed in the 80'th column, but when we are attempting to type
+# the 81'st character on the line. (esr: hmm, this is like the vt100
+# version of xenl, perhaps am + xenl would work!)
+#
+# Bold, dim, and standout are simulated by colors and thus not allowed
+# with colors. The tektronix color table is mapped into the RGB color
+# table by setf/setb. All colors are reset to factory specifications by oc.
+# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
+# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
+# interval then maps into pre-defined value.
+tek4205|tektronix 4205,
+ ccc, mir, msgr,
+ colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
+ clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
+ ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
+ initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
+ invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
+ kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
+ kf7=\ES,
+ oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
+ op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
+ rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
+ setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
+ setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
+ sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
+ smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
+ smul=\E[4m, tbc=\E[1g,
+
+#### Teletype (tty)
+#
+# These are the hardcopy Teletypes from before AT&T bought the company,
+# clattering electromechanical dinosaurs in Bakelite cases that printed on
+# pulpy yellow roll paper. If you remember these you go back a ways.
+# Teletype-branded VDTs are listed in the AT&T section.
+#
+# The earliest UNIXes were designed to use these clunkers; nroff and a few
+# other programs still default to emitting codes for the Model 37.
+#
+
+tty33|tty35|model 33 or 35 teletype,
+ hc, os, xon,
+ cols#72,
+ bel=^G, cr=^M, cud1=^J, ind=^J,
+tty37|model 37 teletype,
+ OTbs, hc, os, xon,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
+ ind=^J,
+
+# There are known to be at least three flavors of the tty40, all seem more
+# like IBM half duplex forms fillers than ASCII terminals. They have lots of
+# awful braindamage, such as printing a visible newline indicator after each
+# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
+# braindamaged but has hope and is described here. The 40-4 is a 3270
+# lookalike and beyond hope. The terminal has visible bell but I don't know
+# it - it's null here to prevent it from showing the BL character.
+# There is an \EG in <nl> because of a bug in old vi (if stty says you have
+# a "newline" style terminal (-crmode) vi figures all it needs is nl
+# to get crlf, even if <cr> is not ^M.)
+# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
+tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
+ OTbs, xon,
+ cols#80, lines#24,
+ clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
+ cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
+ ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
+ ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
+ kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
+ rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
+tty43|model 43 teletype,
+ OTbs, am, hc, os, xon,
+ cols#132,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
+
+#### Tymshare
+#
+
+# You can add <is2=\E<> to put this 40-column mode, though I can't
+# for the life of me think why anyone would want to.
+scanset|sc410|sc415|Tymshare Scan Set,
+ am, bw, msgr,
+ cols#80, lines#24,
+ acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
+ cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
+ mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
+
+#### Volker-Craig (vc)
+#
+# If you saw a Byte Magazine cover with a terminal on it during the early
+# 1980s, it was probably one of these. Carl Helmers liked them because
+# they could crank 19.2 and were cheap (that is, he liked them until he tried
+# to program one...)
+#
+
+# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
+# every other linefeed.
+vc303|vc103|vc203|volker-craig 303,
+ OTbs, OTns, am,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
+ cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
+ kcuu1=^N, ll=\017$<1>W,
+vc303a|vc403a|volker-craig 303a,
+ clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
+ home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
+# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
+vc404|volker-craig 404,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
+ cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
+ ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
+ kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
+vc404-s|volker-craig 404 w/standout mode,
+ cud1=^J, rmso=^O, smso=^N, use=vc404,
+# From: <wolfgang@cs.sfu.ca>
+# (vc414: merged in cup/dl1/home from an old vc414h-noxon)
+vc414|vc414h|Volker-Craig 414H in sane escape mode.,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
+ cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
+ dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
+ ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
+ kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
+ kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
+ lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
+ rmso=\E^_, smso=\E^Y,
+vc415|volker-craig 415,
+ clear=^L, use=vc404,
+
+######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
+#
+
+#### IBM PC and clones
+#
+
+# The pcplot IBM-PC terminal emulation program is really messed up. It is
+# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
+# doesn't support scrolling regions, ignores add line commands, and ignores
+# delete line commands. Consequently, the resulting behavior looks like a
+# crude adm3a-type terminal.
+# Steve Jacobson 8/85
+pcplot|pc-plot terminal emulation program,
+ xenl@,
+ csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
+# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
+# I've found that my KayPro II, running MDM730, continues to emulate an
+# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
+# system the following termcap entry works well:
+# I have noticed a couple of minor glitches, but nothing I can't work
+# around. (I added two capabilities from the BRL entry -- esr)
+kaypro|kaypro2|kaypro II,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
+ el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
+
+# From IBM, Thu May 5 19:35:27 1983
+# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
+ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
+ cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
+
+ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
+ OTbs, am, bw, eo, hs, km, msgr, ul,
+ cols#80, it#8, lines#24,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
+ cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
+ indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
+ kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
+ kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
+ kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
+ ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
+ rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+ sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+
+#### Apple II
+#
+# Apple II firmware console first, then various 80-column cards and
+# terminal emulators. For two cents I'd toss all these in the UFO file
+# along with the 40-column apple entries.
+#
+
+# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
+# 'it#8' tells UNIX that you have tabs every 8 columns. This is a
+# function of TIC, not the firmware.
+# The clear key on a IIgs will do something like clear-screen,
+# depending on what you're in.
+appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
+ OTbs, am, bw, eo, msgr,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
+ kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
+ smso=^O,
+# Apple //e with 80-column card, entry from BRL
+# The modem interface is permitted to discard LF (maybe DC1), otherwise
+# passing characters to the 80-column firmware via COUT (PR#3 assumed).
+# Auto-wrap does not work right due to newline scrolling delay, which also
+# requires that you set "stty cr2".
+# Note: Cursor addressing is only available via the Pascal V1.1 entry,
+# not via the BASIC PR#3 hook. All this nonsense can be avoided only by
+# using a terminal emulation program instead of the built-in firmware.
+apple2e|Apple //e,
+ bw, msgr,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
+ ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
+ is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
+ nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
+ smso=^O,
+# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
+# 4.20, with incoming and outgoing terminals both on 0, emulation On.
+apple2e-p|Apple //e via Pascal,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
+ kcud1=^J, use=apple2e,
+# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
+# Enable DC3/DC1 flow control with "stty ixon -ixany".
+apple-ae|ASCII Express,
+ OTbs, am, bw, msgr, nxon, xon,
+ cols#80, it#8, lines#24,
+ bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
+ kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
+ smso=^O,
+appleII|apple ii plus,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
+ ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
+ is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
+ smso=^O,
+# Originally by Gary Ford 21NOV83
+# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
+apple-80|apple II with smarterm 80 col,
+ OTbs, am, bw,
+ cols#80, lines#24,
+ cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
+ cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
+ ed=\013$<10*/>, el=\035$<10/>, home=^Y,
+apple-soroc|apple emulating soroc 120,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
+ home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
+# From Peter Harrison, Computer Graphics Lab, San Francisco
+# ucbvax!ucsfmis!harrison .....uucp
+# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
+# "These two work. If you don't have the inverse video chip for the
+# Apple with videx then remove the :so: and :se: fields."
+# (apple-videx: this used to be called DaleApple -- esr)
+apple-videx|Apple with videx videoterm 80 column board with inverse video,
+ OTbs, am, xenl,
+ cols#80, it#8, lines#24,
+ clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
+ rmso=^Z2, sgr0=^Z2, smso=^Z3,
+# My system [for reference] : Apple ][+, 64K, Ultraterm display card,
+# Apple Cat ][ 212 modem, + more all
+# controlled by ASCII Express: Pro.
+# From Dave Shaver <isucs1!shaver>
+apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
+ OTbs, am, eo, xt,
+ cols#80, lines#24,
+ acsc=, clear=^L, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ flash=^W35^W06, home=^Y,
+ is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
+ rmso=^N, smso=^O,
+apple-uterm|Ultraterm for Apple micros,
+ OTbs, am, eo, xt,
+ cols#80, lines#24,
+ acsc=, clear=^L, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
+# from trwrba!bwong (Bradley W. Wong):
+#
+# This entry assumes that you are using an apple with the UCSD Pascal
+# language card. SYSTEM.MISCINFO is assumed to be the same as that
+# supplied with the standard apple except that screenwidth should be set
+# using SETUP to 80 columns. Note that the right arrow in not mapped in
+# this termcap entry. This is because that key, on the Apple, transmits
+# a ^U and would thus preempt the more useful "up" function of vi.
+#
+# HMH 2/23/81
+apple80p|80-column apple with Pascal card,
+ am, bw,
+ cols#80, lines#24,
+ clear=^Y^L, cuf1=^\\:,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, kcub1=^H,
+#
+# Apple II+ equipped with Videx 80 column card
+#
+# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
+# manually converted by D A Gwyn
+#
+# DO NOT use any terminal emulation with this data base, it works directly
+# with the Videx card. This has been tested with vi 1200 baud and works fine.
+#
+# This works great for vi, except I've noticed in pre-R2, ^U will scroll back
+# 1 screen, while in R2 ^U doesn't.
+# For inverse alternate character set add:
+# <smacs>=^O:<rmacs>=^N:
+# (apple-v: added it#8 -- esr)
+apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
+ am, xenl,
+ cols#80, it#8, lines#24,
+ bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
+ cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
+ cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
+ ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
+ khome=^Y, rmso=^Z2, smso=^Z3,
+apple-videx3|vapple|Apple II with 80 col card,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
+ kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
+#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
+aepro|Apple II+ running ASCII Express Pro--vt52,
+ OTbs,
+ cols#80, lines#24,
+ clear=\014$<300/>, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, home=\EH,
+# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
+apple-vm80|ap-vm80|apple with viewmax-80,
+ OTbs,
+ cols#80, lines#24,
+ clear=\014$<300/>, cuf1=^\\:,
+ cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
+ ed=\013$<300/>, el=^], home=\031$<200/>,
+
+#### Apple Lisa & Macintosh
+#
+
+# (lisa: changed <cvvis> to <cnorm> -- esr)
+lisa|apple lisa console display (black on white),
+ OTbs, am, eo, msgr,
+ cols#88, it#8, lines#32,
+ acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
+ cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
+ is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
+liswb|apple lisa console display (white on black),
+ is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
+ smso=\E[m, smul=\E[4m, use=lisa,
+
+# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
+# <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
+#
+# These entries assume that the 'Auto Wraparound' is enabled.
+# Xon-Xoff flow control should also be enabled.
+#
+# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
+# settings are in non-volatile memory and don't need to be reset upon login.
+# Also setting the number of columns glitches the screen annoyingly.
+# You can type "reset" to get them set.
+#
+lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
+ OTbs, OTpt, am, xenl, xon,
+ OTkn#4, cols#80, it#8, lines#24, vt#3,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
+ el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
+ kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
+ rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
+ sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g,
+# Lisaterm in 132 column ("wide") mode.
+lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
+ cols#132,
+ kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
+# Although MacTerminal has insert/delete line, it is commented out here
+# since it is much faster and cleaner to use the "lock scrolling region"
+# method of inserting and deleting lines due to the MacTerminal implementation.
+# Also, the "Insert/delete ch" strings have an extra character appended to them
+# due to a bug in MacTerminal V1.1. Blink is disabled since it is not
+# supported by MacTerminal.
+mac|macintosh|Macintosh with MacTerminal,
+ xenl,
+ OTdN#30,
+ blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
+# Lisaterm in 132 column ("wide") mode.
+mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
+ cols#132, use=mac,
+
+# The AppKit Terminal.app descriptions all have names beginning with
+# "nsterm". Note that the statusline (-s) versions use the window
+# titlebar as a phony status line, and may produce warnings during
+# compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore
+# these warnings, or even ignore these entries entirely. Apps which
+# need to position the cursor or do other fancy stuff inside the status
+# line won't work with these entries. They're primarily useful for
+# programs like Pine which provide simple notifications in the status
+# line. Please note that non-ASCII characters don't work right in the
+# status line, since Terminal.app incorrectly interprets their Unicode
+# codepoints as MacRoman codepoints.
+#
+# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
+# "nsterm" to comply with the name length and case conventions and
+# limitations of various software packages [notably Solaris terminfo
+# and UNIX.] A single Apple_Terminal alias is retained for
+# backwards-compatbility.
+#
+# * Added function key support (F1-F4). These only work in Terminal.app
+# version 51, hopefully the capabilities won't cause problems for people
+# using version 41.
+#
+# * Added "full color" (-c) entries which support the 16-color mode in
+# version 51.
+#
+# * By default, version 51 uses UTF-8 encoding with broken altcharset
+# support, so "ASCII" (-7) entries without altcharset support were
+# added.
+
+# nsterm - AppKit Terminal.app
+#
+# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
+# Terminal.app. It is a partial VT100 emulation with some xterm-like
+# extensions. This terminfo was written to describe versions 41
+# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
+# version 10.1) of Terminal.app.
+#
+# Terminal.app runs under the Mac OS X Quartz windowing system (and
+# other AppKit-supported windowing systems.) On the Mac OS X machine I
+# use, the executable for Terminal.app is:
+# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
+#
+# If you're looking for a description of the full-screen system
+# console which runs under Apple's Darwin operating system on PowerPC
+# platforms, see the "xnuppc" entry instead.
+#
+# There were no function keys in version 41. In version 51, there are
+# four working function keys (F1, F2, F3 and F4.) The function keys
+# are included in all of these entries.
+#
+# It does not support mouse pointer position reporting. Under some
+# circumstances the cursor can be positioned using option-click; this
+# works by comparing the cursor position and the selected position,
+# and simulating enough cursor-key presses to move the cursor to the
+# selected position. This technique fails in all but the simplest
+# applications.
+#
+# It provides partial ANSI color support (background colors interacted
+# badly with bold in version 41, though, as reflected in :ncv:.) The
+# monochrome (-m) entries are useful if you've disabled color support
+# or use a monochrome monitor. The full color (-c) entries are useful
+# in version 51, which doesn't exhibit the background color bug. They
+# also enable an xterm-compatible 16-color mode.
+#
+# The configurable titlebar is set using xterm-compatible sequences;
+# it is used as a status bar in the statusline (-s) entries. Its width
+# depends on font sizes and window sizes, but 50 characters seems to
+# be the default for an 80x24 window.
+#
+# The MacRoman character encoding is used for some of the alternate
+# characters in the "MacRoman" entries; the "ASCII" (-7) entries
+# disable alternate character set support entirely, and the "VT100"
+# (-acs) entries rely instead on Terminal.app's own buggy VT100
+# graphics emulation, which seems to think the character encoding is
+# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
+# are useful in Terminal.app version 51, which supports UTF-8 and
+# other ASCII-compatible character encodings but does not correctly
+# implement VT100 graphics; once VT100 graphics are correctly
+# implemented in Terminal.app, the "VT100" (-acs) entries should be
+# usable in any ASCII-compatible character encoding [except perhaps
+# in UTF-8, where some experts argue for disallowing alternate
+# characters entirely.]
+#
+# Terminal.app reports "vt100" as the terminal type, but exports
+# several environment variables which may aid detection in a shell
+# profile (i.e. .profile or .login):
+#
+# TERM=vt100
+# TERM_PROGRAM=Apple_Terminal
+# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
+# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
+#
+# For example, the following Bourne shell script would detect the
+# correct terminal type:
+#
+# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
+# then
+# export TERM
+# if [ :"$TERM_PROGRAM_VERSION" = :41 ]
+# then
+# TERM="nsterm"
+# else
+# TERM="nsterm-c-7"
+# fi
+# fi
+#
+# In a C shell derivative, this would be accomplished by:
+#
+# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
+# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
+# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
+# setenv TERM "nsterm"
+# else
+# setenv TERM "nsterm-c-7"
+# endif
+# endif
+# endif
+
+# The '+' entries are building blocks
+nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
+ am, bw, msgr, xenl, xon,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
+ sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
+
+nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ enacs=\E(B\E)0, rmacs=^O,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ smacs=^N, use=nsterm+7,
+
+nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
+ acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377,
+ enacs=\E(B\E)0, rmacs=^O,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ smacs=^N, use=nsterm+7,
+
+nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
+ hs,
+ wsl#50,
+ dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
+
+nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
+ op=\E[0m, use=ibm+16color,
+
+nsterm+c41|AppKit Terminal.app v41 color support,
+ colors#8, ncv#37, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+
+# These are different combinations of the building blocks
+
+# ASCII charset (-7)
+nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
+ use=nsterm+7,
+
+nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
+ use=nsterm+s, use=nsterm+7,
+
+nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
+ use=nsterm+c41, use=nsterm+7,
+
+nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
+ use=nsterm+c, use=nsterm+7,
+
+nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
+ use=nsterm+s, use=nsterm+c41, use=nsterm+7,
+
+nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
+ use=nsterm+s, use=nsterm+c, use=nsterm+7,
+
+# VT100 alternate-charset (-acs)
+nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
+ use=nsterm+acs,
+
+nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
+ use=nsterm+s, use=nsterm+acs,
+
+nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
+ use=nsterm+c41, use=nsterm+acs,
+
+nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
+ use=nsterm+c, use=nsterm+acs,
+
+nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
+ use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
+
+nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
+ use=nsterm+s, use=nsterm+c, use=nsterm+acs,
+
+# MacRoman charset
+nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
+ use=nsterm+mac,
+
+nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
+ use=nsterm+s, use=nsterm+mac,
+
+nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color),
+ use=nsterm+c41, use=nsterm+mac,
+
+nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
+ use=nsterm+c, use=nsterm+mac,
+
+nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
+ use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
+
+nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
+ use=nsterm+s, use=nsterm+c, use=nsterm+mac,
+
+
+# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
+# and D P Schreber comparing to nsterm-c-s-acs.
+#
+# D P Schreber notes that $TERM can be set in Terminal.app, e.g.,
+# defaults write com.apple.Terminal TermCapString nsterm-c-s-acs
+# and that it is not set in Terminal's preferences dialog.
+nsterm-16color|AppKit Terminal.app v100.1.8 with MacOS X 10.3.9,
+ kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ knp=\E[6~, kpp=\E[5~, use=nsterm-c-s-acs,
+
+# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
+#
+# On PowerPC platforms, Apple's Darwin operating system uses a
+# full-screen system console derived from a NetBSD framebuffer
+# console. It is an ANSI-style terminal, and is not really VT-100
+# compatible.
+#
+# Under Mac OS X, this is the system console driver used while in
+# single-user mode [reachable by holding down Command-S during the
+# boot process] and when logged in using console mode [reachable by
+# typing ">console" at the graphical login prompt.]
+#
+# If you're looking for a description of the Terminal.app terminal
+# emulator which runs under the Mac OS X Quartz windowing system (and
+# other AppKit-supported windowing systems,) see the "nsterm"
+# entry instead.
+#
+# NOTE: Under Mac OS X version 10.1, the default login window does not
+# prompt for user name, instead requiring an icon to be selected from
+# a list of known users. Since the special ">console" login is not in
+# this list, you must make one of two changes in the Login Window
+# panel of the Login section of System Prefs to make the special
+# ">console" login accessible. The first option is to enable 'Show
+# "Other User" in list for network users', which will add a special
+# "Other..." icon to the graphical login panel. Selecting "Other..."
+# will present the regular graphical login prompt. The second option
+# is to change the 'Display Login Window as:' setting to 'Name and
+# password entry fields', which replaces the login panel with a
+# graphical login prompt.
+#
+# There are no function keys, at least not in Darwin 1.3.
+#
+# It has no mouse support.
+#
+# It has full ANSI color support, and color combines correctly with
+# all three supported attributes: bold, inverse-video and underline.
+# However, bold colored text is almost unreadable (bolding is
+# accomplished using shifting and or-ing, and looks smeared) so bold
+# has been excluded from the list of color-compatible attributes
+# [using (ncv)]. The monochrome entry (-m) is useful if you use a
+# monochrome monitor.
+#
+# There is one serious bug with this terminal emulation's color
+# support: repositioning the cursor onto a cell with non-matching
+# colors obliterates that cell's contents, replacing it with a blank
+# and displaying a colored cursor in the "current" colors. There is
+# no complete workaround at present [other than using the monochrome
+# (-m) entries,] but removing the (msgr) capability seemed to help.
+#
+# The "standout" chosen was simple reverse-video, although a colorful
+# standout might be more aesthetically pleasing. Similarly, the bold
+# chosen is the terminal's own smeared bold, although a simple
+# color-change might be more readable. The color-bold (-b) entries
+# uses magenta colored text for bolding instead. The fancy color (-f
+# and -f2) entries use color for bold, standout and underlined text
+# (underlined text is still underlined, though.)
+#
+# Apparently the terminal emulator does support a VT-100-style
+# alternate character set, but all the alternate character set
+# positions have been left blank in the font. For this reason, no
+# alternate character set capabilities have been included in this
+# description. The console driver appears to be ASCII-only, so (enacs)
+# has been excluded [although the VT-100 sequence does work.]
+#
+# The default Mac OS X and Darwin installation reports "vt100" as the
+# terminal type, and exports no helpful environment variables. To fix
+# this, change the "console" entry in /etc/ttys from "vt100" to
+# "xnuppc-WxH", where W and H are the character dimensions of your
+# console (see below.)
+#
+# The font used by the terminal emulator is apparently one originally
+# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
+# file includes descriptions for the following geometries:
+#
+# Pixels Characters Entry Name (append -m for monochrome)
+# -------------------------------------------------------------------
+# 640x400 80x25 xnuppc-80x25
+# 640x480 80x30 xnuppc-80x30
+# 720x480 90x30 xnuppc-90x30
+# 800x600 100x37 xnuppc-100x37
+# 896x600 112x37 xnuppc-112x37
+# 1024x640 128x40 xnuppc-128x40
+# 1024x768 128x48 xnuppc-128x48
+# 1152x768 144x48 xnuppc-144x48
+# 1280x1024 160x64 xnuppc-160x64
+# 1600x1024 200x64 xnuppc-200x64
+# 1600x1200 200x75 xnuppc-200x75
+# 2048x1536 256x96 xnuppc-256x96
+#
+# The basic "xnuppc" entry includes no size information, and the
+# emulator includes no reporting capability, so you'll be at the mercy
+# of the TTY device (which reports incorrectly on my hardware.) The
+# color-bold entries do not include size information.
+
+# The '+' entries are building blocks
+xnuppc+basic|Darwin PowerPC Console basic capabilities,
+ am, bce, mir, xenl,
+ it#8,
+ bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
+ rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
+ rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+ sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
+
+xnuppc+c|Darwin PowerPC Console ANSI color support,
+ colors#8, ncv#32, pairs#64,
+ op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+
+xnuppc+b|Darwin PowerPC Console color-bold support,
+ ncv#32,
+ bold=\E[35m,
+ sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+ use=xnuppc+basic,
+
+xnuppc+f|Darwin PowerPC Console fancy color support,
+ ncv#35,
+ sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
+ smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
+
+xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
+ ncv#35,
+ bold=\E[33m,
+ sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
+ smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
+
+# Building blocks for specific screen sizes
+xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
+ cols#80, lines#25,
+
+xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
+ cols#80, lines#30,
+
+xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
+ cols#90, lines#30,
+
+xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
+ cols#100, lines#37,
+
+xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
+ cols#112, lines#37,
+
+xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
+ cols#128, lines#40,
+
+xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
+ cols#128, lines#48,
+
+xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
+ cols#144, lines#48,
+
+xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
+ cols#160, lines#64,
+
+xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
+ cols#200, lines#64,
+
+xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
+ cols#200, lines#75,
+
+xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
+ cols#256, lines#96,
+
+# These are different combinations of the building blocks
+
+xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
+ use=xnuppc+basic,
+
+xnuppc|darwin|Darwin PowerPC Console (color),
+ use=xnuppc+c, use=xnuppc+basic,
+
+xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
+ use=xnuppc+b,
+
+xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
+ use=xnuppc+b, use=xnuppc+c,
+
+xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
+ use=xnuppc+f,
+
+xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
+ use=xnuppc+f, use=xnuppc+c,
+
+xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
+ use=xnuppc+f2,
+
+xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
+ use=xnuppc+f2, use=xnuppc+c,
+
+# Combinations for specific screen sizes
+xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
+ use=xnuppc+80x25, use=xnuppc+basic,
+
+xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
+ use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
+
+xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
+ use=xnuppc+80x30, use=xnuppc+basic,
+
+xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
+ use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
+
+xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
+ use=xnuppc+90x30, use=xnuppc+basic,
+
+xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
+ use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
+
+xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
+ use=xnuppc+100x37, use=xnuppc+basic,
+
+xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
+ use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
+
+xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
+ use=xnuppc+112x37, use=xnuppc+basic,
+
+xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
+ use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
+
+xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
+ use=xnuppc+128x40, use=xnuppc+basic,
+
+xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
+ use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
+
+xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
+ use=xnuppc+128x48, use=xnuppc+basic,
+
+xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
+ use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
+
+xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
+ use=xnuppc+144x48, use=xnuppc+basic,
+
+xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
+ use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
+
+xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
+ use=xnuppc+160x64, use=xnuppc+basic,
+
+xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
+ use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
+
+xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
+ use=xnuppc+200x64, use=xnuppc+basic,
+
+xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
+ use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
+
+xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
+ use=xnuppc+200x75, use=xnuppc+basic,
+
+xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
+ use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
+
+xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
+ use=xnuppc+256x96, use=xnuppc+basic,
+
+xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
+ use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
+
+#### Radio Shack/Tandy
+#
+
+# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
+# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
+# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
+coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
+ clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
+ cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
+ dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
+ kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
+ sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
+# (trs2: removed obsolete ":nl=^_:" -- esr)
+trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
+ OTbs, am, msgr,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
+ el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
+ kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
+# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
+# (This had extension capabilities
+# :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
+# :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
+# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
+trs16|trs-80 model 16 console,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
+ cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
+ dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
+ ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
+ khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
+ lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
+ smacs=\ERG, smso=\ERD,
+
+#### Atari ST
+#
+
+# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
+atari|atari st,
+ OTbs, am,
+ cols#80, it#8, lines#25,
+ clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
+ ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
+# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
+# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
+uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
+ lines#49,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
+ use=vt220,
+# MiNT VT52 emulation. 80 columns, 25 rows.
+# MiNT is Now TOS, the operating system which comes with all Ataris now
+# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
+# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
+# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
+st52|Atari ST with VT52 emulation,
+ am, km,
+ cols#80, lines#25,
+ bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
+ cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
+ ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
+ kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
+ kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
+ kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
+ kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
+ ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
+ smcup=\Ee, smso=\Ep,
+
+#### Commodore Business Machines
+#
+# Formerly located in West Chester, PA; went spectacularly bust in 1994
+# after years of shaky engineering and egregious mismanagement. Made one
+# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
+# C-128, VIC-20). The C-64 is said to have been the most popular machine
+# ever (most units sold); they can still be found gathering dust in closets
+# everywhere.
+#
+
+# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
+# Added a few more entries, converted caret-type control sequence (^x) entries
+# to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
+# Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
+#
+# :as:, :ae: Support for alternate character sets.
+# :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
+# :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
+# This one appears to fix a problem I always had with a line ending
+# at 'width+1' (I think) followed by a blank line in vi. The blank
+# line tended to disappear and reappear depending on how the screen
+# was refreshed. Note that this is probably needed only if you use
+# something like a Dnet Fterm with the window sized to some peculiar
+# dimension larger than 80 columns.
+# :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
+# (amiga: removed obsolete :kn#10:,
+# also added empty <acsc> to suppress a warning --esr)
+amiga|Amiga ANSI,
+ OTbs, am, bw, xenl,
+ cols#80, lines#24,
+ acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
+ civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
+ kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
+ kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
+ ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
+ rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
+
+# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
+# (amiga: added empty <acsc> to suppress a warning.
+# I'm told this entry screws up badly with AS225, the Amiga
+# TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
+amiga-h|Hans Verkuil's Amiga ANSI,
+ OTbs, bw, msgr,
+ cols#80, lines#24,
+ acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
+ civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
+ cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
+ cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
+ cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
+ dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
+ home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
+ indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
+ kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
+ kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
+ kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
+ kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
+ rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
+ rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
+ smso=\2337m, smul=\2334m,
+
+# From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
+#
+# Pavel Fedin added
+# Home Shift+Left
+# End Shift+Right
+# PgUp Shift+Up
+# PgDn Shift+Down
+amiga-8bit|Amiga ANSI using 8-bit controls,
+ acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
+ ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
+ kpp=\233T, ri=\215, rin@, use=amiga-h,
+
+# From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
+# requires use of appropriate preferences settings.
+amiga-vnc|Amiga using VNC console (black on light gray),
+ am, da, db, msgr, ndscr,
+ btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
+ bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
+ clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
+ indn=\E[%p1%dS, invis=\E8m,
+ is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
+ kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
+ kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
+ kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
+ kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
+ rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
+ rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
+ setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
+ setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
+ sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
+ smso=\E[1m, smul=\E[4m,
+
+# MorphOS on Genesi Pegasos
+# By Pavel Fedin <sonic_amiga@rambler.ru>
+morphos,
+ acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
+ ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
+ khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
+ ri=\215, rin@, use=amiga-h,
+
+# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
+# I'm trying to write a termcap for a commodore b-128, and I'm
+# having a little trouble. I've had to map most of my control characters
+# to something that unix will accept (my delete-char is a ctrl-t, etc),
+# and create some functions (like cm), but thats life.
+# The problem is with the arrow keys - right, and up work fine, but
+# left deletes the previous character and down I just can't figure out.
+# Jove knows what I want, but I don't know what it's sending to me (it
+# isn't thats bound to next-line in jove).
+# Anybody got any ideas? Here's my termcap.
+# DAG -- I changed his "^n" entries to "\n"; see if that works.
+#
+commodore|b-128|Commodore B-128 micro,
+ am, bw,
+ OTdN#20, cols#80, lines#24, pb#150,
+ OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
+ cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
+ dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
+ home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
+ kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
+ smir=,
+
+#### North Star
+#
+# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
+northstar|North Star Advantage,
+ OTbs,
+ cols#80, lines#24,
+ clear=\004$<200/>,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
+ el=\016$<200/>, home=\034\032$<200/>,
+
+#### Osborne
+#
+# Thu Jul 7 03:55:16 1983
+#
+# As an aside, be careful; it may sound like an anomaly on the
+# Osborne, but with the 80-column upgrade, it's too easy to
+# enter lines >80 columns!
+#
+# I've already had several comments...
+# The Osborne-1 with the 80-col option is capable of being
+# 52, 80, or 104 characters wide; default to 80 for compatibility
+# with most systems.
+#
+# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
+osborne-w|osborne1-w|osborne I in 104-column mode,
+ msgr, ul, xt,
+ cols#104, lines#24,
+ bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
+ kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
+# Osborne I from ptsfa!rhc (Robert Cohen) via BRL
+osborne|osborne1|osborne I in 80-column mode,
+ OTbs, am, mir, msgr, ul, xhp,
+ OTdB#4, cols#80, lines#24,
+ clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
+ kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
+ rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
+#
+# Osborne Executive definition from BRL
+# Similar to tvi920
+# Added by David Milligan and Tom Smith (SMU)
+osexec|Osborne executive,
+ OTbs, am,
+ OTug#1, cols#80, lines#24, xmc#1,
+ OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
+ is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
+ kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
+ kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
+ kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
+ smul=\El, tbc=\E3,
+
+#### Console types for obsolete UNIX clones
+#
+# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
+# machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
+# were commercial, Minix an educational tool sold in conjunction with a book.
+# Memory-segmentation limits and a strong tendency to look like V7 long after
+# it was obsolete made all three pretty lame. Venix croaked early. Coherent
+# and Minix were ported to 32-bit Intel boxes, only to be run over by a
+# steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
+# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
+# are also, I'm told, Minix ports that ran on Amiga and Atari machines and
+# even as single processes under SunOS and the Macintosh OS.
+#
+
+# This is the entry provided with minix 1.7.4, with bogus :ri: removed.
+minix|minix console (v1.7),
+ am, xenl,
+ cols#80, it#8, lines#25,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
+ kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
+ lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
+ rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
+# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
+minix-old|minix console (v1.5),
+ xon,
+ cols#80, it#8, lines#25,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
+ khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
+ rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
+# The linewrap option can be specified by editing /usr/include/minix/config.h
+# before recompiling the minix 1.5 kernel.
+minix-old-am|minix console with linewrap,
+ am, use=minix-old,
+
+pc-minix|minix console on an Intel box,
+ use=klone+acs, use=minix,
+
+# According to the Coherent 2.3 manual, the PC console is similar
+# to a z19. The differences seem to be (1) 25 lines, (2) no status
+# line, (3) standout is broken, (4) ins/del line is broken, (5)
+# has blinking and bold.
+pc-coherent|pcz19|coherent|IBM PC console running Coherent,
+ am, mir,
+ cols#80, it#8, lines#25,
+ bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
+ ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
+ rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
+
+# According to the Venix 1.1 manual, the PC console is similar
+# to a DEC vt52. Differences seem to be (1) arrow keys send
+# different strings, (2) enhanced standout, (3) added insert/delete line.
+# Note in particular that it doesn't have automatic margins.
+# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
+# not described here because this derives from an old termcap entry.
+pc-venix|venix|IBM PC console running Venix,
+ cols#80, it#8, lines#25,
+ bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
+ ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
+ kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
+
+#### Miscellaneous microcomputer consoles
+#
+# If you know anything more about any of these, please tell me.
+#
+
+# The MAI Basic Four computer was obsolete at the end of the 1980s.
+# It may be used as a terminal by putting it in "line" mode as seen on
+# one of the status lines.
+# Initialization is similar to CIT80. <is2> will set ANSI mode for you.
+# Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
+# wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
+# used \ED instead.
+# From: bf347@lafn.org (David Lawyer), 28 Jun 1997
+mai|basic4|MAI Basic Four in ansi mode,
+ am, da, db, mir, msgr,
+ cols#82, it#8, lines#25,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
+ cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
+ dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
+ if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
+ is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
+ kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
+ rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
+ smir=\E[4h, smso=\E[7m, smul=\E[4m,
+# basis from Peter Harrison, Computer Graphics Lab, San Francisco
+# ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
+#
+# On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
+# The Basis 108 was a Apple II clone, manufactured by the "Basis
+# Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
+# about 1,5 km from where I live, but doesn't build own computers any
+# more). A Basis 108 featured a really heavy (cast aluminium?) case, was
+# equipped with one or two 5.25" disk drives, had a monochrome and colour
+# video output for a TV set or a dedicated monitor and several slots for
+# Apple II cards. Basis 108 were quite popular at german schools before
+# the advent of the IBM PC. They run, for example, the UCSD Pascal
+# development system (which I used even in 1993 to program the steering
+# and data recording for our school's experimental solar panel :), Apple DOS
+# or CP/M.
+# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
+basis|BASIS108 computer with terminal translation table active,
+ clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
+ kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
+ smso=\E(, use=adm3a,
+# luna's BMC terminal emulator
+luna|luna68k|LUNA68K Bitmap console,
+ cols#88, lines#46, use=ansi-mini,
+megatek|pegasus workstation terminal emulator,
+ am, os,
+ cols#83, lines#60,
+# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
+# interface (pre-Macintosh by several years) that went nowhere.
+xerox820|x820|Xerox 820,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
+ home=^^, ind=^J,
+
+#### Videotex and teletext
+#
+
+# \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
+# \E[?3l 80 columns
+# \E[?4l scrolling on
+# \E[12h local echo off
+# \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
+# \E)0 G1 DEC set (line graphics)
+#
+# From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
+m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
+ OTbs, eslok, hs, xenl,
+ cols#80, it#8, lines#24, wsl#72, xmc#0,
+ acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
+ blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
+ cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
+ home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
+ is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
+ is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
+ kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
+ kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
+ kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
+ mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
+ smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
+ u6=\E[%i%d;%dR, u7=\E[6n,
+
+# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
+#
+minitel1|minitel 1,
+ am, bw, eslok, hs, hz, msgr,
+ colors#8, cols#40, lines#24, pairs#8,
+ acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
+ cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
+ cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
+ enacs=^Y, fsl=^J, home=^^, ind=^J,
+ is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
+ rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
+ setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
+ sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
+ sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
+# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
+minitel1b|minitel 1-bistandard (in 40cols mode),
+ mir,
+ cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
+ cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
+ is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
+ kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
+ smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
+# <rmkx> posait des problemes (logout en sortant de vi).
+minitel1b-80|minitel 1-bistandard (standard teleinformatique),
+ am@, bw@, hz@,
+ colors@, cols#80, it#8, pairs@,
+ blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
+ clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
+ ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
+ kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
+ kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
+ ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
+ sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
+
+######## OBSOLETE VDT TYPES
+#
+# These terminals are *long* dead -- these entries are retained for
+# historical interest only.
+
+#### Amtek Business Machines
+#
+
+# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
+# but these caps were commented out in 8.3; also, removed overridden
+# ":do=^J:" -- esr)
+abm80|amtek business machines 80,
+ OTbs, am, bw,
+ cols#80, lines#24,
+ cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
+ cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
+ dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
+
+#### Bell Labs blit terminals
+#
+# These were AT&T's official entries. The 5620 FAQ maintained by
+# David Breneman <daveb@dgtl.com> has this to say:
+#
+# Actually, in the beginning was the Jerq, and the Jerq was white with a
+# green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
+# was good. But lo, upon the horizon loomed a mighty management-type person
+# (known now only by the initials VP) who said, the mighty Jerq must stay
+# alone, and could not go forth into the world. So Locanthi and Pike put the
+# Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
+# world. And the Jerq lived the rest of its days in research, but never
+# strayed from those paths.
+#
+# In all seriousness, the Blit was originally known as the Jerq, but when
+# it started to be shown outside of the halls of the Bell Labs Research
+# organization, the management powers that be decided that the name could
+# not remain. So it was renamed to be Blit. This was in late 1981.
+#
+# (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
+# 730, and 730+.)
+#
+
+blit|jerq|blit running teletype rom,
+ am, eo, ul, xon,
+ cols#87, it#8, lines#72,
+ bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
+ cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
+ dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
+ dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
+ il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
+
+# (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
+cbblit|fixterm|blit running columbus code,
+ cols#88,
+ ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
+ rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
+ smul=\EU", use=blit,
+
+oblit|ojerq|first version of blit rom,
+ am, da, db, eo, mir, ul, xon,
+ cols#88, it#8, lines#72,
+ bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
+ cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
+ dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
+ ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
+ smir=\EQ,
+
+#### Bolt, Beranek & Newman (bbn)
+#
+# The BitGraph was a product of the now-defunct BBN Computer Corporation.
+# The parent company, best known as the architects of the Internet, is
+# still around.
+#
+# Jeff DelPapa <dp@world.std.com> writes:
+# The bitgraph was a large white box that contained a monochrome bitmap
+# display, and a 68000 to run it. You could download code and run it on
+# the cpu, it had 128kb (I think) of memory. I used one in the late
+# 70's, sure beat a vt100. It had one strange feature tho -- it used
+# the cpu to bitblt pixels to scroll, it took longer than the refresh
+# rate, and looked like a rubber sheet stretching, then snapping
+# upwards. It had everything the early mac had, except a floppy drive a
+# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
+# Beranek and Neuman) sold at most a few hundred of them to the real
+# world. DOD may have bought more...
+#
+
+# Entries for the BitGraph terminals. The problem
+# with scrolling in vi can only be fixed by getting BBN to put
+# smarter scroll logic in the terminal or changing vi or padding
+# scrolls with about 500 ms delay.
+#
+# I always thought the problem was related to the terminal
+# counting newlines in its input buffer before scrolling and
+# then moving the screen that much. Then vi comes along and
+# paints lines in on the bottom line of the screen, so you get
+# this big white gap.
+
+bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
+ flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
+ use=bg2.0,
+bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
+ flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
+ use=bg2.0,
+bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
+ OTbs, xenl,
+ cols#85, lines#64,
+ bel=^G, clear=\E[H\E[J$<150>, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
+ ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
+ ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
+ lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
+ sgr0=\E[m, smkx=\E=, smso=\E[7m,
+
+bg1.25rv|bbn bitgraph 1.25 (reverse video),
+ flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
+ use=bg1.25,
+bg1.25nv|bbn bitgraph 1.25 (normal video),
+ flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
+ use=bg1.25,
+# (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
+bg1.25|bbn bitgraph 1.25,
+ cols#85, lines#64,
+ bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
+ dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
+ il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
+ lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
+ rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
+ smso=\E[7m,
+
+#### Bull (bq, dku, vip)
+#
+# (Adapted for terminfo; AIX extension capabilities translated -- esr)
+
+#============================================#
+# BULL QUESTAR 210 `SDP' terminals emulation #
+#============================================#
+#
+# Description written by R.K.Saunders (Bull Transac)
+#
+# Modifications written by F. Girard (Bull MTS)
+# 19-05-87 V02.00.01
+# 17-12-87 V02.00.02
+# 15-09-89 V02.00.05
+#
+# Typical technical selections F1 (modes SDP/ROLL):
+# -------------------------------------------------------
+# | 01 02 03 04 05 06 07 08 09 10 |
+# | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
+# | |
+# | 11 12 13 14 15 16 17 18 19 20 |
+# | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
+# | |
+# | 21 22 23 24 25 26 27 28 29 30 |
+# | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
+# | |
+# | 31 32 33 34 35 36 37 38 39 40 |
+# | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
+# -------------------------------------------------------
+# Typical firmware identification F5 "etat 6":
+# P287.02.04b (AZERTY)
+# P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
+# P298.03.03 (monochrome) or P374.03.02 (colour)
+#
+# SM SDP mode (VIP command): ^[[?=h
+# RIS (erases screen): ^[c
+# DMI disable keyboard: ^[`
+# SM double rendition mode: ^[[?>h
+# RM solicited status mode: ^[[5l
+# RM character mode: ^[[>l
+# RM echoplex mode: ^[[12l
+# RM column tab mode: ^[[18l
+# RM forbid SS2 keyboard mode: ^[[?<l
+# SM scroll mode: ^[[=h
+# FCF enable XON/XOFF: ^[P1s^[\
+# MTL select end msg character: ^[[^Wp
+# EMI enable keyboard: ^[b
+# RIS retour etat initial: ^[c
+# enable FC keypad: ^[[?<h,
+# MPW map status line window: ^[PY99:98^[\
+# SCP select status line: ^[[0;98v
+# ED erase entire partition: ^[[2J
+# SCP select main partition: ^[[v
+# SM character insertion mode: ^[[4h
+# RM character replacement mode: ^[[4l
+# COO cursor on: ^[[r
+# COO cursor off: ^[[1r
+# SGR dim (turquoise) rev attr: ^[[2;7m
+# SGR Data normal attr: ^[[m
+# SO Line-graphic mode ON: ^N
+# SI Line-graphic mode OFF: ^O
+# MC start routing to printer: ^[[5i
+# MC stop routing to printer: ^M^[[4i
+#
+
+# This entry covers the following terminals:
+# dku7102, tws2102, and tws models 2105 to 2112
+tws-generic|dku7102|Bull Questar tws terminals,
+ am, eslok, hs, mir, msgr, xenl, xhp@, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
+ bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
+ cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
+ cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
+ fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, invis=\E[0;8m,
+ is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
+ is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
+ is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
+ ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
+ kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
+ kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
+ khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
+ mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
+ rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
+ rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
+ sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
+ smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g,
+ tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
+tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
+ dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
+ use=tws-generic,
+tws2103|xdku|BULL Questar tws2103,
+ ht=^I, use=tws-generic,
+tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
+ ht=^I, use=tws2102-sna,
+dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
+ clear=\E[2J\E[H, cup@, dl@, dl1@,
+ dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
+ il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
+ use=tws-generic,
+dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
+ blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
+ smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
+
+#=========================================================#
+# BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
+#=========================================================#
+#
+# Description written by J. Staerck (BULL SA)
+# Copyright (c) 1989 BULL SA
+#---------------------------------------------------------------------------
+# This entry is used for terminals with vt320 emulation mode
+# and following set-up :
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 7 bit Control Characters,
+# 80 columns screen.
+# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
+# They are used in string capabilities with vt220-320 emulation mode.
+# In the following DEC definitions, two kinds of terminfo databases are
+# provided :
+# 1. the first with Command Sequence Introducer starting with escape
+# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
+# 2. the second with Command Sequence Introducer starting with escape
+# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
+# Soft Terminal Reset esc [ ! p
+# RIS (erases screen): esc c
+# DECKPNM numeric keypad mode: esc >
+# DECKPAM applic. keypad mode: esc =
+# DECSTBM Scrolling region: esc [ r
+# SCS select G0 = US: esc ( B
+# SCS select G1 = line-graphic: esc ) 0
+# Select 7-bit C1 controls: esc sp F
+# Select 8-bit C1 controls: esc sp G
+# Select cursor home: esc [ H
+# Select erase screen: esc [ J
+# SM KAM lock keyboard: esc [ 2 h
+# RM KAM unlock keyboard: esc [ 2 l
+# SM SRM local echo off: esc [ 1 2 h
+# RM SRM local echo on: esc [ 1 2 l
+# SM LNM New line : esc [ 2 0 h
+# RM LNM return = CR only: esc [ 2 0 l
+# SM DECCKM cursor keys mode: esc [ ? 1 h
+# RM DECCKM appli. keys mode: esc [ ? 1 l
+# SM DECANM ANSI mode on: esc [ ? 2 h
+# RM DECANM ANSI mode off: esc [ ? 2 l
+# SM DECCOLM 132-column screen: esc [ ? 3 h
+# RM DECCOLM 80-column screen: esc [ ? 3 l
+# SM DECSCLM Smooth scroll: esc [ ? 4 h
+# RM DECSCLM Jump scroll: esc [ ? 4 l
+# SM DECSCNM screen light backgr. esc [ ? 5 h
+# RM DECSCNM screen dark backgr. esc [ ? 5 l
+# SM DECOM move within margins: esc [ ? 6 h
+# RM DECOM move outside margins: esc [ ? 6 l
+# SM DECAWM auto right margin: esc [ ? 7 h
+# RM DECAWM auto right margin: esc [ ? 7 l
+# SM DECARM auto repeat: esc [ ? 8 h
+# RM DECARM auto repeat: esc [ ? 8 l
+# DECSASD Select active main: esc [ 0 $ }
+# DECSASD Select active status: esc [ 1 $ }
+# DECSSDT Select status none: esc [ 0 $ ~
+# DECSSDT Select status indic.: esc [ 1 $ ~
+# DECSSDT Select status host-wr: esc [ 2 $ ~
+# SM DECTCEM Visible cursor: esc [ ? 2 5 h
+# RM DECTCEM Invisible cursor: esc [ ? 2 5 l
+# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
+# RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
+# SM DECNKM numeric keypad mode: esc [ ? 6 6 h
+# RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
+# SM DECKBUM clavier informatique esc [ ? 6 8 h
+# RM DECKBUM clavier bureautique: esc [ ? 6 8 l
+# DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
+# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
+# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
+# DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
+# Char. and Line attributes: esc [ Ps ... Ps m
+# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
+# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
+#
+
+# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
+bq300|Bull vt320 ISO Latin 1 80 columns terminal,
+ am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
+ el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ is1=\E[63;1"p\E[2h,
+ is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
+ kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
+ mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
+ rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
+ smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
+bq300-rv|Bull vt320 reverse 80 columns,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ use=bq300,
+bq300-w|Bull vt320 132 columns,
+ cols#132, wsl#132,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ rs2=\E[?3h, use=bq300,
+bq300-w-rv|Bull vt320 reverse mode 132 columns,
+ cols#132, wsl#132,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ rs2=\E[?3h, use=bq300,
+
+# This entry is used for terminals with vt320 emulation mode
+# and following set-up :
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 8 bit Control Characters, (CSI coded as x9B for ESC [)
+# 80 columns screen.
+# Soft Terminal Reset csi ! p
+# RIS (erases screen): esc c
+# DECKPNM numeric keypad mode: esc >
+# DECKPAM applic. keypad mode: esc =
+# DECSTBM Scrolling region: esc [ r
+# SCS select G0 = US: esc ( B
+# SCS select G1 = line-graphic: esc ) 0
+# Select 7-bit C1 controls: esc sp F
+# Select 8-bit C1 controls: esc sp G
+# Select cursor home: csi H
+# Select erase screen: csi J
+# SM KAM lock keyboard: csi 2 h
+# RM KAM unlock keyboard: csi 2 l
+# SM SRM local echo off: csi 1 2 h
+# RM SRM local echo on: csi 1 2 l
+# SM LNM New line : csi 2 0 h
+# RM LNM return = CR only: csi 2 0 l
+# SM DECCKM cursor keys mode: csi ? 1 h
+# RM DECCKM appli. keys mode: csi ? 1 l
+# SM DECANM ANSI mode on: csi ? 2 h
+# RM DECANM ANSI mode off: csi ? 2 l
+# SM DECCOLM 132-column screen: csi ? 3 h
+# RM DECCOLM 80-column screen: csi ? 3 l
+# SM DECSCLM Smooth scroll: csi ? 4 h
+# RM DECSCLM Jump scroll: csi ? 4 l
+# SM DECSCNM screen light backgr. csi ? 5 h
+# RM DECSCNM screen dark backgr. csi ? 5 l
+# SM DECOM move within margins: csi ? 6 h
+# RM DECOM move outside margins: csi ? 6 l
+# SM DECAWM auto right margin: csi ? 7 h
+# RM DECAWM auto right margin: csi ? 7 l
+# SM DECARM auto repeat: csi ? 8 h
+# RM DECARM auto repeat: csi ? 8 l
+# DECSASD Select active main: csi 0 $ }
+# DECSASD Select active status: csi 1 $ }
+# DECSSDT Select status none: csi 0 $ ~
+# DECSSDT Select status indic.: csi 1 $ ~
+# DECSSDT Select status host-wr: csi 2 $ ~
+# SM DECTCEM Visible cursor: csi ? 2 5 h
+# RM DECTCEM Invisible cursor: csi ? 2 5 l
+# SM DECNCRM 7 bits NCR set: csi ? 4 2 h
+# RM DECNCRM Multi or ISO latin: csi ? 4 2 l
+# DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
+# or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
+# DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
+# Char. and Line attributes: csi Ps ... Ps m
+# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
+# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
+# (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
+bq300-8|Bull vt320 full 8 bits 80 columns,
+ am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
+ clear=\233H\233J, cnorm=\233?25h, cr=^M,
+ csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
+ cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
+ dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM,
+ dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
+ el=\233K, el1=\2331K, enacs=\E(B\E)0,
+ flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
+ ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED,
+ is1=\E[63;2"p\E[2h,
+ is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
+ ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
+ kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
+ kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
+ kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
+ kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
+ kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
+ kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
+ khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
+ krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
+ lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
+ rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
+ rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
+ rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
+ sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
+ smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
+ smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
+bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
+ flash=\233?5l$<50>\233?5h,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ use=bq300-8,
+bq300-8w|Bull vt320 8-bit 132 columns,
+ cols#132, wsl#132,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ rs2=\233?3h, use=bq300-8,
+bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
+ cols#132, wsl#132,
+ flash=\233?5l$<50>\233?5h,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ rs2=\233?3h, use=bq300-8,
+
+# This entry is used for terminals with vt320 emulation mode
+# a 102 keys keyboard (PC scancode !) and following set-up :
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 7 bit Control Characters,
+# 80 columns screen.
+bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
+ kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
+ kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
+ kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
+ kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
+ kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
+bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ use=bq300-pc,
+bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
+ cols#132, wsl#132,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ rs2=\E[?3h, use=bq300-pc,
+bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
+ cols#132, wsl#132,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ rs2=\E[?3h, use=bq300-pc,
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 8 bit Control Characters,
+# 80 columns screen.
+bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
+ kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
+ kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
+ kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
+ kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
+ kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
+ khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
+ kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
+bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ use=bq300-8-pc,
+bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
+ cols#132, wsl#132,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ rs2=\E[?3h, use=bq300-8-pc,
+bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
+ cols#132, wsl#132,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ rs2=\E[?3h, use=bq300-8-pc,
+
+#======================================================#
+# BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
+#======================================================#
+
+# normal mode, 8 bits, 80 columns terminal.
+# RES reset : ^[e
+# RIS reset initial state: ^[c
+# BLE bell enable ^[h
+# BLD bell disable ^[g
+# CAMS char. attr. mode set ^[[D
+# CAMR char. attr. mode reset ^[[G
+# CLR clear ^[`
+# KBU keyboard unlock (set) ^[[W
+# KBL keyboard lock (reset) ^[[X
+# CM character mode (async.) ^[k
+# NEP non echoplex mode (by host) ^[l
+# EP echoplex mode (by host) ^[m
+# IM insert mode set ^[[I
+# IM insert mode reset ^[[J
+# RMS roll mode set ^[r
+# RMR roll mode reset ^[q
+# SM78 set mode vip7800 ^[[1q
+# SD scroll up (72 lines) ^[[0s
+# SD scroll down (72 lines) ^[[1s
+# RBM block mode reset ^[[E
+# SLS status line set ^[w
+# SLR status line reset ^[v
+# SLL status line lock ^[O
+# LGS Line-graphic mode set ^[G
+# LGR Line-graphic mode reset ^[F
+# TBC tab clear (at cursor pos.) ^[[g
+# TBI tab initialize ^[[N
+# TBS tab set (at cursor pos.) ^[p
+# PDS print data space ^[[0p
+# PHD print host data ^[[3p
+# PDT print data terminator ^[[<p
+# PRES print adapter reset ^[[2p
+# SSPR multi-part. reset ^[[<>u
+# SSP0 partition 0 set ^[[00u
+# SSP1 partition n format 1 ^[[PnPnSTRINGu
+# SSP2 partition n format 2 ^[[PnPnSTRINGu
+# SSP3 partition n format 3 ^[[PnPnu
+# ATR attribute (visual)
+# blink : ^[sB
+# dim : ^[sL
+# hide (blank) : ^[sH
+# restore : ^[sR
+# inverse video : ^[sI
+# prot. : ^[sP
+# underline : ^[s_
+# reset : ^{
+#
+# This covers the vip7800 and BQ3155-vip7800
+vip|Bull Questar 3155-7800,
+ am, eslok, hs, km, mc5i, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3, wsl#80,
+ acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
+ cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
+ dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
+ flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
+ hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
+ is2=\E[00u\E[<>001001024080024080u\E[01u,
+ is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
+ kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
+ kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
+ kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
+ kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
+ kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
+ kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
+ khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
+ kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
+ lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
+ mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
+ ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
+ rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
+ sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
+ smul=\Es_, tbc=\E[N, tsl=\Ew,
+# normal screen, 8 bits, 132 columns terminal.
+vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
+ cols#132, wsl#132,
+ is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
+vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
+ lines#72,
+ is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
+vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
+ cols#132, lines#72, wsl#132,
+ is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
+
+#### Chromatics
+#
+
+# I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
+# that is smaller than the screen, and puts up a warning message
+# outside the window. Te erases the warning message, puts the
+# window back to be the whole screen, and puts the cursor at just
+# below the small window. I defined <cnorm> and <civis> to really turn
+# the cursor on and off, but I have taken this out since I don't
+# like the cursor being turned off when vi exits.
+cg7900|chromatics|chromatics 7900,
+ am,
+ cols#80, lines#40,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
+ cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
+ ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
+ rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
+ rmso=\001C1\,\001c2\,,
+ smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
+ smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
+
+#### Computer Automation
+#
+
+ca22851|computer automation 22851,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
+ cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
+ kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
+
+#### Cybernex
+#
+
+# This entry has correct padding and the undocumented "ri" capability
+cyb83|xl83|cybernex xl-83,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
+ cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
+ ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
+ kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
+# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
+cyb110|mdl110|cybernex mdl-110,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
+ cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
+ dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
+ ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
+ ht=\011$<43>, ich1=\016A\035$<3.5>,
+ il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
+
+#### Datapoint
+#
+# Datapoint is gone. They used to be headquartered in Texas.
+# They created ARCnet, an Ethernet competitor that flourished for a while
+# in the early 1980s before 3COM got wise and cut its prices. The service
+# side of Datapoint still lives (1995) in the form of Intelogic Trace.
+#
+
+dp3360|datapoint|datapoint 3360,
+ OTbs, am,
+ cols#82, lines#25,
+ bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
+ ed=^_, el=^^, home=^], ind=^J,
+
+# From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
+# The Datapoint 8242 Workstation was sold at least between 1985
+# and 1989. To make the terminal work with this entry, press
+# CONTROL-INT-INT to take the terminal off-line, and type (opt).
+# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
+# CR/LF off. Use control-shift-[] as escape key, control-I as tab,
+# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
+# fact unusable because the strings sent by the terminal conflict
+# with other keys).
+# The terminal is capable of displaying "box draw" characters.
+# For each graphic character you must send 2 ESC's (\E\E) followed
+# by a control character as follows:
+# character meaning
+# ========= =======
+# ctrl-E top tee
+# ctrl-F right tee
+# ctrl-G bottom tee
+# ctrl-H left tee
+# ctrl-I cross
+# ctrl-J top left corner
+# ctrl-K top right corner
+# ctrl-L bottom left corner
+# ctrl-M bottom right corner
+# ctrl-N horizontal line
+# ctrl-O vertical line
+# Unfortunately this cannot be fitted into the termcap/terminfo
+# description scheme.
+dp8242|datapoint 8242,
+ msgr,
+ cols#80, lines#25,
+ bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
+ cr=^M, cub1=^H, cud1=^J,
+ cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
+ home=^U, ht=^I, il1=\E^T, ind=^C,
+ is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
+ kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
+ kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
+ kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
+ rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
+ rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
+ smso=\E^E, smul=\E^F,
+ wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
+
+#### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
+#
+# These entries are DEC's official terminfos for its older terminals.
+# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
+# Engineering for more information. Updated terminfos and termcaps
+# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
+#
+
+gt40|dec gt40,
+ OTbs, os,
+ cols#72, lines#30,
+ bel=^G, cr=^M, cub1=^H, cud1=^J,
+gt42|dec gt42,
+ OTbs, os,
+ cols#72, lines#40,
+ bel=^G, cr=^M, cub1=^H, cud1=^J,
+vt50|dec vt50,
+ OTbs,
+ cols#80, lines#12,
+ bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
+vt50h|dec vt50h,
+ OTbs,
+ cols#80, lines#12,
+ bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, ht=^I, ind=^J, ri=\EI,
+# (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
+vt61|vt-61|vt61.5|dec vt61,
+ cols#80, lines#24,
+ bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
+ cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
+ cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
+ ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ ri=\E$<20>I,
+
+# The gigi does standout with red!
+# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
+gigi|vk100|dec gigi graphics terminal,
+ OTbs, am, xenl,
+ cols#84, lines#24,
+ bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
+ el=\E[K, ht=^I, ind=^J,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
+ rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
+ smul=\E[4m,
+
+# DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
+# a PC differentiated from the IBM clones. It was a total, ludicrous,
+# grossly-overpriced failure (among other things, DEC's OS didn't include
+# a format program, so you had to buy pre-formatted floppies from DEC at
+# a hefty premium!).
+pro350|decpro|dec pro console,
+ OTbs,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
+ kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
+ rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
+
+dw1|decwriter I,
+ OTbs, hc, os,
+ cols#72,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
+dw2|decwriter|dw|decwriter II,
+ OTbs, hc, os,
+ cols#132,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
+# \E(B Use U.S. character set (otherwise # => british pound !)
+# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
+# \E[w 10 char/in pitch
+# \E[1;132 full width horizontal margins
+# \E[2g clear all tab stops
+# \E[z 6 lines/in
+# \E[66t 66 lines/page (for \f)
+# \E[1;66r full vertical page can be printed
+# \E[4g clear vertical tab stops
+# \E> disable alternate keypad mode (so it transmits numbers!)
+# \E[%i%p1%du set tab stop at column %d (origin == 1)
+# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
+# a tab stop)
+#
+# The dw3 does standout with wide characters.
+#
+dw3|la120|decwriter III,
+ OTbs, hc, os,
+ cols#132,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
+ is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
+ is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
+ kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
+dw4|decwriter IV,
+ OTbs, am, hc, os,
+ cols#132,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
+ kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
+
+# These aren't official
+ln03|dec ln03 laser printer,
+ hc,
+ cols#80, lines#66,
+ bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
+ rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
+ smul=\E[4m,
+ln03-w|dec ln03 laser printer 132 cols,
+ cols#132,
+ bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
+ kcud1=^J, nel=^M^J, use=ln03,
+
+#### Delta Data (dd)
+#
+
+# Untested. The cup sequence is hairy enough that it probably needs work.
+# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
+# There are BSD-derived termcap entries floating around for this puppy
+# that are *certainly* wrong.
+delta|dd5000|delta data 5000,
+ OTbs, am,
+ cols#80, lines#27,
+ bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
+ cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
+ cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
+
+#### Digital Data Research (ddr)
+#
+
+# (ddr: I added <rmam>/<smam> based on the init string -- esr)
+ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
+ OTbs, am, xenl,
+ cols#80, it#8, lines#24, vt#3,
+ blink=\E[5m$<2/>, bold=\E[1m$<2/>,
+ clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
+ cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
+ cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
+ ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
+ rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
+ rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m$<2/>,
+
+#### Evans & Sutherland
+#
+
+# Jon Leech <leech@cs.unc.edu> tells us:
+# The ps300 was the Evans & Sutherland Picture System 300, a high
+# performance 3D vector graphics system with a bunch of specialized hardware.
+# Approximate date of release was 1982 (early 80s, anyway), and it had several
+# evolutions including (limited) color versions such as the PS330C. PS300s
+# were effectively obsolete by the late 80s, replaced by raster graphics
+# systems, although specialized applications like molecular modelling
+# hung onto them for a while longer. AFAIK all E&S vector graphics systems
+# are out of production, though of course E&S is very much alive (in 1996).
+# (ps300: changed ":pt@:" to "it@" -- esr)
+#
+ps300|Picture System 300,
+ xt,
+ it@,
+ rmso@, rmul@, smso@, smul@, use=vt100,
+
+#### General Electric (ge)
+#
+
+terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
+ OTbs, hc, os,
+ cols#120,
+ bel=^G, cr=^M, cud1=^J, ind=^J,
+
+#### Heathkit/Zenith
+#
+
+# Here is a description of the H19 DIP switches:
+#
+# S401
+# 0-3 = baud rate as follows:
+#
+# 3 2 1 0
+# --- --- --- ---
+# 0 0 1 1 300 baud
+# 0 1 0 1 1200 baud
+# 1 0 0 0 2400 baud
+# 1 0 1 0 4800 baud
+# 1 1 0 0 9600 baud
+# 1 1 0 1 19.2K baud
+#
+# 4 = parity (0 = no parity)
+# 5 = even parity (0 = odd parity)
+# 6 = stick parity (0 = normal parity)
+# 7 = full duplex (0 = half duplex)
+#
+# S402
+# 0 = block cursor (0 = underscore cursor)
+# 1 = no key click (0 = keyclick)
+# 2 = wrap at end of line (0 = no wrap)
+# 3 = auto LF on CR (0 = no LF on CR)
+# 4 = auto CR on LF (0 = no CR on LF)
+# 5 = ANSI mode (0 = VT52 mode)
+# 6 = keypad shifted (0 = keypad unshifted)
+# 7 = 50Hz refresh (1 = 60Hz refresh)
+#
+# Factory Default settings are as follows:
+# 7 6 5 4 3 2 1 0
+# S401 1 0 0 0 1 1 0 0
+# S402 0 0 0 0 0 0 0 0
+# (h19: I added <rmam>/<smam> based on the init string;
+# also added empty <acsc> to suppress a tic warning -- esr)
+h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
+ OTbs, am, mir, msgr,
+ cols#80, it#8, lines#24,
+ acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
+ cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
+ is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
+ kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
+ kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
+ kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
+ ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
+ smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
+h19-bs|heathkit w/keypad shifted,
+ rmkx=\Eu, smkx=\Et, use=h19-b,
+h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
+ rmkx=\Eu, smkx=\Et, use=h19-u,
+# (h19: merged in <ip> from BSDI hp19-e entry>;
+# also added empty <acsc> to suppress a tic warning --esr)
+# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
+# Tim tells us that:
+# I have an old Zenith-19 terminal at home that still gets a lot of use.
+# This terminal suffers from the same famous insert-mode padding lossage
+# that has been acknowledged for the Z29 terminal. Emacs is nearly
+# unusable on this box, since even a half-scroll up or down the window
+# causes flaming terminal death.
+#
+# On the Z19, the only way I have found around this problem is to remove
+# the :al: and :dl: entries entirely. No amount of extra padding will
+# help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
+# makes Emacs a little slower, but it remains in the land of the living.
+# Big win.
+h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
+ OTbs, am, eslok, hs, mir, msgr,
+ cols#80, it#8, lines#24,
+ acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{, bel=^G,
+ clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
+ dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
+ ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
+ kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
+ lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
+ smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
+h19-u|heathkit with underscore cursor,
+ cnorm@, cvvis@, use=h19-b,
+h19-g|h19g|heathkit w/block cursor,
+ cnorm=\Ex4, cvvis@, use=h19-b,
+alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
+ lines#60,
+ dl1=\EM, il1=\EL, use=h19,
+
+# The major problem with the Z29 is that it requires more padding than the Z19.
+#
+# The problem with declaring an H19 to be synonymous with a Z29 is that
+# it needs more padding. It especially loses if a program attempts
+# to put the Z29 into insert mode and insert text at 9600 baud. It
+# even loses worse if the program attempts to insert tabs at 9600
+# baud. Adding padding to text that is inserted loses because in
+# order to make the Z29 not die, one must add so much padding that
+# whenever the program tries to use insert mode, the effective
+# rate is about 110 baud.
+#
+# What program would want to put the terminal into insert mode
+# and shove stuff at it at 9600 baud you ask?
+#
+# Emacs. Emacs seems to want to do the mathematically optimal
+# thing in doing a redisplay rather than the practical thing.
+# When it is about to output a line on top of a line that is
+# already on the screen, instead of just killing to the end of
+# the line and outputting the new line, it compares the old line
+# and the new line and if there are any similarities, it
+# constructs the new line by deleting the text on the old line
+# on the terminal that is already there and then inserting new
+# text into the line to transform it into the new line that is
+# to be displayed. The Z29 does not react kindly to this.
+#
+# But don't cry for too long.... There is a solution. You can make
+# a termcap entry for the Z29 that says the Z29 has no insert mode.
+# Then Emacs cannot use it. "Oh, no, but now inserting into a
+# line will be really slow", you say. Well there is a sort of a
+# solution to that too. There is an insert character option on
+# the Z29 that will insert one character. Unfortunately, it
+# involves putting the terminal into ansi mode, inserting the
+# character, and changing it back to H19 mode. All this takes 12
+# characters. Pretty expensive to insert one character, but it
+# works. Either Emacs doesn't try to use its inserting hack when
+# it's only given an insert character ability or the Z29 doesn't
+# require padding with this (the former is probably more likely,
+# but I haven't checked it out).
+# (z29: added empty <acsc> to suppress a tic warning, merged in
+# status line capabilities from BRL entry --esr)
+z29|zenith29|z29b|zenith z29b,
+ OTbs, OTpt, am, eslok, hs, mir, msgr,
+ OTkn#10, cols#80, lines#24,
+ OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
+ cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
+ cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
+ ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
+ ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
+ is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
+ kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
+ lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
+ rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
+ tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
+# z29 in ansi mode. Assumes that the cursor is in the correct state, and that
+# the world is stable. <rs1> causes the terminal to be reset to the state
+# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
+# cursor, bc -> block cursor.
+# From: Mike Meyers
+# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
+# looks vt100-compatible -- esr)
+z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
+ OTbs, OTpt, am, eslok, hs, mir, msgr,
+ OTkn#10, cols#80, it#8, lines#24,
+ OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
+ cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
+ dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
+ ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
+ ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
+ kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
+ kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
+ nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
+ rmso=\E[m, rmul=\E[m,
+ rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
+ sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
+z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
+ rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
+ use=z29a,
+z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
+ rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
+ use=z29a,
+z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
+ rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
+ use=z29a,
+# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
+z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
+ am, eslok, hs, mc5i, mir, msgr, xon,
+ cols#80, lines#24,
+ acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
+ clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
+ fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
+ ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
+ ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
+ kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
+ kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
+ mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
+ rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
+ rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
+ smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[s\E[>1h\E[25;%i%p1%dH,
+
+# From: Brad Brahms <Brahms@USC-ECLC>
+z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
+ cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
+# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
+z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
+ OTbs, OTpt, mir, msgr,
+ OTkn#10, cols#80, it#8, lines#24,
+ acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{,
+ clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
+ cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
+ home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
+ kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
+ khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
+ smir=\E@, smso=\Ep,
+p19|h19-b with il1/dl1,
+ dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
+# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
+# (ztx: removed duplicate :sr: -- esr)
+ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
+ OTbs, am, eslok, hs,
+ cols#80, it#8, lines#24,
+ clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
+ dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
+ il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
+ kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
+ kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
+ ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
+ tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
+
+#### IMS International (ims)
+#
+# There was a company called IMS International located in Carson City,
+# Nevada, that flourished from the mid-70s to mid-80s. They made S-100
+# bus/Z80 hardware and a line of terminals called Ultimas.
+#
+
+# From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
+ims950-b|bare ims950 no init string,
+ is2@, use=ims950,
+# (ims950: removed obsolete ":ko@:" -- esr)
+ims950|ims televideo 950 emulation,
+ xenl@,
+ flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
+ kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
+# (ims950-rv: removed obsolete ":ko@:" -- esr)
+ims950-rv|ims tvi950 rev video,
+ xenl@,
+ flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
+ kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
+ims-ansi|ultima2|ultimaII|IMS Ultima II,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ clear=\E[H\E[2J, cub1=^H, cud1=\ED,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
+ ht=^I, if=/usr/share/tabset/vt100,
+ is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
+ rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
+ smul=\E[4m,
+
+#### Intertec Data Systems
+#
+# I think this company is long dead as of 1995. They made an early CP/M
+# micro called the "Intertec Superbrain" that was moderately popular,
+# then sank out of sight.
+#
+
+superbrain|intertec superbrain,
+ OTbs, am, bw,
+ cols#80, lines#24,
+ OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
+ cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
+ ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
+ kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
+# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
+# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
+# and the reverse is actually true. Try it. -- esr)
+intertube|intertec|Intertec InterTube,
+ OTbs, am,
+ cols#80, lines#25,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
+ ind=^J, rmso=\E0@, smso=\E0P,
+# The intertube 2 has the "full duplex" problem like the tek 4025: if you
+# are typing and a command comes in, the keystrokes you type get interspersed
+# with the command and it messes up
+intertube2|intertec data systems intertube 2,
+ OTbs,
+ cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
+ el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
+ ll=^K^X\r, vpa=\013%p1%c, use=intertube,
+
+#### Ithaca Intersystems
+#
+# This company made S100-bus personal computers long ago in the pre-IBM-PC
+# past. They used to be reachable at:
+#
+# Ithaca Intersystems
+# 1650 Hanshaw Road
+# Ithaca, New York 14850
+#
+# However, the outfit went bankrupt years ago.
+#
+
+# The Graphos III was a color graphics terminal from Ithaca Intersystems.
+# These entries were written (originally in termcap syntax) by Brian Yandell
+# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
+# University of Wisconsin.
+
+# (graphos: removed obsolete and syntactically incorrect :kn=4:,
+# removed <if=/usr/share/tabset/init.graphos> and
+# <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
+graphos|graphos III,
+ am, mir,
+ cols#80, it#8, lines#24,
+ clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
+ cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
+ il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
+ rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
+ smir=\E[4h, smso=\E[7m,
+graphos-30|graphos III with 30 lines,
+ lines#30,
+ cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
+
+#### Modgraph
+#
+# These people used to be reachable at:
+#
+# Modgraph, Inc
+# 1393 Main Street,
+# Waltham, MA 02154
+# Vox: (617)-890-5796.
+#
+# However, if you call that number today you'll get an insurance company.
+# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
+# 26 Feb 1997 that says:
+#
+# Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
+# for ~7 years. Modgraph still in business. Products are rugged laptop and
+# portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
+# panel-mount etc). I can be emailed at sonfour@aol.com
+#
+# Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
+# dated 1984. According to the manual, it featured Tek 4010/4014
+# graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
+#
+
+modgraph|mod24|modgraph terminal emulating vt100,
+ xenl@,
+ cols#80, lines#24,
+ cvvis=\E\^9;0s\E\^7;1s,
+ is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
+ rf@, ri=\EM\E[K$<5/>, use=vt100,
+# The GX-1000 manual is dated 1984. This looks rather like a VT-52.
+modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
+ am, da, db,
+ cols#80, it#8, lines#24,
+ clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
+ ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
+ is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
+ ri=\EI$<5/>,
+#
+# Modgraph from Nancy L. Cider <nancyc@brl-tbd>
+# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
+# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
+# mark and using delete-to-killbuffer work correctly. However, we would
+# like normal mode of operation to be using a Modgraph with 48 line setting.
+# If we set TERM=mod (which is a valid entry in termcap with 48 lines)
+# the setting mark and delete-to-killbuffer results in the deletion of only
+# the line the mark is set on.
+# We've discovered that the delete-to-killbuffer works correctly
+# with TERM=mod and screen set to 80x48 but it's not obvious. Only
+# the first line disappears but a ctrl-l shows that it did work
+# correctly.
+modgraph48|mod|Modgraph w/48 lines,
+ OTbs, OTpt, am, xenl,
+ cols#80, it#8, lines#48, vt#3,
+ OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
+ cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
+ home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
+ ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
+ smso=\E[7m, smul=\E[4m,
+
+#### Morrow Designs
+#
+# This was George Morrow's company. They started in the late 1970s making
+# S100-bus machines. They used to be reachable at:
+#
+# Morrow
+# 600 McCormick St.
+# San Leandro, CA 94577
+#
+# but they're long gone now (1995).
+#
+
+# The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
+# Jeff's specimen was dated June 1984.
+# From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
+mt70|mt-70|Morrow MD-70; native Morrow mode,
+ am, mir, msgr, xon,
+ cols#80, it#8, lines#24,
+ acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
+ cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
+ cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
+ cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
+ flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
+ ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
+ kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
+ kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
+ kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
+ kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
+ rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
+ smul=\EG1, tbc=\E0, use=adm+sgr,
+
+#### Motorola
+#
+
+# Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
+# (Seth H Zirin)
+ex155|Motorola Exorterm 155,
+ OTbs, am, bw,
+ OTkn#5, OTug#1, cols#80, lines#24,
+ cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
+ cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
+ home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
+ kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
+ rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
+
+#### Omron
+#
+# This company is still around in 1995, manufacturing point-of-sale systems.
+
+omron|Omron 8025AG,
+ OTbs, am, da, db,
+ cols#80, lines#24,
+ bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
+ cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
+ il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
+
+#### Ramtek
+#
+# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
+# were competition for things like the Tektronics 4025.
+#
+
+# Ramtek 6221 from BRL, probably by Doug Gwyn
+# The following SET-UP modes are assumed for normal operation:
+# UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
+# NEWLINE_OFF 80_COLUMNS
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements; I recommend
+# SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
+# Hardware tabs are assumed to be every 8 columns; they can be set up by the
+# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
+# Note that the Control-E key is useless on this brain-damaged terminal. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+rt6221|Ramtek 6221 80x24,
+ OTbs, OTpt, msgr, xon,
+ OTkn#4, cols#80, it#8, lines#24, vt#3,
+ acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
+ clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
+ cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
+ hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
+ kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
+ nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
+ rmso=\E[m, rmul=\E[m,
+ rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
+ sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g,
+# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
+rt6221-w|Ramtek 6221 160x48,
+ cols#160, lines#48,
+ ll=\E[48;1H, use=rt6221,
+
+#### RCA
+#
+
+# RCA VP3301 or VP3501
+rca|rca vp3301/vp3501,
+ OTbs,
+ cols#40, lines#24,
+ clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
+
+
+#### Selanar
+#
+
+# Selanar HiREZ-100 from BRL, probably by Doug Gwyn
+# The following SET-UP modes are assumed for normal operation:
+# SET_DEFAULT_TABS 48_LINES 80_COLUMNS
+# ONLINE ANSI CURSOR_VISIBLE
+# VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
+# LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
+# CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
+# For use with graphics software, all graphics modes should be set to factory
+# default. Other SET-UP modes may be set for operator convenience or
+# communication requirements. No delays are specified; use "stty ixon -ixany"
+# to enable DC3/DC1 flow control!
+# I commented out the scrolling capabilities since they are too slow.
+hirez100|Selanar HiREZ-100,
+ OTbs, OTpt, mir, msgr, xon,
+ OTkn#4, cols#80, it#8, lines#48, vt#3,
+ acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
+ cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
+ kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
+ lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
+ mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
+ sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g,
+hirez100-w|Selanar HiREZ-100 in 132-column mode,
+ cols#132, use=hirez100,
+
+#### Signetics
+#
+
+# From University of Wisconsin
+vsc|Signetics Vsc Video driver by RMC,
+ am, msgr,
+ cols#80, it#8, lines#26,
+ clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
+ ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
+ rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
+
+#### Soroc
+#
+# Alan Frisbie <frisbie@flying-disk.com> writes:
+#
+# As you may recall, the Soroc logo consisted of their name,
+# with the letter "S" superimposed over an odd design. This
+# consisted of a circle with a slightly smaller 15 degree (approx.)
+# wedge with rounded corners inside it. The color was sort of
+# a metallic gold/yellow.
+#
+# If I had been more of a beer drinker it might have been obvious
+# to me, but it took a clue from their service department to make
+# me exclaim, "Of course!" The circular object was the top of
+# a beer can (the old removable pop-top style) and "Soroc" was an
+# anagram for "Coors".
+#
+# I can just imagine the founders of the company sitting around
+# one evening, tossing back a few and trying to decide what to
+# call their new company and what to use for a logo.
+#
+
+# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
+soroc120|iq120|soroc|soroc iq120,
+ clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
+ kcuf1=^L, kcuu1=^K, use=adm3a,
+soroc140|iq140|soroc iq140,
+ OTbs, am, mir,
+ cols#80, lines#24,
+ bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
+ dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
+ kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
+ rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
+
+#### Southwest Technical Products
+#
+# These guys made an early personal micro called the M6800.
+# The ct82 was probably its console terminal.
+#
+
+# (swtp: removed obsolete ":bc=^D:" -- esr)
+swtp|ct82|southwest technical products ct82,
+ am,
+ cols#82, lines#20,
+ bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
+ cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
+ home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
+ is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
+ ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
+
+#### Synertek
+#
+# Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
+#
+# Synertek used to make ICs, various 6502-based single-board process
+# control and hobbyist computers, and assorted peripherals including a
+# series of small inexpensive terminals (I think they were one of the
+# first to have a "terminal-on-a-keyboard", where the terminal itself
+# was only slightly larger than the keyboard).
+#
+# They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
+# was a 40x24 terminal that could connect to a standard TV through a
+# video modulator. The KTM-2/80 was the 80-column version (the 2/40
+# could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
+# I have a KTM-2/80 still in working order. The KTM-2s had fully
+# socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
+# ROM and 2 ROMs as character generators. They were incredibly simple,
+# and I've never had any problems with mine (witness the fact that mine
+# was made in 1981 and is still working great... I've blown the video
+# output transistor a couple of times, but it's a 2N2222 :-)
+#
+# The KTM-3 (which is what is listed in the terminfo file) was their
+# attempt at putting a KTM-2 in a box (and some models came with a
+# CRT). It wasn't much different from the KTM-2 hardware-wise, but the
+# control and escape sequences are very different. The KTM-3 was always
+# real broken, at least according to the folks I've talked to about it.
+#
+# The padding in the entry is probably off--these terminals were very
+# slow (it takes like 100ms for the KTM-2 to clear the screen...) And
+# anyone with any sanity replaced the ROMs with something that provided
+# a reasonable subset of VT100 functionality, since the usual ROMs were
+# obviously very primitive... oh, you could get an upgraded ROM from
+# Synertek for some incredible amount of money, but what hacker with an
+# EPROM burner would do that? :)
+#
+# Sorry I don't have any contact info; I believe they were located in
+# Sunnyvale, and I'm fairly sure they are still manufacturing ICs
+# (they've gone to ASICs and FPGAs), but I doubt they're in the computer
+# business these days.
+#
+
+# Tested, seems to work fine with vi.
+synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
+ am,
+ cols#80, lines#24,
+ clear=^Z, cub1=^H, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
+
+#### Tab Office Products
+#
+# TAB Products Co. - Palo Alto, California
+# Electronic Office Products,
+# 1451 California Avenue 94304
+#
+# I think they're out of business.
+#
+
+# The tab 132 uses xon/xoff, so no padding needed.
+# <smkx>/<rmkx> have nothing to do with arrow keys.
+# <is2> sets 80 col mode, normal video, autowrap on (for <am>).
+# Seems to be no way to get rid of status line.
+# The manual for this puppy was dated June 1981. It claims to be VT52-
+# compatible but looks more vt100-like.
+tab132|tab|tab132-15|tab 132/15,
+ da, db,
+ OTdN@, cols#80, lines#24, lm#96,
+ cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
+ il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
+ kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
+tab132-w|tab132 in wide mode,
+ cols#132,
+ is2=\E[?7h\E[?3h\E[?5l, use=tab132,
+tab132-rv|tab132 in reverse-video mode,
+ is2=\E[?7h\E[?3l\E[?5h, use=tab132,
+tab132-w-rv|tab132 in reverse-video/wide mode,
+ is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
+
+
+#### Teleray
+#
+# Research Incorporated
+# 6425 Flying Cloud Drive
+# Eden Prairie, MN 55344
+# Vox: (612)-941-3300
+#
+# The Teleray terminals were all discontinued in 1992-93. RI still services
+# and repairs these beasts, but no longer manufactures them. The Teleray
+# people believe that all the types listed below are very rare now (1995).
+# There was a newer line of Telerays (Model 7, Model 20, Model 30, and
+# Model 100) that were ANSI-compatible.
+#
+# Note two things called "teleray". Reorder should move the common one
+# to the front if you have either. A dumb teleray with the cursor stuck
+# on the bottom and no obvious model number is probably a 3700.
+#
+
+t3700|dumb teleray 3700,
+ OTbs,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
+t3800|teleray 3800 series,
+ OTbs,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
+ home=\EH, ht=^I, ind=^J, ll=\EY7\s,
+t1061|teleray|teleray 1061,
+ OTbs, am, km, xhp, xt,
+ cols#80, it#8, lines#24, xmc#1,
+ bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
+ dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
+ ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
+ is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
+ kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
+ kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
+ tbc=\EG,
+t1061f|teleray 1061 with fast PROMs,
+ dl1=\EM, il1=\EL, ip@, use=t1061,
+# "Teleray Arpa Special", officially designated as
+# "Teleray Arpa network model 10" with "Special feature 720".
+# This is the new (1981) fast microcode updating the older "arpa" proms
+# (which gave meta-key and programmable-fxn keys). 720 is much much faster,
+# converts the keypad to programmable function keys, and has other goodies.
+# Standout mode is still broken (magic cookie, etc) so is suppressed as no
+# programs handle such lossage properly.
+# Note: this is NOT the old termcap's "t1061f with fast proms."
+# From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
+# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
+t10|teleray 10 special,
+ OTbs, km, xhp, xt,
+ cols#80, it#8, lines#24, xmc#2,
+ clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
+ dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
+ ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
+ smul=\ERH,
+# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
+# back/forth words. Put the function keys (f1-f10) where they can be
+# found, and turn off the other magic keys along the top row, except
+# for line/local. Do the magic appropriate to make the page shifts work.
+# Also toggle ^S/^Q for those of us who use Emacs.
+t16|teleray 16,
+ am, da, db, mir, xhp, xt,
+ cols#80, lines#24,
+ bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
+ dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
+ ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
+ kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
+ rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m,
+
+#### Texas Instruments (ti)
+#
+
+# The Silent 700 was so called because it was built around a quiet thermal
+# printer. It was portable, equipped with an acoustic coupler, and pretty
+# neat for its day.
+ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
+ OTbs, hc, os,
+ cols#80,
+ bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
+
+#
+# Texas Instruments 916 VDT 7 bit control mode
+#
+ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
+ da, db, in, msgr,
+ cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
+ cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
+ cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
+ ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
+ enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
+ hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
+ il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
+ kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
+ kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
+ kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
+ kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
+ kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
+ smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+ use=vt220,
+#
+# Texas Instruments 916 VDT 8 bit control mode
+#
+ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
+ kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
+ kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
+ kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
+ kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
+ kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
+ kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
+#
+# Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
+#
+ti916-132|Texas Instruments 916 VDT vt220 132 column,
+ cols#132, use=ti916,
+#
+# Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
+#
+ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
+ cols#132, use=ti916-8,
+ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
+ OTbs, am, xon,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
+ csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+ cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
+ il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
+ ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g,
+ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
+ am, xon,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
+ csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+ cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
+ il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
+ kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
+ kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
+ kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
+ rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g,
+ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
+ cols#132, use=ti924,
+ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
+ cols#132, use=ti924-8,
+ti931|Texas Instruments 931 VDT,
+ OTbs, am, xon,
+ cols#80, lines#24,
+ bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
+ cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
+ ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
+ is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
+ kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
+ kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
+ sgr0=\E4@, smso=\E4A, smul=\E4D,
+ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
+ csr@, ind=\E[1S, ri=\E[1T, use=ti924,
+# (ti926-8: I corrected this from the broken SCO entry -- esr)
+ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
+ csr@, ind=\2331S, ri=\2331T, use=ti924-8,
+ti_ansi|basic entry for ti928,
+ am, bce, eo, xenl, xon,
+ colors#8, cols#80, it#8, lines#25, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
+ cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
+ il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
+ kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
+ kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
+ op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
+ smso=\E[7m, smul=\E[4m,
+#
+# 928 VDT 7 bit control mode
+#
+ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
+ kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
+ kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
+ kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
+ kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
+ kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
+#
+# 928 VDT 8 bit control mode
+#
+ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
+ kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
+ kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
+ kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
+ kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
+ kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
+ kpp=\233T, kprt=\23335~, use=ti_ansi,
+
+#### Zentec (zen)
+#
+
+# (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
+# had just <smso>=\EG6 which I think means standout was supposed to be
+# dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
+# <invis> might work-- esr)
+zen30|z30|zentec 30,
+ OTbs, am, mir, ul,
+ cols#80, lines#24,
+ bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
+ il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
+ smul@, use=adm+sgr,
+# (zen50: this had extension capabilities
+# :BS=^U:CL=^V:CR=^B:
+# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
+# which were also in the original entry -- esr)
+# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
+zen50|z50|zentec zephyr,
+ OTbs, am,
+ cols#80, lines#24, xmc#1,
+ clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
+ invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
+ rmul@, smul@, use=adm+sgr,
+
+# CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
+cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
+ OTbs, am, bw,
+ cols#80, lines#24,
+ blink=\EM", clear=\EH\EJ, cnorm=\EP,
+ csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
+ cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+ cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
+ invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
+ rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
+ smso=\EM$, smul=\EM0,
+
+######## OBSOLETE UNIX CONSOLES
+#
+
+#### Apollo consoles
+#
+# Apollo got bought by Hewlett-Packard. The Apollo workstations are
+# labeled HP700s now.
+#
+
+# From: Gary Darland <goodmanc@garnet.berkeley.edu>
+apollo|apollo console,
+ OTbs, am, mir,
+ cols#88, lines#53,
+ clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
+ ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
+ rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
+ smso=\ES, smul=\EU, vpa=\EO+\s,
+
+# We don't know whether or not the apollo guys replicated DEC's firmware bug
+# in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
+# both these capabilities.
+apollo_15P|apollo 15 inch display,
+ rmir@, smir@, use=vt132,
+apollo_19L|apollo 19 inch display,
+ rmir@, smir@, use=vt132,
+apollo_color|apollo color display,
+ rmir@, smir@, use=vt132,
+
+#### Convergent Technology
+#
+# Burroughs bought Convergent shortly before it merged with Univac.
+# CTOS is (I believe) dead. Probably the aws is too (this entry dates
+# from 1991 or earlier).
+#
+
+# Convergent AWS workstation from Gould/SEL UTX/32 via BRL
+# (aws: removed unknown :dn=^K: -- esr)
+aws|Convergent Technologies AWS workstation under UTX and Xenix,
+ am,
+ OTug#0, cols#80, lines#28, xmc#0,
+ OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
+ clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
+ dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
+ ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
+ kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
+ rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
+ vpa=\EV%p1%c,
+awsc|Convergent Technologies AWS workstation under CTOS,
+ am,
+ OTug#0, cols#80, lines#24, xmc#0,
+ OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
+ cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
+ el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
+ rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
+ smul=\EAC,
+
+#### DEC consoles
+#
+
+# The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
+# The digital uVax II's had a graphic display called a qdss. It was
+# supposed to be a high performance graphic accelerator, but it was
+# late to market and barely appeared before faster dumb frame buffers
+# appeared. I have only used this display while running X11. However,
+# during bootup, it was in text mode, and probably had a terminal emulator
+# within it. And that is what your termcap entry is for. In graphics
+# mode the screen size is 1024x864 pixels.
+qdss|qdcons|qdss glass tty,
+ OTbs, am,
+ cols#128, lines#57,
+ clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\E=%p1%c%p2%c, cuu1=^K,
+
+#### Fortune Systems consoles
+#
+# Fortune made a line of 68K-based UNIX boxes that were pretty nifty
+# in their day; I (esr) used one myself for a year or so around 1984.
+# They had no graphics, though, and couldn't compete against Suns and
+# the like. R.I.P.
+#
+
+# From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
+# (This had extension capabilities
+# :rv=\EH:re=\EI:rg=0:GG=0:\
+# :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
+# :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
+# :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
+# It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
+# ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
+# to force both magic cookie glitches off. Once upon a time, I
+# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
+# function keys; thus the "Al" value for HM was certainly an error. I renamed
+# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
+# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
+# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
+# names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
+fos|fortune|Fortune system,
+ OTbs, am, bw,
+ cols#80, lines#25,
+ acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
+ clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
+ cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
+ cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
+ ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
+ ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
+ kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
+ kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
+ kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
+ khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
+ rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
+ smso=^\H`, smul=^\HP,
+
+#### Masscomp consoles
+#
+# Masscomp has gone out of business. Their product line was purchased by
+# comany in Georgia (US) called "XS International", parts and service may
+# still be available through them.
+#
+
+# (masscomp: ":MT:" changed to ":km:"; -- esr)
+masscomp|masscomp workstation console,
+ OTbs, km, mir,
+ cols#80, it#8, lines#24,
+ clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
+ rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
+masscomp1|masscomp large screen version 1,
+ cols#104, lines#36, use=masscomp,
+masscomp2|masscomp large screen version 2,
+ cols#64, lines#21, use=masscomp,
+
+######## OTHER OBSOLETE TYPES
+#
+# These terminals are *long* dead -- these entries are retained for
+# historical interest only.
+#
+
+#### Obsolete non-ANSI software emulations
+#
+
+# CTRM terminal emulator
+# 1. underlining is not allowed with colors: first, is is simulated by
+# black on white, second, it disables background color manipulations.
+# 2. BLINKING, REVERSE and BOLD are allowed with colors,
+# so we have to save their status in the static registers A, B and H
+# respectively, to be able to restore them when color changes
+# (because any color change turns off ALL attributes)
+# 3. <bold> and <rev> sequences alternate modes,
+# rather than simply entering them. Thus we have to check the
+# static register B and H to determine the status, before sending the
+# escape sequence.
+# 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
+# and then reset colors
+# 5. implementation of the protect mode would badly penalize the performance.
+# we would have to use \E&bn sequence to turn off colors (as well as all
+# other attributes), and keep the status of protect mode in yet another
+# static variable. If someone really needs this mode, they would have to
+# create another terminfo entry.
+# 6. original color-pair is white on black.
+# store the information about colors into static registers
+# 7. set foreground color. it performs the following steps.
+# 1) turn off all attributes
+# 2) turn on the background and video attributes that have been turned
+# on before (this information is stored in static registers X,Y,Z,A,B,H,D).
+# 3) turn on foreground attributes
+# 4) store information about foreground into U,V,W static registers
+# 8. turn on background: similar to turn on foreground above
+ctrm|C terminal emulator,
+ am, bce, xon,
+ colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
+ pairs#63, pb#19200, vt#6,
+ bel=^G, blink=\E&dA%{1}%PA,
+ bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
+ clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
+ ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
+ il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
+ kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
+ kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
+ kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
+ op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
+ rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
+ setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
+ setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
+ sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
+ sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
+ smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+
+# gs6300 - can't use blue foreground, it clashes with underline;
+# it's simulated with cyan
+# Bug: The <op> capability probably resets attributes.
+# (gs6300: commented out <rmln> (no <smln>) --esr)
+gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
+ am, bce, msgr, xon,
+ colors#8, cols#80, it#8, lines#24, pairs#63,
+ acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
+ kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
+ khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
+ ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
+ setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
+ sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
+
+# From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
+# MS-Kermit with Heath-19 emulation mode enabled
+# (h19k: changed ":pt@:" to ":it@"
+h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
+ am@, da, db, xt,
+ it@,
+ ht@, use=h19-u,
+
+# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
+# Software (formerly Peripherals Computers & Supplies, Inc) of
+# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
+# also be reached at support@synergy.com.
+versaterm|versaterm vt100 emulator for the macintosh,
+ am, xenl,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
+ clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
+ cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
+ dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
+ el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
+ il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
+ rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
+ rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
+ sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
+ smul=\E[4m$<2/>,
+
+# From: Rick Thomas <ihnp4!btlunix!rbt>
+# (xtalk: I added <rmam>/<smam> based on the init string.
+xtalk|IBM PC with xtalk communication program (versions up to 3.4),
+ am, mir, msgr, xon,
+ cols#80, it#8, lines#24, vt#3, xmc#1,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
+ el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
+ il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rmso=\E[m\s,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
+ smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
+ tbc=\E[3g, use=vt100+fnkeys,
+
+# The official PC terminal emulator program of the AT&T Product Centers.
+# Note - insert mode commented out - doesn't seem to work on AT&T PC.
+simterm|attpc running simterm,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
+ dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
+ rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
+
+#### Daisy wheel printers
+#
+# This section collects Diablo, DTC, Xerox, Qume, and other daisy
+# wheel terminals. These are now largely obsolete.
+#
+
+# (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
+diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
+ hc, os,
+ cols#132, it#8,
+ cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
+ ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
+diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
+ cols#124,
+ is2=\r \E9, use=diablo1620,
+# (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
+diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
+ bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
+ use=diablo1620,
+# (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
+# file -- esr)
+diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
+ cols#124,
+ rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
+diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
+ use=diablo1640-lm,
+# DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
+# <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
+# The terminal has tabs, but I'm getting tired of fighting the braindamage.
+# If no tab is set or the terminal's in a bad mood, it glitches the screen
+# around all of memory. Note that return puts a blank ("a return character")
+# in the space the cursor was at, so we use ^P return (and thus ^P newline for
+# newline). Note also that if you turn off :pt: and let Unix expand tabs,
+# curses won't work (some old BSD versions) because it doesn't clear this bit,
+# and cursor addressing sends a tab for row/column 9. What a losing terminal!
+# I have been unable to get tabs set in all 96 lines - it always leaves at
+# least one line with no tabs in it, and once you tab through that line,
+# it completely weirds out.
+# (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
+dtc382|DTC 382,
+ am, da, db, xhp,
+ cols#80, lines#24, lm#96,
+ bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
+ cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
+ dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
+ home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
+ rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
+dtc300s|DTC 300s,
+ hc, os,
+ cols#132,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
+ hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
+gsi|mystery gsi terminal,
+ hc, os,
+ cols#132,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
+ ind=^J,
+aj830|aj832|aj|anderson jacobson,
+ hc, os,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
+ ind=^J,
+# From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
+aj510|Anderson-Jacobson model 510,
+ am, mir,
+ cols#80, lines#24,
+ clear=^L, cub1=^H, cuf1=\EX,
+ cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
+ dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
+ il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
+ kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
+ rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
+ smul=\E"U,
+# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
+# This is incomplete, but it's a start.
+nec5520|nec|spinwriter|nec 5520,
+ hc, os,
+ cols#132, it#8,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
+ hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
+ kbs=^H, tbc=\E3,
+qume5|qume|Qume Sprint 5,
+ hc, os,
+ cols#80, it#8,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
+ hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
+# I suspect the xerox 1720 is the same as the diablo 1620.
+xerox1720|x1720|x1750|xerox 1720,
+ hc, os,
+ cols#132, it#8,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
+ tbc=\E2,
+
+#### Miscellaneous obsolete terminals, manufacturers unknown
+#
+# If you have any information about these (like, a manufacturer's name,
+# and a date on the serial-number plate) please send it!
+
+cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
+ OTbs, am,
+ cols#73, lines#36,
+ clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
+cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
+ OTbs, am,
+ cols#85, lines#39,
+ clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
+ kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
+ kf4=\E8, rmso=\Em^C, smso=\Em^L,
+cops10|cops|cops-10|cops 10,
+ am, bw,
+ cols#80, lines#24,
+ bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
+ ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
+ khome=^Y,
+# (d132: removed duplicate :ic=\E5:,
+# merged in capabilities from a BRL entry -- esr)
+d132|datagraphix|datagraphix 132a,
+ da, db, in,
+ cols#80, lines#30,
+ bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
+ cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
+ dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
+ kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
+# The d800 was an early portable terminal from c.1984-85 that looked a lot
+# like the original Compaq `lunchbox' portable (but no handle). It had a vt220
+# mode (which is what this entry looks like) and several other lesser-known
+# emulations.
+d800|Direct 800/A,
+ OTbs, am, da, db, msgr, xhp,
+ cols#80, it#8, lines#24,
+ acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
+ bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
+ cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
+ ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+ smacs=\E[1m, smso=\E[7m, smul=\E[4m,
+digilog|digilog 333,
+ OTbs,
+ cols#80, lines#16,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
+ home=^N, ind=^J,
+# The DWK was a terminal manufactured in the Soviet Union c.1986
+dwk|dwk-vt|dwk terminal,
+ am,
+ cols#80, it#8, lines#24,
+ acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
+ bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
+ ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
+ kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
+ kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
+ kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
+ sgr0=\EX, smacs=\EF, smso=\ET,
+env230|envision230|envision 230 graphics terminal,
+ xenl@,
+ mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
+ use=vt100,
+# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
+# coupler attached, the whole rig fitting in a suitcase and more or less
+# portable. Hot stuff for c.1977 :-) -- esr
+ep48|ep4080|execuport 4080,
+ OTbs, am, os,
+ cols#80,
+ bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
+ep40|ep4000|execuport 4000,
+ cols#136, use=ep4080,
+# Adam Thompson <athompso@pangea.ca> tells us:
+# Informer series - these are all portable units, resembling older
+# automatic bread-baking machines. The terminal looks like a `clamshell'
+# design, but isn't. The structure is similar to the Direct terminals,
+# but only half the width. The entire unit is only about 10" wide.
+# It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
+# keyboard. All the keys are crammed together, much like some laptop
+# PCs today, but perhaps less well organized...all these units have a
+# bewildering array of plugs on the back, including a built-in modem.
+# The 305 was a color version of the 304; the 306 and 307 were mono and
+# color terminals built for IBM bisync protocols.
+# From: Paul Leondis <unllab@amber.berkeley.edu>
+ifmr|Informer D304,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
+ ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
+ smso=\EJ,
+# Entry largely based on wy60 and has the features of wy60ak.
+opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
+ am, bw, hs, km, mir, msgr, ul, xon,
+ cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
+ cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
+ cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
+ dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
+ ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
+ hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
+ ip=$<3>,
+ is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
+ kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
+ kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
+ mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
+ pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
+ pfx=\EZ1%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
+ rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
+ rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
+ rs3=\EwG\Ee($<150>,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
+ smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
+ smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
+ uc=\EG8\EG0, use=adm+sgr,
+teletec|Teletec Datascreen,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
+ home=^^, ind=^J,
+# From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
+# This description is for the LANPAR Technologies VISION 3220
+# terminal from 1984/85. The function key definitions k0-k5 represent the
+# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
+# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
+#
+# Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
+# I had a couple of scopes (3221) like this once where I used to work, around
+# the 1987 time frame if memory serves me correctly. These scopes were made
+# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
+# compatible. The 3220 was a plain text terminal like the VT-220, the 3221
+# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
+# was like the VT-241 (color with Regis + Sixel Graphics). These terminals
+# (3221) cost about $1500 each, and one was always broken -- had to be sent
+# back to the shop for repairs.
+# The only real advantage these scopes had over the VT-240's were:
+# 1) They were faster in the Regis display, or at least the ones I did
+# 2) They had a handy debugging feature where you could split-screen the
+# scope, the graphics would appear on the top, and the REGIS commands would
+# appear on the bottom. I don't remember the VT-240s being able to do that.
+# I would swear that LANPAR Technologies was in MA someplace, but since I
+# don't work at the same place anymore, and those terminals and manuals were
+# long since junked, I cannot be any more sure than that.
+#
+# (v3220: removed obsolete ":kn#10:",
+# I added <rmam>/<smam> based on the init string -- esr)
+v3220|LANPAR Vision II model 3220/3221/3222,
+ OTbs, am, mir, xenl,
+ cols#80, it#8, lines#24,
+ clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
+ is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
+ kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
+ kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
+ rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+ smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
+######## ICH/ICH1 VERSUS RMIR/SMIR
+#
+# Some non-curses applications get confused if both ich/ich1 and rmir/smir
+# are present; the symptom is doubled characters in an update using insert.
+# These applications are technically correct; in both 4.3BSD termcap and
+# terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
+# unless the terminal needs both. To my knowledge, no terminal still in this
+# file requires both other than the very obsolete dm2500.
+#
+# For ncurses-based applications this is not a problem, as ncurses uses
+# one or the other as appropriate but never mixes the two. Therefore we
+# have not corrected entries like `linux' and `xterm' that specify both.
+# If you see doubled characters from these, use the linux-nic and xterm-nic
+# entries that suppress ich/ich1. And upgrade to ncurses!
+#
+
+######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
+#
+# ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
+# ECMA-48 standards are said to be almost identical, but are not the same
+# as X3.64 (though for practical purposes they are close supersets of it).
+#
+# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
+# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
+# Coded Character Sets"), include your snail-mail address, and you should
+# receive the document in due course. Don't expect an email acknowledgement.
+#
+# Related standards include "X3.4-1977: American National Standard Code for
+# Information Interchange" (the ASCII standard) and "X3.41.1974:
+# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
+# American National Standard for Information Interchange." I believe (but
+# am not certain) that these are effectively identical to ECMA-6 and ECMA-35
+# respectively.
+#
+
+#### VT100/ANSI/ECMA-48
+#
+# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
+# and ECMA-48 Control Functions for Coded Character Sets.
+#
+# Much of the content of this comment is adapted from a table prepared by
+# Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
+# discussion of some terminfo-related issues, and updates to capture ECMA-48
+# have been added. Control functions described in ECMA-48 only are tagged
+# with * after their names.
+#
+# The table is a complete list of the defined ANSI X3.64/ECMA-48 control
+# sequences. In the main table, \E stands for an escape (\033) character,
+# SPC for space. Pn stands for a single numeric parameter to be inserted
+# in decimal ASCII. Ps stands for a list of such parameters separated by
+# semicolons. Parameter meanings for most parametrized sequences are
+# decribed in the notes.
+#
+# Sequence Sequence Parameter or
+# Mnemonic Name Sequence Value Mode terminfo
+# -----------------------------------------------------------------------------
+# APC Applicatn Program Command \E _ - Delim -
+# BEL Bell * ^G - - bel
+# BPH Break Permitted Here * \E B - * -
+# BS Backpace * ^H - EF -
+# CAN Cancel * ^X - - - (A)
+# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
+# CCH Cancel Previous Character \E T - - -
+# CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
+# CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
+# CMD Coding Method Delimiter * \E
+# CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
+# CPL Cursor Preceding Line \E [ Pn F 1 eF -
+# CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
+# CSI Control Sequence Intro \E [ - Intro -
+# CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
+# CUB Cursor Backward \E [ Pn D 1 eF cub
+# CUD Cursor Down \E [ Pn B 1 eF cud
+# CUF Cursor Forward \E [ Pn C 1 eF cuf
+# CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
+# CUU Cursor Up \E [ Pn A 1 eF cuu
+# CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
+# DA Device Attributes \E [ Pn c 0 - -
+# DAQ Define Area Qualification \E [ Ps o 0 - -
+# DCH Delete Character \E [ Pn P 1 eF dch
+# DCS Device Control String \E P - Delim -
+# DL Delete Line \E [ Pn M 1 eF dl
+# DLE Data Link Escape * ^P - - -
+# DMI Disable Manual Input \E \ - Fs -
+# DSR Device Status Report \E [ Ps n 0 - - (I)
+# DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
+# EA Erase in Area \E [ Ps O 0 eF - (J)
+# ECH Erase Character \E [ Pn X 1 eF ech
+# ED Erase in Display \E [ Ps J 0 eF ed (J)
+# EF Erase in Field \E [ Ps N 0 eF -
+# EL Erase in Line \E [ Ps K 0 eF el (J)
+# EM End of Medium * ^Y - - -
+# EMI Enable Manual Input \E b Fs -
+# ENQ Enquire ^E - - -
+# EOT End Of Transmission ^D - * -
+# EPA End of Protected Area \E W - - - (K)
+# ESA End of Selected Area \E G - - -
+# ESC Escape ^[ - - -
+# ETB End Transmission Block ^W - - -
+# ETX End of Text ^C - - -
+# FF Form Feed ^L - - -
+# FNK Function Key * \E [ Pn SPC W - - -
+# GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
+# FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
+# GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
+# GSS Graphic Size Selection \E [ Pn SPC C none FE -
+# HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
+# HPB Char Position Backward \E [ j 1 FE -
+# HPR Horz Position Relative \E [ Pn a 1 FE - (M)
+# HT Horizontal Tab * ^I - FE - (N)
+# HTJ Horz Tab w/Justification \E I - FE -
+# HTS Horizontal Tab Set \E H - FE hts
+# HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
+# ICH Insert Character \E [ Pn @ 1 eF ich
+# IDCS ID Device Control String \E [ SPC O - * -
+# IGS ID Graphic Subrepertoire \E [ SPC M - * -
+# IL Insert Line \E [ Pn L 1 eF il
+# IND Index \E D - FE -
+# INT Interrupt \E a - Fs -
+# JFY Justify \E [ Ps SPC F 0 FE -
+# IS1 Info Separator #1 * ^_ - * -
+# IS2 Info Separator #1 * ^^ - * -
+# IS3 Info Separator #1 * ^] - * -
+# IS4 Info Separator #1 * ^\ - * -
+# LF Line Feed ^J - - -
+# LS1R Locking Shift Right 1 * \E ~ - - -
+# LS2 Locking Shift 2 * \E n - - -
+# LS2R Locking Shift Right 2 * \E } - - -
+# LS3 Locking Shift 3 * \E o - - -
+# LS3R Locking Shift Right 3 * \E | - - -
+# MC Media Copy \E [ Ps i 0 - - (S)
+# MW Message Waiting \E U - - -
+# NAK Negative Acknowledge * ^U - * -
+# NBH No Break Here * \E C - - -
+# NEL Next Line \E E - FE nel (D)
+# NP Next Page \E [ Pn U 1 eF -
+# NUL Null * ^@ - - -
+# OSC Operating System Command \E ] - Delim -
+# PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
+# PFS Page Format Selection * \E Pn SPC J 0 - -
+# PLD Partial Line Down \E K - FE - (T)
+# PLU Partial Line Up \E L - FE - (U)
+# PM Privacy Message \E ^ - Delim -
+# PP Preceding Page \E [ Pn V 1 eF -
+# PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
+# PPB Page Position Backward * \E [ Pn SPC R 1 FE -
+# PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
+# PTX Parallel Texts * \E [ \ - - -
+# PU1 Private Use 1 \E Q - - -
+# PU2 Private Use 2 \E R - - -
+# QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
+# REP Repeat Char or Control \E [ Pn b 1 - rep
+# RI Reverse Index \E M - FE - (V)
+# RIS Reset to Initial State \E c - Fs -
+# RM Reset Mode * \E [ Ps l - - - (W)
+# SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
+# SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
+# SCI Single-Char Introducer \E Z - - -
+# SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
+# SCS Set Char. Spacing * \E [ Pn SPC g - - -
+# SD Scroll Down \E [ Pn T 1 eF rin
+# SDS Start Directed String * \E [ Pn ] 1 - -
+# SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
+# SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
+# SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
+# SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
+# SI Shift In ^O - - - (P)
+# SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
+# SL Scroll Left \E [ Pn SPC @ 1 eF -
+# SLH Set Line Home * \E [ Pn SPC U - - -
+# SLL Set Line Limit * \E [ Pn SPC V - - -
+# SLS Set Line Spacing * \E [ Pn SPC h - - -
+# SM Select Mode \E [ Ps h none - - (W)
+# SO Shift Out ^N - - - (Q)
+# SOH Start Of Heading * ^A - - -
+# SOS Start of String * \E X - - -
+# SPA Start of Protected Area \E V - - - (Z)
+# SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
+# SPH Set Page Home * \E [ Ps SPC G - - -
+# SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
+# SPL Set Page Limit * \E [ Ps SPC j - - -
+# SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
+# SR Scroll Right \E [ Pn SPC A 1 eF -
+# SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
+# SRS Start Reversed String * \E [ Ps [ 0 - -
+# SSA Start of Selected Area \E F - - -
+# SSU Select Size Unit * \E [ Pn SPC I 0 - -
+# SSW Set Space Width * \E [ Pn SPC [ none - -
+# SS2 Single Shift 2 (G2 set) \E N - Intro -
+# SS3 Single Shift 3 (G3 set) \E O - Intro -
+# ST String Terminator \E \ - Delim -
+# STAB Selective Tabulation * \E [ Pn SPC ^ - - -
+# STS Set Transmit State \E S - - -
+# STX Start pf Text * ^B - - -
+# SU Scroll Up \E [ Pn S 1 eF indn
+# SUB Substitute * ^Z - - -
+# SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
+# SYN Synchronous Idle * ^F - - -
+# TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
+# TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
+# TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
+# TBC Tab Clear \E [ Ps g 0 FE tbc
+# TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
+# TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
+# TSS Thin Space Specification \E [ Pn SC E none FE -
+# VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
+# VPB Line Position Backward * \E [ Pn k 1 FE -
+# VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
+# VT Vertical Tabulation * ^K - FE -
+# VTS Vertical Tabulation Set \E J - FE -
+#
+# ---------------------------------------------------------------------------
+#
+# Notes:
+#
+# Some control characters are listed in the ECMA-48 standard without
+# being assigned functions relevant to terminal control there (they
+# referred to other standards such as ISO 1745 or ECMA-35). They are listed
+# here anyway for completeness.
+#
+# (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
+#
+# (B) There seems to be some confusion abroad between CHA and HPA. Most
+# `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
+# the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
+# preserved the CHA abbreviation.
+#
+# (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
+# Occasionally (as on, for example, certain HP terminals) this has the HTJ
+# value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
+# CHT abbreviation.
+#
+# (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
+#
+# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
+# abbreviation.
+#
+# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
+# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
+# 5 = clear all char tabs, 6 = clear all line tabs.
+#
+# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
+# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
+# Position Absolute" but retains the HVP abbreviation.
+#
+# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
+# abbreviation.
+#
+# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
+# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
+# DSR, 6 = request CPR response.
+#
+# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
+# 1 = clear from beginning, 2 = clear.
+#
+# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
+#
+# (L) The GSM parameters are vertical and horizontal parameters to scale by.
+#
+# (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
+# use CUF for this function and ignore HPR. ECMA-48 calls this "Character
+# Position Relative" but retains the HPR abbreviation.
+#
+# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
+# abbreviation.
+#
+# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
+# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
+# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
+# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
+# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
+# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
+# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
+# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
+# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
+# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
+# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
+# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
+# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
+# 61-65 = variable highlights for ideograms.
+#
+# (P) SI is also called LSO, Locking Shift Zero.
+#
+# (Q) SI is also called LS1, Locking Shift One.
+#
+# (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
+# use CUD for this function and ignore VPR. ECMA calls it `Line Position
+# Absolute' but retains the VPA abbreviation.
+#
+# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
+# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
+# from secondary aux device, 4 = stop relay to primary aux device, 5 =
+# start relay to primary aux device, 6 = stop relay to secondary aux device,
+# 7 = start relay to secondary aux device.
+#
+# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
+# abbreviation.
+#
+# (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
+# abbreviation.
+#
+# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
+#
+# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
+# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
+# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
+# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
+# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
+# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
+# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
+# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
+# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
+# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
+# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
+# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
+# from ECMA-48's 5th edition but are listed here for reference.
+#
+# (X) Select Alternate Presentation Variants is used only for non-Latin
+# alphabets.
+#
+# (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
+#
+# (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
+# abbreviation.
+#
+# ---------------------------------------------------------------------------
+#
+# Abbreviations:
+#
+# Intro an Introducer of some kind of defined sequence; the normal 7-bit
+# X3.64 Control Sequence Introducer is the two characters "Escape ["
+#
+# Delim a Delimiter
+#
+# x/y identifies a character by position in the ASCII table (column/row)
+#
+# eF editor function (see explanation)
+#
+# FE format effector (see explanation)
+#
+# F is a Final character in
+# an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
+# a control sequence (F from 4/0 to 7/14)
+#
+# Gs is a graphic character appearing in strings (Gs ranges from
+# 2/0 to 7/14) in the ASCII table
+#
+# Ce is a control represented as a single bit combination in the C1 set
+# of controls in an 8-bit character set
+#
+# C0 the familiar set of 7-bit ASCII control characters
+#
+# C1 roughly, the set of control chars available only in 8-bit systems.
+# This is too complicated to explain fully here, so read Jim Fleming's
+# article in the February 1983 BYTE, especially pages 214 through 224.
+#
+# Fe is a Final character of a 2-character Escape sequence that has an
+# equivalent representation in an 8-bit environment as a Ce-type
+# (Fe ranges from 4/0 to 5/15)
+#
+# Fs is a Final character of a 2-character Escape sequence that is
+# standardized internationally with identical representation in 7-bit
+# and 8-bit environments and is independent of the currently
+# designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
+#
+# I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
+# ASCII table
+#
+# P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
+# table
+#
+# Pn is a numeric parameter in a control sequence, a string of zero or
+# more characters ranging from 3/0 to 3/9 in the ASCII table
+#
+# Ps is a variable number of selective parameters in a control sequence
+# with each selective parameter separated from the other by the code
+# 3/11 (which usually represents a semicolon); Ps ranges from
+# 3/0 to 3/9 and includes 3/11
+#
+# * Not relevant to terminal control, listed for completeness only.
+#
+# Format Effectors versus Editor Functions
+#
+# A format effector specifies how following output is to be displayed.
+# An editor function allows you to modify the display. Informally
+# format effectors may be destructive; format effectors should not be.
+#
+# For instance, a format effector that moves the "active position" (the
+# cursor or equivalent) one space to the left would be useful when you want to
+# create an overstrike, a compound character made of two standard characters
+# overlaid. Control-H, the Backspace character, is actually supposed to be a
+# format effector, so you can do this. But many systems use it in a
+# nonstandard fashion, as an editor function, deleting the character to the
+# left of the cursor and moving the cursor left. When Control-H is assumed to
+# be an editor function, you cannot predict whether its use will create an
+# overstrike unless you also know whether the output device is in an "insert
+# mode" or an "overwrite mode". When Control-H is used as a format effector,
+# its effect can always be predicted. The familiar characters carriage
+# return, linefeed, formfeed, etc., are defined as format effectors.
+#
+# NOTES ON THE DEC VT100 IMPLEMENTATION
+#
+# Control sequences implemented in the VT100 are as follows:
+#
+# CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
+# LNM, NEL, RI, RIS, RM, SGR, SM, TBC
+#
+# plus several private DEC commands.
+#
+# Erasing parts of the display (EL and ED) in the VT100 is performed thus:
+#
+# Erase from cursor to end of line Esc [ 0 K or Esc [ K
+# Erase from beginning of line to cursor Esc [ 1 K
+# Erase line containing cursor Esc [ 2 K
+# Erase from cursor to end of screen Esc [ 0 J or Esc [ J
+# Erase from beginning of screen to cursor Esc [ 1 J
+# Erase entire screen Esc [ 2 J
+#
+# Some brain-damaged terminal/emulators respond to Esc [ J as if it were
+# Esc [ 2 J, but this is wrong; the default is 0.
+#
+# The VT100 responds to receiving the DA (Device Attributes) control
+#
+# Esc [ c (or Esc [ 0 c)
+#
+# by transmitting the sequence
+#
+# Esc [ ? l ; Ps c
+#
+# where Ps is a character that describes installed options.
+#
+# The VT100's cursor location can be read with the DSR (Device Status
+# Report) control
+#
+# Esc [ 6 n
+#
+# The VT100 reports by transmitting the CPR sequence
+#
+# Esc [ Pl ; Pc R
+#
+# where Pl is the line number and Pc is the column number (in decimal).
+#
+# The specification for the DEC VT100 is document EK-VT100-UG-003.
+
+#### ANSI.SYS
+#
+# Here is a description of the color and attribute controls supported in the
+# the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
+# terminal emulators for Intel boxes obey these. They are a proper subset
+# of the ECMA-48 escapes.
+#
+# 0 all attributes off
+# 1 foreground bright
+# 4 underscore on
+# 5 blink on/background bright (not reliable with brown)
+# 7 reverse-video
+# 8 set blank (non-display)
+# 10 set primary font
+# 11 set first alternate font (on PCs, display ROM characters 1-31)
+# 12 set second alternate font (on PCs, display IBM high-half chars)
+#
+# Color attribute sets
+# 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
+# 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
+# Bright black becomes gray. Bright brown becomes yellow,
+# These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
+#
+# * If the 5 attribute is on and you set a background color (40-47) it is
+# supposed to enable bright background.
+#
+# * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
+# when you try to set a "bright brown" (yellow) background with attribute
+# 5 (you get a blinking yellow foreground instead). A few displays
+# (including the System V console) support an attribute 6 that undoes this
+# braindamage (this is required by iBCS2).
+#
+# * Some older versions of ANSI.SYS have a bug that causes thems to require
+# ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
+# compatible.)
+
+#### Intel Binary Compatibility Standard
+#
+# For comparison, here are the capabilities implied by the Intel Binary
+# Compatibility Standard for UNIX systems (Intel order number 468366-001).
+# These recommendations are optional. IBCS2 allows the leading escape to
+# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
+# the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
+# (as described in figure 9-3 of the standard). Those expressed in the ibcs2
+# terminfo entry are followed with the corresponding capability in parens:
+#
+# CSI <n>k disable (n=0) or enable (n=1) keyclick
+# CSI 2h lock keyboard
+# CSI 2i send screen as input
+# CSI 2l unlock keyboard
+# CSI 6m enable background color intensity
+# CSI <0-2>c reserved
+# CSI <0-59>m select graphic rendition
+# CSI <n>;<m>H (cup) cursor to line n and column m
+# CSI <n>;<m>f cursor to line n and column m
+# CSI <n>@ (ich) insert characters
+# CSI <n>A (cuu) cursor up n lines
+# CSI <n>B (cud) cursor down n lines
+# CSI <n>C (cuu) cursor right n characters
+# CSI <n>D (cud) cursor left n characters
+# CSI <n>E cursor down n lines and in first column
+# CSI <n>F cursor up n lines and in first column
+# CSI <n>G (hpa) position cursor at column n-1
+# CSI <n>J (ed) erase in display
+# CSI <n>K (el) erase in line
+# CSI <n>L (il) insert line(s)
+# CSI <n>P (dch) delete characters
+# CSI <n>S (indn) scroll up n lines
+# CSI <n>T (rin) scroll down n lines
+# CSI <n>X (ech) erase characters
+# CSI <n>Z (cbt) back up n tab stops
+# CSI <n>` cursor to column n on line
+# CSI <n>a (cuu) cursor right n characters
+# CSI <n>d (vpa) cursor to line n
+# CSI <n>e cursor down n lines and in first column
+# CSI <n>g (cbt) clear all tabs
+# CSI <n>z make virtual terminal n active
+# CSI ?7h (smam) turn automargin on
+# CSI ?7l (rmam) turn automargin off
+# CSI s save cursor position
+# CSI u restore cursor position to saved value
+# CSI =<c>A set overscan color
+# CSI =<c>F set normal foreground color
+# CSI =<c>G set normal background color
+# CSI =<c>H set reverse foreground color
+# CSI =<c>I set reverse foreground color
+# CSI =<c>J set graphic foreground color
+# CSI =<c>K set graphic foreground color
+# CSI =<n>g (dispc) display n from alternate graphics character set
+# CSI =<p>;<d>B set bell parameters
+# CSI =<s>;<e>C set cursor parameters
+# CSI =<x>D enable/disable intensity of background color
+# CSI =<x>E set/clear blink vs. bold background
+# CSI 7 (sc) (sc) save cursor position
+# CSI 8 (rc) (rc) restore cursor position to saved value
+# CSI H (hts) (hts) set tab stop
+# CSI Q<n><string> define function key string
+# (string must begin and end with delimiter char)
+# CSI c (clear) clear screen
+#
+# The lack of any specification for attributes in SGR (among other things)
+# makes this a wretchedly weak standard. The table above is literally
+# everything iBSC2 has to say about terminal escape sequences; there is
+# no further discussion of their meaning or how to set the parameters
+# in these sequences at all.
+#
+
+######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
+#
+# The historical termcap file entries were written primarily in 4.4BSD termcap.
+# The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
+# with the extension names chosen for compatibility with the termcap names
+# assigned in System V terminfo. There are some variant extension sets out
+# there. We try to describe them here.
+#
+# XENIX extensions:
+#
+# The XENIX extensions include a set of function-key capabilities as follows:
+#
+# code XENIX variable name terminfo name name clashes?
+# ---- ------------------- ------------- -----------------------
+# CL key_char_left
+# CR key_char_right
+# CW key_change_window create_window
+# EN key_end kend
+# HM key_home khome
+# HP ??
+# LD key_delete_line kdl1
+# LF key_linefeed label_off
+# NU key_next_unlocked_cell
+# PD key_page_down knp
+# PL ??
+# PN start_print mc5
+# PR ??
+# PS stop_print mc4
+# PU key_page_up kpp pulse
+# RC key_recalc remove_clock
+# RF key_toggle_ref req_for_input
+# RT key_return kent
+# UP key_up_arrow kcuu1 parm_up_cursor
+# WL key_word_left
+# WR key_word_right
+#
+# The XENIX extensions also include the following character-set and highlight
+# capabilities:
+#
+# XENIX terminfo function
+# ----- -------- ------------------------------
+# GS smacs start alternate character set
+# GE rmacs end alternate character set
+# GG :as:/:ae: glitch (analogous to :sg:/:ug:)
+# bo blink begin blink (not used in /etc/termcap)
+# be end blink (not used in /etc/termcap)
+# bb blink glitch (not used in /etc/termcap)
+# it dim begin dim (not used in /etc/termcap)
+# ie end dim (not used in /etc/termcap)
+# ig dim glitch (not used in /etc/termcap)
+#
+# Finally, XENIX also used the following forms-drawing capabilities:
+#
+# single double type ASCII approximation
+# ------ ------ ------------- -------------------
+# GV Gv vertical line |
+# GH Gv horizontal line - _
+# G1 G5 top right corner _ |
+# G2 G6 top left corner |
+# G3 G7 bottom left corner |_
+# G4 G8 bottom right corner _|
+# GD Gd down-tick character T
+# GL Gl left-tick character -|
+# GR Gr right-tick character |-
+# GC Gc middle intersection -|-
+# GU Gu up-tick character _|_
+#
+# These were invented to take advantage of the IBM PC ROM character set. One
+# can compose an acsc string from the single-width characters as follows
+# "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
+# When translating a termcap file, ncurses tic will do this automatically.
+# The double forms characters don't fit the SVr4 terminfo model.
+#
+# AT&T Extensions:
+#
+# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
+# nonstandard capabilities. Its signature is the KM capability, used to name
+# some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
+# set. Comments in the original, and a little cross-checking with other AT&T
+# documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
+# (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
+# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
+# cursor invisible), and CV=:ve: (make cursor normal).
+#
+# HP Extensions
+#
+# The HP library (as of mid-1995, their term.h file version 70.1) appears to
+# have the System V capabilities up to SVr1 level. After that, it supports
+# two nonstandard caps meml and memu corresponding to the old termcap :ml:,
+# :mu: capabilities. After that, it supports caps plab_norm, label_on,
+# label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
+# HP binary format incompatible with SVr4's.
+#
+# IBM Extensions
+#
+# There is a set of nonstandard terminfos used by IBM's AIX operating system.
+# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
+# capabilities following prtr_non with the following special capabilties:
+# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
+# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
+# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
+# rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
+# kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
+# renamed (to kcbt and kslt). The places in the box[12] capabilities
+# correspond to acsc chars, here is the mapping:
+#
+# box1[0] = ACS_ULCORNER
+# box1[1] = ACS_HLINE
+# box1[2] = ACS_URCORNER
+# box1[3] = ACS_VLINE
+# box1[4] = ACS_LRCORNER
+# box1[5] = ACS_LLCORNER
+# box1[6] = ACS_TTEE
+# box1[7] = ACS_RTEE
+# box1[8] = ACS_BTEE
+# box1[9] = ACS_LTEE
+# box1[10] = ACS_PLUS
+#
+# The box2 characters are the double-line versions of these forms graphics.
+# The AIX binary terminfo format is incompatible with SVr4's.
+#
+# Iris console extensions:
+#
+# HS is half-intensity start; HE is half-intensity end
+# CT is color terminal type (for Curses & rogue)
+# CP is color change escape sequence
+# CZ are color names (for Curses & rogue)
+#
+# The ncurses tic utility recognizes HS as an alias for mh <dim>.
+#
+# TC Extensions:
+#
+# There is a set of extended termcaps associated with something
+# called the "Terminal Control" or TC package created by MainStream Systems,
+# Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
+# CF for civis and CO for cvvis. Finally, they define a boolean :ct:
+# that flags color terminals.
+#
+######## CHANGE HISTORY
+#
+# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
+# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
+# project.
+#
+# This file contains all the capability information present in John Kunze's
+# last version of the termcap master file, except as noted in the change
+# comments at end of file. Some information about very ancient obsolete
+# capabilities has been moved to comments. Some all-numeric names of older
+# terminals have been retired.
+#
+# I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
+# capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
+# used by BSD curses.
+#
+# The 9.1.0 version of this file was translated from my lightly-edited copy of
+# 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
+# the purpose. Unless the ncurses tic implementation and the Lisp code were
+# making perfectly synchronized mistakes which I then failed to catch by
+# eyeball, the translation was correct and perfectly information-preserving.
+#
+# Major version number bumps correspond to major version changes in ncurses.
+#
+# Here is a log of the changes since then:
+#
+# 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
+# * First terminfo master translated from 8.3.
+# 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
+# * Replaced Wyse entries with updated entries supplied by vendor.
+#
+# 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
+# * Added contact & status info from G. Clark Brown <clark@sssi.com>.
+# 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
+# * Better XENIX keycap translation. Describe TC termcaps.
+# * Contact and history info supplied by Qume.
+# 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
+# * Raided the Shuford FTP site for recent termcaps/terminfos.
+# * Added information on X3.64 and VT100 standard escape sequences.
+# 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
+# * Added a correct X11R6 xterm entry.
+# * Fixed terminfo translations of padding.
+# 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
+# * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
+# * Added u6/u7/u8/u9 capabilities.
+# * Added PCVT entry.
+# 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
+# * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
+# to use reverse-video standout so Emacs will look right.
+# * Added el1 capability to ansi.
+# * Added smacs/rmacs to ansi.sys.
+#
+# 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
+# * New mt70 entry.
+# * Added COPYRIGHTS AND OTHER DELUSIONS.
+# * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
+# smartvid & smarterm, ampex 175 & 219 & 232,
+# env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
+# ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
+# screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
+# adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
+# * Replaced the Perkin-Elmer entries with vendor's official ones.
+# * Restored the old minimal-ansi entry, luna needs it.
+# * Fixed some incorrect ip and proportional-padding translations.
+# 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
+# * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
+# * Make the xterm entry 65 lines again; create xterm25 and xterm24
+# to force a particular height.
+# * Added beehive4 and reorganized other Harris entries.
+# 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
+# * Merged in DEC's official entries for its terminals. The only old
+# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
+# * Replaced the translated BBN Bitgraph entries with purpose-built
+# ones from AT&T's SVr3.
+# * Replaced the AT&T entries with AT&T's official terminfos.
+# * Added teleray 16, vc415, cops10.
+# * Merged in many individual capabilities from SCO terminfo files.
+# 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
+# * Typo fixes.
+# * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
+# 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
+# * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
+# pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
+# simterm, citoh and variants.
+# * Replaced sol entry with sol1 and sol2.
+# * Replaced Qume QVT and Freedom-series entries with purpose-built
+# terminfo entries.
+# * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
+# and dg200 entries using caps from from SCO.
+# * Added the usual set of function-key mappings to ANSI entry.
+# * Corrected xterm's function-key capabilities.
+# 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
+# * Fix in xterm entry, cub and cud are not reliable under X11R6.
+# 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
+# * Fix in xterm entry, get the arrow keys right.
+# * Change some \0 escapes to \200.
+# 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
+# * Added apple (Videx card), adm1a, oadm31.
+# * Fixed malformed ampex csr.
+# * Fixed act4, cyb110; they had old-style prefix padding left in.
+# * Changed mandatory to advisory padding in many entries.
+# * Replaced HP entries up to hpsub with purpose-built ones.
+# * Blank rmir/smir/rmdc/smdc capabilities removed.
+# * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
+# 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
+# * Replaced the Ann Arbor entries with SCO's, the init strings are
+# more efficient (but the entries otherwise identical).
+# * Added dg211 from Shuford archive.
+# * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
+# adm42-nl, pc52, gs6300, xerox820, uts30.
+# * Pull SCO's padding into vi200 entry.
+# * Improved capabilities for tvi4107 and other Televideo and Viewpoint
+# entries merged in from SCO's descriptions.
+# * Fixed old-style prefix padding on zen50, h1500.
+# * Moved old superbee entry to superbee-xsb, pulled in new superbee
+# entry from SCO's description.
+# * Reorganized the special entries.
+# * Added lm#0 to cbunix and virtual entries.
+#
+# 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
+# * Restored cdc456tst.
+# * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
+# * Added megatek, beacon, microkit.
+# * Freeze for ncurses-1.9 release.
+# 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
+# * Added historical data for TAB.
+# * Comment fixes from David MacKenzie.
+# * Added the new BSDI pc3 entry.
+# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
+# * A change in the tic -C logic now ensures that all entries in
+# the termcap translation will fit in < 1024 bytes.
+# * Added `bobcat' and `gator' HP consoles and the Nu machine entries
+# from GNU termcap file. This merges in all their local information.
+# 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
+# * Changed tic -C logic to dump all capabilities used by GNU termcap.
+# * Added warnings about entries with long translations (restoring
+# all the GNU termcaps pushes a few over the edge).
+# 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
+# * Yet another tic change, and a couple of entry tweaks, to reduce the
+# number of long (> 1024) termcap translations back to 0.
+#
+# 9.6.0 (Mon May 1 10:35:54 EDT 1995)
+# * Added kf13-kf20 to Linux entry.
+# * Regularize Prime terminal names.
+# * Historical data on Synertek.
+# * Freeze for ncurses-1.9.1.
+# 9.6.1 (Sat May 6 02:00:52 EDT 1995):
+# * Added true xterm-color entry, renamed djm's pseudo-color entry.
+# * Eliminate whitespace in short name fields, this tanks some scripts.
+# * Name field changes to shorten some long entries.
+# * Termcap translation now automatically generates empty rmir/smir
+# when ich1/ich is present (copes with an ancient vi bug).
+# * Added `screen' entries from FSF's screen-3.6.2.
+# * Added linux-nic and xterm-nic entries.
+# 9.6.2 (Sat May 6 17:00:55 EDT 1995):
+# * Change linux entry to use smacs=\E[11m and have an explicit acsc,
+# eliminating some special-case code in ncurses.
+#
+# 9.7.0 (Tue May 9 18:03:12 EDT 1995):
+# * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
+# that captures everything unique from it.
+# * Added reorder script generator.
+# * Freeze for ncurses 1.9.2 release.
+# 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
+# * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
+# * Added Olaf Siebert's corrections for adm12.
+# * ansi-pc-color now includes the colors and pairs caps, so that
+# entries which use it will inherit them automatically.
+# * The linux entry can now recognize the center (keypad 5) key.
+# * Removed some junk that found its way into Linux acsc.
+#
+# 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
+# * Add 50% cut mark as a desperate hack to reduce tic's core usage.
+# * xterm doesn't try to use application keypad mode any more.
+# * Freeze for ncurses-1.9.3 release.
+# 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
+# * Added corrected sun entry from vendor.
+# * Added csr capability to linux entry.
+# * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
+# * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
+# * Some commented-out caps in long entries come back in, my code
+# for computing string-table lengths had a bug in it.
+# * pcansi series modified to fit comm-program reality better.
+# 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
+# * BSD/OS actually ships the ibmpc3 bold entry as its console.
+# * Correct some bad aliases in the pcansi series
+# * Added entry for QNX console.
+# * Clean up duplicate long names for use with 4.4 library.
+# * Change vt100 standout to be normal reverse vide, not bright reverse;
+# this makes the Emacs status line look better.
+# 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
+# * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
+# * Minor surgery, mostly on name strings, to shorten termcap version.
+#
+# 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
+# * Added dec-vt100 for use with the EWAN emulator.
+# * Added kmous to xterm for use with xterm's mouse-tracking facility.
+# * Freeze for 1.9.5 alpha release.
+# 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
+# * Changed xterm lines to 24, the X11R6 default.
+# 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
+# * Added 7 newly discovered, undocumented acsc characters to linux
+# entry (the pryz{|} characters).
+# * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
+# * Correct two typos in the xterm entries introduced in 9.9.1.
+# * I finally figured out how to translate ko capabilities. Done.
+# * Added tvi921 entries from Tim Theisen.
+# * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
+# * Removed mystery tec entry, it was neither interesting nor useful.
+# * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
+# vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
+# trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
+# by making them relative to use capabilities
+# * Added cuf1=^L to tvi925 from deleted variant tvi925a.
+# * fixed cup in adm22 entry and parametrized strings in vt320-k3.
+# * added it#8 to entries that used to have :pt: -- tvi912, vi200,
+# ampex80,
+# * Translate all home=\E[;H capabilities to home=\E[H, they're
+# equivalent.
+# * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
+# vt100 and ANSI-like terminals.
+# 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
+# * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
+# does this now, too.
+# * fviewpoint is gone, it duplicated screwpoint.
+# * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
+# ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
+# versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
+# The UW vi50 replaces the old one, which becomes vi50adm,
+# * No more embedded commas in name fields.
+#
+# 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
+# * XENIX forms characters in fos, trs16, scoansi become acsc strings,
+# * Introduced klone+* entries for describing Intel-console behavior.
+# * Linux kbs is default-mapped to delete for some brain-dead reason.
+# * -nsl -> -ns. The -pp syntax is obsolete.
+# * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
+# * Make xterm entry do application-keypad mode again. I got complaints
+# that it was messing up someone's 3270 emulator.
+# * Added some longname fields in order to avoid warning messages from
+# older tic implementations.
+# * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
+# it! (This gives us pi, greater than, less than, and a few more.)
+# * Freeze for ncurses-1.9.6 release.
+# 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
+# * Add xon to a number of console entries, they're memory-mapped and
+# don't need padding.
+# * Correct the use dependencies in the ansi series.
+# * Hand-translate more XENIX capabilities.
+# * Added hpterm entry for HP's X terminal emulator.
+# * Added aixterm entries.
+# * Shortened four names so everything fits in 14 chars.
+#
+# 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
+# * Added ibcs2 entry and info on iBCS2 standard.
+# * Corrected hpa/vpa in linux entry. They still fail the worm test.
+# * We can handle the HP meml/memu capability now.
+# * Added smacs to klone entries, just as documentation.
+# * Carrected ansi.sys and cit-500 entries.
+# * Added z39, vt320-k311, v220c, and avatar entries.
+# * Make pcansi use the ansi.sys invis capability.
+# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
+# tvi925, tvi950, dt80, ncr7900i, h19.
+# * X3.64 has been withdrawn, change some references.
+# * Removed function keys from ansi-m entry.
+# * Corrected ansi.sys entry.
+# * Freeze for ncurses-1.9.7 release.
+# 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
+# * Added rmam/smam capabilities to many entries based on init strings.
+# * Added correct hpa/vpa to linux.
+# * Reduced several entries relative to vt52.
+# 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
+# * Exiled some utterly unidentifiable custom and homebrew types to the
+# UFO file; also, obsolete small-screen hardware; also, entries which
+# look flat-out incorrect, garbled, or redundant. These include the
+# following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
+# tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
+# apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
+# fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
+# yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
+# vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
+# trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
+# att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
+# tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
+# c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
+# regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
+# vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
+# vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
+# * Corrected pcvt25h as suggested by Brian C. Grayson
+# <bgrayson@pine.ece.utexas.edu>.
+# 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
+# * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
+# * Added kent=\EOM to xterm entry.
+#
+# 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
+# * Corrected gigi entry.
+# * Restored cuf/cud1 to xterm, their apparent bugginess was due to
+# bad hpa/vpa capabilities.
+# * Corrected flash strings to have a uniform delay of .2 sec. No
+# more speed-dependent NUL-padding!
+# * terminfo capabilities in comments bracketed with <>.
+# 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
+# * Replaced pcvt with the 3.31 pcvt entries.
+# * Freeze for 1.9.7a.
+# 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
+# * Added emu entry from the X11R6 contrib tape sources.
+#
+# 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
+# * Improved iris-ansi and sun entries.
+# * More flash string improvements.
+# * Corrected wy160 & wy160 as suggested by Robert Dunn
+# * Added dim to at386.
+# * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
+# he's ready to start using the termcap generated from this one.
+# * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
+# ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
+# * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
+# att610, att620, att630,
+# * Changed hazeltine name prefix from h to hz.
+# * Sent t500 to the UFI file.
+# * I think we've sucked all the juice out of BSDI's termcap file now.
+# * Freeze for ncurses 1.9.8 release
+# 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
+# * Unfreeze, linux kbs needed to be fixed.
+# * Tim Theisen pinned down a bug in the DMD firmware.
+# 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
+# * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
+# (The broken ones had been shadowed by sgr.)
+# 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
+# * Added documentation on ECMA-48 standard.
+# * New Amiga entry.
+# 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
+# * More ECMA-48 stuff
+# * Corrected typo in minix entry, added pc-minix.
+# * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
+# * Added rxvt entry.
+# * Added 1.3.x color-change capabilities to linux entry.
+# 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
+# * Corrected rxvt entry khome/kend.
+# * Corrected linux color change capabilities.
+# * NeXT entries from Dave Wetzel.
+# * Cleaned up if and rf file names (all in /usr/share now).
+# * Changed linux op capability to avoid screwing up a background color
+# pair set by setterm.
+# 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
+# * Added xterm-sun.
+# 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
+# * Added visa50.
+#
+# 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
+# * Another sweep through the Shuford archive looking for new info.
+# * Added dg100 alias to dg6053 based on a comp.terminals posting.
+# * Added st52 from Per Persson.
+# * Added eterm from the GNU Emacs 19.30 distribution.
+# * Freeze for 1.9.9.
+# 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
+# * FreeBSD console entries from Andrew Chernov.
+# * Removed duplicate Atari st52 name.
+# 9.13.2 (Tue May 7 16:10:06 EDT 1996)
+# * xterm doesn't actually have ACS_BLOCK.
+# * Change klone+color setf/setb to simpler forms that can be
+# translated into termcap.
+# * Added xterm1.
+# * Removed mechanically-generated junk capabilities from cons* entries.
+# * Added color support to bsdos.
+# 9.13.3 (Thu May 9 10:35:51 EDT 1996):
+# * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
+# * Created ecma+color, linux can use it. Also added ech to linux.
+# * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
+# * Add descriptions to FreeBSD console entries. Also shorten
+# some aliases to <= 14 chars for portability.
+# * Added x68k console
+# * Added OTbs to several VT-series entries.
+# 9.13.4 (Wed May 22 10:54:09 EDT 1996):
+# * screen entry update for 3.7.1 from Michael Alan Dorman.
+# 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
+# * kterm correction due to Kenji Rikitake.
+# * ACS correction in vt320-kll due to Phillippe De Muyter.
+# 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
+# * Sun console entry correction from J.T. Conklin.
+# * Changed all DEC VT300 and up terminals to use VT300 tab set
+# 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
+# * Added smul to linux entry (we never noticed it was missing
+# because of sgr!).
+# * Added rmln to hp+labels (deduced from other HP entries).
+# * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
+# pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
+# * Corrected vt220 acsc.
+# * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
+# this corresponds to reality and helps prevent some tic warnings.
+# * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
+# hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
+# adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
+# qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
+# wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
+# adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
+# f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
+# owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
+# lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
+# dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
+# ifmr, v3220, wy100q, tandem653, ibmaed.
+# * Added DWK terminal description.
+# 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
+# * Many entries now have highlights inherited from adm+sgr.
+# * xterm entry now corresponds to XFree86 3.1.2E, with color.
+# * xtitle and xtitle-twm enable access to the X status line.
+# * Added linux-1.3.6 color palette caps in conventional format.
+# * Added adm1178 terminal.
+# * Move fos and apollo terminals to obsolete category.
+# * Aha! The BRL terminals file told us what the Iris extensions mean.
+# * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
+# commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
+# cit500, adm11.
+# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
+# * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
+# aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
+# * Corrected, from BRL termcap file: vi50.
+# * Better rxvt entry & corrected xterm entries from Thomas Dickey.
+# 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
+# * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
+# att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
+# (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
+# tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
+# apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
+# * Paired-attribute fixes to various terminals.
+# * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
+# * xterm entry corrections from Thomas Dickey.
+# 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
+# * Added t916 entry, translated from a termcap in SCO's support area.
+# * New qnx entry from Michael Hunter.
+# 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
+# * Added hpex2 from Ville Sulko.
+# * Fixed a bug that ran the qnx and pcvtXX together.
+# 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
+# * Added dtterm entry from Solaris CDE.
+# 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
+# * corrected pairs#8 typo in dtterm entry.
+# * added tvi9065.
+# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
+# * updated xterm entry to cover 3.1.2E's new features.
+# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
+# * Added new minix entry
+# * Removed aliases of the form ^[0-9]* for obsolete terminals.
+# * Commented out linux-old, nobody's using pre-1.2 kernels now.
+# 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
+# * Added Prism entries and kt7ix.
+# * Caution notes about EWAN and tabset files.
+# * Changed /usr/lib/tabset -> /usr/share/tabset.
+# * Added acsc/rmacs/smacs to vt52.
+# 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
+# * Merged in Thomas Dickey's reorganization of the xterm entries;
+# added technical corrections to avoid warning messages.
+# 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
+# * Added rmso=\E[27m in Linux entry.
+# * Added koi8-r support for Linux console.
+# * Replace xterm entries with canonical ones from XFree86 3.2.
+# 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
+# * Added color_xterm from Jacob Mandelson
+# 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
+# * Back off the xterm entry to use r6 as a base.
+# 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
+# * Added dec-vt220 at Adrian Garside's request.
+#
+#-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
+#
+# 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
+# * Minor corrections to xterm entries.
+# * Replaced EWAN telnet entry.
+# * Dropped the reorder script generator. It was a fossil.
+# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
+# * Replaced minitel-2 entry.
+# * Added MGR, ansi-nt.
+# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
+# * Thorsten Lockert added termcap `bs' to a lot of types, working from
+# the 4.4BSD Lite2 file.
+#
+# 10.1.1 (Sat May 3 21:41:27 EDT 1997):
+# * Use setaf/setab consistently with SVr4.
+# * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
+# 10.1.2 (Sat May 24 21:10:57 EDT 1997)
+# * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
+# * add xterm-16color, for XFree86 3.3
+# 10.1.3 (Sat May 31 12:21:05 EDT 1997)
+# * correct typo in emu
+# * correct typo in vt102-w (Robert Wuest)
+# * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
+# 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
+# * remove ech capability from rxvt (it does the wrong thing)
+# 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
+# * remove spurious newlines from several entries (hp+color, wy50,
+# wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
+# gs6300)
+# 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
+# * correct rmso capability of wy50-mc
+# 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
+# * add cbt to xterm-xf86-v32
+# * disentangle some entries from 'xterm', preferring xterm-r6 in case
+# 'xterm' is derived from xterm-xf86-v32, which implements ech and
+# other capabilities not in xterm-r6.
+# * remove alternate character set from kterm entry.
+# 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
+# * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
+# 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
+# * add xterm-8bit entry.
+# 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
+# * repair several places where early version of tic replaced \, with \\\,
+# * make acsc entries canonical form (sorted, uniq).
+# * modify acsc entries for linux, linux-koi8
+# * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
+# * add color, mouse support to kterm.
+# 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
+# * correct wy120 smxon/tbc capabilities which were stuck together.
+# 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
+# * add entry for xterm-xf86-v39t
+# 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
+# * add u8,u9 to sun-il description
+# 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
+# * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
+# version.
+# * add hds200 description (Walter Skorski)
+# * add EMX 0.9b descriptions
+# * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
+# * rename xhpterm back to hpterm.
+# 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
+# * change initc in linux-c-nc to use 0..1000 range.
+# 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
+# * remove hpa/vpa from rxvt, which implements them incorrectly.
+# * add sgr0 for rxvt.
+# * remove bogus smacs/rmacs from EMX descriptions.
+# 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
+# * revised entry for att7300
+# 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
+# * use \0 rather than \200.
+# * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
+# 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
+# * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
+# * rename xterm-xf86-v39t to xterm-xf86-v40
+# * remove bold/underline from sun console entries since they're not
+# implemented.
+# 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
+# * add beterm entry (Fred Fish)
+# * add irix-color/xwsh entry.
+# * turn ncv off for linux.
+# 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
+# * set ncv for FreeBSD console (treat colors with reverse specially).
+# * remove sgr string from qnx based on report by Xiaodan Tang
+# 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
+# * remove spurious commas from descriptions
+# * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
+# 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
+# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
+# apparently based on cp-866).
+#
+#-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
+#
+# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
+# * Replaced minitel-2 entry.
+# * Added MGR, ansi-nt.
+# * Minor corrections to xterm entries.
+# * Replaced EWAN telnet entry.
+# * Dropped the reorder script generator. It was a fossil.
+# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
+# * Thorsten Lockert added termcap `bs' to a lot of types, working from
+# the 4.4BSD Lite2 file.
+# 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
+# * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
+# * Updated iris-ansi; corrected vt102-w.
+# * Switch base xterm entry to 3.3 level.
+# 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
+# * Added basic4.
+# * Removed rmir/smir from tv92B.
+#
+# 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
+# * add hds200 description (Walter Skorski)
+# * add beterm entry (Fred Fish)
+# * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
+# iris-color entries.
+# * add emx entries.
+# * Replaced unixpc entry with Benjamin Sittler's corrected version.
+# * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
+# versions.
+# * remove sgr string from qnx based on report by Xiaodan Tang
+# * Added u8/u9, removed rmul/smul from sun-il.
+# * 4.2 tic displays \0 rather than \200.
+# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
+# apparently based on cp-866).
+# * Merged in Pavel Roskin's acsc for linux-koi8
+# * Corrected some erroneous \\'s to \.
+# * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
+# * II -> ii in pcvtXX, screen, xterm.
+# * Removed \n chars following ANSI escapes in sgr & friends.
+# * Updated Wyse entries.
+# * h19 corrections from Tim Pierce.
+# * Noted that the dm2500 has both ich and smir.
+# * added pccons for the Alpha under OSF/1.
+# * Added Sony NEWS workstation entries and cit101e-rv.
+# * Reverted `amiga'; to Kent Polk's version, as I'm told
+# the Verkuil entry messes up with Amiga Telnet.
+# 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
+# * Corrected attributions in 10.2.0 release notes.
+# * Scanned the Shuford archive for new terminfos and information.
+# * Removed sgr from qnx entry (Thomas Dickey).
+# * Added entries for ICL and Kokusai Data Systems terminals.
+# * Incorporated NCR terminfos from the Boundless Technology FTP site.
+# * Incorporated att700 from the Boundless Technology FTP site.
+# * Miscellaneous contact-address and Web-page updates.
+#
+#-(changelog-beginning-ncurses-4.2)---------------------------------------------
+#
+# 1998/5/9
+# * add nxterm and xterm-color terminfo description (request by Cristian
+# Gafton <gafton@redhat.com>).
+# * modify rxvt terminfo description to clear alternate screen before
+# switching back to normal screen, for compatibility with applications
+# which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
+# * modify linux terminfo description to reset color palette (reported
+# by Telford Tendys <telford@eng.uts.edu.au>).
+#
+# 1998/7/4
+# * merge changes from current XFree86 xterm terminfo descriptions.
+#
+# 1998/7/25
+# * Added minitel1 entries from Alexander Montaron.
+# * Added qnxt2 from Federico Bianchi.
+# * Added arm100 terminfo entries from Dave Millen.
+#
+# 1998/8/6
+# * Added ncsa telnet entries from Francesco Potorti
+#
+# 1998/8/15
+# * modify ncsa telnet entry to reflect color, other capabilities based on
+# examination of the source code - T.Dickey.
+#
+# 1998/8/22
+# * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
+#
+# 1998/8/29
+# * Added Francesco Potorti's tuned Wyse 99 entries.
+# * dtterm enacs correction from Alexander V. Lukyanov.
+# * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
+# * correct a typo in icl6404 entry.
+# * add xtermm and xtermc
+#
+# 1998/9/26
+# * format most %'char' sequences to %{number}
+# * adapt IBM AIX 3.2.5 terminfo - T.Dickey
+# * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
+#
+# 1998/10/10
+# * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
+# * correct initialization string in xterm-r5, add misc other features
+# to correspond with xterm patch 84 - TD
+#
+# 1998/12/19
+# * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
+# * add Mathew Vernon's mach console entries
+# * corrections for ncsa function-keys (report by Larry Virden)
+#
+# 1998/12/19
+# * change linux to use ncv#2, since underline does not work with color - TD
+#
+# 1999/1/9
+# * add kbt to iris-ansi, document other shift/control functionkeys - TD
+# * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
+# application modes, change kent to use the correct keypad code - TD
+#
+# 1999/1/10
+# * add entry for Tera Term - TD
+#
+# 1999/1/23
+# * minor improvements for teraterm entry - TD
+# * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
+# and bsdos-bold to bsdos-pc (Jeffrey C Honig)
+#
+# 1999/2/20
+# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
+# xterm and ncsa entries by removing the unneeded ones. Note that
+# some entries will return kend & khome versus kslt and kfnd, for
+# PC-style keyboards versus strict vt220 compatiblity - TD
+#
+# 1999/3/13
+# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
+# tables - TD
+# * add 'crt' entry - TD
+# * correct typos in 'linux-c' entry - TD
+#
+# 1999/3/14
+# * update entries for BSD/OS console to use klone+sgr and klone+color
+# (Jeffrey C Honig)
+#
+# 1999/3/27
+# * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
+#
+# 1999/4/10
+# * add linux-lat, from RedHat patches to ncurses 4.2
+#
+# 1999/4/17
+# * add complete set of default function-key definitions for scoansi - TD.
+#
+# 1999/7/3
+# * add cnorm, cvvis for Linux 2.2 kernels
+#
+# 1999/7/24
+# * add kmous to xterm-r5 -TD
+# * correct entries xterm+sl and xterm+sl-twm, which were missing the
+# parent "use" clause -TD
+#
+# 1999/7/31
+# * corrected cnorm, added el1 in 'screen' description -TD
+#
+# 1999/8/14
+# * add ms-vt100 -TD
+#
+# 1999/8/21
+# * corrections to beterm entry -TD
+#
+# 1999/8/28
+# * add cygwin entry -TD
+#
+# 1999/9/4
+# * minor corrections for beterm entry -TD
+#
+# 1999/9/18
+# * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
+#
+# 1999/9/25
+# * add amiga-8bit entry
+# * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
+# rcons-color, based on
+# ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
+# * add alias for iris-ansi-net
+#
+# 1999/10/2
+# * corrected scoansi entry's acsc, some function keys, add color -TD
+#
+# 1999/10/23
+# * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
+# * reorder ncsa entries to make ncsa-vt220 use the alternate function
+# key mapping, leaving Potorti's entries more like he named them -TD
+# * remove enter/exit am-mode from cygwin -TD
+#
+# 1999/10/30
+# * correct typos in several entries (missing '[' from CSI):
+# mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
+# strings for avt-ns -TD
+# * add 'dim' to ncv mask for linux (report by Klaus Weide).
+#
+# 1999/11/27
+# * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
+# * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
+# * add xterm-88color and xterm-256color -TD
+#
+# 1999/12/4
+# * add "obsolete" termcap strings -TD
+# * add kvt and gnome entries -TD
+#
+# 1999/12/11
+# * correct cup string for regent100 -TD
+#
+# 2000/1/1
+# * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
+# * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
+# * change OTrs capabilities to rs2 -TD
+# * add obsolete and extended capabilities to 'screen' -TD
+#
+# 2000/1/5
+# * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
+# with kf10 -TD
+# * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
+# and adding kcbt -TD
+#
+# 2000/1/12
+# * remove incorrect khome/kend from xterm-xf86-v333, which was based on
+# nonstandard resource settings -TD
+#
+# 2000/2/26
+# * minor fixes for xterm-*, based on Debian #58530 -TD
+#
+# 2000/3/4
+# * add several terminal types from esr's "11.0", as well as comments.
+# bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
+# vt220-8bit, vt220-old, wy85-8bit
+#
+# 2000/3/18
+# * add several terminal types from esr's "11.0.1" (ansi-*).
+# * update OTxx capabilities for changes on 2000/3/4.
+# * revert part of vt220 change (request by Todd C Miller for OpenBSD)
+#
+# 2000/3/26
+# * move screen's AX extension to ecma+color, modify several entries to
+# use that, adjusting ncv as needed -TD
+#
+# 2000/4/8
+# * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
+# * correct spelling error in entry name: bq300-rv was given as bg300-rv
+# in esr's version.
+#
+# 2000/4/15
+# * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
+# * correct color definition for ibm3164, make minor changes to other
+# IBM terminal definitions based on recent terminfo descriptions -TD
+#
+# 2000/4/22
+# * add mgterm, from NetBSD -TD
+# * add alias sun-cgsix for sun-ss5 as per NetBSD
+# * change cons25w to use rs2 for reset rather than rs1 -TD
+# * add rc/sc to aixterm based on manpage -TD
+#
+# 2000/5/13
+# * remove ncv from xterm-16color, xterm-256color
+#
+# 2000/6/10
+# * add kmous capability to linux to use Joerg Schoen's gpm patch.
+#
+# 2000/7/1
+# * add Eterm (Michael Jennings)
+#
+# 2000-07-18
+# * add amiga-vnc entry.
+#
+# 2000-08-12
+# * correct description of Top Gun Telnet.
+# * add kterm-color
+#
+# 2000-08-26
+# * add qansi* entries from QNX ftp site.
+#
+# 2000-09-16
+# * add Matrix Orbital entries by Eric Z. Ayers).
+# * add xterm-basic, xterm-sco entries, update related entries to XFree86
+# 4.0.1c -TD
+#
+# 2000-09-17
+# * add S0, E0 extensions to screen's entry -TD
+#
+# 2000-09-23
+# * several corrections based on tic's new parameter-checking code -TD
+# * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
+# bracketing sequences that reset video attributes (\E8 would restore
+# them) -TD
+#
+# 2000-11-11
+# * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
+#
+# 2000-12-16
+# * improved scoansi, based on SCO man-page, and testing console,
+# scoterm with tack -TD
+#
+# 2001-01-27
+# * modify kterm to use acsc via SCS controls.
+#
+# 2001-02-10
+# * screen 3.9.8 allows xterm mouse controls to pass-through
+#
+# 2001-03-11
+# * remove spurious "%|" from some xterm entries.
+#
+# 2001-03-31
+# * modify 'screen' khome/kend to match screen 3.09.08
+# * add examples of 'screen' customization (screen.xterm-xfree86,
+# screen.xterm-r6, screen.teraterm) -TD
+#
+# 2001-04-14
+# * correct definitions of shifted editing keys for xterm-xfree86 -TD
+# * add "Apple_Terminal" entries -Benjamin Sittler
+# * remove time-delays from "Apple_Terminal" entries -TD
+# * make sgr entries time-delays consistent with individual caps -TD
+#
+# 2001-05-05
+# * corrected/updated screen.xterm-xfree86
+#
+# 2001-05-19
+# * ELKS descriptions, from Federico Bianchi
+# * add u6 (CSR) to Eterm (Michael Jennings).
+#
+# 2001-07-21
+# * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
+# tic which handles names no longer than 14 characters. Add
+# corresponding descriptions for the Darwin PowerPC console named
+# "xnuppc" -Benjamin Sittler
+#
+# 2001-09-01
+# * change kbs in mach entries to ^? (Marcus Brinkmann).
+#
+# 2001-11-17
+# * add "putty" entry -TD
+# * updated "Apple_Terminal" entries -Benjamin Sittler
+#
+# 2001-11-24
+# * add ms-vt100-color entry -TD
+# * add "konsole" entries -TD
+#
+# 2001-12-08
+# * update gnome entry to Redhat 7.2 -TD
+#
+# 2002-05-25
+# * add kf13-kf48 strings to cons25w -TD
+# * add pcvt25-color entry -TD
+# * changed a few /usr/lib/tabset -> /usr/share/tabset.
+# * improve some features of scoansi entry based on SCO's version -TD
+# * add scoansi-new entry corresponding to OpenServer 5.0.6
+#
+# 2002-06-15
+# * add kcbt to screen entry -TD
+#
+# 2002-06-22
+# * add rxvt-16color, ibm+16color, mvterm entries -TD
+#
+# 2002-09-28
+# * split out linux-basic entry, making linux-c inherit from that, and
+# in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
+# the history of this console type -TD
+# * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
+# r/g/b parameters of initc are in the range 0 to 1000 -TD
+#
+# 2002-10-05
+# * minor fix for scale-factor of linux-c and linux-c-nc -TD
+#
+# 2002-11-09
+# * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
+# in the latter -TD
+#
+# 2002-11-16
+# * add entries for mterm (mterm, mterm-ansi, decansi) -TD
+# * ncr260wy350pp has only 16 color pairs -TD
+# * add sun-type4 from NetBSD -TD
+# * update xterm-xfree86 to current (patch 170) -TD
+# * add screen-bce, screen-s entries -TD
+# * add xterm-1002, xterm-1003 entries -TD
+#
+# 2003-01-11
+# * update homepage for Top Gun Telnet/SSH
+#
+# 2003-01-25
+# * reduce duplication in emx entries, added emx-base -TD
+#
+# 2003-05-24
+# * corrected acs for screen.teraterm -TD
+# * add tkterm entry -TD
+#
+# 2003-07-15
+# * cygwin changes from Charles Wilson:
+# misc/terminfo.src (nxterm|xterm-color): make xterm-color
+# primary instead of nxterm, to match XFree86's xterm.terminfo
+# usage and to prevent circular links.
+# (rxvt): add additional codes from rxvt.org.
+# (rxvt-color): new alias
+# (rxvt-xpm): new alias
+# (rxvt-cygwin): like rxvt, but with special acsc codes.
+# (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
+# with a "native" MSWin GUI. Each takes different acsc codes,
+# which are both different from the "normal" rxvt's acsc.
+# (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
+# (cygwinDBG): ditto.
+#
+# 2003-09-27
+# * update gnome terminal entries -TD
+#
+# 2003-10-04
+# * add entries for djgpp 2.03 and 2.04 -TD
+#
+# 2003-10-25
+# * add alias for vtnt -TD
+# * update xterm-xfree86 for XFree86 4.4 -TD
+#
+# 2003-11-22
+# * add linux-vt (Andrey V Lukyanov)
+#
+# 2003-12-20
+# * add screen.linux -TD
+#
+# 2004-01-10
+# * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
+#
+# 2004-01-17
+# * add OpenNT/Interix/SFU entries (Federico Bianchi)
+# * add vt100+ and vt-utf8 entries -TD
+# * add uwin entry -TD
+#
+# 2004-03-27
+# * add sgr strings to several common entries lacking them, e.g.,
+# screen, to make the entries more portable -TD
+# * remove cvvis from rxvt entry, since it is the same as cnorm -TD
+# * similar fixups for cvvis/cnorm various entries -TD
+#
+# 2004-05-22
+# * remove 'ncv' from xterm-256color (patch 188) -TD
+#
+# 2004-06-26
+# * add mlterm -TD
+# * add xterm-xf86-v44 -TD
+# * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
+# on G1 being used via an ISO-2022 escape sequence (report by
+# Juliusz Chroboczek) -TD
+# * add 'hurd' entry -TD
+#
+# 2004-07-03
+# * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
+# xterm-basic -TD
+# * align with xterm #192's use of xterm-new -TD
+# * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
+# * make xterm-new the default "xterm" -TD
+#
+# 2004-07-10
+# * minor fixes for emu -TD
+# * add emu-220
+# * add rmam/smam to linux (Trevor Van Bremen)
+# * change wyse acsc strings to use 'i' map rather than 'I' -TD
+# * fixes for avatar0 -TD
+# * fixes for vp3a+ -TD
+#
+# 2004-07-17
+# * add xterm-pc-fkeys -TD
+# * review/update gnome and gnome-rh90 entries (prompted by
+# Redhat Bugzilla #122815) -TD
+# * review/update konsole entries -TD
+# * add sgr, correct sgr0 for kterm and mlterm -TD
+# * correct tsl string in kterm -TD
+#
+# 2004-07-24
+# * make ncsa-m rmacs/smacs consistent with sgr -TD
+# * add sgr, rc/sc and ech to syscons entries -TD
+# * add function-keys to decansi -TD
+# * add sgr to mterm-ansi -TD
+# * add sgr, civis, cnorm to emu -TD
+# * correct/simplify cup in addrinfo -TD
+# * corrections for gnome and konsole entries
+# (Redhat Bugzilla #122815) -Hans de Goede
+# * modify DEC entries (vt220, etc), to add sgr string, and to use
+# ISO-2022 strings for rmacs/smacs -TD
+#
+# 2004-07-31
+# * rename xterm-pc-fkeys to xterm+pcfkeys -TD
+#
+# 2004-08-07
+# * improved putty entry -Robert de Bath
+#
+# 2004-08-14
+# * remove dch/dch1 from rxvt because they are implemented inconsistently
+# with the common usage of bce/ech -TD
+# * remove khome from vt220 (vt220's have no home key) -TD
+# * add rxvt+pcfkeys -TD
+#
+# 2004-08-21
+# * modify several entries to ensure xterm mouse and cursor visibility
+# are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
+# Eterm, screen. (The xterm entries are left alone - old ones for
+# compatibility, and the new ones do not require this change) -TD
+#
+# 2004-08-28
+# * add morphos entry -Pavel Fedin
+# * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
+# * corrected \E[5?l to \E[?5l in vt320 entries -TD
+#
+# 2004-11-20
+# * update wsvt25 entry -TD
+#
+# 2005-01-29
+# * update pairs for xterm-88color and xterm-256color to reflect the
+# ncurses extended-color support -TD
+#
+# 2005-02-26
+# * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
+# * add aixterm-16color to demonstrate 16-color capability -TD
+#
+# 2005-04-23
+# * add media-copy to vt100 -TD
+# * corrected acsc string for vt52 -TD
+#
+# 2005-04-30
+# * add kUP, kDN (user-defined shifted up/down arrow) definitions for
+# xterm-new -TD
+# * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
+#
+# 2005-05-07
+# * re-corrected acsc string for vt52 -TD
+#
+# 2005-05-28
+# * corrected sun-il sgr string which referred to bold and underline -TD
+# * add sun-color entry -TD
+#
+# 2005-07-23
+# * modify sgr0 in several entries to reset alternate-charset as in the
+# sgr string -TD
+# * modify sgr string of prism9 to better match the individual
+# attributes -TD
+#
+# 2005-10-15
+# * correct order of use= in rxvt-basic -TD
+#
+# 2005-10-26
+# * use kind/kri as shifted up/down cursor keys for xterm-new -TD
+#
+# 2005-11-12
+# * other minor fixes to cygwin based on tack -TD
+# * correct smacs in cygwin (report by Baurzhan Ismagulov).
+#
+# 2006-02-18
+# * add nsterm-16color entry -TD
+# * remove ncv flag from xterm-16color -TD
+# * remove setf/setb from xterm-256color to match xterm #209 -TD
+# * update mlterm entry to 2.9.2 -TD
+#
+# 2006-02-25
+# * fixes to make nsterm-16color match report
+# by Christian Ebert -Alain Bench
+#
+# 2006-04-22
+# * add xterm+256color building block -TD
+# * add gnome-256color, putty-256color, rxvt-256color -TD
+#
+# 2006-05-06
+# * add hpterm-color -TD
+#
+# 2006-06-24
+# * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
+# * add gnome-fc5 (prompted by GenToo #122566) -TD
+# * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
+# * improve xterm-256color by combining the ibm+16color setaf/setab
+# strings with SGR 48. The setf/setb strings also are cancelled here
+# rather than omitted so derived entries will cancel those also -Alain
+# Bench
+#
+# 2006-07-01
+# * add some notes regarding copyright to terminfo.src -TD
+# * use rxvt+pcfkeys in Eterm -TD
+# * remove km and flash from gnome, Eterm and rxvt since they do not work
+# as one would expect (km sends ESC rather than setting the 8th bit
+# of the key) -TD
+# * add/use ansi+enq, vt100+enq and vt102+enq -TD
+# * add konsole-solaris -TD
+#
+# 2006-07-22
+# * update xterm-sun and xterm-sco entries to match xterm #216 -TD
+# * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
+# * modify xterm-24 to inherit from "xterm" -TD
+# * add xiterm entry -TD
+# * add putty-vt100 entry -TD
+# * corrected spelling of Michael A Dorman's name, prompted by
+# http://www.advogato.org/person/mdorman/diary.html -TD
+#
+# 2006-08-05
+# * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
+# * update xterm+pcfkeys to match xterm #216 -TD
+#
+# 2006-08-17
+# * make descriptions of xterm entries consistent with its terminfo -TD
+#
+# 2006-08-26
+# * add xfce, mgt -TD
+#
+# 2006-09-02
+# * correct acsc string in kterm -TD
+#
+# 2006-09-09
+# * add kon entry -TD
+# * remove invis from linux and related entries, add klone+sgr8 for those
+# that implement the feature (or have not been shown to lack it) -TD
+#
+# 2006-09-23
+# * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
+# * minor improvements to rxvt+pcfkeys -TD
+#
+# 2006-09-30
+# * fix a few typos in if/then/else expressions -TD
+#
+# 2006-10-07
+# * add several GNU Screen variations with 16- and 256-colors, and
+# status line (Alain Bench).
+#
+# 2007-03-03
+# * add Newbury Data entries (Jean-Charles Billaud).
+#
+# 2007-06-10
+# * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
+#
+# 2007-07-14
+# * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
+# * add konsole-256color entry -TD
+#
+# 2007-08-18
+# * add 9term entry (request by Juhapekka Tolvanen) -TD
+#
+# 2007-10-13
+# * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
+# * add shift-control- and control-modified keys for rxvt editing
+# keypad -TD
+# * update mlterm entry to 2.9.3 -TD
+# * add mlterm+pcfkeys -TD
+#
+# 2007-10-20
+# * move kLFT, kRIT, kind and kri capabilities from xterm-new to
+# xterm+pcc0, etc., to make the corresponding building blocks reflect
+# xterm's capabilities -TD
+# * add mrxvt entry -TD
+# * add xterm+r6f2, use in mlterm and mrxvt entries -TD
+#
+# 2007-11-03
+# * correct acsc strings for h19 and z100 (Benjamin Sittler)
+#
+# 2007-11-11
+# * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
+# xterm starting with patch #216 -TD
+# * make legacy xterm entries such as xterm-24 inherit from xterm-old,
+# to match xterm #230 -TD
+# * extend xterm+pccX entries to match xterm #230 -TD
+# * add xterm+app, xterm+noapp, from xterm #230 -TD
+# * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
+#
+# 2008-04-19
+# * add screen.rxvt -TD
+#
+# 2008-04-28
+# * add screen+fkeys (prompted by Debian # 478094) -TD
+#
+# 2008-06-28
+# * add screen.mlterm -TD
+# * improve mlterm and mlterm+pcfkeys -TD
+#
+# 2008-08-23
+# * add Eterm-256color, Eterm-88color -TD
+# * add rxvt-88color -TD
+#
+# The following sets edit modes for GNU EMACS.
+# Local Variables:
+# fill-prefix:"\t"
+# fill-column:75
+# comment-column:0
+# comment-start-skip:"^#+"
+# comment-start:"# "
+# compile-command:"tic -c terminfo.master"
+# End:
+######## SHANTIH! SHANTIH! SHANTIH!